summaryrefslogtreecommitdiff
path: root/tools/usb
AgeCommit message (Collapse)Author
2017-08-31usbip: auto retry for concurrent attachNobuo Iwata
This patch adds recovery from false busy state on concurrent attach operation. The procedure of attach operation is as below. 1) Find an unused port in /sys/devices/platform/vhci_hcd/status. (userspace) 2) Request attach found port to driver through /sys/devices/platform/vhci_hcd/attach. (userspace) 3) Lock table, reserve requested port and unlock table. (vhci driver) Attaching more than one remote devices concurrently, same unused port number will be found in step-1. Then one request will succeed and others will fail even though there are some unused ports. With this patch, driver returns EBUSY when requested port has already been used. In this case, attach command retries from step-1: finding another unused port. If there's no unused port, the attach operation will fail in step-1. Otherwise it retries automatically using another unused port. vhci-hcd's interface (only errno) is changed as following. Current errno New errno Condition EINVAL same as left specified port number is in invalid range EAGAIN same as left platform_get_drvdata() failed EINVAL same as left specified socket fd is not valid EINVAL EBUSY specified port status is not free The errno EBUSY was not used in userspace src/usbip_attach.c:import_device(). It is needed to distinguish the condition to be able to retry from other unrecoverable errors. It is possible to avoid this failure by introducing userspace exclusive control. But it's exaggerated for this special condition. The locking itself has done in driver. As an alternate solution, userspace doesn't specify port number, driver searches unused port and it returns port number to the userspace. With this solution, the interface is much different than this patch. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-20Merge tag 'usb-for-v4.13' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing Felipe writes: usb: changes for v4.13 merge window This time around we have a total of 57 non-merge commits. A list of most important changes follows: - Improvements to dwc3 tracing interface - Initial dual-role support for dwc3 - Improvements to how we handle DMA resources in dwc3 - A new f_uac1 implementation which much more flexible - Removal of AVR32 bits - Improvements to f_mass_storage driver
2017-06-13usbip: vhci-hcd: Add USB3 SuperSpeed supportYuyang Du
This patch adds a USB3 HCD to an existing USB2 HCD and provides the support of SuperSpeed, in case the device can only be enumerated with SuperSpeed. The bulk of the added code in usb3_bos_desc and hub_control to support SuperSpeed is borrowed from the commit 1cd8fd2887e162ad ("usb: gadget: dummy_hcd: add SuperSpeed support"). With this patch, each vhci will have VHCI_HC_PORTS HighSpeed ports and VHCI_HC_PORTS SuperSpeed ports. Suggested-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usbip: vhci-hcd: Rework vhci_hcd_initYuyang Du
A vhci struct is added as the platform-specific data to the vhci platform device, in order to get the vhci by its platform device. This is done in vhci_hcd_init(). Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: usbip tool: Fix parse_status()Yuyang Du
In parse_status(), all nports number of idev's are initiated to 0 by memset(), it is simply wrong, because parse_status() reads the status sys file one by one, therefore, it can only update the according vhci_driver->idev's for it to parse. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: usbip tool: Fix refresh_imported_device_list()Yuyang Du
The commit 0775a9cbc694e8c7 ("usbip: vhci extension: modifications to vhci driver") introduced multiple controllers, but the status of the ports are only extracted from the first status file, fix it. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: usbip tool: Add ncontrollers in vhci_driver structureYuyang Du
A new field ncontrollers is added to the vhci_driver structure. And this field is stored by scanning the vhci_hcd* dirs in the platform udev. Suggested-and-reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13usb: usbip tool: Check the return of get_nports()Yuyang Du
If we get nonpositive number of ports, there is no sense to continue, then fail gracefully. In addition, the commit 0775a9cbc694e8c72 ("usbip: vhci extension: modifications to vhci driver") introduced configurable numbers of controllers and ports, but we have a static port number maximum, MAXNPORT. If exceeded, the idev array will be overflown. We fix it by validating the nports to make sure the port number max is not exceeded. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-02tools: usb: testusb: update default vary for superspeedFelipe Balbi
Currently, default vary will not accomodate superspeed endpoints causing unexpected babble errors in the IN direction. Let's update default 'vary' parameter so that we can maintain a "short-less" transfer as hinted at the comment. Reported-by: Ammy Yi <ammy.yi@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-04-18usb: fix some references for /proc/bus/usbMauro Carvalho Chehab
Since when we got rid of usbfs, the /proc/bus/usb is now elsewhere. Fix references for it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Serge Hallyn <serge@hallyn.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08usb: usbip tool: Fix get_nports()Yuyang Du
The commit 0775a9cbc694e8c72 ("usbip: vhci extension: modifications to vhci driver") introduced multiple controllers, and nports as a sys file, and claimed to read the nports from it, but it didn't. In addition, the get_nports() has been so wrong that even with 8 port lines for instance, it gets 7 (I am guessing it is due to a '\n' mess). Nevertheless, we fix it by reading the nports attribute. Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Yuyang Du <yuyang.du@intel.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usbip: Fix implicit fallthrough warningJonathan Dieter
GCC 7 now warns when switch statements fall through implicitly, and with -Werror enabled in configure.ac, that makes these tools unbuildable. We fix this by notifying the compiler that this particular case statement is meant to fall through. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Jonathan Dieter <jdieter@lesbg.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17usbip: Fix potential format overflow in userspace toolsJonathan Dieter
The usbip userspace tools call sprintf()/snprintf() and don't check for the return value which can lead the paths to overflow, truncating the final file in the path. More urgently, GCC 7 now warns that these aren't checked with -Wformat-overflow, and with -Werror enabled in configure.ac, that makes these tools unbuildable. This patch fixes these problems by replacing sprintf() with snprintf() in one place and adding checks for the return value of snprintf(). Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Jonathan Dieter <jdieter@lesbg.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-16tools/usb: Add .gitignore filePrarit Bhargava
Add .gitignore file for untracked files in tools/usb. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-26Merge tag 'usb-for-v4.11' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v4.11 Here's the big pull request for the Gadget API. Again the majority of changes sit in dwc2 driver. Most important changes contain a workaround for GOTGCTL being wrong, a sleep-inside-spinlock fix and the big series of cleanups on dwc2. One important thing on dwc3 is that we don't anymore need gadget drivers to cope with unaligned OUT transfers for us. We have support for appending one extra chained TRB to align transfer ourselves. Apart from these, the usual set of typos, non-critical fixes, etc.
2017-01-24tools: usb: ffs-test: add SS descriptorsFelipe Balbi
Without SS descriptors, we have no possibility of running on SS controllers such as DWC3. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24tools: usb: ffs-test: switch to _DEFAULT_SOURCEFelipe Balbi
_BSD_SOURCE is deprecated and gives a build warning. Let's use _DEFAULT_SOURCE instead. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-10tools: usb: usbip: Update READMEKrzysztof Opasiak
Update README file: - remove outdated parts - clarify terminology and general structure - add some description of vUDC Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-10tools: usb: usbip: Add simple script to show how to setup vUDCKrzysztof Opasiak
Add some simple script which creates a USB gadget using ConfigFS and then exports it using vUDC. This may be useful for people who just started playing with USB/IP and vUDC as it shows exact steps how to setup all stuff. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06usbip: add missing compile time generated files to .gitignoreShuah Khan
Add the following files to .gitignore compile libsrc/libusbip_la-sysfs_utils.lo libsrc/libusbip_la-usbip_device_driver.lo libsrc/libusbip_la-usbip_host_common.lo Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-07usbip: deletion of incorrect socket descriptor checkingNobuo Iwata
This patch removes checking of socket descriptor value in daemons. It was checked to be less than FD_SETSIZE(1024 usually) but it's not correct. To be exact, the maximum value of descriptor comes from rlimit(RLIMIT_NOFILE). Following kernel code determines the value : get_unused_fd_flags() : fs/files.c __alloc_fd() : fs/files.c expand_files() : fs/files.c The defalut (soft limit) is defines as INR_OPEN_CUR(1024) in include/linux/fs.h which is referenced form INIT_RLIMS in include/asm-generic/resource.h. The value may be modified with ulimt, sysctl, security configuration and etc. With the kernel code above, when socket() system call returns positive value, the value must be within rlimit(RLIMIT_NOFILE). No extra checking is needed when socket() returns positive. Without 'usbip: vhci number of ports extension' patch set, there's no practical problem because of number of USB port restriction. With the patch set, the value of socket descriptor can exceed FD_SETSIZE(1024 usually) if the rlimit is changed. Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03usbip: adding names db to port operationNobuo Iwata
Adding names database to port command. BEFORE) 'unknown' for vendor and product string. Imported USB devices ==================== Port 00: <Port in Use> at Low Speed(1.5Mbps) unknown vendor : unknown product (03f0:0224) 3-1 -> usbip://10.0.2.15:3240/5-1 -> remote bus/dev 005/002 AFTER) Most vendor string will be converted. Imported USB devices ==================== Port 00: <Port in Use> at Low Speed(1.5Mbps) Hewlett-Packard : unknown product (03f0:0224) 3-1 -> usbip://10.0.2.15:3240/5-1 -> remote bus/dev 005/002 Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usbip: tools: Start using VUDC backend in usbip toolsIgor Kotrasinski
Modify userspace tools to allow exporting and connecting to vudc. This commit is a result of cooperation between Samsung R&D Institute Poland and Open Operating Systems Student Society at University of Warsaw (O2S3@UW) consisting of: Igor Kotrasinski <ikotrasinsk@gmail.com> Karol Kosik <karo9@interia.eu> Ewelina Kosmider <3w3lfin@gmail.com> Dawid Lazarczyk <lazarczyk.dawid@gmail.com> Piotr Szulc <ps347277@students.mimuw.edu.pl> Tutor and project owner: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Ewelina Kosmider <3w3lfin@gmail.com> [Various bug fixes and improvements] Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usbip: tools: Add vudc backend to usbip toolsKrzysztof Opasiak
Adds an equivalent of usbip_host_driver for the vudc. Most of the code is already shared, but this adds some vudc specific code for getting information about devices. Based on code created in cooperation with Open Operating Systems Student Society at University of Warsaw (O2S3@UW) consisting of: Igor Kotrasinski <ikotrasinsk@gmail.com> Karol Kosik <karo9@interia.eu> Ewelina Kosmider <3w3lfin@gmail.com> Dawid Lazarczyk <lazarczyk.dawid@gmail.com> Piotr Szulc <ps347277@students.mimuw.edu.pl> Tutor and project owner: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-26usbip: tools: Extract generic code to be shared with vudc backendKrzysztof Opasiak
Extract the code from current stub driver backend and a common interface for both stub driver and vudc. This allows to share most of the usbipd code for both of them. Based on code created in cooperation with Open Operating Systems Student Society at University of Warsaw (O2S3@UW) consisting of: Igor Kotrasinski <ikotrasinsk@gmail.com> Karol Kosik <karo9@interia.eu> Ewelina Kosmider <3w3lfin@gmail.com> Dawid Lazarczyk <lazarczyk.dawid@gmail.com> Piotr Szulc <ps347277@students.mimuw.edu.pl> Tutor and project owner: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22Merge tag 'usb-for-v4.4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.4 merge window This pull request is large with a total of 136 non-merge commits. Because of its size, we will only describe the big things in broad terms. Many will be happy to know that dwc3 is now almost twice as fast after some profiling and speed improvements. Also in dwc3, John Youn from Synopsys added support for their new DWC USB3.1 IP Core and the HAPS platform which can be used to validate it. A series of patches from Robert Baldyga cleaned up uses of ep->driver_data as a flag for "claimed endpoint" in favor of the new ep->claimed flag. Sudip Mukherjee fixed a ton of really old problems on the amd5536udc driver. That should make a few people happy. Heikki Krogerus worked on converting dwc3 to the unified device property interface. Together with these, there's a ton of non-critical fixes, typos and stuff like that. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-27tools: usb: testusb: change the default value for length from 512 to 1024Peter Chen
For ctrl out test, it needs length > vary, so in order to run it with default parameters, we do this change. Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-27tools: usb: testusb: change the help textPeter Chen
The 'length' is the transfer length, not the packet size, so change the help text. Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-22tools: usbip: detach: avoid calling strlen() at each iterationEric Curtin
Instead of calling strlen on every iteration of the for loop, just call it once and cache the result in a temporary local variable which will be used in the for loop instead. Signed-off-by: Eric Curtin <ericcurtin17@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-15tools: ffs-aio-example: use endpoint addresses from descriptorsRobert Baldyga
This makes examples more platform independent and more compatible with USB standard, as endpoint addresses in given interface may differ between hardware platforms or even between configurations in single USB device. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-01-12tools: ffs-aio-example: add missing wMaxPacketSize for HS descsRobert Baldyga
It's needed, to have more than 64 bytes of maxpacketsize. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-12-14Merge tag 'usb-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big set of USB and PHY patches for 3.19-rc1. The normal churn in the USB gadget area is in here, as well as xhci and other individual USB driver updates. The PHY tree is also in here, as there were dependancies on the USB tree. All of these have been in linux-next" * tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits) arm: omap3: twl: remove usb phy init data usbip: fix error handling in stub_probe() usb: gadget: udc: missing curly braces USB: mos7720: delete some unneeded code wusb: replace memset by memzero_explicit usbip: remove unneeded structure usb: xhci: fix comment for PORT_DEV_REMOVE xhci: don't use the same variable for stopped and halted rings current TD xhci: clear extra bits from slot context when setting max exit latency xhci: cleanup finish_td function USB: adutux: NULL dereferences on disconnect usb: chipidea: fix platform_no_drv_owner.cocci warnings usb: chipidea: Fixed a few typos in comments Documentation: bindings: add doc for the USB2 ChipIdea USB driver usb: chipidea: add a usb2 driver for ci13xxx usb: chipidea: fix phy handling usb: chipidea: remove duplicate dev_set_drvdata for host_start usb: chipidea: parameter 'mode' isn't needed for hw_device_reset usb: chipidea: add controller reset API usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER ...
2014-12-02usbip: remove unneeded structureJulia Lawall
Delete a local structure that is only used to be initialized by memset. A semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x,i; @@ { ... when any -struct i x; <+... when != x - memset(&x,...); ...+> } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-20treewide: fix typo in printk and KconfigMasanari Iida
This patch fix spelling typo in printk and Kconfig within various part of kernel sources. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-20Replace mentions of "list_struct" to "list_head"Andrey Utkin
There's no such thing as "list_struct". Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-16Merge tag 'v3.17-rc5' into nextFelipe Balbi
Linux 3.17-rc5 Signed-off-by: Felipe Balbi <balbi@ti.com> Conflicts: Documentation/devicetree/bindings/usb/mxs-phy.txt drivers/usb/phy/phy-mxs-usb.c
2014-09-08Merge tag 'v3.17-rc4' into nextFelipe Balbi
Merge Linux 3.17-rc4 here so we have all the latest fixes on next too. This also cleans up a few conflicts when applying patches. Signed-off-by: Felipe Balbi <balbi@ti.com> Conflicts: drivers/usb/gadget/Makefile drivers/usb/gadget/function/Makefile drivers/usb/gadget/legacy/Makefile drivers/usb/phy/phy-samsung-usb.h
2014-09-04usb: usbip: fix usbip.h path in userspace toolPiotr Król
Fixes: 588b48caf65c ("usbip: move usbip userspace code out of staging") which introduced build failure by not changing uapi/usbip.h include path according to new location. Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-02tools: ffs-test: add compatibility code for old kernelsMichal Nazarewicz
If ffs-test is used with a kernel prior to 3.14, which do not support the new descriptors format, it will fail when trying to write the descriptors. Add a function that converts the new descriptors to the legacy ones and use it to retry writing the descriptors using the legacy format. Also add “-l” flag to ffs-test which will cause the tool to never try the new format and instead immediatelly try the legacy one. This should be useful to test whether parsing of the old format still works on given 3.14+ kernel. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-02tools: ffs-test: convert to new descriptor formatMichal Nazarewicz
Since commit [ac8dde11: “Add flags to descriptors block”] functionfs supports a new, more powerful and extensible, descriptor format. Since ffs-test is probably the first thing users of the functionfs interface see when they start writing functionfs user space daemons, convert it to use the new format thus promoting it. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-08-25usbip: move usbip userspace code out of stagingValentina Manea
At this point, USB/IP userspace code is fully functional and can be moved out of staging. Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-21Merge tag 'usb-for-v3.17' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.17 merge window Surprisingly enough, while a big set of patches, the majority is composed of cleanups (using devm_*, fixing sparse errors, moving code around, adding const, etc). The highlights are addition of new support for PLX USB338x devices, and support for USB 2.0-only configurations of the DWC3 IP core. Signed-of-by: Felipe Balbi <balbi@ti.com>
2014-06-30tools: ffs-test: fix header values endianessMichal Nazarewicz
It appears that no one ever run ffs-test on a big-endian machine, since it used cpu-endianess for fs_count and hs_count fields which should be in little-endian format. Fix by wrapping the numbers in cpu_to_le32. Cc: stable@vger.kernel.org Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-30tools: ffs-aio-example: add license informationRobert Baldyga
Add missing information about license. Some people will probably want to reuse this code in their projects released under variety of licenses. For this reason this example is under Public Domain license to avoid GPL limitations. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-30tools: ffs-aio-example: convert to new descriptor formatRobert Baldyga
Since commit [ac8dde11: “Add flags to descriptors block”] functionfs supports a new descriptor format, so we update example application to make it using recomended version of descriptors. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-30tools: ffs-aio-example: fix header values endianessRobert Baldyga
We wrap numeric values of fs_count and hs_count fields in htole32, because they should be in little-endian format. Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-06-27Revert "tools: ffs-test: convert to new descriptor format fixing compilation ↵Felipe Balbi
error" This reverts commit f2af74123f8c5a735248547f4286a3adc28633c1. There is a better fix for this build error coming in a following patch. Signed-of-by: Felipe Balbi <balbi@ti.com>
2014-06-19tools: ffs-test: convert to new descriptor format fixing compilation errorMichal Nazarewicz
Commit [ac8dde11: “usb: gadget: f_fs: Add flags to descriptors block”] which introduced a new descriptor format for FunctionFS removed the usb_functionfs_descs_head structure, which is still used by ffs-test. tool. Convert ffs-test by converting it to use the new header format. For testing kernels prior to 3.14 (when the new format was introduced) and parsing of the legacy headers in the new kernels, provide a compilation flag to make the tool use the old format. Finally, include information as to when the legacy FunctionFS headers format has been deprecated (which is also when the new one has been introduced). Reported-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14tools: usb: aio example applicationsRobert Baldyga
This patch adds two example applications showing usage of Asynchronous I/O API of FunctionFS. First one (aio_simple) is simple example of bidirectional data transfer. Second one (aio_multibuff) shows multi-buffer data transfer, which may to be used in high performance applications. Both examples contains userspace applications for device and for host. It needs libaio library on the device, and libusb library on host. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-04usb: tools: fix a regression issue that gcc can't link to pthreadHuang Rui
Reproduce: ray@hr-bak:~/usb$ make -C tools/usb/ make: Entering directory `/home/ray/usb/tools/usb' gcc -Wall -Wextra -g -lpthread -I../include -o testusb testusb.c /tmp/cc0EMxfy.o: In function `main': /home/ray/usb/tools/usb/testusb.c:508: undefined reference to `pthread_create' /home/ray/usb/tools/usb/testusb.c:531: undefined reference to `pthread_join' collect2: error: ld returned 1 exit status make: *** [testusb] Error 1 make: Leaving directory `/home/ray/usb/tools/usb' Comments: In the latest version (4.7.3) of gcc compiler, it requres that libraries must follow the object or source files like below: "gcc hello.c -lpthread" instead of "gcc -lpthread hello.c" And it isn't encountered at gcc version 4.7.2. So this patch fix to move the pthread option after testusb.c. Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2024-05-18 05:59:52 +0000