summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2020-03-21Merge branch 'linus' into locking/kcsan, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-21Merge branch 'x86/kdump' into locking/kcsan, to resolve conflictsIngo Molnar
Conflicts: arch/x86/purgatory/Makefile Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-15Merge tag 'perf-urgent-2020-03-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A pile of perf fixes: Kernel side: - AMD uncore driver: Replace the open coded sanity check with the core variant, which provides the correct error code and also leaves a hint in dmesg Tooling: - Fix the stdio input handling with glibc versions >= 2.28 - Unbreak the futex-wake benchmark which was reduced to 0 test threads due to the conversion to cpumaps - Initialize sigaction structs before invoking sys_sigactio() - Plug the mapfile memory leak in perf jevents - Fix off by one relative directory includes - Fix an undefined string comparison in perf diff" * tag 'perf-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag tools: Fix off-by 1 relative directory includes perf jevents: Fix leak of mapfile memory perf bench: Clear struct sigaction before sigaction() syscall perf bench futex-wake: Restore thread count default to online CPU count perf top: Fix stdio interface input handling with glibc 2.28+ perf diff: Fix undefined string comparision spotted by clang's -Wstring-compare perf symbols: Don't try to find a vmlinux file when looking for kernel modules perf bench: Share some global variables to fix build with gcc 10 perf parse-events: Use asprintf() instead of strncpy() to read tracepoint files perf env: Do not return pointers to local variables perf tests bp_account: Make global variable static
2020-03-13Merge tag 'pm-5.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix cpupower utility build failures with -fno-common enabled (Mike Gilbert)" * tag 'pm-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpupower: avoid multiple definition with gcc -fno-common
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "It looks like a decent sized set of fixes, but a lot of these are one liner off-by-one and similar type changes: 1) Fix netlink header pointer to calcular bad attribute offset reported to user. From Pablo Neira Ayuso. 2) Don't double clear PHY interrupts when ->did_interrupt is set, from Heiner Kallweit. 3) Add missing validation of various (devlink, nl802154, fib, etc.) attributes, from Jakub Kicinski. 4) Missing *pos increments in various netfilter seq_next ops, from Vasily Averin. 5) Missing break in of_mdiobus_register() loop, from Dajun Jin. 6) Don't double bump tx_dropped in veth driver, from Jiang Lidong. 7) Work around FMAN erratum A050385, from Madalin Bucur. 8) Make sure ARP header is pulled early enough in bonding driver, from Eric Dumazet. 9) Do a cond_resched() during multicast processing of ipvlan and macvlan, from Mahesh Bandewar. 10) Don't attach cgroups to unrelated sockets when in interrupt context, from Shakeel Butt. 11) Fix tpacket ring state management when encountering unknown GSO types. From Willem de Bruijn. 12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend() only in the suspend context. From Heiner Kallweit" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) net: systemport: fix index check to avoid an array out of bounds access tc-testing: add ETS scheduler to tdc build configuration net: phy: fix MDIO bus PM PHY resuming net: hns3: clear port base VLAN when unload PF net: hns3: fix RMW issue for VLAN filter switch net: hns3: fix VF VLAN table entries inconsistent issue net: hns3: fix "tc qdisc del" failed issue taprio: Fix sending packets without dequeueing them net: mvmdio: avoid error message for optional IRQ net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register net: memcg: fix lockdep splat in inet_csk_accept() s390/qeth: implement smarter resizing of the RX buffer pool s390/qeth: refactor buffer pool code s390/qeth: use page pointers to manage RX buffer pool seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed net/packet: tpacket_rcv: do not increment ring index on drop sxgbe: Fix off by one in samsung driver strncpy size arg net: caif: Add lockdep expression to RCU traversal primitive MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer ...
2020-03-12tc-testing: add ETS scheduler to tdc build configurationDavide Caratti
add CONFIG_NET_SCH_ETS to 'config', otherwise test suites using this file to perform a full tdc run will encounter the following warning: ok 645 e90e - Add ETS qdisc using bands # skipped - "-----> teardown stage" did not complete successfully Fixes: 82c664b69c8b ("selftests: qdiscs: Add test coverage for ETS Qdisc") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10Merge tag 'linux-cpupower-5.6-rc6' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux Pull cpupower utility fix for v5.6 from Shuah Khan: "This cpupower update for Linux 5.6-rc6 consists of a fix from Mike Gilbert for build failures when -fno-common is enabled. -fno-common will be default in gcc v10." * tag 'linux-cpupower-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux: cpupower: avoid multiple definition with gcc -fno-common
2020-03-09Merge tag 'ktest-v5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest Pull Ktest fixes and clean ups from Steven Rostedt: - Make the default option oldconfig instead of randconfig (one too many times I lost my config because I left the build type out) - Add timeout to ssh sync to sync before reboot (prevents test hangs) - A couple of spelling fix patches * tag 'ktest-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Fix typos in ktest.pl ktest: Add timeout for ssh sync testing ktest: Make default build option oldconfig not randconfig ktest: Fix some typos in sample.conf
2020-03-09ktest: Fix typos in ktest.plMasanari Iida
This patch fixes multipe spelling typo found in ktest.pl. Link: http://lkml.kernel.org/r/20200309115430.57540-1-standby24x7@gmail.com Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-03-09ktest: Add timeout for ssh sync testingSteven Rostedt (VMware)
Before rebooting the box, a "ssh sync" is called to the test machine to see if it is alive or not. But if the test machine is in a partial state, that ssh may never actually finish, and the ktest test hangs. Add a 10 second timeout to the sync test, which will fail after 10 seconds and then cause the test to reboot the test machine. Cc: stable@vger.kernel.org Fixes: 6474ace999edd ("ktest.pl: Powercycle the box on reboot if no connection can be made") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-03-09ktest: Make default build option oldconfig not randconfigSteven Rostedt (VMware)
For the last time, I screwed up my ktest config file, and the build went into the default "randconfig", blowing away the .config that I had set up. The reason for the default randconfig was because when this was first written, I wanted to do a bunch of randconfigs. But as time progressed, ktest isn't about randconfig anymore, and because randconfig destroys the config in the build directory, it's a dangerous default to have. Use oldconfig as the default. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-03-09ktest: Fix some typos in sample.confMasanari Iida
This patch fixes some spelling typo in sample.conf Link: http://lkml.kernel.org/r/20190930124925.20250-1-standby24x7@gmail.com Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-03-07Merge tag 'for-linus-2020-03-07' of ↵Linus Torvalds
gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux Pull thread fixes from Christian Brauner: "Here are a few hopefully uncontroversial fixes: - Use RCU_INIT_POINTER() when initializing rcu protected members in task_struct to fix sparse warnings. - Add pidfd_fdinfo_test binary to .gitignore file" * tag 'for-linus-2020-03-07' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux: selftests: pidfd: Add pidfd_fdinfo_test in .gitignore exit: Fix Sparse errors and warnings fork: Use RCU_INIT_POINTER() instead of rcu_access_pointer()
2020-03-06Merge tag 'linux-kselftest-5.6-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest update from Shuah Khan: "This consists of a cleanup patch to undo changes to global .gitignore that added selftests/lkdtm objects and add them to a local selftests/lkdtm/.gitignore. Summary of Linus's comments on local vs. global gitignore scope: - Keep local gitignore patterns in local files. - Put only global gitignore patterns in the top-level gitignore file. Local scope keeps things much better separated. It also incidentally means that if a directory gets renamed, the gitignore file continues to work unless in the case of renaming the actual files themselves that are named in the gitignore" * tag 'linux-kselftest-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftest/lkdtm: Use local .gitignore
2020-03-06tools: Fix off-by 1 relative directory includesIan Rogers
This is currently working due to extra include paths in the build. Committer testing: $ cd tools/include/uapi/asm/ Before this patch: $ ls -la ../../arch/x86/include/uapi/asm/errno.h ls: cannot access '../../arch/x86/include/uapi/asm/errno.h': No such file or directory $ After this patch; $ ls -la ../../../arch/x86/include/uapi/asm/errno.h -rw-rw-r--. 1 acme acme 31 Feb 20 12:42 ../../../arch/x86/include/uapi/asm/errno.h $ Check that that is still under tools/, i.e. hasn't escaped into the main kernel sources: $ cd ../../../arch/x86/include/uapi/asm/ $ pwd /home/acme/git/perf/tools/arch/x86/include/uapi/asm $ Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Igor Lubashev <ilubashe@akamai.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Li <liwei391@huawei.com> Link: http://lore.kernel.org/lkml/20200306071110.130202-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-06perf jevents: Fix leak of mapfile memoryJohn Garry
The memory for global pointer is never freed during normal program execution, so let's do that in the main function exit as a good programming practice. A stray blank line is also removed. Reported-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: James Clark <james.clark@arm.com> Cc: Joakim Zhang <qiangqing.zhang@nxp.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linuxarm@huawei.com Link: http://lore.kernel.org/lkml/1583406486-154841-2-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-06perf bench: Clear struct sigaction before sigaction() syscallTommi Rantala
Avoid garbage in sigaction structs used in sigaction() syscalls. Valgrind is complaining about it. Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20200305083714.9381-4-tommi.t.rantala@nokia.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-06perf bench futex-wake: Restore thread count default to online CPU countTommi Rantala
Since commit 3b2323c2c1c4 ("perf bench futex: Use cpumaps") the default number of threads the benchmark uses got changed from number of online CPUs to zero: $ perf bench futex wake # Running 'futex/wake' benchmark: Run summary [PID 15930]: blocking on 0 threads (at [private] futex 0x558b8ee4bfac), waking up 1 at a time. [Run 1]: Wokeup 0 of 0 threads in 0.0000 ms [...] [Run 10]: Wokeup 0 of 0 threads in 0.0000 ms Wokeup 0 of 0 threads in 0.0004 ms (+-40.82%) Restore the old behavior by grabbing the number of online CPUs via cpu->nr: $ perf bench futex wake # Running 'futex/wake' benchmark: Run summary [PID 18356]: blocking on 8 threads (at [private] futex 0xb3e62c), waking up 1 at a time. [Run 1]: Wokeup 8 of 8 threads in 0.0260 ms [...] [Run 10]: Wokeup 8 of 8 threads in 0.0270 ms Wokeup 8 of 8 threads in 0.0419 ms (+-24.35%) Fixes: 3b2323c2c1c4 ("perf bench futex: Use cpumaps") Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20200305083714.9381-3-tommi.t.rantala@nokia.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-06perf top: Fix stdio interface input handling with glibc 2.28+Tommi Rantala
Since glibc 2.28 when running 'perf top --stdio', input handling no longer works, but hitting any key always just prints the "Mapped keys" help text. To fix it, call clearerr() in the display_thread() loop to clear any EOF sticky errors, as instructed in the glibc NEWS file (https://sourceware.org/git/?p=glibc.git;a=blob;f=NEWS): * All stdio functions now treat end-of-file as a sticky condition. If you read from a file until EOF, and then the file is enlarged by another process, you must call clearerr or another function with the same effect (e.g. fseek, rewind) before you can read the additional data. This corrects a longstanding C99 conformance bug. It is most likely to affect programs that use stdio to read interactive input from a terminal. (Bug #1190.) Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200305083714.9381-2-tommi.t.rantala@nokia.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-06perf diff: Fix undefined string comparision spotted by clang's -Wstring-compareNick Desaulniers
clang warns: util/block-info.c:298:18: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/block-info.c:298:51: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/block-info.c:298:18: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/block-info.c:298:51: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/map.c:434:15: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if (srcline != SRCLINE_UNKNOWN) ^ ~~~~~~~~~~~~~~~ Reviewer Notes: Looks good to me. Some more context: https://clang.llvm.org/docs/DiagnosticsReference.html#wstring-compare The spec says: J.1 Unspecified behavior The following are unspecified: .. Whether two string literals result in distinct arrays (6.4.5). Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com> Reviewed-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Keeping <john@metanate.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: clang-built-linux@googlegroups.com Link: https://github.com/ClangBuiltLinux/linux/issues/900 Link: http://lore.kernel.org/lkml/20200223193456.25291-1-nick.desaulniers@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-04Merge tag 'perf-urgent-for-mingo-5.6-20200303' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: perf symbols: Arnaldo Carvalho de Melo: - Don't try to find a vmlinux file when looking for kernel modules, fixing symbol resolution in systems with compressed kernel modules. perf env: Arnaldo Carvalho de Melo: - Do not return pointers to local variables, fixing valid warning from gcc 10 for corner case that stops the build due to -Werror. perf tests: Arnaldo Carvalho de Melo: - Make global variable static in the bp_account entry to fix build with gcc 10. perf parse-events: Arnaldo Carvalho de Melo: - Use asprintf() instead of strncpy() to read tracepoint files, addressing compiler warning that stops the build as we use -Werror. perf bench: Arnaldo Carvalho de Melo: - Share some global variables to fix build with gcc 10. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-03-03selftests/net/fib_tests: update addr_metric_test for peer route testingHangbin Liu
This patch update {ipv4, ipv6}_addr_metric_test with 1. Set metric of address with peer route and see if the route added correctly. 2. Modify metric and peer address for peer route and see if the route changed correctly. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03perf symbols: Don't try to find a vmlinux file when looking for kernel modulesArnaldo Carvalho de Melo
The dso->kernel value is now set to everything that is in machine->kmaps, but that was being used to decide if vmlinux lookup is needed, which ended up making that lookup be made for kernel modules, that now have dso->kernel set, leading to these kinds of warnings when running on a machine with compressed kernel modules, like fedora:31: [root@five ~]# perf record -F 10000 -a sleep 2 [ perf record: Woken up 1 times to write data ] lzma: fopen failed on vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory' lzma: fopen failed on vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory' lzma: fopen failed on vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory' lzma: fopen failed on vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory' lzma: fopen failed on vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux: 'No such file or directory' lzma: fopen failed on /boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /usr/lib/debug/boot/vmlinux-5.5.5-200.fc31.x86_64: 'No such file or directory' lzma: fopen failed on /lib/modules/5.5.5-200.fc31.x86_64/build/vmlinux: 'No such file or directory' [ perf record: Captured and wrote 1.024 MB perf.data (1366 samples) ] [root@five ~]# This happens when collecting the buildid, when we find samples for kernel modules, fix it by checking if the looked up DSO is a kernel module by other means. Fixes: 02213cec64bb ("perf maps: Mark module DSOs with kernel type") Tested-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200302191007.GD10335@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-03perf bench: Share some global variables to fix build with gcc 10Arnaldo Carvalho de Melo
Noticed with gcc 10 (fedora rawhide) that those variables were not being declared as static, so end up with: ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here make[4]: *** [/git/perf/tools/build/Makefile.build:145: /tmp/build/perf/bench/perf-in.o] Error 1 Prefix those with bench__ and add them to bench/bench.h, so that we can share those on the tools needing to access those variables from signal handlers. Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200303155811.GD13702@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-02cpupower: avoid multiple definition with gcc -fno-commonMike Gilbert
Building cpupower with -fno-common in CFLAGS results in errors due to multiple definitions of the 'cpu_count' and 'start_time' variables. ./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28: multiple definition of `cpu_count'; ./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28: first defined here ... ./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22: multiple definition of `start_time'; ./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85: first defined here The -fno-common option will be enabled by default in GCC 10. Bug: https://bugs.gentoo.org/707462 Signed-off-by: Mike Gilbert <floppym@gentoo.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-03-02selftest/lkdtm: Use local .gitignoreChristophe Leroy
Commit 68ca0fd272da ("selftest/lkdtm: Don't pollute 'git status'") introduced patterns for git to ignore files generated in tools/testing/selftests/lkdtm/ Use local .gitignore file instead of using the root one. Fixes: 68ca0fd272da ("selftest/lkdtm: Don't pollute 'git status'") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-03-02perf parse-events: Use asprintf() instead of strncpy() to read tracepoint filesArnaldo Carvalho de Melo
Make the code more compact by using asprintf() instead of malloc()+strncpy() which also uses less memory and avoids these warnings with gcc 10: CC /tmp/build/perf/util/cloexec.o In file included from /usr/include/string.h:495, from util/parse-events.h:12, from util/parse-events.c:18: In function ‘strncpy’, inlined from ‘tracepoint_id_to_path’ at util/parse-events.c:271:5: /usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ offset [275, 511] from the object at ‘sys_dirent’ is out of the bounds of referenced subobject ‘d_name’ with type ‘char[256]’ at offset 19 [-Werror=array-bounds] 106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/dirent.h:61, from util/parse-events.c:5: util/parse-events.c: In function ‘tracepoint_id_to_path’: /usr/include/bits/dirent.h:33:10: note: subobject ‘d_name’ declared here 33 | char d_name[256]; /* We must not include limits.h! */ | ^~~~~~ In file included from /usr/include/string.h:495, from util/parse-events.h:12, from util/parse-events.c:18: In function ‘strncpy’, inlined from ‘tracepoint_id_to_path’ at util/parse-events.c:273:5: /usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ offset [275, 511] from the object at ‘evt_dirent’ is out of the bounds of referenced subobject ‘d_name’ with type ‘char[256]’ at offset 19 [-Werror=array-bounds] 106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from /usr/include/dirent.h:61, from util/parse-events.c:5: util/parse-events.c: In function ‘tracepoint_id_to_path’: /usr/include/bits/dirent.h:33:10: note: subobject ‘d_name’ declared here 33 | char d_name[256]; /* We must not include limits.h! */ | ^~~~~~ CC /tmp/build/perf/util/call-path.o Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200302145535.GA28183@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-02perf env: Do not return pointers to local variablesArnaldo Carvalho de Melo
It is possible to return a pointer to a local variable when looking up the architecture name for the running system and no normalization is done on that value, i.e. we may end up returning the uts.machine local variable. While this doesn't happen on most arches, as normalization takes place, lets fix this by making that a static variable and optimize it a bit by not always running uname(), only the first time. Noticed in fedora rawhide running with: [perfbuilder@a5ff49d6e6e4 ~]$ gcc --version gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8) Reported-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-02perf tests bp_account: Make global variable staticArnaldo Carvalho de Melo
To fix the build with newer gccs, that without this patch exit with: LD /tmp/build/perf/tests/perf-in.o ld: /tmp/build/perf/tests/bp_account.o:/git/perf/tools/perf/tests/bp_account.c:22: multiple definition of `the_var'; /tmp/build/perf/tests/bp_signal.o:/git/perf/tools/perf/tests/bp_signal.c:38: first defined here make[4]: *** [/git/perf/tools/build/Makefile.build:145: /tmp/build/perf/tests/perf-in.o] Error 1 First noticed in fedora:rawhide/32 with: [perfbuilder@a5ff49d6e6e4 ~]$ gcc --version gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8) Reported-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-02Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "No kernel side changes, all tooling fixes plus two tooling cleanups that were committed late in the merge window alongside the perf annotate fixes, delayed by Arnaldo's European trip" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) perf annotate: Fix segfault with source toggle perf annotate: Align struct annotate_args perf annotate: Simplify disasm_line allocation and freeing code perf annotate: Remove privsize from symbol__annotate() args perf probe: Check return value of strlist__add() for -ENOMEM perf config: Document missing config options perf annotate: Fix perf config option description perf annotate: Prefer cmdline option over default config perf annotate: Make perf config effective perf config: Introduce perf_config_u8() perf annotate: Fix --show-nr-samples for tui/stdio2 perf annotate: Fix --show-total-period for tui/stdio2 perf annotate/tui: Re-render title bar after switching back from script browser tools headers UAPI: Update tools's copy of kvm.h headers tools arch x86: Sync the msr-index.h copy with the kernel sources perf arch powerpc: Sync powerpc syscall.tbl with the kernel sources perf auxtrace: Add auxtrace_record__read_finish() perf arm-spe: Fix endless record after being terminated perf cs-etm: Fix endless record after being terminated perf intel-bts: Fix endless record after being terminated ...
2020-02-28selftests: pidfd: Add pidfd_fdinfo_test in .gitignoreChristophe Leroy
The commit identified below added pidfd_fdinfo_test but failed to add it to .gitignore Fixes: 2def297ec7fb ("pidfd: add tests for NSpid info in fdinfo") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/966567c7dbaa26a06730d796354f8a086c0ee288.1582847778.git.christophe.leroy@c-s.fr Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix leak in nl80211 AP start where we leak the ACL memory, from Johannes Berg. 2) Fix double mutex unlock in mac80211, from Andrei Otcheretianski. 3) Fix RCU stall in ipset, from Jozsef Kadlecsik. 4) Fix devlink locking in devlink_dpipe_table_register, from Madhuparna Bhowmik. 5) Fix race causing TX hang in ll_temac, from Esben Haabendal. 6) Stale eth hdr pointer in br_dev_xmit(), from Nikolay Aleksandrov. 7) Fix TX hash calculation bounds checking wrt. tc rules, from Amritha Nambiar. 8) Size netlink responses properly in schedule action code to take into consideration TCA_ACT_FLAGS. From Jiri Pirko. 9) Fix firmware paths for mscc PHY driver, from Antoine Tenart. 10) Don't register stmmac notifier multiple times, from Aaro Koskinen. 11) Various rmnet bug fixes, from Taehee Yoo. 12) Fix vsock deadlock in vsock transport release, from Stefano Garzarella. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits) net: dsa: mv88e6xxx: Fix masking of egress port mlxsw: pci: Wait longer before accessing the device after reset sfc: fix timestamp reconstruction at 16-bit rollover points vsock: fix potential deadlock in transport->release() unix: It's CONFIG_PROC_FS not CONFIG_PROCFS net: rmnet: fix packet forwarding in rmnet bridge mode net: rmnet: fix bridge mode bugs net: rmnet: use upper/lower device infrastructure net: rmnet: do not allow to change mux id if mux id is duplicated net: rmnet: remove rcu_read_lock in rmnet_force_unassociate_device() net: rmnet: fix suspicious RCU usage net: rmnet: fix NULL pointer dereference in rmnet_changelink() net: rmnet: fix NULL pointer dereference in rmnet_newlink() net: phy: marvell: don't interpret PHY status unless resolved mlx5: register lag notifier for init network namespace only unix: define and set show_fdinfo only if procfs is enabled hinic: fix a bug of rss configuration hinic: fix a bug of setting hw_ioctxt hinic: fix a irq affinity bug net/smc: check for valid ib_client_data ...
2020-02-27perf annotate: Fix segfault with source toggleRavi Bangoria
While rendering annotate browser from perf report tui, we keep track of total number of lines(asm + source) in annotation->nr_entries and total number of asm lines in annotation->nr_asm_entries. But we don't reset them before starting. Thus if user annotates same function multiple times, we restart incrementing these fields with old values. This causes a segfault when user tries to toggle source code after annotating same function multiple times. Fix it. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: http://lore.kernel.org/lkml/20200204045233.474937-5-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf annotate: Align struct annotate_argsRavi Bangoria
Align fields of struct annotate_args. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: http://lore.kernel.org/lkml/20200204045233.474937-4-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf annotate: Simplify disasm_line allocation and freeing codeRavi Bangoria
We are allocating disasm_line object in annotation_line__new() instead of disasm_line__new(). Similarly annotation_line__delete() is actually freeing disasm_line object as well. This complexity is because of privsize. But we don't need privsize anymore so get rid of privsize and simplify disasm_line allocation and freeing code. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: http://lore.kernel.org/lkml/20200204045233.474937-3-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf annotate: Remove privsize from symbol__annotate() argsRavi Bangoria
privsize is passed as 0 from all the symbol__annotate() callers. Remove it from argument list. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: http://lore.kernel.org/lkml/20200204045233.474937-2-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf probe: Check return value of strlist__add() for -ENOMEMHe Zhe
strlist__add() may fail with -ENOMEM. Check it and give debugging hint in advance. Signed-off-by: He Zhe <zhe.he@windriver.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/1582727404-180095-1-git-send-email-zhe.he@windriver.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf config: Document missing config optionsRavi Bangoria
While documenting annotate.show_nr_samples config option, I found many other config options missing in perf-config documentation. Add them. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-9-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf annotate: Fix perf config option descriptionRavi Bangoria
perf config annotate options says it works only with TUI, which is wrong. Most of the TUI options are applicable to stdio2 as well. So remove that generic line and add individual line with each option stating which browsers supports that option. Also, annotate.show_nr_samples config is missing in Documentation. Describe it. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-8-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf annotate: Prefer cmdline option over default configRavi Bangoria
For all the perf-config options that can also be set from command line option, the preference is given to command line version in case of any conflict. But that's opposite in case of perf annotate. i.e. the more preference is given to default option rather than command line option. Fix it. Before: $ ./perf config annotate.show_nr_samples=false $ ./perf annotate shash --show-nr-samples Percent│ │24: mov -0xc(%rbp),%eax 49.19 │ imul $0x1003f,%eax,%ecx │ mov -0x18(%rbp),%rax After: Samples│ │24: mov -0xc(%rbp),%eax 1 │ imul $0x1003f,%eax,%ecx │ mov -0x18(%rbp),%rax Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-7-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf annotate: Make perf config effectiveRavi Bangoria
perf default config set by user in [annotate] section is totally ignored by annotate code. Fix it. Before: $ ./perf config annotate.hide_src_code=true annotate.show_nr_jumps=true annotate.show_nr_samples=true $ ./perf annotate shash │ unsigned h = 0; │ movl $0x0,-0xc(%rbp) │ while (*s) │ ↓ jmp 44 │ h = 65599 * h + *s++; 11.33 │24: mov -0xc(%rbp),%eax 43.50 │ imul $0x1003f,%eax,%ecx │ mov -0x18(%rbp),%rax After: │ movl $0x0,-0xc(%rbp) │ ↓ jmp 44 1 │1 24: mov -0xc(%rbp),%eax 4 │ imul $0x1003f,%eax,%ecx │ mov -0x18(%rbp),%rax Note that we have removed show_nr_samples and show_total_period from annotation_options because they are not used. Instead of them we use symbol_conf.show_nr_samples and symbol_conf.show_total_period. Committer testing: Using 'perf annotate --stdio2' to use the TUI rendering but emitting the output to stdio: # perf config # # perf config annotate.hide_src_code=true # perf config annotate.hide_src_code=true # # perf config annotate.show_nr_jumps=true # perf config annotate.show_nr_samples=true # perf config annotate.hide_src_code=true annotate.show_nr_jumps=true annotate.show_nr_samples=true # # Before: # perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period] ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0 Percent 00000000000609f0 <ObjectInstance::weak_pointer_was_finalized()@@Base>: endbr64 cmpq $0x0,0x20(%rdi) ↓ je 10 xor %eax,%eax ← retq xchg %ax,%ax 100.00 10: push %rbp cmpq $0x0,0x18(%rdi) mov %rdi,%rbp ↓ jne 20 1b: xor %eax,%eax pop %rbp ← retq nop 20: lea 0x18(%rdi),%rdi → callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject* cmpq $0x0,0x18(%rbp) ↑ jne 1b mov %rbp,%rdi → callq ObjectBase::jsobj_addr() const@plt mov $0x1,%eax pop %rbp ← retq # After: # perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized 2> /dev/null Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period] ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0 Samples endbr64 cmpq $0x0,0x20(%rdi) ↓ je 10 xor %eax,%eax ← retq xchg %ax,%ax 1 1 10: push %rbp cmpq $0x0,0x18(%rdi) mov %rdi,%rbp ↓ jne 20 1 1b: xor %eax,%eax pop %rbp ← retq nop 1 20: lea 0x18(%rdi),%rdi → callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject* cmpq $0x0,0x18(%rbp) ↑ jne 1b mov %rbp,%rdi → callq ObjectBase::jsobj_addr() const@plt mov $0x1,%eax pop %rbp ← retq # # perf config annotate.show_nr_jumps annotate.show_nr_jumps=true # perf config annotate.show_nr_jumps=false # perf config annotate.show_nr_jumps annotate.show_nr_jumps=false # # perf annotate --stdio2 ObjectInstance::weak_pointer_was_finalized 2> /dev/null Samples: 1 of event 'cycles', 4000 Hz, Event count (approx.): 830873, [percent: local period] ObjectInstance::weak_pointer_was_finalized() /usr/lib64/libgjs.so.0.0.0 Samples endbr64 cmpq $0x0,0x20(%rdi) ↓ je 10 xor %eax,%eax ← retq xchg %ax,%ax 1 10: push %rbp cmpq $0x0,0x18(%rdi) mov %rdi,%rbp ↓ jne 20 1b: xor %eax,%eax pop %rbp ← retq nop 20: lea 0x18(%rdi),%rdi → callq JS_UpdateWeakPointerAfterGC(JS::Heap<JSObject* cmpq $0x0,0x18(%rbp) ↑ jne 1b mov %rbp,%rdi → callq ObjectBase::jsobj_addr() const@plt mov $0x1,%eax pop %rbp ← retq # Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-6-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf config: Introduce perf_config_u8()Ravi Bangoria
Introduce perf_config_u8() utility function to convert char * input into u8 destination. We will utilize it in followup patch. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-5-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf annotate: Fix --show-nr-samples for tui/stdio2Ravi Bangoria
perf annotate --show-nr-samples does not really show number of samples. The reason is we have two separate variables for the same purpose. One is in symbol_conf.show_nr_samples and another is annotation_options.show_nr_samples. We save command line option in symbol_conf.show_nr_samples but uses annotation_option.show_nr_samples while rendering tui/stdio2 browser. Though, we copy symbol_conf.show_nr_samples to annotation__default_options.show_nr_samples but that is not really effective as we don't use annotation__default_options once we copy default options to dynamic variable annotate.opts in cmd_annotate(). Instead of all these complication, keep only one variable and use it all over. symbol_conf.show_nr_samples is used by perf report/top as well. So let's kill annotation_options.show_nr_samples. On a side note, I've kept annotation_options.show_nr_samples definition because it's still used by perf-config code. Follow up patch to fix perf-config for annotate will remove annotation_options.show_nr_samples. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-4-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf annotate: Fix --show-total-period for tui/stdio2Ravi Bangoria
perf annotate --show-total-period does not really show total period. The reason is we have two separate variables for the same purpose. One is in symbol_conf.show_total_period and another is annotation_options.show_total_period. We save command line option in symbol_conf.show_total_period but uses annotation_option.show_total_period while rendering tui/stdio2 browser. Though, we copy symbol_conf.show_total_period to annotation__default_options.show_total_period but that is not really effective as we don't use annotation__default_options once we copy default options to dynamic variable annotate.opts in cmd_annotate(). Instead of all these complication, keep only one variable and use it all over. symbol_conf.show_total_period is used by perf report/top as well. So let's kill annotation_options.show_total_period. On a side note, I've kept annotation_options.show_total_period definition because it's still used by perf-config code. Follow up patch to fix perf-config for annotate will remove annotation_options.show_total_period. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-3-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27perf annotate/tui: Re-render title bar after switching back from script browserRavi Bangoria
The 'perf annotate' TUI browser provides a 'r' hot key to switch to a script browser. But the annotate browser title bar becomes hidden while switching back from script browser. Fix it. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Link: http://lore.kernel.org/lkml/20200213064306.160480-2-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27tools headers UAPI: Update tools's copy of kvm.h headersArnaldo Carvalho de Melo
Picking the changes from: 5ef8acbdd687 ("KVM: nVMX: Emulate MTF when performing instruction emulation") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h No change in tooling ensues, just the x86 kvm tooling gets rebuilt as those headers are included in its build: $ cp arch/x86/include/uapi/asm/kvm.h tools/arch/x86/include/uapi/asm/kvm.h $ make -C tools/perf make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build Auto-detecting system features: ... dwarf: [ on ] <SNIP> ... disassembler-four-args: [ on ] DESCEND plugins CC /tmp/build/perf/arch/x86/util/kvm-stat.o <SNIP> LD /tmp/build/perf/arch/x86/util/perf-in.o LD /tmp/build/perf/arch/x86/perf-in.o LD /tmp/build/perf/arch/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> $ As it doesn't seem to be used there: $ grep STATE tools/perf/arch/x86/util/kvm-stat.c $ And the 'perf trace' beautifier table generator isn't interested in these things: $ grep regex= tools/perf/trace/beauty/kvm_ioctl.sh regex='^#[[:space:]]*define[[:space:]]+KVM_(\w+)[[:space:]]+_IO[RW]*\([[:space:]]*KVMIO[[:space:]]*,[[:space:]]*(0x[[:xdigit:]]+).*' $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oliver Upton <oupton@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-27tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo
To pick up the changes from these csets: 21b5ee59ef18 ("x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF") $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ git diff diff --git a/tools/arch/x86/include/asm/msr-index.h b/tools/arch/x86/include/asm/msr-index.h index ebe1685e92dd..d5e517d1c3dd 100644 --- a/tools/arch/x86/include/asm/msr-index.h +++ b/tools/arch/x86/include/asm/msr-index.h @@ -512,6 +512,8 @@ #define MSR_K7_HWCR 0xc0010015 #define MSR_K7_HWCR_SMMLOCK_BIT 0 #define MSR_K7_HWCR_SMMLOCK BIT_ULL(MSR_K7_HWCR_SMMLOCK_BIT) +#define MSR_K7_HWCR_IRPERF_EN_BIT 30 +#define MSR_K7_HWCR_IRPERF_EN BIT_ULL(MSR_K7_HWCR_IRPERF_EN_BIT) #define MSR_K7_FID_VID_CTL 0xc0010041 #define MSR_K7_FID_VID_STATUS 0xc0010042 $ That don't result in any change in tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after $ To silence this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-26Merge tag 'trace-v5.6-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing and bootconfig updates: "Fixes and changes to bootconfig before it goes live in a release. Change in API of bootconfig (before it comes live in a release): - Have a magic value "BOOTCONFIG" in initrd to know a bootconfig exists - Set CONFIG_BOOT_CONFIG to 'n' by default - Show error if "bootconfig" on cmdline but not compiled in - Prevent redefining the same value - Have a way to append values - Added a SELECT BLK_DEV_INITRD to fix a build failure Synthetic event fixes: - Switch to raw_smp_processor_id() for recording CPU value in preempt section. (No care for what the value actually is) - Fix samples always recording u64 values - Fix endianess - Check number of values matches number of fields - Fix a printing bug Fix of trace_printk() breaking postponed start up tests Make a function static that is only used in a single file" * tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issue bootconfig: Add append value operator support bootconfig: Prohibit re-defining value on same key bootconfig: Print array as multiple commands for legacy command line bootconfig: Reject subkey and value on same parent key tools/bootconfig: Remove unneeded error message silencer bootconfig: Add bootconfig magic word for indicating bootconfig explicitly bootconfig: Set CONFIG_BOOT_CONFIG=n by default tracing: Clear trace_state when starting trace bootconfig: Mark boot_config_checksum() static tracing: Disable trace_printk() on post poned tests tracing: Have synthetic event test use raw_smp_processor_id() tracing: Fix number printing bug in print_synth_event() tracing: Check that number of vals matches number of synth event fields tracing: Make synth_event trace functions endian-correct tracing: Make sure synth_event_trace() example always uses u64
2020-02-26Merge tag 'linux-kselftest-kunit-5.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kunit fixes from Shuah Khan: "This Kselftest kunit update consists of fixes to documentation and the run-time tool from Brendan Higgins and Heidi Fahim" * tag 'linux-kselftest-kunit-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: run kunit_tool from any directory kunit: test: Improve error messages for kunit_tool when kunitconfig is invalid Documentation: kunit: fixed sphinx error in code block
2020-02-26Merge tag 'linux-kselftest-5.6-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: - fixes to TIMEOUT failures and out-of-tree compilation compilation errors from Michael Ellerman. - declutter git status fix from Christophe Leroy * tag 'linux-kselftest-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/rseq: Fix out-of-tree compilation selftests: Install settings files to fix TIMEOUT failures selftest/lkdtm: Don't pollute 'git status'