summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2021-09-02Merge tag 'locking-debug-2021-09-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull memory model updates from Ingo Molnar: "LKMM updates: - Update documentation and code example KCSAN updates: - Introduce CONFIG_KCSAN_STRICT (which RCU uses) - Optimize use of get_ctx() by kcsan_found_watchpoint() - Rework atomic.h into permissive.h - Add the ability to ignore writes that change only one bit of a given data-racy variable. - Improve comments" * tag 'locking-debug-2021-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tools/memory-model: Document data_race(READ_ONCE()) tools/memory-model: Heuristics using data_race() must handle all values tools/memory-model: Add example for heuristic lockless reads tools/memory-model: Make read_foo_diagnostic() more clearly diagnostic kcsan: Make strict mode imply interruptible watchers kcsan: permissive: Ignore data-racy 1-bit value changes kcsan: Print if strict or non-strict during init kcsan: Rework atomic.h into permissive.h kcsan: Reduce get_ctx() uses in kcsan_found_watchpoint() kcsan: Introduce CONFIG_KCSAN_STRICT kcsan: Remove CONFIG_KCSAN_DEBUG kcsan: Improve some Kconfig comments
2021-09-02Merge tag 'linux-kselftest-kunit-5.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: "This KUnit update for Linux 5.15-rc1 adds new features and tests: Tool: - support for '--kernel_args' to allow setting module params - support for '--raw_output' option to show just the kunit output during make Tests: - new KUnit tests for checksums and timestamps - Print test statistics on failure - Integrates UBSAN into the KUnit testing framework. It fails KUnit tests whenever it reports undefined behavior" * tag 'linux-kselftest-kunit-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: Print test statistics on failure kunit: tool: make --raw_output support only showing kunit output kunit: tool: add --kernel_args to allow setting module params kunit: ubsan integration fat: Add KUnit tests for checksums and timestamps
2021-09-01Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for 32-bit tasks on asymmetric AArch32 systems (on top of the scheduler changes merged via the tip tree). - More entry.S clean-ups and conversion to C. - MTE updates: allow a preferred tag checking mode to be set per CPU (the overhead of synchronous mode is smaller for some CPUs than others); optimisations for kernel entry/exit path; optionally disable MTE on the kernel command line. - Kselftest improvements for SVE and signal handling, PtrAuth. - Fix unlikely race where a TLBI could use stale ASID on an ASID roll-over (found by inspection). - Miscellaneous fixes: disable trapping of PMSNEVFR_EL1 to higher exception levels; drop unnecessary sigdelsetmask() call in the signal32 handling; remove BUG_ON when failing to allocate SVE state (just signal the process); SYM_CODE annotations. - Other trivial clean-ups: use macros instead of magic numbers, remove redundant returns, typos. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (56 commits) arm64: Do not trap PMSNEVFR_EL1 arm64: mm: fix comment typo of pud_offset_phys() arm64: signal32: Drop pointless call to sigdelsetmask() arm64/sve: Better handle failure to allocate SVE register storage arm64: Document the requirement for SCR_EL3.HCE arm64: head: avoid over-mapping in map_memory arm64/sve: Add a comment documenting the binutils needed for SVE asm arm64/sve: Add some comments for sve_save/load_state() kselftest/arm64: signal: Add a TODO list for signal handling tests kselftest/arm64: signal: Add test case for SVE register state in signals kselftest/arm64: signal: Verify that signals can't change the SVE vector length kselftest/arm64: signal: Check SVE signal frame shows expected vector length kselftest/arm64: signal: Support signal frames with SVE register data kselftest/arm64: signal: Add SVE to the set of features we can check for arm64: replace in_irq() with in_hardirq() kselftest/arm64: pac: Fix skipping of tests on systems without PAC Documentation: arm64: describe asymmetric 32-bit support arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0 arm64: Advertise CPUs capable of running 32-bit applications in sysfs ...
2021-09-01Merge branch 'exit-cleanups-for-v5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull exit cleanups from Eric Biederman: "In preparation of doing something about PTRACE_EVENT_EXIT I have started cleaning up various pieces of code related to do_exit. Most of that code I did not manage to get tested and reviewed before the merge window opened but a handful of very useful cleanups are ready to be merged. The first change is simply the removal of the bdflush system call. The code has now been disabled long enough that even the oldest userspace working userspace setups anyone can find to test are fine with the bdflush system call being removed. Changing m68k fsp040_die to use force_sigsegv(SIGSEGV) instead of calling do_exit directly is interesting only in that it is nearly the most difficult of the incorrect uses of do_exit to remove. The change to the seccomp code to simply send a signal instead of calling do_coredump directly is a very nice little cleanup made possible by realizing the existing signal sending helpers were missing a little bit of functionality that is easy to provide" * 'exit-cleanups-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: signal/seccomp: Dump core when there is only one live thread signal/seccomp: Refactor seccomp signal and coredump generation signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die exit/bdflush: Remove the deprecated bdflush system call
2021-09-01Merge tag 'driver-core-5.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core patches for 5.15-rc1. These do change a number of different things across different subsystems, and because of that, there were 2 stable tags created that might have already come into your tree from different pulls that did the following - changed the bus remove callback to return void - sysfs iomem_get_mapping rework Other than those two things, there's only a few small things in here: - kernfs performance improvements for huge numbers of sysfs users at once - tiny api cleanups - other minor changes All of these have been in linux-next for a while with no reported problems, other than the before-mentioned merge issue" * tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits) MAINTAINERS: Add dri-devel for component.[hc] driver core: platform: Remove platform_device_add_properties() ARM: tegra: paz00: Handle device properties with software node API bitmap: extend comment to bitmap_print_bitmask/list_to_buf drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI topology: use bin_attribute to break the size limitation of cpumap ABI lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list sysfs: Rename struct bin_attribute member to f_mapping sysfs: Invoke iomem_get_mapping() from the sysfs open callback debugfs: Return error during {full/open}_proxy_open() on rmmod zorro: Drop useless (and hardly used) .driver member in struct zorro_dev zorro: Simplify remove callback sh: superhyway: Simplify check in remove callback nubus: Simplify check in remove callback nubus: Make struct nubus_driver::remove return void kernfs: dont call d_splice_alias() under kernfs node lock kernfs: use i_lock to protect concurrent inode updates kernfs: switch kernfs to use an rwsem kernfs: use VFS negative dentry caching ...
2021-09-01Merge tag 'char-misc-5.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big set of char/misc driver changes for 5.15-rc1. Lots of different driver subsystems are being updated in here, notably: - mhi subsystem update - fpga subsystem update - coresight/hwtracing subsystem update - interconnect subsystem update - nvmem subsystem update - parport drivers update - phy subsystem update - soundwire subsystem update and there are some other char/misc drivers being updated as well: - binder driver additions - new misc drivers - lkdtm driver updates - mei driver updates - sram driver updates - other minor driver updates. Note, there are no habanalabs driver updates in this pull request, that will probably come later before -rc1 is out in a different request. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits) Revert "bus: mhi: Add inbound buffers allocation flag" misc/pvpanic: fix set driver data VMCI: fix NULL pointer dereference when unmapping queue pair char: mware: fix returnvar.cocci warnings parport: remove non-zero check on count soundwire: cadence: do not extend reset delay soundwire: intel: conditionally exit clock stop mode on system suspend soundwire: intel: skip suspend/resume/wake when link was not started soundwire: intel: fix potential race condition during power down phy: qcom-qmp: Add support for SM6115 UFS phy dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings phy: qmp: Provide unique clock names for DP clocks lkdtm: remove IDE_CORE_CP crashpoint lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ coresight: Replace deprecated CPU-hotplug functions. Documentation: coresight: Add documentation for CoreSight config coresight: syscfg: Add initial configfs support coresight: config: Add preloaded configurations coresight: etm4x: Add complex configuration handlers to etmv4 coresight: etm-perf: Update to activate selected configuration ...
2021-08-31Merge tag 'net-next-5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Enable memcg accounting for various networking objects. BPF: - Introduce bpf timers. - Add perf link and opaque bpf_cookie which the program can read out again, to be used in libbpf-based USDT library. - Add bpf_task_pt_regs() helper to access user space pt_regs in kprobes, to help user space stack unwinding. - Add support for UNIX sockets for BPF sockmap. - Extend BPF iterator support for UNIX domain sockets. - Allow BPF TCP congestion control progs and bpf iterators to call bpf_setsockopt(), e.g. to switch to another congestion control algorithm. Protocols: - Support IOAM Pre-allocated Trace with IPv6. - Support Management Component Transport Protocol. - bridge: multicast: add vlan support. - netfilter: add hooks for the SRv6 lightweight tunnel driver. - tcp: - enable mid-stream window clamping (by user space or BPF) - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD - more accurate DSACK processing for RACK-TLP - mptcp: - add full mesh path manager option - add partial support for MP_FAIL - improve use of backup subflows - optimize option processing - af_unix: add OOB notification support. - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the router. - mac80211: Target Wake Time support in AP mode. - can: j1939: extend UAPI to notify about RX status. Driver APIs: - Add page frag support in page pool API. - Many improvements to the DSA (distributed switch) APIs. - ethtool: extend IRQ coalesce uAPI with timer reset modes. - devlink: control which auxiliary devices are created. - Support CAN PHYs via the generic PHY subsystem. - Proper cross-chip support for tag_8021q. - Allow TX forwarding for the software bridge data path to be offloaded to capable devices. Drivers: - veth: more flexible channels number configuration. - openvswitch: introduce per-cpu upcall dispatch. - Add internet mix (IMIX) mode to pktgen. - Transparently handle XDP operations in the bonding driver. - Add LiteETH network driver. - Renesas (ravb): - support Gigabit Ethernet IP - NXP Ethernet switch (sja1105): - fast aging support - support for "H" switch topologies - traffic termination for ports under VLAN-aware bridge - Intel 1G Ethernet - support getcrosststamp() with PCIe PTM (Precision Time Measurement) for better time sync - support Credit-Based Shaper (CBS) offload, enabling HW traffic prioritization and bandwidth reservation - Broadcom Ethernet (bnxt) - support pulse-per-second output - support larger Rx rings - Mellanox Ethernet (mlx5) - support ethtool RSS contexts and MQPRIO channel mode - support LAG offload with bridging - support devlink rate limit API - support packet sampling on tunnels - Huawei Ethernet (hns3): - basic devlink support - add extended IRQ coalescing support - report extended link state - Netronome Ethernet (nfp): - add conntrack offload support - Broadcom WiFi (brcmfmac): - add WPA3 Personal with FT to supported cipher suites - support 43752 SDIO device - Intel WiFi (iwlwifi): - support scanning hidden 6GHz networks - support for a new hardware family (Bz) - Xen pv driver: - harden netfront against malicious backends - Qualcomm mobile - ipa: refactor power management and enable automatic suspend - mhi: move MBIM to WWAN subsystem interfaces Refactor: - Ambient BPF run context and cgroup storage cleanup. - Compat rework for ndo_ioctl. Old code removal: - prism54 remove the obsoleted driver, deprecated by the p54 driver. - wan: remove sbni/granch driver" * tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits) net: Add depends on OF_NET for LiteX's LiteETH ipv6: seg6: remove duplicated include net: hns3: remove unnecessary spaces net: hns3: add some required spaces net: hns3: clean up a type mismatch warning net: hns3: refine function hns3_set_default_feature() ipv6: remove duplicated 'net/lwtunnel.h' include net: w5100: check return value after calling platform_get_resource() net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource() net: mdio-ipq4019: Make use of devm_platform_ioremap_resource() fou: remove sparse errors ipv4: fix endianness issue in inet_rtm_getroute_build_skb() octeontx2-af: Set proper errorcode for IPv4 checksum errors octeontx2-af: Fix static code analyzer reported issues octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg octeontx2-af: Fix loop in free and unmap counter af_unix: fix potential NULL deref in unix_dgram_connect() dpaa2-eth: Replace strlcpy with strscpy octeontx2-af: Use NDC TX for transmit packet data ...
2021-08-31Merge tag 'fs.move_mount.move_mount_set_group.v5.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull move_mount updates from Christian Brauner: "This contains an extension to the move_mount() syscall making it possible to add a single private mount into an existing propagation tree. The use-case comes from the criu folks which have been struggling with restoring complex mount trees for a long time. Variations of this work have been discussed at Plumbers before, e.g. https://www.linuxplumbersconf.org/event/7/contributions/640/ The extension to move_mount() enables criu to restore any set of mount namespaces, mount trees and sharing group trees without introducing yet more complexity into mount propagation itself. The changes required to criu to make use of this and restore complex propagation trees are available at https://github.com/Snorch/criu/commits/mount-v2-poc A cleaned-up version of this will go up for merging into the main criu repo after this lands" * tag 'fs.move_mount.move_mount_set_group.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: tests: add move_mount(MOVE_MOUNT_SET_GROUP) selftest move_mount: allow to add a mount into an existing group
2021-08-31Merge remote-tracking branch 'tip/sched/arm64' into for-next/coreCatalin Marinas
* tip/sched/arm64: (785 commits) Documentation: arm64: describe asymmetric 32-bit support arm64: Remove logic to kill 32-bit tasks on 64-bit-only cores arm64: Hook up cmdline parameter to allow mismatched 32-bit EL0 arm64: Advertise CPUs capable of running 32-bit applications in sysfs arm64: Prevent offlining first CPU with 32-bit EL0 on mismatched system arm64: exec: Adjust affinity for compat tasks with mismatched 32-bit EL0 arm64: Implement task_cpu_possible_mask() sched: Introduce dl_task_check_affinity() to check proposed affinity sched: Allow task CPU affinity to be restricted on asymmetric systems sched: Split the guts of sched_setaffinity() into a helper function sched: Introduce task_struct::user_cpus_ptr to track requested affinity sched: Reject CPU affinity changes based on task_cpu_possible_mask() cpuset: Cleanup cpuset_cpus_allowed_fallback() use in select_fallback_rq() cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus() cpuset: Don't use the cpu_possible_mask as a last resort for cgroup v1 sched: Introduce task_cpu_possible_mask() to limit fallback rq selection sched: Cgroup SCHED_IDLE support sched/topology: Skip updating masks for non-online nodes Linux 5.14-rc6 lib: use PFN_PHYS() in devmem_is_allowed() ...
2021-08-30Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Daniel Borkmann says: ==================== bpf-next 2021-08-31 We've added 116 non-merge commits during the last 17 day(s) which contain a total of 126 files changed, 6813 insertions(+), 4027 deletions(-). The main changes are: 1) Add opaque bpf_cookie to perf link which the program can read out again, to be used in libbpf-based USDT library, from Andrii Nakryiko. 2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu. 3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang. 4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch to another congestion control algorithm during init, from Martin KaFai Lau. 5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima. 6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta. 7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT} progs, from Xu Liu and Stanislav Fomichev. 8) Support for __weak typed ksyms in libbpf, from Hao Luo. 9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky. 10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov. 11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann. 12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian, Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others. 13) Another big batch to revamp XDP samples in order to give them consistent look and feel, from Kumar Kartikeya Dwivedi. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits) MAINTAINERS: Remove self from powerpc BPF JIT selftests/bpf: Fix potential unreleased lock samples: bpf: Fix uninitialized variable in xdp_redirect_cpu selftests/bpf: Reduce more flakyness in sockmap_listen bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS bpf: selftests: Add dctcp fallback test bpf: selftests: Add connect_to_fd_opts to network_helpers bpf: selftests: Add sk_state to bpf_tcp_helpers.h bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt selftests: xsk: Preface options with opt selftests: xsk: Make enums lower case selftests: xsk: Generate packets from specification selftests: xsk: Generate packet directly in umem selftests: xsk: Simplify cleanup of ifobjects selftests: xsk: Decrease sending speed selftests: xsk: Validate tx stats on tx thread selftests: xsk: Simplify packet validation in xsk tests selftests: xsk: Rename worker_* functions that are not thread entry points selftests: xsk: Disassociate umem size with packets sent selftests: xsk: Remove end-of-test packet ... ==================== Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-30Merge branch 'core-rcu.2021.08.28a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: "RCU changes for this cycle were: - Documentation updates - Miscellaneous fixes - Offloaded-callbacks updates - Updates to the nolibc library - Tasks-RCU updates - In-kernel torture-test updates - Torture-test scripting, perhaps most notably the pinning of torture-test guest OSes so as to force differences in memory latency. For example, in a two-socket system, a four-CPU guest OS will have one pair of its CPUs pinned to threads in a single core on one socket and the other pair pinned to threads in a single core on the other socket. This approach proved able to force race conditions that earlier testing missed. Some of these race conditions are still being tracked down" * 'core-rcu.2021.08.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (61 commits) torture: Replace deprecated CPU-hotplug functions. rcu: Replace deprecated CPU-hotplug functions rcu: Print human-readable message for schedule() in RCU reader rcu: Explain why rcu_all_qs() is a stub in preemptible TREE RCU rcu: Use per_cpu_ptr to get the pointer of per_cpu variable rcu: Remove useless "ret" update in rcu_gp_fqs_loop() rcu: Mark accesses in tree_stall.h rcu: Make rcu_gp_init() and rcu_gp_fqs_loop noinline to conserve stack rcu: Mark lockless ->qsmask read in rcu_check_boost_fail() srcutiny: Mark read-side data races rcu: Start timing stall repetitions after warning complete rcu: Do not disable GP stall detection in rcu_cpu_stall_reset() rcu/tree: Handle VM stoppage in stall detection rculist: Unify documentation about missing list_empty_rcu() rcu: Mark accesses to ->rcu_read_lock_nesting rcu: Weaken ->dynticks accesses and updates rcu: Remove special bit at the bottom of the ->dynticks counter rcu: Fix stall-warning deadlock due to non-release of rcu_node ->lock rcu: Fix to include first blocked task in stall warning torture: Make kvm-test-1-run-qemu.sh check for reboot loops ...
2021-08-27ipv6: add IFLA_INET6_RA_MTU to expose mtu valueRocco Yue
The kernel provides a "/proc/sys/net/ipv6/conf/<iface>/mtu" file, which can temporarily record the mtu value of the last received RA message when the RA mtu value is lower than the interface mtu, but this proc has following limitations: (1) when the interface mtu (/sys/class/net/<iface>/mtu) is updeated, mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) will be updated to the value of interface mtu; (2) mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) only affect ipv6 connection, and not affect ipv4. Therefore, when the mtu option is carried in the RA message, there will be a problem that the user sometimes cannot obtain RA mtu value correctly by reading mtu6. After this patch set, if a RA message carries the mtu option, you can send a netlink msg which nlmsg_type is RTM_GETLINK, and then by parsing the attribute of IFLA_INET6_RA_MTU to get the mtu value carried in the RA message received on the inet6 device. In addition, you can also get a link notification when ra_mtu is updated so it doesn't have to poll. In this way, if the MTU values that the device receives from the network in the PCO IPv4 and the RA IPv6 procedures are different, the user can obtain the correct ipv6 ra_mtu value and compare the value of ra_mtu and ipv4 mtu, then the device can use the lower MTU value for both IPv4 and IPv6. Signed-off-by: Rocco Yue <rocco.yue@mediatek.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210827150412.9267-1-rocco.yue@mediatek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-27selftests/bpf: Fix potential unreleased lockChengfeng Ye
This lock is not released if the program return at the patched branch. Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210827074140.118671-1-cyeaa@connect.ust.hk
2021-08-26selftests/bpf: Reduce more flakyness in sockmap_listenYucong Sun
This patch adds similar retry logic to more places where read() is used, to reduce flakyness in slow CI environment. Signed-off-by: Yucong Sun <fallentree@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825184745.2680830-1-fallentree@fb.com
2021-08-26selftests/net: allow GRO coalesce test on vethPaolo Abeni
This change extends the existing GRO coalesce test to allow running on top of a veth pair, so that no H/W dep is required to run them. By default gro.sh will use the veth backend, and will try to use exiting H/W in loopback mode if a specific device name is provided with the '-i' command line option. No functional change is intended for the loopback-based tests, just move all the relevant initialization/cleanup code into the related script. Introduces a new initialization helper script for the veth backend, and plugs the correct helper script according to the provided command line. Additionally, enable veth-based tests by default. v1 -> v2: - drop unused code in setup_veth_ns() - Willem Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25bpf: selftests: Add dctcp fallback testMartin KaFai Lau
This patch makes the bpf_dctcp test to fallback to cubic by using setsockopt(TCP_CONGESTION) when the tcp flow is not ecn ready. It also checks setsockopt() is not available to release(). The settimeo() from the network_helpers.h is used, so the local one is removed. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210824173026.3979130-1-kafai@fb.com
2021-08-25bpf: selftests: Add connect_to_fd_opts to network_helpersMartin KaFai Lau
The next test requires to setsockopt(TCP_CONGESTION) before connect(), so a new arg is needed for the connect_to_fd() to specify the cc's name. This patch adds a new "struct network_helper_opts" for the future option needs. It starts with the "cc" and "timeout_ms" option. A new helper connect_to_fd_opts() is added to take the new "const struct network_helper_opts *opts" as an arg. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210824173019.3977910-1-kafai@fb.com
2021-08-25bpf: selftests: Add sk_state to bpf_tcp_helpers.hMartin KaFai Lau
Add sk_state define to bpf_tcp_helpers.h. Rename the existing global variable "sk_state" in the kfunc_call test to "sk_state_res". Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210824173013.3977316-1-kafai@fb.com
2021-08-25selftests: xsk: Preface options with optMagnus Karlsson
Preface all options with opt_ and make them booleans. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-17-magnus.karlsson@gmail.com
2021-08-25selftests: xsk: Make enums lower caseMagnus Karlsson
Make enums lower case as that is the standard. Also drop the unnecessary TEST_MODE_UNCONFIGURED mode. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-16-magnus.karlsson@gmail.com
2021-08-25selftests: xsk: Generate packets from specificationMagnus Karlsson
Generate packets from a specification instead of something hard coded. The idea is that a test generates one or more packet specifications and provides it/them to both Tx and Rx. The Tx thread will generate from this specification and Rx will validate that it receives what is in the specification. The specification can be the same on both ends, meaning that everything that was sent should be received, or different which means that Rx will only receive part of the sent packets. Currently, the packet specification is the same for both Rx and Tx and the same for each test. This will change in later work as features and tests are added. The data path functions are also renamed to better reflect what actions they are performing after introducing this feature. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-15-magnus.karlsson@gmail.com
2021-08-25selftests: xsk: Generate packet directly in umemMagnus Karlsson
Generate the packet directly in the umem instead of in a temporary buffer that is copied out. Simplifies the code and improves performance. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-14-magnus.karlsson@gmail.com
2021-08-25selftests: xsk: Simplify cleanup of ifobjectsMagnus Karlsson
Simpify the cleanup of ifobjects right before the program exits by introducing functions for creating and destroying these objects. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-13-magnus.karlsson@gmail.com
2021-08-25selftests: xsk: Decrease sending speedMagnus Karlsson
Decrease sending speed to avoid potentially overflowing some buffers in the skb case that leads to dropped packets we cannot control (and thus the tests may generate false negatives). Decrease batch size and introduce a usleep in the transmit thread to not overflow the receiver. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-12-magnus.karlsson@gmail.com
2021-08-25selftests: xsk: Validate tx stats on tx threadMagnus Karlsson
Validate the tx stats on the Tx thread instead of the Rx thread. Depending on your settings, you might not be allowed to query the statistics of a socket you do not own, so better to do this on the correct thread to start with. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-11-magnus.karlsson@gmail.com
2021-08-25selftests: xsk: Simplify packet validation in xsk testsMagnus Karlsson
Simplify packet validation in the xsk selftests by performing it at once for every packet. The current code performed this per batch and did this on copied packet data. Make it simpler and faster by validating it at once and on the umem packet data thus skipping the copy and the memory allocation for the temprary buffer. The optional packet dump feature is also simplified in the same manner. Memory allocation and copying is removed and the dump is performed directly on the umem data. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-10-magnus.karlsson@gmail.com
2021-08-25selftests: xsk: Rename worker_* functions that are not thread entry pointsMagnus Karlsson
Rename worker_* functions that are not thread entry points to something else. This was confusing. Now only thread entry points are worker_something. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-9-magnus.karlsson@gmail.com
2021-08-25selftests: xsk: Disassociate umem size with packets sentMagnus Karlsson
Disassociate the number of packets sent with the number of buffers in the umem. This so we can loop over the umem to test more things. Set the size of the umem to be a multiple of 2M. A requirement for huge pages that are needed in unaligned mode. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-8-magnus.karlsson@gmail.com
2021-08-25selftests: xsk: Remove end-of-test packetMagnus Karlsson
Get rid of the end-of-test packet and just count the number of packets received and quit when the expected number as been received. Simplifies the code. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-7-magnus.karlsson@gmail.com
2021-08-25selftests: xsk: Simplify the retry codeMagnus Karlsson
Simplify the retry code and make it more efficient by waiting first, instead of trying immediately which always fails due to the asynchronous nature of xsk socket close. Also decrease the wait time to significantly lower the run-time of the test suite. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-6-magnus.karlsson@gmail.com
2021-08-25selftests: xsk: Return correct error codesMagnus Karlsson
Return the correct error codes so they can be printed correctly. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-5-magnus.karlsson@gmail.com
2021-08-25selftests: xsk: Remove unused variablesMagnus Karlsson
Remove unused variables and typedefs. The *_npkts variables are incremented but never used. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-4-magnus.karlsson@gmail.com
2021-08-25selftests: xsk: Remove the num_tx_packets optionMagnus Karlsson
Remove the number of tx packet option as this should be decided by the test itself. Also change the number of packets to be sent to 4096 speeding up the execution. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-3-magnus.karlsson@gmail.com
2021-08-25selftests: xsk: Remove color modeMagnus Karlsson
Remove color mode since it does not add any value and having less code means less maintenance which is a good thing. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210825093722.10219-2-magnus.karlsson@gmail.com
2021-08-25bpf: selftests: Add bpf_task_pt_regs() selftestDaniel Xu
This test retrieves the uprobe's pt_regs in two different ways and compares the contents in an arch-agnostic way. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/5581eb8800f6625ec8813fe21e9dce1fbdef4937.1629772842.git.dxu@dxuuu.xyz
2021-08-25bpf: Add bpf_task_pt_regs() helperDaniel Xu
The motivation behind this helper is to access userspace pt_regs in a kprobe handler. uprobe's ctx is the userspace pt_regs. kprobe's ctx is the kernelspace pt_regs. bpf_task_pt_regs() allows accessing userspace pt_regs in a kprobe handler. The final case (kernelspace pt_regs in uprobe) is pretty rare (usermode helper) so I think that can be solved later if necessary. More concretely, this helper is useful in doing BPF-based DWARF stack unwinding. Currently the kernel can only do framepointer based stack unwinds for userspace code. This is because the DWARF state machines are too fragile to be computed in kernelspace [0]. The idea behind DWARF-based stack unwinds w/ BPF is to copy a chunk of the userspace stack (while in prog context) and send it up to userspace for unwinding (probably with libunwind) [1]. This would effectively enable profiling applications with -fomit-frame-pointer using kprobes and uprobes. [0]: https://lkml.org/lkml/2012/2/10/356 [1]: https://github.com/danobi/bpf-dwarf-walk Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/e2718ced2d51ef4268590ab8562962438ab82815.1629772842.git.dxu@dxuuu.xyz
2021-08-25selftests: mptcp: add MP_FAIL mibs checkGeliang Tang
This patch added a function chk_fail_nr to check the mibs for MP_FAIL. Signed-off-by: Geliang Tang <geliangtang@xiaomi.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24selftests/net: Use kselftest skip code for skipped testsPo-Hsu Lin
There are several test cases in the net directory are still using exit 0 or exit 1 when they need to be skipped. Use kselftest framework skip code instead so it can help us to distinguish the return status. Criterion to filter out what should be fixed in net directory: grep -r "exit [01]" -B1 | grep -i skip This change might cause some false-positives if people are running these test scripts directly and only checking their return codes, which will change from 0 to 4. However I think the impact should be small as most of our scripts here are already using this skip code. And there will be no such issue if running them with the kselftest framework. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20210823085854.40216-1-po-hsu.lin@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24tools: include: Add ethtool_drvinfo definition to UAPI headerKumar Kartikeya Dwivedi
Instead of copying the whole header in, just add the struct definitions we need for now. In the future it can be synced as a copy of in-tree header if required. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210821002010.845777-3-memxor@gmail.com
2021-08-24selftests/bpf: Test for get_netns_cookieXu Liu
Add test to use get_netns_cookie() from BPF_PROG_TYPE_SK_MSG. Signed-off-by: Xu Liu <liuxu623@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210820071712.52852-3-liuxu623@gmail.com
2021-08-24selftests/bpf: Exit with KSFT_SKIP if no Makefile foundLi Zhijian
This would happend when we run the tests after install kselftests root@lkp-skl-d01 ~# /kselftests/run_kselftest.sh -t bpf:test_doc_build.sh TAP version 13 1..1 # selftests: bpf: test_doc_build.sh perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_ADDRESS = "en_US.UTF-8", LC_NAME = "en_US.UTF-8", LC_MONETARY = "en_US.UTF-8", LC_PAPER = "en_US.UTF-8", LC_IDENTIFICATION = "en_US.UTF-8", LC_TELEPHONE = "en_US.UTF-8", LC_MEASUREMENT = "en_US.UTF-8", LC_TIME = "en_US.UTF-8", LC_NUMERIC = "en_US.UTF-8", LANG = "en_US.UTF-8" are supported and installed on your system. perl: warning: Falling back to the standard locale ("C"). # skip: bpftool files not found! # ok 1 selftests: bpf: test_doc_build.sh # SKIP Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210820025549.28325-1-lizhijian@cn.fujitsu.com
2021-08-24selftests/bpf: Add missing files required by test_bpftool.sh for installingLi Zhijian
test_bpftool.sh relies on bpftool and test_bpftool.py. 'make install' will install bpftool to INSTALL_PATH/bpf/bpftool, and export it to PATH so that it can be used after installing. Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210820015556.23276-5-lizhijian@cn.fujitsu.com
2021-08-24selftests/bpf: Add default bpftool built by selftests to PATHLi Zhijian
For 'make run_tests': selftests will build bpftool into tools/testing/selftests/bpf/tools/sbin/bpftool by default. ================== root@lkp-skl-d01 /opt/rootfs/v5.14-rc4# make -C tools/testing/selftests/bpf run_tests make: Entering directory '/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf' MKDIR include MKDIR libbpf MKDIR bpftool [...] GEN /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/profiler.skel.h CC /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/prog.o GEN /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/pid_iter.skel.h CC /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/pids.o LINK /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/bpftool INSTALL bpftool GEN vmlinux.h [...] # test_feature_dev_json (test_bpftool.TestBpftool) ... ERROR # test_feature_kernel (test_bpftool.TestBpftool) ... ERROR # test_feature_kernel_full (test_bpftool.TestBpftool) ... ERROR # test_feature_kernel_full_vs_not_full (test_bpftool.TestBpftool) ... ERROR # test_feature_macros (test_bpftool.TestBpftool) ... Error: bug: failed to retrieve CAP_BPF status: Invalid argument # ERROR # # ====================================================================== # ERROR: test_feature_dev_json (test_bpftool.TestBpftool) # ---------------------------------------------------------------------- # Traceback (most recent call last): # File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 57, in wrapper # return f(*args, iface, **kwargs) # File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 82, in test_feature_dev_json # res = bpftool_json(["feature", "probe", "dev", iface]) # File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 42, in bpftool_json # res = _bpftool(args) # File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 34, in _bpftool # return subprocess.check_output(_args) # File "/usr/lib/python3.7/subprocess.py", line 395, in check_output # **kwargs).stdout # File "/usr/lib/python3.7/subprocess.py", line 487, in run # output=stdout, stderr=stderr) # subprocess.CalledProcessError: Command '['bpftool', '-j', 'feature', 'probe', 'dev', 'dummy0']' returned non-zero exit status 255. # ================== Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210820015556.23276-4-lizhijian@cn.fujitsu.com
2021-08-24selftests/bpf: Make test_doc_build.sh work from script directoryLi Zhijian
Previously, it fails as below: ------------- root@lkp-skl-d01 /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf# ./test_doc_build.sh ++ realpath --relative-to=/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf ./test_doc_build.sh + SCRIPT_REL_PATH=test_doc_build.sh ++ dirname test_doc_build.sh + SCRIPT_REL_DIR=. ++ realpath /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/./../../../../ + KDIR_ROOT_DIR=/opt/rootfs/v5.14-rc4 + cd /opt/rootfs/v5.14-rc4 + for tgt in docs docs-clean + make -s -C /opt/rootfs/v5.14-rc4/. docs make: *** No rule to make target 'docs'. Stop. + for tgt in docs docs-clean + make -s -C /opt/rootfs/v5.14-rc4/. docs-clean make: *** No rule to make target 'docs-clean'. Stop. ----------- Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210820015556.23276-3-lizhijian@cn.fujitsu.com
2021-08-24selftests/bpf: Enlarge select() timeout for test_mapsLi Zhijian
0Day robot observed that it's easily timeout on a heavy load host. ------------------- # selftests: bpf: test_maps # Fork 1024 tasks to 'test_update_delete' # Fork 1024 tasks to 'test_update_delete' # Fork 100 tasks to 'test_hashmap' # Fork 100 tasks to 'test_hashmap_percpu' # Fork 100 tasks to 'test_hashmap_sizes' # Fork 100 tasks to 'test_hashmap_walk' # Fork 100 tasks to 'test_arraymap' # Fork 100 tasks to 'test_arraymap_percpu' # Failed sockmap unexpected timeout not ok 3 selftests: bpf: test_maps # exit=1 # selftests: bpf: test_lru_map # nr_cpus:8 ------------------- Since this test will be scheduled by 0Day to a random host that could have only a few cpus(2-8), enlarge the timeout to avoid a false NG report. In practice, i tried to pin it to only one cpu by 'taskset 0x01 ./test_maps', and knew 10S is likely enough, but i still perfer to a larger value 30. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20210820015556.23276-2-lizhijian@cn.fujitsu.com
2021-08-24Merge 5.14-rc7 into char-misc-nextGreg Kroah-Hartman
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-24selftests: mptcp: add_addr and echo race testYonglong Li
This patch added an extra test for the singal_address_tests() to do the ADD_ADDR and ADD_ADDR_ECHO race test. Co-developed-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-23selftests/bpf: Reduce flakyness in timer_mimYucong Sun
This patch extends wait time in timer_mim. As observed in slow CI environment, it is possible to have interrupt/preemption long enough to cause the test to fail, almost 1 failure in 5 runs. Signed-off-by: Yucong Sun <fallentree@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210823213629.3519641-1-fallentree@fb.com
2021-08-23bpf: Migrate cgroup_bpf to internal cgroup_bpf_attach_type enumDave Marchevsky
Add an enum (cgroup_bpf_attach_type) containing only valid cgroup_bpf attach types and a function to map bpf_attach_type values to the new enum. Inspired by netns_bpf_attach_type. Then, migrate cgroup_bpf to use cgroup_bpf_attach_type wherever possible. Functionality is unchanged as attach_type_to_prog_type switches in bpf/syscall.c were preventing non-cgroup programs from making use of the invalid cgroup_bpf array slots. As a result struct cgroup_bpf uses 504 fewer bytes relative to when its arrays were sized using MAX_BPF_ATTACH_TYPE. bpf_cgroup_storage is notably not migrated as struct bpf_cgroup_storage_key is part of uapi and contains a bpf_attach_type member which is not meant to be opaque. Similarly, bpf_cgroup_link continues to report its bpf_attach_type member to userspace via fdinfo and bpf_link_info. To ease disambiguation, bpf_attach_type variables are renamed from 'type' to 'atype' when changed to cgroup_bpf_attach_type. Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20210819092420.1984861-2-davemarchevsky@fb.com
2021-08-23kselftest/arm64: signal: Add a TODO list for signal handling testsMark Brown
Note down a few gaps in our coverage. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210819134245.13935-7-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
generated by cgit (git 2.34.1) at 2024-06-08 11:05:45 +0000