| Age | Commit message (Collapse) | Author |
|---|
|
Test that packets received via a locked bridge port whose {SMAC, VID}
does not appear in the bridge's FDB or appears with a different port,
trigger the "locked_port" packet trap.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test that packets with a destination MAC of 01:80:C2:00:00:03 trigger
the "eapol" packet trap.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merely checking whether a trap counter incremented or not without
logging a test result is useful on its own. Split this functionality to
a helper which will be used by subsequent patches.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
test_progs fails to be compiled in the 32-bit arch, log is as follows:
test_progs.c:1013:52: error: format '%ld' expects argument of type 'long int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
1013 | sprintf(buf, "MSG_TEST_LOG (cnt: %ld, last: %d)",
| ~~^
| |
| long int
| %d
1014 | strlen(msg->test_log.log_buf),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| size_t {aka unsigned int}
Fix it.
Fixes: 91b2c0afd00c ("selftests/bpf: Add parallelism to test_progs")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221108015857.132457-1-yangjihong1@huawei.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
32-bit platforms
When cross-compiling test_verifier for 32-bit platforms, the casting error is shown below:
test_verifier.c:1263:27: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
1263 | info.xlated_prog_insns = (__u64)*buf;
| ^
cc1: all warnings being treated as errors
Fix it by adding zero-extension for it.
Fixes: 933ff53191eb ("selftests/bpf: specify expected instructions in test_verifier tests")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221108121945.4104644-1-pulehui@huaweicloud.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add coverage for FEAT_SVE2p1.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221017152520.1039165-7-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Since the newly added instruction is in the HINT space we can't reasonably
test for it actually being present.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221017152520.1039165-5-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add FEAT_CSSC to the set of features checked by the hwcap selftest.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20221017152520.1039165-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
A PCI allocation fix and a PV clock fix.
|
|
Update EXIT_REASONS from source, including VMX_EXIT_REASONS,
SVM_EXIT_REASONS, AARCH64_EXIT_REASONS, USERSPACE_EXIT_REASONS.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_00082C8BFA925A65E11570F417F1CD404505@qq.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The first field in /proc/mounts can be influenced by unprivileged users
through the widespread `fusermount` setuid-root program. Example:
```
user$ mkdir ~/mydebugfs
user$ export _FUSE_COMMFD=0
user$ fusermount ~/mydebugfs -ononempty,fsname=debugfs
user$ grep debugfs /proc/mounts
debugfs /home/user/mydebugfs fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0
```
If there is no debugfs already mounted in the system then this can be
used by unprivileged users to trick kvm_stat into using a user
controlled file system location for obtaining KVM statistics.
Even though the root user is not allowed to access non-root FUSE mounts
for security reasons, the unprivileged user can unmount the FUSE mount
before kvm_stat uses the mounted path. If it wins the race, kvm_stat
will read from the location where the FUSE mount resided.
Note that the files in debugfs are only opened for reading, so the
attacker can cause very large data to be read in by kvm_stat, or fake
data to be processed, but there should be no viable way to turn this
into a privilege escalation.
The fix is simply to use the file system type field instead. Whitespace
in the mount path is escaped in /proc/mounts thus no further safety
measures in the parsing should be necessary to make this correct.
Message-Id: <20221103135927.13656-1-matthias.gerstner@suse.de>
Signed-off-by: Matthias Gerstner <matthias.gerstner@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Address a few problems with the initial test script version:
* On systems with ip6tables but no ip6tables-legacy, testing for
ip6tables was disabled by accident.
* Firewall setup phase did not respect possibly unavailable tools.
* Consistently call nft via '$nft'.
Fixes: 6e31ce831c63b ("selftests: netfilter: Test reverse path filtering")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Let's trigger a R/O longterm pin on three cases of R/O mapped anonymous
pages:
* exclusive (never shared)
* shared (child still alive)
* previously shared (child no longer alive)
... and make sure that the pin is reliable: whatever we write via the page
tables has to be observable via the pin.
Link: https://lkml.kernel.org/r/20220927110120.106906-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph von Recklinghausen <crecklin@redhat.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
io_uring provides a simple mechanism to test long-term, R/W GUP pins
-- via fixed buffers -- and can be used to verify that GUP pins stay
in sync with the pages in the page table even if a page would
temporarily get mapped R/O or concurrent fork() could accidentially
end up sharing pinned pages with the child.
Note that this essentially re-introduces local_config support that was
removed recently in commit 6f83d6c74ea5 ("Kselftests: remove support of
libhugetlbfs from kselftests").
[david@redhat.com: s/size_t/ssize_t/ on `cur', `total'.]
Link: https://lkml.kernel.org/r/445fe1ae-9e22-0d1d-4d09-272231d2f84a@redhat.com
Link: https://lkml.kernel.org/r/20220927110120.106906-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph von Recklinghausen <crecklin@redhat.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's run all existing test cases with all hugetlb sizes we're able to
detect.
Note that some tests cases still fail. This will, for example, be fixed
once vmsplice properly uses FOLL_PIN instead of FOLL_GET for pinning.
With 2 MiB and 1 GiB hugetlb on x86_64, the expected failures are:
# [RUN] vmsplice() + unmap in child ... with hugetlb (2048 kB)
not ok 23 No leak from parent into child
# [RUN] vmsplice() + unmap in child ... with hugetlb (1048576 kB)
not ok 24 No leak from parent into child
# [RUN] vmsplice() before fork(), unmap in parent after fork() ... with hugetlb (2048 kB)
not ok 35 No leak from child into parent
# [RUN] vmsplice() before fork(), unmap in parent after fork() ... with hugetlb (1048576 kB)
not ok 36 No leak from child into parent
# [RUN] vmsplice() + unmap in parent after fork() ... with hugetlb (2048 kB)
not ok 47 No leak from child into parent
# [RUN] vmsplice() + unmap in parent after fork() ... with hugetlb (1048576 kB)
not ok 48 No leak from child into parent
Link: https://lkml.kernel.org/r/20220927110120.106906-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph von Recklinghausen <crecklin@redhat.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's add various THP variants that we'll run with our existing test
cases.
Link: https://lkml.kernel.org/r/20220927110120.106906-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph von Recklinghausen <crecklin@redhat.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We'll reuse it in the anon_cow test next.
Link: https://lkml.kernel.org/r/20220927110120.106906-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph von Recklinghausen <crecklin@redhat.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/vm: test COW handling of anonymous memory".
This is my current set of tests for testing COW handling of anonymous
memory, especially when interacting with GUP. I developed these tests
while working on PageAnonExclusive and managed to clean them up just now.
On current upstream Linux, all tests pass except the hugetlb tests that
rely on vmsplice -- these tests should pass as soon as vmsplice properly
uses FOLL_PIN instead of FOLL_GET.
I'm working on additional tests for COW handling in private mappings,
focusing on long-term R/O pinning e.g., of the shared zeropage, pagecache
pages and KSM pages. These tests, however, will go into a different file.
So this is everything I have regarding tests for anonymous memory.
This patch (of 7):
Let's start adding tests for our COW handling of anonymous memory. We'll
focus on basic tests that we can achieve without additional libraries or
gup_test extensions.
We'll add THP and hugetlb tests separately.
[david@redhat.com: s/size_t/ssize_t/ on `cur', `total', `transferred';]
Link: https://lkml.kernel.org/r/51302b9e-dc69-d709-3214-f23868028555@redhat.com
Link: https://lkml.kernel.org/r/20220927110120.106906-1-david@redhat.com
Link: https://lkml.kernel.org/r/20220927110120.106906-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph von Recklinghausen <crecklin@redhat.com>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After converting all the three relevant testcases (uffd, madvise, mremap)
to use memfd, no test will need the hugetlb mount point anymore. Drop the
code.
Link: https://lkml.kernel.org/r/20221014144015.94039-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For dropping the hugetlb mountpoint in run_vmtests.sh. Cleaned it up a
little bit around the changed codes.
Link: https://lkml.kernel.org/r/20221014144013.94027-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For dropping the hugetlb mountpoint in run_vmtests.sh. Since no parameter
is needed, drop USAGE too.
Link: https://lkml.kernel.org/r/20221014143921.93887-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/vm: Drop hugetlb mntpoint in run_vmtests.sh", v2.
Clean the code up so we can use the same memfd for both hugetlb and shmem
which is cleaner.
This patch (of 4):
We already used memfd for shmem test, move it forward with hugetlb too so
that we don't need user to specify the hugetlb file path explicitly when
running hugetlb shared tests.
Link: https://lkml.kernel.org/r/20221014143921.93887-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20221014143921.93887-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Along the development cycle, the testing code support for module/in-kernel
compiles was removed. Restore this functionality by moving any internal
API tests to the userspace side, as well as threading tests. Fix the
lockdep issues and add a way to reduce memory usage so the tests can
complete with KASAN + memleak detection. Make the tests work on 32 bit
hosts where possible and detect 32 bit hosts in the radix test suite.
[akpm@linux-foundation.org: fix module export]
[akpm@linux-foundation.org: fix it some more]
[liam.howlett@oracle.com: fix compile warnings on 32bit build in check_find()]
Link: https://lkml.kernel.org/r/20221107203816.1260327-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20221028180415.3074673-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 3af1dfdd51e06697 ("perf build: Move perf_dlfilters.h in the
source tree") moved perf_dlfilters.h to the include/perf/ directory
while include/perf is ignored because it has 'perf' in the name. Newly
created files in the include/perf/ directory will be ignored.
Testing:
Before:
$ touch tools/perf/include/perf/junk
$ git status | grep junk
$ git check-ignore -v tools/perf/include/perf/junk
tools/perf/.gitignore:6:perf tools/perf/include/perf/junk
After:
$ git status | grep junk
tools/perf/include/perf/junk
$ git check-ignore -v tools/perf/include/perf/junk
Add !include/perf/ to perf's .gitignore file.
Fixes: 3af1dfdd51e06697 ("perf build: Move perf_dlfilters.h in the source tree")
Signed-off-by: Donglin Peng <dolinux.peng@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221103092704.173391-1-dolinux.peng@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commit f4a2aade6809c657 ("perf tests powerpc: Fix branch stack sampling
test to include sanity check for branch filter") added a skip if certain
branch options aren't available.
But the change added both -b (--branch-any) and --branch-filter options
at the same time, which will always result in a failure on any platform
because the arguments can't be used together.
Fix this by removing -b (--branch-any) and leaving --branch-filter which
already specifies 'any'. Also add warning messages to the test and perf
tool.
Output on x86 before this fix:
$ sudo ./perf test branch
108: Check branch stack sampling : Skip
After:
$ sudo ./perf test branch
108: Check branch stack sampling : Ok
Fixes: f4a2aade6809c657 ("perf tests powerpc: Fix branch stack sampling test to include sanity check for branch filter")
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman.Khandual@arm.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221028121913.745307-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf stat' with CSV output option prints an extra empty string as first
field in metrics output line. Sample output below:
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,1.78,msec,cpu-clock,1785146,100.00,0.973,CPUs utilized
S0,1,26,,context-switches,1781750,100.00,0.015,M/sec
S0,1,1,,cpu-migrations,1780526,100.00,0.561,K/sec
S0,1,1,,page-faults,1779060,100.00,0.561,K/sec
S0,1,875807,,cycles,1769826,100.00,0.491,GHz
S0,1,85281,,stalled-cycles-frontend,1767512,100.00,9.74,frontend cycles idle
S0,1,576839,,stalled-cycles-backend,1766260,100.00,65.86,backend cycles idle
S0,1,288430,,instructions,1762246,100.00,0.33,insn per cycle
====> ,S0,1,,,,,,,2.00,stalled cycles per insn
The above command line uses field separator as "," via "-x," option and
per-socket option displays socket value as first field. But here the
last line for "stalled cycles per insn" has "," in the beginning.
Sample output using interval mode:
# ./perf stat -I 1000 -x, --per-socket -a -C 1 ls
0.001813453,S0,1,1.87,msec,cpu-clock,1872052,100.00,0.002,CPUs utilized
0.001813453,S0,1,2,,context-switches,1868028,100.00,1.070,K/sec
------
0.001813453,S0,1,85379,,instructions,1856754,100.00,0.32,insn per cycle
====> 0.001813453,,S0,1,,,,,,,1.34,stalled cycles per insn
Above result also has an extra CSV separator after
the timestamp. Patch addresses extra field separator
in the beginning of the metric output line.
The counter stats are displayed by function
"perf_stat__print_shadow_stats" in code
"util/stat-shadow.c". While printing the stats info
for "stalled cycles per insn", function "new_line_csv"
is used as new_line callback.
The new_line_csv function has check for "os->prefix"
and if prefix is not null, it will be printed along
with cvs separator.
Snippet from "new_line_csv":
if (os->prefix)
fprintf(os->fh, "%s%s", os->prefix, config->csv_sep);
Here os->prefix gets printed followed by ","
which is the cvs separator. The os->prefix is
used in interval mode option ( -I ), to print
time stamp on every new line. But prefix is
already set to contain CSV separator when used
in interval mode for CSV option.
Reference: Function "static void print_interval"
Snippet:
sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
Also if prefix is not assigned (if not used with
-I option), it gets set to empty string.
Reference: function printout() in util/stat-display.c
Snippet:
.prefix = prefix ? prefix : "",
Since prefix already set to contain cvs_sep in interval
option, patch removes printing config->csv_sep in
new_line_csv function to avoid printing extra field.
After the patch:
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,2.04,msec,cpu-clock,2045202,100.00,1.013,CPUs utilized
S0,1,2,,context-switches,2041444,100.00,979.289,/sec
S0,1,0,,cpu-migrations,2040820,100.00,0.000,/sec
S0,1,2,,page-faults,2040288,100.00,979.289,/sec
S0,1,254589,,cycles,2036066,100.00,0.125,GHz
S0,1,82481,,stalled-cycles-frontend,2032420,100.00,32.40,frontend cycles idle
S0,1,113170,,stalled-cycles-backend,2031722,100.00,44.45,backend cycles idle
S0,1,88766,,instructions,2030942,100.00,0.35,insn per cycle
S0,1,,,,,,,1.27,stalled cycles per insn
Fixes: 92a61f6412d3a09d ("perf stat: Implement CSV metrics output")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Reviewed-By: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221018085605.63834-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The following command will get segfault due to missing aggr_header_csv
for AGGR_NODE:
$ sudo perf stat -a --per-node -x, --metric-only true
Committer testing:
Before this patch:
# perf stat -a --per-node -x, --metric-only true
Segmentation fault (core dumped)
#
After:
# gdb perf
-bash: gdb: command not found
# perf stat -a --per-node -x, --metric-only true
node,Ghz,frontend cycles idle,backend cycles idle,insn per cycle,branch-misses of all branches,
N0,32,0.335,2.10,0.65,0.69,0.03,1.92,
#
Fixes: 86895b480a2f10c7 ("perf stat: Add --per-node agregation support")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: http://lore.kernel.org/lkml/20221107213314.3239159-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use ARRAY_SIZE to fix the following coccicheck warnings:
tools/testing/selftests/arm64/mte/check_buffer_fill.c:341:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:35:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:168:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:72:20-21:
WARNING: Use ARRAY_SIZE
tools/testing/selftests/arm64/mte/check_buffer_fill.c:369:25-26:
WARNING: Use ARRAY_SIZE
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Link: https://lore.kernel.org/r/20221105073143.78521-1-tegongkang@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The signal magic values are supposed to be allocated as somewhat meaningful
ASCII so if we encounter a bad magic value print the any alphanumeric
characters we find in it as well as the hex value to aid debuggability.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221102140543.98193-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When fixing up support for extra_context in the signal handling tests I
didn't notice that there is a TODO file in the directory which lists this
as a thing to be done. Since it's been done remove it from the list.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221027110324.33802-1-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Especially when the test is configured to run for a longer time it can be
reassuring to users to see that the supervising program is running OK so
provide a message every second when the output timer expires.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221017144553.773176-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently we don't have an explicit check that when it's been a second
since we have seen output produced from the test programs starting up that
means all of them are running and we should start both sending signals and
timing out. This is not reliable, especially on very heavily loaded systems
where the test programs might take longer than a second to run.
We do skip sending signals to children that have not produced output yet
so we won't cause them to exit unexpectedly by sending a signal but this
can create confusion when interpreting output, for example appearing to
show the tests running for less time than expected or appearing to show
missed signal deliveries. Avoid issues by explicitly checking that we have
seen output from all the child processes before we start sending signals
or counting test run time.
This is especially likely on virtual platforms with large numbers of vector
lengths supported since the platforms are slow and there will be a lot of
tasks per CPU.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221017144553.773176-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Commit 51aad1a6723b ("ACPICA: Finish support for the CDAT table")
did not add utcksum.o to the acpidump Makefile by mistake.
Do that now.
Fixes: 51aad1a6723b ("ACPICA: Finish support for the CDAT table")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Variable ret is compared with less than zero even though it was set as u32.
So u32 to int conversion is needed.
Signed-off-by: Kang Minchul <tegongkang@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20221105183656.86077-1-tegongkang@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"Several fixes for CXL region creation crashes, leaks and failures.
This is mainly fallout from the original implementation of dynamic CXL
region creation (instantiate new physical memory pools) that arrived
in v6.0-rc1.
Given the theme of "failures in the presence of pass-through decoders"
this also includes new regression test infrastructure for that case.
Summary:
- Fix region creation crash with pass-through decoders
- Fix region creation crash when no decoder allocation fails
- Fix region creation crash when scanning regions to enforce the
increasing physical address order constraint that CXL mandates
- Fix a memory leak for cxl_pmem_region objects, track 1:N instead of
1:1 memory-device-to-region associations.
- Fix a memory leak for cxl_region objects when regions with active
targets are deleted
- Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window)
emulated proximity domains.
- Fix region creation failure for switch attached devices downstream
of a single-port host-bridge
- Fix false positive memory leak of cxl_region objects by recycling
recently used region ids rather than freeing them
- Add regression test infrastructure for a pass-through decoder
configuration
- Fix some mailbox payload handling corner cases"
* tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Recycle region ids
cxl/region: Fix 'distance' calculation with passthrough ports
tools/testing/cxl: Add a single-port host-bridge regression config
tools/testing/cxl: Fix some error exits
cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
cxl/region: Fix cxl_region leak, cleanup targets at region delete
cxl/region: Fix region HPA ordering validation
cxl/pmem: Use size_add() against integer overflow
cxl/region: Fix decoder allocation crash
ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set
cxl/pmem: Fix failure to account for 8 byte header for writes to the device LSA.
cxl/region: Fix null pointer dereference due to pass through decoder commit
cxl/mbox: Add a check on input payload size
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
"2nd set of IIO fixes for 6.1
Another mixed bag of driver fixes.
* atmel,at91-sama5d2
- Drop a 5 degree offset as not needed for production devices.
- Missing iio_trigger_free() in error path.
* bosch,bma400
- Turn power on before trying to read chip ID.
* bosch,bno055
- Avoid uninitialized variable warning (no actual impact)
* meas,ms5611
- Fix multiple instances of driver sharing single prom array.
- Stop forcing SPI speed to max devices supports
* mps,mp2629
- Wrong structure field used to match channel.
- Missing NULL terminator.
* sysfs-trigger
- Fix memory leak in error path.
* tools
- Fix wrong read size when calling with noevents."
* tag 'iio-fixes-for-6.1b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
tools: iio: iio_generic_buffer: Fix read size
iio: imu: bno055: uninitialized variable bug in bno055_trigger_handler()
iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger()
iio: adc: mp2629: fix potential array out of bound access
iio: adc: mp2629: fix wrong comparison of channel
iio: pressure: ms5611: changed hardcoded SPI speed to value limited
iio: pressure: ms5611: fixed value compensation bug
iio: accel: bma400: Ensure VDDIO is enable defore reading the chip ID.
iio: adc: at91-sama5d2_adc: get rid of 5 degrees Celsius adjustment
iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init()
|
|
Jonathan reports that region creation fails when a single-port
host-bridge connects to a multi-port switch. Mock up that configuration
so a fix can be tested and regression tested going forward.
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: http://lore.kernel.org/r/20221010172057.00001559@huawei.com
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752184838.947915.2167957540894293891.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Fix a few typos where 'goto err_port' was used rather than the object
specific cleanup.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752184255.947915.16163477849330181425.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
lld produces "fast" style build-ids by default, which is inconsistent
with ld's "sha1" style. Explicitly specify build-id style to be "sha1"
when linking liburandom_read.so the same way it is already done for
urandom_read.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/bpf/20221104094016.102049-1-asavkov@redhat.com
|
|
Copy libbpf_strlcpy() from libbpf_internal.h to bpf_util.h, and rename it
to bpf_strlcpy(), then replace selftests strncpy()/libbpf_strlcpy() with
bpf_strlcpy(), fix compile warning.
The libbpf_internal.h header cannot be used directly here, because
references to cgroup_helpers.c in samples/bpf will generate compilation
errors. We also can't add libbpf_strlcpy() directly to bpf_util.h,
because the definition of libbpf_strlcpy() in libbpf_internal.h is
duplicated. In order not to modify the libbpf code, add a new function
bpf_strlcpy() to selftests bpf_util.h.
How to reproduce this compilation warning:
$ make -C samples/bpf
cgroup_helpers.c: In function ‘__enable_controllers’:
cgroup_helpers.c:80:17: warning: ‘strncpy’ specified bound 4097 equals destination size [-Wstringop-truncation]
80 | strncpy(enable, controllers, sizeof(enable));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/tencent_469D8AF32BD56816A29981BED06E96D22506@qq.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fix from Mickaël Salaün:
"Fix the test build for some distros"
* tag 'landlock-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Build without static libraries
|
|
A set of test cases to verify enum fwd resolution logic:
- verify that enum fwd can be resolved as full enum64;
- verify that enum64 fwd can be resolved as full enum;
- verify that enum size is considered when enums are compared for
equivalence.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221101235413.1824260-2-eddyz87@gmail.com
|
|
Changes de-duplication logic for enums in the following way:
- update btf_hash_enum to ignore size and kind fields to get
ENUM and ENUM64 types in a same hash bucket;
- update btf_compat_enum to consider enum fwd to be compatible with
full enum64 (and vice versa);
This allows BTF de-duplication in the following case:
// CU #1
enum foo;
struct s {
enum foo *a;
} *x;
// CU #2
enum foo {
x = 0xfffffffff // big enough to force enum64
};
struct s {
enum foo *a;
} *y;
De-duplicated BTF prior to this commit:
[1] ENUM64 'foo' encoding=UNSIGNED size=8 vlen=1
'x' val=68719476735ULL
[2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64
encoding=(none)
[3] STRUCT 's' size=8 vlen=1
'a' type_id=4 bits_offset=0
[4] PTR '(anon)' type_id=1
[5] PTR '(anon)' type_id=3
[6] STRUCT 's' size=8 vlen=1
'a' type_id=8 bits_offset=0
[7] ENUM 'foo' encoding=UNSIGNED size=4 vlen=0
[8] PTR '(anon)' type_id=7
[9] PTR '(anon)' type_id=6
De-duplicated BTF after this commit:
[1] ENUM64 'foo' encoding=UNSIGNED size=8 vlen=1
'x' val=68719476735ULL
[2] INT 'long unsigned int' size=8 bits_offset=0 nr_bits=64
encoding=(none)
[3] STRUCT 's' size=8 vlen=1
'a' type_id=4 bits_offset=0
[4] PTR '(anon)' type_id=1
[5] PTR '(anon)' type_id=3
Enum forward declarations in C do not provide information about
enumeration values range. Thus the `btf_type->size` field is
meaningless for forward enum declarations. In fact, GCC does not
encode size in DWARF for forward enum declarations
(but dwarves sets enumeration size to a default value of `sizeof(int) * 8`
when size is not specified see dwarf_loader.c:die__create_new_enumeration).
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221101235413.1824260-1-eddyz87@gmail.com
|
|
test_align selftest relies on BPF verifier log emitting register states
for specific instructions in expected format. Unfortunately, BPF
verifier precision backtracking log interferes with such expectations.
And instruction on which precision propagation happens sometimes don't
output full expected register states. This does indeed look like
something to be improved in BPF verifier, but is beyond the scope of
this patch set.
So to make test_align a bit more robust, inject few dummy R4 = R5
instructions which capture desired state of R5 and won't have precision
tracking logs on them. This fixes tests until we can improve BPF
verifier output in the presence of precision tracking.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221104163649.121784-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In some conditions, background processes in udpgro don't have enough
time to set up the sockets. When foreground processes start, this
results in the test failing with "./udpgso_bench_tx: sendmsg: Connection
refused". For instance, this happens from time to time on a Qualcomm
SA8540P SoC running CentOS Stream 9.
To fix this, increase the time given to background processes to
complete the startup before foreground processes start.
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Finally add support for filtering stats values, similar to
non-comparison mode filtering. For comparison mode 4 variants of stats
are important for filtering, as they allow to filter either A or B side,
but even more importantly they allow to filter based on value
difference, and for verdict stat value difference is MATCH/MISMATCH
classification. So with these changes it's finally possible to easily
check if there were any mismatches between failure/success outcomes on
two separate data sets. Like in an example below:
$ ./veristat -e file,prog,verdict,insns -C ~/baseline-results.csv ~/shortest-results.csv -f verdict_diff=mismatch
File Program Verdict (A) Verdict (B) Verdict (DIFF) Insns (A) Insns (B) Insns (DIFF)
------------------------------------- --------------------- ----------- ----------- -------------- --------- --------- -------------------
dynptr_success.bpf.linked1.o test_data_slice success failure MISMATCH 85 0 -85 (-100.00%)
dynptr_success.bpf.linked1.o test_read_write success failure MISMATCH 1992 0 -1992 (-100.00%)
dynptr_success.bpf.linked1.o test_ringbuf success failure MISMATCH 74 0 -74 (-100.00%)
kprobe_multi.bpf.linked1.o test_kprobe failure success MISMATCH 0 246 +246 (+100.00%)
kprobe_multi.bpf.linked1.o test_kprobe_manual failure success MISMATCH 0 246 +246 (+100.00%)
kprobe_multi.bpf.linked1.o test_kretprobe failure success MISMATCH 0 248 +248 (+100.00%)
kprobe_multi.bpf.linked1.o test_kretprobe_manual failure success MISMATCH 0 248 +248 (+100.00%)
kprobe_multi.bpf.linked1.o trigger failure success MISMATCH 0 2 +2 (+100.00%)
netcnt_prog.bpf.linked1.o bpf_nextcnt failure success MISMATCH 0 56 +56 (+100.00%)
pyperf600_nounroll.bpf.linked1.o on_event success failure MISMATCH 568128 1000001 +431873 (+76.02%)
ringbuf_bench.bpf.linked1.o bench_ringbuf success failure MISMATCH 8 0 -8 (-100.00%)
strobemeta.bpf.linked1.o on_event success failure MISMATCH 557149 1000001 +442852 (+79.49%)
strobemeta_nounroll1.bpf.linked1.o on_event success failure MISMATCH 57240 1000001 +942761 (+1647.03%)
strobemeta_nounroll2.bpf.linked1.o on_event success failure MISMATCH 501725 1000001 +498276 (+99.31%)
strobemeta_subprogs.bpf.linked1.o on_event success failure MISMATCH 65420 1000001 +934581 (+1428.59%)
test_map_in_map_invalid.bpf.linked1.o xdp_noop0 success failure MISMATCH 2 0 -2 (-100.00%)
test_mmap.bpf.linked1.o test_mmap success failure MISMATCH 46 0 -46 (-100.00%)
test_verif_scale3.bpf.linked1.o balancer_ingress success failure MISMATCH 845499 1000001 +154502 (+18.27%)
------------------------------------- --------------------- ----------- ----------- -------------- --------- --------- -------------------
Note that by filtering on verdict_diff=mismatch, it's now extremely easy and
fast to see any changes in verdict. Example above showcases both failure ->
success transitions (which are generally surprising) and success -> failure
transitions (which are expected if bugs are present).
Given veristat allows to query relative percent difference values, internal
logic for comparison mode is based on floating point numbers, so requires a bit
of epsilon precision logic, deviating from typical integer simple handling
rules.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221103055304.2904589-11-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce the concept of "stat variant", by which it's possible to
specify whether to use the value from A (baseline) side, B (comparison
or control) side, the absolute difference value or relative (percentage)
difference value.
To support specifying this, veristat recognizes `_a`, `_b`, `_diff`,
`_pct` suffixes, which can be appended to stat name(s). In
non-comparison mode variants are ignored (there is only `_a` variant
effectively), if no variant suffix is provided, `_b` is assumed, as
control group is of primary interest in comparison mode.
These stat variants can be flexibly combined with asc/desc orders.
Here's an example of ordering results first by verdict match/mismatch (or n/a
if one of the sides is missing; n/a is always considered to be the lowest
value), and within each match/mismatch/n/a group further sort by number of
instructions in B side. In this case we don't have MISMATCH cases, but N/A are
split from MATCH, demonstrating this custom ordering.
$ ./veristat -e file,prog,verdict,insns -s verdict_diff,insns_b_ -C ~/base.csv ~/comp.csv
File Program Verdict (A) Verdict (B) Verdict (DIFF) Insns (A) Insns (B) Insns (DIFF)
------------------ ------------------------------ ----------- ----------- -------------- --------- --------- --------------
bpf_xdp.o tail_lb_ipv6 N/A success N/A N/A 151895 N/A
bpf_xdp.o tail_nodeport_nat_egress_ipv4 N/A success N/A N/A 15619 N/A
bpf_xdp.o tail_nodeport_ipv6_dsr N/A success N/A N/A 1206 N/A
bpf_xdp.o tail_nodeport_ipv4_dsr N/A success N/A N/A 1162 N/A
bpf_alignchecker.o tail_icmp6_send_echo_reply N/A failure N/A N/A 74 N/A
bpf_alignchecker.o __send_drop_notify success N/A N/A 53 N/A N/A
bpf_host.o __send_drop_notify success N/A N/A 53 N/A N/A
bpf_host.o cil_from_host success N/A N/A 762 N/A N/A
bpf_xdp.o tail_lb_ipv4 success success MATCH 71736 73430 +1694 (+2.36%)
bpf_xdp.o tail_handle_nat_fwd_ipv4 success success MATCH 21547 20920 -627 (-2.91%)
bpf_xdp.o tail_rev_nodeport_lb6 success success MATCH 17954 17905 -49 (-0.27%)
bpf_xdp.o tail_handle_nat_fwd_ipv6 success success MATCH 16974 17039 +65 (+0.38%)
bpf_xdp.o tail_nodeport_nat_ingress_ipv4 success success MATCH 7658 7713 +55 (+0.72%)
bpf_xdp.o tail_rev_nodeport_lb4 success success MATCH 7126 6934 -192 (-2.69%)
bpf_xdp.o tail_nodeport_nat_ingress_ipv6 success success MATCH 6405 6397 -8 (-0.12%)
bpf_xdp.o tail_nodeport_nat_ipv6_egress failure failure MATCH 752 752 +0 (+0.00%)
bpf_xdp.o cil_xdp_entry success success MATCH 423 423 +0 (+0.00%)
bpf_xdp.o __send_drop_notify success success MATCH 151 151 +0 (+0.00%)
bpf_alignchecker.o tail_icmp6_handle_ns failure failure MATCH 33 33 +0 (+0.00%)
------------------ ------------------------------ ----------- ----------- -------------- --------- --------- --------------
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221103055304.2904589-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When comparing two datasets, if either side is missing corresponding
record with the same file and prog name, currently veristat emits
misleading zeros/failures, and even tried to calculate a difference,
even though there is no data to compare against.
This patch improves internal logic of handling such situations. Now
we'll emit "N/A" in places where data is missing and comparison is
non-sensical.
As an example, in an artificially truncated and mismatched Cilium
results, the output looks like below:
$ ./veristat -e file,prog,verdict,insns -C ~/base.csv ~/comp.csv
File Program Verdict (A) Verdict (B) Verdict (DIFF) Insns (A) Insns (B) Insns (DIFF)
------------------ ------------------------------ ----------- ----------- -------------- --------- --------- --------------
bpf_alignchecker.o __send_drop_notify success N/A N/A 53 N/A N/A
bpf_alignchecker.o tail_icmp6_handle_ns failure failure MATCH 33 33 +0 (+0.00%)
bpf_alignchecker.o tail_icmp6_send_echo_reply N/A failure N/A N/A 74 N/A
bpf_host.o __send_drop_notify success N/A N/A 53 N/A N/A
bpf_host.o cil_from_host success N/A N/A 762 N/A N/A
bpf_xdp.o __send_drop_notify success success MATCH 151 151 +0 (+0.00%)
bpf_xdp.o cil_xdp_entry success success MATCH 423 423 +0 (+0.00%)
bpf_xdp.o tail_handle_nat_fwd_ipv4 success success MATCH 21547 20920 -627 (-2.91%)
bpf_xdp.o tail_handle_nat_fwd_ipv6 success success MATCH 16974 17039 +65 (+0.38%)
bpf_xdp.o tail_lb_ipv4 success success MATCH 71736 73430 +1694 (+2.36%)
bpf_xdp.o tail_lb_ipv6 N/A success N/A N/A 151895 N/A
bpf_xdp.o tail_nodeport_ipv4_dsr N/A success N/A N/A 1162 N/A
bpf_xdp.o tail_nodeport_ipv6_dsr N/A success N/A N/A 1206 N/A
bpf_xdp.o tail_nodeport_nat_egress_ipv4 N/A success N/A N/A 15619 N/A
bpf_xdp.o tail_nodeport_nat_ingress_ipv4 success success MATCH 7658 7713 +55 (+0.72%)
bpf_xdp.o tail_nodeport_nat_ingress_ipv6 success success MATCH 6405 6397 -8 (-0.12%)
bpf_xdp.o tail_nodeport_nat_ipv6_egress failure failure MATCH 752 752 +0 (+0.00%)
bpf_xdp.o tail_rev_nodeport_lb4 success success MATCH 7126 6934 -192 (-2.69%)
bpf_xdp.o tail_rev_nodeport_lb6 success success MATCH 17954 17905 -49 (-0.27%)
------------------ ------------------------------ ----------- ----------- -------------- --------- --------- --------------
Internally veristat now separates joining two datasets and remembering the
join, and actually emitting a comparison view. This will come handy when we add
support for filtering and custom ordering in comparison mode.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221103055304.2904589-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Make veristat distinguish between table and CSV output formats and use
different default set of stats (columns) that are emitted. While for
human-readable table output it doesn't make sense to output all known
stats, it is very useful for CSV mode to record all possible data, so
that it can later be queried and filtered in replay or comparison mode.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221103055304.2904589-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Define simple expressions to filter not just by file and program name,
but also by resulting values of collected stats. Support usual
equality and inequality operators. Verdict, which is a boolean-like
field can be also filtered either as 0/1, failure/success (with f/s,
fail/succ, and failure/success aliases) symbols, or as false/true (f/t).
Aliases are case insensitive.
Currently this filtering is honored only in verification and replay
modes. Comparison mode support will be added in next patch.
Here's an example of verifying a bunch of BPF object files and emitting
only results for successfully validated programs that have more than 100
total instructions processed by BPF verifier, sorted by number of
instructions in ascending order:
$ sudo ./veristat *.bpf.o -s insns^ -f 'insns>100'
There can be many filters (both allow and deny flavors), all of them are
combined.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221103055304.2904589-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
