| Age | Commit message (Collapse) | Author |
|---|
|
KVM SVM changes for 6.16:
- Wait for target vCPU to acknowledge KVM_REQ_UPDATE_PROTECTED_GUEST_STATE to
fix a race between AP destroy and VMRUN.
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for the VM.
- Add support for ALLOWED_SEV_FEATURES.
- Add #VMGEXIT to the set of handlers special cased for CONFIG_RETPOLINE=y.
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing features
that utilize those bits.
- Don't account temporary allocations in sev_send_update_data().
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock Threshold.
|
|
KVM selftests changes for 6.16:
- Add support for SNP to the various SEV selftests.
- Add a selftest to verify fastops instructions via forced emulation.
- Add MGLRU support to the access tracking perf test.
|
|
KVM x86 misc changes for 6.16:
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU IBPB, between
SVM and VMX.
- Advertise support to userspace for WRMSRNS and PREFETCHI.
- Rescan I/O APIC routes after handling EOI that needed to be intercepted due
to the old/previous routing, but not the new/current routing.
- Add a module param to control and enumerate support for device posted
interrupts.
- Misc cleanups.
|
|
KVM/riscv changes for 6.16
- Add vector registers to get-reg-list selftest
- VCPU reset related improvements
- Remove scounteren initialization from VCPU reset
- Support VCPU reset from userspace using set_mpstate() ioctl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.16
* New features:
- Add large stage-2 mapping support for non-protected pKVM guests,
clawing back some performance.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and
protected modes.
- Enable nested virtualisation support on systems that support it
(yes, it has been a long time coming), though it is disabled by
default.
* Improvements, fixes and cleanups:
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. This ensures correctness of
emulation (the data is automatically extracted from the published
JSON files), and helps dealing with the evolution of the
architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
|
|
* kvm-arm64/misc-6.16:
: .
: Misc changes and improvements for 6.16:
:
: - Add a new selftest for the SVE host state being corrupted by a guest
:
: - Keep HCR_EL2.xMO set at all times for systems running with the kernel at EL2,
: ensuring that the window for interrupts is slightly bigger, and avoiding
: a pretty bad erratum on the AmpereOne HW
:
: - Replace a couple of open-coded on/off strings with str_on_off()
:
: - Get rid of the pKVM memblock sorting, which now appears to be superflous
:
: - Drop superflous clearing of ICH_LR_EOI in the LR when nesting
:
: - Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers from
: a pretty bad case of TLB corruption unless accesses to HCR_EL2 are
: heavily synchronised
:
: - Add a per-VM, per-ITS debugfs entry to dump the state of the ITS tables
: in a human-friendly fashion
: .
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: vgic-its: Add debugfs interface to expose ITS tables
arm64: errata: Work around AmpereOne's erratum AC04_CPU_23
KVM: arm64: nv: Remove clearing of ICH_LR<n>.EOI if ICH_LR<n>.HW == 1
KVM: arm64: Drop sort_memblock_regions()
KVM: arm64: selftests: Add test for SVE host corruption
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Replace ternary flags with str_on_off() helper
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/fgt-masks: (43 commits)
: .
: Large rework of the way KVM deals with trap bits in conjunction with
: the CPU feature registers. It now draws a direct link between which
: the feature set, the system registers that need to UNDEF to match
: the configuration and bits that need to behave as RES0 or RES1 in
: the trap registers that are visible to the guest.
:
: Best of all, these definitions are mostly automatically generated
: from the JSON description published by ARM under a permissive
: license.
: .
KVM: arm64: Handle TSB CSYNC traps
KVM: arm64: Add FGT descriptors for FEAT_FGT2
KVM: arm64: Allow sysreg ranges for FGT descriptors
KVM: arm64: Add context-switch for FEAT_FGT2 registers
KVM: arm64: Add trap routing for FEAT_FGT2 registers
KVM: arm64: Add sanitisation for FEAT_FGT2 registers
KVM: arm64: Add FEAT_FGT2 registers to the VNCR page
KVM: arm64: Use HCR_EL2 feature map to drive fixed-value bits
KVM: arm64: Use HCRX_EL2 feature map to drive fixed-value bits
KVM: arm64: Allow kvm_has_feat() to take variable arguments
KVM: arm64: Use FGT feature maps to drive RES0 bits
KVM: arm64: Validate FGT register descriptions against RES0 masks
KVM: arm64: Switch to table-driven FGU configuration
KVM: arm64: Handle PSB CSYNC traps
KVM: arm64: Use KVM-specific HCRX_EL2 RES0 mask
KVM: arm64: Remove hand-crafted masks for FGT registers
KVM: arm64: Use computed FGT masks to setup FGT registers
KVM: arm64: Propagate FGT masks to the nVHE hypervisor
KVM: arm64: Unconditionally configure fine-grain traps
KVM: arm64: Use computed masks as sanitisers for FGT registers
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/mte-frac:
: .
: Prevent FEAT_MTE_ASYNC from being accidently exposed to a guest,
: courtesy of Ben Horgan. From the cover letter:
:
: "The ID_AA64PFR1_EL1.MTE_frac field is currently hidden from KVM.
: However, when ID_AA64PFR1_EL1.MTE==2, ID_AA64PFR1_EL1.MTE_frac==0
: indicates that MTE_ASYNC is supported. On a host with
: ID_AA64PFR1_EL1.MTE==2 but without MTE_ASYNC support a guest with the
: MTE capability enabled will incorrectly see MTE_ASYNC advertised as
: supported. This series fixes that."
: .
KVM: selftests: Confirm exposing MTE_frac does not break migration
KVM: arm64: Make MTE_frac masking conditional on MTE capability
arm64/sysreg: Expose MTE_frac so that it is visible to KVM
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add vector related tests with the ISA extension standard template.
However, the vector registers are bit tricky as the register length is
variable based on vlenb value of the system. That's why the macros are
defined with a default and overidden with actual value at runtime.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250430-kvm_selftest_improve-v3-3-eea270ff080b@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Currently, the sbi_pmu_test continues if the exception type is illegal
instruction because access to hpmcounter will generate that. However
illegal instruction exception may occur due to the other reasons
which should result in test assertion.
Use the stval to decode the exact type of instructions and which csrs are
being accessed if it is csr access instructions. Assert in all cases
except if it is a csr access instructions that access valid PMU related
registers.
Take this opportunity to remove the CSR_CYCLEH reference as the test is
compiled for RV64 only.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250430-kvm_selftest_improve-v3-2-eea270ff080b@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The current exeception register structure in selftests are missing
few registers (e.g stval). Instead of adding it manually, change
the ex_regs to align with pt_regs to make it future proof.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250430-kvm_selftest_improve-v3-1-eea270ff080b@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Some common KVM test cases are supported on LoongArch now as following:
coalesced_io_test
demand_paging_test
dirty_log_perf_test
dirty_log_test
guest_print_test
hardware_disable_test
kvm_binary_stats_test
kvm_create_max_vcpus
kvm_page_table_test
memslot_modification_stress_test
memslot_perf_test
set_memory_region_test
And other test cases are not supported by LoongArch such as rseq_test,
since it is not supported on LoongArch physical machine either.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add ucall test support for LoongArch, ucall method on LoongArch uses
undefined mmio area. It will cause vCPU exiting to hypervisor so that
hypervisor can communicate with vCPU.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add core KVM selftests support for LoongArch, it includes exception
handler, mmu page table setup and vCPU startup entry support.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add KVM selftests header files for LoongArch, including processor.h
and kvm_util_arch.h. It mainly contains LoongArch CSR register and page
table entry definition.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
On LoongArch system, 16K page is used in general and GVA width is 47 bit
while GPA width is 47 bit also, here add new VM mode VM_MODE_P47V47_16K.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add a test case to verify x86's bus lock exit functionality, which is now
supported on both Intel and AMD. Trigger bus lock exits by performing a
split-lock access, i.e. an atomic access that splits two cache lines.
Verify that the correct number of bus lock exits are generated, and that
the counter is incremented correctly and at the appropriate time based on
the underlying architecture.
Generate bus locks in both L1 and L2 (if nested virtualization is enabled),
as SVM's functionality in particular requires non-trivial logic to do the
right thing when running nested VMs.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Co-developed-by: Manali Shukla <manali.shukla@amd.com>
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Link: https://lore.kernel.org/r/20250502050346.14274-6-manali.shukla@amd.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use MGLRU's debugfs interface to do access tracking instead of
page_idle. The logic to use the page_idle bitmap is left in, as it is
useful for kernels that do not have MGLRU built in.
When MGLRU is enabled, page_idle will report pages as still idle even
after being accessed, as MGLRU doesn't necessarily clear the Idle folio
flag when accessing an idle page, so the test will not attempt to use
page_idle if MGLRU is enabled but otherwise not usable.
Aging pages with MGLRU is much faster than marking pages as idle with
page_idle.
Co-developed-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-8-jthoughton@google.com
[sean: print parsed features, not raw string]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
libcgroup.o is built separately from KVM selftests and cgroup selftests,
so different compiler flags used by the different selftests will not
conflict with each other.
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-7-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add an API in the cgroups library to find the root of a specific
controller. KVM selftests will use the API to find the memory controller.
Search for the controller on both v1 and v2 mounts, as KVM selftests'
usage will be completely oblivious of v1 versus v2.
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-6-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM selftests will soon need to use some of the cgroup creation and
deletion functionality from cgroup_util.
Suggested-by: David Matlack <dmatlack@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250508184649.2576210-5-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move a handful of helpers out of cgroup_util.c and into test_memcontrol.c
that have nothing to with cgroups in general, in anticipation of making
cgroup_util.c a generic library that can be used by other selftests.
Make read_text() and write_text() non-static so test_memcontrol.c can
use them.
Signed-off-by: James Houghton <jthoughton@google.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-4-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add an option to skip sanity check of number of still idle pages,
and set it by default to skip, in case hypervisor or NUMA balancing
is detected.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Co-developed-by: James Houghton <jthoughton@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-3-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extract the guts of thp_configured() and get_trans_hugepagesz() to
standalone helpers so that the core logic can be reused for other sysfs
files, e.g. to query numa_balancing.
Opportunistically assert that the initial fscanf() read at least one byte,
and add a comment explaining the second call to fscanf().
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-2-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When MTE is supported but MTE_ASYMM is not (ID_AA64PFR1_EL1.MTE == 2)
ID_AA64PFR1_EL1.MTE_frac == 0xF indicates MTE_ASYNC is unsupported
and MTE_frac == 0 indicates it is supported.
As MTE_frac was previously unconditionally read as 0 from the guest
and user-space, check that using SET_ONE_REG to set it to 0 succeeds
but does not change MTE_frac from unsupported (0xF) to supported (0).
This is required as values originating from KVM from user-space must
be accepted to avoid breaking migration.
Also, to allow this MTE field to be tested, enable KVM_ARM_CAP_MTE
for the set_id_regs test. No effect on existing tests is expected.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Link: https://lore.kernel.org/r/20250512114112.359087-4-ben.horgan@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth and wireless.
A few more fixes for the locking changes trickling in. Nothing too
alarming, I suspect those will continue for another release. Other
than that things are slowing down nicely.
Current release - fix to a fix:
- Bluetooth: hci_event: use key encryption size when its known
- tools: ynl-gen: allow multi-attr without nested-attributes again
Current release - regressions:
- locking fixes:
- lock lower level devices when updating features
- eth: bnxt_en: bring back rtnl_lock() in the bnxt_open() path
- devmem: fix panic when Netlink socket closes after module unload
Current release - new code bugs:
- eth: txgbe: fixes for FW communication on new AML devices
Previous releases - always broken:
- sched: flush gso_skb list too during ->change(), avoid potential
null-deref on reconfig
- wifi: mt76: disable NAPI on driver removal
- hv_netvsc: fix error 'nvsp_rndis_pkt_complete error status: 2'"
* tag 'net-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
net: devmem: fix kernel panic when netlink socket close after module unload
tsnep: fix timestamping with a stacked DSA driver
net/tls: fix kernel panic when alloc_page failed
bnxt_en: bring back rtnl_lock() in the bnxt_open() path
mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
octeontx2-pf: Do not reallocate all ntuple filters
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
hv_netvsc: Remove rmsg_pgcnt
hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
octeontx2-af: Fix CGX Receive counters
net: ethernet: mtk_eth_soc: fix typo for declaration MT7988 ESW capability
net: libwx: Fix FW mailbox unknown command
net: libwx: Fix FW mailbox reply timeout
net: txgbe: Fix to calculate EEPROM checksum for AML devices
octeontx2-pf: macsec: Fix incorrect max transmit size in TX secy
...
|
|
These tests:
"SOCK_STREAM ioctl(SIOCOUTQ) 0 unsent bytes"
"SOCK_SEQPACKET ioctl(SIOCOUTQ) 0 unsent bytes"
output: "Unexpected 'SIOCOUTQ' value, expected 0, got 64 (CLIENT)".
They test that the SIOCOUTQ ioctl reports 0 unsent bytes after the data
have been received by the other side. However, sometimes there is a delay
in updating this "unsent bytes" counter, and the test fails even though
the counter properly goes to 0 several milliseconds later.
The delay occurs in the kernel because the used buffer notification
callback virtio_vsock_tx_done(), called upon receipt of the data by the
other side, doesn't update the counter itself. It delegates that to
a kernel thread (via vsock->tx_work). Sometimes that thread is delayed
more than the test expects.
Change the test to poll SIOCOUTQ until it returns 0 or a timeout occurs.
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 18ee44ce97c1 ("test/vsock: add ioctl unsent bytes test")
Link: https://patch.msgid.link/20250507151456.2577061-1-kshk@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit ce6cb8113c84 ("tools: ynl-gen: individually free previous
values on double set"), specifying the "multi-attr" property raises an
error unless the "nested-attributes" property is specified as well:
File "tools/net/ynl/./pyynl/ynl_gen_c.py", line 1147, in _load_nested_sets
child = self.pure_nested_structs.get(nested)
^^^^^^
UnboundLocalError: cannot access local variable 'nested' where it is not associated with a value
This appears to be a bug since there are existing specs which omit
"nested-attributes" on "multi-attr" attributes. Also, according to
Documentation/userspace-api/netlink/specs.rst, multi-attr "is the
recommended way of implementing arrays (no extra nesting)", suggesting
that nesting should even be avoided in favor of multi-attr.
Fix the indentation of the if-block introduced by the commit to avoid
the error.
Fixes: ce6cb8113c84 ("tools: ynl-gen: individually free previous values on double set")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/d6b58684b7e5bfb628f7313e6893d0097904e1d1.1746940107.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 ITS mitigation from Dave Hansen:
"Mitigate Indirect Target Selection (ITS) issue.
I'd describe this one as a good old CPU bug where the behavior is
_obviously_ wrong, but since it just results in bad predictions it
wasn't wrong enough to notice. Well, the researchers noticed and also
realized that thus bug undermined a bunch of existing indirect branch
mitigations.
Thus the unusually wide impact on this one. Details:
ITS is a bug in some Intel CPUs that affects indirect branches
including RETs in the first half of a cacheline. Due to ITS such
branches may get wrongly predicted to a target of (direct or indirect)
branch that is located in the second half of a cacheline. Researchers
at VUSec found this behavior and reported to Intel.
Affected processors:
- Cascade Lake, Cooper Lake, Whiskey Lake V, Coffee Lake R, Comet
Lake, Ice Lake, Tiger Lake and Rocket Lake.
Scope of impact:
- Guest/host isolation:
When eIBRS is used for guest/host isolation, the indirect branches
in the VMM may still be predicted with targets corresponding to
direct branches in the guest.
- Intra-mode using cBPF:
cBPF can be used to poison the branch history to exploit ITS.
Realigning the indirect branches and RETs mitigates this attack
vector.
- User/kernel:
With eIBRS enabled user/kernel isolation is *not* impacted by ITS.
- Indirect Branch Prediction Barrier (IBPB):
Due to this bug indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB.
This will be fixed in the microcode.
Mitigation:
As indirect branches in the first half of cacheline are affected, the
mitigation is to replace those indirect branches with a call to thunk that
is aligned to the second half of the cacheline.
RETs that take prediction from RSB are not affected, but they may be
affected by RSB-underflow condition. So, RETs in the first half of
cacheline are also patched to a return thunk that executes the RET aligned
to second half of cacheline"
* tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftest/x86/bugs: Add selftests for ITS
x86/its: FineIBT-paranoid vs ITS
x86/its: Use dynamic thunks for indirect branches
x86/ibt: Keep IBT disabled during alternative patching
mm/execmem: Unify early execmem_cache behaviour
x86/its: Align RETs in BHB clear sequence to avoid thunking
x86/its: Add support for RSB stuffing mitigation
x86/its: Add "vmexit" option to skip mitigation on some CPUs
x86/its: Enable Indirect Target Selection mitigation
x86/its: Add support for ITS-safe return thunk
x86/its: Add support for ITS-safe indirect thunk
x86/its: Enumerate Indirect Target Selection (ITS) bug
Documentation: x86/bugs/its: Add ITS documentation
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing
interrupts to be taken while TGE=0 and fixing an ugly bug on
AmpereOne that occurs when taking an interrupt while clearing the
xMO bits (AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized
by KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
- Add missing reset of smstateen CSRs
x86:
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid
causing problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to
sanitize the VMCB as its state is undefined after SHUTDOWN,
emulating INIT is the least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a
stale root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB
page to print state, so that KVM doesn't print stale/wrong
information.
- When changing memory attributes (e.g. shared <=> private), add
potential hugepage ranges to the mmu_invalidate_range_{start,end}
set so that KVM doesn't create a shared/private hugepage when the
the corresponding attributes will become mixed (the attributes are
commited *after* KVM finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM
has at least one active VM. Effectively BP_SPEC_REDUCE when KVM is
loaded led to very measurable performance regressions for non-KVM
workloads"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Set/clear SRSO's BP_SPEC_REDUCE on 0 <=> 1 VM count transitions
KVM: arm64: Fix memory check in host_stage2_set_owner_locked()
KVM: arm64: Kill HCRX_HOST_FLAGS
KVM: arm64: Properly save/restore HCRX_EL2
KVM: arm64: selftest: Don't try to disable AArch64 support
KVM: arm64: Prevent userspace from disabling AArch64 support at any virtualisable EL
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()
KVM: x86/mmu: Prevent installing hugepages when mem attributes are changing
KVM: SVM: Update dump_ghcb() to use the GHCB snapshot fields
KVM: RISC-V: reset smstateen CSRs
KVM: x86/mmu: Check and free obsolete roots in kvm_mmu_reload()
KVM: x86: Check that the high 32bits are clear in kvm_arch_vcpu_ioctl_run()
KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes. 13 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: fix folio_pte_batch() on XEN PV
nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()
mm/hugetlb: copy the CMA flag when demoting
mm, swap: fix false warning for large allocation with !THP_SWAP
selftests/mm: fix a build failure on powerpc
selftests/mm: fix build break when compiling pkey_util.c
mm: vmalloc: support more granular vrealloc() sizing
tools/testing/selftests: fix guard region test tmpfs assumption
ocfs2: stop quota recovery before disabling quotas
ocfs2: implement handshaking with ocfs2 recovery thread
ocfs2: switch osb->disable_recovery to enum
mailmap: map Uwe's BayLibre addresses to a single one
MAINTAINERS: add mm THP section
mm/userfaultfd: fix uninitialized output field for -EAGAIN race
selftests/mm: compaction_test: support platform with huge mount of memory
MAINTAINERS: add core mm section
ocfs2: fix panic in failed foilio allocation
mm/huge_memory: fix dereferencing invalid pmd migration entry
MAINTAINERS: add reverse mapping section
x86: disable image size check for test builds
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.15, round #3
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts
to be taken while TGE=0 and fixing an ugly bug on AmpereOne that
occurs when taking an interrupt while clearing the xMO bits
(AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized by
KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
|
|
netdev_bind_rx takes ownership of the queue array passed as parameter
and frees it, so a queue array buffer cannot be reused across multiple
netdev_bind_rx calls.
This commit fixes that by always passing in a newly created queue array
to all netdev_bind_rx calls in ncdevmem.
Fixes: 85585b4bc8d8 ("selftests: add ncdevmem, netcat for devmem TCP")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508084434.1933069-1-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a crash in the ethtool YNL implementation when Hardware Clock information
is not present in the response. This ensures graceful handling of devices or
drivers that do not provide this optional field. e.g.
Traceback (most recent call last):
File "/net/tools/net/ynl/pyynl/./ethtool.py", line 438, in <module>
main()
~~~~^^
File "/net/tools/net/ynl/pyynl/./ethtool.py", line 341, in main
print(f'PTP Hardware Clock: {tsinfo["phc-index"]}')
~~~~~~^^^^^^^^^^^^^
KeyError: 'phc-index'
Fixes: f3d07b02b2b8 ("tools: ynl: ethtool testing tool")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508035414.82974-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88.0
- Clean Rust (and Clippy) lints for the upcoming Rust 1.87.0 and 1.88.0
releases
- Clean objtool warning for the upcoming Rust 1.87.0 release by adding
one more noreturn function
* tag 'rust-fixes-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
x86/Kconfig: make CFI_AUTO_DEFAULT depend on !RUST or Rust >= 1.88
rust: clean Rust 1.88.0's `clippy::uninlined_format_args` lint
rust: clean Rust 1.88.0's warning about `clippy::disallowed_macros` configuration
rust: clean Rust 1.88.0's `unnecessary_transmutes` lint
rust: allow Rust 1.87.0's `clippy::ptr_eq` lint
objtool/rust: add one more `noreturn` Rust function for Rust 1.87.0
|
|
Below are the tests added for Indirect Target Selection (ITS):
- its_sysfs.py - Check if sysfs reflects the correct mitigation status for
the mitigation selected via the kernel cmdline.
- its_permutations.py - tests mitigation selection with cmdline
permutations with other bugs like spectre_v2 and retbleed.
- its_indirect_alignment.py - verifies that for addresses in
.retpoline_sites section that belong to lower half of cacheline are
patched to ITS-safe thunk. Typical output looks like below:
Site 49: function symbol: __x64_sys_restart_syscall+0x1f <0xffffffffbb1509af>
# vmlinux: 0xffffffff813509af: jmp 0xffffffff81f5a8e0
# kcore: 0xffffffffbb1509af: jmpq *%rax
# ITS thunk NOT expected for site 49
# PASSED: Found *%rax
#
Site 50: function symbol: __resched_curr+0xb0 <0xffffffffbb181910>
# vmlinux: 0xffffffff81381910: jmp 0xffffffff81f5a8e0
# kcore: 0xffffffffbb181910: jmp 0xffffffffc02000fc
# ITS thunk expected for site 50
# PASSED: Found 0xffffffffc02000fc -> jmpq *%rax <scattered-thunk?>
- its_ret_alignment.py - verifies that for addresses in .return_sites
section that belong to lower half of cacheline are patched to
its_return_thunk. Typical output looks like below:
Site 97: function symbol: collect_event+0x48 <0xffffffffbb007f18>
# vmlinux: 0xffffffff81207f18: jmp 0xffffffff81f5b500
# kcore: 0xffffffffbb007f18: jmp 0xffffffffbbd5b560
# PASSED: Found jmp 0xffffffffbbd5b560 <its_return_thunk>
#
Site 98: function symbol: collect_event+0xa4 <0xffffffffbb007f74>
# vmlinux: 0xffffffff81207f74: jmp 0xffffffff81f5b500
# kcore: 0xffffffffbb007f74: retq
# PASSED: Found retq
Some of these tests have dependency on tools like virtme-ng[1] and drgn[2].
When the dependencies are not met, the test will be skipped.
[1] https://github.com/arighi/virtme-ng
[2] https://github.com/osandov/drgn
Co-developed-by: Tao Zhang <tao1.zhang@linux.intel.com>
Signed-off-by: Tao Zhang <tao1.zhang@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
|
|
FineIBT-paranoid was using the retpoline bytes for the paranoid check,
disabling retpolines, because all parts that have IBT also have eIBRS
and thus don't need no stinking retpolines.
Except... ITS needs the retpolines for indirect calls must not be in
the first half of a cacheline :-/
So what was the paranoid call sequence:
<fineibt_paranoid_start>:
0: 41 ba 78 56 34 12 mov $0x12345678, %r10d
6: 45 3b 53 f7 cmp -0x9(%r11), %r10d
a: 4d 8d 5b <f0> lea -0x10(%r11), %r11
e: 75 fd jne d <fineibt_paranoid_start+0xd>
10: 41 ff d3 call *%r11
13: 90 nop
Now becomes:
<fineibt_paranoid_start>:
0: 41 ba 78 56 34 12 mov $0x12345678, %r10d
6: 45 3b 53 f7 cmp -0x9(%r11), %r10d
a: 4d 8d 5b f0 lea -0x10(%r11), %r11
e: 2e e8 XX XX XX XX cs call __x86_indirect_paranoid_thunk_r11
Where the paranoid_thunk looks like:
1d: <ea> (bad)
__x86_indirect_paranoid_thunk_r11:
1e: 75 fd jne 1d
__x86_indirect_its_thunk_r11:
20: 41 ff eb jmp *%r11
23: cc int3
[ dhansen: remove initialization to false ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
|
|
Added new test cases for FQ, FQ_CODEL, FQ_PIE, and HHF qdiscs to verify queue
trimming behavior when the qdisc limit is dynamically reduced.
Each test injects packets, reduces the qdisc limit, and checks that the new
limit is enforced. This is still best effort since timing qdisc backlog
is not easy.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, WiFi and netfilter.
We have still a comple of regressions open due to the recent
drivers locking refactor. The patches are in-flight, but not
ready yet.
Current release - regressions:
- core: lock netdevices during dev_shutdown
- sch_htb: make htb_deactivate() idempotent
- eth: virtio-net: don't re-enable refill work too early
Current release - new code bugs:
- eth: icssg-prueth: fix kernel panic during concurrent Tx queue
access
Previous releases - regressions:
- gre: fix again IPv6 link-local address generation.
- eth: b53: fix learning on VLAN unaware bridges
Previous releases - always broken:
- wifi: fix out-of-bounds access during multi-link element
defragmentation
- can:
- initialize spin lock on device probe
- fix order of unregistration calls
- openvswitch: fix unsafe attribute parsing in output_userspace()
- eth:
- virtio-net: fix total qstat values
- mtk_eth_soc: reset all TX queues on DMA free
- fbnic: firmware IPC mailbox fixes"
* tag 'net-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
virtio-net: fix total qstat values
net: export a helper for adding up queue stats
fbnic: Do not allow mailbox to toggle to ready outside fbnic_mbx_poll_tx_ready
fbnic: Pull fbnic_fw_xmit_cap_msg use out of interrupt context
fbnic: Improve responsiveness of fbnic_mbx_poll_tx_ready
fbnic: Cleanup handling of completions
fbnic: Actually flush_tx instead of stalling out
fbnic: Add additional handling of IRQs
fbnic: Gate AXI read/write enabling on FW mailbox
fbnic: Fix initialization of mailbox descriptor rings
net: dsa: b53: do not set learning and unicast/multicast on up
net: dsa: b53: fix learning on VLAN unaware bridges
net: dsa: b53: fix toggling vlan_filtering
net: dsa: b53: do not program vlans when vlan filtering is off
net: dsa: b53: do not allow to configure VLAN 0
net: dsa: b53: always rejoin default untagged VLAN on bridge leave
net: dsa: b53: fix VLAN ID for untagged vlan on bridge leave
net: dsa: b53: fix flushing old pvid VLAN on pvid change
net: dsa: b53: fix clearing PVID of a port
net: dsa: b53: keep CPU port always tagged again
...
|
|
Add a test to verify KVM's fastops emulation via forced emulation. KVM's
so called "fastop" infrastructure executes the to-be-emulated instruction
directly on hardware instead of manually emulating the instruction in
software, using various shenanigans to glue together the emulator context
and CPU state, e.g. to get RFLAGS fed into the instruction and back out
for the emulator.
Add testcases for all instructions that are low hanging fruit. While the
primary goal of the selftest is to validate the glue code, a secondary
goal is to ensure "emulation" matches hardware exactly, including for
arithmetic flags that are architecturally undefined. While arithmetic
flags may be *architecturally* undefined, their behavior is deterministic
for a given CPU (likely a given uarch, and possibly even an entire family
or class of CPUs). I.e. KVM has effectively been emulating underlying
hardware behavior for years.
Link: https://lore.kernel.org/r/20250506011250.1089254-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The compiler is unaware of the size of code generated by the ".rept"
assembler directive. This results in the compiler emitting branch
instructions where the offset to branch to exceeds the maximum allowed
value, resulting in build failures like the following:
CC protection_keys
/tmp/ccypKWAE.s: Assembler messages:
/tmp/ccypKWAE.s:2073: Error: operand out of range (0x0000000000020158
is not between 0xffffffffffff8000 and 0x0000000000007ffc)
/tmp/ccypKWAE.s:2509: Error: operand out of range (0x0000000000020130
is not between 0xffffffffffff8000 and 0x0000000000007ffc)
Fix the issue by manually adding nop instructions using the preprocessor.
Link: https://lkml.kernel.org/r/20250428131937.641989-2-nysal@linux.ibm.com
Fixes: 46036188ea1f ("selftests/mm: build with -O2")
Reported-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 50910acd6f615 ("selftests/mm: use sys_pkey helpers consistently")
added a pkey_util.c to refactor some of the protection_keys functions
accessible by other tests. But this broken the build in powerpc in two
ways,
pkey-powerpc.h: In function `arch_is_powervm':
pkey-powerpc.h:73:21: error: storage size of `buf' isn't known
73 | struct stat buf;
| ^~~
pkey-powerpc.h:75:14: error: implicit declaration of function `stat'; did you mean `strcat'? [-Wimplicit-function-declaration]
75 | if ((stat("/sys/firmware/devicetree/base/ibm,partition-name", &buf) == 0) &&
| ^~~~
| strcat
Since pkey_util.c includes pkeys-helper.h, which in turn includes pkeys-powerpc.h,
stat.h including is missing for "struct stat". This is fixed by adding "sys/stat.h"
in pkeys-powerpc.h
Secondly,
pkey-powerpc.h:55:18: warning: format `%llx' expects argument of type `long long unsigned int', but argument 3 has type `u64' {aka `long unsigned int'} [-Wformat=]
55 | dprintf4("%s() changing %016llx to %016llx\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
56 | __func__, __read_pkey_reg(), pkey_reg);
| ~~~~~~~~~~~~~~~~~
| |
| u64 {aka long unsigned int}
pkey-helpers.h:63:32: note: in definition of macro `dprintf_level'
63 | sigsafe_printf(args); \
| ^~~~
These format specifier related warning are removed by adding
"__SANE_USERSPACE_TYPES__" to pkeys_utils.c.
Link: https://lkml.kernel.org/r/20250428131937.641989-1-nysal@linux.ibm.com
Fixes: 50910acd6f61 ("selftests/mm: use sys_pkey helpers consistently")
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current implementation of the guard region tests assume that /tmp is
mounted as tmpfs, that is shmem.
This isn't always the case, and at least one instance of a spurious test
failure has been reported as a result.
This assumption is unsafe, rushed and silly - and easily remedied by
simply using memfd, so do so.
We also have to fixup the readonly_file test to explicitly only be
applicable to file-backed cases.
Link: https://lkml.kernel.org/r/20250425162436.564002-1-lorenzo.stoakes@oracle.com
Fixes: 272f37d3e99a ("tools/selftests: expand all guard region tests to file-backed")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/linux-mm/a2d2766b-0ab4-437b-951a-8595a7506fe9@arm.com/
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When running mm selftest to verify mm patches, 'compaction_test' case
failed on an x86 server with 1TB memory. And the root cause is that it
has too much free memory than what the test supports.
The test case tries to allocate 100000 huge pages, which is about 200 GB
for that x86 server, and when it succeeds, it expects it's large than 1/3
of 80% of the free memory in system. This logic only works for platform
with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false
alarm for others.
Fix it by changing the fixed page number to self-adjustable number
according to the real number of free memory.
Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com
Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory")
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Acked-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@inux.alibaba.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When switching network namespaces with the bpf_redirect_peer helper, the
skb->mark and skb->tstamp fields are not zeroed out like they can be on
a typical netns switch. This patch clarifies that in the helper
description.
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/ccc86af26d43c5c0b776bcba2601b7479c0d46d0.1746460653.git.paul.chaignon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starting with Rust 1.87.0 (expected 2025-05-15), `objtool` may report:
rust/core.o: warning: objtool: _R..._4core9panicking9panic_fmt() falls
through to next function _R..._4core9panicking18panic_nounwind_fmt()
rust/core.o: warning: objtool: _R..._4core9panicking18panic_nounwind_fmt()
falls through to next function _R..._4core9panicking5panic()
The reason is that `rust_begin_unwind` is now mangled:
_R..._7___rustc17rust_begin_unwind
Thus add the mangled one to the list so that `objtool` knows it is
actually `noreturn`.
See commit 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Alternatively, we could remove the fixed one in `noreturn.h` and relax
this test to cover both, but it seems best to be strict as long as we can.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250502140237.1659624-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Perform a bulk resync of tools/arch/arm64/include/asm/sysreg.h.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Until recently, the kernel could unexpectedly discard SVE state for a
period after a KVM_RUN ioctl, when the guest did not execute any
FPSIMD/SVE/SME instructions. We fixed that issue in commit:
fbc7e61195e2 ("KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state")
Add a test which tries to provoke that issue by manipulating SVE state
before/after running a guest which does not execute any FPSIMD/SVE/SME
instructions. The test executes a handful of iterations to miminize
the risk that the issue is masked by preemption.
Signed-off--by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250417-kvm-selftest-sve-signal-v1-1-6330c2f3da0c@kernel.org
[maz: Restored MR's SoB, fixed commit message according to MR's write-up]
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Strings from the kernel are guaranteed to be null terminated and
ynl_attr_validate() checks for this. But it doesn't check if the string
has a len of 0, which would cause problems when trying to access
data[len - 1]. Fix this by checking that len is positive.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250503043050.861238-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the test result does not differentiate between the cases when
either one of the address families are configured or if both the address
families are configured. Ideally, the result should report if a
particular case was skipped.
./drivers/net/ping.py
TAP version 13
1..7
ok 1 ping.test_default_v4 # SKIP Test requires IPv4 connectivity
ok 2 ping.test_default_v6
ok 3 ping.test_xdp_generic_sb
ok 4 ping.test_xdp_generic_mb
ok 5 ping.test_xdp_native_sb
ok 6 ping.test_xdp_native_mb
ok 7 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:5 fail:0 xfail:0 xpass:0 skip:2 error:0
Fixes: 75cc19c8ff89 ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250503013518.1722913-4-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
