| Age | Commit message (Collapse) | Author |
|---|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A series of fixes for perf tooling:
- Make xyarray return the X/Y size correctly which fixes a crash in
the exit code.
- Fix the libc path in test so it works not only on Debian/Ubuntu
correctly
- Check for eBPF file existance and output a useful error message
instead of failing to compile a non existant file
- Make sure perf_hpp_fmt is not longer references before freeing it
- Use list_del_init() in the histogram code to prevent a crash when
the already deleted element is deleted again
- Remove the leftovers of the removed '-l' option
- Add reviewer entries to the MAINTAINERS file"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf test shell trace+probe_libc_inet_pton.sh: Be compatible with Debian/Ubuntu
perf xyarray: Fix wrong processing when closing evsel fd
perf buildid-list: Fix crash when processing PERF_RECORD_NAMESPACE
perf record: Fix documentation for a inexistent option '-l'
perf tools: Add long time reviewers to MAINTAINERS
perf tools: Check wether the eBPF file exists in event parsing
perf hists: Add extra integrity checks to fmt_free()
perf hists: Fix crash in perf_hpp__reset_output_field()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner:
"Plug a memory leak in the instruction decoder"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix memory leak in decode_instructions()
|
|
Pull networking fixes from David Miller:
"A little more than usual this time around. Been travelling, so that is
part of it.
Anyways, here are the highlights:
1) Deal with memcontrol races wrt. listener dismantle, from Eric
Dumazet.
2) Handle page allocation failures properly in nfp driver, from Jaku
Kicinski.
3) Fix memory leaks in macsec, from Sabrina Dubroca.
4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault.
5) Several fixes in bnxt_en driver, including preventing potential
NVRAM parameter corruption from Michael Chan.
6) Fix for KRACK attacks in wireless, from Johannes Berg.
7) rtnetlink event generation fixes from Xin Long.
8) Deadlock in mlxsw driver, from Ido Schimmel.
9) Disallow arithmetic operations on context pointers in bpf, from
Jakub Kicinski.
10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from
Xin Long.
11) Only TCP is supported for sockmap, make that explicit with a
check, from John Fastabend.
12) Fix IP options state races in DCCP and TCP, from Eric Dumazet.
13) Fix panic in packet_getsockopt(), also from Eric Dumazet.
14) Add missing locked in hv_sock layer, from Dexuan Cui.
15) Various aquantia bug fixes, including several statistics handling
cures. From Igor Russkikh et al.
16) Fix arithmetic overflow in devmap code, from John Fastabend.
17) Fix busted socket memory accounting when we get a fault in the tcp
zero copy paths. From Willem de Bruijn.
18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits)
stmmac: Don't access tx_q->dirty_tx before netif_tx_lock
ipv6: flowlabel: do not leave opt->tot_len with garbage
of_mdio: Fix broken PHY IRQ in case of probe deferral
textsearch: fix typos in library helpers
rxrpc: Don't release call mutex on error pointer
net: stmmac: Prevent infinite loop in get_rx_timestamp_status()
net: stmmac: Fix stmmac_get_rx_hwtstamp()
net: stmmac: Add missing call to dev_kfree_skb()
mlxsw: spectrum_router: Configure TIGCR on init
mlxsw: reg: Add Tunneling IPinIP General Configuration Register
net: ethtool: remove error check for legacy setting transceiver type
soreuseport: fix initialization race
net: bridge: fix returning of vlan range op errors
sock: correct sk_wmem_queued accounting on efault in tcp zerocopy
bpf: add test cases to bpf selftests to cover all access tests
bpf: fix pattern matches for direct packet access
bpf: fix off by one for range markings with L{T, E} patterns
bpf: devmap fix arithmetic overflow in bitmap_size calculation
net: aquantia: Bad udp rate on default interrupt coalescing
net: aquantia: Enable coalescing management via ethtool interface
...
|
|
Lets add test cases to cover really all possible direct packet
access tests for good/bad access cases so we keep tracking them.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The skb->mark field is a union with reserved_tailroom which is used
in the TCP code paths from stream memory allocation. Allowing SK_SKB
programs to set this field creates a conflict with future code
optimizations, such as "gifting" the skb to the egress path instead
of creating a new skb and doing a memcpy.
Because we do not have a released version of SK_SKB yet lets just
remove it for now. A more appropriate scratch pad to use at the
socket layer is dev_scratch, but lets add that in future kernels
when needed.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SK_SKB BPF programs are run from the socket/tcp context but early in
the stack before much of the TCP metadata is needed in tcp_skb_cb. So
we can use some unused fields to place BPF metadata needed for SK_SKB
programs when implementing the redirect function.
This allows us to drop the preempt disable logic. It does however
require an API change so sk_redirect_map() has been updated to
additionally provide ctx_ptr to skb. Note, we do however continue to
disable/enable preemption around actual BPF program running to account
for map updates.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only TCP sockets have been tested and at the moment the state change
callback only handles TCP sockets. This adds a check to ensure that
sockets actually being added are TCP sockets.
For net-next we can consider UDP support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When an error occurs before adding an allocated insn to the list, free
it before returning.
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/336da800bf6070eae11f4e0a3b9ca64c27658114.1508430423.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix crash in perf_hpp__reset_output_field() (Jiri Olsa)
- Fix eBPF file/vendor events ambiguity in event specification (Jiri Olsa)
- Fix closing evsel fd in 'perf stat' (Jin Yao)
- Make perf test shell trace+probe_libc_inet_pton.sh pass in Debian/Ubuntu (Li Zhijian)
- Fix 'perf buildid-list --with-hits' crash when processing PERF_RECORD_NAMESPACE (Namhyung Kim)
- Fix documentation for an inexistent option 'perf record -l' (Taeung Song)
- Add long time reviewers to MAINTAINERS (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit f1174f77b50c ("bpf/verifier: rework value tracking")
removed the crafty selection of which pointer types are
allowed to be modified. This is OK for most pointer types
since adjust_ptr_min_max_vals() will catch operations on
immutable pointers. One exception is PTR_TO_CTX which is
now allowed to be offseted freely.
The intent of aforementioned commit was to allow context
access via modified registers. The offset passed to
->is_valid_access() verifier callback has been adjusted
by the value of the variable offset.
What is missing, however, is taking the variable offset
into account when the context register is used. Or in terms
of the code adding the offset to the value passed to the
->convert_ctx_access() callback. This leads to the following
eBPF user code:
r1 += 68
r0 = *(u32 *)(r1 + 8)
exit
being translated to this in kernel space:
0: (07) r1 += 68
1: (61) r0 = *(u32 *)(r1 +180)
2: (95) exit
Offset 8 is corresponding to 180 in the kernel, but offset
76 is valid too. Verifier will "accept" access to offset
68+8=76 but then "convert" access to offset 8 as 180.
Effective access to offset 248 is beyond the kernel context.
(This is a __sk_buff example on a debug-heavy kernel -
packet mark is 8 -> 180, 76 would be data.)
Dereferencing the modified context pointer is not as easy
as dereferencing other types, because we have to translate
the access to reading a field in kernel structures which is
usually at a different offset and often of a different size.
To allow modifying the pointer we would have to make sure
that given eBPF instruction will always access the same
field or the fields accessed are "compatible" in terms of
offset and size...
Disallow dereferencing modified context pointers and add
to selftests the test case described here.
Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In debian/ubuntu, libc.so is located at a different place,
/lib/x86_64-linux-gnu/libc-2.23.so, so it outputs like this when testing:
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.040 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.040/0.040/0.040/0.000 ms
0.000 probe_libc:inet_pton:(7f0e2db741c0))
__GI___inet_pton (/lib/x86_64-linux-gnu/libc-2.23.so)
getaddrinfo (/lib/x86_64-linux-gnu/libc-2.23.so)
[0xffffa9d40f34ff4d] (/bin/ping)
Fix up the libc path to make sure this test works in more OSes.
Committer testing:
When this test fails one can use 'perf test -v', i.e. in verbose mode, where
it'll show the expected backtrace, so, after applying this test:
On Fedora 26:
# perf test -v ping
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 23322
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.058 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.058/0.058/0.058/0.000 ms
0.000 probe_libc:inet_pton:(7fe344310d80))
__GI___inet_pton (/usr/lib64/libc-2.25.so)
getaddrinfo (/usr/lib64/libc-2.25.so)
_init (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philip Li <philip.li@intel.com>
Link: http://lkml.kernel.org/r/1508315649-18836-1-git-send-email-lizhijian@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In current xyarray code, xyarray__max_x() returns max_y, and xyarray__max_y()
returns max_x.
It's confusing and for code logic it looks not correct.
Error happens when closing evsel fd. Let's see this scenario:
1. Allocate an fd (pseudo-code)
perf_evsel__alloc_fd(struct perf_evsel *evsel, int ncpus, int nthreads)
{
evsel->fd = xyarray__new(ncpus, nthreads, sizeof(int));
}
xyarray__new(int xlen, int ylen, size_t entry_size)
{
size_t row_size = ylen * entry_size;
struct xyarray *xy = zalloc(sizeof(*xy) + xlen * row_size);
xy->entry_size = entry_size;
xy->row_size = row_size;
xy->entries = xlen * ylen;
xy->max_x = xlen;
xy->max_y = ylen;
......
}
So max_x is ncpus, max_y is nthreads and row_size = nthreads * 4.
2. Use perf syscall and get the fd
int perf_evsel__open(struct perf_evsel *evsel, struct cpu_map *cpus,
struct thread_map *threads)
{
for (cpu = 0; cpu < cpus->nr; cpu++) {
for (thread = 0; thread < nthreads; thread++) {
int fd, group_fd;
fd = sys_perf_event_open(&evsel->attr, pid, cpus->map[cpu],
group_fd, flags);
FD(evsel, cpu, thread) = fd;
}
}
static inline void *xyarray__entry(struct xyarray *xy, int x, int y)
{
return &xy->contents[x * xy->row_size + y * xy->entry_size];
}
These codes don't have issues. The issue happens in the closing of fd.
3. Close fd.
void perf_evsel__close_fd(struct perf_evsel *evsel)
{
int cpu, thread;
for (cpu = 0; cpu < xyarray__max_x(evsel->fd); cpu++)
for (thread = 0; thread < xyarray__max_y(evsel->fd); ++thread) {
close(FD(evsel, cpu, thread));
FD(evsel, cpu, thread) = -1;
}
}
Since xyarray__max_x() returns max_y (nthreads) and xyarry__max_y()
returns max_x (ncpus), so above code is actually to be:
for (cpu = 0; cpu < nthreads; cpu++)
for (thread = 0; thread < ncpus; ++thread) {
close(FD(evsel, cpu, thread));
FD(evsel, cpu, thread) = -1;
}
It's not correct!
This change is introduced by "475fb533fb7d" ("perf evsel: Fix buffer overflow
while freeing events")
This fix is to let xyarray__max_x() return max_x (ncpus) and
let xyarry__max_y() return max_y (nthreads)
Committer note:
This was also fixed by Ravi Bangoria, who provided the same patch,
noticing the problem with 'perf record':
<quote Ravi>
I see 'perf record -p <pid>' crashes with following log:
*** Error in `./perf': free(): invalid next size (normal): 0x000000000298b340 ***
======= Backtrace: =========
/lib/x86_64-linux-gnu/libc.so.6(+0x777e5)[0x7f7fd85c87e5]
/lib/x86_64-linux-gnu/libc.so.6(+0x8037a)[0x7f7fd85d137a]
/lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f7fd85d553c]
./perf(perf_evsel__close+0xb4)[0x4b7614]
./perf(perf_evlist__delete+0x100)[0x4ab180]
./perf(cmd_record+0x1d9)[0x43a5a9]
./perf[0x49aa2f]
./perf(main+0x631)[0x427841]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f7fd8571830]
./perf(_start+0x29)[0x427a59]
</>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Fixes: d74be4767367 ("perf xyarray: Save max_x, max_y")
Link: http://lkml.kernel.org/r/1508339478-26674-1-git-send-email-yao.jin@linux.intel.com
Link: http://lkml.kernel.org/r/1508327446-15302-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This reverts commit c91fc8519d87715a3a173475ea3778794c139996.
That change caused a C6 and PC6 residency regression on large idle systems.
Users also complained about new output indicating jitter:
turbostat: cpu6 jitter 3794 9142
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: 4.13+ <stable@vger.kernel.org> # v4.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Thomas reported that 'perf buildid-list' gets a SEGFAULT due to NULL
pointer deref when he ran it on a data with namespace events. It was
because the buildid_id__mark_dso_hit_ops lacks the namespace event
handler and perf_too__fill_default() didn't set it.
Program received signal SIGSEGV, Segmentation fault.
0x0000000000000000 in ?? ()
Missing separate debuginfos, use: dnf debuginfo-install audit-libs-2.7.7-1.fc25.s390x bzip2-libs-1.0.6-21.fc25.s390x elfutils-libelf-0.169-1.fc25.s390x
+elfutils-libs-0.169-1.fc25.s390x libcap-ng-0.7.8-1.fc25.s390x numactl-libs-2.0.11-2.ibm.fc25.s390x openssl-libs-1.1.0e-1.1.ibm.fc25.s390x perl-libs-5.24.1-386.fc25.s390x
+python-libs-2.7.13-2.fc25.s390x slang-2.3.0-7.fc25.s390x xz-libs-5.2.3-2.fc25.s390x zlib-1.2.8-10.fc25.s390x
(gdb) where
#0 0x0000000000000000 in ?? ()
#1 0x00000000010fad6a in machines__deliver_event (machines=<optimized out>, machines@entry=0x2c6fd18,
evlist=<optimized out>, event=event@entry=0x3fffdf00470, sample=0x3ffffffe880, sample@entry=0x3ffffffe888,
tool=tool@entry=0x1312968 <build_id.mark_dso_hit_ops>, file_offset=1136) at util/session.c:1287
#2 0x00000000010fbf4e in perf_session__deliver_event (file_offset=1136, tool=0x1312968 <build_id.mark_dso_hit_ops>,
sample=0x3ffffffe888, event=0x3fffdf00470, session=0x2c6fc30) at util/session.c:1340
#3 perf_session__process_event (session=0x2c6fc30, session@entry=0x0, event=event@entry=0x3fffdf00470,
file_offset=file_offset@entry=1136) at util/session.c:1522
#4 0x00000000010fddde in __perf_session__process_events (file_size=11880, data_size=<optimized out>,
data_offset=<optimized out>, session=0x0) at util/session.c:1899
#5 perf_session__process_events (session=0x0, session@entry=0x2c6fc30) at util/session.c:1953
#6 0x000000000103b2ac in perf_session__list_build_ids (with_hits=<optimized out>, force=<optimized out>)
at builtin-buildid-list.c:83
#7 cmd_buildid_list (argc=<optimized out>, argv=<optimized out>) at builtin-buildid-list.c:115
#8 0x00000000010a026c in run_builtin (p=0x1311f78 <commands+24>, argc=argc@entry=2, argv=argv@entry=0x3fffffff3c0)
at perf.c:296
#9 0x000000000102bc00 in handle_internal_command (argv=<optimized out>, argc=2) at perf.c:348
#10 run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:392
#11 main (argc=<optimized out>, argv=0x3fffffff3c0) at perf.c:536
(gdb)
Fix it by adding a stub event handler for namespace event.
Committer testing:
Further clarifying, plain using 'perf buildid-list' will not end up in a
SEGFAULT when processing a perf.data file with namespace info:
# perf record -a --namespaces sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.024 MB perf.data (1058 samples) ]
# perf buildid-list | wc -l
38
# perf buildid-list | head -5
e2a171c7b905826fc8494f0711ba76ab6abbd604 /lib/modules/4.14.0-rc3+/build/vmlinux
874840a02d8f8a31cedd605d0b8653145472ced3 /lib/modules/4.14.0-rc3+/kernel/arch/x86/kvm/kvm-intel.ko
ea7223776730cd8a22f320040aae4d54312984bc /lib/modules/4.14.0-rc3+/kernel/drivers/gpu/drm/i915/i915.ko
5961535e6732a8edb7f22b3f148bb2fa2e0be4b9 /lib/modules/4.14.0-rc3+/kernel/drivers/gpu/drm/drm.ko
f045f54aa78cf1931cc893f78b6cbc52c72a8cb1 /usr/lib64/libc-2.25.so
#
It is only when one asks for checking what of those entries actually had
samples, i.e. when we use either -H or --with-hits, that we will process
all the PERF_RECORD_ events, and since tools/perf/builtin-buildid-list.c
neither explicitely set a perf_tool.namespaces() callback nor the
default stub was set that we end up, when processing a
PERF_RECORD_NAMESPACE record, causing a SEGFAULT:
# perf buildid-list -H
Segmentation fault (core dumped)
^C
#
Reported-and-Tested-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hari Bathini <hbathini@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Fixes: f3b3614a284d ("perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info")
Link: http://lkml.kernel.org/r/20171017132900.11043-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
'perf record' had a '-l' option that meant "scale counter values" a very
long time ago, but it currently belongs to 'perf stat' as '-c'. So
remove it. I found this problem in the below case.
$ perf record -e cycles -l sleep 3
Error: unknown switch `l
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1507907412-19813-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Some tooling fixes plus three kernel fixes: a memory leak fix, a
statistics fix and a crash fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix memory leaks on allocation failures
perf/core: Fix cgroup time when scheduling descendants
perf/core: Avoid freeing static PMU contexts when PMU is unregistered
tools include uapi bpf.h: Sync kernel ABI header with tooling header
perf pmu: Unbreak perf record for arm/arm64 with events with explicit PMU
perf script: Add missing separator for "-F ip,brstack" (and brstackoff)
perf callchain: Compare dsos (as well) for CCKEY_FUNCTION
|
|
I was stress testing some backports and with high load, after some time,
the latest version of the selftest showed some false positive in
connection with the uffdio_copy_retry. This seems to fix it while still
exercising -EEXIST in the background transfer once in a while.
The fork child will quit after the last UFFDIO_COPY is run, so a
repeated UFFDIO_COPY may not return -EEXIST. This change restricts the
-EEXIST stress to the background transfer where the memory can't go away
from under it.
Also updated uffdio_zeropage, so the interface is consistent.
Link: http://lkml.kernel.org/r/20171004171541.1495-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Adding the check wether the eBPF file exists, to consider it
as eBPF input file. This way we can differentiate eBPF events
from events that end up with same suffix as eBPF file.
Before:
$ perf stat -e 'cpu/uops_executed.core/' true
bpf: builtin compilation failed: -95, try external compiler
WARNING: unable to get correct kernel building directory.
Hint: Set correct kbuild directory using 'kbuild-dir' option in [llvm]
section of ~/.perfconfig or set it to "" to suppress kbuild
detection.
event syntax error: 'cpu/uops_executed.core/'
\___ Failed to load cpu/uops_executed.c from source: 'version' section incorrect or lost
After:
$ perf stat -e 'cpu/uops_executed.core/' true
Performance counter stats for 'true':
181,533 cpu/uops_executed.core/:u
0.002795447 seconds time elapsed
If user makes type in the eBPF file, we prioritize the event syntax
and show following warning:
$ perf stat -e 'krava.c//' true
event syntax error: 'krava.c//'
\___ Cannot find PMU `krava.c'. Missing kernel support?
Reported-and-Tested-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20171013083736.15037-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make sure the struct perf_hpp_fmt is properly unhooked before we free
it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20171013083736.15037-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Du Changbin reported crash [1] when calling perf_hpp__reset_output_field()
after unregistering field via perf_hpp__column_unregister().
This ends up in calling following list_del* sequence on
the same format:
perf_hpp__column_unregister:
list_del(&format->list);
perf_hpp__reset_output_field:
list_del_init(&fmt->list);
where the later list_del_init might touch already freed formats.
Fixing this by replacing list_del() with list_del_init() in
perf_hpp__column_unregister().
[1] http://marc.info/?l=linux-kernel&m=149059595826019&w=2
Reported-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20171013083736.15037-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- fix for x86: sysret_ss_attrs test build failure preventing the x86
tests from running
- fix mqueue: fix regression in silencing test run output
* tag 'linux-kselftest-4.14-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: mqueue: fix regression in silencing output from RUN_TESTS
selftests: x86: sysret_ss_attrs doesn't build on a PIE build
|
|
Silences the checker:
Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'
The 90caccdd8cc0 ("bpf: fix bpf_tail_call() x64 JIT") cset only updated
a comment in uapi/bpf.h.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rwx2cqbf0x1lwa1krsr6e6hd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently, perf record is broken on arm/arm64 systems when the PMU is
specified explicitly as part of the event, e.g.
$ ./perf record -e armv8_cortex_a53/cpu_cycles/u true
In such cases, perf record fails to open events unless
perf_event_paranoid is set to -1, even if the PMU in question supports
mode exclusion. Further, even when perf_event_paranoid is toggled, no
samples are recorded.
This is an unintended side effect of commit:
e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring)
... which assumes that if a PMU has an associated cpu_map, it is an
uncore PMU, and forces events for such PMUs to be system-wide.
This is not true for arm/arm64 systems, which can have heterogeneous
CPUs. To account for this, multiple CPU PMUs are exposed, each with a
"cpus" field under sysfs, which the perf tool parses into a cpu_map. ARM
PMUs do not have a "cpumask" file, and only have a "cpus" file. For the
gory details as to why, see commit:
7e3fcffe95544010 ("perf pmu: Support alternative sysfs cpumask")
Given all of this, we can instead identify uncore PMUs by explicitly
checking for a "cpumask" file, and restore arm/arm64 PMU support back to
a working state. This patch does so, adding a new perf_pmu::is_uncore
field, and splitting the existing cpumask parsing so that it can be
reused.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by Will Deacon <will.deacon@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: 4.12+ <stable@vger.kernel.org>
Fixes: e3ba76deef23064f ("perf tools: Force uncore events to system wide monitoring)
Link: http://lkml.kernel.org/r/1507315102-5942-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Prior to commit 55b9b50811ca ("perf script: Support -F brstack,dso and
brstacksym,dso"), we were printing a space before the brstack data. It
seems that this space was important. Without it, parsing is difficult.
Very sorry for the mistake.
Notice here how the "ip" and "brstack" run together:
$ perf script -F ip,brstack | head -n 1
22e18c40x22e19e2/0x22e190b/P/-/-/0 0x22e19a1/0x22e19d0/P/-/-/0 0x22e195d/0x22e1990/P/-/-/0 0x22e18e9/0x22e1943/P/-/-/0 0x22e1a69/0x22e18c0/P/-/-/0 0x22e19f7/0x22e1a20/P/-/-/0 0x22e1910/0x22e19ee/P/-/-/0 0x22e19e2/0x22e190b/P/-/-/0 0x22e19a1/0x22e19d0/P/-/-/0 0x22e195d/0x22e1990/P/-/-/0 0x22e18e9/0x22e1943/P/-/-/0 0x22e1a69/0x22e18c0/P/-/-/0 0x22e19f7/0x22e1a20/P/-/-/0 0x22e1910/0x22e19ee/P/-/-/0 0x22e19e2/0x22e190b/P/-/-/0 0x22e19a1/0x22e19d0/P/-/-/0
After this diff, sanity is restored:
$ perf script -F ip,brstack | head -n 1
22e18c4 0x22e19e2/0x22e190b/P/-/-/0 0x22e19a1/0x22e19d0/P/-/-/0 0x22e195d/0x22e1990/P/-/-/0 0x22e18e9/0x22e1943/P/-/-/0 0x22e1a69/0x22e18c0/P/-/-/0 0x22e19f7/0x22e1a20/P/-/-/0 0x22e1910/0x22e19ee/P/-/-/0 0x22e19e2/0x22e190b/P/-/-/0 0x22e19a1/0x22e19d0/P/-/-/0 0x22e195d/0x22e1990/P/-/-/0 0x22e18e9/0x22e1943/P/-/-/0 0x22e1a69/0x22e18c0/P/-/-/0 0x22e19f7/0x22e1a20/P/-/-/0 0x22e1910/0x22e19ee/P/-/-/0 0x22e19e2/0x22e190b/P/-/-/0 0x22e19a1/0x22e19d0/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: 4.13+ <stable@vger.kernel.org>
Fixes: 55b9b50811ca ("perf script: Support -F brstack,dso and brstacksym,dso")
Link: http://lkml.kernel.org/r/20171006080722.3442046-1-marksan@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The > should be >= so that we don't write one element beyond the end of
the array.
Fixes: 16e781224198 ("selftests/net: Add a test to validate behavior of rx timestamps")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fix from Arnaldo Carvalho de Melo:
- Two functions from different binaries can have the same start address. Thus,
comparing only the start address in match_chain() leads to inconsistent
callchains. Fix this by adding a check for DSOs as well (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Fix fix regression in silencing output from RUN_TESTS introduced by
commit <8230b905a6780c6> selftests: mqueue: Use full path to run tests
from Makefile
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
sysret_ss_attrs fails to compile leading x86 test run to fail on systems
configured to build using PIE by default. Add -no-pie fix it.
Relocation might still fail if relocated above 4G. For now this change
fixes the build and runs x86 tests.
tools/testing/selftests/x86$ make
gcc -m64 -o .../tools/testing/selftests/x86/single_step_syscall_64 -O2
-g -std=gnu99 -pthread -Wall single_step_syscall.c -lrt -ldl
gcc -m64 -o .../tools/testing/selftests/x86/sysret_ss_attrs_64 -O2 -g
-std=gnu99 -pthread -Wall sysret_ss_attrs.c thunks.S -lrt -ldl
/usr/bin/ld: /tmp/ccS6pvIh.o: relocation R_X86_64_32S against `.text'
can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: final link failed: Nonrepresentable section on output
collect2: error: ld returned 1 exit status
Makefile:49: recipe for target
'.../tools/testing/selftests/x86/sysret_ss_attrs_64' failed
make: *** [.../tools/testing/selftests/x86/sysret_ss_attrs_64] Error 1
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
Two functions from different binaries can have same start address. Thus,
comparing only start address in match_chain() leads to inconsistent
callchains. Fix this by adding a check for dsos as well.
Ex, https://www.spinics.net/lists/linux-perf-users/msg04067.html
Reported-by: Alexander Pozdneev <pozdneyev@gmail.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: zhangmengting@huawei.com
Link: http://lkml.kernel.org/r/20171005091234.5874-1-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
- Prevent a division by zero in the perf aux buffer handling
- Sync kernel headers with perf tool headers
- Fix a build failure in the syscalltbl code
- Make the debug messages of perf report --call-graph work correctly
- Make sure that all required perf files are in the MANIFEST for
container builds
- Fix the atrr.exclude kernel handling so it respects the
perf_event_paranoid and the user permissions
- Make perf test on s390x work correctly
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Only update ->aux_wakeup in non-overwrite mode
perf test: Fix vmlinux failure on s390x part 2
perf test: Fix vmlinux failure on s390x
perf tools: Fix syscalltbl build failure
perf report: Fix debug messages with --call-graph option
perf evsel: Fix attr.exclude_kernel setting for default cycles:p
tools include: Sync kernel ABI headers with tooling headers
perf tools: Get all of tools/{arch,include}/ in the MANIFEST
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix syscalltbl build failure (Akemi Yagi)
- Fix attr.exclude_kernel setting for default cycles:p, this time for
!root with kernel.perf_event_paranoid = -1 (Arnaldo Carvalho de Melo)
- Sync kernel ABI headers with tooling headers (Ingo Molnar)
- Remove misleading debug messages with --call-graph option (Mengting Zhang)
- Revert vmlinux symbol resolution patches for s390x (Thomas Richter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
On s390x perf test 1 failed. It turned out that commit cf6383f73cf2
("perf report: Fix kernel symbol adjustment for s390x") was incorrect.
The previous implementation in dso__load_sym() is also suitable for
s390x.
Therefore this patch undoes commit cf6383f73cf2
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Fixes: cf6383f73cf2 ("perf report: Fix kernel symbol adjustment for s390x")
LPU-Reference: 20170915071404.58398-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-v101o8k25vuja2ogosgf15yy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On s390x perf test 1 failed. It turned out that commit 4a084ecfc821
("perf report: Fix module symbol adjustment for s390x") was incorrect.
The previous implementation in dso__load_sym() is also suitable for
s390x.
Therefore this patch undoes commit 4a084ecfc821.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
Fixes: 4a084ecfc821 ("perf report: Fix module symbol adjustment for s390x")
LPU-Reference: 20170915071404.58398-1-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-5ani7ly57zji7s0hmzkx416l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Arnd Bergmann reported a bunch of warnings like:
crypto/jitterentropy.o: warning: objtool: jent_fold_time()+0x3b: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_stuck()+0x1d: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_unbiased_bit()+0x15: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_read_entropy()+0x32: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_entropy_collector_free()+0x19: call without frame pointer save/setup
and
arch/x86/events/core.o: warning: objtool: collect_events uses BP as a scratch register
arch/x86/events/core.o: warning: objtool: events_ht_sysfs_show()+0x22: call without frame pointer save/setup
With certain rare configurations, GCC sometimes sets up the frame
pointer with:
lea (%rsp),%rbp
instead of:
mov %rsp,%rbp
The instructions are equivalent, so treat the former like the latter.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a468af8b28a69b83fffc6d7668be9b6fcc873699.1506526584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This update consists of:
- fixes to several existing tests
- a test for regression introduced by b9470c27607b ("inet: kill
smallest_size and smallest_port")
- seccomp support for glibc 2.26 siginfo_t.h
- fixes to kselftest framework and tests to run make O=dir use-case
- fixes to silence unnecessary test output to de-clutter test results"
* tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
selftests: timers: set-timer-lat: Fix hang when testing unsupported alarms
selftests: timers: set-timer-lat: fix hang when std out/err are redirected
selftests/memfd: correct run_tests.sh permission
selftests/seccomp: Support glibc 2.26 siginfo_t.h
selftests: futex: Makefile: fix for loops in targets to run silently
selftests: Makefile: fix for loops in targets to run silently
selftests: mqueue: Use full path to run tests from Makefile
selftests: futex: copy sub-dir test scripts for make O=dir run
selftests: lib.mk: copy test scripts and test files for make O=dir run
selftests: sync: kselftest and kselftest-clean fail for make O=dir case
selftests: sync: use TEST_CUSTOM_PROGS instead of TEST_PROGS
selftests: lib.mk: add TEST_CUSTOM_PROGS to allow custom test run/install
selftests: watchdog: fix to use TEST_GEN_PROGS and remove clean
selftests: lib.mk: fix test executable status check to use full path
selftests: Makefile: clear LDFLAGS for make O=dir use-case
selftests: lib.mk: kselftest and kselftest-clean fail for make O=dir case
Makefile: kselftest and kselftest-clean fail for make O=dir case
selftests/net: msg_zerocopy enable build with older kernel headers
selftests: actually run the various net selftests
selftest: add a reuseaddr test
...
|
|
When timer_create() fails on a bootime or realtime clock, setup_timer()
returns 0 as if timer has been set. Callers wait forever for the timer
to expire.
This hang is seen on a system that doesn't have support for:
CLOCK_REALTIME_ALARM ABSTIME missing CAP_WAKE_ALARM? : [UNSUPPORTED]
Test hangs waiting for a timer that hasn't been set to expire. Fix
setup_timer() to return 1, add handling in callers to detect the
unsupported case and return 0 without waiting to not fail the test.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
do_timer_oneshot() uses select() as a timer with FD_SETSIZE and readfs
is cleared with FD_ZERO without FD_SET.
When stdout and stderr are redirected, the test hangs in select forever.
Fix the problem calling select() with readfds empty and nfds zero. This
is sufficient for using select() for timer.
With this fix "./set-timer-lat > /dev/null 2>&1" no longer hangs.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
to fix the following issue:
------------------
TAP version 13
selftests: run_tests.sh
========================================
selftests: Warning: file run_tests.sh is not executable, correct this.
not ok 1..1 selftests: run_tests.sh [FAIL]
------------------
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
The 2.26 release of glibc changed how siginfo_t is defined, and the earlier
work-around to using the kernel definition are no longer needed. The old
way needs to stay around for a while, though.
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
Fix for loops in targets to run silently to avoid cluttering the test
results.
Suppresses the following from targets:
for DIR in functional; do \
BUILD_TARGET=./tools/testing/selftests/futex/$DIR; \
mkdir $BUILD_TARGET -p; \
make OUTPUT=$BUILD_TARGET -C $DIR all;\
done
./tools/testing/selftests/futex/run.sh
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
Fix for loops in targets to run silently to avoid cluttering the test
results.
Suppresses the following from targets: e.g run from breakpoints
for TARGET in breakpoints; do \
BUILD_TARGET=$BUILD/$TARGET; \
mkdir $BUILD_TARGET -p; \
make OUTPUT=$BUILD_TARGET -C $TARGET;\
done;
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
Use full path including $(OUTPUT) to run tests from Makefile for
normal case when objects reside in the source tree as well as when
objects are relocated with make O=dir. In both cases $(OUTPUT) will
be set correctly by lib.mk.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
For make O=dir run_tests to work, test scripts from sub-directories
need to be copied over to the object directory. Running tests from the
object directory is necessary to avoid making the source tree dirty.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
|
|
The build of kernel v4.14-rc1 for i686 fails on RHEL 6 with the error
in tools/perf:
util/syscalltbl.c:157: error: expected ';', ',' or ')' before '__maybe_unused'
mv: cannot stat `util/.syscalltbl.o.tmp': No such file or directory
Fix it by placing/moving:
#include <linux/compiler.h>
outside of #ifdef HAVE_SYSCALL_TABLE block.
Signed-off-by: Akemi Yagi <toracat@elrepo.org>
Cc: Alan Bartlett <ajb@elrepo.org>
Link: http://lkml.kernel.org/r/oq41r8$1v9$1@blaine.gmane.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With --call-graph option, perf report can display call chains using
type, min percent threshold, optional print limit and order. And the
default call-graph parameter is 'graph,0.5,caller,function,percent'.
Before this patch, 'perf report --call-graph' shows incorrect debug
messages as below:
# perf report --call-graph
Invalid callchain mode: 0.5
Invalid callchain order: 0.5
Invalid callchain sort key: 0.5
Invalid callchain config key: 0.5
Invalid callchain mode: caller
Invalid callchain mode: function
Invalid callchain order: function
Invalid callchain mode: percent
Invalid callchain order: percent
Invalid callchain sort key: percent
That is because in function __parse_callchain_report_opt(),each field of
the call-graph parameter is passed to parse_callchain_{mode,order,
sort_key,value} in turn until it meets the matching value.
For example, the order field "caller" is passed to
parse_callchain_mode() firstly and obviously it doesn't match any mode
field. Therefore parse_callchain_mode() will shows the debug message
"Invalid callchain mode: caller", which could confuse users.
The patch fixes this issue by moving the warning out of the function
parse_callchain_{mode,order,sort_key,value}.
Signed-off-by: Mengting Zhang <zhangmengting@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Li Bin <huawei.libin@huawei.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1506154694-39691-1-git-send-email-zhangmengting@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Yet another fix for probing the max attr.precise_ip setting: it is not
enough settting attr.exclude_kernel for !root users, as they _can_
profile the kernel if the kernel.perf_event_paranoid sysctl is set to
-1, so check that as well.
Testing it:
As non root:
$ sysctl kernel.perf_event_paranoid
kernel.perf_event_paranoid = 2
$ perf record sleep 1
$ perf evlist -v
cycles:uppp: ..., exclude_kernel: 1, ... precise_ip: 3, ...
Now as non-root, but with kernel.perf_event_paranoid set set to the
most permissive value, -1:
$ sysctl kernel.perf_event_paranoid
kernel.perf_event_paranoid = -1
$ perf record sleep 1
$ perf evlist -v
cycles:ppp: ..., exclude_kernel: 0, ... precise_ip: 3, ...
$
I.e. non-root, default kernel.perf_event_paranoid: :uppp modifier = not allowed to sample the kernel,
non-root, most permissible kernel.perf_event_paranoid: :ppp = allowed to sample the kernel.
In both cases, use the highest available precision: attr.precise_ip = 3.
Reported-and-Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: d37a36979077 ("perf evsel: Fix attr.exclude_kernel setting for default cycles:p")
Link: http://lkml.kernel.org/n/tip-nj2qkf75xsd6pw6hhjzfqqdx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Time for a sync with ABI/uapi headers with the upcoming v4.14 kernel.
None of the ABI changes require any source code level changes to our
existing in-kernel tooling code:
- tools/arch/s390/include/uapi/asm/kvm.h:
New KVM_S390_VM_TOD_EXT ABI, not used by in-kernel tooling.
- tools/arch/x86/include/asm/cpufeatures.h:
tools/arch/x86/include/asm/disabled-features.h:
New PCID, SME and VGIF x86 CPU feature bits defined.
- tools/include/asm-generic/hugetlb_encode.h:
tools/include/uapi/asm-generic/mman-common.h:
tools/include/uapi/linux/mman.h:
Two new madvise() flags, plus a hugetlb system call mmap flags
restructuring/extension changes.
- tools/include/uapi/drm/drm.h:
tools/include/uapi/drm/i915_drm.h:
New drm_syncobj_create flags definitions, new drm_syncobj_wait
and drm_syncobj_array ABIs. DRM_I915_PERF_* calls and a new
I915_PARAM_HAS_EXEC_FENCE_ARRAY ABI for the Intel driver.
- tools/include/uapi/linux/bpf.h:
New bpf_sock fields (::mark and ::priority), new XDP_REDIRECT
action, new kvm_ppc_smmu_info fields (::data_keys, instr_keys)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170913073823.lxmi4c7ejqlfabjx@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now that I'm switching the container builds from using a local volume
pointing to the kernel repository with the perf sources, instead getting
a detached tarball to be able to use a container cluster, some places
broke because I forgot to put some of the required files in
tools/perf/MANIFEST, namely some bitsperlong.h files.
So, to fix it do the same as for tools/build/ and pack the whole
tools/arch/ directory.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wmenpjfjsobwdnfde30qqncj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Another round of CR3/PCID related fixes (I think this addresses all
but one of the known problems with PCID support), an objtool fix plus
a Clang fix that (finally) solves all Clang quirks to build a bootable
x86 kernel as-is"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Fix inline asm call constraints for Clang
objtool: Handle another GCC stack pointer adjustment bug
x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUs
x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlier
x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware code
x86/mm: Factor out CR3-building code
|
