| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)
- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)
Freescale i.MX6 PCIe controller driver:
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
fsl,lx2160ar2-pcie (Frank Li)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean
Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
Xilinx XDMA PCIe controller driver:
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
binding and xilinx-dma-pl driver (Thippeswamy Havalige)
Miscellaneous:
- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)
- Fix minor kerneldoc issues and typos (Bjorn Helgaas)
- Use PCI_DEVID() macro in aer_inject() instead of open-coding it
(Jinjie Ruan)
- Check pcie_find_root_port() return in x86 fixups to avoid NULL
pointer dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and
pci_vpd_release() (Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
- Remove unused BILLION macro (zhang jiao)"
* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
PCI: Fix typos
dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
tools: PCI: Remove unused BILLION macro
tools: PCI: Remove .*.cmd files with make clean
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
dt-bindings: PCI: altera: msi: Convert to YAML
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
...
|
|
Pull nfsd updates from Chuck Lever:
"Notable features of this release include:
- Pre-requisites for automatically determining the RPC server thread
count
- Clean-up and preparation for supporting LOCALIO, which will be
merged via the NFS client tree
- Enhancements and fixes to NFSv4.2 COPY offload
- A new Python-based tool for generating kernel SunRPC XDR encoding
and decoding functions, added as an aid for prototyping features in
protocols based on the Linux kernel's SunRPC implementation
As always I am grateful to the NFSD contributors, reviewers, testers,
and bug reporters who participated during this cycle"
* tag 'nfsd-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (57 commits)
xdrgen: Prevent reordering of encoder and decoder functions
xdrgen: typedefs should use the built-in string and opaque functions
xdrgen: Fix return code checking in built-in XDR decoders
tools: Add xdrgen
nfsd: fix delegation_blocked() to block correctly for at least 30 seconds
nfsd: fix initial getattr on write delegation
nfsd: untangle code in nfsd4_deleg_getattr_conflict()
nfsd: enforce upper limit for namelen in __cld_pipe_inprogress_downcall()
nfsd: return -EINVAL when namelen is 0
NFSD: Wrap async copy operations with trace points
NFSD: Clean up extra whitespace in trace_nfsd_copy_done
NFSD: Record the callback stateid in copy tracepoints
NFSD: Display copy stateids with conventional print formatting
NFSD: Limit the number of concurrent async COPY operations
NFSD: Async COPY result needs to return a write verifier
nfsd: avoid races with wake_up_var()
nfsd: use clear_and_wake_up_bit()
sunrpc: xprtrdma: Use ERR_CAST() to return
NFSD: Annotate struct pnfs_block_deviceaddr with __counted_by()
nfsd: call cache_put if xdr_reserve_space returns NULL
...
|
|
As discussed during the distro-centric session within the sched_ext
Microconference at LPC 2024, introduce a sequence counter that is
incremented every time a BPF scheduler is loaded.
This feature can help distributions in diagnosing potential performance
regressions by identifying systems where users are running (or have ran)
custom BPF schedulers.
Example:
arighi@virtme-ng~> cat /sys/kernel/sched_ext/enable_seq
0
arighi@virtme-ng~> sudo scx_simple
local=1 global=0
^CEXIT: unregistered from user space
arighi@virtme-ng~> cat /sys/kernel/sched_ext/enable_seq
1
In this way user-space tools (such as Ubuntu's apport and similar) are
able to gather and include this information in bug reports.
Cc: Giovanni Gherdovich <giovanni.gherdovich@suse.com>
Cc: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Cc: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Cc: Phil Auld <pauld@redhat.com>
Signed-off-by: Andrea Righi <andrea.righi@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Similar to commit f8d92fc527ff ("selftests: vDSO: fix include order in
build of test_vdso_chacha") add SYM_DATA_START, SYM_DATA_START_LOCAL, and
SYM_DATA_END stubs to tools/include/linux/linkage.h so that the proper
macros can be used within the kernel's vdso code as well as in the
vdso_test_chacha selftest.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add SPDX identifier to the gitignore. Remove the comment and .i file
since the file it references was removed in another patch. This patch
depends on Min-Hua Chen's 'pm: cpupower: rename raw_pylibcpupower.i'.
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer updates from Steven Rostedt:
- tracing/ring-buffer: persistent buffer across reboots
This allows for the tracing instance ring buffer to stay persistent
across reboots. The way this is done is by adding to the kernel
command line:
trace_instance=boot_map@0x285400000:12M
This will reserve 12 megabytes at the address 0x285400000, and then
map the tracing instance "boot_map" ring buffer to that memory. This
will appear as a normal instance in the tracefs system:
/sys/kernel/tracing/instances/boot_map
A user could enable tracing in that instance, and on reboot or kernel
crash, if the memory is not wiped by the firmware, it will recreate
the trace in that instance. For example, if one was debugging a
shutdown of a kernel reboot:
# cd /sys/kernel/tracing
# echo function > instances/boot_map/current_tracer
# reboot
[..]
# cd /sys/kernel/tracing
# tail instances/boot_map/trace
swapper/0-1 [000] d..1. 164.549800: restore_boot_irq_mode <-native_machine_shutdown
swapper/0-1 [000] d..1. 164.549801: native_restore_boot_irq_mode <-native_machine_shutdown
swapper/0-1 [000] d..1. 164.549802: disconnect_bsp_APIC <-native_machine_shutdown
swapper/0-1 [000] d..1. 164.549811: hpet_disable <-native_machine_shutdown
swapper/0-1 [000] d..1. 164.549812: iommu_shutdown_noop <-native_machine_restart
swapper/0-1 [000] d..1. 164.549813: native_machine_emergency_restart <-__do_sys_reboot
swapper/0-1 [000] d..1. 164.549813: tboot_shutdown <-native_machine_emergency_restart
swapper/0-1 [000] d..1. 164.549820: acpi_reboot <-native_machine_emergency_restart
swapper/0-1 [000] d..1. 164.549821: acpi_reset <-acpi_reboot
swapper/0-1 [000] d..1. 164.549822: acpi_os_write_port <-acpi_reboot
On reboot, the buffer is examined to make sure it is valid. The
validation check even steps through every event to make sure the meta
data of the event is correct. If any test fails, it will simply reset
the buffer, and the buffer will be empty on boot.
- Allow the tracing persistent boot buffer to use the "reserve_mem"
option
Instead of having the admin find a physical address to store the
persistent buffer, which can be very tedious if they have to
administrate several different machines, allow them to use the
"reserve_mem" option that will find a location for them. It is not as
reliable because of KASLR, as the loading of the kernel in different
locations can cause the memory allocated to be inconsistent. Booting
with "nokaslr" can make reserve_mem more reliable.
- Have function graph tracer handle offsets from a previous boot.
The ring buffer output from a previous boot may have different
addresses due to kaslr. Have the function graph tracer handle these
by using the delta from the previous boot to the new boot address
space.
- Only reset the saved meta offset when the buffer is started or reset
In the persistent memory meta data, it holds the previous address
space information, so that it can calculate the delta to have
function tracing work. But this gets updated after being read to hold
the new address space. But if the buffer isn't used for that boot, on
reboot, the delta is now calculated from the previous boot and not
the boot that holds the data in the ring buffer. This causes the
functions not to be shown. Do not save the address space information
of the current kernel until it is being recorded.
- Add a magic variable to test the valid meta data
Add a magic variable in the meta data that can also be used for
validation. The validator of the previous buffer doesn't need this
magic data, but it can be used if the meta data is changed by a new
kernel, which may have the same format that passes the validator but
is used differently. This magic number can also be used as a
"versioning" of the meta data.
- Align user space mapped ring buffer sub buffers to improve TLB
entries
Linus mentioned that the mapped ring buffer sub buffers were
misaligned between the meta page and the sub-buffers, so that if the
sub-buffers were bigger than PAGE_SIZE, it wouldn't allow the TLB to
use bigger entries.
- Add new kernel command line "traceoff" to disable tracing on boot for
instances
If tracing is enabled for a boot instance, there needs a way to be
able to disable it on boot so that new events do not get entered into
the ring buffer and be mixed with events from a previous boot, as
that can be confusing.
- Allow trace_printk() to go to other instances
Currently, trace_printk() can only go to the top level instance. When
debugging with a persistent buffer, it is really useful to be able to
add trace_printk() to go to that buffer, so that you have access to
them after a crash.
- Do not use "bin_printk()" for traces to a boot instance
The bin_printk() saves only a pointer to the printk format in the
ring buffer, as the reader of the buffer can still have access to it.
But this is not the case if the buffer is from a previous boot. If
the trace_printk() is going to a "persistent" buffer, it will use the
slower version that writes the printk format into the buffer.
- Add command line option to allow trace_printk() to go to an instance
Allow the kernel command line to define which instance the
trace_printk() goes to, instead of forcing the admin to set it for
every boot via the tracefs options.
- Start a document that explains how to use tracefs to debug the kernel
- Add some more kernel selftests to test user mapped ring buffer
* tag 'trace-ring-buffer-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (28 commits)
selftests/ring-buffer: Handle meta-page bigger than the system
selftests/ring-buffer: Verify the entire meta-page padding
tracing/Documentation: Start a document on how to debug with tracing
tracing: Add option to set an instance to be the trace_printk destination
tracing: Have trace_printk not use binary prints if boot buffer
tracing: Allow trace_printk() to go to other instance buffers
tracing: Add "traceoff" flag to boot time tracing instances
ring-buffer: Align meta-page to sub-buffers for improved TLB usage
ring-buffer: Add magic and struct size to boot up meta data
ring-buffer: Don't reset persistent ring-buffer meta saved addresses
tracing/fgraph: Have fgraph handle previous boot function addresses
tracing: Allow boot instances to use reserve_mem boot memory
tracing: Fix ifdef of snapshots to not prevent last_boot_info file
ring-buffer: Use vma_pages() helper function
tracing: Fix NULL vs IS_ERR() check in enable_instances()
tracing: Add last boot delta offset for stack traces
tracing: Update function tracing output for previous boot buffer
tracing: Handle old buffer mappings for event strings and functions
tracing/ring-buffer: Add last_boot_info file to boot instance
ring-buffer: Save text and data locations in mapped meta data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Add notification of build warnings for all tests
Currently, the build will only fail on warnings if the ktest config
file states that it should fail or if the compile is done with
'-Werror'. This has allowed warnings to sneak in if it doesn't fail.
Add a notification at the end of the test that will state that
warnings were found in the build so that the developer will be aware
of it.
- Fix the grub2 parser to not return the wrong kernel index
ktest.pl can read the grub.cfg file to know what kernel to boot to
via grub-reboot. This requires knowing the index that the kernel is
referenced by in the grub.cfg file. Some distros have logic to
determine the menuentry that can cause the ktest.pl to come up with
the wrong index and boot the wrong kernel.
* tag 'ktest-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Avoid false positives with grub2 skip regex
ktest.pl: Always warn on build warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Use BPF + BTF to collect and pretty print syscall and tracepoint
arguments in 'perf trace', done as an GSoC activity
- Data-type profiling improvements:
- Cache debuginfo to speed up data type resolution
- Add the 'typecln' sort order, to show which cacheline in a target
is hot or cold. The following shows members in the cfs_rq's first
cache line:
$ perf report -s type,typecln,typeoff -H
...
- 2.67% struct cfs_rq
+ 1.23% struct cfs_rq: cache-line 2
+ 0.57% struct cfs_rq: cache-line 4
+ 0.46% struct cfs_rq: cache-line 6
- 0.41% struct cfs_rq: cache-line 0
0.39% struct cfs_rq +0x14 (h_nr_running)
0.02% struct cfs_rq +0x38 (tasks_timeline.rb_leftmost)
- When a typedef resolves to a unnamed struct, use the typedef name
- When a struct has just one basic type field (int, etc), resolve
the type sort order to the name of the struct, not the type of
the field
- Support type folding/unfolding in the data-type annotation TUI
- Fix bitfields offsets and sizes
- Initial support for PowerPC, using libcapstone and the usual
objdump disassembly parsing routines
- Add support for disassembling and addr2line using the LLVM libraries,
speeding up those operations
- Support --addr2line option in 'perf script' as with other tools
- Intel branch counters (LBR event logging) support, only available in
recent Intel processors, for instance, the new "brcntr" field can be
asked from 'perf script' to print the information collected from this
feature:
$ perf script -F +brstackinsn,+brcntr
# Branch counter abbr list:
# branch-instructions:ppp = A
# branch-misses = B
# '-' No event occurs
# '+' Event occurrences may be lost due to branch counter saturated
tchain_edit 332203 3366329.405674: 53030 branch-instructions:ppp: 401781 f3+0x2c (home/sdp/test/tchain_edit)
f3+31:
0000000000401774 insn: eb 04 br_cntr: AA # PRED 5 cycles [5]
000000000040177a insn: 81 7d fc 0f 27 00 00
0000000000401781 insn: 7e e3 br_cntr: A # PRED 1 cycles [6] 2.00 IPC
0000000000401766 insn: 8b 45 fc
0000000000401769 insn: 83 e0 01
000000000040176c insn: 85 c0
000000000040176e insn: 74 06 br_cntr: A # PRED 1 cycles [7] 4.00 IPC
0000000000401776 insn: 83 45 fc 01
000000000040177a insn: 81 7d fc 0f 27 00 00
0000000000401781 insn: 7e e3 br_cntr: A # PRED 7 cycles [14] 0.43 IPC
- Support Timed PEBS (Precise Event-Based Sampling), a recent hardware
feature in Intel processors
- Add 'perf ftrace profile' subcommand, using ftrace's function-graph
tracer so that users can see the total, average, max execution time
as well as the number of invocations easily, for instance:
$ sudo perf ftrace profile -G __x64_sys_perf_event_open -- \
perf stat -e cycles -C1 true 2> /dev/null | head
# Total (us) Avg (us) Max (us) Count Function
65.611 65.611 65.611 1 __x64_sys_perf_event_open
30.527 30.527 30.527 1 anon_inode_getfile
30.260 30.260 30.260 1 __anon_inode_getfile
29.700 29.700 29.700 1 alloc_file_pseudo
17.578 17.578 17.578 1 d_alloc_pseudo
17.382 17.382 17.382 1 __d_alloc
16.738 16.738 16.738 1 kmem_cache_alloc_lru
15.686 15.686 15.686 1 perf_event_alloc
14.012 7.006 11.264 2 obj_cgroup_charge
- 'perf sched timehist' improvements, including the addition of
priority showing/filtering command line options
- Varios improvements to the 'perf probe', including 'perf test'
regression testings
- Introduce the 'perf check', initially to check if some feature is
in place, using it in 'perf test'
- Various fixes for 32-bit systems
- Address more leak sanitizer failures
- Fix memory leaks (LBR, disasm lock ops, etc)
- More reference counting fixes (branch_info, etc)
- Constify 'struct perf_tool' parameters to improve code generation
and reduce the chances of having its internals changed, which isn't
expected
- More constifications in various other places
- Add more build tests, including for JEVENTS
- Add more 'perf test' entries ('perf record LBR', pipe/inject,
--setup-filter, 'perf ftrace', 'cgroup sampling', etc)
- Inject build ids for all entries in a call chain in 'perf inject',
not just for the main sample
- Improve the BPF based sample filter, allowing root to setup filters
in bpffs that then can be used by non-root users
- Allow filtering by cgroups with the BPF based sample filter
- Allow a more compact way for 'perf mem report' using the
-T/--type-profile and also provide a --sort option similar to the one
in 'perf report', 'perf top', to setup the sort order manually
- Fix --group behavior in 'perf annotate' when leader has no samples,
where it was not showing anything even when other events in the group
had samples
- Fix spinlock and rwlock accounting in 'perf lock contention'
- Fix libsubcmd fixdep Makefile dependencies
- Improve 'perf ftrace' error message when ftrace isn't available
- Update various Intel JSON vendor event files
- ARM64 CoreSight hardware tracing infrastructure improvements, mostly
not visible to users
- Update power10 JSON events
* tag 'perf-tools-for-v6.12-1-2024-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (310 commits)
perf trace: Mark the 'head' arg in the set_robust_list syscall as coming from user space
perf trace: Mark the 'rseq' arg in the rseq syscall as coming from user space
perf env: Find correct branch counter info on hybrid
perf evlist: Print hint for group
tools: Drop nonsensical -O6
perf pmu: To info add event_type_desc
perf evsel: Add accessor for tool_event
perf pmus: Fake PMU clean up
perf list: Avoid potential out of bounds memory read
perf help: Fix a typo ("bellow")
perf ftrace: Detect whether ftrace is enabled on system
perf test shell probe_vfs_getname: Remove extraneous '=' from probe line number regex
perf build: Require at least clang 16.0.6 to build BPF skeletons
perf trace: If a syscall arg is marked as 'const', assume it is coming _from_ userspace
perf parse-events: Remove duplicated include in parse-events.c
perf callchain: Allow symbols to be optional when resolving a callchain
perf inject: Lazy build-id mmap2 event insertion
perf inject: Add new mmap2-buildid-all option
perf inject: Fix build ID injection
perf annotate-data: Add pr_debug_scope()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext support from Tejun Heo:
"This implements a new scheduler class called ‘ext_sched_class’, or
sched_ext, which allows scheduling policies to be implemented as BPF
programs.
The goals of this are:
- Ease of experimentation and exploration: Enabling rapid iteration
of new scheduling policies.
- Customization: Building application-specific schedulers which
implement policies that are not applicable to general-purpose
schedulers.
- Rapid scheduler deployments: Non-disruptive swap outs of scheduling
policies in production environments"
See individual commits for more documentation, but also the cover letter
for the latest series:
Link: https://lore.kernel.org/all/20240618212056.2833381-1-tj@kernel.org/
* tag 'sched_ext-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (110 commits)
sched: Move update_other_load_avgs() to kernel/sched/pelt.c
sched_ext: Don't trigger ops.quiescent/runnable() on migrations
sched_ext: Synchronize bypass state changes with rq lock
scx_qmap: Implement highpri boosting
sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()
sched_ext: Compact struct bpf_iter_scx_dsq_kern
sched_ext: Replace consume_local_task() with move_local_task_to_local_dsq()
sched_ext: Move consume_local_task() upward
sched_ext: Move sanity check and dsq_mod_nr() into task_unlink_from_dsq()
sched_ext: Reorder args for consume_local/remote_task()
sched_ext: Restructure dispatch_to_local_dsq()
sched_ext: Fix processs_ddsp_deferred_locals() by unifying DTL_INVALID handling
sched_ext: Make find_dsq_for_dispatch() handle SCX_DSQ_LOCAL_ON
sched_ext: Refactor consume_remote_task()
sched_ext: Rename scx_kfunc_set_sleepable to unlocked and relocate
sched_ext: Add missing static to scx_dump_data
sched_ext: Add missing static to scx_has_op[]
sched_ext: Temporarily work around pick_task_scx() being called without balance_scx()
sched_ext: Add a cgroup scheduler which uses flattened hierarchy
sched_ext: Add cgroup support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Introduce '__attribute__((bpf_fastcall))' for helpers and kfuncs with
corresponding support in LLVM.
It is similar to existing 'no_caller_saved_registers' attribute in
GCC/LLVM with a provision for backward compatibility. It allows
compilers generate more efficient BPF code assuming the verifier or
JITs will inline or partially inline a helper/kfunc with such
attribute. bpf_cast_to_kern_ctx, bpf_rdonly_cast,
bpf_get_smp_processor_id are the first set of such helpers.
- Harden and extend ELF build ID parsing logic.
When called from sleepable context the relevants parts of ELF file
will be read to find and fetch .note.gnu.build-id information. Also
harden the logic to avoid TOCTOU, overflow, out-of-bounds problems.
- Improvements and fixes for sched-ext:
- Allow passing BPF iterators as kfunc arguments
- Make the pointer returned from iter_next method trusted
- Fix x86 JIT convergence issue due to growing/shrinking conditional
jumps in variable length encoding
- BPF_LSM related:
- Introduce few VFS kfuncs and consolidate them in
fs/bpf_fs_kfuncs.c
- Enforce correct range of return values from certain LSM hooks
- Disallow attaching to other LSM hooks
- Prerequisite work for upcoming Qdisc in BPF:
- Allow kptrs in program provided structs
- Support for gen_epilogue in verifier_ops
- Important fixes:
- Fix uprobe multi pid filter check
- Fix bpf_strtol and bpf_strtoul helpers
- Track equal scalars history on per-instruction level
- Fix tailcall hierarchy on x86 and arm64
- Fix signed division overflow to prevent INT_MIN/-1 trap on x86
- Fix get kernel stack in BPF progs attached to tracepoint:syscall
- Selftests:
- Add uprobe bench/stress tool
- Generate file dependencies to drastically improve re-build time
- Match JIT-ed and BPF asm with __xlated/__jited keywords
- Convert older tests to test_progs framework
- Add support for RISC-V
- Few fixes when BPF programs are compiled with GCC-BPF backend
(support for GCC-BPF in BPF CI is ongoing in parallel)
- Add traffic monitor
- Enable cross compile and musl libc
* tag 'bpf-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (260 commits)
btf: require pahole 1.21+ for DEBUG_INFO_BTF with default DWARF version
btf: move pahole check in scripts/link-vmlinux.sh to lib/Kconfig.debug
btf: remove redundant CONFIG_BPF test in scripts/link-vmlinux.sh
bpf: Call the missed kfree() when there is no special field in btf
bpf: Call the missed btf_record_free() when map creation fails
selftests/bpf: Add a test case to write mtu result into .rodata
selftests/bpf: Add a test case to write strtol result into .rodata
selftests/bpf: Rename ARG_PTR_TO_LONG test description
selftests/bpf: Fix ARG_PTR_TO_LONG {half-,}uninitialized test
bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error
bpf: Improve check_raw_mode_ok test for MEM_UNINIT-tagged types
bpf: Fix helper writes to read-only maps
bpf: Remove truncation test in bpf_strtol and bpf_strtoul helpers
bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit
selftests/bpf: Add tests for sdiv/smod overflow cases
bpf: Fix a sdiv overflow issue
libbpf: Add bpf_object__token_fd accessor
docs/bpf: Add missing BPF program types to docs
docs/bpf: Add constant values for linkages
bpf: Use fake pt_regs when doing bpf syscall tracepoint tracing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
|
|
I noticed that "xdrgen source" reorders the procedure encoder and
decoder functions every time it is run. I would prefer that the
generated code be more deterministic: it enables a reader to better
see exactly what has changed between runs of the tool.
The problem is that Python sets are not ordered. I use a Python set
to ensure that, when multiple procedures use a particular argument or
result type, the encoder/decoder for that type is emitted only once.
Sets aren't ordered, but I can use Python dictionaries for this
purpose to ensure the procedure functions are always emitted in the
same order if the .x file does not change.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
'typedef opaque yada<XYZ>' should use xdrgen's built-in opaque
encoder and decoder, to enable better compiler optimization.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
xdr_stream_encode_u32() returns XDR_UNIT on success.
xdr_stream_decode_u32() returns zero or -EMSGSIZE, but never
XDR_UNIT.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add a Python-based tool for translating XDR specifications into XDR
encoder and decoder functions written in the Linux kernel's C coding
style. The generator attempts to match the usual C coding style of
the Linux kernel's SunRPC consumers.
This approach is similar to the netlink code generator in
tools/net/ynl .
The maintainability benefits of machine-generated XDR code include:
- Stronger type checking
- Reduces the number of bugs introduced by human error
- Makes the XDR code easier to audit and analyze
- Enables rapid prototyping of new RPC-based protocols
- Hardens the layering between protocol logic and marshaling
- Makes it easier to add observability on demand
- Unit tests might be built for both the tool and (automatically)
for the generated code
In addition, converting the XDR layer to use memory-safe languages
such as Rust will be easier if much of the code can be converted
automatically.
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Charlie Jenkins <charlie@rivosinc.com> says:
Add support for riscv specific barrier implementations to the tools
tree, so that fence instructions can be emitted for synchronization.
* b4-shazam-merge:
tools: Optimize ring buffer for riscv
tools: Add riscv barrier implementation
Link: https://lore.kernel.org/r/20240806-optimize_ring_buffer_read_riscv-v2-0-ca7e193ae198@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Now that the riscv tools tree supports optimized barriers, use them in
the ring buffer.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240806-optimize_ring_buffer_read_riscv-v2-2-ca7e193ae198@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Many of the other architectures use their custom barrier implementations.
Use the barrier code from the kernel sources to optimize barriers in
tools.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240806-optimize_ring_buffer_read_riscv-v2-1-ca7e193ae198@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- New HID over SPI driver for Goodix devices that don't follow
Microsoft's HID-over-SPI specification, so a separate driver is
needed. Currently supported device is GT7986U touchscreen (Charles
Wang)
- support for new hardware features in Wacom driver (high-res wheel
scrolling, touchstrings with relative motions, support for two
touchrings) (Jason Gerecke)
- support for customized vendor firmware loading in intel-ish driver
(Zhang Lixu)
- fix for theoretical race condition in i2c-hid (Dmitry Torokhov)
- support for HIDIOCREVOKE -- evdev's EVIOCREVOKE equivalent in hidraw
(Peter Hutterer)
- initial hidraw selftest implementation (Benjamin Tissoires)
- constification of device-specific report descriptors (Thomas
Weißschuh)
- other small assorted fixes and device ID / quirk additions
* tag 'hid-for-linus-2024091602' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (54 commits)
hid: cp2112: Use irq_get_trigger_type() helper
HID: i2c-hid: ensure various commands do not interfere with each other
HID: multitouch: Add support for Thinkpad X12 Gen 2 Kbd Portfolio
HID: wacom: Do not warn about dropped packets for first packet
HID: wacom: Support sequence numbers smaller than 16-bit
HID: lg: constify fixed up report descriptor
HID: uclogic: constify fixed up report descriptor
HID: waltop: constify fixed up report descriptor
HID: sony: constify fixed up report descriptor
HID: pxrc: constify fixed up report descriptor
HID: steelseries: constify fixed up report descriptor
HID: viewsonic: constify fixed up report descriptor
HID: vrc2: constify fixed up report descriptor
HID: xiaomi: constify fixed up report descriptor
HID: maltron: constify fixed up report descriptor
HID: keytouch: constify fixed up report descriptor
HID: holtek-kbd: constify fixed up report descriptor
HID: dr: constify fixed up report descriptor
HID: bigbenff: constify fixed up report descriptor
HID: picoLCD: Use backlight power constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Just updates and fixes, no major changes"
* tag 'tpmdd-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: export tpm2_sessions_init() to fix ibmvtpm building
tpm: Drop explicit initialization of struct i2c_device_id::driver_data to 0
selftests: tpm2: test_smoke: Run only when TPM2 is avaialable.
MAINTAINERS: Add selftest files to TPM section
tpm: Clean up TPM space after command failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Drop duplicate devices in trivial-devices.yaml
- Add a common serial peripheral device schema and reference it in
serial device schemas.
- Convert nxp,lpc1850-wdt, zii,rave-wdt, ti,davinci-wdt,
snps,archs-pct, fsl,bcsr, fsl,fpga-qixis-i2c, fsl,fpga-qixis,
fsl,cpm-enet, fsl,cpm-mdio, fsl,ucc-hdlc, maxim,ds26522,
aspeed,ast2400-cvic, aspeed,ast2400-vic, fsl,ftm-timer,
ti,davinci-timer, fsl,rcpm, and qcom,ebi2 to DT schema
- Add support for rockchip,rk3576-wdt, qcom,apss-wdt-sa8255p,
fsl,imx8qm-irqsteer, qcom,pm6150-vib, qcom,sa8255p-pdc,
isil,isl69260, ti,tps546d24, and lpc32xx DMA mux
- Drop duplicate nvidia,tegra186-ccplex-cluster.yaml and
mediatek,mt6795-sys-clock.yaml
- Add arm,gic ESPI and EPPI interrupt type specifiers
- Add another batch of legacy compatible strings which we have no
intention of documenting
- Add dmas/dma-names properties to FSL lcdif
- Fix wakeup-source reference to m8921-keypad.yaml
- Treewide fixes of typos in bindings
DT Core:
- Update dtc/libfdt to upstream version v1.7.0-95-gbcd02b523429
- More conversions to scoped iterators and __free() initializer
- Handle overflows in address resources on 32-bit systems
- Extend extracting compatible strings in sources from function
parameters
- Use of_property_present() in DT unittest
- Clean-up of_irq_to_resource() to use helpers
- Support #msi-cells=<0> in of_msi_get_domain()
- Improve the kerneldoc for of_property_match_string()
- kselftest: Ignore nodes that have ancestors disabled"
* tag 'devicetree-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (59 commits)
dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
dt-bindings: cpu: Drop duplicate nvidia,tegra186-ccplex-cluster.yaml
dt-bindings: clock: mediatek: Drop duplicate mediatek,mt6795-sys-clock.yaml
of/irq: Use helper to define resources
of/irq: Make use of irq_get_trigger_type()
dt-bindings: clk: vc5: Make SD/OE pin configuration properties not required
drivers/of: Improve documentation for match_string
of: property: Do some clean up with use of __free()
dt-bindings: watchdog: qcom-wdt: document support on SA8255p
dt-bindings: interrupt-controller: fsl,irqsteer: Document fsl,imx8qm-irqsteer
dt-bindings: interrupt-controller: arm,gic: add ESPI and EPPI specifiers
dt-bindings: dma: Add lpc32xx DMA mux binding
dt-bindings: trivial-devices: Drop duplicate "maxim,max1237"
dt-bindings: trivial-devices: Drop duplicate LM75 compatible devices
dt-bindings: trivial-devices: Deprecate "ad,ad7414"
dt-bindings: trivial-devices: Drop incorrect and duplicate at24 compatibles
dt-bindings: wakeup-source: update reference to m8921-keypad.yaml
dt-bindings: interrupt-controller: qcom-pdc: document support for SA8255p
dt-bindings: Fix various typos
of: address: Unify resource bounds overflow checking
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- Optimize boot time by concurrent execution of hv_synic_init()
(Saurabh Sengar)
- Use helpers to read control registers in hv_snp_boot_ap() (Yosry
Ahmed)
- Add memory allocation check in hv_fcopy_start (Zhu Jun)
* tag 'hyperv-next-signed-20240916' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
tools/hv: Add memory allocation check in hv_fcopy_start
x86/hyperv: use helpers to read control registers in hv_snp_boot_ap()
Drivers: hv: vmbus: Optimize boot time by concurrent execution of hv_synic_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Reduce alignment constraints on STRICT_KERNEL_RWX and speed-up TLB
misses on 8xx and 603
- Replace kretprobe code with rethook and enable fprobe
- Remove the "fast endian switch" syscall
- Handle DLPAR device tree updates in kernel, allowing the deprecation
of the binary /proc/powerpc/ofdt interface
Thanks to Abhishek Dubey, Alex Shi, Benjamin Gray, Christophe Leroy,
Gaosheng Cui, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari
Bathini, Huang Xiaojia, Jinjie Ruan, Madhavan Srinivasan, Miguel Ojeda,
Mina Almasry, Narayana Murty N, Naveen Rao, Rob Herring (Arm), Scott
Cheloha, Segher Boessenkool, Stephen Rothwell, Thomas Zimmermann, Uwe
Kleine-König, Vaibhav Jain, and Zhang Zekun.
* tag 'powerpc-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (59 commits)
powerpc/atomic: Use YZ constraints for DS-form instructions
MAINTAINERS: powerpc: Add Maddy
powerpc: Switch back to struct platform_driver::remove()
powerpc/pseries/eeh: Fix pseries_eeh_err_inject
selftests/powerpc: Allow building without static libc
macintosh/via-pmu: register_pmu_pm_ops() can be __init
powerpc: Stop using no_llseek
powerpc/64s: Remove the "fast endian switch" syscall
powerpc/mm/64s: Restrict THP to Radix or HPT w/64K pages
powerpc/mm/64s: Move THP reqs into a separate symbol
powerpc/64s: Make mmu_hash_ops __ro_after_init
powerpc: Replace kretprobe code with rethook on powerpc
powerpc: pseries: Constify struct kobj_type
powerpc: powernv: Constify struct kobj_type
powerpc: Constify struct kobj_type
powerpc/pseries/dlpar: Add device tree nodes for DLPAR IO add
powerpc/pseries/dlpar: Remove device tree node for DLPAR IO remove
powerpc/pseries: Use correct data types from pseries_hp_errorlog struct
powerpc/vdso: Inconditionally use CFUNC macro
powerpc/32: Implement validation of emergency stack
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"Originally I'd planned on sending each of the vDSO getrandom()
architecture ports to their respective arch trees. But as we started
to work on this, we found lots of interesting issues in the shared
code and infrastructure, the fixes for which the various archs needed
to base their work.
So in the end, this turned into a nice collaborative effort fixing up
issues and porting to 5 new architectures -- arm64, powerpc64,
powerpc32, s390x, and loongarch64 -- with everybody pitching in and
commenting on each other's code. It was a fun development cycle.
This contains:
- Numerous fixups to the vDSO selftest infrastructure, getting it
running successfully on more platforms, and fixing bugs in it.
- Additions to the vDSO getrandom & chacha selftests. Basically every
time manual review unearthed a bug in a revision of an arch patch,
or an ambiguity, the tests were augmented.
By the time the last arch was submitted for review, s390x, v1 of
the series was essentially fine right out of the gate.
- Fixes to the the generic C implementation of vDSO getrandom, to
build and run successfully on all archs, decoupling it from
assumptions we had (unintentionally) made on x86_64 that didn't
carry through to the other architectures.
- Port of vDSO getrandom to LoongArch64, from Xi Ruoyao and acked by
Huacai Chen.
- Port of vDSO getrandom to ARM64, from Adhemerval Zanella and acked
by Will Deacon.
- Port of vDSO getrandom to PowerPC, in both 32-bit and 64-bit
varieties, from Christophe Leroy and acked by Michael Ellerman.
- Port of vDSO getrandom to S390X from Heiko Carstens, the arch
maintainer.
While it'd be natural for there to be things to fix up over the course
of the development cycle, these patches got a decent amount of review
from a fairly diverse crew of folks on the mailing lists, and, for the
most part, they've been cooking in linux-next, which has been helpful
for ironing out build issues.
In terms of architectures, I think that mostly takes care of the
important 64-bit archs with hardware still being produced and running
production loads in settings where vDSO getrandom is likely to help.
Arguably there's still RISC-V left, and we'll see for 6.13 whether
they find it useful and submit a port"
* tag 'random-6.12-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (47 commits)
selftests: vDSO: check cpu caps before running chacha test
s390/vdso: Wire up getrandom() vdso implementation
s390/vdso: Move vdso symbol handling to separate header file
s390/vdso: Allow alternatives in vdso code
s390/module: Provide find_section() helper
s390/facility: Let test_facility() generate static branch if possible
s390/alternatives: Remove ALT_FACILITY_EARLY
s390/facility: Disable compile time optimization for decompressor code
selftests: vDSO: fix vdso_config for s390
selftests: vDSO: fix ELF hash table entry size for s390x
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO64
powerpc/vdso: Wire up getrandom() vDSO implementation on VDSO32
powerpc/vdso: Refactor CFLAGS for CVDSO build
powerpc/vdso32: Add crtsavres
mm: Define VM_DROPPABLE for powerpc/32
powerpc/vdso: Fix VDSO data access when running in a non-root time namespace
selftests: vDSO: don't include generated headers for chacha test
arm64: vDSO: Wire up getrandom() vDSO implementation
arm64: alternative: make alternative_has_cap_likely() VDSO compatible
selftests: vDSO: also test counter in vdso_test_chacha
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Implement per-PMU context rescheduling to significantly improve
single-PMU performance, and related cleanups/fixes (Peter Zijlstra
and Namhyung Kim)
- Fix ancient bug resulting in a lot of events being dropped
erroneously at higher sampling frequencies (Luo Gengkun)
- uprobes enhancements:
- Implement RCU-protected hot path optimizations for better
performance:
"For baseline vs SRCU, peak througput increased from 3.7 M/s
(million uprobe triggerings per second) up to about 8 M/s. For
uretprobes it's a bit more modest with bump from 2.4 M/s to
5 M/s.
For SRCU vs RCU Tasks Trace, peak throughput for uprobes
increases further from 8 M/s to 10.3 M/s (+28%!), and for
uretprobes from 5.3 M/s to 5.8 M/s (+11%), as we have more
work to do on uretprobes side.
Even single-thread (no contention) performance is slightly
better: 3.276 M/s to 3.396 M/s (+3.5%) for uprobes, and 2.055
M/s to 2.174 M/s (+5.8%) for uretprobes."
(Andrii Nakryiko et al)
- Document mmap_lock, don't abuse get_user_pages_remote() (Oleg
Nesterov)
- Cleanups & fixes to prepare for future work:
- Remove uprobe_register_refctr()
- Simplify error handling for alloc_uprobe()
- Make uprobe_register() return struct uprobe *
- Fold __uprobe_unregister() into uprobe_unregister()
- Shift put_uprobe() from delete_uprobe() to uprobe_unregister()
- BPF: Fix use-after-free in bpf_uprobe_multi_link_attach()
(Oleg Nesterov)
- New feature & ABI extension: allow events to use PERF_SAMPLE READ
with inheritance, enabling sample based profiling of a group of
counters over a hierarchy of processes or threads (Ben Gainey)
- Intel uncore & power events updates:
- Add Arrow Lake and Lunar Lake support
- Add PERF_EV_CAP_READ_SCOPE
- Clean up and enhance cpumask and hotplug support
(Kan Liang)
- Add LNL uncore iMC freerunning support
- Use D0:F0 as a default device
(Zhenyu Wang)
- Intel PT: fix AUX snapshot handling race (Adrian Hunter)
- Misc fixes and cleanups (James Clark, Jiri Olsa, Oleg Nesterov and
Peter Zijlstra)
* tag 'perf-core-2024-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
dmaengine: idxd: Clean up cpumask and hotplug for perfmon
iommu/vt-d: Clean up cpumask and hotplug for perfmon
perf/x86/intel/cstate: Clean up cpumask and hotplug
perf: Add PERF_EV_CAP_READ_SCOPE
perf: Generic hotplug support for a PMU with a scope
uprobes: perform lockless SRCU-protected uprobes_tree lookup
rbtree: provide rb_find_rcu() / rb_find_add_rcu()
perf/uprobe: split uprobe_unregister()
uprobes: travers uprobe's consumer list locklessly under SRCU protection
uprobes: get rid of enum uprobe_filter_ctx in uprobe filter callbacks
uprobes: protected uprobe lifetime with SRCU
uprobes: revamp uprobe refcounting and lifetime management
bpf: Fix use-after-free in bpf_uprobe_multi_link_attach()
perf/core: Fix small negative period being ignored
perf: Really fix event_function_call() locking
perf: Optimize __pmu_ctx_sched_out()
perf: Add context time freeze
perf: Fix event_function_call() locking
perf: Extract a few helpers
perf: Optimize context reschedule for single PMU cases
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Core GPIOLIB:
- provide and add users for a macro allowing to iterate over accepted
GPIO property names of consumer device nodes
- remove legacy definitions that are no longer used
- put legacy GPIO devres helpers together with the rest of the
deprecated code
- implement and use swnode_gpio_get_reference(): a wrapper
simplifying the underlying calls to
fwnode_property_get_reference_args()
- use IS_ERR_OR_NULL() where it makes sense
- replace of_find_property() with of_property_present()
- simplify code with the scoped variant of OF-node children iterator
Documentation:
- update GPIO kerneldocs with Return sections
- fix "Excess struct member description" warnings now being triggered
with W=1
New drivers:
- add support for Analog Devices ADP5585
Driver improvements:
- add support for wake-on-GPIO to gpio-mpc8xxx
- use GPIO_LOOKUP_IDX() in gpio-virtuser
- use devm_clk_get_[optional_]enabled() where applicable in several
drivers
- replace OF-specific functions with provider-agnostic alternatives
where possible
- drop support for legacy platform data from gpio-ath79 and
gpio-davinci
- refactor gpio-stmpe
- improve error reporting in gpio-pca953x
- add support for reading the direction of pins for some models to
gpio-vf610
DT bindings:
- convert the bindings for nxp,lpc3220 to YAML
- add gpio-reserved-ranges to gpio-davinci
- simplify the GPIO hog schema
- fix a GPIO hog issue in bindings for fcs,fxl6408
Other:
- fix format specifiers in user-space tools
- remove leftover files on make clean in tools/gpio/"
* tag 'gpio-updates-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (54 commits)
gpio: mpc8xxx: switch to using DEFINE_RUNTIME_DEV_PM_OPS()
gpio: xilinx: Use helper function devm_clk_get_optional_enabled()
gpio: mb86s7x: Use helper function devm_clk_get_optional_enabled()
gpio: lpc18xx: Use helper function devm_clk_get_enabled()
gpio: cadence: Use helper function devm_clk_get_enabled()
gpio: sama5d2-piobu: convert comma to semicolon
gpio: mpc8xxx: order headers alphabetically
gpio: davinci: use devm_clk_get_enabled()
gpio: davinci: drop platform data support
gpio: stmpe: Sort headers
gpio: stmpe: Make use of device properties
gpio: stmpe: Utilise temporary variable for struct device
gpio: stmpe: Remove unused 'dev' member of struct stmpe_gpio
gpio: stmpe: Fix IRQ related error messages
gpio: pch: kerneldoc fixes for excess members
gpio: zynq: Simplify using devm_clk_get_enabled()
gpio: mpc8xxx: Add wake on GPIO support
gpio: syscon: fix excess struct member build warning
gpio: stp-xway: Simplify using devm_clk_get_enabled()
gpiolib: legacy: Consolidate devm_gpio_*() with other legacy APIs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull memory model doc updates from Paul McKenney:
"lkmm: Add documentation and mailing list
This contains documentation updates from Andrea Parri and Akira
Yokosawa. Also, there is now an lkmm@lists.linux.dev, and Boqun Feng's
update adds this to the LKMM MAINTAINERS entry.
Not included are a couple of more commits from Puranjay Mohan adding
more atomic operations to LKMM, but these await a herdtools7 release
that includes tool-side support for this functionality. With luck, I
will send a separate pull request for these later in the merge window"
* tag 'lkmm.2024.09.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
MAINTAINERS: Add the dedicated maillist info for LKMM
docs/memory-barriers.txt: Remove left-over references to "CACHE COHERENCY"
tools/memory-model: simple.txt: Fix stale reference to recipes-pairs.txt
tools/memory-model: Add locking.txt and glossary.txt to README
tools/memory-model: Document herd7 (abstract) representation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Neeraj Upadhyay:
"Context tracking:
- rename context tracking state related symbols and remove references
to "dynticks" in various context tracking state variables and
related helpers
- force context_tracking_enabled_this_cpu() to be inlined to avoid
leaving a noinstr section
CSD lock:
- enhance CSD-lock diagnostic reports
- add an API to provide an indication of ongoing CSD-lock stall
nocb:
- update and simplify RCU nocb code to handle (de-)offloading of
callbacks only for offline CPUs
- fix RT throttling hrtimer being armed from offline CPU
rcutorture:
- remove redundant rcu_torture_ops get_gp_completed fields
- add SRCU ->same_gp_state and ->get_comp_state functions
- add generic test for NUM_ACTIVE_*RCU_POLL* for testing RCU and SRCU
polled grace periods
- add CFcommon.arch for arch-specific Kconfig options
- print number of update types in rcu_torture_write_types()
- add rcutree.nohz_full_patience_delay testing to the TREE07 scenario
- add a stall_cpu_repeat module parameter to test repeated CPU stalls
- add argument to limit number of CPUs a guest OS can use in
torture.sh
rcustall:
- abbreviate RCU CPU stall warnings during CSD-lock stalls
- Allow dump_cpu_task() to be called without disabling preemption
- defer printing stall-warning backtrace when holding rcu_node lock
srcu:
- make SRCU gp seq wrap-around faster
- add KCSAN checks for concurrent updates to ->srcu_n_exp_nodelay and
->reschedule_count which are used in heuristics governing
auto-expediting of normal SRCU grace periods and
grace-period-state-machine delays
- mark idle SRCU-barrier callbacks to help identify stuck
SRCU-barrier callback
rcu tasks:
- remove RCU Tasks Rude asynchronous APIs as they are no longer used
- stop testing RCU Tasks Rude asynchronous APIs
- fix access to non-existent percpu regions
- check processor-ID assumptions during chosen CPU calculation for
callback enqueuing
- update description of rtp->tasks_gp_seq grace-period sequence
number
- add rcu_barrier_cb_is_done() to identify whether a given
rcu_barrier callback is stuck
- mark idle Tasks-RCU-barrier callbacks
- add *torture_stats_print() functions to print detailed diagnostics
for Tasks-RCU variants
- capture start time of rcu_barrier_tasks*() operation to help
distinguish a hung barrier operation from a long series of barrier
operations
refscale:
- add a TINY scenario to support tests of Tiny RCU and Tiny
SRCU
- optimize process_durations() operation
rcuscale:
- dump stacks of stalled rcu_scale_writer() instances and
grace-period statistics when rcu_scale_writer() stalls
- mark idle RCU-barrier callbacks to identify stuck RCU-barrier
callbacks
- print detailed grace-period and barrier diagnostics on
rcu_scale_writer() hangs for Tasks-RCU variants
- warn if async module parameter is specified for RCU implementations
that do not have async primitives such as RCU Tasks Rude
- make all writer tasks report upon hang
- tolerate repeated GFP_KERNEL failure in rcu_scale_writer()
- use special allocator for rcu_scale_writer()
- NULL out top-level pointers to heap memory to avoid double-free
bugs on modprobe failures
- maintain per-task instead of per-CPU callbacks count to avoid any
issues with migration of either tasks or callbacks
- constify struct ref_scale_ops
Fixes:
- use system_unbound_wq for kfree_rcu work to avoid disturbing
isolated CPUs
Misc:
- warn on unexpected rcu_state.srs_done_tail state
- better define "atomic" for list_replace_rcu() and
hlist_replace_rcu() routines
- annotate struct kvfree_rcu_bulk_data with __counted_by()"
* tag 'rcu.release.v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (90 commits)
rcu: Defer printing stall-warning backtrace when holding rcu_node lock
rcu/nocb: Remove superfluous memory barrier after bypass enqueue
rcu/nocb: Conditionally wake up rcuo if not already waiting on GP
rcu/nocb: Fix RT throttling hrtimer armed from offline CPU
rcu/nocb: Simplify (de-)offloading state machine
context_tracking: Tag context_tracking_enabled_this_cpu() __always_inline
context_tracking, rcu: Rename rcu_dyntick trace event into rcu_watching
rcu: Update stray documentation references to rcu_dynticks_eqs_{enter, exit}()
rcu: Rename rcu_momentary_dyntick_idle() into rcu_momentary_eqs()
rcu: Rename rcu_implicit_dynticks_qs() into rcu_watching_snap_recheck()
rcu: Rename dyntick_save_progress_counter() into rcu_watching_snap_save()
rcu: Rename struct rcu_data .exp_dynticks_snap into .exp_watching_snap
rcu: Rename struct rcu_data .dynticks_snap into .watching_snap
rcu: Rename rcu_dynticks_zero_in_eqs() into rcu_watching_zero_in_eqs()
rcu: Rename rcu_dynticks_in_eqs_since() into rcu_watching_snap_stopped_since()
rcu: Rename rcu_dynticks_in_eqs() into rcu_watching_snap_in_eqs()
rcu: Rename rcu_dynticks_eqs_online() into rcu_watching_online()
context_tracking, rcu: Rename rcu_dynticks_curr_cpu_in_eqs() into rcu_is_watching_curr_cpu()
context_tracking, rcu: Rename rcu_dynticks_task*() into rcu_task*()
refscale: Constify struct ref_scale_ops
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset isolation improvements
- cpuset cgroup1 support is split into its own file behind the new
config option CONFIG_CPUSET_V1. This makes it the second controller
which makes cgroup1 support optional after memcg
- Handling of unavailable v1 controller handling improved during
cgroup1 mount operations
- union_find applied to cpuset. It makes code simpler and more
efficient
- Reduce spurious events in pids.events
- Cleanups and other misc changes
- Contains a merge of cgroup/for-6.11-fixes to receive cpuset fixes
that further changes build upon
* tag 'cgroup-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (34 commits)
cgroup: Do not report unavailable v1 controllers in /proc/cgroups
cgroup: Disallow mounting v1 hierarchies without controller implementation
cgroup/cpuset: Expose cpuset filesystem with cpuset v1 only
cgroup/cpuset: Move cpu.h include to cpuset-internal.h
cgroup/cpuset: add sefltest for cpuset v1
cgroup/cpuset: guard cpuset-v1 code under CONFIG_CPUSETS_V1
cgroup/cpuset: rename functions shared between v1 and v2
cgroup/cpuset: move v1 interfaces to cpuset-v1.c
cgroup/cpuset: move validate_change_legacy to cpuset-v1.c
cgroup/cpuset: move legacy hotplug update to cpuset-v1.c
cgroup/cpuset: add callback_lock helper
cgroup/cpuset: move memory_spread to cpuset-v1.c
cgroup/cpuset: move relax_domain_level to cpuset-v1.c
cgroup/cpuset: move memory_pressure to cpuset-v1.c
cgroup/cpuset: move common code to cpuset-internal.h
cgroup/cpuset: introduce cpuset-v1.c
selftest/cgroup: Make test_cpuset_prs.sh deal with pre-isolated CPUs
cgroup/cpuset: Account for boot time isolated CPUs
cgroup/cpuset: remove use_parent_ecpus of cpuset
cgroup/cpuset: remove fetch_xcpus
...
|
|
Since Linux 5.6 tpm_version_major sysfs file is avaialble which gives
the TPM version.
Using this file the test can be skipped on systems with TPM 1.2.
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
KVM selftests changes for 6.12:
- Fix a goof that caused some Hyper-V tests to be skipped when run on bare
metal, i.e. NOT in a VM.
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES guest.
- Explicitly include one-off assets in .gitignore. Past Sean was completely
wrong about not being able to detect missing .gitignore entries.
- Verify userspace single-stepping works when KVM happens to handle a VM-Exit
in its fastpath.
- Misc cleanups
|
|
KVM x86 misc changes for 6.12
- Advertise AVX10.1 to userspace (effectively prep work for the "real" AVX10
functionality that is on the horizon).
- Rework common MSR handling code to suppress errors on userspace accesses to
unsupported-but-advertised MSRs. This will allow removing (almost?) all of
KVM's exemptions for userspace access to MSRs that shouldn't exist based on
the vCPU model (the actual cleanup is non-trivial future work).
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC) splits the
64-bit value into the legacy ICR and ICR2 storage, whereas Intel (APICv)
stores the entire 64-bit value a the ICR offset.
- Fix a bug where KVM would fail to exit to userspace if one was triggered by
a fastpath exit handler.
- Add fastpath handling of HLT VM-Exit to expedite re-entering the guest when
there's already a pending wake event at the time of the exit.
- Finally fix the RSM vs. nested VM-Enter WARN by forcing the vCPU out of
guest mode prior to signalling SHUTDOWN (architecturally, the SHUTDOWN is
supposed to hit L1, not L2).
|
|
KVK generic changes for 6.12:
- Fix a bug that results in KVM prematurely exiting to userspace for coalesced
MMIO/PIO in many cases, clean up the related code, and add a testcase.
- Fix a bug in kvm_clear_guest() where it would trigger a buffer overflow _if_
the gpa+len crosses a page boundary, which thankfully is guaranteed to not
happen in the current code base. Add WARNs in more helpers that read/write
guest memory to detect similar bugs.
|
|
Today whenever a memslot is moved or deleted, KVM invalidates the entire
page tables and generates fresh ones based on the new memslot layout.
This behavior traditionally was kept because of a bug which was never
fully investigated and caused VM instability with assigned GeForce
GPUs. It generally does not have a huge overhead, because the old
MMU is able to reuse cached page tables and the new one is more
scalabale and can resolve EPT violations/nested page faults in parallel,
but it has worse performance if the guest frequently deletes and
adds small memslots, and it's entirely not viable for TDX. This is
because TDX requires re-accepting of private pages after page dropping.
For non-TDX VMs, this series therefore introduces the
KVM_X86_QUIRK_SLOT_ZAP_ALL quirk, enabling users to control the behavior
of memslot zapping when a memslot is moved/deleted. The quirk is turned
on by default, leading to the zapping of all SPTEs when a memslot is
moved/deleted; users however have the option to turn off the quirk,
which limits the zapping only to those SPTEs hat lie within the range
of memslot being moved/deleted.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
* New ucontrol selftest
* Inline assembly touchups
|
|
Macros needed for 32-bit compilations were hidden behind 64-bit riscv
ifdefs. Fix the 32-bit compilations by moving macros to allow the
memory_layout test to run on 32-bit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: 73d05262a2ca ("selftests: riscv: Generalize mm selftests")
Link: https://lore.kernel.org/r/20240808-mmap_tests__fixes-v1-1-b1344b642a84@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"A fairly big update at this time, both in core and driver sides.
The core received rewrites in PCM buffer allocation handling and
locking optimizations, PCM rate updates followed by lots of cleanups.
In ASoC side, the legacy Intel drivers have been deprecated by AVS
drivers which leaded to the significant amount of code reduction.
SoundWire driver updates and other cleanups contributed more code
reduction, too.
USB-audio driver received a large cleanup of its big quirk table, and
the old snd_print*() API usages in many legacy drivers are replaced
with the standard print API.
Here are some highlights:
Core:
- More optimized locking in ALSA control code
- Rewrites of memalloc helpers for better DMA API usage
- Drop of obsoleted vmalloc PCM buffer helper API
- Continued MIDI2 UMP updates
- Support of a new user-space driven timer instance
- Update for more PCM support rates and cleanups
- Xrun counter report in the proc files
ASoC:
- Continued simplification and cleanup works for ASoC
- Extensive cleanups and refactoring of the Soundwire drivers
- Removal of Intel machine support obsoleted by the AVS driver
- Lots of DT schema conversions
- Machine support for many AMD and Intel x86 platforms
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek
RTL1320 SoundWire and rev C, and Texas Instruments TAS2563
USB-audio:
- Add support of multiple control interfaces
- A large rewrite of quirk table with macros
- Support for RME Digiface USB
HD-audio:
- Cleanup of quirk code for Samsung Galaxy laptops
- Clean up of detection of Cirrus codecs
- C-Media CM9825 HD-audio codec support
Others:
- Rewrites to standard print API in a lot of legacy drivers"
* tag 'sound-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (410 commits)
ASoC: topology: Fix redundant logical jump
ASoC: tas2781: Add Calibration Kcontrols for Chromebook
ASoC: amd: acp: refactor SoundWire machine driver code
ASoC: sdw_utils/intel: move soundwire endpoint parsing helper functions
ASoC: sdw_util/intel: move soundwire endpoint and dai link structures
ASoC: intel: sof_sdw: rename soundwire parsing helper functions
ASoC: intel: sof_sdw: rename soundwire endpoint and dailink structures
ASoC: atmel: mchp-pdmc: Retain Non-Runtime Controls
ALSA: hda/realtek: Add support for Galaxy Book2 Pro (NP950XEE)
ASoC: mediatek: mt7986-afe-pcm: Remove redundant error message
ALSA: memalloc: Use proper DMA mapping API for x86 S/G buffer allocations
ALSA: memalloc: Use proper DMA mapping API for x86 WC buffer allocations
ALSA: usb-audio: Add logitech Audio profile quirk
ASoc: mediatek: mt8365: Remove unneeded assignment
ASoC: Intel: ARL: Add entry for HDMI-In capture support to non-I2S codec boards.
ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for ARL.
ASoC: SOF: Intel: hda: remove common_hdmi_codec_drv
ASoC: Intel: sof_pcm512x: do not check common_hdmi_codec_drv
ASoC: Intel: ehl_rt5660: do not check common_hdmi_codec_drv
ASoC: Intel: skl_hda_dsp_generic: use common module for DAI links
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- a new int_pow test suite
- documentation update to clarify filename best practices
- kernel-doc fix for EXPORT_SYMBOL_IF_KUNIT
- change to build compile_commands.json automatically instead of
requiring a manual build
* tag 'linux_kselftest-kunit-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
lib/math: Add int_pow test suite
kunit: tool: Build compile_commands.json
kunit: Fix kernel-doc for EXPORT_SYMBOL_IF_KUNIT
Documentation: KUnit: Update filename best practices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
- test coverage for dup_fd() failure handling in unshare_fd()
- new selftest for the acct() syscall
- basic uprobe testcase
- several small fixes and cleanups to existing tests
- user and strscpy removal as they became kunit tests
- fixes to build failures and warnings
* tag 'linux_kselftest-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (21 commits)
selftests: kselftest: Use strerror() on nolibc
selftests/timers: Remove unused NSEC_PER_SEC macro
selftests:resctrl: Fix build failure on archs without __cpuid_count()
selftests/ftrace: Fix eventfs ownership testcase to find mount point
selftests: filesystems: fix warn_unused_result build warnings
selftests:core: test coverage for dup_fd() failure handling in unshare_fd()
selftests/ftrace: Fix test to handle both old and new kernels
kselftest: timers: Fix const correctness
selftests/ftrace: Add required dependency for kprobe tests
selftests: rust: config: disable GCC_PLUGINS
selftests: rust: config: add trailing newline
tracing/selftests: Run the ownership test twice
selftests/uprobes: Add a basic uprobe testcase
selftests: harness: rename __constructor_order for clarification
selftests: harness: remove unneeded __constructor_order_last()
selftest: acct: Add selftest for the acct() syscall
selftests: lib: remove strscpy test
selftests: user: remove user suite
kselftest: cpufreq: Add RTC wakeup alarm
selftests/exec: Fix grammar in an error message.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull nolibc updates from Shuah Khan:
"Highlights:
- Clang support (including LTO)
Other Changes:
- stdbool.h support
- argc/argv/envp arguments for constructors
- Small #include ordering fix"
* tag 'linux_kselftest-nolibc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (21 commits)
tools/nolibc: x86_64: use local label in memcpy/memmove
tools/nolibc: stackprotector: mark implicitly used symbols as used
tools/nolibc: crt: mark _start_c() as used
selftests/nolibc: run-tests.sh: allow building through LLVM
selftests/nolibc: use correct clang target for s390/systemz
selftests/nolibc: don't use libgcc when building with clang
selftests/nolibc: run-tests.sh: avoid overwriting CFLAGS_EXTRA
selftests/nolibc: add cc-option compatible with clang cross builds
selftests/nolibc: add support for LLVM= parameter
selftests/nolibc: determine $(srctree) first
selftests/nolibc: avoid passing NULL to printf("%s")
selftests/nolibc: report failure if no testcase passed
tools/nolibc: compiler: use attribute((naked)) if available
tools/nolibc: move entrypoint specifics to compiler.h
tools/nolibc: compiler: introduce __nolibc_has_attribute()
tools/nolibc: powerpc: limit stack-protector workaround to GCC
tools/nolibc: mips: load current function to $t9
tools/nolibc: arm: use clang-compatible asm syntax
tools/nolibc: pass argc, argv and envp to constructors
tools/nolibc: add stdbool.h header
...
|
|
After commit a0f7085f6a63 ("LoongArch: Add RANDOMIZE_KSTACK_OFFSET
support"), there are three new instructions "addi.d $fp, $sp, 32",
"sub.d $sp, $sp, $t0" and "addi.d $sp, $fp, -32" for the secondary
stack in do_syscall(), then there is a objtool warning "return with
modified stack frame" and no handle_syscall() which is the previous
frame of do_syscall() in the call trace when executing the command
"echo l > /proc/sysrq-trigger".
objdump shows something like this:
0000000000000000 <do_syscall>:
0: 02ff8063 addi.d $sp, $sp, -32
4: 29c04076 st.d $fp, $sp, 16
8: 29c02077 st.d $s0, $sp, 8
c: 29c06061 st.d $ra, $sp, 24
10: 02c08076 addi.d $fp, $sp, 32
...
74: 0011b063 sub.d $sp, $sp, $t0
...
a8: 4c000181 jirl $ra, $t0, 0
...
dc: 02ff82c3 addi.d $sp, $fp, -32
e0: 28c06061 ld.d $ra, $sp, 24
e4: 28c04076 ld.d $fp, $sp, 16
e8: 28c02077 ld.d $s0, $sp, 8
ec: 02c08063 addi.d $sp, $sp, 32
f0: 4c000020 jirl $zero, $ra, 0
The instruction "sub.d $sp, $sp, $t0" changes the stack bottom and the
new stack size is a random value, in order to find the return address of
do_syscall() which is stored in the original stack frame after executing
"jirl $ra, $t0, 0", it should use fp which points to the original stack
top.
At the beginning, the thought is tended to decode the secondary stack
instruction "sub.d $sp, $sp, $t0" and set it as a label, then check this
label for the two frame pointer instructions to change the cfa base and
cfa offset during the period of secondary stack in update_cfi_state().
This is valid for GCC but invalid for Clang due to there are different
secondary stack instructions for ClangBuiltLinux on LoongArch, something
like this:
0000000000000000 <do_syscall>:
...
88: 00119064 sub.d $a0, $sp, $a0
8c: 00150083 or $sp, $a0, $zero
...
Actually, it equals to a single instruction "sub.d $sp, $sp, $a0", but
there is no proper condition to check it as a label like GCC, and so the
beginning thought is not a good way.
Essentially, there are two special frame pointer instructions which are
"addi.d $fp, $sp, imm" and "addi.d $sp, $fp, imm", the first one points
fp to the original stack top and the second one restores the original
stack bottom from fp.
Based on the above analysis, in order to avoid adding an arch-specific
update_cfi_state(), we just add a member "frame_pointer" in the "struct
symbol" as a label to avoid affecting the current normal case, then set
it as true only if there is "addi.d $sp, $fp, imm". The last is to check
this label for the two frame pointer instructions to change the cfa base
and cfa offset in update_cfi_state().
Tested with the following two configs:
(1) CONFIG_RANDOMIZE_KSTACK_OFFSET=y &&
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=n
(2) CONFIG_RANDOMIZE_KSTACK_OFFSET=y &&
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
By the way, there is no effect for x86 with this patch, tested on the
x86 machine with Fedora 40 system.
Cc: stable@vger.kernel.org # 6.9+
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Thomas Gleixner:
- Rework kcpuid to handle the the autogenerated CSV file correctly and
update the CSV file to cover the whole zoo of CPUID.
- Avoid memcpy() for ia32 syscall_get_arguments() and use direct
assignments as fortified memcpy() is unhappy about writing/reading
beyond the end of the addresses destination/source struct member
- A few new PCI IDs for AMD
- Update MAINTAINERS to cover x86 specific selftests
* tag 'x86-misc-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add selftests/x86 entry
x86/amd_nb: Add new PCI IDs for AMD family 1Ah model 60h-70h
x86/syscall: Avoid memcpy() for ia32 syscall_get_arguments()
MAINTAINERS: Add x86 cpuid database entry
tools/x86/kcpuid: Introduce a complete cpuid bitfields CSV file
tools/x86/kcpuid: Parse subleaf ranges if provided
tools/x86/kcpuid: Recognize all leaves with subleaves
tools/x86/kcpuid: Strip bitfield names leading/trailing whitespace
tools/x86/kcpuid: Protect against faulty "max subleaf" values
tools/x86/kcpuid: Set max possible subleaves count to 64
tools/x86/kcpuid: Properly align long-description columns
tools/x86/kcpuid: Remove unused variable
x86/amd_nb: Add new PCI IDs for AMD family 1Ah model 60h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 memory management updates from Thomas Gleixner:
- Make LAM enablement safe vs. kernel threads using a process mm
temporarily as switching back to the process would not update CR3 and
therefore not enable LAM causing faults in user space when using
tagged pointers. Cure it by synchronizing LAM enablement via IPIs to
all CPUs which use the related mm.
- Cure a LAM harmless inconsistency between CR3 and the state during
context switch. It's both confusing and prone to lead to real bugs
- Handle alt stack handling for threads which run with a non-zero
protection key. The non-zero key prevents the kernel to access the
alternate stack. Cure it by temporarily enabling all protection keys
for the alternate stack setup/restore operations.
- Provide a EFI config table identity mapping for kexec kernel to
prevent kexec fails because the new kernel cannot access the config
table array
- Use GB pages only when a full GB is mapped in the identity map as
otherwise the CPU can speculate into reserved areas after the end of
memory which causes malfunction on UV systems.
- Remove the noisy and pointless SRAT table dump during boot
- Use is_ioremap_addr() for iounmap() address range checks instead of
high_memory. is_ioremap_addr() is more precise.
* tag 'x86-mm-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioremap: Improve iounmap() address range checks
x86/mm: Remove duplicate check from build_cr3()
x86/mm: Remove unused NX related declarations
x86/mm: Remove unused CR3_HW_ASID_BITS
x86/mm: Don't print out SRAT table information
x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
x86/kexec: Add EFI config table identity mapping for kexec kernel
selftests/mm: Add new testcases for pkeys
x86/pkeys: Restore altstack access in sigreturn()
x86/pkeys: Update PKRU to enable all pkeys before XSAVE
x86/pkeys: Add helper functions to update PKRU on the sigframe
x86/pkeys: Add PKRU as a parameter in signal handling functions
x86/mm: Cleanup prctl_enable_tagged_addr() nr_bits error checking
x86/mm: Fix LAM inconsistency during context switch
x86/mm: Use IPIs to synchronize LAM enablement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is quite a quiet release for SPI. The one new core feature here
is support for configuring the state of the MOSI pin when the bus is
idle, there are some devices which are very fragile in this regard
even when the chip select signal is not asserted. Otherwise we have
some new driver support, a bunch of small fixes and some general
cleanup work.
- Support for configuring the state of the MOSI pin when the the bus
is idle
- Add the Elgin JG0309-01 in spidev
- Support for Marvell xSPI, Mediatek MTK7981, Microchip PIC64GX, NXP
i.MX8ULP, and Rockchip RK3576 controllers
I also accidentally pulled in an IIO DT bindings update due to a typo
when applying the MOSI idle state patches"
* tag 'spi-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (65 commits)
spi: geni-qcom: Use devm functions to simplify code
spi: remove spi_controller_is_slave() and spi_slave_abort()
platform/olpc: olpc-xo175-ec: switch to use spi_target_abort().
spi: slave-mt27xx: switch to use target_abort
spi: spidev: switch to use spi_target_abort()
spi: slave-system-control: switch to use spi_target_abort()
spi: slave-time: switch to use spi_target_abort()
spi: switch to use spi_controller_is_target()
spi: fspi: add support for imx8ulp
spi: fspi: involve lut_num for struct nxp_fspi_devtype_data
dt-bindings: spi: nxp-fspi: add imx8ulp support
spi: spidev_fdx: Fix the wrong format specifier
spi: mxs: Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS()
spi: dt-bindings: Add rockchip,rk3576-spi compatible
spi: Revert "spi: Insert the missing pci_dev_put()before return"
spi: zynq-qspi: Replace kzalloc with kmalloc for buffer allocation
spi: ppc4xx: Sort headers
spi: ppc4xx: Revert "handle irq_of_parse_and_map() errors"
spi: zynqmp-gqspi: Simplify with dev_err_probe()
spi: zynqmp-gqspi: Use devm_spi_alloc_host()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Core:
- Overhaul of posix-timers in preparation of removing the workaround
for periodic timers which have signal delivery ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep time
since the large rewrite to a non-cascading wheel, but the extra
jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack for
real time tasks and enforce it at the core level instead of having
inconsistent individual checks in various timer setup functions.
- The usual set of updates and enhancements all over the place.
Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers"
* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
ntp: Make sure RTC is synchronized when time goes backwards
treewide: Fix wrong singular form of jiffies in comments
cpu: Use already existing usleep_range()
timers: Rename next_expiry_recalc() to be unique
platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
clocksource/drivers/jcore: Use request_percpu_irq()
clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
clocksource: acpi_pm: Add external callback for suspend/resume
clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
dt-bindings: timer: rockchip: Add rk3576 compatible
timers: Annotate possible non critical data race of next_expiry
timers: Remove historical extra jiffie for timeout in msleep()
hrtimer: Use and report correct timerslack values for realtime tasks
hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
timers: Add sparse annotation for timer_sync_wait_running().
signal: Replace BUG_ON()s
...
|
|
Add a test to verify that the SIGURG signal created by an out-of-bound
message in UNIX sockets is well controlled by the file_send_sigiotask
hook.
Test coverage for security/landlock is 92.2% of 1046 lines according to
gcc/gcov-14.
Signed-off-by: Tahera Fahimi <fahimitahera@gmail.com>
Link: https://lore.kernel.org/r/50daeed4d4f60d71e9564d0f24004a373fc5f7d5.1725657728.git.fahimitahera@gmail.com
[mic: Improve commit message and add test coverage, improve test with
four variants to fully cover the hook, use abstract unix socket to avoid
managing a file, use dedicated variable per process, add comments, avoid
negative ASSERT, move close calls]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Expand the signal scoping tests with pthread_kill(3). Test if a scoped
thread can send signal to a process in the same scoped domain, or a
non-sandboxed thread.
Signed-off-by: Tahera Fahimi <fahimitahera@gmail.com>
Link: https://lore.kernel.org/r/c15e9eafbb2da1210e46ba8db7b8907f5ea11009.1725657728.git.fahimitahera@gmail.com
[mic: Improve commit message]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Provide tests for the signal scoping. If the signal is 0, no signal
will be sent, but the permission of a process to send a signal will be
checked. Likewise, this test consider one signal for each signal
category: SIGTRAP, SIGURG, SIGHUP, and SIGTSTP.
Signed-off-by: Tahera Fahimi <fahimitahera@gmail.com>
Link: https://lore.kernel.org/r/15dc202bb7f0a462ddeaa0c1cd630d2a7c6fa5c5.1725657728.git.fahimitahera@gmail.com
[mic: Fix commit message, use dedicated variables per process, properly
close FDs, extend send_sig_to_parent to make sure scoping works as
expected]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Currently, a sandbox process is not restricted to sending a signal (e.g.
SIGKILL) to a process outside the sandbox environment. The ability to
send a signal for a sandboxed process should be scoped the same way
abstract UNIX sockets are scoped. Therefore, we extend the "scoped"
field in a ruleset with LANDLOCK_SCOPE_SIGNAL to specify that a ruleset
will deny sending any signal from within a sandbox process to its parent
(i.e. any parent sandbox or non-sandboxed processes).
This patch adds file_set_fowner and file_free_security hooks to set and
release a pointer to the file owner's domain. This pointer, fown_domain
in landlock_file_security will be used in file_send_sigiotask to check
if the process can send a signal.
The ruleset_with_unknown_scope test is updated to support
LANDLOCK_SCOPE_SIGNAL.
This depends on two new changes:
- commit 1934b212615d ("file: reclaim 24 bytes from f_owner"): replace
container_of(fown, struct file, f_owner) with fown->file .
- commit 26f204380a3c ("fs: Fix file_set_fowner LSM hook
inconsistencies"): lock before calling the hook.
Signed-off-by: Tahera Fahimi <fahimitahera@gmail.com>
Closes: https://github.com/landlock-lsm/linux/issues/8
Link: https://lore.kernel.org/r/df2b4f880a2ed3042992689a793ea0951f6798a5.1725657727.git.fahimitahera@gmail.com
[mic: Update landlock_get_current_domain()'s return type, improve and
fix locking in hook_file_set_fowner(), simplify and fix sleepable call
and locking issue in hook_file_send_sigiotask() and rebase on the latest
VFS tree, simplify hook_task_kill() and quickly return when not
sandboxed, improve comments, rename LANDLOCK_SCOPED_SIGNAL]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
