summaryrefslogtreecommitdiff
path: root/virt
AgeCommit message (Collapse)Author
2017-05-18KVM: arm/arm64: Hold slots_lock when unregistering kvm io bus devicesChristoffer Dall
We were not holding the kvm->slots_lock as required when calling kvm_io_bus_unregister_dev() as required. This only affects the error path, but still, let's do our due diligence. Reported by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2017-05-18KVM: arm/arm64: Fix bug when registering redist iodevsChristoffer Dall
If userspace creates the VCPUs after initializing the VGIC, then we end up in a situation where we trigger a bug in kvm_vcpu_get_idx(), because it is called prior to adding the VCPU into the vcpus array on the VM. There is no tight coupling between the VCPU index and the area of the redistributor region used for the VCPU, so we can simply ensure that all creations of redistributors are serialized per VM, and increment an offset when we successfully add a redistributor. The vgic_register_redist_iodev() function can be called from two paths: vgic_redister_all_redist_iodev() which is called via the kvm_vgic_addr() device attribute handler. This patch already holds the kvm->lock mutex. The other path is via kvm_vgic_vcpu_init, which is called through a longer chain from kvm_vm_ioctl_create_vcpu(), which releases the kvm->lock mutex just before calling kvm_arch_vcpu_create(), so we can simply take this mutex again later for our purposes. Fixes: ab6f468c10 ("KVM: arm/arm64: Register iodevs when setting redist base and creating VCPUs") Signed-off-by: Christoffer Dall <cdall@linaro.org> Tested-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2017-05-16kvm: arm/arm64: Fix use after free of stage2 page tableSuzuki K Poulose
We yield the kvm->mmu_lock occassionaly while performing an operation (e.g, unmap or permission changes) on a large area of stage2 mappings. However this could possibly cause another thread to clear and free up the stage2 page tables while we were waiting for regaining the lock and thus the original thread could end up in accessing memory that was freed. This patch fixes the problem by making sure that the stage2 pagetable is still valid after we regain the lock. The fact that mmu_notifer->release() could be called twice (via __mmu_notifier_release and mmu_notifier_unregsister) enhances the possibility of hitting this race where there are two threads trying to unmap the entire guest shadow pages. While at it, cleanup the redudant checks around cond_resched_lock in stage2_wp_range(), as cond_resched_lock already does the same checks. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: andreyknvl@google.com Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-05-16kvm: arm/arm64: Force reading uncached stage2 PGDSuzuki K Poulose
Make sure we don't use a cached value of the KVM stage2 PGD while resetting the PGD. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-05-15kvm: arm/arm64: Fix race in resetting stage2 PGDSuzuki K Poulose
In kvm_free_stage2_pgd() we check the stage2 PGD before holding the lock and proceed to take the lock if it is valid. And we unmap the page tables, followed by releasing the lock. We reset the PGD only after dropping this lock, which could cause a race condition where another thread waiting on or even holding the lock, could potentially see that the PGD is still valid and proceed to perform a stage2 operation and later encounter a NULL PGD. [223090.242280] Unable to handle kernel NULL pointer dereference at virtual address 00000040 [223090.262330] PC is at unmap_stage2_range+0x8c/0x428 [223090.262332] LR is at kvm_unmap_hva_handler+0x2c/0x3c [223090.262531] Call trace: [223090.262533] [<ffff0000080adb78>] unmap_stage2_range+0x8c/0x428 [223090.262535] [<ffff0000080adf40>] kvm_unmap_hva_handler+0x2c/0x3c [223090.262537] [<ffff0000080ace2c>] handle_hva_to_gpa+0xb0/0x104 [223090.262539] [<ffff0000080af988>] kvm_unmap_hva+0x5c/0xbc [223090.262543] [<ffff0000080a2478>] kvm_mmu_notifier_invalidate_page+0x50/0x8c [223090.262547] [<ffff0000082274f8>] __mmu_notifier_invalidate_page+0x5c/0x84 [223090.262551] [<ffff00000820b700>] try_to_unmap_one+0x1d0/0x4a0 [223090.262553] [<ffff00000820c5c8>] rmap_walk+0x1cc/0x2e0 [223090.262555] [<ffff00000820c90c>] try_to_unmap+0x74/0xa4 [223090.262557] [<ffff000008230ce4>] migrate_pages+0x31c/0x5ac [223090.262561] [<ffff0000081f869c>] compact_zone+0x3fc/0x7ac [223090.262563] [<ffff0000081f8ae0>] compact_zone_order+0x94/0xb0 [223090.262564] [<ffff0000081f91c0>] try_to_compact_pages+0x108/0x290 [223090.262569] [<ffff0000081d5108>] __alloc_pages_direct_compact+0x70/0x1ac [223090.262571] [<ffff0000081d64a0>] __alloc_pages_nodemask+0x434/0x9f4 [223090.262572] [<ffff0000082256f0>] alloc_pages_vma+0x230/0x254 [223090.262574] [<ffff000008235e5c>] do_huge_pmd_anonymous_page+0x114/0x538 [223090.262576] [<ffff000008201bec>] handle_mm_fault+0xd40/0x17a4 [223090.262577] [<ffff0000081fb324>] __get_user_pages+0x12c/0x36c [223090.262578] [<ffff0000081fb804>] get_user_pages_unlocked+0xa4/0x1b8 [223090.262579] [<ffff0000080a3ce8>] __gfn_to_pfn_memslot+0x280/0x31c [223090.262580] [<ffff0000080a3dd0>] gfn_to_pfn_prot+0x4c/0x5c [223090.262582] [<ffff0000080af3f8>] kvm_handle_guest_abort+0x240/0x774 [223090.262584] [<ffff0000080b2bac>] handle_exit+0x11c/0x1ac [223090.262586] [<ffff0000080ab99c>] kvm_arch_vcpu_ioctl_run+0x31c/0x648 [223090.262587] [<ffff0000080a1d78>] kvm_vcpu_ioctl+0x378/0x768 [223090.262590] [<ffff00000825df5c>] do_vfs_ioctl+0x324/0x5a4 [223090.262591] [<ffff00000825e26c>] SyS_ioctl+0x90/0xa4 [223090.262595] [<ffff000008085d84>] el0_svc_naked+0x38/0x3c This patch moves the stage2 PGD manipulation under the lock. Reported-by: Alexander Graf <agraf@suse.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-05-15KVM: arm/arm64: vgic-v3: Use PREbits to infer the number of ICH_APxRn_EL2 ↵Marc Zyngier
registers The GICv3 documentation is extremely confusing, as it talks about the number of priorities represented by the ICH_APxRn_EL2 registers, while it should really talk about the number of preemption levels. This leads to a bug where we may access undefined ICH_APxRn_EL2 registers, since PREbits is allowed to be smaller than PRIbits. Thankfully, nobody seem to have taken this path so far... The fix is to use ICH_VTR_EL2.PREbits instead. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-05-15KVM: arm/arm64: vgic-v3: Do not use Active+Pending state for a HW interruptMarc Zyngier
When an interrupt is injected with the HW bit set (indicating that deactivation should be propagated to the physical distributor), special care must be taken so that we never mark the corresponding LR with the Active+Pending state (as the pending state is kept in the physycal distributor). Cc: stable@vger.kernel.org Fixes: 59529f69f504 ("KVM: arm/arm64: vgic-new: Add GICv3 world switch backend") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-05-15KVM: arm/arm64: vgic-v2: Do not use Active+Pending state for a HW interruptMarc Zyngier
When an interrupt is injected with the HW bit set (indicating that deactivation should be propagated to the physical distributor), special care must be taken so that we never mark the corresponding LR with the Active+Pending state (as the pending state is kept in the physycal distributor). Cc: stable@vger.kernel.org Fixes: 140b086dd197 ("KVM: arm/arm64: vgic-new: Add GICv2 world switch backend") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-05-09Merge tag 'kvm-arm-for-v4.12-round2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD Second round of KVM/ARM Changes for v4.12. Changes include: - A fix related to the 32-bit idmap stub - A fix to the bitmask used to deode the operands of an AArch32 CP instruction - We have moved the files shared between arch/arm/kvm and arch/arm64/kvm to virt/kvm/arm - We add support for saving/restoring the virtual ITS state to userspace
2017-05-09KVM: arm/arm64: vgic-its: Cleanup after failed ITT restoreChristoffer Dall
When failing to restore the ITT for a DTE, we should remove the failed device entry from the list and free the object. We slightly refactor vgic_its_destroy to be able to reuse the now separate vgic_its_free_dte() function. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2017-05-09KVM: arm/arm64: Don't call map_resources when restoring ITS tablesChristoffer Dall
The only reason we called kvm_vgic_map_resources() when restoring the ITS tables was because we wanted to have the KVM iodevs registered in the KVM IO bus framework at the time when the ITS was restored such that a restored and active device can inject MSIs prior to otherwise calling kvm_vgic_map_resources() from the first run of a VCPU. Since we now register the KVM iodevs for the redestributors and ITS as soon as possible (when setting the base addresses), we no longer need this call and kvm_vgic_map_resources() is again called only when first running a VCPU. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2017-05-09KVM: arm/arm64: Register ITS iodev when setting base addressChristoffer Dall
We have to register the ITS iodevice before running the VM, because in migration scenarios, we may be restoring a live device that wishes to inject MSIs before the VCPUs have started. All we need to register the ITS io device is the base address of the ITS, so we can simply register that when the base address of the ITS is set. [ Code to fix concurrency issues when setting the ITS base address and to fix the undef base address check written by Marc Zyngier ] Signed-off-by: Christoffer Dall <cdall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2017-05-09KVM: arm/arm64: Get rid of its->initialized fieldMarc Zyngier
The its->initialized doesn't bring much to the table, and creates unnecessary ordering between setting the address and initializing it (which amounts to exactly nothing). Let's kill it altogether, making KVM_DEV_ARM_VGIC_CTRL_INIT the no-op it deserves to be. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2017-05-09KVM: arm/arm64: Register iodevs when setting redist base and creating VCPUsChristoffer Dall
Instead of waiting with registering KVM iodevs until the first VCPU is run, we can actually create the iodevs when the redist base address is set. The only downside is that we must now also check if we need to do this for VCPUs which are created after creating the VGIC, because there is no enforced ordering between creating the VGIC (and setting its base addresses) and creating the VCPUs. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2017-05-09KVM: arm/arm64: Slightly rework kvm_vgic_addrChristoffer Dall
As we are about to handle setting the address for the redistributor base region separately from some of the other base addresses, let's rework this function to leave a little more room for being flexible in what each type of base address does. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2017-05-09KVM: arm/arm64: Make vgic_v3_check_base more broadly usableChristoffer Dall
As we are about to fiddle with the IO device registration mechanism, let's be a little more careful when setting base addresses as early as possible. When setting a base address, we can check that there's address space enough for its scope and when the last of the two base addresses (dist and redist) get set, we can also check if the regions overlap at that time. This allows us to provide error messages to the user at time when trying to set the base address, as opposed to later when trying to run the VM. To do this, we make vgic_v3_check_base available in the core vgic-v3 code as well as in the other parts of the GICv3 code, namely the MMIO config code. We also return true for undefined base addresses so that the function can be used before all base addresses are set; all callers already check for uninitialized addresses before calling this function. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2017-05-09KVM: arm/arm64: Refactor vgic_register_redist_iodevsChristoffer Dall
Split out the function to register all the redistributor iodevs into a function that handles a single redistributor at a time in preparation for being able to call this per VCPU as these get created. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2017-05-09Merge branch 'kvm-ppc-next' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD The main thing here is a new implementation of the in-kernel XICS interrupt controller emulation for POWER9 machines, from Ben Herrenschmidt. POWER9 has a new interrupt controller called XIVE (eXternal Interrupt Virtualization Engine) which is able to deliver interrupts directly to guest virtual CPUs in hardware without hypervisor intervention. With this new code, the guest still sees the old XICS interface but performance is better because the XICS emulation in the host uses the XIVE directly rather than going through a XICS emulation in firmware. Conflicts: arch/powerpc/kernel/cpu_setup_power.S [cherry-picked fix] arch/powerpc/kvm/book3s_xive.c [include asm/debugfs.h]
2017-05-09KVM: set no_llseek in stat_fops_per_vmGeliang Tang
In vm_stat_get_per_vm_fops and vcpu_stat_get_per_vm_fops, since we use nonseekable_open() to open, we should use no_llseek() to seek, not generic_file_llseek(). Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-09KVM: arm/arm64: vgic: Rename kvm_vgic_vcpu_init to kvm_vgic_vcpu_enableChristoffer Dall
This function really doesn't init anything, it enables the CPU interface, so name it as such, which gives us the name to use for actual init work later on. Signed-off-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com>
2017-05-08Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: - the rest of MM - various misc things - procfs updates - lib/ updates - checkpatch updates - kdump/kexec updates - add kvmalloc helpers, use them - time helper updates for Y2038 issues. We're almost ready to remove current_fs_time() but that awaits a btrfs merge. - add tracepoints to DAX * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits) drivers/staging/ccree/ssi_hash.c: fix build with gcc-4.4.4 selftests/vm: add a test for virtual address range mapping dax: add tracepoint to dax_insert_mapping() dax: add tracepoint to dax_writeback_one() dax: add tracepoints to dax_writeback_mapping_range() dax: add tracepoints to dax_load_hole() dax: add tracepoints to dax_pfn_mkwrite() dax: add tracepoints to dax_iomap_pte_fault() mtd: nand: nandsim: convert to memalloc_noreclaim_*() treewide: convert PF_MEMALLOC manipulations to new helpers mm: introduce memalloc_noreclaim_{save,restore} mm: prevent potential recursive reclaim due to clearing PF_MEMALLOC mm/huge_memory.c: deposit a pgtable for DAX PMD faults when required mm/huge_memory.c: use zap_deposited_table() more time: delete CURRENT_TIME_SEC and CURRENT_TIME gfs2: replace CURRENT_TIME with current_time apparmorfs: replace CURRENT_TIME with current_time() lustre: replace CURRENT_TIME macro fs: ubifs: replace CURRENT_TIME_SEC with current_time fs: ufs: use ktime_get_real_ts64() for birthtime ...
2017-05-08mm: introduce kv[mz]alloc helpersMichal Hocko
Patch series "kvmalloc", v5. There are many open coded kmalloc with vmalloc fallback instances in the tree. Most of them are not careful enough or simply do not care about the underlying semantic of the kmalloc/page allocator which means that a) some vmalloc fallbacks are basically unreachable because the kmalloc part will keep retrying until it succeeds b) the page allocator can invoke a really disruptive steps like the OOM killer to move forward which doesn't sound appropriate when we consider that the vmalloc fallback is available. As it can be seen implementing kvmalloc requires quite an intimate knowledge if the page allocator and the memory reclaim internals which strongly suggests that a helper should be implemented in the memory subsystem proper. Most callers, I could find, have been converted to use the helper instead. This is patch 6. There are some more relying on __GFP_REPEAT in the networking stack which I have converted as well and Eric Dumazet was not opposed [2] to convert them as well. [1] http://lkml.kernel.org/r/20170130094940.13546-1-mhocko@kernel.org [2] http://lkml.kernel.org/r/1485273626.16328.301.camel@edumazet-glaptop3.roam.corp.google.com This patch (of 9): Using kmalloc with the vmalloc fallback for larger allocations is a common pattern in the kernel code. Yet we do not have any common helper for that and so users have invented their own helpers. Some of them are really creative when doing so. Let's just add kv[mz]alloc and make sure it is implemented properly. This implementation makes sure to not make a large memory pressure for > PAGE_SZE requests (__GFP_NORETRY) and also to not warn about allocation failures. This also rules out the OOM killer as the vmalloc is a more approapriate fallback than a disruptive user visible action. This patch also changes some existing users and removes helpers which are specific for them. In some cases this is not possible (e.g. ext4_kvmalloc, libcfs_kvzalloc) because those seems to be broken and require GFP_NO{FS,IO} context which is not vmalloc compatible in general (note that the page table allocation is GFP_KERNEL). Those need to be fixed separately. While we are at it, document that __vmalloc{_node} about unsupported gfp mask because there seems to be a lot of confusion out there. kvmalloc_node will warn about GFP_KERNEL incompatible (which are not superset) flags to catch new abusers. Existing ones would have to die slowly. [sfr@canb.auug.org.au: f2fs fixup] Link: http://lkml.kernel.org/r/20170320163735.332e64b7@canb.auug.org.au Link: http://lkml.kernel.org/r/20170306103032.2540-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Andreas Dilger <adilger@dilger.ca> [ext4 part] Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: John Hubbard <jhubbard@nvidia.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "ARM: - HYP mode stub supports kexec/kdump on 32-bit - improved PMU support - virtual interrupt controller performance improvements - support for userspace virtual interrupt controller (slower, but necessary for KVM on the weird Broadcom SoCs used by the Raspberry Pi 3) MIPS: - basic support for hardware virtualization (ImgTec P5600/P6600/I6400 and Cavium Octeon III) PPC: - in-kernel acceleration for VFIO s390: - support for guests without storage keys - adapter interruption suppression x86: - usual range of nVMX improvements, notably nested EPT support for accessed and dirty bits - emulation of CPL3 CPUID faulting generic: - first part of VCPU thread request API - kvm_stat improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (227 commits) kvm: nVMX: Don't validate disabled secondary controls KVM: put back #ifndef CONFIG_S390 around kvm_vcpu_kick Revert "KVM: Support vCPU-based gfn->hva cache" tools/kvm: fix top level makefile KVM: x86: don't hold kvm->lock in KVM_SET_GSI_ROUTING KVM: Documentation: remove VM mmap documentation kvm: nVMX: Remove superfluous VMX instruction fault checks KVM: x86: fix emulation of RSM and IRET instructions KVM: mark requests that need synchronization KVM: return if kvm_vcpu_wake_up() did wake up the VCPU KVM: add explicit barrier to kvm_vcpu_kick KVM: perform a wake_up in kvm_make_all_cpus_request KVM: mark requests that do not need a wakeup KVM: remove #ifndef CONFIG_S390 around kvm_vcpu_wake_up KVM: x86: always use kvm_make_request instead of set_bit KVM: add kvm_{test,clear}_request to replace {test,clear}_bit s390: kvm: Cpu model support for msa6, msa7 and msa8 KVM: x86: remove irq disablement around KVM_SET_CLOCK/KVM_GET_CLOCK kvm: better MWAIT emulation for guests KVM: x86: virtualize cpuid faulting ...
2017-05-08KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLESEric Auger
This patch adds a new attribute to GICV3 KVM device KVM_DEV_ARM_VGIC_GRP_CTRL group. This allows userspace to flush all GICR pending tables into guest RAM. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-08KVM: arm64: vgic-its: Fix pending table syncEric Auger
In its_sync_lpi_pending_table() we currently ignore the target_vcpu of the LPIs. We sync the pending bit found in the vcpu pending table even if the LPI is not targeting it. Also in vgic_its_cmd_handle_invall() we are supposed to read the config table data for the LPIs associated to the collection ID. At the moment we refresh all LPI config information. This patch passes a vpcu to vgic_copy_lpi_list() so that this latter returns a snapshot of the LPIs targeting this CPU and only those. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-08KVM: arm64: vgic-its: ITT save and restoreEric Auger
Implement routines to save and restore device ITT and their interrupt table entries (ITE). Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org>
2017-05-08KVM: arm64: vgic-its: Device table save/restoreEric Auger
This patch saves the device table entries into guest RAM. Both flat table and 2 stage tables are supported. DeviceId indexing is used. For each device listed in the device table, we also save the translation table using the vgic_its_save/restore_itt routines. Those functions will be implemented in a subsequent patch. On restore, devices are re-allocated and their itt are re-built. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org>
2017-05-08KVM: arm64: vgic-its: vgic_its_check_id returns the entry's GPAEric Auger
As vgic_its_check_id() computes the device/collection entry's GPA, let's return it so that new callers can retrieve it easily. Signed-off-by: Eric Auger <eric.auger@redhat.com> Acked-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-08KVM: arm64: vgic-its: Collection table save/restoreEric Auger
The save path copies the collection entries into guest RAM at the GPA specified in the BASER register. This obviously requires the BASER to be set. The last written element is a dummy collection table entry. We do not index by collection ID as the collection entry can fit into 8 bytes while containing the collection ID. On restore path we re-allocate the collection objects. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-08KVM: arm64: vgic-its: Add infrastructure for table lookupEric Auger
Add a generic scan_its_table() helper whose role consists in scanning a contiguous table located in guest RAM and applying a callback on each entry. Entries can be handled as linked lists since the callback may return an id offset to the next entry and also indicate whether the entry is the last one. Helper functions also are added to compute the device/event ID offset to the next DTE/ITE. compute_next_devid_offset, compute_next_eventid_offset and scan_table will become static in subsequent patches Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-08KVM: arm64: vgic-its: vgic_its_alloc_ite/deviceEric Auger
Add two new helpers to allocate an its ite and an its device. This will avoid duplication on restore path. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-08KVM: arm64: vgic-its: KVM_DEV_ARM_ITS_SAVE/RESTORE_TABLESEric Auger
Introduce new attributes in KVM_DEV_ARM_VGIC_GRP_CTRL group: - KVM_DEV_ARM_ITS_SAVE_TABLES: saves the ITS tables into guest RAM - KVM_DEV_ARM_ITS_RESTORE_TABLES: restores them into VGIC internal structures. We hold the vcpus lock during the save and restore to make sure no vcpu is running. At this stage the functionality is not yet implemented. Only the skeleton is put in place. Signed-off-by: Eric Auger <eric.auger@redhat.com> [Given we will move the iodev register until setting the base addr] Reviewed-by: Christoffer Dall <cdall@linaro.org>
2017-05-08KVM: arm64: vgic-its: Read config and pending bit in add_lpi()Eric Auger
When creating the lpi we now ask the redistributor what is the state of the LPI (priority, enabled, pending). Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org>
2017-05-08KVM: arm64: vgic-v3: vgic_v3_lpi_sync_pending_statusEric Auger
this new helper synchronizes the irq pending_latch with the LPI pending bit status found in rdist pending table. As the status is consumed, we reset the bit in pending table. As we need the PENDBASER_ADDRESS() in vgic-v3, let's move its definition in the irqchip header. We restore the full length of the field, ie [51:16]. Same for PROPBASER_ADDRESS with full field length of [51:12]. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org>
2017-05-08KVM: arm64: vgic-its: Check the device id matches TYPER DEVBITS rangeEric Auger
On MAPD we currently check the device id can be stored in the device table. Let's first check it can be encoded within the range defined by TYPER DEVBITS. Also check the collection ID belongs to the 16 bit range as GITS_TYPER CIL field equals to 0. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-08KVM: arm64: vgic-its: Interpret MAPD ITT_addr fieldEric Auger
Up to now the MAPD ITT_addr had been ignored. We will need it for save/restore. Let's record it in the its_device struct. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-08KVM: arm64: vgic-its: Interpret MAPD Size field and check related errorsEric Auger
Up to now the MAPD's ITT size field has been ignored. It encodes the number of eventid bit minus 1. It should be used to check the eventid when a MAPTI command is issued on a device. Let's store the number of eventid bits in the its_device and do the check on MAPTI. Also make sure the ITT size field does not exceed the GITS_TYPER IDBITS field. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-08KVM: arm64: vgic-its: Implement vgic_mmio_uaccess_write_its_iidrEric Auger
The GITS_IIDR revision field is used to encode the migration ABI revision. So we need to restore it to check the table layout is readable by the destination. By writing the IIDR, userspace thus forces the ABI revision to be used and this must be less than or equal to the max revision KVM supports. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org>
2017-05-08KVM: arm64: vgic-its: Introduce migration ABI infrastructureEric Auger
We plan to support different migration ABIs, ie. characterizing the ITS table layout format in guest RAM. For example, a new ABI will be needed if vLPIs get supported for nested use case. So let's introduce an array of supported ABIs (at the moment a single ABI is supported though). The following characteristics are foreseen to vary with the ABI: size of table entries, save/restore operation, the way abi settings are applied. By default the MAX_ABI_REV is applied on its creation. In subsequent patches we will introduce a way for the userspace to change the ABI in use. The entry sizes now are set according to the ABI version and not hardcoded anymore. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org>
2017-05-08KVM: arm64: vgic-its: Implement vgic_mmio_uaccess_write_its_creadrEric Auger
GITS_CREADR needs to be restored so let's implement the associated uaccess_write_its callback. The write only is allowed if the its is disabled. Signed-off-by: Eric Auger <eric.auger@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org>
2017-05-08KVM: arm64: vgic-its: Implement vgic_its_has_attr_regs and attr_regs_accessEric Auger
This patch implements vgic_its_has_attr_regs and vgic_its_attr_regs_access upon the MMIO framework. VGIC ITS KVM device KVM_DEV_ARM_VGIC_GRP_ITS_REGS group becomes functional. At least GITS_CREADR and GITS_IIDR require to differentiate a guest write action from a user access. As such let's introduce a new uaccess_its_write vgic_register_region callback. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-08KVM: arm/arm64: vgic: expose (un)lock_all_vcpusEric Auger
We need to use those helpers in vgic-its.c so let's expose them in the private vgic header. Signed-off-by: Eric Auger <eric.auger@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <cdall@linaro.org>
2017-05-08KVM: arm64: vgic-its: KVM_DEV_ARM_VGIC_GRP_ITS_REGS groupEric Auger
The ITS KVM device exposes a new KVM_DEV_ARM_VGIC_GRP_ITS_REGS group which allows the userspace to save/restore ITS registers. At this stage the get/set/has operations are not yet implemented. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Christoffer Dall <cdall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-05-08arm/arm64: vgic: turn vgic_find_mmio_region into publicEric Auger
We plan to use vgic_find_mmio_region in vgic-its.c so let's turn it into a public function. Also let's take the opportunity to rename the region parameter into regions to emphasize this latter is an array of regions. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <cdall@linaro.org>
2017-05-08KVM: arm/arm64: vgic-its: rename itte into iteEric Auger
The actual abbreviation for the interrupt translation table entry is ITE. Let's rename all itte instances by ite. Signed-off-by: Eric Auger <eric.auger@redhat.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <cdall@linaro.org>
2017-05-05Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - kdump support, including two necessary memblock additions: memblock_clear_nomap() and memblock_cap_memory_range() - ARMv8.3 HWCAP bits for JavaScript conversion instructions, complex numbers and weaker release consistency - arm64 ACPI platform MSI support - arm perf updates: ACPI PMU support, L3 cache PMU in some Qualcomm SoCs, Cortex-A53 L2 cache events and DTLB refills, MAINTAINERS update for DT perf bindings - architected timer errata framework (the arch/arm64 changes only) - support for DMA_ATTR_FORCE_CONTIGUOUS in the arm64 iommu DMA API - arm64 KVM refactoring to use common system register definitions - remove support for ASID-tagged VIVT I-cache (no ARMv8 implementation using it and deprecated in the architecture) together with some I-cache handling clean-up - PE/COFF EFI header clean-up/hardening - define BUG() instruction without CONFIG_BUG * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (92 commits) arm64: Fix the DMA mmap and get_sgtable API with DMA_ATTR_FORCE_CONTIGUOUS arm64: Print DT machine model in setup_machine_fdt() arm64: pmu: Wire-up Cortex A53 L2 cache events and DTLB refills arm64: module: split core and init PLT sections arm64: pmuv3: handle pmuv3+ arm64: Add CNTFRQ_EL0 trap handler arm64: Silence spurious kbuild warning on menuconfig arm64: pmuv3: use arm_pmu ACPI framework arm64: pmuv3: handle !PMUv3 when probing drivers/perf: arm_pmu: add ACPI framework arm64: add function to get a cpu's MADT GICC table drivers/perf: arm_pmu: split out platform device probe logic drivers/perf: arm_pmu: move irq request/free into probe drivers/perf: arm_pmu: split cpu-local irq request/free drivers/perf: arm_pmu: rename irq request/free functions drivers/perf: arm_pmu: handle no platform_device drivers/perf: arm_pmu: simplify cpu_pmu_request_irqs() drivers/perf: arm_pmu: factor out pmu registration drivers/perf: arm_pmu: fold init into alloc drivers/perf: arm_pmu: define armpmu_init_fn ...
2017-05-04KVM: put back #ifndef CONFIG_S390 around kvm_vcpu_kickPaolo Bonzini
The #ifndef was removed in 75aaafb79f73516b69d5639ad30a72d72e75c8b4, but it was also protecting smp_send_reschedule() in kvm_vcpu_kick(). Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-04KVM: arm/arm64: Move shared files to virt/kvm/armChristoffer Dall
For some time now we have been having a lot of shared functionality between the arm and arm64 KVM support in arch/arm, which not only required a horrible inter-arch reference from the Makefile in arch/arm64/kvm, but also created confusion for newcomers to the code base, as was recently seen on the mailing list. Further, it causes confusion for things like cscope, which needs special attention to index specific shared files for arm64 from the arm tree. Move the shared files into virt/kvm/arm and move the trace points along with it. When moving the tracepoints we have to modify the way the vgic creates definitions of the trace points, so we take the chance to include the VGIC tracepoints in its very own special vgic trace.h file. Signed-off-by: Christoffer Dall <cdall@linaro.org>
2017-05-03Revert "KVM: Support vCPU-based gfn->hva cache"Paolo Bonzini
This reverts commit bbd6411513aa8ef3ea02abab61318daf87c1af1e. I've been sitting on this revert for too long and it unfortunately missed 4.11. It's also the reason why I haven't merged ring-based dirty tracking for 4.12. Using kvm_vcpu_memslots in kvm_gfn_to_hva_cache_init and kvm_vcpu_write_guest_offset_cached means that the MSR value can now be used to access SMRAM, simply by making it point to an SMRAM physical address. This is problematic because it lets the guest OS overwrite memory that it shouldn't be able to touch. Cc: stable@vger.kernel.org Fixes: bbd6411513aa8ef3ea02abab61318daf87c1af1e Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-02KVM: x86: don't hold kvm->lock in KVM_SET_GSI_ROUTINGDavid Hildenbrand
We needed the lock to avoid racing with creation of the irqchip on x86. As kvm_set_irq_routing() calls srcu_synchronize_expedited(), this lock might be held for a longer time. Let's introduce an arch specific callback to check if we can actually add irq routes. For x86, all we have to do is check if we have an irqchip in the kernel. We don't need kvm->lock at that point as the irqchip is marked as inititalized only when actually fully created. Reported-by: Steve Rutherford <srutherford@google.com> Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Fixes: 1df6ddede10a ("KVM: x86: race between KVM_SET_GSI_ROUTING and KVM_CREATE_IRQCHIP") Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>