From 01aef10bd7c836f763e95356a502c15c83a7f127 Mon Sep 17 00:00:00 2001 From: "Russell King (Oracle)" Date: Fri, 19 Nov 2021 13:47:04 +0000 Subject: net: phylink: remove phylink_helper_basex_speed() As there are no users of phylink_helper_basex_speed(), we can now remove this functionality. Signed-off-by: Russell King (Oracle) --- drivers/net/phy/phylink.c | 28 ---------------------------- include/linux/phylink.h | 6 ------ 2 files changed, 34 deletions(-) diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 06943889d747..33c285252584 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -2778,34 +2778,6 @@ static const struct sfp_upstream_ops sfp_phylink_ops = { /* Helpers for MAC drivers */ -/** - * phylink_helper_basex_speed() - 1000BaseX/2500BaseX helper - * @state: a pointer to a &struct phylink_link_state - * - * Inspect the interface mode, advertising mask or forced speed and - * decide whether to run at 2.5Gbit or 1Gbit appropriately, switching - * the interface mode to suit. @state->interface is appropriately - * updated, and the advertising mask has the "other" baseX_Full flag - * cleared. - */ -void phylink_helper_basex_speed(struct phylink_link_state *state) -{ - if (phy_interface_mode_is_8023z(state->interface)) { - bool want_2500 = state->an_enabled ? - phylink_test(state->advertising, 2500baseX_Full) : - state->speed == SPEED_2500; - - if (want_2500) { - phylink_clear(state->advertising, 1000baseX_Full); - state->interface = PHY_INTERFACE_MODE_2500BASEX; - } else { - phylink_clear(state->advertising, 2500baseX_Full); - state->interface = PHY_INTERFACE_MODE_1000BASEX; - } - } -} -EXPORT_SYMBOL_GPL(phylink_helper_basex_speed); - static void phylink_decode_c37_word(struct phylink_link_state *state, uint16_t config_reg, int speed) { diff --git a/include/linux/phylink.h b/include/linux/phylink.h index 223781622b33..6d06896fc20d 100644 --- a/include/linux/phylink.h +++ b/include/linux/phylink.h @@ -160,11 +160,6 @@ struct phylink_mac_ops { * clearing unsupported speeds and duplex settings. The port modes * should not be cleared; phylink_set_port_modes() will help with this. * - * If the @state->interface mode is %PHY_INTERFACE_MODE_1000BASEX - * or %PHY_INTERFACE_MODE_2500BASEX, select the appropriate mode - * based on @state->advertising and/or @state->speed and update - * @state->interface accordingly. See phylink_helper_basex_speed(). - * * When @config->supported_interfaces has been set, phylink will iterate * over the supported interfaces to determine the full capability of the * MAC. The validation function must not print errors if @state->interface @@ -579,7 +574,6 @@ int phylink_speed_up(struct phylink *pl); #define phylink_test(bm, mode) __phylink_do_bit(test_bit, bm, mode) void phylink_set_port_modes(unsigned long *bits); -void phylink_helper_basex_speed(struct phylink_link_state *state); void phylink_mii_c22_pcs_decode_state(struct phylink_link_state *state, u16 bmsr, u16 lpa); -- cgit