From 11b25c864fe16a8b1e9c3c916c283f910ab1c1a4 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 15 Apr 2020 11:07:17 +0100 Subject: net: marvell10g: soft-reset the PHY when coming out of low power Soft-reset the PHY when coming out of low power mode, which seems to be necessary with firmware versions 0.3.3.0 and 0.3.10.0. This depends on ("net: marvell10g: report firmware version") Fixes: c9cc1c815d36 ("net: phy: marvell10g: place in powersave mode at probe") Reported-by: Matteo Croce Tested-by: Matteo Croce Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: Russell King --- drivers/net/phy/marvell10g.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index e54d60052ce4..d71a18061f06 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -75,7 +75,8 @@ enum { /* Vendor2 MMD registers */ MV_V2_PORT_CTRL = 0xf001, - MV_V2_PORT_CTRL_PWRDOWN = 0x0800, + MV_V2_PORT_CTRL_SWRST = BIT(15), + MV_V2_PORT_CTRL_PWRDOWN = BIT(11), MV_V2_TEMP_CTRL = 0xf08a, MV_V2_TEMP_CTRL_MASK = 0xc000, MV_V2_TEMP_CTRL_SAMPLE = 0x0000, @@ -239,8 +240,17 @@ static int mv3310_power_down(struct phy_device *phydev) static int mv3310_power_up(struct phy_device *phydev) { - return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL, - MV_V2_PORT_CTRL_PWRDOWN); + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); + int ret; + + ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL, + MV_V2_PORT_CTRL_PWRDOWN); + + if (priv->firmware_ver < 0x00030000) + return ret; + + return phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MV_V2_PORT_CTRL, + MV_V2_PORT_CTRL_SWRST); } static int mv3310_reset(struct phy_device *phydev, u32 unit) -- cgit