From 739575689fa8f37c75ec37f7c45443e4705d2139 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 9 Jul 2016 10:58:16 +0100 Subject: pci: mvebu: time out reset on link up If the port reports that the link is up while we are resetting, there's little point in waiting for the full duration. Signed-off-by: Russell King --- drivers/pci/host/pci-mvebu.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c index f353a6eb2f01..e0300c67abf6 100644 --- a/drivers/pci/host/pci-mvebu.c +++ b/drivers/pci/host/pci-mvebu.c @@ -1167,6 +1167,7 @@ static int mvebu_pcie_powerup(struct mvebu_pcie_port *port) if (port->reset_gpio) { u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000; + unsigned int i; of_property_read_u32(port->dn, "reset-delay-us", &reset_udelay); @@ -1174,7 +1175,13 @@ static int mvebu_pcie_powerup(struct mvebu_pcie_port *port) udelay(100); gpiod_set_value_cansleep(port->reset_gpio, 0); - msleep(reset_udelay / 1000); + for (i = 0; i < reset_udelay; i += 1000) { + if (mvebu_pcie_link_up(port)) + break; + msleep(1); + } + + printk("%s: reset completed in %dus\n", port->name, i); } return 0; @@ -1262,15 +1269,16 @@ static int mvebu_pcie_probe(struct platform_device *pdev) if (!child) continue; - ret = mvebu_pcie_powerup(port); - if (ret < 0) - continue; - port->base = mvebu_pcie_map_registers(pdev, child, port); if (IS_ERR(port->base)) { dev_err(dev, "%s: cannot map registers\n", port->name); port->base = NULL; - mvebu_pcie_powerdown(port); + continue; + } + + ret = mvebu_pcie_powerup(port); + if (ret < 0) { + port->base = NULL; continue; } -- cgit From a9bb1c9500f98ca61a7a3f818eb4aae79132b75b Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 5 Jan 2017 16:32:14 +0000 Subject: net: phy: allow settings table to support more than 32 link modes Allow the phy settings table to support more than 32 link modes by switching to the ethtool link mode bit number representation, rather than storing the mask. This will allow phylink and other ethtool code to share the settings table to look up settings. Reviewed-by: Florian Fainelli Signed-off-by: Russell King --- drivers/net/phy/phy.c | 44 ++++++++++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 18 deletions(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index d0626bf5c540..0fe478002908 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -200,7 +200,7 @@ EXPORT_SYMBOL(phy_aneg_done); struct phy_setting { int speed; int duplex; - u32 setting; + int bit; }; /* A mapping of all SUPPORTED settings to speed/duplex. This table @@ -210,57 +210,57 @@ static const struct phy_setting settings[] = { { .speed = SPEED_10000, .duplex = DUPLEX_FULL, - .setting = SUPPORTED_10000baseKR_Full, + .bit = ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, }, { .speed = SPEED_10000, .duplex = DUPLEX_FULL, - .setting = SUPPORTED_10000baseKX4_Full, + .bit = ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, }, { .speed = SPEED_10000, .duplex = DUPLEX_FULL, - .setting = SUPPORTED_10000baseT_Full, + .bit = ETHTOOL_LINK_MODE_10000baseT_Full_BIT, }, { .speed = SPEED_2500, .duplex = DUPLEX_FULL, - .setting = SUPPORTED_2500baseX_Full, + .bit = ETHTOOL_LINK_MODE_2500baseX_Full_BIT, }, { .speed = SPEED_1000, .duplex = DUPLEX_FULL, - .setting = SUPPORTED_1000baseKX_Full, + .bit = ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, }, { .speed = SPEED_1000, .duplex = DUPLEX_FULL, - .setting = SUPPORTED_1000baseT_Full, + .bit = ETHTOOL_LINK_MODE_1000baseT_Full_BIT, }, { .speed = SPEED_1000, .duplex = DUPLEX_HALF, - .setting = SUPPORTED_1000baseT_Half, + .bit = ETHTOOL_LINK_MODE_1000baseT_Half_BIT, }, { .speed = SPEED_100, .duplex = DUPLEX_FULL, - .setting = SUPPORTED_100baseT_Full, + .bit = ETHTOOL_LINK_MODE_100baseT_Full_BIT, }, { .speed = SPEED_100, .duplex = DUPLEX_HALF, - .setting = SUPPORTED_100baseT_Half, + .bit = ETHTOOL_LINK_MODE_100baseT_Half_BIT, }, { .speed = SPEED_10, .duplex = DUPLEX_FULL, - .setting = SUPPORTED_10baseT_Full, + .bit = ETHTOOL_LINK_MODE_10baseT_Full_BIT, }, { .speed = SPEED_10, .duplex = DUPLEX_HALF, - .setting = SUPPORTED_10baseT_Half, + .bit = ETHTOOL_LINK_MODE_10baseT_Half_BIT, }, }; @@ -268,7 +268,8 @@ static const struct phy_setting settings[] = { * phy_lookup_setting - lookup a PHY setting * @speed: speed to match * @duplex: duplex to match - * @features: allowed link modes + * @mask: allowed link modes + * @maxbit: bit size of link modes * @exact: an exact match is required * * Search the settings array for a setting that matches the speed and @@ -282,13 +283,14 @@ static const struct phy_setting settings[] = { * they all fail, %NULL will be returned. */ static const struct phy_setting * -phy_lookup_setting(int speed, int duplex, u32 features, bool exact) +phy_lookup_setting(int speed, int duplex, const unsigned long *mask, + size_t maxbit, bool exact) { const struct phy_setting *p, *match = NULL, *last = NULL; int i; for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) { - if (p->setting & features) { + if (p->bit < maxbit && test_bit(p->bit, mask)) { last = p; if (p->speed == speed && p->duplex == duplex) { /* Exact match for speed and duplex */ @@ -327,7 +329,9 @@ phy_lookup_setting(int speed, int duplex, u32 features, bool exact) static const struct phy_setting * phy_find_valid(int speed, int duplex, u32 supported) { - return phy_lookup_setting(speed, duplex, supported, false); + unsigned long mask = supported; + + return phy_lookup_setting(speed, duplex, &mask, BITS_PER_LONG, false); } /** @@ -344,12 +348,14 @@ unsigned int phy_supported_speeds(struct phy_device *phy, unsigned int *speeds, unsigned int size) { + unsigned long supported = phy->supported; unsigned int count = 0; unsigned int idx = 0; for (idx = 0; idx < ARRAY_SIZE(settings) && count < size; idx++) /* Assumes settings are grouped by speed */ - if ((settings[idx].setting & phy->supported) && + if (settings[idx].bit < BITS_PER_LONG && + !test_bit(settings[idx].bit, &supported) && (count == 0 || speeds[count - 1] != settings[idx].speed)) speeds[count++] = settings[idx].speed; @@ -367,7 +373,9 @@ unsigned int phy_supported_speeds(struct phy_device *phy, */ static inline bool phy_check_valid(int speed, int duplex, u32 features) { - return !!phy_lookup_setting(speed, duplex, features, true); + unsigned long mask = features; + + return !!phy_lookup_setting(speed, duplex, &mask, BITS_PER_LONG, true); } /** -- cgit From 6eff35ddf2f0f5a201fdd2f4e6101e3c365206e1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 2 Jan 2017 17:52:18 +0000 Subject: net: phy: split out PHY speed and duplex string generation Other code would like to make use of this, so make the speed and duplex string generation visible, and place it in a separate file. Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: Russell King --- drivers/net/phy/phy-core.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/phy/phy.c | 38 +---------------------------------- include/linux/phy.h | 3 +++ 3 files changed, 53 insertions(+), 37 deletions(-) diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c index 6739b738bbaf..bf01a24f21ce 100644 --- a/drivers/net/phy/phy-core.c +++ b/drivers/net/phy/phy-core.c @@ -9,6 +9,55 @@ #include #include +const char *phy_speed_to_str(int speed) +{ + switch (speed) { + case SPEED_10: + return "10Mbps"; + case SPEED_100: + return "100Mbps"; + case SPEED_1000: + return "1Gbps"; + case SPEED_2500: + return "2.5Gbps"; + case SPEED_5000: + return "5Gbps"; + case SPEED_10000: + return "10Gbps"; + case SPEED_14000: + return "14Gbps"; + case SPEED_20000: + return "20Gbps"; + case SPEED_25000: + return "25Gbps"; + case SPEED_40000: + return "40Gbps"; + case SPEED_50000: + return "50Gbps"; + case SPEED_56000: + return "56Gbps"; + case SPEED_100000: + return "100Gbps"; + case SPEED_UNKNOWN: + return "Unknown"; + default: + return "Unsupported (update phy-core.c)"; + } +} +EXPORT_SYMBOL_GPL(phy_speed_to_str); + +const char *phy_duplex_to_str(unsigned int duplex) +{ + if (duplex == DUPLEX_HALF) + return "Half"; + if (duplex == DUPLEX_FULL) + return "Full"; + if (duplex == DUPLEX_UNKNOWN) + return "Unknown"; + return "Unsupported (update phy-core.c)"; +} +EXPORT_SYMBOL_GPL(phy_duplex_to_str); + static void mmd_phy_indirect(struct mii_bus *bus, int phy_addr, int devad, u16 regnum) { diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 0fe478002908..f128a538388f 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -39,42 +39,6 @@ #include -static const char *phy_speed_to_str(int speed) -{ - switch (speed) { - case SPEED_10: - return "10Mbps"; - case SPEED_100: - return "100Mbps"; - case SPEED_1000: - return "1Gbps"; - case SPEED_2500: - return "2.5Gbps"; - case SPEED_5000: - return "5Gbps"; - case SPEED_10000: - return "10Gbps"; - case SPEED_14000: - return "14Gbps"; - case SPEED_20000: - return "20Gbps"; - case SPEED_25000: - return "25Gbps"; - case SPEED_40000: - return "40Gbps"; - case SPEED_50000: - return "50Gbps"; - case SPEED_56000: - return "56Gbps"; - case SPEED_100000: - return "100Gbps"; - case SPEED_UNKNOWN: - return "Unknown"; - default: - return "Unsupported (update phy.c)"; - } -} - #define PHY_STATE_STR(_state) \ case PHY_##_state: \ return __stringify(_state); \ @@ -110,7 +74,7 @@ void phy_print_status(struct phy_device *phydev) netdev_info(phydev->attached_dev, "Link is Up - %s/%s - flow control %s\n", phy_speed_to_str(phydev->speed), - DUPLEX_FULL == phydev->duplex ? "Full" : "Half", + phy_duplex_to_str(phydev->duplex), phydev->pause ? "rx/tx" : "off"); } else { netdev_info(phydev->attached_dev, "Link is Down\n"); diff --git a/include/linux/phy.h b/include/linux/phy.h index 0bb5b212ab42..e8264c78b75b 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -667,6 +667,9 @@ struct phy_fixup { int (*run)(struct phy_device *phydev); }; +const char *phy_speed_to_str(int speed); +const char *phy_duplex_to_str(unsigned int duplex); + /** * phy_read_mmd - Convenience function for reading a register * from an MMD on a given PHY. -- cgit From de0cadf458fe6038d5854573c5d57a175d190f96 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 5 Jan 2017 16:47:39 +0000 Subject: net: phy: move phy_lookup_setting() and guts of phy_supported_speeds() to phy-core phy_lookup_setting() provides useful functionality in ethtool code outside phylib. Move it to phy-core and allow it to be re-used (eg, in phylink) rather than duplicated elsewhere. Note that this supports the larger linkmode space. As we move the phy settings table, we also need to move the guts of phy_supported_speeds() as well. Reviewed-by: Andrew Lunn Signed-off-by: Russell King --- drivers/net/phy/phy-core.c | 126 +++++++++++++++++++++++++++++++++++++++++++ drivers/net/phy/phy.c | 130 +-------------------------------------------- include/linux/phy.h | 15 ++++++ 3 files changed, 142 insertions(+), 129 deletions(-) diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c index bf01a24f21ce..c07845e77004 100644 --- a/drivers/net/phy/phy-core.c +++ b/drivers/net/phy/phy-core.c @@ -58,6 +58,132 @@ const char *phy_duplex_to_str(unsigned int duplex) } EXPORT_SYMBOL_GPL(phy_duplex_to_str); +/* A mapping of all SUPPORTED settings to speed/duplex. This table + * must be grouped by speed and sorted in descending match priority + * - iow, descending speed. */ +static const struct phy_setting settings[] = { + { + .speed = SPEED_10000, + .duplex = DUPLEX_FULL, + .bit = ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, + }, + { + .speed = SPEED_10000, + .duplex = DUPLEX_FULL, + .bit = ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, + }, + { + .speed = SPEED_10000, + .duplex = DUPLEX_FULL, + .bit = ETHTOOL_LINK_MODE_10000baseT_Full_BIT, + }, + { + .speed = SPEED_2500, + .duplex = DUPLEX_FULL, + .bit = ETHTOOL_LINK_MODE_2500baseX_Full_BIT, + }, + { + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, + .bit = ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, + }, + { + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, + .bit = ETHTOOL_LINK_MODE_1000baseT_Full_BIT, + }, + { + .speed = SPEED_1000, + .duplex = DUPLEX_HALF, + .bit = ETHTOOL_LINK_MODE_1000baseT_Half_BIT, + }, + { + .speed = SPEED_100, + .duplex = DUPLEX_FULL, + .bit = ETHTOOL_LINK_MODE_100baseT_Full_BIT, + }, + { + .speed = SPEED_100, + .duplex = DUPLEX_HALF, + .bit = ETHTOOL_LINK_MODE_100baseT_Half_BIT, + }, + { + .speed = SPEED_10, + .duplex = DUPLEX_FULL, + .bit = ETHTOOL_LINK_MODE_10baseT_Full_BIT, + }, + { + .speed = SPEED_10, + .duplex = DUPLEX_HALF, + .bit = ETHTOOL_LINK_MODE_10baseT_Half_BIT, + }, +}; + +/** + * phy_lookup_setting - lookup a PHY setting + * @speed: speed to match + * @duplex: duplex to match + * @mask: allowed link modes + * @maxbit: bit size of link modes + * @exact: an exact match is required + * + * Search the settings array for a setting that matches the speed and + * duplex, and which is supported. + * + * If @exact is unset, either an exact match or %NULL for no match will + * be returned. + * + * If @exact is set, an exact match, the fastest supported setting at + * or below the specified speed, the slowest supported setting, or if + * they all fail, %NULL will be returned. + */ +const struct phy_setting * +phy_lookup_setting(int speed, int duplex, const unsigned long *mask, + size_t maxbit, bool exact) +{ + const struct phy_setting *p, *match = NULL, *last = NULL; + int i; + + for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) { + if (p->bit < maxbit && test_bit(p->bit, mask)) { + last = p; + if (p->speed == speed && p->duplex == duplex) { + /* Exact match for speed and duplex */ + match = p; + break; + } else if (!exact) { + if (!match && p->speed <= speed) + /* Candidate */ + match = p; + + if (p->speed < speed) + break; + } + } + } + + if (!match && !exact) + match = last; + + return match; +} +EXPORT_SYMBOL_GPL(phy_lookup_setting); + +size_t phy_speeds(unsigned int *speeds, size_t size, + unsigned long *mask, size_t maxbit) +{ + size_t count; + int i; + + for (i = 0, count = 0; i < ARRAY_SIZE(settings) && count < size; i++) + if (settings[i].bit < maxbit && + test_bit(settings[i].bit, mask) && + (count == 0 || speeds[count - 1] != settings[i].speed)) + speeds[count++] = settings[i].speed; + + return count; +} + static void mmd_phy_indirect(struct mii_bus *bus, int phy_addr, int devad, u16 regnum) { diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index f128a538388f..74873bc3a565 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -158,125 +158,6 @@ int phy_aneg_done(struct phy_device *phydev) } EXPORT_SYMBOL(phy_aneg_done); -/* A structure for mapping a particular speed and duplex - * combination to a particular SUPPORTED and ADVERTISED value - */ -struct phy_setting { - int speed; - int duplex; - int bit; -}; - -/* A mapping of all SUPPORTED settings to speed/duplex. This table - * must be grouped by speed and sorted in descending match priority - * - iow, descending speed. */ -static const struct phy_setting settings[] = { - { - .speed = SPEED_10000, - .duplex = DUPLEX_FULL, - .bit = ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, - }, - { - .speed = SPEED_10000, - .duplex = DUPLEX_FULL, - .bit = ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, - }, - { - .speed = SPEED_10000, - .duplex = DUPLEX_FULL, - .bit = ETHTOOL_LINK_MODE_10000baseT_Full_BIT, - }, - { - .speed = SPEED_2500, - .duplex = DUPLEX_FULL, - .bit = ETHTOOL_LINK_MODE_2500baseX_Full_BIT, - }, - { - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, - .bit = ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, - }, - { - .speed = SPEED_1000, - .duplex = DUPLEX_FULL, - .bit = ETHTOOL_LINK_MODE_1000baseT_Full_BIT, - }, - { - .speed = SPEED_1000, - .duplex = DUPLEX_HALF, - .bit = ETHTOOL_LINK_MODE_1000baseT_Half_BIT, - }, - { - .speed = SPEED_100, - .duplex = DUPLEX_FULL, - .bit = ETHTOOL_LINK_MODE_100baseT_Full_BIT, - }, - { - .speed = SPEED_100, - .duplex = DUPLEX_HALF, - .bit = ETHTOOL_LINK_MODE_100baseT_Half_BIT, - }, - { - .speed = SPEED_10, - .duplex = DUPLEX_FULL, - .bit = ETHTOOL_LINK_MODE_10baseT_Full_BIT, - }, - { - .speed = SPEED_10, - .duplex = DUPLEX_HALF, - .bit = ETHTOOL_LINK_MODE_10baseT_Half_BIT, - }, -}; - -/** - * phy_lookup_setting - lookup a PHY setting - * @speed: speed to match - * @duplex: duplex to match - * @mask: allowed link modes - * @maxbit: bit size of link modes - * @exact: an exact match is required - * - * Search the settings array for a setting that matches the speed and - * duplex, and which is supported. - * - * If @exact is unset, either an exact match or %NULL for no match will - * be returned. - * - * If @exact is set, an exact match, the fastest supported setting at - * or below the specified speed, the slowest supported setting, or if - * they all fail, %NULL will be returned. - */ -static const struct phy_setting * -phy_lookup_setting(int speed, int duplex, const unsigned long *mask, - size_t maxbit, bool exact) -{ - const struct phy_setting *p, *match = NULL, *last = NULL; - int i; - - for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) { - if (p->bit < maxbit && test_bit(p->bit, mask)) { - last = p; - if (p->speed == speed && p->duplex == duplex) { - /* Exact match for speed and duplex */ - match = p; - break; - } else if (!exact) { - if (!match && p->speed <= speed) - /* Candidate */ - match = p; - - if (p->speed < speed) - break; - } - } - } - - if (!match && !exact) - match = last; - - return match; -} - /** * phy_find_valid - find a PHY setting that matches the requested parameters * @speed: desired speed @@ -313,17 +194,8 @@ unsigned int phy_supported_speeds(struct phy_device *phy, unsigned int size) { unsigned long supported = phy->supported; - unsigned int count = 0; - unsigned int idx = 0; - - for (idx = 0; idx < ARRAY_SIZE(settings) && count < size; idx++) - /* Assumes settings are grouped by speed */ - if (settings[idx].bit < BITS_PER_LONG && - !test_bit(settings[idx].bit, &supported) && - (count == 0 || speeds[count - 1] != settings[idx].speed)) - speeds[count++] = settings[idx].speed; - return count; + return phy_speeds(speeds, size, &supported, BITS_PER_LONG); } /** diff --git a/include/linux/phy.h b/include/linux/phy.h index e8264c78b75b..8a280257778c 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -670,6 +670,21 @@ struct phy_fixup { const char *phy_speed_to_str(int speed); const char *phy_duplex_to_str(unsigned int duplex); +/* A structure for mapping a particular speed and duplex + * combination to a particular SUPPORTED and ADVERTISED value + */ +struct phy_setting { + u32 speed; + u8 duplex; + u8 bit; +}; + +const struct phy_setting * +phy_lookup_setting(int speed, int duplex, const unsigned long *mask, + size_t maxbit, bool exact); +size_t phy_speeds(unsigned int *speeds, size_t size, + unsigned long *mask, size_t maxbit); + /** * phy_read_mmd - Convenience function for reading a register * from an MMD on a given PHY. -- cgit From 31444bbbdb57683c7a08c13c1209924e402e52ce Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 5 Jan 2017 16:57:48 +0000 Subject: net: phy: add 1000Base-X to phy settings table Add the missing 1000Base-X entry to the phy settings table. This was not included because the original code could not cope with more than 32 bits of link mode mask. Reviewed-by: Andrew Lunn Signed-off-by: Russell King --- drivers/net/phy/phy-core.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c index c07845e77004..21f75ae244b3 100644 --- a/drivers/net/phy/phy-core.c +++ b/drivers/net/phy/phy-core.c @@ -87,6 +87,11 @@ static const struct phy_setting settings[] = { .duplex = DUPLEX_FULL, .bit = ETHTOOL_LINK_MODE_1000baseKX_Full_BIT, }, + { + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, + .bit = ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + }, { .speed = SPEED_1000, .duplex = DUPLEX_FULL, -- cgit From 030677de3d92436583433eb63cf13540713ed34c Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 18 Sep 2015 14:42:16 +0100 Subject: net: phy: provide a hook for link up/link down events Sometimes, we need to do additional work between the PHY coming up and marking the carrier present - for example, we may need to wait for the PHY to MAC link to finish negotiation. This changes phylib to provide a notification function pointer which avoids the built-in netif_carrier_on() and netif_carrier_off() functions. Standard ->adjust_link functionality is provided by hooking a helper into the new ->phy_link_change method. Reviewed-by: Florian Fainelli Signed-off-by: Russell King --- drivers/net/phy/phy.c | 42 ++++++++++++++++++++---------------------- drivers/net/phy/phy_device.c | 14 ++++++++++++++ include/linux/phy.h | 1 + 3 files changed, 35 insertions(+), 22 deletions(-) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 74873bc3a565..5fd411ed3b85 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -863,9 +863,15 @@ void phy_start(struct phy_device *phydev) } EXPORT_SYMBOL(phy_start); -static void phy_adjust_link(struct phy_device *phydev) +static void phy_link_up(struct phy_device *phydev) { - phydev->adjust_link(phydev->attached_dev); + phydev->phy_link_change(phydev, true, true); + phy_led_trigger_change_speed(phydev); +} + +static void phy_link_down(struct phy_device *phydev, bool do_carrier) +{ + phydev->phy_link_change(phydev, false, do_carrier); phy_led_trigger_change_speed(phydev); } @@ -910,8 +916,7 @@ void phy_state_machine(struct work_struct *work) /* If the link is down, give up on negotiation for now */ if (!phydev->link) { phydev->state = PHY_NOLINK; - netif_carrier_off(phydev->attached_dev); - phy_adjust_link(phydev); + phy_link_down(phydev, true); break; } @@ -923,9 +928,7 @@ void phy_state_machine(struct work_struct *work) /* If AN is done, we're running */ if (err > 0) { phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); - phy_adjust_link(phydev); - + phy_link_up(phydev); } else if (0 == phydev->link_timeout--) needs_aneg = true; break; @@ -950,8 +953,7 @@ void phy_state_machine(struct work_struct *work) } } phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); - phy_adjust_link(phydev); + phy_link_up(phydev); } break; case PHY_FORCING: @@ -961,13 +963,12 @@ void phy_state_machine(struct work_struct *work) if (phydev->link) { phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); + phy_link_up(phydev); } else { if (0 == phydev->link_timeout--) needs_aneg = true; + phy_link_down(phydev, false); } - - phy_adjust_link(phydev); break; case PHY_RUNNING: /* Only register a CHANGE if we are polling and link changed @@ -999,14 +1000,12 @@ void phy_state_machine(struct work_struct *work) if (phydev->link) { phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); + phy_link_up(phydev); } else { phydev->state = PHY_NOLINK; - netif_carrier_off(phydev->attached_dev); + phy_link_down(phydev, true); } - phy_adjust_link(phydev); - if (phy_interrupt_is_valid(phydev)) err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED); @@ -1014,8 +1013,7 @@ void phy_state_machine(struct work_struct *work) case PHY_HALTED: if (phydev->link) { phydev->link = 0; - netif_carrier_off(phydev->attached_dev); - phy_adjust_link(phydev); + phy_link_down(phydev, true); do_suspend = true; } break; @@ -1035,11 +1033,11 @@ void phy_state_machine(struct work_struct *work) if (phydev->link) { phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); + phy_link_up(phydev); } else { phydev->state = PHY_NOLINK; + phy_link_down(phydev, false); } - phy_adjust_link(phydev); } else { phydev->state = PHY_AN; phydev->link_timeout = PHY_AN_TIMEOUT; @@ -1051,11 +1049,11 @@ void phy_state_machine(struct work_struct *work) if (phydev->link) { phydev->state = PHY_RUNNING; - netif_carrier_on(phydev->attached_dev); + phy_link_up(phydev); } else { phydev->state = PHY_NOLINK; + phy_link_down(phydev, false); } - phy_adjust_link(phydev); } break; } diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 2f742ae5b92e..32602b8d1524 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -688,6 +688,19 @@ struct phy_device *phy_find_first(struct mii_bus *bus) } EXPORT_SYMBOL(phy_find_first); +static void phy_link_change(struct phy_device *phydev, bool up, bool do_carrier) +{ + struct net_device *netdev = phydev->attached_dev; + + if (do_carrier) { + if (up) + netif_carrier_on(netdev); + else + netif_carrier_off(netdev); + } + phydev->adjust_link(netdev); +} + /** * phy_prepare_link - prepares the PHY layer to monitor link status * @phydev: target phy_device struct @@ -953,6 +966,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, goto error; } + phydev->phy_link_change = phy_link_change; phydev->attached_dev = dev; dev->phydev = phydev; diff --git a/include/linux/phy.h b/include/linux/phy.h index 8a280257778c..0a5e8e62c9e0 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -474,6 +474,7 @@ struct phy_device { u8 mdix; u8 mdix_ctrl; + void (*phy_link_change)(struct phy_device *, bool up, bool do_carrier); void (*adjust_link)(struct net_device *dev); }; #define to_phy_device(d) container_of(to_mdio_device(d), \ -- cgit From ca5b9ad37658d401e11a9d772a7f6d1f2dff5ef3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 16 Oct 2015 12:18:41 +0100 Subject: net: phy: export phy_start_machine() for phylink phylink will need phy_start_machine exported, so lets export it as a GPL symbol. Documentation/networking/phy.txt indicates that this should be a PHY API function. Reviewed-by: Florian Fainelli Signed-off-by: Russell King --- drivers/net/phy/phy.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 5fd411ed3b85..ba92c4ca21f3 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -557,6 +557,7 @@ void phy_start_machine(struct phy_device *phydev) { queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, HZ); } +EXPORT_SYMBOL_GPL(phy_start_machine); /** * phy_trigger_machine - trigger the state machine to run -- cgit From 473e9c44c274555594c50f947c366dc0cf84b525 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 25 Sep 2015 17:43:52 +0100 Subject: net: phy: add I2C mdio bus Add an I2C MDIO bus bridge library, to allow phylib to access PHYs which are connected to an I2C bus instead of the more conventional MDIO bus. Such PHYs can be found in SFP adapters and SFF modules. Since PHYs appear at I2C bus address 0x40..0x5f, and 0x50/0x51 are reserved for SFP EEPROMs/diagnostics, we must not allow the MDIO bus to access these I2C addresses. Signed-off-by: Russell King --- drivers/net/phy/Kconfig | 10 +++++ drivers/net/phy/Makefile | 1 + drivers/net/phy/mdio-i2c.c | 109 +++++++++++++++++++++++++++++++++++++++++++++ drivers/net/phy/mdio-i2c.h | 19 ++++++++ 4 files changed, 139 insertions(+) create mode 100644 drivers/net/phy/mdio-i2c.c create mode 100644 drivers/net/phy/mdio-i2c.h diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 928fd892f167..a1d6fdba8980 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -106,6 +106,16 @@ config MDIO_HISI_FEMAC This module provides a driver for the MDIO busses found in the Hisilicon SoC that have an Fast Ethernet MAC. +config MDIO_I2C + tristate + depends on I2C + help + Support I2C based PHYs. This provides a MDIO bus bridged + to I2C to allow PHYs connected in I2C mode to be accessed + using the existing infrastructure. + + This is library mode. + config MDIO_MOXART tristate "MOXA ART MDIO interface support" depends on ARCH_MOXART diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 8e9b9f349384..113e8d525c5e 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o +obj-$(CONFIG_MDIO_I2C) += mdio-i2c.o obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o diff --git a/drivers/net/phy/mdio-i2c.c b/drivers/net/phy/mdio-i2c.c new file mode 100644 index 000000000000..6d24fd13ca86 --- /dev/null +++ b/drivers/net/phy/mdio-i2c.c @@ -0,0 +1,109 @@ +/* + * MDIO I2C bridge + * + * Copyright (C) 2015-2016 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Network PHYs can appear on I2C buses when they are part of SFP module. + * This driver exposes these PHYs to the networking PHY code, allowing + * our PHY drivers access to these PHYs, and so allowing configuration + * of their settings. + */ +#include +#include + +#include "mdio-i2c.h" + +/* + * I2C bus addresses 0x50 and 0x51 are normally an EEPROM, which is + * specified to be present in SFP modules. These correspond with PHY + * addresses 16 and 17. Disallow access to these "phy" addresses. + */ +static bool i2c_mii_valid_phy_id(int phy_id) +{ + return phy_id != 0x10 && phy_id != 0x11; +} + +static unsigned int i2c_mii_phy_addr(int phy_id) +{ + return phy_id + 0x40; +} + +static int i2c_mii_read(struct mii_bus *bus, int phy_id, int reg) +{ + struct i2c_adapter *i2c = bus->priv; + struct i2c_msg msgs[2]; + u8 data[2], dev_addr = reg; + int bus_addr, ret; + + if (!i2c_mii_valid_phy_id(phy_id)) + return 0xffff; + + bus_addr = i2c_mii_phy_addr(phy_id); + msgs[0].addr = bus_addr; + msgs[0].flags = 0; + msgs[0].len = 1; + msgs[0].buf = &dev_addr; + msgs[1].addr = bus_addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(data); + msgs[1].buf = data; + + ret = i2c_transfer(i2c, msgs, ARRAY_SIZE(msgs)); + if (ret != ARRAY_SIZE(msgs)) + return 0xffff; + + return data[0] << 8 | data[1]; +} + +static int i2c_mii_write(struct mii_bus *bus, int phy_id, int reg, u16 val) +{ + struct i2c_adapter *i2c = bus->priv; + struct i2c_msg msg; + int ret; + u8 data[3]; + + if (!i2c_mii_valid_phy_id(phy_id)) + return 0; + + data[0] = reg; + data[1] = val >> 8; + data[2] = val; + + msg.addr = i2c_mii_phy_addr(phy_id); + msg.flags = 0; + msg.len = 3; + msg.buf = data; + + ret = i2c_transfer(i2c, &msg, 1); + + return ret < 0 ? ret : 0; +} + +struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c) +{ + struct mii_bus *mii; + + if (!i2c_check_functionality(i2c, I2C_FUNC_I2C)) + return ERR_PTR(-EINVAL); + + mii = mdiobus_alloc(); + if (!mii) + return ERR_PTR(-ENOMEM); + + snprintf(mii->id, MII_BUS_ID_SIZE, "i2c:%s", dev_name(parent)); + mii->parent = parent; + mii->read = i2c_mii_read; + mii->write = i2c_mii_write; + mii->priv = i2c; + + return mii; +} +EXPORT_SYMBOL_GPL(mdio_i2c_alloc); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("MDIO I2C bridge library"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/phy/mdio-i2c.h b/drivers/net/phy/mdio-i2c.h new file mode 100644 index 000000000000..889ab57d7f3e --- /dev/null +++ b/drivers/net/phy/mdio-i2c.h @@ -0,0 +1,19 @@ +/* + * MDIO I2C bridge + * + * Copyright (C) 2015 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef MDIO_I2C_H +#define MDIO_I2C_H + +struct device; +struct i2c_adapter; +struct mii_bus; + +struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c); + +#endif -- cgit From 1834c52166f174c9a77670ef114f0c8a126cb7c2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 22 Sep 2015 20:52:18 +0100 Subject: phylink: add phylink infrastructure The link between the ethernet MAC and its PHY has become more complex as the interface evolves. This is especially true with serdes links, where the part of the PHY is effectively integrated into the MAC. Serdes links can be connected to a variety of devices, including SFF modules soldered down onto the board with the MAC, a SFP cage with a hotpluggable SFP module which may contain a PHY or directly modulate the serdes signals onto optical media with or without a PHY, or even a classical PHY connection. Moreover, the negotiation information on serdes links comes in two varieties - SGMII mode, where the PHY provides its speed/duplex/flow control information to the MAC, and 1000base-X mode where both ends exchange their abilities and each resolve the link capabilities. This means we need a more flexible means to support these arrangements, particularly with the hotpluggable nature of SFP, where the PHY can be attached or detached after the network device has been brought up. Ethtool information can come from multiple sources: - we may have a PHY operating in either SGMII or 1000base-X mode, in which case we take ethtool/mii data directly from the PHY. - we may have a optical SFP module without a PHY, with the MAC operating in 1000base-X mode - the ethtool/mii data needs to come from the MAC. - we may have a copper SFP module with a PHY whic can't be accessed, which means we need to take ethtool/mii data from the MAC. Phylink aims to solve this by providing an intermediary between the MAC and PHY, providing a safe way for PHYs to be hotplugged, and allowing a SFP driver to reconfigure the serdes connection. Phylink also takes over support of fixed link connections, where the speed/duplex/flow control are fixed, but link status may be controlled by a GPIO signal. By avoiding the fixed-phy implementation, phylink can provide a faster response to link events: fixed-phy has to wait for phylib to operate its state machine, which can take several seconds. In comparison, phylink takes milliseconds. Signed-off-by: Russell King - remove sync status - rework supported and advertisment handling - add 1000base-x speed for fixed links - use functionality exported from phy-core, reworking __phylink_ethtool_ksettings_set for it --- drivers/net/phy/Kconfig | 10 + drivers/net/phy/Makefile | 1 + drivers/net/phy/phy_device.c | 1 + drivers/net/phy/phylink.c | 1169 ++++++++++++++++++++++++++++++++++++++++++ include/linux/phy.h | 2 + include/linux/phylink.h | 145 ++++++ 6 files changed, 1328 insertions(+) create mode 100644 drivers/net/phy/phylink.c create mode 100644 include/linux/phylink.h diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index a1d6fdba8980..a0a9e03e2f80 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -169,6 +169,16 @@ menuconfig PHYLIB devices. This option provides infrastructure for managing PHY devices. +config PHYLINK + tristate + depends on NETDEVICES + select PHYLIB + select SWPHY + help + PHYlink models the link between the PHY and MAC, allowing fixed + configuration links, PHYs, and Serdes links with MAC level + autonegotiation modes. + if PHYLIB config SWPHY diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 113e8d525c5e..c43e5b99fda4 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -18,6 +18,7 @@ endif libphy-$(CONFIG_SWPHY) += swphy.o libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_led_triggers.o +obj-$(CONFIG_PHYLINK) += phylink.o obj-$(CONFIG_PHYLIB) += libphy.o obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 32602b8d1524..810f6fd2f639 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1086,6 +1086,7 @@ void phy_detach(struct phy_device *phydev) phydev->attached_dev->phydev = NULL; phydev->attached_dev = NULL; phy_suspend(phydev); + phydev->phylink = NULL; phy_led_triggers_unregister(phydev); diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c new file mode 100644 index 000000000000..af61d7d400af --- /dev/null +++ b/drivers/net/phy/phylink.c @@ -0,0 +1,1169 @@ +/* + * phylink models the MAC to optional PHY connection, supporting + * technologies such as SFP cages where the PHY is hot-pluggable. + * + * Copyright (C) 2015 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "swphy.h" + +#define SUPPORTED_INTERFACES \ + (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE | \ + SUPPORTED_BNC | SUPPORTED_AUI | SUPPORTED_Backplane) +#define ADVERTISED_INTERFACES \ + (ADVERTISED_TP | ADVERTISED_MII | ADVERTISED_FIBRE | \ + ADVERTISED_BNC | ADVERTISED_AUI | ADVERTISED_Backplane) + +enum { + PHYLINK_DISABLE_STOPPED, +}; + +struct phylink { + struct net_device *netdev; + const struct phylink_mac_ops *ops; + + unsigned long phylink_disable_state; /* bitmask of disables */ + struct phy_device *phydev; + phy_interface_t link_interface; /* PHY_INTERFACE_xxx */ + u8 link_an_mode; /* MLO_AN_xxx */ + u8 link_port; /* The current non-phy ethtool port */ + __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); + + /* The link configuration settings */ + struct phylink_link_state link_config; + struct gpio_desc *link_gpio; + + struct mutex state_mutex; + struct phylink_link_state phy_state; + struct work_struct resolve; + + bool mac_link_dropped; +}; + +static inline void linkmode_zero(unsigned long *dst) +{ + bitmap_zero(dst, __ETHTOOL_LINK_MODE_MASK_NBITS); +} + +static inline void linkmode_copy(unsigned long *dst, const unsigned long *src) +{ + bitmap_copy(dst, src, __ETHTOOL_LINK_MODE_MASK_NBITS); +} + +static inline void linkmode_and(unsigned long *dst, const unsigned long *a, + const unsigned long *b) +{ + bitmap_and(dst, a, b, __ETHTOOL_LINK_MODE_MASK_NBITS); +} + +static inline void linkmode_or(unsigned long *dst, const unsigned long *a, + const unsigned long *b) +{ + bitmap_or(dst, a, b, __ETHTOOL_LINK_MODE_MASK_NBITS); +} + +static inline bool linkmode_empty(const unsigned long *src) +{ + return bitmap_empty(src, __ETHTOOL_LINK_MODE_MASK_NBITS); +} + +void phylink_set_port_modes(unsigned long *mask) +{ + phylink_set(mask, TP); + phylink_set(mask, AUI); + phylink_set(mask, MII); + phylink_set(mask, FIBRE); + phylink_set(mask, BNC); + phylink_set(mask, Backplane); +} +EXPORT_SYMBOL_GPL(phylink_set_port_modes); + +static int phylink_is_empty_linkmode(const unsigned long *linkmode) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(tmp) = { 0, }; + + phylink_set_port_modes(tmp); + phylink_set(tmp, Autoneg); + phylink_set(tmp, Pause); + phylink_set(tmp, Asym_Pause); + + bitmap_andnot(tmp, linkmode, tmp, __ETHTOOL_LINK_MODE_MASK_NBITS); + + return linkmode_empty(tmp); +} + +static const char *phylink_an_mode_str(unsigned int mode) +{ + static const char *modestr[] = { + [MLO_AN_PHY] = "phy", + [MLO_AN_FIXED] = "fixed", + [MLO_AN_SGMII] = "SGMII", + [MLO_AN_8023Z] = "802.3z", + }; + + return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown"; +} + +static int phylink_validate(struct phylink *pl, unsigned long *supported, + struct phylink_link_state *state) +{ + pl->ops->validate(pl->netdev, supported, state); + + return phylink_is_empty_linkmode(supported) ? -EINVAL : 0; +} + +static int phylink_parse_fixedlink(struct phylink *pl, struct device_node *np) +{ + struct device_node *fixed_node; + const struct phy_setting *s; + struct gpio_desc *desc; + const __be32 *fixed_prop; + u32 speed; + int ret, len; + + fixed_node = of_get_child_by_name(np, "fixed-link"); + if (fixed_node) { + ret = of_property_read_u32(fixed_node, "speed", &speed); + + pl->link_config.speed = speed; + pl->link_config.duplex = DUPLEX_HALF; + + if (of_property_read_bool(fixed_node, "full-duplex")) + pl->link_config.duplex = DUPLEX_FULL; + + /* We treat the "pause" and "asym-pause" terminology as + * defining the link partner's ability. */ + if (of_property_read_bool(fixed_node, "pause")) + pl->link_config.pause |= MLO_PAUSE_SYM; + if (of_property_read_bool(fixed_node, "asym-pause")) + pl->link_config.pause |= MLO_PAUSE_ASYM; + + if (ret == 0) { + desc = fwnode_get_named_gpiod(&fixed_node->fwnode, + "link-gpios", 0, + GPIOD_IN, "?"); + + if (!IS_ERR(desc)) + pl->link_gpio = desc; + else if (desc == ERR_PTR(-EPROBE_DEFER)) + ret = -EPROBE_DEFER; + } + of_node_put(fixed_node); + + if (ret) + return ret; + } else { + fixed_prop = of_get_property(np, "fixed-link", &len); + if (!fixed_prop) { + netdev_err(pl->netdev, "broken fixed-link?\n"); + return -EINVAL; + } + if (len == 5 * sizeof(*fixed_prop)) { + pl->link_config.duplex = be32_to_cpu(fixed_prop[1]) ? + DUPLEX_FULL : DUPLEX_HALF; + pl->link_config.speed = be32_to_cpu(fixed_prop[2]); + if (be32_to_cpu(fixed_prop[3])) + pl->link_config.pause |= MLO_PAUSE_SYM; + if (be32_to_cpu(fixed_prop[4])) + pl->link_config.pause |= MLO_PAUSE_ASYM; + } + } + + if (pl->link_config.speed > SPEED_1000 && + pl->link_config.duplex != DUPLEX_FULL) + netdev_warn(pl->netdev, "fixed link specifies half duplex for %dMbps link?\n", + pl->link_config.speed); + + bitmap_fill(pl->supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + linkmode_copy(pl->link_config.advertising, pl->supported); + phylink_validate(pl, pl->supported, &pl->link_config); + + s = phy_lookup_setting(pl->link_config.speed, pl->link_config.duplex, + pl->supported, + __ETHTOOL_LINK_MODE_MASK_NBITS, true); + linkmode_zero(pl->supported); + phylink_set(pl->supported, MII); + if (s) { + __set_bit(s->bit, pl->supported); + } else { + netdev_warn(pl->netdev, "fixed link %s duplex %dMbps not recognised\n", + pl->link_config.duplex == DUPLEX_FULL ? "full" : "half", + pl->link_config.speed); + } + + linkmode_and(pl->link_config.advertising, pl->link_config.advertising, + pl->supported); + + pl->link_config.link = 1; + pl->link_config.an_complete = 1; + + return 0; +} + +static int phylink_parse_mode(struct phylink *pl, struct device_node *np) +{ + struct device_node *dn; + const char *managed; + + dn = of_get_child_by_name(np, "fixed-link"); + if (dn || of_find_property(np, "fixed-link", NULL)) + pl->link_an_mode = MLO_AN_FIXED; + of_node_put(dn); + + if (of_property_read_string(np, "managed", &managed) == 0 && + strcmp(managed, "in-band-status") == 0) { + if (pl->link_an_mode == MLO_AN_FIXED) { + netdev_err(pl->netdev, + "can't use both fixed-link and in-band-status\n"); + return -EINVAL; + } + + linkmode_zero(pl->supported); + phylink_set(pl->supported, MII); + phylink_set(pl->supported, Autoneg); + phylink_set(pl->supported, Asym_Pause); + phylink_set(pl->supported, Pause); + pl->link_config.an_enabled = true; + + switch (pl->link_config.interface) { + case PHY_INTERFACE_MODE_SGMII: + phylink_set(pl->supported, 10baseT_Half); + phylink_set(pl->supported, 10baseT_Full); + phylink_set(pl->supported, 100baseT_Half); + phylink_set(pl->supported, 100baseT_Full); + phylink_set(pl->supported, 1000baseT_Half); + phylink_set(pl->supported, 1000baseT_Full); + pl->link_an_mode = MLO_AN_SGMII; + break; + + case PHY_INTERFACE_MODE_1000BASEX: + phylink_set(pl->supported, 1000baseX_Full); + pl->link_an_mode = MLO_AN_8023Z; + break; + + case PHY_INTERFACE_MODE_2500BASEX: + phylink_set(pl->supported, 2500baseX_Full); + pl->link_an_mode = MLO_AN_8023Z; + break; + + default: + netdev_err(pl->netdev, + "incorrect link mode %s for in-band status\n", + phy_modes(pl->link_config.interface)); + return -EINVAL; + } + + linkmode_copy(pl->link_config.advertising, pl->supported); + + if (phylink_validate(pl, pl->supported, &pl->link_config)) { + netdev_err(pl->netdev, + "failed to validate link configuration for in-band status\n"); + return -EINVAL; + } + } + + return 0; +} + +static void phylink_mac_config(struct phylink *pl, + const struct phylink_link_state *state) +{ + netdev_dbg(pl->netdev, + "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n", + __func__, phylink_an_mode_str(pl->link_an_mode), + phy_modes(state->interface), + phy_speed_to_str(state->speed), + phy_duplex_to_str(state->duplex), + __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising, + state->pause, state->link, state->an_enabled); + + pl->ops->mac_config(pl->netdev, pl->link_an_mode, state); +} + +static void phylink_mac_an_restart(struct phylink *pl) +{ + if (pl->link_config.an_enabled && + (pl->link_config.interface == PHY_INTERFACE_MODE_1000BASEX || + pl->link_config.interface == PHY_INTERFACE_MODE_2500BASEX)) + pl->ops->mac_an_restart(pl->netdev); +} + +static int phylink_get_mac_state(struct phylink *pl, struct phylink_link_state *state) +{ + struct net_device *ndev = pl->netdev; + + linkmode_copy(state->advertising, pl->link_config.advertising); + linkmode_zero(state->lp_advertising); + state->interface = pl->link_config.interface; + state->an_enabled = pl->link_config.an_enabled; + state->link = 1; + + return pl->ops->mac_link_state(ndev, state); +} + +/* The fixed state is... fixed except for the link state, + * which may be determined by a GPIO. + */ +static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_state *state) +{ + *state = pl->link_config; + if (pl->link_gpio) + state->link = !!gpiod_get_value(pl->link_gpio); +} + +/* Flow control is resolved according to our and the link partners + * advertisments using the following drawn from the 802.3 specs: + * Local device Link partner + * Pause AsymDir Pause AsymDir Result + * 1 X 1 X TX+RX + * 0 1 1 1 RX + * 1 1 0 1 TX + */ +static void phylink_resolve_flow(struct phylink *pl, + struct phylink_link_state *state) +{ + int new_pause = 0; + + if (pl->link_config.pause & MLO_PAUSE_AN) { + int pause = 0; + + if (phylink_test(pl->link_config.advertising, Pause)) + pause |= MLO_PAUSE_SYM; + if (phylink_test(pl->link_config.advertising, Asym_Pause)) + pause |= MLO_PAUSE_ASYM; + + pause &= state->pause; + + if (pause & MLO_PAUSE_SYM) + new_pause = MLO_PAUSE_TX | MLO_PAUSE_RX; + else if (pause & MLO_PAUSE_ASYM) + new_pause = state->pause & MLO_PAUSE_SYM ? + MLO_PAUSE_RX : MLO_PAUSE_TX; + } else { + new_pause = pl->link_config.pause & MLO_PAUSE_TXRX_MASK; + } + + state->pause &= ~MLO_PAUSE_TXRX_MASK; + state->pause |= new_pause; +} + +static const char *phylink_pause_to_str(int pause) +{ + switch (pause & MLO_PAUSE_TXRX_MASK) { + case MLO_PAUSE_TX | MLO_PAUSE_RX: + return "rx/tx"; + case MLO_PAUSE_TX: + return "tx"; + case MLO_PAUSE_RX: + return "rx"; + default: + return "off"; + } +} + +static void phylink_resolve(struct work_struct *w) +{ + struct phylink *pl = container_of(w, struct phylink, resolve); + struct phylink_link_state link_state; + struct net_device *ndev = pl->netdev; + + mutex_lock(&pl->state_mutex); + if (pl->phylink_disable_state) { + pl->mac_link_dropped = false; + link_state.link = false; + } else if (pl->mac_link_dropped) { + link_state.link = false; + } else { + switch (pl->link_an_mode) { + case MLO_AN_PHY: + link_state = pl->phy_state; + phylink_resolve_flow(pl, &link_state); + phylink_mac_config(pl, &link_state); + break; + + case MLO_AN_FIXED: + phylink_get_fixed_state(pl, &link_state); + phylink_mac_config(pl, &link_state); + break; + + case MLO_AN_SGMII: + phylink_get_mac_state(pl, &link_state); + if (pl->phydev) { + bool changed = false; + + link_state.link = link_state.link && + pl->phy_state.link; + + if (pl->phy_state.interface != + link_state.interface) { + link_state.interface = pl->phy_state.interface; + changed = true; + } + + /* Propagate the flow control from the PHY + * to the MAC. Also propagate the interface + * if changed. + */ + if (pl->phy_state.link || changed) { + link_state.pause |= pl->phy_state.pause; + phylink_resolve_flow(pl, &link_state); + + phylink_mac_config(pl, &link_state); + } + } + break; + + case MLO_AN_8023Z: + phylink_get_mac_state(pl, &link_state); + break; + } + } + + if (link_state.link != netif_carrier_ok(ndev)) { + if (!link_state.link) { + netif_carrier_off(ndev); + pl->ops->mac_link_down(ndev, pl->link_an_mode); + netdev_info(ndev, "Link is Down\n"); + } else { + pl->ops->mac_link_up(ndev, pl->link_an_mode, + pl->phydev); + + netif_carrier_on(ndev); + + netdev_info(ndev, + "Link is Up - %s/%s - flow control %s\n", + phy_speed_to_str(link_state.speed), + phy_duplex_to_str(link_state.duplex), + phylink_pause_to_str(link_state.pause)); + } + } + if (!link_state.link && pl->mac_link_dropped) { + pl->mac_link_dropped = false; + queue_work(system_power_efficient_wq, &pl->resolve); + } + mutex_unlock(&pl->state_mutex); +} + +static void phylink_run_resolve(struct phylink *pl) +{ + if (!pl->phylink_disable_state) + queue_work(system_power_efficient_wq, &pl->resolve); +} + +struct phylink *phylink_create(struct net_device *ndev, struct device_node *np, + phy_interface_t iface, const struct phylink_mac_ops *ops) +{ + struct phylink *pl; + int ret; + + pl = kzalloc(sizeof(*pl), GFP_KERNEL); + if (!pl) + return ERR_PTR(-ENOMEM); + + mutex_init(&pl->state_mutex); + INIT_WORK(&pl->resolve, phylink_resolve); + pl->netdev = ndev; + pl->phy_state.interface = iface; + pl->link_interface = iface; + pl->link_port = PORT_MII; + pl->link_config.interface = iface; + pl->link_config.pause = MLO_PAUSE_AN; + pl->link_config.speed = SPEED_UNKNOWN; + pl->link_config.duplex = DUPLEX_UNKNOWN; + pl->ops = ops; + __set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); + + bitmap_fill(pl->supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + linkmode_copy(pl->link_config.advertising, pl->supported); + phylink_validate(pl, pl->supported, &pl->link_config); + + ret = phylink_parse_mode(pl, np); + if (ret < 0) { + kfree(pl); + return ERR_PTR(ret); + } + + if (pl->link_an_mode == MLO_AN_FIXED) { + ret = phylink_parse_fixedlink(pl, np); + if (ret < 0) { + kfree(pl); + return ERR_PTR(ret); + } + } + + return pl; +} +EXPORT_SYMBOL_GPL(phylink_create); + +void phylink_destroy(struct phylink *pl) +{ + cancel_work_sync(&pl->resolve); + kfree(pl); +} +EXPORT_SYMBOL_GPL(phylink_destroy); + +void phylink_phy_change(struct phy_device *phydev, bool up, bool do_carrier) +{ + struct phylink *pl = phydev->phylink; + + mutex_lock(&pl->state_mutex); + pl->phy_state.speed = phydev->speed; + pl->phy_state.duplex = phydev->duplex; + pl->phy_state.pause = MLO_PAUSE_NONE; + if (phydev->pause) + pl->phy_state.pause |= MLO_PAUSE_SYM; + if (phydev->asym_pause) + pl->phy_state.pause |= MLO_PAUSE_ASYM; + pl->phy_state.interface = phydev->interface; + pl->phy_state.link = up; + mutex_unlock(&pl->state_mutex); + + phylink_run_resolve(pl); + + netdev_dbg(pl->netdev, "phy link %s %s/%s/%s\n", up ? "up" : "down", + phy_modes(phydev->interface), + phy_speed_to_str(phydev->speed), + phy_duplex_to_str(phydev->duplex)); +} + +static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy) +{ + struct phylink_link_state config; + __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); + u32 advertising; + int ret; + + memset(&config, 0, sizeof(config)); + ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported); + ethtool_convert_legacy_u32_to_link_mode(config.advertising, + phy->advertising); + config.interface = pl->link_config.interface; + + /* + * This is the new way of dealing with flow control for PHYs, + * as described by Timur Tabi in commit 529ed1275263 ("net: phy: + * phy drivers should not set SUPPORTED_[Asym_]Pause") except + * using our validate call to the MAC, we rely upon the MAC + * clearing the bits from both supported and advertising fields. + */ + if (phylink_test(supported, Pause)) + phylink_set(config.advertising, Pause); + if (phylink_test(supported, Asym_Pause)) + phylink_set(config.advertising, Asym_Pause); + + ret = phylink_validate(pl, supported, &config); + if (ret) + return ret; + + phy->phylink = pl; + phy->phy_link_change = phylink_phy_change; + + netdev_info(pl->netdev, + "PHY [%s] driver [%s]\n", dev_name(&phy->mdio.dev), + phy->drv->name); + + mutex_lock(&phy->lock); + mutex_lock(&pl->state_mutex); + pl->netdev->phydev = phy; + pl->phydev = phy; + linkmode_copy(pl->supported, supported); + linkmode_copy(pl->link_config.advertising, config.advertising); + + /* Restrict the phy advertisment according to the MAC support. */ + ethtool_convert_link_mode_to_legacy_u32(&advertising, config.advertising); + phy->advertising = advertising; + mutex_unlock(&pl->state_mutex); + mutex_unlock(&phy->lock); + + netdev_dbg(pl->netdev, + "phy: setting supported %*pb advertising 0x%08x\n", + __ETHTOOL_LINK_MODE_MASK_NBITS, pl->supported, + phy->advertising); + + phy_start_machine(phy); + if (phy->irq > 0) + phy_start_interrupts(phy); + + return 0; +} + +int phylink_connect_phy(struct phylink *pl, struct phy_device *phy) +{ + int ret; + + ret = phy_attach_direct(pl->netdev, phy, 0, pl->link_interface); + if (ret) + return ret; + + ret = phylink_bringup_phy(pl, phy); + if (ret) + phy_detach(phy); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_connect_phy); + +int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn) +{ + struct device_node *phy_node; + struct phy_device *phy_dev; + int ret; + + /* Fixed links are handled without needing a PHY */ + if (pl->link_an_mode == MLO_AN_FIXED) + return 0; + + phy_node = of_parse_phandle(dn, "phy-handle", 0); + if (!phy_node) + phy_node = of_parse_phandle(dn, "phy", 0); + if (!phy_node) + phy_node = of_parse_phandle(dn, "phy-device", 0); + + if (!phy_node) { + if (pl->link_an_mode == MLO_AN_PHY) { + netdev_err(pl->netdev, "unable to find PHY node\n"); + return -ENODEV; + } + return 0; + } + + phy_dev = of_phy_attach(pl->netdev, phy_node, 0, pl->link_interface); + /* We're done with the phy_node handle */ + of_node_put(phy_node); + + if (!phy_dev) + return -ENODEV; + + ret = phylink_bringup_phy(pl, phy_dev); + if (ret) + phy_detach(phy_dev); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_of_phy_connect); + +void phylink_disconnect_phy(struct phylink *pl) +{ + struct phy_device *phy; + + WARN_ON(!lockdep_rtnl_is_held()); + + phy = pl->phydev; + if (phy) { + mutex_lock(&phy->lock); + mutex_lock(&pl->state_mutex); + pl->netdev->phydev = NULL; + pl->phydev = NULL; + mutex_unlock(&pl->state_mutex); + mutex_unlock(&phy->lock); + flush_work(&pl->resolve); + + phy_disconnect(phy); + } +} +EXPORT_SYMBOL_GPL(phylink_disconnect_phy); + +void phylink_mac_change(struct phylink *pl, bool up) +{ + if (!up) + pl->mac_link_dropped = true; + phylink_run_resolve(pl); + netdev_dbg(pl->netdev, "mac link %s\n", up ? "up" : "down"); +} +EXPORT_SYMBOL_GPL(phylink_mac_change); + +void phylink_start(struct phylink *pl) +{ + WARN_ON(!lockdep_rtnl_is_held()); + + netdev_info(pl->netdev, "configuring for %s/%s link mode\n", + phylink_an_mode_str(pl->link_an_mode), + phy_modes(pl->link_config.interface)); + + /* Apply the link configuration to the MAC when starting. This allows + * a fixed-link to start with the correct parameters, and also + * ensures that we set the appropriate advertisment for Serdes links. + */ + phylink_resolve_flow(pl, &pl->link_config); + phylink_mac_config(pl, &pl->link_config); + + clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); + phylink_run_resolve(pl); + + if (pl->phydev) + phy_start(pl->phydev); +} +EXPORT_SYMBOL_GPL(phylink_start); + +void phylink_stop(struct phylink *pl) +{ + WARN_ON(!lockdep_rtnl_is_held()); + + if (pl->phydev) + phy_stop(pl->phydev); + + set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); + flush_work(&pl->resolve); +} +EXPORT_SYMBOL_GPL(phylink_stop); + +void phylink_ethtool_get_wol(struct phylink *pl, struct ethtool_wolinfo *wol) +{ + WARN_ON(!lockdep_rtnl_is_held()); + + wol->supported = 0; + wol->wolopts = 0; + + if (pl->phydev) + phy_ethtool_get_wol(pl->phydev, wol); +} +EXPORT_SYMBOL_GPL(phylink_ethtool_get_wol); + +int phylink_ethtool_set_wol(struct phylink *pl, struct ethtool_wolinfo *wol) +{ + int ret = -EOPNOTSUPP; + + WARN_ON(!lockdep_rtnl_is_held()); + + if (pl->phydev) + ret = phy_ethtool_set_wol(pl->phydev, wol); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_set_wol); + +static void phylink_merge_link_mode(unsigned long *dst, const unsigned long *b) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask); + + linkmode_zero(mask); + phylink_set_port_modes(mask); + + linkmode_and(dst, dst, mask); + linkmode_or(dst, dst, b); +} + +static void phylink_get_ksettings(const struct phylink_link_state *state, + struct ethtool_link_ksettings *kset) +{ + phylink_merge_link_mode(kset->link_modes.advertising, state->advertising); + linkmode_copy(kset->link_modes.lp_advertising, state->lp_advertising); + kset->base.speed = state->speed; + kset->base.duplex = state->duplex; + kset->base.autoneg = state->an_enabled ? AUTONEG_ENABLE : + AUTONEG_DISABLE; +} + +int phylink_ethtool_ksettings_get(struct phylink *pl, + struct ethtool_link_ksettings *kset) +{ + struct phylink_link_state link_state; + + WARN_ON(!lockdep_rtnl_is_held()); + + if (pl->phydev) { + phy_ethtool_ksettings_get(pl->phydev, kset); + } else { + kset->base.port = pl->link_port; + } + + linkmode_copy(kset->link_modes.supported, pl->supported); + + switch (pl->link_an_mode) { + case MLO_AN_FIXED: + /* We are using fixed settings. Report these as the + * current link settings - and note that these also + * represent the supported speeds/duplex/pause modes. + */ + phylink_get_fixed_state(pl, &link_state); + phylink_get_ksettings(&link_state, kset); + break; + + case MLO_AN_SGMII: + /* If there is a phy attached, then use the reported + * settings from the phy with no modification. + */ + if (pl->phydev) + break; + + case MLO_AN_8023Z: + phylink_get_mac_state(pl, &link_state); + + /* The MAC is reporting the link results from its own PCS + * layer via in-band status. Report these as the current + * link settings. + */ + phylink_get_ksettings(&link_state, kset); + break; + } + + return 0; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_get); + +int phylink_ethtool_ksettings_set(struct phylink *pl, + const struct ethtool_link_ksettings *kset) +{ + struct ethtool_link_ksettings our_kset; + struct phylink_link_state config; + int ret; + + WARN_ON(!lockdep_rtnl_is_held()); + + if (kset->base.autoneg != AUTONEG_DISABLE && + kset->base.autoneg != AUTONEG_ENABLE) + return -EINVAL; + + config = pl->link_config; + + /* Mask out unsupported advertisments */ + linkmode_and(config.advertising, kset->link_modes.advertising, + pl->supported); + + /* FIXME: should we reject autoneg if phy/mac does not support it? */ + if (kset->base.autoneg == AUTONEG_DISABLE) { + const struct phy_setting *s; + + /* Autonegotiation disabled, select a suitable speed and + * duplex. + */ + s = phy_lookup_setting(kset->base.speed, kset->base.duplex, + pl->supported, + __ETHTOOL_LINK_MODE_MASK_NBITS, false); + if (!s) + return -EINVAL; + + /* If we have a fixed link (as specified by firmware), refuse + * to change link parameters. + */ + if (pl->link_an_mode == MLO_AN_FIXED && + (s->speed != pl->link_config.speed || + s->duplex != pl->link_config.duplex)) + return -EINVAL; + + config.speed = s->speed; + config.duplex = s->duplex; + config.an_enabled = false; + + __clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising); + } else { + /* If we have a fixed link, refuse to enable autonegotiation */ + if (pl->link_an_mode == MLO_AN_FIXED) + return -EINVAL; + + config.speed = SPEED_UNKNOWN; + config.duplex = DUPLEX_UNKNOWN; + config.an_enabled = true; + + __set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising); + } + + if (phylink_validate(pl, pl->supported, &config)) + return -EINVAL; + + /* If autonegotiation is enabled, we must have an advertisment */ + if (config.an_enabled && phylink_is_empty_linkmode(config.advertising)) + return -EINVAL; + + our_kset = *kset; + linkmode_copy(our_kset.link_modes.advertising, config.advertising); + our_kset.base.speed = config.speed; + our_kset.base.duplex = config.duplex; + + /* If we have a PHY, configure the phy */ + if (pl->phydev) { + ret = phy_ethtool_ksettings_set(pl->phydev, &our_kset); + if (ret) + return ret; + } + + mutex_lock(&pl->state_mutex); + /* Configure the MAC to match the new settings */ + linkmode_copy(pl->link_config.advertising, our_kset.link_modes.advertising); + pl->link_config.speed = our_kset.base.speed; + pl->link_config.duplex = our_kset.base.duplex; + pl->link_config.an_enabled = our_kset.base.autoneg != AUTONEG_DISABLE; + + if (!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) { + phylink_mac_config(pl, &pl->link_config); + phylink_mac_an_restart(pl); + } + mutex_unlock(&pl->state_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_set); + +int phylink_ethtool_nway_reset(struct phylink *pl) +{ + int ret = 0; + + WARN_ON(!lockdep_rtnl_is_held()); + + if (pl->phydev) + ret = phy_restart_aneg(pl->phydev); + phylink_mac_an_restart(pl); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_nway_reset); + +void phylink_ethtool_get_pauseparam(struct phylink *pl, + struct ethtool_pauseparam *pause) +{ + WARN_ON(!lockdep_rtnl_is_held()); + + pause->autoneg = !!(pl->link_config.pause & MLO_PAUSE_AN); + pause->rx_pause = !!(pl->link_config.pause & MLO_PAUSE_RX); + pause->tx_pause = !!(pl->link_config.pause & MLO_PAUSE_TX); +} +EXPORT_SYMBOL_GPL(phylink_ethtool_get_pauseparam); + +int phylink_ethtool_set_pauseparam(struct phylink *pl, + struct ethtool_pauseparam *pause) +{ + struct phylink_link_state *config = &pl->link_config; + + WARN_ON(!lockdep_rtnl_is_held()); + + if (!phylink_test(pl->supported, Pause) && + !phylink_test(pl->supported, Asym_Pause)) + return -EOPNOTSUPP; + + if (!phylink_test(pl->supported, Asym_Pause) && + !pause->autoneg && pause->rx_pause != pause->tx_pause) + return -EINVAL; + + config->pause &= ~(MLO_PAUSE_AN | MLO_PAUSE_TXRX_MASK); + + if (pause->autoneg) + config->pause |= MLO_PAUSE_AN; + if (pause->rx_pause) + config->pause |= MLO_PAUSE_RX; + if (pause->tx_pause) + config->pause |= MLO_PAUSE_TX; + + if (!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) { + switch (pl->link_an_mode) { + case MLO_AN_PHY: + /* Silently mark the carrier down, and then trigger a resolve */ + netif_carrier_off(pl->netdev); + phylink_run_resolve(pl); + break; + + case MLO_AN_FIXED: + /* Should we allow fixed links to change against the config? */ + phylink_resolve_flow(pl, config); + phylink_mac_config(pl, config); + break; + + case MLO_AN_SGMII: + case MLO_AN_8023Z: + phylink_mac_config(pl, config); + phylink_mac_an_restart(pl); + break; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam); + +int phylink_init_eee(struct phylink *pl, bool clk_stop_enable) +{ + int ret = -EPROTONOSUPPORT; + + WARN_ON(!lockdep_rtnl_is_held()); + + if (pl->phydev) + ret = phy_init_eee(pl->phydev, clk_stop_enable); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_init_eee); + +int phylink_get_eee_err(struct phylink *pl) +{ + int ret = 0; + + WARN_ON(!lockdep_rtnl_is_held()); + + if (pl->phydev) + ret = phy_get_eee_err(pl->phydev); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_get_eee_err); + +int phylink_ethtool_get_eee(struct phylink *pl, struct ethtool_eee *eee) +{ + int ret = -EOPNOTSUPP; + + WARN_ON(!lockdep_rtnl_is_held()); + + if (pl->phydev) + ret = phy_ethtool_get_eee(pl->phydev, eee); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_get_eee); + +int phylink_ethtool_set_eee(struct phylink *pl, struct ethtool_eee *eee) +{ + int ret = -EOPNOTSUPP; + + WARN_ON(!lockdep_rtnl_is_held()); + + if (pl->phydev) + ret = phy_ethtool_set_eee(pl->phydev, eee); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_set_eee); + +/* This emulates MII registers for a fixed-mode phy operating as per the + * passed in state. "aneg" defines if we report negotiation is possible. + * + * FIXME: should deal with negotiation state too. + */ +static int phylink_mii_emul_read(struct net_device *ndev, unsigned int reg, + struct phylink_link_state *state, bool aneg) +{ + struct fixed_phy_status fs; + int val; + + fs.link = state->link; + fs.speed = state->speed; + fs.duplex = state->duplex; + fs.pause = state->pause & MLO_PAUSE_SYM; + fs.asym_pause = state->pause & MLO_PAUSE_ASYM; + + val = swphy_read_reg(reg, &fs); + if (reg == MII_BMSR) { + if (!state->an_complete) + val &= ~BMSR_ANEGCOMPLETE; + if (!aneg) + val &= ~BMSR_ANEGCAPABLE; + } + return val; +} + +static int phylink_mii_read(struct phylink *pl, unsigned int phy_id, + unsigned int reg) +{ + struct phylink_link_state state; + int val = 0xffff; + + /* PHYs only exist for MLO_AN_PHY and MLO_AN_SGMII */ + if (pl->phydev) + return mdiobus_read(pl->phydev->mdio.bus, phy_id, reg); + + switch (pl->link_an_mode) { + case MLO_AN_FIXED: + if (phy_id == 0) { + phylink_get_fixed_state(pl, &state); + val = phylink_mii_emul_read(pl->netdev, reg, &state, + true); + } + break; + + case MLO_AN_PHY: + return -EOPNOTSUPP; + + case MLO_AN_SGMII: + /* No phy, fall through to 8023z method */ + case MLO_AN_8023Z: + if (phy_id == 0) { + val = phylink_get_mac_state(pl, &state); + if (val < 0) + return val; + + val = phylink_mii_emul_read(pl->netdev, reg, &state, + true); + } + break; + } + + return val & 0xffff; +} + +static int phylink_mii_write(struct phylink *pl, unsigned int phy_id, + unsigned int reg, unsigned int val) +{ + /* PHYs only exist for MLO_AN_PHY and MLO_AN_SGMII */ + if (pl->phydev) { + mdiobus_write(pl->phydev->mdio.bus, phy_id, reg, val); + return 0; + } + + switch (pl->link_an_mode) { + case MLO_AN_FIXED: + break; + + case MLO_AN_PHY: + return -EOPNOTSUPP; + + case MLO_AN_SGMII: + /* No phy, fall through to 8023z method */ + case MLO_AN_8023Z: + break; + } + + return 0; +} + +int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd) +{ + struct mii_ioctl_data *mii_data = if_mii(ifr); + int val, ret; + + WARN_ON(!lockdep_rtnl_is_held()); + + switch (cmd) { + case SIOCGMIIPHY: + mii_data->phy_id = pl->phydev ? pl->phydev->mdio.addr : 0; + /* fallthrough */ + + case SIOCGMIIREG: + val = phylink_mii_read(pl, mii_data->phy_id, mii_data->reg_num); + if (val < 0) { + ret = val; + } else { + mii_data->val_out = val; + ret = 0; + } + break; + + case SIOCSMIIREG: + ret = phylink_mii_write(pl, mii_data->phy_id, mii_data->reg_num, + mii_data->val_in); + break; + + default: + ret = -EOPNOTSUPP; + if (pl->phydev) + ret = phy_mii_ioctl(pl->phydev, ifr, cmd); + break; + } + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_mii_ioctl); + +MODULE_LICENSE("GPL"); diff --git a/include/linux/phy.h b/include/linux/phy.h index 0a5e8e62c9e0..d78cd01ea513 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -182,6 +182,7 @@ static inline const char *phy_modes(phy_interface_t interface) #define MII_ADDR_C45 (1<<30) struct device; +struct phylink; struct sk_buff; /* @@ -469,6 +470,7 @@ struct phy_device { struct mutex lock; + struct phylink *phylink; struct net_device *attached_dev; u8 mdix; diff --git a/include/linux/phylink.h b/include/linux/phylink.h new file mode 100644 index 000000000000..76f054f39684 --- /dev/null +++ b/include/linux/phylink.h @@ -0,0 +1,145 @@ +#ifndef NETDEV_PCS_H +#define NETDEV_PCS_H + +#include +#include +#include + +struct device_node; +struct ethtool_cmd; +struct net_device; + +enum { + MLO_PAUSE_NONE, + MLO_PAUSE_ASYM = BIT(0), + MLO_PAUSE_SYM = BIT(1), + MLO_PAUSE_RX = BIT(2), + MLO_PAUSE_TX = BIT(3), + MLO_PAUSE_TXRX_MASK = MLO_PAUSE_TX | MLO_PAUSE_RX, + MLO_PAUSE_AN = BIT(4), + + MLO_AN_PHY = 0, /* Conventional PHY */ + MLO_AN_FIXED, /* Fixed-link mode */ + MLO_AN_SGMII, /* Cisco SGMII protocol */ + MLO_AN_8023Z, /* 1000base-X protocol */ +}; + +static inline bool phylink_autoneg_inband(unsigned int mode) +{ + return mode == MLO_AN_SGMII || mode == MLO_AN_8023Z; +} + +struct phylink_link_state { + __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising); + __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising); + phy_interface_t interface; /* PHY_INTERFACE_xxx */ + int speed; + int duplex; + int pause; + unsigned int link:1; + unsigned int an_enabled:1; + unsigned int an_complete:1; +}; + +struct phylink_mac_ops { + /** + * validate: validate and update the link configuration + * @ndev: net_device structure associated with MAC + * @config: configuration to validate + * + * Update the %config->supported and %config->advertised masks + * clearing bits that can not be supported. + * + * Note: the PHY may be able to transform from one connection + * technology to another, so, eg, don't clear 1000BaseX just + * because the MAC is unable to support it. This is more about + * clearing unsupported speeds and duplex settings. + * + * If the %config->interface mode is %PHY_INTERFACE_MODE_1000BASEX + * or %PHY_INTERFACE_MODE_2500BASEX, select the appropriate mode + * based on %config->advertised and/or %config->speed. + */ + void (*validate)(struct net_device *ndev, unsigned long *supported, + struct phylink_link_state *state); + + /* Read the current link state from the hardware */ + int (*mac_link_state)(struct net_device *, struct phylink_link_state *); + + /* Configure the MAC */ + /** + * mac_config: configure the MAC for the selected mode and state + * @ndev: net_device structure for the MAC + * @mode: one of MLO_AN_FIXED, MLO_AN_PHY, MLO_AN_8023Z, MLO_AN_SGMII + * @state: state structure + * + * The action performed depends on the currently selected mode: + * + * %MLO_AN_FIXED, %MLO_AN_PHY: + * set the specified speed, duplex, pause mode, and phy interface + * mode in the provided @state. + * %MLO_AN_8023Z: + * place the link in 1000base-X mode, advertising the parameters + * given in advertising in @state. + * %MLO_AN_SGMII: + * place the link in Cisco SGMII mode - there is no advertisment + * to make as the PHY communicates the speed and duplex to the + * MAC over the in-band control word. Configuration of the pause + * mode is as per MLO_AN_PHY since this is not included. + */ + void (*mac_config)(struct net_device *ndev, unsigned int mode, + const struct phylink_link_state *state); + + /** + * mac_an_restart: restart 802.3z BaseX autonegotiation + * @ndev: net_device structure for the MAC + */ + void (*mac_an_restart)(struct net_device *ndev); + + void (*mac_link_down)(struct net_device *, unsigned int mode); + void (*mac_link_up)(struct net_device *, unsigned int mode, + struct phy_device *); +}; + +struct phylink *phylink_create(struct net_device *, struct device_node *, + phy_interface_t iface, const struct phylink_mac_ops *ops); +void phylink_destroy(struct phylink *); + +int phylink_connect_phy(struct phylink *, struct phy_device *); +int phylink_of_phy_connect(struct phylink *, struct device_node *); +void phylink_disconnect_phy(struct phylink *); + +void phylink_mac_change(struct phylink *, bool up); + +void phylink_start(struct phylink *); +void phylink_stop(struct phylink *); + +void phylink_ethtool_get_wol(struct phylink *, struct ethtool_wolinfo *); +int phylink_ethtool_set_wol(struct phylink *, struct ethtool_wolinfo *); + +int phylink_ethtool_ksettings_get(struct phylink *, + struct ethtool_link_ksettings *); +int phylink_ethtool_ksettings_set(struct phylink *, + const struct ethtool_link_ksettings *); +int phylink_ethtool_nway_reset(struct phylink *); +void phylink_ethtool_get_pauseparam(struct phylink *, + struct ethtool_pauseparam *); +int phylink_ethtool_set_pauseparam(struct phylink *, + struct ethtool_pauseparam *); +int phylink_init_eee(struct phylink *, bool); +int phylink_get_eee_err(struct phylink *); +int phylink_ethtool_get_eee(struct phylink *, struct ethtool_eee *); +int phylink_ethtool_set_eee(struct phylink *, struct ethtool_eee *); +int phylink_mii_ioctl(struct phylink *, struct ifreq *, int); + +#define phylink_zero(bm) \ + bitmap_zero(bm, __ETHTOOL_LINK_MODE_MASK_NBITS) +#define __phylink_do_bit(op, bm, mode) \ + op(ETHTOOL_LINK_MODE_ ## mode ## _BIT, bm) + +#define phylink_set(bm, mode) __phylink_do_bit(__set_bit, bm, mode) +#define phylink_clear(bm, mode) __phylink_do_bit(__clear_bit, bm, mode) +#define phylink_test(bm, mode) __phylink_do_bit(test_bit, bm, mode) + +void phylink_set_port_modes(unsigned long *bits); + +#endif -- cgit From 58f662a5765d65f139fb6a372bc2ebee3fdbf661 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 14 Apr 2017 00:35:10 +0100 Subject: sfp: add sfp-bus to bridge between network devices and sfp cages Signed-off-by: Russell King --- drivers/net/phy/Makefile | 3 + drivers/net/phy/phylink.c | 157 +++++++++++++++ drivers/net/phy/sfp-bus.c | 475 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/phy/sfp.h | 28 +++ include/linux/sfp.h | 434 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 1097 insertions(+) create mode 100644 drivers/net/phy/sfp-bus.c create mode 100644 drivers/net/phy/sfp.h create mode 100644 include/linux/sfp.h diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index c43e5b99fda4..4c16a10f420e 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -38,6 +38,9 @@ obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o +sfp-obj-$(CONFIG_SFP) += sfp-bus.o +obj-y += $(sfp-obj-y) $(sfp-obj-m) + obj-$(CONFIG_AMD_PHY) += amd.o obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o obj-$(CONFIG_AT803X_PHY) += at803x.o diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index af61d7d400af..02082f4a8a95 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -21,6 +21,7 @@ #include #include +#include "sfp.h" #include "swphy.h" #define SUPPORTED_INTERFACES \ @@ -32,6 +33,7 @@ enum { PHYLINK_DISABLE_STOPPED, + PHYLINK_DISABLE_LINK, }; struct phylink { @@ -54,6 +56,8 @@ struct phylink { struct work_struct resolve; bool mac_link_dropped; + + struct sfp_bus *sfp_bus; }; static inline void linkmode_zero(unsigned long *dst) @@ -466,6 +470,24 @@ static void phylink_run_resolve(struct phylink *pl) queue_work(system_power_efficient_wq, &pl->resolve); } +static const struct sfp_upstream_ops sfp_phylink_ops; + +static int phylink_register_sfp(struct phylink *pl, struct device_node *np) +{ + struct device_node *sfp_np; + + sfp_np = of_parse_phandle(np, "sfp", 0); + if (!sfp_np) + return 0; + + pl->sfp_bus = sfp_register_upstream(sfp_np, pl->netdev, pl, + &sfp_phylink_ops); + if (!pl->sfp_bus) + return -ENOMEM; + + return 0; +} + struct phylink *phylink_create(struct net_device *ndev, struct device_node *np, phy_interface_t iface, const struct phylink_mac_ops *ops) { @@ -507,12 +529,21 @@ struct phylink *phylink_create(struct net_device *ndev, struct device_node *np, } } + ret = phylink_register_sfp(pl, np); + if (ret < 0) { + kfree(pl); + return ERR_PTR(ret); + } + return pl; } EXPORT_SYMBOL_GPL(phylink_create); void phylink_destroy(struct phylink *pl) { + if (pl->sfp_bus) + sfp_unregister_upstream(pl->sfp_bus); + cancel_work_sync(&pl->resolve); kfree(pl); } @@ -706,6 +737,8 @@ void phylink_start(struct phylink *pl) clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); phylink_run_resolve(pl); + if (pl->sfp_bus) + sfp_upstream_start(pl->sfp_bus); if (pl->phydev) phy_start(pl->phydev); } @@ -717,6 +750,8 @@ void phylink_stop(struct phylink *pl) if (pl->phydev) phy_stop(pl->phydev); + if (pl->sfp_bus) + sfp_upstream_stop(pl->sfp_bus); set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); flush_work(&pl->resolve); @@ -1166,4 +1201,126 @@ int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd) } EXPORT_SYMBOL_GPL(phylink_mii_ioctl); + + +static int phylink_sfp_module_insert(void *upstream, + const struct sfp_eeprom_id *id) +{ + struct phylink *pl = upstream; + __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, }; + struct phylink_link_state config; + phy_interface_t iface; + int mode, ret = 0; + bool changed; + u8 port; + + sfp_parse_support(pl->sfp_bus, id, support); + port = sfp_parse_port(pl->sfp_bus, id, support); + iface = sfp_parse_interface(pl->sfp_bus, id); + + WARN_ON(!lockdep_rtnl_is_held()); + + switch (iface) { + case PHY_INTERFACE_MODE_SGMII: + mode = MLO_AN_SGMII; + break; + case PHY_INTERFACE_MODE_1000BASEX: + mode = MLO_AN_8023Z; + break; + default: + return -EINVAL; + } + + memset(&config, 0, sizeof(config)); + linkmode_copy(config.advertising, support); + config.interface = iface; + config.speed = SPEED_UNKNOWN; + config.duplex = DUPLEX_UNKNOWN; + config.pause = MLO_PAUSE_AN; + config.an_enabled = pl->link_config.an_enabled; + + /* Ignore errors if we're expecting a PHY to attach later */ + ret = phylink_validate(pl, support, &config); + if (ret) { + netdev_err(pl->netdev, "validation of %s/%s with support %*pb failed: %d\n", + phylink_an_mode_str(mode), phy_modes(config.interface), + __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret); + return ret; + } + + netdev_dbg(pl->netdev, "requesting link mode %s/%s with support %*pb\n", + phylink_an_mode_str(mode), phy_modes(config.interface), + __ETHTOOL_LINK_MODE_MASK_NBITS, support); + + if (mode == MLO_AN_8023Z && pl->phydev) + return -EINVAL; + + changed = !bitmap_equal(pl->supported, support, + __ETHTOOL_LINK_MODE_MASK_NBITS); + if (changed) { + linkmode_copy(pl->supported, support); + linkmode_copy(pl->link_config.advertising, config.advertising); + } + + if (pl->link_an_mode != mode || + pl->link_config.interface != config.interface) { + pl->link_config.interface = config.interface; + pl->link_an_mode = mode; + + changed = true; + + netdev_info(pl->netdev, "switched to %s/%s link mode\n", + phylink_an_mode_str(mode), + phy_modes(config.interface)); + } + + pl->link_port = port; + + if (changed && !test_bit(PHYLINK_DISABLE_STOPPED, + &pl->phylink_disable_state)) + phylink_mac_config(pl, &pl->link_config); + + return ret; +} + +static void phylink_sfp_link_down(void *upstream) +{ + struct phylink *pl = upstream; + + WARN_ON(!lockdep_rtnl_is_held()); + + set_bit(PHYLINK_DISABLE_LINK, &pl->phylink_disable_state); + flush_work(&pl->resolve); + + netif_carrier_off(pl->netdev); +} + +static void phylink_sfp_link_up(void *upstream) +{ + struct phylink *pl = upstream; + + WARN_ON(!lockdep_rtnl_is_held()); + + clear_bit(PHYLINK_DISABLE_LINK, &pl->phylink_disable_state); + phylink_run_resolve(pl); +} + +static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy) +{ + return phylink_connect_phy(upstream, phy); +} + +static void phylink_sfp_disconnect_phy(void *upstream) +{ + phylink_disconnect_phy(upstream); +} + +static const struct sfp_upstream_ops sfp_phylink_ops = { + .module_insert = phylink_sfp_module_insert, + .link_up = phylink_sfp_link_up, + .link_down = phylink_sfp_link_down, + .connect_phy = phylink_sfp_connect_phy, + .disconnect_phy = phylink_sfp_disconnect_phy, +}; + MODULE_LICENSE("GPL"); diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c new file mode 100644 index 000000000000..5cb5384697ea --- /dev/null +++ b/drivers/net/phy/sfp-bus.c @@ -0,0 +1,475 @@ +#include +#include +#include +#include +#include +#include +#include + +#include "sfp.h" + +struct sfp_bus { + struct kref kref; + struct list_head node; + struct device_node *device_node; + + const struct sfp_socket_ops *socket_ops; + struct device *sfp_dev; + struct sfp *sfp; + + const struct sfp_upstream_ops *upstream_ops; + void *upstream; + struct net_device *netdev; + struct phy_device *phydev; + + bool registered; + bool started; +}; + + +int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id, + unsigned long *support) +{ + int port; + + /* port is the physical connector, set this from the connector field. */ + switch (id->base.connector) { + case SFP_CONNECTOR_SC: + case SFP_CONNECTOR_FIBERJACK: + case SFP_CONNECTOR_LC: + case SFP_CONNECTOR_MT_RJ: + case SFP_CONNECTOR_MU: + case SFP_CONNECTOR_OPTICAL_PIGTAIL: + if (support) + phylink_set(support, FIBRE); + port = PORT_FIBRE; + break; + + case SFP_CONNECTOR_RJ45: + if (support) + phylink_set(support, TP); + port = PORT_TP; + break; + + case SFP_CONNECTOR_UNSPEC: + if (id->base.e1000_base_t) { + if (support) + phylink_set(support, TP); + port = PORT_TP; + break; + } + /* fallthrough */ + case SFP_CONNECTOR_SG: /* guess */ + case SFP_CONNECTOR_MPO_1X12: + case SFP_CONNECTOR_MPO_2X16: + case SFP_CONNECTOR_HSSDC_II: + case SFP_CONNECTOR_COPPER_PIGTAIL: + case SFP_CONNECTOR_NOSEPARATE: + case SFP_CONNECTOR_MXC_2X16: + port = PORT_OTHER; + break; + default: + dev_warn(bus->sfp_dev, "SFP: unknown connector id 0x%02x\n", + id->base.connector); + port = PORT_OTHER; + break; + } + + return port; +} +EXPORT_SYMBOL_GPL(sfp_parse_port); + +phy_interface_t sfp_parse_interface(struct sfp_bus *bus, + const struct sfp_eeprom_id *id) +{ + phy_interface_t iface; + + /* Setting the serdes link mode is guesswork: there's no field in + * the EEPROM which indicates what mode should be used. + * + * If the module wants 64b66b, then it must be >= 10G. + * + * If it's a gigabit-only fiber module, it probably does not have + * a PHY, so switch to 802.3z negotiation mode. Otherwise, switch + * to SGMII mode (which is required to support non-gigabit speeds). + */ + switch (id->base.encoding) { + case SFP_ENCODING_8472_64B66B: + iface = PHY_INTERFACE_MODE_10GKR; + break; + + case SFP_ENCODING_8B10B: + if (!id->base.e1000_base_t && + !id->base.e100_base_lx && + !id->base.e100_base_fx) + iface = PHY_INTERFACE_MODE_1000BASEX; + else + iface = PHY_INTERFACE_MODE_SGMII; + break; + + default: + iface = PHY_INTERFACE_MODE_NA; + dev_err(bus->sfp_dev, + "SFP module encoding does not support 8b10b nor 64b66b\n"); + break; + } + + return iface; +} +EXPORT_SYMBOL_GPL(sfp_parse_interface); + +void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, + unsigned long *support) +{ + phylink_set(support, Autoneg); + phylink_set(support, Pause); + phylink_set(support, Asym_Pause); + + /* Set ethtool support from the compliance fields. */ + if (id->base.e10g_base_sr) + phylink_set(support, 10000baseSR_Full); + if (id->base.e10g_base_lr) + phylink_set(support, 10000baseLR_Full); + if (id->base.e10g_base_lrm) + phylink_set(support, 10000baseLRM_Full); + if (id->base.e10g_base_er) + phylink_set(support, 10000baseER_Full); + if (id->base.e1000_base_sx || + id->base.e1000_base_lx || + id->base.e1000_base_cx) + phylink_set(support, 1000baseX_Full); + if (id->base.e1000_base_t) { + phylink_set(support, 1000baseT_Half); + phylink_set(support, 1000baseT_Full); + } + + switch (id->base.extended_cc) { + case 0x00: /* Unspecified */ + break; + case 0x02: /* 100Gbase-SR4 or 25Gbase-SR */ + phylink_set(support, 100000baseSR4_Full); + phylink_set(support, 25000baseSR_Full); + break; + case 0x03: /* 100Gbase-LR4 or 25Gbase-LR */ + case 0x04: /* 100Gbase-ER4 or 25Gbase-ER */ + phylink_set(support, 100000baseLR4_ER4_Full); + break; + case 0x0b: /* 100Gbase-CR4 or 25Gbase-CR CA-L */ + case 0x0c: /* 25Gbase-CR CA-S */ + case 0x0d: /* 25Gbase-CR CA-N */ + phylink_set(support, 100000baseCR4_Full); + phylink_set(support, 25000baseCR_Full); + break; + default: + dev_warn(bus->sfp_dev, + "Unknown/unsupported extended compliance code: 0x%02x\n", + id->base.extended_cc); + break; + } + + /* For fibre channel SFP, derive possible BaseX modes */ + if (id->base.fc_speed_100 || + id->base.fc_speed_200 || + id->base.fc_speed_400) { + if (id->base.br_nominal >= 31) + phylink_set(support, 2500baseX_Full); + if (id->base.br_nominal >= 12) + phylink_set(support, 1000baseX_Full); + } + + switch (id->base.connector) { + case SFP_CONNECTOR_SC: + case SFP_CONNECTOR_FIBERJACK: + case SFP_CONNECTOR_LC: + case SFP_CONNECTOR_MT_RJ: + case SFP_CONNECTOR_MU: + case SFP_CONNECTOR_OPTICAL_PIGTAIL: + break; + + case SFP_CONNECTOR_UNSPEC: + if (id->base.e1000_base_t) + break; + + case SFP_CONNECTOR_SG: /* guess */ + case SFP_CONNECTOR_MPO_1X12: + case SFP_CONNECTOR_MPO_2X16: + case SFP_CONNECTOR_HSSDC_II: + case SFP_CONNECTOR_COPPER_PIGTAIL: + case SFP_CONNECTOR_NOSEPARATE: + case SFP_CONNECTOR_MXC_2X16: + default: + /* a guess at the supported link modes */ + dev_warn(bus->sfp_dev, + "Guessing link modes, please report...\n"); + phylink_set(support, 1000baseT_Half); + phylink_set(support, 1000baseT_Full); + break; + } +} +EXPORT_SYMBOL_GPL(sfp_parse_support); + + +static LIST_HEAD(sfp_buses); +static DEFINE_MUTEX(sfp_mutex); + +static const struct sfp_upstream_ops *sfp_get_upstream_ops(struct sfp_bus *bus) +{ + return bus->registered ? bus->upstream_ops : NULL; +} + +static struct sfp_bus *sfp_bus_get(struct device_node *np) +{ + struct sfp_bus *sfp, *new, *found = NULL; + + new = kzalloc(sizeof(*new), GFP_KERNEL); + + mutex_lock(&sfp_mutex); + + list_for_each_entry(sfp, &sfp_buses, node) { + if (sfp->device_node == np) { + kref_get(&sfp->kref); + found = sfp; + break; + } + } + + if (!found && new) { + kref_init(&new->kref); + new->device_node = np; + list_add(&new->node, &sfp_buses); + found = new; + new = NULL; + } + + mutex_unlock(&sfp_mutex); + + kfree(new); + + return found; +} + +static void sfp_bus_release(struct kref *kref) __releases(sfp_mutex) +{ + struct sfp_bus *bus = container_of(kref, struct sfp_bus, kref); + + list_del(&bus->node); + mutex_unlock(&sfp_mutex); + kfree(bus); +} + +static void sfp_bus_put(struct sfp_bus *bus) +{ + kref_put_mutex(&bus->kref, sfp_bus_release, &sfp_mutex); +} + +static int sfp_register_bus(struct sfp_bus *bus) +{ + const struct sfp_upstream_ops *ops = bus->upstream_ops; + int ret; + + if (ops) { + if (ops->link_down) + ops->link_down(bus->upstream); + if (ops->connect_phy && bus->phydev) { + ret = ops->connect_phy(bus->upstream, bus->phydev); + if (ret) + return ret; + } + } + if (bus->started) + bus->socket_ops->start(bus->sfp); + bus->registered = true; + return 0; +} + +static void sfp_unregister_bus(struct sfp_bus *bus) +{ + const struct sfp_upstream_ops *ops = bus->upstream_ops; + + if (bus->registered) { + if (bus->started) + bus->socket_ops->stop(bus->sfp); + if (bus->phydev && ops && ops->disconnect_phy) + ops->disconnect_phy(bus->upstream); + } + bus->registered = false; +} + + +int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo) +{ + if (!bus->registered) + return -ENOIOCTLCMD; + return bus->socket_ops->module_info(bus->sfp, modinfo); +} +EXPORT_SYMBOL_GPL(sfp_get_module_info); + +int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee, + u8 *data) +{ + if (!bus->registered) + return -ENOIOCTLCMD; + return bus->socket_ops->module_eeprom(bus->sfp, ee, data); +} +EXPORT_SYMBOL_GPL(sfp_get_module_eeprom); + +void sfp_upstream_start(struct sfp_bus *bus) +{ + if (bus->registered) + bus->socket_ops->start(bus->sfp); + bus->started = true; +} +EXPORT_SYMBOL_GPL(sfp_upstream_start); + +void sfp_upstream_stop(struct sfp_bus *bus) +{ + if (bus->registered) + bus->socket_ops->stop(bus->sfp); + bus->started = false; +} +EXPORT_SYMBOL_GPL(sfp_upstream_stop); + +struct sfp_bus *sfp_register_upstream(struct device_node *np, + struct net_device *ndev, void *upstream, + const struct sfp_upstream_ops *ops) +{ + struct sfp_bus *bus = sfp_bus_get(np); + int ret = 0; + + if (bus) { + rtnl_lock(); + bus->upstream_ops = ops; + bus->upstream = upstream; + bus->netdev = ndev; + + if (bus->sfp) + ret = sfp_register_bus(bus); + rtnl_unlock(); + } + + if (ret) { + sfp_bus_put(bus); + bus = NULL; + } + + return bus; +} +EXPORT_SYMBOL_GPL(sfp_register_upstream); + +void sfp_unregister_upstream(struct sfp_bus *bus) +{ + rtnl_lock(); + sfp_unregister_bus(bus); + bus->upstream = NULL; + bus->netdev = NULL; + rtnl_unlock(); + + sfp_bus_put(bus); +} +EXPORT_SYMBOL_GPL(sfp_unregister_upstream); + + +/* Socket driver entry points */ +int sfp_add_phy(struct sfp_bus *bus, struct phy_device *phydev) +{ + const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus); + int ret = 0; + + if (ops && ops->connect_phy) + ret = ops->connect_phy(bus->upstream, phydev); + + if (ret == 0) + bus->phydev = phydev; + + return ret; +} +EXPORT_SYMBOL_GPL(sfp_add_phy); + +void sfp_remove_phy(struct sfp_bus *bus) +{ + const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus); + + if (ops && ops->disconnect_phy) + ops->disconnect_phy(bus->upstream); + bus->phydev = NULL; +} +EXPORT_SYMBOL_GPL(sfp_remove_phy); + + +void sfp_link_up(struct sfp_bus *bus) +{ + const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus); + + if (ops && ops->link_up) + ops->link_up(bus->upstream); +} +EXPORT_SYMBOL_GPL(sfp_link_up); + +void sfp_link_down(struct sfp_bus *bus) +{ + const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus); + + if (ops && ops->link_down) + ops->link_down(bus->upstream); +} +EXPORT_SYMBOL_GPL(sfp_link_down); + +int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id) +{ + const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus); + int ret = 0; + + if (ops && ops->module_insert) + ret = ops->module_insert(bus->upstream, id); + + return ret; +} +EXPORT_SYMBOL_GPL(sfp_module_insert); + +void sfp_module_remove(struct sfp_bus *bus) +{ + const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus); + + if (ops && ops->module_remove) + ops->module_remove(bus->upstream); +} +EXPORT_SYMBOL_GPL(sfp_module_remove); + +struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp, + const struct sfp_socket_ops *ops) +{ + struct sfp_bus *bus = sfp_bus_get(dev->of_node); + int ret = 0; + + if (bus) { + rtnl_lock(); + bus->sfp_dev = dev; + bus->sfp = sfp; + bus->socket_ops = ops; + + if (bus->netdev) + ret = sfp_register_bus(bus); + rtnl_unlock(); + } + + if (ret) { + sfp_bus_put(bus); + bus = NULL; + } + + return bus; +} +EXPORT_SYMBOL_GPL(sfp_register_socket); + +void sfp_unregister_socket(struct sfp_bus *bus) +{ + rtnl_lock(); + sfp_unregister_bus(bus); + bus->sfp_dev = NULL; + bus->sfp = NULL; + bus->socket_ops = NULL; + rtnl_unlock(); + + sfp_bus_put(bus); +} +EXPORT_SYMBOL_GPL(sfp_unregister_socket); diff --git a/drivers/net/phy/sfp.h b/drivers/net/phy/sfp.h new file mode 100644 index 000000000000..31b0acf337e2 --- /dev/null +++ b/drivers/net/phy/sfp.h @@ -0,0 +1,28 @@ +#ifndef SFP_H +#define SFP_H + +#include +#include + +struct sfp; + +struct sfp_socket_ops { + void (*start)(struct sfp *sfp); + void (*stop)(struct sfp *sfp); + int (*module_info)(struct sfp *sfp, struct ethtool_modinfo *modinfo); + int (*module_eeprom)(struct sfp *sfp, struct ethtool_eeprom *ee, + u8 *data); +}; + +int sfp_add_phy(struct sfp_bus *bus, struct phy_device *phydev); +void sfp_remove_phy(struct sfp_bus *bus); +void sfp_link_up(struct sfp_bus *bus); +void sfp_link_down(struct sfp_bus *bus); +int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id); +void sfp_module_remove(struct sfp_bus *bus); +int sfp_link_configure(struct sfp_bus *bus, const struct sfp_eeprom_id *id); +struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp, + const struct sfp_socket_ops *ops); +void sfp_unregister_socket(struct sfp_bus *bus); + +#endif diff --git a/include/linux/sfp.h b/include/linux/sfp.h new file mode 100644 index 000000000000..4a906f560817 --- /dev/null +++ b/include/linux/sfp.h @@ -0,0 +1,434 @@ +#ifndef LINUX_SFP_H +#define LINUX_SFP_H + +#include + +struct __packed sfp_eeprom_base { + u8 phys_id; + u8 phys_ext_id; + u8 connector; +#if defined __BIG_ENDIAN_BITFIELD + u8 e10g_base_er:1; + u8 e10g_base_lrm:1; + u8 e10g_base_lr:1; + u8 e10g_base_sr:1; + u8 if_1x_sx:1; + u8 if_1x_lx:1; + u8 if_1x_copper_active:1; + u8 if_1x_copper_passive:1; + + u8 escon_mmf_1310_led:1; + u8 escon_smf_1310_laser:1; + u8 sonet_oc192_short_reach:1; + u8 sonet_reach_bit1:1; + u8 sonet_reach_bit2:1; + u8 sonet_oc48_long_reach:1; + u8 sonet_oc48_intermediate_reach:1; + u8 sonet_oc48_short_reach:1; + + u8 unallocated_5_7:1; + u8 sonet_oc12_smf_long_reach:1; + u8 sonet_oc12_smf_intermediate_reach:1; + u8 sonet_oc12_short_reach:1; + u8 unallocated_5_3:1; + u8 sonet_oc3_smf_long_reach:1; + u8 sonet_oc3_smf_intermediate_reach:1; + u8 sonet_oc3_short_reach:1; + + u8 e_base_px:1; + u8 e_base_bx10:1; + u8 e100_base_fx:1; + u8 e100_base_lx:1; + u8 e1000_base_t:1; + u8 e1000_base_cx:1; + u8 e1000_base_lx:1; + u8 e1000_base_sx:1; + + u8 fc_ll_v:1; + u8 fc_ll_s:1; + u8 fc_ll_i:1; + u8 fc_ll_l:1; + u8 fc_ll_m:1; + u8 fc_tech_sa:1; + u8 fc_tech_lc:1; + u8 fc_tech_electrical_inter_enclosure:1; + + u8 fc_tech_electrical_intra_enclosure:1; + u8 fc_tech_sn:1; + u8 fc_tech_sl:1; + u8 fc_tech_ll:1; + u8 sfp_ct_active:1; + u8 sfp_ct_passive:1; + u8 unallocated_8_1:1; + u8 unallocated_8_0:1; + + u8 fc_media_tw:1; + u8 fc_media_tp:1; + u8 fc_media_mi:1; + u8 fc_media_tv:1; + u8 fc_media_m6:1; + u8 fc_media_m5:1; + u8 unallocated_9_1:1; + u8 fc_media_sm:1; + + u8 fc_speed_1200:1; + u8 fc_speed_800:1; + u8 fc_speed_1600:1; + u8 fc_speed_400:1; + u8 fc_speed_3200:1; + u8 fc_speed_200:1; + u8 unallocated_10_1:1; + u8 fc_speed_100:1; +#elif defined __LITTLE_ENDIAN_BITFIELD + u8 if_1x_copper_passive:1; + u8 if_1x_copper_active:1; + u8 if_1x_lx:1; + u8 if_1x_sx:1; + u8 e10g_base_sr:1; + u8 e10g_base_lr:1; + u8 e10g_base_lrm:1; + u8 e10g_base_er:1; + + u8 sonet_oc3_short_reach:1; + u8 sonet_oc3_smf_intermediate_reach:1; + u8 sonet_oc3_smf_long_reach:1; + u8 unallocated_5_3:1; + u8 sonet_oc12_short_reach:1; + u8 sonet_oc12_smf_intermediate_reach:1; + u8 sonet_oc12_smf_long_reach:1; + u8 unallocated_5_7:1; + + u8 sonet_oc48_short_reach:1; + u8 sonet_oc48_intermediate_reach:1; + u8 sonet_oc48_long_reach:1; + u8 sonet_reach_bit2:1; + u8 sonet_reach_bit1:1; + u8 sonet_oc192_short_reach:1; + u8 escon_smf_1310_laser:1; + u8 escon_mmf_1310_led:1; + + u8 e1000_base_sx:1; + u8 e1000_base_lx:1; + u8 e1000_base_cx:1; + u8 e1000_base_t:1; + u8 e100_base_lx:1; + u8 e100_base_fx:1; + u8 e_base_bx10:1; + u8 e_base_px:1; + + u8 fc_tech_electrical_inter_enclosure:1; + u8 fc_tech_lc:1; + u8 fc_tech_sa:1; + u8 fc_ll_m:1; + u8 fc_ll_l:1; + u8 fc_ll_i:1; + u8 fc_ll_s:1; + u8 fc_ll_v:1; + + u8 unallocated_8_0:1; + u8 unallocated_8_1:1; + u8 sfp_ct_passive:1; + u8 sfp_ct_active:1; + u8 fc_tech_ll:1; + u8 fc_tech_sl:1; + u8 fc_tech_sn:1; + u8 fc_tech_electrical_intra_enclosure:1; + + u8 fc_media_sm:1; + u8 unallocated_9_1:1; + u8 fc_media_m5:1; + u8 fc_media_m6:1; + u8 fc_media_tv:1; + u8 fc_media_mi:1; + u8 fc_media_tp:1; + u8 fc_media_tw:1; + + u8 fc_speed_100:1; + u8 unallocated_10_1:1; + u8 fc_speed_200:1; + u8 fc_speed_3200:1; + u8 fc_speed_400:1; + u8 fc_speed_1600:1; + u8 fc_speed_800:1; + u8 fc_speed_1200:1; +#else +#error Unknown Endian +#endif + u8 encoding; + u8 br_nominal; + u8 rate_id; + u8 link_len[6]; + char vendor_name[16]; + u8 extended_cc; + char vendor_oui[3]; + char vendor_pn[16]; + char vendor_rev[4]; + union { + __be16 optical_wavelength; + u8 cable_spec; + }; + u8 reserved62; + u8 cc_base; +}; + +struct __packed sfp_eeprom_ext { + __be16 options; + u8 br_max; + u8 br_min; + char vendor_sn[16]; + char datecode[8]; + u8 diagmon; + u8 enhopts; + u8 sff8472_compliance; + u8 cc_ext; +}; + +struct __packed sfp_eeprom_id { + struct sfp_eeprom_base base; + struct sfp_eeprom_ext ext; +}; + +/* SFP EEPROM registers */ +enum { + SFP_PHYS_ID = 0x00, + SFP_PHYS_EXT_ID = 0x01, + SFP_CONNECTOR = 0x02, + SFP_COMPLIANCE = 0x03, + SFP_ENCODING = 0x0b, + SFP_BR_NOMINAL = 0x0c, + SFP_RATE_ID = 0x0d, + SFP_LINK_LEN_SM_KM = 0x0e, + SFP_LINK_LEN_SM_100M = 0x0f, + SFP_LINK_LEN_50UM_OM2_10M = 0x10, + SFP_LINK_LEN_62_5UM_OM1_10M = 0x11, + SFP_LINK_LEN_COPPER_1M = 0x12, + SFP_LINK_LEN_50UM_OM4_10M = 0x12, + SFP_LINK_LEN_50UM_OM3_10M = 0x13, + SFP_VENDOR_NAME = 0x14, + SFP_VENDOR_OUI = 0x25, + SFP_VENDOR_PN = 0x28, + SFP_VENDOR_REV = 0x38, + SFP_OPTICAL_WAVELENGTH_MSB = 0x3c, + SFP_OPTICAL_WAVELENGTH_LSB = 0x3d, + SFP_CABLE_SPEC = 0x3c, + SFP_CC_BASE = 0x3f, + SFP_OPTIONS = 0x40, /* 2 bytes, MSB, LSB */ + SFP_BR_MAX = 0x42, + SFP_BR_MIN = 0x43, + SFP_VENDOR_SN = 0x44, + SFP_DATECODE = 0x54, + SFP_DIAGMON = 0x5c, + SFP_ENHOPTS = 0x5d, + SFP_SFF8472_COMPLIANCE = 0x5e, + SFP_CC_EXT = 0x5f, + + SFP_PHYS_ID_SFP = 0x03, + SFP_PHYS_EXT_ID_SFP = 0x04, + SFP_CONNECTOR_UNSPEC = 0x00, + /* codes 01-05 not supportable on SFP, but some modules have single SC */ + SFP_CONNECTOR_SC = 0x01, + SFP_CONNECTOR_FIBERJACK = 0x06, + SFP_CONNECTOR_LC = 0x07, + SFP_CONNECTOR_MT_RJ = 0x08, + SFP_CONNECTOR_MU = 0x09, + SFP_CONNECTOR_SG = 0x0a, + SFP_CONNECTOR_OPTICAL_PIGTAIL = 0x0b, + SFP_CONNECTOR_MPO_1X12 = 0x0c, + SFP_CONNECTOR_MPO_2X16 = 0x0d, + SFP_CONNECTOR_HSSDC_II = 0x20, + SFP_CONNECTOR_COPPER_PIGTAIL = 0x21, + SFP_CONNECTOR_RJ45 = 0x22, + SFP_CONNECTOR_NOSEPARATE = 0x23, + SFP_CONNECTOR_MXC_2X16 = 0x24, + SFP_ENCODING_UNSPEC = 0x00, + SFP_ENCODING_8B10B = 0x01, + SFP_ENCODING_4B5B = 0x02, + SFP_ENCODING_NRZ = 0x03, + SFP_ENCODING_8472_MANCHESTER = 0x04, + SFP_ENCODING_8472_SONET = 0x05, + SFP_ENCODING_8472_64B66B = 0x06, + SFP_ENCODING_256B257B = 0x07, + SFP_ENCODING_PAM4 = 0x08, + SFP_OPTIONS_HIGH_POWER_LEVEL = BIT(13), + SFP_OPTIONS_PAGING_A2 = BIT(12), + SFP_OPTIONS_RETIMER = BIT(11), + SFP_OPTIONS_COOLED_XCVR = BIT(10), + SFP_OPTIONS_POWER_DECL = BIT(9), + SFP_OPTIONS_RX_LINEAR_OUT = BIT(8), + SFP_OPTIONS_RX_DECISION_THRESH = BIT(7), + SFP_OPTIONS_TUNABLE_TX = BIT(6), + SFP_OPTIONS_RATE_SELECT = BIT(5), + SFP_OPTIONS_TX_DISABLE = BIT(4), + SFP_OPTIONS_TX_FAULT = BIT(3), + SFP_OPTIONS_LOS_INVERTED = BIT(2), + SFP_OPTIONS_LOS_NORMAL = BIT(1), + SFP_DIAGMON_DDM = BIT(6), + SFP_DIAGMON_INT_CAL = BIT(5), + SFP_DIAGMON_EXT_CAL = BIT(4), + SFP_DIAGMON_RXPWR_AVG = BIT(3), + SFP_DIAGMON_ADDRMODE = BIT(2), + SFP_ENHOPTS_ALARMWARN = BIT(7), + SFP_ENHOPTS_SOFT_TX_DISABLE = BIT(6), + SFP_ENHOPTS_SOFT_TX_FAULT = BIT(5), + SFP_ENHOPTS_SOFT_RX_LOS = BIT(4), + SFP_ENHOPTS_SOFT_RATE_SELECT = BIT(3), + SFP_ENHOPTS_APP_SELECT_SFF8079 = BIT(2), + SFP_ENHOPTS_SOFT_RATE_SFF8431 = BIT(1), + SFP_SFF8472_COMPLIANCE_NONE = 0x00, + SFP_SFF8472_COMPLIANCE_REV9_3 = 0x01, + SFP_SFF8472_COMPLIANCE_REV9_5 = 0x02, + SFP_SFF8472_COMPLIANCE_REV10_2 = 0x03, + SFP_SFF8472_COMPLIANCE_REV10_4 = 0x04, + SFP_SFF8472_COMPLIANCE_REV11_0 = 0x05, + SFP_SFF8472_COMPLIANCE_REV11_3 = 0x06, + SFP_SFF8472_COMPLIANCE_REV11_4 = 0x07, + SFP_SFF8472_COMPLIANCE_REV12_0 = 0x08, +}; + +/* SFP Diagnostics */ +enum { + /* Alarm and warnings stored MSB at lower address then LSB */ + SFP_TEMP_HIGH_ALARM = 0x00, + SFP_TEMP_LOW_ALARM = 0x02, + SFP_TEMP_HIGH_WARN = 0x04, + SFP_TEMP_LOW_WARN = 0x06, + SFP_VOLT_HIGH_ALARM = 0x08, + SFP_VOLT_LOW_ALARM = 0x0a, + SFP_VOLT_HIGH_WARN = 0x0c, + SFP_VOLT_LOW_WARN = 0x0e, + SFP_BIAS_HIGH_ALARM = 0x10, + SFP_BIAS_LOW_ALARM = 0x12, + SFP_BIAS_HIGH_WARN = 0x14, + SFP_BIAS_LOW_WARN = 0x16, + SFP_TXPWR_HIGH_ALARM = 0x18, + SFP_TXPWR_LOW_ALARM = 0x1a, + SFP_TXPWR_HIGH_WARN = 0x1c, + SFP_TXPWR_LOW_WARN = 0x1e, + SFP_RXPWR_HIGH_ALARM = 0x20, + SFP_RXPWR_LOW_ALARM = 0x22, + SFP_RXPWR_HIGH_WARN = 0x24, + SFP_RXPWR_LOW_WARN = 0x26, + SFP_LASER_TEMP_HIGH_ALARM = 0x28, + SFP_LASER_TEMP_LOW_ALARM = 0x2a, + SFP_LASER_TEMP_HIGH_WARN = 0x2c, + SFP_LASER_TEMP_LOW_WARN = 0x2e, + SFP_TEC_CUR_HIGH_ALARM = 0x30, + SFP_TEC_CUR_LOW_ALARM = 0x32, + SFP_TEC_CUR_HIGH_WARN = 0x34, + SFP_TEC_CUR_LOW_WARN = 0x36, + SFP_CAL_RXPWR4 = 0x38, + SFP_CAL_RXPWR3 = 0x3c, + SFP_CAL_RXPWR2 = 0x40, + SFP_CAL_RXPWR1 = 0x44, + SFP_CAL_RXPWR0 = 0x48, + SFP_CAL_TXI_SLOPE = 0x4c, + SFP_CAL_TXI_OFFSET = 0x4e, + SFP_CAL_TXPWR_SLOPE = 0x50, + SFP_CAL_TXPWR_OFFSET = 0x52, + SFP_CAL_T_SLOPE = 0x54, + SFP_CAL_T_OFFSET = 0x56, + SFP_CAL_V_SLOPE = 0x58, + SFP_CAL_V_OFFSET = 0x5a, + SFP_CHKSUM = 0x5f, + + SFP_TEMP = 0x60, + SFP_VCC = 0x62, + SFP_TX_BIAS = 0x64, + SFP_TX_POWER = 0x66, + SFP_RX_POWER = 0x68, + SFP_LASER_TEMP = 0x6a, + SFP_TEC_CUR = 0x6c, + + SFP_STATUS = 0x6e, + SFP_ALARM = 0x70, + + SFP_EXT_STATUS = 0x76, + SFP_VSL = 0x78, + SFP_PAGE = 0x7f, +}; + +struct device_node; +struct ethtool_eeprom; +struct ethtool_modinfo; +struct net_device; +struct sfp_bus; + +struct sfp_upstream_ops { + int (*module_insert)(void *, const struct sfp_eeprom_id *id); + void (*module_remove)(void *); + void (*link_down)(void *); + void (*link_up)(void *); + int (*connect_phy)(void *, struct phy_device *); + void (*disconnect_phy)(void *); +}; + +#if IS_ENABLED(CONFIG_SFP) +int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id, + unsigned long *support); +phy_interface_t sfp_parse_interface(struct sfp_bus *bus, + const struct sfp_eeprom_id *id); +void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, + unsigned long *support); + +int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo); +int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee, + u8 *data); +void sfp_upstream_start(struct sfp_bus *bus); +void sfp_upstream_stop(struct sfp_bus *bus); +struct sfp_bus *sfp_register_upstream(struct device_node *np, + struct net_device *ndev, void *upstream, + const struct sfp_upstream_ops *ops); +void sfp_unregister_upstream(struct sfp_bus *bus); +#else +static inline int sfp_parse_port(struct sfp_bus *bus, + const struct sfp_eeprom_id *id, + unsigned long *support) +{ + return PORT_OTHER; +} + +static inline phy_interface_t sfp_parse_interface(struct sfp_bus *bus, + const struct sfp_eeprom_id *id) +{ + return PHY_INTERFACE_MODE_NA; +} + +static inline void sfp_parse_support(struct sfp_bus *bus, + const struct sfp_eeprom_id *id, + unsigned long *support) +{ +} + +static inline int sfp_get_module_info(struct sfp_bus *bus, + struct ethtool_modinfo *modinfo) +{ + return -EOPNOTSUPP; +} + +static inline int sfp_get_module_eeprom(struct sfp_bus *bus, + struct ethtool_eeprom *ee, u8 *data) +{ + return -EOPNOTSUPP; +} + +static inline void sfp_upstream_start(struct sfp_bus *bus) +{ +} + +static inline void sfp_upstream_stop(struct sfp_bus *bus) +{ +} + +static inline struct sfp_bus *sfp_register_upstream(struct device_node *np, + struct net_device *ndev, void *upstream, + const struct sfp_upstream_ops *ops) +{ + return (struct sfp_bus *)-1; +} + +static inline void sfp_unregister_upstream(struct sfp_bus *bus) +{ +} +#endif + +#endif -- cgit From 5de4347900570dff8dfb586602e54981d47b3355 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 1 Oct 2015 23:10:05 +0100 Subject: phylink: add module EEPROM support Add support for reading module EEPROMs through phylink. Reviewed-by: Florian Fainelli Signed-off-by: Russell King --- drivers/net/phy/phylink.c | 28 ++++++++++++++++++++++++++++ include/linux/phylink.h | 3 +++ 2 files changed, 31 insertions(+) diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 02082f4a8a95..026060c95b82 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -1020,6 +1020,34 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl, } EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam); +int phylink_ethtool_get_module_info(struct phylink *pl, + struct ethtool_modinfo *modinfo) +{ + int ret = -EOPNOTSUPP; + + WARN_ON(!lockdep_rtnl_is_held()); + + if (pl->sfp_bus) + ret = sfp_get_module_info(pl->sfp_bus, modinfo); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_get_module_info); + +int phylink_ethtool_get_module_eeprom(struct phylink *pl, + struct ethtool_eeprom *ee, u8 *buf) +{ + int ret = -EOPNOTSUPP; + + WARN_ON(!lockdep_rtnl_is_held()); + + if (pl->sfp_bus) + ret = sfp_get_module_eeprom(pl->sfp_bus, ee, buf); + + return ret; +} +EXPORT_SYMBOL_GPL(phylink_ethtool_get_module_eeprom); + int phylink_init_eee(struct phylink *pl, bool clk_stop_enable) { int ret = -EPROTONOSUPPORT; diff --git a/include/linux/phylink.h b/include/linux/phylink.h index 76f054f39684..af67edd4ae38 100644 --- a/include/linux/phylink.h +++ b/include/linux/phylink.h @@ -125,6 +125,9 @@ void phylink_ethtool_get_pauseparam(struct phylink *, struct ethtool_pauseparam *); int phylink_ethtool_set_pauseparam(struct phylink *, struct ethtool_pauseparam *); +int phylink_ethtool_get_module_info(struct phylink *, struct ethtool_modinfo *); +int phylink_ethtool_get_module_eeprom(struct phylink *, + struct ethtool_eeprom *, u8 *); int phylink_init_eee(struct phylink *, bool); int phylink_get_eee_err(struct phylink *); int phylink_ethtool_get_eee(struct phylink *, struct ethtool_eee *); -- cgit From 4c97ac7746dfcdf7b8c970aa6387f0c841d332b6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 28 Dec 2016 09:21:32 +0000 Subject: phylink: add support for MII ioctl access to Clause 45 PHYs Add support for reading and writing the clause 45 MII registers. Reviewed-by: Andrew Lunn Signed-off-by: Russell King --- drivers/net/phy/phylink.c | 157 ++++++++++++++++++++++++++++++++++++---------- 1 file changed, 124 insertions(+), 33 deletions(-) diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 026060c95b82..dc0f4d7b7dd2 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -1127,16 +1127,93 @@ static int phylink_mii_emul_read(struct net_device *ndev, unsigned int reg, return val; } +static int phylink_phy_read(struct phylink *pl, unsigned int phy_id, + unsigned int reg) +{ + struct phy_device *phydev = pl->phydev; + int prtad, devad; + + if (mdio_phy_id_is_c45(phy_id)) { + prtad = mdio_phy_id_prtad(phy_id); + devad = mdio_phy_id_devad(phy_id); + devad = MII_ADDR_C45 | devad << 16 | reg; + } else if (phydev->is_c45) { + switch (reg) { + case MII_BMCR: + case MII_BMSR: + case MII_PHYSID1: + case MII_PHYSID2: + devad = __ffs(phydev->c45_ids.devices_in_package); + break; + case MII_ADVERTISE: + case MII_LPA: + if (!(phydev->c45_ids.devices_in_package & MDIO_DEVS_AN)) + return -EINVAL; + devad = MDIO_MMD_AN; + if (reg == MII_ADVERTISE) + reg = MDIO_AN_ADVERTISE; + else + reg = MDIO_AN_LPA; + break; + default: + return -EINVAL; + } + prtad = phy_id; + devad = MII_ADDR_C45 | devad << 16 | reg; + } else { + prtad = phy_id; + devad = reg; + } + return mdiobus_read(pl->phydev->mdio.bus, prtad, devad); +} + +static int phylink_phy_write(struct phylink *pl, unsigned int phy_id, + unsigned int reg, unsigned int val) +{ + struct phy_device *phydev = pl->phydev; + int prtad, devad; + + if (mdio_phy_id_is_c45(phy_id)) { + prtad = mdio_phy_id_prtad(phy_id); + devad = mdio_phy_id_devad(phy_id); + devad = MII_ADDR_C45 | devad << 16 | reg; + } else if (phydev->is_c45) { + switch (reg) { + case MII_BMCR: + case MII_BMSR: + case MII_PHYSID1: + case MII_PHYSID2: + devad = __ffs(phydev->c45_ids.devices_in_package); + break; + case MII_ADVERTISE: + case MII_LPA: + if (!(phydev->c45_ids.devices_in_package & MDIO_DEVS_AN)) + return -EINVAL; + devad = MDIO_MMD_AN; + if (reg == MII_ADVERTISE) + reg = MDIO_AN_ADVERTISE; + else + reg = MDIO_AN_LPA; + break; + default: + return -EINVAL; + } + prtad = phy_id; + devad = MII_ADDR_C45 | devad << 16 | reg; + } else { + prtad = phy_id; + devad = reg; + } + + return mdiobus_write(phydev->mdio.bus, prtad, devad, val); +} + static int phylink_mii_read(struct phylink *pl, unsigned int phy_id, unsigned int reg) { struct phylink_link_state state; int val = 0xffff; - /* PHYs only exist for MLO_AN_PHY and MLO_AN_SGMII */ - if (pl->phydev) - return mdiobus_read(pl->phydev->mdio.bus, phy_id, reg); - switch (pl->link_an_mode) { case MLO_AN_FIXED: if (phy_id == 0) { @@ -1169,12 +1246,6 @@ static int phylink_mii_read(struct phylink *pl, unsigned int phy_id, static int phylink_mii_write(struct phylink *pl, unsigned int phy_id, unsigned int reg, unsigned int val) { - /* PHYs only exist for MLO_AN_PHY and MLO_AN_SGMII */ - if (pl->phydev) { - mdiobus_write(pl->phydev->mdio.bus, phy_id, reg, val); - return 0; - } - switch (pl->link_an_mode) { case MLO_AN_FIXED: break; @@ -1193,36 +1264,56 @@ static int phylink_mii_write(struct phylink *pl, unsigned int phy_id, int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd) { - struct mii_ioctl_data *mii_data = if_mii(ifr); - int val, ret; + struct mii_ioctl_data *mii = if_mii(ifr); + int ret; WARN_ON(!lockdep_rtnl_is_held()); - switch (cmd) { - case SIOCGMIIPHY: - mii_data->phy_id = pl->phydev ? pl->phydev->mdio.addr : 0; - /* fallthrough */ + if (pl->phydev) { + /* PHYs only exist for MLO_AN_PHY and MLO_AN_SGMII */ + switch (cmd) { + case SIOCGMIIPHY: + mii->phy_id = pl->phydev->mdio.addr; + + case SIOCGMIIREG: + ret = phylink_phy_read(pl, mii->phy_id, mii->reg_num); + if (ret >= 0) { + mii->val_out = ret; + ret = 0; + } + break; - case SIOCGMIIREG: - val = phylink_mii_read(pl, mii_data->phy_id, mii_data->reg_num); - if (val < 0) { - ret = val; - } else { - mii_data->val_out = val; - ret = 0; + case SIOCSMIIREG: + ret = phylink_phy_write(pl, mii->phy_id, mii->reg_num, + mii->val_in); + break; + + default: + ret = phy_mii_ioctl(pl->phydev, ifr, cmd); + break; } - break; + } else { + switch (cmd) { + case SIOCGMIIPHY: + mii->phy_id = 0; + + case SIOCGMIIREG: + ret = phylink_mii_read(pl, mii->phy_id, mii->reg_num); + if (ret >= 0) { + mii->val_out = ret; + ret = 0; + } + break; - case SIOCSMIIREG: - ret = phylink_mii_write(pl, mii_data->phy_id, mii_data->reg_num, - mii_data->val_in); - break; + case SIOCSMIIREG: + ret = phylink_mii_write(pl, mii->phy_id, mii->reg_num, + mii->val_in); + break; - default: - ret = -EOPNOTSUPP; - if (pl->phydev) - ret = phy_mii_ioctl(pl->phydev, ifr, cmd); - break; + default: + ret = -EOPNOTSUPP; + break; + } } return ret; -- cgit From d3062e38723cb55f0530b0a2bd26b64a4cd29e92 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 11 Apr 2017 23:22:34 +0100 Subject: phylink: add in-band autonegotiation support for 10GBase-KR mode. Add in-band autonegotation support for 10GBase-KR mode. Reviewed-by: Andrew Lunn Signed-off-by: Russell King --- drivers/net/phy/phylink.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index dc0f4d7b7dd2..32917bdd1432 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -266,6 +266,23 @@ static int phylink_parse_mode(struct phylink *pl, struct device_node *np) pl->link_an_mode = MLO_AN_8023Z; break; + case PHY_INTERFACE_MODE_10GKR: + phylink_set(pl->supported, 10baseT_Half); + phylink_set(pl->supported, 10baseT_Full); + phylink_set(pl->supported, 100baseT_Half); + phylink_set(pl->supported, 100baseT_Full); + phylink_set(pl->supported, 1000baseT_Half); + phylink_set(pl->supported, 1000baseT_Full); + phylink_set(pl->supported, 1000baseX_Full); + phylink_set(pl->supported, 10000baseKR_Full); + phylink_set(pl->supported, 10000baseCR_Full); + phylink_set(pl->supported, 10000baseSR_Full); + phylink_set(pl->supported, 10000baseLR_Full); + phylink_set(pl->supported, 10000baseLRM_Full); + phylink_set(pl->supported, 10000baseER_Full); + pl->link_an_mode = MLO_AN_SGMII; + break; + default: netdev_err(pl->netdev, "incorrect link mode %s for in-band status\n", -- cgit From f2ca71a2c3418fe8c97aae39ec5303fefed8366d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 12 Sep 2015 18:43:39 +0100 Subject: sfp: add SFP module support Add support for SFP hotpluggable modules via sfp-bus and phylink. This supports both copper and optical SFP modules, which require different Serdes modes in order to properly negotiate the link. Optical SFP modules typically require the Serdes link to be talking 1000BaseX mode - this is the gigabit ethernet mode defined by the 802.3 standard. Copper SFP modules typically integrate a PHY in the module to convert from Serdes to copper, and the PHY will be configured by the vendor to either present a 1000BaseX Serdes link (for fixed 1000BaseT) or a SGMII Serdes link. However, this is vendor defined, so we instead detect the PHY, switch the link to SGMII mode, and use traditional PHY based negotiation. Signed-off-by: Russell King --- drivers/net/phy/Kconfig | 5 + drivers/net/phy/Makefile | 1 + drivers/net/phy/sfp.c | 915 +++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 921 insertions(+) create mode 100644 drivers/net/phy/sfp.c diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index a0a9e03e2f80..bf73969a9d2b 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -200,6 +200,11 @@ config LED_TRIGGER_PHY comment "MII PHY device drivers" +config SFP + tristate "SFP cage support" + depends on I2C && PHYLINK + select MDIO_I2C + config AMD_PHY tristate "AMD PHYs" ---help--- diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 4c16a10f420e..7237255bad68 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o +obj-$(CONFIG_SFP) += sfp.o sfp-obj-$(CONFIG_SFP) += sfp-bus.o obj-y += $(sfp-obj-y) $(sfp-obj-m) diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c new file mode 100644 index 000000000000..fb2cf4342f48 --- /dev/null +++ b/drivers/net/phy/sfp.c @@ -0,0 +1,915 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mdio-i2c.h" +#include "sfp.h" +#include "swphy.h" + +enum { + GPIO_MODDEF0, + GPIO_LOS, + GPIO_TX_FAULT, + GPIO_TX_DISABLE, + GPIO_RATE_SELECT, + GPIO_MAX, + + SFP_F_PRESENT = BIT(GPIO_MODDEF0), + SFP_F_LOS = BIT(GPIO_LOS), + SFP_F_TX_FAULT = BIT(GPIO_TX_FAULT), + SFP_F_TX_DISABLE = BIT(GPIO_TX_DISABLE), + SFP_F_RATE_SELECT = BIT(GPIO_RATE_SELECT), + + SFP_E_INSERT = 0, + SFP_E_REMOVE, + SFP_E_DEV_DOWN, + SFP_E_DEV_UP, + SFP_E_TX_FAULT, + SFP_E_TX_CLEAR, + SFP_E_LOS_HIGH, + SFP_E_LOS_LOW, + SFP_E_TIMEOUT, + + SFP_MOD_EMPTY = 0, + SFP_MOD_PROBE, + SFP_MOD_PRESENT, + SFP_MOD_ERROR, + + SFP_DEV_DOWN = 0, + SFP_DEV_UP, + + SFP_S_DOWN = 0, + SFP_S_INIT, + SFP_S_WAIT_LOS, + SFP_S_LINK_UP, + SFP_S_TX_FAULT, + SFP_S_REINIT, + SFP_S_TX_DISABLE, +}; + +static const char *gpio_of_names[] = { + "moddef0", + "los", + "tx-fault", + "tx-disable", + "rate-select", +}; + +static const enum gpiod_flags gpio_flags[] = { + GPIOD_IN, + GPIOD_IN, + GPIOD_IN, + GPIOD_ASIS, + GPIOD_ASIS, +}; + +#define T_INIT_JIFFIES msecs_to_jiffies(300) +#define T_RESET_US 10 +#define T_FAULT_RECOVER msecs_to_jiffies(1000) + +/* SFP module presence detection is poor: the three MOD DEF signals are + * the same length on the PCB, which means it's possible for MOD DEF 0 to + * connect before the I2C bus on MOD DEF 1/2. + * + * The SFP MSA specifies 300ms as t_init (the time taken for TX_FAULT to + * be deasserted) but makes no mention of the earliest time before we can + * access the I2C EEPROM. However, Avago modules require 300ms. + */ +#define T_PROBE_INIT msecs_to_jiffies(300) +#define T_PROBE_RETRY msecs_to_jiffies(100) + +/* + * SFP modules appear to always have their PHY configured for bus address + * 0x56 (which with mdio-i2c, translates to a PHY address of 22). + */ +#define SFP_PHY_ADDR 22 + +/* + * Give this long for the PHY to reset. + */ +#define T_PHY_RESET_MS 50 + +static DEFINE_MUTEX(sfp_mutex); + +struct sfp { + struct device *dev; + struct i2c_adapter *i2c; + struct mii_bus *i2c_mii; + struct sfp_bus *sfp_bus; + struct phy_device *mod_phy; + + unsigned int (*get_state)(struct sfp *); + void (*set_state)(struct sfp *, unsigned int); + int (*read)(struct sfp *, bool, u8, void *, size_t); + + struct gpio_desc *gpio[GPIO_MAX]; + + unsigned int state; + struct delayed_work poll; + struct delayed_work timeout; + struct mutex sm_mutex; + unsigned char sm_mod_state; + unsigned char sm_dev_state; + unsigned short sm_state; + unsigned int sm_retries; + + struct sfp_eeprom_id id; +}; + +static unsigned long poll_jiffies; + +static unsigned int sfp_gpio_get_state(struct sfp *sfp) +{ + unsigned int i, state, v; + + for (i = state = 0; i < GPIO_MAX; i++) { + if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i]) + continue; + + v = gpiod_get_value_cansleep(sfp->gpio[i]); + if (v) + state |= BIT(i); + } + + return state; +} + +static void sfp_gpio_set_state(struct sfp *sfp, unsigned int state) +{ + if (state & SFP_F_PRESENT) { + /* If the module is present, drive the signals */ + if (sfp->gpio[GPIO_TX_DISABLE]) + gpiod_direction_output(sfp->gpio[GPIO_TX_DISABLE], + state & SFP_F_TX_DISABLE); + if (state & SFP_F_RATE_SELECT) + gpiod_direction_output(sfp->gpio[GPIO_RATE_SELECT], + state & SFP_F_RATE_SELECT); + } else { + /* Otherwise, let them float to the pull-ups */ + if (sfp->gpio[GPIO_TX_DISABLE]) + gpiod_direction_input(sfp->gpio[GPIO_TX_DISABLE]); + if (state & SFP_F_RATE_SELECT) + gpiod_direction_input(sfp->gpio[GPIO_RATE_SELECT]); + } +} + +static int sfp__i2c_read(struct i2c_adapter *i2c, u8 bus_addr, u8 dev_addr, + void *buf, size_t len) +{ + struct i2c_msg msgs[2]; + int ret; + + msgs[0].addr = bus_addr; + msgs[0].flags = 0; + msgs[0].len = 1; + msgs[0].buf = &dev_addr; + msgs[1].addr = bus_addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = len; + msgs[1].buf = buf; + + ret = i2c_transfer(i2c, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + return ret; + + return ret == ARRAY_SIZE(msgs) ? len : 0; +} + +static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 addr, void *buf, + size_t len) +{ + return sfp__i2c_read(sfp->i2c, a2 ? 0x51 : 0x50, addr, buf, len); +} + +static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c) +{ + struct mii_bus *i2c_mii; + int ret; + + if (!i2c_check_functionality(i2c, I2C_FUNC_I2C)) + return -EINVAL; + + sfp->i2c = i2c; + sfp->read = sfp_i2c_read; + + i2c_mii = mdio_i2c_alloc(sfp->dev, i2c); + if (IS_ERR(i2c_mii)) + return PTR_ERR(i2c_mii); + + i2c_mii->name = "SFP I2C Bus"; + i2c_mii->phy_mask = ~0; + + ret = mdiobus_register(i2c_mii); + if (ret < 0) { + mdiobus_free(i2c_mii); + return ret; + } + + sfp->i2c_mii = i2c_mii; + + return 0; +} + + +/* Interface */ +static unsigned int sfp_get_state(struct sfp *sfp) +{ + return sfp->get_state(sfp); +} + +static void sfp_set_state(struct sfp *sfp, unsigned int state) +{ + sfp->set_state(sfp, state); +} + +static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len) +{ + return sfp->read(sfp, a2, addr, buf, len); +} + +static unsigned int sfp_check(void *buf, size_t len) +{ + u8 *p, check; + + for (p = buf, check = 0; len; p++, len--) + check += *p; + + return check; +} + +/* Helpers */ +static void sfp_module_tx_disable(struct sfp *sfp) +{ + dev_dbg(sfp->dev, "tx disable %u -> %u\n", + sfp->state & SFP_F_TX_DISABLE ? 1 : 0, 1); + sfp->state |= SFP_F_TX_DISABLE; + sfp_set_state(sfp, sfp->state); +} + +static void sfp_module_tx_enable(struct sfp *sfp) +{ + dev_dbg(sfp->dev, "tx disable %u -> %u\n", + sfp->state & SFP_F_TX_DISABLE ? 1 : 0, 0); + sfp->state &= ~SFP_F_TX_DISABLE; + sfp_set_state(sfp, sfp->state); +} + +static void sfp_module_tx_fault_reset(struct sfp *sfp) +{ + unsigned int state = sfp->state; + + if (state & SFP_F_TX_DISABLE) + return; + + sfp_set_state(sfp, state | SFP_F_TX_DISABLE); + + udelay(T_RESET_US); + + sfp_set_state(sfp, state); +} + +/* SFP state machine */ +static void sfp_sm_set_timer(struct sfp *sfp, unsigned int timeout) +{ + if (timeout) + mod_delayed_work(system_power_efficient_wq, &sfp->timeout, + timeout); + else + cancel_delayed_work(&sfp->timeout); +} + +static void sfp_sm_next(struct sfp *sfp, unsigned int state, + unsigned int timeout) +{ + sfp->sm_state = state; + sfp_sm_set_timer(sfp, timeout); +} + +static void sfp_sm_ins_next(struct sfp *sfp, unsigned int state, unsigned int timeout) +{ + sfp->sm_mod_state = state; + sfp_sm_set_timer(sfp, timeout); +} + +static void sfp_sm_phy_detach(struct sfp *sfp) +{ + phy_stop(sfp->mod_phy); + sfp_remove_phy(sfp->sfp_bus); + phy_device_remove(sfp->mod_phy); + phy_device_free(sfp->mod_phy); + sfp->mod_phy = NULL; +} + +static void sfp_sm_probe_phy(struct sfp *sfp) +{ + struct phy_device *phy; + int err; + + msleep(T_PHY_RESET_MS); + + phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR); + if (IS_ERR(phy)) { + dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy)); + return; + } + if (!phy) { + dev_info(sfp->dev, "no PHY detected\n"); + return; + } + + err = sfp_add_phy(sfp->sfp_bus, phy); + if (err) { + phy_device_remove(phy); + phy_device_free(phy); + dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err); + return; + } + + sfp->mod_phy = phy; + phy_start(phy); +} + +static void sfp_sm_link_up(struct sfp *sfp) +{ + sfp_link_up(sfp->sfp_bus); + sfp_sm_next(sfp, SFP_S_LINK_UP, 0); +} + +static void sfp_sm_link_down(struct sfp *sfp) +{ + sfp_link_down(sfp->sfp_bus); +} + +static void sfp_sm_link_check_los(struct sfp *sfp) +{ + unsigned int los = sfp->state & SFP_F_LOS; + + /* FIXME: what if neither SFP_OPTIONS_LOS_INVERTED nor + * SFP_OPTIONS_LOS_NORMAL are set? For now, we assume + * the same as SFP_OPTIONS_LOS_NORMAL set. + */ + if (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED) + los ^= SFP_F_LOS; + + if (los) + sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0); + else + sfp_sm_link_up(sfp); +} + +static void sfp_sm_fault(struct sfp *sfp, bool warn) +{ + if (sfp->sm_retries && !--sfp->sm_retries) { + dev_err(sfp->dev, "module persistently indicates fault, disabling\n"); + sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0); + } else { + if (warn) + dev_err(sfp->dev, "module transmit fault indicated\n"); + + sfp_sm_next(sfp, SFP_S_TX_FAULT, T_FAULT_RECOVER); + } +} + +static void sfp_sm_mod_init(struct sfp *sfp) +{ + sfp_module_tx_enable(sfp); + + /* Wait t_init before indicating that the link is up, provided the + * current state indicates no TX_FAULT. If TX_FAULT clears before + * this time, that's fine too. + */ + sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES); + sfp->sm_retries = 5; + + /* Setting the serdes link mode is guesswork: there's no + * field in the EEPROM which indicates what mode should + * be used. + * + * If it's a gigabit-only fiber module, it probably does + * not have a PHY, so switch to 802.3z negotiation mode. + * Otherwise, switch to SGMII mode (which is required to + * support non-gigabit speeds) and probe for a PHY. + */ + if (sfp->id.base.e1000_base_t || + sfp->id.base.e100_base_lx || + sfp->id.base.e100_base_fx) + sfp_sm_probe_phy(sfp); +} + +static int sfp_sm_mod_probe(struct sfp *sfp) +{ + /* SFP module inserted - read I2C data */ + struct sfp_eeprom_id id; + char vendor[17]; + char part[17]; + char sn[17]; + char date[9]; + char rev[5]; + u8 check; + int err; + + err = sfp_read(sfp, false, 0, &id, sizeof(id)); + if (err < 0) { + dev_err(sfp->dev, "failed to read EEPROM: %d\n", err); + return -EAGAIN; + } + + if (err != sizeof(id)) { + dev_err(sfp->dev, "EEPROM short read: %d\n", err); + return -EAGAIN; + } + + /* Validate the checksum over the base structure */ + check = sfp_check(&id.base, sizeof(id.base) - 1); + if (check != id.base.cc_base) { + dev_err(sfp->dev, + "EEPROM base structure checksum failure: 0x%02x\n", + check); + print_hex_dump(KERN_ERR, "sfp EE: ", DUMP_PREFIX_OFFSET, + 16, 1, &id, sizeof(id.base) - 1, true); + return -EINVAL; + } + + check = sfp_check(&id.ext, sizeof(id.ext) - 1); + if (check != id.ext.cc_ext) { + dev_err(sfp->dev, + "EEPROM extended structure checksum failure: 0x%02x\n", + check); + memset(&id.ext, 0, sizeof(id.ext)); + } + + sfp->id = id; + + memcpy(vendor, sfp->id.base.vendor_name, 16); + vendor[16] = '\0'; + memcpy(part, sfp->id.base.vendor_pn, 16); + part[16] = '\0'; + memcpy(rev, sfp->id.base.vendor_rev, 4); + rev[4] = '\0'; + memcpy(sn, sfp->id.ext.vendor_sn, 16); + sn[16] = '\0'; + memcpy(date, sfp->id.ext.datecode, 8); + date[8] = '\0'; + + dev_info(sfp->dev, "module %s %s rev %s sn %s dc %s\n", vendor, part, rev, sn, date); + + /* We only support SFP modules, not the legacy GBIC modules. */ + if (sfp->id.base.phys_id != SFP_PHYS_ID_SFP || + sfp->id.base.phys_ext_id != SFP_PHYS_EXT_ID_SFP) { + dev_err(sfp->dev, "module is not SFP - phys id 0x%02x 0x%02x\n", + sfp->id.base.phys_id, sfp->id.base.phys_ext_id); + return -EINVAL; + } + + return sfp_module_insert(sfp->sfp_bus, &sfp->id); +} + +static void sfp_sm_mod_remove(struct sfp *sfp) +{ + sfp_module_remove(sfp->sfp_bus); + + if (sfp->mod_phy) + sfp_sm_phy_detach(sfp); + + sfp_module_tx_disable(sfp); + + memset(&sfp->id, 0, sizeof(sfp->id)); + + dev_info(sfp->dev, "module removed\n"); +} + +static void sfp_sm_event(struct sfp *sfp, unsigned int event) +{ + mutex_lock(&sfp->sm_mutex); + + dev_dbg(sfp->dev, "SM: enter %u:%u:%u event %u\n", + sfp->sm_mod_state, sfp->sm_dev_state, sfp->sm_state, event); + + /* This state machine tracks the insert/remove state of + * the module, and handles probing the on-board EEPROM. + */ + switch (sfp->sm_mod_state) { + default: + if (event == SFP_E_INSERT) { + sfp_module_tx_disable(sfp); + sfp_sm_ins_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT); + } + break; + + case SFP_MOD_PROBE: + if (event == SFP_E_REMOVE) { + sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0); + } else if (event == SFP_E_TIMEOUT) { + int err = sfp_sm_mod_probe(sfp); + + if (err == 0) + sfp_sm_ins_next(sfp, SFP_MOD_PRESENT, 0); + else if (err == -EAGAIN) + sfp_sm_set_timer(sfp, T_PROBE_RETRY); + else + sfp_sm_ins_next(sfp, SFP_MOD_ERROR, 0); + } + break; + + case SFP_MOD_PRESENT: + case SFP_MOD_ERROR: + if (event == SFP_E_REMOVE) { + sfp_sm_mod_remove(sfp); + sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0); + } + break; + } + + /* This state machine tracks the netdev up/down state */ + switch (sfp->sm_dev_state) { + default: + if (event == SFP_E_DEV_UP) + sfp->sm_dev_state = SFP_DEV_UP; + break; + + case SFP_DEV_UP: + if (event == SFP_E_DEV_DOWN) { + /* If the module has a PHY, avoid raising TX disable + * as this resets the PHY. Otherwise, raise it to + * turn the laser off. + */ + if (!sfp->mod_phy) + sfp_module_tx_disable(sfp); + sfp->sm_dev_state = SFP_DEV_DOWN; + } + break; + } + + /* Some events are global */ + if (sfp->sm_state != SFP_S_DOWN && + (sfp->sm_mod_state != SFP_MOD_PRESENT || + sfp->sm_dev_state != SFP_DEV_UP)) { + if (sfp->sm_state == SFP_S_LINK_UP && + sfp->sm_dev_state == SFP_DEV_UP) + sfp_sm_link_down(sfp); + if (sfp->mod_phy) + sfp_sm_phy_detach(sfp); + sfp_sm_next(sfp, SFP_S_DOWN, 0); + mutex_unlock(&sfp->sm_mutex); + return; + } + + /* The main state machine */ + switch (sfp->sm_state) { + case SFP_S_DOWN: + if (sfp->sm_mod_state == SFP_MOD_PRESENT && + sfp->sm_dev_state == SFP_DEV_UP) + sfp_sm_mod_init(sfp); + break; + + case SFP_S_INIT: + if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) + sfp_sm_fault(sfp, true); + else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) + sfp_sm_link_check_los(sfp); + break; + + case SFP_S_WAIT_LOS: + if (event == SFP_E_TX_FAULT) + sfp_sm_fault(sfp, true); + else if (event == + (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED ? + SFP_E_LOS_HIGH : SFP_E_LOS_LOW)) + sfp_sm_link_up(sfp); + break; + + case SFP_S_LINK_UP: + if (event == SFP_E_TX_FAULT) { + sfp_sm_link_down(sfp); + sfp_sm_fault(sfp, true); + } else if (event == + (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED ? + SFP_E_LOS_LOW : SFP_E_LOS_HIGH)) { + sfp_sm_link_down(sfp); + sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0); + } + break; + + case SFP_S_TX_FAULT: + if (event == SFP_E_TIMEOUT) { + sfp_module_tx_fault_reset(sfp); + sfp_sm_next(sfp, SFP_S_REINIT, T_INIT_JIFFIES); + } + break; + + case SFP_S_REINIT: + if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) { + sfp_sm_fault(sfp, false); + } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) { + dev_info(sfp->dev, "module transmit fault recovered\n"); + sfp_sm_link_check_los(sfp); + } + break; + + case SFP_S_TX_DISABLE: + break; + } + + dev_dbg(sfp->dev, "SM: exit %u:%u:%u\n", + sfp->sm_mod_state, sfp->sm_dev_state, sfp->sm_state); + + mutex_unlock(&sfp->sm_mutex); +} + +static void sfp_start(struct sfp *sfp) +{ + sfp_sm_event(sfp, SFP_E_DEV_UP); +} + +static void sfp_stop(struct sfp *sfp) +{ + sfp_sm_event(sfp, SFP_E_DEV_DOWN); +} + +static int sfp_module_info(struct sfp *sfp, struct ethtool_modinfo *modinfo) +{ + /* locking... and check module is present */ + + if (sfp->id.ext.sff8472_compliance) { + modinfo->type = ETH_MODULE_SFF_8472; + modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; + } else { + modinfo->type = ETH_MODULE_SFF_8079; + modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN; + } + return 0; +} + +static int sfp_module_eeprom(struct sfp *sfp, struct ethtool_eeprom *ee, + u8 *data) +{ + unsigned int first, last, len; + int ret; + + if (ee->len == 0) + return -EINVAL; + + first = ee->offset; + last = ee->offset + ee->len; + if (first < ETH_MODULE_SFF_8079_LEN) { + len = min_t(unsigned int, last, ETH_MODULE_SFF_8079_LEN); + len -= first; + + ret = sfp->read(sfp, false, first, data, len); + if (ret < 0) + return ret; + + first += len; + data += len; + } + if (first >= ETH_MODULE_SFF_8079_LEN && + first < ETH_MODULE_SFF_8472_LEN) { + len = min_t(unsigned int, last, ETH_MODULE_SFF_8472_LEN); + len -= first; + first -= ETH_MODULE_SFF_8079_LEN; + + ret = sfp->read(sfp, true, first, data, len); + if (ret < 0) + return ret; + } + return 0; +} + +static const struct sfp_socket_ops sfp_module_ops = { + .start = sfp_start, + .stop = sfp_stop, + .module_info = sfp_module_info, + .module_eeprom = sfp_module_eeprom, +}; + +static void sfp_timeout(struct work_struct *work) +{ + struct sfp *sfp = container_of(work, struct sfp, timeout.work); + + rtnl_lock(); + sfp_sm_event(sfp, SFP_E_TIMEOUT); + rtnl_unlock(); +} + +static void sfp_check_state(struct sfp *sfp) +{ + unsigned int state, i, changed; + + state = sfp_get_state(sfp); + changed = state ^ sfp->state; + changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT; + + for (i = 0; i < GPIO_MAX; i++) + if (changed & BIT(i)) + dev_dbg(sfp->dev, "%s %u -> %u\n", gpio_of_names[i], + !!(sfp->state & BIT(i)), !!(state & BIT(i))); + + state |= sfp->state & (SFP_F_TX_DISABLE | SFP_F_RATE_SELECT); + sfp->state = state; + + rtnl_lock(); + if (changed & SFP_F_PRESENT) + sfp_sm_event(sfp, state & SFP_F_PRESENT ? + SFP_E_INSERT : SFP_E_REMOVE); + + if (changed & SFP_F_TX_FAULT) + sfp_sm_event(sfp, state & SFP_F_TX_FAULT ? + SFP_E_TX_FAULT : SFP_E_TX_CLEAR); + + if (changed & SFP_F_LOS) + sfp_sm_event(sfp, state & SFP_F_LOS ? + SFP_E_LOS_HIGH : SFP_E_LOS_LOW); + rtnl_unlock(); +} + +static irqreturn_t sfp_irq(int irq, void *data) +{ + struct sfp *sfp = data; + + sfp_check_state(sfp); + + return IRQ_HANDLED; +} + +static void sfp_poll(struct work_struct *work) +{ + struct sfp *sfp = container_of(work, struct sfp, poll.work); + + sfp_check_state(sfp); + mod_delayed_work(system_wq, &sfp->poll, poll_jiffies); +} + +static struct sfp *sfp_alloc(struct device *dev) +{ + struct sfp *sfp; + + sfp = kzalloc(sizeof(*sfp), GFP_KERNEL); + if (!sfp) + return ERR_PTR(-ENOMEM); + + sfp->dev = dev; + + mutex_init(&sfp->sm_mutex); + INIT_DELAYED_WORK(&sfp->poll, sfp_poll); + INIT_DELAYED_WORK(&sfp->timeout, sfp_timeout); + + return sfp; +} + +static void sfp_cleanup(void *data) +{ + struct sfp *sfp = data; + + cancel_delayed_work_sync(&sfp->poll); + cancel_delayed_work_sync(&sfp->timeout); + if (sfp->i2c_mii) { + mdiobus_unregister(sfp->i2c_mii); + mdiobus_free(sfp->i2c_mii); + } + if (sfp->i2c) + i2c_put_adapter(sfp->i2c); + kfree(sfp); +} + +static int sfp_probe(struct platform_device *pdev) +{ + struct sfp *sfp; + bool poll = false; + int irq, err, i; + + sfp = sfp_alloc(&pdev->dev); + if (IS_ERR(sfp)) + return PTR_ERR(sfp); + + platform_set_drvdata(pdev, sfp); + + err = devm_add_action(sfp->dev, sfp_cleanup, sfp); + if (err < 0) + return err; + + if (pdev->dev.of_node) { + struct device_node *node = pdev->dev.of_node; + struct device_node *np; + + np = of_parse_phandle(node, "i2c-bus", 0); + if (np) { + struct i2c_adapter *i2c; + + i2c = of_find_i2c_adapter_by_node(np); + of_node_put(np); + if (!i2c) + return -EPROBE_DEFER; + + err = sfp_i2c_configure(sfp, i2c); + if (err < 0) { + i2c_put_adapter(i2c); + return err; + } + } + + for (i = 0; i < GPIO_MAX; i++) { + sfp->gpio[i] = devm_gpiod_get_optional(sfp->dev, + gpio_of_names[i], gpio_flags[i]); + if (IS_ERR(sfp->gpio[i])) + return PTR_ERR(sfp->gpio[i]); + } + + sfp->get_state = sfp_gpio_get_state; + sfp->set_state = sfp_gpio_set_state; + } + + sfp->sfp_bus = sfp_register_socket(sfp->dev, sfp, &sfp_module_ops); + if (!sfp->sfp_bus) + return -ENOMEM; + + /* Get the initial state, and always signal TX disable, + * since the network interface will not be up. + */ + sfp->state = sfp_get_state(sfp) | SFP_F_TX_DISABLE; + + if (sfp->gpio[GPIO_RATE_SELECT] && + gpiod_get_value_cansleep(sfp->gpio[GPIO_RATE_SELECT])) + sfp->state |= SFP_F_RATE_SELECT; + sfp_set_state(sfp, sfp->state); + sfp_module_tx_disable(sfp); + rtnl_lock(); + if (sfp->state & SFP_F_PRESENT) + sfp_sm_event(sfp, SFP_E_INSERT); + rtnl_unlock(); + + for (i = 0; i < GPIO_MAX; i++) { + if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i]) + continue; + + irq = gpiod_to_irq(sfp->gpio[i]); + if (!irq) { + poll = true; + continue; + } + + err = devm_request_threaded_irq(sfp->dev, irq, NULL, sfp_irq, + IRQF_ONESHOT | + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + dev_name(sfp->dev), sfp); + if (err) + poll = true; + } + + if (poll) + mod_delayed_work(system_wq, &sfp->poll, poll_jiffies); + + return 0; +} + +static int sfp_remove(struct platform_device *pdev) +{ + struct sfp *sfp = platform_get_drvdata(pdev); + + sfp_unregister_socket(sfp->sfp_bus); + + return 0; +} + +static const struct of_device_id sfp_of_match[] = { + { .compatible = "sff,sfp", }, + { }, +}; +MODULE_DEVICE_TABLE(of, sfp_of_match); + +static struct platform_driver sfp_driver = { + .probe = sfp_probe, + .remove = sfp_remove, + .driver = { + .name = "sfp", + .of_match_table = sfp_of_match, + }, +}; + +static int sfp_init(void) +{ + poll_jiffies = msecs_to_jiffies(100); + + return platform_driver_register(&sfp_driver); +} +module_init(sfp_init); + +static void sfp_exit(void) +{ + platform_driver_unregister(&sfp_driver); +} +module_exit(sfp_exit); + +MODULE_ALIAS("platform:sfp"); +MODULE_AUTHOR("Russell King"); +MODULE_LICENSE("GPL v2"); -- cgit From e9efc8476ccfecd6db7def5ed3f12619735f60c2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 13 Sep 2015 01:06:31 +0100 Subject: sfp: display SFP module information Signed-off-by: Russell King --- drivers/net/phy/sfp.c | 254 +++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 253 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index fb2cf4342f48..310426774ff8 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -247,6 +247,184 @@ static unsigned int sfp_check(void *buf, size_t len) return check; } +static const char *sfp_link_len(char *buf, size_t size, unsigned int length, + unsigned int multiplier) +{ + if (length == 0) + return "unsupported/unspecified"; + + if (length == 255) { + *buf++ = '>'; + size -= 1; + length -= 1; + } + + length *= multiplier; + + if (length >= 1000) + snprintf(buf, size, "%u.%0*ukm", + length / 1000, + multiplier > 100 ? 1 : + multiplier > 10 ? 2 : 3, + length % 1000); + else + snprintf(buf, size, "%um", length); + + return buf; +} + +struct bitfield { + unsigned int mask; + unsigned int val; + const char *str; +}; + +static const struct bitfield sfp_options[] = { + { + .mask = SFP_OPTIONS_HIGH_POWER_LEVEL, + .val = SFP_OPTIONS_HIGH_POWER_LEVEL, + .str = "hpl", + }, { + .mask = SFP_OPTIONS_PAGING_A2, + .val = SFP_OPTIONS_PAGING_A2, + .str = "paginga2", + }, { + .mask = SFP_OPTIONS_RETIMER, + .val = SFP_OPTIONS_RETIMER, + .str = "retimer", + }, { + .mask = SFP_OPTIONS_COOLED_XCVR, + .val = SFP_OPTIONS_COOLED_XCVR, + .str = "cooled", + }, { + .mask = SFP_OPTIONS_POWER_DECL, + .val = SFP_OPTIONS_POWER_DECL, + .str = "powerdecl", + }, { + .mask = SFP_OPTIONS_RX_LINEAR_OUT, + .val = SFP_OPTIONS_RX_LINEAR_OUT, + .str = "rxlinear", + }, { + .mask = SFP_OPTIONS_RX_DECISION_THRESH, + .val = SFP_OPTIONS_RX_DECISION_THRESH, + .str = "rxthresh", + }, { + .mask = SFP_OPTIONS_TUNABLE_TX, + .val = SFP_OPTIONS_TUNABLE_TX, + .str = "tunabletx", + }, { + .mask = SFP_OPTIONS_RATE_SELECT, + .val = SFP_OPTIONS_RATE_SELECT, + .str = "ratesel", + }, { + .mask = SFP_OPTIONS_TX_DISABLE, + .val = SFP_OPTIONS_TX_DISABLE, + .str = "txdisable", + }, { + .mask = SFP_OPTIONS_TX_FAULT, + .val = SFP_OPTIONS_TX_FAULT, + .str = "txfault", + }, { + .mask = SFP_OPTIONS_LOS_INVERTED, + .val = SFP_OPTIONS_LOS_INVERTED, + .str = "los-", + }, { + .mask = SFP_OPTIONS_LOS_NORMAL, + .val = SFP_OPTIONS_LOS_NORMAL, + .str = "los+", + }, { } +}; + +static const struct bitfield diagmon[] = { + { + .mask = SFP_DIAGMON_DDM, + .val = SFP_DIAGMON_DDM, + .str = "ddm", + }, { + .mask = SFP_DIAGMON_INT_CAL, + .val = SFP_DIAGMON_INT_CAL, + .str = "intcal", + }, { + .mask = SFP_DIAGMON_EXT_CAL, + .val = SFP_DIAGMON_EXT_CAL, + .str = "extcal", + }, { + .mask = SFP_DIAGMON_RXPWR_AVG, + .val = SFP_DIAGMON_RXPWR_AVG, + .str = "rxpwravg", + }, { } +}; + +static const char *sfp_bitfield(char *out, size_t outsz, const struct bitfield *bits, unsigned int val) +{ + char *p = out; + int n; + + *p = '\0'; + while (bits->mask) { + if ((val & bits->mask) == bits->val) { + n = snprintf(p, outsz, "%s%s", + out != p ? ", " : "", + bits->str); + if (n == outsz) + break; + p += n; + outsz -= n; + } + bits++; + } + + return out; +} + +static const char *sfp_connector(unsigned int connector) +{ + switch (connector) { + case SFP_CONNECTOR_UNSPEC: + return "unknown/unspecified"; + case SFP_CONNECTOR_SC: + return "SC"; + case SFP_CONNECTOR_FIBERJACK: + return "Fiberjack"; + case SFP_CONNECTOR_LC: + return "LC"; + case SFP_CONNECTOR_MT_RJ: + return "MT-RJ"; + case SFP_CONNECTOR_MU: + return "MU"; + case SFP_CONNECTOR_SG: + return "SG"; + case SFP_CONNECTOR_OPTICAL_PIGTAIL: + return "Optical pigtail"; + case SFP_CONNECTOR_HSSDC_II: + return "HSSDC II"; + case SFP_CONNECTOR_COPPER_PIGTAIL: + return "Copper pigtail"; + default: + return "unknown"; + } +} + +static const char *sfp_encoding(unsigned int encoding) +{ + switch (encoding) { + case SFP_ENCODING_UNSPEC: + return "unspecified"; + case SFP_ENCODING_8472_64B66B: + return "64b66b"; + case SFP_ENCODING_8B10B: + return "8b10b"; + case SFP_ENCODING_4B5B: + return "4b5b"; + case SFP_ENCODING_NRZ: + return "NRZ"; + case SFP_ENCODING_8472_MANCHESTER: + return "MANCHESTER"; + default: + return "unknown"; + } +} + /* Helpers */ static void sfp_module_tx_disable(struct sfp *sfp) { @@ -415,6 +593,7 @@ static int sfp_sm_mod_probe(struct sfp *sfp) char sn[17]; char date[9]; char rev[5]; + char options[80]; u8 check; int err; @@ -458,10 +637,83 @@ static int sfp_sm_mod_probe(struct sfp *sfp) rev[4] = '\0'; memcpy(sn, sfp->id.ext.vendor_sn, 16); sn[16] = '\0'; - memcpy(date, sfp->id.ext.datecode, 8); + date[0] = sfp->id.ext.datecode[4]; + date[1] = sfp->id.ext.datecode[5]; + date[2] = '-'; + date[3] = sfp->id.ext.datecode[2]; + date[4] = sfp->id.ext.datecode[3]; + date[5] = '-'; + date[6] = sfp->id.ext.datecode[0]; + date[7] = sfp->id.ext.datecode[1]; date[8] = '\0'; dev_info(sfp->dev, "module %s %s rev %s sn %s dc %s\n", vendor, part, rev, sn, date); + dev_info(sfp->dev, " %s connector, encoding %s, nominal bitrate %u.%uGbps +%u%% -%u%%\n", + sfp_connector(sfp->id.base.connector), + sfp_encoding(sfp->id.base.encoding), + sfp->id.base.br_nominal / 10, + sfp->id.base.br_nominal % 10, + sfp->id.ext.br_max, sfp->id.ext.br_min); + dev_info(sfp->dev, " 1000BaseSX%c 1000BaseLX%c 1000BaseCX%c 1000BaseT%c 100BaseTLX%c 1000BaseFX%c BaseBX10%c BasePX%c\n", + sfp->id.base.e1000_base_sx ? '+' : '-', + sfp->id.base.e1000_base_lx ? '+' : '-', + sfp->id.base.e1000_base_cx ? '+' : '-', + sfp->id.base.e1000_base_t ? '+' : '-', + sfp->id.base.e100_base_lx ? '+' : '-', + sfp->id.base.e100_base_fx ? '+' : '-', + sfp->id.base.e_base_bx10 ? '+' : '-', + sfp->id.base.e_base_px ? '+' : '-'); + dev_info(sfp->dev, " 10GBaseSR%c 10GBaseLR%c 10GBaseLRM%c 10GBaseER%c\n", + sfp->id.base.e10g_base_sr ? '+' : '-', + sfp->id.base.e10g_base_lr ? '+' : '-', + sfp->id.base.e10g_base_lrm ? '+' : '-', + sfp->id.base.e10g_base_er ? '+' : '-'); + + if (!sfp->id.base.sfp_ct_passive && !sfp->id.base.sfp_ct_active && + !sfp->id.base.e1000_base_t) { + char len_9um[16], len_om[16]; + + dev_info(sfp->dev, " Wavelength %unm, fiber lengths:\n", + be16_to_cpup(&sfp->id.base.optical_wavelength)); + + if (sfp->id.base.link_len[0] == 255) + strcpy(len_9um, ">254km"); + else if (sfp->id.base.link_len[1] && sfp->id.base.link_len[1] != 255) + sprintf(len_9um, "%um", + sfp->id.base.link_len[1] * 100); + else if (sfp->id.base.link_len[0]) + sprintf(len_9um, "%ukm", sfp->id.base.link_len[0]); + else if (sfp->id.base.link_len[1] == 255) + strcpy(len_9um, ">25.4km"); + else + strcpy(len_9um, "unsupported"); + + dev_info(sfp->dev, " 9µm SM : %s\n", len_9um); + dev_info(sfp->dev, " 62.5µm MM OM1: %s\n", + sfp_link_len(len_om, sizeof(len_om), + sfp->id.base.link_len[3], 10)); + dev_info(sfp->dev, " 50µm MM OM2: %s\n", + sfp_link_len(len_om, sizeof(len_om), + sfp->id.base.link_len[2], 10)); + dev_info(sfp->dev, " 50µm MM OM3: %s\n", + sfp_link_len(len_om, sizeof(len_om), + sfp->id.base.link_len[5], 10)); + dev_info(sfp->dev, " 50µm MM OM4: %s\n", + sfp_link_len(len_om, sizeof(len_om), + sfp->id.base.link_len[4], 10)); + } else { + char len[16]; + dev_info(sfp->dev, " Copper length: %s\n", + sfp_link_len(len, sizeof(len), + sfp->id.base.link_len[4], 1)); + } + + dev_info(sfp->dev, " Options: %s\n", + sfp_bitfield(options, sizeof(options), sfp_options, + be16_to_cpu(sfp->id.ext.options))); + dev_info(sfp->dev, " Diagnostics: %s\n", + sfp_bitfield(options, sizeof(options), diagmon, + sfp->id.ext.diagmon)); /* We only support SFP modules, not the legacy GBIC modules. */ if (sfp->id.base.phys_id != SFP_PHYS_ID_SFP || -- cgit From 82d2a75ab467333da62fa24a2c6e572408758a07 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 Sep 2015 21:27:10 +0100 Subject: net: mvneta: convert to phylink Convert mvneta to use phylink, which models the MAC to PHY link in a generic, reusable form. Signed-off-by: Russell King - remove unused sync status --- drivers/net/ethernet/marvell/Kconfig | 2 +- drivers/net/ethernet/marvell/mvneta.c | 594 ++++++++++++++++++++-------------- 2 files changed, 349 insertions(+), 247 deletions(-) diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig index da6fb825afea..ebe5c9148935 100644 --- a/drivers/net/ethernet/marvell/Kconfig +++ b/drivers/net/ethernet/marvell/Kconfig @@ -60,7 +60,7 @@ config MVNETA depends on ARCH_MVEBU || COMPILE_TEST depends on HAS_DMA select MVMDIO - select FIXED_PHY + select PHYLINK ---help--- This driver supports the network interface units in the Marvell ARMADA XP, ARMADA 370, ARMADA 38x and diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 0aab74c2a209..487dc0804e1a 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -28,7 +28,7 @@ #include #include #include -#include +#include #include #include #include @@ -189,6 +189,7 @@ #define MVNETA_GMAC_CTRL_0 0x2c00 #define MVNETA_GMAC_MAX_RX_SIZE_SHIFT 2 #define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc +#define MVNETA_GMAC0_PORT_1000BASE_X BIT(1) #define MVNETA_GMAC0_PORT_ENABLE BIT(0) #define MVNETA_GMAC_CTRL_2 0x2c08 #define MVNETA_GMAC2_INBAND_AN_ENABLE BIT(0) @@ -204,13 +205,19 @@ #define MVNETA_GMAC_TX_FLOW_CTRL_ENABLE BIT(5) #define MVNETA_GMAC_RX_FLOW_CTRL_ACTIVE BIT(6) #define MVNETA_GMAC_TX_FLOW_CTRL_ACTIVE BIT(7) +#define MVNETA_GMAC_AN_COMPLETE BIT(11) +#define MVNETA_GMAC_SYNC_OK BIT(14) #define MVNETA_GMAC_AUTONEG_CONFIG 0x2c0c #define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0) #define MVNETA_GMAC_FORCE_LINK_PASS BIT(1) #define MVNETA_GMAC_INBAND_AN_ENABLE BIT(2) +#define MVNETA_GMAC_AN_BYPASS_ENABLE BIT(3) +#define MVNETA_GMAC_INBAND_RESTART_AN BIT(4) #define MVNETA_GMAC_CONFIG_MII_SPEED BIT(5) #define MVNETA_GMAC_CONFIG_GMII_SPEED BIT(6) #define MVNETA_GMAC_AN_SPEED_EN BIT(7) +#define MVNETA_GMAC_CONFIG_FLOW_CTRL BIT(8) +#define MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL BIT(9) #define MVNETA_GMAC_AN_FLOW_CTRL_EN BIT(11) #define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12) #define MVNETA_GMAC_AN_DUPLEX_EN BIT(13) @@ -237,6 +244,12 @@ #define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2)) #define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff +#define MVNETA_LPI_CTRL_0 0x2cc0 +#define MVNETA_LPI_CTRL_1 0x2cc4 +#define MVNETA_LPI_REQUEST_ENABLE BIT(0) +#define MVNETA_LPI_CTRL_2 0x2cc8 +#define MVNETA_LPI_STATUS 0x2ccc + #define MVNETA_CAUSE_TXQ_SENT_DESC_ALL_MASK 0xff /* Descriptor ring Macros */ @@ -316,6 +329,11 @@ #define MVNETA_RX_GET_BM_POOL_ID(rxd) \ (((rxd)->status & MVNETA_RXD_BM_POOL_MASK) >> MVNETA_RXD_BM_POOL_SHIFT) +enum { + ETHTOOL_STAT_EEE_WAKEUP, + ETHTOOL_MAX_STATS, +}; + struct mvneta_statistic { unsigned short offset; unsigned short type; @@ -324,6 +342,7 @@ struct mvneta_statistic { #define T_REG_32 32 #define T_REG_64 64 +#define T_SW 1 static const struct mvneta_statistic mvneta_statistics[] = { { 0x3000, T_REG_64, "good_octets_received", }, @@ -358,6 +377,7 @@ static const struct mvneta_statistic mvneta_statistics[] = { { 0x304c, T_REG_32, "broadcast_frames_sent", }, { 0x3054, T_REG_32, "fc_sent", }, { 0x300c, T_REG_32, "internal_mac_transmit_err", }, + { ETHTOOL_STAT_EEE_WAKEUP, T_SW, "eee_wakeup_errors", }, }; struct mvneta_pcpu_stats { @@ -410,20 +430,19 @@ struct mvneta_port { u16 tx_ring_size; u16 rx_ring_size; - struct mii_bus *mii_bus; - phy_interface_t phy_interface; - struct device_node *phy_node; - unsigned int link; - unsigned int duplex; - unsigned int speed; + struct device_node *dn; unsigned int tx_csum_limit; - unsigned int use_inband_status:1; + struct phylink *phylink; struct mvneta_bm *bm_priv; struct mvneta_bm_pool *pool_long; struct mvneta_bm_pool *pool_short; int bm_win_id; + bool eee_enabled; + bool eee_active; + bool tx_lpi_enabled; + u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)]; u32 indir[MVNETA_RSS_LU_TABLE_SIZE]; @@ -1273,44 +1292,6 @@ static void mvneta_set_other_mcast_table(struct mvneta_port *pp, int queue) mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val); } -static void mvneta_set_autoneg(struct mvneta_port *pp, int enable) -{ - u32 val; - - if (enable) { - val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); - val &= ~(MVNETA_GMAC_FORCE_LINK_PASS | - MVNETA_GMAC_FORCE_LINK_DOWN | - MVNETA_GMAC_AN_FLOW_CTRL_EN); - val |= MVNETA_GMAC_INBAND_AN_ENABLE | - MVNETA_GMAC_AN_SPEED_EN | - MVNETA_GMAC_AN_DUPLEX_EN; - mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); - - val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER); - val |= MVNETA_GMAC_1MS_CLOCK_ENABLE; - mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val); - - val = mvreg_read(pp, MVNETA_GMAC_CTRL_2); - val |= MVNETA_GMAC2_INBAND_AN_ENABLE; - mvreg_write(pp, MVNETA_GMAC_CTRL_2, val); - } else { - val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); - val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE | - MVNETA_GMAC_AN_SPEED_EN | - MVNETA_GMAC_AN_DUPLEX_EN); - mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); - - val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER); - val &= ~MVNETA_GMAC_1MS_CLOCK_ENABLE; - mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val); - - val = mvreg_read(pp, MVNETA_GMAC_CTRL_2); - val &= ~MVNETA_GMAC2_INBAND_AN_ENABLE; - mvreg_write(pp, MVNETA_GMAC_CTRL_2, val); - } -} - static void mvneta_percpu_unmask_interrupt(void *arg) { struct mvneta_port *pp = arg; @@ -1463,7 +1444,6 @@ static void mvneta_defaults_set(struct mvneta_port *pp) val &= ~MVNETA_PHY_POLLING_ENABLE; mvreg_write(pp, MVNETA_UNIT_CONTROL, val); - mvneta_set_autoneg(pp, pp->use_inband_status); mvneta_set_ucast_table(pp, -1); mvneta_set_special_mcast_table(pp, -1); mvneta_set_other_mcast_table(pp, -1); @@ -2688,26 +2668,11 @@ static irqreturn_t mvneta_percpu_isr(int irq, void *dev_id) return IRQ_HANDLED; } -static int mvneta_fixed_link_update(struct mvneta_port *pp, - struct phy_device *phy) +static void mvneta_link_change(struct mvneta_port *pp) { - struct fixed_phy_status status; - struct fixed_phy_status changed = {}; u32 gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS); - status.link = !!(gmac_stat & MVNETA_GMAC_LINK_UP); - if (gmac_stat & MVNETA_GMAC_SPEED_1000) - status.speed = SPEED_1000; - else if (gmac_stat & MVNETA_GMAC_SPEED_100) - status.speed = SPEED_100; - else - status.speed = SPEED_10; - status.duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX); - changed.link = 1; - changed.speed = 1; - changed.duplex = 1; - fixed_phy_update_state(phy, &status, &changed); - return 0; + phylink_mac_change(pp->phylink, !!(gmac_stat & MVNETA_GMAC_LINK_UP)); } /* NAPI handler @@ -2723,7 +2688,6 @@ static int mvneta_poll(struct napi_struct *napi, int budget) u32 cause_rx_tx; int rx_queue; struct mvneta_port *pp = netdev_priv(napi->dev); - struct net_device *ndev = pp->dev; struct mvneta_pcpu_port *port = this_cpu_ptr(pp->ports); if (!netif_running(pp->dev)) { @@ -2737,12 +2701,11 @@ static int mvneta_poll(struct napi_struct *napi, int budget) u32 cause_misc = mvreg_read(pp, MVNETA_INTR_MISC_CAUSE); mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0); - if (pp->use_inband_status && (cause_misc & - (MVNETA_CAUSE_PHY_STATUS_CHANGE | - MVNETA_CAUSE_LINK_CHANGE | - MVNETA_CAUSE_PSC_SYNC_CHANGE))) { - mvneta_fixed_link_update(pp, ndev->phydev); - } + + if (cause_misc & (MVNETA_CAUSE_PHY_STATUS_CHANGE | + MVNETA_CAUSE_LINK_CHANGE | + MVNETA_CAUSE_PSC_SYNC_CHANGE)) + mvneta_link_change(pp); } /* Release Tx descriptors */ @@ -3056,7 +3019,6 @@ static int mvneta_setup_txqs(struct mvneta_port *pp) static void mvneta_start_dev(struct mvneta_port *pp) { int cpu; - struct net_device *ndev = pp->dev; mvneta_max_rx_size_set(pp, pp->pkt_size); mvneta_txq_max_tx_size_set(pp, pp->pkt_size); @@ -3084,16 +3046,15 @@ static void mvneta_start_dev(struct mvneta_port *pp) MVNETA_CAUSE_LINK_CHANGE | MVNETA_CAUSE_PSC_SYNC_CHANGE); - phy_start(ndev->phydev); + phylink_start(pp->phylink); netif_tx_start_all_queues(pp->dev); } static void mvneta_stop_dev(struct mvneta_port *pp) { unsigned int cpu; - struct net_device *ndev = pp->dev; - phy_stop(ndev->phydev); + phylink_stop(pp->phylink); if (!pp->neta_armada3700) { for_each_online_cpu(cpu) { @@ -3247,103 +3208,232 @@ static int mvneta_set_mac_addr(struct net_device *dev, void *addr) return 0; } -static void mvneta_adjust_link(struct net_device *ndev) +static void mvneta_validate(struct net_device *ndev, unsigned long *supported, + struct phylink_link_state *state) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + + /* Allow all the expected bits */ + phylink_set(mask, Autoneg); + phylink_set_port_modes(mask); + + /* Asymmetric pause is unsupported */ + phylink_set(mask, Pause); + /* Half-duplex at speeds higher than 100Mbit is unsupported */ + phylink_set(mask, 1000baseT_Full); + phylink_set(mask, 1000baseX_Full); + + if (state->interface != PHY_INTERFACE_MODE_1000BASEX) { + /* 10M and 100M are only supported in non-802.3z mode */ + phylink_set(mask, 10baseT_Half); + phylink_set(mask, 10baseT_Full); + phylink_set(mask, 100baseT_Half); + phylink_set(mask, 100baseT_Full); + } + + bitmap_and(supported, supported, mask, + __ETHTOOL_LINK_MODE_MASK_NBITS); + bitmap_and(state->advertising, state->advertising, mask, + __ETHTOOL_LINK_MODE_MASK_NBITS); +} + +static int mvneta_mac_link_state(struct net_device *ndev, + struct phylink_link_state *state) { struct mvneta_port *pp = netdev_priv(ndev); - struct phy_device *phydev = ndev->phydev; - int status_change = 0; + u32 gmac_stat; - if (phydev->link) { - if ((pp->speed != phydev->speed) || - (pp->duplex != phydev->duplex)) { - u32 val; + gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS); - val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); - val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED | - MVNETA_GMAC_CONFIG_GMII_SPEED | - MVNETA_GMAC_CONFIG_FULL_DUPLEX); + if (gmac_stat & MVNETA_GMAC_SPEED_1000) + state->speed = SPEED_1000; + else if (gmac_stat & MVNETA_GMAC_SPEED_100) + state->speed = SPEED_100; + else + state->speed = SPEED_10; - if (phydev->duplex) - val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX; + state->an_complete = !!(gmac_stat & MVNETA_GMAC_AN_COMPLETE); + state->link = !!(gmac_stat & MVNETA_GMAC_LINK_UP); + state->duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX); - if (phydev->speed == SPEED_1000) - val |= MVNETA_GMAC_CONFIG_GMII_SPEED; - else if (phydev->speed == SPEED_100) - val |= MVNETA_GMAC_CONFIG_MII_SPEED; + state->pause = 0; + if (gmac_stat & MVNETA_GMAC_RX_FLOW_CTRL_ENABLE) + state->pause |= MLO_PAUSE_RX; + if (gmac_stat & MVNETA_GMAC_TX_FLOW_CTRL_ENABLE) + state->pause |= MLO_PAUSE_TX; - mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); + return 1; +} - pp->duplex = phydev->duplex; - pp->speed = phydev->speed; - } - } +static void mvneta_mac_an_restart(struct net_device *ndev) +{ + struct mvneta_port *pp = netdev_priv(ndev); + u32 gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); - if (phydev->link != pp->link) { - if (!phydev->link) { - pp->duplex = -1; - pp->speed = 0; - } + mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, + gmac_an | MVNETA_GMAC_INBAND_RESTART_AN); + mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, + gmac_an & ~MVNETA_GMAC_INBAND_RESTART_AN); +} - pp->link = phydev->link; - status_change = 1; +static void mvneta_mac_config(struct net_device *ndev, unsigned int mode, + const struct phylink_link_state *state) +{ + struct mvneta_port *pp = netdev_priv(ndev); + u32 new_ctrl0, gmac_ctrl0 = mvreg_read(pp, MVNETA_GMAC_CTRL_0); + u32 new_ctrl2, gmac_ctrl2 = mvreg_read(pp, MVNETA_GMAC_CTRL_2); + u32 new_clk, gmac_clk = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER); + u32 new_an, gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); + + new_ctrl0 = gmac_ctrl0 & ~MVNETA_GMAC0_PORT_1000BASE_X; + new_ctrl2 = gmac_ctrl2 & ~MVNETA_GMAC2_INBAND_AN_ENABLE; + new_clk = gmac_clk & ~MVNETA_GMAC_1MS_CLOCK_ENABLE; + new_an = gmac_an & ~(MVNETA_GMAC_INBAND_AN_ENABLE | + MVNETA_GMAC_INBAND_RESTART_AN | + MVNETA_GMAC_CONFIG_MII_SPEED | + MVNETA_GMAC_CONFIG_GMII_SPEED | + MVNETA_GMAC_AN_SPEED_EN | + MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL | + MVNETA_GMAC_CONFIG_FLOW_CTRL | + MVNETA_GMAC_AN_FLOW_CTRL_EN | + MVNETA_GMAC_CONFIG_FULL_DUPLEX | + MVNETA_GMAC_AN_DUPLEX_EN); + + if (phylink_test(state->advertising, Pause)) + new_an |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL; + if (state->pause & MLO_PAUSE_TXRX_MASK) + new_an |= MVNETA_GMAC_CONFIG_FLOW_CTRL; + + if (!phylink_autoneg_inband(mode)) { + /* Phy or fixed speed */ + if (state->duplex) + new_an |= MVNETA_GMAC_CONFIG_FULL_DUPLEX; + + if (state->speed == SPEED_1000) + new_an |= MVNETA_GMAC_CONFIG_GMII_SPEED; + else if (state->speed == SPEED_100) + new_an |= MVNETA_GMAC_CONFIG_MII_SPEED; + } else if (state->interface == PHY_INTERFACE_MODE_SGMII) { + /* SGMII mode receives the state from the PHY */ + new_ctrl2 |= MVNETA_GMAC2_INBAND_AN_ENABLE; + new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE; + new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN | + MVNETA_GMAC_FORCE_LINK_PASS)) | + MVNETA_GMAC_INBAND_AN_ENABLE | + MVNETA_GMAC_AN_SPEED_EN | + MVNETA_GMAC_AN_DUPLEX_EN; + } else { + /* 802.3z negotiation - only 1000base-X */ + new_ctrl0 |= MVNETA_GMAC0_PORT_1000BASE_X; + new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE; + new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN | + MVNETA_GMAC_FORCE_LINK_PASS)) | + MVNETA_GMAC_INBAND_AN_ENABLE | + MVNETA_GMAC_CONFIG_GMII_SPEED | + /* The MAC only supports FD mode */ + MVNETA_GMAC_CONFIG_FULL_DUPLEX; + + if (state->pause & MLO_PAUSE_AN && state->an_enabled) + new_an |= MVNETA_GMAC_AN_FLOW_CTRL_EN; } - if (status_change) { - if (phydev->link) { - if (!pp->use_inband_status) { - u32 val = mvreg_read(pp, - MVNETA_GMAC_AUTONEG_CONFIG); - val &= ~MVNETA_GMAC_FORCE_LINK_DOWN; - val |= MVNETA_GMAC_FORCE_LINK_PASS; - mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, - val); - } - mvneta_port_up(pp); - } else { - if (!pp->use_inband_status) { - u32 val = mvreg_read(pp, - MVNETA_GMAC_AUTONEG_CONFIG); - val &= ~MVNETA_GMAC_FORCE_LINK_PASS; - val |= MVNETA_GMAC_FORCE_LINK_DOWN; - mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, - val); - } - mvneta_port_down(pp); - } - phy_print_status(phydev); + /* Armada 370 documentation says we can only change the port mode + * and in-band enable when the link is down, so force it down + * while making these changes. We also do this for GMAC_CTRL2 */ + if ((new_ctrl0 ^ gmac_ctrl0) & MVNETA_GMAC0_PORT_1000BASE_X || + (new_ctrl2 ^ gmac_ctrl2) & MVNETA_GMAC2_INBAND_AN_ENABLE || + (new_an ^ gmac_an) & MVNETA_GMAC_INBAND_AN_ENABLE) { + mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, + (gmac_an & ~MVNETA_GMAC_FORCE_LINK_PASS) | + MVNETA_GMAC_FORCE_LINK_DOWN); } + + if (new_ctrl0 != gmac_ctrl0) + mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0); + if (new_ctrl2 != gmac_ctrl2) + mvreg_write(pp, MVNETA_GMAC_CTRL_2, new_ctrl2); + if (new_clk != gmac_clk) + mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, new_clk); + if (new_an != gmac_an) + mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, new_an); } -static int mvneta_mdio_probe(struct mvneta_port *pp) +static void mvneta_set_eee(struct mvneta_port *pp, bool enable) { - struct phy_device *phy_dev; - struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL }; + u32 lpi_ctl1; + + lpi_ctl1 = mvreg_read(pp, MVNETA_LPI_CTRL_1); + if (enable) + lpi_ctl1 |= MVNETA_LPI_REQUEST_ENABLE; + else + lpi_ctl1 &= ~MVNETA_LPI_REQUEST_ENABLE; + mvreg_write(pp, MVNETA_LPI_CTRL_1, lpi_ctl1); +} + +static void mvneta_mac_link_down(struct net_device *ndev, unsigned int mode) +{ + struct mvneta_port *pp = netdev_priv(ndev); + u32 val; + + mvneta_port_down(pp); - phy_dev = of_phy_connect(pp->dev, pp->phy_node, mvneta_adjust_link, 0, - pp->phy_interface); - if (!phy_dev) { - netdev_err(pp->dev, "could not find the PHY\n"); - return -ENODEV; + if (!phylink_autoneg_inband(mode)) { + val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); + val &= ~MVNETA_GMAC_FORCE_LINK_PASS; + val |= MVNETA_GMAC_FORCE_LINK_DOWN; + mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); } - phy_ethtool_get_wol(phy_dev, &wol); - device_set_wakeup_capable(&pp->dev->dev, !!wol.supported); + pp->eee_active = false; + mvneta_set_eee(pp, false); +} - phy_dev->supported &= PHY_GBIT_FEATURES; - phy_dev->advertising = phy_dev->supported; +static void mvneta_mac_link_up(struct net_device *ndev, unsigned int mode, + struct phy_device *phy) +{ + struct mvneta_port *pp = netdev_priv(ndev); + u32 val; + + if (!phylink_autoneg_inband(mode)) { + val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); + val &= ~MVNETA_GMAC_FORCE_LINK_DOWN; + val |= MVNETA_GMAC_FORCE_LINK_PASS; + mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); + } - pp->link = 0; - pp->duplex = 0; - pp->speed = 0; + mvneta_port_up(pp); - return 0; + if (phy && pp->eee_enabled) { + pp->eee_active = phy_init_eee(phy, 0) >= 0; + mvneta_set_eee(pp, pp->eee_active && pp->tx_lpi_enabled); + } } -static void mvneta_mdio_remove(struct mvneta_port *pp) +static const struct phylink_mac_ops mvneta_phylink_ops = { + .validate = mvneta_validate, + .mac_link_state = mvneta_mac_link_state, + .mac_an_restart = mvneta_mac_an_restart, + .mac_config = mvneta_mac_config, + .mac_link_down = mvneta_mac_link_down, + .mac_link_up = mvneta_mac_link_up, +}; + +static int mvneta_mdio_probe(struct mvneta_port *pp) { - struct net_device *ndev = pp->dev; + struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL }; + int err = phylink_of_phy_connect(pp->phylink, pp->dn); + if (err) + netdev_err(pp->dev, "could not attach PHY\n"); - phy_disconnect(ndev->phydev); + phylink_ethtool_get_wol(pp->phylink, &wol); + device_set_wakeup_capable(&pp->dev->dev, !!wol.supported); + + return err; +} + +static void mvneta_mdio_remove(struct mvneta_port *pp) +{ + phylink_disconnect_phy(pp->phylink); } /* Electing a CPU must be done in an atomic way: it should be done @@ -3622,10 +3712,9 @@ static int mvneta_stop(struct net_device *dev) static int mvneta_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { - if (!dev->phydev) - return -ENOTSUPP; + struct mvneta_port *pp = netdev_priv(dev); - return phy_mii_ioctl(dev->phydev, ifr, cmd); + return phylink_mii_ioctl(pp->phylink, ifr, cmd); } /* Ethtool methods */ @@ -3636,44 +3725,25 @@ mvneta_ethtool_set_link_ksettings(struct net_device *ndev, const struct ethtool_link_ksettings *cmd) { struct mvneta_port *pp = netdev_priv(ndev); - struct phy_device *phydev = ndev->phydev; - - if (!phydev) - return -ENODEV; - - if ((cmd->base.autoneg == AUTONEG_ENABLE) != pp->use_inband_status) { - u32 val; - - mvneta_set_autoneg(pp, cmd->base.autoneg == AUTONEG_ENABLE); - if (cmd->base.autoneg == AUTONEG_DISABLE) { - val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); - val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED | - MVNETA_GMAC_CONFIG_GMII_SPEED | - MVNETA_GMAC_CONFIG_FULL_DUPLEX); - - if (phydev->duplex) - val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX; - - if (phydev->speed == SPEED_1000) - val |= MVNETA_GMAC_CONFIG_GMII_SPEED; - else if (phydev->speed == SPEED_100) - val |= MVNETA_GMAC_CONFIG_MII_SPEED; + return phylink_ethtool_ksettings_set(pp->phylink, cmd); +} - mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val); - } +/* Get link ksettings for ethtools */ +static int +mvneta_ethtool_get_link_ksettings(struct net_device *ndev, + struct ethtool_link_ksettings *cmd) +{ + struct mvneta_port *pp = netdev_priv(ndev); - pp->use_inband_status = (cmd->base.autoneg == AUTONEG_ENABLE); - netdev_info(pp->dev, "autoneg status set to %i\n", - pp->use_inband_status); + return phylink_ethtool_ksettings_get(pp->phylink, cmd); +} - if (netif_running(ndev)) { - mvneta_port_down(pp); - mvneta_port_up(pp); - } - } +static int mvneta_ethtool_nway_reset(struct net_device *dev) +{ + struct mvneta_port *pp = netdev_priv(dev); - return phy_ethtool_ksettings_set(ndev->phydev, cmd); + return phylink_ethtool_nway_reset(pp->phylink); } /* Set interrupt coalescing for ethtools */ @@ -3765,6 +3835,22 @@ static int mvneta_ethtool_set_ringparam(struct net_device *dev, return 0; } +static void mvneta_ethtool_get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pause) +{ + struct mvneta_port *pp = netdev_priv(dev); + + phylink_ethtool_get_pauseparam(pp->phylink, pause); +} + +static int mvneta_ethtool_set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pause) +{ + struct mvneta_port *pp = netdev_priv(dev); + + return phylink_ethtool_set_pauseparam(pp->phylink, pause); +} + static void mvneta_ethtool_get_strings(struct net_device *netdev, u32 sset, u8 *data) { @@ -3781,26 +3867,35 @@ static void mvneta_ethtool_update_stats(struct mvneta_port *pp) { const struct mvneta_statistic *s; void __iomem *base = pp->base; - u32 high, low, val; - u64 val64; + u32 high, low; + u64 val; int i; for (i = 0, s = mvneta_statistics; s < mvneta_statistics + ARRAY_SIZE(mvneta_statistics); s++, i++) { + val = 0; + switch (s->type) { case T_REG_32: val = readl_relaxed(base + s->offset); - pp->ethtool_stats[i] += val; break; case T_REG_64: /* Docs say to read low 32-bit then high */ low = readl_relaxed(base + s->offset); high = readl_relaxed(base + s->offset + 4); - val64 = (u64)high << 32 | low; - pp->ethtool_stats[i] += val64; + val = (u64)high << 32 | low; + break; + case T_SW: + switch (s->offset) { + case ETHTOOL_STAT_EEE_WAKEUP: + val = phylink_get_eee_err(pp->phylink); + break; + } break; } + + pp->ethtool_stats[i] += val; } } @@ -3935,28 +4030,65 @@ static int mvneta_ethtool_get_rxfh(struct net_device *dev, u32 *indir, u8 *key, static void mvneta_ethtool_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { - wol->supported = 0; - wol->wolopts = 0; + struct mvneta_port *pp = netdev_priv(dev); - if (dev->phydev) - phy_ethtool_get_wol(dev->phydev, wol); + phylink_ethtool_get_wol(pp->phylink, wol); } static int mvneta_ethtool_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { + struct mvneta_port *pp = netdev_priv(dev); int ret; - if (!dev->phydev) - return -EOPNOTSUPP; - - ret = phy_ethtool_set_wol(dev->phydev, wol); + ret = phylink_ethtool_set_wol(pp->phylink, wol); if (!ret) device_set_wakeup_enable(&dev->dev, !!wol->wolopts); return ret; } +static int mvneta_ethtool_get_eee(struct net_device *dev, + struct ethtool_eee *eee) +{ + struct mvneta_port *pp = netdev_priv(dev); + u32 lpi_ctl0; + + lpi_ctl0 = mvreg_read(pp, MVNETA_LPI_CTRL_0); + + eee->eee_enabled = pp->eee_enabled; + eee->eee_active = pp->eee_active; + eee->tx_lpi_enabled = pp->tx_lpi_enabled; + eee->tx_lpi_timer = (lpi_ctl0) >> 8; // * scale; + + return phylink_ethtool_get_eee(pp->phylink, eee); +} + +static int mvneta_ethtool_set_eee(struct net_device *dev, + struct ethtool_eee *eee) +{ + struct mvneta_port *pp = netdev_priv(dev); + u32 lpi_ctl0; + + /* The Armada 37x documents do not give limits for this other than + * it being an 8-bit register. */ + if (eee->tx_lpi_enabled && + (eee->tx_lpi_timer < 0 || eee->tx_lpi_timer > 255)) + return -EINVAL; + + lpi_ctl0 = mvreg_read(pp, MVNETA_LPI_CTRL_0); + lpi_ctl0 &= ~(0xff << 8); + lpi_ctl0 |= eee->tx_lpi_timer << 8; + mvreg_write(pp, MVNETA_LPI_CTRL_0, lpi_ctl0); + + pp->eee_enabled = eee->eee_enabled; + pp->tx_lpi_enabled = eee->tx_lpi_enabled; + + mvneta_set_eee(pp, eee->tx_lpi_enabled && eee->eee_enabled); + + return phylink_ethtool_set_eee(pp->phylink, eee); +} + static const struct net_device_ops mvneta_netdev_ops = { .ndo_open = mvneta_open, .ndo_stop = mvneta_stop, @@ -3970,13 +4102,15 @@ static const struct net_device_ops mvneta_netdev_ops = { }; static const struct ethtool_ops mvneta_eth_tool_ops = { - .nway_reset = phy_ethtool_nway_reset, + .nway_reset = mvneta_ethtool_nway_reset, .get_link = ethtool_op_get_link, .set_coalesce = mvneta_ethtool_set_coalesce, .get_coalesce = mvneta_ethtool_get_coalesce, .get_drvinfo = mvneta_ethtool_get_drvinfo, .get_ringparam = mvneta_ethtool_get_ringparam, .set_ringparam = mvneta_ethtool_set_ringparam, + .get_pauseparam = mvneta_ethtool_get_pauseparam, + .set_pauseparam = mvneta_ethtool_set_pauseparam, .get_strings = mvneta_ethtool_get_strings, .get_ethtool_stats = mvneta_ethtool_get_stats, .get_sset_count = mvneta_ethtool_get_sset_count, @@ -3984,10 +4118,12 @@ static const struct ethtool_ops mvneta_eth_tool_ops = { .get_rxnfc = mvneta_ethtool_get_rxnfc, .get_rxfh = mvneta_ethtool_get_rxfh, .set_rxfh = mvneta_ethtool_set_rxfh, - .get_link_ksettings = phy_ethtool_get_link_ksettings, + .get_link_ksettings = mvneta_ethtool_get_link_ksettings, .set_link_ksettings = mvneta_ethtool_set_link_ksettings, .get_wol = mvneta_ethtool_get_wol, .set_wol = mvneta_ethtool_set_wol, + .get_eee = mvneta_ethtool_get_eee, + .set_eee = mvneta_ethtool_set_eee, }; /* Initialize hw */ @@ -4132,14 +4268,13 @@ static int mvneta_probe(struct platform_device *pdev) { struct resource *res; struct device_node *dn = pdev->dev.of_node; - struct device_node *phy_node; struct device_node *bm_node; struct mvneta_port *pp; struct net_device *dev; + struct phylink *phylink; const char *dt_mac_addr; char hw_mac_addr[ETH_ALEN]; const char *mac_from; - const char *managed; int tx_csum_limit; int phy_mode; int err; @@ -4155,31 +4290,11 @@ static int mvneta_probe(struct platform_device *pdev) goto err_free_netdev; } - phy_node = of_parse_phandle(dn, "phy", 0); - if (!phy_node) { - if (!of_phy_is_fixed_link(dn)) { - dev_err(&pdev->dev, "no PHY specified\n"); - err = -ENODEV; - goto err_free_irq; - } - - err = of_phy_register_fixed_link(dn); - if (err < 0) { - dev_err(&pdev->dev, "cannot register fixed PHY\n"); - goto err_free_irq; - } - - /* In the case of a fixed PHY, the DT node associated - * to the PHY is the Ethernet MAC DT node. - */ - phy_node = of_node_get(dn); - } - phy_mode = of_get_phy_mode(dn); if (phy_mode < 0) { dev_err(&pdev->dev, "incorrect phy-mode\n"); err = -EINVAL; - goto err_put_phy_node; + goto err_free_irq; } dev->tx_queue_len = MVNETA_MAX_TXD; @@ -4190,12 +4305,7 @@ static int mvneta_probe(struct platform_device *pdev) pp = netdev_priv(dev); spin_lock_init(&pp->lock); - pp->phy_node = phy_node; - pp->phy_interface = phy_mode; - - err = of_property_read_string(dn, "managed", &managed); - pp->use_inband_status = (err == 0 && - strcmp(managed, "in-band-status") == 0); + pp->dn = dn; pp->rxq_def = rxq_def; @@ -4217,7 +4327,7 @@ static int mvneta_probe(struct platform_device *pdev) pp->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(pp->clk)) { err = PTR_ERR(pp->clk); - goto err_put_phy_node; + goto err_free_irq; } clk_prepare_enable(pp->clk); @@ -4343,6 +4453,14 @@ static int mvneta_probe(struct platform_device *pdev) /* 9676 == 9700 - 20 and rounding to 8 */ dev->max_mtu = 9676; + phylink = phylink_create(dev, dn, phy_mode, &mvneta_phylink_ops); + if (IS_ERR(phylink)) { + err = PTR_ERR(phylink); + goto err_free_stats; + } + + pp->phylink = phylink; + err = register_netdev(dev); if (err < 0) { dev_err(&pdev->dev, "failed to register\n"); @@ -4354,14 +4472,6 @@ static int mvneta_probe(struct platform_device *pdev) platform_set_drvdata(pdev, pp->dev); - if (pp->use_inband_status) { - struct phy_device *phy = of_phy_find_device(dn); - - mvneta_fixed_link_update(pp, phy); - - put_device(&phy->mdio.dev); - } - return 0; err_netdev: @@ -4372,16 +4482,14 @@ err_netdev: 1 << pp->id); } err_free_stats: + if (pp->phylink) + phylink_destroy(pp->phylink); free_percpu(pp->stats); err_free_ports: free_percpu(pp->ports); err_clk: clk_disable_unprepare(pp->clk_bus); clk_disable_unprepare(pp->clk); -err_put_phy_node: - of_node_put(phy_node); - if (of_phy_is_fixed_link(dn)) - of_phy_deregister_fixed_link(dn); err_free_irq: irq_dispose_mapping(dev->irq); err_free_netdev: @@ -4393,7 +4501,6 @@ err_free_netdev: static int mvneta_remove(struct platform_device *pdev) { struct net_device *dev = platform_get_drvdata(pdev); - struct device_node *dn = pdev->dev.of_node; struct mvneta_port *pp = netdev_priv(dev); unregister_netdev(dev); @@ -4401,10 +4508,8 @@ static int mvneta_remove(struct platform_device *pdev) clk_disable_unprepare(pp->clk); free_percpu(pp->ports); free_percpu(pp->stats); - if (of_phy_is_fixed_link(dn)) - of_phy_deregister_fixed_link(dn); irq_dispose_mapping(dev->irq); - of_node_put(pp->phy_node); + phylink_destroy(pp->phylink); free_netdev(dev); if (pp->bm_priv) { @@ -4456,9 +4561,6 @@ static int mvneta_resume(struct device *device) return err; } - if (pp->use_inband_status) - mvneta_fixed_link_update(pp, dev->phydev); - netif_device_attach(dev); if (netif_running(dev)) { mvneta_open(dev); -- cgit From 8e49f7e64eea15f48d6576bbd7c7819c9c1b27fd Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 16 May 2017 11:55:58 +0100 Subject: net: mvneta: hack fix phy_interface Signed-off-by: Russell King --- drivers/net/ethernet/marvell/mvneta.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 487dc0804e1a..6dee62c445a3 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -430,6 +430,7 @@ struct mvneta_port { u16 tx_ring_size; u16 rx_ring_size; + phy_interface_t phy_interface; struct device_node *dn; unsigned int tx_csum_limit; struct phylink *phylink; @@ -4305,6 +4306,7 @@ static int mvneta_probe(struct platform_device *pdev) pp = netdev_priv(dev); spin_lock_init(&pp->lock); + pp->phy_interface = phy_mode; pp->dn = dn; pp->rxq_def = rxq_def; -- cgit From 3525b18629a45ef4b85ddb2527644a057698b23b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 24 Dec 2016 10:27:08 +0000 Subject: net: mvneta: disable MVNETA_CAUSE_PSC_SYNC_CHANGE interrupt The PSC sync change interrupt can fire multiple times while the link is down. As this isn't information we make use of, it's pointless having the interrupt enabled, so let's disable this interrupt. Signed-off-by: Russell King --- drivers/net/ethernet/marvell/mvneta.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 6dee62c445a3..e31fe97d4b2b 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -2704,8 +2704,7 @@ static int mvneta_poll(struct napi_struct *napi, int budget) mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0); if (cause_misc & (MVNETA_CAUSE_PHY_STATUS_CHANGE | - MVNETA_CAUSE_LINK_CHANGE | - MVNETA_CAUSE_PSC_SYNC_CHANGE)) + MVNETA_CAUSE_LINK_CHANGE)) mvneta_link_change(pp); } @@ -3044,8 +3043,7 @@ static void mvneta_start_dev(struct mvneta_port *pp) mvreg_write(pp, MVNETA_INTR_MISC_MASK, MVNETA_CAUSE_PHY_STATUS_CHANGE | - MVNETA_CAUSE_LINK_CHANGE | - MVNETA_CAUSE_PSC_SYNC_CHANGE); + MVNETA_CAUSE_LINK_CHANGE); phylink_start(pp->phylink); netif_tx_start_all_queues(pp->dev); @@ -3542,8 +3540,7 @@ static int mvneta_cpu_online(unsigned int cpu, struct hlist_node *node) on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true); mvreg_write(pp, MVNETA_INTR_MISC_MASK, MVNETA_CAUSE_PHY_STATUS_CHANGE | - MVNETA_CAUSE_LINK_CHANGE | - MVNETA_CAUSE_PSC_SYNC_CHANGE); + MVNETA_CAUSE_LINK_CHANGE); netif_tx_start_all_queues(pp->dev); spin_unlock(&pp->lock); return 0; @@ -3584,8 +3581,7 @@ static int mvneta_cpu_dead(unsigned int cpu, struct hlist_node *node) on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true); mvreg_write(pp, MVNETA_INTR_MISC_MASK, MVNETA_CAUSE_PHY_STATUS_CHANGE | - MVNETA_CAUSE_LINK_CHANGE | - MVNETA_CAUSE_PSC_SYNC_CHANGE); + MVNETA_CAUSE_LINK_CHANGE); netif_tx_start_all_queues(pp->dev); return 0; } -- cgit From 12068dbcb65027d8d9ad7cb98c759571f9a89edf Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 1 Oct 2015 23:32:39 +0100 Subject: net: mvneta: add module EEPROM reading support Signed-off-by: Russell King --- drivers/net/ethernet/marvell/mvneta.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index e31fe97d4b2b..22f96d57974e 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -4045,6 +4045,22 @@ static int mvneta_ethtool_set_wol(struct net_device *dev, return ret; } +static int mvneta_ethtool_get_module_info(struct net_device *dev, + struct ethtool_modinfo *modinfo) +{ + struct mvneta_port *pp = netdev_priv(dev); + + return phylink_ethtool_get_module_info(pp->phylink, modinfo); +} + +static int mvneta_ethtool_get_module_eeprom(struct net_device *dev, + struct ethtool_eeprom *ee, u8 *buf) +{ + struct mvneta_port *pp = netdev_priv(dev); + + return phylink_ethtool_get_module_eeprom(pp->phylink, ee, buf); +} + static int mvneta_ethtool_get_eee(struct net_device *dev, struct ethtool_eee *eee) { @@ -4119,6 +4135,8 @@ static const struct ethtool_ops mvneta_eth_tool_ops = { .set_link_ksettings = mvneta_ethtool_set_link_ksettings, .get_wol = mvneta_ethtool_get_wol, .set_wol = mvneta_ethtool_set_wol, + .get_module_info = mvneta_ethtool_get_module_info, + .get_module_eeprom = mvneta_ethtool_get_module_eeprom, .get_eee = mvneta_ethtool_get_eee, .set_eee = mvneta_ethtool_set_eee, }; -- cgit From 901100fb2e4cd474ed54a04efd0e07b72b3748c8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 2 Oct 2015 22:46:54 +0100 Subject: phy: fixed-phy: remove fixed_phy_update_state() mvneta is the only user of fixed_phy_update_state(), which has been converted to use phylink instead. Remove fixed_phy_update_state(). Reviewed-by: Florian Fainelli Signed-off-by: Russell King --- drivers/net/phy/fixed_phy.c | 31 ------------------------------- include/linux/phy_fixed.h | 9 --------- 2 files changed, 40 deletions(-) diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c index eb5167210681..001fe1df7557 100644 --- a/drivers/net/phy/fixed_phy.c +++ b/drivers/net/phy/fixed_phy.c @@ -115,37 +115,6 @@ int fixed_phy_set_link_update(struct phy_device *phydev, } EXPORT_SYMBOL_GPL(fixed_phy_set_link_update); -int fixed_phy_update_state(struct phy_device *phydev, - const struct fixed_phy_status *status, - const struct fixed_phy_status *changed) -{ - struct fixed_mdio_bus *fmb = &platform_fmb; - struct fixed_phy *fp; - - if (!phydev || phydev->mdio.bus != fmb->mii_bus) - return -EINVAL; - - list_for_each_entry(fp, &fmb->phys, node) { - if (fp->addr == phydev->mdio.addr) { - write_seqcount_begin(&fp->seqcount); -#define _UPD(x) if (changed->x) \ - fp->status.x = status->x - _UPD(link); - _UPD(speed); - _UPD(duplex); - _UPD(pause); - _UPD(asym_pause); -#undef _UPD - fixed_phy_update(fp); - write_seqcount_end(&fp->seqcount); - return 0; - } - } - - return -ENOENT; -} -EXPORT_SYMBOL(fixed_phy_update_state); - int fixed_phy_add(unsigned int irq, int phy_addr, struct fixed_phy_status *status, int link_gpio) diff --git a/include/linux/phy_fixed.h b/include/linux/phy_fixed.h index 1d41ec44e39d..43a83fa75040 100644 --- a/include/linux/phy_fixed.h +++ b/include/linux/phy_fixed.h @@ -23,9 +23,6 @@ extern void fixed_phy_unregister(struct phy_device *phydev); extern int fixed_phy_set_link_update(struct phy_device *phydev, int (*link_update)(struct net_device *, struct fixed_phy_status *)); -extern int fixed_phy_update_state(struct phy_device *phydev, - const struct fixed_phy_status *status, - const struct fixed_phy_status *changed); #else static inline int fixed_phy_add(unsigned int irq, int phy_id, struct fixed_phy_status *status, @@ -49,12 +46,6 @@ static inline int fixed_phy_set_link_update(struct phy_device *phydev, { return -ENODEV; } -static inline int fixed_phy_update_state(struct phy_device *phydev, - const struct fixed_phy_status *status, - const struct fixed_phy_status *changed) -{ - return -ENODEV; -} #endif /* CONFIG_FIXED_PHY */ #endif /* __PHY_FIXED_H */ -- cgit From 48c5b7d79cbecadaec340dcd6cfc0746de9edba0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 14 Apr 2017 15:26:32 +0100 Subject: sfp: move module eeprom ethtool access into netdev core ethtool Signed-off-by: Russell King --- drivers/net/ethernet/marvell/mvneta.c | 18 ------------------ drivers/net/phy/phylink.c | 28 ---------------------------- drivers/net/phy/sfp-bus.c | 6 ++---- include/linux/netdevice.h | 2 ++ include/linux/phylink.h | 3 --- net/core/ethtool.c | 7 +++++++ 6 files changed, 11 insertions(+), 53 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c index 22f96d57974e..e31fe97d4b2b 100644 --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -4045,22 +4045,6 @@ static int mvneta_ethtool_set_wol(struct net_device *dev, return ret; } -static int mvneta_ethtool_get_module_info(struct net_device *dev, - struct ethtool_modinfo *modinfo) -{ - struct mvneta_port *pp = netdev_priv(dev); - - return phylink_ethtool_get_module_info(pp->phylink, modinfo); -} - -static int mvneta_ethtool_get_module_eeprom(struct net_device *dev, - struct ethtool_eeprom *ee, u8 *buf) -{ - struct mvneta_port *pp = netdev_priv(dev); - - return phylink_ethtool_get_module_eeprom(pp->phylink, ee, buf); -} - static int mvneta_ethtool_get_eee(struct net_device *dev, struct ethtool_eee *eee) { @@ -4135,8 +4119,6 @@ static const struct ethtool_ops mvneta_eth_tool_ops = { .set_link_ksettings = mvneta_ethtool_set_link_ksettings, .get_wol = mvneta_ethtool_get_wol, .set_wol = mvneta_ethtool_set_wol, - .get_module_info = mvneta_ethtool_get_module_info, - .get_module_eeprom = mvneta_ethtool_get_module_eeprom, .get_eee = mvneta_ethtool_get_eee, .set_eee = mvneta_ethtool_set_eee, }; diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 32917bdd1432..cb4df997fb37 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -1037,34 +1037,6 @@ int phylink_ethtool_set_pauseparam(struct phylink *pl, } EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam); -int phylink_ethtool_get_module_info(struct phylink *pl, - struct ethtool_modinfo *modinfo) -{ - int ret = -EOPNOTSUPP; - - WARN_ON(!lockdep_rtnl_is_held()); - - if (pl->sfp_bus) - ret = sfp_get_module_info(pl->sfp_bus, modinfo); - - return ret; -} -EXPORT_SYMBOL_GPL(phylink_ethtool_get_module_info); - -int phylink_ethtool_get_module_eeprom(struct phylink *pl, - struct ethtool_eeprom *ee, u8 *buf) -{ - int ret = -EOPNOTSUPP; - - WARN_ON(!lockdep_rtnl_is_held()); - - if (pl->sfp_bus) - ret = sfp_get_module_eeprom(pl->sfp_bus, ee, buf); - - return ret; -} -EXPORT_SYMBOL_GPL(phylink_ethtool_get_module_eeprom); - int phylink_init_eee(struct phylink *pl, bool clk_stop_enable) { int ret = -EPROTONOSUPPORT; diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index 5cb5384697ea..8d42a8b0ccdd 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -278,6 +278,7 @@ static int sfp_register_bus(struct sfp_bus *bus) } if (bus->started) bus->socket_ops->start(bus->sfp); + bus->netdev->sfp_bus = bus; bus->registered = true; return 0; } @@ -292,14 +293,13 @@ static void sfp_unregister_bus(struct sfp_bus *bus) if (bus->phydev && ops && ops->disconnect_phy) ops->disconnect_phy(bus->upstream); } + bus->netdev->sfp_bus = NULL; bus->registered = false; } int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo) { - if (!bus->registered) - return -ENOIOCTLCMD; return bus->socket_ops->module_info(bus->sfp, modinfo); } EXPORT_SYMBOL_GPL(sfp_get_module_info); @@ -307,8 +307,6 @@ EXPORT_SYMBOL_GPL(sfp_get_module_info); int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee, u8 *data) { - if (!bus->registered) - return -ENOIOCTLCMD; return bus->socket_ops->module_eeprom(bus->sfp, ee, data); } EXPORT_SYMBOL_GPL(sfp_get_module_eeprom); diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index c99ba7914c0a..24409cc74a3f 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -58,6 +58,7 @@ struct device; struct phy_device; struct dsa_switch_tree; +struct sfp_bus; /* 802.11 specific */ struct wireless_dev; /* 802.15.4 specific */ @@ -1906,6 +1907,7 @@ struct net_device { struct netprio_map __rcu *priomap; #endif struct phy_device *phydev; + struct sfp_bus *sfp_bus; struct lock_class_key *qdisc_tx_busylock; struct lock_class_key *qdisc_running_key; bool proto_down; diff --git a/include/linux/phylink.h b/include/linux/phylink.h index af67edd4ae38..76f054f39684 100644 --- a/include/linux/phylink.h +++ b/include/linux/phylink.h @@ -125,9 +125,6 @@ void phylink_ethtool_get_pauseparam(struct phylink *, struct ethtool_pauseparam *); int phylink_ethtool_set_pauseparam(struct phylink *, struct ethtool_pauseparam *); -int phylink_ethtool_get_module_info(struct phylink *, struct ethtool_modinfo *); -int phylink_ethtool_get_module_eeprom(struct phylink *, - struct ethtool_eeprom *, u8 *); int phylink_init_eee(struct phylink *, bool); int phylink_get_eee_err(struct phylink *); int phylink_ethtool_get_eee(struct phylink *, struct ethtool_eee *); diff --git a/net/core/ethtool.c b/net/core/ethtool.c index 674b6c9cec18..c02b83224542 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -2203,6 +2204,9 @@ static int __ethtool_get_module_info(struct net_device *dev, const struct ethtool_ops *ops = dev->ethtool_ops; struct phy_device *phydev = dev->phydev; + if (dev->sfp_bus) + return sfp_get_module_info(dev->sfp_bus, modinfo); + if (phydev && phydev->drv && phydev->drv->module_info) return phydev->drv->module_info(phydev, modinfo); @@ -2237,6 +2241,9 @@ static int __ethtool_get_module_eeprom(struct net_device *dev, const struct ethtool_ops *ops = dev->ethtool_ops; struct phy_device *phydev = dev->phydev; + if (dev->sfp_bus) + return sfp_get_module_eeprom(dev->sfp_bus, ee, data); + if (phydev && phydev->drv && phydev->drv->module_eeprom) return phydev->drv->module_eeprom(phydev, ee, data); -- cgit From 6d091cc8f6bde67836470bd86136e6c8ff007087 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 14 Apr 2017 16:41:55 +0100 Subject: sfp: use netdev sfp_bus for start/stop Signed-off-by: Russell King --- drivers/net/phy/phylink.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index cb4df997fb37..ee5772f28ddf 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -754,8 +754,8 @@ void phylink_start(struct phylink *pl) clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); phylink_run_resolve(pl); - if (pl->sfp_bus) - sfp_upstream_start(pl->sfp_bus); + if (pl->netdev->sfp_bus) + sfp_upstream_start(pl->netdev->sfp_bus); if (pl->phydev) phy_start(pl->phydev); } @@ -767,8 +767,8 @@ void phylink_stop(struct phylink *pl) if (pl->phydev) phy_stop(pl->phydev); - if (pl->sfp_bus) - sfp_upstream_stop(pl->sfp_bus); + if (pl->netdev->sfp_bus) + sfp_upstream_stop(pl->netdev->sfp_bus); set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); flush_work(&pl->resolve); -- cgit From 1143c2c4bcc0e0c7df9ebfa33444050ba28d616e Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 14 Apr 2017 14:21:25 +0100 Subject: sfp: hack: allow marvell 10G phy support to use SFP Allow the Marvell 10G PHY to register with the SFP bus, so that SFP+ cages can work. This bypasses phylink, meaning that socket status is not taken into account for the link state. Also, the tx-disable signal must be commented out in DT for this to work... Signed-off-by: Russell King --- drivers/net/phy/marvell10g.c | 54 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index aebc08beceba..e3e743ab0bb4 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -15,7 +15,9 @@ * If both the fiber and copper ports are connected, the first to gain * link takes priority and the other port is completely locked out. */ +#include #include +#include enum { MV_PCS_BASE_T = 0x0000, @@ -37,6 +39,11 @@ enum { MV_AN_RESULT_SPD_10000 = BIT(15), }; +struct mv3310_priv { + struct device_node *sfp_node; + struct sfp_bus *sfp_bus; +}; + static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg, u16 mask, u16 bits) { @@ -55,17 +62,52 @@ static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg, return ret < 0 ? ret : 1; } +static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) +{ + struct phy_device *phydev = upstream; + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); + + if (sfp_parse_interface(priv->sfp_bus, id) != PHY_INTERFACE_MODE_10GKR) { + dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); + return -EINVAL; + } + return 0; +} + +static const struct sfp_upstream_ops mv3310_sfp_ops = { + .module_insert = mv3310_sfp_insert, +}; + static int mv3310_probe(struct phy_device *phydev) { + struct mv3310_priv *priv; u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN; if (!phydev->is_c45 || (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask) return -ENODEV; + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + dev_set_drvdata(&phydev->mdio.dev, priv); + + if (phydev->mdio.dev.of_node) + priv->sfp_node = of_parse_phandle(phydev->mdio.dev.of_node, + "sfp", 0); + return 0; } +static void mv3310_remove(struct phy_device *phydev) +{ + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); + + if (priv->sfp_bus) + sfp_unregister_upstream(priv->sfp_bus); +} + /* * Resetting the MV88X3310 causes it to become non-responsive. Avoid * setting the reset bit(s). @@ -77,6 +119,7 @@ static int mv3310_soft_reset(struct phy_device *phydev) static int mv3310_config_init(struct phy_device *phydev) { + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, }; u32 mask; int val; @@ -165,6 +208,14 @@ static int mv3310_config_init(struct phy_device *phydev) phydev->supported &= mask; phydev->advertising &= phydev->supported; + /* Would be nice to do this in the probe function, but unfortunately, + * phylib doesn't have phydev->attached_dev set there. + */ + if (priv->sfp_node && !priv->sfp_bus) + priv->sfp_bus = sfp_register_upstream(priv->sfp_node, + phydev->attached_dev, + phydev, &mv3310_sfp_ops); + return 0; } @@ -348,12 +399,13 @@ static struct phy_driver mv3310_drivers[] = { SUPPORTED_FIBRE | SUPPORTED_10000baseT_Full | SUPPORTED_Backplane, - .probe = mv3310_probe, .soft_reset = mv3310_soft_reset, .config_init = mv3310_config_init, + .probe = mv3310_probe, .config_aneg = mv3310_config_aneg, .aneg_done = mv3310_aneg_done, .read_status = mv3310_read_status, + .remove = mv3310_remove, }, }; -- cgit From c6390ebea30077d0a20d951ff6a97553dca10318 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 14 Apr 2017 20:17:13 +0100 Subject: sfp: add sfp+ compatible Add a compatible for SFP+ cages. SFP+ cages are backwards compatible, but the ethernet device behind them may not support the slower speeds of SFP modules. Signed-off-by: Russell King --- drivers/net/phy/sfp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 310426774ff8..08b4a5494912 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -1135,6 +1135,7 @@ static int sfp_remove(struct platform_device *pdev) static const struct of_device_id sfp_of_match[] = { { .compatible = "sff,sfp", }, + { .compatible = "sff,sfp+", }, { }, }; MODULE_DEVICE_TABLE(of, sfp_of_match); -- cgit