From 26a940e21752e0de8f068f77dad606a7d1986937 Mon Sep 17 00:00:00 2001 From: Pete Popov Date: Thu, 15 Sep 2005 08:03:12 +0000 Subject: Cleaned up AMD Au1200 IDE driver: - converted to platform bus - removed pci dependencies - removed virt_to_phys/phys_to_virt calls System now can root off of a disk. Signed-off-by: Ralf Baechle diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README new file mode 100644 --- Documentation/mips/AU1xxx_IDE.README | 168 ++++ arch/mips/Kconfig | 2 +- arch/mips/au1000/common/dbdma.c | 6 + arch/mips/au1000/common/platform.c | 32 +- arch/mips/au1000/pb1200/irqmap.c | 6 +- drivers/ide/Kconfig | 31 +- drivers/ide/ide-proc.c | 1 + drivers/ide/mips/au1xxx-ide.c | 1250 +++++++++++++++++++++++++++ include/asm-mips/mach-au1x00/au1xxx.h | 44 + include/asm-mips/mach-au1x00/au1xxx_dbdma.h | 4 + include/asm-mips/mach-au1x00/au1xxx_ide.h | 301 +++++++ include/linux/ide.h | 2 +- 12 files changed, 1840 insertions(+), 7 deletions(-) create mode 100644 Documentation/mips/AU1xxx_IDE.README create mode 100644 drivers/ide/mips/au1xxx-ide.c create mode 100644 include/asm-mips/mach-au1x00/au1xxx.h create mode 100644 include/asm-mips/mach-au1x00/au1xxx_ide.h diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README new file mode 100644 index 000000000000..a7e4c4ea3560 --- /dev/null +++ b/Documentation/mips/AU1xxx_IDE.README @@ -0,0 +1,168 @@ +README for MIPS AU1XXX IDE driver - Released 2005-07-15 + +ABOUT +----- +This file describes the 'drivers/ide/mips/au1xxx-ide.c', related files and the +services they provide. + +If you are short in patience and just want to know how to add your hard disc to +the white or black list, go to the 'ADD NEW HARD DISC TO WHITE OR BLACK LIST' +section. + + +LICENSE +------- + +Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions + +This program is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free Software +Foundation; either version 2 of the License, or (at your option) any later +version. + +THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR +BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +You should have received a copy of the GNU General Public License along with +this program; if not, write to the Free Software Foundation, Inc., +675 Mass Ave, Cambridge, MA 02139, USA. + +Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE + Interface and Linux Device Driver" Application Note. + + +FILES, CONFIGS AND COMPATABILITY +-------------------------------- + +Two files are introduced: + + a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h' + containes : struct _auide_hwif + struct drive_list_entry dma_white_list + struct drive_list_entry dma_black_list + timing parameters for PIO mode 0/1/2/3/4 + timing parameters for MWDMA 0/1/2 + + b) 'drivers/ide/mips/au1xxx-ide.c' + contains the functionality of the AU1XXX IDE driver + +Four configs variables are introduced: + + CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA - enable the PIO+DBDMA mode + CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - enable the MWDMA mode + CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA + controler + CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size + per descriptor + +If MWDMA is enabled and the connected hard disc is not on the white list, the +kernel switches to a "safe mwdma mode" at boot time. In this mode the IDE +performance is substantial slower then in full speed mwdma. In this case +please add your hard disc to the white list (follow instruction from 'ADD NEW +HARD DISC TO WHITE OR BLACK LIST' section). + + +SUPPORTED IDE MODES +------------------- + +The AU1XXX IDE driver supported all PIO modes - PIO mode 0/1/2/3/4 - and all +MWDMA modes - MWDMA 0/1/2 -. There is no support for SWDMA and UDMA mode. + +To change the PIO mode use the program hdparm with option -p, e.g. +'hdparm -p0 [device]' for PIO mode 0. To enable the MWDMA mode use the option +-X, e.g. 'hdparm -X32 [device]' for MWDMA mode 0. + + +PERFORMANCE CONFIGURATIONS +-------------------------- + +If the used system doesn't need USB support enable the following kernel configs: + +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +CONFIG_IDEDMA_PCI_AUTO=y +CONFIG_BLK_DEV_IDE_AU1XXX=y +CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y +CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON=y +CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128 +CONFIG_BLK_DEV_IDEDMA=y +CONFIG_IDEDMA_AUTO=y + +If the used system need the USB support enable the following kernel configs for +high IDE to USB throughput. + +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +CONFIG_IDEDMA_PCI_AUTO=y +CONFIG_BLK_DEV_IDE_AU1XXX=y +CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y +CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128 +CONFIG_BLK_DEV_IDEDMA=y +CONFIG_IDEDMA_AUTO=y + + +ADD NEW HARD DISC TO WHITE OR BLACK LIST +---------------------------------------- + +Step 1 : detect the model name of your hard disc + + a) connect your hard disc to the AU1XXX + + b) boot your kernel and get the hard disc model. + + Example boot log: + + --snipped-- + Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 + ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx + Au1xxx IDE(builtin) configured for MWDMA2 + Probing IDE interface ide0... + hda: Maxtor 6E040L0, ATA DISK drive + ide0 at 0xac800000-0xac800007,0xac8001c0 on irq 64 + hda: max request size: 64KiB + hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, (U)DMA + --snipped-- + + In this example 'Maxtor 6E040L0'. + +Step 2 : edit 'include/asm-mips/mach-au1x00/au1xxx_ide.h' + + Add your hard disc to the dma_white_list or dma_black_list structur. + +Step 3 : Recompile the kernel + + Enable MWDMA support in the kernel configuration. Recompile the kernel and + reboot. + +Step 4 : Tests + + If you have add a hard disc to the white list, please run some stress tests + for verification. + + +ACKNOWLEDGMENTS +--------------- + +These drivers wouldn't have been done without the base of kernel 2.4.x AU1XXX +IDE driver from AMD. + +Additional input also from: +Matthias Lenk + +Happy hacking! +Enrico Walther diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 8746e1b1621b..dc5c629af106 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -799,7 +799,7 @@ config MIPS_BOSPORUS config MIPS_DB1200 bool "AMD Alchemy DB1200 board" select SOC_AU1200 - select DMA_NONCOHERENT + select DMA_COHERENT select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c index 8f78c2fe7cf5..eb5803aed91b 100644 --- a/arch/mips/au1000/common/dbdma.c +++ b/arch/mips/au1000/common/dbdma.c @@ -197,6 +197,12 @@ find_dbdev_id (u32 id) return NULL; } +void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp) +{ + return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr)); +} +EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt); + u32 au1xxx_ddma_add_device(dbdev_tab_t *dev) { diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 0c3fd726c3d6..4aca18f0e290 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -12,7 +12,7 @@ #include #include -#include +#include /* OHCI (USB full speed host controller) */ static struct resource au1xxx_usb_ohci_resources[] = { @@ -154,7 +154,6 @@ static struct platform_device au1xxx_usb_otg_device = { .resource = au1xxx_usb_otg_resources, }; -/*** AU1200 LCD controller ***/ static struct resource au1200_lcd_resources[] = { [0] = { .start = LCD_PHYS_ADDR, @@ -168,6 +167,19 @@ static struct resource au1200_lcd_resources[] = { } }; +static struct resource au1200_ide0_resources[] = { + [0] = { + .start = AU1XXX_ATA_PHYS_ADDR, + .end = AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1XXX_ATA_INT, + .end = AU1XXX_ATA_INT, + .flags = IORESOURCE_IRQ, + } +}; + static u64 au1200_lcd_dmamask = ~(u32)0; static struct platform_device au1200_lcd_device = { @@ -180,6 +192,21 @@ static struct platform_device au1200_lcd_device = { .num_resources = ARRAY_SIZE(au1200_lcd_resources), .resource = au1200_lcd_resources, }; + + +static u64 ide0_dmamask = ~(u32)0; + +static struct platform_device au1200_ide0_device = { + .name = "au1200-ide", + .id = 0, + .dev = { + .dma_mask = &ide0_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(au1200_ide0_resources), + .resource = au1200_ide0_resources, +}; + #endif static struct platform_device *au1xxx_platform_devices[] __initdata = { @@ -194,6 +221,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { &au1xxx_usb_gdt_device, &au1xxx_usb_otg_device, &au1200_lcd_device, + &au1200_ide0_device, #endif }; diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c index 2ec64e78aa01..59e70e5cf325 100644 --- a/arch/mips/au1000/pb1200/irqmap.c +++ b/arch/mips/au1000/pb1200/irqmap.c @@ -22,6 +22,7 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include @@ -65,7 +66,7 @@ int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t); */ static volatile int pb1200_cascade_en=0; -void pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs) +irqreturn_t pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs) { unsigned short bisr = bcsr->int_status; int extirq_nr = 0; @@ -78,6 +79,7 @@ void pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs) /* Ack and dispatch IRQ */ do_IRQ(extirq_nr,regs); } + return IRQ_RETVAL(1); } inline void pb1200_enable_irq(unsigned int irq_nr) @@ -97,7 +99,7 @@ static unsigned int pb1200_startup_irq( unsigned int irq_nr ) if (++pb1200_cascade_en == 1) { request_irq(AU1000_GPIO_7, &pb1200_cascade_handler, - 0, "Pb1200 Cascade", &pb1200_cascade_handler ); + 0, "Pb1200 Cascade", (void *)&pb1200_cascade_handler ); #ifdef CONFIG_MIPS_PB1200 /* We have a problem with CPLD rev3. Enable a workaround */ if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 1cadd2c3cadd..a737886e39d1 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -778,6 +778,35 @@ config BLK_DEV_IDE_PMAC_BLINK This option enables the use of the sleep LED as a hard drive activity LED. +config BLK_DEV_IDE_AU1XXX + bool "IDE for AMD Alchemy Au1200" + depends on SOC_AU1200 +choice + prompt "IDE Mode for AMD Alchemy Au1200" + default CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA + depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX + +config BLK_DEV_IDE_AU1XXX_PIO_DBDMA + bool "PIO+DbDMA IDE for AMD Alchemy Au1200" + +config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + bool "MDMA2+DbDMA IDE for AMD Alchemy Au1200" + depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX +endchoice + +config BLK_DEV_IDE_AU1XXX_BURSTABLE_ON + bool "Enable burstable Mode on DbDMA" + default false + depends BLK_DEV_IDE_AU1XXX + help + This option enable the burstable Flag on DbDMA controller + (cf. "AMD Alchemy 'Au1200' Processor Data Book - PRELIMINARY"). + +config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ + int "Maximum transfer size (KB) per request (up to 128)" + default "128" + depends BLK_DEV_IDE_AU1XXX + config IDE_ARM def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK) @@ -1013,7 +1042,7 @@ config BLK_DEV_UMC8672 endif config BLK_DEV_IDEDMA - def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS + def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA config IDEDMA_IVB bool "IGNORE word93 Validation BITS" diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 4063d2c34e3d..84665e2ba3c8 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -64,6 +64,7 @@ static int proc_ide_read_imodel case ide_cy82c693: name = "cy82c693"; break; case ide_4drives: name = "4drives"; break; case ide_pmac: name = "mac-io"; break; + case ide_au1xxx: name = "au1xxx"; break; default: name = "(unknown)"; break; } len = sprintf(page, "%s\n", name); diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c new file mode 100644 index 000000000000..2b6327c576b9 --- /dev/null +++ b/drivers/ide/mips/au1xxx-ide.c @@ -0,0 +1,1250 @@ +/* + * linux/drivers/ide/mips/au1xxx-ide.c version 01.30.00 Aug. 02 2005 + * + * BRIEF MODULE DESCRIPTION + * AMD Alchemy Au1xxx IDE interface routines over the Static Bus + * + * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any later + * version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE + * Interface and Linux Device Driver" Application Note. + */ +#undef REALLY_SLOW_IO /* most systems can safely undef this */ + +#include /* for CONFIG_BLK_DEV_IDEPCI */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#if CONFIG_PM +#include +#endif + +#include + +#define DRV_NAME "au1200-ide" +#define DRV_VERSION "1.0" +#define DRV_AUTHOR "AMD PCS / Pete Popov " +#define DRV_DESC "Au1200 IDE" + +static _auide_hwif auide_hwif; +static spinlock_t ide_tune_drive_spin_lock = SPIN_LOCK_UNLOCKED; +static spinlock_t ide_tune_chipset_spin_lock = SPIN_LOCK_UNLOCKED; +static int dbdma_init_done = 0; + +/* + * local I/O functions + */ +u8 auide_inb(unsigned long port) +{ + return (au_readb(port)); +} + +u16 auide_inw(unsigned long port) +{ + return (au_readw(port)); +} + +u32 auide_inl(unsigned long port) +{ + return (au_readl(port)); +} + +void auide_insw(unsigned long port, void *addr, u32 count) +{ +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) + + _auide_hwif *ahwif = &auide_hwif; + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + + if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, + DDMA_FLAGS_NOIE)) { + printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); + return; + } + ctp = *((chan_tab_t **)ahwif->rx_chan); + dp = ctp->cur_ptr; + while (dp->dscr_cmd0 & DSCR_CMD0_V) + ; + ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); +#else + while (count--) + { + *(u16 *)addr = au_readw(port); + addr +=2 ; + } +#endif +} + +void auide_insl(unsigned long port, void *addr, u32 count) +{ + while (count--) + { + *(u32 *)addr = au_readl(port); + /* NOTE: For IDE interfaces over PCMCIA, + * 32-bit access does not work + */ + addr += 4; + } +} + +void auide_outb(u8 addr, unsigned long port) +{ + return (au_writeb(addr, port)); +} + +void auide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port) +{ + return (au_writeb(addr, port)); +} + +void auide_outw(u16 addr, unsigned long port) +{ + return (au_writew(addr, port)); +} + +void auide_outl(u32 addr, unsigned long port) +{ + return (au_writel(addr, port)); +} + +void auide_outsw(unsigned long port, void *addr, u32 count) +{ +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) + _auide_hwif *ahwif = &auide_hwif; + chan_tab_t *ctp; + au1x_ddma_desc_t *dp; + + if(!put_source_flags(ahwif->tx_chan, (void*)addr, + count << 1, DDMA_FLAGS_NOIE)) { + printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__); + return; + } + ctp = *((chan_tab_t **)ahwif->tx_chan); + dp = ctp->cur_ptr; + while (dp->dscr_cmd0 & DSCR_CMD0_V) + ; + ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp); +#else + while (count--) + { + au_writew(*(u16 *)addr, port); + addr += 2; + } +#endif +} + +void auide_outsl(unsigned long port, void *addr, u32 count) +{ + while (count--) + { + au_writel(*(u32 *)addr, port); + /* NOTE: For IDE interfaces over PCMCIA, + * 32-bit access does not work + */ + addr += 4; + } +} + +static void auide_tune_drive(ide_drive_t *drive, byte pio) +{ + int mem_sttime; + int mem_stcfg; + unsigned long flags; + u8 speed; + + /* get the best pio mode for the drive */ + pio = ide_get_best_pio_mode(drive, pio, 4, NULL); + + printk("%s: setting Au1XXX IDE to PIO mode%d\n", + drive->name, pio); + + spin_lock_irqsave(&ide_tune_drive_spin_lock, flags); + + mem_sttime = 0; + mem_stcfg = au_readl(MEM_STCFG2); + + /* set pio mode! */ + switch(pio) { + case 0: + /* set timing parameters for RCS2# */ + mem_sttime = SBC_IDE_PIO0_TWCS + | SBC_IDE_PIO0_TCSH + | SBC_IDE_PIO0_TCSOFF + | SBC_IDE_PIO0_TWP + | SBC_IDE_PIO0_TCSW + | SBC_IDE_PIO0_TPM + | SBC_IDE_PIO0_TA; + /* set configuration for RCS2# */ + mem_stcfg |= TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS; + + au_writel(mem_sttime,MEM_STTIME2); + au_writel(mem_stcfg,MEM_STCFG2); + break; + + case 1: + /* set timing parameters for RCS2# */ + mem_sttime = SBC_IDE_PIO1_TWCS + | SBC_IDE_PIO1_TCSH + | SBC_IDE_PIO1_TCSOFF + | SBC_IDE_PIO1_TWP + | SBC_IDE_PIO1_TCSW + | SBC_IDE_PIO1_TPM + | SBC_IDE_PIO1_TA; + /* set configuration for RCS2# */ + mem_stcfg |= TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS; + break; + + case 2: + /* set timing parameters for RCS2# */ + mem_sttime = SBC_IDE_PIO2_TWCS + | SBC_IDE_PIO2_TCSH + | SBC_IDE_PIO2_TCSOFF + | SBC_IDE_PIO2_TWP + | SBC_IDE_PIO2_TCSW + | SBC_IDE_PIO2_TPM + | SBC_IDE_PIO2_TA; + /* set configuration for RCS2# */ + mem_stcfg &= ~TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS; + break; + + case 3: + /* set timing parameters for RCS2# */ + mem_sttime = SBC_IDE_PIO3_TWCS + | SBC_IDE_PIO3_TCSH + | SBC_IDE_PIO3_TCSOFF + | SBC_IDE_PIO3_TWP + | SBC_IDE_PIO3_TCSW + | SBC_IDE_PIO3_TPM + | SBC_IDE_PIO3_TA; + /* set configuration for RCS2# */ + mem_stcfg |= TS_MASK; + mem_stcfg &= ~TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS; + + break; + + case 4: + /* set timing parameters for RCS2# */ + mem_sttime = SBC_IDE_PIO4_TWCS + | SBC_IDE_PIO4_TCSH + | SBC_IDE_PIO4_TCSOFF + | SBC_IDE_PIO4_TWP + | SBC_IDE_PIO4_TCSW + | SBC_IDE_PIO4_TPM + | SBC_IDE_PIO4_TA; + /* set configuration for RCS2# */ + mem_stcfg &= ~TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS; + break; + } + + au_writel(mem_sttime,MEM_STTIME2); + au_writel(mem_stcfg,MEM_STCFG2); + + spin_unlock_irqrestore(&ide_tune_drive_spin_lock, flags); + + speed = pio + XFER_PIO_0; + ide_config_drive_speed(drive, speed); +} + +static int auide_tune_chipset (ide_drive_t *drive, u8 speed) +{ + u8 mode = 0; + int mem_sttime; + int mem_stcfg; + unsigned long flags; +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + struct hd_driveid *id = drive->id; + + /* + * Now see what the current drive is capable of, + * selecting UDMA only if the mate said it was ok. + */ + if (id && (id->capability & 1) && drive->autodma && + !__ide_dma_bad_drive(drive)) { + if (!mode && (id->field_valid & 2) && (id->dma_mword & 7)) { + if (id->dma_mword & 4) + mode = XFER_MW_DMA_2; + else if (id->dma_mword & 2) + mode = XFER_MW_DMA_1; + else if (id->dma_mword & 1) + mode = XFER_MW_DMA_0; + } + } +#endif + + spin_lock_irqsave(&ide_tune_chipset_spin_lock, flags); + + mem_sttime = 0; + mem_stcfg = au_readl(MEM_STCFG2); + + switch(speed) { + case XFER_PIO_4: + case XFER_PIO_3: + case XFER_PIO_2: + case XFER_PIO_1: + case XFER_PIO_0: + auide_tune_drive(drive, (speed - XFER_PIO_0)); + break; +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + case XFER_MW_DMA_2: + /* set timing parameters for RCS2# */ + mem_sttime = SBC_IDE_MDMA2_TWCS + | SBC_IDE_MDMA2_TCSH + | SBC_IDE_MDMA2_TCSOFF + | SBC_IDE_MDMA2_TWP + | SBC_IDE_MDMA2_TCSW + | SBC_IDE_MDMA2_TPM + | SBC_IDE_MDMA2_TA; + /* set configuration for RCS2# */ + mem_stcfg &= ~TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS; + + mode = XFER_MW_DMA_2; + break; + case XFER_MW_DMA_1: + /* set timing parameters for RCS2# */ + mem_sttime = SBC_IDE_MDMA1_TWCS + | SBC_IDE_MDMA1_TCSH + | SBC_IDE_MDMA1_TCSOFF + | SBC_IDE_MDMA1_TWP + | SBC_IDE_MDMA1_TCSW + | SBC_IDE_MDMA1_TPM + | SBC_IDE_MDMA1_TA; + /* set configuration for RCS2# */ + mem_stcfg &= ~TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS; + + mode = XFER_MW_DMA_1; + break; + case XFER_MW_DMA_0: + /* set timing parameters for RCS2# */ + mem_sttime = SBC_IDE_MDMA0_TWCS + | SBC_IDE_MDMA0_TCSH + | SBC_IDE_MDMA0_TCSOFF + | SBC_IDE_MDMA0_TWP + | SBC_IDE_MDMA0_TCSW + | SBC_IDE_MDMA0_TPM + | SBC_IDE_MDMA0_TA; + /* set configuration for RCS2# */ + mem_stcfg |= TS_MASK; + mem_stcfg &= ~TCSOE_MASK; + mem_stcfg &= ~TOECS_MASK; + mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS; + + mode = XFER_MW_DMA_0; + break; +#endif + default: + return 1; + } + + /* + * Tell the drive to switch to the new mode; abort on failure. + */ + if (!mode || ide_config_drive_speed(drive, mode)) + { + return 1; /* failure */ + } + + + au_writel(mem_sttime,MEM_STTIME2); + au_writel(mem_stcfg,MEM_STCFG2); + + spin_unlock_irqrestore(&ide_tune_chipset_spin_lock, flags); + + return 0; +} + +/* + * Multi-Word DMA + DbDMA functions + */ +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + +static int in_drive_list(struct hd_driveid *id, + const struct drive_list_entry *drive_table) +{ + for ( ; drive_table->id_model ; drive_table++){ + if ((!strcmp(drive_table->id_model, id->model)) && + ((strstr(drive_table->id_firmware, id->fw_rev)) || + (!strcmp(drive_table->id_firmware, "ALL"))) + ) + return 1; + } + return 0; +} + +static int auide_build_sglist(ide_drive_t *drive, struct request *rq) +{ + ide_hwif_t *hwif = drive->hwif; + _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; + struct scatterlist *sg = hwif->sg_table; + + ide_map_sg(drive, rq); + + if (rq_data_dir(rq) == READ) + hwif->sg_dma_direction = DMA_FROM_DEVICE; + else + hwif->sg_dma_direction = DMA_TO_DEVICE; + + return dma_map_sg(ahwif->dev, sg, hwif->sg_nents, + hwif->sg_dma_direction); +} + +static int auide_build_dmatable(ide_drive_t *drive) +{ + int i, iswrite, count = 0; + ide_hwif_t *hwif = HWIF(drive); + + struct request *rq = HWGROUP(drive)->rq; + + _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; + struct scatterlist *sg; + + iswrite = (rq_data_dir(rq) == WRITE); + /* Save for interrupt context */ + ahwif->drive = drive; + + /* Build sglist */ + hwif->sg_nents = i = auide_build_sglist(drive, rq); + + if (!i) + return 0; + + /* fill the descriptors */ + sg = hwif->sg_table; + while (i && sg_dma_len(sg)) { + u32 cur_addr; + u32 cur_len; + + cur_addr = sg_dma_address(sg); + cur_len = sg_dma_len(sg); + + while (cur_len) { + u32 flags = DDMA_FLAGS_NOIE; + unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00; + + if (++count >= PRD_ENTRIES) { + printk(KERN_WARNING "%s: DMA table too small\n", + drive->name); + goto use_pio_instead; + } + + /* Lets enable intr for the last descriptor only */ + if (1==i) + flags = DDMA_FLAGS_IE; + else + flags = DDMA_FLAGS_NOIE; + + if (iswrite) { + if(!put_source_flags(ahwif->tx_chan, + (void*)(page_address(sg->page) + + sg->offset), + tc, flags)) { + printk(KERN_ERR "%s failed %d\n", + __FUNCTION__, __LINE__); + } + } else + { + if(!put_dest_flags(ahwif->rx_chan, + (void*)(page_address(sg->page) + + sg->offset), + tc, flags)) { + printk(KERN_ERR "%s failed %d\n", + __FUNCTION__, __LINE__); + } + } + + cur_addr += tc; + cur_len -= tc; + } + sg++; + i--; + } + + if (count) + return 1; + +use_pio_instead: + dma_unmap_sg(ahwif->dev, + hwif->sg_table, + hwif->sg_nents, + hwif->sg_dma_direction); + + return 0; /* revert to PIO for this request */ +} + +static int auide_dma_end(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + _auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data; + + if (hwif->sg_nents) { + dma_unmap_sg(ahwif->dev, hwif->sg_table, hwif->sg_nents, + hwif->sg_dma_direction); + hwif->sg_nents = 0; + } + + return 0; +} + +static void auide_dma_start(ide_drive_t *drive ) +{ +// printk("%s\n", __FUNCTION__); +} + +ide_startstop_t auide_dma_intr(ide_drive_t *drive) +{ + //printk("%s\n", __FUNCTION__); + + u8 stat = 0, dma_stat = 0; + + dma_stat = HWIF(drive)->ide_dma_end(drive); + stat = HWIF(drive)->INB(IDE_STATUS_REG); /* get drive status */ + if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) { + if (!dma_stat) { + struct request *rq = HWGROUP(drive)->rq; + + ide_end_request(drive, 1, rq->nr_sectors); + return ide_stopped; + } + printk(KERN_ERR "%s: dma_intr: bad DMA status (dma_stat=%x)\n", + drive->name, dma_stat); + } + return ide_error(drive, "dma_intr", stat); +} + +static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command) +{ + //printk("%s\n", __FUNCTION__); + + /* issue cmd to drive */ + ide_execute_command(drive, command, &auide_dma_intr, + (2*WAIT_CMD), NULL); +} + +static int auide_dma_setup(ide_drive_t *drive) +{ +// printk("%s\n", __FUNCTION__); + + if (drive->media != ide_disk) + return 1; + + if (!auide_build_dmatable(drive)) + /* try PIO instead of DMA */ + return 1; + + drive->waiting_for_dma = 1; + + return 0; +} + +static int auide_dma_check(ide_drive_t *drive) +{ +// printk("%s\n", __FUNCTION__); + +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + if( !dbdma_init_done ){ + auide_hwif.white_list = in_drive_list(drive->id, + dma_white_list); + auide_hwif.black_list = in_drive_list(drive->id, + dma_black_list); + auide_hwif.drive = drive; + auide_ddma_init(&auide_hwif); + dbdma_init_done = 1; + } +#endif + + /* Is the drive in our DMA black list? */ + if ( auide_hwif.black_list ) { + drive->using_dma = 0; + printk("%s found in dma_blacklist[]! Disabling DMA.\n", + drive->id->model); + } + else + drive->using_dma = 1; + + return HWIF(drive)->ide_dma_host_on(drive); +} + +static int auide_dma_test_irq(ide_drive_t *drive) +{ +// printk("%s\n", __FUNCTION__); + + if (!drive->waiting_for_dma) + printk(KERN_WARNING "%s: ide_dma_test_irq \ + called while not waiting\n", drive->name); + + /* If dbdma didn't execute the STOP command yet, the + * active bit is still set + */ + drive->waiting_for_dma++; + if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) { + printk(KERN_WARNING "%s: timeout waiting for ddma to \ + complete\n", drive->name); + return 1; + } + udelay(10); + return 0; +} + +static int auide_dma_host_on(ide_drive_t *drive) +{ +// printk("%s\n", __FUNCTION__); + return 0; +} + +static int auide_dma_on(ide_drive_t *drive) +{ +// printk("%s\n", __FUNCTION__); + drive->using_dma = 1; + return auide_dma_host_on(drive); +} + + +static int auide_dma_host_off(ide_drive_t *drive) +{ +// printk("%s\n", __FUNCTION__); + return 0; +} + +static int auide_dma_off_quietly(ide_drive_t *drive) +{ +// printk("%s\n", __FUNCTION__); + drive->using_dma = 0; + return auide_dma_host_off(drive); +} + +static int auide_dma_lostirq(ide_drive_t *drive) +{ +// printk("%s\n", __FUNCTION__); + + printk(KERN_ERR "%s: IRQ lost\n", drive->name); + return 0; +} + +static void auide_ddma_tx_callback(int irq, void *param, struct pt_regs *regs) +{ +// printk("%s\n", __FUNCTION__); + + _auide_hwif *ahwif = (_auide_hwif*)param; + ahwif->drive->waiting_for_dma = 0; + return; +} + +static void auide_ddma_rx_callback(int irq, void *param, struct pt_regs *regs) +{ +// printk("%s\n", __FUNCTION__); + + _auide_hwif *ahwif = (_auide_hwif*)param; + ahwif->drive->waiting_for_dma = 0; + return; +} + +static int auide_dma_timeout(ide_drive_t *drive) +{ +// printk("%s\n", __FUNCTION__); + + printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name); + + if (HWIF(drive)->ide_dma_test_irq(drive)) + return 0; + + return HWIF(drive)->ide_dma_end(drive); +} +#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ + + +static int auide_ddma_init( _auide_hwif *auide ) +{ +// printk("%s\n", __FUNCTION__); + + dbdev_tab_t source_dev_tab; +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) + dbdev_tab_t target_dev_tab; + ide_hwif_t *hwif = auide->hwif; + char warning_output [2][80]; + int i; +#endif + + /* Add our custom device to DDMA device table */ + /* Create our new device entries in the table */ +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) + source_dev_tab.dev_id = AU1XXX_ATA_DDMA_REQ; + + if( auide->white_list || auide->black_list ){ + source_dev_tab.dev_tsize = 8; + source_dev_tab.dev_devwidth = 32; + source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; + source_dev_tab.dev_intlevel = 0; + source_dev_tab.dev_intpolarity = 0; + + /* init device table for target - static bus controller - */ + target_dev_tab.dev_id = DSCR_CMD0_ALWAYS; + target_dev_tab.dev_tsize = 8; + target_dev_tab.dev_devwidth = 32; + target_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; + target_dev_tab.dev_intlevel = 0; + target_dev_tab.dev_intpolarity = 0; + target_dev_tab.dev_flags = DEV_FLAGS_ANYUSE; + } + else{ + source_dev_tab.dev_tsize = 1; + source_dev_tab.dev_devwidth = 16; + source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; + source_dev_tab.dev_intlevel = 0; + source_dev_tab.dev_intpolarity = 0; + + /* init device table for target - static bus controller - */ + target_dev_tab.dev_id = DSCR_CMD0_ALWAYS; + target_dev_tab.dev_tsize = 1; + target_dev_tab.dev_devwidth = 16; + target_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; + target_dev_tab.dev_intlevel = 0; + target_dev_tab.dev_intpolarity = 0; + target_dev_tab.dev_flags = DEV_FLAGS_ANYUSE; + + sprintf(&warning_output[0][0], + "%s is not on ide driver white list.", + auide_hwif.drive->id->model); + for ( i=strlen(&warning_output[0][0]) ; i<76; i++ ){ + sprintf(&warning_output[0][i]," "); + } + + sprintf(&warning_output[1][0], + "To add %s please read 'Documentation/mips/AU1xxx_IDE.README'.", + auide_hwif.drive->id->model); + for ( i=strlen(&warning_output[1][0]) ; i<76; i++ ){ + sprintf(&warning_output[1][i]," "); + } + + printk("\n****************************************"); + printk("****************************************\n"); + printk("* %s *\n",&warning_output[0][0]); + printk("* Switch to safe MWDMA Mode! "); + printk(" *\n"); + printk("* %s *\n",&warning_output[1][0]); + printk("****************************************"); + printk("****************************************\n\n"); + } +#else + source_dev_tab.dev_id = DSCR_CMD0_ALWAYS; + source_dev_tab.dev_tsize = 8; + source_dev_tab.dev_devwidth = 32; + source_dev_tab.dev_physaddr = (u32)AU1XXX_ATA_PHYS_ADDR; + source_dev_tab.dev_intlevel = 0; + source_dev_tab.dev_intpolarity = 0; +#endif + +#if CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON + /* set flags for tx channel */ + source_dev_tab.dev_flags = DEV_FLAGS_OUT + | DEV_FLAGS_SYNC + | DEV_FLAGS_BURSTABLE; + auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); + /* set flags for rx channel */ + source_dev_tab.dev_flags = DEV_FLAGS_IN + | DEV_FLAGS_SYNC + | DEV_FLAGS_BURSTABLE; + auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); +#else + /* set flags for tx channel */ + source_dev_tab.dev_flags = DEV_FLAGS_OUT | DEV_FLAGS_SYNC; + auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); + /* set flags for rx channel */ + source_dev_tab.dev_flags = DEV_FLAGS_IN | DEV_FLAGS_SYNC; + auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab ); +#endif + +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) + + auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab); + + /* Get a channel for TX */ + auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id, + auide->tx_dev_id, + auide_ddma_tx_callback, + (void*)auide); + /* Get a channel for RX */ + auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id, + auide->target_dev_id, + auide_ddma_rx_callback, + (void*)auide); +#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */ + /* + * Note: if call back is not enabled, update ctp->cur_ptr manually + */ + auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS, + auide->tx_dev_id, + NULL, + (void*)auide); + auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id, + DSCR_CMD0_ALWAYS, + NULL, + (void*)auide); +#endif + auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan, + NUM_DESCRIPTORS); + auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan, + NUM_DESCRIPTORS); + +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) + hwif->dmatable_cpu = dma_alloc_coherent(auide->dev, + PRD_ENTRIES * PRD_BYTES, /* 1 Page */ + &hwif->dmatable_dma, GFP_KERNEL); + + auide->sg_table = kmalloc(sizeof(struct scatterlist) * PRD_ENTRIES, + GFP_KERNEL|GFP_DMA); + if (auide->sg_table == NULL) { + return -ENOMEM; + } +#endif + au1xxx_dbdma_start( auide->tx_chan ); + au1xxx_dbdma_start( auide->rx_chan ); + return 0; +} + +static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif) +{ + int i; +#define ide_ioreg_t unsigned long + ide_ioreg_t *ata_regs = hw->io_ports; + + /* fixme */ + for (i = 0; i < IDE_CONTROL_OFFSET; i++) { + *ata_regs++ = (ide_ioreg_t) ahwif->regbase + + (ide_ioreg_t)(i << AU1XXX_ATA_REG_OFFSET); + } + + /* set the Alternative Status register */ + *ata_regs = (ide_ioreg_t) ahwif->regbase + + (ide_ioreg_t)(14 << AU1XXX_ATA_REG_OFFSET); +} + +static int au_ide_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + _auide_hwif *ahwif = &auide_hwif; + ide_hwif_t *hwif; + struct resource *res; + int ret = 0; + +#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA) + char *mode = "MWDMA2"; +#elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA) + char *mode = "PIO+DDMA(offload)"; +#endif + + memset(&auide_hwif, 0, sizeof(_auide_hwif)); + auide_hwif.dev = 0; + + ahwif->dev = dev; + ahwif->irq = platform_get_irq(pdev, 0); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (res == NULL) { + pr_debug("%s %d: no base address\n", DRV_NAME, pdev->id); + ret = -ENODEV; + goto out; + } + + if (!request_mem_region (res->start, res->end-res->start, pdev->name)) { + pr_debug("%s: request_mem_region failed\n", DRV_NAME); + ret = -EBUSY; + goto out; + } + + ahwif->regbase = (u32)ioremap(res->start, res->end-res->start); + if (ahwif->regbase == 0) { + ret = -ENOMEM; + goto out; + } + + hwif = &ide_hwifs[pdev->id]; + hw_regs_t *hw = &hwif->hw; + hwif->irq = hw->irq = ahwif->irq; + hwif->chipset = ide_au1xxx; + + auide_setup_ports(hw, ahwif); + memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports)); + +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ + hwif->rqsize = CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ; + hwif->rqsize = ((hwif->rqsize > AU1XXX_ATA_RQSIZE) + || (hwif->rqsize < 32)) ? AU1XXX_ATA_RQSIZE : hwif->rqsize; +#else /* if kernel config is not set */ + hwif->rqsize = AU1XXX_ATA_RQSIZE; +#endif + + hwif->ultra_mask = 0x0; /* Disable Ultra DMA */ +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + hwif->mwdma_mask = 0x07; /* Multimode-2 DMA */ + hwif->swdma_mask = 0x07; +#else + hwif->mwdma_mask = 0x0; + hwif->swdma_mask = 0x0; +#endif + //hwif->noprobe = !hwif->io_ports[IDE_DATA_OFFSET]; + hwif->noprobe = 0; + hwif->drives[0].unmask = 1; + hwif->drives[1].unmask = 1; + + /* hold should be on in all cases */ + hwif->hold = 1; + hwif->mmio = 2; + + /* set up local I/O function entry points */ + hwif->INB = auide_inb; + hwif->INW = auide_inw; + hwif->INL = auide_inl; + hwif->INSW = auide_insw; + hwif->INSL = auide_insl; + hwif->OUTB = auide_outb; + hwif->OUTBSYNC = auide_outbsync; + hwif->OUTW = auide_outw; + hwif->OUTL = auide_outl; + hwif->OUTSW = auide_outsw; + hwif->OUTSL = auide_outsl; + + hwif->tuneproc = &auide_tune_drive; + hwif->speedproc = &auide_tune_chipset; + +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + hwif->ide_dma_off_quietly = &auide_dma_off_quietly; + hwif->ide_dma_timeout = &auide_dma_timeout; + + hwif->ide_dma_check = &auide_dma_check; + hwif->dma_exec_cmd = &auide_dma_exec_cmd; + hwif->dma_start = &auide_dma_start; + hwif->ide_dma_end = &auide_dma_end; + hwif->dma_setup = &auide_dma_setup; + hwif->ide_dma_test_irq = &auide_dma_test_irq; + hwif->ide_dma_host_off = &auide_dma_host_off; + hwif->ide_dma_host_on = &auide_dma_host_on; + hwif->ide_dma_lostirq = &auide_dma_lostirq; + hwif->ide_dma_on = &auide_dma_on; + + hwif->autodma = 1; + hwif->drives[0].autodma = hwif->autodma; + hwif->drives[1].autodma = hwif->autodma; + hwif->atapi_dma = 1; + hwif->drives[0].using_dma = 1; + hwif->drives[1].using_dma = 1; +#else /* !CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ + hwif->autodma = 0; + hwif->channel = 0; + hwif->hold = 1; + hwif->select_data = 0; /* no chipset-specific code */ + hwif->config_data = 0; /* no chipset-specific code */ + + hwif->drives[0].autodma = 0; + hwif->drives[0].drive_data = 0; /* no drive data */ + hwif->drives[0].using_dma = 0; + hwif->drives[0].waiting_for_dma = 0; + hwif->drives[0].autotune = 1; /* 1=autotune, 2=noautotune, 0=default */ + /* secondary hdd not supported */ + hwif->drives[1].autodma = 0; + + hwif->drives[1].drive_data = 0; + hwif->drives[1].using_dma = 0; + hwif->drives[1].waiting_for_dma = 0; + hwif->drives[1].autotune = 2; /* 1=autotune, 2=noautotune, 0=default */ +#endif + hwif->drives[0].io_32bit = 0; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */ + hwif->drives[1].io_32bit = 0; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */ + + /*Register Driver with PM Framework*/ +#ifdef CONFIG_PM + auide_hwif.pm.lock = SPIN_LOCK_UNLOCKED; + auide_hwif.pm.stopped = 0; + + auide_hwif.pm.dev = new_au1xxx_power_device( "ide", + &au1200ide_pm_callback, + NULL); + if ( auide_hwif.pm.dev == NULL ) + printk(KERN_INFO "Unable to create a power management \ + device entry for the au1200-IDE.\n"); + else + printk(KERN_INFO "Power management device entry for the \ + au1200-IDE loaded.\n"); +#endif + + auide_hwif.hwif = hwif; + hwif->hwif_data = &auide_hwif; + +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA + auide_ddma_init(&auide_hwif); + dbdma_init_done = 1; +#endif + + probe_hwif_init(hwif); + dev_set_drvdata(dev, hwif); + + printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode ); + +out: + return ret; +} + +static int au_ide_remove(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct resource *res; + ide_hwif_t *hwif = dev_get_drvdata(dev); + _auide_hwif *ahwif = &auide_hwif; + + ide_unregister(hwif - ide_hwifs); + + iounmap((void *)ahwif->regbase); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(res->start, res->end - res->start); + + return 0; +} + +static struct device_driver au1200_ide_driver = { + .name = "au1200-ide", + .bus = &platform_bus_type, + .probe = au_ide_probe, + .remove = au_ide_remove, +}; + +static int __init au_ide_init(void) +{ + return driver_register(&au1200_ide_driver); +} + +static void __init au_ide_exit(void) +{ + driver_unregister(&au1200_ide_driver); +} + +#ifdef CONFIG_PM +int au1200ide_pm_callback( au1xxx_power_dev_t *dev,\ + au1xxx_request_t request, void *data) { + + unsigned int d, err = 0; + unsigned long flags; + + spin_lock_irqsave(auide_hwif.pm.lock, flags); + + switch (request){ + case AU1XXX_PM_SLEEP: + err = au1xxxide_pm_sleep(dev); + break; + case AU1XXX_PM_WAKEUP: + d = *((unsigned int*)data); + if ( d > 0 && d <= 99) { + err = au1xxxide_pm_standby(dev); + } + else { + err = au1xxxide_pm_resume(dev); + } + break; + case AU1XXX_PM_GETSTATUS: + err = au1xxxide_pm_getstatus(dev); + break; + case AU1XXX_PM_ACCESS: + err = au1xxxide_pm_access(dev); + break; + case AU1XXX_PM_IDLE: + err = au1xxxide_pm_idle(dev); + break; + case AU1XXX_PM_CLEANUP: + err = au1xxxide_pm_cleanup(dev); + break; + default: + err = -1; + break; + } + + spin_unlock_irqrestore(auide_hwif.pm.lock, flags); + + return err; +} + +static int au1xxxide_pm_standby( au1xxx_power_dev_t *dev ) { + return 0; +} + +static int au1xxxide_pm_sleep( au1xxx_power_dev_t *dev ) { + + int retval; + ide_hwif_t *hwif = auide_hwif.hwif; + struct request rq; + struct request_pm_state rqpm; + ide_task_t args; + + if(auide_hwif.pm.stopped) + return -1; + + /* + * wait until hard disc is ready + */ + if ( wait_for_ready(&hwif->drives[0], 35000) ) { + printk("Wait for drive sleep timeout!\n"); + retval = -1; + } + + /* + * sequenz to tell the high level ide driver that pm is resuming + */ + memset(&rq, 0, sizeof(rq)); + memset(&rqpm, 0, sizeof(rqpm)); + memset(&args, 0, sizeof(args)); + rq.flags = REQ_PM_SUSPEND; + rq.special = &args; + rq.pm = &rqpm; + rqpm.pm_step = ide_pm_state_start_suspend; + rqpm.pm_state = PMSG_SUSPEND; + + retval = ide_do_drive_cmd(&hwif->drives[0], &rq, ide_wait); + + if (wait_for_ready (&hwif->drives[0], 35000)) { + printk("Wait for drive sleep timeout!\n"); + retval = -1; + } + + /* + * stop dbdma channels + */ + au1xxx_dbdma_reset(auide_hwif.tx_chan); + au1xxx_dbdma_reset(auide_hwif.rx_chan); + + auide_hwif.pm.stopped = 1; + + return retval; +} + +static int au1xxxide_pm_resume( au1xxx_power_dev_t *dev ) { + + int retval; + ide_hwif_t *hwif = auide_hwif.hwif; + struct request rq; + struct request_pm_state rqpm; + ide_task_t args; + + if(!auide_hwif.pm.stopped) + return -1; + + /* + * start dbdma channels + */ + au1xxx_dbdma_start(auide_hwif.tx_chan); + au1xxx_dbdma_start(auide_hwif.rx_chan); + + /* + * wait until hard disc is ready + */ + if (wait_for_ready ( &hwif->drives[0], 35000)) { + printk("Wait for drive wake up timeout!\n"); + retval = -1; + } + + /* + * sequenz to tell the high level ide driver that pm is resuming + */ + memset(&rq, 0, sizeof(rq)); + memset(&rqpm, 0, sizeof(rqpm)); + memset(&args, 0, sizeof(args)); + rq.flags = REQ_PM_RESUME; + rq.special = &args; + rq.pm = &rqpm; + rqpm.pm_step = ide_pm_state_start_resume; + rqpm.pm_state = PMSG_ON; + + retval = ide_do_drive_cmd(&hwif->drives[0], &rq, ide_head_wait); + + /* + * wait for hard disc + */ + if ( wait_for_ready(&hwif->drives[0], 35000) ) { + printk("Wait for drive wake up timeout!\n"); + retval = -1; + } + + auide_hwif.pm.stopped = 0; + + return retval; +} + +static int au1xxxide_pm_getstatus( au1xxx_power_dev_t *dev ) { + return dev->cur_state; +} + +static int au1xxxide_pm_access( au1xxx_power_dev_t *dev ) { + if (dev->cur_state != AWAKE_STATE) + return 0; + else + return -1; +} + +static int au1xxxide_pm_idle( au1xxx_power_dev_t *dev ) { + return 0; +} + +static int au1xxxide_pm_cleanup( au1xxx_power_dev_t *dev ) { + return 0; +} +#endif /* CONFIG_PM */ + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("AU1200 IDE driver"); + +module_init(au_ide_init); +module_exit(au_ide_exit); diff --git a/include/asm-mips/mach-au1x00/au1xxx.h b/include/asm-mips/mach-au1x00/au1xxx.h new file mode 100644 index 000000000000..b7b46dd9b929 --- /dev/null +++ b/include/asm-mips/mach-au1x00/au1xxx.h @@ -0,0 +1,44 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _AU1XXX_H_ +#define _AU1XXX_H_ + +#include + +#include + +#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) +#include + +#elif defined(CONFIG_MIPS_PB1550) +#include + +#elif defined(CONFIG_MIPS_PB1200) +#include + +#elif defined(CONFIG_MIPS_DB1200) +#include + +#endif + +#endif /* _AU1XXX_H_ */ diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h index ddbd9f5a2489..b327bcd3fee1 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h +++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h @@ -368,6 +368,7 @@ void au1xxx_dbdma_dump(u32 chanid); u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr ); u32 au1xxx_ddma_add_device( dbdev_tab_t *dev ); +void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp); /* Some compatibilty macros -- @@ -375,9 +376,12 @@ u32 au1xxx_ddma_add_device( dbdev_tab_t *dev ); */ #define au1xxx_dbdma_put_source(chanid,buf,nbytes)_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE) #define au1xxx_dbdma_put_source_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags) +#define put_source_flags(chanid,buf,nbytes,flags) au1xxx_dbdma_put_source_flags(chanid,buf,nbytes,flags) + #define au1xxx_dbdma_put_dest(chanid,buf,nbytes) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE) #define au1xxx_dbdma_put_dest_flags(chanid,buf,nbytes,flags) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags) +#define put_dest_flags(chanid,buf,nbytes,flags) au1xxx_dbdma_put_dest_flags(chanid,buf,nbytes,flags) /* * Flags for the put_source/put_dest functions. diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h new file mode 100644 index 000000000000..33d275c3b84c --- /dev/null +++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h @@ -0,0 +1,301 @@ +/* + * include/asm-mips/mach-au1x00/au1xxx_ide.h version 01.30.00 Aug. 02 2005 + * + * BRIEF MODULE DESCRIPTION + * AMD Alchemy Au1xxx IDE interface routines over the Static Bus + * + * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any later + * version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE + * Interface and Linux Device Driver" Application Note. + */ +#include + +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + #define DMA_WAIT_TIMEOUT 100 + #define NUM_DESCRIPTORS PRD_ENTRIES +#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */ + #define NUM_DESCRIPTORS 2 +#endif + +#ifndef AU1XXX_ATA_RQSIZE + #define AU1XXX_ATA_RQSIZE 128 +#endif + +/* Disable Burstable-Support for DBDMA */ +#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON + #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0 +#endif + +#ifdef CONFIG_PM +/* +* This will enable the device to be powered up when write() or read() +* is called. If this is not defined, the driver will return -EBUSY. +*/ +#define WAKE_ON_ACCESS 1 + +typedef struct +{ + spinlock_t lock; /* Used to block on state transitions */ + au1xxx_power_dev_t *dev; /* Power Managers device structure */ + unsigned stopped; /* USed to signaling device is stopped */ +} pm_state; +#endif + + +typedef struct +{ + u32 tx_dev_id, rx_dev_id, target_dev_id; + u32 tx_chan, rx_chan; + void *tx_desc_head, *rx_desc_head; + ide_hwif_t *hwif; +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + ide_drive_t *drive; + u8 white_list, black_list; + struct dbdma_cmd *dma_table_cpu; + dma_addr_t dma_table_dma; + struct scatterlist *sg_table; + int sg_nents; + int sg_dma_direction; +#endif + struct device *dev; + int irq; + u32 regbase; +#ifdef CONFIG_PM + pm_state pm; +#endif +} _auide_hwif; + +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA +struct drive_list_entry { + const char * id_model; + const char * id_firmware; +}; + +/* HD white list */ +static const struct drive_list_entry dma_white_list [] = { +/* + * Hitachi + */ + { "HITACHI_DK14FA-20" , "ALL" }, + { "HTS726060M9AT00" , "ALL" }, +/* + * Maxtor + */ + { "Maxtor 6E040L0" , "ALL" }, + { "Maxtor 6Y080P0" , "ALL" }, + { "Maxtor 6Y160P0" , "ALL" }, +/* + * Seagate + */ + { "ST3120026A" , "ALL" }, + { "ST320014A" , "ALL" }, + { "ST94011A" , "ALL" }, + { "ST340016A" , "ALL" }, +/* + * Western Digital + */ + { "WDC WD400UE-00HCT0" , "ALL" }, + { "WDC WD400JB-00JJC0" , "ALL" }, + { NULL , NULL } +}; + +/* HD black list */ +static const struct drive_list_entry dma_black_list [] = { +/* + * Western Digital + */ + { "WDC WD100EB-00CGH0" , "ALL" }, + { "WDC WD200BB-00AUA1" , "ALL" }, + { "WDC AC24300L" , "ALL" }, + { NULL , NULL } +}; +#endif + +/* function prototyping */ +u8 auide_inb(unsigned long port); +u16 auide_inw(unsigned long port); +u32 auide_inl(unsigned long port); +void auide_insw(unsigned long port, void *addr, u32 count); +void auide_insl(unsigned long port, void *addr, u32 count); +void auide_outb(u8 addr, unsigned long port); +void auide_outbsync(ide_drive_t *drive, u8 addr, unsigned long port); +void auide_outw(u16 addr, unsigned long port); +void auide_outl(u32 addr, unsigned long port); +void auide_outsw(unsigned long port, void *addr, u32 count); +void auide_outsl(unsigned long port, void *addr, u32 count); +static void auide_tune_drive(ide_drive_t *drive, byte pio); +static int auide_tune_chipset (ide_drive_t *drive, u8 speed); +static int auide_ddma_init( _auide_hwif *auide ); +static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif); +int __init auide_probe(void); + +#ifdef CONFIG_PM + int au1200ide_pm_callback( au1xxx_power_dev_t *dev, + au1xxx_request_t request, void *data); + static int au1xxxide_pm_standby( au1xxx_power_dev_t *dev ); + static int au1xxxide_pm_sleep( au1xxx_power_dev_t *dev ); + static int au1xxxide_pm_resume( au1xxx_power_dev_t *dev ); + static int au1xxxide_pm_getstatus( au1xxx_power_dev_t *dev ); + static int au1xxxide_pm_access( au1xxx_power_dev_t *dev ); + static int au1xxxide_pm_idle( au1xxx_power_dev_t *dev ); + static int au1xxxide_pm_cleanup( au1xxx_power_dev_t *dev ); +#endif + + +/* + * Multi-Word DMA + DbDMA functions + */ +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + + static int in_drive_list(struct hd_driveid *id, + const struct drive_list_entry *drive_table); + static int auide_build_sglist(ide_drive_t *drive, struct request *rq); + static int auide_build_dmatable(ide_drive_t *drive); + static int auide_dma_end(ide_drive_t *drive); + static void auide_dma_start(ide_drive_t *drive ); + ide_startstop_t auide_dma_intr (ide_drive_t *drive); + static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command); + static int auide_dma_setup(ide_drive_t *drive); + static int auide_dma_check(ide_drive_t *drive); + static int auide_dma_test_irq(ide_drive_t *drive); + static int auide_dma_host_off(ide_drive_t *drive); + static int auide_dma_host_on(ide_drive_t *drive); + static int auide_dma_lostirq(ide_drive_t *drive); + static int auide_dma_on(ide_drive_t *drive); + static void auide_ddma_tx_callback(int irq, void *param, + struct pt_regs *regs); + static void auide_ddma_rx_callback(int irq, void *param, + struct pt_regs *regs); + static int auide_dma_off_quietly(ide_drive_t *drive); + static int auide_dma_timeout(ide_drive_t *drive); + +#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */ + +/******************************************************************************* +* PIO Mode timing calculation : * +* * +* Static Bus Spec ATA Spec * +* Tcsoe = t1 * +* Toecs = t9 * +* Twcs = t9 * +* Tcsh = t2i | t2 * +* Tcsoff = t2i | t2 * +* Twp = t2 * +* Tcsw = t1 * +* Tpm = 0 * +* Ta = t1+t2 * +*******************************************************************************/ + +#define TCSOE_MASK (0x07<<29) +#define TOECS_MASK (0x07<<26) +#define TWCS_MASK (0x07<<28) +#define TCSH_MASK (0x0F<<24) +#define TCSOFF_MASK (0x07<<20) +#define TWP_MASK (0x3F<<14) +#define TCSW_MASK (0x0F<<10) +#define TPM_MASK (0x0F<<6) +#define TA_MASK (0x3F<<0) +#define TS_MASK (1<<8) + +/* Timing parameters PIO mode 0 */ +#define SBC_IDE_PIO0_TCSOE (0x04<<29) +#define SBC_IDE_PIO0_TOECS (0x01<<26) +#define SBC_IDE_PIO0_TWCS (0x02<<28) +#define SBC_IDE_PIO0_TCSH (0x08<<24) +#define SBC_IDE_PIO0_TCSOFF (0x07<<20) +#define SBC_IDE_PIO0_TWP (0x10<<14) +#define SBC_IDE_PIO0_TCSW (0x04<<10) +#define SBC_IDE_PIO0_TPM (0x0<<6) +#define SBC_IDE_PIO0_TA (0x15<<0) +/* Timing parameters PIO mode 1 */ +#define SBC_IDE_PIO1_TCSOE (0x03<<29) +#define SBC_IDE_PIO1_TOECS (0x01<<26) +#define SBC_IDE_PIO1_TWCS (0x01<<28) +#define SBC_IDE_PIO1_TCSH (0x06<<24) +#define SBC_IDE_PIO1_TCSOFF (0x06<<20) +#define SBC_IDE_PIO1_TWP (0x08<<14) +#define SBC_IDE_PIO1_TCSW (0x03<<10) +#define SBC_IDE_PIO1_TPM (0x00<<6) +#define SBC_IDE_PIO1_TA (0x0B<<0) +/* Timing parameters PIO mode 2 */ +#define SBC_IDE_PIO2_TCSOE (0x05<<29) +#define SBC_IDE_PIO2_TOECS (0x01<<26) +#define SBC_IDE_PIO2_TWCS (0x01<<28) +#define SBC_IDE_PIO2_TCSH (0x07<<24) +#define SBC_IDE_PIO2_TCSOFF (0x07<<20) +#define SBC_IDE_PIO2_TWP (0x1F<<14) +#define SBC_IDE_PIO2_TCSW (0x05<<10) +#define SBC_IDE_PIO2_TPM (0x00<<6) +#define SBC_IDE_PIO2_TA (0x22<<0) +/* Timing parameters PIO mode 3 */ +#define SBC_IDE_PIO3_TCSOE (0x05<<29) +#define SBC_IDE_PIO3_TOECS (0x01<<26) +#define SBC_IDE_PIO3_TWCS (0x01<<28) +#define SBC_IDE_PIO3_TCSH (0x0D<<24) +#define SBC_IDE_PIO3_TCSOFF (0x0D<<20) +#define SBC_IDE_PIO3_TWP (0x15<<14) +#define SBC_IDE_PIO3_TCSW (0x05<<10) +#define SBC_IDE_PIO3_TPM (0x00<<6) +#define SBC_IDE_PIO3_TA (0x1A<<0) +/* Timing parameters PIO mode 4 */ +#define SBC_IDE_PIO4_TCSOE (0x04<<29) +#define SBC_IDE_PIO4_TOECS (0x01<<26) +#define SBC_IDE_PIO4_TWCS (0x01<<28) +#define SBC_IDE_PIO4_TCSH (0x04<<24) +#define SBC_IDE_PIO4_TCSOFF (0x04<<20) +#define SBC_IDE_PIO4_TWP (0x0D<<14) +#define SBC_IDE_PIO4_TCSW (0x03<<10) +#define SBC_IDE_PIO4_TPM (0x00<<6) +#define SBC_IDE_PIO4_TA (0x12<<0) +/* Timing parameters MDMA mode 0 */ +#define SBC_IDE_MDMA0_TCSOE (0x03<<29) +#define SBC_IDE_MDMA0_TOECS (0x01<<26) +#define SBC_IDE_MDMA0_TWCS (0x01<<28) +#define SBC_IDE_MDMA0_TCSH (0x07<<24) +#define SBC_IDE_MDMA0_TCSOFF (0x07<<20) +#define SBC_IDE_MDMA0_TWP (0x0C<<14) +#define SBC_IDE_MDMA0_TCSW (0x03<<10) +#define SBC_IDE_MDMA0_TPM (0x00<<6) +#define SBC_IDE_MDMA0_TA (0x0F<<0) +/* Timing parameters MDMA mode 1 */ +#define SBC_IDE_MDMA1_TCSOE (0x05<<29) +#define SBC_IDE_MDMA1_TOECS (0x01<<26) +#define SBC_IDE_MDMA1_TWCS (0x01<<28) +#define SBC_IDE_MDMA1_TCSH (0x05<<24) +#define SBC_IDE_MDMA1_TCSOFF (0x05<<20) +#define SBC_IDE_MDMA1_TWP (0x0F<<14) +#define SBC_IDE_MDMA1_TCSW (0x05<<10) +#define SBC_IDE_MDMA1_TPM (0x00<<6) +#define SBC_IDE_MDMA1_TA (0x15<<0) +/* Timing parameters MDMA mode 2 */ +#define SBC_IDE_MDMA2_TCSOE (0x04<<29) +#define SBC_IDE_MDMA2_TOECS (0x01<<26) +#define SBC_IDE_MDMA2_TWCS (0x01<<28) +#define SBC_IDE_MDMA2_TCSH (0x04<<24) +#define SBC_IDE_MDMA2_TCSOFF (0x04<<20) +#define SBC_IDE_MDMA2_TWP (0x0D<<14) +#define SBC_IDE_MDMA2_TCSW (0x04<<10) +#define SBC_IDE_MDMA2_TPM (0x00<<6) +#define SBC_IDE_MDMA2_TA (0x12<<0) + diff --git a/include/linux/ide.h b/include/linux/ide.h index a6dbb51ecd7b..3461abc1e854 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -218,7 +218,7 @@ typedef enum { ide_unknown, ide_generic, ide_pci, ide_rz1000, ide_trm290, ide_cmd646, ide_cy82c693, ide_4drives, ide_pmac, ide_etrax100, ide_acorn, - ide_forced + ide_au1xxx, ide_forced } hwif_chipset_t; /* -- cgit