From 8ecada16512c90ae782b00f15ebff0c32e4cd92a Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 28 Jun 2013 15:49:39 +0200 Subject: doc: printk-formats: fix format specifier to %p[Ii]4[hnbl] This might have been an oversight, as '4' is needed as %pI4/%pi4 are format specifiers and [hnbl] are extensions of it. Signed-off-by: Daniel Borkmann CC: Joe Perches Signed-off-by: Jiri Kosina --- Documentation/printk-formats.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 3af5ae6c9c11..1525e91f94d8 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -97,7 +97,7 @@ IPv4 addresses: %pI4 1.2.3.4 %pi4 001.002.003.004 - %p[Ii][hnbl] + %p[Ii]4[hnbl] For printing IPv4 dot-separated decimal addresses. The 'I4' and 'i4' specifiers result in a printed address with ('i4') or without ('I4') -- cgit From 9ca18397760824491bac572d6600eb3db3331a14 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Tue, 23 Jul 2013 00:13:48 +0900 Subject: doc: devicetree: bindings: Fix typo in bindings Correct spelling typo in devicetree/bindings. Singed-off-by: Masanari Iida Signed-off-by: Jiri Kosina --- Documentation/devicetree/bindings/arm/ste-u300.txt | 2 +- Documentation/devicetree/bindings/dma/atmel-dma.txt | 4 ++-- Documentation/devicetree/bindings/dma/fsl-imx-dma.txt | 2 +- Documentation/devicetree/bindings/dma/ste-dma40.txt | 4 ++-- Documentation/devicetree/bindings/mfd/cros-ec.txt | 2 +- 5 files changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/ste-u300.txt b/Documentation/devicetree/bindings/arm/ste-u300.txt index 69b5ab0b5f4b..d11d80006a19 100644 --- a/Documentation/devicetree/bindings/arm/ste-u300.txt +++ b/Documentation/devicetree/bindings/arm/ste-u300.txt @@ -22,7 +22,7 @@ This contains the board-specific information. - compatible: must be "stericsson,s365". - vana15-supply: the regulator supplying the 1.5V to drive the board. -- syscon: a pointer to the syscon node so we can acccess the +- syscon: a pointer to the syscon node so we can access the syscon registers to set the board as self-powered. Example: diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt index c280a0e6f42d..e1f343c7a34b 100644 --- a/Documentation/devicetree/bindings/dma/atmel-dma.txt +++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt @@ -18,14 +18,14 @@ dma0: dma@ffffec00 { DMA clients connected to the Atmel DMA controller must use the format described in the dma.txt file, using a three-cell specifier for each channel: -a phandle plus two interger cells. +a phandle plus two integer cells. The three cells in order are: 1. A phandle pointing to the DMA controller. 2. The memory interface (16 most significant bits), the peripheral interface (16 less significant bits). 3. Parameters for the at91 DMA configuration register which are device -dependant: +dependent: - bit 7-0: peripheral identifier for the hardware handshaking interface. The identifier can be different for tx and rx. - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP. diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt index 2717ecb47db9..7bd8847d6394 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt @@ -34,7 +34,7 @@ Clients have to specify the DMA requests with phandles in a list. Required properties: - dmas: List of one or more DMA request specifiers. One DMA request specifier consists of a phandle to the DMA controller followed by the integer - specifiying the request line. + specifying the request line. - dma-names: List of string identifiers for the DMA requests. For the correct names, have a look at the specific client driver. diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt index bea5b73a7390..a8c21c256baa 100644 --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -37,14 +37,14 @@ Each dmas request consists of 4 cells: 1. A phandle pointing to the DMA controller 2. Device Type 3. The DMA request line number (only when 'use fixed channel' is set) - 4. A 32bit mask specifying; mode, direction and endianess [NB: This list will grow] + 4. A 32bit mask specifying; mode, direction and endianness [NB: This list will grow] 0x00000001: Mode: Logical channel when unset Physical channel when set 0x00000002: Direction: Memory to Device when unset Device to Memory when set - 0x00000004: Endianess: + 0x00000004: Endianness: Little endian when unset Big endian when set 0x00000008: Use fixed channel: diff --git a/Documentation/devicetree/bindings/mfd/cros-ec.txt b/Documentation/devicetree/bindings/mfd/cros-ec.txt index e0e59c58a1f9..5f229c5f6da9 100644 --- a/Documentation/devicetree/bindings/mfd/cros-ec.txt +++ b/Documentation/devicetree/bindings/mfd/cros-ec.txt @@ -4,7 +4,7 @@ Google's ChromeOS EC is a Cortex-M device which talks to the AP and implements various function such as keyboard and battery charging. The EC can be connect through various means (I2C, SPI, LPC) and the -compatible string used depends on the inteface. Each connection method has +compatible string used depends on the interface. Each connection method has its own driver which connects to the top level interface-agnostic EC driver. Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to the top-level driver. -- cgit From 30abda170be7cbd9bce9a7026ce83ce1f74c0e7a Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 12 Jul 2013 08:53:43 +0530 Subject: Documentation: clk: Fix a trivial typo in audss Fixes a trivial typo. Signed-off-by: Sachin Kamat Signed-off-by: Jiri Kosina --- Documentation/devicetree/bindings/clock/clk-exynos-audss.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt index a1201802f90d..75e2e1999f87 100644 --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt @@ -2,7 +2,7 @@ The Samsung Audio Subsystem clock controller generates and supplies clocks to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock -binding described here is applicable to all SoC's in Exynos family. +binding described here is applicable to all SoCs in Exynos family. Required Properties: -- cgit From c9f3f2d8b3247b7e16b3cd66698e690ab4697301 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Thu, 18 Jul 2013 01:29:12 +0900 Subject: doc: Fix typo in doucmentations Correct typo (double words) in documentations. Signed-off-by: Masanari Iida Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- Documentation/arm/OMAP/omap_pm | 2 +- Documentation/block/cfq-iosched.txt | 2 +- Documentation/devicetree/bindings/arm/vexpress-sysreg.txt | 4 ++-- Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt | 2 +- Documentation/dma-buf-sharing.txt | 2 +- Documentation/fb/fbcon.txt | 2 +- Documentation/fb/viafb.txt | 2 +- Documentation/filesystems/ext4.txt | 2 +- Documentation/filesystems/nfs/pnfs.txt | 2 +- Documentation/filesystems/relay.txt | 2 +- Documentation/filesystems/sysfs-tagging.txt | 2 +- Documentation/i2c/upgrading-clients | 4 ++-- Documentation/rapidio/rapidio.txt | 2 +- Documentation/sound/alsa/compress_offload.txt | 2 +- Documentation/sysfs-rules.txt | 2 +- Documentation/virtual/kvm/api.txt | 2 +- Documentation/x86/boot.txt | 2 +- 17 files changed, 19 insertions(+), 19 deletions(-) diff --git a/Documentation/arm/OMAP/omap_pm b/Documentation/arm/OMAP/omap_pm index 9012bb039094..4ae915a9f899 100644 --- a/Documentation/arm/OMAP/omap_pm +++ b/Documentation/arm/OMAP/omap_pm @@ -78,7 +78,7 @@ to NULL. Drivers should use the following idiom: The most common usage of these functions will probably be to specify the maximum time from when an interrupt occurs, to when the device becomes accessible. To accomplish this, driver writers should use the -set_max_mpu_wakeup_lat() function to to constrain the MPU wakeup +set_max_mpu_wakeup_lat() function to constrain the MPU wakeup latency, and the set_max_dev_wakeup_lat() function to constrain the device wakeup latency (from clk_enable() to accessibility). For example, diff --git a/Documentation/block/cfq-iosched.txt b/Documentation/block/cfq-iosched.txt index 9887f0414c16..f3bc72945cbd 100644 --- a/Documentation/block/cfq-iosched.txt +++ b/Documentation/block/cfq-iosched.txt @@ -69,7 +69,7 @@ one, this value should be decreased relative to fifo_expire_async. group_idle ----------- This parameter forces idling at the CFQ group level instead of CFQ -queue level. This was introduced after after a bottleneck was observed +queue level. This was introduced after a bottleneck was observed in higher end storage due to idle on sequential queue and allow dispatch from a single queue. The idea with this parameter is that it can be run with slice_idle=0 and group_idle=8, so that idling does not happen on individual diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt index 9cf3f25544c7..5580e9c4bd85 100644 --- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt +++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt @@ -32,8 +32,8 @@ numbers - see motherboard's TRM for more details. The node describing a config device must refer to the sysreg node via "arm,vexpress,config-bridge" phandle (can be also defined in the node's parent) and relies on the board topology properties - see main vexpress -node documentation for more details. It must must also define the -following property: +node documentation for more details. It must also define the following +property: - arm,vexpress-sysreg,func : must contain two cells: - first cell defines function number (eg. 1 for clock generator, 2 for voltage regulators etc.) diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index 648d60eb9fd8..7ccae490ff6d 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -37,7 +37,7 @@ Bank: 3 (A, B and C) 0xffffffff 0x7fff3ccf /* pioB */ 0xffffffff 0x007fffff /* pioC */ -For each peripheral/bank we will descibe in a u32 if a pin can can be +For each peripheral/bank we will descibe in a u32 if a pin can be configured in it by putting 1 to the pin bit (1 << pin) Let's take the pioA on peripheral B diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt index 0b23261561d2..e31a2a9d2b07 100644 --- a/Documentation/dma-buf-sharing.txt +++ b/Documentation/dma-buf-sharing.txt @@ -321,7 +321,7 @@ Access to a dma_buf from the kernel context involves three steps: When the importer is done accessing the range specified in begin_cpu_access, it needs to announce this to the exporter (to facilitate cache flushing and - unpinning of any pinned resources). The result of of any dma_buf kmap calls + unpinning of any pinned resources). The result of any dma_buf kmap calls after end_cpu_access is undefined. Interface: diff --git a/Documentation/fb/fbcon.txt b/Documentation/fb/fbcon.txt index 99ea58e65eff..4a9739abc860 100644 --- a/Documentation/fb/fbcon.txt +++ b/Documentation/fb/fbcon.txt @@ -150,7 +150,7 @@ C. Boot options C. Attaching, Detaching and Unloading -Before going on on how to attach, detach and unload the framebuffer console, an +Before going on how to attach, detach and unload the framebuffer console, an illustration of the dependencies may help. The console layer, as with most subsystems, needs a driver that interfaces with diff --git a/Documentation/fb/viafb.txt b/Documentation/fb/viafb.txt index 444e34b52ae1..1cb2462a71ce 100644 --- a/Documentation/fb/viafb.txt +++ b/Documentation/fb/viafb.txt @@ -32,7 +32,7 @@ Start viafb with default settings: #modprobe viafb - Start viafb with with user options: + Start viafb with user options: #modprobe viafb viafb_mode=800x600 viafb_bpp=16 viafb_refresh=60 viafb_active_dev=CRT+DVI viafb_dvi_port=DVP1 viafb_mode1=1024x768 viafb_bpp=16 viafb_refresh1=60 diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index f7cbf574a875..a92c5aa8ce22 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -2,7 +2,7 @@ Ext4 Filesystem =============== -Ext4 is an an advanced level of the ext3 filesystem which incorporates +Ext4 is an advanced level of the ext3 filesystem which incorporates scalability and reliability enhancements for supporting large filesystems (64 bit) in keeping with increasing disk capacities and state-of-the-art feature requirements. diff --git a/Documentation/filesystems/nfs/pnfs.txt b/Documentation/filesystems/nfs/pnfs.txt index 52ae07f5f578..adc81a35fe2d 100644 --- a/Documentation/filesystems/nfs/pnfs.txt +++ b/Documentation/filesystems/nfs/pnfs.txt @@ -12,7 +12,7 @@ struct pnfs_layout_hdr ---------------------- The on-the-wire command LAYOUTGET corresponds to struct pnfs_layout_segment, usually referred to by the variable name lseg. -Each nfs_inode may hold a pointer to a cache of of these layout +Each nfs_inode may hold a pointer to a cache of these layout segments in nfsi->layout, of type struct pnfs_layout_hdr. We reference the header for the inode pointing to it, across each diff --git a/Documentation/filesystems/relay.txt b/Documentation/filesystems/relay.txt index 510b722667ac..33e2f3694733 100644 --- a/Documentation/filesystems/relay.txt +++ b/Documentation/filesystems/relay.txt @@ -31,7 +31,7 @@ Semantics Each relay channel has one buffer per CPU, each buffer has one or more sub-buffers. Messages are written to the first sub-buffer until it is -too full to contain a new message, in which case it it is written to +too full to contain a new message, in which case it is written to the next (if available). Messages are never split across sub-buffers. At this point, userspace can be notified so it empties the first sub-buffer, while the kernel continues writing to the next. diff --git a/Documentation/filesystems/sysfs-tagging.txt b/Documentation/filesystems/sysfs-tagging.txt index caaaf1266d8f..eb843e49c5a3 100644 --- a/Documentation/filesystems/sysfs-tagging.txt +++ b/Documentation/filesystems/sysfs-tagging.txt @@ -24,7 +24,7 @@ flag between KOBJ_NS_TYPE_NONE and KOBJ_NS_TYPES, and s_ns will point to the namespace to which it belongs. Each sysfs superblock's sysfs_super_info contains an array void -*ns[KOBJ_NS_TYPES]. When a a task in a tagging namespace +*ns[KOBJ_NS_TYPES]. When a task in a tagging namespace kobj_nstype first mounts sysfs, a new superblock is created. It will be differentiated from other sysfs mounts by having its s_fs_info->ns[kobj_nstype] set to the new namespace. Note that diff --git a/Documentation/i2c/upgrading-clients b/Documentation/i2c/upgrading-clients index d6991625c407..8e5fbd88c7d1 100644 --- a/Documentation/i2c/upgrading-clients +++ b/Documentation/i2c/upgrading-clients @@ -196,8 +196,8 @@ static int example_probe(struct i2c_client *i2c_client, Update the detach method, by changing the name to _remove and to delete the i2c_detach_client call. It is possible that you -can also remove the ret variable as it is not not needed for -any of the core functions. +can also remove the ret variable as it is not needed for any +of the core functions. - static int example_detach(struct i2c_client *client) + static int example_remove(struct i2c_client *client) diff --git a/Documentation/rapidio/rapidio.txt b/Documentation/rapidio/rapidio.txt index 717f5aa388b1..28fbd877f85a 100644 --- a/Documentation/rapidio/rapidio.txt +++ b/Documentation/rapidio/rapidio.txt @@ -300,7 +300,7 @@ initialization. ------------------------------------------- RapidIO subsystem code organization allows addition of new enumeration/discovery -methods as new configuration options without significant impact to to the core +methods as new configuration options without significant impact to the core RapidIO code. A new enumeration/discovery method has to be attached to one or more mport diff --git a/Documentation/sound/alsa/compress_offload.txt b/Documentation/sound/alsa/compress_offload.txt index 0bcc55155911..ac8d20b83322 100644 --- a/Documentation/sound/alsa/compress_offload.txt +++ b/Documentation/sound/alsa/compress_offload.txt @@ -73,7 +73,7 @@ The main requirements are: Design -The new API shares a number of concepts with with the PCM API for flow +The new API shares a number of concepts with the PCM API for flow control. Start, pause, resume, drain and stop commands have the same semantics no matter what the content is. diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt index c1a1fd636bf9..a5f985ee1822 100644 --- a/Documentation/sysfs-rules.txt +++ b/Documentation/sysfs-rules.txt @@ -47,7 +47,7 @@ versions of the sysfs interface. at device creation and removal - the unique key to the device at that point in time - the kernel's path to the device directory without the leading - /sys, and always starting with with a slash + /sys, and always starting with a slash - all elements of a devpath must be real directories. Symlinks pointing to /sys/devices must always be resolved to their real target and the target path must be used to access the device. diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index ef925eaa1460..858aecf21db2 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -53,7 +53,7 @@ incompatible change are allowed. However, there is an extension facility that allows backward-compatible extensions to the API to be queried and used. -The extension mechanism is not based on on the Linux version number. +The extension mechanism is not based on the Linux version number. Instead, kvm defines extension identifiers and a facility to query whether a particular extension identifier is available. If it is, a set of ioctls is available for application use. diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index fc66d42422ee..f4f268c2b826 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -58,7 +58,7 @@ Protocol 2.11: (Kernel 3.6) Added a field for offset of EFI handover protocol entry point. Protocol 2.12: (Kernel 3.8) Added the xloadflags field and extension fields - to struct boot_params for for loading bzImage and ramdisk + to struct boot_params for loading bzImage and ramdisk above 4G in 64bit. **** MEMORY LAYOUT -- cgit From 36019265cf81cdb2d366b28016bb00b936efc751 Mon Sep 17 00:00:00 2001 From: Yacine Belkadi Date: Wed, 24 Jul 2013 23:11:53 -0700 Subject: ktime: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(include/linux/ktime.h:75): No description found for return value of 'ktime_set' Fix them by using a "Return:" section to describe the return values. (Also apply some minor reformatting along the way.) Signed-off-by: Yacine Belkadi Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- include/linux/ktime.h | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/include/linux/ktime.h b/include/linux/ktime.h index debf208b7611..31c0cd1c941a 100644 --- a/include/linux/ktime.h +++ b/include/linux/ktime.h @@ -69,7 +69,7 @@ typedef union ktime ktime_t; /* Kill this */ * @secs: seconds to set * @nsecs: nanoseconds to set * - * Return the ktime_t representation of the value + * Return: The ktime_t representation of the value. */ static inline ktime_t ktime_set(const long secs, const unsigned long nsecs) { @@ -151,7 +151,7 @@ static inline ktime_t ktime_set(const long secs, const unsigned long nsecs) * @lhs: minuend * @rhs: subtrahend * - * Returns the remainder of the subtraction + * Return: The remainder of the subtraction. */ static inline ktime_t ktime_sub(const ktime_t lhs, const ktime_t rhs) { @@ -169,7 +169,7 @@ static inline ktime_t ktime_sub(const ktime_t lhs, const ktime_t rhs) * @add1: addend1 * @add2: addend2 * - * Returns the sum of @add1 and @add2. + * Return: The sum of @add1 and @add2. */ static inline ktime_t ktime_add(const ktime_t add1, const ktime_t add2) { @@ -195,7 +195,7 @@ static inline ktime_t ktime_add(const ktime_t add1, const ktime_t add2) * @kt: addend * @nsec: the scalar nsec value to add * - * Returns the sum of @kt and @nsec in ktime_t format + * Return: The sum of @kt and @nsec in ktime_t format. */ extern ktime_t ktime_add_ns(const ktime_t kt, u64 nsec); @@ -204,7 +204,7 @@ extern ktime_t ktime_add_ns(const ktime_t kt, u64 nsec); * @kt: minuend * @nsec: the scalar nsec value to subtract * - * Returns the subtraction of @nsec from @kt in ktime_t format + * Return: The subtraction of @nsec from @kt in ktime_t format. */ extern ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec); @@ -212,7 +212,7 @@ extern ktime_t ktime_sub_ns(const ktime_t kt, u64 nsec); * timespec_to_ktime - convert a timespec to ktime_t format * @ts: the timespec variable to convert * - * Returns a ktime_t variable with the converted timespec value + * Return: A ktime_t variable with the converted timespec value. */ static inline ktime_t timespec_to_ktime(const struct timespec ts) { @@ -224,7 +224,7 @@ static inline ktime_t timespec_to_ktime(const struct timespec ts) * timeval_to_ktime - convert a timeval to ktime_t format * @tv: the timeval variable to convert * - * Returns a ktime_t variable with the converted timeval value + * Return: A ktime_t variable with the converted timeval value. */ static inline ktime_t timeval_to_ktime(const struct timeval tv) { @@ -237,7 +237,7 @@ static inline ktime_t timeval_to_ktime(const struct timeval tv) * ktime_to_timespec - convert a ktime_t variable to timespec format * @kt: the ktime_t variable to convert * - * Returns the timespec representation of the ktime value + * Return: The timespec representation of the ktime value. */ static inline struct timespec ktime_to_timespec(const ktime_t kt) { @@ -249,7 +249,7 @@ static inline struct timespec ktime_to_timespec(const ktime_t kt) * ktime_to_timeval - convert a ktime_t variable to timeval format * @kt: the ktime_t variable to convert * - * Returns the timeval representation of the ktime value + * Return: The timeval representation of the ktime value. */ static inline struct timeval ktime_to_timeval(const ktime_t kt) { @@ -262,7 +262,7 @@ static inline struct timeval ktime_to_timeval(const ktime_t kt) * ktime_to_ns - convert a ktime_t variable to scalar nanoseconds * @kt: the ktime_t variable to convert * - * Returns the scalar nanoseconds representation of @kt + * Return: The scalar nanoseconds representation of @kt. */ static inline s64 ktime_to_ns(const ktime_t kt) { @@ -276,7 +276,9 @@ static inline s64 ktime_to_ns(const ktime_t kt) * @cmp1: comparable1 * @cmp2: comparable2 * - * Compare two ktime_t variables, returns 1 if equal + * Compare two ktime_t variables. + * + * Return: 1 if equal. */ static inline int ktime_equal(const ktime_t cmp1, const ktime_t cmp2) { @@ -288,7 +290,7 @@ static inline int ktime_equal(const ktime_t cmp1, const ktime_t cmp2) * @cmp1: comparable1 * @cmp2: comparable2 * - * Returns ... + * Return: ... * cmp1 < cmp2: return <0 * cmp1 == cmp2: return 0 * cmp1 > cmp2: return >0 @@ -342,7 +344,7 @@ extern ktime_t ktime_add_safe(const ktime_t lhs, const ktime_t rhs); * @kt: the ktime_t variable to convert * @ts: the timespec variable to store the result in * - * Returns true if there was a successful conversion, false if kt was 0. + * Return: %true if there was a successful conversion, %false if kt was 0. */ static inline __must_check bool ktime_to_timespec_cond(const ktime_t kt, struct timespec *ts) -- cgit From 297957b4a82f70d3bc6fbac7f6051ed0e5806f9b Mon Sep 17 00:00:00 2001 From: Martin Nordholts Date: Wed, 24 Jul 2013 23:17:34 -0700 Subject: Documentation: development-process: Update -mm and -next URLs Both old URLs are broken, so update them. Signed-off-by: Martin Nordholts Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/development-process/2.Process | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/development-process/2.Process b/Documentation/development-process/2.Process index 4823577c6509..2e0617936e8f 100644 --- a/Documentation/development-process/2.Process +++ b/Documentation/development-process/2.Process @@ -276,7 +276,7 @@ mainline get there via -mm. The current -mm patch is available in the "mmotm" (-mm of the moment) directory at: - http://userweb.kernel.org/~akpm/mmotm/ + http://www.ozlabs.org/~akpm/mmotm/ Use of the MMOTM tree is likely to be a frustrating experience, though; there is a definite chance that it will not even compile. @@ -287,7 +287,7 @@ the mainline is expected to look like after the next merge window closes. Linux-next trees are announced on the linux-kernel and linux-next mailing lists when they are assembled; they can be downloaded from: - http://www.kernel.org/pub/linux/kernel/people/sfr/linux-next/ + http://www.kernel.org/pub/linux/kernel/next/ Some information about linux-next has been gathered at: -- cgit From a24a4b9f3f7a4cfba3af0e8079e25972b88a5afa Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Tue, 30 Jul 2013 15:30:05 +0800 Subject: include/linux/coda.h: remove useless '#else' '#else' is useless, need remove. Signed-off-by: Chen Gang Signed-off-by: Jiri Kosina --- include/linux/coda.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/linux/coda.h b/include/linux/coda.h index cff544f81105..d30209b9cef8 100644 --- a/include/linux/coda.h +++ b/include/linux/coda.h @@ -60,7 +60,6 @@ Mellon the rights to redistribute these changes without encumbrance. #if defined(__linux__) typedef unsigned long long u_quad_t; -#else #endif #include #endif -- cgit From ccb7cc00774457ee0064c278a1bed4b9685364d3 Mon Sep 17 00:00:00 2001 From: Chris Cheney Date: Sun, 4 Aug 2013 22:37:42 -0500 Subject: credits: update contact information for Chris Cheney Small clean-up for my CREDITS entry. Signed-off-by: Chris Cheney Signed-off-by: Jiri Kosina --- CREDITS | 11 +++++------ drivers/media/usb/gspca/vicam.c | 2 +- 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/CREDITS b/CREDITS index 206d0fcf07a5..33a2f2d83009 100644 --- a/CREDITS +++ b/CREDITS @@ -637,14 +637,13 @@ S: 14509 NE 39th Street #1096 S: Bellevue, Washington 98007 S: USA -N: Christopher L. Cheney -E: ccheney@debian.org -E: ccheney@cheney.cx -W: http://www.cheney.cx +N: Chris Cheney +E: chris.cheney@gmail.com +E: ccheney@redhat.com P: 1024D/8E384AF2 2D31 1927 87D7 1F24 9FF9 1BC5 D106 5AB3 8E38 4AF2 D: Vista Imaging usb webcam driver -S: 314 Prince of Wales -S: Conroe, TX 77304 +S: 2308 Therrell Way +S: McKinney, TX 75070 S: USA N: Stuart Cheshire diff --git a/drivers/media/usb/gspca/vicam.c b/drivers/media/usb/gspca/vicam.c index d6890bc37198..a2275cfe0b81 100644 --- a/drivers/media/usb/gspca/vicam.c +++ b/drivers/media/usb/gspca/vicam.c @@ -6,7 +6,7 @@ * Based on the usbvideo vicam driver, which is: * * Copyright (c) 2002 Joe Burks (jburks@wavicle.org), - * Christopher L Cheney (ccheney@cheney.cx), + * Chris Cheney (chris.cheney@gmail.com), * Pavel Machek (pavel@ucw.cz), * John Tyner (jtyner@cs.ucr.edu), * Monroe Williams (monroe@pobox.com) -- cgit From fd1a190029cc29fadf14bb9a1e82767e80c6ebdb Mon Sep 17 00:00:00 2001 From: Cristian Stoica Date: Fri, 28 Jun 2013 15:56:20 +0300 Subject: crypto: fix typo in comment Signed-off-by: Cristian Stoica Signed-off-by: Jiri Kosina --- crypto/api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/crypto/api.c b/crypto/api.c index 3b6180336d3d..320ea4d8a0f5 100644 --- a/crypto/api.c +++ b/crypto/api.c @@ -391,7 +391,7 @@ EXPORT_SYMBOL_GPL(__crypto_alloc_tfm); * @mask: Mask for type comparison * * This function should not be used by new algorithm types. - * Plesae use crypto_alloc_tfm instead. + * Please use crypto_alloc_tfm instead. * * crypto_alloc_base() will first attempt to locate an already loaded * algorithm. If that fails and the kernel supports dynamically loadable -- cgit From 0a8df84e967e50fd910cb49411a50411fc6be169 Mon Sep 17 00:00:00 2001 From: Stefan Huber Date: Thu, 27 Jun 2013 12:54:44 +0200 Subject: Documentation/devicetree/bindings/net/can/ fix a typo Corrected the word compatbile to compatible in the file atmel-can.txt. Signed-off-by: Stefan Huber Signed-off-by: Matthias Schid Signed-off-by: Simon Puels Signed-off-by: Jiri Kosina --- Documentation/devicetree/bindings/net/can/atmel-can.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/can/atmel-can.txt b/Documentation/devicetree/bindings/net/can/atmel-can.txt index 72cf0c5daff4..14e52a0d86ec 100644 --- a/Documentation/devicetree/bindings/net/can/atmel-can.txt +++ b/Documentation/devicetree/bindings/net/can/atmel-can.txt @@ -8,7 +8,7 @@ Required properties: Example: can0: can@f000c000 { - compatbile = "atmel,at91sam9x5-can"; + compatible = "atmel,at91sam9x5-can"; reg = <0xf000c000 0x300>; interrupts = <40 4 5> }; -- cgit From 3999debeeeaec052fd2eb8b5482257fdb2ab6616 Mon Sep 17 00:00:00 2001 From: Stefan Huber Date: Thu, 27 Jun 2013 12:54:47 +0200 Subject: Documentation/devicetree/bindings/clock/ fix a typo Corrected the word osciallator to oscillator in the file st,nomadik.txt. Signed-off-by: Stefan Huber Signed-off-by: Matthias Schid Signed-off-by: Simon Puels Signed-off-by: Jiri Kosina --- Documentation/devicetree/bindings/clock/st,nomadik.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/clock/st,nomadik.txt b/Documentation/devicetree/bindings/clock/st,nomadik.txt index 7fc09773de46..40e0cf1f7b99 100644 --- a/Documentation/devicetree/bindings/clock/st,nomadik.txt +++ b/Documentation/devicetree/bindings/clock/st,nomadik.txt @@ -17,7 +17,7 @@ Optional properties for the SRC node: - disable-mxtal: if present this will disable the MXTALO, i.e. the driver output for the main (~19.2 MHz) chrystal, if the board has its own circuitry for providing this - osciallator + oscillator PLL nodes: these nodes represent the two PLLs on the system, -- cgit From 780d7bd4ebd50339a89c40ab9d9453c9f60c4f14 Mon Sep 17 00:00:00 2001 From: Stefan Huber Date: Thu, 27 Jun 2013 12:54:48 +0200 Subject: Documentation/hwmon/abituguru-datasheet fix a typo Corrected the word adventerous to adventurous. Signed-off-by: Stefan Huber Signed-off-by: Matthias Schid Signed-off-by: Simon Puels Signed-off-by: Jiri Kosina --- Documentation/hwmon/abituguru-datasheet | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/hwmon/abituguru-datasheet b/Documentation/hwmon/abituguru-datasheet index 8d2be8a0b1e3..86c0b1251c81 100644 --- a/Documentation/hwmon/abituguru-datasheet +++ b/Documentation/hwmon/abituguru-datasheet @@ -299,7 +299,7 @@ Byte 1: min threshold (scale as bank 0x26) -Warning for the adventerous +Warning for the adventurous =========================== A word of caution to those who want to experiment and see if they can figure -- cgit From 2d6674b8efdff36046e20085cefdc5b73b11f1eb Mon Sep 17 00:00:00 2001 From: Stefan Huber Date: Thu, 27 Jun 2013 12:54:52 +0200 Subject: Documentation/acpi/enumeration.txt fix a typo Corrected the word configation to configuration. Signed-off-by: Stefan Huber Signed-off-by: Matthias Schid Signed-off-by: Simon Puels Signed-off-by: Jiri Kosina --- Documentation/acpi/enumeration.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt index d9be7a97dff3..64139a189a4c 100644 --- a/Documentation/acpi/enumeration.txt +++ b/Documentation/acpi/enumeration.txt @@ -207,7 +207,7 @@ passing those. One idea is to return this in _DSM method like: Return (Local0) } -Then the at25 SPI driver can get this configation by calling _DSM on its +Then the at25 SPI driver can get this configuration by calling _DSM on its ACPI handle like: struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; -- cgit From 298a43965337b0ec7a2395a1e302d52f86c9c250 Mon Sep 17 00:00:00 2001 From: Stefan Huber Date: Thu, 27 Jun 2013 12:54:50 +0200 Subject: Documentation/sound/alsa/ fix a typo Corrected the word avarage to average in the file compress_offload.txt. Signed-off-by: Stefan Huber Signed-off-by: Matthias Schid Signed-off-by: Simon Puels Signed-off-by: Jiri Kosina --- Documentation/sound/alsa/compress_offload.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/sound/alsa/compress_offload.txt b/Documentation/sound/alsa/compress_offload.txt index ac8d20b83322..fd74ff26376e 100644 --- a/Documentation/sound/alsa/compress_offload.txt +++ b/Documentation/sound/alsa/compress_offload.txt @@ -130,7 +130,7 @@ the settings should remain the exception. The timestamp becomes a multiple field structure. It lists the number of bytes transferred, the number of samples processed and the number of samples rendered/grabbed. All these values can be used to determine -the avarage bitrate, figure out if the ring buffer needs to be +the average bitrate, figure out if the ring buffer needs to be refilled or the delay due to decoding/encoding/io on the DSP. Note that the list of codecs/profiles/modes was derived from the -- cgit From 772735c452346e950ea99fc6eb60590062d508cc Mon Sep 17 00:00:00 2001 From: Stefan Huber Date: Thu, 27 Jun 2013 12:54:53 +0200 Subject: Documentation/fb/viafb.modes fix a typo Corrected the word negtive to negative. Signed-off-by: Stefan Huber Signed-off-by: Matthias Schid Signed-off-by: Simon Puels Signed-off-by: Jiri Kosina --- Documentation/fb/viafb.modes | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/fb/viafb.modes b/Documentation/fb/viafb.modes index 02e5b487f00e..2a547da2e5cc 100644 --- a/Documentation/fb/viafb.modes +++ b/Documentation/fb/viafb.modes @@ -571,7 +571,7 @@ mode "640x480-60" # 160 chars 800 lines # Blank Time 4.798 us 0.564 ms # 50 chars 28 lines -# Polarity negtive positive +# Polarity negative positive # mode "1280x800-60" # D: 83.500 MHz, H: 49.702 kHz, V: 60.00 Hz -- cgit From c147be7c982356e15816323f3ebb577bd265a2ff Mon Sep 17 00:00:00 2001 From: Stefan Huber Date: Thu, 27 Jun 2013 12:54:51 +0200 Subject: Documentation/scsi/hptiop.txt fix a typo Corrected the word ponter to pointer. Signed-off-by: Stefan Huber Signed-off-by: Matthias Schid Signed-off-by: Simon Puels Signed-off-by: Jiri Kosina --- Documentation/scsi/hptiop.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/scsi/hptiop.txt b/Documentation/scsi/hptiop.txt index 4a4f47e759cd..12ecfd308e55 100644 --- a/Documentation/scsi/hptiop.txt +++ b/Documentation/scsi/hptiop.txt @@ -151,7 +151,7 @@ To send a request to the controller: generated. - The host read the outbound list copy pointer shadow register and compare - with previous saved read ponter N. If they are different, the host will + with previous saved read pointer N. If they are different, the host will read the (N+1)th outbound list unit. The host get the index of the request from the (N+1)th outbound list -- cgit From 7052a5c41d1f93b0b83c06b068052e589cb2eefd Mon Sep 17 00:00:00 2001 From: Stefan Huber Date: Thu, 27 Jun 2013 12:54:45 +0200 Subject: Documentation/devicetree/bindings/c6x/ fix a typo Corrected the word Configuraion to Configuration in the file dscr.txt. Signed-off-by: Stefan Huber Signed-off-by: Matthias Schid Signed-off-by: Simon Puels Signed-off-by: Jiri Kosina --- Documentation/devicetree/bindings/c6x/dscr.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/c6x/dscr.txt b/Documentation/devicetree/bindings/c6x/dscr.txt index d847758f2b20..b0e97144cfb1 100644 --- a/Documentation/devicetree/bindings/c6x/dscr.txt +++ b/Documentation/devicetree/bindings/c6x/dscr.txt @@ -5,7 +5,7 @@ TI C6X SoCs contain a region of miscellaneous registers which provide various function for SoC control or status. Details vary considerably among from SoC to SoC with no two being alike. -In general, the Device State Configuraion Registers (DSCR) will provide one or +In general, the Device State Configuration Registers (DSCR) will provide one or more configuration registers often protected by a lock register where one or more key values must be written to a lock register in order to unlock the configuration register for writes. These configuration register may be used to -- cgit From a15112eb604795fcb24ad19a7de9c7a8ee621120 Mon Sep 17 00:00:00 2001 From: Stefan Huber Date: Thu, 27 Jun 2013 12:54:54 +0200 Subject: Documentation/zh_CN/SubmittingPatches fix a typo Corrected the word MAITAINERS to MAINTAINERS. Signed-off-by: Stefan Huber Signed-off-by: Matthias Schid Signed-off-by: Simon Puels Signed-off-by: Jiri Kosina --- Documentation/zh_CN/SubmittingPatches | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/zh_CN/SubmittingPatches b/Documentation/zh_CN/SubmittingPatches index 0f4385a62a49..be0bd4725062 100644 --- a/Documentation/zh_CN/SubmittingPatches +++ b/Documentation/zh_CN/SubmittingPatches @@ -146,7 +146,7 @@ Majordomo lists of VGER.KERNEL.ORG at: 如果改动影响了用户空间和内核之间的接口，请给 MAN-PAGES 的维护者（列在 -MAITAINERS 文件里的）发送一个手册页（man-pages）补丁，或者至少通知一下改 +MAINTAINERS 文件里的）发送一个手册页（man-pages）补丁，或者至少通知一下改 变，让一些信息有途径进入手册页。 即使在第四步的时候，维护者没有作出回应，也要确认在修改他们的代码的时候 -- cgit From 8646603608e324b352b1797c6fd8024cb6728a31 Mon Sep 17 00:00:00 2001 From: Stefan Huber Date: Thu, 27 Jun 2013 12:54:46 +0200 Subject: Documentation/devicetree/bindings/serial/ fix a typo Corrected the word beteween to between in the file rs485.txt. Signed-off-by: Stefan Huber Signed-off-by: Matthias Schid Signed-off-by: Simon Puels Signed-off-by: Jiri Kosina --- Documentation/devicetree/bindings/serial/rs485.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt index 1e753c69fc83..32b1fa1f2a5b 100644 --- a/Documentation/devicetree/bindings/serial/rs485.txt +++ b/Documentation/devicetree/bindings/serial/rs485.txt @@ -7,7 +7,7 @@ UART node. Required properties: - rs485-rts-delay: prop-encoded-array where: - * a is the delay beteween rts signal and beginning of data sent in milliseconds. + * a is the delay between rts signal and beginning of data sent in milliseconds. it corresponds to the delay before sending data. * b is the delay between end of data sent and rts signal in milliseconds it corresponds to the delay after sending data and actual release of the line. -- cgit From 0b1587b18bfed2fc686abfca7b942d75f859c465 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Wed, 17 Jul 2013 04:37:44 +0900 Subject: treewide: Fix typo in printk Correct spelling typo in printk Signed-off-by: Masanari Iida Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- drivers/crypto/ux500/hash/hash_core.c | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 4 ++-- drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 2 +- drivers/net/wireless/cw1200/wsm.c | 2 +- drivers/net/wireless/iwlwifi/mvm/time-event.c | 2 +- drivers/net/wireless/rtlwifi/rtl8188ee/fw.c | 4 ++-- drivers/net/wireless/rtlwifi/rtl8723ae/fw.c | 4 ++-- drivers/power/88pm860x_charger.c | 4 ++-- drivers/power/pm2301_charger.c | 2 +- drivers/scsi/lpfc/lpfc_attr.c | 8 ++++---- drivers/scsi/qla2xxx/qla_mr.c | 2 +- 11 files changed, 18 insertions(+), 18 deletions(-) diff --git a/drivers/crypto/ux500/hash/hash_core.c b/drivers/crypto/ux500/hash/hash_core.c index 496ae6aae316..33693d966b6a 100644 --- a/drivers/crypto/ux500/hash/hash_core.c +++ b/drivers/crypto/ux500/hash/hash_core.c @@ -282,7 +282,7 @@ static int get_empty_message_digest( } } else { dev_dbg(device_data->dev, "[%s] Continue hash " - "calculation, since hmac key avalable", + "calculation, since hmac key available", __func__); } } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 0913c623a67e..3c51b774a65c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -1637,7 +1637,7 @@ int qlcnic_83xx_nic_set_promisc(struct qlcnic_adapter *adapter, u32 mode) err = qlcnic_issue_cmd(adapter, &cmd); if (err) dev_info(&adapter->pdev->dev, - "Promiscous mode config failed\n"); + "Promiscuous mode config failed\n"); qlcnic_free_mbx_args(&cmd); return err; @@ -3082,7 +3082,7 @@ int qlcnic_83xx_set_settings(struct qlcnic_adapter *adapter, status = qlcnic_83xx_set_port_config(adapter); if (status) { dev_info(&adapter->pdev->dev, - "Faild to Set Link Speed and autoneg.\n"); + "Failed to Set Link Speed and autoneg.\n"); adapter->ahw->port_config = config; } return status; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index d3f8797efcc3..2fe15c591b3a 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -1652,7 +1652,7 @@ static int qlcnic_83xx_process_rcv_ring(struct qlcnic_host_sds_ring *sds_ring, break; default: dev_info(&adapter->pdev->dev, - "Unkonwn opcode: 0x%x\n", opcode); + "Unknown opcode: 0x%x\n", opcode); goto skip; } diff --git a/drivers/net/wireless/cw1200/wsm.c b/drivers/net/wireless/cw1200/wsm.c index cbb74d7a9be5..9e0ca3048657 100644 --- a/drivers/net/wireless/cw1200/wsm.c +++ b/drivers/net/wireless/cw1200/wsm.c @@ -1199,7 +1199,7 @@ bool wsm_flush_tx(struct cw1200_common *priv) if (priv->bh_error) { /* In case of failure do not wait for magic. */ - pr_err("[WSM] Fatal error occured, will not flush TX.\n"); + pr_err("[WSM] Fatal error occurred, will not flush TX.\n"); return false; } else { /* Get a timestamp of "oldest" frame */ diff --git a/drivers/net/wireless/iwlwifi/mvm/time-event.c b/drivers/net/wireless/iwlwifi/mvm/time-event.c index ad9bbca99213..39b3ffbc53b0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/iwlwifi/mvm/time-event.c @@ -184,7 +184,7 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm, (!te_data->vif->bss_conf.assoc || !te_data->vif->bss_conf.dtim_period)) { IWL_ERR(mvm, - "No assocation and the time event is over already...\n"); + "No association and the time event is over already...\n"); ieee80211_connection_loss(te_data->vif); } diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/fw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/fw.c index 57e4cc5833a9..557bc5b8327e 100644 --- a/drivers/net/wireless/rtlwifi/rtl8188ee/fw.c +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/fw.c @@ -341,7 +341,7 @@ static void _rtl88e_fill_h2c_command(struct ieee80211_hw *hw, wait_h2c_limit--; if (wait_h2c_limit == 0) { RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, - "Wating too long for FW read " + "Waiting too long for FW read " "clear HMEBox(%d)!\n", boxnum); break; } @@ -351,7 +351,7 @@ static void _rtl88e_fill_h2c_command(struct ieee80211_hw *hw, isfw_read = _rtl88e_check_fw_read_last_h2c(hw, boxnum); u1b_tmp = rtl_read_byte(rtlpriv, 0x130); RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, - "Wating for FW read clear HMEBox(%d)!!! " + "Waiting for FW read clear HMEBox(%d)!!! " "0x130 = %2x\n", boxnum, u1b_tmp); } diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c index dedfa1ed3e02..ba1502b172a6 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/fw.c @@ -330,7 +330,7 @@ static void _rtl8723ae_fill_h2c_command(struct ieee80211_hw *hw, wait_h2c_limmit--; if (wait_h2c_limmit == 0) { RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, - "Wating too long for FW read clear HMEBox(%d)!\n", + "Waiting too long for FW read clear HMEBox(%d)!\n", boxnum); break; } @@ -340,7 +340,7 @@ static void _rtl8723ae_fill_h2c_command(struct ieee80211_hw *hw, isfw_rd = rtl8723ae_check_fw_read_last_h2c(hw, boxnum); u1tmp = rtl_read_byte(rtlpriv, 0x1BF); RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, - "Wating for FW read clear HMEBox(%d)!!! " + "Waiting for FW read clear HMEBox(%d)!!! " "0x1BF = %2x\n", boxnum, u1tmp); } diff --git a/drivers/power/88pm860x_charger.c b/drivers/power/88pm860x_charger.c index ffff66b1c1aa..de029bbc1cc1 100644 --- a/drivers/power/88pm860x_charger.c +++ b/drivers/power/88pm860x_charger.c @@ -554,7 +554,7 @@ static irqreturn_t pm860x_vchg_handler(int irq, void *data) OVTEMP_AUTORECOVER, OVTEMP_AUTORECOVER); dev_dbg(info->dev, - "%s, pm8606 over-temp occure\n", __func__); + "%s, pm8606 over-temp occurred\n", __func__); } } @@ -562,7 +562,7 @@ static irqreturn_t pm860x_vchg_handler(int irq, void *data) set_vchg_threshold(info, VCHG_OVP_LOW, 0); info->allowed = 0; dev_dbg(info->dev, - "%s,pm8607 over-vchg occure,vchg = %dmv\n", + "%s,pm8607 over-vchg occurred,vchg = %dmv\n", __func__, vchg); } else if (vchg < VCHG_OVP_LOW) { set_vchg_threshold(info, VCHG_NORMAL_LOW, diff --git a/drivers/power/pm2301_charger.c b/drivers/power/pm2301_charger.c index 1c0bfcbae062..ffa10ed83eb1 100644 --- a/drivers/power/pm2301_charger.c +++ b/drivers/power/pm2301_charger.c @@ -386,7 +386,7 @@ static int pm2_int_reg2(void *pm2_data, int val) if (val & (PM2XXX_INT3_ITCHPRECHARGEWD | PM2XXX_INT3_ITCHCCWD | PM2XXX_INT3_ITCHCVWD)) { dev_dbg(pm2->dev, - "Watchdog occured for precharge, CC and CV charge\n"); + "Watchdog occurred for precharge, CC and CV charge\n"); } return ret; diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 5cb08ae3e8c2..f4360c5ea6a9 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -818,7 +818,7 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr, * the readyness after performing a firmware reset. * * Returns: - * zero for success, -EPERM when port does not have privilage to perform the + * zero for success, -EPERM when port does not have privilege to perform the * reset, -EIO when port timeout from recovering from the reset. * * Note: @@ -835,7 +835,7 @@ lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *phba) lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr, &portstat_reg.word0); - /* verify if privilaged for the request operation */ + /* verify if privileged for the request operation */ if (!bf_get(lpfc_sliport_status_rn, &portstat_reg) && !bf_get(lpfc_sliport_status_err, &portstat_reg)) return -EPERM; @@ -927,9 +927,9 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) rc = lpfc_sli4_pdev_status_reg_wait(phba); if (rc == -EPERM) { - /* no privilage for reset */ + /* no privilege for reset */ lpfc_printf_log(phba, KERN_ERR, LOG_SLI, - "3150 No privilage to perform the requested " + "3150 No privilege to perform the requested " "access: x%x\n", reg_val); } else if (rc == -EIO) { /* reset failed, there is nothing more we can do */ diff --git a/drivers/scsi/qla2xxx/qla_mr.c b/drivers/scsi/qla2xxx/qla_mr.c index d7993797f46e..ab4be107cda1 100644 --- a/drivers/scsi/qla2xxx/qla_mr.c +++ b/drivers/scsi/qla2xxx/qla_mr.c @@ -1779,7 +1779,7 @@ qlafx00_fx_disc(scsi_qla_host_t *vha, fc_port_t *fcport, uint16_t fx_type) p_sysid = utsname(); if (!p_sysid) { ql_log(ql_log_warn, vha, 0x303c, - "Not able to get the system informtion\n"); + "Not able to get the system information\n"); goto done_free_sp; } break; -- cgit From 0dc5d4f708985a2724a1186b2a6b71b27aba5376 Mon Sep 17 00:00:00 2001 From: Michael Witten Date: Mon, 30 Apr 2012 17:21:51 +0000 Subject: Docs: Comment: Fixed egregious typos Signed-off-by: Michael Witten Signed-off-by: Jiri Kosina --- drivers/gpu/drm/radeon/r300.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index b9b776f1e582..d8dd269b9159 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -1541,7 +1541,7 @@ int r300_init(struct radeon_device *rdev) rdev->accel_working = true; r = r300_startup(rdev); if (r) { - /* Somethings want wront with the accel init stop accel */ + /* Something went wrong with the accel init, so stop accel */ dev_err(rdev->dev, "Disabling GPU acceleration\n"); r100_cp_fini(rdev); radeon_wb_fini(rdev); -- cgit From 548a1950f893c0a5b5458261622625c6a5fdc3e4 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 12 Aug 2013 19:55:49 -0400 Subject: Documentation: fix typo and update version in cachetlb.txt Fix a typo, and the reference to a proposed v2.7 kernel, as that in itself is dated. Signed-off-by: Paul Gortmaker Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/cachetlb.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/cachetlb.txt b/Documentation/cachetlb.txt index 9b728dc17535..d79b008e4a32 100644 --- a/Documentation/cachetlb.txt +++ b/Documentation/cachetlb.txt @@ -57,7 +57,7 @@ changes occur: interface must make sure that any previous page table modifications for the address space 'vma->vm_mm' in the range 'start' to 'end-1' will be visible to the cpu. That is, after - running, here will be no entries in the TLB for 'mm' for + running, there will be no entries in the TLB for 'mm' for virtual addresses in the range 'start' to 'end-1'. The "vma" is the backing store being used for the region. @@ -375,8 +375,8 @@ maps this page at its virtual address. void flush_icache_page(struct vm_area_struct *vma, struct page *page) All the functionality of flush_icache_page can be implemented in - flush_dcache_page and update_mmu_cache. In 2.7 the hope is to - remove this interface completely. + flush_dcache_page and update_mmu_cache. In the future, the hope + is to remove this interface completely. The final category of APIs is for I/O to deliberately aliased address ranges inside the kernel. Such aliases are set up by use of the -- cgit From c74499279bb0f4887a8faa9522160be8d7c7008d Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Tue, 13 Aug 2013 10:57:30 -0400 Subject: Documentation: remove reference to 2.7 kernel in early-userspace Signed-off-by: Paul Gortmaker Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/early-userspace/README | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/Documentation/early-userspace/README b/Documentation/early-userspace/README index 661a73fad399..93e63a9af30b 100644 --- a/Documentation/early-userspace/README +++ b/Documentation/early-userspace/README @@ -83,8 +83,7 @@ Where's this all leading? The klibc distribution contains some of the necessary software to make early userspace useful. The klibc distribution is currently -maintained separately from the kernel, but this may change early in -the 2.7 era (it missed the boat for 2.5). +maintained separately from the kernel. You can obtain somewhat infrequent snapshots of klibc from ftp://ftp.kernel.org/pub/linux/libs/klibc/ -- cgit From eb967b6a332688a8d83e7782953cc1017da514ff Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 9 Aug 2013 09:19:33 -0700 Subject: Documentation: leds: Fix a typo __initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Fix the example. Signed-off-by: Sachin Kamat Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/leds/leds-lm3556.txt | 2 +- Documentation/leds/leds-lp3944.txt | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/leds/leds-lm3556.txt b/Documentation/leds/leds-lm3556.txt index d9eb91b51913..62278e871b50 100644 --- a/Documentation/leds/leds-lm3556.txt +++ b/Documentation/leds/leds-lm3556.txt @@ -71,7 +71,7 @@ To register the chip at address 0x63 on specific adapter, set the platform data according to include/linux/platform_data/leds-lm3556.h, set the i2c board info Example: - static struct i2c_board_info __initdata board_i2c_ch4[] = { + static struct i2c_board_info board_i2c_ch4[] __initdata = { { I2C_BOARD_INFO(LM3556_NAME, 0x63), .platform_data = &lm3556_pdata, diff --git a/Documentation/leds/leds-lp3944.txt b/Documentation/leds/leds-lp3944.txt index c6eda18b15ef..e88ac3b60c08 100644 --- a/Documentation/leds/leds-lp3944.txt +++ b/Documentation/leds/leds-lp3944.txt @@ -37,7 +37,7 @@ registered using the i2c_board_info mechanism. To register the chip at address 0x60 on adapter 0, set the platform data according to include/linux/leds-lp3944.h, set the i2c board info: - static struct i2c_board_info __initdata a910_i2c_board_info[] = { + static struct i2c_board_info a910_i2c_board_info[] __initdata = { { I2C_BOARD_INFO("lp3944", 0x60), .platform_data = &a910_lp3944_leds, -- cgit From c96bd35036a7e20123984f20b546b4e4a19f3f51 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 9 Aug 2013 09:19:38 -0700 Subject: Documentation: pinctrl: Fix example code __initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Fix the examples. Signed-off-by: Sachin Kamat Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/pinctrl.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 052e13af2d38..e3f322a4b358 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -856,7 +856,7 @@ static unsigned long uart_sleep_mode[] = { PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0), }; -static struct pinctrl_map __initdata pinmap[] = { +static struct pinctrl_map pinmap[] __initdata = { PIN_MAP_MUX_GROUP("uart", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "u0_group", "u0"), PIN_MAP_CONFIGS_PIN("uart", PINCTRL_STATE_DEFAULT, "pinctrl-foo", @@ -951,7 +951,7 @@ Since the above construct is pretty common there is a helper macro to make it even more compact which assumes you want to use pinctrl-foo and position 0 for mapping, for example: -static struct pinctrl_map __initdata mapping[] = { +static struct pinctrl_map mapping[] __initdata = { PIN_MAP_MUX_GROUP("foo-i2c.o", PINCTRL_STATE_DEFAULT, "pinctrl-foo", NULL, "i2c0"), }; @@ -970,7 +970,7 @@ static unsigned long i2c_pin_configs[] = { FOO_SLEW_RATE_SLOW, }; -static struct pinctrl_map __initdata mapping[] = { +static struct pinctrl_map mapping[] __initdata = { PIN_MAP_MUX_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", "i2c0"), PIN_MAP_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs), PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs), @@ -984,7 +984,7 @@ order to explicitly indicate that the states were provided and intended to be empty. Table entry macro PIN_MAP_DUMMY_STATE serves the purpose of defining a named state without causing any pin controller to be programmed: -static struct pinctrl_map __initdata mapping[] = { +static struct pinctrl_map mapping[] __initdata = { PIN_MAP_DUMMY_STATE("foo-i2c.0", PINCTRL_STATE_DEFAULT), }; -- cgit From 5f5e39a152fb89e97253d5112df12d6a397beb2f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 9 Aug 2013 09:19:43 -0700 Subject: spi/documentation: Fix usage of __initdata __initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Fix the example code. Signed-off-by: Sachin Kamat Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/spi/spi-summary | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 2331eb214146..f21edb983413 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -215,7 +215,7 @@ So for example arch/.../mach-*/board-*.c files might have code like: /* if your mach-* infrastructure doesn't support kernels that can * run on multiple boards, pdata wouldn't benefit from "__init". */ - static struct mysoc_spi_data __initdata pdata = { ... }; + static struct mysoc_spi_data pdata __initdata = { ... }; static __init board_init(void) { -- cgit From 0ab943bf5624b2cbb63ce4fa870a7ab76bd732f6 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Wed, 31 Jul 2013 14:59:16 -0700 Subject: Documentation: replace strict_strtoul() with kstrtoul() The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han Signed-off-by: Jiri Kosina --- Documentation/target/tcm_mod_builder.py | 2 +- Documentation/trace/ftrace.txt | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py index 3fe0d812dcec..54d29c1320ed 100755 --- a/Documentation/target/tcm_mod_builder.py +++ b/Documentation/target/tcm_mod_builder.py @@ -300,7 +300,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " int ret;\n\n" buf += " if (strstr(name, \"tpgt_\") != name)\n" buf += " return ERR_PTR(-EINVAL);\n" - buf += " if (strict_strtoul(name + 5, 10, &tpgt) || tpgt > UINT_MAX)\n" + buf += " if (kstrtoul(name + 5, 10, &tpgt) || tpgt > UINT_MAX)\n" buf += " return ERR_PTR(-EINVAL);\n\n" buf += " tpg = kzalloc(sizeof(struct " + fabric_mod_name + "_tpg), GFP_KERNEL);\n" buf += " if (!tpg) {\n" diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index b937c6e2163c..ea2d35d64d26 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -735,7 +735,7 @@ Here are the available options: function as well as the function being traced. print-parent: - bash-4000 [01] 1477.606694: simple_strtoul <-strict_strtoul + bash-4000 [01] 1477.606694: simple_strtoul <-kstrtoul noprint-parent: bash-4000 [01] 1477.606694: simple_strtoul @@ -759,7 +759,7 @@ Here are the available options: latency-format option is enabled. bash 4000 1 0 00000000 00010a95 [58127d26] 1720.415ms \ - (+0.000ms): simple_strtoul (strict_strtoul) + (+0.000ms): simple_strtoul (kstrtoul) raw - This will display raw numbers. This option is best for use with user applications that can translate the raw -- cgit From 1a5d6d2b1792245bcfd93aa7225f114a27cc45d3 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 31 Jul 2013 14:59:10 -0700 Subject: docproc: Move printk file location > docproc: kernel/printk.c: No such file or directory So rename the file. Signed-off-by: Joe Perches Noticed-by: kbuild test robot Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/DocBook/device-drivers.tmpl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index cbfdf5486639..fe397f90a34f 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -84,7 +84,7 @@ X!Iinclude/linux/kobject.h Kernel utility functions !Iinclude/linux/kernel.h -!Ekernel/printk.c +!Ekernel/printk/printk.c !Ekernel/panic.c !Ekernel/sys.c !Ekernel/rcupdate.c -- cgit From d185af300fe43c130083851ca918ea2bb9600f0f Mon Sep 17 00:00:00 2001 From: Yacine Belkadi Date: Wed, 31 Jul 2013 14:59:24 -0700 Subject: workqueue: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(kernel/workqueue.c:653): No description found for return value of 'get_work_pool' Fix them by: - Using "Return:" sections to introduce descriptions of return values - Adding some missing descriptions Signed-off-by: Yacine Belkadi Signed-off-by: Jiri Kosina --- kernel/workqueue.c | 107 +++++++++++++++++++++++++++++++++-------------------- 1 file changed, 66 insertions(+), 41 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 0b72e816b8d0..7f01a3eeaf95 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -540,6 +540,8 @@ static int worker_pool_assign_id(struct worker_pool *pool) * This must be called either with pwq_lock held or sched RCU read locked. * If the pwq needs to be used beyond the locking in effect, the caller is * responsible for guaranteeing that the pwq stays online. + * + * Return: The unbound pool_workqueue for @node. */ static struct pool_workqueue *unbound_pwq_by_node(struct workqueue_struct *wq, int node) @@ -638,8 +640,6 @@ static struct pool_workqueue *get_work_pwq(struct work_struct *work) * get_work_pool - return the worker_pool a given work was associated with * @work: the work item of interest * - * Return the worker_pool @work was last associated with. %NULL if none. - * * Pools are created and destroyed under wq_pool_mutex, and allows read * access under sched-RCU read lock. As such, this function should be * called under wq_pool_mutex or with preemption disabled. @@ -648,6 +648,8 @@ static struct pool_workqueue *get_work_pwq(struct work_struct *work) * mentioned locking is in effect. If the returned pool needs to be used * beyond the critical section, the caller is responsible for ensuring the * returned pool is and stays online. + * + * Return: The worker_pool @work was last associated with. %NULL if none. */ static struct worker_pool *get_work_pool(struct work_struct *work) { @@ -671,7 +673,7 @@ static struct worker_pool *get_work_pool(struct work_struct *work) * get_work_pool_id - return the worker pool ID a given work is associated with * @work: the work item of interest * - * Return the worker_pool ID @work was last associated with. + * Return: The worker_pool ID @work was last associated with. * %WORK_OFFQ_POOL_NONE if none. */ static int get_work_pool_id(struct work_struct *work) @@ -830,7 +832,7 @@ void wq_worker_waking_up(struct task_struct *task, int cpu) * CONTEXT: * spin_lock_irq(rq->lock) * - * RETURNS: + * Return: * Worker task on @cpu to wake up, %NULL if none. */ struct task_struct *wq_worker_sleeping(struct task_struct *task, int cpu) @@ -965,8 +967,8 @@ static inline void worker_clr_flags(struct worker *worker, unsigned int flags) * CONTEXT: * spin_lock_irq(pool->lock). * - * RETURNS: - * Pointer to worker which is executing @work if found, NULL + * Return: + * Pointer to worker which is executing @work if found, %NULL * otherwise. */ static struct worker *find_worker_executing_work(struct worker_pool *pool, @@ -1154,14 +1156,16 @@ out_put: * @flags: place to store irq state * * Try to grab PENDING bit of @work. This function can handle @work in any - * stable state - idle, on timer or on worklist. Return values are + * stable state - idle, on timer or on worklist. * + * Return: * 1 if @work was pending and we successfully stole PENDING * 0 if @work was idle and we claimed PENDING * -EAGAIN if PENDING couldn't be grabbed at the moment, safe to busy-retry * -ENOENT if someone else is canceling @work, this state may persist * for arbitrarily long * + * Note: * On >= 0 return, the caller owns @work's PENDING bit. To avoid getting * interrupted while holding PENDING and @work off queue, irq must be * disabled on entry. This, combined with delayed_work->timer being @@ -1403,10 +1407,10 @@ retry: * @wq: workqueue to use * @work: work to queue * - * Returns %false if @work was already on a queue, %true otherwise. - * * We queue the work to a specific CPU, the caller must ensure it * can't go away. + * + * Return: %false if @work was already on a queue, %true otherwise. */ bool queue_work_on(int cpu, struct workqueue_struct *wq, struct work_struct *work) @@ -1476,7 +1480,7 @@ static void __queue_delayed_work(int cpu, struct workqueue_struct *wq, * @dwork: work to queue * @delay: number of jiffies to wait before queueing * - * Returns %false if @work was already on a queue, %true otherwise. If + * Return: %false if @work was already on a queue, %true otherwise. If * @delay is zero and @dwork is idle, it will be scheduled for immediate * execution. */ @@ -1512,7 +1516,7 @@ EXPORT_SYMBOL(queue_delayed_work_on); * zero, @work is guaranteed to be scheduled immediately regardless of its * current state. * - * Returns %false if @dwork was idle and queued, %true if @dwork was + * Return: %false if @dwork was idle and queued, %true if @dwork was * pending and its timer was modified. * * This function is safe to call from any context including IRQ handler. @@ -1627,7 +1631,7 @@ static void worker_leave_idle(struct worker *worker) * Might sleep. Called without any lock but returns with pool->lock * held. * - * RETURNS: + * Return: * %true if the associated pool is online (@worker is successfully * bound), %false if offline. */ @@ -1688,7 +1692,7 @@ static struct worker *alloc_worker(void) * CONTEXT: * Might sleep. Does GFP_KERNEL allocations. * - * RETURNS: + * Return: * Pointer to the newly created worker. */ static struct worker *create_worker(struct worker_pool *pool) @@ -1788,6 +1792,8 @@ static void start_worker(struct worker *worker) * @pool: the target pool * * Grab the managership of @pool and create and start a new worker for it. + * + * Return: 0 on success. A negative error code otherwise. */ static int create_and_start_worker(struct worker_pool *pool) { @@ -1932,7 +1938,7 @@ static void pool_mayday_timeout(unsigned long __pool) * multiple times. Does GFP_KERNEL allocations. Called only from * manager. * - * RETURNS: + * Return: * %false if no action was taken and pool->lock stayed locked, %true * otherwise. */ @@ -1989,7 +1995,7 @@ restart: * spin_lock_irq(pool->lock) which may be released and regrabbed * multiple times. Called only from manager. * - * RETURNS: + * Return: * %false if no action was taken and pool->lock stayed locked, %true * otherwise. */ @@ -2032,7 +2038,7 @@ static bool maybe_destroy_workers(struct worker_pool *pool) * spin_lock_irq(pool->lock) which may be released and regrabbed * multiple times. Does GFP_KERNEL allocations. * - * RETURNS: + * Return: * spin_lock_irq(pool->lock) which may be released and regrabbed * multiple times. Does GFP_KERNEL allocations. */ @@ -2246,6 +2252,8 @@ static void process_scheduled_works(struct worker *worker) * work items regardless of their specific target workqueue. The only * exception is work items which belong to workqueues with a rescuer which * will be explained in rescuer_thread(). + * + * Return: 0 */ static int worker_thread(void *__worker) { @@ -2344,6 +2352,8 @@ sleep: * those works so that forward progress can be guaranteed. * * This should happen rarely. + * + * Return: 0 */ static int rescuer_thread(void *__rescuer) { @@ -2516,7 +2526,7 @@ static void insert_wq_barrier(struct pool_workqueue *pwq, * CONTEXT: * mutex_lock(wq->mutex). * - * RETURNS: + * Return: * %true if @flush_color >= 0 and there's something to flush. %false * otherwise. */ @@ -2824,7 +2834,7 @@ already_gone: * Wait until @work has finished execution. @work is guaranteed to be idle * on return if it hasn't been requeued since flush started. * - * RETURNS: + * Return: * %true if flush_work() waited for the work to finish execution, * %false if it was already idle. */ @@ -2884,7 +2894,7 @@ static bool __cancel_work_timer(struct work_struct *work, bool is_dwork) * The caller must ensure that the workqueue on which @work was last * queued can't be destroyed before this function returns. * - * RETURNS: + * Return: * %true if @work was pending, %false otherwise. */ bool cancel_work_sync(struct work_struct *work) @@ -2901,7 +2911,7 @@ EXPORT_SYMBOL_GPL(cancel_work_sync); * immediate execution. Like flush_work(), this function only * considers the last queueing instance of @dwork. * - * RETURNS: + * Return: * %true if flush_work() waited for the work to finish execution, * %false if it was already idle. */ @@ -2919,11 +2929,15 @@ EXPORT_SYMBOL(flush_delayed_work); * cancel_delayed_work - cancel a delayed work * @dwork: delayed_work to cancel * - * Kill off a pending delayed_work. Returns %true if @dwork was pending - * and canceled; %false if wasn't pending. Note that the work callback - * function may still be running on return, unless it returns %true and the - * work doesn't re-arm itself. Explicitly flush or use - * cancel_delayed_work_sync() to wait on it. + * Kill off a pending delayed_work. + * + * Return: %true if @dwork was pending and canceled; %false if it wasn't + * pending. + * + * Note: + * The work callback function may still be running on return, unless + * it returns %true and the work doesn't re-arm itself. Explicitly flush or + * use cancel_delayed_work_sync() to wait on it. * * This function is safe to call from any context including IRQ handler. */ @@ -2952,7 +2966,7 @@ EXPORT_SYMBOL(cancel_delayed_work); * * This is cancel_work_sync() for delayed works. * - * RETURNS: + * Return: * %true if @dwork was pending, %false otherwise. */ bool cancel_delayed_work_sync(struct delayed_work *dwork) @@ -2969,7 +2983,7 @@ EXPORT_SYMBOL(cancel_delayed_work_sync); * system workqueue and blocks until all CPUs have completed. * schedule_on_each_cpu() is very slow. * - * RETURNS: + * Return: * 0 on success, -errno on failure. */ int schedule_on_each_cpu(work_func_t func) @@ -3037,7 +3051,7 @@ EXPORT_SYMBOL(flush_scheduled_work); * Executes the function immediately if process context is available, * otherwise schedules the function for delayed execution. * - * Returns: 0 - function was executed + * Return: 0 - function was executed * 1 - function was scheduled for execution */ int execute_in_process_context(work_func_t fn, struct execute_work *ew) @@ -3294,7 +3308,7 @@ static void wq_device_release(struct device *dev) * apply_workqueue_attrs() may race against userland updating the * attributes. * - * Returns 0 on success, -errno on failure. + * Return: 0 on success, -errno on failure. */ int workqueue_sysfs_register(struct workqueue_struct *wq) { @@ -3387,7 +3401,9 @@ void free_workqueue_attrs(struct workqueue_attrs *attrs) * @gfp_mask: allocation mask to use * * Allocate a new workqueue_attrs, initialize with default settings and - * return it. Returns NULL on failure. + * return it. + * + * Return: The allocated new workqueue_attr on success. %NULL on failure. */ struct workqueue_attrs *alloc_workqueue_attrs(gfp_t gfp_mask) { @@ -3440,7 +3456,8 @@ static bool wqattrs_equal(const struct workqueue_attrs *a, * @pool: worker_pool to initialize * * Initiailize a newly zalloc'd @pool. It also allocates @pool->attrs. - * Returns 0 on success, -errno on failure. Even on failure, all fields + * + * Return: 0 on success, -errno on failure. Even on failure, all fields * inside @pool proper are initialized and put_unbound_pool() can be called * on @pool safely to release it. */ @@ -3547,9 +3564,12 @@ static void put_unbound_pool(struct worker_pool *pool) * Obtain a worker_pool which has the same attributes as @attrs, bump the * reference count and return it. If there already is a matching * worker_pool, it will be used; otherwise, this function attempts to - * create a new one. On failure, returns NULL. + * create a new one. * * Should be called with wq_pool_mutex held. + * + * Return: On success, a worker_pool with the same attributes as @attrs. + * On failure, %NULL. */ static struct worker_pool *get_unbound_pool(const struct workqueue_attrs *attrs) { @@ -3779,9 +3799,7 @@ static void free_unbound_pwq(struct pool_workqueue *pwq) * * Calculate the cpumask a workqueue with @attrs should use on @node. If * @cpu_going_down is >= 0, that cpu is considered offline during - * calculation. The result is stored in @cpumask. This function returns - * %true if the resulting @cpumask is different from @attrs->cpumask, - * %false if equal. + * calculation. The result is stored in @cpumask. * * If NUMA affinity is not enabled, @attrs->cpumask is always used. If * enabled and @node has online CPUs requested by @attrs, the returned @@ -3790,6 +3808,9 @@ static void free_unbound_pwq(struct pool_workqueue *pwq) * * The caller is responsible for ensuring that the cpumask of @node stays * stable. + * + * Return: %true if the resulting @cpumask is different from @attrs->cpumask, + * %false if equal. */ static bool wq_calc_node_cpumask(const struct workqueue_attrs *attrs, int node, int cpu_going_down, cpumask_t *cpumask) @@ -3843,8 +3864,9 @@ static struct pool_workqueue *numa_pwq_tbl_install(struct workqueue_struct *wq, * items finish. Note that a work item which repeatedly requeues itself * back-to-back will stay on its current pwq. * - * Performs GFP_KERNEL allocations. Returns 0 on success and -errno on - * failure. + * Performs GFP_KERNEL allocations. + * + * Return: 0 on success and -errno on failure. */ int apply_workqueue_attrs(struct workqueue_struct *wq, const struct workqueue_attrs *attrs) @@ -4312,6 +4334,8 @@ EXPORT_SYMBOL_GPL(workqueue_set_max_active); * * Determine whether %current is a workqueue rescuer. Can be used from * work functions to determine whether it's being run off the rescuer task. + * + * Return: %true if %current is a workqueue rescuer. %false otherwise. */ bool current_is_workqueue_rescuer(void) { @@ -4335,7 +4359,7 @@ bool current_is_workqueue_rescuer(void) * workqueue being congested on one CPU doesn't mean the workqueue is also * contested on other CPUs / NUMA nodes. * - * RETURNS: + * Return: * %true if congested, %false otherwise. */ bool workqueue_congested(int cpu, struct workqueue_struct *wq) @@ -4368,7 +4392,7 @@ EXPORT_SYMBOL_GPL(workqueue_congested); * synchronization around this function and the test result is * unreliable and only useful as advisory hints or for debugging. * - * RETURNS: + * Return: * OR'd bitmask of WORK_BUSY_* bits. */ unsigned int work_busy(struct work_struct *work) @@ -4746,9 +4770,10 @@ static void work_for_cpu_fn(struct work_struct *work) * @fn: the function to run * @arg: the function arg * - * This will return the value @fn returns. * It is up to the caller to ensure that the cpu doesn't go offline. * The caller must not hold any locks which would prevent @fn from completing. + * + * Return: The value @fn returns. */ long work_on_cpu(int cpu, long (*fn)(void *), void *arg) { @@ -4813,7 +4838,7 @@ void freeze_workqueues_begin(void) * CONTEXT: * Grabs and releases wq_pool_mutex. * - * RETURNS: + * Return: * %true if some freezable workqueues are still busy. %false if freezing * is complete. */ -- cgit From ed7afeae24f9a3a52c677d776162f171e1ee9e12 Mon Sep 17 00:00:00 2001 From: Oleksandr Kravchenko Date: Wed, 31 Jul 2013 14:59:31 -0700 Subject: Documentation: devres: add IIO device alloc/free functions to list Add devm_iio_device_alloc() and devm_iio_device_free() functions to list of supported calls. Signed-off-by: Oleksandr Kravchenko Signed-off-by: Jiri Kosina --- Documentation/driver-model/devres.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index b4671459857f..1d3233292989 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -237,6 +237,10 @@ MEM devm_kzalloc() devm_kfree() +IIO + devm_iio_device_alloc() + devm_iio_device_free() + IO region devm_request_region() devm_request_mem_region() -- cgit From 0af5270324cc584629c197d9bfdf2c4ab3d81bd7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 31 Jul 2013 14:59:38 -0700 Subject: Documentation/SubmittingPatches: Request summaries for commit references Request inclusion of oneline summaries when referring to other commits Signed-off-by: Geert Uytterhoeven Signed-off-by: Jiri Kosina --- Documentation/SubmittingPatches | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 6e97e73d87b5..26b1e31d5a13 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -109,6 +109,16 @@ probably didn't even receive earlier versions of the patch. If the patch fixes a logged bug entry, refer to that bug entry by number and URL. +If you want to refer to a specific commit, don't just refer to the +SHA-1 ID of the commit. Please also include the oneline summary of +the commit, to make it easier for reviewers to know what it is about. +Example: + + Commit e21d2170f36602ae2708 ("video: remove unnecessary + platform_set_drvdata()") removed the unnecessary + platform_set_drvdata(), but left the variable "dev" unused, + delete it. + 3) Separate your changes. -- cgit From 03ddcbc5d80443c9e0cf1b263b68b4df9759af18 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 7 Aug 2013 21:22:20 +0200 Subject: spi/bitbang: trivial: fix doubled word "use" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Uwe Kleine-König Signed-off-by: Jiri Kosina --- drivers/spi/spi-bitbang.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index a63d7da3bfe2..1c2ba17760b8 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -40,7 +40,7 @@ * to glue code. These bitbang setup() and cleanup() routines are always * used, though maybe they're called from controller-aware code. * - * chipselect() and friends may use use spi_device->controller_data and + * chipselect() and friends may use spi_device->controller_data and * controller registers as appropriate. * * -- cgit From 884ad3f167f547cb7eafdaa69c2cae9c7771cf53 Mon Sep 17 00:00:00 2001 From: Hu Tao Date: Wed, 7 Aug 2013 22:51:09 -0700 Subject: doc: fix a typo about irq affinity smp_affinity holds bitmask and smp_affinity_list holds list. So we should write a list to smp_affinity_list, instead of smp_affinity. Signed-off-by: Hu Tao Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/IRQ-affinity.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/IRQ-affinity.txt b/Documentation/IRQ-affinity.txt index 7890fae18529..01a675175a36 100644 --- a/Documentation/IRQ-affinity.txt +++ b/Documentation/IRQ-affinity.txt @@ -57,8 +57,8 @@ i.e counters for the CPU0-3 did not change. Here is an example of limiting that same irq (44) to cpus 1024 to 1031: -[root@moon 44]# echo 1024-1031 > smp_affinity -[root@moon 44]# cat smp_affinity +[root@moon 44]# echo 1024-1031 > smp_affinity_list +[root@moon 44]# cat smp_affinity_list 1024-1031 Note that to do this with a bitmask would require 32 bitmasks of zero -- cgit From 85dbe706074c8b9091a3bc5f24eff02a044701c3 Mon Sep 17 00:00:00 2001 From: Tang Chen Date: Thu, 20 Jun 2013 18:10:19 +0800 Subject: page_isolation: Fix a comment typo in test_pages_isolated() pageblock_nr_page should be pageblock_nr_pages, and fist is a typo of first. Signed-off-by: Tang Chen Signed-off-by: Jiri Kosina --- mm/page_isolation.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/mm/page_isolation.c b/mm/page_isolation.c index 383bdbb98b04..0cee10ffb98d 100644 --- a/mm/page_isolation.c +++ b/mm/page_isolation.c @@ -226,9 +226,9 @@ int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn, int ret; /* - * Note: pageblock_nr_page != MAX_ORDER. Then, chunks of free page - * is not aligned to pageblock_nr_pages. - * Then we just check pagetype fist. + * Note: pageblock_nr_pages != MAX_ORDER. Then, chunks of free pages + * are not aligned to pageblock_nr_pages. + * Then we just check migratetype first. */ for (pfn = start_pfn; pfn < end_pfn; pfn += pageblock_nr_pages) { page = __first_valid_page(pfn, pageblock_nr_pages); @@ -238,7 +238,7 @@ int test_pages_isolated(unsigned long start_pfn, unsigned long end_pfn, page = __first_valid_page(start_pfn, end_pfn - start_pfn); if ((pfn < end_pfn) || !page) return -EBUSY; - /* Check all pages are free or Marked as ISOLATED */ + /* Check all pages are free or marked as ISOLATED */ zone = page_zone(page); spin_lock_irqsave(&zone->lock, flags); ret = __test_page_isolated_in_pageblock(start_pfn, end_pfn, -- cgit From 8be04b9374e59923fa337766aaa74151b95b7099 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 19 Jun 2013 12:15:53 -0700 Subject: treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks Don't emit OOM warnings when k.alloc calls fail when there there is a v.alloc immediately afterwards. Converted a kmalloc/vmalloc with memset to kzalloc/vzalloc. Signed-off-by: Joe Perches Acked-by: "Theodore Ts'o" Signed-off-by: Jiri Kosina --- drivers/block/drbd/drbd_bitmap.c | 2 +- drivers/infiniband/hw/ehca/ipz_pt_fn.c | 3 ++- drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c | 2 +- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 2 +- drivers/scsi/cxgbi/libcxgbi.h | 8 ++++---- fs/btrfs/send.c | 2 +- fs/ext4/super.c | 4 ++-- fs/gfs2/dir.c | 2 +- net/sched/sch_choke.c | 3 ++- 9 files changed, 15 insertions(+), 13 deletions(-) diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c index 64fbb8385cdc..b12c11ec4bd2 100644 --- a/drivers/block/drbd/drbd_bitmap.c +++ b/drivers/block/drbd/drbd_bitmap.c @@ -393,7 +393,7 @@ static struct page **bm_realloc_pages(struct drbd_bitmap *b, unsigned long want) * we must not block on IO to ourselves. * Context is receiver thread or dmsetup. */ bytes = sizeof(struct page *)*want; - new_pages = kzalloc(bytes, GFP_NOIO); + new_pages = kzalloc(bytes, GFP_NOIO | __GFP_NOWARN); if (!new_pages) { new_pages = __vmalloc(bytes, GFP_NOIO | __GFP_HIGHMEM | __GFP_ZERO, diff --git a/drivers/infiniband/hw/ehca/ipz_pt_fn.c b/drivers/infiniband/hw/ehca/ipz_pt_fn.c index 62c71fadb4d9..8d594517cd29 100644 --- a/drivers/infiniband/hw/ehca/ipz_pt_fn.c +++ b/drivers/infiniband/hw/ehca/ipz_pt_fn.c @@ -222,7 +222,8 @@ int ipz_queue_ctor(struct ehca_pd *pd, struct ipz_queue *queue, queue->small_page = NULL; /* allocate queue page pointers */ - queue->queue_pages = kzalloc(nr_of_pages * sizeof(void *), GFP_KERNEL); + queue->queue_pages = kzalloc(nr_of_pages * sizeof(void *), + GFP_KERNEL | __GFP_NOWARN); if (!queue->queue_pages) { queue->queue_pages = vzalloc(nr_of_pages * sizeof(void *)); if (!queue->queue_pages) { diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c index 4058b856eb71..76ae09999b5b 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c @@ -1157,7 +1157,7 @@ static void cxgb_redirect(struct dst_entry *old, struct dst_entry *new, */ void *cxgb_alloc_mem(unsigned long size) { - void *p = kzalloc(size, GFP_KERNEL); + void *p = kzalloc(size, GFP_KERNEL | __GFP_NOWARN); if (!p) p = vzalloc(size); diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c index 5a3256b083f2..5d5f2685ee2b 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c @@ -1133,7 +1133,7 @@ out: release_firmware(fw); */ void *t4_alloc_mem(size_t size) { - void *p = kzalloc(size, GFP_KERNEL); + void *p = kzalloc(size, GFP_KERNEL | __GFP_NOWARN); if (!p) p = vzalloc(size); diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h index 80fa99b3d384..8135f04671af 100644 --- a/drivers/scsi/cxgbi/libcxgbi.h +++ b/drivers/scsi/cxgbi/libcxgbi.h @@ -658,11 +658,11 @@ static inline u32 cxgbi_tag_nonrsvd_bits(struct cxgbi_tag_format *tformat, static inline void *cxgbi_alloc_big_mem(unsigned int size, gfp_t gfp) { - void *p = kmalloc(size, gfp); + void *p = kzalloc(size, gfp | __GFP_NOWARN); + if (!p) - p = vmalloc(size); - if (p) - memset(p, 0, size); + p = vzalloc(size); + return p; } diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c index d3f3b43cae0b..2e14fd89a8b4 100644 --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -219,7 +219,7 @@ static int fs_path_ensure_buf(struct fs_path *p, int len) len = PAGE_ALIGN(len); if (p->buf == p->inline_buf) { - tmp_buf = kmalloc(len, GFP_NOFS); + tmp_buf = kmalloc(len, GFP_NOFS | __GFP_NOWARN); if (!tmp_buf) { tmp_buf = vmalloc(len); if (!tmp_buf) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index bca26f34edf4..ffdfe385b029 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -162,7 +162,7 @@ void *ext4_kvmalloc(size_t size, gfp_t flags) { void *ret; - ret = kmalloc(size, flags); + ret = kmalloc(size, flags | __GFP_NOWARN); if (!ret) ret = __vmalloc(size, flags, PAGE_KERNEL); return ret; @@ -172,7 +172,7 @@ void *ext4_kvzalloc(size_t size, gfp_t flags) { void *ret; - ret = kzalloc(size, flags); + ret = kzalloc(size, flags | __GFP_NOWARN); if (!ret) ret = __vmalloc(size, flags | __GFP_ZERO, PAGE_KERNEL); return ret; diff --git a/fs/gfs2/dir.c b/fs/gfs2/dir.c index 0cb4c1557f20..2e5fc268d324 100644 --- a/fs/gfs2/dir.c +++ b/fs/gfs2/dir.c @@ -1859,7 +1859,7 @@ static int leaf_dealloc(struct gfs2_inode *dip, u32 index, u32 len, memset(&rlist, 0, sizeof(struct gfs2_rgrp_list)); - ht = kzalloc(size, GFP_NOFS); + ht = kzalloc(size, GFP_NOFS | __GFP_NOWARN); if (ht == NULL) ht = vzalloc(size); if (!ht) diff --git a/net/sched/sch_choke.c b/net/sched/sch_choke.c index ef53ab8d0aae..ddd73cb2d7ba 100644 --- a/net/sched/sch_choke.c +++ b/net/sched/sch_choke.c @@ -438,7 +438,8 @@ static int choke_change(struct Qdisc *sch, struct nlattr *opt) if (mask != q->tab_mask) { struct sk_buff **ntab; - ntab = kcalloc(mask + 1, sizeof(struct sk_buff *), GFP_KERNEL); + ntab = kcalloc(mask + 1, sizeof(struct sk_buff *), + GFP_KERNEL | __GFP_NOWARN); if (!ntab) ntab = vzalloc((mask + 1) * sizeof(struct sk_buff *)); if (!ntab) -- cgit From b615f4b3f962ffedb8d4a7122ca049abdb420547 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Wed, 29 May 2013 09:55:47 +0200 Subject: ppc: init_32: Fix error typo "CONFIG_START_KERNEL" Signed-off-by: Paul Bolle Signed-off-by: Jiri Kosina --- arch/powerpc/mm/init_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 01e2db97a210..d47d3dab4870 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -52,7 +52,7 @@ #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL) /* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */ #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET)) -#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL" +#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_KERNEL_START" #endif #endif #define MAX_LOW_MEM CONFIG_LOWMEM_SIZE -- cgit From 3948ff8bba6c09baf1a4722d4021139a5044ae45 Mon Sep 17 00:00:00 2001 From: Matthias Schid Date: Wed, 26 Jun 2013 16:25:53 +0200 Subject: scsi/megaraid fixed several typos in comments Fixed several typos in comments in megaraid_mbox.c, megaraid_mm.c and megaraid_sas_fusion.h. Signed-off-by: Matthias Schid Signed-off-by: Stefan Huber Signed-off-by: Simon Puels Signed-off-by: Jiri Kosina --- drivers/scsi/megaraid/megaraid_mbox.c | 10 +++++----- drivers/scsi/megaraid/megaraid_mm.c | 2 +- drivers/scsi/megaraid/megaraid_sas_fusion.h | 2 +- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c index e6a1e0b38a19..515c9629e9fe 100644 --- a/drivers/scsi/megaraid/megaraid_mbox.c +++ b/drivers/scsi/megaraid/megaraid_mbox.c @@ -549,7 +549,7 @@ out_probe_one: /** * megaraid_detach_one - release framework resources and call LLD release routine - * @pdev : handle for our PCI cofiguration space + * @pdev : handle for our PCI configuration space * * This routine is called during driver unload. We free all the allocated * resources and call the corresponding LLD so that it can also release all @@ -979,7 +979,7 @@ megaraid_fini_mbox(adapter_t *adapter) * @adapter : soft state of the raid controller * * Allocate and align the shared mailbox. This maibox is used to issue - * all the commands. For IO based controllers, the mailbox is also regsitered + * all the commands. For IO based controllers, the mailbox is also registered * with the FW. Allocate memory for all commands as well. * This is our big allocator. */ @@ -2027,7 +2027,7 @@ megaraid_mbox_prepare_pthru(adapter_t *adapter, scb_t *scb, * @scb : scsi control block * @scp : scsi command from the mid-layer * - * Prepare a command for the scsi physical devices. This rountine prepares + * Prepare a command for the scsi physical devices. This routine prepares * commands for devices which can take extended CDBs (>10 bytes). */ static void @@ -2586,7 +2586,7 @@ megaraid_abort_handler(struct scsi_cmnd *scp) } /** - * megaraid_reset_handler - device reset hadler for mailbox based driver + * megaraid_reset_handler - device reset handler for mailbox based driver * @scp : reference command * * Reset handler for the mailbox based controller. First try to find out if @@ -3446,7 +3446,7 @@ megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb) * megaraid_mbox_setup_device_map - manage device ids * @adapter : Driver's soft state * - * Manange the device ids to have an appropriate mapping between the kernel + * Manage the device ids to have an appropriate mapping between the kernel * scsi addresses and megaraid scsi and logical drive addresses. We export * scsi devices on their actual addresses, whereas the logical drives are * exported on a virtual scsi channel. diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c index 25506c777381..dfffd0f37916 100644 --- a/drivers/scsi/megaraid/megaraid_mm.c +++ b/drivers/scsi/megaraid/megaraid_mm.c @@ -896,7 +896,7 @@ hinfo_to_cinfo(mraid_hba_info_t *hinfo, mcontroller_t *cinfo) /** * mraid_mm_register_adp - Registration routine for low level drivers - * @lld_adp : Adapter objejct + * @lld_adp : Adapter object */ int mraid_mm_register_adp(mraid_mmadp_t *lld_adp) diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h index 12ff01cf6799..4eb84011cb07 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.h +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h @@ -88,7 +88,7 @@ enum MR_RAID_FLAGS_IO_SUB_TYPE { #define MEGASAS_FUSION_IN_RESET 0 /* - * Raid Context structure which describes MegaRAID specific IO Paramenters + * Raid Context structure which describes MegaRAID specific IO Parameters * This resides at offset 0x60 where the SGL normally starts in MPT IO Frames */ -- cgit From 9ed354b732689c9dbff6820ce57196e7e499c1fc Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Tue, 20 Aug 2013 20:33:17 +0900 Subject: doc: filesystems : Fix typo in Documentations/filesystems Correct spelling typo in Documentations/filesystems. Signed-off-by: Masanari Iida Acked-by: Randy Dunlap Signed-off-by: Jiri Kosina --- Documentation/filesystems/btrfs.txt | 2 +- Documentation/filesystems/nfs/Exporting | 2 +- Documentation/filesystems/qnx6.txt | 2 +- Documentation/filesystems/xfs.txt | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/filesystems/btrfs.txt b/Documentation/filesystems/btrfs.txt index b349d57b76ea..9dae59407437 100644 --- a/Documentation/filesystems/btrfs.txt +++ b/Documentation/filesystems/btrfs.txt @@ -87,7 +87,7 @@ Unless otherwise specified, all options default to off. device= Specify a device during mount so that ioctls on the control device - can be avoided. Especialy useful when trying to mount a multi-device + can be avoided. Especially useful when trying to mount a multi-device setup as root. May be specified multiple times for multiple devices. discard diff --git a/Documentation/filesystems/nfs/Exporting b/Documentation/filesystems/nfs/Exporting index 09994c247289..e543b1a619cc 100644 --- a/Documentation/filesystems/nfs/Exporting +++ b/Documentation/filesystems/nfs/Exporting @@ -93,7 +93,7 @@ For a filesystem to be exportable it must: 2/ make sure that d_splice_alias is used rather than d_add when ->lookup finds an inode for a given parent and name. - If inode is NULL, d_splice_alias(inode, dentry) is eqivalent to + If inode is NULL, d_splice_alias(inode, dentry) is equivalent to d_add(dentry, inode), NULL diff --git a/Documentation/filesystems/qnx6.txt b/Documentation/filesystems/qnx6.txt index 99e90184a72f..408679789136 100644 --- a/Documentation/filesystems/qnx6.txt +++ b/Documentation/filesystems/qnx6.txt @@ -149,7 +149,7 @@ Bitmap system area ------------------ The bitmap itself is divided into three parts. -First the system area, that is split into two halfs. +First the system area, that is split into two halves. Then userspace. The requirement for a static, fixed preallocated system area comes from how diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt index 12525b17d9ed..5be51fd888bd 100644 --- a/Documentation/filesystems/xfs.txt +++ b/Documentation/filesystems/xfs.txt @@ -135,7 +135,7 @@ default behaviour. If the memory cost of 8 log buffers is too high on small systems, then it may be reduced at some cost to performance on metadata intensive workloads. The logbsize option below - controls the size of each buffer and so is also relevent to + controls the size of each buffer and so is also relevant to this case. logbsize=value -- cgit From 1c93669929f0f52e7033c6529274dce8cc46a9a1 Mon Sep 17 00:00:00 2001 From: Sebastian Capella Date: Mon, 26 Aug 2013 14:54:49 -0700 Subject: PM / Hibernate: add section for resume options Expand the existing documentation to explicitly list the options for resuming a hibernation image, including the manual resume option which can be used from the initrd or initramfs and the kernel init resume. Signed-off-by: Sebastian Capella Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/power/swsusp.txt | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index 0b4b63e7e9b6..079160e22bcc 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -50,6 +50,19 @@ echo N > /sys/power/image_size before suspend (it is limited to 500 MB by default). +. The resume process checks for the presence of the resume device, +if found, it then checks the contents for the hibernation image signature. +If both are found, it resumes the hibernation image. + +. The resume process may be triggered in two ways: + 1) During lateinit: If resume=/dev/your_swap_partition is specified on + the kernel command line, lateinit runs the resume process. If the + resume device has not been probed yet, the resume process fails and + bootup continues. + 2) Manually from an initrd or initramfs: May be run from + the init script by using the /sys/power/resume file. It is vital + that this be done prior to remounting any filesystems (even as + read-only) otherwise data may be corrupted. Article about goals and implementation of Software Suspend for Linux ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -326,7 +339,7 @@ Q: How can distributions ship a swsusp-supporting kernel with modular disk drivers (especially SATA)? A: Well, it can be done, load the drivers, then do echo into -/sys/power/disk/resume file from initrd. Be sure not to mount +/sys/power/resume file from initrd. Be sure not to mount anything, not even read-only mount, or you are going to lose your data. -- cgit From 6c1b06d6f6b39622b5f9899acc77b9af76ebcb92 Mon Sep 17 00:00:00 2001 From: Xishi Qiu Date: Mon, 26 Aug 2013 14:54:54 -0700 Subject: doc: documentation/hwspinlock.txt fix typo Fix a trivial typo in Documentation/hwspinlock.txt Signed-off-by: Xishi Qiu Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/hwspinlock.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/hwspinlock.txt b/Documentation/hwspinlock.txt index a903ee5e9776..62f7d4ea6e26 100644 --- a/Documentation/hwspinlock.txt +++ b/Documentation/hwspinlock.txt @@ -241,7 +241,7 @@ int hwspinlock_example2(void) locks). Should be called from a process context (this function might sleep). Returns the address of hwspinlock on success, or NULL on error (e.g. - if the hwspinlock is sill in use). + if the hwspinlock is still in use). 5. Important structs -- cgit From cb18c5e2ed48d9fbbe863c7d80f84d1964d883a3 Mon Sep 17 00:00:00 2001 From: Libin Date: Mon, 26 Aug 2013 14:54:59 -0700 Subject: Documentation/kmemcheck: update kmemcheck documentation Kmemcheck configuration menu location correction in Documentation/ kmemcheck.txt Signed-off-by: Libin Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/kmemcheck.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/kmemcheck.txt b/Documentation/kmemcheck.txt index c28f82895d6b..9398a501fdb9 100644 --- a/Documentation/kmemcheck.txt +++ b/Documentation/kmemcheck.txt @@ -91,9 +91,9 @@ information from the kmemcheck warnings, which is extremely valuable in debugging a problem. This option is not mandatory, however, because it slows down the compilation process and produces a much bigger kernel image. -Now the kmemcheck menu should be visible (under "Kernel hacking" / "kmemcheck: -trap use of uninitialized memory"). Here follows a description of the -kmemcheck configuration variables: +Now the kmemcheck menu should be visible (under "Kernel hacking" / "Memory +Debugging" / "kmemcheck: trap use of uninitialized memory"). Here follows +a description of the kmemcheck configuration variables: o CONFIG_KMEMCHECK -- cgit From 51d8a7b0a04effbb67fd9afcda4757b0c061fc11 Mon Sep 17 00:00:00 2001 From: "Bernhard M. Wiedemann" Date: Mon, 26 Aug 2013 14:55:44 -0700 Subject: zram: doc fixes Simple doc updates to zram documentation. Signed-off-by: Bernhard M. Wiedemann Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/ABI/testing/sysfs-block-zram | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram index ec93fe33baa6..3f0b9ae61d8c 100644 --- a/Documentation/ABI/testing/sysfs-block-zram +++ b/Documentation/ABI/testing/sysfs-block-zram @@ -5,20 +5,21 @@ Description: The disksize file is read-write and specifies the disk size which represents the limit on the *uncompressed* worth of data that can be stored in this disk. + Unit: bytes What: /sys/block/zram/initstate Date: August 2010 Contact: Nitin Gupta Description: - The disksize file is read-only and shows the initialization + The initstate file is read-only and shows the initialization state of the device. What: /sys/block/zram/reset Date: August 2010 Contact: Nitin Gupta Description: - The disksize file is write-only and allows resetting the - device. The reset operation frees all the memory assocaited + The reset file is write-only and allows resetting the + device. The reset operation frees all the memory associated with this device. What: /sys/block/zram/num_reads @@ -48,7 +49,7 @@ Contact: Nitin Gupta Description: The notify_free file is read-only and specifies the number of swap slot free notifications received by this device. These - notifications are send to a swap block device when a swap slot + notifications are sent to a swap block device when a swap slot is freed. This statistic is applicable only when this disk is being used as a swap disk. -- cgit From 8e33a52fadddcfc9f85594a7ab4802c60ee0046a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 25 Jul 2013 11:53:25 -0700 Subject: treewide: Fix printks with 0x%# Using 0x%# emits 0x0x. Only one is necessary. Signed-off-by: Joe Perches Acked-by: Takashi Iwai Signed-off-by: Jiri Kosina --- arch/parisc/kernel/signal.c | 2 +- drivers/clocksource/acpi_pm.c | 4 ++-- drivers/net/ethernet/sis/sis900.c | 2 +- mm/memory-failure.c | 2 +- sound/pci/ens1370.c | 2 +- sound/pci/via82xx.c | 2 +- 6 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 940188d1942c..35c5bf1307aa 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -85,7 +85,7 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs) err |= __copy_from_user(regs->iaoq, sc->sc_iaoq, sizeof(regs->iaoq)); err |= __copy_from_user(regs->iasq, sc->sc_iasq, sizeof(regs->iasq)); err |= __get_user(regs->sar, &sc->sc_sar); - DBG(2,"restore_sigcontext: iaoq is 0x%#lx / 0x%#lx\n", + DBG(2,"restore_sigcontext: iaoq is %#lx / %#lx\n", regs->iaoq[0],regs->iaoq[1]); DBG(2,"restore_sigcontext: r28 is %ld\n", regs->gr[28]); return err; diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c index 6efe4d1ab3aa..6eab88985670 100644 --- a/drivers/clocksource/acpi_pm.c +++ b/drivers/clocksource/acpi_pm.c @@ -200,14 +200,14 @@ static int __init init_acpi_pm_clocksource(void) if ((value2 < value1) && ((value2) < 0xFFF)) break; printk(KERN_INFO "PM-Timer had inconsistent results:" - " 0x%#llx, 0x%#llx - aborting.\n", + " %#llx, %#llx - aborting.\n", value1, value2); pmtmr_ioport = 0; return -EINVAL; } if (i == ACPI_PM_READ_CHECKS) { printk(KERN_INFO "PM-Timer failed consistency check " - " (0x%#llx) - aborting.\n", value1); + " (%#llx) - aborting.\n", value1); pmtmr_ioport = 0; return -ENODEV; } diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c index eb4aea3fe793..6c1e34cd8ae5 100644 --- a/drivers/net/ethernet/sis/sis900.c +++ b/drivers/net/ethernet/sis/sis900.c @@ -1723,7 +1723,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance) if(netif_msg_intr(sis_priv)) printk(KERN_DEBUG "%s: exiting interrupt, " - "interrupt status = 0x%#8.8x.\n", + "interrupt status = %#8.8x\n", net_dev->name, sr32(isr)); spin_unlock (&sis_priv->lock); diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 2c13aa7a0164..b6fefcf13cba 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1265,7 +1265,7 @@ void memory_failure_queue(unsigned long pfn, int trapno, int flags) if (kfifo_put(&mf_cpu->fifo, &entry)) schedule_work_on(smp_processor_id(), &mf_cpu->work); else - pr_err("Memory failure: buffer overflow when queuing memory failure at 0x%#lx\n", + pr_err("Memory failure: buffer overflow when queuing memory failure at %#lx\n", pfn); spin_unlock_irqrestore(&mf_cpu->lock, proc_flags); put_cpu_var(memory_failure_cpu); diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c index ca8929b9a5d6..61262f396004 100644 --- a/sound/pci/ens1370.c +++ b/sound/pci/ens1370.c @@ -1842,7 +1842,7 @@ static int snd_ensoniq_create_gameport(struct ensoniq *ensoniq, int dev) default: if (!request_region(io_port, 8, "ens137x: gameport")) { - printk(KERN_WARNING "ens137x: gameport io port 0x%#x in use\n", + printk(KERN_WARNING "ens137x: gameport io port %#x in use\n", io_port); return -EBUSY; } diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 3c511d0caf9e..5ae6f042c586 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -1940,7 +1940,7 @@ static int snd_via686_create_gameport(struct via82xx *chip, unsigned char *legac r = request_region(JOYSTICK_ADDR, 8, "VIA686 gameport"); if (!r) { - printk(KERN_WARNING "via82xx: cannot reserve joystick port 0x%#x\n", + printk(KERN_WARNING "via82xx: cannot reserve joystick port %#x\n", JOYSTICK_ADDR); return -EBUSY; } -- cgit From ac20ad14c3bdb9ed2c43ae16fd949ede9c339502 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Tue, 20 Aug 2013 05:53:49 -0700 Subject: doc: Fix typo "is is" in Documentations Fix double words "is is" in Documentations. Signed-off-by: Masanari Iida Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/DocBook/media/v4l/vidioc-g-parm.xml | 4 ++-- Documentation/fmc/carrier.txt | 2 +- Documentation/hwmon/submitting-patches | 2 +- Documentation/mtd/nand_ecc.txt | 2 +- Documentation/sound/alsa/README.maya44 | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml index 9058224d1bbf..f4e28e7d4751 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml @@ -132,7 +132,7 @@ devices. &v4l2-fract; timeperframe - This is is the desired period between + This is the desired period between successive frames captured by the driver, in seconds. The field is intended to skip frames on the driver side, saving I/O bandwidth.Applications store here the desired frame @@ -193,7 +193,7 @@ applications must set the array to zero. &v4l2-fract; timeperframe - This is is the desired period between + This is the desired period between successive frames output by the driver, in seconds. diff --git a/Documentation/fmc/carrier.txt b/Documentation/fmc/carrier.txt index 173f6d65c88d..5e4f1dd3e98b 100644 --- a/Documentation/fmc/carrier.txt +++ b/Documentation/fmc/carrier.txt @@ -213,7 +213,7 @@ The individual methods perform the following tasks: methods: for example the SPEC driver may define that its carrier I2C memory is seen at offset 1M and the internal SPI flash is seen at offset 16M. This multiplexing of several flash memories in the - same address space is is carrier-specific and should only be used + same address space is carrier-specific and should only be used by a driver that has verified the `carrier_name' field. diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches index 46286460462b..3d1bac399a22 100644 --- a/Documentation/hwmon/submitting-patches +++ b/Documentation/hwmon/submitting-patches @@ -1,7 +1,7 @@ How to Get Your Patch Accepted Into the Hwmon Subsystem ------------------------------------------------------- -This text is is a collection of suggestions for people writing patches or +This text is a collection of suggestions for people writing patches or drivers for the hwmon subsystem. Following these suggestions will greatly increase the chances of your change being accepted. diff --git a/Documentation/mtd/nand_ecc.txt b/Documentation/mtd/nand_ecc.txt index 990efd7a9818..e129b2479ea8 100644 --- a/Documentation/mtd/nand_ecc.txt +++ b/Documentation/mtd/nand_ecc.txt @@ -543,7 +543,7 @@ THe code within the for loop was changed to: } As you can see tmppar is used to accumulate the parity within a for -iteration. In the last 3 statements is is added to par and, if needed, +iteration. In the last 3 statements is added to par and, if needed, to rp12 and rp14. While making the changes I also found that I could exploit that tmppar diff --git a/Documentation/sound/alsa/README.maya44 b/Documentation/sound/alsa/README.maya44 index 0e41576fa13e..67b2ea1cc31d 100644 --- a/Documentation/sound/alsa/README.maya44 +++ b/Documentation/sound/alsa/README.maya44 @@ -120,7 +120,7 @@ Mic Phantom+48V: switch for +48V phantom power for electrostatic microphones on Make sure this is not turned on while any other source is connected to input 1/2. It might damage the source and/or the maya44 card. -Mic/Line input: if switch is is on, input jack 1/2 is microphone input (mono), otherwise line input (stereo). +Mic/Line input: if switch is on, input jack 1/2 is microphone input (mono), otherwise line input (stereo). Bypass: analogue bypass from ADC input to output for channel 1+2. Same as "Monitor" in the windows driver. Bypass 1: same for channel 3+4. -- cgit From 2a7930bd77fee02ec1dd83f6024cef92aecbf8c7 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 20 Aug 2013 14:07:23 -0700 Subject: Documentation/printk-formats.txt: No casts needed for u64/s64 Now all 64-bit architectures have been converted to int-ll64.h in kernel space, casting to (unsigned) long long is no longer needed when formatting u64/s64. For backwards compatibility, alpha, ia64, mips64, and powerpc64 still use int-l64.h in userspace. Signed-off-by: Geert Uytterhoeven Acked-by: Randy Dunlap Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/printk-formats.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 22b4bc51fb4f..44fc924ad008 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -185,11 +185,11 @@ struct va_format: u64 SHOULD be printed with %llu/%llx, (unsigned long long): - printk("%llu", (unsigned long long)u64_var); + printk("%llu", u64_var); s64 SHOULD be printed with %lld/%llx, (long long): - printk("%lld", (long long)s64_var); + printk("%lld", s64_var); If is dependent on a config option for its size (e.g., sector_t, blkcnt_t) or is architecture-dependent for its size (e.g., tcflag_t), use a -- cgit From 453f42d3881a545b21d2f6aa15e62c6a9e4901a2 Mon Sep 17 00:00:00 2001 From: Murilo Opsfelder Araujo Date: Tue, 20 Aug 2013 20:48:39 -0300 Subject: doc: fix a typo in Documentation/00-INDEX Signed-off-by: Murilo Opsfelder Araujo Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/00-INDEX | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 0c4cc688e89a..38f8444bdd0e 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -40,7 +40,7 @@ IPMI.txt IRQ-affinity.txt - how to select which CPU(s) handle which interrupt events on SMP. IRQ-domain.txt - - info on inerrupt numbering and setting up IRQ domains. + - info on interrupt numbering and setting up IRQ domains. IRQ.txt - description of what an IRQ is. Intel-IOMMU.txt -- cgit From 54d4f25b35007ee15a9ce6b8f644cfaee4cc614b Mon Sep 17 00:00:00 2001 From: Jens Frederich Date: Wed, 21 Aug 2013 21:03:09 -0700 Subject: power: Documentation: Update s2ram link The s2ram link is broken because there is a new OpenSuse wiki online. The page does no longer exist, it was merged in the Suspend_to_RAM page. Signed-off-by: Jens Frederich Acked-by: Rob Landley Signed-off-by: Jiri Kosina --- Documentation/power/basic-pm-debugging.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt index 262acf56fa79..e9b54de8fdf7 100644 --- a/Documentation/power/basic-pm-debugging.txt +++ b/Documentation/power/basic-pm-debugging.txt @@ -179,7 +179,7 @@ use the PM_TRACE mechanism documented in Documentation/power/s2ram.txt . To verify that the STR works, it is generally more convenient to use the s2ram tool available from http://suspend.sf.net and documented at -http://en.opensuse.org/SDB:Suspend_to_RAM. +http://en.opensuse.org/SDB:Suspend_to_RAM (S2RAM_LINK). Namely, after writing "freezer", "devices", "platform", "processors", or "core" into /sys/power/pm_test (available if the kernel is compiled with @@ -194,10 +194,10 @@ Among other things, the testing with the help of /sys/power/pm_test may allow you to identify drivers that fail to suspend or resume their devices. They should be unloaded every time before an STR transition. -Next, you can follow the instructions at http://en.opensuse.org/s2ram to test -the system, but if it does not work "out of the box", you may need to boot it -with "init=/bin/bash" and test s2ram in the minimal configuration. In that -case, you may be able to search for failing drivers by following the procedure +Next, you can follow the instructions at S2RAM_LINK to test the system, but if +it does not work "out of the box", you may need to boot it with +"init=/bin/bash" and test s2ram in the minimal configuration. In that case, +you may be able to search for failing drivers by following the procedure analogous to the one described in section 1. If you find some failing drivers, you will have to unload them every time before an STR transition (ie. before you run s2ram), and please report the problems with them. -- cgit From 59e68a181ac84fde466446c942f7c4f9268f62f2 Mon Sep 17 00:00:00 2001 From: Xishi Qiu Date: Thu, 22 Aug 2013 17:42:44 +0800 Subject: mm/hotplug: fix a typo in Documentation/memory-hotplug.txt Fix a trivial typo in Documentation/memory-hotplug.txt Signed-off-by: Xishi Qiu Signed-off-by: Jiri Kosina --- Documentation/memory-hotplug.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt index 8e5eacbdcfa3..d7a9b0a90d45 100644 --- a/Documentation/memory-hotplug.txt +++ b/Documentation/memory-hotplug.txt @@ -163,7 +163,7 @@ a recent addition and not present on older kernels. at read: contains online/offline state of memory. at write: user can specify "online_kernel", "online_movable", "online", "offline" command - which will be performed on al sections in the block. + which will be performed on all sections in the block. 'phys_device' : read-only: designed to show the name of physical memory device. This is not well implemented now. 'removable' : read-only: contains an integer value indicating -- cgit From fd8176e32a094a26523a99e1b961b736bc1f7569 Mon Sep 17 00:00:00 2001 From: Zoltan Kiss Date: Thu, 22 Aug 2013 22:49:31 +0100 Subject: Documentation/trace: Correcting and extending tracepoint documentation The sample missed the moving of the header files into the events subdirectory. I've also extended it based on the existing headers, and mentioned the tiny but important role of CREATE_TRACE_POINTS. Signed-off-by: Zoltan Kiss Acked-by: Mathieu Desnoyers Signed-off-by: Jiri Kosina --- Documentation/trace/tracepoints.txt | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/Documentation/trace/tracepoints.txt b/Documentation/trace/tracepoints.txt index da49437d5aeb..ac4170dd0f24 100644 --- a/Documentation/trace/tracepoints.txt +++ b/Documentation/trace/tracepoints.txt @@ -40,7 +40,13 @@ Two elements are required for tracepoints : In order to use tracepoints, you should include linux/tracepoint.h. -In include/trace/subsys.h : +In include/trace/events/subsys.h : + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM subsys + +#if !defined(_TRACE_SUBSYS_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_SUBSYS_H #include @@ -48,10 +54,16 @@ DECLARE_TRACE(subsys_eventname, TP_PROTO(int firstarg, struct task_struct *p), TP_ARGS(firstarg, p)); +#endif /* _TRACE_SUBSYS_H */ + +/* This part must be outside protection */ +#include + In subsys/file.c (where the tracing statement must be added) : -#include +#include +#define CREATE_TRACE_POINTS DEFINE_TRACE(subsys_eventname); void somefct(void) @@ -72,6 +84,9 @@ Where : - TP_ARGS(firstarg, p) are the parameters names, same as found in the prototype. +- if you use the header in multiple source files, #define CREATE_TRACE_POINTS + should appear only in one source file. + Connecting a function (probe) to a tracepoint is done by providing a probe (function to call) for the specific tracepoint through register_trace_subsys_eventname(). Removing a probe is done through -- cgit From 9cf510a58c94ec0e092188b693c30fbc0678a960 Mon Sep 17 00:00:00 2001 From: Li Zhong Date: Fri, 23 Aug 2013 13:52:52 +0800 Subject: Fix comment typo for init_cma_reserved_pageblock It seems the "it's" should be "its" here. Signed-off-by: Li Zhong Signed-off-by: Jiri Kosina --- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index b100255dedda..c2b59dbda196 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -768,7 +768,7 @@ void __init __free_pages_bootmem(struct page *page, unsigned int order) } #ifdef CONFIG_CMA -/* Free whole pageblock and set it's migration type to MIGRATE_CMA. */ +/* Free whole pageblock and set its migration type to MIGRATE_CMA. */ void __init init_cma_reserved_pageblock(struct page *page) { unsigned i = pageblock_nr_pages; -- cgit From 9e03aa2f830c5f0ea8c28790a61e65ed7403b053 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 3 Sep 2013 13:45:58 -0700 Subject: treewide: Convert retrun typos to return Tyops should be fixed. Signed-off-by: Joe Perches Signed-off-by: Jiri Kosina --- drivers/net/wireless/rtlwifi/rtl8192de/dm.c | 2 +- drivers/scsi/bfa/bfad_im.c | 2 +- drivers/scsi/hpsa.c | 2 +- drivers/scsi/lpfc/lpfc_bsg.c | 2 +- drivers/scsi/qla2xxx/qla_bsg.c | 2 +- drivers/tty/serial/kgdboc.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c index 47875ba09ff8..f700f7a614b2 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c @@ -416,7 +416,7 @@ static void rtl92d_dm_dig(struct ieee80211_hw *hw) /* because we will send data pkt when scanning * this will cause some ap like gear-3700 wep TP - * lower if we retrun here, this is the diff of + * lower if we return here, this is the diff of * mac80211 driver vs ieee80211 driver */ /* if (rtlpriv->mac80211.act_scanning) * return; */ diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c index 9796284512a9..9967f9c14851 100644 --- a/drivers/scsi/bfa/bfad_im.c +++ b/drivers/scsi/bfa/bfad_im.c @@ -206,7 +206,7 @@ bfad_im_abort_handler(struct scsi_cmnd *cmnd) spin_lock_irqsave(&bfad->bfad_lock, flags); hal_io = (struct bfa_ioim_s *) cmnd->host_scribble; if (!hal_io) { - /* IO has been completed, retrun success */ + /* IO has been completed, return success */ rc = SUCCESS; goto out; } diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 7f4f790a3d71..4cfa3af95b52 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1054,7 +1054,7 @@ free_and_out: } /* - * Lookup bus/target/lun and retrun corresponding struct hpsa_scsi_dev_t * + * Lookup bus/target/lun and return corresponding struct hpsa_scsi_dev_t * * Assume's h->devlock is held. */ static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h, diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index 6630520d295c..fcbedd6053c4 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -2627,7 +2627,7 @@ err_get_xri_exit: * @phba: Pointer to HBA context object * * This function allocates BSG_MBOX_SIZE (4KB) page size dma buffer and. - * retruns the pointer to the buffer. + * returns the pointer to the buffer. **/ static struct lpfc_dmabuf * lpfc_bsg_dma_page_alloc(struct lpfc_hba *phba) diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c index 417eaad50ae2..5afdc3a25014 100644 --- a/drivers/scsi/qla2xxx/qla_bsg.c +++ b/drivers/scsi/qla2xxx/qla_bsg.c @@ -1882,7 +1882,7 @@ done: bsg_job->reply->reply_payload_rcv_len = 0; bsg_job->reply->result = (DID_OK) << 16; bsg_job->job_done(bsg_job); - /* Always retrun success, vendor rsp carries correct status */ + /* Always return success, vendor rsp carries correct status */ return 0; } diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c index 10020547c60b..a260cde743e2 100644 --- a/drivers/tty/serial/kgdboc.c +++ b/drivers/tty/serial/kgdboc.c @@ -45,7 +45,7 @@ static int kgdboc_reset_connect(struct input_handler *handler, { input_reset_device(dev); - /* Retrun an error - we do not want to bind, just to reset */ + /* Return an error - we do not want to bind, just to reset */ return -ENODEV; } -- cgit From f8ea61e63442c25cbe6ddee48979b444f1f2a01c Mon Sep 17 00:00:00 2001 From: Xishi Qiu Date: Wed, 4 Sep 2013 18:58:29 +0800 Subject: doc: Documentation/cputopology.txt fix typo Fix a trivial typo in Documentation/cputopology.txt Signed-off-by: Xishi Qiu Signed-off-by: Jiri Kosina --- Documentation/cputopology.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt index 902d3151f527..0aad6deb2d96 100644 --- a/Documentation/cputopology.txt +++ b/Documentation/cputopology.txt @@ -22,7 +22,7 @@ to /proc/cpuinfo. 4) /sys/devices/system/cpu/cpuX/topology/thread_siblings: - internel kernel map of cpuX's hardware threads within the same + internal kernel map of cpuX's hardware threads within the same core as cpuX 5) /sys/devices/system/cpu/cpuX/topology/core_siblings: -- cgit