From 3789af9a13e5561738c0f2114e3a5e22c843ca3e Mon Sep 17 00:00:00 2001 From: Krzysztof Wilczyński Date: Thu, 30 Jul 2020 21:08:48 +0000 Subject: PCI/PM: Rename pci_dev.d3_delay to d3hot_delay MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit PCI devices support two variants of the D3 power state: D3hot (main power present) D3cold (main power removed). Previously struct pci_dev contained: unsigned int d3_delay; /* D3->D0 transition time in ms */ unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */ "d3_delay" refers specifically to the D3hot state. Rename it to "d3hot_delay" to avoid ambiguity and align with the ACPI "_DSM for Specifying Device Readiness Durations" in the PCI Firmware spec r3.2, sec 4.6.9. There is no change to the functionality. Link: https://lore.kernel.org/r/20200730210848.1578826-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński Signed-off-by: Bjorn Helgaas --- Documentation/power/pci.rst | 2 +- arch/x86/pci/fixup.c | 2 +- arch/x86/pci/intel_mid_pci.c | 2 +- drivers/hid/intel-ish-hid/ipc/ipc.c | 2 +- drivers/net/ethernet/marvell/sky2.c | 2 +- drivers/pci/pci-acpi.c | 6 +-- drivers/pci/pci.c | 14 ++--- drivers/pci/pci.h | 4 +- drivers/pci/quirks.c | 68 ++++++++++++------------ drivers/staging/media/atomisp/pci/atomisp_v4l2.c | 2 +- include/linux/pci.h | 2 +- include/uapi/linux/pci_regs.h | 2 +- 12 files changed, 54 insertions(+), 54 deletions(-) diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst index 1831e431f725..b04fb18cc4e2 100644 --- a/Documentation/power/pci.rst +++ b/Documentation/power/pci.rst @@ -320,7 +320,7 @@ that these callbacks operate on:: unsigned int d2_support:1; /* Low power state D2 is supported */ unsigned int no_d1d2:1; /* D1 and D2 are forbidden */ unsigned int wakeup_prepared:1; /* Device prepared for wake up */ - unsigned int d3_delay; /* D3->D0 transition time in ms */ + unsigned int d3hot_delay; /* D3hot->D0 transition time in ms */ ... }; diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index b8c9a5b87f37..0a0e168be1cb 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -587,7 +587,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0xa26d, pci_invalid_bar); static void pci_fixup_amd_ehci_pme(struct pci_dev *dev) { dev_info(&dev->dev, "PME# does not work under D3, disabling it\n"); - dev->pme_support &= ~((PCI_PM_CAP_PME_D3 | PCI_PM_CAP_PME_D3cold) + dev->pme_support &= ~((PCI_PM_CAP_PME_D3hot | PCI_PM_CAP_PME_D3cold) >> PCI_PM_CAP_PME_SHIFT); } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x7808, pci_fixup_amd_ehci_pme); diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c index 00c62115f39c..979f310b67d4 100644 --- a/arch/x86/pci/intel_mid_pci.c +++ b/arch/x86/pci/intel_mid_pci.c @@ -322,7 +322,7 @@ static void pci_d3delay_fixup(struct pci_dev *dev) */ if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID)) return; - dev->d3_delay = 0; + dev->d3hot_delay = 0; } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup); diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c index 8f8dfdf64833..a45ac7fa417b 100644 --- a/drivers/hid/intel-ish-hid/ipc/ipc.c +++ b/drivers/hid/intel-ish-hid/ipc/ipc.c @@ -755,7 +755,7 @@ static int _ish_hw_reset(struct ishtp_device *dev) csr |= PCI_D3hot; pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, csr); - mdelay(pdev->d3_delay); + mdelay(pdev->d3hot_delay); csr &= ~PCI_PM_CTRL_STATE_MASK; csr |= PCI_D0; diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index cec8124301c7..dd11c06ca7f9 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -5105,7 +5105,7 @@ static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) INIT_WORK(&hw->restart_work, sky2_restart); pci_set_drvdata(pdev, hw); - pdev->d3_delay = 300; + pdev->d3hot_delay = 300; return 0; diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index d5869a03f748..154db9a47511 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -1167,7 +1167,7 @@ static struct acpi_device *acpi_pci_find_companion(struct device *dev) * @pdev: the PCI device whose delay is to be updated * @handle: ACPI handle of this device * - * Update the d3_delay and d3cold_delay of a PCI device from the ACPI _DSM + * Update the d3hot_delay and d3cold_delay of a PCI device from the ACPI _DSM * control method of either the device itself or the PCI host bridge. * * Function 8, "Reset Delay," applies to the entire hierarchy below a PCI @@ -1206,8 +1206,8 @@ static void pci_acpi_optimize_delay(struct pci_dev *pdev, } if (elements[3].type == ACPI_TYPE_INTEGER) { value = (int)elements[3].integer.value / 1000; - if (value < PCI_PM_D3_WAIT) - pdev->d3_delay = value; + if (value < PCI_PM_D3HOT_WAIT) + pdev->d3hot_delay = value; } } ACPI_FREE(obj); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index a458c46d7e39..c4a26532a447 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -49,7 +49,7 @@ EXPORT_SYMBOL(isa_dma_bridge_buggy); int pci_pci_problems; EXPORT_SYMBOL(pci_pci_problems); -unsigned int pci_pm_d3_delay; +unsigned int pci_pm_d3hot_delay; static void pci_pme_list_scan(struct work_struct *work); @@ -66,10 +66,10 @@ struct pci_pme_device { static void pci_dev_d3_sleep(struct pci_dev *dev) { - unsigned int delay = dev->d3_delay; + unsigned int delay = dev->d3hot_delay; - if (delay < pci_pm_d3_delay) - delay = pci_pm_d3_delay; + if (delay < pci_pm_d3hot_delay) + delay = pci_pm_d3hot_delay; if (delay) msleep(delay); @@ -3013,7 +3013,7 @@ void pci_pm_init(struct pci_dev *dev) } dev->pm_cap = pm; - dev->d3_delay = PCI_PM_D3_WAIT; + dev->d3hot_delay = PCI_PM_D3HOT_WAIT; dev->d3cold_delay = PCI_PM_D3COLD_WAIT; dev->bridge_d3 = pci_bridge_d3_possible(dev); dev->d3cold_allowed = true; @@ -3038,7 +3038,7 @@ void pci_pm_init(struct pci_dev *dev) (pmc & PCI_PM_CAP_PME_D0) ? " D0" : "", (pmc & PCI_PM_CAP_PME_D1) ? " D1" : "", (pmc & PCI_PM_CAP_PME_D2) ? " D2" : "", - (pmc & PCI_PM_CAP_PME_D3) ? " D3hot" : "", + (pmc & PCI_PM_CAP_PME_D3hot) ? " D3hot" : "", (pmc & PCI_PM_CAP_PME_D3cold) ? " D3cold" : ""); dev->pme_support = pmc >> PCI_PM_CAP_PME_SHIFT; dev->pme_poll = true; @@ -4621,7 +4621,7 @@ static int pci_af_flr(struct pci_dev *dev, int probe) * * NOTE: This causes the caller to sleep for twice the device power transition * cooldown period, which for the D0->D3hot and D3hot->D0 transitions is 10 ms - * by default (i.e. unless the @dev's d3_delay field has a different value). + * by default (i.e. unless the @dev's d3hot_delay field has a different value). * Moreover, only devices in D0 can be reset by this function. */ static int pci_pm_reset(struct pci_dev *dev, int probe) diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index fa12f7cbc1a0..8d492669ecfd 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -44,7 +44,7 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev); int pci_bus_error_reset(struct pci_dev *dev); #define PCI_PM_D2_DELAY 200 -#define PCI_PM_D3_WAIT 10 +#define PCI_PM_D3HOT_WAIT 10 #define PCI_PM_D3COLD_WAIT 100 #define PCI_PM_BUS_WAIT 50 @@ -178,7 +178,7 @@ extern struct mutex pci_slot_mutex; extern raw_spinlock_t pci_lock; -extern unsigned int pci_pm_d3_delay; +extern unsigned int pci_pm_d3hot_delay; #ifdef CONFIG_PCI_MSI void pci_no_msi(void); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index bdf9b52567e0..72b22a35e516 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1846,7 +1846,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pci */ static void quirk_intel_pcie_pm(struct pci_dev *dev) { - pci_pm_d3_delay = 120; + pci_pm_d3hot_delay = 120; dev->no_d1d2 = 1; } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm); @@ -1873,12 +1873,12 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); static void quirk_d3hot_delay(struct pci_dev *dev, unsigned int delay) { - if (dev->d3_delay >= delay) + if (dev->d3hot_delay >= delay) return; - dev->d3_delay = delay; + dev->d3hot_delay = delay; pci_info(dev, "extending delay after power-on from D3hot to %d msec\n", - dev->d3_delay); + dev->d3hot_delay); } static void quirk_radeon_pm(struct pci_dev *dev) @@ -3387,36 +3387,36 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq); * PCI devices which are on Intel chips can skip the 10ms delay * before entering D3 mode. */ -static void quirk_remove_d3_delay(struct pci_dev *dev) -{ - dev->d3_delay = 0; -} -/* C600 Series devices do not need 10ms d3_delay */ -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3_delay); -/* Lynxpoint-H PCH devices do not need 10ms d3_delay */ -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3_delay); -/* Intel Cherrytrail devices do not need 10ms d3_delay */ -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2280, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b0, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b8, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22d8, quirk_remove_d3_delay); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22dc, quirk_remove_d3_delay); +static void quirk_remove_d3hot_delay(struct pci_dev *dev) +{ + dev->d3hot_delay = 0; +} +/* C600 Series devices do not need 10ms d3hot_delay */ +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3hot_delay); +/* Lynxpoint-H PCH devices do not need 10ms d3hot_delay */ +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3hot_delay); +/* Intel Cherrytrail devices do not need 10ms d3hot_delay */ +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2280, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b0, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b8, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22d8, quirk_remove_d3hot_delay); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22dc, quirk_remove_d3hot_delay); /* * Some devices may pass our check in pci_intx_mask_supported() if diff --git a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c index a000a1e316f7..beba430a197e 100644 --- a/drivers/staging/media/atomisp/pci/atomisp_v4l2.c +++ b/drivers/staging/media/atomisp/pci/atomisp_v4l2.c @@ -1573,7 +1573,7 @@ static int atomisp_pci_probe(struct pci_dev *pdev, const struct pci_device_id *i spin_lock_init(&isp->lock); /* This is not a true PCI device on SoC, so the delay is not needed. */ - pdev->d3_delay = 0; + pdev->d3hot_delay = 0; pci_set_drvdata(pdev, isp); diff --git a/include/linux/pci.h b/include/linux/pci.h index c9e169c4e216..bea1a03faab6 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -373,7 +373,7 @@ struct pci_dev { user sysfs */ unsigned int clear_retrain_link:1; /* Need to clear Retrain Link bit manually */ - unsigned int d3_delay; /* D3->D0 transition time in ms */ + unsigned int d3hot_delay; /* D3hot->D0 transition time in ms */ unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */ #ifdef CONFIG_PCIEASPM diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index f9701410d3b5..49f15c37e771 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -246,7 +246,7 @@ #define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */ #define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */ #define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */ -#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */ +#define PCI_PM_CAP_PME_D3hot 0x4000 /* PME# from D3 (hot) */ #define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */ #define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */ #define PCI_PM_CTRL 4 /* PM control and status register */ -- cgit