From 3fae166e6799fc51c8e262d9ce48452be12bf5f2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 31 Aug 2016 08:49:52 +0100 Subject: ARM: sa1100/h3xxx: convert serial to gpiod APIs Convert the iPAQ H3xxx serial modem control signals to use the gpiod APIs rather than custom callbacks into platform code. Acked-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-sa1100/h3xxx.c | 64 ++++++++------------------------------------ 1 file changed, 11 insertions(+), 53 deletions(-) diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c index 36a78b0c106f..e7362292612a 100644 --- a/arch/arm/mach-sa1100/h3xxx.c +++ b/arch/arm/mach-sa1100/h3xxx.c @@ -87,57 +87,6 @@ static struct resource h3xxx_flash_resource = /* * H3xxx uart support */ -static struct gpio h3xxx_uart_gpio[] = { - { H3XXX_GPIO_COM_DCD, GPIOF_IN, "COM DCD" }, - { H3XXX_GPIO_COM_CTS, GPIOF_IN, "COM CTS" }, - { H3XXX_GPIO_COM_RTS, GPIOF_OUT_INIT_LOW, "COM RTS" }, -}; - -static bool h3xxx_uart_request_gpios(void) -{ - static bool h3xxx_uart_gpio_ok; - int rc; - - if (h3xxx_uart_gpio_ok) - return true; - - rc = gpio_request_array(h3xxx_uart_gpio, ARRAY_SIZE(h3xxx_uart_gpio)); - if (rc) - pr_err("h3xxx_uart_request_gpios: error %d\n", rc); - else - h3xxx_uart_gpio_ok = true; - - return h3xxx_uart_gpio_ok; -} - -static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl) -{ - if (port->mapbase == _Ser3UTCR0) { - if (!h3xxx_uart_request_gpios()) - return; - gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS)); - } -} - -static u_int h3xxx_uart_get_mctrl(struct uart_port *port) -{ - u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR; - - if (port->mapbase == _Ser3UTCR0) { - if (!h3xxx_uart_request_gpios()) - return ret; - /* - * DCD and CTS bits are inverted in GPLR by RS232 transceiver - */ - if (gpio_get_value(H3XXX_GPIO_COM_DCD)) - ret &= ~TIOCM_CD; - if (gpio_get_value(H3XXX_GPIO_COM_CTS)) - ret &= ~TIOCM_CTS; - } - - return ret; -} - static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate) { if (port->mapbase == _Ser3UTCR0) { @@ -170,12 +119,20 @@ static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable) } static struct sa1100_port_fns h3xxx_port_fns __initdata = { - .set_mctrl = h3xxx_uart_set_mctrl, - .get_mctrl = h3xxx_uart_get_mctrl, .pm = h3xxx_uart_pm, .set_wake = h3xxx_uart_set_wake, }; +static struct gpiod_lookup_table h3xxx_uart3_gpio_table = { + .dev_id = "sa11x0-uart.3", + .table = { + GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_DCD, "dcd", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_CTS, "cts", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_RTS, "rts", GPIO_ACTIVE_LOW), + { }, + }, +}; + /* * EGPIO */ @@ -283,6 +240,7 @@ static struct gpiod_lookup_table h3xxx_pcmcia_gpio_table = { void __init h3xxx_mach_init(void) { gpiod_add_lookup_table(&h3xxx_pcmcia_gpio_table); + gpiod_add_lookup_table(&h3xxx_uart3_gpio_table); sa1100_register_uart_fns(&h3xxx_port_fns); sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1); platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices)); -- cgit