From 56e4446df9c1214e886fdc7603a5c1cb99cb1843 Mon Sep 17 00:00:00 2001 From: Doug Berger Date: Fri, 23 Feb 2018 13:09:23 -0800 Subject: ARM: brcmstb: Add support for the V7 memory map The 7278 device is the first device that includes support for the V7 memory map developed for use in 64-bit architecture brcmstb devices. This map relocates the register physical offset from 0xF0000000 to 0x0000000008000000. Since the ARM PERIPHBASE value is also relocated in the V7 memory map we can use its value to determine whether this device uses the new V7 memory map and therefore where to look for the SUN_TOP_CTRL register used to identify the chip family. Signed-off-by: Doug Berger Signed-off-by: Florian Fainelli --- arch/arm/include/debug/brcmstb.S | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S index c826f15d2f80..0f580caa81e5 100644 --- a/arch/arm/include/debug/brcmstb.S +++ b/arch/arm/include/debug/brcmstb.S @@ -11,20 +11,25 @@ * GNU General Public License for more details. */ #include +#include /* Physical register offset and virtual register offset */ #define REG_PHYS_BASE 0xf0000000 +#define REG_PHYS_BASE_V7 0x08000000 #define REG_VIRT_BASE 0xfc000000 #define REG_PHYS_ADDR(x) ((x) + REG_PHYS_BASE) +#define REG_PHYS_ADDR_V7(x) ((x) + REG_PHYS_BASE_V7) /* Product id can be read from here */ #define SUN_TOP_CTRL_BASE REG_PHYS_ADDR(0x404000) +#define SUN_TOP_CTRL_BASE_V7 REG_PHYS_ADDR_V7(0x404000) #define UARTA_3390 REG_PHYS_ADDR(0x40a900) #define UARTA_7250 REG_PHYS_ADDR(0x40b400) #define UARTA_7260 REG_PHYS_ADDR(0x40c000) #define UARTA_7268 UARTA_7260 #define UARTA_7271 UARTA_7268 +#define UARTA_7278 REG_PHYS_ADDR_V7(0x40c000) #define UARTA_7364 REG_PHYS_ADDR(0x40b000) #define UARTA_7366 UARTA_7364 #define UARTA_74371 REG_PHYS_ADDR(0x406b00) @@ -55,8 +60,21 @@ mov \rv, #0 @ yes; record init is done str \rv, [\tmp] + /* Check for V7 memory map if B53 */ + mrc p15, 0, \rv, c0, c0, 0 @ get Main ID register + ldr \rp, =ARM_CPU_PART_MASK + and \rv, \rv, \rp + ldr \rp, =ARM_CPU_PART_BRAHMA_B53 @ check for B53 CPU + cmp \rv, \rp + bne 10f + + /* if PERIPHBASE doesn't overlap REG_PHYS_BASE use V7 map */ + mrc p15, 1, \rv, c15, c3, 0 @ get PERIPHBASE from CBAR + ands \rv, \rv, #REG_PHYS_BASE + ldreq \rp, =SUN_TOP_CTRL_BASE_V7 + /* Check SUN_TOP_CTRL base */ - ldr \rp, =SUN_TOP_CTRL_BASE @ load SUN_TOP_CTRL PA +10: ldrne \rp, =SUN_TOP_CTRL_BASE @ load SUN_TOP_CTRL PA ldr \rv, [\rp, #0] @ get register contents ARM_BE8( rev \rv, \rv ) and \rv, \rv, #0xffffff00 @ strip revision bits [7:0] @@ -72,6 +90,7 @@ ARM_BE8( rev \rv, \rv ) 27: checkuart(\rp, \rv, 0x07437100, 74371) 28: checkuart(\rp, \rv, 0x74390000, 7439) 29: checkuart(\rp, \rv, 0x74450000, 7445) +30: checkuart(\rp, \rv, 0x72780000, 7278) /* No valid UART found */ 90: mov \rp, #0 -- cgit