From 6bb2a8225a7cc90b3a3a3030d59b7cb16c7a06cf Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 1 Dec 2019 15:35:08 +0000 Subject: arm64: dts: configure Macchiatobin 10G PHY LED modes Configure the Macchiatobin 10G PHY LED modes to correct their polarity. We keep the existing LED behaviours, but switch their polarity to reflect how they are connected. Tweak the LED modes as well to be: left: off = no link solid green = RJ45 link up (not SFP+ cage) flash green = traffic right: off = no link solid green = 10G solid yellow = 1G flash green = 100M flash yellow = 10M Signed-off-by: Russell King --- arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index 1766cf58101b..68c27f22ff57 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -21,12 +21,14 @@ compatible = "ethernet-phy-ieee802.3-c45"; reg = <0>; sfp = <&sfp_eth0>; + marvell,led-mode = /bits/ 16 <0x0129 0x095d 0x0855>; }; phy8: ethernet-phy@8 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <8>; sfp = <&sfp_eth1>; + marvell,led-mode = /bits/ 16 <0x0129 0x095d 0x0855>; }; }; -- cgit