From 775eb3f765aedf53e7011b24656851a3f03acaa1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 19 Dec 2017 11:27:31 +0000 Subject: ARM: dts: vf610-zii-dev-rev-b: add interrupts for 88e1545 PHY The 88e1545 PHY has its interrupts wired to the VF610, so we might as well use them. Signed-off-by: Russell King --- This is certainly not correct, as all PHYs on this device share the same interrupt line, but we can't specify the pinmux settings individually on each PHY. How should this be handled? --- arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 1f9686c33a84..6cc468e891e3 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -269,12 +269,20 @@ #size-cells = <0>; switch2phy0: phy@0 { + interrupt-parent = <&gpio0>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mv88e1545>; }; switch2phy1: phy@1 { + interrupt-parent = <&gpio0>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; reg = <1>; }; switch2phy2: phy@2 { + interrupt-parent = <&gpio0>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; reg = <2>; }; }; @@ -436,6 +444,12 @@ >; }; + pinctrl_mv88e1545: pinctrl-mv88e1545 { + fsl,pins = < + VF610_PAD_PTB0__GPIO_22 0x219d + >; + }; + pinctrl_pca9554_22: pinctrl-pca95540-22 { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x219d -- cgit