From 7b04992760d1e0d7583cf9f0c11402e448089482 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 21 Nov 2019 17:27:14 +0000 Subject: net: sfp: remove incomplete 100BASE-FX and 100BASE-LX support The 100BASE-FX and 100BASE-LX support assumes a PHY is present; this is probably an incorrect assumption. In any case, sfp_parse_support() will fail such a module. Let's stop pretending we support these modules. Reviewed-by: Andrew Lunn Signed-off-by: Russell King --- drivers/net/phy/sfp-bus.c | 4 +--- drivers/net/phy/sfp.c | 13 +------------ 2 files changed, 2 insertions(+), 15 deletions(-) diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index 5a72093ab6e7..02ab07624c89 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -342,9 +342,7 @@ phy_interface_t sfp_select_interface(struct sfp_bus *bus, if (phylink_test(link_modes, 2500baseX_Full)) return PHY_INTERFACE_MODE_2500BASEX; - if (id->base.e1000_base_t || - id->base.e100_base_lx || - id->base.e100_base_fx) + if (id->base.e1000_base_t) return PHY_INTERFACE_MODE_SGMII; if (phylink_test(link_modes, 1000baseX_Full)) diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 27360d1840b2..ae6a52a19458 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -1489,18 +1489,7 @@ static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn) static void sfp_sm_probe_for_phy(struct sfp *sfp) { - /* Setting the serdes link mode is guesswork: there's no - * field in the EEPROM which indicates what mode should - * be used. - * - * If it's a gigabit-only fiber module, it probably does - * not have a PHY, so switch to 802.3z negotiation mode. - * Otherwise, switch to SGMII mode (which is required to - * support non-gigabit speeds) and probe for a PHY. - */ - if (sfp->id.base.e1000_base_t || - sfp->id.base.e100_base_lx || - sfp->id.base.e100_base_fx) + if (sfp->id.base.e1000_base_t) sfp_sm_probe_phy(sfp); } -- cgit