From 847424f94050f9a84a5d885501cd03d1fa239265 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 18 Oct 2019 10:37:44 +0100 Subject: net: sfp: add support for cooled SFP+ transceivers Cooled SFP+ transceivers need a longer initialisation (startup) time. Select the initialisation time depending on the cooled option bit. Signed-off-by: Russell King --- drivers/net/phy/sfp.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 7998acc689b7..3e016946cd6c 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -168,6 +168,7 @@ static const enum gpiod_flags gpio_flags[] = { #define T_WAIT msecs_to_jiffies(50) #define T_START_UP msecs_to_jiffies(300) #define T_START_UP_BAD_GPON msecs_to_jiffies(60000) +#define T_START_UP_COOLED msecs_to_jiffies(90000) /* t_reset is the time required to assert the TX_DISABLE signal to reset * an indicated TX_FAULT. @@ -1925,6 +1926,8 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report) if (!memcmp(id.base.vendor_name, "ALCATELLUCENT ", 16) && !memcmp(id.base.vendor_pn, "3FE46541AA ", 16)) sfp->module_t_start_up = T_START_UP_BAD_GPON; + else if (id.ext.options & cpu_to_be16(SFP_OPTIONS_COOLED_XCVR)) + sfp->module_t_start_up = T_START_UP_COOLED; else sfp->module_t_start_up = T_START_UP; @@ -2131,10 +2134,10 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event) break; if (sfp->state & SFP_F_TX_FAULT) { - /* Wait up to t_init (SFF-8472) or t_start_up (SFF-8431) - * from the TX_DISABLE deassertion for the module to - * initialise, which is indicated by TX_FAULT - * deasserting. + /* Wait up to t_init (SFF-8472), t_start_up (SFF-8431), + * or t_start_up_cooled (SFF-8431) from the TX_DISABLE + * deassertion for the module to initialise, which is + * indicated by TX_FAULT deasserting. */ timeout = sfp->module_t_start_up; if (timeout > T_WAIT) @@ -2153,8 +2156,8 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event) case SFP_S_INIT: if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) { - /* TX_FAULT is still asserted after t_init or - * or t_start_up, so assume there is a fault. + /* TX_FAULT is still asserted after t_init, t_start_up + * or t_start_up_cooled, so assume there is a fault. */ sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT, sfp->sm_fault_retries == N_FAULT_INIT); -- cgit