From 944520f85d5b1fb2f9ea243be41f9c9af3d4cef3 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Thu, 22 Jun 2023 19:59:34 +0200 Subject: MIPS: DTS: CI20: Raise VDDCORE voltage to 1.125 volts Commit 08384e80a70f ("MIPS: DTS: CI20: Fix ACT8600 regulator node names") caused the VDDCORE power supply (regulated by the ACT8600's DCDC1 output) to drop from a voltage of 1.2V configured by the bootloader, to the 1.1V set in the Device Tree. According to the documentation, the VDDCORE supply should be between 0.99V and 1.21V; both values are therefore within the supported range. However, VDDCORE being 1.1V results in the CI20 being very unstable, with corrupted memory, failures to boot, or reboots at random. The reason might be succint drops of the voltage below the minimum required. Raising the minimum voltage to 1.125 volts seems to be enough to address this issue, while still keeping a relatively low core voltage which helps for power consumption and thermals. Fixes: 08384e80a70f ("MIPS: DTS: CI20: Fix ACT8600 regulator node names") Signed-off-by: Paul Cercueil Signed-off-by: Thomas Bogendoerfer --- arch/mips/boot/dts/ingenic/ci20.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index cec0caa2350c..a141a699b790 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -298,8 +298,8 @@ regulators { vddcore: DCDC1 { - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; vp1-supply = <&vcc_33v>; regulator-always-on; }; -- cgit