From a5fcc6522fd43acba09aa9ffca09872aaf02cd5e Mon Sep 17 00:00:00 2001 From: Alban Bedel Date: Sun, 31 May 2015 02:18:26 +0200 Subject: MIPS: Add basic support for the TL-WR1043ND version 1 Add a DTS for TL-WR1043ND version 1 and allow to have it built in the kernel to circumvent the broken u-boot found on these boards. Currently only the UART, LEDs and buttons are supported. Signed-off-by: Alban Bedel Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle --- arch/mips/ath79/Kconfig | 12 ++ arch/mips/boot/dts/Makefile | 1 + arch/mips/boot/dts/qca/Makefile | 11 ++ arch/mips/boot/dts/qca/ar9132.dtsi | 133 +++++++++++++++++++++++ arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 112 +++++++++++++++++++ 5 files changed, 269 insertions(+) create mode 100644 arch/mips/boot/dts/qca/Makefile create mode 100644 arch/mips/boot/dts/qca/ar9132.dtsi create mode 100644 arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig index dfc60209dc63..13c04cf54afa 100644 --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig @@ -71,6 +71,18 @@ config ATH79_MACH_UBNT_XM Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. +choice + prompt "Build a DTB in the kernel" + optional + help + Select a devicetree that should be built into the kernel. + + config DTB_TL_WR1043ND_V1 + bool "TL-WR1043ND Version 1" + select BUILTIN_DTB + select SOC_AR913X +endchoice + endmenu config SOC_AR71XX diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile index 9c31b30890aa..778a34028c1b 100644 --- a/arch/mips/boot/dts/Makefile +++ b/arch/mips/boot/dts/Makefile @@ -4,6 +4,7 @@ dts-dirs += ingenic dts-dirs += lantiq dts-dirs += mti dts-dirs += netlogic +dts-dirs += qca dts-dirs += ralink obj-y := $(addsuffix /, $(dts-dirs)) diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile new file mode 100644 index 000000000000..2d61455d585d --- /dev/null +++ b/arch/mips/boot/dts/qca/Makefile @@ -0,0 +1,11 @@ +# All DTBs +dtb-$(CONFIG_ATH79) += ar9132_tl_wr1043nd_v1.dtb + +# Select a DTB to build in the kernel +obj-$(CONFIG_DTB_TL_WR1043ND_V1) += ar9132_tl_wr1043nd_v1.dtb.o + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi new file mode 100644 index 000000000000..4759cff814d1 --- /dev/null +++ b/arch/mips/boot/dts/qca/ar9132.dtsi @@ -0,0 +1,133 @@ +/ { + compatible = "qca,ar9132"; + + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "mips,mips24Kc"; + reg = <0>; + }; + }; + + cpuintc: interrupt-controller { + compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc"; + + interrupt-controller; + #interrupt-cells = <1>; + + qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; + qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, + <&ddr_ctrl 0>, <&ddr_ctrl 1>; + }; + + ahb { + compatible = "simple-bus"; + ranges; + + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&cpuintc>; + + apb { + compatible = "simple-bus"; + ranges; + + #address-cells = <1>; + #size-cells = <1>; + + interrupt-parent = <&miscintc>; + + ddr_ctrl: memory-controller@18000000 { + compatible = "qca,ar9132-ddr-controller", + "qca,ar7240-ddr-controller"; + reg = <0x18000000 0x100>; + + #qca,ddr-wb-channel-cells = <1>; + }; + + uart@18020000 { + compatible = "ns8250"; + reg = <0x18020000 0x20>; + interrupts = <3>; + + clocks = <&pll 2>; + clock-names = "uart"; + + reg-io-width = <4>; + reg-shift = <2>; + no-loopback-test; + + status = "disabled"; + }; + + gpio: gpio@18040000 { + compatible = "qca,ar9132-gpio", + "qca,ar7100-gpio"; + reg = <0x18040000 0x30>; + interrupts = <2>; + + ngpios = <22>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pll: pll-controller@18050000 { + compatible = "qca,ar9132-ppl", + "qca,ar9130-pll"; + reg = <0x18050000 0x20>; + + clock-names = "ref"; + /* The board must provides the ref clock */ + + #clock-cells = <1>; + clock-output-names = "cpu", "ddr", "ahb"; + }; + + wdt@18060008 { + compatible = "qca,ar7130-wdt"; + reg = <0x18060008 0x8>; + + interrupts = <4>; + + clocks = <&pll 2>; + clock-names = "wdt"; + }; + + miscintc: interrupt-controller@18060010 { + compatible = "qca,ar9132-misc-intc", + "qca,ar7100-misc-intc"; + reg = <0x18060010 0x4>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + spi@1f000000 { + compatible = "qca,ar9132-spi", "qca,ar7100-spi"; + reg = <0x1f000000 0x10>; + + clocks = <&pll 2>; + clock-names = "ahb"; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts new file mode 100644 index 000000000000..003015ab34e7 --- /dev/null +++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts @@ -0,0 +1,112 @@ +/dts-v1/; + +#include +#include + +#include "ar9132.dtsi" + +/ { + compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132"; + model = "TP-Link TL-WR1043ND Version 1"; + + alias { + serial0 = "/ahb/apb/uart@18020000"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + extosc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <40000000>; + }; + + ahb { + apb { + uart@18020000 { + status = "okay"; + }; + + pll-controller@18050000 { + clocks = <&extosc>; + }; + }; + + spi@1f000000 { + status = "okay"; + num-cs = <1>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "s25sl064a"; + reg = <0>; + spi-max-frequency = <25000000>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + }; + + partition@1 { + label = "firmware"; + reg = <0x020000 0x7D0000>; + }; + + partition@2 { + label = "art"; + reg = <0x7F0000 0x010000>; + read-only; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + + poll-interval = <20>; + button@0 { + label = "reset"; + linux,code = ; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + button@1 { + label = "qss"; + linux,code = ; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "tp-link:green:usb"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + + led@1 { + label = "tp-link:green:system"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led@2 { + label = "tp-link:green:qss"; + gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + }; + + led@3 { + label = "tp-link:green:wlan"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + }; +}; -- cgit