From 18ec54fdd6d18d92025af097cd042a75cf0ea24c Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Mon, 8 Jul 2019 11:52:25 -0500 Subject: x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations Spectre v1 isn't only about array bounds checks. It can affect any conditional checks. The kernel entry code interrupt, exception, and NMI handlers all have conditional swapgs checks. Those may be problematic in the context of Spectre v1, as kernel code can speculatively run with a user GS. For example: if (coming from user space) swapgs mov %gs:, %reg mov (%reg), %reg1 When coming from user space, the CPU can speculatively skip the swapgs, and then do a speculative percpu load using the user GS value. So the user can speculatively force a read of any kernel value. If a gadget exists which uses the percpu value as an address in another load/store, then the contents of the kernel value may become visible via an L1 side channel attack. A similar attack exists when coming from kernel space. The CPU can speculatively do the swapgs, causing the user GS to get used for the rest of the speculative window. The mitigation is similar to a traditional Spectre v1 mitigation, except: a) index masking isn't possible; because the index (percpu offset) isn't user-controlled; and b) an lfence is needed in both the "from user" swapgs path and the "from kernel" non-swapgs path (because of the two attacks described above). The user entry swapgs paths already have SWITCH_TO_KERNEL_CR3, which has a CR3 write when PTI is enabled. Since CR3 writes are serializing, the lfences can be skipped in those cases. On the other hand, the kernel entry swapgs paths don't depend on PTI. To avoid unnecessary lfences for the user entry case, create two separate features for alternative patching: X86_FEATURE_FENCE_SWAPGS_USER X86_FEATURE_FENCE_SWAPGS_KERNEL Use these features in entry code to patch in lfences where needed. The features aren't enabled yet, so there's no functional change. Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Reviewed-by: Dave Hansen --- arch/x86/entry/calling.h | 17 +++++++++++++++++ arch/x86/entry/entry_64.S | 21 ++++++++++++++++++--- arch/x86/include/asm/cpufeatures.h | 2 ++ 3 files changed, 37 insertions(+), 3 deletions(-) diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h index 9f1f9e3b8230..7ce7ac9d9d3f 100644 --- a/arch/x86/entry/calling.h +++ b/arch/x86/entry/calling.h @@ -314,6 +314,23 @@ For 32-bit we have the following conventions - kernel is built with #endif +/* + * Mitigate Spectre v1 for conditional swapgs code paths. + * + * FENCE_SWAPGS_USER_ENTRY is used in the user entry swapgs code path, to + * prevent a speculative swapgs when coming from kernel space. + * + * FENCE_SWAPGS_KERNEL_ENTRY is used in the kernel entry non-swapgs code path, + * to prevent the swapgs from getting speculatively skipped when coming from + * user space. + */ +.macro FENCE_SWAPGS_USER_ENTRY + ALTERNATIVE "", "lfence", X86_FEATURE_FENCE_SWAPGS_USER +.endm +.macro FENCE_SWAPGS_KERNEL_ENTRY + ALTERNATIVE "", "lfence", X86_FEATURE_FENCE_SWAPGS_KERNEL +.endm + .macro STACKLEAK_ERASE_NOCLOBBER #ifdef CONFIG_GCC_PLUGIN_STACKLEAK PUSH_AND_CLEAR_REGS diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S index a829dd3117d0..57a0d96d6beb 100644 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -519,7 +519,7 @@ ENTRY(interrupt_entry) testb $3, CS-ORIG_RAX+8(%rsp) jz 1f SWAPGS - + FENCE_SWAPGS_USER_ENTRY /* * Switch to the thread stack. The IRET frame and orig_ax are * on the stack, as well as the return address. RDI..R12 are @@ -549,8 +549,10 @@ ENTRY(interrupt_entry) UNWIND_HINT_FUNC movq (%rdi), %rdi + jmpq 2f 1: - + FENCE_SWAPGS_KERNEL_ENTRY +2: PUSH_AND_CLEAR_REGS save_ret=1 ENCODE_FRAME_POINTER 8 @@ -1221,6 +1223,13 @@ ENTRY(paranoid_entry) */ SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=%rax save_reg=%r14 + /* + * The above SAVE_AND_SWITCH_TO_KERNEL_CR3 macro doesn't do an + * unconditional CR3 write, even in the PTI case. So do an lfence + * to prevent GS speculation, regardless of whether PTI is enabled. + */ + FENCE_SWAPGS_KERNEL_ENTRY + ret END(paranoid_entry) @@ -1271,6 +1280,7 @@ ENTRY(error_entry) * from user mode due to an IRET fault. */ SWAPGS + FENCE_SWAPGS_USER_ENTRY /* We have user CR3. Change to kernel CR3. */ SWITCH_TO_KERNEL_CR3 scratch_reg=%rax @@ -1292,6 +1302,8 @@ ENTRY(error_entry) CALL_enter_from_user_mode ret +.Lerror_entry_done_lfence: + FENCE_SWAPGS_KERNEL_ENTRY .Lerror_entry_done: TRACE_IRQS_OFF ret @@ -1310,7 +1322,7 @@ ENTRY(error_entry) cmpq %rax, RIP+8(%rsp) je .Lbstep_iret cmpq $.Lgs_change, RIP+8(%rsp) - jne .Lerror_entry_done + jne .Lerror_entry_done_lfence /* * hack: .Lgs_change can fail with user gsbase. If this happens, fix up @@ -1318,6 +1330,7 @@ ENTRY(error_entry) * .Lgs_change's error handler with kernel gsbase. */ SWAPGS + FENCE_SWAPGS_USER_ENTRY SWITCH_TO_KERNEL_CR3 scratch_reg=%rax jmp .Lerror_entry_done @@ -1332,6 +1345,7 @@ ENTRY(error_entry) * gsbase and CR3. Switch to kernel gsbase and CR3: */ SWAPGS + FENCE_SWAPGS_USER_ENTRY SWITCH_TO_KERNEL_CR3 scratch_reg=%rax /* @@ -1423,6 +1437,7 @@ ENTRY(nmi) swapgs cld + FENCE_SWAPGS_USER_ENTRY SWITCH_TO_KERNEL_CR3 scratch_reg=%rdx movq %rsp, %rdx movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h index 998c2cc08363..4393278666d9 100644 --- a/arch/x86/include/asm/cpufeatures.h +++ b/arch/x86/include/asm/cpufeatures.h @@ -281,6 +281,8 @@ #define X86_FEATURE_CQM_OCCUP_LLC (11*32+ 1) /* LLC occupancy monitoring */ #define X86_FEATURE_CQM_MBM_TOTAL (11*32+ 2) /* LLC Total MBM monitoring */ #define X86_FEATURE_CQM_MBM_LOCAL (11*32+ 3) /* LLC Local MBM monitoring */ +#define X86_FEATURE_FENCE_SWAPGS_USER (11*32+ 4) /* "" LFENCE in user entry SWAPGS path */ +#define X86_FEATURE_FENCE_SWAPGS_KERNEL (11*32+ 5) /* "" LFENCE in kernel entry SWAPGS path */ /* Intel-defined CPU features, CPUID level 0x00000007:1 (EAX), word 12 */ #define X86_FEATURE_AVX512_BF16 (12*32+ 5) /* AVX512 BFLOAT16 instructions */ -- cgit From a2059825986a1c8143fd6698774fa9d83733bb11 Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Mon, 8 Jul 2019 11:52:26 -0500 Subject: x86/speculation: Enable Spectre v1 swapgs mitigations The previous commit added macro calls in the entry code which mitigate the Spectre v1 swapgs issue if the X86_FEATURE_FENCE_SWAPGS_* features are enabled. Enable those features where applicable. The mitigations may be disabled with "nospectre_v1" or "mitigations=off". There are different features which can affect the risk of attack: - When FSGSBASE is enabled, unprivileged users are able to place any value in GS, using the wrgsbase instruction. This means they can write a GS value which points to any value in kernel space, which can be useful with the following gadget in an interrupt/exception/NMI handler: if (coming from user space) swapgs mov %gs:, %reg1 // dependent load or store based on the value of %reg // for example: mov %(reg1), %reg2 If an interrupt is coming from user space, and the entry code speculatively skips the swapgs (due to user branch mistraining), it may speculatively execute the GS-based load and a subsequent dependent load or store, exposing the kernel data to an L1 side channel leak. Note that, on Intel, a similar attack exists in the above gadget when coming from kernel space, if the swapgs gets speculatively executed to switch back to the user GS. On AMD, this variant isn't possible because swapgs is serializing with respect to future GS-based accesses. NOTE: The FSGSBASE patch set hasn't been merged yet, so the above case doesn't exist quite yet. - When FSGSBASE is disabled, the issue is mitigated somewhat because unprivileged users must use prctl(ARCH_SET_GS) to set GS, which restricts GS values to user space addresses only. That means the gadget would need an additional step, since the target kernel address needs to be read from user space first. Something like: if (coming from user space) swapgs mov %gs:, %reg1 mov (%reg1), %reg2 // dependent load or store based on the value of %reg2 // for example: mov %(reg2), %reg3 It's difficult to audit for this gadget in all the handlers, so while there are no known instances of it, it's entirely possible that it exists somewhere (or could be introduced in the future). Without tooling to analyze all such code paths, consider it vulnerable. Effects of SMAP on the !FSGSBASE case: - If SMAP is enabled, and the CPU reports RDCL_NO (i.e., not susceptible to Meltdown), the kernel is prevented from speculatively reading user space memory, even L1 cached values. This effectively disables the !FSGSBASE attack vector. - If SMAP is enabled, but the CPU *is* susceptible to Meltdown, SMAP still prevents the kernel from speculatively reading user space memory. But it does *not* prevent the kernel from reading the user value from L1, if it has already been cached. This is probably only a small hurdle for an attacker to overcome. Thanks to Dave Hansen for contributing the speculative_smap() function. Thanks to Andrew Cooper for providing the inside scoop on whether swapgs is serializing on AMD. [ tglx: Fixed the USER fence decision and polished the comment as suggested by Dave Hansen ] Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Reviewed-by: Dave Hansen --- Documentation/admin-guide/kernel-parameters.txt | 8 +- arch/x86/kernel/cpu/bugs.c | 115 ++++++++++++++++++++++-- 2 files changed, 110 insertions(+), 13 deletions(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index e6e806285703..01d7ad250e98 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -2587,7 +2587,7 @@ expose users to several CPU vulnerabilities. Equivalent to: nopti [X86,PPC] kpti=0 [ARM64] - nospectre_v1 [PPC] + nospectre_v1 [X86,PPC] nobp=0 [S390] nospectre_v2 [X86,PPC,S390,ARM64] spectre_v2_user=off [X86] @@ -2936,9 +2936,9 @@ nosmt=force: Force disable SMT, cannot be undone via the sysfs control file. - nospectre_v1 [PPC] Disable mitigations for Spectre Variant 1 (bounds - check bypass). With this option data leaks are possible - in the system. + nospectre_v1 [X86,PPC] Disable mitigations for Spectre Variant 1 + (bounds check bypass). With this option data leaks are + possible in the system. nospectre_v2 [X86,PPC_FSL_BOOK3E,ARM64] Disable all mitigations for the Spectre variant 2 (indirect branch prediction) diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 66ca906aa790..992f832c447b 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -34,6 +34,7 @@ #include "cpu.h" +static void __init spectre_v1_select_mitigation(void); static void __init spectre_v2_select_mitigation(void); static void __init ssb_select_mitigation(void); static void __init l1tf_select_mitigation(void); @@ -98,17 +99,11 @@ void __init check_bugs(void) if (boot_cpu_has(X86_FEATURE_STIBP)) x86_spec_ctrl_mask |= SPEC_CTRL_STIBP; - /* Select the proper spectre mitigation before patching alternatives */ + /* Select the proper CPU mitigations before patching alternatives: */ + spectre_v1_select_mitigation(); spectre_v2_select_mitigation(); - - /* - * Select proper mitigation for any exposure to the Speculative Store - * Bypass vulnerability. - */ ssb_select_mitigation(); - l1tf_select_mitigation(); - mds_select_mitigation(); arch_smt_update(); @@ -273,6 +268,108 @@ static int __init mds_cmdline(char *str) } early_param("mds", mds_cmdline); +#undef pr_fmt +#define pr_fmt(fmt) "Spectre V1 : " fmt + +enum spectre_v1_mitigation { + SPECTRE_V1_MITIGATION_NONE, + SPECTRE_V1_MITIGATION_AUTO, +}; + +static enum spectre_v1_mitigation spectre_v1_mitigation __ro_after_init = + SPECTRE_V1_MITIGATION_AUTO; + +static const char * const spectre_v1_strings[] = { + [SPECTRE_V1_MITIGATION_NONE] = "Vulnerable: __user pointer sanitization and usercopy barriers only; no swapgs barriers", + [SPECTRE_V1_MITIGATION_AUTO] = "Mitigation: usercopy/swapgs barriers and __user pointer sanitization", +}; + +static bool is_swapgs_serializing(void) +{ + /* + * Technically, swapgs isn't serializing on AMD (despite it previously + * being documented as such in the APM). But according to AMD, %gs is + * updated non-speculatively, and the issuing of %gs-relative memory + * operands will be blocked until the %gs update completes, which is + * good enough for our purposes. + */ + return boot_cpu_data.x86_vendor == X86_VENDOR_AMD; +} + +/* + * Does SMAP provide full mitigation against speculative kernel access to + * userspace? + */ +static bool smap_works_speculatively(void) +{ + if (!boot_cpu_has(X86_FEATURE_SMAP)) + return false; + + /* + * On CPUs which are vulnerable to Meltdown, SMAP does not + * prevent speculative access to user data in the L1 cache. + * Consider SMAP to be non-functional as a mitigation on these + * CPUs. + */ + if (boot_cpu_has(X86_BUG_CPU_MELTDOWN)) + return false; + + return true; +} + +static void __init spectre_v1_select_mitigation(void) +{ + if (!boot_cpu_has_bug(X86_BUG_SPECTRE_V1) || cpu_mitigations_off()) { + spectre_v1_mitigation = SPECTRE_V1_MITIGATION_NONE; + return; + } + + if (spectre_v1_mitigation == SPECTRE_V1_MITIGATION_AUTO) { + /* + * With Spectre v1, a user can speculatively control either + * path of a conditional swapgs with a user-controlled GS + * value. The mitigation is to add lfences to both code paths. + * + * If FSGSBASE is enabled, the user can put a kernel address in + * GS, in which case SMAP provides no protection. + * + * [ NOTE: Don't check for X86_FEATURE_FSGSBASE until the + * FSGSBASE enablement patches have been merged. ] + * + * If FSGSBASE is disabled, the user can only put a user space + * address in GS. That makes an attack harder, but still + * possible if there's no SMAP protection. + */ + if (!smap_works_speculatively()) { + /* + * Mitigation can be provided from SWAPGS itself or + * PTI as the CR3 write in the Meltdown mitigation + * is serializing. + * + * If neither is there, mitigate with an LFENCE. + */ + if (!is_swapgs_serializing() && !boot_cpu_has(X86_FEATURE_PTI)) + setup_force_cpu_cap(X86_FEATURE_FENCE_SWAPGS_USER); + + /* + * Enable lfences in the kernel entry (non-swapgs) + * paths, to prevent user entry from speculatively + * skipping swapgs. + */ + setup_force_cpu_cap(X86_FEATURE_FENCE_SWAPGS_KERNEL); + } + } + + pr_info("%s\n", spectre_v1_strings[spectre_v1_mitigation]); +} + +static int __init nospectre_v1_cmdline(char *str) +{ + spectre_v1_mitigation = SPECTRE_V1_MITIGATION_NONE; + return 0; +} +early_param("nospectre_v1", nospectre_v1_cmdline); + #undef pr_fmt #define pr_fmt(fmt) "Spectre V2 : " fmt @@ -1290,7 +1387,7 @@ static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr break; case X86_BUG_SPECTRE_V1: - return sprintf(buf, "Mitigation: __user pointer sanitization\n"); + return sprintf(buf, "%s\n", spectre_v1_strings[spectre_v1_mitigation]); case X86_BUG_SPECTRE_V2: return sprintf(buf, "%s%s%s%s%s%s\n", spectre_v2_strings[spectre_v2_enabled], -- cgit From 6cd249cfad68a231336983e2216d75b3ddfde1d6 Mon Sep 17 00:00:00 2001 From: Tzung-Bi Shih Date: Mon, 8 Jul 2019 22:19:01 +0800 Subject: ASoC: max98357a: use mdelay for sdmode-delay max98357a_daiops_trigger() is possible to be called in atomic context if the .nonatomic flag is equal to 0 in the DAI links. When cancel_delayed_work_sync() in max98357a_daiops_trigger() is called in atomic context, kernel emits the following message: "BUG: sleeping function called from invalid context". According to the DT binding document, value less than or equal to 5ms of sdmod-delay should be sufficient to avoid the pop noise. Use mdelay (i.e. busy loop) for such low delay should be acceptable. Fixes: cec5b01f8f1c ("ASoC: max98357a: avoid speaker pop when playback startup") Signed-off-by: Tzung-Bi Shih Link: https://lore.kernel.org/r/20190708141901.68797-1-tzungbi@google.com Signed-off-by: Mark Brown --- sound/soc/codecs/max98357a.c | 25 ++++--------------------- 1 file changed, 4 insertions(+), 21 deletions(-) diff --git a/sound/soc/codecs/max98357a.c b/sound/soc/codecs/max98357a.c index 6f0e28f903bf..16313b973eaa 100644 --- a/sound/soc/codecs/max98357a.c +++ b/sound/soc/codecs/max98357a.c @@ -20,20 +20,10 @@ #include struct max98357a_priv { - struct delayed_work enable_sdmode_work; struct gpio_desc *sdmode; unsigned int sdmode_delay; }; -static void max98357a_enable_sdmode_work(struct work_struct *work) -{ - struct max98357a_priv *max98357a = - container_of(work, struct max98357a_priv, - enable_sdmode_work.work); - - gpiod_set_value(max98357a->sdmode, 1); -} - static int max98357a_daiops_trigger(struct snd_pcm_substream *substream, int cmd, struct snd_soc_dai *dai) { @@ -46,14 +36,12 @@ static int max98357a_daiops_trigger(struct snd_pcm_substream *substream, case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - queue_delayed_work(system_power_efficient_wq, - &max98357a->enable_sdmode_work, - msecs_to_jiffies(max98357a->sdmode_delay)); + mdelay(max98357a->sdmode_delay); + gpiod_set_value(max98357a->sdmode, 1); break; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - cancel_delayed_work_sync(&max98357a->enable_sdmode_work); gpiod_set_value(max98357a->sdmode, 0); break; } @@ -112,30 +100,25 @@ static int max98357a_platform_probe(struct platform_device *pdev) int ret; max98357a = devm_kzalloc(&pdev->dev, sizeof(*max98357a), GFP_KERNEL); - if (!max98357a) return -ENOMEM; max98357a->sdmode = devm_gpiod_get_optional(&pdev->dev, "sdmode", GPIOD_OUT_LOW); - if (IS_ERR(max98357a->sdmode)) return PTR_ERR(max98357a->sdmode); ret = device_property_read_u32(&pdev->dev, "sdmode-delay", &max98357a->sdmode_delay); - if (ret) { max98357a->sdmode_delay = 0; dev_dbg(&pdev->dev, - "no optional property 'sdmode-delay' found, default: no delay\n"); + "no optional property 'sdmode-delay' found, " + "default: no delay\n"); } dev_set_drvdata(&pdev->dev, max98357a); - INIT_DELAYED_WORK(&max98357a->enable_sdmode_work, - max98357a_enable_sdmode_work); - return devm_snd_soc_register_component(&pdev->dev, &max98357a_component_driver, &max98357a_dai_driver, 1); -- cgit From 72365164cbefe3afa7a146d27d502ed688bf7323 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 9 Jul 2019 10:22:16 -0700 Subject: ASoC: rt1308: Remove executable attribute from source files These are source files not executable. Signed-off-by: Joe Perches Link: https://lore.kernel.org/r/d198a3e6ed3a0e9070afeb6aca69903c3e985149.camel@perches.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt1308.c | 0 sound/soc/codecs/rt1308.h | 0 2 files changed, 0 insertions(+), 0 deletions(-) mode change 100755 => 100644 sound/soc/codecs/rt1308.c mode change 100755 => 100644 sound/soc/codecs/rt1308.h diff --git a/sound/soc/codecs/rt1308.c b/sound/soc/codecs/rt1308.c old mode 100755 new mode 100644 diff --git a/sound/soc/codecs/rt1308.h b/sound/soc/codecs/rt1308.h old mode 100755 new mode 100644 -- cgit From 9e944c9be2456159fb8c36b0ba3170b2f01c3887 Mon Sep 17 00:00:00 2001 From: Kirill Marinushkin Date: Wed, 10 Jul 2019 07:51:35 +0200 Subject: ASoC: Relocate my e-mail to .com domain zone Signed-off-by: Kirill Marinushkin Link: https://lore.kernel.org/r/20190710055135.21377-1-kmarinushkin@birdec.com Signed-off-by: Mark Brown --- MAINTAINERS | 2 +- sound/soc/codecs/pcm3060-i2c.c | 4 ++-- sound/soc/codecs/pcm3060-spi.c | 4 ++-- sound/soc/codecs/pcm3060.c | 4 ++-- sound/soc/codecs/pcm3060.h | 2 +- 5 files changed, 8 insertions(+), 8 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3e75361f9b3b..11db05b56744 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -15795,7 +15795,7 @@ S: Maintained F: drivers/net/ethernet/ti/netcp* TI PCM3060 ASoC CODEC DRIVER -M: Kirill Marinushkin +M: Kirill Marinushkin L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Maintained F: Documentation/devicetree/bindings/sound/pcm3060.txt diff --git a/sound/soc/codecs/pcm3060-i2c.c b/sound/soc/codecs/pcm3060-i2c.c index cdc8314882bc..abcdeb922201 100644 --- a/sound/soc/codecs/pcm3060-i2c.c +++ b/sound/soc/codecs/pcm3060-i2c.c @@ -2,7 +2,7 @@ // // PCM3060 I2C driver // -// Copyright (C) 2018 Kirill Marinushkin +// Copyright (C) 2018 Kirill Marinushkin #include #include @@ -56,5 +56,5 @@ static struct i2c_driver pcm3060_i2c_driver = { module_i2c_driver(pcm3060_i2c_driver); MODULE_DESCRIPTION("PCM3060 I2C driver"); -MODULE_AUTHOR("Kirill Marinushkin "); +MODULE_AUTHOR("Kirill Marinushkin "); MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/pcm3060-spi.c b/sound/soc/codecs/pcm3060-spi.c index f6f19fa80932..3b79734b832b 100644 --- a/sound/soc/codecs/pcm3060-spi.c +++ b/sound/soc/codecs/pcm3060-spi.c @@ -2,7 +2,7 @@ // // PCM3060 SPI driver // -// Copyright (C) 2018 Kirill Marinushkin +// Copyright (C) 2018 Kirill Marinushkin #include #include @@ -55,5 +55,5 @@ static struct spi_driver pcm3060_spi_driver = { module_spi_driver(pcm3060_spi_driver); MODULE_DESCRIPTION("PCM3060 SPI driver"); -MODULE_AUTHOR("Kirill Marinushkin "); +MODULE_AUTHOR("Kirill Marinushkin "); MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/pcm3060.c b/sound/soc/codecs/pcm3060.c index 32b26f1c2282..b2358069cf9b 100644 --- a/sound/soc/codecs/pcm3060.c +++ b/sound/soc/codecs/pcm3060.c @@ -2,7 +2,7 @@ // // PCM3060 codec driver // -// Copyright (C) 2018 Kirill Marinushkin +// Copyright (C) 2018 Kirill Marinushkin #include #include @@ -342,5 +342,5 @@ int pcm3060_probe(struct device *dev) EXPORT_SYMBOL(pcm3060_probe); MODULE_DESCRIPTION("PCM3060 codec driver"); -MODULE_AUTHOR("Kirill Marinushkin "); +MODULE_AUTHOR("Kirill Marinushkin "); MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/pcm3060.h b/sound/soc/codecs/pcm3060.h index 75931c9a9d85..18d51e5dac2c 100644 --- a/sound/soc/codecs/pcm3060.h +++ b/sound/soc/codecs/pcm3060.h @@ -2,7 +2,7 @@ /* * PCM3060 codec driver * - * Copyright (C) 2018 Kirill Marinushkin + * Copyright (C) 2018 Kirill Marinushkin */ #ifndef _SND_SOC_PCM3060_H -- cgit From 52db6685932e326ed607644ab7ebdae8c194adda Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 10 Jul 2019 16:59:55 +0900 Subject: ASoC: simple_card_utils.h: care NULL dai at asoc_simple_debug_dai() props->xxx_dai might be NULL when DPCM. This patch cares it for debug. Fixes: commit 0580dde59438 ("ASoC: simple-card-utils: add asoc_simple_debug_info()") Signed-off-by: Kuninori Morimoto Link: https://lore.kernel.org/r/87o922gw4u.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown --- include/sound/simple_card_utils.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/sound/simple_card_utils.h b/include/sound/simple_card_utils.h index 954563ee2277..985a5f583de4 100644 --- a/include/sound/simple_card_utils.h +++ b/include/sound/simple_card_utils.h @@ -141,6 +141,10 @@ inline void asoc_simple_debug_dai(struct asoc_simple_priv *priv, { struct device *dev = simple_priv_to_dev(priv); + /* dai might be NULL */ + if (!dai) + return; + if (dai->name) dev_dbg(dev, "%s dai name = %s\n", name, dai->name); -- cgit From 794fcee8da3c0c8a01b08ecad1c181cb0a622868 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 10 Jul 2019 17:01:12 +0900 Subject: ASoC: simple-card-utils: care no Platform for DPCM commit 34614739988ad ("ASoC: soc-core: support dai_link with platforms_num != 1") supports multi Platform, and commit 9f3eb91753451 ("ASoC: simple-card-utils: consider CPU-Platform possibility") removed no Platform from simple-card. Multi Platform is now checking both Platform name/of_node are NULL case. But in normal case, DPCM be doesn't have Platform. asoc_simple_canonicalize_platform() try to use CPU of_node to Platform (This is needed for DMAEngine platform case), but it still might be NULL at DPCM be. This patch try to use no Platform after that if Platform of_node is still NULL. It can't probe without this patch. Signed-off-by: Kuninori Morimoto Link: https://lore.kernel.org/r/87muhmgw2o.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown --- sound/soc/generic/simple-card-utils.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c index ac8678fe55ff..556b1a789629 100644 --- a/sound/soc/generic/simple-card-utils.c +++ b/sound/soc/generic/simple-card-utils.c @@ -349,6 +349,13 @@ void asoc_simple_canonicalize_platform(struct snd_soc_dai_link *dai_link) /* Assumes platform == cpu */ if (!dai_link->platforms->of_node) dai_link->platforms->of_node = dai_link->cpus->of_node; + + /* + * DPCM BE can be no platform. + * Alloced memory will be waste, but not leak. + */ + if (!dai_link->platforms->of_node) + dai_link->num_platforms = 0; } EXPORT_SYMBOL_GPL(asoc_simple_canonicalize_platform); -- cgit From 43167bb1f6bb7efa73adc40d2dd700bb6546cc2c Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 9 Jul 2019 13:26:31 -0600 Subject: spi: dt-bindings: spi-controller: remove unnecessary 'maxItems: 1' from reg Mixing array constraints like 'maxItems' and string or integer value constraints like 'minimum' don't make sense. Also, with only value constraints, it is implied we have a single value. So lets remove 'maxItems: 1'. Cc: Mark Brown Cc: linux-spi@vger.kernel.org Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20190709192631.16394-1-robh@kernel.org Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/spi-controller.yaml | 1 - 1 file changed, 1 deletion(-) diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 876c0623f322..a02e2fe2bfb2 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -73,7 +73,6 @@ patternProperties: Compatible of the SPI device. reg: - maxItems: 1 minimum: 0 maximum: 256 description: -- cgit From d6b197a14863818a7ed7890e91f043fab49e8c60 Mon Sep 17 00:00:00 2001 From: Han Xu Date: Wed, 10 Jul 2019 10:31:27 +0800 Subject: spi: spi-fsl-qspi: change i.MX7D RX FIFO size The RX FIFO should be 128 byte rather than 512 byte. It's a typo on reference manual. Signed-off-by: Han Xu Link: https://lore.kernel.org/r/20190710023128.13115-3-han.xu@nxp.com Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-qspi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c index 41a49b93ca60..448c00e4065b 100644 --- a/drivers/spi/spi-fsl-qspi.c +++ b/drivers/spi/spi-fsl-qspi.c @@ -206,7 +206,7 @@ static const struct fsl_qspi_devtype_data imx6sx_data = { }; static const struct fsl_qspi_devtype_data imx7d_data = { - .rxfifo = SZ_512, + .rxfifo = SZ_128, .txfifo = SZ_512, .ahb_buf_size = SZ_1K, .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK, -- cgit From 724808ad556c15e9473418d082f8aae81dd267f6 Mon Sep 17 00:00:00 2001 From: Wen Yang Date: Wed, 10 Jul 2019 15:25:06 +0800 Subject: ASoC: simple-card: fix an use-after-free in simple_dai_link_of_dpcm() The node variable is still being used after the of_node_put() call, which may result in use-after-free. Fixes: cfc652a73331 ("ASoC: simple-card: tidyup prefix for snd_soc_codec_conf") Link: https://lore.kernel.org/r/1562743509-30496-2-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Wen Yang Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/generic/simple-card.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index e5cde0d5e63c..4117e54884e5 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -124,8 +124,6 @@ static int simple_dai_link_of_dpcm(struct asoc_simple_priv *priv, li->link++; - of_node_put(node); - /* For single DAI link & old style of DT node */ if (is_top) prefix = PREFIX; @@ -147,17 +145,17 @@ static int simple_dai_link_of_dpcm(struct asoc_simple_priv *priv, ret = asoc_simple_parse_cpu(np, dai_link, &is_single_links); if (ret) - return ret; + goto out_put_node; ret = asoc_simple_parse_clk_cpu(dev, np, dai_link, dai); if (ret < 0) - return ret; + goto out_put_node; ret = asoc_simple_set_dailink_name(dev, dai_link, "fe.%s", cpus->dai_name); if (ret < 0) - return ret; + goto out_put_node; asoc_simple_canonicalize_cpu(dai_link, is_single_links); } else { @@ -180,17 +178,17 @@ static int simple_dai_link_of_dpcm(struct asoc_simple_priv *priv, ret = asoc_simple_parse_codec(np, dai_link); if (ret < 0) - return ret; + goto out_put_node; ret = asoc_simple_parse_clk_codec(dev, np, dai_link, dai); if (ret < 0) - return ret; + goto out_put_node; ret = asoc_simple_set_dailink_name(dev, dai_link, "be.%s", codecs->dai_name); if (ret < 0) - return ret; + goto out_put_node; /* check "prefix" from top node */ snd_soc_of_parse_node_prefix(top, cconf, codecs->of_node, @@ -208,19 +206,21 @@ static int simple_dai_link_of_dpcm(struct asoc_simple_priv *priv, ret = asoc_simple_parse_tdm(np, dai); if (ret) - return ret; + goto out_put_node; ret = asoc_simple_parse_daifmt(dev, node, codec, prefix, &dai_link->dai_fmt); if (ret < 0) - return ret; + goto out_put_node; dai_link->dpcm_playback = 1; dai_link->dpcm_capture = 1; dai_link->ops = &simple_ops; dai_link->init = asoc_simple_dai_init; - return 0; +out_put_node: + of_node_put(node); + return ret; } static int simple_dai_link_of(struct asoc_simple_priv *priv, -- cgit From 27862d5a3325bc531ec15e3c607e44aa0fd57f6f Mon Sep 17 00:00:00 2001 From: Wen Yang Date: Wed, 10 Jul 2019 15:25:07 +0800 Subject: ASoC: simple-card: fix an use-after-free in simple_for_each_link() The codec variable is still being used after the of_node_put() call, which may result in use-after-free. Fixes: d947cdfd4be2 ("ASoC: simple-card: cleanup DAI link loop method - step1") Link: https://lore.kernel.org/r/1562743509-30496-3-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Wen Yang Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/generic/simple-card.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index 4117e54884e5..ef849151ba56 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -364,8 +364,6 @@ static int simple_for_each_link(struct asoc_simple_priv *priv, goto error; } - of_node_put(codec); - /* get convert-xxx property */ memset(&adata, 0, sizeof(adata)); for_each_child_of_node(node, np) @@ -387,11 +385,13 @@ static int simple_for_each_link(struct asoc_simple_priv *priv, ret = func_noml(priv, np, codec, li, is_top); if (ret < 0) { + of_node_put(codec); of_node_put(np); goto error; } } + of_node_put(codec); node = of_get_next_child(top, node); } while (!is_top && node); -- cgit From aa2e362cb6b3f5ca88093ada01e1a0ace8a517b2 Mon Sep 17 00:00:00 2001 From: Wen Yang Date: Wed, 10 Jul 2019 15:25:08 +0800 Subject: ASoC: audio-graph-card: fix use-after-free in graph_dai_link_of_dpcm() After calling of_node_put() on the ports, port, and node variables, they are still being used, which may result in use-after-free. Fix this issue by calling of_node_put() after the last usage. Fixes: dd98fbc558a0 ("ASoC: audio-graph-card: cleanup DAI link loop method - step1") Link: https://lore.kernel.org/r/1562743509-30496-4-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Wen Yang Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/generic/audio-graph-card.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c index e438011f5e45..bddfcfd7bedf 100644 --- a/sound/soc/generic/audio-graph-card.c +++ b/sound/soc/generic/audio-graph-card.c @@ -208,10 +208,6 @@ static int graph_dai_link_of_dpcm(struct asoc_simple_priv *priv, dev_dbg(dev, "link_of DPCM (%pOF)\n", ep); - of_node_put(ports); - of_node_put(port); - of_node_put(node); - if (li->cpu) { int is_single_links = 0; @@ -229,17 +225,17 @@ static int graph_dai_link_of_dpcm(struct asoc_simple_priv *priv, ret = asoc_simple_parse_cpu(ep, dai_link, &is_single_links); if (ret) - return ret; + goto out_put_node; ret = asoc_simple_parse_clk_cpu(dev, ep, dai_link, dai); if (ret < 0) - return ret; + goto out_put_node; ret = asoc_simple_set_dailink_name(dev, dai_link, "fe.%s", cpus->dai_name); if (ret < 0) - return ret; + goto out_put_node; /* card->num_links includes Codec */ asoc_simple_canonicalize_cpu(dai_link, is_single_links); @@ -263,17 +259,17 @@ static int graph_dai_link_of_dpcm(struct asoc_simple_priv *priv, ret = asoc_simple_parse_codec(ep, dai_link); if (ret < 0) - return ret; + goto out_put_node; ret = asoc_simple_parse_clk_codec(dev, ep, dai_link, dai); if (ret < 0) - return ret; + goto out_put_node; ret = asoc_simple_set_dailink_name(dev, dai_link, "be.%s", codecs->dai_name); if (ret < 0) - return ret; + goto out_put_node; /* check "prefix" from top node */ snd_soc_of_parse_node_prefix(top, cconf, codecs->of_node, @@ -293,19 +289,23 @@ static int graph_dai_link_of_dpcm(struct asoc_simple_priv *priv, ret = asoc_simple_parse_tdm(ep, dai); if (ret) - return ret; + goto out_put_node; ret = asoc_simple_parse_daifmt(dev, cpu_ep, codec_ep, NULL, &dai_link->dai_fmt); if (ret < 0) - return ret; + goto out_put_node; dai_link->dpcm_playback = 1; dai_link->dpcm_capture = 1; dai_link->ops = &graph_ops; dai_link->init = asoc_simple_dai_init; - return 0; +out_put_node: + of_node_put(ports); + of_node_put(port); + of_node_put(node); + return ret; } static int graph_dai_link_of(struct asoc_simple_priv *priv, -- cgit From c152f8491a8d9a4b25afd65a86eb5e55e2a8c380 Mon Sep 17 00:00:00 2001 From: Wen Yang Date: Wed, 10 Jul 2019 15:25:09 +0800 Subject: ASoC: audio-graph-card: fix an use-after-free in graph_get_dai_id() After calling of_node_put() on the node variable, it is still being used, which may result in use-after-free. Fix this issue by calling of_node_put() after the last usage. Fixes: a0c426fe1433 ("ASoC: simple-card-utils: check "reg" property on asoc_simple_card_get_dai_id()") Link: https://lore.kernel.org/r/1562743509-30496-5-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Wen Yang Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/generic/audio-graph-card.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c index bddfcfd7bedf..343ede8042c3 100644 --- a/sound/soc/generic/audio-graph-card.c +++ b/sound/soc/generic/audio-graph-card.c @@ -63,6 +63,7 @@ static int graph_get_dai_id(struct device_node *ep) struct device_node *endpoint; struct of_endpoint info; int i, id; + u32 *reg; int ret; /* use driver specified DAI ID if exist */ @@ -83,8 +84,9 @@ static int graph_get_dai_id(struct device_node *ep) return info.id; node = of_get_parent(ep); + reg = of_get_property(node, "reg", NULL); of_node_put(node); - if (of_get_property(node, "reg", NULL)) + if (reg) return info.port; } node = of_graph_get_port_parent(ep); -- cgit From 09297c2f7a5428776369ba3b9904718a358e5559 Mon Sep 17 00:00:00 2001 From: Shuming Fan Date: Thu, 11 Jul 2019 16:22:14 +0800 Subject: ASoC: rt1011: fix DC calibration offset not applying There are two issues to fix: - DC offset calibration data will be reset after stopping playback. - DC offset calibration data should be applied in the initial setting. Signed-off-by: Shuming Fan Link: https://lore.kernel.org/r/20190711082214.8142-1-shumingf@realtek.com Signed-off-by: Mark Brown --- sound/soc/codecs/rt1011.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c index 5605b660f4bf..0a6ff13d76e1 100644 --- a/sound/soc/codecs/rt1011.c +++ b/sound/soc/codecs/rt1011.c @@ -39,7 +39,7 @@ static const struct reg_sequence init_list[] = { { RT1011_POWER_9, 0xa840 }, { RT1011_ADC_SET_5, 0x0a20 }, - { RT1011_DAC_SET_2, 0xa232 }, + { RT1011_DAC_SET_2, 0xa032 }, { RT1011_ADC_SET_1, 0x2925 }, { RT1011_SPK_PRO_DC_DET_1, 0xb00c }, @@ -1917,7 +1917,7 @@ static int rt1011_set_bias_level(struct snd_soc_component *component, snd_soc_component_write(component, RT1011_SYSTEM_RESET_2, 0x0000); snd_soc_component_write(component, - RT1011_SYSTEM_RESET_3, 0x0000); + RT1011_SYSTEM_RESET_3, 0x0001); snd_soc_component_write(component, RT1011_SYSTEM_RESET_1, 0x003f); snd_soc_component_write(component, -- cgit From ec3042ad39d4e2ddbc3a3344f90bb10d8feb53bc Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 11 Jul 2019 13:10:45 +0900 Subject: ASoC: audio-graph-card: add missing const at graph_get_dai_id() commit c152f8491a8d9 ("ASoC: audio-graph-card: fix an use-after-free in graph_get_dai_id()") fixups use-after-free issue, but, it need to use "const" for reg. This patch adds it. We will have below without this patch LINUX/sound/soc/generic/audio-graph-card.c: In function 'graph_get_dai_id': LINUX/sound/soc/generic/audio-graph-card.c:87:7: warning: assignment discards\ 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] reg = of_get_property(node, "reg", NULL); Fixes: c152f8491a8d9 ("ASoC: audio-graph-card: fix an use-after-free in graph_get_dai_id()") Signed-off-by: Kuninori Morimoto Acked-by: Wen Yang Link: https://lore.kernel.org/r/87sgrd43ja.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown --- sound/soc/generic/audio-graph-card.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c index 343ede8042c3..ebf2ca3249cb 100644 --- a/sound/soc/generic/audio-graph-card.c +++ b/sound/soc/generic/audio-graph-card.c @@ -63,7 +63,7 @@ static int graph_get_dai_id(struct device_node *ep) struct device_node *endpoint; struct of_endpoint info; int i, id; - u32 *reg; + const u32 *reg; int ret; /* use driver specified DAI ID if exist */ -- cgit From a1f32eeca60e74f6f103ce74f586570deddaef7a Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Mon, 1 Jul 2019 13:26:28 -0700 Subject: f2fs: use generic checking and prep function for FS_IOC_SETFLAGS Make the f2fs implementation of FS_IOC_SETFLAGS use the new VFS helper function vfs_ioc_setflags_prepare(). This is based on a patch from Darrick Wong, but reworked to apply after commit 360985573b55 ("f2fs: separate f2fs i_flags from fs_flags and ext4 i_flags"). Originally-from: Darrick J. Wong Signed-off-by: Eric Biggers Reviewed-by: Chao Yu Reviewed-by: Darrick J. Wong Signed-off-by: Jaegeuk Kim --- fs/f2fs/file.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index f8d46df8fa9e..b7aa0144d874 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -1770,7 +1770,8 @@ static int f2fs_ioc_getflags(struct file *filp, unsigned long arg) static int f2fs_ioc_setflags(struct file *filp, unsigned long arg) { struct inode *inode = file_inode(filp); - u32 fsflags; + struct f2fs_inode_info *fi = F2FS_I(inode); + u32 fsflags, old_fsflags; u32 iflags; int ret; @@ -1794,8 +1795,14 @@ static int f2fs_ioc_setflags(struct file *filp, unsigned long arg) inode_lock(inode); + old_fsflags = f2fs_iflags_to_fsflags(fi->i_flags); + ret = vfs_ioc_setflags_prepare(inode, old_fsflags, fsflags); + if (ret) + goto out; + ret = f2fs_setflags_common(inode, iflags, f2fs_fsflags_to_iflags(F2FS_SETTABLE_FS_FL)); +out: inode_unlock(inode); mnt_drop_write_file(filp); return ret; -- cgit From 6fc93c4e0ad12e34475755315749143013c702ab Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Mon, 1 Jul 2019 13:26:29 -0700 Subject: f2fs: use generic checking function for FS_IOC_FSSETXATTR Make the f2fs implementation of FS_IOC_FSSETXATTR use the new VFS helper function vfs_ioc_fssetxattr_check(), and remove the project quota check since it's now done by the helper function. This is based on a patch from Darrick Wong, but reworked to apply after commit 360985573b55 ("f2fs: separate f2fs i_flags from fs_flags and ext4 i_flags"). Originally-from: Darrick J. Wong Signed-off-by: Eric Biggers Reviewed-by: Chao Yu Reviewed-by: Darrick J. Wong Signed-off-by: Jaegeuk Kim --- fs/f2fs/file.c | 45 ++++++++++++++------------------------------- 1 file changed, 14 insertions(+), 31 deletions(-) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index b7aa0144d874..717bad8d31b0 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -2862,52 +2862,32 @@ static inline u32 f2fs_xflags_to_iflags(u32 xflags) return iflags; } -static int f2fs_ioc_fsgetxattr(struct file *filp, unsigned long arg) +static void f2fs_fill_fsxattr(struct inode *inode, struct fsxattr *fa) { - struct inode *inode = file_inode(filp); struct f2fs_inode_info *fi = F2FS_I(inode); - struct fsxattr fa; - memset(&fa, 0, sizeof(struct fsxattr)); - fa.fsx_xflags = f2fs_iflags_to_xflags(fi->i_flags); + simple_fill_fsxattr(fa, f2fs_iflags_to_xflags(fi->i_flags)); if (f2fs_sb_has_project_quota(F2FS_I_SB(inode))) - fa.fsx_projid = (__u32)from_kprojid(&init_user_ns, - fi->i_projid); - - if (copy_to_user((struct fsxattr __user *)arg, &fa, sizeof(fa))) - return -EFAULT; - return 0; + fa->fsx_projid = from_kprojid(&init_user_ns, fi->i_projid); } -static int f2fs_ioctl_check_project(struct inode *inode, struct fsxattr *fa) +static int f2fs_ioc_fsgetxattr(struct file *filp, unsigned long arg) { - /* - * Project Quota ID state is only allowed to change from within the init - * namespace. Enforce that restriction only if we are trying to change - * the quota ID state. Everything else is allowed in user namespaces. - */ - if (current_user_ns() == &init_user_ns) - return 0; - - if (__kprojid_val(F2FS_I(inode)->i_projid) != fa->fsx_projid) - return -EINVAL; + struct inode *inode = file_inode(filp); + struct fsxattr fa; - if (F2FS_I(inode)->i_flags & F2FS_PROJINHERIT_FL) { - if (!(fa->fsx_xflags & FS_XFLAG_PROJINHERIT)) - return -EINVAL; - } else { - if (fa->fsx_xflags & FS_XFLAG_PROJINHERIT) - return -EINVAL; - } + f2fs_fill_fsxattr(inode, &fa); + if (copy_to_user((struct fsxattr __user *)arg, &fa, sizeof(fa))) + return -EFAULT; return 0; } static int f2fs_ioc_fssetxattr(struct file *filp, unsigned long arg) { struct inode *inode = file_inode(filp); - struct fsxattr fa; + struct fsxattr fa, old_fa; u32 iflags; int err; @@ -2930,9 +2910,12 @@ static int f2fs_ioc_fssetxattr(struct file *filp, unsigned long arg) return err; inode_lock(inode); - err = f2fs_ioctl_check_project(inode, &fa); + + f2fs_fill_fsxattr(inode, &old_fa); + err = vfs_ioc_fssetxattr_check(inode, &old_fa, &fa); if (err) goto out; + err = f2fs_setflags_common(inode, iflags, f2fs_xflags_to_iflags(F2FS_SUPPORTED_XFLAGS)); if (err) -- cgit From d5e5efa250cd644896f541551610fe7f0de35e0a Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Mon, 1 Jul 2019 13:26:30 -0700 Subject: f2fs: remove redundant check from f2fs_setflags_common() Now that f2fs_ioc_setflags() and f2fs_ioc_fssetxattr() call the VFS helper functions which check for permission to change the immutable and append-only flags, it's no longer needed to do this check in f2fs_setflags_common() too. So remove it. This is based on a patch from Darrick Wong, but reworked to apply after commit 360985573b55 ("f2fs: separate f2fs i_flags from fs_flags and ext4 i_flags"). Originally-from: Darrick J. Wong Signed-off-by: Eric Biggers Reviewed-by: Chao Yu Reviewed-by: Darrick J. Wong Signed-off-by: Jaegeuk Kim --- fs/f2fs/file.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index 717bad8d31b0..3e58a6f697dd 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -1653,19 +1653,12 @@ static int f2fs_file_flush(struct file *file, fl_owner_t id) static int f2fs_setflags_common(struct inode *inode, u32 iflags, u32 mask) { struct f2fs_inode_info *fi = F2FS_I(inode); - u32 oldflags; /* Is it quota file? Do not allow user to mess with it */ if (IS_NOQUOTA(inode)) return -EPERM; - oldflags = fi->i_flags; - - if ((iflags ^ oldflags) & (F2FS_APPEND_FL | F2FS_IMMUTABLE_FL)) - if (!capable(CAP_LINUX_IMMUTABLE)) - return -EPERM; - - fi->i_flags = iflags | (oldflags & ~mask); + fi->i_flags = iflags | (fi->i_flags & ~mask); if (fi->i_flags & F2FS_PROJINHERIT_FL) set_inode_flag(inode, FI_PROJ_INHERIT); -- cgit From ae8cc91a7d85e018c0c267f580820b2bb558cd48 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 9 Jul 2019 22:04:17 -0700 Subject: iio: adc: max9611: Fix misuse of GENMASK macro Arguments are supposed to be ordered high then low. Signed-off-by: Joe Perches Fixes: 69780a3bbc0b ("iio: adc: Add Maxim max9611 ADC driver") Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/max9611.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/max9611.c b/drivers/iio/adc/max9611.c index 917223d5ff5b..0e3c6529fc4c 100644 --- a/drivers/iio/adc/max9611.c +++ b/drivers/iio/adc/max9611.c @@ -83,7 +83,7 @@ #define MAX9611_TEMP_MAX_POS 0x7f80 #define MAX9611_TEMP_MAX_NEG 0xff80 #define MAX9611_TEMP_MIN_NEG 0xd980 -#define MAX9611_TEMP_MASK GENMASK(7, 15) +#define MAX9611_TEMP_MASK GENMASK(15, 7) #define MAX9611_TEMP_SHIFT 0x07 #define MAX9611_TEMP_RAW(_r) ((_r) >> MAX9611_TEMP_SHIFT) #define MAX9611_TEMP_SCALE_NUM 1000000 -- cgit From 5a304e1a4ea000177cf25f5ecf26e786dda25b98 Mon Sep 17 00:00:00 2001 From: Maarten ter Huurne Date: Thu, 4 Jul 2019 19:36:56 +0200 Subject: IIO: Ingenic JZ47xx: Set clock divider on probe The SADC component can run at up to 8 MHz on JZ4725B, but is fed a 12 MHz input clock (EXT). Divide it by two to get 6 MHz, then set up another divider to match, to produce a 10us clock. If the clock dividers are left on their power-on defaults (a divider of 1), the SADC mostly works, but will occasionally produce erroneous readings. This led to button presses being detected out of nowhere on the RS90 every few minutes. With this change, no ghost button presses were logged in almost a day worth of testing. The ADCLK register for configuring clock dividers doesn't exist on JZ4740, so avoid writing it there. A function has been introduced rather than a flag because there is a lot of variation between the ADCLK registers on JZ47xx SoCs, both in the internal layout of the register and in the frequency range supported by the SADC. So this solution should make it easier to add support for other JZ47xx SoCs later. Fixes: 1a78daea107d ("iio: adc: probe should set clock divider") Signed-off-by: Maarten ter Huurne Signed-off-by: Artur Rojek Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/adc/ingenic-adc.c | 54 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c index 92b1d5037ac9..e234970b7150 100644 --- a/drivers/iio/adc/ingenic-adc.c +++ b/drivers/iio/adc/ingenic-adc.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -22,8 +23,11 @@ #define JZ_ADC_REG_ADTCH 0x18 #define JZ_ADC_REG_ADBDAT 0x1c #define JZ_ADC_REG_ADSDAT 0x20 +#define JZ_ADC_REG_ADCLK 0x28 #define JZ_ADC_REG_CFG_BAT_MD BIT(4) +#define JZ_ADC_REG_ADCLK_CLKDIV_LSB 0 +#define JZ_ADC_REG_ADCLK_CLKDIV10US_LSB 16 #define JZ_ADC_AUX_VREF 3300 #define JZ_ADC_AUX_VREF_BITS 12 @@ -34,6 +38,8 @@ #define JZ4740_ADC_BATTERY_HIGH_VREF (7500 * 0.986) #define JZ4740_ADC_BATTERY_HIGH_VREF_BITS 12 +struct ingenic_adc; + struct ingenic_adc_soc_data { unsigned int battery_high_vref; unsigned int battery_high_vref_bits; @@ -41,6 +47,7 @@ struct ingenic_adc_soc_data { size_t battery_raw_avail_size; const int *battery_scale_avail; size_t battery_scale_avail_size; + int (*init_clk_div)(struct device *dev, struct ingenic_adc *adc); }; struct ingenic_adc { @@ -151,6 +158,42 @@ static const int jz4740_adc_battery_scale_avail[] = { JZ_ADC_BATTERY_LOW_VREF, JZ_ADC_BATTERY_LOW_VREF_BITS, }; +static int jz4725b_adc_init_clk_div(struct device *dev, struct ingenic_adc *adc) +{ + struct clk *parent_clk; + unsigned long parent_rate, rate; + unsigned int div_main, div_10us; + + parent_clk = clk_get_parent(adc->clk); + if (!parent_clk) { + dev_err(dev, "ADC clock has no parent\n"); + return -ENODEV; + } + parent_rate = clk_get_rate(parent_clk); + + /* + * The JZ4725B ADC works at 500 kHz to 8 MHz. + * We pick the highest rate possible. + * In practice we typically get 6 MHz, half of the 12 MHz EXT clock. + */ + div_main = DIV_ROUND_UP(parent_rate, 8000000); + div_main = clamp(div_main, 1u, 64u); + rate = parent_rate / div_main; + if (rate < 500000 || rate > 8000000) { + dev_err(dev, "No valid divider for ADC main clock\n"); + return -EINVAL; + } + + /* We also need a divider that produces a 10us clock. */ + div_10us = DIV_ROUND_UP(rate, 100000); + + writel(((div_10us - 1) << JZ_ADC_REG_ADCLK_CLKDIV10US_LSB) | + (div_main - 1) << JZ_ADC_REG_ADCLK_CLKDIV_LSB, + adc->base + JZ_ADC_REG_ADCLK); + + return 0; +} + static const struct ingenic_adc_soc_data jz4725b_adc_soc_data = { .battery_high_vref = JZ4725B_ADC_BATTERY_HIGH_VREF, .battery_high_vref_bits = JZ4725B_ADC_BATTERY_HIGH_VREF_BITS, @@ -158,6 +201,7 @@ static const struct ingenic_adc_soc_data jz4725b_adc_soc_data = { .battery_raw_avail_size = ARRAY_SIZE(jz4725b_adc_battery_raw_avail), .battery_scale_avail = jz4725b_adc_battery_scale_avail, .battery_scale_avail_size = ARRAY_SIZE(jz4725b_adc_battery_scale_avail), + .init_clk_div = jz4725b_adc_init_clk_div, }; static const struct ingenic_adc_soc_data jz4740_adc_soc_data = { @@ -167,6 +211,7 @@ static const struct ingenic_adc_soc_data jz4740_adc_soc_data = { .battery_raw_avail_size = ARRAY_SIZE(jz4740_adc_battery_raw_avail), .battery_scale_avail = jz4740_adc_battery_scale_avail, .battery_scale_avail_size = ARRAY_SIZE(jz4740_adc_battery_scale_avail), + .init_clk_div = NULL, /* no ADCLK register on JZ4740 */ }; static int ingenic_adc_read_avail(struct iio_dev *iio_dev, @@ -317,6 +362,15 @@ static int ingenic_adc_probe(struct platform_device *pdev) return ret; } + /* Set clock dividers. */ + if (soc_data->init_clk_div) { + ret = soc_data->init_clk_div(dev, adc); + if (ret) { + clk_disable_unprepare(adc->clk); + return ret; + } + } + /* Put hardware in a known passive state. */ writeb(0x00, adc->base + JZ_ADC_REG_ENABLE); writeb(0xff, adc->base + JZ_ADC_REG_CTRL); -- cgit From 6cdff99c9f7d7d28b87cf05dd464f7c7736332ae Mon Sep 17 00:00:00 2001 From: Gwendal Grignou Date: Fri, 28 Jun 2019 12:17:09 -0700 Subject: iio: cros_ec_accel_legacy: Fix incorrect channel setting INFO_SCALE is set both for each channel and all channels. iio is using all channel setting, so the error was not user visible. Signed-off-by: Gwendal Grignou Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/cros_ec_accel_legacy.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c index 46bb2e421bb9..ad19d9c716f4 100644 --- a/drivers/iio/accel/cros_ec_accel_legacy.c +++ b/drivers/iio/accel/cros_ec_accel_legacy.c @@ -319,7 +319,6 @@ static const struct iio_chan_spec_ext_info cros_ec_accel_legacy_ext_info[] = { .modified = 1, \ .info_mask_separate = \ BIT(IIO_CHAN_INFO_RAW) | \ - BIT(IIO_CHAN_INFO_SCALE) | \ BIT(IIO_CHAN_INFO_CALIBBIAS), \ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SCALE), \ .ext_info = cros_ec_accel_legacy_ext_info, \ -- cgit From 1244a720572fd1680ac8d6b8a4235f2e8557b810 Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Maneyrol Date: Thu, 27 Jun 2019 13:19:53 +0000 Subject: iio: imu: mpu6050: add missing available scan masks Driver only supports 3-axis gyro and/or 3-axis accel. For icm20602, temp data is mandatory for all configurations. Fix all single and double axis configurations (almost never used) and more importantly fix 3-axis gyro and 6-axis accel+gyro buffer on icm20602 when temp data is not enabled. Signed-off-by: Jean-Baptiste Maneyrol Fixes: 1615fe41a195 ("iio: imu: mpu6050: Fix FIFO layout for ICM20602") Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 43 ++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index 53a59957cc54..8a704cd5bddb 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -845,6 +845,25 @@ static const struct iio_chan_spec inv_mpu_channels[] = { INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z), }; +static const unsigned long inv_mpu_scan_masks[] = { + /* 3-axis accel */ + BIT(INV_MPU6050_SCAN_ACCL_X) + | BIT(INV_MPU6050_SCAN_ACCL_Y) + | BIT(INV_MPU6050_SCAN_ACCL_Z), + /* 3-axis gyro */ + BIT(INV_MPU6050_SCAN_GYRO_X) + | BIT(INV_MPU6050_SCAN_GYRO_Y) + | BIT(INV_MPU6050_SCAN_GYRO_Z), + /* 6-axis accel + gyro */ + BIT(INV_MPU6050_SCAN_ACCL_X) + | BIT(INV_MPU6050_SCAN_ACCL_Y) + | BIT(INV_MPU6050_SCAN_ACCL_Z) + | BIT(INV_MPU6050_SCAN_GYRO_X) + | BIT(INV_MPU6050_SCAN_GYRO_Y) + | BIT(INV_MPU6050_SCAN_GYRO_Z), + 0, +}; + static const struct iio_chan_spec inv_icm20602_channels[] = { IIO_CHAN_SOFT_TIMESTAMP(INV_ICM20602_SCAN_TIMESTAMP), { @@ -871,6 +890,28 @@ static const struct iio_chan_spec inv_icm20602_channels[] = { INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_ICM20602_SCAN_ACCL_Z), }; +static const unsigned long inv_icm20602_scan_masks[] = { + /* 3-axis accel + temp (mandatory) */ + BIT(INV_ICM20602_SCAN_ACCL_X) + | BIT(INV_ICM20602_SCAN_ACCL_Y) + | BIT(INV_ICM20602_SCAN_ACCL_Z) + | BIT(INV_ICM20602_SCAN_TEMP), + /* 3-axis gyro + temp (mandatory) */ + BIT(INV_ICM20602_SCAN_GYRO_X) + | BIT(INV_ICM20602_SCAN_GYRO_Y) + | BIT(INV_ICM20602_SCAN_GYRO_Z) + | BIT(INV_ICM20602_SCAN_TEMP), + /* 6-axis accel + gyro + temp (mandatory) */ + BIT(INV_ICM20602_SCAN_ACCL_X) + | BIT(INV_ICM20602_SCAN_ACCL_Y) + | BIT(INV_ICM20602_SCAN_ACCL_Z) + | BIT(INV_ICM20602_SCAN_GYRO_X) + | BIT(INV_ICM20602_SCAN_GYRO_Y) + | BIT(INV_ICM20602_SCAN_GYRO_Z) + | BIT(INV_ICM20602_SCAN_TEMP), + 0, +}; + /* * The user can choose any frequency between INV_MPU6050_MIN_FIFO_RATE and * INV_MPU6050_MAX_FIFO_RATE, but only these frequencies are matched by the @@ -1130,9 +1171,11 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, if (chip_type == INV_ICM20602) { indio_dev->channels = inv_icm20602_channels; indio_dev->num_channels = ARRAY_SIZE(inv_icm20602_channels); + indio_dev->available_scan_masks = inv_icm20602_scan_masks; } else { indio_dev->channels = inv_mpu_channels; indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels); + indio_dev->available_scan_masks = inv_mpu_scan_masks; } indio_dev->info = &mpu_info; -- cgit From 1ef55fed9219963359a7b3bc7edca8517c6e45ac Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Sat, 13 Jul 2019 11:07:16 +0200 Subject: regulator: axp20x: fix DCDCA and DCDCD for AXP806 Refactoring of the driver introduced bugs in AXP806's DCDCA and DCDCD regulator definitions. In DCDCA case, AXP806_DCDCA_1120mV_STEPS was obtained by subtracting 0x47 and 0x33. This should be 0x14 (hex) and not 14 (dec). In DCDCD case, axp806_dcdcd_ranges[] contains two ranges with same start and end macros, which is clearly wrong. Second range starts at 1.6V so it should use AXP806_DCDCD_1600mV_[START|END] macros. They are already defined but unused. Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks") Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20190713090717.347-2-jernej.skrabec@siol.net Signed-off-by: Mark Brown --- drivers/regulator/axp20x-regulator.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 152053361862..c951568994a1 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -240,7 +240,7 @@ #define AXP806_DCDCA_600mV_END \ (AXP806_DCDCA_600mV_START + AXP806_DCDCA_600mV_STEPS) #define AXP806_DCDCA_1120mV_START 0x33 -#define AXP806_DCDCA_1120mV_STEPS 14 +#define AXP806_DCDCA_1120mV_STEPS 20 #define AXP806_DCDCA_1120mV_END \ (AXP806_DCDCA_1120mV_START + AXP806_DCDCA_1120mV_STEPS) #define AXP806_DCDCA_NUM_VOLTAGES 72 @@ -774,8 +774,8 @@ static const struct regulator_linear_range axp806_dcdcd_ranges[] = { AXP806_DCDCD_600mV_END, 20000), REGULATOR_LINEAR_RANGE(1600000, - AXP806_DCDCD_600mV_START, - AXP806_DCDCD_600mV_END, + AXP806_DCDCD_1600mV_START, + AXP806_DCDCD_1600mV_END, 100000), }; -- cgit From 8f46e22b5ac692b48d04bb722547ca17b66dda02 Mon Sep 17 00:00:00 2001 From: Jernej Skrabec Date: Sat, 13 Jul 2019 11:07:17 +0200 Subject: regulator: axp20x: fix DCDC5 and DCDC6 for AXP803 Refactoring of axp20x driver introduced a bug in AXP803's DCDC6 regulator definition. AXP803_DCDC6_1120mV_STEPS was obtained by subtracting 0x47 and 0x33. This should be 0x14 (hex) and not 14 (dec). Refactoring also carried over a bug in DCDC5 regulator definition. Number of possible voltages must be for 1 bigger than maximum valid voltage index, because 0 is also valid and it means lowest voltage. Fixes: 1dbe0ccb0631 ("regulator: axp20x-regulator: add support for AXP803") Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks") Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20190713090717.347-3-jernej.skrabec@siol.net Signed-off-by: Mark Brown --- drivers/regulator/axp20x-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index c951568994a1..989506bd90b1 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -174,14 +174,14 @@ #define AXP803_DCDC5_1140mV_STEPS 35 #define AXP803_DCDC5_1140mV_END \ (AXP803_DCDC5_1140mV_START + AXP803_DCDC5_1140mV_STEPS) -#define AXP803_DCDC5_NUM_VOLTAGES 68 +#define AXP803_DCDC5_NUM_VOLTAGES 69 #define AXP803_DCDC6_600mV_START 0x00 #define AXP803_DCDC6_600mV_STEPS 50 #define AXP803_DCDC6_600mV_END \ (AXP803_DCDC6_600mV_START + AXP803_DCDC6_600mV_STEPS) #define AXP803_DCDC6_1120mV_START 0x33 -#define AXP803_DCDC6_1120mV_STEPS 14 +#define AXP803_DCDC6_1120mV_STEPS 20 #define AXP803_DCDC6_1120mV_END \ (AXP803_DCDC6_1120mV_START + AXP803_DCDC6_1120mV_STEPS) #define AXP803_DCDC6_NUM_VOLTAGES 72 -- cgit From 9b6d104a6b150bd4d3e5b039340e1f6b20c2e3c1 Mon Sep 17 00:00:00 2001 From: Wen Yang Date: Sat, 13 Jul 2019 11:46:14 +0800 Subject: ASoC: samsung: odroid: fix an use-after-free issue for codec The codec variable is still being used after the of_node_put() call, which may result in use-after-free. Fixes: bc3cf17b575a ("ASoC: samsung: odroid: Add support for secondary CPU DAI") Signed-off-by: Wen Yang Cc: Krzysztof Kozlowski Cc: Sangbeom Kim Cc: Sylwester Nawrocki Cc: Liam Girdwood Cc: Mark Brown Cc: Jaroslav Kysela Cc: Takashi Iwai Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/1562989575-33785-2-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Mark Brown --- sound/soc/samsung/odroid.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/samsung/odroid.c b/sound/soc/samsung/odroid.c index dfb6e460e7eb..64ebe895cdd7 100644 --- a/sound/soc/samsung/odroid.c +++ b/sound/soc/samsung/odroid.c @@ -284,9 +284,8 @@ static int odroid_audio_probe(struct platform_device *pdev) } of_node_put(cpu); - of_node_put(codec); if (ret < 0) - return ret; + goto err_put_node; ret = snd_soc_of_get_dai_link_codecs(dev, codec, codec_link); if (ret < 0) @@ -317,6 +316,7 @@ static int odroid_audio_probe(struct platform_device *pdev) goto err_put_clk_i2s; } + of_node_put(codec); return 0; err_put_clk_i2s: @@ -326,6 +326,8 @@ err_put_sclk: err_put_cpu_dai: of_node_put(cpu_dai); snd_soc_of_put_dai_link_codecs(codec_link); +err_put_node: + of_node_put(codec); return ret; } -- cgit From 2abee12c0ab1924a69993d2c063a39a952e7d836 Mon Sep 17 00:00:00 2001 From: Wen Yang Date: Sat, 13 Jul 2019 11:46:15 +0800 Subject: ASoC: samsung: odroid: fix a double-free issue for cpu_dai The cpu_dai variable is still being used after the of_node_put() call, which may result in double-free: of_node_put(cpu_dai); ---> released here ret = devm_snd_soc_register_card(dev, card); if (ret < 0) { ... goto err_put_clk_i2s; --> jump to err_put_clk_i2s ... err_put_clk_i2s: clk_put(priv->clk_i2s_bus); err_put_sclk: clk_put(priv->sclk_i2s); err_put_cpu_dai: of_node_put(cpu_dai); --> double-free here Fixes: d832d2b246c5 ("ASoC: samsung: odroid: Fix of_node refcount unbalance") Signed-off-by: Wen Yang Cc: Krzysztof Kozlowski Cc: Sangbeom Kim Cc: Sylwester Nawrocki Cc: Liam Girdwood Cc: Mark Brown Cc: Jaroslav Kysela Cc: Takashi Iwai Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/1562989575-33785-3-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Mark Brown --- sound/soc/samsung/odroid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/samsung/odroid.c b/sound/soc/samsung/odroid.c index 64ebe895cdd7..f0f5fa9c27d3 100644 --- a/sound/soc/samsung/odroid.c +++ b/sound/soc/samsung/odroid.c @@ -308,7 +308,6 @@ static int odroid_audio_probe(struct platform_device *pdev) ret = PTR_ERR(priv->clk_i2s_bus); goto err_put_sclk; } - of_node_put(cpu_dai); ret = devm_snd_soc_register_card(dev, card); if (ret < 0) { @@ -316,6 +315,7 @@ static int odroid_audio_probe(struct platform_device *pdev) goto err_put_clk_i2s; } + of_node_put(cpu_dai); of_node_put(codec); return 0; -- cgit From aa2ba991c4206d5b778dcaa7b4997396e79f8e90 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 12 Jul 2019 13:27:08 +0200 Subject: ASoC: Intel: bytcht_es8316: Add quirk for Irbis NB41 netbook The Irbis NB41 netbook has its internal mic on IN2, inverted jack-detect and stereo speakers, add a quirk for this. Cc: russianneuromancer@ya.ru Reported-and-tested-by: russianneuromancer@ya.ru Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20190712112708.25327-1-hdegoede@redhat.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcht_es8316.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index fac09be3cade..46612331f5ea 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -437,6 +437,14 @@ static const struct acpi_gpio_mapping byt_cht_es8316_gpios[] = { /* Please keep this list alphabetically sorted */ static const struct dmi_system_id byt_cht_es8316_quirk_table[] = { + { /* Irbis NB41 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "IRBIS"), + DMI_MATCH(DMI_PRODUCT_NAME, "NB41"), + }, + .driver_data = (void *)(BYT_CHT_ES8316_INTMIC_IN2_MAP + | BYT_CHT_ES8316_JD_INVERTED), + }, { /* Teclast X98 Plus II */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TECLAST"), -- cgit From 600ea54dbaecdf3f68ec52b8d027bacbebf27d92 Mon Sep 17 00:00:00 2001 From: Filipe Laíns Date: Tue, 16 Jul 2019 08:36:21 +0100 Subject: HID: logitech-dj: rename "gaming" receiver to "lightspeed" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This should help people identify the receiver. there are several receivers used in gaming mice. the "lightspeed" technology is pretty well advertise so this won't just be an obscure name. Signed-off-by: Filipe Laíns Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 2 +- drivers/hid/hid-logitech-dj.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 0d695f8e1b2c..ab9d382b067d 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -768,7 +768,7 @@ #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER 0xc52f #define USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2 0xc532 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_2 0xc534 -#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_GAMING 0xc539 +#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED 0xc539 #define USB_DEVICE_ID_SPACETRAVELLER 0xc623 #define USB_DEVICE_ID_SPACENAVIGATOR 0xc626 #define USB_DEVICE_ID_DINOVO_DESKTOP 0xc704 diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index 6196217a7d93..4334acb49129 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -1832,9 +1832,9 @@ static const struct hid_device_id logi_dj_receivers[] = { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_2), .driver_data = recvr_type_hidpp}, - { /* Logitech gaming receiver (0xc539) */ + { /* Logitech lightspeed receiver (0xc539) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, - USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_GAMING), + USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED), .driver_data = recvr_type_gaming_hidpp}, { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER), -- cgit From 27fc32fd9417968a459d43d9a7c50fd423d53eb9 Mon Sep 17 00:00:00 2001 From: Filipe Laíns Date: Tue, 16 Jul 2019 08:37:26 +0100 Subject: HID: logitech-hidpp: add USB PID for a few more supported mice MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add more device IDs to logitech-hidpp driver. Signed-off-by: Filipe Laíns Signed-off-by: Jiri Kosina --- drivers/hid/hid-logitech-hidpp.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index e3b6245bf4b2..21268c9fa71a 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -3749,15 +3749,45 @@ static const struct hid_device_id hidpp_devices[] = { { L27MHZ_DEVICE(HID_ANY_ID) }, - { /* Logitech G403 Gaming Mouse over USB */ + { /* Logitech G203/Prodigy Gaming Mouse */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC084) }, + { /* Logitech G302 Gaming Mouse */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC07F) }, + { /* Logitech G303 Gaming Mouse */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC080) }, + { /* Logitech G400 Gaming Mouse */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC07E) }, + { /* Logitech G403 Wireless Gaming Mouse over USB */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC082) }, + { /* Logitech G403 Gaming Mouse */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC083) }, + { /* Logitech G403 Hero Gaming Mouse over USB */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC08F) }, + { /* Logitech G502 Proteus Core Gaming Mouse */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC07D) }, + { /* Logitech G502 Proteus Spectrum Gaming Mouse over USB */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC332) }, + { /* Logitech G502 Hero Gaming Mouse over USB */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC08B) }, { /* Logitech G700 Gaming Mouse over USB */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC06B) }, + { /* Logitech G700s Gaming Mouse over USB */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC07C) }, + { /* Logitech G703 Gaming Mouse over USB */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC087) }, + { /* Logitech G703 Hero Gaming Mouse over USB */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC090) }, { /* Logitech G900 Gaming Mouse over USB */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC081) }, + { /* Logitech G903 Gaming Mouse over USB */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC086) }, + { /* Logitech G903 Hero Gaming Mouse over USB */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC091) }, { /* Logitech G920 Wheel over USB */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G920_WHEEL), .driver_data = HIDPP_QUIRK_CLASS_G920 | HIDPP_QUIRK_FORCE_OUTPUT_REPORTS}, + { /* Logitech G Pro Gaming Mouse over USB */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC088) }, { /* MX5000 keyboard over Bluetooth */ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb305), -- cgit From d79f7badd118e678cf85462df637329aff26e9d5 Mon Sep 17 00:00:00 2001 From: Filipe Laíns Date: Tue, 16 Jul 2019 08:37:47 +0100 Subject: HID: logitech-dj: add the Powerplay receiver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add device ID for Powerplay receiver. Signed-off-by: Filipe Laíns Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-logitech-dj.c | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index ab9d382b067d..884356feb016 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -769,6 +769,7 @@ #define USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2 0xc532 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_2 0xc534 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED 0xc539 +#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY 0xc53a #define USB_DEVICE_ID_SPACETRAVELLER 0xc623 #define USB_DEVICE_ID_SPACENAVIGATOR 0xc626 #define USB_DEVICE_ID_DINOVO_DESKTOP 0xc704 diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index 4334acb49129..d5b47ec1510c 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -1839,6 +1839,10 @@ static const struct hid_device_id logi_dj_receivers[] = { { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER), .driver_data = recvr_type_27mhz}, + { /* Logitech powerplay receiver (0xc53a) */ + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, + USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY), + .driver_data = recvr_type_gaming_hidpp}, { /* Logitech 27 MHz HID++ 1.0 receiver (0xc517) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2), -- cgit From 65f11c72780fa9d598df88def045ccb6a885cf80 Mon Sep 17 00:00:00 2001 From: Ilya Trukhanov Date: Tue, 2 Jul 2019 13:37:16 +0300 Subject: HID: Add 044f:b320 ThrustMaster, Inc. 2 in 1 DT Enable force feedback for the Thrustmaster Dual Trigger 2 in 1 Rumble Force gamepad. Compared to other Thrustmaster devices, left and right rumble motors here are swapped. Signed-off-by: Ilya Trukhanov Signed-off-by: Jiri Kosina --- drivers/hid/hid-tmff.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/hid/hid-tmff.c b/drivers/hid/hid-tmff.c index e12f2588ddeb..bdfc5ff3b2c5 100644 --- a/drivers/hid/hid-tmff.c +++ b/drivers/hid/hid-tmff.c @@ -22,6 +22,8 @@ #include "hid-ids.h" +#define THRUSTMASTER_DEVICE_ID_2_IN_1_DT 0xb320 + static const signed short ff_rumble[] = { FF_RUMBLE, -1 @@ -76,6 +78,7 @@ static int tmff_play(struct input_dev *dev, void *data, struct hid_field *ff_field = tmff->ff_field; int x, y; int left, right; /* Rumbling */ + int motor_swap; switch (effect->type) { case FF_CONSTANT: @@ -100,6 +103,13 @@ static int tmff_play(struct input_dev *dev, void *data, ff_field->logical_minimum, ff_field->logical_maximum); + /* 2-in-1 strong motor is left */ + if (hid->product == THRUSTMASTER_DEVICE_ID_2_IN_1_DT) { + motor_swap = left; + left = right; + right = motor_swap; + } + dbg_hid("(left,right)=(%08x, %08x)\n", left, right); ff_field->value[0] = left; ff_field->value[1] = right; @@ -226,6 +236,8 @@ static const struct hid_device_id tm_devices[] = { .driver_data = (unsigned long)ff_rumble }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304), /* FireStorm Dual Power 2 (and 3) */ .driver_data = (unsigned long)ff_rumble }, + { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, THRUSTMASTER_DEVICE_ID_2_IN_1_DT), /* Dual Trigger 2-in-1 */ + .driver_data = (unsigned long)ff_rumble }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb323), /* Dual Trigger 3-in-1 (PC Mode) */ .driver_data = (unsigned long)ff_rumble }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb324), /* Dual Trigger 3-in-1 (PS3 Mode) */ -- cgit From 64dbc122b20f75183d8822618c24f85144a5a94d Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Mon, 15 Jul 2019 11:51:39 -0500 Subject: x86/entry/64: Use JMP instead of JMPQ Somehow the swapgs mitigation entry code patch ended up with a JMPQ instruction instead of JMP, where only the short jump is needed. Some assembler versions apparently fail to optimize JMPQ into a two-byte JMP when possible, instead always using a 7-byte JMP with relocation. For some reason that makes the entry code explode with a #GP during boot. Change it back to "JMP" as originally intended. Fixes: 18ec54fdd6d1 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations") Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner --- arch/x86/entry/entry_64.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S index 57a0d96d6beb..b043c754d978 100644 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -549,7 +549,7 @@ ENTRY(interrupt_entry) UNWIND_HINT_FUNC movq (%rdi), %rdi - jmpq 2f + jmp 2f 1: FENCE_SWAPGS_KERNEL_ENTRY 2: -- cgit From 2922d1cc1696200a3e1fd6d82a7798fcd2cadf12 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 16 Jul 2019 22:46:51 +0200 Subject: spi: gpio: Add SPI_MASTER_GPIO_SS flag The GPIO SPI master has some code in its local CS callback to set the initial sck GPIO value. This was lost in the commit converting it to use SPI core GPIO handling as this callback isn't called if the internal GPIO handling is active. Add the special SPI_MASTER_GPIO_SS to ascertain it gets called anyway so we get the initial SCK setting right. There is some platform provided GPIO handling there as well but this will be skipped as the cs_gpios will be NULL. My test targets seem not to care about the initial SCK value so I am uncertain if this is a regression, but to preserve the previous semantic we better do this. Cc: Andrey Smirnov Fixes: 249e2632dcd0 ("spi: gpio: Don't request CS GPIO in DT use-case") Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20190716204651.7743-1-linus.walleij@linaro.org Signed-off-by: Mark Brown --- drivers/spi/spi-gpio.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index eca9d52ecf65..9eb82150666e 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -410,6 +410,12 @@ static int spi_gpio_probe(struct platform_device *pdev) bb = &spi_gpio->bitbang; bb->master = master; + /* + * There is some additional business, apart from driving the CS GPIO + * line, that we need to do on selection. This makes the local + * callback for chipselect always get called. + */ + master->flags |= SPI_MASTER_GPIO_SS; bb->chipselect = spi_gpio_chipselect; bb->set_line_direction = spi_gpio_set_direction; -- cgit From a07e3324538a989b7cdbf2c679be6a7f9df2544f Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 13 May 2019 13:47:25 +0200 Subject: MIPS: kernel: only use i8253 clocksource with periodic clockevent i8253 clocksource needs a free running timer. This could only be used, if i8253 clockevent is set up as periodic. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- arch/mips/kernel/i8253.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index 5f209f111e59..df7ddd246eaa 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -32,7 +32,8 @@ void __init setup_pit_timer(void) static int __init init_pit_clocksource(void) { - if (num_possible_cpus() > 1) /* PIT does not scale! */ + if (num_possible_cpus() > 1 || /* PIT does not scale! */ + !clockevent_state_periodic(&i8253_clockevent)) return 0; return clocksource_i8253_init(); -- cgit From b8bea8a5e5d942e62203416ab41edecaed4fda02 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Tue, 16 Jul 2019 10:36:56 +0300 Subject: mips: fix cacheinfo Because CONFIG_OF defined for MIPS, cacheinfo attempts to fill information from DT, ignoring data filled by architecture routine. This leads to error reported cacheinfo: Unable to detect cache hierarchy for CPU 0 Way to fix this provided in commit fac51482577d ("drivers: base: cacheinfo: fix x86 with CONFIG_OF enabled") Utilize same mechanism to report that cacheinfo set by architecture specific function Signed-off-by: Vladimir Kondratiev Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- arch/mips/kernel/cacheinfo.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/kernel/cacheinfo.c b/arch/mips/kernel/cacheinfo.c index 97d5239ca47b..428ef2189203 100644 --- a/arch/mips/kernel/cacheinfo.c +++ b/arch/mips/kernel/cacheinfo.c @@ -80,6 +80,8 @@ static int __populate_cache_leaves(unsigned int cpu) if (c->tcache.waysize) populate_cache(tcache, this_leaf, 3, CACHE_TYPE_UNIFIED); + this_cpu_ci->cpu_map_populated = true; + return 0; } -- cgit From 5bbe54346b539b5938b65d542b6ff5e956c3c08d Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Wed, 17 Jul 2019 19:49:10 +0000 Subject: MIPS: Annotate fall-through in kvm/emulate.c kvm_compute_return_epc contains a switch statement with an intentional fall-through from a case handling jal (jump and link) instructions to one handling j (jump) instructions. With -Wimplicit-fallthrough this triggers a compile error (due to -Werror being enabled for arch/mips). This can be reproduced using malta_kvm_defconfig. Fix this by annotating the intentional fall-through. Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org --- arch/mips/kvm/emulate.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c index e5de6bac8197..754094b40a75 100644 --- a/arch/mips/kvm/emulate.c +++ b/arch/mips/kvm/emulate.c @@ -140,6 +140,7 @@ static int kvm_compute_return_epc(struct kvm_vcpu *vcpu, unsigned long instpc, /* These are unconditional and in j_format. */ case jal_op: arch->gprs[31] = instpc + 8; + /* fall through */ case j_op: epc += 4; epc >>= 28; -- cgit From 2a15d6481741a418837a22df3a440d5bd8b9c412 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Wed, 17 Jul 2019 20:12:23 +0000 Subject: MIPS: Annotate fall-through in Cavium Octeon code There's an intentional switch case fall-through in Cavium Octeon USB code, which triggers compile errors with -Wimplicit-fallthrough due to -Werror being enabled for arch/mips. This can be encountered when building cavium_octeon_defconfig. Fix the build issue by annotating the intentional fall-through. Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org --- arch/mips/cavium-octeon/octeon-usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c index 1f730ded5224..cc88a08bc1f7 100644 --- a/arch/mips/cavium-octeon/octeon-usb.c +++ b/arch/mips/cavium-octeon/octeon-usb.c @@ -398,6 +398,7 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) default: dev_err(dev, "Invalid ref_clk %u, using 100000000 instead\n", clock_rate); + /* fall through */ case 100000000: mpll_mul = 0x19; if (ref_clk_sel < 2) -- cgit From 04efe5911fb30664a56ec63d272a0f39a71545db Mon Sep 17 00:00:00 2001 From: Andrii Nakryiko Date: Fri, 19 Jul 2019 12:32:42 -0700 Subject: libbpf: fix SIGSEGV when BTF loading fails, but .BTF.ext exists In case when BTF loading fails despite sanitization, but BPF object has .BTF.ext loaded as well, we free and null obj->btf, but not obj->btf_ext. This leads to an attempt to relocate .BTF.ext later on during bpf_object__load(), which assumes obj->btf is present. This leads to SIGSEGV on null pointer access. Fix bug by freeing and nulling obj->btf_ext as well. Signed-off-by: Andrii Nakryiko Signed-off-by: Alexei Starovoitov --- tools/lib/bpf/libbpf.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index 794dd5064ae8..87168f21ef43 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -1500,6 +1500,12 @@ static int bpf_object__sanitize_and_load_btf(struct bpf_object *obj) BTF_ELF_SEC, err); btf__free(obj->btf); obj->btf = NULL; + /* btf_ext can't exist without btf, so free it as well */ + if (obj->btf_ext) { + btf_ext__free(obj->btf_ext); + obj->btf_ext = NULL; + } + if (bpf_object__is_btf_mandatory(obj)) return err; } -- cgit From 1d4126c4e1190d2f7d3f388552f9bd17ae0c64fc Mon Sep 17 00:00:00 2001 From: Andrii Nakryiko Date: Fri, 19 Jul 2019 12:46:03 -0700 Subject: libbpf: sanitize VAR to conservative 1-byte INT If VAR in non-sanitized BTF was size less than 4, converting such VAR into an INT with size=4 will cause BTF validation failure due to violationg of STRUCT (into which DATASEC was converted) member size. Fix by conservatively using size=1. Signed-off-by: Andrii Nakryiko Signed-off-by: Alexei Starovoitov --- tools/lib/bpf/libbpf.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index 87168f21ef43..d8833ff6c4a1 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -1377,8 +1377,13 @@ static void bpf_object__sanitize_btf(struct bpf_object *obj) if (!has_datasec && kind == BTF_KIND_VAR) { /* replace VAR with INT */ t->info = BTF_INFO_ENC(BTF_KIND_INT, 0, 0); - t->size = sizeof(int); - *(int *)(t+1) = BTF_INT_ENC(0, 0, 32); + /* + * using size = 1 is the safest choice, 4 will be too + * big and cause kernel BTF validation failure if + * original variable took less than 4 bytes + */ + t->size = 1; + *(int *)(t+1) = BTF_INT_ENC(0, 0, 8); } else if (!has_datasec && kind == BTF_KIND_DATASEC) { /* replace DATASEC with STRUCT */ struct btf_var_secinfo *v = (void *)(t + 1); -- cgit From a7cd67e2b76edd46fbd2517078eeba369f933575 Mon Sep 17 00:00:00 2001 From: Ronald Tschalär Date: Sun, 21 Jul 2019 15:15:12 +0300 Subject: Input: applespi - fix warnings detected by sparse MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This makes sure that we convert from on-wire to CPU endianness in applespi_debug_update_dimensions() and also marks as "static" as it is not needed to be visible outside of the driver. Reported-by: kbuild test robot Signed-off-by: Ronald Tschalär Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/applespi.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/input/keyboard/applespi.c b/drivers/input/keyboard/applespi.c index 548737e7aeda..52d394f473a2 100644 --- a/drivers/input/keyboard/applespi.c +++ b/drivers/input/keyboard/applespi.c @@ -944,10 +944,14 @@ static inline int le16_to_int(__le16 x) static void applespi_debug_update_dimensions(struct applespi_data *applespi, const struct tp_finger *f) { - applespi->tp_dim_min_x = min_t(int, applespi->tp_dim_min_x, f->abs_x); - applespi->tp_dim_max_x = max_t(int, applespi->tp_dim_max_x, f->abs_x); - applespi->tp_dim_min_y = min_t(int, applespi->tp_dim_min_y, f->abs_y); - applespi->tp_dim_max_y = max_t(int, applespi->tp_dim_max_y, f->abs_y); + applespi->tp_dim_min_x = min(applespi->tp_dim_min_x, + le16_to_int(f->abs_x)); + applespi->tp_dim_max_x = max(applespi->tp_dim_max_x, + le16_to_int(f->abs_x)); + applespi->tp_dim_min_y = min(applespi->tp_dim_min_y, + le16_to_int(f->abs_y)); + applespi->tp_dim_max_y = max(applespi->tp_dim_max_y, + le16_to_int(f->abs_y)); } static int applespi_tp_dim_open(struct inode *inode, struct file *file) @@ -1611,8 +1615,8 @@ static void applespi_save_bl_level(struct applespi_data *applespi, efi_attr = EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS; - sts = efivar_entry_set_safe(EFI_BL_LEVEL_NAME, efi_guid, efi_attr, true, - efi_data_len, &efi_data); + sts = efivar_entry_set_safe((efi_char16_t *)EFI_BL_LEVEL_NAME, efi_guid, + efi_attr, true, efi_data_len, &efi_data); if (sts) dev_warn(&applespi->spi->dev, "Error saving backlight level to EFI vars: %d\n", sts); @@ -1953,7 +1957,7 @@ static const struct acpi_device_id applespi_acpi_match[] = { }; MODULE_DEVICE_TABLE(acpi, applespi_acpi_match); -const struct dev_pm_ops applespi_pm_ops = { +static const struct dev_pm_ops applespi_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(applespi_suspend, applespi_resume) .poweroff_late = applespi_poweroff_late, }; -- cgit From 15a78ba1844a8e052c1226f930133de4cef4e7ad Mon Sep 17 00:00:00 2001 From: Wenwen Wang Date: Sat, 20 Jul 2019 07:22:45 -0500 Subject: netfilter: ebtables: fix a memory leak bug in compat In compat_do_replace(), a temporary buffer is allocated through vmalloc() to hold entries copied from the user space. The buffer address is firstly saved to 'newinfo->entries', and later on assigned to 'entries_tmp'. Then the entries in this temporary buffer is copied to the internal kernel structure through compat_copy_entries(). If this copy process fails, compat_do_replace() should be terminated. However, the allocated temporary buffer is not freed on this path, leading to a memory leak. To fix the bug, free the buffer before returning from compat_do_replace(). Signed-off-by: Wenwen Wang Reviewed-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/bridge/netfilter/ebtables.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index 963dfdc14827..fd84b48e48b5 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -2261,8 +2261,10 @@ static int compat_do_replace(struct net *net, void __user *user, state.buf_kern_len = size64; ret = compat_copy_entries(entries_tmp, tmp.entries_size, &state); - if (WARN_ON(ret < 0)) + if (WARN_ON(ret < 0)) { + vfree(entries_tmp); goto out_unlock; + } vfree(entries_tmp); tmp.entries_size = size64; -- cgit From 8dd26dff00c0636b1d8621acaeef3f6f3a39dd77 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Thu, 18 Jul 2019 09:43:33 +0100 Subject: ASoC: dapm: Fix handling of custom_stop_condition on DAPM graph walks DPCM uses snd_soc_dapm_dai_get_connected_widgets to build a list of the widgets connected to a specific front end DAI so it can search through this list for available back end DAIs. The custom_stop_condition was added to is_connected_ep to facilitate this list not containing more widgets than is necessary. Doing so both speeds up the DPCM handling as less widgets need to be searched and avoids issues with CODEC to CODEC links as these would be confused with back end DAIs if they appeared in the list of available widgets. custom_stop_condition was implemented by aborting the graph walk when the condition is triggered, however there is an issue with this approach. Whilst walking the graph is_connected_ep should update the endpoints cache on each widget, if the walk is aborted the number of attached end points is unknown for that sub-graph. When the stop condition triggered, the original patch ignored the triggering widget and returned zero connected end points; a later patch updated this to set the triggering widget's cache to 1 and return that. Both of these approaches result in inaccurate values being stored in various end point caches as the values propagate back through the graph, which can result in later issues with widgets powering/not powering unexpectedly. As the original goal was to reduce the size of the widget list passed to the DPCM code, the simplest solution is to limit the functionality of the custom_stop_condition to the widget list. This means the rest of the graph will still be processed resulting in correct end point caches, but only widgets up to the stop condition will be added to the returned widget list. Fixes: 6742064aef7f ("ASoC: dapm: support user-defined stop condition in dai_get_connected_widgets") Fixes: 5fdd022c2026 ("ASoC: dpcm: play nice with CODEC<->CODEC links") Fixes: 09464974eaa8 ("ASoC: dapm: Fix to return correct path list in is_connected_ep.") Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20190718084333.15598-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 6b44b4a78b8e..9cd87e47ee8f 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -1157,8 +1157,8 @@ static __always_inline int is_connected_ep(struct snd_soc_dapm_widget *widget, list_add_tail(&widget->work_list, list); if (custom_stop_condition && custom_stop_condition(widget, dir)) { - widget->endpoints[dir] = 1; - return widget->endpoints[dir]; + list = NULL; + custom_stop_condition = NULL; } if ((widget->is_ep & SND_SOC_DAPM_DIR_TO_EP(dir)) && widget->connected) { @@ -1195,8 +1195,8 @@ static __always_inline int is_connected_ep(struct snd_soc_dapm_widget *widget, * * Optionally, can be supplied with a function acting as a stopping condition. * This function takes the dapm widget currently being examined and the walk - * direction as an arguments, it should return true if the walk should be - * stopped and false otherwise. + * direction as an arguments, it should return true if widgets from that point + * in the graph onwards should not be added to the widget list. */ static int is_connected_output_ep(struct snd_soc_dapm_widget *widget, struct list_head *list, -- cgit From 48dfd37a0f85400610153101c72222bf01523699 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Tue, 16 Jul 2019 17:45:47 +0800 Subject: ASoC: cs42xx8: Fix MFREQ selection issue for async mode When sample rate of TX is different with sample rate of RX in async mode, the MFreq selection will be wrong. For example, sysclk = 24.576MHz, TX rate = 96000Hz, RX rate = 48000Hz. Then ratio of TX = 256, ratio of RX = 512, For MFreq is shared by TX and RX instance, the correct value of MFreq is 2 for both TX and RX. But original method will cause MFreq = 0 for TX, MFreq = 2 for RX. If TX is started after RX, RX will be impacted, RX work abnormal with MFreq = 0. This patch is to select proper MFreq value according to TX rate and RX rate. Fixes: 0c516b4ff85c ("ASoC: cs42xx8: Add codec driver support for CS42448/CS42888") Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/20190716094547.46787-1-shengjiu.wang@nxp.com Signed-off-by: Mark Brown --- sound/soc/codecs/cs42xx8.c | 116 +++++++++++++++++++++++++++++++++++++-------- 1 file changed, 97 insertions(+), 19 deletions(-) diff --git a/sound/soc/codecs/cs42xx8.c b/sound/soc/codecs/cs42xx8.c index 6203f54d9f25..5b049fcdba20 100644 --- a/sound/soc/codecs/cs42xx8.c +++ b/sound/soc/codecs/cs42xx8.c @@ -47,6 +47,7 @@ struct cs42xx8_priv { unsigned long sysclk; u32 tx_channels; struct gpio_desc *gpiod_reset; + u32 rate[2]; }; /* -127.5dB to 0dB with step of 0.5dB */ @@ -176,21 +177,27 @@ static const struct snd_soc_dapm_route cs42xx8_adc3_dapm_routes[] = { }; struct cs42xx8_ratios { - unsigned int ratio; - unsigned char speed; - unsigned char mclk; + unsigned int mfreq; + unsigned int min_mclk; + unsigned int max_mclk; + unsigned int ratio[3]; }; +/* + * According to reference mannual, define the cs42xx8_ratio struct + * MFreq2 | MFreq1 | MFreq0 | Description | SSM | DSM | QSM | + * 0 | 0 | 0 |1.029MHz to 12.8MHz | 256 | 128 | 64 | + * 0 | 0 | 1 |1.536MHz to 19.2MHz | 384 | 192 | 96 | + * 0 | 1 | 0 |2.048MHz to 25.6MHz | 512 | 256 | 128 | + * 0 | 1 | 1 |3.072MHz to 38.4MHz | 768 | 384 | 192 | + * 1 | x | x |4.096MHz to 51.2MHz |1024 | 512 | 256 | + */ static const struct cs42xx8_ratios cs42xx8_ratios[] = { - { 64, CS42XX8_FM_QUAD, CS42XX8_FUNCMOD_MFREQ_256(4) }, - { 96, CS42XX8_FM_QUAD, CS42XX8_FUNCMOD_MFREQ_384(4) }, - { 128, CS42XX8_FM_QUAD, CS42XX8_FUNCMOD_MFREQ_512(4) }, - { 192, CS42XX8_FM_QUAD, CS42XX8_FUNCMOD_MFREQ_768(4) }, - { 256, CS42XX8_FM_SINGLE, CS42XX8_FUNCMOD_MFREQ_256(1) }, - { 384, CS42XX8_FM_SINGLE, CS42XX8_FUNCMOD_MFREQ_384(1) }, - { 512, CS42XX8_FM_SINGLE, CS42XX8_FUNCMOD_MFREQ_512(1) }, - { 768, CS42XX8_FM_SINGLE, CS42XX8_FUNCMOD_MFREQ_768(1) }, - { 1024, CS42XX8_FM_SINGLE, CS42XX8_FUNCMOD_MFREQ_1024(1) } + { 0, 1029000, 12800000, {256, 128, 64} }, + { 2, 1536000, 19200000, {384, 192, 96} }, + { 4, 2048000, 25600000, {512, 256, 128} }, + { 6, 3072000, 38400000, {768, 384, 192} }, + { 8, 4096000, 51200000, {1024, 512, 256} }, }; static int cs42xx8_set_dai_sysclk(struct snd_soc_dai *codec_dai, @@ -257,14 +264,68 @@ static int cs42xx8_hw_params(struct snd_pcm_substream *substream, struct snd_soc_component *component = dai->component; struct cs42xx8_priv *cs42xx8 = snd_soc_component_get_drvdata(component); bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; - u32 ratio = cs42xx8->sysclk / params_rate(params); - u32 i, fm, val, mask; + u32 ratio[2]; + u32 rate[2]; + u32 fm[2]; + u32 i, val, mask; + bool condition1, condition2; if (tx) cs42xx8->tx_channels = params_channels(params); + rate[tx] = params_rate(params); + rate[!tx] = cs42xx8->rate[!tx]; + + ratio[tx] = rate[tx] > 0 ? cs42xx8->sysclk / rate[tx] : 0; + ratio[!tx] = rate[!tx] > 0 ? cs42xx8->sysclk / rate[!tx] : 0; + + /* Get functional mode for tx and rx according to rate */ + for (i = 0; i < 2; i++) { + if (cs42xx8->slave_mode) { + fm[i] = CS42XX8_FM_AUTO; + } else { + if (rate[i] < 50000) { + fm[i] = CS42XX8_FM_SINGLE; + } else if (rate[i] > 50000 && rate[i] < 100000) { + fm[i] = CS42XX8_FM_DOUBLE; + } else if (rate[i] > 100000 && rate[i] < 200000) { + fm[i] = CS42XX8_FM_QUAD; + } else { + dev_err(component->dev, + "unsupported sample rate\n"); + return -EINVAL; + } + } + } + for (i = 0; i < ARRAY_SIZE(cs42xx8_ratios); i++) { - if (cs42xx8_ratios[i].ratio == ratio) + /* Is the ratio[tx] valid ? */ + condition1 = ((fm[tx] == CS42XX8_FM_AUTO) ? + (cs42xx8_ratios[i].ratio[0] == ratio[tx] || + cs42xx8_ratios[i].ratio[1] == ratio[tx] || + cs42xx8_ratios[i].ratio[2] == ratio[tx]) : + (cs42xx8_ratios[i].ratio[fm[tx]] == ratio[tx])) && + cs42xx8->sysclk >= cs42xx8_ratios[i].min_mclk && + cs42xx8->sysclk <= cs42xx8_ratios[i].max_mclk; + + if (!ratio[tx]) + condition1 = true; + + /* Is the ratio[!tx] valid ? */ + condition2 = ((fm[!tx] == CS42XX8_FM_AUTO) ? + (cs42xx8_ratios[i].ratio[0] == ratio[!tx] || + cs42xx8_ratios[i].ratio[1] == ratio[!tx] || + cs42xx8_ratios[i].ratio[2] == ratio[!tx]) : + (cs42xx8_ratios[i].ratio[fm[!tx]] == ratio[!tx])); + + if (!ratio[!tx]) + condition2 = true; + + /* + * Both ratio[tx] and ratio[!tx] is valid, then we get + * a proper MFreq. + */ + if (condition1 && condition2) break; } @@ -273,15 +334,31 @@ static int cs42xx8_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } - mask = CS42XX8_FUNCMOD_MFREQ_MASK; - val = cs42xx8_ratios[i].mclk; + cs42xx8->rate[tx] = params_rate(params); - fm = cs42xx8->slave_mode ? CS42XX8_FM_AUTO : cs42xx8_ratios[i].speed; + mask = CS42XX8_FUNCMOD_MFREQ_MASK; + val = cs42xx8_ratios[i].mfreq; regmap_update_bits(cs42xx8->regmap, CS42XX8_FUNCMOD, CS42XX8_FUNCMOD_xC_FM_MASK(tx) | mask, - CS42XX8_FUNCMOD_xC_FM(tx, fm) | val); + CS42XX8_FUNCMOD_xC_FM(tx, fm[tx]) | val); + + return 0; +} + +static int cs42xx8_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct cs42xx8_priv *cs42xx8 = snd_soc_component_get_drvdata(component); + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; + /* Clear stored rate */ + cs42xx8->rate[tx] = 0; + + regmap_update_bits(cs42xx8->regmap, CS42XX8_FUNCMOD, + CS42XX8_FUNCMOD_xC_FM_MASK(tx), + CS42XX8_FUNCMOD_xC_FM(tx, CS42XX8_FM_AUTO)); return 0; } @@ -302,6 +379,7 @@ static const struct snd_soc_dai_ops cs42xx8_dai_ops = { .set_fmt = cs42xx8_set_dai_fmt, .set_sysclk = cs42xx8_set_dai_sysclk, .hw_params = cs42xx8_hw_params, + .hw_free = cs42xx8_hw_free, .digital_mute = cs42xx8_digital_mute, }; -- cgit From f86621cd6c6f54edfdd62da347b2bbb8d7fddc8d Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Fri, 19 Jul 2019 19:39:29 +0200 Subject: SoC: rockchip: rockchip_max98090: Enable MICBIAS for headset keypress detection The TS3A227E says that the headset keypress detection needs the MICBIAS power in order to report the key events to ensure proper operation The headset keypress detection needs the MICBIAS power in order to report the key events all the time as long as MIC is present. So MICBIAS pin is forced on when a MICROPHONE is detected. On Veyron Minnie I observed that if the MICBIAS power is not present and the key press detection is activated (just because it is enabled when you insert a headset), it randomly reports a keypress on insert. E.g. (KEY_PLAYPAUSE) Event: (SW_HEADPHONE_INSERT), value 1 Event: (SW_MICROPHONE_INSERT), value 1 Event: -------------- SYN_REPORT ------------ Event: (KEY_PLAYPAUSE), value 1 Userspace thinks that KEY_PLAYPAUSE is pressed and produces the annoying effect that the media player starts a play/pause loop. Note that, although most of the time the key reported is the one associated with BTN_0, not always this is true. On my tests I also saw different keys reported Signed-off-by: Enric Balletbo i Serra Link: https://lore.kernel.org/r/20190719173929.24065-1-enric.balletbo@collabora.com Signed-off-by: Mark Brown --- sound/soc/rockchip/rockchip_max98090.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/sound/soc/rockchip/rockchip_max98090.c b/sound/soc/rockchip/rockchip_max98090.c index c5fc24675a33..782e534d4c0d 100644 --- a/sound/soc/rockchip/rockchip_max98090.c +++ b/sound/soc/rockchip/rockchip_max98090.c @@ -61,6 +61,37 @@ static const struct snd_kcontrol_new rk_mc_controls[] = { SOC_DAPM_PIN_SWITCH("Speaker"), }; +static int rk_jack_event(struct notifier_block *nb, unsigned long event, + void *data) +{ + struct snd_soc_jack *jack = (struct snd_soc_jack *)data; + struct snd_soc_dapm_context *dapm = &jack->card->dapm; + + if (event & SND_JACK_MICROPHONE) + snd_soc_dapm_force_enable_pin(dapm, "MICBIAS"); + else + snd_soc_dapm_disable_pin(dapm, "MICBIAS"); + + snd_soc_dapm_sync(dapm); + + return 0; +} + +static struct notifier_block rk_jack_nb = { + .notifier_call = rk_jack_event, +}; + +static int rk_init(struct snd_soc_pcm_runtime *runtime) +{ + /* + * The jack has already been created in the rk_98090_headset_init() + * function. + */ + snd_soc_jack_notifier_register(&headset_jack, &rk_jack_nb); + + return 0; +} + static int rk_aif1_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { @@ -119,6 +150,7 @@ SND_SOC_DAILINK_DEFS(hifi, static struct snd_soc_dai_link rk_dailink = { .name = "max98090", .stream_name = "Audio", + .init = rk_init, .ops = &rk_aif1_ops, /* set max98090 as slave */ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -- cgit From 62ec3d13601bd626ca7a0edef6d45dbb753d94e8 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sun, 21 Jul 2019 23:23:08 +0900 Subject: ASoC: SOF: use __u32 instead of uint32_t in uapi headers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When CONFIG_UAPI_HEADER_TEST=y, exported headers are compile-tested to make sure they can be included from user-space. Currently, header.h and fw.h are excluded from the test coverage. To make them join the compile-test, we need to fix the build errors attached below. For a case like this, we decided to use __u{8,16,32,64} variable types in this discussion: https://lkml.org/lkml/2019/6/5/18 Build log: CC usr/include/sound/sof/header.h.s CC usr/include/sound/sof/fw.h.s In file included from :32:0: ./usr/include/sound/sof/header.h:19:2: error: unknown type name ‘uint32_t’ uint32_t magic; /**< 'S', 'O', 'F', '\0' */ ^~~~~~~~ ./usr/include/sound/sof/header.h:20:2: error: unknown type name ‘uint32_t’ uint32_t type; /**< component specific type */ ^~~~~~~~ ./usr/include/sound/sof/header.h:21:2: error: unknown type name ‘uint32_t’ uint32_t size; /**< size in bytes of data excl. this struct */ ^~~~~~~~ ./usr/include/sound/sof/header.h:22:2: error: unknown type name ‘uint32_t’ uint32_t abi; /**< SOF ABI version */ ^~~~~~~~ ./usr/include/sound/sof/header.h:23:2: error: unknown type name ‘uint32_t’ uint32_t reserved[4]; /**< reserved for future use */ ^~~~~~~~ ./usr/include/sound/sof/header.h:24:2: error: unknown type name ‘uint32_t’ uint32_t data[0]; /**< Component data - opaque to core */ ^~~~~~~~ In file included from :32:0: ./usr/include/sound/sof/fw.h:49:2: error: unknown type name ‘uint32_t’ uint32_t size; /* bytes minus this header */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:50:2: error: unknown type name ‘uint32_t’ uint32_t offset; /* offset from base */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:64:2: error: unknown type name ‘uint32_t’ uint32_t size; /* bytes minus this header */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:65:2: error: unknown type name ‘uint32_t’ uint32_t num_blocks; /* number of blocks */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:73:2: error: unknown type name ‘uint32_t’ uint32_t file_size; /* size of file minus this header */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:74:2: error: unknown type name ‘uint32_t’ uint32_t num_modules; /* number of modules */ ^~~~~~~~ ./usr/include/sound/sof/fw.h:75:2: error: unknown type name ‘uint32_t’ uint32_t abi; /* version of header format */ ^~~~~~~~ Signed-off-by: Masahiro Yamada Link: https://lore.kernel.org/r/20190721142308.30306-1-yamada.masahiro@socionext.com Signed-off-by: Mark Brown --- include/uapi/sound/sof/fw.h | 16 +++++++++------- include/uapi/sound/sof/header.h | 14 ++++++++------ 2 files changed, 17 insertions(+), 13 deletions(-) diff --git a/include/uapi/sound/sof/fw.h b/include/uapi/sound/sof/fw.h index 1afca973eb09..e9f697467a86 100644 --- a/include/uapi/sound/sof/fw.h +++ b/include/uapi/sound/sof/fw.h @@ -13,6 +13,8 @@ #ifndef __INCLUDE_UAPI_SOF_FW_H__ #define __INCLUDE_UAPI_SOF_FW_H__ +#include + #define SND_SOF_FW_SIG_SIZE 4 #define SND_SOF_FW_ABI 1 #define SND_SOF_FW_SIG "Reef" @@ -46,8 +48,8 @@ enum snd_sof_fw_blk_type { struct snd_sof_blk_hdr { enum snd_sof_fw_blk_type type; - uint32_t size; /* bytes minus this header */ - uint32_t offset; /* offset from base */ + __u32 size; /* bytes minus this header */ + __u32 offset; /* offset from base */ } __packed; /* @@ -61,8 +63,8 @@ enum snd_sof_fw_mod_type { struct snd_sof_mod_hdr { enum snd_sof_fw_mod_type type; - uint32_t size; /* bytes minus this header */ - uint32_t num_blocks; /* number of blocks */ + __u32 size; /* bytes minus this header */ + __u32 num_blocks; /* number of blocks */ } __packed; /* @@ -70,9 +72,9 @@ struct snd_sof_mod_hdr { */ struct snd_sof_fw_header { unsigned char sig[SND_SOF_FW_SIG_SIZE]; /* "Reef" */ - uint32_t file_size; /* size of file minus this header */ - uint32_t num_modules; /* number of modules */ - uint32_t abi; /* version of header format */ + __u32 file_size; /* size of file minus this header */ + __u32 num_modules; /* number of modules */ + __u32 abi; /* version of header format */ } __packed; #endif diff --git a/include/uapi/sound/sof/header.h b/include/uapi/sound/sof/header.h index 7868990b0d6f..5f4518e7a972 100644 --- a/include/uapi/sound/sof/header.h +++ b/include/uapi/sound/sof/header.h @@ -9,6 +9,8 @@ #ifndef __INCLUDE_UAPI_SOUND_SOF_USER_HEADER_H__ #define __INCLUDE_UAPI_SOUND_SOF_USER_HEADER_H__ +#include + /* * Header for all non IPC ABI data. * @@ -16,12 +18,12 @@ * Used by any bespoke component data structures or binary blobs. */ struct sof_abi_hdr { - uint32_t magic; /**< 'S', 'O', 'F', '\0' */ - uint32_t type; /**< component specific type */ - uint32_t size; /**< size in bytes of data excl. this struct */ - uint32_t abi; /**< SOF ABI version */ - uint32_t reserved[4]; /**< reserved for future use */ - uint32_t data[0]; /**< Component data - opaque to core */ + __u32 magic; /**< 'S', 'O', 'F', '\0' */ + __u32 type; /**< component specific type */ + __u32 size; /**< size in bytes of data excl. this struct */ + __u32 abi; /**< SOF ABI version */ + __u32 reserved[4]; /**< reserved for future use */ + __u32 data[0]; /**< Component data - opaque to core */ } __packed; #endif -- cgit From 1274204542f683e1d8491ebe9cc86284d5a8ebcc Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Fri, 19 Jul 2019 14:27:13 +0200 Subject: spi: pxa2xx: Balance runtime PM enable/disable on error Don't undo the PM initialization if we error out before we managed to initialize it. The call to pm_runtime_disable() without being preceded by pm_runtime_enable() would disturb the balance of the Force. In practice, this happens if we fail to allocate any of the GPIOS ("cs", "ready") due to -EPROBE_DEFER because we're getting probled before the GPIO driver. Signed-off-by: Lubomir Rintel Link: https://lore.kernel.org/r/20190719122713.3444318-1-lkundrak@v3.sk Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index fc7ab4b26880..22513caf2000 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1831,14 +1831,16 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) status = devm_spi_register_controller(&pdev->dev, controller); if (status != 0) { dev_err(&pdev->dev, "problem registering spi controller\n"); - goto out_error_clock_enabled; + goto out_error_pm_runtime_enabled; } return status; -out_error_clock_enabled: +out_error_pm_runtime_enabled: pm_runtime_put_noidle(&pdev->dev); pm_runtime_disable(&pdev->dev); + +out_error_clock_enabled: clk_disable_unprepare(ssp->clk); out_error_dma_irq_alloc: -- cgit From fc62113b32c95906b3ea8ba42e91014c7d0c6fa6 Mon Sep 17 00:00:00 2001 From: Baolin Wang Date: Mon, 15 Jul 2019 18:00:14 +0800 Subject: mmc: host: sdhci-sprd: Fix the missing pm_runtime_put_noidle() When the SD host controller tries to probe again due to the derferred probe mechanism, it will always keep the SD host device as runtime resume state due to missing the runtime put operation in error path last time. Thus add the pm_runtime_put_noidle() in error path to make the PM runtime counter balance, which can make the SD host device's PM runtime work well. Signed-off-by: Baolin Wang Acked-by: Adrian Hunter Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-sprd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c index 6ee340a3fb3a..603a5d9f045a 100644 --- a/drivers/mmc/host/sdhci-sprd.c +++ b/drivers/mmc/host/sdhci-sprd.c @@ -624,6 +624,7 @@ err_cleanup_host: sdhci_cleanup_host(host); pm_runtime_disable: + pm_runtime_put_noidle(&pdev->dev); pm_runtime_disable(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); -- cgit From ba2d139b02ba684c6c101de42fed782d6cd2b997 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Mon, 8 Jul 2019 12:56:13 -0700 Subject: mmc: dw_mmc: Fix occasional hang after tuning on eMMC In commit 46d179525a1f ("mmc: dw_mmc: Wait for data transfer after response errors.") we fixed a tuning-induced hang that I saw when stress testing tuning on certain SD cards. I won't re-hash that whole commit, but the summary is that as a normal part of tuning you need to deal with transfer errors and there were cases where these transfer errors was putting my system into a bad state causing all future transfers to fail. That commit fixed handling of the transfer errors for me. In downstream Chrome OS my fix landed and had the same behavior for all SD/MMC commands. However, it looks like when the commit landed upstream we limited it to only SD tuning commands. Presumably this was to try to get around problems that Alim Akhtar reported on exynos [1]. Unfortunately while stress testing reboots (and suspend/resume) on some rk3288-based Chromebooks I found the same problem on the eMMC on some of my Chromebooks (the ones with Hynix eMMC). Since the eMMC tuning command is different (MMC_SEND_TUNING_BLOCK_HS200 vs. MMC_SEND_TUNING_BLOCK) we were basically getting back into the same situation. I'm hoping that whatever problems exynos was having in the past are somehow magically fixed now and we can make the behavior the same for all commands. [1] https://lkml.kernel.org/r/CAGOxZ53WfNbaMe0_AM0qBqU47kAfgmPBVZC8K8Y-_J3mDMqW4A@mail.gmail.com Fixes: 46d179525a1f ("mmc: dw_mmc: Wait for data transfer after response errors.") Signed-off-by: Douglas Anderson Cc: Marek Szyprowski Cc: Alim Akhtar Cc: Enric Balletbo i Serra Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/dw_mmc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index faaaf52a46d2..eea52e2c5a0c 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -2012,8 +2012,7 @@ static void dw_mci_tasklet_func(unsigned long priv) * delayed. Allowing the transfer to take place * avoids races and keeps things simple. */ - if ((err != -ETIMEDOUT) && - (cmd->opcode == MMC_SEND_TUNING_BLOCK)) { + if (err != -ETIMEDOUT) { state = STATE_SENDING_DATA; continue; } -- cgit From 665e985c2f41bebc3e6cee7e04c36a44afbc58f7 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 9 Jul 2019 22:04:19 -0700 Subject: mmc: meson-mx-sdio: Fix misuse of GENMASK macro Arguments are supposed to be ordered high then low. Signed-off-by: Joe Perches Reviewed-by: Neil Armstrong Fixes: ed80a13bb4c4 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/meson-mx-sdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/meson-mx-sdio.c b/drivers/mmc/host/meson-mx-sdio.c index 2d736e416775..ba9a63db73da 100644 --- a/drivers/mmc/host/meson-mx-sdio.c +++ b/drivers/mmc/host/meson-mx-sdio.c @@ -73,7 +73,7 @@ #define MESON_MX_SDIO_IRQC_IF_CONFIG_MASK GENMASK(7, 6) #define MESON_MX_SDIO_IRQC_FORCE_DATA_CLK BIT(8) #define MESON_MX_SDIO_IRQC_FORCE_DATA_CMD BIT(9) - #define MESON_MX_SDIO_IRQC_FORCE_DATA_DAT_MASK GENMASK(10, 13) + #define MESON_MX_SDIO_IRQC_FORCE_DATA_DAT_MASK GENMASK(13, 10) #define MESON_MX_SDIO_IRQC_SOFT_RESET BIT(15) #define MESON_MX_SDIO_IRQC_FORCE_HALT BIT(30) #define MESON_MX_SDIO_IRQC_HALT_HOLE BIT(31) -- cgit From 3a6ffb3c8c3274a39dc8f2514526e645c5d21753 Mon Sep 17 00:00:00 2001 From: Andreas Koop Date: Mon, 22 Jul 2019 12:03:06 +0800 Subject: mmc: mmc_spi: Enable stable writes While using the mmc_spi driver occasionally errors like this popped up: mmcblk0: error -84 transferring data end_request: I/O error, dev mmcblk0, sector 581756 I looked on the Internet for occurrences of the same problem and came across a helpful post [1]. It includes source code to reproduce the bug. There is also an analysis about the cause. During transmission data in the supplied buffer is being modified. Thus the previously calculated checksum is not correct anymore. After some digging I found out that device drivers are supposed to report they need stable writes. To fix this I set the appropriate flag at queue initialization if CRC checksumming is enabled for that SPI host. [1] https://groups.google.com/forum/#!msg/sim1/gLlzWeXGFr8/KevXinUXfc8J Signed-off-by: Andreas Koop [shihpo: Rebase on top of v5.3-rc1] Signed-off-by: ShihPo Hung Cc: Paul Walmsley CC: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/core/queue.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c index e327f80ebe70..7102e2ebc614 100644 --- a/drivers/mmc/core/queue.c +++ b/drivers/mmc/core/queue.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include @@ -427,6 +428,10 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card) goto free_tag_set; } + if (mmc_host_is_spi(host) && host->use_spi_crc) + mq->queue->backing_dev_info->capabilities |= + BDI_CAP_STABLE_WRITES; + mq->queue->queuedata = mq; blk_queue_rq_timeout(mq->queue, 60 * HZ); -- cgit From 223ecaf140b1dd1c1d2a1a1d96281efc5c906984 Mon Sep 17 00:00:00 2001 From: Michael Wu Date: Mon, 8 Jul 2019 13:23:08 +0800 Subject: gpiolib: fix incorrect IRQ requesting of an active-low lineevent When a pin is active-low, logical trigger edge should be inverted to match the same interrupt opportunity. For example, a button pushed triggers falling edge in ACTIVE_HIGH case; in ACTIVE_LOW case, the button pushed triggers rising edge. For user space the IRQ requesting doesn't need to do any modification except to configuring GPIOHANDLE_REQUEST_ACTIVE_LOW. For example, we want to catch the event when the button is pushed. The button on the original board drives level to be low when it is pushed, and drives level to be high when it is released. In user space we can do: req.handleflags = GPIOHANDLE_REQUEST_INPUT; req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE; while (1) { read(fd, &dat, sizeof(dat)); if (dat.id == GPIOEVENT_EVENT_FALLING_EDGE) printf("button pushed\n"); } Run the same logic on another board which the polarity of the button is inverted; it drives level to be high when pushed, and level to be low when released. For this inversion we add flag GPIOHANDLE_REQUEST_ACTIVE_LOW: req.handleflags = GPIOHANDLE_REQUEST_INPUT | GPIOHANDLE_REQUEST_ACTIVE_LOW; req.eventflags = GPIOEVENT_REQUEST_FALLING_EDGE; At the result, there are no any events caught when the button is pushed. By the way, button releasing will emit a "falling" event. The timing of "falling" catching is not expected. Cc: stable@vger.kernel.org Signed-off-by: Michael Wu Tested-by: Bartosz Golaszewski Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 3ee99d070608..bf05c29b53be 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -956,9 +956,11 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip) } if (eflags & GPIOEVENT_REQUEST_RISING_EDGE) - irqflags |= IRQF_TRIGGER_RISING; + irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ? + IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING; if (eflags & GPIOEVENT_REQUEST_FALLING_EDGE) - irqflags |= IRQF_TRIGGER_FALLING; + irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ? + IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING; irqflags |= IRQF_ONESHOT; INIT_KFIFO(le->events); -- cgit From 318892ac068397f40ff81d9155898da01493b1d2 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 19 Jul 2019 10:29:14 -0700 Subject: net/tls: don't arm strparser immediately in tls_set_sw_offload() In tls_set_device_offload_rx() we prepare the software context for RX fallback and proceed to add the connection to the device. Unfortunately, software context prep includes arming strparser so in case of a later error we have to release the socket lock to call strp_done(). In preparation for not releasing the socket lock half way through callbacks move arming strparser into a separate function. Following patches will make use of that. Signed-off-by: Jakub Kicinski Reviewed-by: Dirk van der Merwe Signed-off-by: Daniel Borkmann --- include/net/tls.h | 1 + net/tls/tls_device.c | 1 + net/tls/tls_main.c | 8 +++++--- net/tls/tls_sw.c | 19 ++++++++++++------- 4 files changed, 19 insertions(+), 10 deletions(-) diff --git a/include/net/tls.h b/include/net/tls.h index 584609174fe0..43f551cd508b 100644 --- a/include/net/tls.h +++ b/include/net/tls.h @@ -355,6 +355,7 @@ int tls_sk_attach(struct sock *sk, int optname, char __user *optval, unsigned int optlen); int tls_set_sw_offload(struct sock *sk, struct tls_context *ctx, int tx); +void tls_sw_strparser_arm(struct sock *sk, struct tls_context *ctx); int tls_sw_sendmsg(struct sock *sk, struct msghdr *msg, size_t size); int tls_sw_sendpage(struct sock *sk, struct page *page, int offset, size_t size, int flags); diff --git a/net/tls/tls_device.c b/net/tls/tls_device.c index 7c0b2b778703..4d67d72f007c 100644 --- a/net/tls/tls_device.c +++ b/net/tls/tls_device.c @@ -1045,6 +1045,7 @@ int tls_set_device_offload_rx(struct sock *sk, struct tls_context *ctx) rc = tls_set_sw_offload(sk, ctx, 0); if (rc) goto release_ctx; + tls_sw_strparser_arm(sk, ctx); rc = netdev->tlsdev_ops->tls_dev_add(netdev, sk, TLS_OFFLOAD_CTX_DIR_RX, &ctx->crypto_recv.info, diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index 4674e57e66b0..85a9d7d57b32 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -526,6 +526,8 @@ static int do_tls_setsockopt_conf(struct sock *sk, char __user *optval, { #endif rc = tls_set_sw_offload(sk, ctx, 1); + if (rc) + goto err_crypto_info; conf = TLS_SW; } } else { @@ -537,13 +539,13 @@ static int do_tls_setsockopt_conf(struct sock *sk, char __user *optval, { #endif rc = tls_set_sw_offload(sk, ctx, 0); + if (rc) + goto err_crypto_info; + tls_sw_strparser_arm(sk, ctx); conf = TLS_SW; } } - if (rc) - goto err_crypto_info; - if (tx) ctx->tx_conf = conf; else diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index 53b4ad94e74a..f58a8ffc2a9c 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -2160,6 +2160,18 @@ void tls_sw_write_space(struct sock *sk, struct tls_context *ctx) } } +void tls_sw_strparser_arm(struct sock *sk, struct tls_context *tls_ctx) +{ + struct tls_sw_context_rx *rx_ctx = tls_sw_ctx_rx(tls_ctx); + + write_lock_bh(&sk->sk_callback_lock); + rx_ctx->saved_data_ready = sk->sk_data_ready; + sk->sk_data_ready = tls_data_ready; + write_unlock_bh(&sk->sk_callback_lock); + + strp_check_rcv(&rx_ctx->strp); +} + int tls_set_sw_offload(struct sock *sk, struct tls_context *ctx, int tx) { struct tls_context *tls_ctx = tls_get_ctx(sk); @@ -2357,13 +2369,6 @@ int tls_set_sw_offload(struct sock *sk, struct tls_context *ctx, int tx) cb.parse_msg = tls_read_size; strp_init(&sw_ctx_rx->strp, sk, &cb); - - write_lock_bh(&sk->sk_callback_lock); - sw_ctx_rx->saved_data_ready = sk->sk_data_ready; - sk->sk_data_ready = tls_data_ready; - write_unlock_bh(&sk->sk_callback_lock); - - strp_check_rcv(&sw_ctx_rx->strp); } goto out; -- cgit From ac78fc148d8249dbf382c2127456dd08ec5b161c Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 19 Jul 2019 10:29:15 -0700 Subject: net/tls: don't call tls_sk_proto_close for hw record offload The deprecated TOE offload doesn't actually do anything in tls_sk_proto_close() - all TLS code is skipped and context not freed. Remove the callback to make it easier to refactor tls_sk_proto_close(). Signed-off-by: Jakub Kicinski Reviewed-by: Dirk van der Merwe Signed-off-by: Daniel Borkmann --- net/tls/tls_main.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index 85a9d7d57b32..7ab682ed99fa 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -271,9 +271,6 @@ static void tls_sk_proto_close(struct sock *sk, long timeout) lock_sock(sk); sk_proto_close = ctx->sk_proto_close; - if (ctx->tx_conf == TLS_HW_RECORD && ctx->rx_conf == TLS_HW_RECORD) - goto skip_tx_cleanup; - if (ctx->tx_conf == TLS_BASE && ctx->rx_conf == TLS_BASE) { free_ctx = true; goto skip_tx_cleanup; @@ -766,7 +763,6 @@ static void build_protos(struct proto prot[TLS_NUM_CONFIG][TLS_NUM_CONFIG], prot[TLS_HW_RECORD][TLS_HW_RECORD] = *base; prot[TLS_HW_RECORD][TLS_HW_RECORD].hash = tls_hw_hash; prot[TLS_HW_RECORD][TLS_HW_RECORD].unhash = tls_hw_unhash; - prot[TLS_HW_RECORD][TLS_HW_RECORD].close = tls_sk_proto_close; } static int tls_init(struct sock *sk) -- cgit From f87e62d45e51b12d48d2cb46b5cde8f83b866bc4 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Fri, 19 Jul 2019 10:29:16 -0700 Subject: net/tls: remove close callback sock unlock/lock around TX work flush The tls close() callback currently drops the sock lock, makes a cancel_delayed_work_sync() call, and then relocks the sock. By restructuring the code we can avoid droping lock and then reclaiming it. To simplify this we do the following, tls_sk_proto_close set_bit(CLOSING) set_bit(SCHEDULE) cancel_delay_work_sync() <- cancel workqueue lock_sock(sk) ... release_sock(sk) strp_done() Setting the CLOSING bit prevents the SCHEDULE bit from being cleared by any workqueue items e.g. if one happens to be scheduled and run between when we set SCHEDULE bit and cancel work. Then because SCHEDULE bit is set now no new work will be scheduled. Tested with net selftests and bpf selftests. Signed-off-by: John Fastabend Signed-off-by: Jakub Kicinski Reviewed-by: Dirk van der Merwe Signed-off-by: Daniel Borkmann --- include/net/tls.h | 2 ++ net/tls/tls_main.c | 3 +++ net/tls/tls_sw.c | 24 +++++++++++++++++------- 3 files changed, 22 insertions(+), 7 deletions(-) diff --git a/include/net/tls.h b/include/net/tls.h index 43f551cd508b..d4276cb6de53 100644 --- a/include/net/tls.h +++ b/include/net/tls.h @@ -162,6 +162,7 @@ struct tls_sw_context_tx { int async_capable; #define BIT_TX_SCHEDULED 0 +#define BIT_TX_CLOSING 1 unsigned long tx_bitmask; }; @@ -360,6 +361,7 @@ int tls_sw_sendmsg(struct sock *sk, struct msghdr *msg, size_t size); int tls_sw_sendpage(struct sock *sk, struct page *page, int offset, size_t size, int flags); void tls_sw_close(struct sock *sk, long timeout); +void tls_sw_cancel_work_tx(struct tls_context *tls_ctx); void tls_sw_free_resources_tx(struct sock *sk); void tls_sw_free_resources_rx(struct sock *sk); void tls_sw_release_resources_rx(struct sock *sk); diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index 7ab682ed99fa..5c29b410cf7d 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -268,6 +268,9 @@ static void tls_sk_proto_close(struct sock *sk, long timeout) void (*sk_proto_close)(struct sock *sk, long timeout); bool free_ctx = false; + if (ctx->tx_conf == TLS_SW) + tls_sw_cancel_work_tx(ctx); + lock_sock(sk); sk_proto_close = ctx->sk_proto_close; diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index f58a8ffc2a9c..38c0e53c727d 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -2054,6 +2054,15 @@ static void tls_data_ready(struct sock *sk) } } +void tls_sw_cancel_work_tx(struct tls_context *tls_ctx) +{ + struct tls_sw_context_tx *ctx = tls_sw_ctx_tx(tls_ctx); + + set_bit(BIT_TX_CLOSING, &ctx->tx_bitmask); + set_bit(BIT_TX_SCHEDULED, &ctx->tx_bitmask); + cancel_delayed_work_sync(&ctx->tx_work.work); +} + void tls_sw_free_resources_tx(struct sock *sk) { struct tls_context *tls_ctx = tls_get_ctx(sk); @@ -2065,11 +2074,6 @@ void tls_sw_free_resources_tx(struct sock *sk) if (atomic_read(&ctx->encrypt_pending)) crypto_wait_req(-EINPROGRESS, &ctx->async_wait); - release_sock(sk); - cancel_delayed_work_sync(&ctx->tx_work.work); - lock_sock(sk); - - /* Tx whatever records we can transmit and abandon the rest */ tls_tx_records(sk, -1); /* Free up un-sent records in tx_list. First, free @@ -2137,11 +2141,17 @@ static void tx_work_handler(struct work_struct *work) struct tx_work, work); struct sock *sk = tx_work->sk; struct tls_context *tls_ctx = tls_get_ctx(sk); - struct tls_sw_context_tx *ctx = tls_sw_ctx_tx(tls_ctx); + struct tls_sw_context_tx *ctx; - if (!test_and_clear_bit(BIT_TX_SCHEDULED, &ctx->tx_bitmask)) + if (unlikely(!tls_ctx)) return; + ctx = tls_sw_ctx_tx(tls_ctx); + if (test_bit(BIT_TX_CLOSING, &ctx->tx_bitmask)) + return; + + if (!test_and_clear_bit(BIT_TX_SCHEDULED, &ctx->tx_bitmask)) + return; lock_sock(sk); tls_tx_records(sk, -1); release_sock(sk); -- cgit From 313ab004805cf52a42673b15852b3842474ccd87 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Fri, 19 Jul 2019 10:29:17 -0700 Subject: net/tls: remove sock unlock/lock around strp_done() The tls close() callback currently drops the sock lock to call strp_done(). Split up the RX cleanup into stopping the strparser and releasing most resources, syncing strparser and finally freeing the context. To avoid the need for a strp_done() call on the cleanup path of device offload make sure we don't arm the strparser until we are sure init will be successful. Signed-off-by: John Fastabend Signed-off-by: Jakub Kicinski Reviewed-by: Dirk van der Merwe Signed-off-by: Daniel Borkmann --- include/net/tls.h | 7 +++--- net/tls/tls_device.c | 1 - net/tls/tls_main.c | 61 ++++++++++++++++++++++++++-------------------------- net/tls/tls_sw.c | 40 +++++++++++++++++++++++++--------- 4 files changed, 64 insertions(+), 45 deletions(-) diff --git a/include/net/tls.h b/include/net/tls.h index d4276cb6de53..235508e35fd4 100644 --- a/include/net/tls.h +++ b/include/net/tls.h @@ -107,9 +107,7 @@ struct tls_device { enum { TLS_BASE, TLS_SW, -#ifdef CONFIG_TLS_DEVICE TLS_HW, -#endif TLS_HW_RECORD, TLS_NUM_CONFIG, }; @@ -357,14 +355,17 @@ int tls_sk_attach(struct sock *sk, int optname, char __user *optval, int tls_set_sw_offload(struct sock *sk, struct tls_context *ctx, int tx); void tls_sw_strparser_arm(struct sock *sk, struct tls_context *ctx); +void tls_sw_strparser_done(struct tls_context *tls_ctx); int tls_sw_sendmsg(struct sock *sk, struct msghdr *msg, size_t size); int tls_sw_sendpage(struct sock *sk, struct page *page, int offset, size_t size, int flags); void tls_sw_close(struct sock *sk, long timeout); void tls_sw_cancel_work_tx(struct tls_context *tls_ctx); -void tls_sw_free_resources_tx(struct sock *sk); +void tls_sw_release_resources_tx(struct sock *sk); +void tls_sw_free_ctx_tx(struct tls_context *tls_ctx); void tls_sw_free_resources_rx(struct sock *sk); void tls_sw_release_resources_rx(struct sock *sk); +void tls_sw_free_ctx_rx(struct tls_context *tls_ctx); int tls_sw_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, int nonblock, int flags, int *addr_len); bool tls_sw_stream_read(const struct sock *sk); diff --git a/net/tls/tls_device.c b/net/tls/tls_device.c index 4d67d72f007c..7c0b2b778703 100644 --- a/net/tls/tls_device.c +++ b/net/tls/tls_device.c @@ -1045,7 +1045,6 @@ int tls_set_device_offload_rx(struct sock *sk, struct tls_context *ctx) rc = tls_set_sw_offload(sk, ctx, 0); if (rc) goto release_ctx; - tls_sw_strparser_arm(sk, ctx); rc = netdev->tlsdev_ops->tls_dev_add(netdev, sk, TLS_OFFLOAD_CTX_DIR_RX, &ctx->crypto_recv.info, diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index 5c29b410cf7d..d152a00a7a27 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -261,24 +261,9 @@ void tls_ctx_free(struct tls_context *ctx) kfree(ctx); } -static void tls_sk_proto_close(struct sock *sk, long timeout) +static void tls_sk_proto_cleanup(struct sock *sk, + struct tls_context *ctx, long timeo) { - struct tls_context *ctx = tls_get_ctx(sk); - long timeo = sock_sndtimeo(sk, 0); - void (*sk_proto_close)(struct sock *sk, long timeout); - bool free_ctx = false; - - if (ctx->tx_conf == TLS_SW) - tls_sw_cancel_work_tx(ctx); - - lock_sock(sk); - sk_proto_close = ctx->sk_proto_close; - - if (ctx->tx_conf == TLS_BASE && ctx->rx_conf == TLS_BASE) { - free_ctx = true; - goto skip_tx_cleanup; - } - if (unlikely(sk->sk_write_pending) && !wait_on_pending_writer(sk, &timeo)) tls_handle_open_record(sk, 0); @@ -287,7 +272,7 @@ static void tls_sk_proto_close(struct sock *sk, long timeout) if (ctx->tx_conf == TLS_SW) { kfree(ctx->tx.rec_seq); kfree(ctx->tx.iv); - tls_sw_free_resources_tx(sk); + tls_sw_release_resources_tx(sk); #ifdef CONFIG_TLS_DEVICE } else if (ctx->tx_conf == TLS_HW) { tls_device_free_resources_tx(sk); @@ -295,26 +280,40 @@ static void tls_sk_proto_close(struct sock *sk, long timeout) } if (ctx->rx_conf == TLS_SW) - tls_sw_free_resources_rx(sk); + tls_sw_release_resources_rx(sk); #ifdef CONFIG_TLS_DEVICE if (ctx->rx_conf == TLS_HW) tls_device_offload_cleanup_rx(sk); - - if (ctx->tx_conf != TLS_HW && ctx->rx_conf != TLS_HW) { -#else - { #endif - tls_ctx_free(ctx); - ctx = NULL; - } +} + +static void tls_sk_proto_close(struct sock *sk, long timeout) +{ + void (*sk_proto_close)(struct sock *sk, long timeout); + struct tls_context *ctx = tls_get_ctx(sk); + long timeo = sock_sndtimeo(sk, 0); + bool free_ctx; + + if (ctx->tx_conf == TLS_SW) + tls_sw_cancel_work_tx(ctx); + + lock_sock(sk); + free_ctx = ctx->tx_conf != TLS_HW && ctx->rx_conf != TLS_HW; + sk_proto_close = ctx->sk_proto_close; + + if (ctx->tx_conf != TLS_BASE || ctx->rx_conf != TLS_BASE) + tls_sk_proto_cleanup(sk, ctx, timeo); -skip_tx_cleanup: release_sock(sk); + if (ctx->tx_conf == TLS_SW) + tls_sw_free_ctx_tx(ctx); + if (ctx->rx_conf == TLS_SW || ctx->rx_conf == TLS_HW) + tls_sw_strparser_done(ctx); + if (ctx->rx_conf == TLS_SW) + tls_sw_free_ctx_rx(ctx); sk_proto_close(sk, timeout); - /* free ctx for TLS_HW_RECORD, used by tcp_set_state - * for sk->sk_prot->unhash [tls_hw_unhash] - */ + if (free_ctx) tls_ctx_free(ctx); } @@ -541,9 +540,9 @@ static int do_tls_setsockopt_conf(struct sock *sk, char __user *optval, rc = tls_set_sw_offload(sk, ctx, 0); if (rc) goto err_crypto_info; - tls_sw_strparser_arm(sk, ctx); conf = TLS_SW; } + tls_sw_strparser_arm(sk, ctx); } if (tx) diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index 38c0e53c727d..91d21b048a9b 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -2063,7 +2063,7 @@ void tls_sw_cancel_work_tx(struct tls_context *tls_ctx) cancel_delayed_work_sync(&ctx->tx_work.work); } -void tls_sw_free_resources_tx(struct sock *sk) +void tls_sw_release_resources_tx(struct sock *sk) { struct tls_context *tls_ctx = tls_get_ctx(sk); struct tls_sw_context_tx *ctx = tls_sw_ctx_tx(tls_ctx); @@ -2096,6 +2096,11 @@ void tls_sw_free_resources_tx(struct sock *sk) crypto_free_aead(ctx->aead_send); tls_free_open_rec(sk); +} + +void tls_sw_free_ctx_tx(struct tls_context *tls_ctx) +{ + struct tls_sw_context_tx *ctx = tls_sw_ctx_tx(tls_ctx); kfree(ctx); } @@ -2114,25 +2119,40 @@ void tls_sw_release_resources_rx(struct sock *sk) skb_queue_purge(&ctx->rx_list); crypto_free_aead(ctx->aead_recv); strp_stop(&ctx->strp); - write_lock_bh(&sk->sk_callback_lock); - sk->sk_data_ready = ctx->saved_data_ready; - write_unlock_bh(&sk->sk_callback_lock); - release_sock(sk); - strp_done(&ctx->strp); - lock_sock(sk); + /* If tls_sw_strparser_arm() was not called (cleanup paths) + * we still want to strp_stop(), but sk->sk_data_ready was + * never swapped. + */ + if (ctx->saved_data_ready) { + write_lock_bh(&sk->sk_callback_lock); + sk->sk_data_ready = ctx->saved_data_ready; + write_unlock_bh(&sk->sk_callback_lock); + } } } -void tls_sw_free_resources_rx(struct sock *sk) +void tls_sw_strparser_done(struct tls_context *tls_ctx) { - struct tls_context *tls_ctx = tls_get_ctx(sk); struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx); - tls_sw_release_resources_rx(sk); + strp_done(&ctx->strp); +} + +void tls_sw_free_ctx_rx(struct tls_context *tls_ctx) +{ + struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx); kfree(ctx); } +void tls_sw_free_resources_rx(struct sock *sk) +{ + struct tls_context *tls_ctx = tls_get_ctx(sk); + + tls_sw_release_resources_rx(sk); + tls_sw_free_ctx_rx(tls_ctx); +} + /* The work handler to transmitt the encrypted records in tx_list */ static void tx_work_handler(struct work_struct *work) { -- cgit From 32857cf57f920cdc03b5095f08febec94cf9c36b Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Fri, 19 Jul 2019 10:29:18 -0700 Subject: net/tls: fix transition through disconnect with close It is possible (via shutdown()) for TCP socks to go through TCP_CLOSE state via tcp_disconnect() without actually calling tcp_close which would then call the tls close callback. Because of this a user could disconnect a socket then put it in a LISTEN state which would break our assumptions about sockets always being ESTABLISHED state. More directly because close() can call unhash() and unhash is implemented by sockmap if a sockmap socket has TLS enabled we can incorrectly destroy the psock from unhash() and then call its close handler again. But because the psock (sockmap socket representation) is already destroyed we call close handler in sk->prot. However, in some cases (TLS BASE/BASE case) this will still point at the sockmap close handler resulting in a circular call and crash reported by syzbot. To fix both above issues implement the unhash() routine for TLS. v4: - add note about tls offload still needing the fix; - move sk_proto to the cold cache line; - split TX context free into "release" and "free", otherwise the GC work itself is in already freed memory; - more TX before RX for consistency; - reuse tls_ctx_free(); - schedule the GC work after we're done with context to avoid UAF; - don't set the unhash in all modes, all modes "inherit" TLS_BASE's callbacks anyway; - disable the unhash hook for TLS_HW. Fixes: 3c4d7559159bf ("tls: kernel TLS support") Reported-by: Eric Dumazet Signed-off-by: John Fastabend Signed-off-by: Jakub Kicinski Signed-off-by: Daniel Borkmann --- Documentation/networking/tls-offload.rst | 6 ++++ include/net/tls.h | 5 ++- net/tls/tls_main.c | 55 ++++++++++++++++++++++++++++++++ 3 files changed, 65 insertions(+), 1 deletion(-) diff --git a/Documentation/networking/tls-offload.rst b/Documentation/networking/tls-offload.rst index 048e5ca44824..8a1eeb393316 100644 --- a/Documentation/networking/tls-offload.rst +++ b/Documentation/networking/tls-offload.rst @@ -513,3 +513,9 @@ Redirects leak clear text In the RX direction, if segment has already been decrypted by the device and it gets redirected or mirrored - clear text will be transmitted out. + +shutdown() doesn't clear TLS state +---------------------------------- + +shutdown() system call allows for a TLS socket to be reused as a different +connection. Offload doesn't currently handle that. diff --git a/include/net/tls.h b/include/net/tls.h index 235508e35fd4..9e425ac2de45 100644 --- a/include/net/tls.h +++ b/include/net/tls.h @@ -271,6 +271,8 @@ struct tls_context { unsigned long flags; /* cache cold stuff */ + struct proto *sk_proto; + void (*sk_destruct)(struct sock *sk); void (*sk_proto_close)(struct sock *sk, long timeout); @@ -288,6 +290,8 @@ struct tls_context { struct list_head list; refcount_t refcount; + + struct work_struct gc; }; enum tls_offload_ctx_dir { @@ -359,7 +363,6 @@ void tls_sw_strparser_done(struct tls_context *tls_ctx); int tls_sw_sendmsg(struct sock *sk, struct msghdr *msg, size_t size); int tls_sw_sendpage(struct sock *sk, struct page *page, int offset, size_t size, int flags); -void tls_sw_close(struct sock *sk, long timeout); void tls_sw_cancel_work_tx(struct tls_context *tls_ctx); void tls_sw_release_resources_tx(struct sock *sk); void tls_sw_free_ctx_tx(struct tls_context *tls_ctx); diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index d152a00a7a27..48f1c26459d0 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -261,6 +261,33 @@ void tls_ctx_free(struct tls_context *ctx) kfree(ctx); } +static void tls_ctx_free_deferred(struct work_struct *gc) +{ + struct tls_context *ctx = container_of(gc, struct tls_context, gc); + + /* Ensure any remaining work items are completed. The sk will + * already have lost its tls_ctx reference by the time we get + * here so no xmit operation will actually be performed. + */ + if (ctx->tx_conf == TLS_SW) { + tls_sw_cancel_work_tx(ctx); + tls_sw_free_ctx_tx(ctx); + } + + if (ctx->rx_conf == TLS_SW) { + tls_sw_strparser_done(ctx); + tls_sw_free_ctx_rx(ctx); + } + + tls_ctx_free(ctx); +} + +static void tls_ctx_free_wq(struct tls_context *ctx) +{ + INIT_WORK(&ctx->gc, tls_ctx_free_deferred); + schedule_work(&ctx->gc); +} + static void tls_sk_proto_cleanup(struct sock *sk, struct tls_context *ctx, long timeo) { @@ -288,6 +315,26 @@ static void tls_sk_proto_cleanup(struct sock *sk, #endif } +static void tls_sk_proto_unhash(struct sock *sk) +{ + struct inet_connection_sock *icsk = inet_csk(sk); + long timeo = sock_sndtimeo(sk, 0); + struct tls_context *ctx; + + if (unlikely(!icsk->icsk_ulp_data)) { + if (sk->sk_prot->unhash) + sk->sk_prot->unhash(sk); + } + + ctx = tls_get_ctx(sk); + tls_sk_proto_cleanup(sk, ctx, timeo); + icsk->icsk_ulp_data = NULL; + + if (ctx->sk_proto->unhash) + ctx->sk_proto->unhash(sk); + tls_ctx_free_wq(ctx); +} + static void tls_sk_proto_close(struct sock *sk, long timeout) { void (*sk_proto_close)(struct sock *sk, long timeout); @@ -305,6 +352,7 @@ static void tls_sk_proto_close(struct sock *sk, long timeout) if (ctx->tx_conf != TLS_BASE || ctx->rx_conf != TLS_BASE) tls_sk_proto_cleanup(sk, ctx, timeo); + sk->sk_prot = ctx->sk_proto; release_sock(sk); if (ctx->tx_conf == TLS_SW) tls_sw_free_ctx_tx(ctx); @@ -608,6 +656,7 @@ static struct tls_context *create_ctx(struct sock *sk) ctx->setsockopt = sk->sk_prot->setsockopt; ctx->getsockopt = sk->sk_prot->getsockopt; ctx->sk_proto_close = sk->sk_prot->close; + ctx->unhash = sk->sk_prot->unhash; return ctx; } @@ -731,6 +780,7 @@ static void build_protos(struct proto prot[TLS_NUM_CONFIG][TLS_NUM_CONFIG], prot[TLS_BASE][TLS_BASE].setsockopt = tls_setsockopt; prot[TLS_BASE][TLS_BASE].getsockopt = tls_getsockopt; prot[TLS_BASE][TLS_BASE].close = tls_sk_proto_close; + prot[TLS_BASE][TLS_BASE].unhash = tls_sk_proto_unhash; prot[TLS_SW][TLS_BASE] = prot[TLS_BASE][TLS_BASE]; prot[TLS_SW][TLS_BASE].sendmsg = tls_sw_sendmsg; @@ -748,16 +798,20 @@ static void build_protos(struct proto prot[TLS_NUM_CONFIG][TLS_NUM_CONFIG], #ifdef CONFIG_TLS_DEVICE prot[TLS_HW][TLS_BASE] = prot[TLS_BASE][TLS_BASE]; + prot[TLS_HW][TLS_BASE].unhash = base->unhash; prot[TLS_HW][TLS_BASE].sendmsg = tls_device_sendmsg; prot[TLS_HW][TLS_BASE].sendpage = tls_device_sendpage; prot[TLS_HW][TLS_SW] = prot[TLS_BASE][TLS_SW]; + prot[TLS_HW][TLS_SW].unhash = base->unhash; prot[TLS_HW][TLS_SW].sendmsg = tls_device_sendmsg; prot[TLS_HW][TLS_SW].sendpage = tls_device_sendpage; prot[TLS_BASE][TLS_HW] = prot[TLS_BASE][TLS_SW]; + prot[TLS_BASE][TLS_HW].unhash = base->unhash; prot[TLS_SW][TLS_HW] = prot[TLS_SW][TLS_SW]; + prot[TLS_SW][TLS_HW].unhash = base->unhash; prot[TLS_HW][TLS_HW] = prot[TLS_HW][TLS_SW]; #endif @@ -794,6 +848,7 @@ static int tls_init(struct sock *sk) tls_build_proto(sk); ctx->tx_conf = TLS_BASE; ctx->rx_conf = TLS_BASE; + ctx->sk_proto = sk->sk_prot; update_sk_prot(sk, ctx); out: return rc; -- cgit From 45a4521dcbd92e71c9e53031b40e34211d3b4feb Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Fri, 19 Jul 2019 10:29:19 -0700 Subject: bpf: sockmap, sock_map_delete needs to use xchg __sock_map_delete() may be called from a tcp event such as unhash or close from the following trace, tcp_bpf_close() tcp_bpf_remove() sk_psock_unlink() sock_map_delete_from_link() __sock_map_delete() In this case the sock lock is held but this only protects against duplicate removals on the TCP side. If the map is free'd then we have this trace, sock_map_free xchg() <- replaces map entry sock_map_unref() sk_psock_put() sock_map_del_link() The __sock_map_delete() call however uses a read, test, null over the map entry which can result in both paths trying to free the map entry. To fix use xchg in TCP paths as well so we avoid having two references to the same map entry. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend Signed-off-by: Daniel Borkmann --- net/core/sock_map.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/net/core/sock_map.c b/net/core/sock_map.c index 52d4faeee18b..28702f2e9a4a 100644 --- a/net/core/sock_map.c +++ b/net/core/sock_map.c @@ -276,16 +276,20 @@ static int __sock_map_delete(struct bpf_stab *stab, struct sock *sk_test, struct sock **psk) { struct sock *sk; + int err = 0; raw_spin_lock_bh(&stab->lock); sk = *psk; if (!sk_test || sk_test == sk) - *psk = NULL; + sk = xchg(psk, NULL); + + if (likely(sk)) + sock_map_unref(sk, psk); + else + err = -EINVAL; + raw_spin_unlock_bh(&stab->lock); - if (unlikely(!sk)) - return -EINVAL; - sock_map_unref(sk, psk); - return 0; + return err; } static void sock_map_delete_from_link(struct bpf_map *map, struct sock *sk, -- cgit From 2bb90e5cc90e1d09f631aeab041a9cf913a5bbe5 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Fri, 19 Jul 2019 10:29:20 -0700 Subject: bpf: sockmap, synchronize_rcu before free'ing map We need to have a synchronize_rcu before free'ing the sockmap because any outstanding psock references will have a pointer to the map and when they use this could trigger a use after free. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend Signed-off-by: Daniel Borkmann --- net/core/sock_map.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/core/sock_map.c b/net/core/sock_map.c index 28702f2e9a4a..56bcabe7c2f2 100644 --- a/net/core/sock_map.c +++ b/net/core/sock_map.c @@ -247,6 +247,8 @@ static void sock_map_free(struct bpf_map *map) raw_spin_unlock_bh(&stab->lock); rcu_read_unlock(); + synchronize_rcu(); + bpf_map_area_free(stab->sks); kfree(stab); } -- cgit From 0e858739c2d2eedeeac1d35bfa0ec3cc2a7190d8 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Fri, 19 Jul 2019 10:29:21 -0700 Subject: bpf: sockmap, only create entry if ulp is not already enabled Sockmap does not currently support adding sockets after TLS has been enabled. There never was a real use case for this so it was never added. But, we lost the test for ULP at some point so add it here and fail the socket insert if TLS is enabled. Future work could make sockmap support this use case but fixup the bug here. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend Signed-off-by: Daniel Borkmann --- net/core/sock_map.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/core/sock_map.c b/net/core/sock_map.c index 56bcabe7c2f2..1330a7442e5b 100644 --- a/net/core/sock_map.c +++ b/net/core/sock_map.c @@ -334,6 +334,7 @@ static int sock_map_update_common(struct bpf_map *map, u32 idx, struct sock *sk, u64 flags) { struct bpf_stab *stab = container_of(map, struct bpf_stab, map); + struct inet_connection_sock *icsk = inet_csk(sk); struct sk_psock_link *link; struct sk_psock *psock; struct sock *osk; @@ -344,6 +345,8 @@ static int sock_map_update_common(struct bpf_map *map, u32 idx, return -EINVAL; if (unlikely(idx >= map->max_entries)) return -E2BIG; + if (unlikely(icsk->icsk_ulp_data)) + return -EINVAL; link = sk_psock_init_link(); if (!link) -- cgit From 95fa145479fbc0a0c1fd3274ceb42ec03c042a4a Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Fri, 19 Jul 2019 10:29:22 -0700 Subject: bpf: sockmap/tls, close can race with map free When a map free is called and in parallel a socket is closed we have two paths that can potentially reset the socket prot ops, the bpf close() path and the map free path. This creates a problem with which prot ops should be used from the socket closed side. If the map_free side completes first then we want to call the original lowest level ops. However, if the tls path runs first we want to call the sockmap ops. Additionally there was no locking around prot updates in TLS code paths so the prot ops could be changed multiple times once from TLS path and again from sockmap side potentially leaving ops pointed at either TLS or sockmap when psock and/or tls context have already been destroyed. To fix this race first only update ops inside callback lock so that TLS, sockmap and lowest level all agree on prot state. Second and a ULP callback update() so that lower layers can inform the upper layer when they are being removed allowing the upper layer to reset prot ops. This gets us close to allowing sockmap and tls to be stacked in arbitrary order but will save that patch for *next trees. v4: - make sure we don't free things for device; - remove the checks which swap the callbacks back only if TLS is at the top. Reported-by: syzbot+06537213db7ba2745c4a@syzkaller.appspotmail.com Fixes: 02c558b2d5d6 ("bpf: sockmap, support for msg_peek in sk_msg with redirect ingress") Signed-off-by: John Fastabend Signed-off-by: Jakub Kicinski Reviewed-by: Dirk van der Merwe Signed-off-by: Daniel Borkmann --- include/linux/skmsg.h | 8 +++++++- include/net/tcp.h | 3 +++ net/core/skmsg.c | 4 ++-- net/ipv4/tcp_ulp.c | 13 +++++++++++++ net/tls/tls_main.c | 33 ++++++++++++++++++++++++++++----- 5 files changed, 53 insertions(+), 8 deletions(-) diff --git a/include/linux/skmsg.h b/include/linux/skmsg.h index 50ced8aba9db..e4b3fb4bb77c 100644 --- a/include/linux/skmsg.h +++ b/include/linux/skmsg.h @@ -354,7 +354,13 @@ static inline void sk_psock_restore_proto(struct sock *sk, sk->sk_write_space = psock->saved_write_space; if (psock->sk_proto) { - sk->sk_prot = psock->sk_proto; + struct inet_connection_sock *icsk = inet_csk(sk); + bool has_ulp = !!icsk->icsk_ulp_data; + + if (has_ulp) + tcp_update_ulp(sk, psock->sk_proto); + else + sk->sk_prot = psock->sk_proto; psock->sk_proto = NULL; } } diff --git a/include/net/tcp.h b/include/net/tcp.h index f42d300f0cfa..c82a23470081 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -2103,6 +2103,8 @@ struct tcp_ulp_ops { /* initialize ulp */ int (*init)(struct sock *sk); + /* update ulp */ + void (*update)(struct sock *sk, struct proto *p); /* cleanup ulp */ void (*release)(struct sock *sk); @@ -2114,6 +2116,7 @@ void tcp_unregister_ulp(struct tcp_ulp_ops *type); int tcp_set_ulp(struct sock *sk, const char *name); void tcp_get_available_ulp(char *buf, size_t len); void tcp_cleanup_ulp(struct sock *sk); +void tcp_update_ulp(struct sock *sk, struct proto *p); #define MODULE_ALIAS_TCP_ULP(name) \ __MODULE_INFO(alias, alias_userspace, name); \ diff --git a/net/core/skmsg.c b/net/core/skmsg.c index 93bffaad2135..6832eeb4b785 100644 --- a/net/core/skmsg.c +++ b/net/core/skmsg.c @@ -585,12 +585,12 @@ EXPORT_SYMBOL_GPL(sk_psock_destroy); void sk_psock_drop(struct sock *sk, struct sk_psock *psock) { - rcu_assign_sk_user_data(sk, NULL); sk_psock_cork_free(psock); sk_psock_zap_ingress(psock); - sk_psock_restore_proto(sk, psock); write_lock_bh(&sk->sk_callback_lock); + sk_psock_restore_proto(sk, psock); + rcu_assign_sk_user_data(sk, NULL); if (psock->progs.skb_parser) sk_psock_stop_strp(sk, psock); write_unlock_bh(&sk->sk_callback_lock); diff --git a/net/ipv4/tcp_ulp.c b/net/ipv4/tcp_ulp.c index 3d8a1d835471..4849edb62d52 100644 --- a/net/ipv4/tcp_ulp.c +++ b/net/ipv4/tcp_ulp.c @@ -96,6 +96,19 @@ void tcp_get_available_ulp(char *buf, size_t maxlen) rcu_read_unlock(); } +void tcp_update_ulp(struct sock *sk, struct proto *proto) +{ + struct inet_connection_sock *icsk = inet_csk(sk); + + if (!icsk->icsk_ulp_ops) { + sk->sk_prot = proto; + return; + } + + if (icsk->icsk_ulp_ops->update) + icsk->icsk_ulp_ops->update(sk, proto); +} + void tcp_cleanup_ulp(struct sock *sk) { struct inet_connection_sock *icsk = inet_csk(sk); diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index 48f1c26459d0..f208f8455ef2 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -328,7 +328,10 @@ static void tls_sk_proto_unhash(struct sock *sk) ctx = tls_get_ctx(sk); tls_sk_proto_cleanup(sk, ctx, timeo); + write_lock_bh(&sk->sk_callback_lock); icsk->icsk_ulp_data = NULL; + sk->sk_prot = ctx->sk_proto; + write_unlock_bh(&sk->sk_callback_lock); if (ctx->sk_proto->unhash) ctx->sk_proto->unhash(sk); @@ -337,7 +340,7 @@ static void tls_sk_proto_unhash(struct sock *sk) static void tls_sk_proto_close(struct sock *sk, long timeout) { - void (*sk_proto_close)(struct sock *sk, long timeout); + struct inet_connection_sock *icsk = inet_csk(sk); struct tls_context *ctx = tls_get_ctx(sk); long timeo = sock_sndtimeo(sk, 0); bool free_ctx; @@ -347,12 +350,15 @@ static void tls_sk_proto_close(struct sock *sk, long timeout) lock_sock(sk); free_ctx = ctx->tx_conf != TLS_HW && ctx->rx_conf != TLS_HW; - sk_proto_close = ctx->sk_proto_close; if (ctx->tx_conf != TLS_BASE || ctx->rx_conf != TLS_BASE) tls_sk_proto_cleanup(sk, ctx, timeo); + write_lock_bh(&sk->sk_callback_lock); + if (free_ctx) + icsk->icsk_ulp_data = NULL; sk->sk_prot = ctx->sk_proto; + write_unlock_bh(&sk->sk_callback_lock); release_sock(sk); if (ctx->tx_conf == TLS_SW) tls_sw_free_ctx_tx(ctx); @@ -360,7 +366,7 @@ static void tls_sk_proto_close(struct sock *sk, long timeout) tls_sw_strparser_done(ctx); if (ctx->rx_conf == TLS_SW) tls_sw_free_ctx_rx(ctx); - sk_proto_close(sk, timeout); + ctx->sk_proto_close(sk, timeout); if (free_ctx) tls_ctx_free(ctx); @@ -827,7 +833,7 @@ static int tls_init(struct sock *sk) int rc = 0; if (tls_hw_prot(sk)) - goto out; + return 0; /* The TLS ulp is currently supported only for TCP sockets * in ESTABLISHED state. @@ -838,22 +844,38 @@ static int tls_init(struct sock *sk) if (sk->sk_state != TCP_ESTABLISHED) return -ENOTSUPP; + tls_build_proto(sk); + /* allocate tls context */ + write_lock_bh(&sk->sk_callback_lock); ctx = create_ctx(sk); if (!ctx) { rc = -ENOMEM; goto out; } - tls_build_proto(sk); ctx->tx_conf = TLS_BASE; ctx->rx_conf = TLS_BASE; ctx->sk_proto = sk->sk_prot; update_sk_prot(sk, ctx); out: + write_unlock_bh(&sk->sk_callback_lock); return rc; } +static void tls_update(struct sock *sk, struct proto *p) +{ + struct tls_context *ctx; + + ctx = tls_get_ctx(sk); + if (likely(ctx)) { + ctx->sk_proto_close = p->close; + ctx->sk_proto = p; + } else { + sk->sk_prot = p; + } +} + void tls_register_device(struct tls_device *device) { spin_lock_bh(&device_spinlock); @@ -874,6 +896,7 @@ static struct tcp_ulp_ops tcp_tls_ulp_ops __read_mostly = { .name = "tls", .owner = THIS_MODULE, .init = tls_init, + .update = tls_update, }; static int __init tls_register(void) -- cgit From cf32526c8842781e32d6652a1e01e83b20490948 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 19 Jul 2019 10:29:23 -0700 Subject: selftests/tls: add a test for ULP but no keys Make sure we test the TLS_BASE/TLS_BASE case both with data and the tear down/clean up path. Signed-off-by: Jakub Kicinski Reviewed-by: Dirk van der Merwe Signed-off-by: Daniel Borkmann --- tools/testing/selftests/net/tls.c | 74 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c index 090fff9dbc48..194826fee4f7 100644 --- a/tools/testing/selftests/net/tls.c +++ b/tools/testing/selftests/net/tls.c @@ -25,6 +25,80 @@ #define TLS_PAYLOAD_MAX_LEN 16384 #define SOL_TLS 282 +#ifndef ENOTSUPP +#define ENOTSUPP 524 +#endif + +FIXTURE(tls_basic) +{ + int fd, cfd; + bool notls; +}; + +FIXTURE_SETUP(tls_basic) +{ + struct sockaddr_in addr; + socklen_t len; + int sfd, ret; + + self->notls = false; + len = sizeof(addr); + + addr.sin_family = AF_INET; + addr.sin_addr.s_addr = htonl(INADDR_ANY); + addr.sin_port = 0; + + self->fd = socket(AF_INET, SOCK_STREAM, 0); + sfd = socket(AF_INET, SOCK_STREAM, 0); + + ret = bind(sfd, &addr, sizeof(addr)); + ASSERT_EQ(ret, 0); + ret = listen(sfd, 10); + ASSERT_EQ(ret, 0); + + ret = getsockname(sfd, &addr, &len); + ASSERT_EQ(ret, 0); + + ret = connect(self->fd, &addr, sizeof(addr)); + ASSERT_EQ(ret, 0); + + self->cfd = accept(sfd, &addr, &len); + ASSERT_GE(self->cfd, 0); + + close(sfd); + + ret = setsockopt(self->fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls")); + if (ret != 0) { + ASSERT_EQ(errno, ENOTSUPP); + self->notls = true; + printf("Failure setting TCP_ULP, testing without tls\n"); + return; + } + + ret = setsockopt(self->cfd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls")); + ASSERT_EQ(ret, 0); +} + +FIXTURE_TEARDOWN(tls_basic) +{ + close(self->fd); + close(self->cfd); +} + +/* Send some data through with ULP but no keys */ +TEST_F(tls_basic, base_base) +{ + char const *test_str = "test_read"; + int send_len = 10; + char buf[10]; + + ASSERT_EQ(strlen(test_str) + 1, send_len); + + EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len); + EXPECT_NE(recv(self->cfd, buf, send_len, 0), -1); + EXPECT_EQ(memcmp(buf, test_str, send_len), 0); +}; + FIXTURE(tls) { int fd, cfd; -- cgit From 78b5dc3d68dcb1d18d805e8f4e565f19ed6d976a Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 19 Jul 2019 10:29:24 -0700 Subject: selftests/tls: test error codes around TLS ULP installation Test the error codes returned when TCP connection is not in ESTABLISHED state. Signed-off-by: Jakub Kicinski Reviewed-by: Dirk van der Merwe Signed-off-by: Daniel Borkmann --- tools/testing/selftests/net/tls.c | 52 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c index 194826fee4f7..10df77326d34 100644 --- a/tools/testing/selftests/net/tls.c +++ b/tools/testing/selftests/net/tls.c @@ -911,6 +911,58 @@ TEST_F(tls, control_msg) EXPECT_EQ(memcmp(buf, test_str, send_len), 0); } +TEST(non_established) { + struct tls12_crypto_info_aes_gcm_256 tls12; + struct sockaddr_in addr; + int sfd, ret, fd; + socklen_t len; + + len = sizeof(addr); + + memset(&tls12, 0, sizeof(tls12)); + tls12.info.version = TLS_1_2_VERSION; + tls12.info.cipher_type = TLS_CIPHER_AES_GCM_256; + + addr.sin_family = AF_INET; + addr.sin_addr.s_addr = htonl(INADDR_ANY); + addr.sin_port = 0; + + fd = socket(AF_INET, SOCK_STREAM, 0); + sfd = socket(AF_INET, SOCK_STREAM, 0); + + ret = bind(sfd, &addr, sizeof(addr)); + ASSERT_EQ(ret, 0); + ret = listen(sfd, 10); + ASSERT_EQ(ret, 0); + + ret = setsockopt(fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls")); + EXPECT_EQ(ret, -1); + /* TLS ULP not supported */ + if (errno == ENOENT) + return; + EXPECT_EQ(errno, ENOTSUPP); + + ret = setsockopt(sfd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls")); + EXPECT_EQ(ret, -1); + EXPECT_EQ(errno, ENOTSUPP); + + ret = getsockname(sfd, &addr, &len); + ASSERT_EQ(ret, 0); + + ret = connect(fd, &addr, sizeof(addr)); + ASSERT_EQ(ret, 0); + + ret = setsockopt(fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls")); + ASSERT_EQ(ret, 0); + + ret = setsockopt(fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls")); + EXPECT_EQ(ret, -1); + EXPECT_EQ(errno, EEXIST); + + close(fd); + close(sfd); +} + TEST(keysizes) { struct tls12_crypto_info_aes_gcm_256 tls12; struct sockaddr_in addr; -- cgit From 65d41fb317c62b7c8663a134e88eaee439f270d6 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 19 Jul 2019 10:29:25 -0700 Subject: selftests/tls: add a bidirectional test Add a simple test which installs the TLS state for both directions, sends and receives data on both sockets. Signed-off-by: Jakub Kicinski Reviewed-by: Dirk van der Merwe Signed-off-by: Daniel Borkmann --- tools/testing/selftests/net/tls.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c index 10df77326d34..6d78bd050813 100644 --- a/tools/testing/selftests/net/tls.c +++ b/tools/testing/selftests/net/tls.c @@ -684,6 +684,37 @@ TEST_F(tls, recv_lowat) EXPECT_EQ(memcmp(send_mem, recv_mem + 10, 5), 0); } +TEST_F(tls, bidir) +{ + struct tls12_crypto_info_aes_gcm_128 tls12; + char const *test_str = "test_read"; + int send_len = 10; + char buf[10]; + int ret; + + memset(&tls12, 0, sizeof(tls12)); + tls12.info.version = TLS_1_3_VERSION; + tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128; + + ret = setsockopt(self->fd, SOL_TLS, TLS_RX, &tls12, sizeof(tls12)); + ASSERT_EQ(ret, 0); + + ret = setsockopt(self->cfd, SOL_TLS, TLS_TX, &tls12, sizeof(tls12)); + ASSERT_EQ(ret, 0); + + ASSERT_EQ(strlen(test_str) + 1, send_len); + + EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len); + EXPECT_NE(recv(self->cfd, buf, send_len, 0), -1); + EXPECT_EQ(memcmp(buf, test_str, send_len), 0); + + memset(buf, 0, sizeof(buf)); + + EXPECT_EQ(send(self->cfd, test_str, send_len, 0), send_len); + EXPECT_NE(recv(self->fd, buf, send_len, 0), -1); + EXPECT_EQ(memcmp(buf, test_str, send_len), 0); +}; + TEST_F(tls, pollin) { char const *test_str = "test_poll"; -- cgit From 8051bb7f2cbf68ec1289753616703791dd004b5c Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 19 Jul 2019 10:29:26 -0700 Subject: selftests/tls: close the socket with open record Add test which sends some data with MSG_MORE and then closes the socket (never calling send without MSG_MORE). This should make sure we clean up open records correctly. Signed-off-by: Jakub Kicinski Reviewed-by: Dirk van der Merwe Signed-off-by: Daniel Borkmann --- tools/testing/selftests/net/tls.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c index 6d78bd050813..94a86ca882de 100644 --- a/tools/testing/selftests/net/tls.c +++ b/tools/testing/selftests/net/tls.c @@ -239,6 +239,16 @@ TEST_F(tls, msg_more) EXPECT_EQ(memcmp(buf, test_str, send_len), 0); } +TEST_F(tls, msg_more_unsent) +{ + char const *test_str = "test_read"; + int send_len = 10; + char buf[10]; + + EXPECT_EQ(send(self->fd, test_str, send_len, MSG_MORE), send_len); + EXPECT_EQ(recv(self->cfd, buf, send_len, MSG_DONTWAIT), -1); +} + TEST_F(tls, sendmsg_single) { struct msghdr msg; -- cgit From d4d34185e710750ad748a0f0a73e8cdac7480bfc Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 19 Jul 2019 10:29:27 -0700 Subject: selftests/tls: add shutdown tests Add test for killing the connection via shutdown. Signed-off-by: Jakub Kicinski Reviewed-by: Dirk van der Merwe Signed-off-by: Daniel Borkmann --- tools/testing/selftests/net/tls.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c index 94a86ca882de..630c5b884d43 100644 --- a/tools/testing/selftests/net/tls.c +++ b/tools/testing/selftests/net/tls.c @@ -952,6 +952,33 @@ TEST_F(tls, control_msg) EXPECT_EQ(memcmp(buf, test_str, send_len), 0); } +TEST_F(tls, shutdown) +{ + char const *test_str = "test_read"; + int send_len = 10; + char buf[10]; + + ASSERT_EQ(strlen(test_str) + 1, send_len); + + EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len); + EXPECT_NE(recv(self->cfd, buf, send_len, 0), -1); + EXPECT_EQ(memcmp(buf, test_str, send_len), 0); + + shutdown(self->fd, SHUT_RDWR); + shutdown(self->cfd, SHUT_RDWR); +} + +TEST_F(tls, shutdown_unsent) +{ + char const *test_str = "test_read"; + int send_len = 10; + + EXPECT_EQ(send(self->fd, test_str, send_len, MSG_MORE), send_len); + + shutdown(self->fd, SHUT_RDWR); + shutdown(self->cfd, SHUT_RDWR); +} + TEST(non_established) { struct tls12_crypto_info_aes_gcm_256 tls12; struct sockaddr_in addr; -- cgit From cdb2f9207109c9c858277fde8b7dc1445b9f952e Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 19 Jul 2019 11:34:06 -0300 Subject: libbpf: Fix endianness macro usage for some compilers Using endian.h and its endianness macros makes this code build in a wider range of compilers, as some don't have those macros (__BYTE_ORDER__, __ORDER_LITTLE_ENDIAN__, __ORDER_BIG_ENDIAN__), so use instead endian.h's macros (__BYTE_ORDER, __LITTLE_ENDIAN, __BIG_ENDIAN) which makes this code even shorter :-) Acked-by: Andrii Nakryiko Cc: Adrian Hunter Cc: Alexei Starovoitov Cc: Daniel Borkmann Cc: Jiri Olsa Cc: Namhyung Kim Fixes: 12ef5634a855 ("libbpf: simplify endianness check") Fixes: e6c64855fd7a ("libbpf: add btf__parse_elf API to load .BTF and .BTF.ext") Link: https://lkml.kernel.org/n/tip-eep5n8vgwcdphw3uc058k03u@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Daniel Borkmann --- tools/lib/bpf/btf.c | 5 +++-- tools/lib/bpf/libbpf.c | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/tools/lib/bpf/btf.c b/tools/lib/bpf/btf.c index 467224feb43b..d821107f55f9 100644 --- a/tools/lib/bpf/btf.c +++ b/tools/lib/bpf/btf.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) /* Copyright (c) 2018 Facebook */ +#include #include #include #include @@ -419,9 +420,9 @@ done: static bool btf_check_endianness(const GElf_Ehdr *ehdr) { -#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ +#if __BYTE_ORDER == __LITTLE_ENDIAN return ehdr->e_ident[EI_DATA] == ELFDATA2LSB; -#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ +#elif __BYTE_ORDER == __BIG_ENDIAN return ehdr->e_ident[EI_DATA] == ELFDATA2MSB; #else # error "Unrecognized __BYTE_ORDER__" diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index d8833ff6c4a1..c4ea239abff3 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -612,10 +613,10 @@ errout: static int bpf_object__check_endianness(struct bpf_object *obj) { -#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__ +#if __BYTE_ORDER == __LITTLE_ENDIAN if (obj->efile.ehdr.e_ident[EI_DATA] == ELFDATA2LSB) return 0; -#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ +#elif __BYTE_ORDER == __BIG_ENDIAN if (obj->efile.ehdr.e_ident[EI_DATA] == ELFDATA2MSB) return 0; #else -- cgit From 4be6e05c4d4c2ff87750d3242f69999245d119f8 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 19 Jul 2019 11:34:07 -0300 Subject: libbpf: Avoid designated initializers for unnamed union members As it fails to build in some systems with: libbpf.c: In function 'perf_buffer__new': libbpf.c:4515: error: unknown field 'sample_period' specified in initializer libbpf.c:4516: error: unknown field 'wakeup_events' specified in initializer Doing as: attr.sample_period = 1; I.e. not as a designated initializer makes it build everywhere. Cc: Andrii Nakryiko Cc: Adrian Hunter Cc: Daniel Borkmann Cc: Jiri Olsa Cc: Namhyung Kim Fixes: fb84b8224655 ("libbpf: add perf buffer API") Link: https://lkml.kernel.org/n/tip-hnlmch8qit1ieksfppmr32si@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo Acked-by: Andrii Nakryiko Signed-off-by: Daniel Borkmann --- tools/lib/bpf/libbpf.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index c4ea239abff3..2586b6cb8f34 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -4519,13 +4519,13 @@ struct perf_buffer *perf_buffer__new(int map_fd, size_t page_cnt, const struct perf_buffer_opts *opts) { struct perf_buffer_params p = {}; - struct perf_event_attr attr = { - .config = PERF_COUNT_SW_BPF_OUTPUT, - .type = PERF_TYPE_SOFTWARE, - .sample_type = PERF_SAMPLE_RAW, - .sample_period = 1, - .wakeup_events = 1, - }; + struct perf_event_attr attr = { 0, }; + + attr.config = PERF_COUNT_SW_BPF_OUTPUT, + attr.type = PERF_TYPE_SOFTWARE; + attr.sample_type = PERF_SAMPLE_RAW; + attr.sample_period = 1; + attr.wakeup_events = 1; p.attr = &attr; p.sample_cb = opts ? opts->sample_cb : NULL; -- cgit From c8eee4135a456bc031d67cadc454e76880d1afd8 Mon Sep 17 00:00:00 2001 From: Ilya Leoshkevich Date: Fri, 19 Jul 2019 11:06:11 +0200 Subject: selftests/bpf: fix sendmsg6_prog on s390 "sendmsg6: rewrite IP & port (C)" fails on s390, because the code in sendmsg_v6_prog() assumes that (ctx->user_ip6[0] & 0xFFFF) refers to leading IPv6 address digits, which is not the case on big-endian machines. Since checking bitwise operations doesn't seem to be the point of the test, replace two short comparisons with a single int comparison. Signed-off-by: Ilya Leoshkevich Acked-by: Andrey Ignatov Signed-off-by: Daniel Borkmann --- tools/testing/selftests/bpf/progs/sendmsg6_prog.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/tools/testing/selftests/bpf/progs/sendmsg6_prog.c b/tools/testing/selftests/bpf/progs/sendmsg6_prog.c index 5aeaa284fc47..a68062820410 100644 --- a/tools/testing/selftests/bpf/progs/sendmsg6_prog.c +++ b/tools/testing/selftests/bpf/progs/sendmsg6_prog.c @@ -41,8 +41,7 @@ int sendmsg_v6_prog(struct bpf_sock_addr *ctx) } /* Rewrite destination. */ - if ((ctx->user_ip6[0] & 0xFFFF) == bpf_htons(0xFACE) && - ctx->user_ip6[0] >> 16 == bpf_htons(0xB00C)) { + if (ctx->user_ip6[0] == bpf_htonl(0xFACEB00C)) { ctx->user_ip6[0] = bpf_htonl(DST_REWRITE_IP6_0); ctx->user_ip6[1] = bpf_htonl(DST_REWRITE_IP6_1); ctx->user_ip6[2] = bpf_htonl(DST_REWRITE_IP6_2); -- cgit From dd422906799f240bfd400a5d376aa43f7b89c38a Mon Sep 17 00:00:00 2001 From: Wei Wang Date: Thu, 18 Jul 2019 17:27:20 +0800 Subject: mm/balloon_compaction: avoid duplicate page removal A #GP is reported in the guest when requesting balloon inflation via virtio-balloon. The reason is that the virtio-balloon driver has removed the page from its internal page list (via balloon_page_pop), but balloon_page_enqueue_one also calls "list_del" to do the removal. This is necessary when it's used from balloon_page_enqueue_list, but not from balloon_page_enqueue. Move list_del to balloon_page_enqueue, and update comments accordingly. Fixes: 418a3ab1e778 (mm/balloon_compaction: List interfaces) Signed-off-by: Wei Wang Signed-off-by: Michael S. Tsirkin --- mm/balloon_compaction.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/mm/balloon_compaction.c b/mm/balloon_compaction.c index 83a7b614061f..d25664e1857b 100644 --- a/mm/balloon_compaction.c +++ b/mm/balloon_compaction.c @@ -21,7 +21,6 @@ static void balloon_page_enqueue_one(struct balloon_dev_info *b_dev_info, * memory corruption is possible and we should stop execution. */ BUG_ON(!trylock_page(page)); - list_del(&page->lru); balloon_page_insert(b_dev_info, page); unlock_page(page); __count_vm_event(BALLOON_INFLATE); @@ -47,6 +46,7 @@ size_t balloon_page_list_enqueue(struct balloon_dev_info *b_dev_info, spin_lock_irqsave(&b_dev_info->pages_lock, flags); list_for_each_entry_safe(page, tmp, pages, lru) { + list_del(&page->lru); balloon_page_enqueue_one(b_dev_info, page); n_pages++; } @@ -128,13 +128,19 @@ struct page *balloon_page_alloc(void) EXPORT_SYMBOL_GPL(balloon_page_alloc); /* - * balloon_page_enqueue - allocates a new page and inserts it into the balloon - * page list. + * balloon_page_enqueue - inserts a new page into the balloon page list. + * * @b_dev_info: balloon device descriptor where we will insert a new page to * @page: new page to enqueue - allocated using balloon_page_alloc. * * Driver must call it to properly enqueue a new allocated balloon page * before definitively removing it from the guest system. + * + * Drivers must not call balloon_page_enqueue on pages that have been + * pushed to a list with balloon_page_push before removing them with + * balloon_page_pop. To all pages on a list, use balloon_page_list_enqueue + * instead. + * * This function returns the page address for the recently enqueued page or * NULL in the case we fail to allocate a new page this turn. */ -- cgit From cfe61801b0f11eb561f1adf452d995efaafbc68b Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 18 Jul 2019 08:19:24 -0400 Subject: balloon: fix up comments Lots of comments bitrotted. Fix them up. Fixes: 418a3ab1e778 (mm/balloon_compaction: List interfaces) Reviewed-by: Wei Wang Signed-off-by: Michael S. Tsirkin Reviewed-by: Ralph Campbell Acked-by: Nadav Amit --- mm/balloon_compaction.c | 67 +++++++++++++++++++++++++++---------------------- 1 file changed, 37 insertions(+), 30 deletions(-) diff --git a/mm/balloon_compaction.c b/mm/balloon_compaction.c index d25664e1857b..798275a51887 100644 --- a/mm/balloon_compaction.c +++ b/mm/balloon_compaction.c @@ -32,8 +32,8 @@ static void balloon_page_enqueue_one(struct balloon_dev_info *b_dev_info, * @b_dev_info: balloon device descriptor where we will insert a new page to * @pages: pages to enqueue - allocated using balloon_page_alloc. * - * Driver must call it to properly enqueue a balloon pages before definitively - * removing it from the guest system. + * Driver must call this function to properly enqueue balloon pages before + * definitively removing them from the guest system. * * Return: number of pages that were enqueued. */ @@ -63,12 +63,13 @@ EXPORT_SYMBOL_GPL(balloon_page_list_enqueue); * @n_req_pages: number of requested pages. * * Driver must call this function to properly de-allocate a previous enlisted - * balloon pages before definetively releasing it back to the guest system. + * balloon pages before definitively releasing it back to the guest system. * This function tries to remove @n_req_pages from the ballooned pages and * return them to the caller in the @pages list. * - * Note that this function may fail to dequeue some pages temporarily empty due - * to compaction isolated pages. + * Note that this function may fail to dequeue some pages even if the balloon + * isn't empty - since the page list can be temporarily empty due to compaction + * of isolated pages. * * Return: number of pages that were added to the @pages list. */ @@ -112,12 +113,13 @@ EXPORT_SYMBOL_GPL(balloon_page_list_dequeue); /* * balloon_page_alloc - allocates a new page for insertion into the balloon - * page list. + * page list. * - * Driver must call it to properly allocate a new enlisted balloon page. - * Driver must call balloon_page_enqueue before definitively removing it from - * the guest system. This function returns the page address for the recently - * allocated page or NULL in the case we fail to allocate a new page this turn. + * Driver must call this function to properly allocate a new balloon page. + * Driver must call balloon_page_enqueue before definitively removing the page + * from the guest system. + * + * Return: struct page for the allocated page or NULL on allocation failure. */ struct page *balloon_page_alloc(void) { @@ -130,19 +132,15 @@ EXPORT_SYMBOL_GPL(balloon_page_alloc); /* * balloon_page_enqueue - inserts a new page into the balloon page list. * - * @b_dev_info: balloon device descriptor where we will insert a new page to + * @b_dev_info: balloon device descriptor where we will insert a new page * @page: new page to enqueue - allocated using balloon_page_alloc. * - * Driver must call it to properly enqueue a new allocated balloon page - * before definitively removing it from the guest system. + * Drivers must call this function to properly enqueue a new allocated balloon + * page before definitively removing the page from the guest system. * - * Drivers must not call balloon_page_enqueue on pages that have been - * pushed to a list with balloon_page_push before removing them with - * balloon_page_pop. To all pages on a list, use balloon_page_list_enqueue - * instead. - * - * This function returns the page address for the recently enqueued page or - * NULL in the case we fail to allocate a new page this turn. + * Drivers must not call balloon_page_enqueue on pages that have been pushed to + * a list with balloon_page_push before removing them with balloon_page_pop. To + * enqueue a list of pages, use balloon_page_list_enqueue instead. */ void balloon_page_enqueue(struct balloon_dev_info *b_dev_info, struct page *page) @@ -157,14 +155,23 @@ EXPORT_SYMBOL_GPL(balloon_page_enqueue); /* * balloon_page_dequeue - removes a page from balloon's page list and returns - * the its address to allow the driver release the page. + * its address to allow the driver to release the page. * @b_dev_info: balloon device decriptor where we will grab a page from. * - * Driver must call it to properly de-allocate a previous enlisted balloon page - * before definetively releasing it back to the guest system. - * This function returns the page address for the recently dequeued page or - * NULL in the case we find balloon's page list temporarily empty due to - * compaction isolated pages. + * Driver must call this function to properly dequeue a previously enqueued page + * before definitively releasing it back to the guest system. + * + * Caller must perform its own accounting to ensure that this + * function is called only if some pages are actually enqueued. + * + * Note that this function may fail to dequeue some pages even if there are + * some enqueued pages - since the page list can be temporarily empty due to + * the compaction of isolated pages. + * + * TODO: remove the caller accounting requirements, and allow caller to wait + * until all pages can be dequeued. + * + * Return: struct page for the dequeued page, or NULL if no page was dequeued. */ struct page *balloon_page_dequeue(struct balloon_dev_info *b_dev_info) { @@ -177,9 +184,9 @@ struct page *balloon_page_dequeue(struct balloon_dev_info *b_dev_info) if (n_pages != 1) { /* * If we are unable to dequeue a balloon page because the page - * list is empty and there is no isolated pages, then something + * list is empty and there are no isolated pages, then something * went out of track and some balloon pages are lost. - * BUG() here, otherwise the balloon driver may get stuck into + * BUG() here, otherwise the balloon driver may get stuck in * an infinite loop while attempting to release all its pages. */ spin_lock_irqsave(&b_dev_info->pages_lock, flags); @@ -230,8 +237,8 @@ int balloon_page_migrate(struct address_space *mapping, /* * We can not easily support the no copy case here so ignore it as it - * is unlikely to be use with ballon pages. See include/linux/hmm.h for - * user of the MIGRATE_SYNC_NO_COPY mode. + * is unlikely to be used with balloon pages. See include/linux/hmm.h + * for a user of the MIGRATE_SYNC_NO_COPY mode. */ if (mode == MIGRATE_SYNC_NO_COPY) return -EINVAL; -- cgit From ae24fb49d01103c80d6ff3b78714259c1c62c958 Mon Sep 17 00:00:00 2001 From: Jean-Philippe Brucker Date: Mon, 22 Jul 2019 15:40:07 +0100 Subject: iommu/virtio: Update to most recent specification Following specification review a few things were changed in v8 of the virtio-iommu series [1], but have been omitted when merging the base driver. Add them now: * Remove the EXEC flag. * Add feature bit for the MMIO flag. * Change domain_bits to domain_range. * Add NOMEM status flag. [1] https://lore.kernel.org/linux-iommu/20190530170929.19366-1-jean-philippe.brucker@arm.com/ Fixes: edcd69ab9a32 ("iommu: Add virtio-iommu driver") Reported-by: Eric Auger Signed-off-by: Jean-Philippe Brucker Signed-off-by: Michael S. Tsirkin Reviewed-by: Eric Auger Tested-by: Eric Auger Acked-by: Joerg Roedel --- drivers/iommu/virtio-iommu.c | 40 ++++++++++++++++++++++++++++----------- include/uapi/linux/virtio_iommu.h | 32 +++++++++++++++++-------------- 2 files changed, 47 insertions(+), 25 deletions(-) diff --git a/drivers/iommu/virtio-iommu.c b/drivers/iommu/virtio-iommu.c index 433f4d2ee956..80a740df0737 100644 --- a/drivers/iommu/virtio-iommu.c +++ b/drivers/iommu/virtio-iommu.c @@ -2,7 +2,7 @@ /* * Virtio driver for the paravirtualized IOMMU * - * Copyright (C) 2018 Arm Limited + * Copyright (C) 2019 Arm Limited */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -47,7 +47,10 @@ struct viommu_dev { /* Device configuration */ struct iommu_domain_geometry geometry; u64 pgsize_bitmap; - u8 domain_bits; + u32 first_domain; + u32 last_domain; + /* Supported MAP flags */ + u32 map_flags; u32 probe_size; }; @@ -62,6 +65,7 @@ struct viommu_domain { struct viommu_dev *viommu; struct mutex mutex; /* protects viommu pointer */ unsigned int id; + u32 map_flags; spinlock_t mappings_lock; struct rb_root_cached mappings; @@ -113,6 +117,8 @@ static int viommu_get_req_errno(void *buf, size_t len) return -ENOENT; case VIRTIO_IOMMU_S_FAULT: return -EFAULT; + case VIRTIO_IOMMU_S_NOMEM: + return -ENOMEM; case VIRTIO_IOMMU_S_IOERR: case VIRTIO_IOMMU_S_DEVERR: default: @@ -607,15 +613,15 @@ static int viommu_domain_finalise(struct viommu_dev *viommu, { int ret; struct viommu_domain *vdomain = to_viommu_domain(domain); - unsigned int max_domain = viommu->domain_bits > 31 ? ~0 : - (1U << viommu->domain_bits) - 1; vdomain->viommu = viommu; + vdomain->map_flags = viommu->map_flags; domain->pgsize_bitmap = viommu->pgsize_bitmap; domain->geometry = viommu->geometry; - ret = ida_alloc_max(&viommu->domain_ids, max_domain, GFP_KERNEL); + ret = ida_alloc_range(&viommu->domain_ids, viommu->first_domain, + viommu->last_domain, GFP_KERNEL); if (ret >= 0) vdomain->id = (unsigned int)ret; @@ -710,7 +716,7 @@ static int viommu_map(struct iommu_domain *domain, unsigned long iova, phys_addr_t paddr, size_t size, int prot) { int ret; - int flags; + u32 flags; struct virtio_iommu_req_map map; struct viommu_domain *vdomain = to_viommu_domain(domain); @@ -718,6 +724,9 @@ static int viommu_map(struct iommu_domain *domain, unsigned long iova, (prot & IOMMU_WRITE ? VIRTIO_IOMMU_MAP_F_WRITE : 0) | (prot & IOMMU_MMIO ? VIRTIO_IOMMU_MAP_F_MMIO : 0); + if (flags & ~vdomain->map_flags) + return -EINVAL; + ret = viommu_add_mapping(vdomain, iova, paddr, size, flags); if (ret) return ret; @@ -1027,7 +1036,8 @@ static int viommu_probe(struct virtio_device *vdev) goto err_free_vqs; } - viommu->domain_bits = 32; + viommu->map_flags = VIRTIO_IOMMU_MAP_F_READ | VIRTIO_IOMMU_MAP_F_WRITE; + viommu->last_domain = ~0U; /* Optional features */ virtio_cread_feature(vdev, VIRTIO_IOMMU_F_INPUT_RANGE, @@ -1038,9 +1048,13 @@ static int viommu_probe(struct virtio_device *vdev) struct virtio_iommu_config, input_range.end, &input_end); - virtio_cread_feature(vdev, VIRTIO_IOMMU_F_DOMAIN_BITS, - struct virtio_iommu_config, domain_bits, - &viommu->domain_bits); + virtio_cread_feature(vdev, VIRTIO_IOMMU_F_DOMAIN_RANGE, + struct virtio_iommu_config, domain_range.start, + &viommu->first_domain); + + virtio_cread_feature(vdev, VIRTIO_IOMMU_F_DOMAIN_RANGE, + struct virtio_iommu_config, domain_range.end, + &viommu->last_domain); virtio_cread_feature(vdev, VIRTIO_IOMMU_F_PROBE, struct virtio_iommu_config, probe_size, @@ -1052,6 +1066,9 @@ static int viommu_probe(struct virtio_device *vdev) .force_aperture = true, }; + if (virtio_has_feature(vdev, VIRTIO_IOMMU_F_MMIO)) + viommu->map_flags |= VIRTIO_IOMMU_MAP_F_MMIO; + viommu_ops.pgsize_bitmap = viommu->pgsize_bitmap; virtio_device_ready(vdev); @@ -1130,9 +1147,10 @@ static void viommu_config_changed(struct virtio_device *vdev) static unsigned int features[] = { VIRTIO_IOMMU_F_MAP_UNMAP, - VIRTIO_IOMMU_F_DOMAIN_BITS, VIRTIO_IOMMU_F_INPUT_RANGE, + VIRTIO_IOMMU_F_DOMAIN_RANGE, VIRTIO_IOMMU_F_PROBE, + VIRTIO_IOMMU_F_MMIO, }; static struct virtio_device_id id_table[] = { diff --git a/include/uapi/linux/virtio_iommu.h b/include/uapi/linux/virtio_iommu.h index ba1b460c9944..237e36a280cb 100644 --- a/include/uapi/linux/virtio_iommu.h +++ b/include/uapi/linux/virtio_iommu.h @@ -1,8 +1,8 @@ /* SPDX-License-Identifier: BSD-3-Clause */ /* - * Virtio-iommu definition v0.9 + * Virtio-iommu definition v0.12 * - * Copyright (C) 2018 Arm Ltd. + * Copyright (C) 2019 Arm Ltd. */ #ifndef _UAPI_LINUX_VIRTIO_IOMMU_H #define _UAPI_LINUX_VIRTIO_IOMMU_H @@ -11,26 +11,31 @@ /* Feature bits */ #define VIRTIO_IOMMU_F_INPUT_RANGE 0 -#define VIRTIO_IOMMU_F_DOMAIN_BITS 1 +#define VIRTIO_IOMMU_F_DOMAIN_RANGE 1 #define VIRTIO_IOMMU_F_MAP_UNMAP 2 #define VIRTIO_IOMMU_F_BYPASS 3 #define VIRTIO_IOMMU_F_PROBE 4 +#define VIRTIO_IOMMU_F_MMIO 5 -struct virtio_iommu_range { - __u64 start; - __u64 end; +struct virtio_iommu_range_64 { + __le64 start; + __le64 end; +}; + +struct virtio_iommu_range_32 { + __le32 start; + __le32 end; }; struct virtio_iommu_config { /* Supported page sizes */ - __u64 page_size_mask; + __le64 page_size_mask; /* Supported IOVA range */ - struct virtio_iommu_range input_range; + struct virtio_iommu_range_64 input_range; /* Max domain ID size */ - __u8 domain_bits; - __u8 padding[3]; + struct virtio_iommu_range_32 domain_range; /* Probe buffer size */ - __u32 probe_size; + __le32 probe_size; }; /* Request types */ @@ -49,6 +54,7 @@ struct virtio_iommu_config { #define VIRTIO_IOMMU_S_RANGE 0x05 #define VIRTIO_IOMMU_S_NOENT 0x06 #define VIRTIO_IOMMU_S_FAULT 0x07 +#define VIRTIO_IOMMU_S_NOMEM 0x08 struct virtio_iommu_req_head { __u8 type; @@ -78,12 +84,10 @@ struct virtio_iommu_req_detach { #define VIRTIO_IOMMU_MAP_F_READ (1 << 0) #define VIRTIO_IOMMU_MAP_F_WRITE (1 << 1) -#define VIRTIO_IOMMU_MAP_F_EXEC (1 << 2) -#define VIRTIO_IOMMU_MAP_F_MMIO (1 << 3) +#define VIRTIO_IOMMU_MAP_F_MMIO (1 << 2) #define VIRTIO_IOMMU_MAP_F_MASK (VIRTIO_IOMMU_MAP_F_READ | \ VIRTIO_IOMMU_MAP_F_WRITE | \ - VIRTIO_IOMMU_MAP_F_EXEC | \ VIRTIO_IOMMU_MAP_F_MMIO) struct virtio_iommu_req_map { -- cgit From 45004d66f2a28d78f543fb2ffbc133e31dc2d162 Mon Sep 17 00:00:00 2001 From: Wenwen Wang Date: Mon, 22 Jul 2019 08:57:44 -0500 Subject: ASoC: dapm: fix a memory leak bug In snd_soc_dapm_new_control_unlocked(), a kernel buffer is allocated in dapm_cnew_widget() to hold the new dapm widget. Then, different actions are taken according to the id of the widget, i.e., 'w->id'. If any failure occurs during this process, snd_soc_dapm_new_control_unlocked() should be terminated by going to the 'request_failed' label. However, the allocated kernel buffer is not freed on this code path, leading to a memory leak bug. To fix the above issue, free the buffer before returning from snd_soc_dapm_new_control_unlocked() through the 'request_failed' label. Signed-off-by: Wenwen Wang Link: https://lore.kernel.org/r/1563803864-2809-1-git-send-email-wang6495@umn.edu Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 9cd87e47ee8f..656cb5cd9cd8 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -3704,6 +3704,8 @@ request_failed: dev_err(dapm->dev, "ASoC: Failed to request %s: %d\n", w->name, ret); + kfree_const(w->sname); + kfree(w); return ERR_PTR(ret); } -- cgit From d5121ffebc38a16b2419b664e466a2f3e5c7b457 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 18 Jul 2019 09:27:10 +0000 Subject: RDMA/siw: Fix error return code in siw_init_module() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface") Link: https://lore.kernel.org/r/20190718092710.85709-1-weiyongjun1@huawei.com Signed-off-by: Wei Yongjun Reviewed-by: Bernard Metzler Reviewed-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe --- drivers/infiniband/sw/siw/siw_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/sw/siw/siw_main.c b/drivers/infiniband/sw/siw/siw_main.c index f55c4e80aea4..d0f140daf659 100644 --- a/drivers/infiniband/sw/siw/siw_main.c +++ b/drivers/infiniband/sw/siw/siw_main.c @@ -612,6 +612,7 @@ static __init int siw_init_module(void) if (!siw_create_tx_threads()) { pr_info("siw: Could not start any TX thread\n"); + rv = -ENOMEM; goto out_error; } /* -- cgit From 60c3becfd1a138fdcfe48f2a5ef41ef0078d481e Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Thu, 11 Jul 2019 09:32:17 +0800 Subject: RDMA/hns: Fix sg offset non-zero issue When run perftest in many times, the system will report a BUG as follows: BUG: Bad rss-counter state mm:(____ptrval____) idx:0 val:-1 BUG: Bad rss-counter state mm:(____ptrval____) idx:1 val:1 We tested with different kernel version and found it started from the the following commit: commit d10bcf947a3e ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs") In this commit, the sg->offset is always 0 when sg_set_page() is called in ib_umem_get() and the drivers are not allowed to change the sgl, otherwise it will get bad page descriptor when unfolding SGEs in __ib_umem_release() as sg_page_count() will get wrong result while sgl->offset is not 0. However, there is a weird sgl usage in the current hns driver, the driver modified sg->offset after calling ib_umem_get(), which caused we iterate past the wrong number of pages in for_each_sg_page iterator. This patch fixes it by correcting the non-standard sgl usage found in the hns_roce_db_map_user() function. Fixes: d10bcf947a3e ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs") Fixes: 0425e3e6e0c7 ("RDMA/hns: Support flush cqe for hip08 in kernel space") Link: https://lore.kernel.org/r/1562808737-45723-1-git-send-email-oulijun@huawei.com Signed-off-by: Xi Wang Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hns/hns_roce_db.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_db.c b/drivers/infiniband/hw/hns/hns_roce_db.c index 627aa46ef683..c00714c2f16a 100644 --- a/drivers/infiniband/hw/hns/hns_roce_db.c +++ b/drivers/infiniband/hw/hns/hns_roce_db.c @@ -12,13 +12,15 @@ int hns_roce_db_map_user(struct hns_roce_ucontext *context, struct ib_udata *udata, unsigned long virt, struct hns_roce_db *db) { + unsigned long page_addr = virt & PAGE_MASK; struct hns_roce_user_db_page *page; + unsigned int offset; int ret = 0; mutex_lock(&context->page_mutex); list_for_each_entry(page, &context->page_list, list) - if (page->user_virt == (virt & PAGE_MASK)) + if (page->user_virt == page_addr) goto found; page = kmalloc(sizeof(*page), GFP_KERNEL); @@ -28,8 +30,8 @@ int hns_roce_db_map_user(struct hns_roce_ucontext *context, } refcount_set(&page->refcount, 1); - page->user_virt = (virt & PAGE_MASK); - page->umem = ib_umem_get(udata, virt & PAGE_MASK, PAGE_SIZE, 0, 0); + page->user_virt = page_addr; + page->umem = ib_umem_get(udata, page_addr, PAGE_SIZE, 0, 0); if (IS_ERR(page->umem)) { ret = PTR_ERR(page->umem); kfree(page); @@ -39,10 +41,9 @@ int hns_roce_db_map_user(struct hns_roce_ucontext *context, list_add(&page->list, &context->page_list); found: - db->dma = sg_dma_address(page->umem->sg_head.sgl) + - (virt & ~PAGE_MASK); - page->umem->sg_head.sgl->offset = virt & ~PAGE_MASK; - db->virt_addr = sg_virt(page->umem->sg_head.sgl); + offset = virt - page_addr; + db->dma = sg_dma_address(page->umem->sg_head.sgl) + offset; + db->virt_addr = sg_virt(page->umem->sg_head.sgl) + offset; db->u.user_page = page; refcount_inc(&page->refcount); -- cgit From cd48a82087231fdba0e77521102386c6ed0168d6 Mon Sep 17 00:00:00 2001 From: John Fleck Date: Mon, 15 Jul 2019 12:45:21 -0400 Subject: IB/hfi1: Check for error on call to alloc_rsm_map_table The call to alloc_rsm_map_table does not check if the kmalloc fails. Check for a NULL on alloc, and bail if it fails. Fixes: 372cc85a13c9 ("IB/hfi1: Extract RSM map table init from QOS") Link: https://lore.kernel.org/r/20190715164521.74174.27047.stgit@awfm-01.aw.intel.com Cc: Reviewed-by: Mike Marciniszyn Signed-off-by: John Fleck Signed-off-by: Mike Marciniszyn Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/chip.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index d5b643a1d9fd..67052dc3100c 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -14452,7 +14452,7 @@ void hfi1_deinit_vnic_rsm(struct hfi1_devdata *dd) clear_rcvctrl(dd, RCV_CTRL_RCV_RSM_ENABLE_SMASK); } -static void init_rxe(struct hfi1_devdata *dd) +static int init_rxe(struct hfi1_devdata *dd) { struct rsm_map_table *rmt; u64 val; @@ -14461,6 +14461,9 @@ static void init_rxe(struct hfi1_devdata *dd) write_csr(dd, RCV_ERR_MASK, ~0ull); rmt = alloc_rsm_map_table(dd); + if (!rmt) + return -ENOMEM; + /* set up QOS, including the QPN map table */ init_qos(dd, rmt); init_fecn_handling(dd, rmt); @@ -14487,6 +14490,7 @@ static void init_rxe(struct hfi1_devdata *dd) val |= ((4ull & RCV_BYPASS_HDR_SIZE_MASK) << RCV_BYPASS_HDR_SIZE_SHIFT); write_csr(dd, RCV_BYPASS, val); + return 0; } static void init_other(struct hfi1_devdata *dd) @@ -15024,7 +15028,10 @@ int hfi1_init_dd(struct hfi1_devdata *dd) goto bail_cleanup; /* set initial RXE CSRs */ - init_rxe(dd); + ret = init_rxe(dd); + if (ret) + goto bail_cleanup; + /* set initial TXE CSRs */ init_txe(dd); /* set initial non-RXE, non-TXE CSRs */ -- cgit From 2b74c878b0eae4c32629c2d5ba69a29f69048313 Mon Sep 17 00:00:00 2001 From: Kaike Wan Date: Mon, 15 Jul 2019 12:45:28 -0400 Subject: IB/hfi1: Unreserve a flushed OPFN request When an OPFN request is flushed, the request is completed without unreserving itself from the send queue. Subsequently, when a new request is post sent, the following warning will be triggered: WARNING: CPU: 4 PID: 8130 at rdmavt/qp.c:1761 rvt_post_send+0x72a/0x880 [rdmavt] Call Trace: [] dump_stack+0x19/0x1b [] __warn+0xd8/0x100 [] warn_slowpath_null+0x1d/0x20 [] rvt_post_send+0x72a/0x880 [rdmavt] [] ? account_entity_dequeue+0xae/0xd0 [] ? __kmalloc+0x55/0x230 [] ib_uverbs_post_send+0x37c/0x5d0 [ib_uverbs] [] ? rdma_lookup_put_uobject+0x26/0x60 [ib_uverbs] [] ib_uverbs_write+0x286/0x460 [ib_uverbs] [] ? security_file_permission+0x27/0xa0 [] vfs_write+0xc0/0x1f0 [] SyS_write+0x7f/0xf0 [] system_call_fastpath+0x22/0x27 This patch fixes the problem by moving rvt_qp_wqe_unreserve() into rvt_qp_complete_swqe() to simplify the code and make it less error-prone. Fixes: ca95f802ef51 ("IB/hfi1: Unreserve a reserved request when it is completed") Link: https://lore.kernel.org/r/20190715164528.74174.31364.stgit@awfm-01.aw.intel.com Cc: Reviewed-by: Mike Marciniszyn Reviewed-by: Dennis Dalessandro Signed-off-by: Kaike Wan Signed-off-by: Mike Marciniszyn Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/rc.c | 2 -- include/rdma/rdmavt_qp.h | 9 ++++----- 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/rc.c b/drivers/infiniband/hw/hfi1/rc.c index 0477c14633ab..024a7c2b6124 100644 --- a/drivers/infiniband/hw/hfi1/rc.c +++ b/drivers/infiniband/hw/hfi1/rc.c @@ -1835,7 +1835,6 @@ void hfi1_rc_send_complete(struct rvt_qp *qp, struct hfi1_opa_header *opah) cmp_psn(qp->s_sending_psn, qp->s_sending_hpsn) <= 0) break; trdma_clean_swqe(qp, wqe); - rvt_qp_wqe_unreserve(qp, wqe); trace_hfi1_qp_send_completion(qp, wqe, qp->s_last); rvt_qp_complete_swqe(qp, wqe, @@ -1882,7 +1881,6 @@ struct rvt_swqe *do_rc_completion(struct rvt_qp *qp, if (cmp_psn(wqe->lpsn, qp->s_sending_psn) < 0 || cmp_psn(qp->s_sending_psn, qp->s_sending_hpsn) > 0) { trdma_clean_swqe(qp, wqe); - rvt_qp_wqe_unreserve(qp, wqe); trace_hfi1_qp_send_completion(qp, wqe, qp->s_last); rvt_qp_complete_swqe(qp, wqe, diff --git a/include/rdma/rdmavt_qp.h b/include/rdma/rdmavt_qp.h index 0eeea520a853..e06c77d76463 100644 --- a/include/rdma/rdmavt_qp.h +++ b/include/rdma/rdmavt_qp.h @@ -608,7 +608,7 @@ static inline void rvt_qp_wqe_reserve( /** * rvt_qp_wqe_unreserve - clean reserved operation * @qp - the rvt qp - * @wqe - the send wqe + * @flags - send wqe flags * * This decrements the reserve use count. * @@ -620,11 +620,9 @@ static inline void rvt_qp_wqe_reserve( * the compiler does not juggle the order of the s_last * ring index and the decrementing of s_reserved_used. */ -static inline void rvt_qp_wqe_unreserve( - struct rvt_qp *qp, - struct rvt_swqe *wqe) +static inline void rvt_qp_wqe_unreserve(struct rvt_qp *qp, int flags) { - if (unlikely(wqe->wr.send_flags & RVT_SEND_RESERVE_USED)) { + if (unlikely(flags & RVT_SEND_RESERVE_USED)) { atomic_dec(&qp->s_reserved_used); /* insure no compiler re-order up to s_last change */ smp_mb__after_atomic(); @@ -853,6 +851,7 @@ rvt_qp_complete_swqe(struct rvt_qp *qp, u32 byte_len, last; int flags = wqe->wr.send_flags; + rvt_qp_wqe_unreserve(qp, flags); rvt_put_qp_swqe(qp, wqe); need_completion = -- cgit From dc25b239ebeaa3c58e5ceaa732140427d386aa16 Mon Sep 17 00:00:00 2001 From: Kaike Wan Date: Mon, 15 Jul 2019 12:45:34 -0400 Subject: IB/hfi1: Field not zero-ed when allocating TID flow memory The field flow->resync_npkts is added for TID RDMA WRITE request and zero-ed when a TID RDMA WRITE RESP packet is received by the requester. This field is used to rewind a request during retry in the function hfi1_tid_rdma_restart_req() shared by both TID RDMA WRITE and TID RDMA READ requests. Therefore, when a TID RDMA READ request is retried, this field may not be initialized at all, which causes the retry to start at an incorrect psn, leading to the drop of the retry request by the responder. This patch fixes the problem by zeroing out the field when the flow memory is allocated. Fixes: 838b6fd2d9ca ("IB/hfi1: TID RDMA RcvArray programming and TID allocation") Cc: Link: https://lore.kernel.org/r/20190715164534.74174.6177.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn Signed-off-by: Kaike Wan Signed-off-by: Mike Marciniszyn Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/tid_rdma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/hw/hfi1/tid_rdma.c b/drivers/infiniband/hw/hfi1/tid_rdma.c index 92acccaaaa86..7fcbeee84293 100644 --- a/drivers/infiniband/hw/hfi1/tid_rdma.c +++ b/drivers/infiniband/hw/hfi1/tid_rdma.c @@ -1620,6 +1620,7 @@ static int hfi1_kern_exp_rcv_alloc_flows(struct tid_rdma_request *req, flows[i].req = req; flows[i].npagesets = 0; flows[i].pagesets[0].mapped = 0; + flows[i].resync_npkts = 0; } req->flows = flows; return 0; -- cgit From f4d46119f214f9a7620b0d18b153d7e0e8c90b4f Mon Sep 17 00:00:00 2001 From: Kaike Wan Date: Mon, 15 Jul 2019 12:45:40 -0400 Subject: IB/hfi1: Drop all TID RDMA READ RESP packets after r_next_psn When a TID sequence error occurs while receiving TID RDMA READ RESP packets, all packets after flow->flow_state.r_next_psn should be dropped, including those response packets for subsequent segments. The current implementation will drop the subsequent response packets for the segment to complete next, but may accept packets for subsequent segments and therefore mistakenly advance the r_next_psn fields for the corresponding software flows. This may result in failures to complete subsequent segments after the current segment is completed. The fix is to only use the flow pointed by req->clear_tail for checking KDETH PSN instead of finding a flow from the request's flow array. Fixes: b885d5be9ca1 ("IB/hfi1: Unify the software PSN check for TID RDMA READ/WRITE") Cc: Link: https://lore.kernel.org/r/20190715164540.74174.54702.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn Signed-off-by: Kaike Wan Signed-off-by: Mike Marciniszyn Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/hfi1/tid_rdma.c | 42 +---------------------------------- 1 file changed, 1 insertion(+), 41 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/tid_rdma.c b/drivers/infiniband/hw/hfi1/tid_rdma.c index 7fcbeee84293..996fc298207e 100644 --- a/drivers/infiniband/hw/hfi1/tid_rdma.c +++ b/drivers/infiniband/hw/hfi1/tid_rdma.c @@ -1674,34 +1674,6 @@ static struct tid_rdma_flow *find_flow_ib(struct tid_rdma_request *req, return NULL; } -static struct tid_rdma_flow * -__find_flow_ranged(struct tid_rdma_request *req, u16 head, u16 tail, - u32 psn, u16 *fidx) -{ - for ( ; CIRC_CNT(head, tail, MAX_FLOWS); - tail = CIRC_NEXT(tail, MAX_FLOWS)) { - struct tid_rdma_flow *flow = &req->flows[tail]; - u32 spsn, lpsn; - - spsn = full_flow_psn(flow, flow->flow_state.spsn); - lpsn = full_flow_psn(flow, flow->flow_state.lpsn); - - if (cmp_psn(psn, spsn) >= 0 && cmp_psn(psn, lpsn) <= 0) { - if (fidx) - *fidx = tail; - return flow; - } - } - return NULL; -} - -static struct tid_rdma_flow *find_flow(struct tid_rdma_request *req, - u32 psn, u16 *fidx) -{ - return __find_flow_ranged(req, req->setup_head, req->clear_tail, psn, - fidx); -} - /* TID RDMA READ functions */ u32 hfi1_build_tid_rdma_read_packet(struct rvt_swqe *wqe, struct ib_other_headers *ohdr, u32 *bth1, @@ -2789,19 +2761,7 @@ static bool handle_read_kdeth_eflags(struct hfi1_ctxtdata *rcd, * to prevent continuous Flow Sequence errors for any * packets that could be still in the fabric. */ - flow = find_flow(req, psn, NULL); - if (!flow) { - /* - * We can't find the IB PSN matching the - * received KDETH PSN. The only thing we can - * do at this point is report the error to - * the QP. - */ - hfi1_kern_read_tid_flow_free(qp); - spin_unlock(&qp->s_lock); - rvt_rc_error(qp, IB_WC_LOC_QP_OP_ERR); - return ret; - } + flow = &req->flows[req->clear_tail]; if (priv->s_flags & HFI1_R_TID_SW_PSN) { diff = cmp_psn(psn, flow->flow_state.r_next_psn); -- cgit From c56b593d2af4cbd189c6af5fd6790728fade80cc Mon Sep 17 00:00:00 2001 From: Selvin Xavier Date: Mon, 15 Jul 2019 05:19:13 -0400 Subject: RDMA/bnxt_re: Honor vlan_id in GID entry comparison A GID entry consists of GID, vlan, netdev and smac. Extend GID duplicate check comparisons to consider vlan_id as well to support IPv6 VLAN based link local addresses. Introduce a new structure (bnxt_qplib_gid_info) to hold gid and vlan_id information. The issue is discussed in the following thread https://lore.kernel.org/r/AM0PR05MB4866CFEDCDF3CDA1D7D18AA5D1F20@AM0PR05MB4866.eurprd05.prod.outlook.com Fixes: 823b23da7113 ("IB/core: Allow vlan link local address based RoCE GIDs") Cc: # v5.2+ Link: https://lore.kernel.org/r/20190715091913.15726-1-selvin.xavier@broadcom.com Reported-by: Yi Zhang Co-developed-by: Parav Pandit Signed-off-by: Parav Pandit Signed-off-by: Selvin Xavier Tested-by: Yi Zhang Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/bnxt_re/ib_verbs.c | 7 +++++-- drivers/infiniband/hw/bnxt_re/qplib_res.c | 13 +++++++++---- drivers/infiniband/hw/bnxt_re/qplib_res.h | 2 +- drivers/infiniband/hw/bnxt_re/qplib_sp.c | 14 +++++++++----- drivers/infiniband/hw/bnxt_re/qplib_sp.h | 7 ++++++- 5 files changed, 30 insertions(+), 13 deletions(-) diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c index a91653aabf38..098ab883733e 100644 --- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c +++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c @@ -308,6 +308,7 @@ int bnxt_re_del_gid(const struct ib_gid_attr *attr, void **context) struct bnxt_re_dev *rdev = to_bnxt_re_dev(attr->device, ibdev); struct bnxt_qplib_sgid_tbl *sgid_tbl = &rdev->qplib_res.sgid_tbl; struct bnxt_qplib_gid *gid_to_del; + u16 vlan_id = 0xFFFF; /* Delete the entry from the hardware */ ctx = *context; @@ -317,7 +318,8 @@ int bnxt_re_del_gid(const struct ib_gid_attr *attr, void **context) if (sgid_tbl && sgid_tbl->active) { if (ctx->idx >= sgid_tbl->max) return -EINVAL; - gid_to_del = &sgid_tbl->tbl[ctx->idx]; + gid_to_del = &sgid_tbl->tbl[ctx->idx].gid; + vlan_id = sgid_tbl->tbl[ctx->idx].vlan_id; /* DEL_GID is called in WQ context(netdevice_event_work_handler) * or via the ib_unregister_device path. In the former case QP1 * may not be destroyed yet, in which case just return as FW @@ -335,7 +337,8 @@ int bnxt_re_del_gid(const struct ib_gid_attr *attr, void **context) } ctx->refcnt--; if (!ctx->refcnt) { - rc = bnxt_qplib_del_sgid(sgid_tbl, gid_to_del, true); + rc = bnxt_qplib_del_sgid(sgid_tbl, gid_to_del, + vlan_id, true); if (rc) { dev_err(rdev_to_dev(rdev), "Failed to remove GID: %#x", rc); diff --git a/drivers/infiniband/hw/bnxt_re/qplib_res.c b/drivers/infiniband/hw/bnxt_re/qplib_res.c index 37928b1111df..bdbde8e22420 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_res.c +++ b/drivers/infiniband/hw/bnxt_re/qplib_res.c @@ -488,7 +488,7 @@ static int bnxt_qplib_alloc_sgid_tbl(struct bnxt_qplib_res *res, struct bnxt_qplib_sgid_tbl *sgid_tbl, u16 max) { - sgid_tbl->tbl = kcalloc(max, sizeof(struct bnxt_qplib_gid), GFP_KERNEL); + sgid_tbl->tbl = kcalloc(max, sizeof(*sgid_tbl->tbl), GFP_KERNEL); if (!sgid_tbl->tbl) return -ENOMEM; @@ -526,9 +526,10 @@ static void bnxt_qplib_cleanup_sgid_tbl(struct bnxt_qplib_res *res, for (i = 0; i < sgid_tbl->max; i++) { if (memcmp(&sgid_tbl->tbl[i], &bnxt_qplib_gid_zero, sizeof(bnxt_qplib_gid_zero))) - bnxt_qplib_del_sgid(sgid_tbl, &sgid_tbl->tbl[i], true); + bnxt_qplib_del_sgid(sgid_tbl, &sgid_tbl->tbl[i].gid, + sgid_tbl->tbl[i].vlan_id, true); } - memset(sgid_tbl->tbl, 0, sizeof(struct bnxt_qplib_gid) * sgid_tbl->max); + memset(sgid_tbl->tbl, 0, sizeof(*sgid_tbl->tbl) * sgid_tbl->max); memset(sgid_tbl->hw_id, -1, sizeof(u16) * sgid_tbl->max); memset(sgid_tbl->vlan, 0, sizeof(u8) * sgid_tbl->max); sgid_tbl->active = 0; @@ -537,7 +538,11 @@ static void bnxt_qplib_cleanup_sgid_tbl(struct bnxt_qplib_res *res, static void bnxt_qplib_init_sgid_tbl(struct bnxt_qplib_sgid_tbl *sgid_tbl, struct net_device *netdev) { - memset(sgid_tbl->tbl, 0, sizeof(struct bnxt_qplib_gid) * sgid_tbl->max); + u32 i; + + for (i = 0; i < sgid_tbl->max; i++) + sgid_tbl->tbl[i].vlan_id = 0xffff; + memset(sgid_tbl->hw_id, -1, sizeof(u16) * sgid_tbl->max); } diff --git a/drivers/infiniband/hw/bnxt_re/qplib_res.h b/drivers/infiniband/hw/bnxt_re/qplib_res.h index 30c42c92fac7..fbda11a7ab1a 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_res.h +++ b/drivers/infiniband/hw/bnxt_re/qplib_res.h @@ -111,7 +111,7 @@ struct bnxt_qplib_pd_tbl { }; struct bnxt_qplib_sgid_tbl { - struct bnxt_qplib_gid *tbl; + struct bnxt_qplib_gid_info *tbl; u16 *hw_id; u16 max; u16 active; diff --git a/drivers/infiniband/hw/bnxt_re/qplib_sp.c b/drivers/infiniband/hw/bnxt_re/qplib_sp.c index 48793d3512ac..40296b97d21e 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_sp.c +++ b/drivers/infiniband/hw/bnxt_re/qplib_sp.c @@ -213,12 +213,12 @@ int bnxt_qplib_get_sgid(struct bnxt_qplib_res *res, index, sgid_tbl->max); return -EINVAL; } - memcpy(gid, &sgid_tbl->tbl[index], sizeof(*gid)); + memcpy(gid, &sgid_tbl->tbl[index].gid, sizeof(*gid)); return 0; } int bnxt_qplib_del_sgid(struct bnxt_qplib_sgid_tbl *sgid_tbl, - struct bnxt_qplib_gid *gid, bool update) + struct bnxt_qplib_gid *gid, u16 vlan_id, bool update) { struct bnxt_qplib_res *res = to_bnxt_qplib(sgid_tbl, struct bnxt_qplib_res, @@ -236,7 +236,8 @@ int bnxt_qplib_del_sgid(struct bnxt_qplib_sgid_tbl *sgid_tbl, return -ENOMEM; } for (index = 0; index < sgid_tbl->max; index++) { - if (!memcmp(&sgid_tbl->tbl[index], gid, sizeof(*gid))) + if (!memcmp(&sgid_tbl->tbl[index].gid, gid, sizeof(*gid)) && + vlan_id == sgid_tbl->tbl[index].vlan_id) break; } if (index == sgid_tbl->max) { @@ -262,8 +263,9 @@ int bnxt_qplib_del_sgid(struct bnxt_qplib_sgid_tbl *sgid_tbl, if (rc) return rc; } - memcpy(&sgid_tbl->tbl[index], &bnxt_qplib_gid_zero, + memcpy(&sgid_tbl->tbl[index].gid, &bnxt_qplib_gid_zero, sizeof(bnxt_qplib_gid_zero)); + sgid_tbl->tbl[index].vlan_id = 0xFFFF; sgid_tbl->vlan[index] = 0; sgid_tbl->active--; dev_dbg(&res->pdev->dev, @@ -296,7 +298,8 @@ int bnxt_qplib_add_sgid(struct bnxt_qplib_sgid_tbl *sgid_tbl, } free_idx = sgid_tbl->max; for (i = 0; i < sgid_tbl->max; i++) { - if (!memcmp(&sgid_tbl->tbl[i], gid, sizeof(*gid))) { + if (!memcmp(&sgid_tbl->tbl[i], gid, sizeof(*gid)) && + sgid_tbl->tbl[i].vlan_id == vlan_id) { dev_dbg(&res->pdev->dev, "SGID entry already exist in entry %d!\n", i); *index = i; @@ -351,6 +354,7 @@ int bnxt_qplib_add_sgid(struct bnxt_qplib_sgid_tbl *sgid_tbl, } /* Add GID to the sgid_tbl */ memcpy(&sgid_tbl->tbl[free_idx], gid, sizeof(*gid)); + sgid_tbl->tbl[free_idx].vlan_id = vlan_id; sgid_tbl->active++; if (vlan_id != 0xFFFF) sgid_tbl->vlan[free_idx] = 1; diff --git a/drivers/infiniband/hw/bnxt_re/qplib_sp.h b/drivers/infiniband/hw/bnxt_re/qplib_sp.h index 0ec3b12b0bcd..13d9432d5ce2 100644 --- a/drivers/infiniband/hw/bnxt_re/qplib_sp.h +++ b/drivers/infiniband/hw/bnxt_re/qplib_sp.h @@ -84,6 +84,11 @@ struct bnxt_qplib_gid { u8 data[16]; }; +struct bnxt_qplib_gid_info { + struct bnxt_qplib_gid gid; + u16 vlan_id; +}; + struct bnxt_qplib_ah { struct bnxt_qplib_gid dgid; struct bnxt_qplib_pd *pd; @@ -221,7 +226,7 @@ int bnxt_qplib_get_sgid(struct bnxt_qplib_res *res, struct bnxt_qplib_sgid_tbl *sgid_tbl, int index, struct bnxt_qplib_gid *gid); int bnxt_qplib_del_sgid(struct bnxt_qplib_sgid_tbl *sgid_tbl, - struct bnxt_qplib_gid *gid, bool update); + struct bnxt_qplib_gid *gid, u16 vlan_id, bool update); int bnxt_qplib_add_sgid(struct bnxt_qplib_sgid_tbl *sgid_tbl, struct bnxt_qplib_gid *gid, u8 *mac, u16 vlan_id, bool update, u32 *index); -- cgit From b7f406bb883ba7ac3222298f6b44cebc4cfe2dde Mon Sep 17 00:00:00 2001 From: Chuhong Yuan Date: Wed, 17 Jul 2019 16:21:01 +0800 Subject: IB/mlx5: Replace kfree with kvfree Memory allocated by kvzalloc should not be freed by kfree(), use kvfree() instead. Fixes: 813e90b1aeaa ("IB/mlx5: Add advise_mr() support") Link: https://lore.kernel.org/r/20190717082101.14196-1-hslester96@gmail.com Signed-off-by: Chuhong Yuan Reviewed-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/odp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/odp.c b/drivers/infiniband/hw/mlx5/odp.c index 5b642d81e617..36ba901cc9a5 100644 --- a/drivers/infiniband/hw/mlx5/odp.c +++ b/drivers/infiniband/hw/mlx5/odp.c @@ -1771,7 +1771,7 @@ static void mlx5_ib_prefetch_mr_work(struct work_struct *work) num_pending_prefetch_dec(to_mdev(w->pd->device), w->sg_list, w->num_sge, 0); - kfree(w); + kvfree(w); } int mlx5_ib_advise_mr_prefetch(struct ib_pd *pd, @@ -1813,7 +1813,7 @@ int mlx5_ib_advise_mr_prefetch(struct ib_pd *pd, if (valid_req) queue_work(system_unbound_wq, &work->work); else - kfree(work); + kvfree(work); srcu_read_unlock(&dev->mr_srcu, srcu_key); -- cgit From af0653d56657340a80622aeb96707f7fc8506225 Mon Sep 17 00:00:00 2001 From: Mao Wenan Date: Fri, 19 Jul 2019 09:29:38 +0800 Subject: RDMA/siw: Remove set but not used variables 'rv' Fixes gcc '-Wunused-but-set-variable' warning: drivers/infiniband/sw/siw/siw_cm.c: In function siw_cep_set_inuse: drivers/infiniband/sw/siw/siw_cm.c:223:6: warning: variable rv set but not used [-Wunused-but-set-variable] Fixes: 6c52fdc244b5 ("rdma/siw: connection management") Link: https://lore.kernel.org/r/20190719012938.100628-1-maowenan@huawei.com Signed-off-by: Mao Wenan Reviewed-by: Bernard Metzler Signed-off-by: Jason Gunthorpe --- drivers/infiniband/sw/siw/siw_cm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/infiniband/sw/siw/siw_cm.c b/drivers/infiniband/sw/siw/siw_cm.c index a7cde98e73e8..9ce8a1b925d2 100644 --- a/drivers/infiniband/sw/siw/siw_cm.c +++ b/drivers/infiniband/sw/siw/siw_cm.c @@ -220,13 +220,12 @@ static void siw_put_work(struct siw_cm_work *work) static void siw_cep_set_inuse(struct siw_cep *cep) { unsigned long flags; - int rv; retry: spin_lock_irqsave(&cep->lock, flags); if (cep->in_use) { spin_unlock_irqrestore(&cep->lock, flags); - rv = wait_event_interruptible(cep->waitq, !cep->in_use); + wait_event_interruptible(cep->waitq, !cep->in_use); if (signal_pending(current)) flush_signals(current); goto retry; -- cgit From 12185dfe44360f814ac4ead9d22ad2af7511b2e9 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Tue, 16 Jul 2019 17:25:10 -0500 Subject: bonding: Force slave speed check after link state recovery for 802.3ad The following scenario was encountered during testing of logical partition mobility on pseries partitions with bonded ibmvnic adapters in LACP mode. 1. Driver receives a signal that the device has been swapped, and it needs to reset to initialize the new device. 2. Driver reports loss of carrier and begins initialization. 3. Bonding driver receives NETDEV_CHANGE notifier and checks the slave's current speed and duplex settings. Because these are unknown at the time, the bond sets its link state to BOND_LINK_FAIL and handles the speed update, clearing AD_PORT_LACP_ENABLE. 4. Driver finishes recovery and reports that the carrier is on. 5. Bond receives a new notification and checks the speed again. The speeds are valid but miimon has not altered the link state yet. AD_PORT_LACP_ENABLE remains off. Because the slave's link state is still BOND_LINK_FAIL, no further port checks are made when it recovers. Though the slave devices are operational and have valid speed and duplex settings, the bond will not send LACPDU's. The simplest fix I can see is to force another speed check in bond_miimon_commit. This way the bond will update AD_PORT_LACP_ENABLE if needed when transitioning from BOND_LINK_FAIL to BOND_LINK_UP. CC: Jarod Wilson CC: Jay Vosburgh CC: Veaceslav Falico CC: Andy Gospodarek Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 9b7016abca2f..02fd7822c14a 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2196,6 +2196,15 @@ static void bond_miimon_commit(struct bonding *bond) bond_for_each_slave(bond, slave, iter) { switch (slave->new_link) { case BOND_LINK_NOCHANGE: + /* For 802.3ad mode, check current slave speed and + * duplex again in case its port was disabled after + * invalid speed/duplex reporting but recovered before + * link monitoring could make a decision on the actual + * link status + */ + if (BOND_MODE(bond) == BOND_MODE_8023AD && + slave->link == BOND_LINK_UP) + bond_3ad_adapter_speed_duplex_changed(slave); continue; case BOND_LINK_UP: -- cgit From 1573eebeaa8055777eb753f9b4d1cbe653380c38 Mon Sep 17 00:00:00 2001 From: Codrin Ciubotariu Date: Tue, 25 Jun 2019 12:10:02 +0300 Subject: clk: at91: generated: Truncate divisor to GENERATED_MAX_DIV + 1 In clk_generated_determine_rate(), if the divisor is greater than GENERATED_MAX_DIV + 1, then the wrong best_rate will be returned. If clk_generated_set_rate() will be called later with this wrong rate, it will return -EINVAL, so the generated clock won't change its value. Do no let the divisor be greater than GENERATED_MAX_DIV + 1. Fixes: 8c7aa6328947 ("clk: at91: clk-generated: remove useless divisor loop") Signed-off-by: Codrin Ciubotariu Acked-by: Nicolas Ferre Acked-by: Ludovic Desroches Signed-off-by: Stephen Boyd --- drivers/clk/at91/clk-generated.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c index 44db83a6d01c..44a46dcc0518 100644 --- a/drivers/clk/at91/clk-generated.c +++ b/drivers/clk/at91/clk-generated.c @@ -141,6 +141,8 @@ static int clk_generated_determine_rate(struct clk_hw *hw, continue; div = DIV_ROUND_CLOSEST(parent_rate, req->rate); + if (div > GENERATED_MAX_DIV + 1) + div = GENERATED_MAX_DIV + 1; clk_generated_best_diff(req, parent, parent_rate, div, &best_diff, &best_rate); -- cgit From 6ee82ef04e38b0d8b09b04bc1b068673deed6582 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Mon, 1 Jul 2019 13:46:51 +0200 Subject: clk: Add missing documentation of devm_clk_bulk_get_optional() argument Fix an incomplete devm_clk_bulk_get_optional() function documentation by adding description of the num_clks argument as in other *clk_bulk* functions. Fixes: 9bd5ef0bd874 ("clk: Add devm_clk_bulk_get_optional() function") Reported-by: kbuild test robot Signed-off-by: Sylwester Nawrocki Signed-off-by: Stephen Boyd --- include/linux/clk.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/clk.h b/include/linux/clk.h index 3c096c7a51dc..853a8f181394 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -359,6 +359,7 @@ int __must_check devm_clk_bulk_get(struct device *dev, int num_clks, /** * devm_clk_bulk_get_optional - managed get multiple optional consumer clocks * @dev: device for clock "consumer" + * @num_clks: the number of clk_bulk_data * @clks: pointer to the clk_bulk_data table of consumer * * Behaves the same as devm_clk_bulk_get() except where there is no clock -- cgit From c93d059a80450af99dd6c0e8c36790579343675a Mon Sep 17 00:00:00 2001 From: Weiyi Lu Date: Fri, 28 Jun 2019 15:22:34 +0800 Subject: clk: mediatek: mt8183: Register 13MHz clock earlier for clocksource The 13MHz clock should be registered before clocksource driver is initialized. Use CLK_OF_DECLARE_DRIVER() to guarantee. Fixes: acddfc2c261b ("clk: mediatek: Add MT8183 clock support") Cc: Signed-off-by: Weiyi Lu Signed-off-by: Stephen Boyd --- drivers/clk/mediatek/clk-mt8183.c | 46 +++++++++++++++++++++++++++++---------- 1 file changed, 34 insertions(+), 12 deletions(-) diff --git a/drivers/clk/mediatek/clk-mt8183.c b/drivers/clk/mediatek/clk-mt8183.c index 1aa5f4059251..73b7e238eee7 100644 --- a/drivers/clk/mediatek/clk-mt8183.c +++ b/drivers/clk/mediatek/clk-mt8183.c @@ -25,9 +25,11 @@ static const struct mtk_fixed_clk top_fixed_clks[] = { FIXED_CLK(CLK_TOP_UNIVP_192M, "univpll_192m", "univpll", 192000000), }; +static const struct mtk_fixed_factor top_early_divs[] = { + FACTOR(CLK_TOP_CLK13M, "clk13m", "clk26m", 1, 2), +}; + static const struct mtk_fixed_factor top_divs[] = { - FACTOR(CLK_TOP_CLK13M, "clk13m", "clk26m", 1, - 2), FACTOR(CLK_TOP_F26M_CK_D2, "csw_f26m_ck_d2", "clk26m", 1, 2), FACTOR(CLK_TOP_SYSPLL_CK, "syspll_ck", "mainpll", 1, @@ -1148,37 +1150,57 @@ static int clk_mt8183_apmixed_probe(struct platform_device *pdev) return of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); } +static struct clk_onecell_data *top_clk_data; + +static void clk_mt8183_top_init_early(struct device_node *node) +{ + int i; + + top_clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK); + + for (i = 0; i < CLK_TOP_NR_CLK; i++) + top_clk_data->clks[i] = ERR_PTR(-EPROBE_DEFER); + + mtk_clk_register_factors(top_early_divs, ARRAY_SIZE(top_early_divs), + top_clk_data); + + of_clk_add_provider(node, of_clk_src_onecell_get, top_clk_data); +} + +CLK_OF_DECLARE_DRIVER(mt8183_topckgen, "mediatek,mt8183-topckgen", + clk_mt8183_top_init_early); + static int clk_mt8183_top_probe(struct platform_device *pdev) { struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); void __iomem *base; - struct clk_onecell_data *clk_data; struct device_node *node = pdev->dev.of_node; base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); - clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK); - mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks), - clk_data); + top_clk_data); + + mtk_clk_register_factors(top_early_divs, ARRAY_SIZE(top_early_divs), + top_clk_data); - mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data); + mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), top_clk_data); mtk_clk_register_muxes(top_muxes, ARRAY_SIZE(top_muxes), - node, &mt8183_clk_lock, clk_data); + node, &mt8183_clk_lock, top_clk_data); mtk_clk_register_composites(top_aud_muxes, ARRAY_SIZE(top_aud_muxes), - base, &mt8183_clk_lock, clk_data); + base, &mt8183_clk_lock, top_clk_data); mtk_clk_register_composites(top_aud_divs, ARRAY_SIZE(top_aud_divs), - base, &mt8183_clk_lock, clk_data); + base, &mt8183_clk_lock, top_clk_data); mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks), - clk_data); + top_clk_data); - return of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + return of_clk_add_provider(node, of_clk_src_onecell_get, top_clk_data); } static int clk_mt8183_infra_probe(struct platform_device *pdev) -- cgit From c9a67cbb5189e966c70451562b2ca4c3876ab546 Mon Sep 17 00:00:00 2001 From: Chunyan Zhang Date: Thu, 18 Jul 2019 13:36:16 +0800 Subject: clk: sprd: Select REGMAP_MMIO to avoid compile errors Make REGMAP_MMIO selected to avoid undefined reference to regmap symbols. Fixes: d41f59fd92f2 ("clk: sprd: Add common infrastructure") Signed-off-by: Chunyan Zhang Signed-off-by: Stephen Boyd --- drivers/clk/sprd/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/sprd/Kconfig b/drivers/clk/sprd/Kconfig index 91d3d721c801..3c219af25100 100644 --- a/drivers/clk/sprd/Kconfig +++ b/drivers/clk/sprd/Kconfig @@ -3,6 +3,7 @@ config SPRD_COMMON_CLK tristate "Clock support for Spreadtrum SoCs" depends on ARCH_SPRD || COMPILE_TEST default ARCH_SPRD + select REGMAP_MMIO if SPRD_COMMON_CLK -- cgit From e1f1ae8002e4b06addc52443fcd975bbf554ae92 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 11 Jul 2019 15:03:59 +0200 Subject: clk: renesas: cpg-mssr: Fix reset control race condition The module reset code in the Renesas CPG/MSSR driver uses read-modify-write (RMW) operations to write to a Software Reset Register (SRCRn), and simple writes to write to a Software Reset Clearing Register (SRSTCLRn), as was mandated by the R-Car Gen2 and Gen3 Hardware User's Manuals. However, this may cause a race condition when two devices are reset in parallel: if the reset for device A completes in the middle of the RMW operation for device B, device A may be reset again, causing subtle failures (e.g. i2c timeouts): thread A thread B -------- -------- val = SRCRn val |= bit A SRCRn = val delay val = SRCRn (bit A is set) SRSTCLRn = bit A (bit A in SRCRn is cleared) val |= bit B SRCRn = val (bit A and B are set) This can be reproduced on e.g. Salvator-XS using: $ while true; do i2cdump -f -y 4 0x6A b > /dev/null; done & $ while true; do i2cdump -f -y 2 0x10 b > /dev/null; done & i2c-rcar e6510000.i2c: error -110 : 40000002 i2c-rcar e66d8000.i2c: error -110 : 40000002 According to the R-Car Gen3 Hardware Manual Errata for Rev. 0.80 of Feb 28, 2018, reflected in Rev. 1.00 of the R-Car Gen3 Hardware User's Manual, writes to SRCRn do not require read-modify-write cycles. Note that the R-Car Gen2 Hardware User's Manual has not been updated yet, and still says a read-modify-write sequence is required. According to the hardware team, the reset hardware block is the same on both R-Car Gen2 and Gen3, though. Hence fix the issue by replacing the read-modify-write operations on SRCRn by simple writes. Reported-by: Yao Lihua Fixes: 6197aa65c4905532 ("clk: renesas: cpg-mssr: Add support for reset control") Signed-off-by: Geert Uytterhoeven Tested-by: Linh Phung Signed-off-by: Stephen Boyd --- drivers/clk/renesas/renesas-cpg-mssr.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c index 52bbb9ce3807..d4075b130674 100644 --- a/drivers/clk/renesas/renesas-cpg-mssr.c +++ b/drivers/clk/renesas/renesas-cpg-mssr.c @@ -572,17 +572,11 @@ static int cpg_mssr_reset(struct reset_controller_dev *rcdev, unsigned int reg = id / 32; unsigned int bit = id % 32; u32 bitmask = BIT(bit); - unsigned long flags; - u32 value; dev_dbg(priv->dev, "reset %u%02u\n", reg, bit); /* Reset module */ - spin_lock_irqsave(&priv->rmw_lock, flags); - value = readl(priv->base + SRCR(reg)); - value |= bitmask; - writel(value, priv->base + SRCR(reg)); - spin_unlock_irqrestore(&priv->rmw_lock, flags); + writel(bitmask, priv->base + SRCR(reg)); /* Wait for at least one cycle of the RCLK clock (@ ca. 32 kHz) */ udelay(35); @@ -599,16 +593,10 @@ static int cpg_mssr_assert(struct reset_controller_dev *rcdev, unsigned long id) unsigned int reg = id / 32; unsigned int bit = id % 32; u32 bitmask = BIT(bit); - unsigned long flags; - u32 value; dev_dbg(priv->dev, "assert %u%02u\n", reg, bit); - spin_lock_irqsave(&priv->rmw_lock, flags); - value = readl(priv->base + SRCR(reg)); - value |= bitmask; - writel(value, priv->base + SRCR(reg)); - spin_unlock_irqrestore(&priv->rmw_lock, flags); + writel(bitmask, priv->base + SRCR(reg)); return 0; } -- cgit From bba18318e7d1d5c8b0bbafd65010a0cee3c65608 Mon Sep 17 00:00:00 2001 From: Maxime Chevallier Date: Fri, 19 Jul 2019 16:38:48 +0200 Subject: net: mvpp2: Don't check for 3 consecutive Idle frames for 10G links PPv2's XLGMAC can wait for 3 idle frames before triggering a link up event. This can cause the link to be stuck low when there's traffic on the interface, so disable this feature. Fixes: 4bb043262878 ("net: mvpp2: phylink support") Signed-off-by: Maxime Chevallier Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index c51f1d5b550b..b6591ea0c6d6 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -4739,9 +4739,9 @@ static void mvpp2_xlg_config(struct mvpp2_port *port, unsigned int mode, else ctrl0 &= ~MVPP22_XLG_CTRL0_RX_FLOW_CTRL_EN; - ctrl4 &= ~MVPP22_XLG_CTRL4_MACMODSELECT_GMAC; - ctrl4 |= MVPP22_XLG_CTRL4_FWD_FC | MVPP22_XLG_CTRL4_FWD_PFC | - MVPP22_XLG_CTRL4_EN_IDLE_CHECK; + ctrl4 &= ~(MVPP22_XLG_CTRL4_MACMODSELECT_GMAC | + MVPP22_XLG_CTRL4_EN_IDLE_CHECK); + ctrl4 |= MVPP22_XLG_CTRL4_FWD_FC | MVPP22_XLG_CTRL4_FWD_PFC; if (old_ctrl0 != ctrl0) writel(ctrl0, port->base + MVPP22_XLG_CTRL0_REG); -- cgit From f4e5f775db5a4631300dccd0de5eafb50a77c131 Mon Sep 17 00:00:00 2001 From: Yonglong Liu Date: Mon, 22 Jul 2019 13:59:12 +0800 Subject: net: hns: fix LED configuration for marvell phy Since commit(net: phy: marvell: change default m88e1510 LED configuration), the active LED of Hip07 devices is always off, because Hip07 just use 2 LEDs. This patch adds a phy_register_fixup_for_uid() for m88e1510 to correct the LED configuration. Fixes: 077772468ec1 ("net: phy: marvell: change default m88e1510 LED configuration") Signed-off-by: Yonglong Liu Reviewed-by: linyunsheng Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c index 2235dd55fab2..5b213eb4f825 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -1149,6 +1150,13 @@ static void hns_nic_adjust_link(struct net_device *ndev) } } +static int hns_phy_marvell_fixup(struct phy_device *phydev) +{ + phydev->dev_flags |= MARVELL_PHY_LED0_LINK_LED1_ACTIVE; + + return 0; +} + /** *hns_nic_init_phy - init phy *@ndev: net device @@ -1174,6 +1182,16 @@ int hns_nic_init_phy(struct net_device *ndev, struct hnae_handle *h) if (h->phy_if != PHY_INTERFACE_MODE_XGMII) { phy_dev->dev_flags = 0; + /* register the PHY fixup (for Marvell 88E1510) */ + ret = phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1510, + MARVELL_PHY_ID_MASK, + hns_phy_marvell_fixup); + /* we can live without it, so just issue a warning */ + if (ret) + netdev_warn(ndev, + "Cannot register PHY fixup, ret=%d\n", + ret); + ret = phy_connect_direct(ndev, phy_dev, hns_nic_adjust_link, h->phy_if); } else { @@ -2430,8 +2448,11 @@ static int hns_nic_dev_remove(struct platform_device *pdev) hns_nic_uninit_ring_data(priv); priv->ring_data = NULL; - if (ndev->phydev) + if (ndev->phydev) { + phy_unregister_fixup_for_uid(MARVELL_PHY_ID_88E1510, + MARVELL_PHY_ID_MASK); phy_disconnect(ndev->phydev); + } if (!IS_ERR_OR_NULL(priv->ae_handle)) hnae_put_handle(priv->ae_handle); -- cgit From cbcf0999ae33e7a8e1dba7ca935556634f679ccf Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Mon, 22 Jul 2019 10:39:30 +0200 Subject: net: stmmac: RX Descriptors need to be clean before setting buffers RX Descriptors are being cleaned after setting the buffers which may lead to buffer addresses being wiped out. Fix this by clearing earlier the RX Descriptors. Fixes: 2af6106ae949 ("net: stmmac: Introducing support for Page Pool") Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index c7c9e5f162e6..5f1294ce0216 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1295,6 +1295,8 @@ static int init_dma_rx_desc_rings(struct net_device *dev, gfp_t flags) "(%s) dma_rx_phy=0x%08x\n", __func__, (u32)rx_q->dma_rx_phy); + stmmac_clear_rx_descriptors(priv, queue); + for (i = 0; i < DMA_RX_SIZE; i++) { struct dma_desc *p; @@ -1312,8 +1314,6 @@ static int init_dma_rx_desc_rings(struct net_device *dev, gfp_t flags) rx_q->cur_rx = 0; rx_q->dirty_rx = (unsigned int)(i - DMA_RX_SIZE); - stmmac_clear_rx_descriptors(priv, queue); - /* Setup the chained descriptor addresses */ if (priv->mode == STMMAC_CHAIN_MODE) { if (priv->extend_desc) -- cgit From ec5e5ce1e18b44d0c4779619de3552e0afa5a11d Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Mon, 22 Jul 2019 10:39:31 +0200 Subject: net: stmmac: Use kcalloc() instead of kmalloc_array() We need the memory to be zeroed upon allocation so use kcalloc() instead. Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 5f1294ce0216..0ac79f3e2cee 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1555,9 +1555,8 @@ static int alloc_dma_rx_desc_resources(struct stmmac_priv *priv) goto err_dma; } - rx_q->buf_pool = kmalloc_array(DMA_RX_SIZE, - sizeof(*rx_q->buf_pool), - GFP_KERNEL); + rx_q->buf_pool = kcalloc(DMA_RX_SIZE, sizeof(*rx_q->buf_pool), + GFP_KERNEL); if (!rx_q->buf_pool) goto err_dma; @@ -1608,15 +1607,15 @@ static int alloc_dma_tx_desc_resources(struct stmmac_priv *priv) tx_q->queue_index = queue; tx_q->priv_data = priv; - tx_q->tx_skbuff_dma = kmalloc_array(DMA_TX_SIZE, - sizeof(*tx_q->tx_skbuff_dma), - GFP_KERNEL); + tx_q->tx_skbuff_dma = kcalloc(DMA_TX_SIZE, + sizeof(*tx_q->tx_skbuff_dma), + GFP_KERNEL); if (!tx_q->tx_skbuff_dma) goto err_dma; - tx_q->tx_skbuff = kmalloc_array(DMA_TX_SIZE, - sizeof(struct sk_buff *), - GFP_KERNEL); + tx_q->tx_skbuff = kcalloc(DMA_TX_SIZE, + sizeof(struct sk_buff *), + GFP_KERNEL); if (!tx_q->tx_skbuff) goto err_dma; -- cgit From df7699c70c1bc1d9333d610fdc91fbbad84b59f2 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Mon, 22 Jul 2019 16:07:21 +0200 Subject: net: stmmac: Do not cut down 1G modes Some glue logic drivers support 1G without having GMAC/GMAC4/XGMAC. Let's allow this speed by default. Reported-by: Ondrej Jirman Tested-by: Ondrej Jirman Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports") Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 0ac79f3e2cee..98b1a5c6d537 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -814,20 +814,15 @@ static void stmmac_validate(struct phylink_config *config, phylink_set(mac_supported, 10baseT_Full); phylink_set(mac_supported, 100baseT_Half); phylink_set(mac_supported, 100baseT_Full); + phylink_set(mac_supported, 1000baseT_Half); + phylink_set(mac_supported, 1000baseT_Full); + phylink_set(mac_supported, 1000baseKX_Full); phylink_set(mac_supported, Autoneg); phylink_set(mac_supported, Pause); phylink_set(mac_supported, Asym_Pause); phylink_set_port_modes(mac_supported); - if (priv->plat->has_gmac || - priv->plat->has_gmac4 || - priv->plat->has_xgmac) { - phylink_set(mac_supported, 1000baseT_Half); - phylink_set(mac_supported, 1000baseT_Full); - phylink_set(mac_supported, 1000baseKX_Full); - } - /* Cut down 1G if asked to */ if ((max_speed > 0) && (max_speed < 1000)) { phylink_set(mask, 1000baseT_Full); -- cgit From b3e487c0cf425369a48049251af75593a5652dc1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 22 Jul 2019 20:44:48 -0700 Subject: Revert "net: hns: fix LED configuration for marvell phy" This reverts commit f4e5f775db5a4631300dccd0de5eafb50a77c131. Andrew Lunn says this should be handled another way. Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns/hns_enet.c | 23 +---------------------- 1 file changed, 1 insertion(+), 22 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns/hns_enet.c b/drivers/net/ethernet/hisilicon/hns/hns_enet.c index 5b213eb4f825..2235dd55fab2 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -1150,13 +1149,6 @@ static void hns_nic_adjust_link(struct net_device *ndev) } } -static int hns_phy_marvell_fixup(struct phy_device *phydev) -{ - phydev->dev_flags |= MARVELL_PHY_LED0_LINK_LED1_ACTIVE; - - return 0; -} - /** *hns_nic_init_phy - init phy *@ndev: net device @@ -1182,16 +1174,6 @@ int hns_nic_init_phy(struct net_device *ndev, struct hnae_handle *h) if (h->phy_if != PHY_INTERFACE_MODE_XGMII) { phy_dev->dev_flags = 0; - /* register the PHY fixup (for Marvell 88E1510) */ - ret = phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1510, - MARVELL_PHY_ID_MASK, - hns_phy_marvell_fixup); - /* we can live without it, so just issue a warning */ - if (ret) - netdev_warn(ndev, - "Cannot register PHY fixup, ret=%d\n", - ret); - ret = phy_connect_direct(ndev, phy_dev, hns_nic_adjust_link, h->phy_if); } else { @@ -2448,11 +2430,8 @@ static int hns_nic_dev_remove(struct platform_device *pdev) hns_nic_uninit_ring_data(priv); priv->ring_data = NULL; - if (ndev->phydev) { - phy_unregister_fixup_for_uid(MARVELL_PHY_ID_88E1510, - MARVELL_PHY_ID_MASK); + if (ndev->phydev) phy_disconnect(ndev->phydev); - } if (!IS_ERR_OR_NULL(priv->ae_handle)) hnae_put_handle(priv->ae_handle); -- cgit From bca031e2c8aa22a978a2452bf959e27e9fa73dc7 Mon Sep 17 00:00:00 2001 From: Zenghui Yu Date: Thu, 18 Jul 2019 08:15:10 +0000 Subject: KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter index We use "pmc->idx" and the "chained" bitmap to determine if the pmc is chained, in kvm_pmu_pmc_is_chained(). But idx might be uninitialized (and random) when we doing this decision, through a KVM_ARM_VCPU_INIT ioctl -> kvm_pmu_vcpu_reset(). And the test_bit() against this random idx will potentially hit a KASAN BUG [1]. In general, idx is the static property of a PMU counter that is not expected to be modified across resets, as suggested by Julien. It looks more reasonable if we can setup the PMU counter idx for a vcpu in its creation time. Introduce a new function - kvm_pmu_vcpu_init() for this basic setup. Oh, and the KASAN BUG will get fixed this way. [1] https://www.spinics.net/lists/kvm-arm/msg36700.html Fixes: 80f393a23be6 ("KVM: arm/arm64: Support chained PMU counters") Suggested-by: Andrew Murray Suggested-by: Julien Thierry Acked-by: Julien Thierry Signed-off-by: Zenghui Yu Signed-off-by: Marc Zyngier --- include/kvm/arm_pmu.h | 2 ++ virt/kvm/arm/arm.c | 2 ++ virt/kvm/arm/pmu.c | 18 +++++++++++++++--- 3 files changed, 19 insertions(+), 3 deletions(-) diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h index 16c769a7f979..6db030439e29 100644 --- a/include/kvm/arm_pmu.h +++ b/include/kvm/arm_pmu.h @@ -34,6 +34,7 @@ struct kvm_pmu { u64 kvm_pmu_get_counter_value(struct kvm_vcpu *vcpu, u64 select_idx); void kvm_pmu_set_counter_value(struct kvm_vcpu *vcpu, u64 select_idx, u64 val); u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu); +void kvm_pmu_vcpu_init(struct kvm_vcpu *vcpu); void kvm_pmu_vcpu_reset(struct kvm_vcpu *vcpu); void kvm_pmu_vcpu_destroy(struct kvm_vcpu *vcpu); void kvm_pmu_disable_counter_mask(struct kvm_vcpu *vcpu, u64 val); @@ -71,6 +72,7 @@ static inline u64 kvm_pmu_valid_counter_mask(struct kvm_vcpu *vcpu) { return 0; } +static inline void kvm_pmu_vcpu_init(struct kvm_vcpu *vcpu) {} static inline void kvm_pmu_vcpu_reset(struct kvm_vcpu *vcpu) {} static inline void kvm_pmu_vcpu_destroy(struct kvm_vcpu *vcpu) {} static inline void kvm_pmu_disable_counter_mask(struct kvm_vcpu *vcpu, u64 val) {} diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c index f645c0fbf7ec..c704fa696184 100644 --- a/virt/kvm/arm/arm.c +++ b/virt/kvm/arm/arm.c @@ -340,6 +340,8 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) /* Set up the timer */ kvm_timer_vcpu_init(vcpu); + kvm_pmu_vcpu_init(vcpu); + kvm_arm_reset_debug_ptr(vcpu); return kvm_vgic_vcpu_init(vcpu); diff --git a/virt/kvm/arm/pmu.c b/virt/kvm/arm/pmu.c index 3dd8238ed246..362a01886bab 100644 --- a/virt/kvm/arm/pmu.c +++ b/virt/kvm/arm/pmu.c @@ -214,6 +214,20 @@ static void kvm_pmu_stop_counter(struct kvm_vcpu *vcpu, struct kvm_pmc *pmc) kvm_pmu_release_perf_event(pmc); } +/** + * kvm_pmu_vcpu_init - assign pmu counter idx for cpu + * @vcpu: The vcpu pointer + * + */ +void kvm_pmu_vcpu_init(struct kvm_vcpu *vcpu) +{ + int i; + struct kvm_pmu *pmu = &vcpu->arch.pmu; + + for (i = 0; i < ARMV8_PMU_MAX_COUNTERS; i++) + pmu->pmc[i].idx = i; +} + /** * kvm_pmu_vcpu_reset - reset pmu state for cpu * @vcpu: The vcpu pointer @@ -224,10 +238,8 @@ void kvm_pmu_vcpu_reset(struct kvm_vcpu *vcpu) int i; struct kvm_pmu *pmu = &vcpu->arch.pmu; - for (i = 0; i < ARMV8_PMU_MAX_COUNTERS; i++) { + for (i = 0; i < ARMV8_PMU_MAX_COUNTERS; i++) kvm_pmu_stop_counter(vcpu, &pmu->pmc[i]); - pmu->pmc[i].idx = i; - } bitmap_zero(vcpu->arch.pmu.chained, ARMV8_PMU_MAX_COUNTER_PAIRS); } -- cgit From 8201f11a1f75e3aa7d5327d0b1d8cb544aeaa62f Mon Sep 17 00:00:00 2001 From: Stephan Gerhold Date: Mon, 22 Jul 2019 15:03:52 +0200 Subject: ASoC: qcom: apq8016_sbc: Fix oops with multiple DAI links apq8016_sbc_parse_of() sets up multiple DAI links, depending on the number of nodes in the device tree. However, at the moment CPU and platform components are only allocated for the first link. This causes an oops when more than one link is defined: Internal error: Oops: 96000044 [#1] SMP CPU: 0 PID: 1015 Comm: kworker/0:2 Not tainted 5.3.0-rc1 #4 Call trace: apq8016_sbc_platform_probe+0x1a8/0x3f0 platform_drv_probe+0x50/0xa0 ... Move the allocation inside the loop to ensure that each link is properly initialized. Fixes: 98b232ca9e0e ("ASoC: qcom: apq8016_sbc: use modern dai_link style") Signed-off-by: Stephan Gerhold Acked-by: Kuninori Morimoto Link: https://lore.kernel.org/r/20190722130352.95874-1-stephan@gerhold.net Signed-off-by: Mark Brown --- sound/soc/qcom/apq8016_sbc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/sound/soc/qcom/apq8016_sbc.c b/sound/soc/qcom/apq8016_sbc.c index f60a71990f66..ac75838bbfab 100644 --- a/sound/soc/qcom/apq8016_sbc.c +++ b/sound/soc/qcom/apq8016_sbc.c @@ -150,17 +150,17 @@ static struct apq8016_sbc_data *apq8016_sbc_parse_of(struct snd_soc_card *card) link = data->dai_link; - dlc = devm_kzalloc(dev, 2 * sizeof(*dlc), GFP_KERNEL); - if (!dlc) - return ERR_PTR(-ENOMEM); + for_each_child_of_node(node, np) { + dlc = devm_kzalloc(dev, 2 * sizeof(*dlc), GFP_KERNEL); + if (!dlc) + return ERR_PTR(-ENOMEM); - link->cpus = &dlc[0]; - link->platforms = &dlc[1]; + link->cpus = &dlc[0]; + link->platforms = &dlc[1]; - link->num_cpus = 1; - link->num_platforms = 1; + link->num_cpus = 1; + link->num_platforms = 1; - for_each_child_of_node(node, np) { cpu = of_get_child_by_name(np, "cpu"); codec = of_get_child_by_name(np, "codec"); -- cgit From 717dedb1dcee92788b81233aa0a221573c95daff Mon Sep 17 00:00:00 2001 From: Kai Vehmanen Date: Mon, 22 Jul 2019 09:14:01 -0500 Subject: ASoC: SOF: Intel: hda: remove misleading error trace from IRQ thread Downgrade "nothing to do in IRQ thread" message from error to a debug message in the IPC interrupt handler thread. The spurious wake-up can happen if a HDA stream interrupt is raised while the IPC interrupt thread is running. IPC functionality is not impacted by this condition, so debug is a more appropriate trace level. Signed-off-by: Kai Vehmanen Signed-off-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20190722141402.7194-21-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/intel/cnl.c | 4 ++-- sound/soc/sof/intel/hda-ipc.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/sof/intel/cnl.c b/sound/soc/sof/intel/cnl.c index f2b392998f20..ffd8d4394537 100644 --- a/sound/soc/sof/intel/cnl.c +++ b/sound/soc/sof/intel/cnl.c @@ -101,8 +101,8 @@ static irqreturn_t cnl_ipc_irq_thread(int irq, void *context) /* * This interrupt is not shared so no need to return IRQ_NONE. */ - dev_err_ratelimited(sdev->dev, - "error: nothing to do in IRQ thread\n"); + dev_dbg_ratelimited(sdev->dev, + "nothing to do in IPC IRQ thread\n"); } /* re-enable IPC interrupt */ diff --git a/sound/soc/sof/intel/hda-ipc.c b/sound/soc/sof/intel/hda-ipc.c index 50244b82600c..2ecba91f5219 100644 --- a/sound/soc/sof/intel/hda-ipc.c +++ b/sound/soc/sof/intel/hda-ipc.c @@ -224,8 +224,8 @@ irqreturn_t hda_dsp_ipc_irq_thread(int irq, void *context) /* * This interrupt is not shared so no need to return IRQ_NONE. */ - dev_err_ratelimited(sdev->dev, - "error: nothing to do in IRQ thread\n"); + dev_dbg_ratelimited(sdev->dev, + "nothing to do in IPC IRQ thread\n"); } /* re-enable IPC interrupt */ -- cgit From 020834bebbcb5db4026757556710ea58ccb76a06 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 23 Jul 2019 16:41:35 +0300 Subject: Input: applespi - select CRC16 module In some rare randconfig builds, CRC16 is disabled, which leads to a link error: drivers/input/keyboard/applespi.o: In function `applespi_send_cmd_msg': applespi.c:(.text+0x449f): undefined reference to `crc16' drivers/input/keyboard/applespi.o: In function `applespi_verify_crc': applespi.c:(.text+0x7538): undefined reference to `crc16' This symbol is meant to be selected for each user in Kconfig, so do that here as well. Fixes: 038b1a05eae6 ("Input: add Apple SPI keyboard and trackpad driver") Signed-off-by: Arnd Bergmann Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 8e9c3ea9d5e7..ebb19e21473e 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -76,6 +76,7 @@ config KEYBOARD_APPLESPI depends on ACPI && EFI depends on SPI depends on X86 || COMPILE_TEST + select CRC16 help Say Y here if you are running Linux on any Apple MacBook8,1 or later, or any MacBookPro13,* or MacBookPro14,*. -- cgit From b1cbb2f09d7b3f1726215987d5b28f5aea9548da Mon Sep 17 00:00:00 2001 From: Nikolas Nyby Date: Tue, 23 Jul 2019 16:42:57 +0300 Subject: Input: applespi - fix trivial typo in struct description This fixes a typo in the keyboard_protocol description. coodinate -> coordinate. Signed-off-by: Nikolas Nyby Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/applespi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/input/keyboard/applespi.c b/drivers/input/keyboard/applespi.c index 52d394f473a2..acf34a5ff571 100644 --- a/drivers/input/keyboard/applespi.c +++ b/drivers/input/keyboard/applespi.c @@ -134,10 +134,10 @@ struct keyboard_protocol { * struct tp_finger - single trackpad finger structure, le16-aligned * * @origin: zero when switching track finger - * @abs_x: absolute x coodinate - * @abs_y: absolute y coodinate - * @rel_x: relative x coodinate - * @rel_y: relative y coodinate + * @abs_x: absolute x coordinate + * @abs_y: absolute y coordinate + * @rel_x: relative x coordinate + * @rel_y: relative y coordinate * @tool_major: tool area, major axis * @tool_minor: tool area, minor axis * @orientation: 16384 when point, else 15 bit angle -- cgit From 883a2a80f79ca5c0c105605fafabd1f3df99b34c Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Mon, 22 Jul 2019 10:56:55 +0300 Subject: Input: elantech - enable SMBus on new (2018+) systems There are some new HP laptops with Elantech touchpad that don't support multitouch. Currently we use ETP_NEW_IC_SMBUS_HOST_NOTIFY() to check if SMBus is supported, but in addition to firmware version, the bus type also informs us whether the IC can support SMBus. To avoid breaking old ICs, we will only enable SMbus support based the bus type on systems manufactured after 2018. Lastly, let's consolidate all checks into elantech_use_host_notify() and use it to determine whether to use PS/2 or SMBus. Signed-off-by: Kai-Heng Feng Acked-by: Benjamin Tissoires Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 54 +++++++++++++++++++----------------------- 1 file changed, 25 insertions(+), 29 deletions(-) diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 2d8434b7b623..73544776a9ed 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1827,6 +1827,30 @@ static int elantech_create_smbus(struct psmouse *psmouse, leave_breadcrumbs); } +static bool elantech_use_host_notify(struct psmouse *psmouse, + struct elantech_device_info *info) +{ + if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version)) + return true; + + switch (info->bus) { + case ETP_BUS_PS2_ONLY: + /* expected case */ + break; + case ETP_BUS_SMB_HST_NTFY_ONLY: + case ETP_BUS_PS2_SMB_HST_NTFY: + /* SMbus implementation is stable since 2018 */ + if (dmi_get_bios_year() >= 2018) + return true; + default: + psmouse_dbg(psmouse, + "Ignoring SMBus bus provider %d\n", info->bus); + break; + } + + return false; +} + /** * elantech_setup_smbus - called once the PS/2 devices are enumerated * and decides to instantiate a SMBus InterTouch device. @@ -1846,7 +1870,7 @@ static int elantech_setup_smbus(struct psmouse *psmouse, * i2c_blacklist_pnp_ids. * Old ICs are up to the user to decide. */ - if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) || + if (!elantech_use_host_notify(psmouse, info) || psmouse_matches_pnp_id(psmouse, i2c_blacklist_pnp_ids)) return -ENXIO; } @@ -1866,34 +1890,6 @@ static int elantech_setup_smbus(struct psmouse *psmouse, return 0; } -static bool elantech_use_host_notify(struct psmouse *psmouse, - struct elantech_device_info *info) -{ - if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version)) - return true; - - switch (info->bus) { - case ETP_BUS_PS2_ONLY: - /* expected case */ - break; - case ETP_BUS_SMB_ALERT_ONLY: - /* fall-through */ - case ETP_BUS_PS2_SMB_ALERT: - psmouse_dbg(psmouse, "Ignoring SMBus provider through alert protocol.\n"); - break; - case ETP_BUS_SMB_HST_NTFY_ONLY: - /* fall-through */ - case ETP_BUS_PS2_SMB_HST_NTFY: - return true; - default: - psmouse_dbg(psmouse, - "Ignoring SMBus bus provider %d.\n", - info->bus); - } - - return false; -} - int elantech_init_smbus(struct psmouse *psmouse) { struct elantech_device_info info; -- cgit From 36876b30d2143121322cd199cc23f27143912deb Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Tue, 23 Jul 2019 19:22:52 +0900 Subject: selftests: kmod: Fix typo in kmod.sh This patch fixes some spelling typos in kmod.sh Signed-off-by: Masanari Iida Acked-by: Randy Dunlap Signed-off-by: Shuah Khan --- tools/testing/selftests/kmod/kmod.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/kmod/kmod.sh b/tools/testing/selftests/kmod/kmod.sh index 0a76314b4414..8b944cf042f6 100755 --- a/tools/testing/selftests/kmod/kmod.sh +++ b/tools/testing/selftests/kmod/kmod.sh @@ -28,7 +28,7 @@ # override by exporting to your environment prior running this script. # For instance this script assumes you do not have xfs loaded upon boot. # If this is false, export DEFAULT_KMOD_FS="ext4" prior to running this -# script if the filesyste module you don't have loaded upon bootup +# script if the filesystem module you don't have loaded upon bootup # is ext4 instead. Refer to allow_user_defaults() for a list of user # override variables possible. # @@ -263,7 +263,7 @@ config_get_test_result() config_reset() { if ! echo -n "1" >"$DIR"/reset; then - echo "$0: reset shuld have worked" >&2 + echo "$0: reset should have worked" >&2 exit 1 fi } @@ -488,7 +488,7 @@ usage() echo Example uses: echo echo "${TEST_NAME}.sh -- executes all tests" - echo "${TEST_NAME}.sh -t 0008 -- Executes test ID 0008 number of times is recomended" + echo "${TEST_NAME}.sh -t 0008 -- Executes test ID 0008 number of times is recommended" echo "${TEST_NAME}.sh -w 0008 -- Watch test ID 0008 run until an error occurs" echo "${TEST_NAME}.sh -s 0008 -- Run test ID 0008 once" echo "${TEST_NAME}.sh -c 0008 3 -- Run test ID 0008 three times" -- cgit From 399ea57a4c8bc5fdb71a024a6870b5767b2ef6d8 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 1 Jul 2019 14:04:31 +0100 Subject: selftests/x86: fix spelling mistake "FAILT" -> "FAIL" There is an spelling mistake in an a test error message. Fix it. Acked-by: Andy Lutomirski Signed-off-by: Colin Ian King Signed-off-by: Shuah Khan --- tools/testing/selftests/x86/test_vsyscall.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/x86/test_vsyscall.c b/tools/testing/selftests/x86/test_vsyscall.c index 4602326b8f5b..a4f4d4cf22c3 100644 --- a/tools/testing/selftests/x86/test_vsyscall.c +++ b/tools/testing/selftests/x86/test_vsyscall.c @@ -451,7 +451,7 @@ static int test_vsys_x(void) printf("[OK]\tExecuting the vsyscall page failed: #PF(0x%lx)\n", segv_err); } else { - printf("[FAILT]\tExecution failed with the wrong error: #PF(0x%lx)\n", + printf("[FAIL]\tExecution failed with the wrong error: #PF(0x%lx)\n", segv_err); return 1; } -- cgit From efa7b79f675da0efafe3f32ba0d6efe916cf4867 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Tue, 23 Jul 2019 11:19:25 +0300 Subject: selftests: forwarding: gre_multipath: Enable IPv4 forwarding The test did not enable IPv4 forwarding during its setup phase, which causes the test to fail on machines where IPv4 forwarding is disabled. Fixes: 54818c4c4b93 ("selftests: forwarding: Test multipath tunneling") Signed-off-by: Ido Schimmel Reported-by: Stephen Suryaputra Tested-by: Stephen Suryaputra Signed-off-by: David S. Miller --- tools/testing/selftests/net/forwarding/gre_multipath.sh | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/testing/selftests/net/forwarding/gre_multipath.sh b/tools/testing/selftests/net/forwarding/gre_multipath.sh index cca2baa03fb8..37d7297e1cf8 100755 --- a/tools/testing/selftests/net/forwarding/gre_multipath.sh +++ b/tools/testing/selftests/net/forwarding/gre_multipath.sh @@ -187,12 +187,16 @@ setup_prepare() sw1_create sw2_create h2_create + + forwarding_enable } cleanup() { pre_cleanup + forwarding_restore + h2_destroy sw2_destroy sw1_destroy -- cgit From 1be79d89b7ae96e004911bd228ce8c2b5cc6415f Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Tue, 23 Jul 2019 11:19:26 +0300 Subject: selftests: forwarding: gre_multipath: Fix flower filters The TC filters used in the test do not work with veth devices because the outer Ethertype is 802.1Q and not IPv4. The test passes with mlxsw netdevs since the hardware always looks at "The first Ethertype that does not point to either: VLAN, CNTAG or configurable Ethertype". Fix this by matching on the VLAN ID instead, but on the ingress side. The reason why this is not performed at egress is explained in the commit cited below. Fixes: 541ad323db3a ("selftests: forwarding: gre_multipath: Update next-hop statistics match criteria") Signed-off-by: Ido Schimmel Reported-by: Stephen Suryaputra Tested-by: Stephen Suryaputra Signed-off-by: David S. Miller --- .../selftests/net/forwarding/gre_multipath.sh | 24 +++++++++++----------- 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/tools/testing/selftests/net/forwarding/gre_multipath.sh b/tools/testing/selftests/net/forwarding/gre_multipath.sh index 37d7297e1cf8..a8d8e8b3dc81 100755 --- a/tools/testing/selftests/net/forwarding/gre_multipath.sh +++ b/tools/testing/selftests/net/forwarding/gre_multipath.sh @@ -93,18 +93,10 @@ sw1_create() ip route add vrf v$ol1 192.0.2.16/28 \ nexthop dev g1a \ nexthop dev g1b - - tc qdisc add dev $ul1 clsact - tc filter add dev $ul1 egress pref 111 prot ipv4 \ - flower dst_ip 192.0.2.66 action pass - tc filter add dev $ul1 egress pref 222 prot ipv4 \ - flower dst_ip 192.0.2.82 action pass } sw1_destroy() { - tc qdisc del dev $ul1 clsact - ip route del vrf v$ol1 192.0.2.16/28 ip route del vrf v$ol1 192.0.2.82/32 via 192.0.2.146 @@ -139,10 +131,18 @@ sw2_create() ip route add vrf v$ol2 192.0.2.0/28 \ nexthop dev g2a \ nexthop dev g2b + + tc qdisc add dev $ul2 clsact + tc filter add dev $ul2 ingress pref 111 prot 802.1Q \ + flower vlan_id 111 action pass + tc filter add dev $ul2 ingress pref 222 prot 802.1Q \ + flower vlan_id 222 action pass } sw2_destroy() { + tc qdisc del dev $ul2 clsact + ip route del vrf v$ol2 192.0.2.0/28 ip route del vrf v$ol2 192.0.2.81/32 via 192.0.2.145 @@ -215,15 +215,15 @@ multipath4_test() nexthop dev g1a weight $weight1 \ nexthop dev g1b weight $weight2 - local t0_111=$(tc_rule_stats_get $ul1 111 egress) - local t0_222=$(tc_rule_stats_get $ul1 222 egress) + local t0_111=$(tc_rule_stats_get $ul2 111 ingress) + local t0_222=$(tc_rule_stats_get $ul2 222 ingress) ip vrf exec v$h1 \ $MZ $h1 -q -p 64 -A 192.0.2.1 -B 192.0.2.18 \ -d 1msec -t udp "sp=1024,dp=0-32768" - local t1_111=$(tc_rule_stats_get $ul1 111 egress) - local t1_222=$(tc_rule_stats_get $ul1 222 egress) + local t1_111=$(tc_rule_stats_get $ul2 111 ingress) + local t1_222=$(tc_rule_stats_get $ul2 222 ingress) local d111=$((t1_111 - t0_111)) local d222=$((t1_222 - t0_222)) -- cgit From 78e420408d12eddd0e72613fc717f7994736ea9a Mon Sep 17 00:00:00 2001 From: Nishka Dasgupta Date: Tue, 23 Jul 2019 16:13:07 +0530 Subject: net: dsa: mv88e6xxx: chip: Add of_node_put() before return Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index 6b17cd961d06..c97dea4599a8 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -2721,6 +2721,7 @@ static int mv88e6xxx_mdios_register(struct mv88e6xxx_chip *chip, err = mv88e6xxx_mdio_register(chip, child, true); if (err) { mv88e6xxx_mdios_unregister(chip); + of_node_put(child); return err; } } -- cgit From 7ba771e3e246fa8787abf2cce9064ec8c9b38133 Mon Sep 17 00:00:00 2001 From: Nishka Dasgupta Date: Tue, 23 Jul 2019 16:14:48 +0530 Subject: net: dsa: sja1105: sja1105_main: Add of_node_put() Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 32bf3a7cc3b6..6ed5f1e35789 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -625,6 +625,7 @@ static int sja1105_parse_ports_node(struct sja1105_private *priv, if (of_property_read_u32(child, "reg", &index) < 0) { dev_err(dev, "Port number not defined in device tree " "(property \"reg\")\n"); + of_node_put(child); return -ENODEV; } @@ -634,6 +635,7 @@ static int sja1105_parse_ports_node(struct sja1105_private *priv, dev_err(dev, "Failed to read phy-mode or " "phy-interface-type property for port %d\n", index); + of_node_put(child); return -ENODEV; } ports[index].phy_mode = phy_mode; @@ -643,6 +645,7 @@ static int sja1105_parse_ports_node(struct sja1105_private *priv, if (!of_phy_is_fixed_link(child)) { dev_err(dev, "phy-handle or fixed-link " "properties missing!\n"); + of_node_put(child); return -ENODEV; } /* phy-handle is missing, but fixed-link isn't. -- cgit From a261e3797506bd561700be643fe1a85bf81e9661 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 23 Jul 2019 17:15:25 +0200 Subject: sky2: Disable MSI on ASUS P6T The onboard sky2 NIC on ASUS P6T WS PRO doesn't work after PM resume due to the infamous IRQ problem. Disabling MSI works around it, so let's add it to the blacklist. Unfortunately the BIOS on the machine doesn't fill the standard DMI_SYS_* entry, so we pick up DMI_BOARD_* entries instead. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1142496 Reported-and-tested-by: Marcus Seyfarth Signed-off-by: Takashi Iwai Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index f518312ffe69..a01c75ede871 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -4924,6 +4924,13 @@ static const struct dmi_system_id msi_blacklist[] = { DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"), }, }, + { + .ident = "ASUS P6T", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P6T"), + }, + }, {} }; -- cgit From d9b8aadaffa65809d146cf0f8632a22a946367d7 Mon Sep 17 00:00:00 2001 From: Ilya Leoshkevich Date: Fri, 19 Jul 2019 11:18:15 +0200 Subject: bpf: fix narrower loads on s390 The very first check in test_pkt_md_access is failing on s390, which happens because loading a part of a struct __sk_buff field produces an incorrect result. The preprocessed code of the check is: { __u8 tmp = *((volatile __u8 *)&skb->len + ((sizeof(skb->len) - sizeof(__u8)) / sizeof(__u8))); if (tmp != ((*(volatile __u32 *)&skb->len) & 0xFF)) return 2; }; clang generates the following code for it: 0: 71 21 00 03 00 00 00 00 r2 = *(u8 *)(r1 + 3) 1: 61 31 00 00 00 00 00 00 r3 = *(u32 *)(r1 + 0) 2: 57 30 00 00 00 00 00 ff r3 &= 255 3: 5d 23 00 1d 00 00 00 00 if r2 != r3 goto +29 Finally, verifier transforms it to: 0: (61) r2 = *(u32 *)(r1 +104) 1: (bc) w2 = w2 2: (74) w2 >>= 24 3: (bc) w2 = w2 4: (54) w2 &= 255 5: (bc) w2 = w2 The problem is that when verifier emits the code to replace a partial load of a struct __sk_buff field (*(u8 *)(r1 + 3)) with a full load of struct sk_buff field (*(u32 *)(r1 + 104)), an optional shift and a bitwise AND, it assumes that the machine is little endian and incorrectly decides to use a shift. Adjust shift count calculation to account for endianness. Fixes: 31fd85816dbe ("bpf: permits narrower load from bpf program context fields") Signed-off-by: Ilya Leoshkevich Signed-off-by: Alexei Starovoitov --- include/linux/filter.h | 13 +++++++++++++ kernel/bpf/verifier.c | 4 ++-- 2 files changed, 15 insertions(+), 2 deletions(-) diff --git a/include/linux/filter.h b/include/linux/filter.h index ff65d22cf336..92c6e31fb008 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -24,6 +24,7 @@ #include +#include #include #include @@ -747,6 +748,18 @@ bpf_ctx_narrow_access_ok(u32 off, u32 size, u32 size_default) return size <= size_default && (size & (size - 1)) == 0; } +static inline u8 +bpf_ctx_narrow_load_shift(u32 off, u32 size, u32 size_default) +{ + u8 load_off = off & (size_default - 1); + +#ifdef __LITTLE_ENDIAN + return load_off * 8; +#else + return (size_default - (load_off + size)) * 8; +#endif +} + #define bpf_ctx_wide_access_ok(off, size, type, field) \ (size == sizeof(__u64) && \ off >= offsetof(type, field) && \ diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 5900cbb966b1..c84d83f86141 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -8616,8 +8616,8 @@ static int convert_ctx_accesses(struct bpf_verifier_env *env) } if (is_narrower_load && size < target_size) { - u8 shift = (off & (size_default - 1)) * 8; - + u8 shift = bpf_ctx_narrow_load_shift(off, size, + size_default); if (ctx_field_size <= 4) { if (shift) insn_buf[cnt++] = BPF_ALU32_IMM(BPF_RSH, -- cgit From d86afb89305de205b0d2f20c2160adf039e9508d Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 23 Jul 2019 23:03:43 +0300 Subject: net: thunderx: Use fwnode_get_mac_address() Replace the custom implementation with fwnode_get_mac_address, which works on both DT and ACPI platforms. While here, replace memcpy() by ether_addr_copy(). Signed-off-by: Andy Shevchenko Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c index ad22554857bf..acb016834f04 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c @@ -1381,24 +1381,18 @@ static int acpi_get_mac_address(struct device *dev, struct acpi_device *adev, u8 *dst) { u8 mac[ETH_ALEN]; - int ret; + u8 *addr; - ret = fwnode_property_read_u8_array(acpi_fwnode_handle(adev), - "mac-address", mac, ETH_ALEN); - if (ret) - goto out; - - if (!is_valid_ether_addr(mac)) { + addr = fwnode_get_mac_address(acpi_fwnode_handle(adev), mac, ETH_ALEN); + if (!addr) { dev_err(dev, "MAC address invalid: %pM\n", mac); - ret = -EINVAL; - goto out; + return -EINVAL; } dev_info(dev, "MAC address set to: %pM\n", mac); - memcpy(dst, mac, ETH_ALEN); -out: - return ret; + ether_addr_copy(dst, mac); + return 0; } /* Currently only sets the MAC address. */ -- cgit From 06a22d897d82f12776d44dbf0850f5895469cb2a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 23 Jul 2019 03:15:37 -0700 Subject: bpf: fix access to skb_shared_info->gso_segs It is possible we reach bpf_convert_ctx_access() with si->dst_reg == si->src_reg Therefore, we need to load BPF_REG_AX before eventually mangling si->src_reg. syzbot generated this x86 code : 3: 55 push %rbp 4: 48 89 e5 mov %rsp,%rbp 7: 48 81 ec 00 00 00 00 sub $0x0,%rsp // Might be avoided ? e: 53 push %rbx f: 41 55 push %r13 11: 41 56 push %r14 13: 41 57 push %r15 15: 6a 00 pushq $0x0 17: 31 c0 xor %eax,%eax 19: 48 8b bf c0 00 00 00 mov 0xc0(%rdi),%rdi 20: 44 8b 97 bc 00 00 00 mov 0xbc(%rdi),%r10d 27: 4c 01 d7 add %r10,%rdi 2a: 48 0f b7 7f 06 movzwq 0x6(%rdi),%rdi // Crash 2f: 5b pop %rbx 30: 41 5f pop %r15 32: 41 5e pop %r14 34: 41 5d pop %r13 36: 5b pop %rbx 37: c9 leaveq 38: c3 retq Fixes: d9ff286a0f59 ("bpf: allow BPF programs access skb_shared_info->gso_segs field") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: Alexei Starovoitov --- net/core/filter.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/core/filter.c b/net/core/filter.c index 4e2a79b2fd77..7878f918b8c0 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -7455,12 +7455,12 @@ static u32 bpf_convert_ctx_access(enum bpf_access_type type, case offsetof(struct __sk_buff, gso_segs): /* si->dst_reg = skb_shinfo(SKB); */ #ifdef NET_SKBUFF_DATA_USES_OFFSET - *insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct sk_buff, head), - si->dst_reg, si->src_reg, - offsetof(struct sk_buff, head)); *insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct sk_buff, end), BPF_REG_AX, si->src_reg, offsetof(struct sk_buff, end)); + *insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct sk_buff, head), + si->dst_reg, si->src_reg, + offsetof(struct sk_buff, head)); *insn++ = BPF_ALU64_REG(BPF_ADD, si->dst_reg, BPF_REG_AX); #else *insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct sk_buff, end), -- cgit From be69483bf4f3abaaca5d5ba460dbb50239463552 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 23 Jul 2019 03:15:38 -0700 Subject: selftests/bpf: add another gso_segs access Use BPF_REG_1 for source and destination of gso_segs read, to exercise "bpf: fix access to skb_shared_info->gso_segs" fix. Signed-off-by: Eric Dumazet Suggested-by: Stanislav Fomichev Signed-off-by: Alexei Starovoitov --- tools/testing/selftests/bpf/verifier/ctx_skb.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/tools/testing/selftests/bpf/verifier/ctx_skb.c b/tools/testing/selftests/bpf/verifier/ctx_skb.c index b0fda2877119..d438193804b2 100644 --- a/tools/testing/selftests/bpf/verifier/ctx_skb.c +++ b/tools/testing/selftests/bpf/verifier/ctx_skb.c @@ -974,6 +974,17 @@ .result = ACCEPT, .prog_type = BPF_PROG_TYPE_CGROUP_SKB, }, +{ + "read gso_segs from CGROUP_SKB", + .insns = { + BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_1, + offsetof(struct __sk_buff, gso_segs)), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + }, + .result = ACCEPT, + .prog_type = BPF_PROG_TYPE_CGROUP_SKB, +}, { "write gso_segs from CGROUP_SKB", .insns = { -- cgit From decb705e01a5d325c9876b9674043cde4b54f0db Mon Sep 17 00:00:00 2001 From: Ilya Maximets Date: Tue, 23 Jul 2019 15:08:10 +0300 Subject: libbpf: fix using uninitialized ioctl results 'channels.max_combined' initialized only on ioctl success and errno is only valid on ioctl failure. The code doesn't produce any runtime issues, but makes memory sanitizers angry: Conditional jump or move depends on uninitialised value(s) at 0x55C056F: xsk_get_max_queues (xsk.c:336) by 0x55C05B2: xsk_create_bpf_maps (xsk.c:354) by 0x55C089F: xsk_setup_xdp_prog (xsk.c:447) by 0x55C0E57: xsk_socket__create (xsk.c:601) Uninitialised value was created by a stack allocation at 0x55C04CD: xsk_get_max_queues (xsk.c:318) Additionally fixed warning on uninitialized bytes in ioctl arguments: Syscall param ioctl(SIOCETHTOOL) points to uninitialised byte(s) at 0x648D45B: ioctl (in /usr/lib64/libc-2.28.so) by 0x55C0546: xsk_get_max_queues (xsk.c:330) by 0x55C05B2: xsk_create_bpf_maps (xsk.c:354) by 0x55C089F: xsk_setup_xdp_prog (xsk.c:447) by 0x55C0E57: xsk_socket__create (xsk.c:601) Address 0x1ffefff378 is on thread 1's stack in frame #1, created by xsk_get_max_queues (xsk.c:318) Uninitialised value was created by a stack allocation at 0x55C04CD: xsk_get_max_queues (xsk.c:318) CC: Magnus Karlsson Fixes: 1cad07884239 ("libbpf: add support for using AF_XDP sockets") Signed-off-by: Ilya Maximets Acked-by: Andrii Nakryiko Signed-off-by: Alexei Starovoitov --- tools/lib/bpf/xsk.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c index 5007b5d4fd2c..e02025bbe36d 100644 --- a/tools/lib/bpf/xsk.c +++ b/tools/lib/bpf/xsk.c @@ -317,15 +317,14 @@ static int xsk_load_xdp_prog(struct xsk_socket *xsk) static int xsk_get_max_queues(struct xsk_socket *xsk) { - struct ethtool_channels channels; - struct ifreq ifr; + struct ethtool_channels channels = { .cmd = ETHTOOL_GCHANNELS }; + struct ifreq ifr = {}; int fd, err, ret; fd = socket(AF_INET, SOCK_DGRAM, 0); if (fd < 0) return -errno; - channels.cmd = ETHTOOL_GCHANNELS; ifr.ifr_data = (void *)&channels; strncpy(ifr.ifr_name, xsk->ifname, IFNAMSIZ - 1); ifr.ifr_name[IFNAMSIZ - 1] = '\0'; @@ -335,7 +334,7 @@ static int xsk_get_max_queues(struct xsk_socket *xsk) goto out; } - if (channels.max_combined == 0 || errno == EOPNOTSUPP) + if (err || channels.max_combined == 0) /* If the device says it has no channels, then all traffic * is sent to a single stream, so max queues = 1. */ -- cgit From c63845609c4700488e5eacd6ab4d06d5d420e5ef Mon Sep 17 00:00:00 2001 From: Rasmus Villemoes Date: Mon, 24 Jun 2019 08:34:13 +0000 Subject: can: dev: call netif_carrier_off() in register_candev() CONFIG_CAN_LEDS is deprecated. When trying to use the generic netdev trigger as suggested, there's a small inconsistency with the link property: The LED is on initially, stays on when the device is brought up, and then turns off (as expected) when the device is brought down. Make sure the LED always reflects the state of the CAN device. Signed-off-by: Rasmus Villemoes Acked-by: Willem de Bruijn Signed-off-by: Marc Kleine-Budde --- drivers/net/can/dev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index b6b93a2d93a5..483d270664cc 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -1249,6 +1249,8 @@ int register_candev(struct net_device *dev) return -EINVAL; dev->rtnl_link_ops = &can_link_ops; + netif_carrier_off(dev); + return register_netdev(dev); } EXPORT_SYMBOL_GPL(register_candev); -- cgit From d4b890aec4bea7334ca2ca56fd3b12fb48a00cd1 Mon Sep 17 00:00:00 2001 From: Nikita Yushchenko Date: Wed, 26 Jun 2019 16:08:48 +0300 Subject: can: rcar_canfd: fix possible IRQ storm on high load We have observed rcar_canfd driver entering IRQ storm under high load, with following scenario: - rcar_canfd_global_interrupt() in entered due to Rx available, - napi_schedule_prep() is called, and sets NAPIF_STATE_SCHED in state - Rx fifo interrupts are masked, - rcar_canfd_global_interrupt() is entered again, this time due to error interrupt (e.g. due to overflow), - since scheduled napi poller has not yet executed, condition for calling napi_schedule_prep() from rcar_canfd_global_interrupt() remains true, thus napi_schedule_prep() gets called and sets NAPIF_STATE_MISSED flag in state, - later, napi poller function rcar_canfd_rx_poll() gets executed, and calls napi_complete_done(), - due to NAPIF_STATE_MISSED flag in state, this call does not clear NAPIF_STATE_SCHED flag from state, - on return from napi_complete_done(), rcar_canfd_rx_poll() unmasks Rx interrutps, - Rx interrupt happens, rcar_canfd_global_interrupt() gets called and calls napi_schedule_prep(), - since NAPIF_STATE_SCHED is set in state at this time, this call returns false, - due to that false return, rcar_canfd_global_interrupt() returns without masking Rx interrupt - and this results into IRQ storm: unmasked Rx interrupt happens again and again is misprocessed in the same way. This patch fixes that scenario by unmasking Rx interrupts only when napi_complete_done() returns true, which means it has cleared NAPIF_STATE_SCHED in state. Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Signed-off-by: Nikita Yushchenko Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/rcar/rcar_canfd.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c index 05410008aa6b..de34a4b82d4a 100644 --- a/drivers/net/can/rcar/rcar_canfd.c +++ b/drivers/net/can/rcar/rcar_canfd.c @@ -1508,10 +1508,11 @@ static int rcar_canfd_rx_poll(struct napi_struct *napi, int quota) /* All packets processed */ if (num_pkts < quota) { - napi_complete_done(napi, num_pkts); - /* Enable Rx FIFO interrupts */ - rcar_canfd_set_bit(priv->base, RCANFD_RFCC(ridx), - RCANFD_RFCC_RFIE); + if (napi_complete_done(napi, num_pkts)) { + /* Enable Rx FIFO interrupts */ + rcar_canfd_set_bit(priv->base, RCANFD_RFCC(ridx), + RCANFD_RFCC_RFIE); + } } return num_pkts; } -- cgit From 375f755899b8fc21196197e02aab26257df26e85 Mon Sep 17 00:00:00 2001 From: Weitao Hou Date: Tue, 25 Jun 2019 20:50:48 +0800 Subject: can: mcp251x: add error check when wq alloc failed add error check when workqueue alloc failed, and remove redundant code to make it clear. Fixes: e0000163e30e ("can: Driver for the Microchip MCP251x SPI CAN controllers") Signed-off-by: Weitao Hou Acked-by: Willem de Bruijn Tested-by: Sean Nyekjaer Signed-off-by: Marc Kleine-Budde --- drivers/net/can/spi/mcp251x.c | 49 +++++++++++++++++++------------------------ 1 file changed, 22 insertions(+), 27 deletions(-) diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c index 44e99e3d7134..2aec934fab0c 100644 --- a/drivers/net/can/spi/mcp251x.c +++ b/drivers/net/can/spi/mcp251x.c @@ -664,17 +664,6 @@ static int mcp251x_power_enable(struct regulator *reg, int enable) return regulator_disable(reg); } -static void mcp251x_open_clean(struct net_device *net) -{ - struct mcp251x_priv *priv = netdev_priv(net); - struct spi_device *spi = priv->spi; - - free_irq(spi->irq, priv); - mcp251x_hw_sleep(spi); - mcp251x_power_enable(priv->transceiver, 0); - close_candev(net); -} - static int mcp251x_stop(struct net_device *net) { struct mcp251x_priv *priv = netdev_priv(net); @@ -940,37 +929,43 @@ static int mcp251x_open(struct net_device *net) flags | IRQF_ONESHOT, DEVICE_NAME, priv); if (ret) { dev_err(&spi->dev, "failed to acquire irq %d\n", spi->irq); - mcp251x_power_enable(priv->transceiver, 0); - close_candev(net); - goto open_unlock; + goto out_close; } priv->wq = alloc_workqueue("mcp251x_wq", WQ_FREEZABLE | WQ_MEM_RECLAIM, 0); + if (!priv->wq) { + ret = -ENOMEM; + goto out_clean; + } INIT_WORK(&priv->tx_work, mcp251x_tx_work_handler); INIT_WORK(&priv->restart_work, mcp251x_restart_work_handler); ret = mcp251x_hw_reset(spi); - if (ret) { - mcp251x_open_clean(net); - goto open_unlock; - } + if (ret) + goto out_free_wq; ret = mcp251x_setup(net, spi); - if (ret) { - mcp251x_open_clean(net); - goto open_unlock; - } + if (ret) + goto out_free_wq; ret = mcp251x_set_normal_mode(spi); - if (ret) { - mcp251x_open_clean(net); - goto open_unlock; - } + if (ret) + goto out_free_wq; can_led_event(net, CAN_LED_EVENT_OPEN); netif_wake_queue(net); + mutex_unlock(&priv->mcp_lock); -open_unlock: + return 0; + +out_free_wq: + destroy_workqueue(priv->wq); +out_clean: + free_irq(spi->irq, priv); + mcp251x_hw_sleep(spi); +out_close: + mcp251x_power_enable(priv->transceiver, 0); + close_candev(net); mutex_unlock(&priv->mcp_lock); return ret; } -- cgit From e9f2a856e102fa27715b94bcc2240f686536d29b Mon Sep 17 00:00:00 2001 From: Wen Yang Date: Sat, 6 Jul 2019 11:37:20 +0800 Subject: can: flexcan: fix an use-after-free in flexcan_setup_stop_mode() The gpr_np variable is still being used in dev_dbg() after the of_node_put() call, which may result in use-after-free. Fixes: de3578c198c6 ("can: flexcan: add self wakeup support") Signed-off-by: Wen Yang Cc: linux-stable # >= v5.0 Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index f2fe344593d5..33ce45d51e15 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -1437,10 +1437,10 @@ static int flexcan_setup_stop_mode(struct platform_device *pdev) priv = netdev_priv(dev); priv->stm.gpr = syscon_node_to_regmap(gpr_np); - of_node_put(gpr_np); if (IS_ERR(priv->stm.gpr)) { dev_dbg(&pdev->dev, "could not find gpr regmap\n"); - return PTR_ERR(priv->stm.gpr); + ret = PTR_ERR(priv->stm.gpr); + goto out_put_node; } priv->stm.req_gpr = out_val[1]; @@ -1455,7 +1455,9 @@ static int flexcan_setup_stop_mode(struct platform_device *pdev) device_set_wakeup_capable(&pdev->dev, true); - return 0; +out_put_node: + of_node_put(gpr_np); + return ret; } static const struct of_device_id flexcan_of_match[] = { -- cgit From 5f186c257fa4808bb7f14e643b9fba3e11f08a30 Mon Sep 17 00:00:00 2001 From: Joakim Zhang Date: Tue, 2 Jul 2019 01:45:41 +0000 Subject: can: flexcan: fix stop mode acknowledgment To enter stop mode, the CPU should manually assert a global Stop Mode request and check the acknowledgment asserted by FlexCAN. The CPU must only consider the FlexCAN in stop mode when both request and acknowledgment conditions are satisfied. Fixes: de3578c198c6 ("can: flexcan: add self wakeup support") Reported-by: Marc Kleine-Budde Signed-off-by: Joakim Zhang Cc: linux-stable # >= v5.0 Signed-off-by: Marc Kleine-Budde --- drivers/net/can/flexcan.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 33ce45d51e15..fcec8bcb53d6 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -400,9 +400,10 @@ static void flexcan_enable_wakeup_irq(struct flexcan_priv *priv, bool enable) priv->write(reg_mcr, ®s->mcr); } -static inline void flexcan_enter_stop_mode(struct flexcan_priv *priv) +static inline int flexcan_enter_stop_mode(struct flexcan_priv *priv) { struct flexcan_regs __iomem *regs = priv->regs; + unsigned int ackval; u32 reg_mcr; reg_mcr = priv->read(®s->mcr); @@ -412,20 +413,37 @@ static inline void flexcan_enter_stop_mode(struct flexcan_priv *priv) /* enable stop request */ regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr, 1 << priv->stm.req_bit, 1 << priv->stm.req_bit); + + /* get stop acknowledgment */ + if (regmap_read_poll_timeout(priv->stm.gpr, priv->stm.ack_gpr, + ackval, ackval & (1 << priv->stm.ack_bit), + 0, FLEXCAN_TIMEOUT_US)) + return -ETIMEDOUT; + + return 0; } -static inline void flexcan_exit_stop_mode(struct flexcan_priv *priv) +static inline int flexcan_exit_stop_mode(struct flexcan_priv *priv) { struct flexcan_regs __iomem *regs = priv->regs; + unsigned int ackval; u32 reg_mcr; /* remove stop request */ regmap_update_bits(priv->stm.gpr, priv->stm.req_gpr, 1 << priv->stm.req_bit, 0); + /* get stop acknowledgment */ + if (regmap_read_poll_timeout(priv->stm.gpr, priv->stm.ack_gpr, + ackval, !(ackval & (1 << priv->stm.ack_bit)), + 0, FLEXCAN_TIMEOUT_US)) + return -ETIMEDOUT; + reg_mcr = priv->read(®s->mcr); reg_mcr &= ~FLEXCAN_MCR_SLF_WAK; priv->write(reg_mcr, ®s->mcr); + + return 0; } static inline void flexcan_error_irq_enable(const struct flexcan_priv *priv) @@ -1614,7 +1632,9 @@ static int __maybe_unused flexcan_suspend(struct device *device) */ if (device_may_wakeup(device)) { enable_irq_wake(dev->irq); - flexcan_enter_stop_mode(priv); + err = flexcan_enter_stop_mode(priv); + if (err) + return err; } else { err = flexcan_chip_disable(priv); if (err) @@ -1664,10 +1684,13 @@ static int __maybe_unused flexcan_noirq_resume(struct device *device) { struct net_device *dev = dev_get_drvdata(device); struct flexcan_priv *priv = netdev_priv(dev); + int err; if (netif_running(dev) && device_may_wakeup(device)) { flexcan_enable_wakeup_irq(priv, false); - flexcan_exit_stop_mode(priv); + err = flexcan_exit_stop_mode(priv); + if (err) + return err; } return 0; -- cgit From fee6a8923ae0d318a7f7950c6c6c28a96cea099b Mon Sep 17 00:00:00 2001 From: Stephane Grosjean Date: Fri, 5 Jul 2019 15:32:16 +0200 Subject: can: peak_usb: fix potential double kfree_skb() When closing the CAN device while tx skbs are inflight, echo skb could be released twice. By calling close_candev() before unlinking all pending tx urbs, then the internal echo_skb[] array is fully and correctly cleared before the USB write callback and, therefore, can_get_echo_skb() are called, for each aborted URB. Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Signed-off-by: Stephane Grosjean Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c index 458154c9b482..22b9c8e6d040 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c @@ -568,16 +568,16 @@ static int peak_usb_ndo_stop(struct net_device *netdev) dev->state &= ~PCAN_USB_STATE_STARTED; netif_stop_queue(netdev); + close_candev(netdev); + + dev->can.state = CAN_STATE_STOPPED; + /* unlink all pending urbs and free used memory */ peak_usb_unlink_all_urbs(dev); if (dev->adapter->dev_stop) dev->adapter->dev_stop(dev); - close_candev(netdev); - - dev->can.state = CAN_STATE_STOPPED; - /* can set bus off now */ if (dev->adapter->dev_set_bus) { int err = dev->adapter->dev_set_bus(dev, 0); -- cgit From b7a14297f102b6e2ce6f16feffebbb9bde1e9b55 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Sat, 18 May 2019 17:35:43 +0800 Subject: can: gw: Fix error path of cgw_module_init This patch add error path for cgw_module_init to avoid possible crash if some error occurs. Fixes: c1aabdf379bc ("can-gw: add netlink based CAN routing") Signed-off-by: YueHaibing Acked-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde --- net/can/gw.c | 48 +++++++++++++++++++++++++++++++++--------------- 1 file changed, 33 insertions(+), 15 deletions(-) diff --git a/net/can/gw.c b/net/can/gw.c index 5275ddf580bc..72711053ebe6 100644 --- a/net/can/gw.c +++ b/net/can/gw.c @@ -1046,32 +1046,50 @@ static __init int cgw_module_init(void) pr_info("can: netlink gateway (rev " CAN_GW_VERSION ") max_hops=%d\n", max_hops); - register_pernet_subsys(&cangw_pernet_ops); + ret = register_pernet_subsys(&cangw_pernet_ops); + if (ret) + return ret; + + ret = -ENOMEM; cgw_cache = kmem_cache_create("can_gw", sizeof(struct cgw_job), 0, 0, NULL); - if (!cgw_cache) - return -ENOMEM; + goto out_cache_create; /* set notifier */ notifier.notifier_call = cgw_notifier; - register_netdevice_notifier(¬ifier); + ret = register_netdevice_notifier(¬ifier); + if (ret) + goto out_register_notifier; ret = rtnl_register_module(THIS_MODULE, PF_CAN, RTM_GETROUTE, NULL, cgw_dump_jobs, 0); - if (ret) { - unregister_netdevice_notifier(¬ifier); - kmem_cache_destroy(cgw_cache); - return -ENOBUFS; - } - - /* Only the first call to rtnl_register_module can fail */ - rtnl_register_module(THIS_MODULE, PF_CAN, RTM_NEWROUTE, - cgw_create_job, NULL, 0); - rtnl_register_module(THIS_MODULE, PF_CAN, RTM_DELROUTE, - cgw_remove_job, NULL, 0); + if (ret) + goto out_rtnl_register1; + + ret = rtnl_register_module(THIS_MODULE, PF_CAN, RTM_NEWROUTE, + cgw_create_job, NULL, 0); + if (ret) + goto out_rtnl_register2; + ret = rtnl_register_module(THIS_MODULE, PF_CAN, RTM_DELROUTE, + cgw_remove_job, NULL, 0); + if (ret) + goto out_rtnl_register3; return 0; + +out_rtnl_register3: + rtnl_unregister(PF_CAN, RTM_NEWROUTE); +out_rtnl_register2: + rtnl_unregister(PF_CAN, RTM_GETROUTE); +out_rtnl_register1: + unregister_netdevice_notifier(¬ifier); +out_register_notifier: + kmem_cache_destroy(cgw_cache); +out_cache_create: + unregister_pernet_subsys(&cangw_pernet_ops); + + return ret; } static __exit void cgw_module_exit(void) -- cgit From f3b5720cabafe90b8b7cffbc7b8fec1c17d4ff4b Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 24 Jul 2019 10:29:03 +0300 Subject: Input: elantech - annotate fall-through case in elantech_use_host_notify() This avoids a warning when building with -Wimplicit-fallthrough. Fixes: 883a2a80f79c ("Input: elantech - enable SMBus on new (2018+) systems") Reported-by: Stephen Rothwell Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elantech.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 73544776a9ed..04fe43440a3c 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1842,6 +1842,7 @@ static bool elantech_use_host_notify(struct psmouse *psmouse, /* SMbus implementation is stable since 2018 */ if (dmi_get_bios_year() >= 2018) return true; + /* fall through */ default: psmouse_dbg(psmouse, "Ignoring SMBus bus provider %d\n", info->bus); -- cgit From 66d7780f18eae0232827fcffeaded39a6a168236 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 8 Jul 2019 11:51:56 -0700 Subject: dma-mapping: check pfn validity in dma_common_{mmap,get_sgtable} Check that the pfn returned from arch_dma_coherent_to_pfn refers to a valid page and reject the mmap / get_sgtable requests otherwise. Based on the arm implementation of the mmap and get_sgtable methods. Signed-off-by: Christoph Hellwig Tested-by: Vignesh Raghavendra --- kernel/dma/mapping.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/kernel/dma/mapping.c b/kernel/dma/mapping.c index 1f628e7ac709..b945239621d8 100644 --- a/kernel/dma/mapping.c +++ b/kernel/dma/mapping.c @@ -116,11 +116,16 @@ int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt, int ret; if (!dev_is_dma_coherent(dev)) { + unsigned long pfn; + if (!IS_ENABLED(CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN)) return -ENXIO; - page = pfn_to_page(arch_dma_coherent_to_pfn(dev, cpu_addr, - dma_addr)); + /* If the PFN is not valid, we do not have a struct page */ + pfn = arch_dma_coherent_to_pfn(dev, cpu_addr, dma_addr); + if (!pfn_valid(pfn)) + return -ENXIO; + page = pfn_to_page(pfn); } else { page = virt_to_page(cpu_addr); } @@ -170,7 +175,11 @@ int dma_common_mmap(struct device *dev, struct vm_area_struct *vma, if (!dev_is_dma_coherent(dev)) { if (!IS_ENABLED(CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN)) return -ENXIO; + + /* If the PFN is not valid, we do not have a struct page */ pfn = arch_dma_coherent_to_pfn(dev, cpu_addr, dma_addr); + if (!pfn_valid(pfn)) + return -ENXIO; } else { pfn = page_to_pfn(virt_to_page(cpu_addr)); } -- cgit From ad3c7b18c5b362be5dbd0f2c0bcf1fd5fd659315 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 23 Jul 2019 11:33:12 +0200 Subject: arm: use swiotlb for bounce buffering on LPAE configs The DMA API requires that 32-bit DMA masks are always supported, but on arm LPAE configs they do not currently work when memory is present above 4GB. Wire up the swiotlb code like for all other architectures to provide the bounce buffering in that case. Fixes: 21e07dba9fb11 ("scsi: reduce use of block bounce buffers"). Reported-by: Roger Quadros Signed-off-by: Christoph Hellwig Tested-by: Vignesh Raghavendra --- arch/arm/include/asm/dma-mapping.h | 4 ++- arch/arm/mm/Kconfig | 5 ++++ arch/arm/mm/dma-mapping.c | 61 ++++++++++++++++++++++++++++++++++++++ arch/arm/mm/init.c | 5 ++++ 4 files changed, 74 insertions(+), 1 deletion(-) diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 7e0486ad1318..dba9355e2484 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -18,7 +18,9 @@ extern const struct dma_map_ops arm_coherent_dma_ops; static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) { - return IS_ENABLED(CONFIG_MMU) ? &arm_dma_ops : NULL; + if (IS_ENABLED(CONFIG_MMU) && !IS_ENABLED(CONFIG_ARM_LPAE)) + return &arm_dma_ops; + return NULL; } #ifdef __arch_page_to_dma diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 820b60a50125..c54cd7ed90ba 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -663,6 +663,11 @@ config ARM_LPAE depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \ !CPU_32v4 && !CPU_32v3 select PHYS_ADDR_T_64BIT + select SWIOTLB + select ARCH_HAS_DMA_COHERENT_TO_PFN + select ARCH_HAS_DMA_MMAP_PGPROT + select ARCH_HAS_SYNC_DMA_FOR_DEVICE + select ARCH_HAS_SYNC_DMA_FOR_CPU help Say Y if you have an ARMv7 processor supporting the LPAE page table format and you would like to access memory beyond the diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4789c60a86e3..6774b03aa405 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -1125,6 +1126,19 @@ int arm_dma_supported(struct device *dev, u64 mask) static const struct dma_map_ops *arm_get_dma_map_ops(bool coherent) { + /* + * When CONFIG_ARM_LPAE is set, physical address can extend above + * 32-bits, which then can't be addressed by devices that only support + * 32-bit DMA. + * Use the generic dma-direct / swiotlb ops code in that case, as that + * handles bounce buffering for us. + * + * Note: this checks CONFIG_ARM_LPAE instead of CONFIG_SWIOTLB as the + * latter is also selected by the Xen code, but that code for now relies + * on non-NULL dev_dma_ops. To be cleaned up later. + */ + if (IS_ENABLED(CONFIG_ARM_LPAE)) + return NULL; return coherent ? &arm_coherent_dma_ops : &arm_dma_ops; } @@ -2329,6 +2343,9 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, const struct dma_map_ops *dma_ops; dev->archdata.dma_coherent = coherent; +#ifdef CONFIG_SWIOTLB + dev->dma_coherent = coherent; +#endif /* * Don't override the dma_ops if they have already been set. Ideally @@ -2363,3 +2380,47 @@ void arch_teardown_dma_ops(struct device *dev) /* Let arch_setup_dma_ops() start again from scratch upon re-probe */ set_dma_ops(dev, NULL); } + +#ifdef CONFIG_SWIOTLB +void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, + size_t size, enum dma_data_direction dir) +{ + __dma_page_cpu_to_dev(phys_to_page(paddr), paddr & (PAGE_SIZE - 1), + size, dir); +} + +void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, + size_t size, enum dma_data_direction dir) +{ + __dma_page_dev_to_cpu(phys_to_page(paddr), paddr & (PAGE_SIZE - 1), + size, dir); +} + +long arch_dma_coherent_to_pfn(struct device *dev, void *cpu_addr, + dma_addr_t dma_addr) +{ + return dma_to_pfn(dev, dma_addr); +} + +pgprot_t arch_dma_mmap_pgprot(struct device *dev, pgprot_t prot, + unsigned long attrs) +{ + if (!dev_is_dma_coherent(dev)) + return __get_dma_pgprot(attrs, prot); + return prot; +} + +void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle, + gfp_t gfp, unsigned long attrs) +{ + return __dma_alloc(dev, size, dma_handle, gfp, + __get_dma_pgprot(attrs, PAGE_KERNEL), false, + attrs, __builtin_return_address(0)); +} + +void arch_dma_free(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t dma_handle, unsigned long attrs) +{ + __arm_dma_free(dev, size, cpu_addr, dma_handle, attrs, false); +} +#endif /* CONFIG_SWIOTLB */ diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 4920a206dce9..16d373d587c4 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -463,6 +464,10 @@ static void __init free_highpages(void) */ void __init mem_init(void) { +#ifdef CONFIG_ARM_LPAE + swiotlb_init(1); +#endif + set_max_mapnr(pfn_to_page(max_pfn) - mem_map); /* this will put all unused low memory onto the freelists */ -- cgit From 40aa5383e393d72f6aa3943a4e7b1aae25a1e43b Mon Sep 17 00:00:00 2001 From: Ricard Wanderlof Date: Wed, 24 Jul 2019 11:38:44 +0200 Subject: ASoC: Fail card instantiation if DAI format setup fails If the DAI format setup fails, there is no valid communication format between CPU and CODEC, so fail card instantiation, rather than continue with a card that will most likely not function properly. Signed-off-by: Ricard Wanderlof Link: https://lore.kernel.org/r/alpine.DEB.2.20.1907241132350.6338@lnxricardw1.se.axis.com Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index c0a774d0a5ff..1486fb2eb921 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1511,8 +1511,11 @@ static int soc_probe_link_dais(struct snd_soc_card *card, } } - if (dai_link->dai_fmt) - snd_soc_runtime_set_dai_fmt(rtd, dai_link->dai_fmt); + if (dai_link->dai_fmt) { + ret = snd_soc_runtime_set_dai_fmt(rtd, dai_link->dai_fmt); + if (ret) + return ret; + } ret = soc_post_component_init(rtd, dai_link->name); if (ret) -- cgit From a853c0a0b013af3fee0f028cff3c44e275ce9abd Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 11 Jul 2019 19:35:17 +0800 Subject: regulator: lp87565: Fix probe failure for "ti,lp87565" The "ti,lp87565" compatible string is still in of_lp87565_match_table, but current code will return -EINVAL because lp87565->dev_type is unknown. This was working in earlier kernel versions, so fix it. Fixes: 7ee63bd74750 ("regulator: lp87565: Add 4-phase lp87561 regulator support") Signed-off-by: Axel Lin Link: https://lore.kernel.org/r/20190711113517.26077-1-axel.lin@ingics.com Signed-off-by: Mark Brown --- drivers/regulator/lp87565-regulator.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/regulator/lp87565-regulator.c b/drivers/regulator/lp87565-regulator.c index 5d067f7c2116..0c440c5e2832 100644 --- a/drivers/regulator/lp87565-regulator.c +++ b/drivers/regulator/lp87565-regulator.c @@ -163,7 +163,7 @@ static int lp87565_regulator_probe(struct platform_device *pdev) struct lp87565 *lp87565 = dev_get_drvdata(pdev->dev.parent); struct regulator_config config = { }; struct regulator_dev *rdev; - int i, min_idx = LP87565_BUCK_0, max_idx = LP87565_BUCK_3; + int i, min_idx, max_idx; platform_set_drvdata(pdev, lp87565); @@ -182,9 +182,9 @@ static int lp87565_regulator_probe(struct platform_device *pdev) max_idx = LP87565_BUCK_3210; break; default: - dev_err(lp87565->dev, "Invalid lp config %d\n", - lp87565->dev_type); - return -EINVAL; + min_idx = LP87565_BUCK_0; + max_idx = LP87565_BUCK_3; + break; } for (i = min_idx; i <= max_idx; i++) { -- cgit From 2e05ec4834f9bb7fe3575e4c48acebebfa1e24d9 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Wed, 24 Jul 2019 23:15:54 +0900 Subject: selftests: mlxsw: Fix typo in qos_mc_aware.sh This patch fixes some spelling typo in qos_mc_aware.sh Signed-off-by: Masanari Iida Acked-by: Randy Dunlap Reviewed-by: Ido Schimmel Signed-off-by: Shuah Khan --- tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh index 71231ad2dbfb..47315fe48d5a 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_mc_aware.sh @@ -262,7 +262,7 @@ test_mc_aware() stop_traffic - log_test "UC performace under MC overload" + log_test "UC performance under MC overload" echo "UC-only throughput $(humanize $ucth1)" echo "UC+MC throughput $(humanize $ucth2)" @@ -316,7 +316,7 @@ test_uc_aware() stop_traffic - log_test "MC performace under UC overload" + log_test "MC performance under UC overload" echo " ingress UC throughput $(humanize ${uc_ir})" echo " egress UC throughput $(humanize ${uc_er})" echo " sent $attempts BC ARPs, got $passes responses" -- cgit From 8d8bef50365847134b51c1ec46786bc2873e4e47 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Wed, 3 Jul 2019 12:29:31 +0200 Subject: spi: bcm2835: Fix 3-wire mode if DMA is enabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 6935224da248 ("spi: bcm2835: enable support of 3-wire mode") added 3-wire support to the BCM2835 SPI driver by setting the REN bit (Read Enable) in the CS register when receiving data. The REN bit puts the transmitter in high-impedance state. The driver recognizes that data is to be received by checking whether the rx_buf of a transfer is non-NULL. Commit 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") subsequently broke 3-wire support because it set the SPI_MASTER_MUST_RX flag which causes spi_map_msg() to replace rx_buf with a dummy buffer if it is NULL. As a result, rx_buf is *always* non-NULL if DMA is enabled. Reinstate 3-wire support by not only checking whether rx_buf is non-NULL, but also checking that it is not the dummy buffer. Fixes: 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") Reported-by: Nuno Sá Signed-off-by: Lukas Wunner Cc: stable@vger.kernel.org # v4.2+ Cc: Martin Sperl Acked-by: Stefan Wahren Link: https://lore.kernel.org/r/328318841455e505370ef8ecad97b646c033dc8a.1562148527.git.lukas@wunner.de Signed-off-by: Mark Brown --- drivers/spi/spi-bcm2835.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 6f243a90c844..840b1b8ff3dc 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -834,7 +834,8 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr, bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv); /* handle all the 3-wire mode */ - if ((spi->mode & SPI_3WIRE) && (tfr->rx_buf)) + if (spi->mode & SPI_3WIRE && tfr->rx_buf && + tfr->rx_buf != ctlr->dummy_rx) cs |= BCM2835_SPI_CS_REN; else cs &= ~BCM2835_SPI_CS_REN; -- cgit From 6a053953739d23694474a5f9c81d1a30093da81a Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Tue, 23 Jul 2019 09:57:25 +0300 Subject: IB/mlx5: Fix unreg_umr to ignore the mkey state Fix unreg_umr to ignore the mkey state and do not fail if was freed. This prevents a case that a user space application already changed the mkey state to free and then the UMR operation will fail leaving the mkey in an inappropriate state. Link: https://lore.kernel.org/r/20190723065733.4899-3-leon@kernel.org Cc: # 3.19 Fixes: 968e78dd9644 ("IB/mlx5: Enhance UMR support to allow partial page table update") Signed-off-by: Yishai Hadas Reviewed-by: Artemy Kovalyov Signed-off-by: Leon Romanovsky Reviewed-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/mlx5_ib.h | 1 + drivers/infiniband/hw/mlx5/mr.c | 4 ++-- drivers/infiniband/hw/mlx5/qp.c | 12 ++++++++---- 3 files changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h b/drivers/infiniband/hw/mlx5/mlx5_ib.h index c482f19958b3..f6a53455bf8b 100644 --- a/drivers/infiniband/hw/mlx5/mlx5_ib.h +++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h @@ -481,6 +481,7 @@ struct mlx5_umr_wr { u64 length; int access_flags; u32 mkey; + u8 ignore_free_state:1; }; static inline const struct mlx5_umr_wr *umr_wr(const struct ib_send_wr *wr) diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index 20ece6e0b2fc..266edaf8029d 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -1372,10 +1372,10 @@ static int unreg_umr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr) if (mdev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR) return 0; - umrwr.wr.send_flags = MLX5_IB_SEND_UMR_DISABLE_MR | - MLX5_IB_SEND_UMR_FAIL_IF_FREE; + umrwr.wr.send_flags = MLX5_IB_SEND_UMR_DISABLE_MR; umrwr.wr.opcode = MLX5_IB_WR_UMR; umrwr.mkey = mr->mmkey.key; + umrwr.ignore_free_state = 1; return mlx5_ib_post_send_wait(dev, &umrwr); } diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 2a97619ed603..615cc6771516 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -4295,10 +4295,14 @@ static int set_reg_umr_segment(struct mlx5_ib_dev *dev, memset(umr, 0, sizeof(*umr)); - if (wr->send_flags & MLX5_IB_SEND_UMR_FAIL_IF_FREE) - umr->flags = MLX5_UMR_CHECK_FREE; /* fail if free */ - else - umr->flags = MLX5_UMR_CHECK_NOT_FREE; /* fail if not free */ + if (!umrwr->ignore_free_state) { + if (wr->send_flags & MLX5_IB_SEND_UMR_FAIL_IF_FREE) + /* fail if free */ + umr->flags = MLX5_UMR_CHECK_FREE; + else + /* fail if not free */ + umr->flags = MLX5_UMR_CHECK_NOT_FREE; + } umr->xlt_octowords = cpu_to_be16(get_xlt_octo(umrwr->xlt_size)); if (wr->send_flags & MLX5_IB_SEND_UMR_UPDATE_XLT) { -- cgit From afd1417404fba6dbfa6c0a8e5763bd348da682e4 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Tue, 23 Jul 2019 09:57:26 +0300 Subject: IB/mlx5: Use direct mkey destroy command upon UMR unreg failure Use a direct firmware command to destroy the mkey in case the unreg UMR operation has failed. This prevents a case that a mkey will leak out from the cache post a failure to be destroyed by a UMR WR. In case the MR cache limit didn't reach a call to add another entry to the cache instead of the destroyed one is issued. In addition, replaced a warn message to WARN_ON() as this flow is fatal and can't happen unless some bug around. Link: https://lore.kernel.org/r/20190723065733.4899-4-leon@kernel.org Cc: # 4.10 Fixes: 49780d42dfc9 ("IB/mlx5: Expose MR cache for mlx5_ib") Signed-off-by: Yishai Hadas Reviewed-by: Artemy Kovalyov Signed-off-by: Leon Romanovsky Reviewed-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/mr.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index 266edaf8029d..b83361aebf28 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -545,13 +545,16 @@ void mlx5_mr_cache_free(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr) return; c = order2idx(dev, mr->order); - if (c < 0 || c >= MAX_MR_CACHE_ENTRIES) { - mlx5_ib_warn(dev, "order %d, cache index %d\n", mr->order, c); - return; - } + WARN_ON(c < 0 || c >= MAX_MR_CACHE_ENTRIES); - if (unreg_umr(dev, mr)) + if (unreg_umr(dev, mr)) { + mr->allocated_from_cache = false; + destroy_mkey(dev, mr); + ent = &cache->ent[c]; + if (ent->cur < ent->limit) + queue_work(cache->wq, &ent->work); return; + } ent = &cache->ent[c]; spin_lock_irq(&ent->lock); -- cgit From 9ec4483a3f0f71a228a5933bc040441322bfb090 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Tue, 23 Jul 2019 09:57:27 +0300 Subject: IB/mlx5: Move MRs to a kernel PD when freeing them to the MR cache Fix unreg_umr to move the MR to a kernel owned PD (i.e. the UMR PD) which can't be accessed by userspace. This ensures that nothing can continue to access the MR once it has been placed in the kernels cache for reuse. MRs in the cache continue to have their HW state, including DMA tables, present. Even though the MR has been invalidated, changing the PD provides an additional layer of protection against use of the MR. Link: https://lore.kernel.org/r/20190723065733.4899-5-leon@kernel.org Cc: # 3.10 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Yishai Hadas Reviewed-by: Artemy Kovalyov Signed-off-by: Leon Romanovsky Reviewed-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/mr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index b83361aebf28..7274a9b9df58 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -1375,8 +1375,10 @@ static int unreg_umr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr) if (mdev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR) return 0; - umrwr.wr.send_flags = MLX5_IB_SEND_UMR_DISABLE_MR; + umrwr.wr.send_flags = MLX5_IB_SEND_UMR_DISABLE_MR | + MLX5_IB_SEND_UMR_UPDATE_PD_ACCESS; umrwr.wr.opcode = MLX5_IB_WR_UMR; + umrwr.pd = dev->umrc.pd; umrwr.mkey = mr->mmkey.key; umrwr.ignore_free_state = 1; -- cgit From b9332dad987018745a0c0bb718d12dacfa760489 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Tue, 23 Jul 2019 09:57:28 +0300 Subject: IB/mlx5: Fix clean_mr() to work in the expected order Any dma map underlying the MR should only be freed once the MR is fenced at the hardware. As of the above we first destroy the MKEY and just after that can safely call to dma_unmap_single(). Link: https://lore.kernel.org/r/20190723065733.4899-6-leon@kernel.org Cc: # 4.3 Fixes: 8a187ee52b04 ("IB/mlx5: Support the new memory registration API") Signed-off-by: Yishai Hadas Reviewed-by: Artemy Kovalyov Signed-off-by: Leon Romanovsky Reviewed-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/mr.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index 7274a9b9df58..2c77456f359f 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -1582,10 +1582,10 @@ static void clean_mr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr) mr->sig = NULL; } - mlx5_free_priv_descs(mr); - - if (!allocated_from_cache) + if (!allocated_from_cache) { destroy_mkey(dev, mr); + mlx5_free_priv_descs(mr); + } } static void dereg_mr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr) -- cgit From 527d37e9e575bc0e9024de9b499385e7bb31f1ad Mon Sep 17 00:00:00 2001 From: Joe Lawrence Date: Wed, 24 Jul 2019 16:05:58 -0400 Subject: selftests/livepatch: add test skip handling Add a skip() message function that stops the test, logs an explanation, and sets the "skip" return code (4). Before loading a livepatch self-test kernel module, first verify that we've built and installed it by running a 'modprobe --dry-run'. This should catch a few environment issues, including !CONFIG_LIVEPATCH and !CONFIG_TEST_LIVEPATCH. In these cases, exit gracefully with the new skip() function. Reported-by: Jiri Benc Suggested-by: Shuah Khan Reviewed-by: Petr Mladek Signed-off-by: Joe Lawrence Signed-off-by: Shuah Khan --- tools/testing/selftests/livepatch/functions.sh | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/tools/testing/selftests/livepatch/functions.sh b/tools/testing/selftests/livepatch/functions.sh index 30195449c63c..edcfeace4655 100644 --- a/tools/testing/selftests/livepatch/functions.sh +++ b/tools/testing/selftests/livepatch/functions.sh @@ -13,6 +13,14 @@ function log() { echo "$1" > /dev/kmsg } +# skip(msg) - testing can't proceed +# msg - explanation +function skip() { + log "SKIP: $1" + echo "SKIP: $1" >&2 + exit 4 +} + # die(msg) - game over, man # msg - dying words function die() { @@ -43,6 +51,12 @@ function loop_until() { done } +function assert_mod() { + local mod="$1" + + modprobe --dry-run "$mod" &>/dev/null +} + function is_livepatch_mod() { local mod="$1" @@ -75,6 +89,9 @@ function __load_mod() { function load_mod() { local mod="$1"; shift + assert_mod "$mod" || + skip "unable to load module ${mod}, verify CONFIG_TEST_LIVEPATCH=m and run self-tests as root" + is_livepatch_mod "$mod" && die "use load_lp() to load the livepatch module $mod" @@ -88,6 +105,9 @@ function load_mod() { function load_lp_nowait() { local mod="$1"; shift + assert_mod "$mod" || + skip "unable to load module ${mod}, verify CONFIG_TEST_LIVEPATCH=m and run self-tests as root" + is_livepatch_mod "$mod" || die "module $mod is not a livepatch" -- cgit From 71be7b0e7d4069822c89146daed800686db8f147 Mon Sep 17 00:00:00 2001 From: Asmaa Mnebhi Date: Wed, 24 Jul 2019 15:32:57 -0400 Subject: Fix uninitialized variable in ipmb_dev_int.c ret at line 112 of ipmb_dev_int.c is uninitialized which results in a warning during build regressions. This warning was found by build regression/improvement testing for v5.3-rc1. Reported-by: build regression/improvement testing for v5.3-rc1. Fixes: 51bd6f291583 ("Add support for IPMB driver") Signed-off-by: Asmaa Mnebhi Message-Id: <571dbb67cf58411d567953d9fb3739eb4789238b.1563996586.git.Asmaa@mellanox.com> Signed-off-by: Corey Minyard --- drivers/char/ipmi/ipmb_dev_int.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/ipmi/ipmb_dev_int.c b/drivers/char/ipmi/ipmb_dev_int.c index 57204335c5f5..285e0b8f9a97 100644 --- a/drivers/char/ipmi/ipmb_dev_int.c +++ b/drivers/char/ipmi/ipmb_dev_int.c @@ -76,7 +76,7 @@ static ssize_t ipmb_read(struct file *file, char __user *buf, size_t count, struct ipmb_dev *ipmb_dev = to_ipmb_dev(file); struct ipmb_request_elem *queue_elem; struct ipmb_msg msg; - ssize_t ret; + ssize_t ret = 0; memset(&msg, 0, sizeof(msg)); -- cgit From c7148c03db80e44da7197ec5f558f630333c5cad Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 24 Jul 2019 13:56:37 -0700 Subject: net/ipv4: cleanup error condition testing Cleanup testing for error condition. Signed-off-by: Pavel Machek Signed-off-by: David S. Miller --- net/ipv4/inet_fragment.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c index d666756be5f1..a999451345f9 100644 --- a/net/ipv4/inet_fragment.c +++ b/net/ipv4/inet_fragment.c @@ -331,7 +331,7 @@ struct inet_frag_queue *inet_frag_find(struct fqdir *fqdir, void *key) prev = rhashtable_lookup(&fqdir->rhashtable, key, fqdir->f->rhash_params); if (!prev) fq = inet_frag_create(fqdir, key, &prev); - if (prev && !IS_ERR(prev)) { + if (!IS_ERR_OR_NULL(prev)) { fq = prev; if (!refcount_inc_not_zero(&fq->refcnt)) fq = NULL; -- cgit From 3bc817d665ac6d9de89f59df522ad86f5b5dfc03 Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Wed, 24 Jul 2019 20:00:42 +0800 Subject: ip6_gre: reload ipv6h in prepare_ip6gre_xmit_ipv6 Since ip6_tnl_parse_tlv_enc_lim() can call pskb_may_pull() which may change skb->data, so we need to re-load ipv6h at the right place. Fixes: 898b29798e36 ("ip6_gre: Refactor ip6gre xmit codes") Cc: William Tu Signed-off-by: Haishuang Yan Acked-by: William Tu Signed-off-by: David S. Miller --- net/ipv6/ip6_gre.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index c2049c72f3e5..dd2d0b963260 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -660,12 +660,13 @@ static int prepare_ip6gre_xmit_ipv6(struct sk_buff *skb, struct flowi6 *fl6, __u8 *dsfield, int *encap_limit) { - struct ipv6hdr *ipv6h = ipv6_hdr(skb); + struct ipv6hdr *ipv6h; struct ip6_tnl *t = netdev_priv(dev); __u16 offset; offset = ip6_tnl_parse_tlv_enc_lim(skb, skb_network_header(skb)); /* ip6_tnl_parse_tlv_enc_lim() might have reallocated skb->head */ + ipv6h = ipv6_hdr(skb); if (offset > 0) { struct ipv6_tlv_tnl_enc_lim *tel; -- cgit From c7fa7f567cab6532be285a5df104617d80bce245 Mon Sep 17 00:00:00 2001 From: Arseny Solokha Date: Wed, 24 Jul 2019 20:31:39 +0700 Subject: net: phylink: don't start and stop SGMII PHYs in SFP modules twice SFP modules connected using the SGMII interface have their own PHYs which are handled by the struct phylink's phydev field. On the other hand, for the modules connected using 1000Base-X interface that field is not set. Since commit ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network devices and sfp cages") phylink_start() ends up setting the phydev field using the sfp-bus infrastructure, which eventually calls phy_start() on it, and then calling phy_start() again on the same phydev from phylink_start() itself. Similar call sequence holds for phylink_stop(), only in the reverse order. This results in WARNs during network interface bringup and shutdown when a copper SFP module is connected, as phy_start() and phy_stop() are called twice in a row for the same phy_device: % ip link set up dev eth0 ------------[ cut here ]------------ called from state UP WARNING: CPU: 1 PID: 155 at drivers/net/phy/phy.c:895 phy_start+0x74/0xc0 Modules linked in: CPU: 1 PID: 155 Comm: backend Not tainted 5.2.0+ #1 NIP: c0227bf0 LR: c0227bf0 CTR: c004d224 REGS: df547720 TRAP: 0700 Not tainted (5.2.0+) MSR: 00029000 CR: 24002822 XER: 00000000 GPR00: c0227bf0 df5477d8 df5d7080 00000014 df9d2370 df9d5ac4 1f4eb000 00000001 GPR08: c061fe58 00000000 00000000 df5477d8 0000003c 100c8768 00000000 00000000 GPR16: df486a00 c046f1c8 c046eea0 00000000 c046e904 c0239604 db68449c 00000000 GPR24: e9083204 00000000 00000001 db684460 e9083404 00000000 db6dce00 db6dcc00 NIP [c0227bf0] phy_start+0x74/0xc0 LR [c0227bf0] phy_start+0x74/0xc0 Call Trace: [df5477d8] [c0227bf0] phy_start+0x74/0xc0 (unreliable) [df5477e8] [c023cad0] startup_gfar+0x398/0x3f4 [df547828] [c023cf08] gfar_enet_open+0x364/0x374 [df547898] [c029d870] __dev_open+0xe4/0x140 [df5478c8] [c029db70] __dev_change_flags+0xf0/0x188 [df5478f8] [c029dc28] dev_change_flags+0x20/0x54 [df547918] [c02ae304] do_setlink+0x310/0x818 [df547a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0 [df547c28] [c02b222c] rtnl_newlink+0x48/0x68 [df547c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c [df547c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0 [df547cd8] [c02cba3c] netlink_unicast+0x114/0x19c [df547d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0 [df547d58] [c027b668] sock_sendmsg_nosec+0x20/0x40 [df547d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc [df547e98] [c027df7c] __sys_sendmsg+0x68/0x84 [df547ef8] [c027e430] sys_socketcall+0x1a0/0x204 [df547f38] [c000d1d8] ret_from_syscall+0x0/0x38 --- interrupt: c01 at 0xfd4e030 LR = 0xfd4e010 Instruction dump: 813f0188 38800000 2b890005 419d0014 3d40c046 5529103a 394aa208 7c8a482e 3c60c046 3863a1b8 4cc63182 4be009a1 <0fe00000> 48000030 3c60c046 3863a1d0 ---[ end trace d4c095aeaf6ea998 ]--- and % ip link set down dev eth0 ------------[ cut here ]------------ called from state HALTED WARNING: CPU: 1 PID: 184 at drivers/net/phy/phy.c:858 phy_stop+0x3c/0x88 <...> Call Trace: [df581788] [c0228450] phy_stop+0x3c/0x88 (unreliable) [df581798] [c022d548] sfp_sm_phy_detach+0x1c/0x44 [df5817a8] [c022e8cc] sfp_sm_event+0x4b0/0x87c [df581848] [c022f04c] sfp_upstream_stop+0x34/0x44 [df581858] [c0225608] phylink_stop+0x7c/0xe4 [df581868] [c023c57c] stop_gfar+0x7c/0x94 [df581888] [c023c5b8] gfar_close+0x24/0x94 [df5818a8] [c0298688] __dev_close_many+0xdc/0xf8 [df5818c8] [c029db58] __dev_change_flags+0xd8/0x188 [df5818f8] [c029dc28] dev_change_flags+0x20/0x54 [df581918] [c02ae304] do_setlink+0x310/0x818 [df581a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0 [df581c28] [c02b222c] rtnl_newlink+0x48/0x68 [df581c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c [df581c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0 [df581cd8] [c02cba3c] netlink_unicast+0x114/0x19c [df581d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0 [df581d58] [c027b668] sock_sendmsg_nosec+0x20/0x40 [df581d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc [df581e98] [c027df7c] __sys_sendmsg+0x68/0x84 [df581ef8] [c027e430] sys_socketcall+0x1a0/0x204 [df581f38] [c000d1d8] ret_from_syscall+0x0/0x38 <...> ---[ end trace d4c095aeaf6ea999 ]--- SFP modules with the 1000Base-X interface are not affected. Place explicit calls to phy_start() and phy_stop() before enabling or after disabling an attached SFP module, where phydev is not yet set (or is already unset), so they will be made only from the inside of sfp-bus, if needed. Fixes: 217962615662 ("net: phy: warn if phy_start is called from invalid state") Signed-off-by: Arseny Solokha Acked-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/phylink.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index 5d0af041b8f9..b45862465c4d 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -990,10 +990,10 @@ void phylink_start(struct phylink *pl) } if (pl->link_an_mode == MLO_AN_FIXED && pl->get_fixed_state) mod_timer(&pl->link_poll, jiffies + HZ); - if (pl->sfp_bus) - sfp_upstream_start(pl->sfp_bus); if (pl->phydev) phy_start(pl->phydev); + if (pl->sfp_bus) + sfp_upstream_start(pl->sfp_bus); } EXPORT_SYMBOL_GPL(phylink_start); @@ -1010,10 +1010,10 @@ void phylink_stop(struct phylink *pl) { ASSERT_RTNL(); - if (pl->phydev) - phy_stop(pl->phydev); if (pl->sfp_bus) sfp_upstream_stop(pl->sfp_bus); + if (pl->phydev) + phy_stop(pl->phydev); del_timer_sync(&pl->link_poll); if (pl->link_irq) { free_irq(pl->link_irq, pl); -- cgit From f972037e71246c5e0916eef835174d58ffc517e4 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Wed, 24 Jul 2019 17:32:57 +0200 Subject: net: phy: mscc: initialize stats array The memory allocated for the stats array may contain arbitrary data. Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.") Fixes: 00d70d8e0e78 ("net: phy: mscc: add support for VSC8574 PHY") Fixes: a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY") Fixes: f76178dc5218 ("net: phy: mscc: add ethtool statistics counters") Signed-off-by: Andreas Schwab Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/mscc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c index 28676af97b42..645d354ffb48 100644 --- a/drivers/net/phy/mscc.c +++ b/drivers/net/phy/mscc.c @@ -2226,8 +2226,8 @@ static int vsc8514_probe(struct phy_device *phydev) vsc8531->supp_led_modes = VSC85XX_SUPP_LED_MODES; vsc8531->hw_stats = vsc85xx_hw_stats; vsc8531->nstats = ARRAY_SIZE(vsc85xx_hw_stats); - vsc8531->stats = devm_kmalloc_array(&phydev->mdio.dev, vsc8531->nstats, - sizeof(u64), GFP_KERNEL); + vsc8531->stats = devm_kcalloc(&phydev->mdio.dev, vsc8531->nstats, + sizeof(u64), GFP_KERNEL); if (!vsc8531->stats) return -ENOMEM; @@ -2251,8 +2251,8 @@ static int vsc8574_probe(struct phy_device *phydev) vsc8531->supp_led_modes = VSC8584_SUPP_LED_MODES; vsc8531->hw_stats = vsc8584_hw_stats; vsc8531->nstats = ARRAY_SIZE(vsc8584_hw_stats); - vsc8531->stats = devm_kmalloc_array(&phydev->mdio.dev, vsc8531->nstats, - sizeof(u64), GFP_KERNEL); + vsc8531->stats = devm_kcalloc(&phydev->mdio.dev, vsc8531->nstats, + sizeof(u64), GFP_KERNEL); if (!vsc8531->stats) return -ENOMEM; @@ -2281,8 +2281,8 @@ static int vsc8584_probe(struct phy_device *phydev) vsc8531->supp_led_modes = VSC8584_SUPP_LED_MODES; vsc8531->hw_stats = vsc8584_hw_stats; vsc8531->nstats = ARRAY_SIZE(vsc8584_hw_stats); - vsc8531->stats = devm_kmalloc_array(&phydev->mdio.dev, vsc8531->nstats, - sizeof(u64), GFP_KERNEL); + vsc8531->stats = devm_kcalloc(&phydev->mdio.dev, vsc8531->nstats, + sizeof(u64), GFP_KERNEL); if (!vsc8531->stats) return -ENOMEM; @@ -2311,8 +2311,8 @@ static int vsc85xx_probe(struct phy_device *phydev) vsc8531->supp_led_modes = VSC85XX_SUPP_LED_MODES; vsc8531->hw_stats = vsc85xx_hw_stats; vsc8531->nstats = ARRAY_SIZE(vsc85xx_hw_stats); - vsc8531->stats = devm_kmalloc_array(&phydev->mdio.dev, vsc8531->nstats, - sizeof(u64), GFP_KERNEL); + vsc8531->stats = devm_kcalloc(&phydev->mdio.dev, vsc8531->nstats, + sizeof(u64), GFP_KERNEL); if (!vsc8531->stats) return -ENOMEM; -- cgit From 47b79bbb19e1cfc615823ccaac258cdd2c810c47 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 24 Jul 2019 11:02:48 -0700 Subject: net/tls: add myself as a co-maintainer I've been spending quite a bit of time fixing and preventing bit rot in the core TLS code. TLS seems to only be growing in importance, I'd like to help ensuring the quality of our implementation. Signed-off-by: Jakub Kicinski Acked-by: Alexei Starovoitov Acked-by: Daniel Borkmann Acked-by: John Fastabend Acked-by: Simon Horman Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 783569e3c4b4..3ff2e6ab3cf4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11282,6 +11282,7 @@ M: Aviad Yehezkel M: Dave Watson M: John Fastabend M: Daniel Borkmann +M: Jakub Kicinski L: netdev@vger.kernel.org S: Maintained F: net/tls/* -- cgit From 260637903f47f20c5918bb5c1eea52b2a28ea863 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 Jul 2019 17:00:01 +0200 Subject: ovs: datapath: hide clang frame-overflow warnings Some functions in the datapath code are factored out so that each one has a stack frame smaller than 1024 bytes with gcc. However, when compiling with clang, the functions are inlined more aggressively and combined again so we get net/openvswitch/datapath.c:1124:12: error: stack frame size of 1528 bytes in function 'ovs_flow_cmd_set' [-Werror,-Wframe-larger-than=] Marking both get_flow_actions() and ovs_nla_init_match_and_action() as 'noinline_for_stack' gives us the same behavior that we see with gcc, and no warning. Note that this does not mean we actually use less stack, as the functions call each other, and we still get three copies of the large 'struct sw_flow_key' type on the stack. The comment tells us that this was previously considered safe, presumably since the netlink parsing functions are called with a known backchain that does not also use a lot of stack space. Fixes: 9cc9a5cb176c ("datapath: Avoid using stack larger than 1024.") Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- net/openvswitch/datapath.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c index 892287d06c17..d01410e52097 100644 --- a/net/openvswitch/datapath.c +++ b/net/openvswitch/datapath.c @@ -1047,7 +1047,7 @@ error: } /* Factor out action copy to avoid "Wframe-larger-than=1024" warning. */ -static struct sw_flow_actions *get_flow_actions(struct net *net, +static noinline_for_stack struct sw_flow_actions *get_flow_actions(struct net *net, const struct nlattr *a, const struct sw_flow_key *key, const struct sw_flow_mask *mask, @@ -1081,12 +1081,13 @@ static struct sw_flow_actions *get_flow_actions(struct net *net, * we should not to return match object with dangling reference * to mask. * */ -static int ovs_nla_init_match_and_action(struct net *net, - struct sw_flow_match *match, - struct sw_flow_key *key, - struct nlattr **a, - struct sw_flow_actions **acts, - bool log) +static noinline_for_stack int +ovs_nla_init_match_and_action(struct net *net, + struct sw_flow_match *match, + struct sw_flow_key *key, + struct nlattr **a, + struct sw_flow_actions **acts, + bool log) { struct sw_flow_mask mask; int error = 0; -- cgit From 4638faac032756f7eab5524be7be56bee77e426b Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Mon, 22 Jul 2019 20:41:22 -0700 Subject: netrom: hold sock when setting skb->destructor sock_efree() releases the sock refcnt, if we don't hold this refcnt when setting skb->destructor to it, the refcnt would not be balanced. This leads to several bug reports from syzbot. I have checked other users of sock_efree(), all of them hold the sock refcnt. Fixes: c8c8218ec5af ("netrom: fix a memory leak in nr_rx_frame()") Reported-and-tested-by: Reported-and-tested-by: Reported-and-tested-by: Reported-and-tested-by: Cc: Ralf Baechle Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/netrom/af_netrom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index 96740d389377..c4f54ad2b98a 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -967,6 +967,7 @@ int nr_rx_frame(struct sk_buff *skb, struct net_device *dev) window = skb->data[20]; + sock_hold(make); skb->sk = make; skb->destructor = sock_efree; make->sk_state = TCP_ESTABLISHED; -- cgit From e3cacb73e626d885b8cf24103fed0ae26518e3c4 Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Wed, 24 Jul 2019 17:39:47 -0700 Subject: xtensa: fix build for cores with coprocessors Assembly entry/return abstraction change didn't add asmmacro.h include statement to coprocessor.S, resulting in references to undefined macros abi_entry and abi_ret on cores that define XTENSA_HAVE_COPROCESSORS. Fix that by including asm/asmmacro.h from the coprocessor.S. Signed-off-by: Max Filippov --- arch/xtensa/kernel/coprocessor.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/xtensa/kernel/coprocessor.S b/arch/xtensa/kernel/coprocessor.S index 60c220020054..80828b95a51f 100644 --- a/arch/xtensa/kernel/coprocessor.S +++ b/arch/xtensa/kernel/coprocessor.S @@ -14,6 +14,7 @@ #include #include +#include #include #include #include -- cgit From cb81572e8cb50c5fb98b0b962cdfe48fff71fd37 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Tue, 23 Jul 2019 15:27:52 +0200 Subject: netfilter: nf_tables: Make nft_meta expression more robust nft_meta_get_eval()'s tendency to bail out setting NFT_BREAK verdict in situations where required data is missing leads to unexpected behaviour with inverted checks like so: | meta iifname != eth0 accept This rule will never match if there is no input interface (or it is not known) which is not intuitive and, what's worse, breaks consistency of iptables-nft with iptables-legacy. Fix this by falling back to placing a value in dreg which never matches (avoiding accidental matches), i.e. zero for interface index and an empty string for interface name. Signed-off-by: Phil Sutter Signed-off-by: Pablo Neira Ayuso --- net/bridge/netfilter/nft_meta_bridge.c | 6 +----- net/netfilter/nft_meta.c | 16 ++++------------ 2 files changed, 5 insertions(+), 17 deletions(-) diff --git a/net/bridge/netfilter/nft_meta_bridge.c b/net/bridge/netfilter/nft_meta_bridge.c index bed66f536b34..a98dec2cf0cf 100644 --- a/net/bridge/netfilter/nft_meta_bridge.c +++ b/net/bridge/netfilter/nft_meta_bridge.c @@ -30,13 +30,9 @@ static void nft_meta_bridge_get_eval(const struct nft_expr *expr, switch (priv->key) { case NFT_META_BRI_IIFNAME: br_dev = nft_meta_get_bridge(in); - if (!br_dev) - goto err; break; case NFT_META_BRI_OIFNAME: br_dev = nft_meta_get_bridge(out); - if (!br_dev) - goto err; break; case NFT_META_BRI_IIFPVID: { u16 p_pvid; @@ -64,7 +60,7 @@ static void nft_meta_bridge_get_eval(const struct nft_expr *expr, goto out; } - strncpy((char *)dest, br_dev->name, IFNAMSIZ); + strncpy((char *)dest, br_dev ? br_dev->name : "", IFNAMSIZ); return; out: return nft_meta_get_eval(expr, regs, pkt); diff --git a/net/netfilter/nft_meta.c b/net/netfilter/nft_meta.c index f1b1d948c07b..f69afb9ff3cb 100644 --- a/net/netfilter/nft_meta.c +++ b/net/netfilter/nft_meta.c @@ -60,24 +60,16 @@ void nft_meta_get_eval(const struct nft_expr *expr, *dest = skb->mark; break; case NFT_META_IIF: - if (in == NULL) - goto err; - *dest = in->ifindex; + *dest = in ? in->ifindex : 0; break; case NFT_META_OIF: - if (out == NULL) - goto err; - *dest = out->ifindex; + *dest = out ? out->ifindex : 0; break; case NFT_META_IIFNAME: - if (in == NULL) - goto err; - strncpy((char *)dest, in->name, IFNAMSIZ); + strncpy((char *)dest, in ? in->name : "", IFNAMSIZ); break; case NFT_META_OIFNAME: - if (out == NULL) - goto err; - strncpy((char *)dest, out->name, IFNAMSIZ); + strncpy((char *)dest, out ? out->name : "", IFNAMSIZ); break; case NFT_META_IIFTYPE: if (in == NULL) -- cgit From 67d86835840a533ce868c42a7f05507e66ba95f0 Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Tue, 23 Jul 2019 15:27:53 +0200 Subject: netfilter: nft_meta_bridge: Eliminate 'out' label The label is used just once and the code it points at is not reused, no point in keeping it. Signed-off-by: Phil Sutter Signed-off-by: Pablo Neira Ayuso --- net/bridge/netfilter/nft_meta_bridge.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/bridge/netfilter/nft_meta_bridge.c b/net/bridge/netfilter/nft_meta_bridge.c index a98dec2cf0cf..1804e867f715 100644 --- a/net/bridge/netfilter/nft_meta_bridge.c +++ b/net/bridge/netfilter/nft_meta_bridge.c @@ -57,13 +57,11 @@ static void nft_meta_bridge_get_eval(const struct nft_expr *expr, return; } default: - goto out; + return nft_meta_get_eval(expr, regs, pkt); } strncpy((char *)dest, br_dev ? br_dev->name : "", IFNAMSIZ); return; -out: - return nft_meta_get_eval(expr, regs, pkt); err: regs->verdict.code = NFT_BREAK; } -- cgit From dbc4f989c878fe101fb7920e9609e8ec44e097cd Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Tue, 16 Jul 2019 08:24:36 +0800 Subject: Staging: fbtft: Fix probing of gpio descriptor MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Conversion to use gpio descriptors broke all gpio lookups as devm_gpiod_get_index was converted to use dev->driver->name for the gpio name lookup. Fix this by using the name param. In addition gpiod_get post-fixes the -gpios to the name so that shouldn't be included in the call. However this then breaks the of_find_property call to see if the gpio entry exists as all fbtft treats all gpios as optional. So use devm_gpiod_get_index_optional instead which achieves the same thing and is simpler. Nishad confirmed the changes where only ever compile tested. Fixes: c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor interface") Reviewed-by: Nicolas Saenz Julienne Tested-by: Nicolas Saenz Julienne Tested-by: Jan Sebastian Götte Signed-off-by: Phil Reid Cc: stable Link: https://lore.kernel.org/r/1563236677-5045-2-git-send-email-preid@electromag.com.au Signed-off-by: Greg Kroah-Hartman --- drivers/staging/fbtft/fbtft-core.c | 39 ++++++++++++++++++-------------------- 1 file changed, 18 insertions(+), 21 deletions(-) diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c index 7cbc1bdd2d8a..b963cccdc3f6 100644 --- a/drivers/staging/fbtft/fbtft-core.c +++ b/drivers/staging/fbtft/fbtft-core.c @@ -76,21 +76,18 @@ static int fbtft_request_one_gpio(struct fbtft_par *par, struct gpio_desc **gpiop) { struct device *dev = par->info->device; - struct device_node *node = dev->of_node; int ret = 0; - if (of_find_property(node, name, NULL)) { - *gpiop = devm_gpiod_get_index(dev, dev->driver->name, index, - GPIOD_OUT_HIGH); - if (IS_ERR(*gpiop)) { - ret = PTR_ERR(*gpiop); - dev_err(dev, - "Failed to request %s GPIO:%d\n", name, ret); - return ret; - } - fbtft_par_dbg(DEBUG_REQUEST_GPIOS, par, "%s: '%s' GPIO\n", - __func__, name); + *gpiop = devm_gpiod_get_index_optional(dev, name, index, + GPIOD_OUT_HIGH); + if (IS_ERR(*gpiop)) { + ret = PTR_ERR(*gpiop); + dev_err(dev, + "Failed to request %s GPIO: %d\n", name, ret); + return ret; } + fbtft_par_dbg(DEBUG_REQUEST_GPIOS, par, "%s: '%s' GPIO\n", + __func__, name); return ret; } @@ -103,34 +100,34 @@ static int fbtft_request_gpios_dt(struct fbtft_par *par) if (!par->info->device->of_node) return -EINVAL; - ret = fbtft_request_one_gpio(par, "reset-gpios", 0, &par->gpio.reset); + ret = fbtft_request_one_gpio(par, "reset", 0, &par->gpio.reset); if (ret) return ret; - ret = fbtft_request_one_gpio(par, "dc-gpios", 0, &par->gpio.dc); + ret = fbtft_request_one_gpio(par, "dc", 0, &par->gpio.dc); if (ret) return ret; - ret = fbtft_request_one_gpio(par, "rd-gpios", 0, &par->gpio.rd); + ret = fbtft_request_one_gpio(par, "rd", 0, &par->gpio.rd); if (ret) return ret; - ret = fbtft_request_one_gpio(par, "wr-gpios", 0, &par->gpio.wr); + ret = fbtft_request_one_gpio(par, "wr", 0, &par->gpio.wr); if (ret) return ret; - ret = fbtft_request_one_gpio(par, "cs-gpios", 0, &par->gpio.cs); + ret = fbtft_request_one_gpio(par, "cs", 0, &par->gpio.cs); if (ret) return ret; - ret = fbtft_request_one_gpio(par, "latch-gpios", 0, &par->gpio.latch); + ret = fbtft_request_one_gpio(par, "latch", 0, &par->gpio.latch); if (ret) return ret; for (i = 0; i < 16; i++) { - ret = fbtft_request_one_gpio(par, "db-gpios", i, + ret = fbtft_request_one_gpio(par, "db", i, &par->gpio.db[i]); if (ret) return ret; - ret = fbtft_request_one_gpio(par, "led-gpios", i, + ret = fbtft_request_one_gpio(par, "led", i, &par->gpio.led[i]); if (ret) return ret; - ret = fbtft_request_one_gpio(par, "aux-gpios", i, + ret = fbtft_request_one_gpio(par, "aux", i, &par->gpio.aux[i]); if (ret) return ret; -- cgit From b918d1c2706619cb0712a61cc8c05148b68b24b2 Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Tue, 16 Jul 2019 08:24:37 +0800 Subject: Staging: fbtft: Fix reset assertion when using gpio descriptor MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Typically gpiod_set_value calls would assert the reset line and then release it using the symantics of: gpiod_set_value(par->gpio.reset, 0); ... delay gpiod_set_value(par->gpio.reset, 1); And the gpio binding would specify the polarity. Prior to conversion to gpiod calls the polarity in the DT was ignored and assumed to be active low. Fix it so that DT polarity is respected. Fixes: c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor interface") Reviewed-by: Nicolas Saenz Julienne Tested-by: Nicolas Saenz Julienne Tested-by: Jan Sebastian Götte Signed-off-by: Phil Reid Cc: stable Link: https://lore.kernel.org/r/1563236677-5045-3-git-send-email-preid@electromag.com.au Signed-off-by: Greg Kroah-Hartman --- drivers/staging/fbtft/fbtft-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c index b963cccdc3f6..c3179cc847f8 100644 --- a/drivers/staging/fbtft/fbtft-core.c +++ b/drivers/staging/fbtft/fbtft-core.c @@ -231,9 +231,9 @@ static void fbtft_reset(struct fbtft_par *par) if (!par->gpio.reset) return; fbtft_par_dbg(DEBUG_RESET, par, "%s()\n", __func__); - gpiod_set_value_cansleep(par->gpio.reset, 0); - usleep_range(20, 40); gpiod_set_value_cansleep(par->gpio.reset, 1); + usleep_range(20, 40); + gpiod_set_value_cansleep(par->gpio.reset, 0); msleep(120); } -- cgit From 66665bb9979246729562a09fcdbb101c83127989 Mon Sep 17 00:00:00 2001 From: Ivan Bornyakov Date: Wed, 10 Jul 2019 23:45:18 +0300 Subject: staging: gasket: apex: fix copy-paste typo In sysfs_show() case-branches ATTR_KERNEL_HIB_PAGE_TABLE_SIZE and ATTR_KERNEL_HIB_SIMPLE_PAGE_TABLE_SIZE do the same. It looks like copy-paste mistake. Signed-off-by: Ivan Bornyakov Cc: stable Link: https://lore.kernel.org/r/20190710204518.16814-1-brnkv.i1@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/gasket/apex_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/gasket/apex_driver.c b/drivers/staging/gasket/apex_driver.c index 2be45ee9d061..464648ee2036 100644 --- a/drivers/staging/gasket/apex_driver.c +++ b/drivers/staging/gasket/apex_driver.c @@ -532,7 +532,7 @@ static ssize_t sysfs_show(struct device *device, struct device_attribute *attr, break; case ATTR_KERNEL_HIB_SIMPLE_PAGE_TABLE_SIZE: ret = scnprintf(buf, PAGE_SIZE, "%u\n", - gasket_page_table_num_entries( + gasket_page_table_num_simple_entries( gasket_dev->page_table[0])); break; case ATTR_KERNEL_HIB_NUM_ACTIVE_PAGES: -- cgit From fb2b055b7e6e44efda737c7c92f46c0868bb04e5 Mon Sep 17 00:00:00 2001 From: Adham Abozaeid Date: Mon, 22 Jul 2019 21:38:44 +0000 Subject: staging: wilc1000: flush the workqueue before deinit the host Before deinitializing the host interface, the workqueue should be flushed to handle any pending deferred work Signed-off-by: Adham Abozaeid Cc: stable Link: https://lore.kernel.org/r/20190722213837.21952-1-adham.abozaeid@microchip.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c index d72fdd333050..736eedef23b6 100644 --- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c +++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c @@ -1969,6 +1969,7 @@ void wilc_deinit_host_int(struct net_device *net) priv->p2p_listen_state = false; + flush_workqueue(vif->wilc->hif_workqueue); mutex_destroy(&priv->scan_req_lock); ret = wilc_deinit(vif); -- cgit From 610504301235e6d7c5a8505d1d3401bed0403d05 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 21 Jul 2019 19:08:24 +0200 Subject: staging: unisys: visornic: Update the description of 'poll_for_irq()' Commit e99e88a9d2b06 ("treewide: setup_timer() -> timer_setup()") has updated the parameters of 'poll_for_irq()' but not the comment above the function. Update the comment and fix a typo. s/visronic/visornic/ Signed-off-by: Christophe JAILLET Reviewed-By: Enrico Weigelt Link: https://lore.kernel.org/r/20190721170824.3412-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman --- drivers/staging/unisys/visornic/visornic_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/unisys/visornic/visornic_main.c b/drivers/staging/unisys/visornic/visornic_main.c index 9d4f1dab0968..40dd573e73c3 100644 --- a/drivers/staging/unisys/visornic/visornic_main.c +++ b/drivers/staging/unisys/visornic/visornic_main.c @@ -1750,7 +1750,8 @@ static int visornic_poll(struct napi_struct *napi, int budget) } /* poll_for_irq - checks the status of the response queue - * @v: Void pointer to the visronic devdata struct. + * @t: pointer to the 'struct timer_list' from which we can retrieve the + * the visornic devdata struct. * * Main function of the vnic_incoming thread. Periodically check the response * queue and drain it if needed. -- cgit From 92e3e884887c0d278042fbbb6f6c9b41d6addb71 Mon Sep 17 00:00:00 2001 From: Jan Sebastian Götte Date: Wed, 17 Jul 2019 23:41:37 +0900 Subject: Staging: fbtft: Fix GPIO handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit c440eee1a7a1 ("Staging: fbtft: Switch to the gpio descriptor interface") breaks GPIO handling. In several places, checks to only set a GPIO if it was configured ended up backwards. I have tested this fix. The fixed driver works with a ili9486 display connected to a raspberry pi via SPI. Fixes: c440eee1a7a1d ("Staging: fbtft: Switch to the gpio descriptor interface") Tested-by: Jan Sebastian Götte Reviewed-by: Nicolas Saenz Julienne Signed-off-by: Jan Sebastian Götte Link: https://lore.kernel.org/r/75ada52f-afa1-08bc-d0ce-966fc1110e70@jaseg.net Signed-off-by: Greg Kroah-Hartman --- drivers/staging/fbtft/fb_bd663474.c | 2 +- drivers/staging/fbtft/fb_ili9163.c | 2 +- drivers/staging/fbtft/fb_ili9325.c | 2 +- drivers/staging/fbtft/fb_s6d1121.c | 2 +- drivers/staging/fbtft/fb_ssd1289.c | 2 +- drivers/staging/fbtft/fb_ssd1331.c | 4 ++-- drivers/staging/fbtft/fb_upd161704.c | 2 +- drivers/staging/fbtft/fbtft-bus.c | 2 +- drivers/staging/fbtft/fbtft-core.c | 4 ++-- 9 files changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/staging/fbtft/fb_bd663474.c b/drivers/staging/fbtft/fb_bd663474.c index b6c6d66e4eb1..e2c7646588f8 100644 --- a/drivers/staging/fbtft/fb_bd663474.c +++ b/drivers/staging/fbtft/fb_bd663474.c @@ -24,7 +24,7 @@ static int init_display(struct fbtft_par *par) { - if (!par->gpio.cs) + if (par->gpio.cs) gpiod_set_value(par->gpio.cs, 0); /* Activate chip */ par->fbtftops.reset(par); diff --git a/drivers/staging/fbtft/fb_ili9163.c b/drivers/staging/fbtft/fb_ili9163.c index d609a2b67db9..fd32376700e2 100644 --- a/drivers/staging/fbtft/fb_ili9163.c +++ b/drivers/staging/fbtft/fb_ili9163.c @@ -77,7 +77,7 @@ static int init_display(struct fbtft_par *par) { par->fbtftops.reset(par); - if (!par->gpio.cs) + if (par->gpio.cs) gpiod_set_value(par->gpio.cs, 0); /* Activate chip */ write_reg(par, MIPI_DCS_SOFT_RESET); /* software reset */ diff --git a/drivers/staging/fbtft/fb_ili9325.c b/drivers/staging/fbtft/fb_ili9325.c index b090e7ab6fdd..85e54a10ed72 100644 --- a/drivers/staging/fbtft/fb_ili9325.c +++ b/drivers/staging/fbtft/fb_ili9325.c @@ -85,7 +85,7 @@ static int init_display(struct fbtft_par *par) { par->fbtftops.reset(par); - if (!par->gpio.cs) + if (par->gpio.cs) gpiod_set_value(par->gpio.cs, 0); /* Activate chip */ bt &= 0x07; diff --git a/drivers/staging/fbtft/fb_s6d1121.c b/drivers/staging/fbtft/fb_s6d1121.c index b3d0701880fe..5a129b1352cc 100644 --- a/drivers/staging/fbtft/fb_s6d1121.c +++ b/drivers/staging/fbtft/fb_s6d1121.c @@ -29,7 +29,7 @@ static int init_display(struct fbtft_par *par) { par->fbtftops.reset(par); - if (!par->gpio.cs) + if (par->gpio.cs) gpiod_set_value(par->gpio.cs, 0); /* Activate chip */ /* Initialization sequence from Lib_UTFT */ diff --git a/drivers/staging/fbtft/fb_ssd1289.c b/drivers/staging/fbtft/fb_ssd1289.c index bbf75f795234..88a5b6925901 100644 --- a/drivers/staging/fbtft/fb_ssd1289.c +++ b/drivers/staging/fbtft/fb_ssd1289.c @@ -28,7 +28,7 @@ static int init_display(struct fbtft_par *par) { par->fbtftops.reset(par); - if (!par->gpio.cs) + if (par->gpio.cs) gpiod_set_value(par->gpio.cs, 0); /* Activate chip */ write_reg(par, 0x00, 0x0001); diff --git a/drivers/staging/fbtft/fb_ssd1331.c b/drivers/staging/fbtft/fb_ssd1331.c index 4cfe9f8535d0..37622c9462aa 100644 --- a/drivers/staging/fbtft/fb_ssd1331.c +++ b/drivers/staging/fbtft/fb_ssd1331.c @@ -81,7 +81,7 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...) va_start(args, len); *buf = (u8)va_arg(args, unsigned int); - if (!par->gpio.dc) + if (par->gpio.dc) gpiod_set_value(par->gpio.dc, 0); ret = par->fbtftops.write(par, par->buf, sizeof(u8)); if (ret < 0) { @@ -104,7 +104,7 @@ static void write_reg8_bus8(struct fbtft_par *par, int len, ...) return; } } - if (!par->gpio.dc) + if (par->gpio.dc) gpiod_set_value(par->gpio.dc, 1); va_end(args); } diff --git a/drivers/staging/fbtft/fb_upd161704.c b/drivers/staging/fbtft/fb_upd161704.c index 564a38e34440..c77832ae5e5b 100644 --- a/drivers/staging/fbtft/fb_upd161704.c +++ b/drivers/staging/fbtft/fb_upd161704.c @@ -26,7 +26,7 @@ static int init_display(struct fbtft_par *par) { par->fbtftops.reset(par); - if (!par->gpio.cs) + if (par->gpio.cs) gpiod_set_value(par->gpio.cs, 0); /* Activate chip */ /* Initialization sequence from Lib_UTFT */ diff --git a/drivers/staging/fbtft/fbtft-bus.c b/drivers/staging/fbtft/fbtft-bus.c index 2ea814d0dca5..63c65dd67b17 100644 --- a/drivers/staging/fbtft/fbtft-bus.c +++ b/drivers/staging/fbtft/fbtft-bus.c @@ -135,7 +135,7 @@ int fbtft_write_vmem16_bus8(struct fbtft_par *par, size_t offset, size_t len) remain = len / 2; vmem16 = (u16 *)(par->info->screen_buffer + offset); - if (!par->gpio.dc) + if (par->gpio.dc) gpiod_set_value(par->gpio.dc, 1); /* non buffered write */ diff --git a/drivers/staging/fbtft/fbtft-core.c b/drivers/staging/fbtft/fbtft-core.c index c3179cc847f8..cf5700a2ea66 100644 --- a/drivers/staging/fbtft/fbtft-core.c +++ b/drivers/staging/fbtft/fbtft-core.c @@ -918,7 +918,7 @@ static int fbtft_init_display_dt(struct fbtft_par *par) return -EINVAL; par->fbtftops.reset(par); - if (!par->gpio.cs) + if (par->gpio.cs) gpiod_set_value(par->gpio.cs, 0); /* Activate chip */ while (p) { @@ -1009,7 +1009,7 @@ int fbtft_init_display(struct fbtft_par *par) } par->fbtftops.reset(par); - if (!par->gpio.cs) + if (par->gpio.cs) gpiod_set_value(par->gpio.cs, 0); /* Activate chip */ i = 0; -- cgit From 25f8c834e2a6871920cc1ca113f02fb301d007c3 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 12 Jul 2019 11:37:17 -0700 Subject: Input: synaptics - enable RMI mode for HP Spectre X360 The 2016 kabylake HP Spectre X360 (model number 13-w013dx) works much better with psmouse.synaptics_intertouch=1 kernel parameter, so let's enable RMI4 mode automatically. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204115 Reported-by: Nate Graham Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index b1956ed4c0dd..46bbe99d6511 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -182,6 +182,7 @@ static const char * const smbus_pnp_ids[] = { "LEN2055", /* E580 */ "SYN3052", /* HP EliteBook 840 G4 */ "SYN3221", /* HP 15-ay000 */ + "SYN323d", /* HP Spectre X360 13-w013dx */ NULL }; -- cgit From 8f9e86ee795971eabbf372e6d804d6b8578287a7 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Mon, 1 Jul 2019 19:55:19 +0900 Subject: staging: android: ion: Bail out upon SIGKILL when allocating memory. syzbot found that a thread can stall for minutes inside ion_system_heap_allocate() after that thread was killed by SIGKILL [1]. Let's check for SIGKILL before doing memory allocation. [1] https://syzkaller.appspot.com/bug?id=a0e3436829698d5824231251fad9d8e998f94f5e Signed-off-by: Tetsuo Handa Cc: stable Reported-by: syzbot Acked-by: Laura Abbott Acked-by: Sumit Semwal Link: https://lore.kernel.org/r/d088f188-5f32-d8fc-b9a0-0b404f7501cc@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/ion/ion_page_pool.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/staging/android/ion/ion_page_pool.c b/drivers/staging/android/ion/ion_page_pool.c index fd4995fb676e..f85ec5b16b65 100644 --- a/drivers/staging/android/ion/ion_page_pool.c +++ b/drivers/staging/android/ion/ion_page_pool.c @@ -8,11 +8,14 @@ #include #include #include +#include #include "ion.h" static inline struct page *ion_page_pool_alloc_pages(struct ion_page_pool *pool) { + if (fatal_signal_pending(current)) + return NULL; return alloc_pages(pool->gfp_mask, pool->order); } -- cgit From 2a6fc3cb5cb68597f1072bfeef28d2ca02310220 Mon Sep 17 00:00:00 2001 From: Dmitry Osipenko Date: Fri, 5 Jul 2019 18:11:39 +0300 Subject: drm/tegra: Fix gpiod_get_from_of_node() regression That function now returns ERR_PTR instead of NULL if "hpd-gpio" is not present in device-tree. The offending patch missed to adapt the Tegra's DRM driver for the API change. Fixes: 025bf37725f1 ("gpio: Fix return value mismatch of function gpiod_get_from_of_node()") Signed-off-by: Dmitry Osipenko Acked-by: Jon Hunter Signed-off-by: Thierry Reding --- drivers/gpu/drm/tegra/output.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/tegra/output.c b/drivers/gpu/drm/tegra/output.c index 274cb955e2e1..bdcaa4c7168c 100644 --- a/drivers/gpu/drm/tegra/output.c +++ b/drivers/gpu/drm/tegra/output.c @@ -126,8 +126,12 @@ int tegra_output_probe(struct tegra_output *output) "nvidia,hpd-gpio", 0, GPIOD_IN, "HDMI hotplug detect"); - if (IS_ERR(output->hpd_gpio)) - return PTR_ERR(output->hpd_gpio); + if (IS_ERR(output->hpd_gpio)) { + if (PTR_ERR(output->hpd_gpio) != -ENOENT) + return PTR_ERR(output->hpd_gpio); + + output->hpd_gpio = NULL; + } if (output->hpd_gpio) { err = gpiod_to_irq(output->hpd_gpio); -- cgit From 296e3a2aad09d328f22e54655c3d736033fe1ae8 Mon Sep 17 00:00:00 2001 From: Moni Shoua Date: Tue, 23 Jul 2019 09:57:30 +0300 Subject: IB/mlx5: Prevent concurrent MR updates during invalidation The device requires that memory registration work requests that update the address translation table of a MR will be fenced if posted together. This scenario can happen when address ranges are invalidated by the mmu in separate concurrent calls to the invalidation callback. We prefer to block concurrent address updates for a single MR over fencing since making the decision if a WQE needs fencing will be more expensive and fencing all WQEs is a too radical choice. Further, it isn't clear that this code can even run safely concurrently, so a lock is a safer choice. Fixes: b4cfe447d47b ("IB/mlx5: Implement on demand paging by adding support for MMU notifiers") Link: https://lore.kernel.org/r/20190723065733.4899-8-leon@kernel.org Signed-off-by: Moni Shoua Reviewed-by: Artemy Kovalyov Signed-off-by: Leon Romanovsky Reviewed-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/odp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx5/odp.c b/drivers/infiniband/hw/mlx5/odp.c index 36ba901cc9a5..81da82050d05 100644 --- a/drivers/infiniband/hw/mlx5/odp.c +++ b/drivers/infiniband/hw/mlx5/odp.c @@ -246,7 +246,7 @@ void mlx5_ib_invalidate_range(struct ib_umem_odp *umem_odp, unsigned long start, * overwrite the same MTTs. Concurent invalidations might race us, * but they will write 0s as well, so no difference in the end result. */ - + mutex_lock(&umem_odp->umem_mutex); for (addr = start; addr < end; addr += BIT(umem_odp->page_shift)) { idx = (addr - ib_umem_start(umem_odp)) >> umem_odp->page_shift; /* @@ -278,6 +278,7 @@ void mlx5_ib_invalidate_range(struct ib_umem_odp *umem_odp, unsigned long start, idx - blk_start_idx + 1, 0, MLX5_IB_UPD_XLT_ZAP | MLX5_IB_UPD_XLT_ATOMIC); + mutex_unlock(&umem_odp->umem_mutex); /* * We are now sure that the device will not access the * memory. We can safely unmap it, and mark it as dirty if -- cgit From a379d1ce32f1c97b19d68cffbd195e025dbb9d43 Mon Sep 17 00:00:00 2001 From: Parav Pandit Date: Tue, 23 Jul 2019 09:57:32 +0300 Subject: IB/core: Fix querying total rdma stats rdma_counter_init() may fail for a device. In such case while calculating total sum, ignore NULL hstats. This fixes below observed call trace. BUG: kernel NULL pointer dereference, address: 00000000000000a0 PGD 8000001009b30067 P4D 8000001009b30067 PUD 10549c9067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 55 PID: 20887 Comm: cat Kdump: loaded Not tainted 5.2.0-rc6-jdc+ #13 RIP: 0010:rdma_counter_get_hwstat_value+0xf2/0x150 [ib_core] Call Trace: show_hw_stats+0x5e/0x130 [ib_core] dev_attr_show+0x15/0x50 sysfs_kf_seq_show+0xc6/0x1a0 seq_read+0x132/0x370 vfs_read+0x89/0x140 ksys_read+0x5c/0xd0 do_syscall_64+0x5a/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read") Link: https://lore.kernel.org/r/20190723065733.4899-10-leon@kernel.org Signed-off-by: Parav Pandit Reviewed-by: Mark Zhang Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/counters.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/infiniband/core/counters.c b/drivers/infiniband/core/counters.c index 01faef7bc061..c7d445635476 100644 --- a/drivers/infiniband/core/counters.c +++ b/drivers/infiniband/core/counters.c @@ -393,6 +393,9 @@ u64 rdma_counter_get_hwstat_value(struct ib_device *dev, u8 port, u32 index) u64 sum; port_counter = &dev->port_data[port].port_counter; + if (!port_counter->hstats) + return 0; + sum = get_running_counters_hwstat_sum(dev, port, index); sum += port_counter->hstats->value[index]; -- cgit From d191152f43a5869d7dbb50dd2a7a4b3b8b71f1f0 Mon Sep 17 00:00:00 2001 From: Parav Pandit Date: Tue, 23 Jul 2019 09:57:33 +0300 Subject: IB/counters: Always initialize the port counter object Port counter objects should be initialized even if alloc_stats is unsupported, otherwise QP bind operations in user space can trigger a NULL pointer deference if they try to bind QP on RDMA device which doesn't support counters. Fixes: f34a55e497e8 ("RDMA/core: Get sum value of all counters when perform a sysfs stat read") Link: https://lore.kernel.org/r/20190723065733.4899-11-leon@kernel.org Signed-off-by: Parav Pandit Reviewed-by: Mark Zhang Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/counters.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/core/counters.c b/drivers/infiniband/core/counters.c index c7d445635476..45d5164e9574 100644 --- a/drivers/infiniband/core/counters.c +++ b/drivers/infiniband/core/counters.c @@ -597,7 +597,7 @@ void rdma_counter_init(struct ib_device *dev) struct rdma_port_counter *port_counter; u32 port; - if (!dev->ops.alloc_hw_stats || !dev->port_data) + if (!dev->port_data) return; rdma_for_each_port(dev, port) { @@ -605,6 +605,9 @@ void rdma_counter_init(struct ib_device *dev) port_counter->mode.mode = RDMA_COUNTER_MODE_NONE; mutex_init(&port_counter->lock); + if (!dev->ops.alloc_hw_stats) + continue; + port_counter->hstats = dev->ops.alloc_hw_stats(dev, port); if (!port_counter->hstats) goto fail; @@ -627,9 +630,6 @@ void rdma_counter_release(struct ib_device *dev) struct rdma_port_counter *port_counter; u32 port; - if (!dev->ops.alloc_hw_stats) - return; - rdma_for_each_port(dev, port) { port_counter = &dev->port_data[port].port_counter; kfree(port_counter->hstats); -- cgit From b7165bd0d6cbb93732559be6ea8774653b204480 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Tue, 23 Jul 2019 09:57:29 +0300 Subject: IB/mlx5: Fix RSS Toeplitz setup to be aligned with the HW specification The specification for the Toeplitz function doesn't require to set the key explicitly to be symmetric. In case a symmetric functionality is required a symmetric key can be simply used. Wrongly forcing the algorithm to symmetric causes the wrong packet distribution and a performance degradation. Link: https://lore.kernel.org/r/20190723065733.4899-7-leon@kernel.org Cc: # 4.7 Fixes: 28d6137008b2 ("IB/mlx5: Add RSS QP support") Signed-off-by: Yishai Hadas Reviewed-by: Alex Vainman Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe --- drivers/infiniband/hw/mlx5/qp.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 615cc6771516..379328b2598f 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -1713,7 +1713,6 @@ static int create_rss_raw_qp_tir(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp, } MLX5_SET(tirc, tirc, rx_hash_fn, MLX5_RX_HASH_FN_TOEPLITZ); - MLX5_SET(tirc, tirc, rx_hash_symmetric, 1); memcpy(rss_key, ucmd.rx_hash_key, len); break; } -- cgit From edbfe83def34153a05439ecb3352ae0bb65024de Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 29 Jun 2019 11:41:36 +0200 Subject: platform/x86: pcengines-apuv2: Fix softdep statement Only first MODULE_SOFTDEP statement is handled per module. Multiple dependencies must be expressed in a single statement. Signed-off-by: Jean Delvare Cc: "Enrico Weigelt, metux IT consult" Cc: Darren Hart Cc: Andy Shevchenko [andy: massaged commit message] Signed-off-by: Andy Shevchenko --- drivers/platform/x86/pcengines-apuv2.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/platform/x86/pcengines-apuv2.c b/drivers/platform/x86/pcengines-apuv2.c index b0d3110ae378..96b499c6929a 100644 --- a/drivers/platform/x86/pcengines-apuv2.c +++ b/drivers/platform/x86/pcengines-apuv2.c @@ -255,6 +255,4 @@ MODULE_DESCRIPTION("PC Engines APUv2/APUv3 board GPIO/LED/keys driver"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(dmi, apu_gpio_dmi_table); MODULE_ALIAS("platform:pcengines-apuv2"); -MODULE_SOFTDEP("pre: platform:" AMD_FCH_GPIO_DRIVER_NAME); -MODULE_SOFTDEP("pre: platform:leds-gpio"); -MODULE_SOFTDEP("pre: platform:gpio_keys_polled"); +MODULE_SOFTDEP("pre: platform:" AMD_FCH_GPIO_DRIVER_NAME " platform:leds-gpio platform:gpio_keys_polled"); -- cgit From 8732d85a69a0411f16a4b78df8fdc7b09c50a849 Mon Sep 17 00:00:00 2001 From: Mattias Jacobsson <2pi@mok.nu> Date: Fri, 19 Jul 2019 19:51:45 +0200 Subject: platform/x86: wmi: add missing struct parameter description Add a description for the context parameter in the struct wmi_device_id. Reported-by: kbuild test robot Fixes: a48e23385fcf ("platform/x86: wmi: add context pointer field to struct wmi_device_id") Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Signed-off-by: Andy Shevchenko --- include/linux/mod_devicetable.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index b2c1648f7e5d..5714fd35a83c 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -814,6 +814,7 @@ struct tee_client_device_id { /** * struct wmi_device_id - WMI device identifier * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba + * @context: pointer to driver specific data */ struct wmi_device_id { const char guid_string[UUID_STRING_LEN+1]; -- cgit From cb8ffde5694ae5fffb456eae932aac442aa3a207 Mon Sep 17 00:00:00 2001 From: Andrii Nakryiko Date: Wed, 24 Jul 2019 14:47:53 -0700 Subject: libbpf: silence GCC8 warning about string truncation Despite a proper NULL-termination after strncpy(..., ..., IFNAMSIZ - 1), GCC8 still complains about *expected* string truncation: xsk.c:330:2: error: 'strncpy' output may be truncated copying 15 bytes from a string of length 15 [-Werror=stringop-truncation] strncpy(ifr.ifr_name, xsk->ifname, IFNAMSIZ - 1); This patch gets rid of the issue altogether by using memcpy instead. There is no performance regression, as strncpy will still copy and fill all of the bytes anyway. v1->v2: - rebase against bpf tree. Cc: Magnus Karlsson Signed-off-by: Andrii Nakryiko Acked-by: Magnus Karlsson Acked-by: Song Liu Signed-off-by: Alexei Starovoitov --- tools/lib/bpf/xsk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/lib/bpf/xsk.c b/tools/lib/bpf/xsk.c index e02025bbe36d..680e63066cf3 100644 --- a/tools/lib/bpf/xsk.c +++ b/tools/lib/bpf/xsk.c @@ -326,7 +326,7 @@ static int xsk_get_max_queues(struct xsk_socket *xsk) return -errno; ifr.ifr_data = (void *)&channels; - strncpy(ifr.ifr_name, xsk->ifname, IFNAMSIZ - 1); + memcpy(ifr.ifr_name, xsk->ifname, IFNAMSIZ - 1); ifr.ifr_name[IFNAMSIZ - 1] = '\0'; err = ioctl(fd, SIOCETHTOOL, &ifr); if (err && errno != EOPNOTSUPP) { @@ -516,7 +516,7 @@ int xsk_socket__create(struct xsk_socket **xsk_ptr, const char *ifname, err = -errno; goto out_socket; } - strncpy(xsk->ifname, ifname, IFNAMSIZ - 1); + memcpy(xsk->ifname, ifname, IFNAMSIZ - 1); xsk->ifname[IFNAMSIZ - 1] = '\0'; err = xsk_set_xdp_socket_config(&xsk->config, usr_config); -- cgit From 6acf5d76ab685e921771abbbae5353929f3ebbe6 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Tue, 23 Jul 2019 11:20:22 +0200 Subject: Platform: OLPC: add SPI MODULE_DEVICE_TABLE The SPI bus creates a device with the modalias of "xo1.75-ec". This fixes XO-1.75 EC driver autoloading Fixes: 0c3d931b3ab9 ("Platform: OLPC: Add XO-1.75 EC driver") Signed-off-by: Lubomir Rintel Signed-off-by: Andy Shevchenko --- drivers/platform/olpc/olpc-xo175-ec.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/platform/olpc/olpc-xo175-ec.c b/drivers/platform/olpc/olpc-xo175-ec.c index 48d6f0d87583..83ed1fbf73cf 100644 --- a/drivers/platform/olpc/olpc-xo175-ec.c +++ b/drivers/platform/olpc/olpc-xo175-ec.c @@ -736,6 +736,12 @@ static const struct of_device_id olpc_xo175_ec_of_match[] = { }; MODULE_DEVICE_TABLE(of, olpc_xo175_ec_of_match); +static const struct spi_device_id olpc_xo175_ec_id_table[] = { + { "xo1.75-ec", 0 }, + {} +}; +MODULE_DEVICE_TABLE(spi, olpc_xo175_ec_id_table); + static struct spi_driver olpc_xo175_ec_spi_driver = { .driver = { .name = "olpc-xo175-ec", -- cgit From 66013e8ec6850f9c62df6aea555fe7668e84dc3c Mon Sep 17 00:00:00 2001 From: Rajneesh Bhardwaj Date: Fri, 14 Jun 2019 13:39:40 +0530 Subject: platform/x86: intel_pmc_core: Add ICL-NNPI support to PMC Core Ice Lake Neural Network Processor for deep learning inference a.k.a. ICL-NNPI can re-use Ice Lake Mobile regmap to enable Intel PMC Core driver on it. Cc: Darren Hart Cc: Andy Shevchenko Cc: platform-driver-x86@vger.kernel.org Link: https://lkml.org/lkml/2019/6/5/1034 Signed-off-by: Rajneesh Bhardwaj Signed-off-by: Andy Shevchenko --- drivers/platform/x86/intel_pmc_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c index 235c0b89f824..c510d0d72475 100644 --- a/drivers/platform/x86/intel_pmc_core.c +++ b/drivers/platform/x86/intel_pmc_core.c @@ -812,6 +812,7 @@ static const struct x86_cpu_id intel_pmc_core_ids[] = { INTEL_CPU_FAM6(KABYLAKE_DESKTOP, spt_reg_map), INTEL_CPU_FAM6(CANNONLAKE_MOBILE, cnp_reg_map), INTEL_CPU_FAM6(ICELAKE_MOBILE, icl_reg_map), + INTEL_CPU_FAM6(ICELAKE_NNPI, icl_reg_map), {} }; -- cgit From c8ec4632c6ac9cda0e8c3d51aa41eeab66585bd5 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Mon, 22 Jul 2019 21:43:00 -0700 Subject: ife: error out when nla attributes are empty act_ife at least requires TCA_IFE_PARMS, so we have to bail out when there is no attribute passed in. Reported-by: syzbot+fbb5b288c9cb6a2eeac4@syzkaller.appspotmail.com Fixes: ef6980b6becb ("introduce IFE action") Cc: Jamal Hadi Salim Cc: Jiri Pirko Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/sched/act_ife.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/sched/act_ife.c b/net/sched/act_ife.c index 41d5398dd2f2..3578196d1600 100644 --- a/net/sched/act_ife.c +++ b/net/sched/act_ife.c @@ -481,6 +481,11 @@ static int tcf_ife_init(struct net *net, struct nlattr *nla, int ret = 0; int err; + if (!nla) { + NL_SET_ERR_MSG_MOD(extack, "IFE requires attributes to be passed"); + return -EINVAL; + } + err = nla_parse_nested_deprecated(tb, TCA_IFE_MAX, nla, ife_policy, NULL); if (err < 0) -- cgit From f06d0ca45827a5790d7508de4759aed976933d4d Mon Sep 17 00:00:00 2001 From: Yamin Friedman Date: Tue, 23 Jul 2019 10:22:47 +0300 Subject: linux/dim: Fix overflow in dim calculation While using net_dim, a dim_sample was used without ever initializing the comps value. Added use of DIV_ROUND_DOWN_ULL() to prevent potential overflow, it should not be a problem to save the final result in an int because after the division by epms the value should not be larger than a few thousand. [ 1040.127124] UBSAN: Undefined behaviour in lib/dim/dim.c:78:23 [ 1040.130118] signed integer overflow: [ 1040.131643] 134718714 * 100 cannot be represented in type 'int' Fixes: 398c2b05bbee ("linux/dim: Add completions count to dim_sample") Signed-off-by: Yamin Friedman Signed-off-by: Leon Romanovsky Acked-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bcmsysport.c | 2 +- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c | 4 ++-- lib/dim/dim.c | 4 ++-- 5 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c index b9c5cea8db16..9483553ce444 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.c +++ b/drivers/net/ethernet/broadcom/bcmsysport.c @@ -992,7 +992,7 @@ static int bcm_sysport_poll(struct napi_struct *napi, int budget) { struct bcm_sysport_priv *priv = container_of(napi, struct bcm_sysport_priv, napi); - struct dim_sample dim_sample; + struct dim_sample dim_sample = {}; unsigned int work_done = 0; work_done = bcm_sysport_desc_rx(priv, budget); diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 7134d2c3eb1c..7070349915bc 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -2136,7 +2136,7 @@ static int bnxt_poll(struct napi_struct *napi, int budget) } } if (bp->flags & BNXT_FLAG_DIM) { - struct dim_sample dim_sample; + struct dim_sample dim_sample = {}; dim_update_sample(cpr->event_ctr, cpr->rx_packets, diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index a2b57807453b..d3a0b614dbfa 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1895,7 +1895,7 @@ static int bcmgenet_rx_poll(struct napi_struct *napi, int budget) { struct bcmgenet_rx_ring *ring = container_of(napi, struct bcmgenet_rx_ring, napi); - struct dim_sample dim_sample; + struct dim_sample dim_sample = {}; unsigned int work_done; work_done = bcmgenet_desc_rx(ring, budget); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c index c50b6f0769c8..49b06b256c92 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c @@ -49,7 +49,7 @@ static inline bool mlx5e_channel_no_affinity_change(struct mlx5e_channel *c) static void mlx5e_handle_tx_dim(struct mlx5e_txqsq *sq) { struct mlx5e_sq_stats *stats = sq->stats; - struct dim_sample dim_sample; + struct dim_sample dim_sample = {}; if (unlikely(!test_bit(MLX5E_SQ_STATE_AM, &sq->state))) return; @@ -61,7 +61,7 @@ static void mlx5e_handle_tx_dim(struct mlx5e_txqsq *sq) static void mlx5e_handle_rx_dim(struct mlx5e_rq *rq) { struct mlx5e_rq_stats *stats = rq->stats; - struct dim_sample dim_sample; + struct dim_sample dim_sample = {}; if (unlikely(!test_bit(MLX5E_RQ_STATE_AM, &rq->state))) return; diff --git a/lib/dim/dim.c b/lib/dim/dim.c index 439d641ec796..38045d6d0538 100644 --- a/lib/dim/dim.c +++ b/lib/dim/dim.c @@ -74,8 +74,8 @@ void dim_calc_stats(struct dim_sample *start, struct dim_sample *end, delta_us); curr_stats->cpms = DIV_ROUND_UP(ncomps * USEC_PER_MSEC, delta_us); if (curr_stats->epms != 0) - curr_stats->cpe_ratio = - (curr_stats->cpms * 100) / curr_stats->epms; + curr_stats->cpe_ratio = DIV_ROUND_DOWN_ULL( + curr_stats->cpms * 100, curr_stats->epms); else curr_stats->cpe_ratio = 0; -- cgit From f8be17b81d44aed1f9ea68c3fc70f501c9616e2d Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Tue, 23 Jul 2019 10:22:48 +0300 Subject: lib/dim: Fix -Wunused-const-variable warnings DIM causes to the following warnings during kernel compilation which indicates that tx_profile and rx_profile are supposed to be declared in *.c and not in *.h files. In file included from ./include/rdma/ib_verbs.h:64, from ./include/linux/mlx5/device.h:37, from ./include/linux/mlx5/driver.h:51, from ./include/linux/mlx5/vport.h:36, from drivers/infiniband/hw/mlx5/ib_virt.c:34: ./include/linux/dim.h:326:1: warning: _tx_profile_ defined but not used [-Wunused-const-variable=] 326 | tx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = { | ^~~~~~~~~~ ./include/linux/dim.h:320:1: warning: _rx_profile_ defined but not used [-Wunused-const-variable=] 320 | rx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = { | ^~~~~~~~~~ Fixes: 4f75da3666c0 ("linux/dim: Move implementation to .c files") Signed-off-by: Leon Romanovsky Reviewed-by: Bart Van Assche Acked-by: Saeed Mahameed Signed-off-by: David S. Miller --- include/linux/dim.h | 56 ----------------------------------------------------- lib/dim/net_dim.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+), 56 deletions(-) diff --git a/include/linux/dim.h b/include/linux/dim.h index d3a0fbfff2bb..9fa4b3f88c39 100644 --- a/include/linux/dim.h +++ b/include/linux/dim.h @@ -272,62 +272,6 @@ dim_update_sample_with_comps(u16 event_ctr, u64 packets, u64 bytes, u64 comps, /* Net DIM */ -/* - * Net DIM profiles: - * There are different set of profiles for each CQ period mode. - * There are different set of profiles for RX/TX CQs. - * Each profile size must be of NET_DIM_PARAMS_NUM_PROFILES - */ -#define NET_DIM_PARAMS_NUM_PROFILES 5 -#define NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE 256 -#define NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE 128 -#define NET_DIM_DEF_PROFILE_CQE 1 -#define NET_DIM_DEF_PROFILE_EQE 1 - -#define NET_DIM_RX_EQE_PROFILES { \ - {1, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \ - {8, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \ - {64, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \ - {128, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \ - {256, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \ -} - -#define NET_DIM_RX_CQE_PROFILES { \ - {2, 256}, \ - {8, 128}, \ - {16, 64}, \ - {32, 64}, \ - {64, 64} \ -} - -#define NET_DIM_TX_EQE_PROFILES { \ - {1, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \ - {8, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \ - {32, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \ - {64, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \ - {128, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE} \ -} - -#define NET_DIM_TX_CQE_PROFILES { \ - {5, 128}, \ - {8, 64}, \ - {16, 32}, \ - {32, 32}, \ - {64, 32} \ -} - -static const struct dim_cq_moder -rx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = { - NET_DIM_RX_EQE_PROFILES, - NET_DIM_RX_CQE_PROFILES, -}; - -static const struct dim_cq_moder -tx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = { - NET_DIM_TX_EQE_PROFILES, - NET_DIM_TX_CQE_PROFILES, -}; - /** * net_dim_get_rx_moderation - provide a CQ moderation object for the given RX profile * @cq_period_mode: CQ period mode diff --git a/lib/dim/net_dim.c b/lib/dim/net_dim.c index 5bcc902c5388..a4db51c21266 100644 --- a/lib/dim/net_dim.c +++ b/lib/dim/net_dim.c @@ -5,6 +5,62 @@ #include +/* + * Net DIM profiles: + * There are different set of profiles for each CQ period mode. + * There are different set of profiles for RX/TX CQs. + * Each profile size must be of NET_DIM_PARAMS_NUM_PROFILES + */ +#define NET_DIM_PARAMS_NUM_PROFILES 5 +#define NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE 256 +#define NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE 128 +#define NET_DIM_DEF_PROFILE_CQE 1 +#define NET_DIM_DEF_PROFILE_EQE 1 + +#define NET_DIM_RX_EQE_PROFILES { \ + {1, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \ + {8, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \ + {64, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \ + {128, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \ + {256, NET_DIM_DEFAULT_RX_CQ_MODERATION_PKTS_FROM_EQE}, \ +} + +#define NET_DIM_RX_CQE_PROFILES { \ + {2, 256}, \ + {8, 128}, \ + {16, 64}, \ + {32, 64}, \ + {64, 64} \ +} + +#define NET_DIM_TX_EQE_PROFILES { \ + {1, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \ + {8, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \ + {32, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \ + {64, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE}, \ + {128, NET_DIM_DEFAULT_TX_CQ_MODERATION_PKTS_FROM_EQE} \ +} + +#define NET_DIM_TX_CQE_PROFILES { \ + {5, 128}, \ + {8, 64}, \ + {16, 32}, \ + {32, 32}, \ + {64, 32} \ +} + +static const struct dim_cq_moder +rx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = { + NET_DIM_RX_EQE_PROFILES, + NET_DIM_RX_CQE_PROFILES, +}; + +static const struct dim_cq_moder +tx_profile[DIM_CQ_PERIOD_NUM_MODES][NET_DIM_PARAMS_NUM_PROFILES] = { + NET_DIM_TX_EQE_PROFILES, + NET_DIM_TX_CQE_PROFILES, +}; + struct dim_cq_moder net_dim_get_rx_moderation(u8 cq_period_mode, int ix) { -- cgit From 4b663366246be1d1d4b1b8b01245b2e88ad9e706 Mon Sep 17 00:00:00 2001 From: Alexis Bauvin Date: Tue, 23 Jul 2019 16:23:01 +0200 Subject: tun: mark small packets as owned by the tap sock - v1 -> v2: Move skb_set_owner_w to __tun_build_skb to reduce patch size Small packets going out of a tap device go through an optimized code path that uses build_skb() rather than sock_alloc_send_pskb(). The latter calls skb_set_owner_w(), but the small packet code path does not. The net effect is that small packets are not owned by the userland application's socket (e.g. QEMU), while large packets are. This can be seen with a TCP session, where packets are not owned when the window size is small enough (around PAGE_SIZE), while they are once the window grows (note that this requires the host to support virtio tso for the guest to offload segmentation). All this leads to inconsistent behaviour in the kernel, especially on netfilter modules that uses sk->socket (e.g. xt_owner). Fixes: 66ccbc9c87c2 ("tap: use build_skb() for small packet") Signed-off-by: Alexis Bauvin Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/tun.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 3d443597bd04..db16d7a13e00 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1599,7 +1599,8 @@ static bool tun_can_build_skb(struct tun_struct *tun, struct tun_file *tfile, return true; } -static struct sk_buff *__tun_build_skb(struct page_frag *alloc_frag, char *buf, +static struct sk_buff *__tun_build_skb(struct tun_file *tfile, + struct page_frag *alloc_frag, char *buf, int buflen, int len, int pad) { struct sk_buff *skb = build_skb(buf, buflen); @@ -1609,6 +1610,7 @@ static struct sk_buff *__tun_build_skb(struct page_frag *alloc_frag, char *buf, skb_reserve(skb, pad); skb_put(skb, len); + skb_set_owner_w(skb, tfile->socket.sk); get_page(alloc_frag->page); alloc_frag->offset += buflen; @@ -1686,7 +1688,8 @@ static struct sk_buff *tun_build_skb(struct tun_struct *tun, */ if (hdr->gso_type || !xdp_prog) { *skb_xdp = 1; - return __tun_build_skb(alloc_frag, buf, buflen, len, pad); + return __tun_build_skb(tfile, alloc_frag, buf, buflen, len, + pad); } *skb_xdp = 0; @@ -1723,7 +1726,7 @@ static struct sk_buff *tun_build_skb(struct tun_struct *tun, rcu_read_unlock(); local_bh_enable(); - return __tun_build_skb(alloc_frag, buf, buflen, len, pad); + return __tun_build_skb(tfile, alloc_frag, buf, buflen, len, pad); err_xdp: put_page(alloc_frag->page); -- cgit From 9891d06836e67324c9e9c4675ed90fc8b8110034 Mon Sep 17 00:00:00 2001 From: Navid Emamdoost Date: Tue, 23 Jul 2019 17:04:30 -0500 Subject: st21nfca_connectivity_event_received: null check the allocation devm_kzalloc may fail and return null. So the null check is needed. Signed-off-by: Navid Emamdoost Signed-off-by: David S. Miller --- drivers/nfc/st21nfca/se.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/nfc/st21nfca/se.c b/drivers/nfc/st21nfca/se.c index 06fc542fd198..6586378cacb0 100644 --- a/drivers/nfc/st21nfca/se.c +++ b/drivers/nfc/st21nfca/se.c @@ -317,6 +317,8 @@ int st21nfca_connectivity_event_received(struct nfc_hci_dev *hdev, u8 host, transaction = (struct nfc_evt_transaction *)devm_kzalloc(dev, skb->len - 2, GFP_KERNEL); + if (!transaction) + return -ENOMEM; transaction->aid_len = skb->data[1]; memcpy(transaction->aid, &skb->data[2], -- cgit From 3008e06fdf0973770370f97d5f1fba3701d8281d Mon Sep 17 00:00:00 2001 From: Navid Emamdoost Date: Tue, 23 Jul 2019 17:11:51 -0500 Subject: st_nci_hci_connectivity_event_received: null check the allocation devm_kzalloc may fail and return NULL. So the null check is needed. Signed-off-by: Navid Emamdoost Signed-off-by: David S. Miller --- drivers/nfc/st-nci/se.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/nfc/st-nci/se.c b/drivers/nfc/st-nci/se.c index c3e10b6ab3a4..f25f1ec5f9e9 100644 --- a/drivers/nfc/st-nci/se.c +++ b/drivers/nfc/st-nci/se.c @@ -333,6 +333,8 @@ static int st_nci_hci_connectivity_event_received(struct nci_dev *ndev, transaction = (struct nfc_evt_transaction *)devm_kzalloc(dev, skb->len - 2, GFP_KERNEL); + if (!transaction) + return -ENOMEM; transaction->aid_len = skb->data[1]; memcpy(transaction->aid, &skb->data[2], transaction->aid_len); -- cgit From 83fbae60fd3885c6e8da5863582d0317731c5528 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Wed, 24 Jul 2019 11:35:01 +1200 Subject: fsl/fman: Remove comment referring to non-existent function fm_set_max_frm() existed in the Freescale SDK as a callback for an early_param. When this code was ported to the upstream kernel the early_param was converted to a module_param making the reference to the function incorrect. The rest of the comment already does a good job of explaining the parameter so removing the reference to the non-existent function seems like the best thing to do. Signed-off-by: Chris Packham Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fman/fman.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/ethernet/freescale/fman/fman.c b/drivers/net/ethernet/freescale/fman/fman.c index e80fedb27cee..210749bf1eac 100644 --- a/drivers/net/ethernet/freescale/fman/fman.c +++ b/drivers/net/ethernet/freescale/fman/fman.c @@ -2439,9 +2439,6 @@ MODULE_PARM_DESC(fsl_fm_rx_extra_headroom, "Extra headroom for Rx buffers"); * buffers when not using jumbo frames. * Must be large enough to accommodate the network MTU, but small enough * to avoid wasting skb memory. - * - * Could be overridden once, at boot-time, via the - * fm_set_max_frm() callback. */ static int fsl_fm_max_frm = FSL_FM_MAX_FRAME_SIZE; module_param(fsl_fm_max_frm, int, 0); -- cgit From 2bcbeaefde2f0384d6ad351c151b1a9fe7791a0a Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 24 Jul 2019 08:52:52 +0200 Subject: mm/hmm: always return EBUSY for invalid ranges in hmm_range_{fault,snapshot} We should not have two different error codes for the same condition. EAGAIN must be reserved for the FAULT_FLAG_ALLOW_RETRY retry case and signals to the caller that the mmap_sem has been unlocked. Use EBUSY for the !valid case so that callers can get the locking right. Link: https://lore.kernel.org/r/20190724065258.16603-2-hch@lst.de Tested-by: Ralph Campbell Signed-off-by: Christoph Hellwig Reviewed-by: Ralph Campbell Reviewed-by: Jason Gunthorpe Reviewed-by: Felix Kuehling [jgg: elaborated commit message] Signed-off-by: Jason Gunthorpe --- Documentation/vm/hmm.rst | 2 +- mm/hmm.c | 10 ++++------ 2 files changed, 5 insertions(+), 7 deletions(-) diff --git a/Documentation/vm/hmm.rst b/Documentation/vm/hmm.rst index 7d90964abbb0..710ce1c701bf 100644 --- a/Documentation/vm/hmm.rst +++ b/Documentation/vm/hmm.rst @@ -237,7 +237,7 @@ The usage pattern is:: ret = hmm_range_snapshot(&range); if (ret) { up_read(&mm->mmap_sem); - if (ret == -EAGAIN) { + if (ret == -EBUSY) { /* * No need to check hmm_range_wait_until_valid() return value * on retry we will get proper error with hmm_range_snapshot() diff --git a/mm/hmm.c b/mm/hmm.c index e1eedef129cf..16b6731a34db 100644 --- a/mm/hmm.c +++ b/mm/hmm.c @@ -946,7 +946,7 @@ EXPORT_SYMBOL(hmm_range_unregister); * @range: range * Return: -EINVAL if invalid argument, -ENOMEM out of memory, -EPERM invalid * permission (for instance asking for write and range is read only), - * -EAGAIN if you need to retry, -EFAULT invalid (ie either no valid + * -EBUSY if you need to retry, -EFAULT invalid (ie either no valid * vma or it is illegal to access that range), number of valid pages * in range->pfns[] (from range start address). * @@ -967,7 +967,7 @@ long hmm_range_snapshot(struct hmm_range *range) do { /* If range is no longer valid force retry. */ if (!range->valid) - return -EAGAIN; + return -EBUSY; vma = find_vma(hmm->mm, start); if (vma == NULL || (vma->vm_flags & device_vma)) @@ -1062,10 +1062,8 @@ long hmm_range_fault(struct hmm_range *range, bool block) do { /* If range is no longer valid force retry. */ - if (!range->valid) { - up_read(&hmm->mm->mmap_sem); - return -EAGAIN; - } + if (!range->valid) + return -EBUSY; vma = find_vma(hmm->mm, start); if (vma == NULL || (vma->vm_flags & device_vma)) -- cgit From 02712bc3250849c1cf99d626aea98f610e695f34 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 24 Jul 2019 08:52:53 +0200 Subject: mm/hmm: move hmm_vma_range_done and hmm_vma_fault to nouveau These two functions are marked as a legacy APIs to get rid of, but seem to suit the current nouveau flow. Move it to the only user in preparation for fixing a locking bug involving caller and callee. All comments referring to the old API have been removed as this now is a driver private helper. Link: https://lore.kernel.org/r/20190724065258.16603-3-hch@lst.de Tested-by: Ralph Campbell Signed-off-by: Christoph Hellwig Reviewed-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe --- drivers/gpu/drm/nouveau/nouveau_svm.c | 46 +++++++++++++++++++++++++++-- include/linux/hmm.h | 54 ----------------------------------- 2 files changed, 44 insertions(+), 56 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_svm.c b/drivers/gpu/drm/nouveau/nouveau_svm.c index 8c92374afcf2..6c1b04de0db8 100644 --- a/drivers/gpu/drm/nouveau/nouveau_svm.c +++ b/drivers/gpu/drm/nouveau/nouveau_svm.c @@ -475,6 +475,48 @@ nouveau_svm_fault_cache(struct nouveau_svm *svm, fault->inst, fault->addr, fault->access); } +static inline bool +nouveau_range_done(struct hmm_range *range) +{ + bool ret = hmm_range_valid(range); + + hmm_range_unregister(range); + return ret; +} + +static int +nouveau_range_fault(struct hmm_mirror *mirror, struct hmm_range *range, + bool block) +{ + long ret; + + range->default_flags = 0; + range->pfn_flags_mask = -1UL; + + ret = hmm_range_register(range, mirror, + range->start, range->end, + PAGE_SHIFT); + if (ret) + return (int)ret; + + if (!hmm_range_wait_until_valid(range, HMM_RANGE_DEFAULT_TIMEOUT)) { + up_read(&range->vma->vm_mm->mmap_sem); + return -EAGAIN; + } + + ret = hmm_range_fault(range, block); + if (ret <= 0) { + if (ret == -EBUSY || !ret) { + up_read(&range->vma->vm_mm->mmap_sem); + ret = -EBUSY; + } else if (ret == -EAGAIN) + ret = -EBUSY; + hmm_range_unregister(range); + return ret; + } + return 0; +} + static int nouveau_svm_fault(struct nvif_notify *notify) { @@ -649,10 +691,10 @@ nouveau_svm_fault(struct nvif_notify *notify) range.values = nouveau_svm_pfn_values; range.pfn_shift = NVIF_VMM_PFNMAP_V0_ADDR_SHIFT; again: - ret = hmm_vma_fault(&svmm->mirror, &range, true); + ret = nouveau_range_fault(&svmm->mirror, &range, true); if (ret == 0) { mutex_lock(&svmm->mutex); - if (!hmm_vma_range_done(&range)) { + if (!nouveau_range_done(&range)) { mutex_unlock(&svmm->mutex); goto again; } diff --git a/include/linux/hmm.h b/include/linux/hmm.h index b8a08b2a10ca..7ef56dc18050 100644 --- a/include/linux/hmm.h +++ b/include/linux/hmm.h @@ -484,60 +484,6 @@ long hmm_range_dma_unmap(struct hmm_range *range, */ #define HMM_RANGE_DEFAULT_TIMEOUT 1000 -/* This is a temporary helper to avoid merge conflict between trees. */ -static inline bool hmm_vma_range_done(struct hmm_range *range) -{ - bool ret = hmm_range_valid(range); - - hmm_range_unregister(range); - return ret; -} - -/* This is a temporary helper to avoid merge conflict between trees. */ -static inline int hmm_vma_fault(struct hmm_mirror *mirror, - struct hmm_range *range, bool block) -{ - long ret; - - /* - * With the old API the driver must set each individual entries with - * the requested flags (valid, write, ...). So here we set the mask to - * keep intact the entries provided by the driver and zero out the - * default_flags. - */ - range->default_flags = 0; - range->pfn_flags_mask = -1UL; - - ret = hmm_range_register(range, mirror, - range->start, range->end, - PAGE_SHIFT); - if (ret) - return (int)ret; - - if (!hmm_range_wait_until_valid(range, HMM_RANGE_DEFAULT_TIMEOUT)) { - /* - * The mmap_sem was taken by driver we release it here and - * returns -EAGAIN which correspond to mmap_sem have been - * drop in the old API. - */ - up_read(&range->vma->vm_mm->mmap_sem); - return -EAGAIN; - } - - ret = hmm_range_fault(range, block); - if (ret <= 0) { - if (ret == -EBUSY || !ret) { - /* Same as above, drop mmap_sem to match old API. */ - up_read(&range->vma->vm_mm->mmap_sem); - ret = -EBUSY; - } else if (ret == -EAGAIN) - ret = -EBUSY; - hmm_range_unregister(range); - return ret; - } - return 0; -} - /* Below are for HMM internal use only! Not to be used by device driver! */ static inline void hmm_mm_init(struct mm_struct *mm) { -- cgit From 5fbcf5015db8e9f04a9da6d40322622fa229da54 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 24 Jul 2019 08:52:54 +0200 Subject: nouveau: remove the block parameter to nouveau_range_fault The parameter is always false, so remove it as well as the -EAGAIN handling that can only happen for the non-blocking case. Link: https://lore.kernel.org/r/20190724065258.16603-4-hch@lst.de Tested-by: Ralph Campbell Signed-off-by: Christoph Hellwig Reviewed-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe --- drivers/gpu/drm/nouveau/nouveau_svm.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_svm.c b/drivers/gpu/drm/nouveau/nouveau_svm.c index 6c1b04de0db8..e3097492b4ad 100644 --- a/drivers/gpu/drm/nouveau/nouveau_svm.c +++ b/drivers/gpu/drm/nouveau/nouveau_svm.c @@ -485,8 +485,7 @@ nouveau_range_done(struct hmm_range *range) } static int -nouveau_range_fault(struct hmm_mirror *mirror, struct hmm_range *range, - bool block) +nouveau_range_fault(struct hmm_mirror *mirror, struct hmm_range *range) { long ret; @@ -504,13 +503,12 @@ nouveau_range_fault(struct hmm_mirror *mirror, struct hmm_range *range, return -EAGAIN; } - ret = hmm_range_fault(range, block); + ret = hmm_range_fault(range, true); if (ret <= 0) { if (ret == -EBUSY || !ret) { up_read(&range->vma->vm_mm->mmap_sem); ret = -EBUSY; - } else if (ret == -EAGAIN) - ret = -EBUSY; + } hmm_range_unregister(range); return ret; } @@ -691,7 +689,7 @@ nouveau_svm_fault(struct nvif_notify *notify) range.values = nouveau_svm_pfn_values; range.pfn_shift = NVIF_VMM_PFNMAP_V0_ADDR_SHIFT; again: - ret = nouveau_range_fault(&svmm->mirror, &range, true); + ret = nouveau_range_fault(&svmm->mirror, &range); if (ret == 0) { mutex_lock(&svmm->mutex); if (!nouveau_range_done(&range)) { -- cgit From de4ee728465f7c0c29241550e083139b2ce9159c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 24 Jul 2019 08:52:55 +0200 Subject: nouveau: unlock mmap_sem on all errors from nouveau_range_fault Currently nouveau_svm_fault expects nouveau_range_fault to never unlock mmap_sem, but the latter unlocks it for a random selection of error codes. Fix this up by always unlocking mmap_sem for non-zero return values in nouveau_range_fault, and only unlocking it in the caller for successful returns. Link: https://lore.kernel.org/r/20190724065258.16603-5-hch@lst.de Tested-by: Ralph Campbell Signed-off-by: Christoph Hellwig Reviewed-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe --- drivers/gpu/drm/nouveau/nouveau_svm.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_svm.c b/drivers/gpu/drm/nouveau/nouveau_svm.c index e3097492b4ad..a835cebb6d90 100644 --- a/drivers/gpu/drm/nouveau/nouveau_svm.c +++ b/drivers/gpu/drm/nouveau/nouveau_svm.c @@ -495,8 +495,10 @@ nouveau_range_fault(struct hmm_mirror *mirror, struct hmm_range *range) ret = hmm_range_register(range, mirror, range->start, range->end, PAGE_SHIFT); - if (ret) + if (ret) { + up_read(&range->vma->vm_mm->mmap_sem); return (int)ret; + } if (!hmm_range_wait_until_valid(range, HMM_RANGE_DEFAULT_TIMEOUT)) { up_read(&range->vma->vm_mm->mmap_sem); @@ -505,10 +507,9 @@ nouveau_range_fault(struct hmm_mirror *mirror, struct hmm_range *range) ret = hmm_range_fault(range, true); if (ret <= 0) { - if (ret == -EBUSY || !ret) { - up_read(&range->vma->vm_mm->mmap_sem); + if (ret == 0) ret = -EBUSY; - } + up_read(&range->vma->vm_mm->mmap_sem); hmm_range_unregister(range); return ret; } @@ -706,8 +707,8 @@ again: NULL); svmm->vmm->vmm.object.client->super = false; mutex_unlock(&svmm->mutex); + up_read(&svmm->mm->mmap_sem); } - up_read(&svmm->mm->mmap_sem); /* Cancel any faults in the window whose pages didn't manage * to keep their valid bit, or stay writeable when required. -- cgit From 08aa5e7da6bce1a1963f63cf32c2e7ad434ad578 Mon Sep 17 00:00:00 2001 From: Mark Zhang Date: Tue, 9 Jul 2019 05:37:12 +0300 Subject: net/mlx5: Use reversed order when unregister devices When lag is active, which is controlled by the bonded mlx5e netdev, mlx5 interface unregestering must happen in the reverse order where rdma is unregistered (unloaded) first, to guarantee all references to the lag context in hardware is removed, then remove mlx5e netdev interface which will cleanup the lag context from hardware. Without this fix during destroy of LAG interface, we observed following errors: * mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xe4ac33) * mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xa5aee8). Fixes: a31208b1e11d ("net/mlx5_core: New init and exit flow for mlx5_core") Reviewed-by: Parav Pandit Reviewed-by: Leon Romanovsky Signed-off-by: Mark Zhang Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/dev.c b/drivers/net/ethernet/mellanox/mlx5/core/dev.c index 5bb6a26ea267..50862275544e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/dev.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/dev.c @@ -213,7 +213,7 @@ void mlx5_unregister_device(struct mlx5_core_dev *dev) struct mlx5_interface *intf; mutex_lock(&mlx5_intf_mutex); - list_for_each_entry(intf, &intf_list, list) + list_for_each_entry_reverse(intf, &intf_list, list) mlx5_remove_device(intf, priv); list_del(&priv->dev_list); mutex_unlock(&mlx5_intf_mutex); -- cgit From 987f6c69dd923069d443f6a37225f5b1630a30f2 Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Sun, 14 Jul 2019 11:33:07 +0300 Subject: net/mlx5: Add missing RDMA_RX capabilities New flow table type RDMA_RX was added but the MLX5_CAP_FLOW_TABLE_TYPE didn't handle this new flow table type. This means that MLX5_CAP_FLOW_TABLE_TYPE returns an empty capability to this flow table type. Update both the macro and the maximum supported flow table type to RDMA_RX. Fixes: d83eb50e29de ("net/mlx5: Add support in RDMA RX steering") Signed-off-by: Maor Gottlieb Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h index c48c382f926f..c1252d6be0ef 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.h @@ -68,7 +68,7 @@ enum fs_flow_table_type { FS_FT_SNIFFER_RX = 0X5, FS_FT_SNIFFER_TX = 0X6, FS_FT_RDMA_RX = 0X7, - FS_FT_MAX_TYPE = FS_FT_SNIFFER_TX, + FS_FT_MAX_TYPE = FS_FT_RDMA_RX, }; enum fs_flow_table_op_mod { @@ -275,7 +275,8 @@ void mlx5_cleanup_fs(struct mlx5_core_dev *dev); (type == FS_FT_FDB) ? MLX5_CAP_ESW_FLOWTABLE_FDB(mdev, cap) : \ (type == FS_FT_SNIFFER_RX) ? MLX5_CAP_FLOWTABLE_SNIFFER_RX(mdev, cap) : \ (type == FS_FT_SNIFFER_TX) ? MLX5_CAP_FLOWTABLE_SNIFFER_TX(mdev, cap) : \ - (BUILD_BUG_ON_ZERO(FS_FT_SNIFFER_TX != FS_FT_MAX_TYPE))\ + (type == FS_FT_RDMA_RX) ? MLX5_CAP_FLOWTABLE_RDMA_RX(mdev, cap) : \ + (BUILD_BUG_ON_ZERO(FS_FT_RDMA_RX != FS_FT_MAX_TYPE))\ ) #endif -- cgit From 7a32f2962c56d9d8a836b4469855caeee8766bd4 Mon Sep 17 00:00:00 2001 From: Edward Srouji Date: Tue, 23 Jul 2019 10:12:55 +0300 Subject: net/mlx5: Fix modify_cq_in alignment Fix modify_cq_in alignment to match the device specification. After this fix the 'cq_umem_valid' field will be in the right offset. Cc: # 4.19 Fixes: bd37197554eb ("net/mlx5: Update mlx5_ifc with DEVX UID bits") Signed-off-by: Edward Srouji Reviewed-by: Yishai Hadas Signed-off-by: Leon Romanovsky Signed-off-by: Saeed Mahameed --- include/linux/mlx5/mlx5_ifc.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index b3d5752657d9..ec571fd7fcf8 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -5975,10 +5975,12 @@ struct mlx5_ifc_modify_cq_in_bits { struct mlx5_ifc_cqc_bits cq_context; - u8 reserved_at_280[0x40]; + u8 reserved_at_280[0x60]; u8 cq_umem_valid[0x1]; - u8 reserved_at_2c1[0x5bf]; + u8 reserved_at_2e1[0x1f]; + + u8 reserved_at_300[0x580]; u8 pas[0][0x40]; }; -- cgit From 694826e366349d5b27599f591d3bd3a53512306e Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Sun, 14 Jul 2019 11:43:43 +0300 Subject: net/mlx5e: Fix wrong max num channels indication No XSK support in the enhanced IPoIB driver and representors. Add a profile property to specify this, and enhance the logic that calculates the max number of channels to take it into account. Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en.h | 12 ++------ .../net/ethernet/mellanox/mlx5/core/en/params.h | 5 +-- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 2 +- .../ethernet/mellanox/mlx5/core/en_fs_ethtool.c | 3 +- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 36 ++++++++++------------ drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 ++ drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 8 ++--- .../net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c | 7 ++--- .../ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c | 1 + 9 files changed, 35 insertions(+), 41 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h index 79d93d6c7d7a..ce1be2a84231 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h @@ -159,7 +159,7 @@ do { \ enum mlx5e_rq_group { MLX5E_RQ_GROUP_REGULAR, MLX5E_RQ_GROUP_XSK, - MLX5E_NUM_RQ_GROUPS /* Keep last. */ +#define MLX5E_NUM_RQ_GROUPS(g) (1 + MLX5E_RQ_GROUP_##g) }; static inline u16 mlx5_min_rx_wqes(int wq_type, u32 wq_size) @@ -182,14 +182,6 @@ static inline int mlx5e_get_max_num_channels(struct mlx5_core_dev *mdev) min_t(int, mlx5_comp_vectors_count(mdev), MLX5E_MAX_NUM_CHANNELS); } -/* Use this function to get max num channels after netdev was created */ -static inline int mlx5e_get_netdev_max_channels(struct net_device *netdev) -{ - return min_t(unsigned int, - netdev->num_rx_queues / MLX5E_NUM_RQ_GROUPS, - netdev->num_tx_queues); -} - struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; struct mlx5_wqe_eth_seg eth; @@ -830,6 +822,7 @@ struct mlx5e_priv { struct net_device *netdev; struct mlx5e_stats stats; struct mlx5e_channel_stats channel_stats[MLX5E_MAX_NUM_CHANNELS]; + u16 max_nch; u8 max_opened_tc; struct hwtstamp_config tstamp; u16 q_counter; @@ -871,6 +864,7 @@ struct mlx5e_profile { mlx5e_fp_handle_rx_cqe handle_rx_cqe_mpwqe; } rx_handlers; int max_tc; + u8 rq_groups; }; void mlx5e_build_ptys2ethtool_map(void); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/params.h b/drivers/net/ethernet/mellanox/mlx5/core/en/params.h index bd882b5ee9a7..3a615d663d84 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/params.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/params.h @@ -66,9 +66,10 @@ static inline void mlx5e_qid_get_ch_and_group(struct mlx5e_params *params, *group = qid / nch; } -static inline bool mlx5e_qid_validate(struct mlx5e_params *params, u64 qid) +static inline bool mlx5e_qid_validate(const struct mlx5e_profile *profile, + struct mlx5e_params *params, u64 qid) { - return qid < params->num_channels * MLX5E_NUM_RQ_GROUPS; + return qid < params->num_channels * profile->rq_groups; } /* Parameter calculations */ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 126ec4181286..ed25757ac5bd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -391,7 +391,7 @@ void mlx5e_ethtool_get_channels(struct mlx5e_priv *priv, { mutex_lock(&priv->state_lock); - ch->max_combined = mlx5e_get_netdev_max_channels(priv->netdev); + ch->max_combined = priv->max_nch; ch->combined_count = priv->channels.params.num_channels; if (priv->xsk.refcnt) { /* The upper half are XSK queues. */ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c index ea3a490b569a..94304abc49e9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs_ethtool.c @@ -611,7 +611,8 @@ static int validate_flow(struct mlx5e_priv *priv, return -ENOSPC; if (fs->ring_cookie != RX_CLS_FLOW_DISC) - if (!mlx5e_qid_validate(&priv->channels.params, fs->ring_cookie)) + if (!mlx5e_qid_validate(priv->profile, &priv->channels.params, + fs->ring_cookie)) return -EINVAL; switch (fs->flow_type & ~(FLOW_EXT | FLOW_MAC_EXT)) { diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 47eea6b3a1c3..570c42b7eeea 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1677,10 +1677,10 @@ static int mlx5e_open_sqs(struct mlx5e_channel *c, struct mlx5e_channel_param *cparam) { struct mlx5e_priv *priv = c->priv; - int err, tc, max_nch = mlx5e_get_netdev_max_channels(priv->netdev); + int err, tc; for (tc = 0; tc < params->num_tc; tc++) { - int txq_ix = c->ix + tc * max_nch; + int txq_ix = c->ix + tc * priv->max_nch; err = mlx5e_open_txqsq(c, c->priv->tisn[tc], txq_ix, params, &cparam->sq, &c->sq[tc], tc); @@ -2438,11 +2438,10 @@ int mlx5e_create_indirect_rqt(struct mlx5e_priv *priv) int mlx5e_create_direct_rqts(struct mlx5e_priv *priv, struct mlx5e_tir *tirs) { - const int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); int err; int ix; - for (ix = 0; ix < max_nch; ix++) { + for (ix = 0; ix < priv->max_nch; ix++) { err = mlx5e_create_rqt(priv, 1 /*size */, &tirs[ix].rqt); if (unlikely(err)) goto err_destroy_rqts; @@ -2460,10 +2459,9 @@ err_destroy_rqts: void mlx5e_destroy_direct_rqts(struct mlx5e_priv *priv, struct mlx5e_tir *tirs) { - const int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); int i; - for (i = 0; i < max_nch; i++) + for (i = 0; i < priv->max_nch; i++) mlx5e_destroy_rqt(priv, &tirs[i].rqt); } @@ -2557,7 +2555,7 @@ static void mlx5e_redirect_rqts(struct mlx5e_priv *priv, mlx5e_redirect_rqt(priv, rqtn, MLX5E_INDIR_RQT_SIZE, rrp); } - for (ix = 0; ix < mlx5e_get_netdev_max_channels(priv->netdev); ix++) { + for (ix = 0; ix < priv->max_nch; ix++) { struct mlx5e_redirect_rqt_param direct_rrp = { .is_rss = false, { @@ -2758,7 +2756,7 @@ static int mlx5e_modify_tirs_lro(struct mlx5e_priv *priv) goto free_in; } - for (ix = 0; ix < mlx5e_get_netdev_max_channels(priv->netdev); ix++) { + for (ix = 0; ix < priv->max_nch; ix++) { err = mlx5_core_modify_tir(mdev, priv->direct_tir[ix].tirn, in, inlen); if (err) @@ -2858,12 +2856,11 @@ static void mlx5e_netdev_set_tcs(struct net_device *netdev) static void mlx5e_build_tc2txq_maps(struct mlx5e_priv *priv) { - int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); int i, tc; - for (i = 0; i < max_nch; i++) + for (i = 0; i < priv->max_nch; i++) for (tc = 0; tc < priv->profile->max_tc; tc++) - priv->channel_tc2txq[i][tc] = i + tc * max_nch; + priv->channel_tc2txq[i][tc] = i + tc * priv->max_nch; } static void mlx5e_build_tx2sq_maps(struct mlx5e_priv *priv) @@ -2884,7 +2881,7 @@ static void mlx5e_build_tx2sq_maps(struct mlx5e_priv *priv) void mlx5e_activate_priv_channels(struct mlx5e_priv *priv) { int num_txqs = priv->channels.num * priv->channels.params.num_tc; - int num_rxqs = priv->channels.num * MLX5E_NUM_RQ_GROUPS; + int num_rxqs = priv->channels.num * priv->profile->rq_groups; struct net_device *netdev = priv->netdev; mlx5e_netdev_set_tcs(netdev); @@ -3306,7 +3303,6 @@ err_destroy_inner_tirs: int mlx5e_create_direct_tirs(struct mlx5e_priv *priv, struct mlx5e_tir *tirs) { - const int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); struct mlx5e_tir *tir; void *tirc; int inlen; @@ -3319,7 +3315,7 @@ int mlx5e_create_direct_tirs(struct mlx5e_priv *priv, struct mlx5e_tir *tirs) if (!in) return -ENOMEM; - for (ix = 0; ix < max_nch; ix++) { + for (ix = 0; ix < priv->max_nch; ix++) { memset(in, 0, inlen); tir = &tirs[ix]; tirc = MLX5_ADDR_OF(create_tir_in, in, ctx); @@ -3358,10 +3354,9 @@ void mlx5e_destroy_indirect_tirs(struct mlx5e_priv *priv, bool inner_ttc) void mlx5e_destroy_direct_tirs(struct mlx5e_priv *priv, struct mlx5e_tir *tirs) { - const int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); int i; - for (i = 0; i < max_nch; i++) + for (i = 0; i < priv->max_nch; i++) mlx5e_destroy_tir(priv->mdev, &tirs[i]); } @@ -3487,7 +3482,7 @@ void mlx5e_fold_sw_stats64(struct mlx5e_priv *priv, struct rtnl_link_stats64 *s) { int i; - for (i = 0; i < mlx5e_get_netdev_max_channels(priv->netdev); i++) { + for (i = 0; i < priv->max_nch; i++) { struct mlx5e_channel_stats *channel_stats = &priv->channel_stats[i]; struct mlx5e_rq_stats *xskrq_stats = &channel_stats->xskrq; struct mlx5e_rq_stats *rq_stats = &channel_stats->rq; @@ -4960,8 +4955,7 @@ static int mlx5e_nic_init(struct mlx5_core_dev *mdev, return err; mlx5e_build_nic_params(mdev, &priv->xsk, rss, &priv->channels.params, - mlx5e_get_netdev_max_channels(netdev), - netdev->mtu); + priv->max_nch, netdev->mtu); mlx5e_timestamp_init(priv); @@ -5164,6 +5158,7 @@ static const struct mlx5e_profile mlx5e_nic_profile = { .rx_handlers.handle_rx_cqe = mlx5e_handle_rx_cqe, .rx_handlers.handle_rx_cqe_mpwqe = mlx5e_handle_rx_cqe_mpwrq, .max_tc = MLX5E_MAX_NUM_TC, + .rq_groups = MLX5E_NUM_RQ_GROUPS(XSK), }; /* mlx5e generic netdev management API (move to en_common.c) */ @@ -5181,6 +5176,7 @@ int mlx5e_netdev_init(struct net_device *netdev, priv->profile = profile; priv->ppriv = ppriv; priv->msglevel = MLX5E_MSG_LEVEL; + priv->max_nch = netdev->num_rx_queues / max_t(u8, profile->rq_groups, 1); priv->max_opened_tc = 1; mutex_init(&priv->state_lock); @@ -5218,7 +5214,7 @@ struct net_device *mlx5e_create_netdev(struct mlx5_core_dev *mdev, netdev = alloc_etherdev_mqs(sizeof(struct mlx5e_priv), nch * profile->max_tc, - nch * MLX5E_NUM_RQ_GROUPS); + nch * profile->rq_groups); if (!netdev) { mlx5_core_err(mdev, "alloc_etherdev_mqs() failed\n"); return NULL; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 7245d287633d..731819a26a0c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -1702,6 +1702,7 @@ static const struct mlx5e_profile mlx5e_rep_profile = { .rx_handlers.handle_rx_cqe = mlx5e_handle_rx_cqe_rep, .rx_handlers.handle_rx_cqe_mpwqe = mlx5e_handle_rx_cqe_mpwrq, .max_tc = 1, + .rq_groups = MLX5E_NUM_RQ_GROUPS(REGULAR), }; static const struct mlx5e_profile mlx5e_uplink_rep_profile = { @@ -1719,6 +1720,7 @@ static const struct mlx5e_profile mlx5e_uplink_rep_profile = { .rx_handlers.handle_rx_cqe = mlx5e_handle_rx_cqe_rep, .rx_handlers.handle_rx_cqe_mpwqe = mlx5e_handle_rx_cqe_mpwrq, .max_tc = MLX5E_MAX_NUM_TC, + .rq_groups = MLX5E_NUM_RQ_GROUPS(REGULAR), }; static bool diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c index 539b4d3656da..57f9f346d213 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c @@ -172,7 +172,7 @@ static void mlx5e_grp_sw_update_stats(struct mlx5e_priv *priv) memset(s, 0, sizeof(*s)); - for (i = 0; i < mlx5e_get_netdev_max_channels(priv->netdev); i++) { + for (i = 0; i < priv->max_nch; i++) { struct mlx5e_channel_stats *channel_stats = &priv->channel_stats[i]; struct mlx5e_xdpsq_stats *xdpsq_red_stats = &channel_stats->xdpsq; @@ -1395,7 +1395,7 @@ static const struct counter_desc ch_stats_desc[] = { static int mlx5e_grp_channels_get_num_stats(struct mlx5e_priv *priv) { - int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); + int max_nch = priv->max_nch; return (NUM_RQ_STATS * max_nch) + (NUM_CH_STATS * max_nch) + @@ -1409,8 +1409,8 @@ static int mlx5e_grp_channels_get_num_stats(struct mlx5e_priv *priv) static int mlx5e_grp_channels_fill_strings(struct mlx5e_priv *priv, u8 *data, int idx) { - int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); bool is_xsk = priv->xsk.ever_used; + int max_nch = priv->max_nch; int i, j, tc; for (i = 0; i < max_nch; i++) @@ -1452,8 +1452,8 @@ static int mlx5e_grp_channels_fill_strings(struct mlx5e_priv *priv, u8 *data, static int mlx5e_grp_channels_fill_stats(struct mlx5e_priv *priv, u64 *data, int idx) { - int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); bool is_xsk = priv->xsk.ever_used; + int max_nch = priv->max_nch; int i, j, tc; for (i = 0; i < max_nch; i++) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c index 6bfaaab362dc..1a2560e3bf7c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c @@ -88,8 +88,7 @@ int mlx5i_init(struct mlx5_core_dev *mdev, netdev->mtu = netdev->max_mtu; mlx5e_build_nic_params(mdev, NULL, &priv->rss_params, &priv->channels.params, - mlx5e_get_netdev_max_channels(netdev), - netdev->mtu); + priv->max_nch, netdev->mtu); mlx5i_build_nic_params(mdev, &priv->channels.params); mlx5e_timestamp_init(priv); @@ -118,11 +117,10 @@ void mlx5i_cleanup(struct mlx5e_priv *priv) static void mlx5i_grp_sw_update_stats(struct mlx5e_priv *priv) { - int max_nch = mlx5e_get_netdev_max_channels(priv->netdev); struct mlx5e_sw_stats s = { 0 }; int i, j; - for (i = 0; i < max_nch; i++) { + for (i = 0; i < priv->max_nch; i++) { struct mlx5e_channel_stats *channel_stats; struct mlx5e_rq_stats *rq_stats; @@ -436,6 +434,7 @@ static const struct mlx5e_profile mlx5i_nic_profile = { .rx_handlers.handle_rx_cqe = mlx5i_handle_rx_cqe, .rx_handlers.handle_rx_cqe_mpwqe = NULL, /* Not supported */ .max_tc = MLX5I_MAX_NUM_TC, + .rq_groups = MLX5E_NUM_RQ_GROUPS(REGULAR), }; /* mlx5i netdev NDos */ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c index 6e56fa769d2e..c5a491e22e55 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib_vlan.c @@ -355,6 +355,7 @@ static const struct mlx5e_profile mlx5i_pkey_nic_profile = { .rx_handlers.handle_rx_cqe = mlx5i_handle_rx_cqe, .rx_handlers.handle_rx_cqe_mpwqe = NULL, /* Not supported */ .max_tc = MLX5I_MAX_NUM_TC, + .rq_groups = MLX5E_NUM_RQ_GROUPS(REGULAR), }; const struct mlx5e_profile *mlx5i_pkey_get_profile(void) -- cgit From 4b95840a6ced0634082f6d962ba9aa0ce797f12f Mon Sep 17 00:00:00 2001 From: Aya Levin Date: Sun, 16 Jun 2019 13:20:29 +0300 Subject: net/mlx5e: Fix matching of speed to PRM link modes Speed translation is performed based on legacy or extended PTYS register. Translate speed with respect to: 1) Capability bit of extended PTYS table. 2) User request: a) When auto-negotiation is turned on, inspect advertisement whether it contains extended link modes. b) When auto-negotiation is turned off, speed > 100Gbps (maximal speed supported in legacy mode). With both conditions fulfilled translation is done with extended PTYS table otherwise use legacy PTYS table. Without this patch 25/50/100 Gbps speed cannot be set, since try to configure in extended mode but read from legacy mode. Fixes: dd1b9e09c12b ("net/mlx5: ethtool, Allow legacy link-modes configuration via non-extended ptys") Signed-off-by: Aya Levin Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en/port.c | 27 ++++++--- drivers/net/ethernet/mellanox/mlx5/core/en/port.h | 6 +- .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 67 +++++++++++++++------- 3 files changed, 68 insertions(+), 32 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c index d5e5afbdca6d..f777994f3005 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c @@ -78,9 +78,10 @@ static const u32 mlx5e_ext_link_speed[MLX5E_EXT_LINK_MODES_NUMBER] = { }; static void mlx5e_port_get_speed_arr(struct mlx5_core_dev *mdev, - const u32 **arr, u32 *size) + const u32 **arr, u32 *size, + bool force_legacy) { - bool ext = MLX5_CAP_PCAM_FEATURE(mdev, ptys_extended_ethernet); + bool ext = force_legacy ? false : MLX5_CAP_PCAM_FEATURE(mdev, ptys_extended_ethernet); *size = ext ? ARRAY_SIZE(mlx5e_ext_link_speed) : ARRAY_SIZE(mlx5e_link_speed); @@ -152,7 +153,8 @@ int mlx5_port_set_eth_ptys(struct mlx5_core_dev *dev, bool an_disable, sizeof(out), MLX5_REG_PTYS, 0, 1); } -u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper) +u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper, + bool force_legacy) { unsigned long temp = eth_proto_oper; const u32 *table; @@ -160,7 +162,7 @@ u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper) u32 max_size; int i; - mlx5e_port_get_speed_arr(mdev, &table, &max_size); + mlx5e_port_get_speed_arr(mdev, &table, &max_size, force_legacy); i = find_first_bit(&temp, max_size); if (i < max_size) speed = table[i]; @@ -170,6 +172,7 @@ u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper) int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed) { struct mlx5e_port_eth_proto eproto; + bool force_legacy = false; bool ext; int err; @@ -177,8 +180,13 @@ int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed) err = mlx5_port_query_eth_proto(mdev, 1, ext, &eproto); if (err) goto out; - - *speed = mlx5e_port_ptys2speed(mdev, eproto.oper); + if (ext && !eproto.admin) { + force_legacy = true; + err = mlx5_port_query_eth_proto(mdev, 1, false, &eproto); + if (err) + goto out; + } + *speed = mlx5e_port_ptys2speed(mdev, eproto.oper, force_legacy); if (!(*speed)) err = -EINVAL; @@ -201,7 +209,7 @@ int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed) if (err) return err; - mlx5e_port_get_speed_arr(mdev, &table, &max_size); + mlx5e_port_get_speed_arr(mdev, &table, &max_size, false); for (i = 0; i < max_size; ++i) if (eproto.cap & MLX5E_PROT_MASK(i)) max_speed = max(max_speed, table[i]); @@ -210,14 +218,15 @@ int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed) return 0; } -u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed) +u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed, + bool force_legacy) { u32 link_modes = 0; const u32 *table; u32 max_size; int i; - mlx5e_port_get_speed_arr(mdev, &table, &max_size); + mlx5e_port_get_speed_arr(mdev, &table, &max_size, force_legacy); for (i = 0; i < max_size; ++i) { if (table[i] == speed) link_modes |= MLX5E_PROT_MASK(i); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.h b/drivers/net/ethernet/mellanox/mlx5/core/en/port.h index 70f536ec51c4..4a7f4497692b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.h @@ -48,10 +48,12 @@ void mlx5_port_query_eth_autoneg(struct mlx5_core_dev *dev, u8 *an_status, u8 *an_disable_cap, u8 *an_disable_admin); int mlx5_port_set_eth_ptys(struct mlx5_core_dev *dev, bool an_disable, u32 proto_admin, bool ext); -u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper); +u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper, + bool force_legacy); int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed); int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed); -u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed); +u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed, + bool force_legacy); int mlx5e_port_query_pbmc(struct mlx5_core_dev *mdev, void *out); int mlx5e_port_set_pbmc(struct mlx5_core_dev *mdev, void *in); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index ed25757ac5bd..03bed714bac3 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -785,7 +785,7 @@ static void ptys2ethtool_supported_advertised_port(struct ethtool_link_ksettings } static void get_speed_duplex(struct net_device *netdev, - u32 eth_proto_oper, + u32 eth_proto_oper, bool force_legacy, struct ethtool_link_ksettings *link_ksettings) { struct mlx5e_priv *priv = netdev_priv(netdev); @@ -795,7 +795,7 @@ static void get_speed_duplex(struct net_device *netdev, if (!netif_carrier_ok(netdev)) goto out; - speed = mlx5e_port_ptys2speed(priv->mdev, eth_proto_oper); + speed = mlx5e_port_ptys2speed(priv->mdev, eth_proto_oper, force_legacy); if (!speed) { speed = SPEED_UNKNOWN; goto out; @@ -914,8 +914,8 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv, /* Fields: eth_proto_admin and ext_eth_proto_admin are * mutually exclusive. Hence try reading legacy advertising * when extended advertising is zero. - * admin_ext indicates how eth_proto_admin should be - * interpreted + * admin_ext indicates which proto_admin (ext vs. legacy) + * should be read and interpreted */ admin_ext = ext; if (ext && !eth_proto_admin) { @@ -924,7 +924,7 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv, admin_ext = false; } - eth_proto_oper = MLX5_GET_ETH_PROTO(ptys_reg, out, ext, + eth_proto_oper = MLX5_GET_ETH_PROTO(ptys_reg, out, admin_ext, eth_proto_oper); eth_proto_lp = MLX5_GET(ptys_reg, out, eth_proto_lp_advertise); an_disable_admin = MLX5_GET(ptys_reg, out, an_disable_admin); @@ -939,7 +939,8 @@ int mlx5e_ethtool_get_link_ksettings(struct mlx5e_priv *priv, get_supported(mdev, eth_proto_cap, link_ksettings); get_advertising(eth_proto_admin, tx_pause, rx_pause, link_ksettings, admin_ext); - get_speed_duplex(priv->netdev, eth_proto_oper, link_ksettings); + get_speed_duplex(priv->netdev, eth_proto_oper, !admin_ext, + link_ksettings); eth_proto_oper = eth_proto_oper ? eth_proto_oper : eth_proto_cap; @@ -1016,45 +1017,69 @@ static u32 mlx5e_ethtool2ptys_ext_adver_link(const unsigned long *link_modes) return ptys_modes; } +static bool ext_link_mode_requested(const unsigned long *adver) +{ +#define MLX5E_MIN_PTYS_EXT_LINK_MODE_BIT ETHTOOL_LINK_MODE_50000baseKR_Full_BIT + int size = __ETHTOOL_LINK_MODE_MASK_NBITS - MLX5E_MIN_PTYS_EXT_LINK_MODE_BIT; + __ETHTOOL_DECLARE_LINK_MODE_MASK(modes); + + bitmap_set(modes, MLX5E_MIN_PTYS_EXT_LINK_MODE_BIT, size); + return bitmap_intersects(modes, adver, __ETHTOOL_LINK_MODE_MASK_NBITS); +} + +static bool ext_speed_requested(u32 speed) +{ +#define MLX5E_MAX_PTYS_LEGACY_SPEED 100000 + return !!(speed > MLX5E_MAX_PTYS_LEGACY_SPEED); +} + +static bool ext_requested(u8 autoneg, const unsigned long *adver, u32 speed) +{ + bool ext_link_mode = ext_link_mode_requested(adver); + bool ext_speed = ext_speed_requested(speed); + + return autoneg == AUTONEG_ENABLE ? ext_link_mode : ext_speed; +} + int mlx5e_ethtool_set_link_ksettings(struct mlx5e_priv *priv, const struct ethtool_link_ksettings *link_ksettings) { struct mlx5_core_dev *mdev = priv->mdev; struct mlx5e_port_eth_proto eproto; + const unsigned long *adver; bool an_changes = false; u8 an_disable_admin; bool ext_supported; - bool ext_requested; u8 an_disable_cap; bool an_disable; u32 link_modes; u8 an_status; + u8 autoneg; u32 speed; + bool ext; int err; u32 (*ethtool2ptys_adver_func)(const unsigned long *adver); -#define MLX5E_PTYS_EXT ((1ULL << ETHTOOL_LINK_MODE_50000baseKR_Full_BIT) - 1) + adver = link_ksettings->link_modes.advertising; + autoneg = link_ksettings->base.autoneg; + speed = link_ksettings->base.speed; - ext_requested = !!(link_ksettings->link_modes.advertising[0] > - MLX5E_PTYS_EXT || - link_ksettings->link_modes.advertising[1]); + ext = ext_requested(autoneg, adver, speed), ext_supported = MLX5_CAP_PCAM_FEATURE(mdev, ptys_extended_ethernet); - ext_requested &= ext_supported; + if (!ext_supported && ext) + return -EOPNOTSUPP; - speed = link_ksettings->base.speed; - ethtool2ptys_adver_func = ext_requested ? - mlx5e_ethtool2ptys_ext_adver_link : + ethtool2ptys_adver_func = ext ? mlx5e_ethtool2ptys_ext_adver_link : mlx5e_ethtool2ptys_adver_link; - err = mlx5_port_query_eth_proto(mdev, 1, ext_requested, &eproto); + err = mlx5_port_query_eth_proto(mdev, 1, ext, &eproto); if (err) { netdev_err(priv->netdev, "%s: query port eth proto failed: %d\n", __func__, err); goto out; } - link_modes = link_ksettings->base.autoneg == AUTONEG_ENABLE ? - ethtool2ptys_adver_func(link_ksettings->link_modes.advertising) : - mlx5e_port_speed2linkmodes(mdev, speed); + link_modes = autoneg == AUTONEG_ENABLE ? ethtool2ptys_adver_func(adver) : + mlx5e_port_speed2linkmodes(mdev, speed, !ext); link_modes = link_modes & eproto.cap; if (!link_modes) { @@ -1067,14 +1092,14 @@ int mlx5e_ethtool_set_link_ksettings(struct mlx5e_priv *priv, mlx5_port_query_eth_autoneg(mdev, &an_status, &an_disable_cap, &an_disable_admin); - an_disable = link_ksettings->base.autoneg == AUTONEG_DISABLE; + an_disable = autoneg == AUTONEG_DISABLE; an_changes = ((!an_disable && an_disable_admin) || (an_disable && !an_disable_admin)); if (!an_changes && link_modes == eproto.admin) goto out; - mlx5_port_set_eth_ptys(mdev, an_disable, link_modes, ext_requested); + mlx5_port_set_eth_ptys(mdev, an_disable, link_modes, ext); mlx5_toggle_port_link(mdev); out: -- cgit From 90bb769291161cf25a818d69cf608c181654473e Mon Sep 17 00:00:00 2001 From: Ariel Levkovich Date: Sat, 6 Jul 2019 18:06:15 +0300 Subject: net/mlx5e: Prevent encap flow counter update async to user query This patch prevents a race between user invoked cached counters query and a neighbor last usage updater. The cached flow counter stats can be queried by calling "mlx5_fc_query_cached" which provides the number of bytes and packets that passed via this flow since the last time this counter was queried. It does so by reducting the last saved stats from the current, cached stats and then updating the last saved stats with the cached stats. It also provide the lastuse value for that flow. Since "mlx5e_tc_update_neigh_used_value" needs to retrieve the last usage time of encapsulation flows, it calls the flow counter query method periodically and async to user queries of the flow counter using cls_flower. This call is causing the driver to update the last reported bytes and packets from the cache and therefore, future user queries of the flow stats will return lower than expected number for bytes and packets since the last saved stats in the driver was updated async to the last saved stats in cls_flower. This causes wrong stats presentation of encapsulation flows to user. Since the neighbor usage updater only needs the lastuse stats from the cached counter, the fix is to use a dedicated lastuse query call that returns the lastuse value without synching between the cached stats and the last saved stats. Fixes: f6dfb4c3f216 ("net/mlx5e: Update neighbour 'used' state using HW flow rules counters") Signed-off-by: Ariel Levkovich Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 4 ++-- drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c | 5 +++++ include/linux/mlx5/fs.h | 1 + 3 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index cc096f6011d9..7ecfc53cf5f6 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -1230,13 +1230,13 @@ static struct mlx5_fc *mlx5e_tc_get_counter(struct mlx5e_tc_flow *flow) void mlx5e_tc_update_neigh_used_value(struct mlx5e_neigh_hash_entry *nhe) { struct mlx5e_neigh *m_neigh = &nhe->m_neigh; - u64 bytes, packets, lastuse = 0; struct mlx5e_tc_flow *flow; struct mlx5e_encap_entry *e; struct mlx5_fc *counter; struct neigh_table *tbl; bool neigh_used = false; struct neighbour *n; + u64 lastuse; if (m_neigh->family == AF_INET) tbl = &arp_tbl; @@ -1256,7 +1256,7 @@ void mlx5e_tc_update_neigh_used_value(struct mlx5e_neigh_hash_entry *nhe) encaps[efi->index]); if (flow->flags & MLX5E_TC_FLOW_OFFLOADED) { counter = mlx5e_tc_get_counter(flow); - mlx5_fc_query_cached(counter, &bytes, &packets, &lastuse); + lastuse = mlx5_fc_query_lastuse(counter); if (time_after((unsigned long)lastuse, nhe->reported_lastuse)) { neigh_used = true; break; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c index b3762123a69c..1834d9f3aa1c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c @@ -369,6 +369,11 @@ int mlx5_fc_query(struct mlx5_core_dev *dev, struct mlx5_fc *counter, } EXPORT_SYMBOL(mlx5_fc_query); +u64 mlx5_fc_query_lastuse(struct mlx5_fc *counter) +{ + return counter->cache.lastuse; +} + void mlx5_fc_query_cached(struct mlx5_fc *counter, u64 *bytes, u64 *packets, u64 *lastuse) { diff --git a/include/linux/mlx5/fs.h b/include/linux/mlx5/fs.h index 04a569568eac..f049af3f3cd8 100644 --- a/include/linux/mlx5/fs.h +++ b/include/linux/mlx5/fs.h @@ -220,6 +220,7 @@ int mlx5_modify_rule_destination(struct mlx5_flow_handle *handler, struct mlx5_fc *mlx5_fc_create(struct mlx5_core_dev *dev, bool aging); void mlx5_fc_destroy(struct mlx5_core_dev *dev, struct mlx5_fc *counter); +u64 mlx5_fc_query_lastuse(struct mlx5_fc *counter); void mlx5_fc_query_cached(struct mlx5_fc *counter, u64 *bytes, u64 *packets, u64 *lastuse); int mlx5_fc_query(struct mlx5_core_dev *dev, struct mlx5_fc *counter, -- cgit From 304ecc9a34b81a8b03b685f4460d0f9c1d6d4df9 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Thu, 18 Jul 2019 16:32:31 +0300 Subject: net/mlx5e: kTLS, Call WARN_ONCE on netdev mismatch A netdev mismatch in the processed TLS SKB should not occur, and indicates a kernel bug. Add WARN_ONCE to spot such cases. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Suggested-by: Jakub Kicinski Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c index ea032f54197e..3766545ce259 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c @@ -412,7 +412,7 @@ struct sk_buff *mlx5e_ktls_handle_tx_skb(struct net_device *netdev, goto out; tls_ctx = tls_get_ctx(skb->sk); - if (unlikely(tls_ctx->netdev != netdev)) + if (unlikely(WARN_ON_ONCE(tls_ctx->netdev != netdev))) goto err_out; priv_tx = mlx5e_get_ktls_tx_priv_ctx(tls_ctx); -- cgit From 4ea52e25089724abf7ee2d6c0c52064e49252b64 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Thu, 18 Jul 2019 16:34:05 +0300 Subject: nfp: tls: rename tls packet counters Align to the naming convention in TLS documentation. Fixes: 51a5e563298d ("nfp: tls: add basic statistics") Suggested-by: Jakub Kicinski Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c index d9cbe84ac6ad..1b840ee47339 100644 --- a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c +++ b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c @@ -444,12 +444,12 @@ static u8 *nfp_vnic_get_sw_stats_strings(struct net_device *netdev, u8 *data) data = nfp_pr_et(data, "hw_rx_csum_complete"); data = nfp_pr_et(data, "hw_rx_csum_err"); data = nfp_pr_et(data, "rx_replace_buf_alloc_fail"); - data = nfp_pr_et(data, "rx_tls_decrypted"); + data = nfp_pr_et(data, "rx_tls_decrypted_packets"); data = nfp_pr_et(data, "hw_tx_csum"); data = nfp_pr_et(data, "hw_tx_inner_csum"); data = nfp_pr_et(data, "tx_gather"); data = nfp_pr_et(data, "tx_lso"); - data = nfp_pr_et(data, "tx_tls_encrypted"); + data = nfp_pr_et(data, "tx_tls_encrypted_packets"); data = nfp_pr_et(data, "tx_tls_ooo"); data = nfp_pr_et(data, "tx_tls_drop_no_sync_data"); -- cgit From 280c089916228a005af7f95c1716ea1fea1027b5 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Mon, 22 Jul 2019 13:43:03 +0300 Subject: Documentation: TLS: fix stat counters description Add missing description of counters. Split tx_tls_encrypted counter into two, to give packets and bytes indications. Fixes: f42c104f2ec9 ("Documentation: add TLS offload documentation") Suggested-by: Jakub Kicinski Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed --- Documentation/networking/tls-offload.rst | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/Documentation/networking/tls-offload.rst b/Documentation/networking/tls-offload.rst index 048e5ca44824..b70b70dc4524 100644 --- a/Documentation/networking/tls-offload.rst +++ b/Documentation/networking/tls-offload.rst @@ -424,13 +424,24 @@ Statistics Following minimum set of TLS-related statistics should be reported by the driver: - * ``rx_tls_decrypted`` - number of successfully decrypted TLS segments - * ``tx_tls_encrypted`` - number of in-order TLS segments passed to device - for encryption + * ``rx_tls_decrypted_packets`` - number of successfully decrypted RX packets + which were part of a TLS stream. + * ``rx_tls_decrypted_bytes`` - number of TLS payload bytes in RX packets + which were successfully decrypted. + * ``tx_tls_encrypted_packets`` - number of TX packets passed to the device + for encryption of their TLS payload. + * ``tx_tls_encrypted_bytes`` - number of TLS payload bytes in TX packets + passed to the device for encryption. + * ``tx_tls_ctx`` - number of TLS TX HW offload contexts added to device for + encryption. * ``tx_tls_ooo`` - number of TX packets which were part of a TLS stream - but did not arrive in the expected order - * ``tx_tls_drop_no_sync_data`` - number of TX packets dropped because - they arrived out of order and associated record could not be found + but did not arrive in the expected order. + * ``tx_tls_drop_no_sync_data`` - number of TX packets which were part of + a TLS stream dropped, because they arrived out of order and associated + record could not be found. + * ``tx_tls_drop_bypass_req`` - number of TX packets which were part of a TLS + stream dropped, because they contain both data that has been encrypted by + software and data that expects hardware crypto offload. Notable corner cases, exceptions and additional requirements ============================================================ -- cgit From d1f0b5dce8fda09a7f5f04c1878f181d548e42f5 Mon Sep 17 00:00:00 2001 From: Sudarsana Reddy Kalluru Date: Tue, 23 Jul 2019 19:32:41 -0700 Subject: bnx2x: Disable multi-cos feature. Commit 3968d38917eb ("bnx2x: Fix Multi-Cos.") which enabled multi-cos feature after prolonged time in driver added some regression causing numerous issues (sudden reboots, tx timeout etc.) reported by customers. We plan to backout this commit and submit proper fix once we have root cause of issues reported with this feature enabled. Fixes: 3968d38917eb ("bnx2x: Fix Multi-Cos.") Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index e2be5a685130..e47ea92e2ae3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -1934,8 +1934,7 @@ u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb, } /* select a non-FCoE queue */ - return netdev_pick_tx(dev, skb, NULL) % - (BNX2X_NUM_ETH_QUEUES(bp) * bp->max_cos); + return netdev_pick_tx(dev, skb, NULL) % (BNX2X_NUM_ETH_QUEUES(bp)); } void bnx2x_set_num_queues(struct bnx2x *bp) -- cgit From 53db1cced401e4c65d49edf198e00daa9fc837e6 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 24 Jul 2019 17:07:14 -0700 Subject: selftests/net: add missing gitignores (ipv6_flowlabel) ipv6_flowlabel and ipv6_flowlabel_mgr are missing from gitignore. Quentin points out that the original commit 3fb321fde22d ("selftests/net: ipv6 flowlabel") did add ignore entries, they are just missing the "ipv6_" prefix. Signed-off-by: Jakub Kicinski Reviewed-by: Quentin Monnet Acked-by: Willem de Bruijn Signed-off-by: David S. Miller --- tools/testing/selftests/net/.gitignore | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore index 4ce0bc1612f5..c7cced739c34 100644 --- a/tools/testing/selftests/net/.gitignore +++ b/tools/testing/selftests/net/.gitignore @@ -17,7 +17,7 @@ tcp_inq tls txring_overwrite ip_defrag +ipv6_flowlabel +ipv6_flowlabel_mgr so_txtime -flowlabel -flowlabel_mgr tcp_fastopen_backup_key -- cgit From 47d858d0bdcd47cc1c6c9eeca91b091dd9e55637 Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Thu, 25 Jul 2019 11:07:56 +0800 Subject: ipip: validate header length in ipip_tunnel_xmit We need the same checks introduced by commit cb9f1b783850 ("ip: validate header length on virtual device xmit") for ipip tunnel. Fixes: cb9f1b783850b ("ip: validate header length on virtual device xmit") Signed-off-by: Haishuang Yan Signed-off-by: David S. Miller --- net/ipv4/ipip.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c index 43adfc1641ba..2f01cf6fa0de 100644 --- a/net/ipv4/ipip.c +++ b/net/ipv4/ipip.c @@ -275,6 +275,9 @@ static netdev_tx_t ipip_tunnel_xmit(struct sk_buff *skb, const struct iphdr *tiph = &tunnel->parms.iph; u8 ipproto; + if (!pskb_inet_may_pull(skb)) + goto tx_error; + switch (skb->protocol) { case htons(ETH_P_IP): ipproto = IPPROTO_IPIP; -- cgit From 09e088a4903bd0dd911b4f1732b250130cdaffed Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Wed, 24 Jul 2019 22:08:50 +0800 Subject: xen/pciback: remove set but not used variable 'old_state' Fixes gcc '-Wunused-but-set-variable' warning: drivers/xen/xen-pciback/conf_space_capability.c: In function pm_ctrl_write: drivers/xen/xen-pciback/conf_space_capability.c:119:25: warning: variable old_state set but not used [-Wunused-but-set-variable] It is never used so can be removed. Reported-by: Hulk Robot Signed-off-by: YueHaibing Reviewed-by: Boris Ostrovsky Signed-off-by: Juergen Gross --- drivers/xen/xen-pciback/conf_space_capability.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/xen/xen-pciback/conf_space_capability.c b/drivers/xen/xen-pciback/conf_space_capability.c index 73427d8e0116..e5694133ebe5 100644 --- a/drivers/xen/xen-pciback/conf_space_capability.c +++ b/drivers/xen/xen-pciback/conf_space_capability.c @@ -116,13 +116,12 @@ static int pm_ctrl_write(struct pci_dev *dev, int offset, u16 new_value, { int err; u16 old_value; - pci_power_t new_state, old_state; + pci_power_t new_state; err = pci_read_config_word(dev, offset, &old_value); if (err) goto out; - old_state = (pci_power_t)(old_value & PCI_PM_CTRL_STATE_MASK); new_state = (pci_power_t)(new_value & PCI_PM_CTRL_STATE_MASK); new_value &= PM_OK_BITS; -- cgit From 73f628ec9e6bcc45b77c53fe6d0c0ec55eaf82af Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 26 Jul 2019 07:49:29 -0400 Subject: vhost: disable metadata prefetch optimization This seems to cause guest and host memory corruption. Disable for now until we get a better handle on that. Signed-off-by: Michael S. Tsirkin --- drivers/vhost/vhost.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h index 819296332913..42a8c2a13ab1 100644 --- a/drivers/vhost/vhost.h +++ b/drivers/vhost/vhost.h @@ -96,7 +96,7 @@ struct vhost_uaddr { }; #if defined(CONFIG_MMU_NOTIFIER) && ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE == 0 -#define VHOST_ARCH_CAN_ACCEL_UACCESS 1 +#define VHOST_ARCH_CAN_ACCEL_UACCESS 0 #else #define VHOST_ARCH_CAN_ACCEL_UACCESS 0 #endif -- cgit From e6f4051123fd33901e9655a675b22aefcdc5d277 Mon Sep 17 00:00:00 2001 From: Manikanta Pubbisetty Date: Mon, 22 Jul 2019 12:44:50 +0530 Subject: {nl,mac}80211: fix interface combinations on crypto controlled devices Commit 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices") has introduced a change which allows 4addr operation on crypto controlled devices (ex: ath10k). This change has inadvertently impacted the interface combinations logic on such devices. General rule is that software interfaces like AP/VLAN should not be listed under supported interface combinations and should not be considered during validation of these combinations; because of the aforementioned change, AP/VLAN interfaces(if present) will be checked against interfaces supported by the device and blocks valid interface combinations. Consider a case where an AP and AP/VLAN are up and running; when a second AP device is brought up on the same physical device, this AP will be checked against the AP/VLAN interface (which will not be part of supported interface combinations of the device) and blocks second AP to come up. Add a new API cfg80211_iftype_allowed() to fix the problem, this API works for all devices with/without SW crypto control. Signed-off-by: Manikanta Pubbisetty Fixes: 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices") Link: https://lore.kernel.org/r/1563779690-9716-1-git-send-email-mpubbise@codeaurora.org Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 15 +++++++++++++++ net/mac80211/util.c | 7 +++---- net/wireless/core.c | 6 ++---- net/wireless/nl80211.c | 4 +--- net/wireless/util.c | 27 +++++++++++++++++++++++++-- 5 files changed, 46 insertions(+), 13 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 45850a8391d9..26e2ad2c7027 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -7320,6 +7320,21 @@ void cfg80211_pmsr_complete(struct wireless_dev *wdev, struct cfg80211_pmsr_request *req, gfp_t gfp); +/** + * cfg80211_iftype_allowed - check whether the interface can be allowed + * @wiphy: the wiphy + * @iftype: interface type + * @is_4addr: use_4addr flag, must be '0' when check_swif is '1' + * @check_swif: check iftype against software interfaces + * + * Check whether the interface is allowed to operate; additionally, this API + * can be used to check iftype against the software interfaces when + * check_swif is '1'. + */ +bool cfg80211_iftype_allowed(struct wiphy *wiphy, enum nl80211_iftype iftype, + bool is_4addr, u8 check_swif); + + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 1b224fa27367..ad1e58184c4e 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -3796,9 +3796,7 @@ int ieee80211_check_combinations(struct ieee80211_sub_if_data *sdata, } /* Always allow software iftypes */ - if (local->hw.wiphy->software_iftypes & BIT(iftype) || - (iftype == NL80211_IFTYPE_AP_VLAN && - local->hw.wiphy->flags & WIPHY_FLAG_4ADDR_AP)) { + if (cfg80211_iftype_allowed(local->hw.wiphy, iftype, 0, 1)) { if (radar_detect) return -EINVAL; return 0; @@ -3833,7 +3831,8 @@ int ieee80211_check_combinations(struct ieee80211_sub_if_data *sdata, if (sdata_iter == sdata || !ieee80211_sdata_running(sdata_iter) || - local->hw.wiphy->software_iftypes & BIT(wdev_iter->iftype)) + cfg80211_iftype_allowed(local->hw.wiphy, + wdev_iter->iftype, 0, 1)) continue; params.iftype_num[wdev_iter->iftype]++; diff --git a/net/wireless/core.c b/net/wireless/core.c index 45d9afcff6d5..32b3c719fdfc 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -1410,10 +1410,8 @@ static int cfg80211_netdev_notifier_call(struct notifier_block *nb, } break; case NETDEV_PRE_UP: - if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype)) && - !(wdev->iftype == NL80211_IFTYPE_AP_VLAN && - rdev->wiphy.flags & WIPHY_FLAG_4ADDR_AP && - wdev->use_4addr)) + if (!cfg80211_iftype_allowed(wdev->wiphy, wdev->iftype, + wdev->use_4addr, 0)) return notifier_from_errno(-EOPNOTSUPP); if (rfkill_blocked(rdev->rfkill)) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index fc83dd179c1a..fd05ae1437a9 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3484,9 +3484,7 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info) return err; } - if (!(rdev->wiphy.interface_modes & (1 << type)) && - !(type == NL80211_IFTYPE_AP_VLAN && params.use_4addr && - rdev->wiphy.flags & WIPHY_FLAG_4ADDR_AP)) + if (!cfg80211_iftype_allowed(&rdev->wiphy, type, params.use_4addr, 0)) return -EOPNOTSUPP; err = nl80211_parse_mon_options(rdev, type, info, ¶ms); diff --git a/net/wireless/util.c b/net/wireless/util.c index 1c39d6a2e850..d0e35b7b9e35 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -1697,7 +1697,7 @@ int cfg80211_iter_combinations(struct wiphy *wiphy, for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) { num_interfaces += params->iftype_num[iftype]; if (params->iftype_num[iftype] > 0 && - !(wiphy->software_iftypes & BIT(iftype))) + !cfg80211_iftype_allowed(wiphy, iftype, 0, 1)) used_iftypes |= BIT(iftype); } @@ -1719,7 +1719,7 @@ int cfg80211_iter_combinations(struct wiphy *wiphy, return -ENOMEM; for (iftype = 0; iftype < NUM_NL80211_IFTYPES; iftype++) { - if (wiphy->software_iftypes & BIT(iftype)) + if (cfg80211_iftype_allowed(wiphy, iftype, 0, 1)) continue; for (j = 0; j < c->n_limits; j++) { all_iftypes |= limits[j].types; @@ -2072,3 +2072,26 @@ int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap, return max_vht_nss; } EXPORT_SYMBOL(ieee80211_get_vht_max_nss); + +bool cfg80211_iftype_allowed(struct wiphy *wiphy, enum nl80211_iftype iftype, + bool is_4addr, u8 check_swif) + +{ + bool is_vlan = iftype == NL80211_IFTYPE_AP_VLAN; + + switch (check_swif) { + case 0: + if (is_vlan && is_4addr) + return wiphy->flags & WIPHY_FLAG_4ADDR_AP; + return wiphy->interface_modes & BIT(iftype); + case 1: + if (!(wiphy->software_iftypes & BIT(iftype)) && is_vlan) + return wiphy->flags & WIPHY_FLAG_4ADDR_AP; + return wiphy->software_iftypes & BIT(iftype); + default: + break; + } + + return false; +} +EXPORT_SYMBOL(cfg80211_iftype_allowed); -- cgit From 34a2a80ff30b5d2330abfa8980c7f0cc15a8158a Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 25 Jul 2019 11:34:23 +0300 Subject: ASoC: ti: davinci-mcasp: Fix clk PDIR handling for i2s master mode When running McASP as master capture alone will not record any audio unless a parallel playback stream is running. As soon as the playback stops the captured data is going to be silent again. In McASP master mode we need to set the PDIR for the clock pins and fix the mcasp_set_axr_pdir() to skip the bits in the PDIR registers above AMUTE. This went unnoticed as most of the boards uses McASP as slave and neither of these issues are visible (audible) in those setups. Fixes: ca3d9433349e ("ASoC: davinci-mcasp: Update PDIR (pin direction) register handling") Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20190725083423.7321-1-peter.ujfalusi@ti.com Signed-off-by: Mark Brown --- sound/soc/ti/davinci-mcasp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/ti/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c index 2c518088b64d..4d611565375b 100644 --- a/sound/soc/ti/davinci-mcasp.c +++ b/sound/soc/ti/davinci-mcasp.c @@ -195,7 +195,7 @@ static inline void mcasp_set_axr_pdir(struct davinci_mcasp *mcasp, bool enable) { u32 bit; - for_each_set_bit(bit, &mcasp->pdir, PIN_BIT_AFSR) { + for_each_set_bit(bit, &mcasp->pdir, PIN_BIT_AMUTE) { if (enable) mcasp_set_bits(mcasp, DAVINCI_MCASP_PDIR_REG, BIT(bit)); else @@ -223,6 +223,7 @@ static void mcasp_start_rx(struct davinci_mcasp *mcasp) if (mcasp_is_synchronous(mcasp)) { mcasp_set_ctl_reg(mcasp, DAVINCI_MCASP_GBLCTLX_REG, TXHCLKRST); mcasp_set_ctl_reg(mcasp, DAVINCI_MCASP_GBLCTLX_REG, TXCLKRST); + mcasp_set_clk_pdir(mcasp, true); } /* Activate serializer(s) */ -- cgit From e51b69808b7ec06fc61f5a332f338d94b64b0537 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Thu, 25 Jul 2019 07:35:23 +0200 Subject: ASoC: Intel: Fix some acpi vs apci typo in somme comments Fix some typo to have the filaname given in a comment match the real name of the file. Some 'acpi' have erroneously been written 'apci' Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/20190725053523.16542-1-christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown --- sound/soc/intel/common/soc-acpi-intel-bxt-match.c | 2 +- sound/soc/intel/common/soc-acpi-intel-byt-match.c | 2 +- sound/soc/intel/common/soc-acpi-intel-cht-match.c | 2 +- sound/soc/intel/common/soc-acpi-intel-cnl-match.c | 2 +- sound/soc/intel/common/soc-acpi-intel-glk-match.c | 2 +- sound/soc/intel/common/soc-acpi-intel-hda-match.c | 2 +- sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c | 2 +- sound/soc/intel/common/soc-acpi-intel-icl-match.c | 2 +- sound/soc/intel/common/soc-acpi-intel-kbl-match.c | 2 +- sound/soc/intel/common/soc-acpi-intel-skl-match.c | 2 +- 10 files changed, 10 insertions(+), 10 deletions(-) diff --git a/sound/soc/intel/common/soc-acpi-intel-bxt-match.c b/sound/soc/intel/common/soc-acpi-intel-bxt-match.c index 229e39586868..4a5adae1d785 100644 --- a/sound/soc/intel/common/soc-acpi-intel-bxt-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-bxt-match.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * soc-apci-intel-bxt-match.c - tables and support for BXT ACPI enumeration. + * soc-acpi-intel-bxt-match.c - tables and support for BXT ACPI enumeration. * * Copyright (c) 2018, Intel Corporation. * diff --git a/sound/soc/intel/common/soc-acpi-intel-byt-match.c b/sound/soc/intel/common/soc-acpi-intel-byt-match.c index b94b482ac34f..1cc801ba92eb 100644 --- a/sound/soc/intel/common/soc-acpi-intel-byt-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-byt-match.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * soc-apci-intel-byt-match.c - tables and support for BYT ACPI enumeration. + * soc-acpi-intel-byt-match.c - tables and support for BYT ACPI enumeration. * * Copyright (c) 2017, Intel Corporation. */ diff --git a/sound/soc/intel/common/soc-acpi-intel-cht-match.c b/sound/soc/intel/common/soc-acpi-intel-cht-match.c index b7f11f6be1cf..d0fb43c2b9f6 100644 --- a/sound/soc/intel/common/soc-acpi-intel-cht-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-cht-match.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * soc-apci-intel-cht-match.c - tables and support for CHT ACPI enumeration. + * soc-acpi-intel-cht-match.c - tables and support for CHT ACPI enumeration. * * Copyright (c) 2017, Intel Corporation. */ diff --git a/sound/soc/intel/common/soc-acpi-intel-cnl-match.c b/sound/soc/intel/common/soc-acpi-intel-cnl-match.c index c36c0aa4f683..771b0ef21051 100644 --- a/sound/soc/intel/common/soc-acpi-intel-cnl-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-cnl-match.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * soc-apci-intel-cnl-match.c - tables and support for CNL ACPI enumeration. + * soc-acpi-intel-cnl-match.c - tables and support for CNL ACPI enumeration. * * Copyright (c) 2018, Intel Corporation. * diff --git a/sound/soc/intel/common/soc-acpi-intel-glk-match.c b/sound/soc/intel/common/soc-acpi-intel-glk-match.c index 616eb09e78a0..60dea358fa04 100644 --- a/sound/soc/intel/common/soc-acpi-intel-glk-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-glk-match.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * soc-apci-intel-glk-match.c - tables and support for GLK ACPI enumeration. + * soc-acpi-intel-glk-match.c - tables and support for GLK ACPI enumeration. * * Copyright (c) 2018, Intel Corporation. * diff --git a/sound/soc/intel/common/soc-acpi-intel-hda-match.c b/sound/soc/intel/common/soc-acpi-intel-hda-match.c index 68ae43f7b4b2..cc972d2ac691 100644 --- a/sound/soc/intel/common/soc-acpi-intel-hda-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-hda-match.c @@ -2,7 +2,7 @@ // Copyright (c) 2018, Intel Corporation. /* - * soc-apci-intel-hda-match.c - tables and support for HDA+ACPI enumeration. + * soc-acpi-intel-hda-match.c - tables and support for HDA+ACPI enumeration. * */ diff --git a/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c b/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c index d27853e7a369..34eb0baaa951 100644 --- a/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * soc-apci-intel-hsw-bdw-match.c - tables and support for ACPI enumeration. + * soc-acpi-intel-hsw-bdw-match.c - tables and support for ACPI enumeration. * * Copyright (c) 2017, Intel Corporation. */ diff --git a/sound/soc/intel/common/soc-acpi-intel-icl-match.c b/sound/soc/intel/common/soc-acpi-intel-icl-match.c index 0b430b9b3673..38977669b576 100644 --- a/sound/soc/intel/common/soc-acpi-intel-icl-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-icl-match.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * soc-apci-intel-icl-match.c - tables and support for ICL ACPI enumeration. + * soc-acpi-intel-icl-match.c - tables and support for ICL ACPI enumeration. * * Copyright (c) 2018, Intel Corporation. * diff --git a/sound/soc/intel/common/soc-acpi-intel-kbl-match.c b/sound/soc/intel/common/soc-acpi-intel-kbl-match.c index 4b331058e807..e200baa11011 100644 --- a/sound/soc/intel/common/soc-acpi-intel-kbl-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-kbl-match.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * soc-apci-intel-kbl-match.c - tables and support for KBL ACPI enumeration. + * soc-acpi-intel-kbl-match.c - tables and support for KBL ACPI enumeration. * * Copyright (c) 2018, Intel Corporation. * diff --git a/sound/soc/intel/common/soc-acpi-intel-skl-match.c b/sound/soc/intel/common/soc-acpi-intel-skl-match.c index 0c9c0edd35b3..42fa40a8d932 100644 --- a/sound/soc/intel/common/soc-acpi-intel-skl-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-skl-match.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * soc-apci-intel-skl-match.c - tables and support for SKL ACPI enumeration. + * soc-acpi-intel-skl-match.c - tables and support for SKL ACPI enumeration. * * Copyright (c) 2018, Intel Corporation. * -- cgit From 789e162a6255325325bd321ab0cd51dc7e285054 Mon Sep 17 00:00:00 2001 From: Cheng-Yi Chiang Date: Fri, 26 Jul 2019 12:42:02 +0800 Subject: ASoC: rockchip: Fix mono capture This reverts commit db51707b9c9aeedd310ebce60f15d5bb006567e0. Revert "ASoC: rockchip: i2s: Support mono capture" Previous discussion in https://patchwork.kernel.org/patch/10147153/ explains the issue of the patch. While device is configured as 1-ch, hardware is still generating a 2-ch stream. When user space reads the data and assumes it is a 1-ch stream, the rate will be slower by 2x. Revert the change so 1-ch is not supported. User space can selectively take one channel data out of two channel if 1-ch is preferred. Currently, both channels record identical data. Signed-off-by: Cheng-Yi Chiang Link: https://lore.kernel.org/r/20190726044202.26866-1-cychiang@chromium.org Signed-off-by: Mark Brown --- sound/soc/rockchip/rockchip_i2s.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c index 0a34d0eb8dba..88ebaf6e1880 100644 --- a/sound/soc/rockchip/rockchip_i2s.c +++ b/sound/soc/rockchip/rockchip_i2s.c @@ -326,7 +326,6 @@ static int rockchip_i2s_hw_params(struct snd_pcm_substream *substream, val |= I2S_CHN_4; break; case 2: - case 1: val |= I2S_CHN_2; break; default: @@ -459,7 +458,7 @@ static struct snd_soc_dai_driver rockchip_i2s_dai = { }, .capture = { .stream_name = "Capture", - .channels_min = 1, + .channels_min = 2, .channels_max = 2, .rates = SNDRV_PCM_RATE_8000_192000, .formats = (SNDRV_PCM_FMTBIT_S8 | @@ -659,7 +658,7 @@ static int rockchip_i2s_probe(struct platform_device *pdev) } if (!of_property_read_u32(node, "rockchip,capture-channels", &val)) { - if (val >= 1 && val <= 8) + if (val >= 2 && val <= 8) soc_dai->capture.channels_max = val; } -- cgit From 1e112c35e3c96db7c8ca6ddaa96574f00c06e7db Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Fri, 26 Jul 2019 09:42:43 +0300 Subject: ASoC: ti: davinci-mcasp: Correct slot_width posed constraint The slot_width is a property for the bus while the constraint for SNDRV_PCM_HW_PARAM_SAMPLE_BITS is for the in memory format. Applying slot_width constraint to sample_bits works most of the time, but it will blacklist valid formats in some cases. With slot_width 24 we can support S24_3LE and S24_LE formats as they both look the same on the bus, but a a 24 constraint on sample_bits would not allow S24_LE as it is stored in 32bits in memory. Implement a simple hw_rule function to allow all formats which require less or equal number of bits on the bus as slot_width (if configured). Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20190726064244.3762-2-peter.ujfalusi@ti.com Signed-off-by: Mark Brown --- sound/soc/ti/davinci-mcasp.c | 43 ++++++++++++++++++++++++++++++++++--------- 1 file changed, 34 insertions(+), 9 deletions(-) diff --git a/sound/soc/ti/davinci-mcasp.c b/sound/soc/ti/davinci-mcasp.c index 4d611565375b..44708c8f90d6 100644 --- a/sound/soc/ti/davinci-mcasp.c +++ b/sound/soc/ti/davinci-mcasp.c @@ -1257,6 +1257,28 @@ static int davinci_mcasp_trigger(struct snd_pcm_substream *substream, return ret; } +static int davinci_mcasp_hw_rule_slot_width(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct davinci_mcasp_ruledata *rd = rule->private; + struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + struct snd_mask nfmt; + int i, slot_width; + + snd_mask_none(&nfmt); + slot_width = rd->mcasp->slot_width; + + for (i = 0; i <= SNDRV_PCM_FORMAT_LAST; i++) { + if (snd_mask_test(fmt, i)) { + if (snd_pcm_format_width(i) <= slot_width) { + snd_mask_set(&nfmt, i); + } + } + } + + return snd_mask_refine(fmt, &nfmt); +} + static const unsigned int davinci_mcasp_dai_rates[] = { 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000, @@ -1378,7 +1400,7 @@ static int davinci_mcasp_startup(struct snd_pcm_substream *substream, struct davinci_mcasp_ruledata *ruledata = &mcasp->ruledata[substream->stream]; u32 max_channels = 0; - int i, dir; + int i, dir, ret; int tdm_slots = mcasp->tdm_slots; /* Do not allow more then one stream per direction */ @@ -1407,6 +1429,7 @@ static int davinci_mcasp_startup(struct snd_pcm_substream *substream, max_channels++; } ruledata->serializers = max_channels; + ruledata->mcasp = mcasp; max_channels *= tdm_slots; /* * If the already active stream has less channels than the calculated @@ -1432,20 +1455,22 @@ static int davinci_mcasp_startup(struct snd_pcm_substream *substream, 0, SNDRV_PCM_HW_PARAM_CHANNELS, &mcasp->chconstr[substream->stream]); - if (mcasp->slot_width) - snd_pcm_hw_constraint_minmax(substream->runtime, - SNDRV_PCM_HW_PARAM_SAMPLE_BITS, - 8, mcasp->slot_width); + if (mcasp->slot_width) { + /* Only allow formats require <= slot_width bits on the bus */ + ret = snd_pcm_hw_rule_add(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_FORMAT, + davinci_mcasp_hw_rule_slot_width, + ruledata, + SNDRV_PCM_HW_PARAM_FORMAT, -1); + if (ret) + return ret; + } /* * If we rely on implicit BCLK divider setting we should * set constraints based on what we can provide. */ if (mcasp->bclk_master && mcasp->bclk_div == 0 && mcasp->sysclk_freq) { - int ret; - - ruledata->mcasp = mcasp; - ret = snd_pcm_hw_rule_add(substream->runtime, 0, SNDRV_PCM_HW_PARAM_RATE, davinci_mcasp_hw_rule_rate, -- cgit From 52f8c8b32ea2f2044efcb4214c1857e29f421c5d Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Fri, 26 Jul 2019 13:28:26 +0200 Subject: irqchip/gic-v3: Mark expected switch fall-through MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When fall-through warnings was enabled by default the following warning was starting to show up: In file included from ../arch/arm64/include/asm/cputype.h:132, from ../arch/arm64/include/asm/cache.h:8, from ../include/linux/cache.h:6, from ../include/linux/printk.h:9, from ../include/linux/kernel.h:15, from ../include/linux/list.h:9, from ../include/linux/kobject.h:19, from ../include/linux/of.h:17, from ../include/linux/irqdomain.h:35, from ../include/linux/acpi.h:13, from ../drivers/irqchip/irq-gic-v3.c:9: ../drivers/irqchip/irq-gic-v3.c: In function ‘gic_cpu_sys_reg_init’: ../arch/arm64/include/asm/sysreg.h:853:2: warning: this statement may fall through [-Wimplicit-fallthrough=] asm volatile(__msr_s(r, "%x0") : : "rZ" (__val)); \ ^~~ ../arch/arm64/include/asm/arch_gicv3.h:20:29: note: in expansion of macro ‘write_sysreg_s’ #define write_gicreg(v, r) write_sysreg_s(v, SYS_ ## r) ^~~~~~~~~~~~~~ ../drivers/irqchip/irq-gic-v3.c:773:4: note: in expansion of macro ‘write_gicreg’ write_gicreg(0, ICC_AP0R2_EL1); ^~~~~~~~~~~~ ../drivers/irqchip/irq-gic-v3.c:774:3: note: here case 6: ^~~~ Rework so that the compiler doesn't warn about fall-through. Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning") Signed-off-by: Anders Roxell Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-gic-v3.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index 1282f81696b2..acd784c37090 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -775,8 +775,10 @@ static void gic_cpu_sys_reg_init(void) case 7: write_gicreg(0, ICC_AP0R3_EL1); write_gicreg(0, ICC_AP0R2_EL1); + /* Fall through */ case 6: write_gicreg(0, ICC_AP0R1_EL1); + /* Fall through */ case 5: case 4: write_gicreg(0, ICC_AP0R0_EL1); @@ -790,8 +792,10 @@ static void gic_cpu_sys_reg_init(void) case 7: write_gicreg(0, ICC_AP1R3_EL1); write_gicreg(0, ICC_AP1R2_EL1); + /* Fall through */ case 6: write_gicreg(0, ICC_AP1R1_EL1); + /* Fall through */ case 5: case 4: write_gicreg(0, ICC_AP1R0_EL1); -- cgit From 34f8eb92ca053cbba2887bb7e4dbf2b2cd6eb733 Mon Sep 17 00:00:00 2001 From: Nianyao Tang Date: Fri, 26 Jul 2019 17:32:57 +0800 Subject: irqchip/gic-v3-its: Free unused vpt_page when alloc vpe table fail In its_vpe_init, when its_alloc_vpe_table fails, we should free vpt_page allocated just before, instead of vpe->vpt_page. Let's fix it. Cc: Thomas Gleixner Cc: Jason Cooper Cc: Marc Zyngier Signed-off-by: Nianyao Tang Signed-off-by: Shaokun Zhang Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-gic-v3-its.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index cfb9b4e5f914..4439ed881f98 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -3008,7 +3008,7 @@ static int its_vpe_init(struct its_vpe *vpe) if (!its_alloc_vpe_table(vpe_id)) { its_vpe_id_free(vpe_id); - its_free_pending_table(vpe->vpt_page); + its_free_pending_table(vpt_page); return -ENOMEM; } -- cgit From 321275f0d8f5939f2a98749fe03ee97ac97e73d0 Mon Sep 17 00:00:00 2001 From: Nishka Dasgupta Date: Tue, 23 Jul 2019 16:09:10 +0530 Subject: irqchip/irq-mbigen: Add of_node_put() before return Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Add an of_node_put before the return in three places. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-mbigen.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c index c0f65ea0ae0f..64f3574cc009 100644 --- a/drivers/irqchip/irq-mbigen.c +++ b/drivers/irqchip/irq-mbigen.c @@ -252,12 +252,15 @@ static int mbigen_of_create_domain(struct platform_device *pdev, parent = platform_bus_type.dev_root; child = of_platform_device_create(np, NULL, parent); - if (!child) + if (!child) { + of_node_put(np); return -ENOMEM; + } if (of_property_read_u32(child->dev.of_node, "num-pins", &num_pins) < 0) { dev_err(&pdev->dev, "No num-pins property\n"); + of_node_put(np); return -EINVAL; } @@ -265,8 +268,10 @@ static int mbigen_of_create_domain(struct platform_device *pdev, mbigen_write_msg, &mbigen_domain_ops, mgn_chip); - if (!domain) + if (!domain) { + of_node_put(np); return -ENOMEM; + } } return 0; -- cgit From 9a446ef08f3bfc0c3deb9c6be840af2528ef8cf8 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Fri, 12 Jul 2019 15:29:05 +0200 Subject: irqchip/irq-imx-gpcv2: Forward irq type to parent The GPCv2 is a stacked IRQ controller below the ARM GIC. It doesn't care about the IRQ type itself, but needs to forward the type to the parent IRQ controller, so this one can be configured correctly. Signed-off-by: Lucas Stach Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-imx-gpcv2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/irqchip/irq-imx-gpcv2.c b/drivers/irqchip/irq-imx-gpcv2.c index 66501ea4fd75..f869386eb4cf 100644 --- a/drivers/irqchip/irq-imx-gpcv2.c +++ b/drivers/irqchip/irq-imx-gpcv2.c @@ -134,6 +134,7 @@ static struct irq_chip gpcv2_irqchip_data_chip = { .irq_unmask = imx_gpcv2_irq_unmask, .irq_set_wake = imx_gpcv2_irq_set_wake, .irq_retrigger = irq_chip_retrigger_hierarchy, + .irq_set_type = irq_chip_set_type_parent, #ifdef CONFIG_SMP .irq_set_affinity = irq_chip_set_affinity_parent, #endif -- cgit From b5fa9fc9e809f84bb20439730162eccfed906a76 Mon Sep 17 00:00:00 2001 From: Wen Yang Date: Mon, 8 Jul 2019 14:19:04 +0800 Subject: irqchip/renesas-rza1: Fix an use-after-free in rza1_irqc_probe() The gic_node is still being used in the rza1_irqc_parse_map() call after the of_node_put() call, which may result in use-after-free. Fixes: a644ccb819bc ("irqchip: Add Renesas RZ/A1 Interrupt Controller driver") Signed-off-by: Wen Yang Reviewed-by: Geert Uytterhoeven Signed-off-by: Marc Zyngier --- drivers/irqchip/irq-renesas-rza1.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/irqchip/irq-renesas-rza1.c b/drivers/irqchip/irq-renesas-rza1.c index b1f19b210190..b0d46ac42b89 100644 --- a/drivers/irqchip/irq-renesas-rza1.c +++ b/drivers/irqchip/irq-renesas-rza1.c @@ -208,20 +208,19 @@ static int rza1_irqc_probe(struct platform_device *pdev) return PTR_ERR(priv->base); gic_node = of_irq_find_parent(np); - if (gic_node) { + if (gic_node) parent = irq_find_host(gic_node); - of_node_put(gic_node); - } if (!parent) { dev_err(dev, "cannot find parent domain\n"); - return -ENODEV; + ret = -ENODEV; + goto out_put_node; } ret = rza1_irqc_parse_map(priv, gic_node); if (ret) { dev_err(dev, "cannot parse %s: %d\n", "interrupt-map", ret); - return ret; + goto out_put_node; } priv->chip.name = "rza1-irqc", @@ -237,10 +236,12 @@ static int rza1_irqc_probe(struct platform_device *pdev) priv); if (!priv->irq_domain) { dev_err(dev, "cannot initialize irq domain\n"); - return -ENOMEM; + ret = -ENOMEM; } - return 0; +out_put_node: + of_node_put(gic_node); + return ret; } static int rza1_irqc_remove(struct platform_device *pdev) -- cgit From 3d584a3c85d6fe2cf878f220d4ad7145e7f89218 Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Fri, 26 Jul 2019 13:27:05 +0200 Subject: arm64: KVM: regmap: Fix unexpected switch fall-through MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When fall-through warnings was enabled by default, commit d93512ef0f0e ("Makefile: Globally enable fall-through warning"), the following warnings was starting to show up: In file included from ../arch/arm64/include/asm/kvm_emulate.h:19, from ../arch/arm64/kvm/regmap.c:13: ../arch/arm64/kvm/regmap.c: In function ‘vcpu_write_spsr32’: ../arch/arm64/include/asm/kvm_hyp.h:31:3: warning: this statement may fall through [-Wimplicit-fallthrough=] asm volatile(ALTERNATIVE(__msr_s(r##nvh, "%x0"), \ ^~~ ../arch/arm64/include/asm/kvm_hyp.h:46:31: note: in expansion of macro ‘write_sysreg_elx’ #define write_sysreg_el1(v,r) write_sysreg_elx(v, r, _EL1, _EL12) ^~~~~~~~~~~~~~~~ ../arch/arm64/kvm/regmap.c:180:3: note: in expansion of macro ‘write_sysreg_el1’ write_sysreg_el1(v, SYS_SPSR); ^~~~~~~~~~~~~~~~ ../arch/arm64/kvm/regmap.c:181:2: note: here case KVM_SPSR_ABT: ^~~~ In file included from ../arch/arm64/include/asm/cputype.h:132, from ../arch/arm64/include/asm/cache.h:8, from ../include/linux/cache.h:6, from ../include/linux/printk.h:9, from ../include/linux/kernel.h:15, from ../include/asm-generic/bug.h:18, from ../arch/arm64/include/asm/bug.h:26, from ../include/linux/bug.h:5, from ../include/linux/mmdebug.h:5, from ../include/linux/mm.h:9, from ../arch/arm64/kvm/regmap.c:11: ../arch/arm64/include/asm/sysreg.h:837:2: warning: this statement may fall through [-Wimplicit-fallthrough=] asm volatile("msr " __stringify(r) ", %x0" \ ^~~ ../arch/arm64/kvm/regmap.c:182:3: note: in expansion of macro ‘write_sysreg’ write_sysreg(v, spsr_abt); ^~~~~~~~~~~~ ../arch/arm64/kvm/regmap.c:183:2: note: here case KVM_SPSR_UND: ^~~~ Rework to add a 'break;' in the swich-case since it didn't have that, leading to an interresting set of bugs. Cc: stable@vger.kernel.org # v4.17+ Fixes: a892819560c4 ("KVM: arm64: Prepare to handle deferred save/restore of 32-bit registers") Signed-off-by: Anders Roxell [maz: reworked commit message, fixed stable range] Signed-off-by: Marc Zyngier --- arch/arm64/kvm/regmap.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/kvm/regmap.c b/arch/arm64/kvm/regmap.c index 0d60e4f0af66..a900181e3867 100644 --- a/arch/arm64/kvm/regmap.c +++ b/arch/arm64/kvm/regmap.c @@ -178,13 +178,18 @@ void vcpu_write_spsr32(struct kvm_vcpu *vcpu, unsigned long v) switch (spsr_idx) { case KVM_SPSR_SVC: write_sysreg_el1(v, SYS_SPSR); + break; case KVM_SPSR_ABT: write_sysreg(v, spsr_abt); + break; case KVM_SPSR_UND: write_sysreg(v, spsr_und); + break; case KVM_SPSR_IRQ: write_sysreg(v, spsr_irq); + break; case KVM_SPSR_FIQ: write_sysreg(v, spsr_fiq); + break; } } -- cgit From 1a8248c74c81a15a32dc3344fb5c622e19072791 Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Fri, 26 Jul 2019 13:28:31 +0200 Subject: KVM: arm: vgic-v3: Mark expected switch fall-through MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When fall-through warnings was enabled by default the following warnings was starting to show up: ../virt/kvm/arm/hyp/vgic-v3-sr.c: In function ‘__vgic_v3_save_aprs’: ../virt/kvm/arm/hyp/vgic-v3-sr.c:351:24: warning: this statement may fall through [-Wimplicit-fallthrough=] cpu_if->vgic_ap0r[2] = __vgic_v3_read_ap0rn(2); ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ ../virt/kvm/arm/hyp/vgic-v3-sr.c:352:2: note: here case 6: ^~~~ ../virt/kvm/arm/hyp/vgic-v3-sr.c:353:24: warning: this statement may fall through [-Wimplicit-fallthrough=] cpu_if->vgic_ap0r[1] = __vgic_v3_read_ap0rn(1); ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ ../virt/kvm/arm/hyp/vgic-v3-sr.c:354:2: note: here default: ^~~~~~~ Rework so that the compiler doesn't warn about fall-through. Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning") Signed-off-by: Anders Roxell Signed-off-by: Marc Zyngier --- virt/kvm/arm/hyp/vgic-v3-sr.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/virt/kvm/arm/hyp/vgic-v3-sr.c b/virt/kvm/arm/hyp/vgic-v3-sr.c index 254c5f190a3d..ccf1fde9836c 100644 --- a/virt/kvm/arm/hyp/vgic-v3-sr.c +++ b/virt/kvm/arm/hyp/vgic-v3-sr.c @@ -349,8 +349,10 @@ void __hyp_text __vgic_v3_save_aprs(struct kvm_vcpu *vcpu) case 7: cpu_if->vgic_ap0r[3] = __vgic_v3_read_ap0rn(3); cpu_if->vgic_ap0r[2] = __vgic_v3_read_ap0rn(2); + /* Fall through */ case 6: cpu_if->vgic_ap0r[1] = __vgic_v3_read_ap0rn(1); + /* Fall through */ default: cpu_if->vgic_ap0r[0] = __vgic_v3_read_ap0rn(0); } @@ -359,8 +361,10 @@ void __hyp_text __vgic_v3_save_aprs(struct kvm_vcpu *vcpu) case 7: cpu_if->vgic_ap1r[3] = __vgic_v3_read_ap1rn(3); cpu_if->vgic_ap1r[2] = __vgic_v3_read_ap1rn(2); + /* Fall through */ case 6: cpu_if->vgic_ap1r[1] = __vgic_v3_read_ap1rn(1); + /* Fall through */ default: cpu_if->vgic_ap1r[0] = __vgic_v3_read_ap1rn(0); } @@ -382,8 +386,10 @@ void __hyp_text __vgic_v3_restore_aprs(struct kvm_vcpu *vcpu) case 7: __vgic_v3_write_ap0rn(cpu_if->vgic_ap0r[3], 3); __vgic_v3_write_ap0rn(cpu_if->vgic_ap0r[2], 2); + /* Fall through */ case 6: __vgic_v3_write_ap0rn(cpu_if->vgic_ap0r[1], 1); + /* Fall through */ default: __vgic_v3_write_ap0rn(cpu_if->vgic_ap0r[0], 0); } @@ -392,8 +398,10 @@ void __hyp_text __vgic_v3_restore_aprs(struct kvm_vcpu *vcpu) case 7: __vgic_v3_write_ap1rn(cpu_if->vgic_ap1r[3], 3); __vgic_v3_write_ap1rn(cpu_if->vgic_ap1r[2], 2); + /* Fall through */ case 6: __vgic_v3_write_ap1rn(cpu_if->vgic_ap1r[1], 1); + /* Fall through */ default: __vgic_v3_write_ap1rn(cpu_if->vgic_ap1r[0], 0); } -- cgit From 6701c619fa082e6660ecd7573fbad2177380c7cc Mon Sep 17 00:00:00 2001 From: Zenghui Yu Date: Sat, 13 Jul 2019 04:40:54 +0000 Subject: KVM: arm64: Update kvm_arm_exception_class and esr_class_str for new EC We've added two ESR exception classes for new ARM hardware extensions: ESR_ELx_EC_PAC and ESR_ELx_EC_SVE, but failed to update the strings used in tracing and other debug. Let's update "kvm_arm_exception_class" for these two EC, which the new EC will be visible to user-space via kvm_exit trace events Also update to "esr_class_str" for ESR_ELx_EC_PAC, by which we can get more readable debug info. Cc: Marc Zyngier Cc: Catalin Marinas Cc: Will Deacon Cc: Mark Rutland Cc: Dave Martin Reviewed-by: James Morse Signed-off-by: Zenghui Yu Signed-off-by: Marc Zyngier --- arch/arm64/include/asm/kvm_arm.h | 7 ++++--- arch/arm64/kernel/traps.c | 1 + 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index a8b205e5c4a8..ddf9d762ac62 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -316,9 +316,10 @@ #define kvm_arm_exception_class \ ECN(UNKNOWN), ECN(WFx), ECN(CP15_32), ECN(CP15_64), ECN(CP14_MR), \ - ECN(CP14_LS), ECN(FP_ASIMD), ECN(CP10_ID), ECN(CP14_64), ECN(SVC64), \ - ECN(HVC64), ECN(SMC64), ECN(SYS64), ECN(IMP_DEF), ECN(IABT_LOW), \ - ECN(IABT_CUR), ECN(PC_ALIGN), ECN(DABT_LOW), ECN(DABT_CUR), \ + ECN(CP14_LS), ECN(FP_ASIMD), ECN(CP10_ID), ECN(PAC), ECN(CP14_64), \ + ECN(SVC64), ECN(HVC64), ECN(SMC64), ECN(SYS64), ECN(SVE), \ + ECN(IMP_DEF), ECN(IABT_LOW), ECN(IABT_CUR), \ + ECN(PC_ALIGN), ECN(DABT_LOW), ECN(DABT_CUR), \ ECN(SP_ALIGN), ECN(FP_EXC32), ECN(FP_EXC64), ECN(SERROR), \ ECN(BREAKPT_LOW), ECN(BREAKPT_CUR), ECN(SOFTSTP_LOW), \ ECN(SOFTSTP_CUR), ECN(WATCHPT_LOW), ECN(WATCHPT_CUR), \ diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 8c03456dade6..969e1565152b 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -734,6 +734,7 @@ static const char *esr_class_str[] = { [ESR_ELx_EC_CP14_LS] = "CP14 LDC/STC", [ESR_ELx_EC_FP_ASIMD] = "ASIMD", [ESR_ELx_EC_CP10_ID] = "CP10 MRC/VMRS", + [ESR_ELx_EC_PAC] = "PAC", [ESR_ELx_EC_CP14_64] = "CP14 MCRR/MRRC", [ESR_ELx_EC_ILL] = "PSTATE.IL", [ESR_ELx_EC_SVC32] = "SVC (AArch32)", -- cgit From 820571af721990e354649368e641313f85a29976 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 26 Jul 2019 12:31:28 -0300 Subject: tools include UAPI: Sync x86's syscalls_64.tbl and generic unistd.h to pick up clone3 and pidfd_open MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 05a70a8ec287 ("unistd: protect clone3 via __ARCH_WANT_SYS_CLONE3") 8f3220a80654 ("arch: wire-up clone3() syscall") 7615d9e1780e ("arch: wire-up pidfd_open()") Silencing the following tools/perf build warnings Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h' diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl Now 'perf trace -e pidfd*,clone*' will trace those syscalls as well as the others with those prefixes. $ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.before /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c --- /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.before 2019-07-26 12:24:55.020944201 -0300 +++ /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c 2019-07-26 12:25:03.919047217 -0300 @@ -344,5 +344,7 @@ [431] = "fsconfig", [432] = "fsmount", [433] = "fspick", + [434] = "pidfd_open", + [435] = "clone3", }; -#define SYSCALLTBL_x86_64_MAX_ID 433 +#define SYSCALLTBL_x86_64_MAX_ID 435 $ Cc: Adrian Hunter Cc: Brendan Gregg Cc: Christian Brauner Cc: Jiri Olsa Cc: Luis Cláudio Gonçalves Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-0isnnqxtr1ihz6p8wzjiy47d@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/asm-generic/unistd.h | 8 +++++++- tools/perf/arch/x86/entry/syscalls/syscall_64.tbl | 2 ++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/tools/include/uapi/asm-generic/unistd.h b/tools/include/uapi/asm-generic/unistd.h index a87904daf103..1be0e798e362 100644 --- a/tools/include/uapi/asm-generic/unistd.h +++ b/tools/include/uapi/asm-generic/unistd.h @@ -844,9 +844,15 @@ __SYSCALL(__NR_fsconfig, sys_fsconfig) __SYSCALL(__NR_fsmount, sys_fsmount) #define __NR_fspick 433 __SYSCALL(__NR_fspick, sys_fspick) +#define __NR_pidfd_open 434 +__SYSCALL(__NR_pidfd_open, sys_pidfd_open) +#ifdef __ARCH_WANT_SYS_CLONE3 +#define __NR_clone3 435 +__SYSCALL(__NR_clone3, sys_clone3) +#endif #undef __NR_syscalls -#define __NR_syscalls 434 +#define __NR_syscalls 436 /* * 32 bit systems traditionally used different diff --git a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl index b4e6f9e6204a..c29976eca4a8 100644 --- a/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl +++ b/tools/perf/arch/x86/entry/syscalls/syscall_64.tbl @@ -355,6 +355,8 @@ 431 common fsconfig __x64_sys_fsconfig 432 common fsmount __x64_sys_fsmount 433 common fspick __x64_sys_fspick +434 common pidfd_open __x64_sys_pidfd_open +435 common clone3 __x64_sys_clone3/ptregs # # x32-specific system call numbers start at 512 to avoid cache impact -- cgit From e0d99c4d24fd8861da724b88ebd18a9fae8a2260 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 26 Jul 2019 12:43:23 -0300 Subject: tools headers UAPI: Update tools's copy of kvm.h headers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Picking the changes from: 66bb8a065f5a ("KVM: x86: PMU Event Filter") f087a02941fe ("KVM: nVMX: Stash L1's CR3 in vmcs01.GUEST_CR3 on nested entry w/o EPT") 99adb567632b ("KVM: arm/arm64: Add save/restore support for firmware workaround state") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h' diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h' diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Now 'perf trace' and other code that might use the tools/perf/trace/beauty autogenerated tables will be able to translate this new ioctl code into a string: $ tools/perf/trace/beauty/kvm_ioctl.sh > before $ $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h $ tools/perf/trace/beauty/kvm_ioctl.sh > after $ diff -u before after --- before 2019-07-26 12:32:47.959220236 -0300 +++ after 2019-07-26 12:33:05.766464871 -0300 @@ -79,6 +79,7 @@ [0xac] = "SET_ONE_REG", [0xad] = "KVMCLOCK_CTRL", [0xb0] = "GET_REG_LIST", + [0xb2] = "SET_PMU_EVENT_FILTER", [0xb7] = "SMI", [0xba] = "MEMORY_ENCRYPT_OP", [0xbb] = "MEMORY_ENCRYPT_REG_REGION", $ Cc: Adrian Hunter Cc: Andre Przywara Cc: Brendan Gregg Cc: Eric Hankland Cc: Jiri Olsa Cc: Luis Cláudio Gonçalves Cc: Marc Zyngier Cc: Namhyung Kim Cc: Paolo Bonzini Cc: Sean Christopherson Link: https://lkml.kernel.org/n/tip-py1gcmt6rboehlwg6zvagfg2@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/arm/include/uapi/asm/kvm.h | 12 ++++++++++++ tools/arch/arm64/include/uapi/asm/kvm.h | 10 ++++++++++ tools/arch/x86/include/uapi/asm/kvm.h | 22 ++++++++++++++++++---- tools/arch/x86/include/uapi/asm/vmx.h | 1 - tools/include/uapi/linux/kvm.h | 3 +++ 5 files changed, 43 insertions(+), 5 deletions(-) diff --git a/tools/arch/arm/include/uapi/asm/kvm.h b/tools/arch/arm/include/uapi/asm/kvm.h index 4602464ebdfb..a4217c1a5d01 100644 --- a/tools/arch/arm/include/uapi/asm/kvm.h +++ b/tools/arch/arm/include/uapi/asm/kvm.h @@ -214,6 +214,18 @@ struct kvm_vcpu_events { #define KVM_REG_ARM_FW_REG(r) (KVM_REG_ARM | KVM_REG_SIZE_U64 | \ KVM_REG_ARM_FW | ((r) & 0xffff)) #define KVM_REG_ARM_PSCI_VERSION KVM_REG_ARM_FW_REG(0) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1 KVM_REG_ARM_FW_REG(1) + /* Higher values mean better protection. */ +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL 0 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL 1 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED 2 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2 KVM_REG_ARM_FW_REG(2) + /* Higher values mean better protection. */ +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL 0 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN 1 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL 2 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED 3 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED (1U << 4) /* Device Control API: ARM VGIC */ #define KVM_DEV_ARM_VGIC_GRP_ADDR 0 diff --git a/tools/arch/arm64/include/uapi/asm/kvm.h b/tools/arch/arm64/include/uapi/asm/kvm.h index d819a3e8b552..9a507716ae2f 100644 --- a/tools/arch/arm64/include/uapi/asm/kvm.h +++ b/tools/arch/arm64/include/uapi/asm/kvm.h @@ -229,6 +229,16 @@ struct kvm_vcpu_events { #define KVM_REG_ARM_FW_REG(r) (KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \ KVM_REG_ARM_FW | ((r) & 0xffff)) #define KVM_REG_ARM_PSCI_VERSION KVM_REG_ARM_FW_REG(0) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1 KVM_REG_ARM_FW_REG(1) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL 0 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL 1 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED 2 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2 KVM_REG_ARM_FW_REG(2) +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL 0 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN 1 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL 2 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED 3 +#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED (1U << 4) /* SVE registers */ #define KVM_REG_ARM64_SVE (0x15 << KVM_REG_ARM_COPROC_SHIFT) diff --git a/tools/arch/x86/include/uapi/asm/kvm.h b/tools/arch/x86/include/uapi/asm/kvm.h index d6ab5b4d15e5..503d3f42da16 100644 --- a/tools/arch/x86/include/uapi/asm/kvm.h +++ b/tools/arch/x86/include/uapi/asm/kvm.h @@ -378,10 +378,11 @@ struct kvm_sync_regs { struct kvm_vcpu_events events; }; -#define KVM_X86_QUIRK_LINT0_REENABLED (1 << 0) -#define KVM_X86_QUIRK_CD_NW_CLEARED (1 << 1) -#define KVM_X86_QUIRK_LAPIC_MMIO_HOLE (1 << 2) -#define KVM_X86_QUIRK_OUT_7E_INC_RIP (1 << 3) +#define KVM_X86_QUIRK_LINT0_REENABLED (1 << 0) +#define KVM_X86_QUIRK_CD_NW_CLEARED (1 << 1) +#define KVM_X86_QUIRK_LAPIC_MMIO_HOLE (1 << 2) +#define KVM_X86_QUIRK_OUT_7E_INC_RIP (1 << 3) +#define KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT (1 << 4) #define KVM_STATE_NESTED_FORMAT_VMX 0 #define KVM_STATE_NESTED_FORMAT_SVM 1 /* unused */ @@ -432,4 +433,17 @@ struct kvm_nested_state { } data; }; +/* for KVM_CAP_PMU_EVENT_FILTER */ +struct kvm_pmu_event_filter { + __u32 action; + __u32 nevents; + __u32 fixed_counter_bitmap; + __u32 flags; + __u32 pad[4]; + __u64 events[0]; +}; + +#define KVM_PMU_EVENT_ALLOW 0 +#define KVM_PMU_EVENT_DENY 1 + #endif /* _ASM_X86_KVM_H */ diff --git a/tools/arch/x86/include/uapi/asm/vmx.h b/tools/arch/x86/include/uapi/asm/vmx.h index d213ec5c3766..f0b0c90dd398 100644 --- a/tools/arch/x86/include/uapi/asm/vmx.h +++ b/tools/arch/x86/include/uapi/asm/vmx.h @@ -146,7 +146,6 @@ #define VMX_ABORT_SAVE_GUEST_MSR_FAIL 1 #define VMX_ABORT_LOAD_HOST_PDPTE_FAIL 2 -#define VMX_ABORT_VMCS_CORRUPTED 3 #define VMX_ABORT_LOAD_HOST_MSR_FAIL 4 #endif /* _UAPIVMX_H */ diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h index c2152f3dd02d..a7c19540ce21 100644 --- a/tools/include/uapi/linux/kvm.h +++ b/tools/include/uapi/linux/kvm.h @@ -995,6 +995,7 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_ARM_SVE 170 #define KVM_CAP_ARM_PTRAUTH_ADDRESS 171 #define KVM_CAP_ARM_PTRAUTH_GENERIC 172 +#define KVM_CAP_PMU_EVENT_FILTER 173 #ifdef KVM_CAP_IRQ_ROUTING @@ -1329,6 +1330,8 @@ struct kvm_s390_ucas_mapping { #define KVM_PPC_GET_RMMU_INFO _IOW(KVMIO, 0xb0, struct kvm_ppc_rmmu_info) /* Available with KVM_CAP_PPC_GET_CPU_CHAR */ #define KVM_PPC_GET_CPU_CHAR _IOR(KVMIO, 0xb1, struct kvm_ppc_cpu_char) +/* Available with KVM_CAP_PMU_EVENT_FILTER */ +#define KVM_SET_PMU_EVENT_FILTER _IOW(KVMIO, 0xb2, struct kvm_pmu_event_filter) /* ioctl for vm fd */ #define KVM_CREATE_DEVICE _IOWR(KVMIO, 0xe0, struct kvm_create_device) -- cgit From 9a07406b00cdc6ec689dc142540739575c717f3c Mon Sep 17 00:00:00 2001 From: Bob Ham Date: Wed, 24 Jul 2019 07:52:27 -0700 Subject: net: usb: qmi_wwan: Add the BroadMobi BM818 card The BroadMobi BM818 M.2 card uses the QMI protocol Signed-off-by: Bob Ham Signed-off-by: Angus Ainslie (Purism) Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 69e0a2acfcb0..b6dc5d714b5e 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1295,6 +1295,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x2001, 0x7e3d, 4)}, /* D-Link DWM-222 A2 */ {QMI_FIXED_INTF(0x2020, 0x2031, 4)}, /* Olicard 600 */ {QMI_FIXED_INTF(0x2020, 0x2033, 4)}, /* BroadMobi BM806U */ + {QMI_FIXED_INTF(0x2020, 0x2060, 4)}, /* BroadMobi BM818 */ {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */ {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */ {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */ -- cgit From 81af04b432fdfabcdbd2c06be2ee647e3ca41a22 Mon Sep 17 00:00:00 2001 From: Michal Kalderon Date: Thu, 25 Jul 2019 13:59:55 +0300 Subject: qed: RDMA - Fix the hw_ver returned in device attributes The hw_ver field was initialized to zero. Return the chip revision. This is relevant for rdma driver. Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_rdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c index 17c64e43d6c3..158ac0738911 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c +++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c @@ -442,7 +442,7 @@ static void qed_rdma_init_devinfo(struct qed_hwfn *p_hwfn, /* Vendor specific information */ dev->vendor_id = cdev->vendor_id; dev->vendor_part_id = cdev->device_id; - dev->hw_ver = 0; + dev->hw_ver = cdev->chip_rev; dev->fw_ver = (FW_MAJOR_VERSION << 24) | (FW_MINOR_VERSION << 16) | (FW_REVISION_VERSION << 8) | (FW_ENGINEERING_VERSION); -- cgit From c5d139697d5d9ecf9c7cd92d7d7838a173508900 Mon Sep 17 00:00:00 2001 From: Claudiu Manoil Date: Thu, 25 Jul 2019 16:33:18 +0300 Subject: ocelot: Cancel delayed work before wq destruction Make sure the delayed work for stats update is not pending before wq destruction. This fixes the module unload path. The issue is there since day 1. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Claudiu Manoil Reviewed-by: Alexandre Belloni Signed-off-by: David S. Miller --- drivers/net/ethernet/mscc/ocelot.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index b71e4ecbe469..6932e615d4b0 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -1818,6 +1818,7 @@ EXPORT_SYMBOL(ocelot_init); void ocelot_deinit(struct ocelot *ocelot) { + cancel_delayed_work(&ocelot->stats_work); destroy_workqueue(ocelot->stats_queue); mutex_destroy(&ocelot->stats_lock); ocelot_ace_deinit(); -- cgit From 01f5bffad555f8e22a61f4b1261fe09cf1b96994 Mon Sep 17 00:00:00 2001 From: Haishuang Yan Date: Fri, 26 Jul 2019 00:40:17 +0800 Subject: ip6_tunnel: fix possible use-after-free on xmit ip4ip6/ip6ip6 tunnels run iptunnel_handle_offloads on xmit which can cause a possible use-after-free accessing iph/ipv6h pointer since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb. Fixes: 0e9a709560db ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets") Signed-off-by: Haishuang Yan Signed-off-by: David S. Miller --- net/ipv6/ip6_tunnel.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 3134fbb65d7f..754a484d35df 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1278,12 +1278,11 @@ ip4ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev) } fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL); + dsfield = INET_ECN_encapsulate(dsfield, ipv4_get_dsfield(iph)); if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6)) return -1; - dsfield = INET_ECN_encapsulate(dsfield, ipv4_get_dsfield(iph)); - skb_set_inner_ipproto(skb, IPPROTO_IPIP); err = ip6_tnl_xmit(skb, dev, dsfield, &fl6, encap_limit, &mtu, @@ -1367,12 +1366,11 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev) } fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL); + dsfield = INET_ECN_encapsulate(dsfield, ipv6_get_dsfield(ipv6h)); if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6)) return -1; - dsfield = INET_ECN_encapsulate(dsfield, ipv6_get_dsfield(ipv6h)); - skb_set_inner_ipproto(skb, IPPROTO_IPV6); err = ip6_tnl_xmit(skb, dev, dsfield, &fl6, encap_limit, &mtu, -- cgit From a7cf3d24ee6081930feb4c830a7f6f16ebe31c49 Mon Sep 17 00:00:00 2001 From: Subash Abhinov Kasiviswanathan Date: Thu, 25 Jul 2019 12:07:12 -0600 Subject: net: qualcomm: rmnet: Fix incorrect UL checksum offload logic The udp_ip4_ind bit is set only for IPv4 UDP non-fragmented packets so that the hardware can flip the checksum to 0xFFFF if the computed checksum is 0 per RFC768. However, this bit had to be set for IPv6 UDP non fragmented packets as well per hardware requirements. Otherwise, IPv6 UDP packets with computed checksum as 0 were transmitted by hardware and were dropped in the network. In addition to setting this bit for IPv6 UDP, the field is also appropriately renamed to udp_ind as part of this change. Fixes: 5eb5f8608ef1 ("net: qualcomm: rmnet: Add support for TX checksum offload") Cc: Sean Tranchetti Signed-off-by: Subash Abhinov Kasiviswanathan Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c | 13 +++++++++---- include/linux/if_rmnet.h | 4 ++-- 2 files changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c index 60189923737a..21d38167f961 100644 --- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c +++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c @@ -206,9 +206,9 @@ rmnet_map_ipv4_ul_csum_header(void *iphdr, ul_header->csum_insert_offset = skb->csum_offset; ul_header->csum_enabled = 1; if (ip4h->protocol == IPPROTO_UDP) - ul_header->udp_ip4_ind = 1; + ul_header->udp_ind = 1; else - ul_header->udp_ip4_ind = 0; + ul_header->udp_ind = 0; /* Changing remaining fields to network order */ hdr++; @@ -239,6 +239,7 @@ rmnet_map_ipv6_ul_csum_header(void *ip6hdr, struct rmnet_map_ul_csum_header *ul_header, struct sk_buff *skb) { + struct ipv6hdr *ip6h = (struct ipv6hdr *)ip6hdr; __be16 *hdr = (__be16 *)ul_header, offset; offset = htons((__force u16)(skb_transport_header(skb) - @@ -246,7 +247,11 @@ rmnet_map_ipv6_ul_csum_header(void *ip6hdr, ul_header->csum_start_offset = offset; ul_header->csum_insert_offset = skb->csum_offset; ul_header->csum_enabled = 1; - ul_header->udp_ip4_ind = 0; + + if (ip6h->nexthdr == IPPROTO_UDP) + ul_header->udp_ind = 1; + else + ul_header->udp_ind = 0; /* Changing remaining fields to network order */ hdr++; @@ -419,7 +424,7 @@ sw_csum: ul_header->csum_start_offset = 0; ul_header->csum_insert_offset = 0; ul_header->csum_enabled = 0; - ul_header->udp_ip4_ind = 0; + ul_header->udp_ind = 0; priv->stats.csum_sw++; } diff --git a/include/linux/if_rmnet.h b/include/linux/if_rmnet.h index b4f5403383fc..9661416a9bb4 100644 --- a/include/linux/if_rmnet.h +++ b/include/linux/if_rmnet.h @@ -41,11 +41,11 @@ struct rmnet_map_ul_csum_header { __be16 csum_start_offset; #if defined(__LITTLE_ENDIAN_BITFIELD) u16 csum_insert_offset:14; - u16 udp_ip4_ind:1; + u16 udp_ind:1; u16 csum_enabled:1; #elif defined (__BIG_ENDIAN_BITFIELD) u16 csum_enabled:1; - u16 udp_ip4_ind:1; + u16 udp_ind:1; u16 csum_insert_offset:14; #else #error "Please fix " -- cgit From 543b8c468f55f27f3c0178a22a91a51aabbbc428 Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Wed, 17 Jul 2019 18:31:53 -0700 Subject: f2fs: fix to read source block before invalidating it f2fs_allocate_data_block() invalidates old block address and enable new block address. Then, if we try to read old block by f2fs_submit_page_bio(), it will give WARN due to reading invalid blocks. Let's make the order sanely back. Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim --- fs/f2fs/gc.c | 70 +++++++++++++++++++++++++++++------------------------------- 1 file changed, 34 insertions(+), 36 deletions(-) diff --git a/fs/f2fs/gc.c b/fs/f2fs/gc.c index 6691f526fa40..8974672db78f 100644 --- a/fs/f2fs/gc.c +++ b/fs/f2fs/gc.c @@ -796,6 +796,29 @@ static int move_data_block(struct inode *inode, block_t bidx, if (lfs_mode) down_write(&fio.sbi->io_order_lock); + mpage = f2fs_grab_cache_page(META_MAPPING(fio.sbi), + fio.old_blkaddr, false); + if (!mpage) + goto up_out; + + fio.encrypted_page = mpage; + + /* read source block in mpage */ + if (!PageUptodate(mpage)) { + err = f2fs_submit_page_bio(&fio); + if (err) { + f2fs_put_page(mpage, 1); + goto up_out; + } + lock_page(mpage); + if (unlikely(mpage->mapping != META_MAPPING(fio.sbi) || + !PageUptodate(mpage))) { + err = -EIO; + f2fs_put_page(mpage, 1); + goto up_out; + } + } + f2fs_allocate_data_block(fio.sbi, NULL, fio.old_blkaddr, &newaddr, &sum, CURSEG_COLD_DATA, NULL, false); @@ -803,44 +826,18 @@ static int move_data_block(struct inode *inode, block_t bidx, newaddr, FGP_LOCK | FGP_CREAT, GFP_NOFS); if (!fio.encrypted_page) { err = -ENOMEM; - goto recover_block; - } - - mpage = f2fs_pagecache_get_page(META_MAPPING(fio.sbi), - fio.old_blkaddr, FGP_LOCK, GFP_NOFS); - if (mpage) { - bool updated = false; - - if (PageUptodate(mpage)) { - memcpy(page_address(fio.encrypted_page), - page_address(mpage), PAGE_SIZE); - updated = true; - } f2fs_put_page(mpage, 1); - invalidate_mapping_pages(META_MAPPING(fio.sbi), - fio.old_blkaddr, fio.old_blkaddr); - if (updated) - goto write_page; - } - - err = f2fs_submit_page_bio(&fio); - if (err) - goto put_page_out; - - /* write page */ - lock_page(fio.encrypted_page); - - if (unlikely(fio.encrypted_page->mapping != META_MAPPING(fio.sbi))) { - err = -EIO; - goto put_page_out; - } - if (unlikely(!PageUptodate(fio.encrypted_page))) { - err = -EIO; - goto put_page_out; + goto recover_block; } -write_page: + /* write target block */ f2fs_wait_on_page_writeback(fio.encrypted_page, DATA, true, true); + memcpy(page_address(fio.encrypted_page), + page_address(mpage), PAGE_SIZE); + f2fs_put_page(mpage, 1); + invalidate_mapping_pages(META_MAPPING(fio.sbi), + fio.old_blkaddr, fio.old_blkaddr); + set_page_dirty(fio.encrypted_page); if (clear_page_dirty_for_io(fio.encrypted_page)) dec_page_count(fio.sbi, F2FS_DIRTY_META); @@ -871,11 +868,12 @@ write_page: put_page_out: f2fs_put_page(fio.encrypted_page, 1); recover_block: - if (lfs_mode) - up_write(&fio.sbi->io_order_lock); if (err) f2fs_do_replace_block(fio.sbi, &sum, newaddr, fio.old_blkaddr, true, true); +up_out: + if (lfs_mode) + up_write(&fio.sbi->io_order_lock); put_out: f2fs_put_dnode(&dn); out: -- cgit From 74bf71ed792ab0f64631cc65ccdb54c356c36d45 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Fri, 26 Jul 2019 23:47:02 +0200 Subject: ALSA: hda: Fix 1-minute detection delay when i915 module is not available Distribution installation images such as Debian include different sets of modules which can be downloaded dynamically. Such images may notably include the hda sound modules but not the i915 DRM module, even if the latter was enabled at build time, as reported on https://bugs.debian.org/931507 In such a case hdac_i915 would be linked in and try to load the i915 module, fail since it is not there, but still wait for a whole minute before giving up binding with it. This fixes such as case by only waiting for the binding if the module was properly loaded (or module support is disabled, in which case i915 is already compiled-in anyway). Fixes: f9b54e1961c7 ("ALSA: hda/i915: Allow delayed i915 audio component binding") Signed-off-by: Samuel Thibault Cc: Signed-off-by: Takashi Iwai --- sound/hda/hdac_i915.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/sound/hda/hdac_i915.c b/sound/hda/hdac_i915.c index 1192c7561d62..3c2db3816029 100644 --- a/sound/hda/hdac_i915.c +++ b/sound/hda/hdac_i915.c @@ -136,10 +136,12 @@ int snd_hdac_i915_init(struct hdac_bus *bus) if (!acomp) return -ENODEV; if (!acomp->ops) { - request_module("i915"); - /* 60s timeout */ - wait_for_completion_timeout(&bind_complete, - msecs_to_jiffies(60 * 1000)); + if (!IS_ENABLED(CONFIG_MODULES) || + !request_module("i915")) { + /* 60s timeout */ + wait_for_completion_timeout(&bind_complete, + msecs_to_jiffies(60 * 1000)); + } } if (!acomp->ops) { dev_info(bus->dev, "couldn't bind with audio component\n"); -- cgit From 41e6ada93356400ec8bc8dba04818d9e30ee6e9d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 26 Jul 2019 08:47:22 -0300 Subject: docs: generic-counter.rst: fix broken references for ABI file There are two references to the generic counter ABI, with was added on a separate patch. Both point to a non-existing file. Fix them. Fixes: ea2b23b89579 ("counter: Documentation: Add Generic Counter sysfs documentation") Fixes: 09e7d4ed8991 ("docs: Add Generic Counter interface documentation") Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jonathan Cameron --- Documentation/driver-api/generic-counter.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/driver-api/generic-counter.rst b/Documentation/driver-api/generic-counter.rst index 0c161b1a3be6..8382f01a53e3 100644 --- a/Documentation/driver-api/generic-counter.rst +++ b/Documentation/driver-api/generic-counter.rst @@ -233,7 +233,7 @@ Userspace Interface Several sysfs attributes are generated by the Generic Counter interface, and reside under the /sys/bus/counter/devices/counterX directory, where counterX refers to the respective counter device. Please see -Documentation/ABI/testing/sys-bus-counter-generic-sysfs for detailed +Documentation/ABI/testing/sysfs-bus-counter for detailed information on each Generic Counter interface sysfs attribute. Through these sysfs attributes, programs and scripts may interact with @@ -325,7 +325,7 @@ sysfs attributes, where Y is the unique ID of the respective Count: For a more detailed breakdown of the available Generic Counter interface sysfs attributes, please refer to the -Documentation/ABI/testing/sys-bus-counter file. +Documentation/ABI/testing/sysfs-bus-counter file. The Signals and Counts associated with the Counter device are registered to the system as well by the counter_register function. The -- cgit From a0d57a552b836206ad7705a1060e6e1ce5a38203 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Fri, 26 Jul 2019 16:27:36 +0800 Subject: isdn: mISDN: hfcsusb: Fix possible null-pointer dereferences in start_isoc_chain() In start_isoc_chain(), usb_alloc_urb() on line 1392 may fail and return NULL. At this time, fifo->iso[i].urb is assigned to NULL. Then, fifo->iso[i].urb is used at some places, such as: LINE 1405: fill_isoc_urb(fifo->iso[i].urb, ...) urb->number_of_packets = num_packets; urb->transfer_flags = URB_ISO_ASAP; urb->actual_length = 0; urb->interval = interval; LINE 1416: fifo->iso[i].urb->... LINE 1419: fifo->iso[i].urb->... Thus, possible null-pointer dereferences may occur. To fix these bugs, "continue" is added to avoid using fifo->iso[i].urb when it is NULL. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- drivers/isdn/hardware/mISDN/hfcsusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c index 0e224232f746..8fb7c5dea07f 100644 --- a/drivers/isdn/hardware/mISDN/hfcsusb.c +++ b/drivers/isdn/hardware/mISDN/hfcsusb.c @@ -1394,6 +1394,7 @@ start_isoc_chain(struct usb_fifo *fifo, int num_packets_per_urb, printk(KERN_DEBUG "%s: %s: alloc urb for fifo %i failed", hw->name, __func__, fifo->fifonum); + continue; } fifo->iso[i].owner_fifo = (struct usb_fifo *) fifo; fifo->iso[i].indx = i; -- cgit From 90c6260c1905a68fb596844087f2223bd4657fee Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 18 Jul 2019 15:57:49 +0200 Subject: iio: adc: gyroadc: fix uninitialized return code gcc-9 complains about a blatant uninitialized variable use that all earlier compiler versions missed: drivers/iio/adc/rcar-gyroadc.c:510:5: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized] Return -EINVAL instead here and a few lines above it where we accidentally return 0 on failure. Cc: stable@vger.kernel.org Fixes: 059c53b32329 ("iio: adc: Add Renesas GyroADC driver") Signed-off-by: Arnd Bergmann Reviewed-by: Wolfram Sang Signed-off-by: Jonathan Cameron --- drivers/iio/adc/rcar-gyroadc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/rcar-gyroadc.c b/drivers/iio/adc/rcar-gyroadc.c index 2d685730f867..c37f201294b2 100644 --- a/drivers/iio/adc/rcar-gyroadc.c +++ b/drivers/iio/adc/rcar-gyroadc.c @@ -382,7 +382,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev) dev_err(dev, "Only %i channels supported with %pOFn, but reg = <%i>.\n", num_channels, child, reg); - return ret; + return -EINVAL; } } @@ -391,7 +391,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev) dev_err(dev, "Channel %i uses different ADC mode than the rest.\n", reg); - return ret; + return -EINVAL; } /* Channel is valid, grab the regulator. */ -- cgit From c7ba50fe2399f0621fae39eb6f5e6abfbb83c38d Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Fri, 26 Jul 2019 22:17:05 +0800 Subject: net: rds: Fix possible null-pointer dereferences in rds_rdma_cm_event_handler_cmn() In rds_rdma_cm_event_handler_cmn(), there are some if statements to check whether conn is NULL, such as on lines 65, 96 and 112. But conn is not checked before being used on line 108: trans->cm_connect_complete(conn, event); and on lines 140-143: rdsdebug("DISCONNECT event - dropping connection " "%pI6c->%pI6c\n", &conn->c_laddr, &conn->c_faddr); rds_conn_drop(conn); Thus, possible null-pointer dereferences may occur. To fix these bugs, conn is checked before being used. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai Acked-by: Santosh Shilimkar Signed-off-by: David S. Miller --- net/rds/rdma_transport.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/rds/rdma_transport.c b/net/rds/rdma_transport.c index ff74c4bbb9fc..9986d6065c4d 100644 --- a/net/rds/rdma_transport.c +++ b/net/rds/rdma_transport.c @@ -105,7 +105,8 @@ static int rds_rdma_cm_event_handler_cmn(struct rdma_cm_id *cm_id, break; case RDMA_CM_EVENT_ESTABLISHED: - trans->cm_connect_complete(conn, event); + if (conn) + trans->cm_connect_complete(conn, event); break; case RDMA_CM_EVENT_REJECTED: @@ -137,6 +138,8 @@ static int rds_rdma_cm_event_handler_cmn(struct rdma_cm_id *cm_id, break; case RDMA_CM_EVENT_DISCONNECTED: + if (!conn) + break; rdsdebug("DISCONNECT event - dropping connection " "%pI6c->%pI6c\n", &conn->c_laddr, &conn->c_faddr); -- cgit From 3db1fa8bb489370b6df634a3d548728294139d66 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Sat, 27 Jul 2019 00:05:41 +0200 Subject: gigaset: stop maintaining seperately The Dutch consumer grade ISDN network will be shut down on September 1, 2019. This means I'll be converted to some sort of VOIP shortly. At that point it would be unwise to try to maintain the gigaset driver, even for odd fixes as I do. So I'll stop maintaining it as a seperate driver and bump support to CAPI in staging. De facto this means the driver will be unmaintained, since no-one seems to be working on CAPI. I've lighty tested the hardware specific modules of this driver (bas-gigaset, ser-gigaset, and usb-gigaset) for v5.3-rc1. The basic functionality appears to be working. It's unclear whether anyone still cares. I'm aware of only one person sort of using the driver a few years ago. Thanks to Karsten Keil for the ISDN subsystems gigaset was using (I4L and CAPI). And many thanks to Hansjoerg Lipp and Tilman Schmidt for writing and upstreaming this driver. Signed-off-by: Paul Bolle Signed-off-by: David S. Miller --- MAINTAINERS | 7 ------- 1 file changed, 7 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 3ff2e6ab3cf4..bbc2efb2b236 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6822,13 +6822,6 @@ F: Documentation/filesystems/gfs2*.txt F: fs/gfs2/ F: include/uapi/linux/gfs2_ondisk.h -GIGASET ISDN DRIVERS -M: Paul Bolle -L: gigaset307x-common@lists.sourceforge.net -W: http://gigaset307x.sourceforge.net/ -S: Odd Fixes -F: drivers/staging/isdn/gigaset/ - GNSS SUBSYSTEM M: Johan Hovold T: git git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss.git -- cgit From 8aace4f3eba2a3ceb431e18683ea0e1ecbade5cd Mon Sep 17 00:00:00 2001 From: René van Dorst Date: Sat, 27 Jul 2019 11:40:11 +0200 Subject: net: phylink: Fix flow control for fixed-link MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In phylink_parse_fixedlink() the pl->link_config.advertising bits are AND with pl->supported, pl->supported is zeroed and only the speed/duplex modes and MII bits are set. So pl->link_config.advertising always loses the flow control/pause bits. By setting Pause and Asym_Pause bits in pl->supported, the flow control work again when devicetree "pause" is set in fixes-link node and the MAC advertise that is supports pause. Results with this patch. Legend: - DT = 'Pause' is set in the fixed-link in devicetree. - validate() = ‘Yes’ means phylink_set(mask, Pause) is set in the validate(). - flow = results reported my link is Up line. +-----+------------+-------+ | DT | validate() | flow | +-----+------------+-------+ | Yes | Yes | rx/tx | | No | Yes | off | | Yes | No | off | +-----+------------+-------+ Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: René van Dorst Acked-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/phylink.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index b45862465c4d..a45c5de96ab1 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -216,6 +216,8 @@ static int phylink_parse_fixedlink(struct phylink *pl, pl->supported, true); linkmode_zero(pl->supported); phylink_set(pl->supported, MII); + phylink_set(pl->supported, Pause); + phylink_set(pl->supported, Asym_Pause); if (s) { __set_bit(s->bit, pl->supported); } else { -- cgit From 66058b1ca5651c7671bf2ba27fcf6907fb20bd0b Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sat, 27 Jul 2019 12:32:28 +0200 Subject: Revert ("r8169: remove 1000/Half from supported modes") This reverts commit a6851c613fd7fccc5d1f28d5d8a0cbe9b0f4e8cc. It was reported that RTL8111b successfully finishes 1000/Full autoneg but no data flows. Reverting the original patch fixes the issue. It seems to be a HW issue with the integrated RTL8211B PHY. This PHY version used also e.g. on RTL8168d, so better revert the original patch. Reported-by: Bernhard Held Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169_main.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 6272115b2848..a71dd669a728 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -6136,10 +6136,7 @@ static int r8169_phy_connect(struct rtl8169_private *tp) if (ret) return ret; - if (tp->supports_gmii) - phy_remove_link_mode(phydev, - ETHTOOL_LINK_MODE_1000baseT_Half_BIT); - else + if (!tp->supports_gmii) phy_set_max_speed(phydev, SPEED_100); phy_support_asym_pause(phydev); -- cgit From 003bd5b4a7b4a94b501e3a1e2e7c9df6b2a94ed4 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sat, 27 Jul 2019 12:43:31 +0200 Subject: r8169: don't use MSI before RTL8168d MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It was reported that after resuming from suspend network fails with error "do_IRQ: 3.38 No irq handler for vector", see [0]. Enabling WoL can work around the issue, but the only actual fix is to disable MSI. So let's mimic the behavior of the vendor driver and disable MSI on all chip versions before RTL8168d. [0] https://bugzilla.kernel.org/show_bug.cgi?id=204079 Fixes: 6c6aa15fdea5 ("r8169: improve interrupt handling") Reported-by: Dušan Dragić Tested-by: Dušan Dragić Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169_main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index a71dd669a728..e1dd6ea60d67 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -6586,13 +6586,18 @@ static int rtl_alloc_irq(struct rtl8169_private *tp) { unsigned int flags; - if (tp->mac_version <= RTL_GIGA_MAC_VER_06) { + switch (tp->mac_version) { + case RTL_GIGA_MAC_VER_02 ... RTL_GIGA_MAC_VER_06: rtl_unlock_config_regs(tp); RTL_W8(tp, Config2, RTL_R8(tp, Config2) & ~MSIEnable); rtl_lock_config_regs(tp); + /* fall through */ + case RTL_GIGA_MAC_VER_07 ... RTL_GIGA_MAC_VER_24: flags = PCI_IRQ_LEGACY; - } else { + break; + default: flags = PCI_IRQ_ALL_TYPES; + break; } return pci_alloc_irq_vectors(tp->pci_dev, 1, 1, flags); -- cgit From ffe0bbabb0cffceceae07484fde1ec2a63b1537c Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 8 Jul 2019 10:23:43 +0200 Subject: gpio: don't WARN() on NULL descs if gpiolib is disabled If gpiolib is disabled, we use the inline stubs from gpio/consumer.h instead of regular definitions of GPIO API. The stubs for 'optional' variants of gpiod_get routines return NULL in this case as if the relevant GPIO wasn't found. This is correct so far. Calling other (non-gpio_get) stubs from this header triggers a warning because the GPIO descriptor couldn't have been requested. The warning however is unconditional (WARN_ON(1)) and is emitted even if the passed descriptor pointer is NULL. We don't want to force the users of 'optional' gpio_get to check the returned pointer before calling e.g. gpiod_set_value() so let's only WARN on non-NULL descriptors. Cc: stable@vger.kernel.org Reported-by: Claus H. Stovgaard Signed-off-by: Bartosz Golaszewski --- include/linux/gpio/consumer.h | 64 +++++++++++++++++++++---------------------- 1 file changed, 32 insertions(+), 32 deletions(-) diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h index 9ddcf50a3c59..a7f08fb0f865 100644 --- a/include/linux/gpio/consumer.h +++ b/include/linux/gpio/consumer.h @@ -247,7 +247,7 @@ static inline void gpiod_put(struct gpio_desc *desc) might_sleep(); /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); } static inline void devm_gpiod_unhinge(struct device *dev, @@ -256,7 +256,7 @@ static inline void devm_gpiod_unhinge(struct device *dev, might_sleep(); /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); } static inline void gpiod_put_array(struct gpio_descs *descs) @@ -264,7 +264,7 @@ static inline void gpiod_put_array(struct gpio_descs *descs) might_sleep(); /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(descs); } static inline struct gpio_desc *__must_check @@ -317,7 +317,7 @@ static inline void devm_gpiod_put(struct device *dev, struct gpio_desc *desc) might_sleep(); /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); } static inline void devm_gpiod_put_array(struct device *dev, @@ -326,32 +326,32 @@ static inline void devm_gpiod_put_array(struct device *dev, might_sleep(); /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(descs); } static inline int gpiod_get_direction(const struct gpio_desc *desc) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); return -ENOSYS; } static inline int gpiod_direction_input(struct gpio_desc *desc) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); return -ENOSYS; } static inline int gpiod_direction_output(struct gpio_desc *desc, int value) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); return -ENOSYS; } static inline int gpiod_direction_output_raw(struct gpio_desc *desc, int value) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); return -ENOSYS; } @@ -359,7 +359,7 @@ static inline int gpiod_direction_output_raw(struct gpio_desc *desc, int value) static inline int gpiod_get_value(const struct gpio_desc *desc) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); return 0; } static inline int gpiod_get_array_value(unsigned int array_size, @@ -368,13 +368,13 @@ static inline int gpiod_get_array_value(unsigned int array_size, unsigned long *value_bitmap) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc_array); return 0; } static inline void gpiod_set_value(struct gpio_desc *desc, int value) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); } static inline int gpiod_set_array_value(unsigned int array_size, struct gpio_desc **desc_array, @@ -382,13 +382,13 @@ static inline int gpiod_set_array_value(unsigned int array_size, unsigned long *value_bitmap) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc_array); return 0; } static inline int gpiod_get_raw_value(const struct gpio_desc *desc) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); return 0; } static inline int gpiod_get_raw_array_value(unsigned int array_size, @@ -397,13 +397,13 @@ static inline int gpiod_get_raw_array_value(unsigned int array_size, unsigned long *value_bitmap) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc_array); return 0; } static inline void gpiod_set_raw_value(struct gpio_desc *desc, int value) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); } static inline int gpiod_set_raw_array_value(unsigned int array_size, struct gpio_desc **desc_array, @@ -411,14 +411,14 @@ static inline int gpiod_set_raw_array_value(unsigned int array_size, unsigned long *value_bitmap) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc_array); return 0; } static inline int gpiod_get_value_cansleep(const struct gpio_desc *desc) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); return 0; } static inline int gpiod_get_array_value_cansleep(unsigned int array_size, @@ -427,13 +427,13 @@ static inline int gpiod_get_array_value_cansleep(unsigned int array_size, unsigned long *value_bitmap) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc_array); return 0; } static inline void gpiod_set_value_cansleep(struct gpio_desc *desc, int value) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); } static inline int gpiod_set_array_value_cansleep(unsigned int array_size, struct gpio_desc **desc_array, @@ -441,13 +441,13 @@ static inline int gpiod_set_array_value_cansleep(unsigned int array_size, unsigned long *value_bitmap) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc_array); return 0; } static inline int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); return 0; } static inline int gpiod_get_raw_array_value_cansleep(unsigned int array_size, @@ -456,14 +456,14 @@ static inline int gpiod_get_raw_array_value_cansleep(unsigned int array_size, unsigned long *value_bitmap) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc_array); return 0; } static inline void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); } static inline int gpiod_set_raw_array_value_cansleep(unsigned int array_size, struct gpio_desc **desc_array, @@ -471,41 +471,41 @@ static inline int gpiod_set_raw_array_value_cansleep(unsigned int array_size, unsigned long *value_bitmap) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc_array); return 0; } static inline int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); return -ENOSYS; } static inline int gpiod_set_transitory(struct gpio_desc *desc, bool transitory) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); return -ENOSYS; } static inline int gpiod_is_active_low(const struct gpio_desc *desc) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); return 0; } static inline int gpiod_cansleep(const struct gpio_desc *desc) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); return 0; } static inline int gpiod_to_irq(const struct gpio_desc *desc) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); return -EINVAL; } @@ -513,7 +513,7 @@ static inline int gpiod_set_consumer_name(struct gpio_desc *desc, const char *name) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); return -EINVAL; } @@ -525,7 +525,7 @@ static inline struct gpio_desc *gpio_to_desc(unsigned gpio) static inline int desc_to_gpio(const struct gpio_desc *desc) { /* GPIO can never have been requested */ - WARN_ON(1); + WARN_ON(desc); return -EINVAL; } -- cgit From 25e5ef302c24a6fead369c0cfe88c073d7b97ca8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 28 Jul 2019 18:41:38 +0200 Subject: eeprom: at24: make spd world-readable again The integration of the at24 driver into the nvmem framework broke the world-readability of spd EEPROMs. Fix it. Signed-off-by: Jean Delvare Cc: stable@vger.kernel.org Fixes: 57d155506dd5 ("eeprom: at24: extend driver to plug into the NVMEM framework") Cc: Andrew Lunn Cc: Srinivas Kandagatla Cc: Greg Kroah-Hartman Cc: Bartosz Golaszewski Cc: Arnd Bergmann Signed-off-by: Bartosz Golaszewski --- drivers/misc/eeprom/at24.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 35bf2477693d..518945b2f737 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -685,7 +685,7 @@ static int at24_probe(struct i2c_client *client) nvmem_config.name = dev_name(dev); nvmem_config.dev = dev; nvmem_config.read_only = !writable; - nvmem_config.root_only = true; + nvmem_config.root_only = !(flags & AT24_FLAG_IRUGO); nvmem_config.owner = THIS_MODULE; nvmem_config.compat = true; nvmem_config.base_dev = dev; -- cgit From f36cf386e3fec258a341d446915862eded3e13d8 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 17 Jul 2019 21:18:59 +0200 Subject: x86/speculation/swapgs: Exclude ATOMs from speculation through SWAPGS Intel provided the following information: On all current Atom processors, instructions that use a segment register value (e.g. a load or store) will not speculatively execute before the last writer of that segment retires. Thus they will not use a speculatively written segment value. That means on ATOMs there is no speculation through SWAPGS, so the SWAPGS entry paths can be excluded from the extra LFENCE if PTI is disabled. Create a separate bug flag for the through SWAPGS speculation and mark all out-of-order ATOMs and AMD/HYGON CPUs as not affected. The in-order ATOMs are excluded from the whole mitigation mess anyway. Reported-by: Andrew Cooper Signed-off-by: Thomas Gleixner Reviewed-by: Tyler Hicks Reviewed-by: Josh Poimboeuf --- arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/kernel/cpu/bugs.c | 18 ++++------------ arch/x86/kernel/cpu/common.c | 44 ++++++++++++++++++++++++-------------- 3 files changed, 33 insertions(+), 30 deletions(-) diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h index 4393278666d9..e880f2408e29 100644 --- a/arch/x86/include/asm/cpufeatures.h +++ b/arch/x86/include/asm/cpufeatures.h @@ -396,5 +396,6 @@ #define X86_BUG_L1TF X86_BUG(18) /* CPU is affected by L1 Terminal Fault */ #define X86_BUG_MDS X86_BUG(19) /* CPU is affected by Microarchitectural data sampling */ #define X86_BUG_MSBDS_ONLY X86_BUG(20) /* CPU is only affected by the MSDBS variant of BUG_MDS */ +#define X86_BUG_SWAPGS X86_BUG(21) /* CPU is affected by speculation through SWAPGS */ #endif /* _ASM_X86_CPUFEATURES_H */ diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 992f832c447b..6383f0db098c 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -284,18 +284,6 @@ static const char * const spectre_v1_strings[] = { [SPECTRE_V1_MITIGATION_AUTO] = "Mitigation: usercopy/swapgs barriers and __user pointer sanitization", }; -static bool is_swapgs_serializing(void) -{ - /* - * Technically, swapgs isn't serializing on AMD (despite it previously - * being documented as such in the APM). But according to AMD, %gs is - * updated non-speculatively, and the issuing of %gs-relative memory - * operands will be blocked until the %gs update completes, which is - * good enough for our purposes. - */ - return boot_cpu_data.x86_vendor == X86_VENDOR_AMD; -} - /* * Does SMAP provide full mitigation against speculative kernel access to * userspace? @@ -346,9 +334,11 @@ static void __init spectre_v1_select_mitigation(void) * PTI as the CR3 write in the Meltdown mitigation * is serializing. * - * If neither is there, mitigate with an LFENCE. + * If neither is there, mitigate with an LFENCE to + * stop speculation through swapgs. */ - if (!is_swapgs_serializing() && !boot_cpu_has(X86_FEATURE_PTI)) + if (boot_cpu_has_bug(X86_BUG_SWAPGS) && + !boot_cpu_has(X86_FEATURE_PTI)) setup_force_cpu_cap(X86_FEATURE_FENCE_SWAPGS_USER); /* diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 309b6b9b49d4..300dcf00d287 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -970,6 +970,7 @@ static void identify_cpu_without_cpuid(struct cpuinfo_x86 *c) #define NO_L1TF BIT(3) #define NO_MDS BIT(4) #define MSBDS_ONLY BIT(5) +#define NO_SWAPGS BIT(6) #define VULNWL(_vendor, _family, _model, _whitelist) \ { X86_VENDOR_##_vendor, _family, _model, X86_FEATURE_ANY, _whitelist } @@ -996,30 +997,38 @@ static const __initconst struct x86_cpu_id cpu_vuln_whitelist[] = { VULNWL_INTEL(ATOM_BONNELL, NO_SPECULATION), VULNWL_INTEL(ATOM_BONNELL_MID, NO_SPECULATION), - VULNWL_INTEL(ATOM_SILVERMONT, NO_SSB | NO_L1TF | MSBDS_ONLY), - VULNWL_INTEL(ATOM_SILVERMONT_X, NO_SSB | NO_L1TF | MSBDS_ONLY), - VULNWL_INTEL(ATOM_SILVERMONT_MID, NO_SSB | NO_L1TF | MSBDS_ONLY), - VULNWL_INTEL(ATOM_AIRMONT, NO_SSB | NO_L1TF | MSBDS_ONLY), - VULNWL_INTEL(XEON_PHI_KNL, NO_SSB | NO_L1TF | MSBDS_ONLY), - VULNWL_INTEL(XEON_PHI_KNM, NO_SSB | NO_L1TF | MSBDS_ONLY), + VULNWL_INTEL(ATOM_SILVERMONT, NO_SSB | NO_L1TF | MSBDS_ONLY | NO_SWAPGS), + VULNWL_INTEL(ATOM_SILVERMONT_X, NO_SSB | NO_L1TF | MSBDS_ONLY | NO_SWAPGS), + VULNWL_INTEL(ATOM_SILVERMONT_MID, NO_SSB | NO_L1TF | MSBDS_ONLY | NO_SWAPGS), + VULNWL_INTEL(ATOM_AIRMONT, NO_SSB | NO_L1TF | MSBDS_ONLY | NO_SWAPGS), + VULNWL_INTEL(XEON_PHI_KNL, NO_SSB | NO_L1TF | MSBDS_ONLY | NO_SWAPGS), + VULNWL_INTEL(XEON_PHI_KNM, NO_SSB | NO_L1TF | MSBDS_ONLY | NO_SWAPGS), VULNWL_INTEL(CORE_YONAH, NO_SSB), - VULNWL_INTEL(ATOM_AIRMONT_MID, NO_L1TF | MSBDS_ONLY), + VULNWL_INTEL(ATOM_AIRMONT_MID, NO_L1TF | MSBDS_ONLY | NO_SWAPGS), - VULNWL_INTEL(ATOM_GOLDMONT, NO_MDS | NO_L1TF), - VULNWL_INTEL(ATOM_GOLDMONT_X, NO_MDS | NO_L1TF), - VULNWL_INTEL(ATOM_GOLDMONT_PLUS, NO_MDS | NO_L1TF), + VULNWL_INTEL(ATOM_GOLDMONT, NO_MDS | NO_L1TF | NO_SWAPGS), + VULNWL_INTEL(ATOM_GOLDMONT_X, NO_MDS | NO_L1TF | NO_SWAPGS), + VULNWL_INTEL(ATOM_GOLDMONT_PLUS, NO_MDS | NO_L1TF | NO_SWAPGS), + + /* + * Technically, swapgs isn't serializing on AMD (despite it previously + * being documented as such in the APM). But according to AMD, %gs is + * updated non-speculatively, and the issuing of %gs-relative memory + * operands will be blocked until the %gs update completes, which is + * good enough for our purposes. + */ /* AMD Family 0xf - 0x12 */ - VULNWL_AMD(0x0f, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS), - VULNWL_AMD(0x10, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS), - VULNWL_AMD(0x11, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS), - VULNWL_AMD(0x12, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS), + VULNWL_AMD(0x0f, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS | NO_SWAPGS), + VULNWL_AMD(0x10, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS | NO_SWAPGS), + VULNWL_AMD(0x11, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS | NO_SWAPGS), + VULNWL_AMD(0x12, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS | NO_SWAPGS), /* FAMILY_ANY must be last, otherwise 0x0f - 0x12 matches won't work */ - VULNWL_AMD(X86_FAMILY_ANY, NO_MELTDOWN | NO_L1TF | NO_MDS), - VULNWL_HYGON(X86_FAMILY_ANY, NO_MELTDOWN | NO_L1TF | NO_MDS), + VULNWL_AMD(X86_FAMILY_ANY, NO_MELTDOWN | NO_L1TF | NO_MDS | NO_SWAPGS), + VULNWL_HYGON(X86_FAMILY_ANY, NO_MELTDOWN | NO_L1TF | NO_MDS | NO_SWAPGS), {} }; @@ -1056,6 +1065,9 @@ static void __init cpu_set_bug_bits(struct cpuinfo_x86 *c) setup_force_cpu_bug(X86_BUG_MSBDS_ONLY); } + if (!cpu_matches(NO_SWAPGS)) + setup_force_cpu_bug(X86_BUG_SWAPGS); + if (cpu_matches(NO_MELTDOWN)) return; -- cgit From 674fa8daa8c922c42a84b6aa85bf5ddc616accf5 Mon Sep 17 00:00:00 2001 From: Andrew Jeffery Date: Wed, 24 Jul 2019 17:31:55 +0930 Subject: pinctrl: aspeed-g5: Delay acquisition of regmaps While sorting out some devicetree issues I found that the pinctrl driver was failing to acquire its GFX regmap even though the phandle was present in the devicetree: [ 0.124190] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: No GFX phandle found, some mux configurations may fail Without access to the GFX regmap we fail to configure the mux for the VPO function: [ 1.548866] pinctrl core: add 1 pinctrl maps [ 1.549826] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: found group selector 164 for VPO [ 1.550638] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 144 (V20) for 1e6e6000.display [ 1.551346] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 145 (U19) for 1e6e6000.display ... [ 1.562057] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 218 (T22) for 1e6e6000.display [ 1.562541] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 219 (R20) for 1e6e6000.display [ 1.563113] Muxing pin 144 for VPO [ 1.563456] Want SCU8C[0x00000001]=0x1, got 0x0 from 0x00000000 [ 1.564624] aspeed_gfx 1e6e6000.display: Error applying setting, reverse things back This turned out to be a simple problem of timing: The ASPEED pinctrl driver is probed during arch_initcall(), while GFX is processed much later. As such the GFX syscon is not yet registered during the pinctrl probe() and we get an -EPROBE_DEFER when we try to look it up, however we must not defer probing the pinctrl driver for the inability to mux some GFX-related functions. Switch to lazily grabbing the regmaps when they're first required by the mux configuration. This generates a bit of noise in the patch as we have to drop the `const` qualifier on arguments for several function prototypes, but has the benefit of working. I've smoke tested this for the ast2500-evb under qemu with a dummy graphics device. We now succeed in our attempts to configure the SoC's VPO pinmux function. Fixes: 7d29ed88acbb ("pinctrl: aspeed: Read and write bits in LPC and GFX controllers") Signed-off-by: Andrew Jeffery Link: https://lore.kernel.org/r/20190724080155.12209-1-andrew@aj.id.au Signed-off-by: Linus Walleij --- drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 2 +- drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 92 +++++++++++++++++++++--------- drivers/pinctrl/aspeed/pinctrl-aspeed.c | 12 ++-- drivers/pinctrl/aspeed/pinmux-aspeed.h | 5 +- 4 files changed, 74 insertions(+), 37 deletions(-) diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c index 384396cbb22d..22256576b69a 100644 --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c @@ -2412,7 +2412,7 @@ static const struct aspeed_pin_config aspeed_g4_configs[] = { { PIN_CONFIG_INPUT_DEBOUNCE, { C14, B14 }, SCUA8, 27 }, }; -static int aspeed_g4_sig_expr_set(const struct aspeed_pinmux_data *ctx, +static int aspeed_g4_sig_expr_set(struct aspeed_pinmux_data *ctx, const struct aspeed_sig_expr *expr, bool enable) { diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c index 053101f795a2..ba6438ac4d72 100644 --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c @@ -2507,6 +2507,61 @@ static struct aspeed_pin_config aspeed_g5_configs[] = { { PIN_CONFIG_INPUT_DEBOUNCE, { A20, B19 }, SCUA8, 27 }, }; +static struct regmap *aspeed_g5_acquire_regmap(struct aspeed_pinmux_data *ctx, + int ip) +{ + if (ip == ASPEED_IP_SCU) { + WARN(!ctx->maps[ip], "Missing SCU syscon!"); + return ctx->maps[ip]; + } + + if (ip >= ASPEED_NR_PINMUX_IPS) + return ERR_PTR(-EINVAL); + + if (likely(ctx->maps[ip])) + return ctx->maps[ip]; + + if (ip == ASPEED_IP_GFX) { + struct device_node *node; + struct regmap *map; + + node = of_parse_phandle(ctx->dev->of_node, + "aspeed,external-nodes", 0); + if (node) { + map = syscon_node_to_regmap(node); + of_node_put(node); + if (IS_ERR(map)) + return map; + } else + return ERR_PTR(-ENODEV); + + ctx->maps[ASPEED_IP_GFX] = map; + dev_dbg(ctx->dev, "Acquired GFX regmap"); + return map; + } + + if (ip == ASPEED_IP_LPC) { + struct device_node *node; + struct regmap *map; + + node = of_parse_phandle(ctx->dev->of_node, + "aspeed,external-nodes", 1); + if (node) { + map = syscon_node_to_regmap(node->parent); + of_node_put(node); + if (IS_ERR(map)) + return map; + } else + map = ERR_PTR(-ENODEV); + + ctx->maps[ASPEED_IP_LPC] = map; + dev_dbg(ctx->dev, "Acquired LPC regmap"); + return map; + } + + return ERR_PTR(-EINVAL); +} + /** * Configure a pin's signal by applying an expression's descriptor state for * all descriptors in the expression. @@ -2520,7 +2575,7 @@ static struct aspeed_pin_config aspeed_g5_configs[] = { * Return: 0 if the expression is configured as requested and a negative error * code otherwise */ -static int aspeed_g5_sig_expr_set(const struct aspeed_pinmux_data *ctx, +static int aspeed_g5_sig_expr_set(struct aspeed_pinmux_data *ctx, const struct aspeed_sig_expr *expr, bool enable) { @@ -2531,9 +2586,15 @@ static int aspeed_g5_sig_expr_set(const struct aspeed_pinmux_data *ctx, const struct aspeed_sig_desc *desc = &expr->descs[i]; u32 pattern = enable ? desc->enable : desc->disable; u32 val = (pattern << __ffs(desc->mask)); + struct regmap *map; - if (!ctx->maps[desc->ip]) - return -ENODEV; + map = aspeed_g5_acquire_regmap(ctx, desc->ip); + if (IS_ERR(map)) { + dev_err(ctx->dev, + "Failed to acquire regmap for IP block %d\n", + desc->ip); + return PTR_ERR(map); + } /* * Strap registers are configured in hardware or by early-boot @@ -2641,34 +2702,11 @@ static struct pinctrl_desc aspeed_g5_pinctrl_desc = { static int aspeed_g5_pinctrl_probe(struct platform_device *pdev) { int i; - struct regmap *map; - struct device_node *node; for (i = 0; i < ARRAY_SIZE(aspeed_g5_pins); i++) aspeed_g5_pins[i].number = i; - node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 0); - map = syscon_node_to_regmap(node); - of_node_put(node); - if (IS_ERR(map)) { - dev_warn(&pdev->dev, "No GFX phandle found, some mux configurations may fail\n"); - map = NULL; - } - aspeed_g5_pinctrl_data.pinmux.maps[ASPEED_IP_GFX] = map; - - node = of_parse_phandle(pdev->dev.of_node, "aspeed,external-nodes", 1); - if (node) { - map = syscon_node_to_regmap(node->parent); - if (IS_ERR(map)) { - dev_warn(&pdev->dev, "LHC parent is not a syscon, some mux configurations may fail\n"); - map = NULL; - } - } else { - dev_warn(&pdev->dev, "No LHC phandle found, some mux configurations may fail\n"); - map = NULL; - } - of_node_put(node); - aspeed_g5_pinctrl_data.pinmux.maps[ASPEED_IP_LPC] = map; + aspeed_g5_pinctrl_data.pinmux.dev = &pdev->dev; return aspeed_pinctrl_probe(pdev, &aspeed_g5_pinctrl_desc, &aspeed_g5_pinctrl_data); diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c index 535db3de490b..54933665b5f8 100644 --- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c @@ -71,7 +71,7 @@ int aspeed_pinmux_get_fn_groups(struct pinctrl_dev *pctldev, return 0; } -static int aspeed_sig_expr_enable(const struct aspeed_pinmux_data *ctx, +static int aspeed_sig_expr_enable(struct aspeed_pinmux_data *ctx, const struct aspeed_sig_expr *expr) { int ret; @@ -86,7 +86,7 @@ static int aspeed_sig_expr_enable(const struct aspeed_pinmux_data *ctx, return 0; } -static int aspeed_sig_expr_disable(const struct aspeed_pinmux_data *ctx, +static int aspeed_sig_expr_disable(struct aspeed_pinmux_data *ctx, const struct aspeed_sig_expr *expr) { int ret; @@ -109,7 +109,7 @@ static int aspeed_sig_expr_disable(const struct aspeed_pinmux_data *ctx, * * Return: 0 if all expressions are disabled, otherwise a negative error code */ -static int aspeed_disable_sig(const struct aspeed_pinmux_data *ctx, +static int aspeed_disable_sig(struct aspeed_pinmux_data *ctx, const struct aspeed_sig_expr **exprs) { int ret = 0; @@ -217,8 +217,7 @@ int aspeed_pinmux_set_mux(struct pinctrl_dev *pctldev, unsigned int function, { int i; int ret; - const struct aspeed_pinctrl_data *pdata = - pinctrl_dev_get_drvdata(pctldev); + struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); const struct aspeed_pin_group *pgroup = &pdata->pinmux.groups[group]; const struct aspeed_pin_function *pfunc = &pdata->pinmux.functions[function]; @@ -306,8 +305,7 @@ int aspeed_gpio_request_enable(struct pinctrl_dev *pctldev, unsigned int offset) { int ret; - const struct aspeed_pinctrl_data *pdata = - pinctrl_dev_get_drvdata(pctldev); + struct aspeed_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev); const struct aspeed_pin_desc *pdesc = pdata->pins[offset].drv_data; const struct aspeed_sig_expr ***prios, **funcs, *expr; diff --git a/drivers/pinctrl/aspeed/pinmux-aspeed.h b/drivers/pinctrl/aspeed/pinmux-aspeed.h index 329d54d48667..52d299b59ce2 100644 --- a/drivers/pinctrl/aspeed/pinmux-aspeed.h +++ b/drivers/pinctrl/aspeed/pinmux-aspeed.h @@ -702,11 +702,12 @@ struct aspeed_pin_function { struct aspeed_pinmux_data; struct aspeed_pinmux_ops { - int (*set)(const struct aspeed_pinmux_data *ctx, + int (*set)(struct aspeed_pinmux_data *ctx, const struct aspeed_sig_expr *expr, bool enabled); }; struct aspeed_pinmux_data { + struct device *dev; struct regmap *maps[ASPEED_NR_PINMUX_IPS]; const struct aspeed_pinmux_ops *ops; @@ -725,7 +726,7 @@ int aspeed_sig_expr_eval(const struct aspeed_pinmux_data *ctx, const struct aspeed_sig_expr *expr, bool enabled); -static inline int aspeed_sig_expr_set(const struct aspeed_pinmux_data *ctx, +static inline int aspeed_sig_expr_set(struct aspeed_pinmux_data *ctx, const struct aspeed_sig_expr *expr, bool enabled) { -- cgit From d95da993383c78f7efd25957ba3af23af4b1c613 Mon Sep 17 00:00:00 2001 From: Chris Packham Date: Mon, 8 Jul 2019 08:35:58 +1200 Subject: gpiolib: Preserve desc->flags when setting state desc->flags may already have values set by of_gpiochip_add() so make sure that this isn't undone when setting the initial direction. Cc: stable@vger.kernel.org Fixes: 3edfb7bd76bd1cba ("gpiolib: Show correct direction from the beginning") Signed-off-by: Chris Packham Link: https://lore.kernel.org/r/20190707203558.10993-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index bf05c29b53be..f497003f119c 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1394,12 +1394,17 @@ int gpiochip_add_data_with_key(struct gpio_chip *chip, void *data, for (i = 0; i < chip->ngpio; i++) { struct gpio_desc *desc = &gdev->descs[i]; - if (chip->get_direction && gpiochip_line_is_valid(chip, i)) - desc->flags = !chip->get_direction(chip, i) ? - (1 << FLAG_IS_OUT) : 0; - else - desc->flags = !chip->direction_input ? - (1 << FLAG_IS_OUT) : 0; + if (chip->get_direction && gpiochip_line_is_valid(chip, i)) { + if (!chip->get_direction(chip, i)) + set_bit(FLAG_IS_OUT, &desc->flags); + else + clear_bit(FLAG_IS_OUT, &desc->flags); + } else { + if (!chip->direction_input) + set_bit(FLAG_IS_OUT, &desc->flags); + else + clear_bit(FLAG_IS_OUT, &desc->flags); + } } acpi_gpiochip_add(chip); -- cgit From cee3536d24a1d5db66b9f68c3ece0af128187ab4 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 22 Jul 2019 22:26:56 +1000 Subject: powerpc: Wire up clone3 syscall Wire up the new clone3 syscall added in commit 7f192e3cd316 ("fork: add clone3"). This requires a ppc_clone3 wrapper, in order to save the non-volatile GPRs before calling into the generic syscall code. Otherwise we hit the BUG_ON in CHECK_FULL_REGS in copy_thread(). Lightly tested using Christian's test code on a Power8 LE VM. Signed-off-by: Michael Ellerman Acked-by: Christian Brauner Link: https://lore.kernel.org/r/20190724140259.23554-1-mpe@ellerman.id.au --- arch/powerpc/include/asm/unistd.h | 1 + arch/powerpc/kernel/entry_32.S | 8 ++++++++ arch/powerpc/kernel/entry_64.S | 5 +++++ arch/powerpc/kernel/syscalls/syscall.tbl | 2 +- 4 files changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index 68473c3c471c..b0720c7c3fcf 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -49,6 +49,7 @@ #define __ARCH_WANT_SYS_FORK #define __ARCH_WANT_SYS_VFORK #define __ARCH_WANT_SYS_CLONE +#define __ARCH_WANT_SYS_CLONE3 #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_UNISTD_H_ */ diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 85fdb6d879f1..54fab22c9a43 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -597,6 +597,14 @@ ppc_clone: stw r0,_TRAP(r1) /* register set saved */ b sys_clone + .globl ppc_clone3 +ppc_clone3: + SAVE_NVGPRS(r1) + lwz r0,_TRAP(r1) + rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */ + stw r0,_TRAP(r1) /* register set saved */ + b sys_clone3 + .globl ppc_swapcontext ppc_swapcontext: SAVE_NVGPRS(r1) diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index d9105fcf4021..0a0b5310f54a 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -487,6 +487,11 @@ _GLOBAL(ppc_clone) bl sys_clone b .Lsyscall_exit +_GLOBAL(ppc_clone3) + bl save_nvgprs + bl sys_clone3 + b .Lsyscall_exit + _GLOBAL(ppc32_swapcontext) bl save_nvgprs bl compat_sys_swapcontext diff --git a/arch/powerpc/kernel/syscalls/syscall.tbl b/arch/powerpc/kernel/syscalls/syscall.tbl index 3331749aab20..43f736ed47f2 100644 --- a/arch/powerpc/kernel/syscalls/syscall.tbl +++ b/arch/powerpc/kernel/syscalls/syscall.tbl @@ -516,4 +516,4 @@ 432 common fsmount sys_fsmount 433 common fspick sys_fspick 434 common pidfd_open sys_pidfd_open -# 435 reserved for clone3 +435 nospu clone3 ppc_clone3 -- cgit From 622445541b751ce70a952b8486ce4512a792c0a2 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 25 Jul 2019 17:05:13 +0900 Subject: kbuild: detect missing "WITH Linux-syscall-note" for uapi headers UAPI headers licensed under GPL are supposed to have exception "WITH Linux-syscall-note" so that they can be included into non-GPL user space application code. Unfortunately, people often miss to add it. Break 'make headers' when any of exported headers lacks the exception note so that the 0-day bot can easily catch it. Signed-off-by: Masahiro Yamada --- scripts/headers_install.sh | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/scripts/headers_install.sh b/scripts/headers_install.sh index 47f6f3ea0771..bbaf29386995 100755 --- a/scripts/headers_install.sh +++ b/scripts/headers_install.sh @@ -23,6 +23,12 @@ TMPFILE=$OUTFILE.tmp trap 'rm -f $OUTFILE $TMPFILE' EXIT +# SPDX-License-Identifier with GPL variants must have "WITH Linux-syscall-note" +if [ -n "$(sed -n -e "/SPDX-License-Identifier:.*GPL-/{/WITH Linux-syscall-note/!p}" $INFILE)" ]; then + echo "error: $INFILE: missing \"WITH Linux-syscall-note\" for SPDX-License-Identifier" >&2 + exit 1 +fi + sed -E -e ' s/([[:space:](])(__user|__force|__iomem)[[:space:]]/\1/g s/__attribute_const__([[:space:]]|$)/\1/g -- cgit From 2e616d9f9ce8d469db4cd0a019cdc2ff3feab577 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Sun, 28 Jul 2019 21:12:32 -0700 Subject: xfs: fix stack contents leakage in the v1 inumber ioctls Explicitly initialize the onstack structures to zero so we don't leak kernel memory into userspace when converting the in-core inumbers structure to the v1 inogrp ioctl structure. Add a comment about why we have to use memset to ensure that the padding holes in the structures are set to zero. Fixes: 5f19c7fc6873351 ("xfs: introduce v5 inode group structure") Reported-by: Dan Carpenter Signed-off-by: Darrick J. Wong Reviewed-by: Eric Sandeen --- fs/xfs/xfs_itable.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c index a8a06bb78ea8..f5c955d35be4 100644 --- a/fs/xfs/xfs_itable.c +++ b/fs/xfs/xfs_itable.c @@ -272,6 +272,7 @@ xfs_bulkstat_to_bstat( struct xfs_bstat *bs1, const struct xfs_bulkstat *bstat) { + /* memset is needed here because of padding holes in the structure. */ memset(bs1, 0, sizeof(struct xfs_bstat)); bs1->bs_ino = bstat->bs_ino; bs1->bs_mode = bstat->bs_mode; @@ -388,6 +389,8 @@ xfs_inumbers_to_inogrp( struct xfs_inogrp *ig1, const struct xfs_inumbers *ig) { + /* memset is needed here because of padding holes in the structure. */ + memset(ig1, 0, sizeof(struct xfs_inogrp)); ig1->xi_startino = ig->xi_startino; ig1->xi_alloccount = ig->xi_alloccount; ig1->xi_allocmask = ig->xi_allocmask; -- cgit From 38fb6d0ea34299d97b031ed64fe994158b6f8eb3 Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Thu, 25 Jul 2019 11:08:52 +0800 Subject: f2fs: use EINVAL for superblock with invalid magic The kernel mount_block_root() function expects -EACESS or -EINVAL for a unmountable filesystem when trying to mount the root with different filesystem types. However, in 5.3-rc1 the behavior when F2FS code cannot find valid block changed to return -EFSCORRUPTED(-EUCLEAN), and this error code makes mount_block_root() fail when trying to probe F2FS. When the magic number of the superblock mismatches, it has a high probability that it's just not a F2FS. In this case return -EINVAL seems to be a better result, and this return value can make mount_block_root() probing work again. Return -EINVAL when the superblock has magic mismatch, -EFSCORRUPTED in other cases (the magic matches but the superblock cannot be recognized). Fixes: 10f966bbf521 ("f2fs: use generic EFSBADCRC/EFSCORRUPTED") Signed-off-by: Icenowy Zheng Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim --- fs/f2fs/super.c | 48 ++++++++++++++++++++++++------------------------ 1 file changed, 24 insertions(+), 24 deletions(-) diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c index d95a681ef7c9..1838dd852a50 100644 --- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -2422,6 +2422,12 @@ static int sanity_check_raw_super(struct f2fs_sb_info *sbi, size_t crc_offset = 0; __u32 crc = 0; + if (le32_to_cpu(raw_super->magic) != F2FS_SUPER_MAGIC) { + f2fs_info(sbi, "Magic Mismatch, valid(0x%x) - read(0x%x)", + F2FS_SUPER_MAGIC, le32_to_cpu(raw_super->magic)); + return -EINVAL; + } + /* Check checksum_offset and crc in superblock */ if (__F2FS_HAS_FEATURE(raw_super, F2FS_FEATURE_SB_CHKSUM)) { crc_offset = le32_to_cpu(raw_super->checksum_offset); @@ -2429,26 +2435,20 @@ static int sanity_check_raw_super(struct f2fs_sb_info *sbi, offsetof(struct f2fs_super_block, crc)) { f2fs_info(sbi, "Invalid SB checksum offset: %zu", crc_offset); - return 1; + return -EFSCORRUPTED; } crc = le32_to_cpu(raw_super->crc); if (!f2fs_crc_valid(sbi, crc, raw_super, crc_offset)) { f2fs_info(sbi, "Invalid SB checksum value: %u", crc); - return 1; + return -EFSCORRUPTED; } } - if (F2FS_SUPER_MAGIC != le32_to_cpu(raw_super->magic)) { - f2fs_info(sbi, "Magic Mismatch, valid(0x%x) - read(0x%x)", - F2FS_SUPER_MAGIC, le32_to_cpu(raw_super->magic)); - return 1; - } - /* Currently, support only 4KB page cache size */ if (F2FS_BLKSIZE != PAGE_SIZE) { f2fs_info(sbi, "Invalid page_cache_size (%lu), supports only 4KB", PAGE_SIZE); - return 1; + return -EFSCORRUPTED; } /* Currently, support only 4KB block size */ @@ -2456,14 +2456,14 @@ static int sanity_check_raw_super(struct f2fs_sb_info *sbi, if (blocksize != F2FS_BLKSIZE) { f2fs_info(sbi, "Invalid blocksize (%u), supports only 4KB", blocksize); - return 1; + return -EFSCORRUPTED; } /* check log blocks per segment */ if (le32_to_cpu(raw_super->log_blocks_per_seg) != 9) { f2fs_info(sbi, "Invalid log blocks per segment (%u)", le32_to_cpu(raw_super->log_blocks_per_seg)); - return 1; + return -EFSCORRUPTED; } /* Currently, support 512/1024/2048/4096 bytes sector size */ @@ -2473,7 +2473,7 @@ static int sanity_check_raw_super(struct f2fs_sb_info *sbi, F2FS_MIN_LOG_SECTOR_SIZE) { f2fs_info(sbi, "Invalid log sectorsize (%u)", le32_to_cpu(raw_super->log_sectorsize)); - return 1; + return -EFSCORRUPTED; } if (le32_to_cpu(raw_super->log_sectors_per_block) + le32_to_cpu(raw_super->log_sectorsize) != @@ -2481,7 +2481,7 @@ static int sanity_check_raw_super(struct f2fs_sb_info *sbi, f2fs_info(sbi, "Invalid log sectors per block(%u) log sectorsize(%u)", le32_to_cpu(raw_super->log_sectors_per_block), le32_to_cpu(raw_super->log_sectorsize)); - return 1; + return -EFSCORRUPTED; } segment_count = le32_to_cpu(raw_super->segment_count); @@ -2495,7 +2495,7 @@ static int sanity_check_raw_super(struct f2fs_sb_info *sbi, if (segment_count > F2FS_MAX_SEGMENT || segment_count < F2FS_MIN_SEGMENTS) { f2fs_info(sbi, "Invalid segment count (%u)", segment_count); - return 1; + return -EFSCORRUPTED; } if (total_sections > segment_count || @@ -2503,25 +2503,25 @@ static int sanity_check_raw_super(struct f2fs_sb_info *sbi, segs_per_sec > segment_count || !segs_per_sec) { f2fs_info(sbi, "Invalid segment/section count (%u, %u x %u)", segment_count, total_sections, segs_per_sec); - return 1; + return -EFSCORRUPTED; } if ((segment_count / segs_per_sec) < total_sections) { f2fs_info(sbi, "Small segment_count (%u < %u * %u)", segment_count, segs_per_sec, total_sections); - return 1; + return -EFSCORRUPTED; } if (segment_count > (le64_to_cpu(raw_super->block_count) >> 9)) { f2fs_info(sbi, "Wrong segment_count / block_count (%u > %llu)", segment_count, le64_to_cpu(raw_super->block_count)); - return 1; + return -EFSCORRUPTED; } if (secs_per_zone > total_sections || !secs_per_zone) { f2fs_info(sbi, "Wrong secs_per_zone / total_sections (%u, %u)", secs_per_zone, total_sections); - return 1; + return -EFSCORRUPTED; } if (le32_to_cpu(raw_super->extension_count) > F2FS_MAX_EXTENSION || raw_super->hot_ext_count > F2FS_MAX_EXTENSION || @@ -2531,7 +2531,7 @@ static int sanity_check_raw_super(struct f2fs_sb_info *sbi, le32_to_cpu(raw_super->extension_count), raw_super->hot_ext_count, F2FS_MAX_EXTENSION); - return 1; + return -EFSCORRUPTED; } if (le32_to_cpu(raw_super->cp_payload) > @@ -2539,7 +2539,7 @@ static int sanity_check_raw_super(struct f2fs_sb_info *sbi, f2fs_info(sbi, "Insane cp_payload (%u > %u)", le32_to_cpu(raw_super->cp_payload), blocks_per_seg - F2FS_CP_PACKS); - return 1; + return -EFSCORRUPTED; } /* check reserved ino info */ @@ -2550,12 +2550,12 @@ static int sanity_check_raw_super(struct f2fs_sb_info *sbi, le32_to_cpu(raw_super->node_ino), le32_to_cpu(raw_super->meta_ino), le32_to_cpu(raw_super->root_ino)); - return 1; + return -EFSCORRUPTED; } /* check CP/SIT/NAT/SSA/MAIN_AREA area boundary */ if (sanity_check_area_boundary(sbi, bh)) - return 1; + return -EFSCORRUPTED; return 0; } @@ -2872,10 +2872,10 @@ static int read_raw_super_block(struct f2fs_sb_info *sbi, } /* sanity checking of raw super */ - if (sanity_check_raw_super(sbi, bh)) { + err = sanity_check_raw_super(sbi, bh); + if (err) { f2fs_err(sbi, "Can't find valid F2FS filesystem in %dth superblock", block + 1); - err = -EFSCORRUPTED; brelse(bh); continue; } -- cgit From c6622a425acd1d2f3a443cd39b490a8777b622d7 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Fri, 26 Jul 2019 12:34:32 -0700 Subject: dma-contiguous: do not overwrite align in dma_alloc_contiguous() The dma_alloc_contiguous() limits align at CONFIG_CMA_ALIGNMENT for cma_alloc() however it does not restore it for the fallback routine. This will result in a size mismatch between the allocation and free when running into the fallback routines after cma_alloc() fails, if the align is larger than CONFIG_CMA_ALIGNMENT. This patch adds a cma_align to take care of cma_alloc() and prevent the align from being overwritten. Fixes: fdaeec198ada ("dma-contiguous: add dma_{alloc,free}_contiguous() helpers") Reported-by: Dafna Hirschfeld Signed-off-by: Nicolin Chen Signed-off-by: Christoph Hellwig --- kernel/dma/contiguous.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/dma/contiguous.c b/kernel/dma/contiguous.c index bfc0c17f2a3d..ea8259f53eda 100644 --- a/kernel/dma/contiguous.c +++ b/kernel/dma/contiguous.c @@ -243,8 +243,9 @@ struct page *dma_alloc_contiguous(struct device *dev, size_t size, gfp_t gfp) /* CMA can be used only in the context which permits sleeping */ if (cma && gfpflags_allow_blocking(gfp)) { - align = min_t(size_t, align, CONFIG_CMA_ALIGNMENT); - page = cma_alloc(cma, count, align, gfp & __GFP_NOWARN); + size_t cma_align = min_t(size_t, align, CONFIG_CMA_ALIGNMENT); + + page = cma_alloc(cma, count, cma_align, gfp & __GFP_NOWARN); } /* Fallback allocation of normal pages */ -- cgit From f46cc0152501e46d1b3aa5e7eade61145070eab0 Mon Sep 17 00:00:00 2001 From: Nicolin Chen Date: Fri, 26 Jul 2019 12:34:33 -0700 Subject: dma-contiguous: page-align the size in dma_free_contiguous() According to the original dma_direct_alloc_pages() code: { unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT; if (!dma_release_from_contiguous(dev, page, count)) __free_pages(page, get_order(size)); } The count parameter for dma_release_from_contiguous() was page aligned before the right-shifting operation, while the new API dma_free_contiguous() forgets to have PAGE_ALIGN() at the size. So this patch simply adds it to prevent any corner case. Fixes: fdaeec198ada ("dma-contiguous: add dma_{alloc,free}_contiguous() helpers") Signed-off-by: Nicolin Chen Reviewed-by: Christoph Hellwig Signed-off-by: Christoph Hellwig --- kernel/dma/contiguous.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/dma/contiguous.c b/kernel/dma/contiguous.c index ea8259f53eda..2bd410f934b3 100644 --- a/kernel/dma/contiguous.c +++ b/kernel/dma/contiguous.c @@ -267,7 +267,8 @@ struct page *dma_alloc_contiguous(struct device *dev, size_t size, gfp_t gfp) */ void dma_free_contiguous(struct device *dev, struct page *page, size_t size) { - if (!cma_release(dev_get_cma_area(dev), page, size >> PAGE_SHIFT)) + if (!cma_release(dev_get_cma_area(dev), page, + PAGE_ALIGN(size) >> PAGE_SHIFT)) __free_pages(page, get_order(size)); } -- cgit From 75035fe22b808a520e1d712ebe913684ba406e01 Mon Sep 17 00:00:00 2001 From: Ben Segal Date: Tue, 23 Jul 2019 11:22:42 +0300 Subject: habanalabs: fix F/W download in BE architecture writeX macros might perform byte-swapping in BE architectures. As our F/W is in LE format, we need to make sure no byte-swapping will occur. There is a standard kernel function (called memcpy_toio) for copying data to I/O area which is used in a lot of drivers to download F/W to PCIe adapters. That function also makes sure the data is copied "as-is", without byte-swapping. This patch use that function to copy the F/W to the GOYA ASIC instead of writeX macros. Signed-off-by: Ben Segal Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/firmware_if.c | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-) diff --git a/drivers/misc/habanalabs/firmware_if.c b/drivers/misc/habanalabs/firmware_if.c index cc8168bacb24..61112eda4dd2 100644 --- a/drivers/misc/habanalabs/firmware_if.c +++ b/drivers/misc/habanalabs/firmware_if.c @@ -24,7 +24,7 @@ int hl_fw_push_fw_to_device(struct hl_device *hdev, const char *fw_name, { const struct firmware *fw; const u64 *fw_data; - size_t fw_size, i; + size_t fw_size; int rc; rc = request_firmware(&fw, fw_name, hdev->dev); @@ -45,22 +45,7 @@ int hl_fw_push_fw_to_device(struct hl_device *hdev, const char *fw_name, fw_data = (const u64 *) fw->data; - if ((fw->size % 8) != 0) - fw_size -= 8; - - for (i = 0 ; i < fw_size ; i += 8, fw_data++, dst += 8) { - if (!(i & (0x80000 - 1))) { - dev_dbg(hdev->dev, - "copied so far %zu out of %zu for %s firmware", - i, fw_size, fw_name); - usleep_range(20, 100); - } - - writeq(*fw_data, dst); - } - - if ((fw->size % 8) != 0) - writel(*(const u32 *) fw_data, dst); + memcpy_toio(dst, fw_data, fw_size); out: release_firmware(fw); -- cgit From 2aa4e410795cb94b6577fe0e251b5f5226499310 Mon Sep 17 00:00:00 2001 From: Ben Segal Date: Thu, 18 Jul 2019 12:27:00 +0000 Subject: habanalabs: fix host memory polling in BE architecture This patch fix a bug in the host memory polling macro. The bug is that the memory being polled can be written by the device, which always writes it in LE. However, if the host is running Linux in BE mode, we need to convert the value that was written by the device before matching it to the required value that the caller has given to the macro. Signed-off-by: Ben Segal Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay --- drivers/misc/habanalabs/command_submission.c | 2 +- drivers/misc/habanalabs/firmware_if.c | 3 ++- drivers/misc/habanalabs/goya/goya.c | 5 +++-- drivers/misc/habanalabs/habanalabs.h | 16 ++++++++++++++-- 4 files changed, 20 insertions(+), 6 deletions(-) diff --git a/drivers/misc/habanalabs/command_submission.c b/drivers/misc/habanalabs/command_submission.c index 6ad83d5ef4b0..f00d1c32f6d6 100644 --- a/drivers/misc/habanalabs/command_submission.c +++ b/drivers/misc/habanalabs/command_submission.c @@ -683,7 +683,7 @@ int hl_cs_ioctl(struct hl_fpriv *hpriv, void *data) rc = hl_poll_timeout_memory(hdev, &ctx->thread_ctx_switch_wait_token, tmp, (tmp == 1), - 100, jiffies_to_usecs(hdev->timeout_jiffies)); + 100, jiffies_to_usecs(hdev->timeout_jiffies), false); if (rc == -ETIMEDOUT) { dev_err(hdev->dev, diff --git a/drivers/misc/habanalabs/firmware_if.c b/drivers/misc/habanalabs/firmware_if.c index 61112eda4dd2..ea2ca67fbfbf 100644 --- a/drivers/misc/habanalabs/firmware_if.c +++ b/drivers/misc/habanalabs/firmware_if.c @@ -97,7 +97,8 @@ int hl_fw_send_cpu_message(struct hl_device *hdev, u32 hw_queue_id, u32 *msg, } rc = hl_poll_timeout_memory(hdev, &pkt->fence, tmp, - (tmp == ARMCP_PACKET_FENCE_VAL), 1000, timeout); + (tmp == ARMCP_PACKET_FENCE_VAL), 1000, + timeout, true); hl_hw_queue_inc_ci_kernel(hdev, hw_queue_id); diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c index 1a2c062a57d4..a0e181714891 100644 --- a/drivers/misc/habanalabs/goya/goya.c +++ b/drivers/misc/habanalabs/goya/goya.c @@ -2864,7 +2864,8 @@ static int goya_send_job_on_qman0(struct hl_device *hdev, struct hl_cs_job *job) } rc = hl_poll_timeout_memory(hdev, fence_ptr, tmp, - (tmp == GOYA_QMAN0_FENCE_VAL), 1000, timeout); + (tmp == GOYA_QMAN0_FENCE_VAL), 1000, + timeout, true); hl_hw_queue_inc_ci_kernel(hdev, GOYA_QUEUE_ID_DMA_0); @@ -2945,7 +2946,7 @@ int goya_test_queue(struct hl_device *hdev, u32 hw_queue_id) } rc = hl_poll_timeout_memory(hdev, fence_ptr, tmp, (tmp == fence_val), - 1000, GOYA_TEST_QUEUE_WAIT_USEC); + 1000, GOYA_TEST_QUEUE_WAIT_USEC, true); hl_hw_queue_inc_ci_kernel(hdev, hw_queue_id); diff --git a/drivers/misc/habanalabs/habanalabs.h b/drivers/misc/habanalabs/habanalabs.h index 10da9940ee0d..6a4c64b97f38 100644 --- a/drivers/misc/habanalabs/habanalabs.h +++ b/drivers/misc/habanalabs/habanalabs.h @@ -1062,9 +1062,17 @@ void hl_wreg(struct hl_device *hdev, u32 reg, u32 val); /* * address in this macro points always to a memory location in the * host's (server's) memory. That location is updated asynchronously - * either by the direct access of the device or by another core + * either by the direct access of the device or by another core. + * + * To work both in LE and BE architectures, we need to distinguish between the + * two states (device or another core updates the memory location). Therefore, + * if mem_written_by_device is true, the host memory being polled will be + * updated directly by the device. If false, the host memory being polled will + * be updated by host CPU. Required so host knows whether or not the memory + * might need to be byte-swapped before returning value to caller. */ -#define hl_poll_timeout_memory(hdev, addr, val, cond, sleep_us, timeout_us) \ +#define hl_poll_timeout_memory(hdev, addr, val, cond, sleep_us, timeout_us, \ + mem_written_by_device) \ ({ \ ktime_t __timeout; \ /* timeout should be longer when working with simulator */ \ @@ -1077,10 +1085,14 @@ void hl_wreg(struct hl_device *hdev, u32 reg, u32 val); /* Verify we read updates done by other cores or by device */ \ mb(); \ (val) = *((u32 *) (uintptr_t) (addr)); \ + if (mem_written_by_device) \ + (val) = le32_to_cpu(val); \ if (cond) \ break; \ if (timeout_us && ktime_compare(ktime_get(), __timeout) > 0) { \ (val) = *((u32 *) (uintptr_t) (addr)); \ + if (mem_written_by_device) \ + (val) = le32_to_cpu(val); \ break; \ } \ if (sleep_us) \ -- cgit From cdb2d3ee0436d74fa9092f2df46aaa6f9e03c969 Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Fri, 26 Jul 2019 13:27:10 +0200 Subject: arm64: KVM: hyp: debug-sr: Mark expected switch fall-through MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When fall-through warnings was enabled by default the following warnings was starting to show up: ../arch/arm64/kvm/hyp/debug-sr.c: In function ‘__debug_save_state’: ../arch/arm64/kvm/hyp/debug-sr.c:20:19: warning: this statement may fall through [-Wimplicit-fallthrough=] case 15: ptr[15] = read_debug(reg, 15); \ ../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’ save_debug(dbg->dbg_bcr, dbgbcr, brps); ^~~~~~~~~~ ../arch/arm64/kvm/hyp/debug-sr.c:21:2: note: here case 14: ptr[14] = read_debug(reg, 14); \ ^~~~ ../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’ save_debug(dbg->dbg_bcr, dbgbcr, brps); ^~~~~~~~~~ ../arch/arm64/kvm/hyp/debug-sr.c:21:19: warning: this statement may fall through [-Wimplicit-fallthrough=] case 14: ptr[14] = read_debug(reg, 14); \ ../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’ save_debug(dbg->dbg_bcr, dbgbcr, brps); ^~~~~~~~~~ ../arch/arm64/kvm/hyp/debug-sr.c:22:2: note: here case 13: ptr[13] = read_debug(reg, 13); \ ^~~~ ../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’ save_debug(dbg->dbg_bcr, dbgbcr, brps); ^~~~~~~~~~ Rework to add a 'Fall through' comment where the compiler warned about fall-through, hence silencing the warning. Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning") Signed-off-by: Anders Roxell [maz: fixed commit message] Signed-off-by: Marc Zyngier --- arch/arm64/kvm/hyp/debug-sr.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm64/kvm/hyp/debug-sr.c b/arch/arm64/kvm/hyp/debug-sr.c index 26781da3ad3e..0fc9872a1467 100644 --- a/arch/arm64/kvm/hyp/debug-sr.c +++ b/arch/arm64/kvm/hyp/debug-sr.c @@ -18,40 +18,70 @@ #define save_debug(ptr,reg,nr) \ switch (nr) { \ case 15: ptr[15] = read_debug(reg, 15); \ + /* Fall through */ \ case 14: ptr[14] = read_debug(reg, 14); \ + /* Fall through */ \ case 13: ptr[13] = read_debug(reg, 13); \ + /* Fall through */ \ case 12: ptr[12] = read_debug(reg, 12); \ + /* Fall through */ \ case 11: ptr[11] = read_debug(reg, 11); \ + /* Fall through */ \ case 10: ptr[10] = read_debug(reg, 10); \ + /* Fall through */ \ case 9: ptr[9] = read_debug(reg, 9); \ + /* Fall through */ \ case 8: ptr[8] = read_debug(reg, 8); \ + /* Fall through */ \ case 7: ptr[7] = read_debug(reg, 7); \ + /* Fall through */ \ case 6: ptr[6] = read_debug(reg, 6); \ + /* Fall through */ \ case 5: ptr[5] = read_debug(reg, 5); \ + /* Fall through */ \ case 4: ptr[4] = read_debug(reg, 4); \ + /* Fall through */ \ case 3: ptr[3] = read_debug(reg, 3); \ + /* Fall through */ \ case 2: ptr[2] = read_debug(reg, 2); \ + /* Fall through */ \ case 1: ptr[1] = read_debug(reg, 1); \ + /* Fall through */ \ default: ptr[0] = read_debug(reg, 0); \ } #define restore_debug(ptr,reg,nr) \ switch (nr) { \ case 15: write_debug(ptr[15], reg, 15); \ + /* Fall through */ \ case 14: write_debug(ptr[14], reg, 14); \ + /* Fall through */ \ case 13: write_debug(ptr[13], reg, 13); \ + /* Fall through */ \ case 12: write_debug(ptr[12], reg, 12); \ + /* Fall through */ \ case 11: write_debug(ptr[11], reg, 11); \ + /* Fall through */ \ case 10: write_debug(ptr[10], reg, 10); \ + /* Fall through */ \ case 9: write_debug(ptr[9], reg, 9); \ + /* Fall through */ \ case 8: write_debug(ptr[8], reg, 8); \ + /* Fall through */ \ case 7: write_debug(ptr[7], reg, 7); \ + /* Fall through */ \ case 6: write_debug(ptr[6], reg, 6); \ + /* Fall through */ \ case 5: write_debug(ptr[5], reg, 5); \ + /* Fall through */ \ case 4: write_debug(ptr[4], reg, 4); \ + /* Fall through */ \ case 3: write_debug(ptr[3], reg, 3); \ + /* Fall through */ \ case 2: write_debug(ptr[2], reg, 2); \ + /* Fall through */ \ case 1: write_debug(ptr[1], reg, 1); \ + /* Fall through */ \ default: write_debug(ptr[0], reg, 0); \ } -- cgit From 849adec41203ac5837c40c2d7e08490ffdef3c2c Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 29 Jul 2019 11:06:17 +0100 Subject: arm64: compat: Allow single-byte watchpoints on all addresses Commit d968d2b801d8 ("ARM: 7497/1: hw_breakpoint: allow single-byte watchpoints on all addresses") changed the validation requirements for hardware watchpoints on arch/arm/. Update our compat layer to implement the same relaxation. Cc: Signed-off-by: Will Deacon --- arch/arm64/kernel/hw_breakpoint.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c index dceb84520948..67b3bae50b92 100644 --- a/arch/arm64/kernel/hw_breakpoint.c +++ b/arch/arm64/kernel/hw_breakpoint.c @@ -536,13 +536,14 @@ int hw_breakpoint_arch_parse(struct perf_event *bp, /* Aligned */ break; case 1: - /* Allow single byte watchpoint. */ - if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1) - break; case 2: /* Allow halfword watchpoints and breakpoints. */ if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2) break; + case 3: + /* Allow single byte watchpoint. */ + if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1) + break; default: return -EINVAL; } -- cgit From 0d7fd70f26039bd4b33444ca47f0e69ce3ae0354 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 29 Jul 2019 11:43:48 +0100 Subject: drivers/perf: arm_pmu: Fix failure path in PM notifier Handling of the CPU_PM_ENTER_FAILED transition in the Arm PMU PM notifier code incorrectly skips restoration of the counters. Fix the logic so that CPU_PM_ENTER_FAILED follows the same path as CPU_PM_EXIT. Cc: Fixes: da4e4f18afe0f372 ("drivers/perf: arm_pmu: implement CPU_PM notifier") Reported-by: Anders Roxell Acked-by: Lorenzo Pieralisi Signed-off-by: Will Deacon --- drivers/perf/arm_pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c index 2d06b8095a19..df352b334ea7 100644 --- a/drivers/perf/arm_pmu.c +++ b/drivers/perf/arm_pmu.c @@ -723,8 +723,8 @@ static int cpu_pm_pmu_notify(struct notifier_block *b, unsigned long cmd, cpu_pm_pmu_setup(armpmu, cmd); break; case CPU_PM_EXIT: - cpu_pm_pmu_setup(armpmu, cmd); case CPU_PM_ENTER_FAILED: + cpu_pm_pmu_setup(armpmu, cmd); armpmu->start(armpmu); break; default: -- cgit From 75a382f1c9e5092db10ad1e2111633d61b65e578 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 29 Jul 2019 11:39:45 +0100 Subject: arm64: hw_breakpoint: Fix warnings about implicit fallthrough Now that -Wimplicit-fallthrough is passed to GCC by default, the kernel build has suddenly got noisy. Annotate the two fall-through cases in our hw_breakpoint implementation, since they are both intentional. Reported-by: Anders Roxell Signed-off-by: Will Deacon --- arch/arm64/kernel/hw_breakpoint.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c index 67b3bae50b92..38ee1514cd9c 100644 --- a/arch/arm64/kernel/hw_breakpoint.c +++ b/arch/arm64/kernel/hw_breakpoint.c @@ -540,10 +540,14 @@ int hw_breakpoint_arch_parse(struct perf_event *bp, /* Allow halfword watchpoints and breakpoints. */ if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2) break; + + /* Fallthrough */ case 3: /* Allow single byte watchpoint. */ if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1) break; + + /* Fallthrough */ default: return -EINVAL; } -- cgit From 6655473920129eb2dd1dded147722316294a699a Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Fri, 26 Jul 2019 13:27:25 +0200 Subject: arm64: smp: Mark expected switch fall-through MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When fall-through warnings was enabled by default the following warning was starting to show up: In file included from ../include/linux/kernel.h:15, from ../include/linux/list.h:9, from ../include/linux/kobject.h:19, from ../include/linux/of.h:17, from ../include/linux/irqdomain.h:35, from ../include/linux/acpi.h:13, from ../arch/arm64/kernel/smp.c:9: ../arch/arm64/kernel/smp.c: In function ‘__cpu_up’: ../include/linux/printk.h:302:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../arch/arm64/kernel/smp.c:156:4: note: in expansion of macro ‘pr_crit’ pr_crit("CPU%u: may not have shut down cleanly\n", cpu); ^~~~~~~ ../arch/arm64/kernel/smp.c:157:3: note: here case CPU_STUCK_IN_KERNEL: ^~~~ Rework so that the compiler doesn't warn about fall-through. Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning") Signed-off-by: Anders Roxell Signed-off-by: Will Deacon --- arch/arm64/kernel/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index ea90d3bd9253..018a33e01b0e 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -152,8 +152,8 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) pr_crit("CPU%u: died during early boot\n", cpu); break; } - /* Fall through */ pr_crit("CPU%u: may not have shut down cleanly\n", cpu); + /* Fall through */ case CPU_STUCK_IN_KERNEL: pr_crit("CPU%u: is stuck in kernel\n", cpu); if (status & CPU_STUCK_REASON_52_BIT_VA) -- cgit From eca92a53a6ab9f27f1b61dcb3e16ebef75f0d5bb Mon Sep 17 00:00:00 2001 From: Anders Roxell Date: Fri, 26 Jul 2019 13:27:21 +0200 Subject: arm64: module: Mark expected switch fall-through MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When fall-through warnings was enabled by default the following warnings was starting to show up: ../arch/arm64/kernel/module.c: In function ‘apply_relocate_add’: ../arch/arm64/kernel/module.c:316:19: warning: this statement may fall through [-Wimplicit-fallthrough=] overflow_check = false; ~~~~~~~~~~~~~~~^~~~~~~ ../arch/arm64/kernel/module.c:317:3: note: here case R_AARCH64_MOVW_UABS_G0: ^~~~ ../arch/arm64/kernel/module.c:322:19: warning: this statement may fall through [-Wimplicit-fallthrough=] overflow_check = false; ~~~~~~~~~~~~~~~^~~~~~~ ../arch/arm64/kernel/module.c:323:3: note: here case R_AARCH64_MOVW_UABS_G1: ^~~~ Rework so that the compiler doesn't warn about fall-through. Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning") Signed-off-by: Anders Roxell Signed-off-by: Will Deacon --- arch/arm64/kernel/module.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c index 46e643e30708..03ff15bffbb6 100644 --- a/arch/arm64/kernel/module.c +++ b/arch/arm64/kernel/module.c @@ -314,18 +314,21 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, /* MOVW instruction relocations. */ case R_AARCH64_MOVW_UABS_G0_NC: overflow_check = false; + /* Fall through */ case R_AARCH64_MOVW_UABS_G0: ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 0, AARCH64_INSN_IMM_MOVKZ); break; case R_AARCH64_MOVW_UABS_G1_NC: overflow_check = false; + /* Fall through */ case R_AARCH64_MOVW_UABS_G1: ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 16, AARCH64_INSN_IMM_MOVKZ); break; case R_AARCH64_MOVW_UABS_G2_NC: overflow_check = false; + /* Fall through */ case R_AARCH64_MOVW_UABS_G2: ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 32, AARCH64_INSN_IMM_MOVKZ); @@ -393,6 +396,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, break; case R_AARCH64_ADR_PREL_PG_HI21_NC: overflow_check = false; + /* Fall through */ case R_AARCH64_ADR_PREL_PG_HI21: ovf = reloc_insn_adrp(me, sechdrs, loc, val); if (ovf && ovf != -ERANGE) -- cgit From ac65bdfef14a902b40ff69a35f5c604dba096547 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 19 Jun 2019 18:01:35 +0100 Subject: drm/i915: Keep rings pinned while the context is active Remember to keep the rings pinned as well as the context image until the GPU is no longer active. v2: Introduce a ring->pin_count primarily to hide the mock_ring that doesn't fit into the normal GGTT vma picture. v3: Order is important in teardown, ringbuffer submission needs to drop the pin count on the engine->kernel_context before it can gleefully free its ring. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110946 Fixes: ce476c80b8bf ("drm/i915: Keep contexts pinned until after the next kernel context switch") Signed-off-by: Chris Wilson Cc: Mika Kuoppala Cc: Tvrtko Ursulin Reviewed-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20190619170135.15281-1-chris@chris-wilson.co.uk (cherry picked from commit 09c5ab384f6fb30f834a5777888b4486dd7f015d) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_context.c | 27 ++++++++++++++++-------- drivers/gpu/drm/i915/gt/intel_engine_types.h | 12 +++++++++++ drivers/gpu/drm/i915/gt/intel_lrc.c | 10 ++------- drivers/gpu/drm/i915/gt/intel_ringbuffer.c | 31 ++++++++++++++++++---------- drivers/gpu/drm/i915/gt/mock_engine.c | 1 + 5 files changed, 53 insertions(+), 28 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_context.c b/drivers/gpu/drm/i915/gt/intel_context.c index 2c454f227c2e..23120901c55f 100644 --- a/drivers/gpu/drm/i915/gt/intel_context.c +++ b/drivers/gpu/drm/i915/gt/intel_context.c @@ -126,6 +126,7 @@ static void intel_context_retire(struct i915_active *active) if (ce->state) __context_unpin_state(ce->state); + intel_ring_unpin(ce->ring); intel_context_put(ce); } @@ -160,27 +161,35 @@ int intel_context_active_acquire(struct intel_context *ce, unsigned long flags) intel_context_get(ce); + err = intel_ring_pin(ce->ring); + if (err) + goto err_put; + if (!ce->state) return 0; err = __context_pin_state(ce->state, flags); - if (err) { - i915_active_cancel(&ce->active); - intel_context_put(ce); - return err; - } + if (err) + goto err_ring; /* Preallocate tracking nodes */ if (!i915_gem_context_is_kernel(ce->gem_context)) { err = i915_active_acquire_preallocate_barrier(&ce->active, ce->engine); - if (err) { - i915_active_release(&ce->active); - return err; - } + if (err) + goto err_state; } return 0; + +err_state: + __context_unpin_state(ce->state); +err_ring: + intel_ring_unpin(ce->ring); +err_put: + intel_context_put(ce); + i915_active_cancel(&ce->active); + return err; } void intel_context_active_release(struct intel_context *ce) diff --git a/drivers/gpu/drm/i915/gt/intel_engine_types.h b/drivers/gpu/drm/i915/gt/intel_engine_types.h index 868b220214f8..43e975a26016 100644 --- a/drivers/gpu/drm/i915/gt/intel_engine_types.h +++ b/drivers/gpu/drm/i915/gt/intel_engine_types.h @@ -70,6 +70,18 @@ struct intel_ring { struct list_head request_list; struct list_head active_link; + /* + * As we have two types of rings, one global to the engine used + * by ringbuffer submission and those that are exclusive to a + * context used by execlists, we have to play safe and allow + * atomic updates to the pin_count. However, the actual pinning + * of the context is either done during initialisation for + * ringbuffer submission or serialised as part of the context + * pinning for execlists, and so we do not need a mutex ourselves + * to serialise intel_ring_pin/intel_ring_unpin. + */ + atomic_t pin_count; + u32 head; u32 tail; u32 emit; diff --git a/drivers/gpu/drm/i915/gt/intel_lrc.c b/drivers/gpu/drm/i915/gt/intel_lrc.c index b42b5f158295..82b7ace62d97 100644 --- a/drivers/gpu/drm/i915/gt/intel_lrc.c +++ b/drivers/gpu/drm/i915/gt/intel_lrc.c @@ -1414,6 +1414,7 @@ static void execlists_context_destroy(struct kref *kref) { struct intel_context *ce = container_of(kref, typeof(*ce), ref); + GEM_BUG_ON(!i915_active_is_idle(&ce->active)); GEM_BUG_ON(intel_context_is_pinned(ce)); if (ce->state) @@ -1426,7 +1427,6 @@ static void execlists_context_unpin(struct intel_context *ce) { i915_gem_context_unpin_hw_id(ce->gem_context); i915_gem_object_unpin_map(ce->state->obj); - intel_ring_unpin(ce->ring); } static void @@ -1478,13 +1478,9 @@ __execlists_context_pin(struct intel_context *ce, goto unpin_active; } - ret = intel_ring_pin(ce->ring); - if (ret) - goto unpin_map; - ret = i915_gem_context_pin_hw_id(ce->gem_context); if (ret) - goto unpin_ring; + goto unpin_map; ce->lrc_desc = lrc_descriptor(ce, engine); ce->lrc_reg_state = vaddr + LRC_STATE_PN * PAGE_SIZE; @@ -1492,8 +1488,6 @@ __execlists_context_pin(struct intel_context *ce, return 0; -unpin_ring: - intel_ring_unpin(ce->ring); unpin_map: i915_gem_object_unpin_map(ce->state->obj); unpin_active: diff --git a/drivers/gpu/drm/i915/gt/intel_ringbuffer.c b/drivers/gpu/drm/i915/gt/intel_ringbuffer.c index c6023bc9452d..12010e798868 100644 --- a/drivers/gpu/drm/i915/gt/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/gt/intel_ringbuffer.c @@ -1149,16 +1149,16 @@ i915_emit_bb_start(struct i915_request *rq, int intel_ring_pin(struct intel_ring *ring) { struct i915_vma *vma = ring->vma; - enum i915_map_type map = i915_coherent_map_type(vma->vm->i915); unsigned int flags; void *addr; int ret; - GEM_BUG_ON(ring->vaddr); + if (atomic_fetch_inc(&ring->pin_count)) + return 0; ret = i915_timeline_pin(ring->timeline); if (ret) - return ret; + goto err_unpin; flags = PIN_GLOBAL; @@ -1172,26 +1172,31 @@ int intel_ring_pin(struct intel_ring *ring) ret = i915_vma_pin(vma, 0, 0, flags); if (unlikely(ret)) - goto unpin_timeline; + goto err_timeline; if (i915_vma_is_map_and_fenceable(vma)) addr = (void __force *)i915_vma_pin_iomap(vma); else - addr = i915_gem_object_pin_map(vma->obj, map); + addr = i915_gem_object_pin_map(vma->obj, + i915_coherent_map_type(vma->vm->i915)); if (IS_ERR(addr)) { ret = PTR_ERR(addr); - goto unpin_ring; + goto err_ring; } vma->obj->pin_global++; + GEM_BUG_ON(ring->vaddr); ring->vaddr = addr; + return 0; -unpin_ring: +err_ring: i915_vma_unpin(vma); -unpin_timeline: +err_timeline: i915_timeline_unpin(ring->timeline); +err_unpin: + atomic_dec(&ring->pin_count); return ret; } @@ -1207,16 +1212,19 @@ void intel_ring_reset(struct intel_ring *ring, u32 tail) void intel_ring_unpin(struct intel_ring *ring) { - GEM_BUG_ON(!ring->vma); - GEM_BUG_ON(!ring->vaddr); + if (!atomic_dec_and_test(&ring->pin_count)) + return; /* Discard any unused bytes beyond that submitted to hw. */ intel_ring_reset(ring, ring->tail); + GEM_BUG_ON(!ring->vma); if (i915_vma_is_map_and_fenceable(ring->vma)) i915_vma_unpin_iomap(ring->vma); else i915_gem_object_unpin_map(ring->vma->obj); + + GEM_BUG_ON(!ring->vaddr); ring->vaddr = NULL; ring->vma->obj->pin_global--; @@ -2081,10 +2089,11 @@ static void ring_destroy(struct intel_engine_cs *engine) WARN_ON(INTEL_GEN(dev_priv) > 2 && (ENGINE_READ(engine, RING_MI_MODE) & MODE_IDLE) == 0); + intel_engine_cleanup_common(engine); + intel_ring_unpin(engine->buffer); intel_ring_put(engine->buffer); - intel_engine_cleanup_common(engine); kfree(engine); } diff --git a/drivers/gpu/drm/i915/gt/mock_engine.c b/drivers/gpu/drm/i915/gt/mock_engine.c index 086801b51441..486c6953dcb1 100644 --- a/drivers/gpu/drm/i915/gt/mock_engine.c +++ b/drivers/gpu/drm/i915/gt/mock_engine.c @@ -66,6 +66,7 @@ static struct intel_ring *mock_ring(struct intel_engine_cs *engine) ring->base.effective_size = sz; ring->base.vaddr = (void *)(ring + 1); ring->base.timeline = &ring->timeline; + atomic_set(&ring->base.pin_count, 1); INIT_LIST_HEAD(&ring->base.request_list); intel_ring_update_space(&ring->base); -- cgit From 248f883db61283b4f5a1c92a5e27277377b09f16 Mon Sep 17 00:00:00 2001 From: Kenneth Graunke Date: Tue, 25 Jun 2019 10:06:55 +0100 Subject: drm/i915: Disable SAMPLER_STATE prefetching on all Gen11 steppings. The Demand Prefetch workaround (binding table prefetching) only applies to Icelake A0/B0. But the Sampler Prefetch workaround needs to be applied to all Gen11 steppings, according to a programming note in the SARCHKMD documentation. Using the Intel Gallium driver, I have seen intermittent failures in the dEQP-GLES31.functional.copy_image.non_compressed.* tests. After applying this workaround, the tests reliably pass. v2: Remove the overlap with a pre-production w/a BSpec: 9663 Signed-off-by: Kenneth Graunke Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Reviewed-by: Mika Kuoppala Link: https://patchwork.freedesktop.org/patch/msgid/20190625090655.19220-1-chris@chris-wilson.co.uk (cherry picked from commit f9a393875d3af13cc3267477746608dadb7f17c1) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_workarounds.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_workarounds.c b/drivers/gpu/drm/i915/gt/intel_workarounds.c index 15e90fd2cfdc..50c0060509a6 100644 --- a/drivers/gpu/drm/i915/gt/intel_workarounds.c +++ b/drivers/gpu/drm/i915/gt/intel_workarounds.c @@ -1258,8 +1258,12 @@ rcs_engine_wa_init(struct intel_engine_cs *engine, struct i915_wa_list *wal) if (IS_ICL_REVID(i915, ICL_REVID_A0, ICL_REVID_B0)) wa_write_or(wal, GEN7_SARCHKMD, - GEN7_DISABLE_DEMAND_PREFETCH | - GEN7_DISABLE_SAMPLER_PREFETCH); + GEN7_DISABLE_DEMAND_PREFETCH); + + /* Wa_1606682166:icl */ + wa_write_or(wal, + GEN7_SARCHKMD, + GEN7_DISABLE_SAMPLER_PREFETCH); } if (IS_GEN_RANGE(i915, 9, 11)) { -- cgit From 95eef14cdad150fed43147bcd4f29eea3d0a3f03 Mon Sep 17 00:00:00 2001 From: Lionel Landwerlin Date: Mon, 10 Jun 2019 11:19:14 +0300 Subject: drm/i915/perf: fix ICL perf register offsets We got the wrong offsets (could they have changed?). New values were computed off an error state by looking up the register offset in the context image as written by the HW. Signed-off-by: Lionel Landwerlin Fixes: 1de401c08fa805 ("drm/i915/perf: enable perf support on ICL") Cc: # v4.18+ Acked-by: Kenneth Graunke Link: https://patchwork.freedesktop.org/patch/msgid/20190610081914.25428-1-lionel.g.landwerlin@intel.com (cherry picked from commit 8dcfdfb4501012a8d36d2157dc73925715f2befb) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_perf.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c index a700c5c3d167..1ae06a1b6749 100644 --- a/drivers/gpu/drm/i915/i915_perf.c +++ b/drivers/gpu/drm/i915/i915_perf.c @@ -3477,9 +3477,13 @@ void i915_perf_init(struct drm_i915_private *dev_priv) dev_priv->perf.oa.ops.enable_metric_set = gen8_enable_metric_set; dev_priv->perf.oa.ops.disable_metric_set = gen10_disable_metric_set; - dev_priv->perf.oa.ctx_oactxctrl_offset = 0x128; - dev_priv->perf.oa.ctx_flexeu0_offset = 0x3de; - + if (IS_GEN(dev_priv, 10)) { + dev_priv->perf.oa.ctx_oactxctrl_offset = 0x128; + dev_priv->perf.oa.ctx_flexeu0_offset = 0x3de; + } else { + dev_priv->perf.oa.ctx_oactxctrl_offset = 0x124; + dev_priv->perf.oa.ctx_flexeu0_offset = 0x78e; + } dev_priv->perf.oa.gen8_valid_ctx_bit = (1<<16); } } -- cgit From 7d3cd66261665da491d0ee582beabe23df60f983 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 19 Jun 2019 20:08:39 +0300 Subject: drm/i915: Fix various tracepoints for gen2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Gen2 doesn't have a frame counter and apparently we no longer provide a fake .get_vblank_counter() hook for it. That means all tracepoints calling that hook will oops. Update the tracepoints to use intel_crtc_get_vblank_counter() which will gracefully fall back to using the software counter. This is actually a better approach since we now get (hopefully accurate) frame numbers in the traces. This also gets rid of the raw driver->get_vblank_counter() calls, which we need to do in order to switch to the per-crtc vblank vfuncs. v2: Deal with new tracepoints v3: Use a distinct variable name for the internal crtc iterator (Chris) Cc: Shawn Guo Cc: Daniel Vetter Fixes: 967dd4841787 ("drm: remove drm_vblank_no_hw_counter assignment from driver code") Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20190619170842.20579-2-ville.syrjala@linux.intel.com (cherry picked from commit 4c888e7bd26f58deb27c2e6ddc90000b89ee9393) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_display.c | 4 +- drivers/gpu/drm/i915/i915_trace.h | 76 ++++++++++++---------------- 2 files changed, 35 insertions(+), 45 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c index 30b97ded6fdd..592b92782fab 100644 --- a/drivers/gpu/drm/i915/display/intel_display.c +++ b/drivers/gpu/drm/i915/display/intel_display.c @@ -1839,7 +1839,7 @@ static void intel_enable_pipe(const struct intel_crtc_state *new_crtc_state) /* FIXME: assert CPU port conditions for SNB+ */ } - trace_intel_pipe_enable(dev_priv, pipe); + trace_intel_pipe_enable(crtc); reg = PIPECONF(cpu_transcoder); val = I915_READ(reg); @@ -1880,7 +1880,7 @@ static void intel_disable_pipe(const struct intel_crtc_state *old_crtc_state) */ assert_planes_disabled(crtc); - trace_intel_pipe_disable(dev_priv, pipe); + trace_intel_pipe_disable(crtc); reg = PIPECONF(cpu_transcoder); val = I915_READ(reg); diff --git a/drivers/gpu/drm/i915/i915_trace.h b/drivers/gpu/drm/i915/i915_trace.h index f4ce643b3bc3..cce426b23a24 100644 --- a/drivers/gpu/drm/i915/i915_trace.h +++ b/drivers/gpu/drm/i915/i915_trace.h @@ -21,24 +21,22 @@ /* watermark/fifo updates */ TRACE_EVENT(intel_pipe_enable, - TP_PROTO(struct drm_i915_private *dev_priv, enum pipe pipe), - TP_ARGS(dev_priv, pipe), + TP_PROTO(struct intel_crtc *crtc), + TP_ARGS(crtc), TP_STRUCT__entry( __array(u32, frame, 3) __array(u32, scanline, 3) __field(enum pipe, pipe) ), - TP_fast_assign( - enum pipe _pipe; - for_each_pipe(dev_priv, _pipe) { - __entry->frame[_pipe] = - dev_priv->drm.driver->get_vblank_counter(&dev_priv->drm, _pipe); - __entry->scanline[_pipe] = - intel_get_crtc_scanline(intel_get_crtc_for_pipe(dev_priv, _pipe)); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + struct intel_crtc *it__; + for_each_intel_crtc(&dev_priv->drm, it__) { + __entry->frame[it__->pipe] = intel_crtc_get_vblank_counter(it__); + __entry->scanline[it__->pipe] = intel_get_crtc_scanline(it__); } - __entry->pipe = pipe; + __entry->pipe = crtc->pipe; ), TP_printk("pipe %c enable, pipe A: frame=%u, scanline=%u, pipe B: frame=%u, scanline=%u, pipe C: frame=%u, scanline=%u", @@ -49,8 +47,8 @@ TRACE_EVENT(intel_pipe_enable, ); TRACE_EVENT(intel_pipe_disable, - TP_PROTO(struct drm_i915_private *dev_priv, enum pipe pipe), - TP_ARGS(dev_priv, pipe), + TP_PROTO(struct intel_crtc *crtc), + TP_ARGS(crtc), TP_STRUCT__entry( __array(u32, frame, 3) @@ -59,14 +57,13 @@ TRACE_EVENT(intel_pipe_disable, ), TP_fast_assign( - enum pipe _pipe; - for_each_pipe(dev_priv, _pipe) { - __entry->frame[_pipe] = - dev_priv->drm.driver->get_vblank_counter(&dev_priv->drm, _pipe); - __entry->scanline[_pipe] = - intel_get_crtc_scanline(intel_get_crtc_for_pipe(dev_priv, _pipe)); + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); + struct intel_crtc *it__; + for_each_intel_crtc(&dev_priv->drm, it__) { + __entry->frame[it__->pipe] = intel_crtc_get_vblank_counter(it__); + __entry->scanline[it__->pipe] = intel_get_crtc_scanline(it__); } - __entry->pipe = pipe; + __entry->pipe = crtc->pipe; ), TP_printk("pipe %c disable, pipe A: frame=%u, scanline=%u, pipe B: frame=%u, scanline=%u, pipe C: frame=%u, scanline=%u", @@ -89,8 +86,7 @@ TRACE_EVENT(intel_pipe_crc, TP_fast_assign( __entry->pipe = crtc->pipe; - __entry->frame = crtc->base.dev->driver->get_vblank_counter(crtc->base.dev, - crtc->pipe); + __entry->frame = intel_crtc_get_vblank_counter(crtc); __entry->scanline = intel_get_crtc_scanline(crtc); memcpy(__entry->crcs, crcs, sizeof(__entry->crcs)); ), @@ -112,9 +108,10 @@ TRACE_EVENT(intel_cpu_fifo_underrun, ), TP_fast_assign( + struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe); __entry->pipe = pipe; - __entry->frame = dev_priv->drm.driver->get_vblank_counter(&dev_priv->drm, pipe); - __entry->scanline = intel_get_crtc_scanline(intel_get_crtc_for_pipe(dev_priv, pipe)); + __entry->frame = intel_crtc_get_vblank_counter(crtc); + __entry->scanline = intel_get_crtc_scanline(crtc); ), TP_printk("pipe %c, frame=%u, scanline=%u", @@ -134,9 +131,10 @@ TRACE_EVENT(intel_pch_fifo_underrun, TP_fast_assign( enum pipe pipe = pch_transcoder; + struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe); __entry->pipe = pipe; - __entry->frame = dev_priv->drm.driver->get_vblank_counter(&dev_priv->drm, pipe); - __entry->scanline = intel_get_crtc_scanline(intel_get_crtc_for_pipe(dev_priv, pipe)); + __entry->frame = intel_crtc_get_vblank_counter(crtc); + __entry->scanline = intel_get_crtc_scanline(crtc); ), TP_printk("pch transcoder %c, frame=%u, scanline=%u", @@ -156,12 +154,10 @@ TRACE_EVENT(intel_memory_cxsr, ), TP_fast_assign( - enum pipe pipe; - for_each_pipe(dev_priv, pipe) { - __entry->frame[pipe] = - dev_priv->drm.driver->get_vblank_counter(&dev_priv->drm, pipe); - __entry->scanline[pipe] = - intel_get_crtc_scanline(intel_get_crtc_for_pipe(dev_priv, pipe)); + struct intel_crtc *crtc; + for_each_intel_crtc(&dev_priv->drm, crtc) { + __entry->frame[crtc->pipe] = intel_crtc_get_vblank_counter(crtc); + __entry->scanline[crtc->pipe] = intel_get_crtc_scanline(crtc); } __entry->old = old; __entry->new = new; @@ -198,8 +194,7 @@ TRACE_EVENT(g4x_wm, TP_fast_assign( __entry->pipe = crtc->pipe; - __entry->frame = crtc->base.dev->driver->get_vblank_counter(crtc->base.dev, - crtc->pipe); + __entry->frame = intel_crtc_get_vblank_counter(crtc); __entry->scanline = intel_get_crtc_scanline(crtc); __entry->primary = wm->pipe[crtc->pipe].plane[PLANE_PRIMARY]; __entry->sprite = wm->pipe[crtc->pipe].plane[PLANE_SPRITE0]; @@ -243,8 +238,7 @@ TRACE_EVENT(vlv_wm, TP_fast_assign( __entry->pipe = crtc->pipe; - __entry->frame = crtc->base.dev->driver->get_vblank_counter(crtc->base.dev, - crtc->pipe); + __entry->frame = intel_crtc_get_vblank_counter(crtc); __entry->scanline = intel_get_crtc_scanline(crtc); __entry->level = wm->level; __entry->cxsr = wm->cxsr; @@ -278,8 +272,7 @@ TRACE_EVENT(vlv_fifo_size, TP_fast_assign( __entry->pipe = crtc->pipe; - __entry->frame = crtc->base.dev->driver->get_vblank_counter(crtc->base.dev, - crtc->pipe); + __entry->frame = intel_crtc_get_vblank_counter(crtc); __entry->scanline = intel_get_crtc_scanline(crtc); __entry->sprite0_start = sprite0_start; __entry->sprite1_start = sprite1_start; @@ -310,8 +303,7 @@ TRACE_EVENT(intel_update_plane, TP_fast_assign( __entry->pipe = crtc->pipe; __entry->name = plane->name; - __entry->frame = crtc->base.dev->driver->get_vblank_counter(crtc->base.dev, - crtc->pipe); + __entry->frame = intel_crtc_get_vblank_counter(crtc); __entry->scanline = intel_get_crtc_scanline(crtc); memcpy(__entry->src, &plane->state->src, sizeof(__entry->src)); memcpy(__entry->dst, &plane->state->dst, sizeof(__entry->dst)); @@ -338,8 +330,7 @@ TRACE_EVENT(intel_disable_plane, TP_fast_assign( __entry->pipe = crtc->pipe; __entry->name = plane->name; - __entry->frame = crtc->base.dev->driver->get_vblank_counter(crtc->base.dev, - crtc->pipe); + __entry->frame = intel_crtc_get_vblank_counter(crtc); __entry->scanline = intel_get_crtc_scanline(crtc); ), @@ -364,8 +355,7 @@ TRACE_EVENT(i915_pipe_update_start, TP_fast_assign( __entry->pipe = crtc->pipe; - __entry->frame = crtc->base.dev->driver->get_vblank_counter(crtc->base.dev, - crtc->pipe); + __entry->frame = intel_crtc_get_vblank_counter(crtc); __entry->scanline = intel_get_crtc_scanline(crtc); __entry->min = crtc->debug.min_vbl; __entry->max = crtc->debug.max_vbl; -- cgit From b830f94f7303a49d509d5b1bb34ecb2e648b23c4 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 26 Jul 2019 12:49:00 -0300 Subject: tools headers UAPI: Update tools's copy of mman.h headers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To pick up the changes from: 8aa3c927ec10 ("mm/mmap: move common defines to mman-common.h") 22fcea6f85f2 ("mm: move MAP_SYNC to asm-generic/mman-common.h") 0bf5f9492389 ("mm: fix the MAP_UNINITIALIZED flag") To address the following perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h' diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman.h' differs from latest version at 'include/uapi/asm-generic/mman.h' diff -u tools/include/uapi/asm-generic/mman.h include/uapi/asm-generic/mman.h That ends up just moving a bit the auto-generated code->string tables: $ tools/perf/trace/beauty/mmap_flags.sh > before $ cp include/uapi/asm-generic/mman.h tools/include/uapi/asm-generic/mman.h $ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h $ tools/perf/trace/beauty/mmap_flags.sh > after $ diff -u before after --- before 2019-07-26 12:45:02.948335904 -0300 +++ after 2019-07-26 12:48:05.342893539 -0300 @@ -4,15 +4,15 @@ [ilog2(0x02) + 1] = "PRIVATE", [ilog2(0x10) + 1] = "FIXED", [ilog2(0x20) + 1] = "ANONYMOUS", + [ilog2(0x008000) + 1] = "POPULATE", + [ilog2(0x010000) + 1] = "NONBLOCK", + [ilog2(0x020000) + 1] = "STACK", + [ilog2(0x040000) + 1] = "HUGETLB", + [ilog2(0x080000) + 1] = "SYNC", [ilog2(0x100000) + 1] = "FIXED_NOREPLACE", [ilog2(0x0100) + 1] = "GROWSDOWN", [ilog2(0x0800) + 1] = "DENYWRITE", [ilog2(0x1000) + 1] = "EXECUTABLE", [ilog2(0x2000) + 1] = "LOCKED", [ilog2(0x4000) + 1] = "NORESERVE", - [ilog2(0x8000) + 1] = "POPULATE", - [ilog2(0x10000) + 1] = "NONBLOCK", - [ilog2(0x20000) + 1] = "STACK", - [ilog2(0x40000) + 1] = "HUGETLB", - [ilog2(0x80000) + 1] = "SYNC", }; $ Cc: Adrian Hunter Cc: Aneesh Kumar K.V Cc: Christoph Hellwig Cc: Jiri Olsa Cc: Luis Cláudio Gonçalves Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-fzqvzni9megaurmsp0k4vy27@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/arch/powerpc/include/uapi/asm/mman.h | 4 ---- tools/arch/sparc/include/uapi/asm/mman.h | 4 ---- tools/include/uapi/asm-generic/mman-common.h | 15 +++++++++------ tools/include/uapi/asm-generic/mman.h | 10 ++++------ 4 files changed, 13 insertions(+), 20 deletions(-) diff --git a/tools/arch/powerpc/include/uapi/asm/mman.h b/tools/arch/powerpc/include/uapi/asm/mman.h index f33105bc5ca6..8601d824a9c6 100644 --- a/tools/arch/powerpc/include/uapi/asm/mman.h +++ b/tools/arch/powerpc/include/uapi/asm/mman.h @@ -4,12 +4,8 @@ #define MAP_DENYWRITE 0x0800 #define MAP_EXECUTABLE 0x1000 #define MAP_GROWSDOWN 0x0100 -#define MAP_HUGETLB 0x40000 #define MAP_LOCKED 0x80 -#define MAP_NONBLOCK 0x10000 #define MAP_NORESERVE 0x40 -#define MAP_POPULATE 0x8000 -#define MAP_STACK 0x20000 #include /* MAP_32BIT is undefined on powerpc, fix it for perf */ #define MAP_32BIT 0 diff --git a/tools/arch/sparc/include/uapi/asm/mman.h b/tools/arch/sparc/include/uapi/asm/mman.h index 38920eed8cbf..7b94dccc843d 100644 --- a/tools/arch/sparc/include/uapi/asm/mman.h +++ b/tools/arch/sparc/include/uapi/asm/mman.h @@ -4,12 +4,8 @@ #define MAP_DENYWRITE 0x0800 #define MAP_EXECUTABLE 0x1000 #define MAP_GROWSDOWN 0x0200 -#define MAP_HUGETLB 0x40000 #define MAP_LOCKED 0x100 -#define MAP_NONBLOCK 0x10000 #define MAP_NORESERVE 0x40 -#define MAP_POPULATE 0x8000 -#define MAP_STACK 0x20000 #include /* MAP_32BIT is undefined on sparc, fix it for perf */ #define MAP_32BIT 0 diff --git a/tools/include/uapi/asm-generic/mman-common.h b/tools/include/uapi/asm-generic/mman-common.h index abd238d0f7a4..63b1f506ea67 100644 --- a/tools/include/uapi/asm-generic/mman-common.h +++ b/tools/include/uapi/asm-generic/mman-common.h @@ -19,15 +19,18 @@ #define MAP_TYPE 0x0f /* Mask for type of mapping */ #define MAP_FIXED 0x10 /* Interpret addr exactly */ #define MAP_ANONYMOUS 0x20 /* don't use a file */ -#ifdef CONFIG_MMAP_ALLOW_UNINITIALIZED -# define MAP_UNINITIALIZED 0x4000000 /* For anonymous mmap, memory could be uninitialized */ -#else -# define MAP_UNINITIALIZED 0x0 /* Don't support this flag */ -#endif -/* 0x0100 - 0x80000 flags are defined in asm-generic/mman.h */ +/* 0x0100 - 0x4000 flags are defined in asm-generic/mman.h */ +#define MAP_POPULATE 0x008000 /* populate (prefault) pagetables */ +#define MAP_NONBLOCK 0x010000 /* do not block on IO */ +#define MAP_STACK 0x020000 /* give out an address that is best suited for process/thread stacks */ +#define MAP_HUGETLB 0x040000 /* create a huge page mapping */ +#define MAP_SYNC 0x080000 /* perform synchronous page faults for the mapping */ #define MAP_FIXED_NOREPLACE 0x100000 /* MAP_FIXED which doesn't unmap underlying mapping */ +#define MAP_UNINITIALIZED 0x4000000 /* For anonymous mmap, memory could be + * uninitialized */ + /* * Flags for mlock */ diff --git a/tools/include/uapi/asm-generic/mman.h b/tools/include/uapi/asm-generic/mman.h index 36c197fc44a0..406f7718f9ad 100644 --- a/tools/include/uapi/asm-generic/mman.h +++ b/tools/include/uapi/asm-generic/mman.h @@ -9,13 +9,11 @@ #define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ #define MAP_LOCKED 0x2000 /* pages are locked */ #define MAP_NORESERVE 0x4000 /* don't check for reservations */ -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ -#define MAP_STACK 0x20000 /* give out an address that is best suited for process/thread stacks */ -#define MAP_HUGETLB 0x40000 /* create a huge page mapping */ -#define MAP_SYNC 0x80000 /* perform synchronous page faults for the mapping */ -/* Bits [26:31] are reserved, see mman-common.h for MAP_HUGETLB usage */ +/* + * Bits [26:31] are reserved, see asm-generic/hugetlb_encode.h + * for MAP_HUGETLB usage + */ #define MCL_CURRENT 1 /* lock all current mappings */ #define MCL_FUTURE 2 /* lock all future mappings */ -- cgit From 95dc663aa6382fec92674e748682cefeeb2bfc22 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 26 Jul 2019 15:00:24 -0300 Subject: tools headers UAPI: Update tools's copy of drm.h headers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Picking the changes from: c5d3e39caa45 ("drm/i915: Engine discovery query") a88b6e4cbafd ("drm/i915: Allow specification of parallel execbuf") ee1136908e9b ("drm/i915/execlists: Virtual engine bonding") 6d06779e8672 ("drm/i915: Load balancing across a virtual engine") b81dde719439 ("drm/i915: Allow userspace to clone contexts on creation") 8319f44c0525 ("drm/i915: Re-expose SINGLE_TIMELINE flags for context creation") e620f7b3a263 ("drm/i915: Extend I915_CONTEXT_PARAM_SSEU to support local ctx->engine[]") 976b55f0e1db ("drm/i915: Allow a context to define its set of engines") 7f3f317a66ca ("drm/i915: Restore control over ppgtt for context creation ABI") 75b3f1cb50bd ("drm: Fix drm.h uapi header for GNU/kFreeBSD") Silencing these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Now 'perf trace' and other code that might use the tools/perf/trace/beauty autogenerated tables will be able to translate this new ioctl code into a string: $ tools/perf/trace/beauty/drm_ioctl.sh > before $ cp include/uapi/drm/i915_drm.h tools/include/uapi/drm/i915_drm.h $ tools/perf/trace/beauty/drm_ioctl.sh > after $ diff -u before after --- before 2019-07-26 13:02:22.052723640 -0300 +++ after 2019-07-26 13:02:35.354906036 -0300 @@ -163,4 +163,6 @@ [DRM_COMMAND_BASE + 0x37] = "I915_PERF_ADD_CONFIG", [DRM_COMMAND_BASE + 0x38] = "I915_PERF_REMOVE_CONFIG", [DRM_COMMAND_BASE + 0x39] = "I915_QUERY", + [DRM_COMMAND_BASE + 0x3a] = "I915_GEM_VM_CREATE", + [DRM_COMMAND_BASE + 0x3b] = "I915_GEM_VM_DESTROY", }; $ Cc: Adrian Hunter Cc: Chris Wilson Cc: Eric Anholt Cc: James Clarke Cc: Jiri Olsa Cc: Luis Cláudio Gonçalves Cc: Namhyung Kim Cc: Tvrtko Ursulin Link: https://lkml.kernel.org/n/tip-a9173whgu3h1vo24jgdg5do8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/drm/drm.h | 1 + tools/include/uapi/drm/i915_drm.h | 209 +++++++++++++++++++++++++++++++++++++- 2 files changed, 207 insertions(+), 3 deletions(-) diff --git a/tools/include/uapi/drm/drm.h b/tools/include/uapi/drm/drm.h index 661d73f9a919..8a5b2f8f8eb9 100644 --- a/tools/include/uapi/drm/drm.h +++ b/tools/include/uapi/drm/drm.h @@ -50,6 +50,7 @@ typedef unsigned int drm_handle_t; #else /* One of the BSDs */ +#include #include #include typedef int8_t __s8; diff --git a/tools/include/uapi/drm/i915_drm.h b/tools/include/uapi/drm/i915_drm.h index 3a73f5316766..328d05e77d9f 100644 --- a/tools/include/uapi/drm/i915_drm.h +++ b/tools/include/uapi/drm/i915_drm.h @@ -136,6 +136,8 @@ enum drm_i915_gem_engine_class { struct i915_engine_class_instance { __u16 engine_class; /* see enum drm_i915_gem_engine_class */ __u16 engine_instance; +#define I915_ENGINE_CLASS_INVALID_NONE -1 +#define I915_ENGINE_CLASS_INVALID_VIRTUAL -2 }; /** @@ -355,6 +357,8 @@ typedef struct _drm_i915_sarea { #define DRM_I915_PERF_ADD_CONFIG 0x37 #define DRM_I915_PERF_REMOVE_CONFIG 0x38 #define DRM_I915_QUERY 0x39 +#define DRM_I915_GEM_VM_CREATE 0x3a +#define DRM_I915_GEM_VM_DESTROY 0x3b /* Must be kept compact -- no holes */ #define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t) @@ -415,6 +419,8 @@ typedef struct _drm_i915_sarea { #define DRM_IOCTL_I915_PERF_ADD_CONFIG DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_ADD_CONFIG, struct drm_i915_perf_oa_config) #define DRM_IOCTL_I915_PERF_REMOVE_CONFIG DRM_IOW(DRM_COMMAND_BASE + DRM_I915_PERF_REMOVE_CONFIG, __u64) #define DRM_IOCTL_I915_QUERY DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_QUERY, struct drm_i915_query) +#define DRM_IOCTL_I915_GEM_VM_CREATE DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_VM_CREATE, struct drm_i915_gem_vm_control) +#define DRM_IOCTL_I915_GEM_VM_DESTROY DRM_IOW (DRM_COMMAND_BASE + DRM_I915_GEM_VM_DESTROY, struct drm_i915_gem_vm_control) /* Allow drivers to submit batchbuffers directly to hardware, relying * on the security mechanisms provided by hardware. @@ -598,6 +604,12 @@ typedef struct drm_i915_irq_wait { */ #define I915_PARAM_MMAP_GTT_COHERENT 52 +/* + * Query whether DRM_I915_GEM_EXECBUFFER2 supports coordination of parallel + * execution through use of explicit fence support. + * See I915_EXEC_FENCE_OUT and I915_EXEC_FENCE_SUBMIT. + */ +#define I915_PARAM_HAS_EXEC_SUBMIT_FENCE 53 /* Must be kept compact -- no holes and well documented */ typedef struct drm_i915_getparam { @@ -1120,7 +1132,16 @@ struct drm_i915_gem_execbuffer2 { */ #define I915_EXEC_FENCE_ARRAY (1<<19) -#define __I915_EXEC_UNKNOWN_FLAGS (-(I915_EXEC_FENCE_ARRAY<<1)) +/* + * Setting I915_EXEC_FENCE_SUBMIT implies that lower_32_bits(rsvd2) represent + * a sync_file fd to wait upon (in a nonblocking manner) prior to executing + * the batch. + * + * Returns -EINVAL if the sync_file fd cannot be found. + */ +#define I915_EXEC_FENCE_SUBMIT (1 << 20) + +#define __I915_EXEC_UNKNOWN_FLAGS (-(I915_EXEC_FENCE_SUBMIT << 1)) #define I915_EXEC_CONTEXT_ID_MASK (0xffffffff) #define i915_execbuffer2_set_context_id(eb2, context) \ @@ -1464,8 +1485,9 @@ struct drm_i915_gem_context_create_ext { __u32 ctx_id; /* output: id of new context*/ __u32 flags; #define I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS (1u << 0) +#define I915_CONTEXT_CREATE_FLAGS_SINGLE_TIMELINE (1u << 1) #define I915_CONTEXT_CREATE_FLAGS_UNKNOWN \ - (-(I915_CONTEXT_CREATE_FLAGS_USE_EXTENSIONS << 1)) + (-(I915_CONTEXT_CREATE_FLAGS_SINGLE_TIMELINE << 1)) __u64 extensions; }; @@ -1507,6 +1529,41 @@ struct drm_i915_gem_context_param { * On creation, all new contexts are marked as recoverable. */ #define I915_CONTEXT_PARAM_RECOVERABLE 0x8 + + /* + * The id of the associated virtual memory address space (ppGTT) of + * this context. Can be retrieved and passed to another context + * (on the same fd) for both to use the same ppGTT and so share + * address layouts, and avoid reloading the page tables on context + * switches between themselves. + * + * See DRM_I915_GEM_VM_CREATE and DRM_I915_GEM_VM_DESTROY. + */ +#define I915_CONTEXT_PARAM_VM 0x9 + +/* + * I915_CONTEXT_PARAM_ENGINES: + * + * Bind this context to operate on this subset of available engines. Henceforth, + * the I915_EXEC_RING selector for DRM_IOCTL_I915_GEM_EXECBUFFER2 operates as + * an index into this array of engines; I915_EXEC_DEFAULT selecting engine[0] + * and upwards. Slots 0...N are filled in using the specified (class, instance). + * Use + * engine_class: I915_ENGINE_CLASS_INVALID, + * engine_instance: I915_ENGINE_CLASS_INVALID_NONE + * to specify a gap in the array that can be filled in later, e.g. by a + * virtual engine used for load balancing. + * + * Setting the number of engines bound to the context to 0, by passing a zero + * sized argument, will revert back to default settings. + * + * See struct i915_context_param_engines. + * + * Extensions: + * i915_context_engines_load_balance (I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE) + * i915_context_engines_bond (I915_CONTEXT_ENGINES_EXT_BOND) + */ +#define I915_CONTEXT_PARAM_ENGINES 0xa /* Must be kept compact -- no holes and well documented */ __u64 value; @@ -1540,9 +1597,10 @@ struct drm_i915_gem_context_param_sseu { struct i915_engine_class_instance engine; /* - * Unused for now. Must be cleared to zero. + * Unknown flags must be cleared to zero. */ __u32 flags; +#define I915_CONTEXT_SSEU_FLAG_ENGINE_INDEX (1u << 0) /* * Mask of slices to enable for the context. Valid values are a subset @@ -1570,12 +1628,115 @@ struct drm_i915_gem_context_param_sseu { __u32 rsvd; }; +/* + * i915_context_engines_load_balance: + * + * Enable load balancing across this set of engines. + * + * Into the I915_EXEC_DEFAULT slot [0], a virtual engine is created that when + * used will proxy the execbuffer request onto one of the set of engines + * in such a way as to distribute the load evenly across the set. + * + * The set of engines must be compatible (e.g. the same HW class) as they + * will share the same logical GPU context and ring. + * + * To intermix rendering with the virtual engine and direct rendering onto + * the backing engines (bypassing the load balancing proxy), the context must + * be defined to use a single timeline for all engines. + */ +struct i915_context_engines_load_balance { + struct i915_user_extension base; + + __u16 engine_index; + __u16 num_siblings; + __u32 flags; /* all undefined flags must be zero */ + + __u64 mbz64; /* reserved for future use; must be zero */ + + struct i915_engine_class_instance engines[0]; +} __attribute__((packed)); + +#define I915_DEFINE_CONTEXT_ENGINES_LOAD_BALANCE(name__, N__) struct { \ + struct i915_user_extension base; \ + __u16 engine_index; \ + __u16 num_siblings; \ + __u32 flags; \ + __u64 mbz64; \ + struct i915_engine_class_instance engines[N__]; \ +} __attribute__((packed)) name__ + +/* + * i915_context_engines_bond: + * + * Constructed bonded pairs for execution within a virtual engine. + * + * All engines are equal, but some are more equal than others. Given + * the distribution of resources in the HW, it may be preferable to run + * a request on a given subset of engines in parallel to a request on a + * specific engine. We enable this selection of engines within a virtual + * engine by specifying bonding pairs, for any given master engine we will + * only execute on one of the corresponding siblings within the virtual engine. + * + * To execute a request in parallel on the master engine and a sibling requires + * coordination with a I915_EXEC_FENCE_SUBMIT. + */ +struct i915_context_engines_bond { + struct i915_user_extension base; + + struct i915_engine_class_instance master; + + __u16 virtual_index; /* index of virtual engine in ctx->engines[] */ + __u16 num_bonds; + + __u64 flags; /* all undefined flags must be zero */ + __u64 mbz64[4]; /* reserved for future use; must be zero */ + + struct i915_engine_class_instance engines[0]; +} __attribute__((packed)); + +#define I915_DEFINE_CONTEXT_ENGINES_BOND(name__, N__) struct { \ + struct i915_user_extension base; \ + struct i915_engine_class_instance master; \ + __u16 virtual_index; \ + __u16 num_bonds; \ + __u64 flags; \ + __u64 mbz64[4]; \ + struct i915_engine_class_instance engines[N__]; \ +} __attribute__((packed)) name__ + +struct i915_context_param_engines { + __u64 extensions; /* linked chain of extension blocks, 0 terminates */ +#define I915_CONTEXT_ENGINES_EXT_LOAD_BALANCE 0 /* see i915_context_engines_load_balance */ +#define I915_CONTEXT_ENGINES_EXT_BOND 1 /* see i915_context_engines_bond */ + struct i915_engine_class_instance engines[0]; +} __attribute__((packed)); + +#define I915_DEFINE_CONTEXT_PARAM_ENGINES(name__, N__) struct { \ + __u64 extensions; \ + struct i915_engine_class_instance engines[N__]; \ +} __attribute__((packed)) name__ + struct drm_i915_gem_context_create_ext_setparam { #define I915_CONTEXT_CREATE_EXT_SETPARAM 0 struct i915_user_extension base; struct drm_i915_gem_context_param param; }; +struct drm_i915_gem_context_create_ext_clone { +#define I915_CONTEXT_CREATE_EXT_CLONE 1 + struct i915_user_extension base; + __u32 clone_id; + __u32 flags; +#define I915_CONTEXT_CLONE_ENGINES (1u << 0) +#define I915_CONTEXT_CLONE_FLAGS (1u << 1) +#define I915_CONTEXT_CLONE_SCHEDATTR (1u << 2) +#define I915_CONTEXT_CLONE_SSEU (1u << 3) +#define I915_CONTEXT_CLONE_TIMELINE (1u << 4) +#define I915_CONTEXT_CLONE_VM (1u << 5) +#define I915_CONTEXT_CLONE_UNKNOWN -(I915_CONTEXT_CLONE_VM << 1) + __u64 rsvd; +}; + struct drm_i915_gem_context_destroy { __u32 ctx_id; __u32 pad; @@ -1821,6 +1982,7 @@ struct drm_i915_perf_oa_config { struct drm_i915_query_item { __u64 query_id; #define DRM_I915_QUERY_TOPOLOGY_INFO 1 +#define DRM_I915_QUERY_ENGINE_INFO 2 /* Must be kept compact -- no holes and well documented */ /* @@ -1919,6 +2081,47 @@ struct drm_i915_query_topology_info { __u8 data[]; }; +/** + * struct drm_i915_engine_info + * + * Describes one engine and it's capabilities as known to the driver. + */ +struct drm_i915_engine_info { + /** Engine class and instance. */ + struct i915_engine_class_instance engine; + + /** Reserved field. */ + __u32 rsvd0; + + /** Engine flags. */ + __u64 flags; + + /** Capabilities of this engine. */ + __u64 capabilities; +#define I915_VIDEO_CLASS_CAPABILITY_HEVC (1 << 0) +#define I915_VIDEO_AND_ENHANCE_CLASS_CAPABILITY_SFC (1 << 1) + + /** Reserved fields. */ + __u64 rsvd1[4]; +}; + +/** + * struct drm_i915_query_engine_info + * + * Engine info query enumerates all engines known to the driver by filling in + * an array of struct drm_i915_engine_info structures. + */ +struct drm_i915_query_engine_info { + /** Number of struct drm_i915_engine_info structs following. */ + __u32 num_engines; + + /** MBZ */ + __u32 rsvd[3]; + + /** Marker for drm_i915_engine_info structures. */ + struct drm_i915_engine_info engines[]; +}; + #if defined(__cplusplus) } #endif -- cgit From 7ee526152db7a75d7b8713346dac76ffc3662b29 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 26 Jul 2019 15:29:56 -0300 Subject: tools perf beauty: Fix usbdevfs_ioctl table generator to handle _IOC() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In addition to _IOW() and _IOR(), to handle this case: #define USBDEVFS_CONNINFO_EX(len) _IOC(_IOC_READ, 'U', 32, len) That will happen in the next sync of this header file. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Luis Cláudio Gonçalves Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-3br5e4t64e4lp0goo84che3s@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/trace/beauty/usbdevfs_ioctl.sh | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/tools/perf/trace/beauty/usbdevfs_ioctl.sh b/tools/perf/trace/beauty/usbdevfs_ioctl.sh index 930b80f422e8..aa597ae53747 100755 --- a/tools/perf/trace/beauty/usbdevfs_ioctl.sh +++ b/tools/perf/trace/beauty/usbdevfs_ioctl.sh @@ -3,10 +3,13 @@ [ $# -eq 1 ] && header_dir=$1 || header_dir=tools/include/uapi/linux/ +# also as: +# #define USBDEVFS_CONNINFO_EX(len) _IOC(_IOC_READ, 'U', 32, len) + printf "static const char *usbdevfs_ioctl_cmds[] = {\n" -regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)[[:space:]]+_IO[WR]{0,2}\([[:space:]]*'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*" -egrep $regex ${header_dir}/usbdevice_fs.h | egrep -v 'USBDEVFS_\w+32[[:space:]]' | \ - sed -r "s/$regex/\2 \1/g" | \ +regex="^#[[:space:]]*define[[:space:]]+USBDEVFS_(\w+)(\(\w+\))?[[:space:]]+_IO[CWR]{0,2}\([[:space:]]*(_IOC_\w+,[[:space:]]*)?'U'[[:space:]]*,[[:space:]]*([[:digit:]]+).*" +egrep "$regex" ${header_dir}/usbdevice_fs.h | egrep -v 'USBDEVFS_\w+32[[:space:]]' | \ + sed -r "s/$regex/\4 \1/g" | \ sort | xargs printf "\t[%s] = \"%s\",\n" printf "};\n\n" printf "#if 0\n" -- cgit From 0f58163c9d5702efbc242d144fd038e54b4c6ad0 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 26 Jul 2019 15:31:25 -0300 Subject: tools headers UAPI: Sync usbdevice_fs.h with the kernels to get new ioctl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To get the changes in: 6d101f24f1dd ("USB: add usbfs ioctl to retrieve the connection parameters") And address this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/usbdevice_fs.h' differs from latest version at 'include/uapi/linux/usbdevice_fs.h' diff -u tools/include/uapi/linux/usbdevice_fs.h include/uapi/linux/usbdevice_fs.h Which ends up autogenerating a ioctl_cmd->string table used by 'perf trace': $ tools/perf/trace/beauty/usbdevfs_ioctl.sh > before $ cp include/uapi/linux/usbdevice_fs.h tools/include/uapi/linux/usbdevice_fs.h $ tools/perf/trace/beauty/usbdevfs_ioctl.sh > after $ diff -u before after --- before 2019-07-26 15:26:55.513636844 -0300 +++ after 2019-07-26 15:29:11.650518677 -0300 @@ -23,6 +23,7 @@ [2] = "BULK", [30] = "DROP_PRIVILEGES", [31] = "GET_SPEED", + [32] = "CONNINFO_EX", [3] = "RESETEP", [4] = "SETINTERFACE", [5] = "SETCONFIGURATION", $ Now 'perf trace' ioctl beautifier will translate this new ioctl to a string and at some point will allow filtering the 'ioctl' syscall with something like this in a system wide strace-like sessin: # perf trace -e ioctl/cmd=USBDEVFS_CONNINFO_EX/ Cc: Adrian Hunter Cc: Dmitry Torokhov Cc: Greg Kroah-Hartman Cc: Jiri Olsa Cc: Luis Cláudio Gonçalves Cc: Namhyung Kim Link: https://lkml.kernel.org/n/tip-tkdfbgzqypwco96b309c0ovd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/usbdevice_fs.h | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/tools/include/uapi/linux/usbdevice_fs.h b/tools/include/uapi/linux/usbdevice_fs.h index 964e87217be4..78efe870c2b7 100644 --- a/tools/include/uapi/linux/usbdevice_fs.h +++ b/tools/include/uapi/linux/usbdevice_fs.h @@ -76,6 +76,26 @@ struct usbdevfs_connectinfo { unsigned char slow; }; +struct usbdevfs_conninfo_ex { + __u32 size; /* Size of the structure from the kernel's */ + /* point of view. Can be used by userspace */ + /* to determine how much data can be */ + /* used/trusted. */ + __u32 busnum; /* USB bus number, as enumerated by the */ + /* kernel, the device is connected to. */ + __u32 devnum; /* Device address on the bus. */ + __u32 speed; /* USB_SPEED_* constants from ch9.h */ + __u8 num_ports; /* Number of ports the device is connected */ + /* to on the way to the root hub. It may */ + /* be bigger than size of 'ports' array so */ + /* userspace can detect overflows. */ + __u8 ports[7]; /* List of ports on the way from the root */ + /* hub to the device. Current limit in */ + /* USB specification is 7 tiers (root hub, */ + /* 5 intermediate hubs, device), which */ + /* gives at most 6 port entries. */ +}; + #define USBDEVFS_URB_SHORT_NOT_OK 0x01 #define USBDEVFS_URB_ISO_ASAP 0x02 #define USBDEVFS_URB_BULK_CONTINUATION 0x04 @@ -137,6 +157,7 @@ struct usbdevfs_hub_portinfo { #define USBDEVFS_CAP_REAP_AFTER_DISCONNECT 0x10 #define USBDEVFS_CAP_MMAP 0x20 #define USBDEVFS_CAP_DROP_PRIVILEGES 0x40 +#define USBDEVFS_CAP_CONNINFO_EX 0x80 /* USBDEVFS_DISCONNECT_CLAIM flags & struct */ @@ -197,5 +218,10 @@ struct usbdevfs_streams { #define USBDEVFS_FREE_STREAMS _IOR('U', 29, struct usbdevfs_streams) #define USBDEVFS_DROP_PRIVILEGES _IOW('U', 30, __u32) #define USBDEVFS_GET_SPEED _IO('U', 31) +/* + * Returns struct usbdevfs_conninfo_ex; length is variable to allow + * extending size of the data returned. + */ +#define USBDEVFS_CONNINFO_EX(len) _IOC(_IOC_READ, 'U', 32, len) #endif /* _UAPI_LINUX_USBDEVICE_FS_H */ -- cgit From c093de6bd3c50d3dd597ff9fa5cf7a30acbb3eb7 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 26 Jul 2019 15:41:09 -0300 Subject: tools headers UAPI: Sync sched.h with the kernel MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To get the changes in: a509a7cd7974 ("sched/uclamp: Extend sched_setattr() to support utilization clamping") 1d6362fa0cfc ("sched/core: Allow sched_setattr() to use the current policy") 7f192e3cd316 ("fork: add clone3") And silence this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/sched.h' differs from latest version at 'include/uapi/linux/sched.h' diff -u tools/include/uapi/linux/sched.h include/uapi/linux/sched.h No changes in tools/ due to the above. Cc: Adrian Hunter Cc: Christian Brauner Cc: Jiri Olsa Cc: Luis Cláudio Gonçalves Cc: Namhyung Kim Cc: Patrick Bellasi Link: https://lkml.kernel.org/n/tip-mtrpsjrux5hgyr5uf8l1aa46@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/sched.h | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/tools/include/uapi/linux/sched.h b/tools/include/uapi/linux/sched.h index ed4ee170bee2..b3105ac1381a 100644 --- a/tools/include/uapi/linux/sched.h +++ b/tools/include/uapi/linux/sched.h @@ -2,6 +2,8 @@ #ifndef _UAPI_LINUX_SCHED_H #define _UAPI_LINUX_SCHED_H +#include + /* * cloning flags: */ @@ -31,6 +33,20 @@ #define CLONE_NEWNET 0x40000000 /* New network namespace */ #define CLONE_IO 0x80000000 /* Clone io context */ +/* + * Arguments for the clone3 syscall + */ +struct clone_args { + __aligned_u64 flags; + __aligned_u64 pidfd; + __aligned_u64 child_tid; + __aligned_u64 parent_tid; + __aligned_u64 exit_signal; + __aligned_u64 stack; + __aligned_u64 stack_size; + __aligned_u64 tls; +}; + /* * Scheduling policies */ @@ -51,9 +67,21 @@ #define SCHED_FLAG_RESET_ON_FORK 0x01 #define SCHED_FLAG_RECLAIM 0x02 #define SCHED_FLAG_DL_OVERRUN 0x04 +#define SCHED_FLAG_KEEP_POLICY 0x08 +#define SCHED_FLAG_KEEP_PARAMS 0x10 +#define SCHED_FLAG_UTIL_CLAMP_MIN 0x20 +#define SCHED_FLAG_UTIL_CLAMP_MAX 0x40 + +#define SCHED_FLAG_KEEP_ALL (SCHED_FLAG_KEEP_POLICY | \ + SCHED_FLAG_KEEP_PARAMS) + +#define SCHED_FLAG_UTIL_CLAMP (SCHED_FLAG_UTIL_CLAMP_MIN | \ + SCHED_FLAG_UTIL_CLAMP_MAX) #define SCHED_FLAG_ALL (SCHED_FLAG_RESET_ON_FORK | \ SCHED_FLAG_RECLAIM | \ - SCHED_FLAG_DL_OVERRUN) + SCHED_FLAG_DL_OVERRUN | \ + SCHED_FLAG_KEEP_ALL | \ + SCHED_FLAG_UTIL_CLAMP) #endif /* _UAPI_LINUX_SCHED_H */ -- cgit From e54599c93dbf487ef80ba2833c5760c22bd20c32 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 26 Jul 2019 15:44:41 -0300 Subject: tools headers UAPI: Sync if_link.h with the kernel MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To pick the changes in: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications") And silence this build warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h' Cc: Adrian Hunter Cc: David S. Miller Cc: Jiri Olsa Cc: Luis Cláudio Gonçalves Cc: Namhyung Kim Cc: Vincent Bernat Link: https://lkml.kernel.org/n/tip-3liw4exxh8goc0rq9xryl2kv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/include/uapi/linux/if_link.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/tools/include/uapi/linux/if_link.h b/tools/include/uapi/linux/if_link.h index 7d113a9602f0..4a8c02cafa9a 100644 --- a/tools/include/uapi/linux/if_link.h +++ b/tools/include/uapi/linux/if_link.h @@ -695,6 +695,7 @@ enum { IFLA_VF_IB_NODE_GUID, /* VF Infiniband node GUID */ IFLA_VF_IB_PORT_GUID, /* VF Infiniband port GUID */ IFLA_VF_VLAN_LIST, /* nested list of vlans, option for QinQ */ + IFLA_VF_BROADCAST, /* VF broadcast */ __IFLA_VF_MAX, }; @@ -705,6 +706,10 @@ struct ifla_vf_mac { __u8 mac[32]; /* MAX_ADDR_LEN */ }; +struct ifla_vf_broadcast { + __u8 broadcast[32]; +}; + struct ifla_vf_vlan { __u32 vf; __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */ -- cgit From 7622236ceb167aa3857395f9bdaf871442aa467e Mon Sep 17 00:00:00 2001 From: Vince Weaver Date: Tue, 23 Jul 2019 11:06:01 -0400 Subject: perf header: Fix divide by zero error if f_header.attr_size==0 So I have been having lots of trouble with hand-crafted perf.data files causing segfaults and the like, so I have started fuzzing the perf tool. First issue found: If f_header.attr_size is 0 in the perf.data file, then perf will crash with a divide-by-zero error. Committer note: Added a pr_err() to tell the user why the command failed. Signed-off-by: Vince Weaver Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907231100440.14532@macbook-air Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/header.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 20111f8da5cb..47877f0f6667 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -3559,6 +3559,13 @@ int perf_session__read_header(struct perf_session *session) data->file.path); } + if (f_header.attr_size == 0) { + pr_err("ERROR: The %s file's attr size field is 0 which is unexpected.\n" + "Was the 'perf record' command properly terminated?\n", + data->file.path); + return -EINVAL; + } + nr_attrs = f_header.attrs.size / f_header.attr_size; lseek(fd, f_header.attrs.offset, SEEK_SET); -- cgit From 20f9781f491360e7459c589705a2e4b1f136bee9 Mon Sep 17 00:00:00 2001 From: Numfor Mbiziwo-Tiapo Date: Wed, 24 Jul 2019 16:44:58 -0700 Subject: perf header: Fix use of unitialized value warning When building our local version of perf with MSAN (Memory Sanitizer) and running the perf record command, MSAN throws a use of uninitialized value warning in "tools/perf/util/util.c:333:6". This warning stems from the "buf" variable being passed into "write". It originated as the variable "ev" with the type union perf_event* defined in the "perf_event__synthesize_attr" function in "tools/perf/util/header.c". In the "perf_event__synthesize_attr" function they allocate space with a malloc call using ev, then go on to only assign some of the member variables before passing "ev" on as a parameter to the "process" function therefore "ev" contains uninitialized memory. Changing the malloc call to zalloc to initialize all the members of "ev" which gets rid of the warning. To reproduce this warning, build perf by running: make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-fsanitize=memory\ -fsanitize-memory-track-origins" (Additionally, llvm might have to be installed and clang might have to be specified as the compiler - export CC=/usr/bin/clang) then running: tools/perf/perf record -o - ls / | tools/perf/perf --no-pager annotate\ -i - --stdio Please see the cover letter for why false positive warnings may be generated. Signed-off-by: Numfor Mbiziwo-Tiapo Cc: Alexander Shishkin Cc: Ian Rogers Cc: Jiri Olsa Cc: Mark Drayton Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Song Liu Cc: Stephane Eranian Link: http://lkml.kernel.org/r/20190724234500.253358-2-nums@google.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/header.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 47877f0f6667..1903d7ec9797 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -3646,7 +3646,7 @@ int perf_event__synthesize_attr(struct perf_tool *tool, size += sizeof(struct perf_event_header); size += ids * sizeof(u64); - ev = malloc(size); + ev = zalloc(size); if (ev == NULL) return -ENOMEM; -- cgit From 2e9a06dda10aea81a17c623f08534dac6735434a Mon Sep 17 00:00:00 2001 From: Vince Weaver Date: Thu, 25 Jul 2019 11:57:43 -0400 Subject: perf tools: Fix perf.data documentation units for memory size The perf.data-file-format documentation incorrectly says the HEADER_TOTAL_MEM results are in bytes. The results are in kilobytes (perf reads the value from /proc/meminfo) Signed-off-by: Vince Weaver Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907251155500.22624@macbook-air Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Documentation/perf.data-file-format.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/Documentation/perf.data-file-format.txt b/tools/perf/Documentation/perf.data-file-format.txt index 5f54feb19977..d030c87ed9f5 100644 --- a/tools/perf/Documentation/perf.data-file-format.txt +++ b/tools/perf/Documentation/perf.data-file-format.txt @@ -126,7 +126,7 @@ vendor,family,model,stepping. For example: GenuineIntel,6,69,1 HEADER_TOTAL_MEM = 10, -An uint64_t with the total memory in bytes. +An uint64_t with the total memory in kilobytes. HEADER_CMDLINE = 11, -- cgit From 705d0abbcc7adf04743d04ea8754acbcdf21c326 Mon Sep 17 00:00:00 2001 From: Santosh Sivaraj Date: Mon, 29 Jul 2019 11:25:36 +0530 Subject: powerpc/kvm: Fall through switch case explicitly Implicit fallthrough warning was enabled globally which broke the build. Make it explicit with a `fall through` comment. Signed-off-by: Santosh Sivaraj Reviewed-by: Stephen Rothwell Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190729055536.25591-1-santosh@fossix.org --- arch/powerpc/kvm/book3s_32_mmu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/kvm/book3s_32_mmu.c b/arch/powerpc/kvm/book3s_32_mmu.c index 653936177857..18f244aad7aa 100644 --- a/arch/powerpc/kvm/book3s_32_mmu.c +++ b/arch/powerpc/kvm/book3s_32_mmu.c @@ -239,6 +239,7 @@ static int kvmppc_mmu_book3s_32_xlate_pte(struct kvm_vcpu *vcpu, gva_t eaddr, case 2: case 6: pte->may_write = true; + /* fall through */ case 3: case 5: case 7: -- cgit From c270cac40828eca4fb8d7c27cab1d0ac7765ff3d Mon Sep 17 00:00:00 2001 From: Lionel Landwerlin Date: Sat, 29 Jun 2019 14:13:50 +0100 Subject: drm/i915: fix whitelist selftests with readonly registers When a register is readonly there is not much we can tell about its value (apart from its default value?). This can be covered by tests exercising the value of the register from userspace. For PS_INVOCATION_COUNT we've got the following piglit tests : KHR-GL45.pipeline_statistics_query_tests_ARB.functional_fragment_shader_invocations Vulkan CTS tests : dEQP-VK.query_pool.statistics_query.fragment_shader_invocations.* v2: Use a local to shrink under 80cols. Signed-off-by: Lionel Landwerlin Fixes: 86554f48e511 ("drm/i915/selftests: Verify whitelist of context registers") Tested-by: Anuj Phogat Signed-off-by: Chris Wilson Reviewed-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20190629131350.31185-1-chris@chris-wilson.co.uk (cherry picked from commit 361b69051326ed0e07553315227678d00d651a9e) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/selftest_workarounds.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gt/selftest_workarounds.c b/drivers/gpu/drm/i915/gt/selftest_workarounds.c index 9eaf030affd0..44becd9538be 100644 --- a/drivers/gpu/drm/i915/gt/selftest_workarounds.c +++ b/drivers/gpu/drm/i915/gt/selftest_workarounds.c @@ -925,7 +925,12 @@ check_whitelisted_registers(struct intel_engine_cs *engine, err = 0; for (i = 0; i < engine->whitelist.count; i++) { - if (!fn(engine, a[i], b[i], engine->whitelist.list[i].reg)) + const struct i915_wa *wa = &engine->whitelist.list[i]; + + if (i915_mmio_reg_offset(wa->reg) & RING_FORCE_TO_NONPRIV_RD) + continue; + + if (!fn(engine, a[i], b[i], wa->reg)) err = -EINVAL; } -- cgit From 6ce5bfe936ac31d5c52c4b1328d0bfda5f97e7ca Mon Sep 17 00:00:00 2001 From: Lionel Landwerlin Date: Fri, 28 Jun 2019 15:07:19 +0300 Subject: drm/i915: whitelist PS_(DEPTH|INVOCATION)_COUNT CFL:C0+ changed the status of those registers which are now blacklisted by default. This is breaking a number of CTS tests on GL & Vulkan : KHR-GL45.pipeline_statistics_query_tests_ARB.functional_fragment_shader_invocations (GL) dEQP-VK.query_pool.statistics_query.fragment_shader_invocations.* (Vulkan) v2: Only use one whitelist entry (Lionel) Bspec: 14091 Signed-off-by: Lionel Landwerlin Cc: stable@vger.kernel.org # 6883eab27481: drm/i915: Support flags in whitlist WAs Cc: stable@vger.kernel.org Acked-by: Chris Wilson Signed-off-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20190628120720.21682-3-lionel.g.landwerlin@intel.com (cherry picked from commit 2c903da50f5a9522b134e488bd0f92646c46f3c0) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_workarounds.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gt/intel_workarounds.c b/drivers/gpu/drm/i915/gt/intel_workarounds.c index 50c0060509a6..b26c3549429e 100644 --- a/drivers/gpu/drm/i915/gt/intel_workarounds.c +++ b/drivers/gpu/drm/i915/gt/intel_workarounds.c @@ -1098,10 +1098,25 @@ static void glk_whitelist_build(struct intel_engine_cs *engine) static void cfl_whitelist_build(struct intel_engine_cs *engine) { + struct i915_wa_list *w = &engine->whitelist; + if (engine->class != RENDER_CLASS) return; - gen9_whitelist_build(&engine->whitelist); + gen9_whitelist_build(w); + + /* + * WaAllowPMDepthAndInvocationCountAccessFromUMD:cfl,whl,cml,aml + * + * This covers 4 register which are next to one another : + * - PS_INVOCATION_COUNT + * - PS_INVOCATION_COUNT_UDW + * - PS_DEPTH_COUNT + * - PS_DEPTH_COUNT_UDW + */ + whitelist_reg_ext(w, PS_INVOCATION_COUNT, + RING_FORCE_TO_NONPRIV_RD | + RING_FORCE_TO_NONPRIV_RANGE_4); } static void cnl_whitelist_build(struct intel_engine_cs *engine) -- cgit From cf8f9aa1eda7d916bd23f6b8c226404deb11690c Mon Sep 17 00:00:00 2001 From: Lionel Landwerlin Date: Fri, 28 Jun 2019 15:07:20 +0300 Subject: drm/i915/icl: whitelist PS_(DEPTH|INVOCATION)_COUNT The same tests failing on CFL+ platforms are also failing on ICL. Documentation doesn't list the WaAllowPMDepthAndInvocationCountAccessFromUMD workaround for ICL but applying it fixes the same tests as CFL. v2: Use only one whitelist entry (Lionel) Signed-off-by: Lionel Landwerlin Tested-by: Anuj Phogat Cc: stable@vger.kernel.org # 6883eab27481: drm/i915: Support flags in whitlist WAs Cc: stable@vger.kernel.org Acked-by: Chris Wilson Signed-off-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20190628120720.21682-4-lionel.g.landwerlin@intel.com (cherry picked from commit 3fe0107e45ab396342497e06b8924cdd485cde3b) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_workarounds.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/gpu/drm/i915/gt/intel_workarounds.c b/drivers/gpu/drm/i915/gt/intel_workarounds.c index b26c3549429e..98dfb086320f 100644 --- a/drivers/gpu/drm/i915/gt/intel_workarounds.c +++ b/drivers/gpu/drm/i915/gt/intel_workarounds.c @@ -1144,6 +1144,19 @@ static void icl_whitelist_build(struct intel_engine_cs *engine) /* WaEnableStateCacheRedirectToCS:icl */ whitelist_reg(w, GEN9_SLICE_COMMON_ECO_CHICKEN1); + + /* + * WaAllowPMDepthAndInvocationCountAccessFromUMD:icl + * + * This covers 4 register which are next to one another : + * - PS_INVOCATION_COUNT + * - PS_INVOCATION_COUNT_UDW + * - PS_DEPTH_COUNT + * - PS_DEPTH_COUNT_UDW + */ + whitelist_reg_ext(w, PS_INVOCATION_COUNT, + RING_FORCE_TO_NONPRIV_RD | + RING_FORCE_TO_NONPRIV_RANGE_4); break; case VIDEO_DECODE_CLASS: -- cgit From fdcc789a4a0bb2ef01857095752be12b03cbb341 Mon Sep 17 00:00:00 2001 From: Mika Kuoppala Date: Mon, 1 Jul 2019 13:44:42 +0300 Subject: drm/i915: Fix memleak in runtime wakeref tracking If we untrack wakerefs, the actual count may reach zero. However the krealloced owners array is still there and needs to be taken care of. Free the owners unconditionally to fix the leak. Fixes: bd780f37a361 ("drm/i915: Track all held rpm wakerefs") Reported-by: Juha-Pekka Heikkila Cc: Juha-Pekka Heikkila Cc: Chris Wilson Signed-off-by: Mika Kuoppala Reviewed-by: Chris Wilson Signed-off-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20190701104442.9319-1-mika.kuoppala@linux.intel.com (cherry picked from commit c5f846eed2a1856b78e988eeef08215c70598ecd) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_runtime_pm.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c index 502c54428570..8d1aebc3e857 100644 --- a/drivers/gpu/drm/i915/intel_runtime_pm.c +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c @@ -221,13 +221,11 @@ __untrack_all_wakerefs(struct intel_runtime_pm_debug *debug, static void dump_and_free_wakeref_tracking(struct intel_runtime_pm_debug *debug) { - struct drm_printer p; + if (debug->count) { + struct drm_printer p = drm_debug_printer("i915"); - if (!debug->count) - return; - - p = drm_debug_printer("i915"); - __print_intel_runtime_pm_wakeref(&p, debug); + __print_intel_runtime_pm_wakeref(&p, debug); + } kfree(debug->owners); } -- cgit From d1b739f326b960631827f0ea350002c5bc8df443 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Thu, 6 Jun 2019 15:42:10 +0300 Subject: drm/i915: Deal with machines that expose less than three QGV points MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When SAGV is forced to disabled/min/med/max in the BIOS pcode will only hand us a single QGV point instead of the normal three. Fix the code to deal with that instead declaring the bandwidth limit to be 0 MB/s (and thus preventing any planes from being enabled). Also shrink the max_bw sturct a bit while at it, and change the deratedbw type to unsigned since the code returns the bw as an unsigned int. Since we now keep track of how many qgv points we got from pcode we can drop the earlier check added for the "pcode doesn't support the memory subsystem query" case. Cc: felix.j.degrood@intel.com Cc: Mark Janes Cc: Matt Roper Cc: Clint Taylor Fixes: c457d9cf256e ("drm/i915: Make sure we have enough memory bandwidth on ICL") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110838 Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20190606124210.3482-1-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper (cherry picked from commit 56e9371bc3f3e7d6c1a197a45d550b2ce6af25f6) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_bw.c | 15 ++++++++++----- drivers/gpu/drm/i915/i915_drv.h | 5 +++-- 2 files changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c index 753ac3165061..7b908e10d32e 100644 --- a/drivers/gpu/drm/i915/display/intel_bw.c +++ b/drivers/gpu/drm/i915/display/intel_bw.c @@ -178,6 +178,8 @@ static int icl_get_bw_info(struct drm_i915_private *dev_priv) clpchgroup = (sa->deburst * deinterleave / num_channels) << i; bi->num_planes = (ipqdepth - clpchgroup) / clpchgroup + 1; + bi->num_qgv_points = qi.num_points; + for (j = 0; j < qi.num_points; j++) { const struct intel_qgv_point *sp = &qi.points[j]; int ct, bw; @@ -195,7 +197,7 @@ static int icl_get_bw_info(struct drm_i915_private *dev_priv) bi->deratedbw[j] = min(maxdebw, bw * 9 / 10); /* 90% */ - DRM_DEBUG_KMS("BW%d / QGV %d: num_planes=%d deratedbw=%d\n", + DRM_DEBUG_KMS("BW%d / QGV %d: num_planes=%d deratedbw=%u\n", i, j, bi->num_planes, bi->deratedbw[j]); } @@ -211,14 +213,17 @@ static unsigned int icl_max_bw(struct drm_i915_private *dev_priv, { int i; - /* Did we initialize the bw limits successfully? */ - if (dev_priv->max_bw[0].num_planes == 0) - return UINT_MAX; - for (i = 0; i < ARRAY_SIZE(dev_priv->max_bw); i++) { const struct intel_bw_info *bi = &dev_priv->max_bw[i]; + /* + * Pcode will not expose all QGV points when + * SAGV is forced to off/min/med/max. + */ + if (qgv_point >= bi->num_qgv_points) + return UINT_MAX; + if (num_planes >= bi->num_planes) return bi->deratedbw[qgv_point]; } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index bc909ec5d9c3..fe7a6ec2c199 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1674,8 +1674,9 @@ struct drm_i915_private { } dram_info; struct intel_bw_info { - int num_planes; - int deratedbw[3]; + unsigned int deratedbw[3]; /* for each QGV point */ + u8 num_qgv_points; + u8 num_planes; } max_bw[6]; struct drm_private_obj bw_obj; -- cgit From f691eaa4801484fffc8a2bcb24caa27fb2edcce3 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 3 Jul 2019 18:19:12 +0100 Subject: drm/i915/gtt: Defer the free for alloc error paths If we hit an error while allocating the page tables, we have to unwind the incomplete updates, and wish to free the unused pd. However, we are not allowed to be hoding the spinlock at that point, and so must use the later free to defer it until after we drop the lock. <3> [414.363795] BUG: sleeping function called from invalid context at drivers/gpu/drm/i915/i915_gem_gtt.c:472 <3> [414.364167] in_atomic(): 1, irqs_disabled(): 0, pid: 3905, name: i915_selftest <4> [414.364406] 3 locks held by i915_selftest/3905: <4> [414.364408] #0: 0000000034fe8aa8 (&dev->mutex){....}, at: device_driver_attach+0x18/0x50 <4> [414.364415] #1: 000000006bd8a560 (&dev->struct_mutex){+.+.}, at: igt_ctx_exec+0xb7/0x410 [i915] <4> [414.364476] #2: 000000003dfdc766 (&(&pd->lock)->rlock){+.+.}, at: gen8_ppgtt_alloc_pdp+0x448/0x540 [i915] <3> [414.364529] Preemption disabled at: <4> [414.364530] [<0000000000000000>] 0x0 <4> [414.364696] CPU: 0 PID: 3905 Comm: i915_selftest Tainted: G U 5.2.0-rc7-CI-CI_DRM_6403+ #1 <4> [414.364698] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014 <4> [414.364699] Call Trace: <4> [414.364704] dump_stack+0x67/0x9b <4> [414.364708] ___might_sleep+0x167/0x250 <4> [414.364777] vm_free_page+0x24/0xc0 [i915] <4> [414.364852] free_pd+0xf/0x20 [i915] <4> [414.364897] gen8_ppgtt_alloc_pdp+0x489/0x540 [i915] <4> [414.364946] gen8_ppgtt_alloc_4lvl+0x8e/0x2e0 [i915] <4> [414.364992] ppgtt_bind_vma+0x2e/0x60 [i915] <4> [414.365039] i915_vma_bind+0xe8/0x2c0 [i915] <4> [414.365088] __i915_vma_do_pin+0xa1/0xd20 [i915] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111050 Fixes: 1d1b5490b91c ("drm/i915/gtt: Replace struct_mutex serialisation for allocation") Signed-off-by: Chris Wilson Cc: Matthew Auld Cc: Mika Kuoppala Reviewed-by: Mika Kuoppala Link: https://patchwork.freedesktop.org/patch/msgid/20190703171913.16585-3-chris@chris-wilson.co.uk (cherry picked from commit 068610895ebd4bd86f496f01eb7b97e56d7269b2) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_gtt.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 8ab820145ea6..50fe72d40d8b 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -1446,7 +1446,8 @@ unwind_pd: gen8_ppgtt_set_pdpe(pdp, vm->scratch_pd, pdpe); GEM_BUG_ON(!atomic_read(&pdp->used)); atomic_dec(&pdp->used); - free_pd(vm, pd); + GEM_BUG_ON(alloc); + alloc = pd; /* defer the free to after the lock */ } spin_unlock(&pdp->lock); unwind: @@ -1515,7 +1516,8 @@ unwind_pdp: spin_lock(&pml4->lock); if (atomic_dec_and_test(&pdp->used)) { gen8_ppgtt_set_pml4e(pml4, vm->scratch_pdp, pml4e); - free_pd(vm, pdp); + GEM_BUG_ON(alloc); + alloc = pdp; /* defer the free until after the lock */ } spin_unlock(&pml4->lock); unwind: -- cgit From 5f4c82c89ff0e11b31561aa7e547acb10bf650c2 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 4 Jul 2019 21:16:56 +0100 Subject: drm/i915/gtt: Mark the freed page table entries with scratch On unwinding the allocation error path and having freed the page table entry, it is imperative that we mark it as scratch. <4> [416.075569] general protection fault: 0000 [#1] PREEMPT SMP PTI <4> [416.075801] CPU: 0 PID: 2385 Comm: kworker/u2:11 Tainted: G U 5.2.0-rc7-CI-Patchwork_13534+ #1 <4> [416.076162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014 <4> [416.076522] Workqueue: i915 __i915_vm_release [i915] <4> [416.076754] RIP: 0010:gen8_ppgtt_cleanup_3lvl+0x58/0xb0 [i915] <4> [416.077023] Code: 81 e2 04 fe ff ff 81 c2 ff 01 00 00 4c 8d 74 d6 58 4d 8b 65 00 4d 3b a7 28 02 00 00 74 40 49 8d 5c 24 50 49 81 c4 50 10 00 00 <48> 8b 2b 49 3b af 20 02 00 00 74 13 4c 89 ff 48 89 ee e8 01 fb ff <4> [416.077445] RSP: 0018:ffffc9000046bd98 EFLAGS: 00010206 <4> [416.077625] RAX: 0001000000000000 RBX: 6b6b6b6b6b6b6bbb RCX: 8b4b56d500000000 <4> [416.077838] RDX: 00000000000001ff RSI: ffff88805a578008 RDI: ffff88805bd0efc8 <4> [416.078167] RBP: ffff88805bd0efc8 R08: 0000000004e42b93 R09: 0000000000000001 <4> [416.078381] R10: 0000000000000000 R11: ffff888077a1b0b8 R12: 6b6b6b6b6b6b7bbb <4> [416.078594] R13: ffff88805a578058 R14: ffff88805a579058 R15: ffff88805bd0efc8 <4> [416.078815] FS: 0000000000000000(0000) GS:ffff88807da00000(0000) knlGS:0000000000000000 <4> [416.079395] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [416.079851] CR2: 000056160fec2b14 CR3: 0000000071bbc003 CR4: 00000000003606f0 <4> [416.080388] Call Trace: <4> [416.080828] gen8_ppgtt_cleanup+0x64/0x100 [i915] <4> [416.081399] __i915_vm_release+0xfc/0x1d0 [i915] Fixes: 1d1b5490b91c ("drm/i915/gtt: Replace struct_mutex serialisation for allocation") Signed-off-by: Chris Wilson Cc: Matthew Auld Cc: Mika Kuoppala Reviewed-by: Matthew Auld Link: https://patchwork.freedesktop.org/patch/msgid/20190704201656.15775-1-chris@chris-wilson.co.uk (cherry picked from commit e7539b79f703a6b533385088fc15cb5c9ab3f56f) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_gtt.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 50fe72d40d8b..7015a97b1097 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -1444,6 +1444,7 @@ unwind_pd: spin_lock(&pdp->lock); if (atomic_dec_and_test(&pd->used)) { gen8_ppgtt_set_pdpe(pdp, vm->scratch_pd, pdpe); + pdp->entry[pdpe] = vm->scratch_pd; GEM_BUG_ON(!atomic_read(&pdp->used)); atomic_dec(&pdp->used); GEM_BUG_ON(alloc); @@ -1516,6 +1517,7 @@ unwind_pdp: spin_lock(&pml4->lock); if (atomic_dec_and_test(&pdp->used)) { gen8_ppgtt_set_pml4e(pml4, vm->scratch_pdp, pml4e); + pml4->entry[pml4e] = vm->scratch_pdp; GEM_BUG_ON(alloc); alloc = pdp; /* defer the free until after the lock */ } -- cgit From aa56a292ce623734ddd30f52d73f527d1f3529b5 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 8 Jul 2019 15:03:27 +0100 Subject: drm/i915/userptr: Acquire the page lock around set_page_dirty() set_page_dirty says: For pages with a mapping this should be done under the page lock for the benefit of asynchronous memory errors who prefer a consistent dirty state. This rule can be broken in some special cases, but should be better not to. Under those rules, it is only safe for us to use the plain set_page_dirty calls for shmemfs/anonymous memory. Userptr may be used with real mappings and so needs to use the locked version (set_page_dirty_lock). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317 Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl") References: 6dcc693bc57f ("ext4: warn when page is dirtied without buffers") Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: stable@vger.kernel.org Reviewed-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20190708140327.26825-1-chris@chris-wilson.co.uk (cherry picked from commit cb6d7c7dc7ff8cace666ddec66334117a6068ce2) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gem/i915_gem_userptr.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gem/i915_gem_userptr.c b/drivers/gpu/drm/i915/gem/i915_gem_userptr.c index 528b61678334..2caa594322bc 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_userptr.c +++ b/drivers/gpu/drm/i915/gem/i915_gem_userptr.c @@ -664,7 +664,15 @@ i915_gem_userptr_put_pages(struct drm_i915_gem_object *obj, for_each_sgt_page(page, sgt_iter, pages) { if (obj->mm.dirty) - set_page_dirty(page); + /* + * As this may not be anonymous memory (e.g. shmem) + * but exist on a real mapping, we have to lock + * the page in order to dirty it -- holding + * the page reference is not sufficient to + * prevent the inode from being truncated. + * Play safe and take the lock. + */ + set_page_dirty_lock(page); mark_page_accessed(page); put_page(page); -- cgit From 06c12ae3b401238477e65e8c4e04e065699a6115 Mon Sep 17 00:00:00 2001 From: Lionel Landwerlin Date: Tue, 9 Jul 2019 15:33:39 +0300 Subject: drm/i915/perf: ensure we keep a reference on the driver The i915 perf stream has its own file descriptor and is tied to reference of the driver. We haven't taken care of keep the driver alive. Signed-off-by: Lionel Landwerlin Suggested-by: Chris Wilson Fixes: eec688e1420da5 ("drm/i915: Add i915 perf infrastructure") Reviewed-by: Chris Wilson Signed-off-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20190709123351.5645-2-lionel.g.landwerlin@intel.com (cherry picked from commit a5af1df716c123a09341351008fc497bea137b77) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_perf.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c index 1ae06a1b6749..629511ea9a18 100644 --- a/drivers/gpu/drm/i915/i915_perf.c +++ b/drivers/gpu/drm/i915/i915_perf.c @@ -2515,6 +2515,9 @@ static int i915_perf_release(struct inode *inode, struct file *file) i915_perf_destroy_locked(stream); mutex_unlock(&dev_priv->perf.lock); + /* Release the reference the perf stream kept on the driver. */ + drm_dev_put(&dev_priv->drm); + return 0; } @@ -2650,6 +2653,11 @@ i915_perf_open_ioctl_locked(struct drm_i915_private *dev_priv, if (!(param->flags & I915_PERF_FLAG_DISABLED)) i915_perf_enable_locked(stream); + /* Take a reference on the driver that will be kept with stream_fd + * until its release. + */ + drm_dev_get(&dev_priv->drm); + return stream_fd; err_open: -- cgit From 8f48de49795ca52f70c96558ccc6a0c174504779 Mon Sep 17 00:00:00 2001 From: Lionel Landwerlin Date: Wed, 10 Jul 2019 11:55:24 +0100 Subject: drm/i915/perf: add missing delay for OA muxes configuration This was dropped from the original patch series, we weren't sure whether it was needed at the time. More recent tests show it's definitely needed to have acurate performance data. Signed-off-by: Lionel Landwerlin Fixes: 19f81df2859eb1 ("drm/i915/perf: Add OA unit support for Gen 8+") Acked-by: Chris Wilson [ickle: combine duplicate code and comments] Signed-off-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20190710105524.23017-1-chris@chris-wilson.co.uk (cherry picked from commit 14bfcd3e0daeb0f757a02aac85fd03e0933ab37e) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_perf.c | 49 +++++++++++++++++++++++----------------- 1 file changed, 28 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c index 629511ea9a18..5140017f9a39 100644 --- a/drivers/gpu/drm/i915/i915_perf.c +++ b/drivers/gpu/drm/i915/i915_perf.c @@ -1567,28 +1567,10 @@ static void config_oa_regs(struct drm_i915_private *dev_priv, } } -static int hsw_enable_metric_set(struct i915_perf_stream *stream) +static void delay_after_mux(void) { - struct drm_i915_private *dev_priv = stream->dev_priv; - const struct i915_oa_config *oa_config = stream->oa_config; - - /* PRM: - * - * OA unit is using “crclk” for its functionality. When trunk - * level clock gating takes place, OA clock would be gated, - * unable to count the events from non-render clock domain. - * Render clock gating must be disabled when OA is enabled to - * count the events from non-render domain. Unit level clock - * gating for RCS should also be disabled. - */ - I915_WRITE(GEN7_MISCCPCTL, (I915_READ(GEN7_MISCCPCTL) & - ~GEN7_DOP_CLOCK_GATE_ENABLE)); - I915_WRITE(GEN6_UCGCTL1, (I915_READ(GEN6_UCGCTL1) | - GEN6_CSUNIT_CLOCK_GATE_DISABLE)); - - config_oa_regs(dev_priv, oa_config->mux_regs, oa_config->mux_regs_len); - - /* It apparently takes a fairly long time for a new MUX + /* + * It apparently takes a fairly long time for a new MUX * configuration to be be applied after these register writes. * This delay duration was derived empirically based on the * render_basic config but hopefully it covers the maximum @@ -1610,6 +1592,30 @@ static int hsw_enable_metric_set(struct i915_perf_stream *stream) * a delay at this location would mitigate any invalid reports. */ usleep_range(15000, 20000); +} + +static int hsw_enable_metric_set(struct i915_perf_stream *stream) +{ + struct drm_i915_private *dev_priv = stream->dev_priv; + const struct i915_oa_config *oa_config = stream->oa_config; + + /* + * PRM: + * + * OA unit is using “crclk” for its functionality. When trunk + * level clock gating takes place, OA clock would be gated, + * unable to count the events from non-render clock domain. + * Render clock gating must be disabled when OA is enabled to + * count the events from non-render domain. Unit level clock + * gating for RCS should also be disabled. + */ + I915_WRITE(GEN7_MISCCPCTL, (I915_READ(GEN7_MISCCPCTL) & + ~GEN7_DOP_CLOCK_GATE_ENABLE)); + I915_WRITE(GEN6_UCGCTL1, (I915_READ(GEN6_UCGCTL1) | + GEN6_CSUNIT_CLOCK_GATE_DISABLE)); + + config_oa_regs(dev_priv, oa_config->mux_regs, oa_config->mux_regs_len); + delay_after_mux(); config_oa_regs(dev_priv, oa_config->b_counter_regs, oa_config->b_counter_regs_len); @@ -1835,6 +1841,7 @@ static int gen8_enable_metric_set(struct i915_perf_stream *stream) return ret; config_oa_regs(dev_priv, oa_config->mux_regs, oa_config->mux_regs_len); + delay_after_mux(); config_oa_regs(dev_priv, oa_config->b_counter_regs, oa_config->b_counter_regs_len); -- cgit From 982b1d002f16c2695871e005c4132060c836db56 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 15 Jul 2019 09:09:28 +0100 Subject: drm/i915: Lock the engine while dumping the active request We cannot let the request be retired and freed while we are trying to dump it during error capture. It is not sufficient just to grab a reference to the request, as during retirement we may free the ring which we are also dumping. So take the engine lock to prevent retiring and freeing of the request. Reported-by: Alex Shumsky Fixes: 83c317832eb1 ("drm/i915: Dump the ringbuffer of the active request for debugging") Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: Joonas Lahtinen Cc: Alex Shumsky Reviewed-by: Tvrtko Ursulin Link: https://patchwork.freedesktop.org/patch/msgid/20190715080946.15593-6-chris@chris-wilson.co.uk (cherry picked from commit cfe7288c276e359eebf057699fe86c2f8af14224) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 11 ++++------- drivers/gpu/drm/i915/i915_gpu_error.c | 6 ++++-- 2 files changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_engine_cs.c b/drivers/gpu/drm/i915/gt/intel_engine_cs.c index 7fd33e81c2d9..aa5a1f11a91b 100644 --- a/drivers/gpu/drm/i915/gt/intel_engine_cs.c +++ b/drivers/gpu/drm/i915/gt/intel_engine_cs.c @@ -1471,6 +1471,7 @@ void intel_engine_dump(struct intel_engine_cs *engine, struct i915_gpu_error * const error = &engine->i915->gpu_error; struct i915_request *rq; intel_wakeref_t wakeref; + unsigned long flags; if (header) { va_list ap; @@ -1490,10 +1491,9 @@ void intel_engine_dump(struct intel_engine_cs *engine, i915_reset_engine_count(error, engine), i915_reset_count(error)); - rcu_read_lock(); - drm_printf(m, "\tRequests:\n"); + spin_lock_irqsave(&engine->active.lock, flags); rq = intel_engine_find_active_request(engine); if (rq) { print_request(m, rq, "\t\tactive "); @@ -1513,8 +1513,7 @@ void intel_engine_dump(struct intel_engine_cs *engine, print_request_ring(m, rq); } - - rcu_read_unlock(); + spin_unlock_irqrestore(&engine->active.lock, flags); wakeref = intel_runtime_pm_get_if_in_use(&engine->i915->runtime_pm); if (wakeref) { @@ -1672,7 +1671,6 @@ struct i915_request * intel_engine_find_active_request(struct intel_engine_cs *engine) { struct i915_request *request, *active = NULL; - unsigned long flags; /* * We are called by the error capture, reset and to dump engine @@ -1685,7 +1683,7 @@ intel_engine_find_active_request(struct intel_engine_cs *engine) * At all other times, we must assume the GPU is still running, but * we only care about the snapshot of this moment. */ - spin_lock_irqsave(&engine->active.lock, flags); + lockdep_assert_held(&engine->active.lock); list_for_each_entry(request, &engine->active.requests, sched.link) { if (i915_request_completed(request)) continue; @@ -1700,7 +1698,6 @@ intel_engine_find_active_request(struct intel_engine_cs *engine) active = request; break; } - spin_unlock_irqrestore(&engine->active.lock, flags); return active; } diff --git a/drivers/gpu/drm/i915/i915_gpu_error.c b/drivers/gpu/drm/i915/i915_gpu_error.c index 41a511d5267f..8bc76fcff70d 100644 --- a/drivers/gpu/drm/i915/i915_gpu_error.c +++ b/drivers/gpu/drm/i915/i915_gpu_error.c @@ -1418,6 +1418,7 @@ static void gem_record_rings(struct i915_gpu_state *error) struct intel_engine_cs *engine = i915->engine[i]; struct drm_i915_error_engine *ee = &error->engine[i]; struct i915_request *request; + unsigned long flags; ee->engine_id = -1; @@ -1429,10 +1430,11 @@ static void gem_record_rings(struct i915_gpu_state *error) error_record_engine_registers(error, engine, ee); error_record_engine_execlists(engine, ee); + spin_lock_irqsave(&engine->active.lock, flags); request = intel_engine_find_active_request(engine); if (request) { struct i915_gem_context *ctx = request->gem_context; - struct intel_ring *ring; + struct intel_ring *ring = request->ring; ee->vm = ctx->vm ?: &ggtt->vm; @@ -1462,7 +1464,6 @@ static void gem_record_rings(struct i915_gpu_state *error) ee->rq_post = request->postfix; ee->rq_tail = request->tail; - ring = request->ring; ee->cpu_ring_head = ring->head; ee->cpu_ring_tail = ring->tail; ee->ringbuffer = @@ -1470,6 +1471,7 @@ static void gem_record_rings(struct i915_gpu_state *error) engine_record_requests(engine, request, ee); } + spin_unlock_irqrestore(&engine->active.lock, flags); ee->hws_page = i915_error_object_create(i915, -- cgit From a8f196a0fa6391a436f63f360a1fb57031fdf26c Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 17 Jul 2019 14:45:36 +0300 Subject: drm/i915: Make sure cdclk is high enough for DP audio on VLV/CHV MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On VLV/CHV there is some kind of linkage between the cdclk frequency and the DP link frequency. The spec says: "For DP audio configuration, cdclk frequency shall be set to meet the following requirements: DP Link Frequency(MHz) | Cdclk frequency(MHz) 270 | 320 or higher 162 | 200 or higher" I suspect that would more accurately be expressed as "cdclk >= DP link clock", and in any case we can express it like that in the code because of the limited set of cdclk (200, 266, 320, 400 MHz) and link frequencies (162 and 270 MHz) we support. Without this we can end up in a situation where the cdclk is too low and enabling DP audio will kill the pipe. Happens eg. with 2560x1440 modes where the 266MHz cdclk is sufficient to pump the pixels (241.5 MHz dotclock) but is too low for the DP audio due to the link frequency being 270 MHz. v2: Spell out the cdclk and link frequencies we actually support Cc: stable@vger.kernel.org Tested-by: Stefan Gottwald Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111149 Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20190717114536.22937-1-ville.syrjala@linux.intel.com Acked-by: Chris Wilson (cherry picked from commit bffb31f73b29a60ef693842d8744950c2819851d) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_cdclk.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c index 8993ab283562..0d19bbd08122 100644 --- a/drivers/gpu/drm/i915/display/intel_cdclk.c +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c @@ -2239,6 +2239,17 @@ int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state) if (crtc_state->has_audio && INTEL_GEN(dev_priv) >= 9) min_cdclk = max(2 * 96000, min_cdclk); + /* + * "For DP audio configuration, cdclk frequency shall be set to + * meet the following requirements: + * DP Link Frequency(MHz) | Cdclk frequency(MHz) + * 270 | 320 or higher + * 162 | 200 or higher" + */ + if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) && + intel_crtc_has_dp_encoder(crtc_state) && crtc_state->has_audio) + min_cdclk = max(crtc_state->port_clock, min_cdclk); + /* * On Valleyview some DSI panels lose (v|h)sync when the clock is lower * than 320000KHz. -- cgit From 6d61f716a01ec0e134de38ae97e71d6fec5a6ff6 Mon Sep 17 00:00:00 2001 From: Dhinakaran Pandiyan Date: Wed, 17 Jul 2019 15:34:51 -0700 Subject: drm/i915/vbt: Fix VBT parsing for the PSR section MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A single 32-bit PSR2 training pattern field follows the sixteen element array of PSR table entries in the VBT spec. But, we incorrectly define this PSR2 field for each of the PSR table entries. As a result, the PSR1 training pattern duration for any panel_type != 0 will be parsed incorrectly. Secondly, PSR2 training pattern durations for VBTs with bdb version >= 226 will also be wrong. Cc: Rodrigo Vivi Cc: José Roberto de Souza Cc: stable@vger.kernel.org Cc: stable@vger.kernel.org #v5.2 Fixes: 88a0d9606aff ("drm/i915/vbt: Parse and use the new field with PSR2 TP2/3 wakeup time") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111088 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204183 Signed-off-by: Dhinakaran Pandiyan Reviewed-by: Ville Syrjälä Reviewed-by: José Roberto de Souza Acked-by: Rodrigo Vivi Tested-by: François Guerraz Signed-off-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20190717223451.2595-1-dhinakaran.pandiyan@intel.com (cherry picked from commit b5ea9c9337007d6e700280c8a60b4e10d070fb53) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_bios.c | 2 +- drivers/gpu/drm/i915/display/intel_vbt_defs.h | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c index c4710889cb32..3ef4e9f573cf 100644 --- a/drivers/gpu/drm/i915/display/intel_bios.c +++ b/drivers/gpu/drm/i915/display/intel_bios.c @@ -765,7 +765,7 @@ parse_psr(struct drm_i915_private *dev_priv, const struct bdb_header *bdb) } if (bdb->version >= 226) { - u32 wakeup_time = psr_table->psr2_tp2_tp3_wakeup_time; + u32 wakeup_time = psr->psr2_tp2_tp3_wakeup_time; wakeup_time = (wakeup_time >> (2 * panel_type)) & 0x3; switch (wakeup_time) { diff --git a/drivers/gpu/drm/i915/display/intel_vbt_defs.h b/drivers/gpu/drm/i915/display/intel_vbt_defs.h index 2f4894e9a03d..5ddbe71ab423 100644 --- a/drivers/gpu/drm/i915/display/intel_vbt_defs.h +++ b/drivers/gpu/drm/i915/display/intel_vbt_defs.h @@ -478,13 +478,13 @@ struct psr_table { /* TP wake up time in multiple of 100 */ u16 tp1_wakeup_time; u16 tp2_tp3_wakeup_time; - - /* PSR2 TP2/TP3 wakeup time for 16 panels */ - u32 psr2_tp2_tp3_wakeup_time; } __packed; struct bdb_psr { struct psr_table psr_table[16]; + + /* PSR2 TP2/TP3 wakeup time for 16 panels */ + u32 psr2_tp2_tp3_wakeup_time; } __packed; /* -- cgit From 0bbfdce345c8cf01a3a985fa99fefd2146dcc748 Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Wed, 17 Jul 2019 19:06:19 +0100 Subject: drm/i915: Fix GEN8_MCR_SELECTOR programming fls returns bit positions starting from one for the lsb and the MCR register expects zero based (sub)slice addressing. Incorrent MCR programming can have the effect of directing MMIO reads of registers in the 0xb100-0xb3ff range to invalid subslice returning zeroes instead of actual content. Signed-off-by: Tvrtko Ursulin Fixes: 1e40d4aea57b ("drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads") Reviewed-by: Chris Wilson Link: https://patchwork.freedesktop.org/patch/msgid/20190717180624.20354-2-tvrtko.ursulin@linux.intel.com (cherry picked from commit 15160879d47213c32f357bc67b6014d9aaf14ed7) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_engine_cs.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_engine_cs.c b/drivers/gpu/drm/i915/gt/intel_engine_cs.c index aa5a1f11a91b..f25632c9b292 100644 --- a/drivers/gpu/drm/i915/gt/intel_engine_cs.c +++ b/drivers/gpu/drm/i915/gt/intel_engine_cs.c @@ -969,9 +969,14 @@ const char *i915_cache_level_str(struct drm_i915_private *i915, int type) u32 intel_calculate_mcr_s_ss_select(struct drm_i915_private *dev_priv) { const struct sseu_dev_info *sseu = &RUNTIME_INFO(dev_priv)->sseu; + unsigned int slice = fls(sseu->slice_mask) - 1; + unsigned int subslice; u32 mcr_s_ss_select; - u32 slice = fls(sseu->slice_mask); - u32 subslice = fls(sseu->subslice_mask[slice]); + + GEM_BUG_ON(slice >= ARRAY_SIZE(sseu->subslice_mask)); + subslice = fls(sseu->subslice_mask[slice]); + GEM_BUG_ON(!subslice); + subslice--; if (IS_GEN(dev_priv, 10)) mcr_s_ss_select = GEN8_MCR_SLICE(slice) | -- cgit From 89f5752307cf53010d97503ac501b2ca1b089922 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Fri, 28 Jun 2019 17:36:18 +0300 Subject: drm/i915: Fix the TBT AUX power well enabling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the mapping from a TBT AUX power well index to the DP_AUX_CH_CTL register. Fixes: c7375d9542f1 ("drm/i915: Configure AUX_CH_CTL when enabling the AUX power domain") Cc: José Roberto de Souza Cc: Rodrigo Vivi Signed-off-by: Imre Deak Reviewed-by: José Roberto de Souza Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-7-imre.deak@intel.com (cherry picked from commit 29ae36abf08f943b76a2959f5000c44efa335be7) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_display_power.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c index c93ad512014c..2d1939db108f 100644 --- a/drivers/gpu/drm/i915/display/intel_display_power.c +++ b/drivers/gpu/drm/i915/display/intel_display_power.c @@ -438,16 +438,23 @@ icl_combo_phy_aux_power_well_disable(struct drm_i915_private *dev_priv, #define ICL_AUX_PW_TO_CH(pw_idx) \ ((pw_idx) - ICL_PW_CTL_IDX_AUX_A + AUX_CH_A) +#define ICL_TBT_AUX_PW_TO_CH(pw_idx) \ + ((pw_idx) - ICL_PW_CTL_IDX_AUX_TBT1 + AUX_CH_C) + static void icl_tc_phy_aux_power_well_enable(struct drm_i915_private *dev_priv, struct i915_power_well *power_well) { - enum aux_ch aux_ch = ICL_AUX_PW_TO_CH(power_well->desc->hsw.idx); + int pw_idx = power_well->desc->hsw.idx; + bool is_tbt = power_well->desc->hsw.is_tc_tbt; + enum aux_ch aux_ch; u32 val; + aux_ch = is_tbt ? ICL_TBT_AUX_PW_TO_CH(pw_idx) : + ICL_AUX_PW_TO_CH(pw_idx); val = I915_READ(DP_AUX_CH_CTL(aux_ch)); val &= ~DP_AUX_CH_CTL_TBT_IO; - if (power_well->desc->hsw.is_tc_tbt) + if (is_tbt) val |= DP_AUX_CH_CTL_TBT_IO; I915_WRITE(DP_AUX_CH_CTL(aux_ch), val); -- cgit From 91826ba13855f73e252fef68369b3b0e1ed25253 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 29 Jul 2019 00:51:38 +0900 Subject: netfilter: add include guard to xt_connlabel.h Add a header include guard just in case. Signed-off-by: Masahiro Yamada Acked-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/uapi/linux/netfilter/xt_connlabel.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/uapi/linux/netfilter/xt_connlabel.h b/include/uapi/linux/netfilter/xt_connlabel.h index 2312f0ec07b2..323f0dfc2a4e 100644 --- a/include/uapi/linux/netfilter/xt_connlabel.h +++ b/include/uapi/linux/netfilter/xt_connlabel.h @@ -1,4 +1,8 @@ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ + +#ifndef _UAPI_XT_CONNLABEL_H +#define _UAPI_XT_CONNLABEL_H + #include #define XT_CONNLABEL_MAXBIT 127 @@ -11,3 +15,5 @@ struct xt_connlabel_mtinfo { __u16 bit; __u16 options; }; + +#endif /* _UAPI_XT_CONNLABEL_H */ -- cgit From 8aa259b10a6a759c50137bbbf225df0c17ca5d27 Mon Sep 17 00:00:00 2001 From: Andrii Nakryiko Date: Thu, 18 Jul 2019 10:30:21 -0700 Subject: libbpf: fix missing __WORDSIZE definition hashmap.h depends on __WORDSIZE being defined. It is defined by glibc/musl in different headers. It's an explicit goal for musl to be "non-detectable" at compilation time, so instead include glibc header if glibc is explicitly detected and fall back to musl header otherwise. Reported-by: Arnaldo Carvalho de Melo Signed-off-by: Andrii Nakryiko Tested-by: Arnaldo Carvalho de Melo Cc: Alexei Starovoitov Cc: Andrii Nakryiko Cc: Daniel Borkmann Fixes: e3b924224028 ("libbpf: add resizable non-thread safe internal hashmap") Link: https://lkml.kernel.org/r/20190718173021.2418606-1-andriin@fb.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/lib/bpf/hashmap.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/tools/lib/bpf/hashmap.h b/tools/lib/bpf/hashmap.h index 03748a742146..bae8879cdf58 100644 --- a/tools/lib/bpf/hashmap.h +++ b/tools/lib/bpf/hashmap.h @@ -10,6 +10,11 @@ #include #include +#ifdef __GLIBC__ +#include +#else +#include +#endif #include "libbpf_internal.h" static inline size_t hash_bits(size_t h, int bits) -- cgit From 05aaa5c97dce4c10a9e7eae2f1569a684e0c5ced Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 26 Jul 2019 15:47:58 -0700 Subject: mac80211: don't WARN on short WMM parameters from AP In a very similar spirit to commit c470bdc1aaf3 ("mac80211: don't WARN on bad WMM parameters from buggy APs"), an AP may not transmit a fully-formed WMM IE. For example, it may miss or repeat an Access Category. The above loop won't catch that and will instead leave one of the four ACs zeroed out. This triggers the following warning in drv_conf_tx() wlan0: invalid CW_min/CW_max: 0/0 and it may leave one of the hardware queues unconfigured. If we detect such a case, let's just print a warning and fall back to the defaults. Tested with a hacked version of hostapd, intentionally corrupting the IEs in hostapd_eid_wmm(). Cc: stable@vger.kernel.org Signed-off-by: Brian Norris Link: https://lore.kernel.org/r/20190726224758.210953-1-briannorris@chromium.org Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a99ad0325309..4c888dc9bd81 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2042,6 +2042,16 @@ ieee80211_sta_wmm_params(struct ieee80211_local *local, ieee80211_regulatory_limit_wmm_params(sdata, ¶ms[ac], ac); } + /* WMM specification requires all 4 ACIs. */ + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { + if (params[ac].cw_min == 0) { + sdata_info(sdata, + "AP has invalid WMM params (missing AC %d), using defaults\n", + ac); + return false; + } + } + for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { mlme_dbg(sdata, "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n", -- cgit From b55f3b841099e641bdb2701d361a4c304e2dbd6f Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Mon, 29 Jul 2019 16:23:32 +0800 Subject: mac80211_hwsim: Fix possible null-pointer dereferences in hwsim_dump_radio_nl() In hwsim_dump_radio_nl(), when genlmsg_put() on line 3617 fails, hdr is assigned to NULL. Then hdr is used on lines 3622 and 3623: genl_dump_check_consistent(cb, hdr); genlmsg_end(skb, hdr); Thus, possible null-pointer dereferences may occur. To fix these bugs, hdr is used here when it is not NULL. This bug is found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai Link: https://lore.kernel.org/r/20190729082332.28895-1-baijiaju1990@gmail.com [put braces on all branches] Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 519b4ee88c5c..772e54f0696f 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -3617,10 +3617,12 @@ static int hwsim_dump_radio_nl(struct sk_buff *skb, hdr = genlmsg_put(skb, NETLINK_CB(cb->skb).portid, cb->nlh->nlmsg_seq, &hwsim_genl_family, NLM_F_MULTI, HWSIM_CMD_GET_RADIO); - if (!hdr) + if (hdr) { + genl_dump_check_consistent(cb, hdr); + genlmsg_end(skb, hdr); + } else { res = -EMSGSIZE; - genl_dump_check_consistent(cb, hdr); - genlmsg_end(skb, hdr); + } } done: -- cgit From 3884ae44f41247e0ae41952d4fad46db86d2e0a8 Mon Sep 17 00:00:00 2001 From: Christian Brauner Date: Tue, 23 Jul 2019 10:08:28 +0200 Subject: pidfd: remove obsolete comments from test Since the introduction of CLONE_PIDFD pidfd_send_signal() is independent of CONFIG_PROC_FS. Signed-off-by: Christian Brauner --- tools/testing/selftests/pidfd/pidfd_test.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/tools/testing/selftests/pidfd/pidfd_test.c b/tools/testing/selftests/pidfd/pidfd_test.c index 7eaa8a3de262..b632965e60eb 100644 --- a/tools/testing/selftests/pidfd/pidfd_test.c +++ b/tools/testing/selftests/pidfd/pidfd_test.c @@ -339,13 +339,9 @@ static int test_pidfd_send_signal_syscall_support(void) ret = sys_pidfd_send_signal(pidfd, 0, NULL, 0); if (ret < 0) { - /* - * pidfd_send_signal() will currently return ENOSYS when - * CONFIG_PROC_FS is not set. - */ if (errno == ENOSYS) ksft_exit_skip( - "%s test: pidfd_send_signal() syscall not supported (Ensure that CONFIG_PROC_FS=y is set)\n", + "%s test: pidfd_send_signal() syscall not supported\n", test_name); ksft_exit_fail_msg("%s test: Failed to send signal\n", -- cgit From 1caf7d50f46bd0388e38e653b146aa81700e8eb8 Mon Sep 17 00:00:00 2001 From: "Joel Fernandes (Google)" Date: Wed, 24 Jul 2019 12:48:16 -0400 Subject: pidfd: Add warning if exit_state is 0 during notification Previously a condition got missed where the pidfd waiters are awakened before the exit_state gets set. This can result in a missed notification [1] and the polling thread waiting forever. It is fixed now, however it would be nice to avoid this kind of issue going unnoticed in the future. So just add a warning to catch it in the future. /* References */ [1]: https://lore.kernel.org/lkml/20190717172100.261204-1-joel@joelfernandes.org/ Signed-off-by: Joel Fernandes (Google) Link: https://lore.kernel.org/r/20190724164816.201099-1-joel@joelfernandes.org Signed-off-by: Christian Brauner --- kernel/signal.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/signal.c b/kernel/signal.c index 91b789dd6e72..349f5a67f100 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -1885,6 +1885,7 @@ static void do_notify_pidfd(struct task_struct *task) { struct pid *pid; + WARN_ON(task->exit_state == 0); pid = task_pid(task); wake_up_all(&pid->wait_pidfd); } -- cgit From f14312a93b34b9350dc33ff0b4215c24f4c82617 Mon Sep 17 00:00:00 2001 From: Enrico Weigelt Date: Thu, 25 Jul 2019 21:06:03 +0200 Subject: platform/x86: pcengines-apuv2: use KEY_RESTART for front button The keycode KEY_RESTART is more appropriate for the front button, as most people use it for things like restart or factory reset. Signed-off-by: Enrico Weigelt Fixes: f8eb0235f659 ("x86: pcengines apuv2 gpio/leds/keys platform driver") Signed-off-by: Andy Shevchenko --- drivers/platform/x86/pcengines-apuv2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/pcengines-apuv2.c b/drivers/platform/x86/pcengines-apuv2.c index 96b499c6929a..e4c68efac0c2 100644 --- a/drivers/platform/x86/pcengines-apuv2.c +++ b/drivers/platform/x86/pcengines-apuv2.c @@ -93,7 +93,7 @@ static struct gpiod_lookup_table gpios_led_table = { static struct gpio_keys_button apu2_keys_buttons[] = { { - .code = KEY_SETUP, + .code = KEY_RESTART, .active_low = 1, .desc = "front button", .type = EV_KEY, -- cgit From d655e5b4e1c8ce207f0a1868aa334c4ecdcbddfb Mon Sep 17 00:00:00 2001 From: Julian Wiedmann Date: Tue, 23 Jul 2019 10:24:51 +0200 Subject: s390: clean up qdio.h Fix two typos, document missing fields in the driver initialization data and remove the copy&pasted 'pfmt' field from the qdr struct. Signed-off-by: Julian Wiedmann Reviewed-by: Jens Remus Signed-off-by: Vasily Gorbik --- arch/s390/include/asm/qdio.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h index db5ef22c46e4..f647d565bd6d 100644 --- a/arch/s390/include/asm/qdio.h +++ b/arch/s390/include/asm/qdio.h @@ -28,7 +28,7 @@ * @sliba: storage list information block address * @sla: storage list address * @slsba: storage list state block address - * @akey: access key for DLIB + * @akey: access key for SLIB * @bkey: access key for SL * @ckey: access key for SBALs * @dkey: access key for SLSB @@ -50,11 +50,10 @@ struct qdesfmt0 { /** * struct qdr - queue description record (QDR) * @qfmt: queue format - * @pfmt: implementation dependent parameter format * @ac: adapter characteristics * @iqdcnt: input queue descriptor count * @oqdcnt: output queue descriptor count - * @iqdsz: inpout queue descriptor size + * @iqdsz: input queue descriptor size * @oqdsz: output queue descriptor size * @qiba: queue information block address * @qkey: queue information block key @@ -62,8 +61,7 @@ struct qdesfmt0 { */ struct qdr { u32 qfmt : 8; - u32 pfmt : 8; - u32 : 8; + u32 : 16; u32 ac : 8; u32 : 8; u32 iqdcnt : 8; @@ -327,6 +325,7 @@ typedef void qdio_handler_t(struct ccw_device *, unsigned int, int, * struct qdio_initialize - qdio initialization data * @cdev: associated ccw device * @q_format: queue format + * @qdr_ac: feature flags to set * @adapter_name: name for the adapter * @qib_param_field_format: format for qib_parm_field * @qib_param_field: pointer to 128 bytes or NULL, if no param field @@ -338,6 +337,7 @@ typedef void qdio_handler_t(struct ccw_device *, unsigned int, int, * @input_handler: handler to be called for input queues * @output_handler: handler to be called for output queues * @queue_start_poll_array: polling handlers (one per input queue or NULL) + * @scan_threshold: # of in-use buffers that triggers scan on output queue * @int_parm: interruption parameter * @input_sbal_addr_array: address of no_input_qs * 128 pointers * @output_sbal_addr_array: address of no_output_qs * 128 pointers -- cgit From 3361f3193c747e8b32b9edf60f2567187ed4faef Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 25 Jul 2019 13:52:08 +0200 Subject: s390: update configs Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik --- arch/s390/configs/debug_defconfig | 330 +++++++++++++++++++++-------------- arch/s390/configs/defconfig | 233 ++++++++++++++++--------- arch/s390/configs/zfcpdump_defconfig | 31 ++-- 3 files changed, 366 insertions(+), 228 deletions(-) diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig index e26d4413d34c..74e78ec5beb6 100644 --- a/arch/s390/configs/debug_defconfig +++ b/arch/s390/configs/debug_defconfig @@ -3,6 +3,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_AUDIT=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y @@ -18,55 +19,71 @@ CONFIG_BLK_CGROUP=y CONFIG_CFS_BANDWIDTH=y CONFIG_RT_GROUP_SCHED=y CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_RDMA=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_HUGETLB=y CONFIG_CPUSETS=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_BPF=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y +CONFIG_CHECKPOINT_RESTORE=y CONFIG_SCHED_AUTOGROUP=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_SYSFS_SYSCALL is not set -CONFIG_CHECKPOINT_RESTORE=y CONFIG_BPF_SYSCALL=y CONFIG_USERFAULTFD=y # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y +CONFIG_LIVEPATCH=y +CONFIG_TUNE_ZEC12=y +CONFIG_NR_CPUS=512 +CONFIG_NUMA=y +CONFIG_HZ_100=y +CONFIG_KEXEC_FILE=y +CONFIG_EXPOLINE=y +CONFIG_EXPOLINE_AUTO=y +CONFIG_CHSC_SCH=y +CONFIG_VFIO_CCW=m +CONFIG_VFIO_AP=m +CONFIG_CRASH_DUMP=y +CONFIG_HIBERNATION=y +CONFIG_PM_DEBUG=y +CONFIG_CMM=m +CONFIG_APPLDATA_BASE=y +CONFIG_KVM=m +CONFIG_VHOST_NET=m +CONFIG_VHOST_VSOCK=m CONFIG_OPROFILE=m CONFIG_KPROBES=y CONFIG_JUMP_LABEL=y CONFIG_STATIC_KEYS_SELFTEST=y +CONFIG_REFCOUNT_FULL=y +CONFIG_LOCK_EVENT_COUNTS=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_MODULE_SIG=y +CONFIG_MODULE_SIG_SHA256=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_THROTTLING=y CONFIG_BLK_WBT=y -CONFIG_BLK_WBT_SQ=y +CONFIG_BLK_CGROUP_IOLATENCY=y CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_CFQ_GROUP_IOSCHED=y -CONFIG_DEFAULT_DEADLINE=y -CONFIG_LIVEPATCH=y -CONFIG_TUNE_ZEC12=y -CONFIG_NR_CPUS=512 -CONFIG_NUMA=y -CONFIG_PREEMPT=y -CONFIG_HZ_100=y -CONFIG_KEXEC_FILE=y -CONFIG_KEXEC_VERIFY_SIG=y -CONFIG_EXPOLINE=y -CONFIG_EXPOLINE_AUTO=y +CONFIG_IOSCHED_BFQ=y +CONFIG_BFQ_GROUP_IOSCHED=y +CONFIG_BINFMT_MISC=m CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y @@ -82,17 +99,8 @@ CONFIG_ZSMALLOC=m CONFIG_ZSMALLOC_STAT=y CONFIG_DEFERRED_STRUCT_PAGE_INIT=y CONFIG_IDLE_PAGE_TRACKING=y -CONFIG_PCI=y -CONFIG_PCI_DEBUG=y -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_S390=y -CONFIG_CHSC_SCH=y -CONFIG_VFIO_AP=m -CONFIG_VFIO_CCW=m -CONFIG_CRASH_DUMP=y -CONFIG_BINFMT_MISC=m -CONFIG_HIBERNATION=y -CONFIG_PM_DEBUG=y +CONFIG_PERCPU_STATS=y +CONFIG_GUP_BENCHMARK=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_DIAG=m @@ -121,9 +129,6 @@ CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=m CONFIG_INET_UDP_DIAG=m CONFIG_TCP_CONG_ADVANCED=y @@ -139,10 +144,6 @@ CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_VTI=m CONFIG_IPV6_SIT=m CONFIG_IPV6_GRE=m @@ -264,11 +265,8 @@ CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m CONFIG_IP_VS_PE_SIP=m -CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_TABLES_IPV4=y -CONFIG_NFT_CHAIN_ROUTE_IPV4=m CONFIG_NF_TABLES_ARP=y -CONFIG_NFT_CHAIN_NAT_IPV4=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m @@ -287,10 +285,7 @@ CONFIG_IP_NF_SECURITY=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_NF_CONNTRACK_IPV6=m CONFIG_NF_TABLES_IPV6=y -CONFIG_NFT_CHAIN_ROUTE_IPV6=m -CONFIG_NFT_CHAIN_NAT_IPV6=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -309,7 +304,7 @@ CONFIG_IP6_NF_RAW=m CONFIG_IP6_NF_SECURITY=m CONFIG_IP6_NF_NAT=m CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_NF_TABLES_BRIDGE=y +CONFIG_NF_TABLES_BRIDGE=m CONFIG_RDS=m CONFIG_RDS_RDMA=m CONFIG_RDS_TCP=m @@ -375,9 +370,11 @@ CONFIG_NETLINK_DIAG=m CONFIG_CGROUP_NET_PRIO=y CONFIG_BPF_JIT=y CONFIG_NET_PKTGEN=m +CONFIG_PCI=y +CONFIG_PCI_DEBUG=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_S390=y CONFIG_DEVTMPFS=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=0 CONFIG_CONNECTOR=y CONFIG_ZRAM=m CONFIG_BLK_DEV_LOOP=m @@ -395,7 +392,6 @@ CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m @@ -415,17 +411,19 @@ CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_HP_SW=m CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m -CONFIG_SCSI_OSD_INITIATOR=m -CONFIG_SCSI_OSD_ULD=m CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m +CONFIG_MD_CLUSTER=m +CONFIG_BCACHE=m CONFIG_BLK_DEV_DM=m +CONFIG_DM_UNSTRIPED=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_WRITECACHE=m CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_RAID=m @@ -445,23 +443,78 @@ CONFIG_EQUALIZER=m CONFIG_IFB=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m -CONFIG_VXLAN=m CONFIG_TUN=m CONFIG_VETH=m CONFIG_VIRTIO_NET=m CONFIG_NLMON=m +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_AGERE is not set +# CONFIG_NET_VENDOR_ALACRITECH is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_NET_VENDOR_AMAZON is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_VENDOR_AQUANTIA is not set # CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_ATHEROS is not set +# CONFIG_NET_VENDOR_AURORA is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_BROCADE is not set +# CONFIG_NET_VENDOR_CADENCE is not set +# CONFIG_NET_VENDOR_CAVIUM is not set # CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CISCO is not set +# CONFIG_NET_VENDOR_CORTINA is not set +# CONFIG_NET_VENDOR_DEC is not set +# CONFIG_NET_VENDOR_DLINK is not set +# CONFIG_NET_VENDOR_EMULEX is not set +# CONFIG_NET_VENDOR_EZCHIP is not set +# CONFIG_NET_VENDOR_GOOGLE is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_HUAWEI is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set CONFIG_MLX4_EN=m CONFIG_MLX5_CORE=m CONFIG_MLX5_CORE_EN=y +# CONFIG_MLXFW is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_MICROSEMI is not set +# CONFIG_NET_VENDOR_MYRI is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETERION is not set +# CONFIG_NET_VENDOR_NETRONOME is not set +# CONFIG_NET_VENDOR_NI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +# CONFIG_NET_VENDOR_OKI is not set +# CONFIG_NET_VENDOR_PACKET_ENGINES is not set +# CONFIG_NET_VENDOR_QLOGIC is not set +# CONFIG_NET_VENDOR_QUALCOMM is not set +# CONFIG_NET_VENDOR_RDC is not set +# CONFIG_NET_VENDOR_REALTEK is not set +# CONFIG_NET_VENDOR_RENESAS is not set +# CONFIG_NET_VENDOR_ROCKER is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SOLARFLARE is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_SOCIONEXT is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_SYNOPSYS is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y CONFIG_PPPOE=m CONFIG_PPTP=m CONFIG_PPPOL2TP=m @@ -473,10 +526,13 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set CONFIG_LEGACY_PTY_COUNT=0 +CONFIG_NULL_TTY=m CONFIG_HW_RANDOM_VIRTIO=m CONFIG_RAW_DRIVER=m CONFIG_HANGCHECK_TIMER=m CONFIG_TN3270_FS=y +CONFIG_PPS=m +# CONFIG_PTP_1588_CLOCK is not set # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -498,8 +554,8 @@ CONFIG_VFIO_MDEV_DEVICE=m CONFIG_VIRTIO_PCI=m CONFIG_VIRTIO_BALLOON=m CONFIG_VIRTIO_INPUT=y -CONFIG_S390_AP_IOMMU=y CONFIG_S390_CCW_IOMMU=y +CONFIG_S390_AP_IOMMU=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y @@ -519,6 +575,7 @@ CONFIG_OCFS2_FS=m CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y CONFIG_BTRFS_DEBUG=y +CONFIG_BTRFS_ASSERT=y CONFIG_NILFS2_FS=m CONFIG_FS_DAX=y CONFIG_EXPORTFS_BLOCK_OPS=y @@ -552,8 +609,10 @@ CONFIG_ECRYPT_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_LZ4=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_ZSTD=y CONFIG_ROMFS_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3_ACL=y @@ -564,7 +623,6 @@ CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_V4_SECURITY_LABEL=y CONFIG_CIFS=m -CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_UPCALL=y @@ -580,19 +638,112 @@ CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=m CONFIG_DLM=m +CONFIG_UNICODE=y +CONFIG_PERSISTENT_KEYRINGS=y +CONFIG_BIG_KEYS=y +CONFIG_ENCRYPTED_KEYS=m +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +CONFIG_FORTIFY_SOURCE=y +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_INTEGRITY_SIGNATURE=y +CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y +CONFIG_IMA=y +CONFIG_IMA_DEFAULT_HASH_SHA256=y +CONFIG_IMA_WRITE_POLICY=y +CONFIG_IMA_APPRAISE=y +CONFIG_CRYPTO_USER=m +# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set +CONFIG_CRYPTO_PCRYPT=m +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_DH=m +CONFIG_CRYPTO_ECDH=m +CONFIG_CRYPTO_ECRDSA=m +CONFIG_CRYPTO_CHACHA20POLY1305=m +CONFIG_CRYPTO_AEGIS128=m +CONFIG_CRYPTO_AEGIS128L=m +CONFIG_CRYPTO_AEGIS256=m +CONFIG_CRYPTO_MORUS640=m +CONFIG_CRYPTO_MORUS1280=m +CONFIG_CRYPTO_CFB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_KEYWRAP=m +CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_XXHASH=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA3=m +CONFIG_CRYPTO_SM3=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_AES_TI=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_SM4=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_842=m +CONFIG_CRYPTO_LZ4=m +CONFIG_CRYPTO_LZ4HC=m +CONFIG_CRYPTO_ZSTD=m +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_USER_API_RNG=m +CONFIG_CRYPTO_USER_API_AEAD=m +CONFIG_CRYPTO_STATS=y +CONFIG_ZCRYPT=m +CONFIG_PKEY=m +CONFIG_CRYPTO_PAES_S390=m +CONFIG_CRYPTO_SHA1_S390=m +CONFIG_CRYPTO_SHA256_S390=m +CONFIG_CRYPTO_SHA512_S390=m +CONFIG_CRYPTO_DES_S390=m +CONFIG_CRYPTO_AES_S390=m +CONFIG_CRYPTO_GHASH_S390=m +CONFIG_CRYPTO_CRC32_S390=y +CONFIG_CORDIC=m +CONFIG_CRC32_SELFTEST=y +CONFIG_CRC4=m +CONFIG_CRC7=m +CONFIG_CRC8=m +CONFIG_RANDOM32_SELFTEST=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=0 +CONFIG_DMA_API_DEBUG=y +CONFIG_STRING_SELFTEST=y CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_INFO_DWARF4=y CONFIG_GDB_SCRIPTS=y CONFIG_FRAME_WARN=1024 -CONFIG_READABLE_ASM=y CONFIG_UNUSED_SYMBOLS=y CONFIG_HEADERS_INSTALL=y CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_PAGEALLOC=y +CONFIG_PAGE_OWNER=y CONFIG_DEBUG_RODATA_TEST=y CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_SELFTEST=y @@ -645,7 +796,6 @@ CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_FUNCTION_PROFILER=y CONFIG_HIST_TRIGGERS=y -CONFIG_DMA_API_DEBUG=y CONFIG_LKDTM=m CONFIG_TEST_LIST_SORT=y CONFIG_TEST_SORT=y @@ -657,85 +807,3 @@ CONFIG_ATOMIC64_SELFTEST=y CONFIG_TEST_BPF=m CONFIG_BUG_ON_DATA_CORRUPTION=y CONFIG_S390_PTDUMP=y -CONFIG_PERSISTENT_KEYRINGS=y -CONFIG_BIG_KEYS=y -CONFIG_ENCRYPTED_KEYS=m -CONFIG_SECURITY=y -CONFIG_SECURITY_NETWORK=y -CONFIG_FORTIFY_SOURCE=y -CONFIG_SECURITY_SELINUX=y -CONFIG_SECURITY_SELINUX_BOOTPARAM=y -CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 -CONFIG_SECURITY_SELINUX_DISABLE=y -CONFIG_INTEGRITY_SIGNATURE=y -CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y -CONFIG_IMA=y -CONFIG_IMA_DEFAULT_HASH_SHA256=y -CONFIG_IMA_WRITE_POLICY=y -CONFIG_IMA_APPRAISE=y -CONFIG_CRYPTO_DH=m -CONFIG_CRYPTO_ECDH=m -CONFIG_CRYPTO_USER=m -# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set -CONFIG_CRYPTO_PCRYPT=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_CHACHA20POLY1305=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_KEYWRAP=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_CRC32=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_SHA3=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES_TI=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_842=m -CONFIG_CRYPTO_LZ4=m -CONFIG_CRYPTO_LZ4HC=m -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_USER_API_HASH=m -CONFIG_CRYPTO_USER_API_SKCIPHER=m -CONFIG_CRYPTO_USER_API_RNG=m -CONFIG_CRYPTO_USER_API_AEAD=m -CONFIG_ZCRYPT=m -CONFIG_PKEY=m -CONFIG_CRYPTO_PAES_S390=m -CONFIG_CRYPTO_SHA1_S390=m -CONFIG_CRYPTO_SHA256_S390=m -CONFIG_CRYPTO_SHA512_S390=m -CONFIG_CRYPTO_DES_S390=m -CONFIG_CRYPTO_AES_S390=m -CONFIG_CRYPTO_GHASH_S390=m -CONFIG_CRYPTO_CRC32_S390=y -CONFIG_PKCS7_MESSAGE_PARSER=y -CONFIG_SYSTEM_TRUSTED_KEYRING=y -CONFIG_CRC7=m -CONFIG_CRC8=m -CONFIG_RANDOM32_SELFTEST=y -CONFIG_CORDIC=m -CONFIG_CMM=m -CONFIG_APPLDATA_BASE=y -CONFIG_KVM=m -CONFIG_KVM_S390_UCONTROL=y -CONFIG_VHOST_NET=m -CONFIG_VHOST_VSOCK=m diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig index e4bc40073003..68d3ca83302b 100644 --- a/arch/s390/configs/defconfig +++ b/arch/s390/configs/defconfig @@ -12,30 +12,51 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NUMA_BALANCING=y -# CONFIG_NUMA_BALANCING_DEFAULT_ENABLED is not set CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y CONFIG_BLK_CGROUP=y CONFIG_CFS_BANDWIDTH=y CONFIG_RT_GROUP_SCHED=y CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_RDMA=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_HUGETLB=y CONFIG_CPUSETS=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_BPF=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y +CONFIG_CHECKPOINT_RESTORE=y CONFIG_SCHED_AUTOGROUP=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_SYSFS_SYSCALL is not set -CONFIG_CHECKPOINT_RESTORE=y CONFIG_BPF_SYSCALL=y CONFIG_USERFAULTFD=y # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y +CONFIG_LIVEPATCH=y +CONFIG_TUNE_ZEC12=y +CONFIG_NR_CPUS=512 +CONFIG_NUMA=y +# CONFIG_NUMA_EMU is not set +CONFIG_HZ_100=y +CONFIG_KEXEC_FILE=y +CONFIG_EXPOLINE=y +CONFIG_EXPOLINE_AUTO=y +CONFIG_CHSC_SCH=y +CONFIG_VFIO_CCW=m +CONFIG_VFIO_AP=m +CONFIG_CRASH_DUMP=y +CONFIG_HIBERNATION=y +CONFIG_PM_DEBUG=y +CONFIG_CMM=m +CONFIG_APPLDATA_BASE=y +CONFIG_KVM=m +CONFIG_VHOST_NET=m +CONFIG_VHOST_VSOCK=m CONFIG_OPROFILE=m CONFIG_KPROBES=y CONFIG_JUMP_LABEL=y @@ -47,27 +68,18 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_MODULE_SIG=y CONFIG_MODULE_SIG_SHA256=y -CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_THROTTLING=y CONFIG_BLK_WBT=y -CONFIG_BLK_WBT_SQ=y +CONFIG_BLK_CGROUP_IOLATENCY=y CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_CFQ_GROUP_IOSCHED=y -CONFIG_DEFAULT_DEADLINE=y -CONFIG_LIVEPATCH=y -CONFIG_TUNE_ZEC12=y -CONFIG_NR_CPUS=512 -CONFIG_NUMA=y -CONFIG_HZ_100=y -CONFIG_KEXEC_FILE=y -CONFIG_KEXEC_VERIFY_SIG=y -CONFIG_EXPOLINE=y -CONFIG_EXPOLINE_AUTO=y +CONFIG_IOSCHED_BFQ=y +CONFIG_BFQ_GROUP_IOSCHED=y +CONFIG_BINFMT_MISC=m CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y @@ -81,16 +93,8 @@ CONFIG_ZSMALLOC=m CONFIG_ZSMALLOC_STAT=y CONFIG_DEFERRED_STRUCT_PAGE_INIT=y CONFIG_IDLE_PAGE_TRACKING=y -CONFIG_PCI=y -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_S390=y -CONFIG_CHSC_SCH=y -CONFIG_VFIO_AP=m -CONFIG_VFIO_CCW=m -CONFIG_CRASH_DUMP=y -CONFIG_BINFMT_MISC=m -CONFIG_HIBERNATION=y -CONFIG_PM_DEBUG=y +CONFIG_PERCPU_STATS=y +CONFIG_GUP_BENCHMARK=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_DIAG=m @@ -119,9 +123,6 @@ CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=m CONFIG_INET_UDP_DIAG=m CONFIG_TCP_CONG_ADVANCED=y @@ -137,10 +138,6 @@ CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_VTI=m CONFIG_IPV6_SIT=m CONFIG_IPV6_GRE=m @@ -262,11 +259,8 @@ CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m CONFIG_IP_VS_PE_SIP=m -CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_TABLES_IPV4=y -CONFIG_NFT_CHAIN_ROUTE_IPV4=m CONFIG_NF_TABLES_ARP=y -CONFIG_NFT_CHAIN_NAT_IPV4=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m @@ -285,10 +279,7 @@ CONFIG_IP_NF_SECURITY=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_NF_CONNTRACK_IPV6=m CONFIG_NF_TABLES_IPV6=y -CONFIG_NFT_CHAIN_ROUTE_IPV6=m -CONFIG_NFT_CHAIN_NAT_IPV6=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -307,7 +298,7 @@ CONFIG_IP6_NF_RAW=m CONFIG_IP6_NF_SECURITY=m CONFIG_IP6_NF_NAT=m CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_NF_TABLES_BRIDGE=y +CONFIG_NF_TABLES_BRIDGE=m CONFIG_RDS=m CONFIG_RDS_RDMA=m CONFIG_RDS_TCP=m @@ -372,9 +363,11 @@ CONFIG_NETLINK_DIAG=m CONFIG_CGROUP_NET_PRIO=y CONFIG_BPF_JIT=y CONFIG_NET_PKTGEN=m +CONFIG_PCI=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_S390=y +CONFIG_UEVENT_HELPER=y CONFIG_DEVTMPFS=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=0 CONFIG_CONNECTOR=y CONFIG_ZRAM=m CONFIG_BLK_DEV_LOOP=m @@ -383,6 +376,7 @@ CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XPRAM is not set CONFIG_VIRTIO_BLK=y CONFIG_BLK_DEV_RBD=m CONFIG_BLK_DEV_NVME=m @@ -392,7 +386,6 @@ CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m @@ -412,17 +405,19 @@ CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_HP_SW=m CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m -CONFIG_SCSI_OSD_INITIATOR=m -CONFIG_SCSI_OSD_ULD=m CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m +CONFIG_MD_CLUSTER=m +CONFIG_BCACHE=m CONFIG_BLK_DEV_DM=m +CONFIG_DM_UNSTRIPED=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_WRITECACHE=m CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_RAID=m @@ -435,6 +430,7 @@ CONFIG_DM_UEVENT=y CONFIG_DM_FLAKEY=m CONFIG_DM_VERITY=m CONFIG_DM_SWITCH=m +CONFIG_DM_INTEGRITY=m CONFIG_NETDEVICES=y CONFIG_BONDING=m CONFIG_DUMMY=m @@ -442,23 +438,78 @@ CONFIG_EQUALIZER=m CONFIG_IFB=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m -CONFIG_VXLAN=m CONFIG_TUN=m CONFIG_VETH=m CONFIG_VIRTIO_NET=m CONFIG_NLMON=m +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_AGERE is not set +# CONFIG_NET_VENDOR_ALACRITECH is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_NET_VENDOR_AMAZON is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_VENDOR_AQUANTIA is not set # CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_ATHEROS is not set +# CONFIG_NET_VENDOR_AURORA is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_BROCADE is not set +# CONFIG_NET_VENDOR_CADENCE is not set +# CONFIG_NET_VENDOR_CAVIUM is not set # CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CISCO is not set +# CONFIG_NET_VENDOR_CORTINA is not set +# CONFIG_NET_VENDOR_DEC is not set +# CONFIG_NET_VENDOR_DLINK is not set +# CONFIG_NET_VENDOR_EMULEX is not set +# CONFIG_NET_VENDOR_EZCHIP is not set +# CONFIG_NET_VENDOR_GOOGLE is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_HUAWEI is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set CONFIG_MLX4_EN=m CONFIG_MLX5_CORE=m CONFIG_MLX5_CORE_EN=y +# CONFIG_MLXFW is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_MICROSEMI is not set +# CONFIG_NET_VENDOR_MYRI is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETERION is not set +# CONFIG_NET_VENDOR_NETRONOME is not set +# CONFIG_NET_VENDOR_NI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +# CONFIG_NET_VENDOR_OKI is not set +# CONFIG_NET_VENDOR_PACKET_ENGINES is not set +# CONFIG_NET_VENDOR_QLOGIC is not set +# CONFIG_NET_VENDOR_QUALCOMM is not set +# CONFIG_NET_VENDOR_RDC is not set +# CONFIG_NET_VENDOR_REALTEK is not set +# CONFIG_NET_VENDOR_RENESAS is not set +# CONFIG_NET_VENDOR_ROCKER is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SOLARFLARE is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_SOCIONEXT is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_SYNOPSYS is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y CONFIG_PPPOE=m CONFIG_PPTP=m CONFIG_PPPOL2TP=m @@ -470,17 +521,21 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set CONFIG_LEGACY_PTY_COUNT=0 +CONFIG_NULL_TTY=m CONFIG_HW_RANDOM_VIRTIO=m CONFIG_RAW_DRIVER=m CONFIG_HANGCHECK_TIMER=m CONFIG_TN3270_FS=y +# CONFIG_PTP_1588_CLOCK is not set # CONFIG_HWMON is not set CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_SOFT_WATCHDOG=m CONFIG_DIAG288_WATCHDOG=m CONFIG_DRM=y CONFIG_DRM_VIRTIO_GPU=y +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set @@ -495,8 +550,8 @@ CONFIG_VFIO_MDEV_DEVICE=m CONFIG_VIRTIO_PCI=m CONFIG_VIRTIO_BALLOON=m CONFIG_VIRTIO_INPUT=y -CONFIG_S390_AP_IOMMU=y CONFIG_S390_CCW_IOMMU=y +CONFIG_S390_AP_IOMMU=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y @@ -546,8 +601,10 @@ CONFIG_ECRYPT_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_LZ4=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_ZSTD=y CONFIG_ROMFS_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3_ACL=y @@ -558,7 +615,6 @@ CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_V4_SECURITY_LABEL=y CONFIG_CIFS=m -CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_UPCALL=y @@ -574,31 +630,7 @@ CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=m CONFIG_DLM=m -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_INFO_DWARF4=y -CONFIG_GDB_SCRIPTS=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -CONFIG_UNUSED_SYMBOLS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_MEMORY_INIT=y -CONFIG_PANIC_ON_OOPS=y -CONFIG_RCU_TORTURE_TEST=m -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -CONFIG_LATENCYTOP=y -CONFIG_SCHED_TRACER=y -CONFIG_FTRACE_SYSCALLS=y -CONFIG_STACK_TRACER=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_FUNCTION_PROFILER=y -CONFIG_HIST_TRIGGERS=y -CONFIG_LKDTM=m -CONFIG_PERCPU_TEST=m -CONFIG_ATOMIC64_SELFTEST=y -CONFIG_TEST_BPF=m -CONFIG_BUG_ON_DATA_CORRUPTION=y -CONFIG_S390_PTDUMP=y +CONFIG_UNICODE=y CONFIG_PERSISTENT_KEYRINGS=y CONFIG_BIG_KEYS=y CONFIG_ENCRYPTED_KEYS=m @@ -606,7 +638,6 @@ CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y -CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_INTEGRITY_SIGNATURE=y CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y @@ -615,31 +646,42 @@ CONFIG_IMA_DEFAULT_HASH_SHA256=y CONFIG_IMA_WRITE_POLICY=y CONFIG_IMA_APPRAISE=y CONFIG_CRYPTO_FIPS=y -CONFIG_CRYPTO_DH=m -CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_USER=m # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_CRYPTO_PCRYPT=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_DH=m +CONFIG_CRYPTO_ECDH=m +CONFIG_CRYPTO_ECRDSA=m CONFIG_CRYPTO_CHACHA20POLY1305=m +CONFIG_CRYPTO_AEGIS128=m +CONFIG_CRYPTO_AEGIS128L=m +CONFIG_CRYPTO_AEGIS256=m +CONFIG_CRYPTO_MORUS640=m +CONFIG_CRYPTO_MORUS1280=m +CONFIG_CRYPTO_CFB=m CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_OFB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_KEYWRAP=m +CONFIG_CRYPTO_ADIANTUM=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_XXHASH=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_SHA3=m +CONFIG_CRYPTO_SM3=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_AES_TI=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m @@ -649,16 +691,19 @@ CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_SM4=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_842=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m +CONFIG_CRYPTO_ZSTD=m CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_USER_API_AEAD=m +CONFIG_CRYPTO_STATS=y CONFIG_ZCRYPT=m CONFIG_PKEY=m CONFIG_CRYPTO_PAES_S390=m @@ -669,12 +714,34 @@ CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRYPTO_GHASH_S390=m CONFIG_CRYPTO_CRC32_S390=y +CONFIG_CORDIC=m +CONFIG_CRC4=m CONFIG_CRC7=m CONFIG_CRC8=m -CONFIG_CORDIC=m -CONFIG_CMM=m -CONFIG_APPLDATA_BASE=y -CONFIG_KVM=m -CONFIG_KVM_S390_UCONTROL=y -CONFIG_VHOST_NET=m -CONFIG_VHOST_VSOCK=m +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=0 +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_GDB_SCRIPTS=y +CONFIG_FRAME_WARN=1024 +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_PANIC_ON_OOPS=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +CONFIG_LATENCYTOP=y +CONFIG_SCHED_TRACER=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_STACK_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_FUNCTION_PROFILER=y +CONFIG_HIST_TRIGGERS=y +CONFIG_LKDTM=m +CONFIG_PERCPU_TEST=m +CONFIG_ATOMIC64_SELFTEST=y +CONFIG_TEST_BPF=m +CONFIG_BUG_ON_DATA_CORRUPTION=y +CONFIG_S390_PTDUMP=y diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig index d92bab844b73..be09a208b608 100644 --- a/arch/s390/configs/zfcpdump_defconfig +++ b/arch/s390/configs/zfcpdump_defconfig @@ -1,27 +1,33 @@ # CONFIG_SWAP is not set CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y +# CONFIG_CPU_ISOLATION is not set +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_COMPAT_BRK is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_IBM_PARTITION=y -CONFIG_DEFAULT_DEADLINE=y CONFIG_TUNE_ZEC12=y # CONFIG_COMPAT is not set CONFIG_NR_CPUS=2 -# CONFIG_HOTPLUG_CPU is not set CONFIG_HZ_100=y # CONFIG_ARCH_RANDOM is not set -# CONFIG_COMPACTION is not set -# CONFIG_MIGRATION is not set -# CONFIG_BOUNCE is not set -# CONFIG_CHECK_STACK is not set +# CONFIG_RELOCATABLE is not set # CONFIG_CHSC_SCH is not set # CONFIG_SCM_BUS is not set CONFIG_CRASH_DUMP=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_SECCOMP is not set +# CONFIG_PFAULT is not set +# CONFIG_S390_HYPFS_FS is not set +# CONFIG_VIRTUALIZATION is not set +# CONFIG_S390_GUEST is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_IBM_PARTITION=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_COMPACTION is not set +# CONFIG_MIGRATION is not set +# CONFIG_BOUNCE is not set CONFIG_NET=y # CONFIG_IUCV is not set CONFIG_DEVTMPFS=y @@ -43,7 +49,6 @@ CONFIG_ZFCP=y # CONFIG_HVC_IUCV is not set # CONFIG_HW_RANDOM_S390 is not set CONFIG_RAW_DRIVER=y -# CONFIG_SCLP_ASYNC is not set # CONFIG_HMC_DRV is not set # CONFIG_S390_TAPE is not set # CONFIG_VMCP is not set @@ -56,6 +61,7 @@ CONFIG_RAW_DRIVER=y CONFIG_CONFIGFS_FS=y # CONFIG_MISC_FILESYSTEMS is not set # CONFIG_NETWORK_FILESYSTEMS is not set +# CONFIG_DIMLIB is not set CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y @@ -64,7 +70,4 @@ CONFIG_PANIC_ON_OOPS=y # CONFIG_SCHED_DEBUG is not set CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_FTRACE is not set -# CONFIG_PFAULT is not set -# CONFIG_S390_HYPFS_FS is not set -# CONFIG_VIRTUALIZATION is not set -# CONFIG_S390_GUEST is not set +# CONFIG_RUNTIME_TESTING_MENU is not set -- cgit From 868202ce15a7b52534257426a94f40b6d9f6150f Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Wed, 17 Jul 2019 19:38:42 +0200 Subject: s390/boot: add missing declarations and includes Add __swsusp_reset_dma declaration to avoid the following sparse warnings: arch/s390/kernel/setup.c:107:15: warning: symbol '__swsusp_reset_dma' was not declared. Should it be static? arch/s390/boot/startup.c:52:15: warning: symbol '__swsusp_reset_dma' was not declared. Should it be static? Add verify_facilities declaration to avoid the following sparse warning: arch/s390/boot/als.c:105:6: warning: symbol 'verify_facilities' was not declared. Should it be static? Include "boot.h" into arch/s390/boot/kaslr.c to expose get_random_base function declaration and avoid the following sparse warning: arch/s390/boot/kaslr.c:90:15: warning: symbol 'get_random_base' was not declared. Should it be static? Signed-off-by: Vasily Gorbik --- arch/s390/boot/boot.h | 1 + arch/s390/boot/kaslr.c | 1 + arch/s390/include/asm/setup.h | 1 + 3 files changed, 3 insertions(+) diff --git a/arch/s390/boot/boot.h b/arch/s390/boot/boot.h index 082905d97309..1c3b2b257637 100644 --- a/arch/s390/boot/boot.h +++ b/arch/s390/boot/boot.h @@ -8,6 +8,7 @@ void store_ipl_parmblock(void); void setup_boot_command_line(void); void parse_boot_command_line(void); void setup_memory_end(void); +void verify_facilities(void); void print_missing_facilities(void); unsigned long get_random_base(unsigned long safe_addr); diff --git a/arch/s390/boot/kaslr.c b/arch/s390/boot/kaslr.c index 3bdd8132e56b..c34a6387ce38 100644 --- a/arch/s390/boot/kaslr.c +++ b/arch/s390/boot/kaslr.c @@ -7,6 +7,7 @@ #include #include #include "compressed/decompressor.h" +#include "boot.h" #define PRNG_MODE_TDES 1 #define PRNG_MODE_SHA512 2 diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h index c5cfff7b1f91..70bd65724ec4 100644 --- a/arch/s390/include/asm/setup.h +++ b/arch/s390/include/asm/setup.h @@ -84,6 +84,7 @@ extern int noexec_disabled; extern int memory_end_set; extern unsigned long memory_end; extern unsigned long max_physmem_end; +extern unsigned long __swsusp_reset_dma; #define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM) #define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM) -- cgit From d25220d2f2ece9e516588ed5df2ed373069b3a02 Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Wed, 17 Jul 2019 20:07:42 +0200 Subject: s390/lib: add missing include Include into arch/s390/lib/xor.c to expose xor_block_xc declaration and avoid the following sparse warning: arch/s390/lib/xor.c:128:27: warning: symbol 'xor_block_xc' was not declared. Should it be static? Signed-off-by: Vasily Gorbik --- arch/s390/lib/xor.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/lib/xor.c b/arch/s390/lib/xor.c index 96580590ccaf..29d9470dbceb 100644 --- a/arch/s390/lib/xor.c +++ b/arch/s390/lib/xor.c @@ -9,6 +9,7 @@ #include #include #include +#include static void xor_xc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) { -- cgit From 06f9895fda39422fb9250a78454e69aadace13c7 Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Wed, 17 Jul 2019 20:05:11 +0200 Subject: s390/perf: make cf_diag_csd static Since there is really no reason for cf_diag_csd per cpu variable to be globally visible make it static to avoid the following sparse warning: arch/s390/kernel/perf_cpum_cf_diag.c:37:1: warning: symbol 'cf_diag_csd' was not declared. Should it be static? Signed-off-by: Vasily Gorbik --- arch/s390/kernel/perf_cpum_cf_diag.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/kernel/perf_cpum_cf_diag.c b/arch/s390/kernel/perf_cpum_cf_diag.c index d4e031f7b9c8..5f1fd1581330 100644 --- a/arch/s390/kernel/perf_cpum_cf_diag.c +++ b/arch/s390/kernel/perf_cpum_cf_diag.c @@ -34,7 +34,7 @@ struct cf_diag_csd { /* Counter set data per CPU */ unsigned char start[PAGE_SIZE]; /* Counter set at event start */ unsigned char data[PAGE_SIZE]; /* Counter set at event delete */ }; -DEFINE_PER_CPU(struct cf_diag_csd, cf_diag_csd); +static DEFINE_PER_CPU(struct cf_diag_csd, cf_diag_csd); /* Counter sets are stored as data stream in a page sized memory buffer and * exported to user space via raw data attached to the event sample data. -- cgit From 1877011a3568fcadf2ee28f4d02fe5c31b1bb060 Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Wed, 17 Jul 2019 19:42:22 +0200 Subject: s390/kexec: add missing include to machine_kexec_reloc.c Include into machine_kexec_reloc.c to expose arch_kexec_do_relocs declaration and avoid the following sparse warnings: arch/s390/kernel/machine_kexec_reloc.c:4:5: warning: symbol 'arch_kexec_do_relocs' was not declared. Should it be static? arch/s390/boot/../kernel/machine_kexec_reloc.c:4:5: warning: symbol 'arch_kexec_do_relocs' was not declared. Should it be static? Signed-off-by: Vasily Gorbik --- arch/s390/kernel/machine_kexec_reloc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/kernel/machine_kexec_reloc.c b/arch/s390/kernel/machine_kexec_reloc.c index 1dded39239f8..3b664cb3ec4d 100644 --- a/arch/s390/kernel/machine_kexec_reloc.c +++ b/arch/s390/kernel/machine_kexec_reloc.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include +#include int arch_kexec_do_relocs(int r_type, void *loc, unsigned long val, unsigned long addr) -- cgit From ffbd268506ca70c2cd18238762a29b9a47d8d9fa Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Wed, 17 Jul 2019 19:41:09 +0200 Subject: s390/mm: make gmap_test_and_clear_dirty_pmd static Since gmap_test_and_clear_dirty_pmd is not exported and has no reason to be globally visible make it static to avoid the following sparse warning: arch/s390/mm/gmap.c:2427:6: warning: symbol 'gmap_test_and_clear_dirty_pmd' was not declared. Should it be static? Signed-off-by: Vasily Gorbik --- arch/s390/mm/gmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c index 1e668b95e0c6..39c3a6e3d262 100644 --- a/arch/s390/mm/gmap.c +++ b/arch/s390/mm/gmap.c @@ -2424,8 +2424,8 @@ EXPORT_SYMBOL_GPL(gmap_pmdp_idte_global); * This function is assumed to be called with the guest_table_lock * held. */ -bool gmap_test_and_clear_dirty_pmd(struct gmap *gmap, pmd_t *pmdp, - unsigned long gaddr) +static bool gmap_test_and_clear_dirty_pmd(struct gmap *gmap, pmd_t *pmdp, + unsigned long gaddr) { if (pmd_val(*pmdp) & _SEGMENT_ENTRY_INVALID) return false; -- cgit From 7f5aa1154b1a30653a12e0f7f473494de77ad670 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 29 Jul 2019 07:39:44 +0200 Subject: s390/mm: add fallthrough annotations Commit a035d552a93b ("Makefile: Globally enable fall-through warning") enables fall-through warnings globally. Add missing annotations. Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik --- arch/s390/mm/fault.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 63507662828f..7b0bb475c166 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -327,6 +327,7 @@ static noinline void do_fault_error(struct pt_regs *regs, int access, case VM_FAULT_BADACCESS: if (access == VM_EXEC && signal_return(regs) == 0) break; + /* fallthrough */ case VM_FAULT_BADMAP: /* Bad memory access. Check if it is kernel or user space. */ if (user_mode(regs)) { @@ -336,7 +337,9 @@ static noinline void do_fault_error(struct pt_regs *regs, int access, do_sigsegv(regs, si_code); break; } + /* fallthrough */ case VM_FAULT_BADCONTEXT: + /* fallthrough */ case VM_FAULT_PFAULT: do_no_context(regs); break; -- cgit From 90a93ff4051ede8320c5576d99f34e0f75e99c1a Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 29 Jul 2019 07:47:02 +0200 Subject: s390/tape: add fallthrough annotations Commit a035d552a93b ("Makefile: Globally enable fall-through warning") enables fall-through warnings globally. Add missing annotations. Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik --- drivers/s390/char/tape_core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c index 8d3370da2dfc..3e0b2f63a9d2 100644 --- a/drivers/s390/char/tape_core.c +++ b/drivers/s390/char/tape_core.c @@ -677,6 +677,7 @@ tape_generic_remove(struct ccw_device *cdev) switch (device->tape_state) { case TS_INIT: tape_state_set(device, TS_NOT_OPER); + /* fallthrough */ case TS_NOT_OPER: /* * Nothing to do. @@ -949,6 +950,7 @@ __tape_start_request(struct tape_device *device, struct tape_request *request) break; if (device->tape_state == TS_UNUSED) break; + /* fallthrough */ default: if (device->tape_state == TS_BLKUSE) break; @@ -1116,6 +1118,7 @@ __tape_do_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb) case -ETIMEDOUT: DBF_LH(1, "(%08x): Request timed out\n", device->cdev_id); + /* fallthrough */ case -EIO: __tape_end_request(device, request, -EIO); break; -- cgit From 943dd5fa70ada0266c3a572c641be537b69ae2a8 Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Mon, 29 Jul 2019 01:01:21 +0200 Subject: s390/3215: add switch fall through comment for -Wimplicit-fallthrough Silence the following warning when built with -Wimplicit-fallthrough=3 enabled by default since 5.3-rc2: drivers/s390/char/con3215.c: In function 'raw3215_irq': drivers/s390/char/con3215.c:399:6: warning: this statement may fall through [-Wimplicit-fallthrough=] 399 | if (dstat == 0x08) | ^ drivers/s390/char/con3215.c:401:2: note: here 401 | case 0x04: | ^~~~ Signed-off-by: Vasily Gorbik --- drivers/s390/char/con3215.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c index 8c9d412b6d33..e7cf0a1d4f71 100644 --- a/drivers/s390/char/con3215.c +++ b/drivers/s390/char/con3215.c @@ -398,6 +398,7 @@ static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm, } if (dstat == 0x08) break; + /* else, fall through */ case 0x04: /* Device end interrupt. */ if ((raw = req->info) == NULL) -- cgit From 8480657280ee769ad23101297e1e6be0f8d205ec Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Wed, 17 Jul 2019 20:09:28 +0200 Subject: vfio-ccw: make vfio_ccw_async_region_ops static Since vfio_ccw_async_region_ops is not exported and has no reason to be globally visible make it static to avoid the following sparse warning: drivers/s390/cio/vfio_ccw_async.c:73:30: warning: symbol 'vfio_ccw_async_region_ops' was not declared. Should it be static? Fixes: d5afd5d135c8 ("vfio-ccw: add handling for async channel instructions") Reviewed-by: Cornelia Huck Signed-off-by: Vasily Gorbik --- drivers/s390/cio/vfio_ccw_async.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/cio/vfio_ccw_async.c b/drivers/s390/cio/vfio_ccw_async.c index 8c1d2357ef5b..7a838e3d7c0f 100644 --- a/drivers/s390/cio/vfio_ccw_async.c +++ b/drivers/s390/cio/vfio_ccw_async.c @@ -70,7 +70,7 @@ static void vfio_ccw_async_region_release(struct vfio_ccw_private *private, } -const struct vfio_ccw_regops vfio_ccw_async_region_ops = { +static const struct vfio_ccw_regops vfio_ccw_async_region_ops = { .read = vfio_ccw_async_region_read, .write = vfio_ccw_async_region_write, .release = vfio_ccw_async_region_release, -- cgit From a07fc0bb483eb24444cebd59a8112ce6e6964c48 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Wed, 24 Jul 2019 14:54:43 +0800 Subject: RDMA/hns: Fix build error If INFINIBAND_HNS_HIP08 is selected and HNS3 is m, but INFINIBAND_HNS is y, building fails: drivers/infiniband/hw/hns/hns_roce_hw_v2.o: In function `hns_roce_hw_v2_exit': hns_roce_hw_v2.c:(.exit.text+0xd): undefined reference to `hnae3_unregister_client' drivers/infiniband/hw/hns/hns_roce_hw_v2.o: In function `hns_roce_hw_v2_init': hns_roce_hw_v2.c:(.init.text+0xd): undefined reference to `hnae3_register_client' Also if INFINIBAND_HNS_HIP06 is selected and HNS_DSAF is m, but INFINIBAND_HNS is y, building fails: drivers/infiniband/hw/hns/hns_roce_hw_v1.o: In function `hns_roce_v1_reset': hns_roce_hw_v1.c:(.text+0x39fa): undefined reference to `hns_dsaf_roce_reset' hns_roce_hw_v1.c:(.text+0x3a25): undefined reference to `hns_dsaf_roce_reset' Reported-by: Hulk Robot Fixes: dd74282df573 ("RDMA/hns: Initialize the PCI device for hip08 RoCE") Fixes: 08805fdbeb2d ("RDMA/hns: Split hw v1 driver from hns roce driver") Signed-off-by: YueHaibing Link: https://lore.kernel.org/r/20190724065443.53068-1-yuehaibing@huawei.com Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hns/Kconfig | 6 +++--- drivers/infiniband/hw/hns/Makefile | 8 ++------ 2 files changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/hns/Kconfig b/drivers/infiniband/hw/hns/Kconfig index 8bf847bcd8d3..54782197c717 100644 --- a/drivers/infiniband/hw/hns/Kconfig +++ b/drivers/infiniband/hw/hns/Kconfig @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only config INFINIBAND_HNS - tristate "HNS RoCE Driver" + bool "HNS RoCE Driver" depends on NET_VENDOR_HISILICON depends on ARM64 || (COMPILE_TEST && 64BIT) ---help--- @@ -11,7 +11,7 @@ config INFINIBAND_HNS To compile HIP06 or HIP08 driver as module, choose M here. config INFINIBAND_HNS_HIP06 - bool "Hisilicon Hip06 Family RoCE support" + tristate "Hisilicon Hip06 Family RoCE support" depends on INFINIBAND_HNS && HNS && HNS_DSAF && HNS_ENET ---help--- RoCE driver support for Hisilicon RoCE engine in Hisilicon Hip06 and @@ -21,7 +21,7 @@ config INFINIBAND_HNS_HIP06 module will be called hns-roce-hw-v1 config INFINIBAND_HNS_HIP08 - bool "Hisilicon Hip08 Family RoCE support" + tristate "Hisilicon Hip08 Family RoCE support" depends on INFINIBAND_HNS && PCI && HNS3 ---help--- RoCE driver support for Hisilicon RoCE engine in Hisilicon Hip08 SoC. diff --git a/drivers/infiniband/hw/hns/Makefile b/drivers/infiniband/hw/hns/Makefile index e105945b94a1..449a2d81319d 100644 --- a/drivers/infiniband/hw/hns/Makefile +++ b/drivers/infiniband/hw/hns/Makefile @@ -9,12 +9,8 @@ hns-roce-objs := hns_roce_main.o hns_roce_cmd.o hns_roce_pd.o \ hns_roce_ah.o hns_roce_hem.o hns_roce_mr.o hns_roce_qp.o \ hns_roce_cq.o hns_roce_alloc.o hns_roce_db.o hns_roce_srq.o hns_roce_restrack.o -ifdef CONFIG_INFINIBAND_HNS_HIP06 hns-roce-hw-v1-objs := hns_roce_hw_v1.o $(hns-roce-objs) -obj-$(CONFIG_INFINIBAND_HNS) += hns-roce-hw-v1.o -endif +obj-$(CONFIG_INFINIBAND_HNS_HIP06) += hns-roce-hw-v1.o -ifdef CONFIG_INFINIBAND_HNS_HIP08 hns-roce-hw-v2-objs := hns_roce_hw_v2.o hns_roce_hw_v2_dfx.o $(hns-roce-objs) -obj-$(CONFIG_INFINIBAND_HNS) += hns-roce-hw-v2.o -endif +obj-$(CONFIG_INFINIBAND_HNS_HIP08) += hns-roce-hw-v2.o -- cgit From 61c30c98ef17e5a330d7bb8494b78b3d6dffe9b8 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 29 Jul 2019 13:57:49 +0200 Subject: dax: Fix missed wakeup in put_unlocked_entry() The condition checking whether put_unlocked_entry() needs to wake up following waiter got broken by commit 23c84eb78375 ("dax: Fix missed wakeup with PMD faults"). We need to wake the waiter whenever the passed entry is valid (i.e., non-NULL and not special conflict entry). This could lead to processes never being woken up when waiting for entry lock. Fix the condition. Cc: Link: http://lore.kernel.org/r/20190729120228.GC17833@quack2.suse.cz Fixes: 23c84eb78375 ("dax: Fix missed wakeup with PMD faults") Signed-off-by: Jan Kara Signed-off-by: Dan Williams --- fs/dax.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/dax.c b/fs/dax.c index a237141d8787..b64964ef44f6 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -266,7 +266,7 @@ static void wait_entry_unlocked(struct xa_state *xas, void *entry) static void put_unlocked_entry(struct xa_state *xas, void *entry) { /* If we were the only waiter woken, wake the next one */ - if (entry && dax_is_conflict(entry)) + if (entry && !dax_is_conflict(entry)) dax_wake_entry(xas, entry, false); } -- cgit From f3eb2c334a6d3f5e704ecd0b150d5cfe6e3aca40 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 06:09:53 -0500 Subject: arcnet: com90xx: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: powerpc allyesconfig): drivers/net/arcnet/com90xx.c: In function 'com90xx_setup': include/linux/printk.h:304:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/arcnet/com90xx.c:695:3: note: in expansion of macro 'pr_err' pr_err("Too many arguments\n"); ^~~~~~ drivers/net/arcnet/com90xx.c:696:2: note: here case 3: /* Mem address */ ^~~~ drivers/net/arcnet/com90xx.c:697:9: warning: this statement may fall through [-Wimplicit-fallthrough=] shmem = ints[3]; ~~~~~~^~~~~~~~~ drivers/net/arcnet/com90xx.c:698:2: note: here case 2: /* IRQ */ ^~~~ drivers/net/arcnet/com90xx.c:699:7: warning: this statement may fall through [-Wimplicit-fallthrough=] irq = ints[2]; ~~~~^~~~~~~~~ drivers/net/arcnet/com90xx.c:700:2: note: here case 1: /* IO address */ ^~~~ Reported-by: Stephen Rothwell Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Signed-off-by: David S. Miller --- drivers/net/arcnet/com90xx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c index ca4a57c30bf8..bd75d06ad7df 100644 --- a/drivers/net/arcnet/com90xx.c +++ b/drivers/net/arcnet/com90xx.c @@ -693,10 +693,13 @@ static int __init com90xx_setup(char *s) switch (ints[0]) { default: /* ERROR */ pr_err("Too many arguments\n"); + /* Fall through */ case 3: /* Mem address */ shmem = ints[3]; + /* Fall through */ case 2: /* IRQ */ irq = ints[2]; + /* Fall through */ case 1: /* IO address */ io = ints[1]; } -- cgit From 56f37a3fa2190732957882e10ec20adf83c6cb93 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 06:13:20 -0500 Subject: arcnet: com90io: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: powerpc allyesconfig): drivers/net/arcnet/com90io.c: In function 'com90io_setup': include/linux/printk.h:304:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/arcnet/com90io.c:365:3: note: in expansion of macro 'pr_err' pr_err("Too many arguments\n"); ^~~~~~ drivers/net/arcnet/com90io.c:366:2: note: here case 2: /* IRQ */ ^~~~ drivers/net/arcnet/com90io.c:367:7: warning: this statement may fall through [-Wimplicit-fallthrough=] irq = ints[2]; ~~~~^~~~~~~~~ drivers/net/arcnet/com90io.c:368:2: note: here case 1: /* IO address */ ^~~~ Reported-by: Stephen Rothwell Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Signed-off-by: David S. Miller --- drivers/net/arcnet/com90io.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/arcnet/com90io.c b/drivers/net/arcnet/com90io.c index 2c546013a980..186bbf87bc84 100644 --- a/drivers/net/arcnet/com90io.c +++ b/drivers/net/arcnet/com90io.c @@ -363,8 +363,10 @@ static int __init com90io_setup(char *s) switch (ints[0]) { default: /* ERROR */ pr_err("Too many arguments\n"); + /* Fall through */ case 2: /* IRQ */ irq = ints[2]; + /* Fall through */ case 1: /* IO address */ io = ints[1]; } -- cgit From 26027f4243c1a23399b85a3cff9b0b89e405be59 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 06:15:50 -0500 Subject: arcnet: arc-rimi: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: powerpc allyesconfig): drivers/net/arcnet/arc-rimi.c: In function 'arcrimi_setup': include/linux/printk.h:304:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/arcnet/arc-rimi.c:365:3: note: in expansion of macro 'pr_err' pr_err("Too many arguments\n"); ^~~~~~ drivers/net/arcnet/arc-rimi.c:366:2: note: here case 3: /* Node ID */ ^~~~ drivers/net/arcnet/arc-rimi.c:367:8: warning: this statement may fall through [-Wimplicit-fallthrough=] node = ints[3]; ~~~~~^~~~~~~~~ drivers/net/arcnet/arc-rimi.c:368:2: note: here case 2: /* IRQ */ ^~~~ drivers/net/arcnet/arc-rimi.c:369:7: warning: this statement may fall through [-Wimplicit-fallthrough=] irq = ints[2]; ~~~~^~~~~~~~~ drivers/net/arcnet/arc-rimi.c:370:2: note: here case 1: /* IO address */ ^~~~ Reported-by: Stephen Rothwell Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Signed-off-by: David S. Miller --- drivers/net/arcnet/arc-rimi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/arcnet/arc-rimi.c b/drivers/net/arcnet/arc-rimi.c index 11c5bad95226..14a5fb378145 100644 --- a/drivers/net/arcnet/arc-rimi.c +++ b/drivers/net/arcnet/arc-rimi.c @@ -363,10 +363,13 @@ static int __init arcrimi_setup(char *s) switch (ints[0]) { default: /* ERROR */ pr_err("Too many arguments\n"); + /* Fall through */ case 3: /* Node ID */ node = ints[3]; + /* Fall through */ case 2: /* IRQ */ irq = ints[2]; + /* Fall through */ case 1: /* IO address */ io = ints[1]; } -- cgit From a7f9cbf0ed2f67380b547971145e823b9225d39d Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Mon, 29 Jul 2019 14:16:37 +0200 Subject: MAINTAINERS: Remove mailing-list entry for XDP (eXpress Data Path) This removes the mailing list xdp-newbies@vger.kernel.org from the XDP kernel maintainers entry. Being in the kernel MAINTAINERS file successfully caused the list to receive kbuild bot warnings, syzbot reports and sometimes developer patches. The level of details in these messages, doesn't match the target audience of the XDP-newbies list. This is based on a survey on the mailing list, where 73% voted for removal from MAINTAINERS file. Signed-off-by: Jesper Dangaard Brouer Acked-by: Jakub Kicinski Signed-off-by: David S. Miller --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index bbc2efb2b236..9f5b8bd4faf9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -17549,7 +17549,6 @@ M: Jakub Kicinski M: Jesper Dangaard Brouer M: John Fastabend L: netdev@vger.kernel.org -L: xdp-newbies@vger.kernel.org L: bpf@vger.kernel.org S: Supported F: net/core/xdp.c -- cgit From 051c7b39be4a91f6b7d8c4548444e4b850f1f56c Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Mon, 29 Jul 2019 16:24:33 +0800 Subject: net: sched: Fix a possible null-pointer dereference in dequeue_func() In dequeue_func(), there is an if statement on line 74 to check whether skb is NULL: if (skb) When skb is NULL, it is used on line 77: prefetch(&skb->end); Thus, a possible null-pointer dereference may occur. To fix this bug, skb->end is used when skb is not NULL. This bug is found by a static analysis tool STCheck written by us. Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM") Signed-off-by: Jia-Ju Bai Reviewed-by: Jiri Pirko Signed-off-by: David S. Miller --- net/sched/sch_codel.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/sched/sch_codel.c b/net/sched/sch_codel.c index 25ef172c23df..30169b3adbbb 100644 --- a/net/sched/sch_codel.c +++ b/net/sched/sch_codel.c @@ -71,10 +71,10 @@ static struct sk_buff *dequeue_func(struct codel_vars *vars, void *ctx) struct Qdisc *sch = ctx; struct sk_buff *skb = __qdisc_dequeue_head(&sch->q); - if (skb) + if (skb) { sch->qstats.backlog -= qdisc_pkt_len(skb); - - prefetch(&skb->end); /* we'll need skb_shinfo() */ + prefetch(&skb->end); /* we'll need skb_shinfo() */ + } return skb; } -- cgit From d7bae09fa008c6c9a489580db0a5a12063b97f97 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Mon, 29 Jul 2019 12:28:41 +0300 Subject: net: bridge: delete local fdb on device init failure On initialization failure we have to delete the local fdb which was inserted due to the default pvid creation. This problem has been present since the inception of default_pvid. Note that currently there are 2 cases: 1) in br_dev_init() when br_multicast_init() fails 2) if register_netdevice() fails after calling ndo_init() This patch takes care of both since br_vlan_flush() is called on both occasions. Also the new fdb delete would be a no-op on normal bridge device destruction since the local fdb would've been already flushed by br_dev_delete(). This is not an issue for ports since nbp_vlan_init() is called last when adding a port thus nothing can fail after it. Reported-by: syzbot+88533dc8b582309bf3ee@syzkaller.appspotmail.com Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid") Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- net/bridge/br_vlan.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index 021cc9f66804..a544e161c7fa 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c @@ -715,6 +715,11 @@ void br_vlan_flush(struct net_bridge *br) ASSERT_RTNL(); + /* delete auto-added default pvid local fdb before flushing vlans + * otherwise it will be leaked on bridge device init failure + */ + br_fdb_delete_by_port(br, NULL, 0, 1); + vg = br_vlan_group(br); __vlan_flush(vg); RCU_INIT_POINTER(br->vlgrp, NULL); -- cgit From 15fe6a8dcc3b48358c28e17b485fc837f9605ec4 Mon Sep 17 00:00:00 2001 From: Michal Kalderon Date: Sun, 28 Jul 2019 14:13:38 +0300 Subject: RDMA/qedr: Fix the hca_type and hca_rev returned in device attributes There was a place holder for hca_type and vendor was returned in hca_rev. Fix the hca_rev to return the hw revision and fix the hca_type to return an informative string representing the hca. Signed-off-by: Michal Kalderon Link: https://lore.kernel.org/r/20190728111338.21930-1-michal.kalderon@marvell.com Signed-off-by: Doug Ledford --- drivers/infiniband/hw/qedr/main.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/qedr/main.c b/drivers/infiniband/hw/qedr/main.c index 533157a2a3be..f97b3d65b30c 100644 --- a/drivers/infiniband/hw/qedr/main.c +++ b/drivers/infiniband/hw/qedr/main.c @@ -125,14 +125,20 @@ static ssize_t hw_rev_show(struct device *device, struct device_attribute *attr, struct qedr_dev *dev = rdma_device_to_drv_device(device, struct qedr_dev, ibdev); - return scnprintf(buf, PAGE_SIZE, "0x%x\n", dev->pdev->vendor); + return scnprintf(buf, PAGE_SIZE, "0x%x\n", dev->attr.hw_ver); } static DEVICE_ATTR_RO(hw_rev); static ssize_t hca_type_show(struct device *device, struct device_attribute *attr, char *buf) { - return scnprintf(buf, PAGE_SIZE, "%s\n", "HCA_TYPE_TO_SET"); + struct qedr_dev *dev = + rdma_device_to_drv_device(device, struct qedr_dev, ibdev); + + return scnprintf(buf, PAGE_SIZE, "FastLinQ QL%x %s\n", + dev->pdev->device, + rdma_protocol_iwarp(&dev->ibdev, 1) ? + "iWARP" : "RoCE"); } static DEVICE_ATTR_RO(hca_type); -- cgit From 37151a41df800493cfcbbef4f7208ffe04feb959 Mon Sep 17 00:00:00 2001 From: Yuki Tsunashima Date: Mon, 29 Jul 2019 17:10:36 +0200 Subject: ALSA: pcm: fix lost wakeup event scenarios in snd_pcm_drain lost wakeup can occur after enabling irq, therefore put task into interruptible before enabling interrupts, without this change, task can be put to sleep and snd_pcm_drain will delay Fixes: f2b3614cefb6 ("ALSA: PCM - Don't check DMA time-out too shortly") Signed-off-by: Yuki Tsunashima Signed-off-by: Suresh Udipi [ported from 4.9] Signed-off-by: Adam Miartus Signed-off-by: Takashi Iwai --- sound/core/pcm_native.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 12dd9b318db1..703857aab00f 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1873,6 +1873,7 @@ static int snd_pcm_drain(struct snd_pcm_substream *substream, if (!to_check) break; /* all drained */ init_waitqueue_entry(&wait, current); + set_current_state(TASK_INTERRUPTIBLE); add_wait_queue(&to_check->sleep, &wait); snd_pcm_stream_unlock_irq(substream); if (runtime->no_period_wakeup) @@ -1885,7 +1886,7 @@ static int snd_pcm_drain(struct snd_pcm_substream *substream, } tout = msecs_to_jiffies(tout * 1000); } - tout = schedule_timeout_interruptible(tout); + tout = schedule_timeout(tout); snd_pcm_stream_lock_irq(substream); group = snd_pcm_stream_group_ref(substream); -- cgit From e1ab2431ebee2634b9868013d3fefd03c800e510 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 09:25:03 -0500 Subject: arcnet: com20020-isa: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/net/arcnet/com20020-isa.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 205:13, 203:10, 209:7, 201:11, 207:8 Reported-by: Geert Uytterhoeven Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Signed-off-by: David S. Miller --- drivers/net/arcnet/com20020-isa.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/arcnet/com20020-isa.c b/drivers/net/arcnet/com20020-isa.c index 28510e33924f..cd27fdc1059b 100644 --- a/drivers/net/arcnet/com20020-isa.c +++ b/drivers/net/arcnet/com20020-isa.c @@ -197,16 +197,22 @@ static int __init com20020isa_setup(char *s) switch (ints[0]) { default: /* ERROR */ pr_info("Too many arguments\n"); + /* Fall through */ case 6: /* Timeout */ timeout = ints[6]; + /* Fall through */ case 5: /* CKP value */ clockp = ints[5]; + /* Fall through */ case 4: /* Backplane flag */ backplane = ints[4]; + /* Fall through */ case 3: /* Node ID */ node = ints[3]; + /* Fall through */ case 2: /* IRQ */ irq = ints[2]; + /* Fall through */ case 1: /* IO address */ io = ints[1]; } -- cgit From 05bba1edaf9c11023901800bc4d2ce5b96e0836a Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 09:59:47 -0500 Subject: net/af_iucv: mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: net/iucv/af_iucv.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 537:3, 519:6, 2246:6, 510:6 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: Geert Uytterhoeven Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Signed-off-by: David S. Miller --- net/iucv/af_iucv.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 09e1694b6d34..ebb62a4ebe30 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -512,7 +512,9 @@ static void iucv_sock_close(struct sock *sk) sk->sk_state = IUCV_DISCONN; sk->sk_state_change(sk); } - case IUCV_DISCONN: /* fall through */ + /* fall through */ + + case IUCV_DISCONN: sk->sk_state = IUCV_CLOSING; sk->sk_state_change(sk); @@ -525,8 +527,9 @@ static void iucv_sock_close(struct sock *sk) iucv_sock_in_state(sk, IUCV_CLOSED, 0), timeo); } + /* fall through */ - case IUCV_CLOSING: /* fall through */ + case IUCV_CLOSING: sk->sk_state = IUCV_CLOSED; sk->sk_state_change(sk); @@ -535,8 +538,9 @@ static void iucv_sock_close(struct sock *sk) skb_queue_purge(&iucv->send_skb_q); skb_queue_purge(&iucv->backlog_skb_q); + /* fall through */ - default: /* fall through */ + default: iucv_sever_path(sk, 1); } @@ -2247,10 +2251,10 @@ static int afiucv_hs_rcv(struct sk_buff *skb, struct net_device *dev, kfree_skb(skb); break; } - /* fall through and receive non-zero length data */ + /* fall through - and receive non-zero length data */ case (AF_IUCV_FLAG_SHT): /* shutdown request */ - /* fall through and receive zero length data */ + /* fall through - and receive zero length data */ case 0: /* plain data frame */ IUCV_SKB_CB(skb)->class = trans_hdr->iucv_hdr.class; -- cgit From 708637e65abd487ebb75fb55401c36a466c3135b Mon Sep 17 00:00:00 2001 From: Bernard Metzler Date: Sat, 27 Jul 2019 12:38:32 +0200 Subject: Do not dereference 'siw_crypto_shash' before checking Reported-by: "Dan Carpenter" Fixes: f29dd55b0236 ("rdma/siw: queue pair methods") Link: https://lore.kernel.org/r/OF61E386ED.49A73798-ON00258444.003BD6A6-00258444.003CC8D9@notes.na.collabserv.com Signed-off-by: Bernard Metzler Signed-off-by: Doug Ledford --- drivers/infiniband/sw/siw/siw_qp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/sw/siw/siw_qp.c b/drivers/infiniband/sw/siw/siw_qp.c index 11383d9f95ef..e27bd5b35b96 100644 --- a/drivers/infiniband/sw/siw/siw_qp.c +++ b/drivers/infiniband/sw/siw/siw_qp.c @@ -220,12 +220,14 @@ static int siw_qp_enable_crc(struct siw_qp *qp) { struct siw_rx_stream *c_rx = &qp->rx_stream; struct siw_iwarp_tx *c_tx = &qp->tx_ctx; - int size = crypto_shash_descsize(siw_crypto_shash) + - sizeof(struct shash_desc); + int size; if (siw_crypto_shash == NULL) return -ENOENT; + size = crypto_shash_descsize(siw_crypto_shash) + + sizeof(struct shash_desc); + c_tx->mpa_crc_hd = kzalloc(size, GFP_KERNEL); c_rx->mpa_crc_hd = kzalloc(size, GFP_KERNEL); if (!c_tx->mpa_crc_hd || !c_rx->mpa_crc_hd) { -- cgit From 195b2919ccd7ffcaf6b6bbcb39444a53ab8308c7 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 27 Jul 2019 21:21:37 +0200 Subject: net: stmmac: manage errors returned by of_get_mac_address() Commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") added support for reading the MAC address from an nvmem-cell. This required changing the logic to return an error pointer upon failure. If stmmac is loaded before the nvmem provider driver then of_get_mac_address() return an error pointer with -EPROBE_DEFER. Propagate this error so the stmmac driver will be probed again after the nvmem provider driver is loaded. Default to a random generated MAC address in case of any other error, instead of using the error pointer as MAC address. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 73fc2524372e..154daf4d1072 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -370,6 +370,13 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) return ERR_PTR(-ENOMEM); *mac = of_get_mac_address(np); + if (IS_ERR(*mac)) { + if (PTR_ERR(*mac) == -EPROBE_DEFER) + return ERR_CAST(*mac); + + *mac = NULL; + } + plat->interface = of_get_phy_mode(np); /* Some wrapper drivers still rely on phy_node. Let's save it while -- cgit From 011f175428d46461f94a65dacb9a416529d08dda Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sun, 28 Jul 2019 00:37:26 +0100 Subject: rocker: fix memory leaks of fib_work on two error return paths Currently there are two error return paths that leak memory allocated to fib_work. Fix this by kfree'ing fib_work before returning. Addresses-Coverity: ("Resource leak") Fixes: 19a9d136f198 ("ipv4: Flag fib_info with a fib_nh using IPv6 gateway") Fixes: dbcc4fa718ee ("rocker: Fail attempts to use routes with nexthop objects") Signed-off-by: Colin Ian King Reviewed-by: David Ahern Acked-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/rocker/rocker_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/rocker/rocker_main.c b/drivers/net/ethernet/rocker/rocker_main.c index 079f459c73a5..2c5d3f5b84dd 100644 --- a/drivers/net/ethernet/rocker/rocker_main.c +++ b/drivers/net/ethernet/rocker/rocker_main.c @@ -2208,10 +2208,12 @@ static int rocker_router_fib_event(struct notifier_block *nb, if (fen_info->fi->fib_nh_is_v6) { NL_SET_ERR_MSG_MOD(info->extack, "IPv6 gateway with IPv4 route is not supported"); + kfree(fib_work); return notifier_from_errno(-EINVAL); } if (fen_info->fi->nh) { NL_SET_ERR_MSG_MOD(info->extack, "IPv4 route with nexthop objects is not supported"); + kfree(fib_work); return notifier_from_errno(-EINVAL); } } -- cgit From 230bd958c2c846ee292aa38bc6b006296c24ca01 Mon Sep 17 00:00:00 2001 From: Matteo Croce Date: Sun, 28 Jul 2019 02:46:45 +0200 Subject: mvpp2: refactor MTU change code The MTU change code can call napi_disable() with the device already down, leading to a deadlock. Also, lot of code is duplicated unnecessarily. Rework mvpp2_change_mtu() to avoid the deadlock and remove duplicated code. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Matteo Croce Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 41 ++++++++----------------- 1 file changed, 13 insertions(+), 28 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index b6591ea0c6d6..68fa2d563f0d 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -3700,6 +3700,7 @@ static int mvpp2_set_mac_address(struct net_device *dev, void *p) static int mvpp2_change_mtu(struct net_device *dev, int mtu) { struct mvpp2_port *port = netdev_priv(dev); + bool running = netif_running(dev); int err; if (!IS_ALIGNED(MVPP2_RX_PKT_SIZE(mtu), 8)) { @@ -3708,40 +3709,24 @@ static int mvpp2_change_mtu(struct net_device *dev, int mtu) mtu = ALIGN(MVPP2_RX_PKT_SIZE(mtu), 8); } - if (!netif_running(dev)) { - err = mvpp2_bm_update_mtu(dev, mtu); - if (!err) { - port->pkt_size = MVPP2_RX_PKT_SIZE(mtu); - return 0; - } - - /* Reconfigure BM to the original MTU */ - err = mvpp2_bm_update_mtu(dev, dev->mtu); - if (err) - goto log_error; - } - - mvpp2_stop_dev(port); + if (running) + mvpp2_stop_dev(port); err = mvpp2_bm_update_mtu(dev, mtu); - if (!err) { + if (err) { + netdev_err(dev, "failed to change MTU\n"); + /* Reconfigure BM to the original MTU */ + mvpp2_bm_update_mtu(dev, dev->mtu); + } else { port->pkt_size = MVPP2_RX_PKT_SIZE(mtu); - goto out_start; } - /* Reconfigure BM to the original MTU */ - err = mvpp2_bm_update_mtu(dev, dev->mtu); - if (err) - goto log_error; - -out_start: - mvpp2_start_dev(port); - mvpp2_egress_enable(port); - mvpp2_ingress_enable(port); + if (running) { + mvpp2_start_dev(port); + mvpp2_egress_enable(port); + mvpp2_ingress_enable(port); + } - return 0; -log_error: - netdev_err(dev, "failed to change MTU\n"); return err; } -- cgit From 55b40dbf0e76b4bfb9d8b3a16a0208640a9a45df Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Sun, 28 Jul 2019 14:56:36 +0200 Subject: net: fix ifindex collision during namespace removal Commit aca51397d014 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.") introduced a possibility to hit a BUG in case device is returning back to init_net and two following conditions are met: 1) dev->ifindex value is used in a name of another "dev%d" device in init_net. 2) dev->name is used by another device in init_net. Under real life circumstances this is hard to get. Therefore this has been present happily for over 10 years. To reproduce: $ ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: dummy0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff 3: enp0s2: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff $ ip netns add ns1 $ ip -n ns1 link add dummy1ns1 type dummy $ ip -n ns1 link add dummy2ns1 type dummy $ ip link set enp0s2 netns ns1 $ ip -n ns1 link set enp0s2 name dummy0 [ 100.858894] virtio_net virtio0 dummy0: renamed from enp0s2 $ ip link add dev4 type dummy $ ip -n ns1 a 1: lo: mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy1ns1: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 16:63:4c:38:3e:ff brd ff:ff:ff:ff:ff:ff 3: dummy2ns1: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether aa:9e:86:dd:6b:5d brd ff:ff:ff:ff:ff:ff 4: dummy0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff $ ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: dummy0: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff 4: dev4: mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 5a:e1:4a:b6:ec:f8 brd ff:ff:ff:ff:ff:ff $ ip netns del ns1 [ 158.717795] default_device_exit: failed to move dummy0 to init_net: -17 [ 158.719316] ------------[ cut here ]------------ [ 158.720591] kernel BUG at net/core/dev.c:9824! [ 158.722260] invalid opcode: 0000 [#1] SMP KASAN PTI [ 158.723728] CPU: 0 PID: 56 Comm: kworker/u2:1 Not tainted 5.3.0-rc1+ #18 [ 158.725422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 [ 158.727508] Workqueue: netns cleanup_net [ 158.728915] RIP: 0010:default_device_exit.cold+0x1d/0x1f [ 158.730683] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e [ 158.736854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282 [ 158.738752] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000 [ 158.741369] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64 [ 158.743418] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c [ 158.745626] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000 [ 158.748405] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72 [ 158.750638] FS: 0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000 [ 158.752944] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 158.755245] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0 [ 158.757654] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 158.760012] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 158.762758] Call Trace: [ 158.763882] ? dev_change_net_namespace+0xbb0/0xbb0 [ 158.766148] ? devlink_nl_cmd_set_doit+0x520/0x520 [ 158.768034] ? dev_change_net_namespace+0xbb0/0xbb0 [ 158.769870] ops_exit_list.isra.0+0xa8/0x150 [ 158.771544] cleanup_net+0x446/0x8f0 [ 158.772945] ? unregister_pernet_operations+0x4a0/0x4a0 [ 158.775294] process_one_work+0xa1a/0x1740 [ 158.776896] ? pwq_dec_nr_in_flight+0x310/0x310 [ 158.779143] ? do_raw_spin_lock+0x11b/0x280 [ 158.780848] worker_thread+0x9e/0x1060 [ 158.782500] ? process_one_work+0x1740/0x1740 [ 158.784454] kthread+0x31b/0x420 [ 158.786082] ? __kthread_create_on_node+0x3f0/0x3f0 [ 158.788286] ret_from_fork+0x3a/0x50 [ 158.789871] ---[ end trace defd6c657c71f936 ]--- [ 158.792273] RIP: 0010:default_device_exit.cold+0x1d/0x1f [ 158.795478] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e [ 158.804854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282 [ 158.807865] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000 [ 158.811794] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64 [ 158.816652] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c [ 158.820930] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000 [ 158.825113] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72 [ 158.829899] FS: 0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000 [ 158.834923] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 158.838164] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0 [ 158.841917] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 158.845149] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fix this by checking if a device with the same name exists in init_net and fallback to original code - dev%d to allocate name - in case it does. This was found using syzkaller. Fixes: aca51397d014 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.") Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- net/core/dev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/core/dev.c b/net/core/dev.c index fc676b2610e3..2f341b850845 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -9701,6 +9701,8 @@ static void __net_exit default_device_exit(struct net *net) /* Push remaining network devices to init_net */ snprintf(fb_name, IFNAMSIZ, "dev%d", dev->ifindex); + if (__dev_get_by_name(&init_net, fb_name)) + snprintf(fb_name, IFNAMSIZ, "dev%%d"); err = dev_change_net_namespace(dev, &init_net, fb_name); if (err) { pr_emerg("%s: failed to move %s to init_net: %d\n", -- cgit From d66503c43c0036d8db526d6c47c149bb971ac0b9 Mon Sep 17 00:00:00 2001 From: Matteo Croce Date: Sun, 28 Jul 2019 19:35:49 +0200 Subject: mvpp2: refactor the HW checksum setup The hardware can only offload checksum calculation on first port due to the Tx FIFO size limitation, and has a maximum L3 offset of 128 bytes. Document this in a comment and move duplicated code in a function. Fixes: 576193f2d579 ("net: mvpp2: jumbo frames support") Signed-off-by: Matteo Croce Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 35 ++++++++++++++++--------- 1 file changed, 22 insertions(+), 13 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index 68fa2d563f0d..e2e61a4a9000 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -811,6 +811,26 @@ static int mvpp2_swf_bm_pool_init(struct mvpp2_port *port) return 0; } +static void mvpp2_set_hw_csum(struct mvpp2_port *port, + enum mvpp2_bm_pool_log_num new_long_pool) +{ + const netdev_features_t csums = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; + + /* Update L4 checksum when jumbo enable/disable on port. + * Only port 0 supports hardware checksum offload due to + * the Tx FIFO size limitation. + * Also, don't set NETIF_F_HW_CSUM because L3_offset in TX descriptor + * has 7 bits, so the maximum L3 offset is 128. + */ + if (new_long_pool == MVPP2_BM_JUMBO && port->id != 0) { + port->dev->features &= ~csums; + port->dev->hw_features &= ~csums; + } else { + port->dev->features |= csums; + port->dev->hw_features |= csums; + } +} + static int mvpp2_bm_update_mtu(struct net_device *dev, int mtu) { struct mvpp2_port *port = netdev_priv(dev); @@ -843,15 +863,7 @@ static int mvpp2_bm_update_mtu(struct net_device *dev, int mtu) /* Add port to new short & long pool */ mvpp2_swf_bm_pool_init(port); - /* Update L4 checksum when jumbo enable/disable on port */ - if (new_long_pool == MVPP2_BM_JUMBO && port->id != 0) { - dev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM); - dev->hw_features &= ~(NETIF_F_IP_CSUM | - NETIF_F_IPV6_CSUM); - } else { - dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; - dev->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; - } + mvpp2_set_hw_csum(port, new_long_pool); } dev->mtu = mtu; @@ -5193,10 +5205,7 @@ static int mvpp2_port_probe(struct platform_device *pdev, dev->features |= NETIF_F_NTUPLE; } - if (port->pool_long->id == MVPP2_BM_JUMBO && port->id != 0) { - dev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM); - dev->hw_features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM); - } + mvpp2_set_hw_csum(port, port->pool_long->id); dev->vlan_features |= features; dev->gso_max_segs = MVPP2_MAX_TSO_SEGS; -- cgit From 6f315c42d4120303d4cd6520f67889ff7f42736e Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sun, 28 Jul 2019 19:30:09 -0500 Subject: net: ehea: Mark expected switch fall-through Mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/ibm/ehea/ehea_main.c: In function 'ehea_mem_notifier': include/linux/printk.h:311:2: warning: this statement may fall through [-Wimplicit-fallthrough=] printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/ibm/ehea/ehea_main.c:3253:3: note: in expansion of macro 'pr_info' pr_info("memory offlining canceled"); ^~~~~~~ drivers/net/ethernet/ibm/ehea/ehea_main.c:3256:2: note: here case MEM_ONLINE: ^~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: Stephen Rothwell Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 4138a8480347..cca71ba7a74a 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -3251,7 +3251,7 @@ static int ehea_mem_notifier(struct notifier_block *nb, switch (action) { case MEM_CANCEL_OFFLINE: pr_info("memory offlining canceled"); - /* Fall through: re-add canceled memory block */ + /* Fall through - re-add canceled memory block */ case MEM_ONLINE: pr_info("memory is going online"); -- cgit From 52023a53993061b524f6ba1de68858c472f52aad Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sun, 28 Jul 2019 19:32:51 -0500 Subject: net: spider_net: Mark expected switch fall-through Mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/toshiba/spider_net.c: In function 'spider_net_release_tx_chain': drivers/net/ethernet/toshiba/spider_net.c:783:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (!brutal) { ^ drivers/net/ethernet/toshiba/spider_net.c:792:3: note: here case SPIDER_NET_DESCR_RESPONSE_ERROR: ^~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: Stephen Rothwell Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Signed-off-by: David S. Miller --- drivers/net/ethernet/toshiba/spider_net.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/toshiba/spider_net.c b/drivers/net/ethernet/toshiba/spider_net.c index 5b196ebfed49..0f346761a2b2 100644 --- a/drivers/net/ethernet/toshiba/spider_net.c +++ b/drivers/net/ethernet/toshiba/spider_net.c @@ -788,6 +788,7 @@ spider_net_release_tx_chain(struct spider_net_card *card, int brutal) /* fallthrough, if we release the descriptors * brutally (then we don't care about * SPIDER_NET_DESCR_CARDOWNED) */ + /* Fall through */ case SPIDER_NET_DESCR_RESPONSE_ERROR: case SPIDER_NET_DESCR_PROTECTION_ERROR: -- cgit From b89d15480d0cacacae1a0fe0b3da01b529f2914f Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Mon, 24 Jun 2019 15:20:11 +0200 Subject: netfilter: ipset: Actually allow destination MAC address for hash:ip,mac sets too In commit 8cc4ccf58379 ("ipset: Allow matching on destination MAC address for mac and ipmac sets"), ipset.git commit 1543514c46a7, I removed the KADT check that prevents matching on destination MAC addresses for hash:mac sets, but forgot to remove the same check for hash:ip,mac set. Drop this check: functionality is now commented in man pages and there's no reason to restrict to source MAC address matching anymore. Reported-by: Chen Yi Fixes: 8cc4ccf58379 ("ipset: Allow matching on destination MAC address for mac and ipmac sets") Signed-off-by: Stefano Brivio Signed-off-by: Jozsef Kadlecsik --- net/netfilter/ipset/ip_set_hash_ipmac.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/net/netfilter/ipset/ip_set_hash_ipmac.c b/net/netfilter/ipset/ip_set_hash_ipmac.c index faf59b6a998f..eb1443408320 100644 --- a/net/netfilter/ipset/ip_set_hash_ipmac.c +++ b/net/netfilter/ipset/ip_set_hash_ipmac.c @@ -89,10 +89,6 @@ hash_ipmac4_kadt(struct ip_set *set, const struct sk_buff *skb, struct hash_ipmac4_elem e = { .ip = 0, { .foo[0] = 0, .foo[1] = 0 } }; struct ip_set_ext ext = IP_SET_INIT_KEXT(skb, opt, set); - /* MAC can be src only */ - if (!(opt->flags & IPSET_DIM_TWO_SRC)) - return 0; - if (skb_mac_header(skb) < skb->head || (skb_mac_header(skb) + ETH_HLEN) > skb->data) return -EINVAL; -- cgit From 1b4a75108d5bc153daf965d334e77e8e94534f96 Mon Sep 17 00:00:00 2001 From: Stefano Brivio Date: Mon, 24 Jun 2019 15:20:12 +0200 Subject: netfilter: ipset: Copy the right MAC address in bitmap:ip,mac and hash:ip,mac sets In commit 8cc4ccf58379 ("ipset: Allow matching on destination MAC address for mac and ipmac sets"), ipset.git commit 1543514c46a7, I added to the KADT functions for sets matching on MAC addreses the copy of source or destination MAC address depending on the configured match. This was done correctly for hash:mac, but for hash:ip,mac and bitmap:ip,mac, copying and pasting the same code block presents an obvious problem: in these two set types, the MAC address is the second dimension, not the first one, and we are actually selecting the MAC address depending on whether the first dimension (IP address) specifies source or destination. Fix this by checking for the IPSET_DIM_TWO_SRC flag in option flags. This way, mixing source and destination matches for the two dimensions of ip,mac set types works as expected. With this setup: ip netns add A ip link add veth1 type veth peer name veth2 netns A ip addr add 192.0.2.1/24 dev veth1 ip -net A addr add 192.0.2.2/24 dev veth2 ip link set veth1 up ip -net A link set veth2 up dst=$(ip netns exec A cat /sys/class/net/veth2/address) ip netns exec A ipset create test_bitmap bitmap:ip,mac range 192.0.0.0/16 ip netns exec A ipset add test_bitmap 192.0.2.1,${dst} ip netns exec A iptables -A INPUT -m set ! --match-set test_bitmap src,dst -j DROP ip netns exec A ipset create test_hash hash:ip,mac ip netns exec A ipset add test_hash 192.0.2.1,${dst} ip netns exec A iptables -A INPUT -m set ! --match-set test_hash src,dst -j DROP ipset correctly matches a test packet: # ping -c1 192.0.2.2 >/dev/null # echo $? 0 Reported-by: Chen Yi Fixes: 8cc4ccf58379 ("ipset: Allow matching on destination MAC address for mac and ipmac sets") Signed-off-by: Stefano Brivio Signed-off-by: Jozsef Kadlecsik --- net/netfilter/ipset/ip_set_bitmap_ipmac.c | 2 +- net/netfilter/ipset/ip_set_hash_ipmac.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/ipset/ip_set_bitmap_ipmac.c b/net/netfilter/ipset/ip_set_bitmap_ipmac.c index ca7ac4a25ada..1d4e63326e68 100644 --- a/net/netfilter/ipset/ip_set_bitmap_ipmac.c +++ b/net/netfilter/ipset/ip_set_bitmap_ipmac.c @@ -226,7 +226,7 @@ bitmap_ipmac_kadt(struct ip_set *set, const struct sk_buff *skb, e.id = ip_to_id(map, ip); - if (opt->flags & IPSET_DIM_ONE_SRC) + if (opt->flags & IPSET_DIM_TWO_SRC) ether_addr_copy(e.ether, eth_hdr(skb)->h_source); else ether_addr_copy(e.ether, eth_hdr(skb)->h_dest); diff --git a/net/netfilter/ipset/ip_set_hash_ipmac.c b/net/netfilter/ipset/ip_set_hash_ipmac.c index eb1443408320..24d8f4df4230 100644 --- a/net/netfilter/ipset/ip_set_hash_ipmac.c +++ b/net/netfilter/ipset/ip_set_hash_ipmac.c @@ -93,7 +93,7 @@ hash_ipmac4_kadt(struct ip_set *set, const struct sk_buff *skb, (skb_mac_header(skb) + ETH_HLEN) > skb->data) return -EINVAL; - if (opt->flags & IPSET_DIM_ONE_SRC) + if (opt->flags & IPSET_DIM_TWO_SRC) ether_addr_copy(e.ether, eth_hdr(skb)->h_source); else ether_addr_copy(e.ether, eth_hdr(skb)->h_dest); -- cgit From 6c1f7e2c1b96ab9b09ac97c4df2bd9dc327206f6 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Tue, 23 Jul 2019 10:25:55 +0200 Subject: netfilter: ipset: Fix rename concurrency with listing Shijie Luo reported that when stress-testing ipset with multiple concurrent create, rename, flush, list, destroy commands, it can result ipset : Broken LIST kernel message: missing DATA part! error messages and broken list results. The problem was the rename operation was not properly handled with respect of listing. The patch fixes the issue. Reported-by: Shijie Luo Signed-off-by: Jozsef Kadlecsik --- net/netfilter/ipset/ip_set_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c index 2e151856ad99..e64d5f9a89dd 100644 --- a/net/netfilter/ipset/ip_set_core.c +++ b/net/netfilter/ipset/ip_set_core.c @@ -1161,7 +1161,7 @@ static int ip_set_rename(struct net *net, struct sock *ctnl, return -ENOENT; write_lock_bh(&ip_set_ref_lock); - if (set->ref != 0) { + if (set->ref != 0 || set->ref_netlink != 0) { ret = -IPSET_ERR_REFERENCED; goto out; } -- cgit From c6b36bdd04b5c22b2705f7ae561d4f3b4d8a0ac3 Mon Sep 17 00:00:00 2001 From: Petr Machata Date: Mon, 29 Jul 2019 18:26:14 +0000 Subject: mlxsw: spectrum_ptp: Increase parsing depth when PTP is enabled Spectrum systems have a configurable limit on how far into the packet they parse. By default, the limit is 96 bytes. An IPv6 PTP packet is layered as Ethernet/IPv6/UDP (14+40+8 bytes), and sequence ID of a PTP event is only available 32 bytes into payload, for a total of 94 bytes. When an additional 802.1q header is present as well (such as when ptp4l is running on a VLAN port), the parsing limit is exceeded. Such packets are not recognized as PTP, and are not timestamped. Therefore generalize the current VXLAN-specific parsing depth setting to allow reference-counted requests from other modules as well. Keep it in the VXLAN module, because the MPRS register also configures UDP destination port number used for VXLAN, and is thus closely tied to the VXLAN code anyway. Then invoke the new interfaces from both VXLAN (in obvious places), as well as from PTP code, when the (global) timestamping configuration changes from disabled to enabled or vice versa. Fixes: 8748642751ed ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Signed-off-by: Petr Machata Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 4 ++ drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c | 1 + drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.h | 1 + .../ethernet/mellanox/mlxsw/spectrum_nve_vxlan.c | 76 +++++++++++++++++----- drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c | 17 +++++ 5 files changed, 82 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h index 131f62ce9297..6664119fb0c8 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h @@ -951,4 +951,8 @@ void mlxsw_sp_port_nve_fini(struct mlxsw_sp_port *mlxsw_sp_port); int mlxsw_sp_nve_init(struct mlxsw_sp *mlxsw_sp); void mlxsw_sp_nve_fini(struct mlxsw_sp *mlxsw_sp); +/* spectrum_nve_vxlan.c */ +int mlxsw_sp_nve_inc_parsing_depth_get(struct mlxsw_sp *mlxsw_sp); +void mlxsw_sp_nve_inc_parsing_depth_put(struct mlxsw_sp *mlxsw_sp); + #endif diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c index 1df164a4b06d..17f334b46c40 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.c @@ -775,6 +775,7 @@ static void mlxsw_sp_nve_tunnel_fini(struct mlxsw_sp *mlxsw_sp) ops->fini(nve); mlxsw_sp_kvdl_free(mlxsw_sp, MLXSW_SP_KVDL_ENTRY_TYPE_ADJ, 1, nve->tunnel_index); + memset(&nve->config, 0, sizeof(nve->config)); } nve->num_nve_tunnels--; } diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.h index 0035640156a1..12f664f42f21 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.h +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve.h @@ -29,6 +29,7 @@ struct mlxsw_sp_nve { unsigned int num_max_mc_entries[MLXSW_SP_L3_PROTO_MAX]; u32 tunnel_index; u16 ul_rif_index; /* Reserved for Spectrum */ + unsigned int inc_parsing_depth_refs; }; struct mlxsw_sp_nve_ops { diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve_vxlan.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve_vxlan.c index 93ccd9fc2266..05517c7feaa5 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve_vxlan.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_nve_vxlan.c @@ -103,9 +103,9 @@ static void mlxsw_sp_nve_vxlan_config(const struct mlxsw_sp_nve *nve, config->udp_dport = cfg->dst_port; } -static int mlxsw_sp_nve_parsing_set(struct mlxsw_sp *mlxsw_sp, - unsigned int parsing_depth, - __be16 udp_dport) +static int __mlxsw_sp_nve_parsing_set(struct mlxsw_sp *mlxsw_sp, + unsigned int parsing_depth, + __be16 udp_dport) { char mprs_pl[MLXSW_REG_MPRS_LEN]; @@ -113,6 +113,56 @@ static int mlxsw_sp_nve_parsing_set(struct mlxsw_sp *mlxsw_sp, return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(mprs), mprs_pl); } +static int mlxsw_sp_nve_parsing_set(struct mlxsw_sp *mlxsw_sp, + __be16 udp_dport) +{ + int parsing_depth = mlxsw_sp->nve->inc_parsing_depth_refs ? + MLXSW_SP_NVE_VXLAN_PARSING_DEPTH : + MLXSW_SP_NVE_DEFAULT_PARSING_DEPTH; + + return __mlxsw_sp_nve_parsing_set(mlxsw_sp, parsing_depth, udp_dport); +} + +static int +__mlxsw_sp_nve_inc_parsing_depth_get(struct mlxsw_sp *mlxsw_sp, + __be16 udp_dport) +{ + int err; + + mlxsw_sp->nve->inc_parsing_depth_refs++; + + err = mlxsw_sp_nve_parsing_set(mlxsw_sp, udp_dport); + if (err) + goto err_nve_parsing_set; + return 0; + +err_nve_parsing_set: + mlxsw_sp->nve->inc_parsing_depth_refs--; + return err; +} + +static void +__mlxsw_sp_nve_inc_parsing_depth_put(struct mlxsw_sp *mlxsw_sp, + __be16 udp_dport) +{ + mlxsw_sp->nve->inc_parsing_depth_refs--; + mlxsw_sp_nve_parsing_set(mlxsw_sp, udp_dport); +} + +int mlxsw_sp_nve_inc_parsing_depth_get(struct mlxsw_sp *mlxsw_sp) +{ + __be16 udp_dport = mlxsw_sp->nve->config.udp_dport; + + return __mlxsw_sp_nve_inc_parsing_depth_get(mlxsw_sp, udp_dport); +} + +void mlxsw_sp_nve_inc_parsing_depth_put(struct mlxsw_sp *mlxsw_sp) +{ + __be16 udp_dport = mlxsw_sp->nve->config.udp_dport; + + __mlxsw_sp_nve_inc_parsing_depth_put(mlxsw_sp, udp_dport); +} + static void mlxsw_sp_nve_vxlan_config_prepare(char *tngcr_pl, const struct mlxsw_sp_nve_config *config) @@ -176,9 +226,7 @@ static int mlxsw_sp1_nve_vxlan_init(struct mlxsw_sp_nve *nve, struct mlxsw_sp *mlxsw_sp = nve->mlxsw_sp; int err; - err = mlxsw_sp_nve_parsing_set(mlxsw_sp, - MLXSW_SP_NVE_VXLAN_PARSING_DEPTH, - config->udp_dport); + err = __mlxsw_sp_nve_inc_parsing_depth_get(mlxsw_sp, config->udp_dport); if (err) return err; @@ -203,8 +251,7 @@ err_promote_decap: err_rtdp_set: mlxsw_sp1_nve_vxlan_config_clear(mlxsw_sp); err_config_set: - mlxsw_sp_nve_parsing_set(mlxsw_sp, MLXSW_SP_NVE_DEFAULT_PARSING_DEPTH, - config->udp_dport); + __mlxsw_sp_nve_inc_parsing_depth_put(mlxsw_sp, 0); return err; } @@ -216,8 +263,7 @@ static void mlxsw_sp1_nve_vxlan_fini(struct mlxsw_sp_nve *nve) mlxsw_sp_router_nve_demote_decap(mlxsw_sp, config->ul_tb_id, config->ul_proto, &config->ul_sip); mlxsw_sp1_nve_vxlan_config_clear(mlxsw_sp); - mlxsw_sp_nve_parsing_set(mlxsw_sp, MLXSW_SP_NVE_DEFAULT_PARSING_DEPTH, - config->udp_dport); + __mlxsw_sp_nve_inc_parsing_depth_put(mlxsw_sp, 0); } static int @@ -320,9 +366,7 @@ static int mlxsw_sp2_nve_vxlan_init(struct mlxsw_sp_nve *nve, struct mlxsw_sp *mlxsw_sp = nve->mlxsw_sp; int err; - err = mlxsw_sp_nve_parsing_set(mlxsw_sp, - MLXSW_SP_NVE_VXLAN_PARSING_DEPTH, - config->udp_dport); + err = __mlxsw_sp_nve_inc_parsing_depth_get(mlxsw_sp, config->udp_dport); if (err) return err; @@ -348,8 +392,7 @@ err_promote_decap: err_rtdp_set: mlxsw_sp2_nve_vxlan_config_clear(mlxsw_sp); err_config_set: - mlxsw_sp_nve_parsing_set(mlxsw_sp, MLXSW_SP_NVE_DEFAULT_PARSING_DEPTH, - config->udp_dport); + __mlxsw_sp_nve_inc_parsing_depth_put(mlxsw_sp, 0); return err; } @@ -361,8 +404,7 @@ static void mlxsw_sp2_nve_vxlan_fini(struct mlxsw_sp_nve *nve) mlxsw_sp_router_nve_demote_decap(mlxsw_sp, config->ul_tb_id, config->ul_proto, &config->ul_sip); mlxsw_sp2_nve_vxlan_config_clear(mlxsw_sp); - mlxsw_sp_nve_parsing_set(mlxsw_sp, MLXSW_SP_NVE_DEFAULT_PARSING_DEPTH, - config->udp_dport); + __mlxsw_sp_nve_inc_parsing_depth_put(mlxsw_sp, 0); } const struct mlxsw_sp_nve_ops mlxsw_sp2_nve_vxlan_ops = { diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c index bd9c2bc2d5d6..98c5ba3200bc 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c @@ -979,6 +979,9 @@ static int mlxsw_sp1_ptp_mtpppc_update(struct mlxsw_sp_port *mlxsw_sp_port, { struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; struct mlxsw_sp_port *tmp; + u16 orig_ing_types = 0; + u16 orig_egr_types = 0; + int err; int i; /* MTPPPC configures timestamping globally, not per port. Find the @@ -986,12 +989,26 @@ static int mlxsw_sp1_ptp_mtpppc_update(struct mlxsw_sp_port *mlxsw_sp_port, */ for (i = 1; i < mlxsw_core_max_ports(mlxsw_sp->core); i++) { tmp = mlxsw_sp->ports[i]; + if (tmp) { + orig_ing_types |= tmp->ptp.ing_types; + orig_egr_types |= tmp->ptp.egr_types; + } if (tmp && tmp != mlxsw_sp_port) { ing_types |= tmp->ptp.ing_types; egr_types |= tmp->ptp.egr_types; } } + if ((ing_types || egr_types) && !(orig_egr_types || orig_egr_types)) { + err = mlxsw_sp_nve_inc_parsing_depth_get(mlxsw_sp); + if (err) { + netdev_err(mlxsw_sp_port->dev, "Failed to increase parsing depth"); + return err; + } + } + if (!(ing_types || egr_types) && (orig_egr_types || orig_egr_types)) + mlxsw_sp_nve_inc_parsing_depth_put(mlxsw_sp); + return mlxsw_sp1_ptp_mtpppc_set(mlxsw_sp_port->mlxsw_sp, ing_types, egr_types); } -- cgit From d4e575ba9fcc04d10c0a2e555a5b32fa3a8a19d3 Mon Sep 17 00:00:00 2001 From: Enrico Weigelt Date: Mon, 29 Jul 2019 20:55:21 +0200 Subject: net: sctp: drop unneeded likely() call around IS_ERR() IS_ERR() already calls unlikely(), so this extra unlikely() call around IS_ERR() is not needed. Signed-off-by: Enrico Weigelt Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- net/sctp/socket.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index aa80cda36581..9d1f83b10c0a 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -985,7 +985,7 @@ static int sctp_setsockopt_bindx(struct sock *sk, return -EINVAL; kaddrs = memdup_user(addrs, addrs_size); - if (unlikely(IS_ERR(kaddrs))) + if (IS_ERR(kaddrs)) return PTR_ERR(kaddrs); /* Walk through the addrs buffer and count the number of addresses. */ @@ -1315,7 +1315,7 @@ static int __sctp_setsockopt_connectx(struct sock *sk, return -EINVAL; kaddrs = memdup_user(addrs, addrs_size); - if (unlikely(IS_ERR(kaddrs))) + if (IS_ERR(kaddrs)) return PTR_ERR(kaddrs); /* Allow security module to validate connectx addresses. */ -- cgit From 0bc10ad3a42a1c8ef2cef6e158cc40b87c46352d Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 15:01:39 -0500 Subject: net: wan: sdla: Mark expected switch fall-through MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: i386): drivers/net/wan/sdla.c: In function ‘sdla_errors’: drivers/net/wan/sdla.c:414:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (cmd == SDLA_INFORMATION_WRITE) ^ drivers/net/wan/sdla.c:417:3: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva Signed-off-by: David S. Miller --- drivers/net/wan/sdla.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c index a9ac3f37b904..e2e679a01b65 100644 --- a/drivers/net/wan/sdla.c +++ b/drivers/net/wan/sdla.c @@ -413,6 +413,7 @@ static void sdla_errors(struct net_device *dev, int cmd, int dlci, int ret, int case SDLA_RET_NO_BUFS: if (cmd == SDLA_INFORMATION_WRITE) break; + /* Else, fall through */ default: netdev_dbg(dev, "Cmd 0x%02X generated return code 0x%02X\n", -- cgit From 7bd6ba4ef4b29db7464da496963081f5fdc88300 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 15:12:31 -0500 Subject: net: hamradio: baycom_epp: Mark expected switch fall-through MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: i386): drivers/net/hamradio/baycom_epp.c: In function ‘transmit’: drivers/net/hamradio/baycom_epp.c:491:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (i) { ^ drivers/net/hamradio/baycom_epp.c:504:3: note: here default: /* fall through */ ^~~~~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva Signed-off-by: David S. Miller --- drivers/net/hamradio/baycom_epp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index daab2c07d891..9303aeb2595f 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -500,8 +500,9 @@ static int transmit(struct baycom_state *bc, int cnt, unsigned char stat) } break; } + /* fall through */ - default: /* fall through */ + default: if (bc->hdlctx.calibrate <= 0) return 0; i = min_t(int, cnt, bc->hdlctx.calibrate); -- cgit From 7be21763f703d0f7e878283ec31e52b225097449 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 16:10:53 -0500 Subject: ataflop: Mark expected switch fall-through MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: m68k): drivers/block/ataflop.c: In function ‘fd_locked_ioctl’: drivers/block/ataflop.c:1728:3: warning: this statement may fall through [-Wimplicit-fallthrough=] set_capacity(floppy->disk, MAX_DISK_SIZE * 2); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/block/ataflop.c:1729:2: note: here case FDFMTEND: ^~~~ Signed-off-by: Gustavo A. R. Silva Signed-off-by: Jens Axboe --- drivers/block/ataflop.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c index 85f20e371f2f..bd7d3bb8b890 100644 --- a/drivers/block/ataflop.c +++ b/drivers/block/ataflop.c @@ -1726,6 +1726,7 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, /* MSch: invalidate default_params */ default_params[drive].blocks = 0; set_capacity(floppy->disk, MAX_DISK_SIZE * 2); + /* Fall through */ case FDFMTEND: case FDFLUSH: /* invalidate the buffer track to force a reread */ -- cgit From 8c4407de3be44c2a0ec3e316cd3e4a711bc2aaba Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Thu, 11 Jul 2019 22:24:57 +0800 Subject: pinctrl: aspeed: Make aspeed_pinmux_ips static Fix sparse warning: drivers/pinctrl/aspeed/pinmux-aspeed.c:8:12: warning: symbol 'aspeed_pinmux_ips' was not declared. Should it be static? Reported-by: Hulk Robot Signed-off-by: YueHaibing Link: https://lore.kernel.org/r/20190711142457.37028-1-yuehaibing@huawei.com Reviewed-by: Andrew Jeffery Signed-off-by: Linus Walleij --- drivers/pinctrl/aspeed/pinmux-aspeed.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/aspeed/pinmux-aspeed.c b/drivers/pinctrl/aspeed/pinmux-aspeed.c index 5b0fe178ccf2..839c01b7953f 100644 --- a/drivers/pinctrl/aspeed/pinmux-aspeed.c +++ b/drivers/pinctrl/aspeed/pinmux-aspeed.c @@ -5,7 +5,7 @@ #include "pinmux-aspeed.h" -const char *const aspeed_pinmux_ips[] = { +static const char *const aspeed_pinmux_ips[] = { [ASPEED_IP_SCU] = "SCU", [ASPEED_IP_GFX] = "GFX", [ASPEED_IP_LPC] = "LPC", -- cgit From 71d6c505b4d9e6f76586350450e785e3d452b346 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Mon, 29 Jul 2019 14:47:22 -0700 Subject: libata: zpodd: Fix small read overflow in zpodd_get_mech_type() Jeffrin reported a KASAN issue: BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70 Read of size 16 at addr ffffffff91f41f80 by task scsi_eh_1/149 ... The buggy address belongs to the variable: cdb.48319+0x0/0x40 Much like commit 18c9a99bce2a ("libata: zpodd: small read overflow in eject_tray()"), this fixes a cdb[] buffer length, this time in zpodd_get_mech_type(): We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes. Reported-by: Jeffrin Jose T Fixes: afe759511808c ("libata: identify and init ZPODD devices") Link: https://lore.kernel.org/lkml/201907181423.E808958@keescook/ Tested-by: Jeffrin Jose T Reviewed-by: Nick Desaulniers Signed-off-by: Kees Cook Signed-off-by: Jens Axboe --- drivers/ata/libata-zpodd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c index 173e6f2dd9af..eefda51f97d3 100644 --- a/drivers/ata/libata-zpodd.c +++ b/drivers/ata/libata-zpodd.c @@ -56,7 +56,7 @@ static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev) unsigned int ret; struct rm_feature_desc *desc; struct ata_taskfile tf; - static const char cdb[] = { GPCMD_GET_CONFIGURATION, + static const char cdb[ATAPI_CDB_LEN] = { GPCMD_GET_CONFIGURATION, 2, /* only 1 feature descriptor requested */ 0, 3, /* 3, removable medium feature */ 0, 0, 0,/* reserved */ -- cgit From a20961cc9493be46b5c4f565b925284a90c7864c Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 17:10:16 -0500 Subject: net: smc911x: Mark expected switch fall-through MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/net/ethernet/smsc/smc911x.c: In function ‘smc911x_phy_detect’: drivers/net/ethernet/smsc/smc911x.c:677:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (cfg & HW_CFG_EXT_PHY_DET_) { ^ drivers/net/ethernet/smsc/smc911x.c:715:3: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc911x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c index bd14803545de..8d88e4083456 100644 --- a/drivers/net/ethernet/smsc/smc911x.c +++ b/drivers/net/ethernet/smsc/smc911x.c @@ -712,6 +712,7 @@ static void smc911x_phy_detect(struct net_device *dev) /* Found an external PHY */ break; } + /* Else, fall through */ default: /* Internal media only */ SMC_GET_PHY_ID1(lp, 1, id1); -- cgit From f3e4ff28b8685d856f381ee6bcf88b6149a6db5b Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 24 Jul 2019 11:00:54 +0200 Subject: scsi: libfc: Whitespace cleanup in libfc.h No functional change. [mkp: typo] Signed-off-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- include/scsi/libfc.h | 52 ++++++++++++++++++++++++++-------------------------- 1 file changed, 26 insertions(+), 26 deletions(-) diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h index 2d64b53f947c..9b87e1a1c646 100644 --- a/include/scsi/libfc.h +++ b/include/scsi/libfc.h @@ -115,7 +115,7 @@ struct fc_disc_port { struct fc_lport *lp; struct list_head peers; struct work_struct rport_work; - u32 port_id; + u32 port_id; }; /** @@ -155,14 +155,14 @@ struct fc_rport_operations { */ struct fc_rport_libfc_priv { struct fc_lport *local_port; - enum fc_rport_state rp_state; + enum fc_rport_state rp_state; u16 flags; #define FC_RP_FLAGS_REC_SUPPORTED (1 << 0) #define FC_RP_FLAGS_RETRY (1 << 1) #define FC_RP_STARTED (1 << 2) #define FC_RP_FLAGS_CONF_REQ (1 << 3) - unsigned int e_d_tov; - unsigned int r_a_tov; + unsigned int e_d_tov; + unsigned int r_a_tov; }; /** @@ -191,24 +191,24 @@ struct fc_rport_priv { struct fc_lport *local_port; struct fc_rport *rport; struct kref kref; - enum fc_rport_state rp_state; + enum fc_rport_state rp_state; struct fc_rport_identifiers ids; u16 flags; - u16 max_seq; + u16 max_seq; u16 disc_id; u16 maxframe_size; - unsigned int retries; - unsigned int major_retries; - unsigned int e_d_tov; - unsigned int r_a_tov; - struct mutex rp_mutex; + unsigned int retries; + unsigned int major_retries; + unsigned int e_d_tov; + unsigned int r_a_tov; + struct mutex rp_mutex; struct delayed_work retry_work; - enum fc_rport_event event; + enum fc_rport_event event; struct fc_rport_operations *ops; - struct list_head peers; - struct work_struct event_work; + struct list_head peers; + struct work_struct event_work; u32 supported_classes; - u16 prli_count; + u16 prli_count; struct rcu_head rcu; u16 sp_features; u8 spp_type; @@ -618,12 +618,12 @@ struct libfc_function_template { * @disc_callback: Callback routine called when discovery completes */ struct fc_disc { - unsigned char retry_count; - unsigned char pending; - unsigned char requested; - unsigned short seq_count; - unsigned char buf_len; - u16 disc_id; + unsigned char retry_count; + unsigned char pending; + unsigned char requested; + unsigned short seq_count; + unsigned char buf_len; + u16 disc_id; struct list_head rports; void *priv; @@ -697,7 +697,7 @@ struct fc_lport { struct fc_rport_priv *ms_rdata; struct fc_rport_priv *ptp_rdata; void *scsi_priv; - struct fc_disc disc; + struct fc_disc disc; /* Virtual port information */ struct list_head vports; @@ -715,7 +715,7 @@ struct fc_lport { u8 retry_count; /* Fabric information */ - u32 port_id; + u32 port_id; u64 wwpn; u64 wwnn; unsigned int service_params; @@ -743,11 +743,11 @@ struct fc_lport { struct fc_ns_fts fcts; /* Miscellaneous */ - struct mutex lp_mutex; - struct list_head list; + struct mutex lp_mutex; + struct list_head list; struct delayed_work retry_work; void *prov[FC_FC4_PROV_SIZE]; - struct list_head lport_list; + struct list_head lport_list; }; /** -- cgit From 023358b136d490ca91735ac6490db3741af5a8bd Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 24 Jul 2019 11:00:55 +0200 Subject: scsi: fcoe: Embed fc_rport_priv in fcoe_rport structure Gcc-9 complains for a memset across pointer boundaries, which happens as the code tries to allocate a flexible array on the stack. Turns out we cannot do this without relying on gcc-isms, so with this patch we'll embed the fc_rport_priv structure into fcoe_rport, can use the normal 'container_of' outcast, and will only have to do a memset over one structure. Signed-off-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/fcoe/fcoe_ctlr.c | 51 +++++++++++++++++-------------------------- drivers/scsi/libfc/fc_rport.c | 5 ++++- include/scsi/libfcoe.h | 1 + 3 files changed, 25 insertions(+), 32 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index 1a85fe9e4b7b..fc32b5d76821 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -2005,7 +2005,7 @@ EXPORT_SYMBOL_GPL(fcoe_wwn_from_mac); */ static inline struct fcoe_rport *fcoe_ctlr_rport(struct fc_rport_priv *rdata) { - return (struct fcoe_rport *)(rdata + 1); + return container_of(rdata, struct fcoe_rport, rdata); } /** @@ -2269,7 +2269,7 @@ static void fcoe_ctlr_vn_start(struct fcoe_ctlr *fip) */ static int fcoe_ctlr_vn_parse(struct fcoe_ctlr *fip, struct sk_buff *skb, - struct fc_rport_priv *rdata) + struct fcoe_rport *frport) { struct fip_header *fiph; struct fip_desc *desc = NULL; @@ -2277,16 +2277,12 @@ static int fcoe_ctlr_vn_parse(struct fcoe_ctlr *fip, struct fip_wwn_desc *wwn = NULL; struct fip_vn_desc *vn = NULL; struct fip_size_desc *size = NULL; - struct fcoe_rport *frport; size_t rlen; size_t dlen; u32 desc_mask = 0; u32 dtype; u8 sub; - memset(rdata, 0, sizeof(*rdata) + sizeof(*frport)); - frport = fcoe_ctlr_rport(rdata); - fiph = (struct fip_header *)skb->data; frport->flags = ntohs(fiph->fip_flags); @@ -2349,15 +2345,17 @@ static int fcoe_ctlr_vn_parse(struct fcoe_ctlr *fip, if (dlen != sizeof(struct fip_wwn_desc)) goto len_err; wwn = (struct fip_wwn_desc *)desc; - rdata->ids.node_name = get_unaligned_be64(&wwn->fd_wwn); + frport->rdata.ids.node_name = + get_unaligned_be64(&wwn->fd_wwn); break; case FIP_DT_VN_ID: if (dlen != sizeof(struct fip_vn_desc)) goto len_err; vn = (struct fip_vn_desc *)desc; memcpy(frport->vn_mac, vn->fd_mac, ETH_ALEN); - rdata->ids.port_id = ntoh24(vn->fd_fc_id); - rdata->ids.port_name = get_unaligned_be64(&vn->fd_wwpn); + frport->rdata.ids.port_id = ntoh24(vn->fd_fc_id); + frport->rdata.ids.port_name = + get_unaligned_be64(&vn->fd_wwpn); break; case FIP_DT_FC4F: if (dlen != sizeof(struct fip_fc4_feat)) @@ -2738,10 +2736,7 @@ static int fcoe_ctlr_vn_recv(struct fcoe_ctlr *fip, struct sk_buff *skb) { struct fip_header *fiph; enum fip_vn2vn_subcode sub; - struct { - struct fc_rport_priv rdata; - struct fcoe_rport frport; - } buf; + struct fcoe_rport frport = { }; int rc, vlan_id = 0; fiph = (struct fip_header *)skb->data; @@ -2757,7 +2752,7 @@ static int fcoe_ctlr_vn_recv(struct fcoe_ctlr *fip, struct sk_buff *skb) goto drop; } - rc = fcoe_ctlr_vn_parse(fip, skb, &buf.rdata); + rc = fcoe_ctlr_vn_parse(fip, skb, &frport); if (rc) { LIBFCOE_FIP_DBG(fip, "vn_recv vn_parse error %d\n", rc); goto drop; @@ -2766,19 +2761,19 @@ static int fcoe_ctlr_vn_recv(struct fcoe_ctlr *fip, struct sk_buff *skb) mutex_lock(&fip->ctlr_mutex); switch (sub) { case FIP_SC_VN_PROBE_REQ: - fcoe_ctlr_vn_probe_req(fip, &buf.rdata); + fcoe_ctlr_vn_probe_req(fip, &frport.rdata); break; case FIP_SC_VN_PROBE_REP: - fcoe_ctlr_vn_probe_reply(fip, &buf.rdata); + fcoe_ctlr_vn_probe_reply(fip, &frport.rdata); break; case FIP_SC_VN_CLAIM_NOTIFY: - fcoe_ctlr_vn_claim_notify(fip, &buf.rdata); + fcoe_ctlr_vn_claim_notify(fip, &frport.rdata); break; case FIP_SC_VN_CLAIM_REP: - fcoe_ctlr_vn_claim_resp(fip, &buf.rdata); + fcoe_ctlr_vn_claim_resp(fip, &frport.rdata); break; case FIP_SC_VN_BEACON: - fcoe_ctlr_vn_beacon(fip, &buf.rdata); + fcoe_ctlr_vn_beacon(fip, &frport.rdata); break; default: LIBFCOE_FIP_DBG(fip, "vn_recv unknown subcode %d\n", sub); @@ -2802,22 +2797,18 @@ drop: */ static int fcoe_ctlr_vlan_parse(struct fcoe_ctlr *fip, struct sk_buff *skb, - struct fc_rport_priv *rdata) + struct fcoe_rport *frport) { struct fip_header *fiph; struct fip_desc *desc = NULL; struct fip_mac_desc *macd = NULL; struct fip_wwn_desc *wwn = NULL; - struct fcoe_rport *frport; size_t rlen; size_t dlen; u32 desc_mask = 0; u32 dtype; u8 sub; - memset(rdata, 0, sizeof(*rdata) + sizeof(*frport)); - frport = fcoe_ctlr_rport(rdata); - fiph = (struct fip_header *)skb->data; frport->flags = ntohs(fiph->fip_flags); @@ -2871,7 +2862,8 @@ static int fcoe_ctlr_vlan_parse(struct fcoe_ctlr *fip, if (dlen != sizeof(struct fip_wwn_desc)) goto len_err; wwn = (struct fip_wwn_desc *)desc; - rdata->ids.node_name = get_unaligned_be64(&wwn->fd_wwn); + frport->rdata.ids.node_name = + get_unaligned_be64(&wwn->fd_wwn); break; default: LIBFCOE_FIP_DBG(fip, "unexpected descriptor type %x " @@ -2982,22 +2974,19 @@ static int fcoe_ctlr_vlan_recv(struct fcoe_ctlr *fip, struct sk_buff *skb) { struct fip_header *fiph; enum fip_vlan_subcode sub; - struct { - struct fc_rport_priv rdata; - struct fcoe_rport frport; - } buf; + struct fcoe_rport frport = { }; int rc; fiph = (struct fip_header *)skb->data; sub = fiph->fip_subcode; - rc = fcoe_ctlr_vlan_parse(fip, skb, &buf.rdata); + rc = fcoe_ctlr_vlan_parse(fip, skb, &frport); if (rc) { LIBFCOE_FIP_DBG(fip, "vlan_recv vlan_parse error %d\n", rc); goto drop; } mutex_lock(&fip->ctlr_mutex); if (sub == FIP_SC_VL_REQ) - fcoe_ctlr_vlan_disc_reply(fip, &buf.rdata); + fcoe_ctlr_vlan_disc_reply(fip, &frport.rdata); mutex_unlock(&fip->ctlr_mutex); drop: diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c index e0f3852fdad1..da6e97d8dc3b 100644 --- a/drivers/scsi/libfc/fc_rport.c +++ b/drivers/scsi/libfc/fc_rport.c @@ -128,6 +128,7 @@ EXPORT_SYMBOL(fc_rport_lookup); struct fc_rport_priv *fc_rport_create(struct fc_lport *lport, u32 port_id) { struct fc_rport_priv *rdata; + size_t rport_priv_size = sizeof(*rdata); lockdep_assert_held(&lport->disc.disc_mutex); @@ -135,7 +136,9 @@ struct fc_rport_priv *fc_rport_create(struct fc_lport *lport, u32 port_id) if (rdata) return rdata; - rdata = kzalloc(sizeof(*rdata) + lport->rport_priv_size, GFP_KERNEL); + if (lport->rport_priv_size > 0) + rport_priv_size = lport->rport_priv_size; + rdata = kzalloc(rport_priv_size, GFP_KERNEL); if (!rdata) return NULL; diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h index dc14b52577f7..2568cb0627ec 100644 --- a/include/scsi/libfcoe.h +++ b/include/scsi/libfcoe.h @@ -229,6 +229,7 @@ struct fcoe_fcf { * @vn_mac: VN_Node assigned MAC address for data */ struct fcoe_rport { + struct fc_rport_priv rdata; unsigned long time; u16 fcoe_len; u16 flags; -- cgit From d478418703d6bcdd163d5d8127683c6c471539f0 Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Wed, 24 Jul 2019 11:00:56 +0200 Subject: scsi: fcoe: pass in fcoe_rport structure instead of fc_rport_priv Instead of using the generic 'fc_rport_priv' structure as argument and then having to painstakingly outcast this to fcoe_rport we should be passing the fcoe_rport structure itself and reduce complexity. Signed-off-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/fcoe/fcoe_ctlr.c | 99 ++++++++++++++++++++++--------------------- 1 file changed, 51 insertions(+), 48 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index fc32b5d76821..1791a393795d 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -2401,16 +2401,14 @@ static void fcoe_ctlr_vn_send_claim(struct fcoe_ctlr *fip) /** * fcoe_ctlr_vn_probe_req() - handle incoming VN2VN probe request. * @fip: The FCoE controller - * @rdata: parsed remote port with frport from the probe request + * @frport: parsed FCoE rport from the probe request * * Called with ctlr_mutex held. */ static void fcoe_ctlr_vn_probe_req(struct fcoe_ctlr *fip, - struct fc_rport_priv *rdata) + struct fcoe_rport *frport) { - struct fcoe_rport *frport = fcoe_ctlr_rport(rdata); - - if (rdata->ids.port_id != fip->port_id) + if (frport->rdata.ids.port_id != fip->port_id) return; switch (fip->state) { @@ -2430,7 +2428,7 @@ static void fcoe_ctlr_vn_probe_req(struct fcoe_ctlr *fip, * Probe's REC bit is not set. * If we don't reply, we will change our address. */ - if (fip->lp->wwpn > rdata->ids.port_name && + if (fip->lp->wwpn > frport->rdata.ids.port_name && !(frport->flags & FIP_FL_REC_OR_P2P)) { LIBFCOE_FIP_DBG(fip, "vn_probe_req: " "port_id collision\n"); @@ -2454,14 +2452,14 @@ static void fcoe_ctlr_vn_probe_req(struct fcoe_ctlr *fip, /** * fcoe_ctlr_vn_probe_reply() - handle incoming VN2VN probe reply. * @fip: The FCoE controller - * @rdata: parsed remote port with frport from the probe request + * @frport: parsed FCoE rport from the probe request * * Called with ctlr_mutex held. */ static void fcoe_ctlr_vn_probe_reply(struct fcoe_ctlr *fip, - struct fc_rport_priv *rdata) + struct fcoe_rport *frport) { - if (rdata->ids.port_id != fip->port_id) + if (frport->rdata.ids.port_id != fip->port_id) return; switch (fip->state) { case FIP_ST_VNMP_START: @@ -2484,11 +2482,11 @@ static void fcoe_ctlr_vn_probe_reply(struct fcoe_ctlr *fip, /** * fcoe_ctlr_vn_add() - Add a VN2VN entry to the list, based on a claim reply. * @fip: The FCoE controller - * @new: newly-parsed remote port with frport as a template for new rdata + * @new: newly-parsed FCoE rport as a template for new rdata * * Called with ctlr_mutex held. */ -static void fcoe_ctlr_vn_add(struct fcoe_ctlr *fip, struct fc_rport_priv *new) +static void fcoe_ctlr_vn_add(struct fcoe_ctlr *fip, struct fcoe_rport *new) { struct fc_lport *lport = fip->lp; struct fc_rport_priv *rdata; @@ -2496,7 +2494,7 @@ static void fcoe_ctlr_vn_add(struct fcoe_ctlr *fip, struct fc_rport_priv *new) struct fcoe_rport *frport; u32 port_id; - port_id = new->ids.port_id; + port_id = new->rdata.ids.port_id; if (port_id == fip->port_id) return; @@ -2513,22 +2511,28 @@ static void fcoe_ctlr_vn_add(struct fcoe_ctlr *fip, struct fc_rport_priv *new) rdata->disc_id = lport->disc.disc_id; ids = &rdata->ids; - if ((ids->port_name != -1 && ids->port_name != new->ids.port_name) || - (ids->node_name != -1 && ids->node_name != new->ids.node_name)) { + if ((ids->port_name != -1 && + ids->port_name != new->rdata.ids.port_name) || + (ids->node_name != -1 && + ids->node_name != new->rdata.ids.node_name)) { mutex_unlock(&rdata->rp_mutex); LIBFCOE_FIP_DBG(fip, "vn_add rport logoff %6.6x\n", port_id); fc_rport_logoff(rdata); mutex_lock(&rdata->rp_mutex); } - ids->port_name = new->ids.port_name; - ids->node_name = new->ids.node_name; + ids->port_name = new->rdata.ids.port_name; + ids->node_name = new->rdata.ids.node_name; mutex_unlock(&rdata->rp_mutex); frport = fcoe_ctlr_rport(rdata); LIBFCOE_FIP_DBG(fip, "vn_add rport %6.6x %s state %d\n", port_id, frport->fcoe_len ? "old" : "new", rdata->rp_state); - *frport = *fcoe_ctlr_rport(new); + frport->fcoe_len = new->fcoe_len; + frport->flags = new->flags; + frport->login_count = new->login_count; + memcpy(frport->enode_mac, new->enode_mac, ETH_ALEN); + memcpy(frport->vn_mac, new->vn_mac, ETH_ALEN); frport->time = 0; } @@ -2560,16 +2564,14 @@ static int fcoe_ctlr_vn_lookup(struct fcoe_ctlr *fip, u32 port_id, u8 *mac) /** * fcoe_ctlr_vn_claim_notify() - handle received FIP VN2VN Claim Notification * @fip: The FCoE controller - * @new: newly-parsed remote port with frport as a template for new rdata + * @new: newly-parsed FCoE rport as a template for new rdata * * Called with ctlr_mutex held. */ static void fcoe_ctlr_vn_claim_notify(struct fcoe_ctlr *fip, - struct fc_rport_priv *new) + struct fcoe_rport *new) { - struct fcoe_rport *frport = fcoe_ctlr_rport(new); - - if (frport->flags & FIP_FL_REC_OR_P2P) { + if (new->flags & FIP_FL_REC_OR_P2P) { LIBFCOE_FIP_DBG(fip, "send probe req for P2P/REC\n"); fcoe_ctlr_vn_send(fip, FIP_SC_VN_PROBE_REQ, fcoe_all_vn2vn, 0); return; @@ -2578,7 +2580,7 @@ static void fcoe_ctlr_vn_claim_notify(struct fcoe_ctlr *fip, case FIP_ST_VNMP_START: case FIP_ST_VNMP_PROBE1: case FIP_ST_VNMP_PROBE2: - if (new->ids.port_id == fip->port_id) { + if (new->rdata.ids.port_id == fip->port_id) { LIBFCOE_FIP_DBG(fip, "vn_claim_notify: " "restart, state %d\n", fip->state); @@ -2587,8 +2589,8 @@ static void fcoe_ctlr_vn_claim_notify(struct fcoe_ctlr *fip, break; case FIP_ST_VNMP_CLAIM: case FIP_ST_VNMP_UP: - if (new->ids.port_id == fip->port_id) { - if (new->ids.port_name > fip->lp->wwpn) { + if (new->rdata.ids.port_id == fip->port_id) { + if (new->rdata.ids.port_name > fip->lp->wwpn) { LIBFCOE_FIP_DBG(fip, "vn_claim_notify: " "restart, port_id collision\n"); fcoe_ctlr_vn_restart(fip); @@ -2600,15 +2602,16 @@ static void fcoe_ctlr_vn_claim_notify(struct fcoe_ctlr *fip, break; } LIBFCOE_FIP_DBG(fip, "vn_claim_notify: send reply to %x\n", - new->ids.port_id); - fcoe_ctlr_vn_send(fip, FIP_SC_VN_CLAIM_REP, frport->enode_mac, - min((u32)frport->fcoe_len, + new->rdata.ids.port_id); + fcoe_ctlr_vn_send(fip, FIP_SC_VN_CLAIM_REP, new->enode_mac, + min((u32)new->fcoe_len, fcoe_ctlr_fcoe_size(fip))); fcoe_ctlr_vn_add(fip, new); break; default: LIBFCOE_FIP_DBG(fip, "vn_claim_notify: " - "ignoring claim from %x\n", new->ids.port_id); + "ignoring claim from %x\n", + new->rdata.ids.port_id); break; } } @@ -2616,15 +2619,15 @@ static void fcoe_ctlr_vn_claim_notify(struct fcoe_ctlr *fip, /** * fcoe_ctlr_vn_claim_resp() - handle received Claim Response * @fip: The FCoE controller that received the frame - * @new: newly-parsed remote port with frport from the Claim Response + * @new: newly-parsed FCoE rport from the Claim Response * * Called with ctlr_mutex held. */ static void fcoe_ctlr_vn_claim_resp(struct fcoe_ctlr *fip, - struct fc_rport_priv *new) + struct fcoe_rport *new) { LIBFCOE_FIP_DBG(fip, "claim resp from from rport %x - state %s\n", - new->ids.port_id, fcoe_ctlr_state(fip->state)); + new->rdata.ids.port_id, fcoe_ctlr_state(fip->state)); if (fip->state == FIP_ST_VNMP_UP || fip->state == FIP_ST_VNMP_CLAIM) fcoe_ctlr_vn_add(fip, new); } @@ -2632,28 +2635,28 @@ static void fcoe_ctlr_vn_claim_resp(struct fcoe_ctlr *fip, /** * fcoe_ctlr_vn_beacon() - handle received beacon. * @fip: The FCoE controller that received the frame - * @new: newly-parsed remote port with frport from the Beacon + * @new: newly-parsed FCoE rport from the Beacon * * Called with ctlr_mutex held. */ static void fcoe_ctlr_vn_beacon(struct fcoe_ctlr *fip, - struct fc_rport_priv *new) + struct fcoe_rport *new) { struct fc_lport *lport = fip->lp; struct fc_rport_priv *rdata; struct fcoe_rport *frport; - frport = fcoe_ctlr_rport(new); - if (frport->flags & FIP_FL_REC_OR_P2P) { + if (new->flags & FIP_FL_REC_OR_P2P) { LIBFCOE_FIP_DBG(fip, "p2p beacon while in vn2vn mode\n"); fcoe_ctlr_vn_send(fip, FIP_SC_VN_PROBE_REQ, fcoe_all_vn2vn, 0); return; } - rdata = fc_rport_lookup(lport, new->ids.port_id); + rdata = fc_rport_lookup(lport, new->rdata.ids.port_id); if (rdata) { - if (rdata->ids.node_name == new->ids.node_name && - rdata->ids.port_name == new->ids.port_name) { + if (rdata->ids.node_name == new->rdata.ids.node_name && + rdata->ids.port_name == new->rdata.ids.port_name) { frport = fcoe_ctlr_rport(rdata); + LIBFCOE_FIP_DBG(fip, "beacon from rport %x\n", rdata->ids.port_id); if (!frport->time && fip->state == FIP_ST_VNMP_UP) { @@ -2676,7 +2679,7 @@ static void fcoe_ctlr_vn_beacon(struct fcoe_ctlr *fip, * Don't add the neighbor yet. */ LIBFCOE_FIP_DBG(fip, "beacon from new rport %x. sending claim notify\n", - new->ids.port_id); + new->rdata.ids.port_id); if (time_after(jiffies, fip->sol_time + msecs_to_jiffies(FIP_VN_ANN_WAIT))) fcoe_ctlr_vn_send_claim(fip); @@ -2761,19 +2764,19 @@ static int fcoe_ctlr_vn_recv(struct fcoe_ctlr *fip, struct sk_buff *skb) mutex_lock(&fip->ctlr_mutex); switch (sub) { case FIP_SC_VN_PROBE_REQ: - fcoe_ctlr_vn_probe_req(fip, &frport.rdata); + fcoe_ctlr_vn_probe_req(fip, &frport); break; case FIP_SC_VN_PROBE_REP: - fcoe_ctlr_vn_probe_reply(fip, &frport.rdata); + fcoe_ctlr_vn_probe_reply(fip, &frport); break; case FIP_SC_VN_CLAIM_NOTIFY: - fcoe_ctlr_vn_claim_notify(fip, &frport.rdata); + fcoe_ctlr_vn_claim_notify(fip, &frport); break; case FIP_SC_VN_CLAIM_REP: - fcoe_ctlr_vn_claim_resp(fip, &frport.rdata); + fcoe_ctlr_vn_claim_resp(fip, &frport); break; case FIP_SC_VN_BEACON: - fcoe_ctlr_vn_beacon(fip, &frport.rdata); + fcoe_ctlr_vn_beacon(fip, &frport); break; default: LIBFCOE_FIP_DBG(fip, "vn_recv unknown subcode %d\n", sub); @@ -2949,13 +2952,13 @@ static void fcoe_ctlr_vlan_send(struct fcoe_ctlr *fip, /** * fcoe_ctlr_vlan_disk_reply() - send FIP VLAN Discovery Notification. * @fip: The FCoE controller + * @frport: The newly-parsed FCoE rport from the Discovery Request * * Called with ctlr_mutex held. */ static void fcoe_ctlr_vlan_disc_reply(struct fcoe_ctlr *fip, - struct fc_rport_priv *rdata) + struct fcoe_rport *frport) { - struct fcoe_rport *frport = fcoe_ctlr_rport(rdata); enum fip_vlan_subcode sub = FIP_SC_VL_NOTE; if (fip->mode == FIP_MODE_VN2VN) @@ -2986,7 +2989,7 @@ static int fcoe_ctlr_vlan_recv(struct fcoe_ctlr *fip, struct sk_buff *skb) } mutex_lock(&fip->ctlr_mutex); if (sub == FIP_SC_VL_REQ) - fcoe_ctlr_vlan_disc_reply(fip, &frport.rdata); + fcoe_ctlr_vlan_disc_reply(fip, &frport); mutex_unlock(&fip->ctlr_mutex); drop: -- cgit From c00f9c6b79f7e1c5caf774c38e9fd5dad2d2ef1c Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Wed, 12 Jun 2019 11:17:46 +0800 Subject: drm/i915/gvt: remove duplicate include of trace.h This removes duplicate include of trace.h. Found by Hariprasad Kelam with includecheck. Reported-by: Hariprasad Kelam Reviewed-by: Yan Zhao Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/trace_points.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/trace_points.c b/drivers/gpu/drm/i915/gvt/trace_points.c index a3deed692b9c..fe552e877e09 100644 --- a/drivers/gpu/drm/i915/gvt/trace_points.c +++ b/drivers/gpu/drm/i915/gvt/trace_points.c @@ -28,8 +28,6 @@ * */ -#include "trace.h" - #ifndef __CHECKER__ #define CREATE_TRACE_POINTS #include "trace.h" -- cgit From d18fd0576e05a4b03b588e131093b0437fccb75f Mon Sep 17 00:00:00 2001 From: Xiong Zhang Date: Mon, 27 May 2019 13:45:51 +0800 Subject: drm/i915/gvt: Warning for invalid ggtt access Instead of silently return virtual ggtt entries that guest is allowed to access, this patch add extra range check. If guest read out of range, it will print a warning and return 0. If guest write out of range, the write will be dropped without any message. Reviewed-by: Zhenyu Wang Signed-off-by: Xiong Zhang Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/gtt.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/i915/gvt/gtt.c b/drivers/gpu/drm/i915/gvt/gtt.c index 53115bdae12b..4b04af569c05 100644 --- a/drivers/gpu/drm/i915/gvt/gtt.c +++ b/drivers/gpu/drm/i915/gvt/gtt.c @@ -2141,11 +2141,20 @@ static int emulate_ggtt_mmio_read(struct intel_vgpu *vgpu, struct intel_vgpu_mm *ggtt_mm = vgpu->gtt.ggtt_mm; const struct intel_gvt_device_info *info = &vgpu->gvt->device_info; unsigned long index = off >> info->gtt_entry_size_shift; + unsigned long gma; struct intel_gvt_gtt_entry e; if (bytes != 4 && bytes != 8) return -EINVAL; + gma = index << I915_GTT_PAGE_SHIFT; + if (!intel_gvt_ggtt_validate_range(vgpu, + gma, 1 << I915_GTT_PAGE_SHIFT)) { + gvt_dbg_mm("read invalid ggtt at 0x%lx\n", gma); + memset(p_data, 0, bytes); + return 0; + } + ggtt_get_guest_entry(ggtt_mm, &e, index); memcpy(p_data, (void *)&e.val64 + (off & (info->gtt_entry_size - 1)), bytes); -- cgit From c25144098bee19b089c8a37c54517bf467f06403 Mon Sep 17 00:00:00 2001 From: Xiong Zhang Date: Mon, 27 May 2019 13:45:52 +0800 Subject: drm/i915/gvt: Don't use ggtt_validdate_range() with size=0 Use vgpu_gmadr_is_valid() directly instead. Reviewed-by: Zhenyu Wang Signed-off-by: Xiong Zhang Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/fb_decoder.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/fb_decoder.c b/drivers/gpu/drm/i915/gvt/fb_decoder.c index 65e847392aea..8bb292b01271 100644 --- a/drivers/gpu/drm/i915/gvt/fb_decoder.c +++ b/drivers/gpu/drm/i915/gvt/fb_decoder.c @@ -245,7 +245,7 @@ int intel_vgpu_decode_primary_plane(struct intel_vgpu *vgpu, plane->hw_format = fmt; plane->base = vgpu_vreg_t(vgpu, DSPSURF(pipe)) & I915_GTT_PAGE_MASK; - if (!intel_gvt_ggtt_validate_range(vgpu, plane->base, 0)) + if (!vgpu_gmadr_is_valid(vgpu, plane->base)) return -EINVAL; plane->base_gpa = intel_vgpu_gma_to_gpa(vgpu->gtt.ggtt_mm, plane->base); @@ -368,7 +368,7 @@ int intel_vgpu_decode_cursor_plane(struct intel_vgpu *vgpu, alpha_plane, alpha_force); plane->base = vgpu_vreg_t(vgpu, CURBASE(pipe)) & I915_GTT_PAGE_MASK; - if (!intel_gvt_ggtt_validate_range(vgpu, plane->base, 0)) + if (!vgpu_gmadr_is_valid(vgpu, plane->base)) return -EINVAL; plane->base_gpa = intel_vgpu_gma_to_gpa(vgpu->gtt.ggtt_mm, plane->base); @@ -472,7 +472,7 @@ int intel_vgpu_decode_sprite_plane(struct intel_vgpu *vgpu, plane->drm_format = drm_format; plane->base = vgpu_vreg_t(vgpu, SPRSURF(pipe)) & I915_GTT_PAGE_MASK; - if (!intel_gvt_ggtt_validate_range(vgpu, plane->base, 0)) + if (!vgpu_gmadr_is_valid(vgpu, plane->base)) return -EINVAL; plane->base_gpa = intel_vgpu_gma_to_gpa(vgpu->gtt.ggtt_mm, plane->base); -- cgit From 2089a76ade9005a06c5e08e8454f45f3625fdc1c Mon Sep 17 00:00:00 2001 From: Xiong Zhang Date: Mon, 27 May 2019 13:45:53 +0800 Subject: drm/i915/gvt: Checking workload's gma earlier Workload contains RB and WA_CTX which are in ggtt space, if they aren't in valid ggtt space, the workload shouldn't be shadowed and scanned. So checking them earlier to avoid shadow them. Reviewed-by: Zhenyu Wang Signed-off-by: Xiong Zhang Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/cmd_parser.c | 10 ---------- drivers/gpu/drm/i915/gvt/scheduler.c | 28 ++++++++++++++++++++++++++++ 2 files changed, 28 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/cmd_parser.c b/drivers/gpu/drm/i915/gvt/cmd_parser.c index 6ea88270c818..b09dc315e2da 100644 --- a/drivers/gpu/drm/i915/gvt/cmd_parser.c +++ b/drivers/gpu/drm/i915/gvt/cmd_parser.c @@ -2674,11 +2674,6 @@ static int scan_workload(struct intel_vgpu_workload *workload) gma_head == gma_tail) return 0; - if (!intel_gvt_ggtt_validate_range(s.vgpu, s.ring_start, s.ring_size)) { - ret = -EINVAL; - goto out; - } - ret = ip_gma_set(&s, gma_head); if (ret) goto out; @@ -2724,11 +2719,6 @@ static int scan_wa_ctx(struct intel_shadow_wa_ctx *wa_ctx) s.workload = workload; s.is_ctx_wa = true; - if (!intel_gvt_ggtt_validate_range(s.vgpu, s.ring_start, s.ring_size)) { - ret = -EINVAL; - goto out; - } - ret = ip_gma_set(&s, gma_head); if (ret) goto out; diff --git a/drivers/gpu/drm/i915/gvt/scheduler.c b/drivers/gpu/drm/i915/gvt/scheduler.c index 2144fb46d0e1..6469366c1753 100644 --- a/drivers/gpu/drm/i915/gvt/scheduler.c +++ b/drivers/gpu/drm/i915/gvt/scheduler.c @@ -1492,6 +1492,12 @@ intel_vgpu_create_workload(struct intel_vgpu *vgpu, int ring_id, intel_gvt_hypervisor_read_gpa(vgpu, ring_context_gpa + RING_CTX_OFF(ctx_ctrl.val), &ctx_ctl, 4); + if (!intel_gvt_ggtt_validate_range(vgpu, start, + _RING_CTL_BUF_SIZE(ctl))) { + gvt_vgpu_err("context contain invalid rb at: 0x%x\n", start); + return ERR_PTR(-EINVAL); + } + workload = alloc_workload(vgpu); if (IS_ERR(workload)) return workload; @@ -1516,9 +1522,31 @@ intel_vgpu_create_workload(struct intel_vgpu *vgpu, int ring_id, workload->wa_ctx.indirect_ctx.size = (indirect_ctx & INDIRECT_CTX_SIZE_MASK) * CACHELINE_BYTES; + + if (workload->wa_ctx.indirect_ctx.size != 0) { + if (!intel_gvt_ggtt_validate_range(vgpu, + workload->wa_ctx.indirect_ctx.guest_gma, + workload->wa_ctx.indirect_ctx.size)) { + kmem_cache_free(s->workloads, workload); + gvt_vgpu_err("invalid wa_ctx at: 0x%lx\n", + workload->wa_ctx.indirect_ctx.guest_gma); + return ERR_PTR(-EINVAL); + } + } + workload->wa_ctx.per_ctx.guest_gma = per_ctx & PER_CTX_ADDR_MASK; workload->wa_ctx.per_ctx.valid = per_ctx & 1; + if (workload->wa_ctx.per_ctx.valid) { + if (!intel_gvt_ggtt_validate_range(vgpu, + workload->wa_ctx.per_ctx.guest_gma, + CACHELINE_BYTES)) { + kmem_cache_free(s->workloads, workload); + gvt_vgpu_err("invalid per_ctx at: 0x%lx\n", + workload->wa_ctx.per_ctx.guest_gma); + return ERR_PTR(-EINVAL); + } + } } gvt_dbg_el("workload %p ring id %d head %x tail %x start %x ctl %x\n", -- cgit From 7366aeb77cd840f3edea02c65065d40affaa7f45 Mon Sep 17 00:00:00 2001 From: Xiaolin Zhang Date: Thu, 18 Jul 2019 01:10:24 +0800 Subject: drm/i915/gvt: fix incorrect cache entry for guest page mapping GPU hang observed during the guest OCL conformance test which is caused by THP GTT feature used durning the test. It was observed the same GFN with different size (4K and 2M) requested from the guest in GVT. So during the guest page dma map stage, it is required to unmap first with orginal size and then remap again with requested size. Fixes: b901b252b6cf ("drm/i915/gvt: Add 2M huge gtt support") Cc: stable@vger.kernel.org Reviewed-by: Zhenyu Wang Signed-off-by: Xiaolin Zhang Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/kvmgt.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/drm/i915/gvt/kvmgt.c b/drivers/gpu/drm/i915/gvt/kvmgt.c index 144301b778df..23aa3e50cbf8 100644 --- a/drivers/gpu/drm/i915/gvt/kvmgt.c +++ b/drivers/gpu/drm/i915/gvt/kvmgt.c @@ -1904,6 +1904,18 @@ static int kvmgt_dma_map_guest_page(unsigned long handle, unsigned long gfn, entry = __gvt_cache_find_gfn(info->vgpu, gfn); if (!entry) { + ret = gvt_dma_map_page(vgpu, gfn, dma_addr, size); + if (ret) + goto err_unlock; + + ret = __gvt_cache_add(info->vgpu, gfn, *dma_addr, size); + if (ret) + goto err_unmap; + } else if (entry->size != size) { + /* the same gfn with different size: unmap and re-map */ + gvt_dma_unmap_page(vgpu, gfn, entry->dma_addr, entry->size); + __gvt_cache_remove_entry(vgpu, entry); + ret = gvt_dma_map_page(vgpu, gfn, dma_addr, size); if (ret) goto err_unlock; -- cgit From ef5b0b444e6297d03ac0bdc0c82f65396ef4dccd Mon Sep 17 00:00:00 2001 From: Xiaolin Zhang Date: Thu, 20 Jun 2019 10:29:24 -0400 Subject: drm/i915/gvt: grab runtime pm first for forcewake use in workload_thread, it should grab runtime pm wakelock and later uncore forcewake get will check rpm wakelock held successfully. otherwise, sometimes, rpm wakelock not hold and print call trace below: Call Trace: intel_uncore_forcewake_get+0x15/0x20 [i915] workload_thread+0x5f9/0x16f0 [i915] ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to+0x85/0x3f0 ? __switch_to_asm+0x40/0x70 ? do_wait_intr_irq+0x90/0x90 kthread+0x121/0x140 ? intel_vgpu_clean_workloads+0x100/0x100 [i915] ? kthread_park+0x90/0x90 ret_from_fork+0x35/0x40 --[ end trace 86525f742a02e12c ]-- v2: adapted to use rpm structure. Fixes: 251d46b0875c ("drm/i915/gvt: Pin the per-engine GVT shadow contexts") Reviewed-by: Zhenyu Wang Signed-off-by: Xiaolin Zhang Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/scheduler.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/i915/gvt/scheduler.c b/drivers/gpu/drm/i915/gvt/scheduler.c index 6469366c1753..196b4155a309 100644 --- a/drivers/gpu/drm/i915/gvt/scheduler.c +++ b/drivers/gpu/drm/i915/gvt/scheduler.c @@ -990,6 +990,7 @@ static int workload_thread(void *priv) int ret; bool need_force_wake = (INTEL_GEN(gvt->dev_priv) >= 9); DEFINE_WAIT_FUNC(wait, woken_wake_function); + struct intel_runtime_pm *rpm = &gvt->dev_priv->runtime_pm; kfree(p); @@ -1013,6 +1014,8 @@ static int workload_thread(void *priv) workload->ring_id, workload, workload->vgpu->id); + intel_runtime_pm_get(rpm); + gvt_dbg_sched("ring id %d will dispatch workload %p\n", workload->ring_id, workload); @@ -1042,6 +1045,7 @@ complete: intel_uncore_forcewake_put(&gvt->dev_priv->uncore, FORCEWAKE_ALL); + intel_runtime_pm_put_unchecked(rpm); if (ret && (vgpu_is_vm_unhealthy(ret))) enter_failsafe_mode(vgpu, GVT_FAILSAFE_GUEST_ERR); } -- cgit From 4187414808095f645ca0661f8dde77617e2e7cb3 Mon Sep 17 00:00:00 2001 From: Colin Xu Date: Thu, 4 Jul 2019 16:45:06 +0800 Subject: drm/i915/gvt: Adding ppgtt to GVT GEM context after shadow pdps settled. Windows guest can't run after force-TDR with host log: ... gvt: vgpu 1: workload shadow ppgtt isn't ready gvt: vgpu 1: fail to dispatch workload, skip ... The error is raised by set_context_ppgtt_from_shadow(), when it checks and found the shadow_mm isn't marked as shadowed. In work thread before each submission, a shadow_mm is set to shadowed in: shadow_ppgtt_mm() <-intel_vgpu_pin_mm() <-prepare_workload() <-dispatch_workload() <-workload_thread() However checking whether or not shadow_mm is shadowed is prior to it: set_context_ppgtt_from_shadow() <-dispatch_workload() <-workload_thread() In normal case, create workload will check the existence of shadow_mm, if not it will create a new one and marked as shadowed. If already exist it will reuse the old one. Since shadow_mm is reused, checking of shadowed in set_context_ppgtt_from_shadow() actually always see the state set in creation, but not the state set in intel_vgpu_pin_mm(). When force-TDR, all engines are reset, since it's not dmlr level, all ppgtt_mm are invalidated but not destroyed. Invalidation will mark all reused shadow_mm as not shadowed but still keeps in ppgtt_mm_list_head. If workload submission phase those shadow_mm are reused with shadowed not set, then set_context_ppgtt_from_shadow() will report error. Pin for context after shadow_mm pinned and shadow pdps settled. v2: Move set_context_ppgtt_from_shadow() after prepare_workload(). (zhenyu) v3: Move set_context_ppgtt_from_shadow() after shadow pdps updated.(zhenyu) Fixes: 4f15665ccbba ("drm/i915: Add ppgtt to GVT GEM context") Cc: stable@vger.kernel.org Signed-off-by: Colin Xu Signed-off-by: Zhenyu Wang --- drivers/gpu/drm/i915/gvt/scheduler.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/i915/gvt/scheduler.c b/drivers/gpu/drm/i915/gvt/scheduler.c index 196b4155a309..9f3fd7d96a69 100644 --- a/drivers/gpu/drm/i915/gvt/scheduler.c +++ b/drivers/gpu/drm/i915/gvt/scheduler.c @@ -364,16 +364,13 @@ static void release_shadow_wa_ctx(struct intel_shadow_wa_ctx *wa_ctx) wa_ctx->indirect_ctx.shadow_va = NULL; } -static int set_context_ppgtt_from_shadow(struct intel_vgpu_workload *workload, - struct i915_gem_context *ctx) +static void set_context_ppgtt_from_shadow(struct intel_vgpu_workload *workload, + struct i915_gem_context *ctx) { struct intel_vgpu_mm *mm = workload->shadow_mm; struct i915_ppgtt *ppgtt = i915_vm_to_ppgtt(ctx->vm); int i = 0; - if (mm->type != INTEL_GVT_MM_PPGTT || !mm->ppgtt_mm.shadowed) - return -EINVAL; - if (mm->ppgtt_mm.root_entry_type == GTT_TYPE_PPGTT_ROOT_L4_ENTRY) { px_dma(ppgtt->pd) = mm->ppgtt_mm.shadow_pdps[0]; } else { @@ -384,8 +381,6 @@ static int set_context_ppgtt_from_shadow(struct intel_vgpu_workload *workload, px_dma(pd) = mm->ppgtt_mm.shadow_pdps[i]; } } - - return 0; } static int @@ -614,6 +609,8 @@ static void release_shadow_batch_buffer(struct intel_vgpu_workload *workload) static int prepare_workload(struct intel_vgpu_workload *workload) { struct intel_vgpu *vgpu = workload->vgpu; + struct intel_vgpu_submission *s = &vgpu->submission; + int ring = workload->ring_id; int ret = 0; ret = intel_vgpu_pin_mm(workload->shadow_mm); @@ -622,8 +619,16 @@ static int prepare_workload(struct intel_vgpu_workload *workload) return ret; } + if (workload->shadow_mm->type != INTEL_GVT_MM_PPGTT || + !workload->shadow_mm->ppgtt_mm.shadowed) { + gvt_vgpu_err("workload shadow ppgtt isn't ready\n"); + return -EINVAL; + } + update_shadow_pdps(workload); + set_context_ppgtt_from_shadow(workload, s->shadow[ring]->gem_context); + ret = intel_vgpu_sync_oos_pages(workload->vgpu); if (ret) { gvt_vgpu_err("fail to vgpu sync oos pages\n"); @@ -674,7 +679,6 @@ static int dispatch_workload(struct intel_vgpu_workload *workload) { struct intel_vgpu *vgpu = workload->vgpu; struct drm_i915_private *dev_priv = vgpu->gvt->dev_priv; - struct intel_vgpu_submission *s = &vgpu->submission; struct i915_request *rq; int ring_id = workload->ring_id; int ret; @@ -685,13 +689,6 @@ static int dispatch_workload(struct intel_vgpu_workload *workload) mutex_lock(&vgpu->vgpu_lock); mutex_lock(&dev_priv->drm.struct_mutex); - ret = set_context_ppgtt_from_shadow(workload, - s->shadow[ring_id]->gem_context); - if (ret < 0) { - gvt_vgpu_err("workload shadow ppgtt isn't ready\n"); - goto err_req; - } - ret = intel_gvt_workload_req_alloc(workload); if (ret) goto err_req; -- cgit From 1957de95d425d1c06560069dc7277a73a8b28683 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 24 Jul 2019 07:38:32 -0700 Subject: usb: typec: tcpm: Add NULL check before dereferencing config When instantiating tcpm on an NXP OM 13588 board with NXP PTN5110, the following crash is seen when writing into the 'preferred_role' sysfs attribute. Unable to handle kernel NULL pointer dereference at virtual address 00000028 pgd = f69149ad [00000028] *pgd=00000000 Internal error: Oops: 5 [#1] THUMB2 Modules linked in: tcpci tcpm CPU: 0 PID: 1882 Comm: bash Not tainted 5.1.18-sama5-armv7-r2 #4 Hardware name: Atmel SAMA5 PC is at tcpm_try_role+0x3a/0x4c [tcpm] LR is at tcpm_try_role+0x15/0x4c [tcpm] pc : [] lr : [] psr: 60030033 sp : dc1a1e88 ip : c03fb47d fp : 00000000 r10: dc216190 r9 : dc1a1f78 r8 : 00000001 r7 : df4ae044 r6 : dd032e90 r5 : dd1ce340 r4 : df4ae054 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : df4ae044 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment none Control: 50c53c7d Table: 3efec059 DAC: 00000051 Process bash (pid: 1882, stack limit = 0x6a6d4aa5) Stack: (0xdc1a1e88 to 0xdc1a2000) 1e80: dd05d808 dd1ce340 00000001 00000007 dd1ce340 c03fb4a7 1ea0: 00000007 00000007 dc216180 00000000 00000000 c01e1e03 00000000 00000000 1ec0: c0907008 dee98b40 c01e1d5d c06106c4 00000000 00000000 00000007 c0194e8b 1ee0: 0000000a 00000400 00000000 c01a97db dc22bf00 ffffe000 df4b6a00 df745900 1f00: 00000001 00000001 000000dd c01a9c2f 7aeab3be c0907008 00000000 dc22bf00 1f20: c0907008 00000000 00000000 00000000 00000000 7aeab3be 00000007 dee98b40 1f40: 005dc318 dc1a1f78 00000000 00000000 00000007 c01969f7 0000000a c01a20cb 1f60: dee98b40 c0907008 dee98b40 005dc318 00000000 c0196b9b 00000000 00000000 1f80: dee98b40 7aeab3be 00000074 005dc318 b6f3bdb0 00000004 c0101224 dc1a0000 1fa0: 00000004 c0101001 00000074 005dc318 00000001 005dc318 00000007 00000000 1fc0: 00000074 005dc318 b6f3bdb0 00000004 00000007 00000007 00000000 00000000 1fe0: 00000004 be800880 b6ed35b3 b6e5c746 60030030 00000001 00000000 00000000 [] (tcpm_try_role [tcpm]) from [] (preferred_role_store+0x2b/0x5c) [] (preferred_role_store) from [] (kernfs_fop_write+0xa7/0x150) [] (kernfs_fop_write) from [] (__vfs_write+0x1f/0x104) [] (__vfs_write) from [] (vfs_write+0x6b/0x104) [] (vfs_write) from [] (ksys_write+0x43/0x94) [] (ksys_write) from [] (ret_fast_syscall+0x1/0x62) Since commit 96232cbc6c994 ("usb: typec: tcpm: support get typec and pd config from device properties"), the 'config' pointer in struct tcpc_dev is optional when registering a Type-C port. Since it is optional, we have to check if it is NULL before dereferencing it. Reported-by: Douglas Gilbert Cc: Douglas Gilbert Fixes: 96232cbc6c994 ("usb: typec: tcpm: support get typec and pd config from device properties") Signed-off-by: Guenter Roeck Cc: stable Reviewed-by: Jun Li Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/1563979112-22483-1-git-send-email-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index fba32d84e578..77f71f602f73 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -379,7 +379,8 @@ static enum tcpm_state tcpm_default_state(struct tcpm_port *port) return SNK_UNATTACHED; else if (port->try_role == TYPEC_SOURCE) return SRC_UNATTACHED; - else if (port->tcpc->config->default_role == TYPEC_SINK) + else if (port->tcpc->config && + port->tcpc->config->default_role == TYPEC_SINK) return SNK_UNATTACHED; /* Fall through to return SRC_UNATTACHED */ } else if (port->port_type == TYPEC_PORT_SNK) { @@ -4114,7 +4115,7 @@ static int tcpm_try_role(const struct typec_capability *cap, int role) mutex_lock(&port->lock); if (tcpc->try_role) ret = tcpc->try_role(tcpc, role); - if (!ret && !tcpc->config->try_role_hw) + if (!ret && (!tcpc->config || !tcpc->config->try_role_hw)) port->try_role = role; port->try_src_count = 0; port->try_snk_count = 0; @@ -4701,7 +4702,7 @@ static int tcpm_copy_caps(struct tcpm_port *port, port->typec_caps.prefer_role = tcfg->default_role; port->typec_caps.type = tcfg->type; port->typec_caps.data = tcfg->data; - port->self_powered = port->tcpc->config->self_powered; + port->self_powered = tcfg->self_powered; return 0; } -- cgit From fd5da3e2cc61b4a7c877172fdc9348c82cf6ccfc Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 17 Jul 2019 16:06:45 +0800 Subject: usb: typec: tcpm: free log buf memory when remove debug file The logbuffer memory should be freed when remove debug file. Cc: stable@vger.kernel.org # v4.15+ Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging") Signed-off-by: Li Jun Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20190717080646.30421-1-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 77f71f602f73..7b6497c1031e 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -587,6 +587,15 @@ static void tcpm_debugfs_init(struct tcpm_port *port) static void tcpm_debugfs_exit(struct tcpm_port *port) { + int i; + + mutex_lock(&port->logbuffer_lock); + for (i = 0; i < LOG_BUFFER_ENTRIES; i++) { + kfree(port->logbuffer[i]); + port->logbuffer[i] = NULL; + } + mutex_unlock(&port->logbuffer_lock); + debugfs_remove(port->dentry); } -- cgit From 12ca7297b8855c0af1848503d37196159b24e6b9 Mon Sep 17 00:00:00 2001 From: Li Jun Date: Wed, 17 Jul 2019 16:06:46 +0800 Subject: usb: typec: tcpm: remove tcpm dir if no children If config tcpm as module, module unload will not remove tcpm dir, then the next module load will have problem: the rootdir is NULL but tcpm dir is still there, so tcpm_debugfs_init() will create tcpm dir again with failure, fix it by remove the tcpm dir if no children. Cc: stable@vger.kernel.org # v4.15+ Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging") Signed-off-by: Li Jun Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20190717080646.30421-2-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 7b6497c1031e..ab6456622120 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -597,6 +597,10 @@ static void tcpm_debugfs_exit(struct tcpm_port *port) mutex_unlock(&port->logbuffer_lock); debugfs_remove(port->dentry); + if (list_empty(&rootdir->d_subdirs)) { + debugfs_remove(rootdir); + rootdir = NULL; + } } #else -- cgit From 5d78e1c2b7f4be00bbe62141603a631dc7812f35 Mon Sep 17 00:00:00 2001 From: Hillf Danton Date: Tue, 30 Jul 2019 17:24:36 +0800 Subject: ALSA: usb-audio: Fix gpf in snd_usb_pipe_sanity_check syzbot found the following crash on: general protection fault: 0000 [#1] SMP KASAN RIP: 0010:snd_usb_pipe_sanity_check+0x80/0x130 sound/usb/helper.c:75 Call Trace: snd_usb_motu_microbookii_communicate.constprop.0+0xa0/0x2fb sound/usb/quirks.c:1007 snd_usb_motu_microbookii_boot_quirk sound/usb/quirks.c:1051 [inline] snd_usb_apply_boot_quirk.cold+0x163/0x370 sound/usb/quirks.c:1280 usb_audio_probe+0x2ec/0x2010 sound/usb/card.c:576 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x650 drivers/base/dd.c:548 .... It was introduced in commit 801ebf1043ae for checking pipe and endpoint types. It is fixed by adding a check of the ep pointer in question. BugLink: https://syzkaller.appspot.com/bug?extid=d59c4387bfb6eced94e2 Reported-by: syzbot Fixes: 801ebf1043ae ("ALSA: usb-audio: Sanity checks for each pipe and EP types") Cc: Andrey Konovalov Signed-off-by: Hillf Danton Signed-off-by: Takashi Iwai --- sound/usb/helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/helper.c b/sound/usb/helper.c index 71d5f540334a..4c12cc5b53fd 100644 --- a/sound/usb/helper.c +++ b/sound/usb/helper.c @@ -72,7 +72,7 @@ int snd_usb_pipe_sanity_check(struct usb_device *dev, unsigned int pipe) struct usb_host_endpoint *ep; ep = usb_pipe_endpoint(dev, pipe); - if (usb_pipetype(pipe) != pipetypes[usb_endpoint_type(&ep->desc)]) + if (!ep || usb_pipetype(pipe) != pipetypes[usb_endpoint_type(&ep->desc)]) return -EINVAL; return 0; } -- cgit From da1115fdbd6e86c62185cdd2b4bf7add39f2f82b Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Mon, 29 Jul 2019 15:21:28 +0530 Subject: powerpc/nvdimm: Pick nearby online node if the device node is not online MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, nvdimm subsystem expects the device numa node for SCM device to be an online node. It also doesn't try to bring the device numa node online. Hence if we use a non-online numa node as device node we hit crashes like below. This is because we try to access uninitialized NODE_DATA in different code paths. cpu 0x0: Vector: 300 (Data Access) at [c0000000fac53170] pc: c0000000004bbc50: ___slab_alloc+0x120/0xca0 lr: c0000000004bc834: __slab_alloc+0x64/0xc0 sp: c0000000fac53400 msr: 8000000002009033 dar: 73e8 dsisr: 80000 current = 0xc0000000fabb6d80 paca = 0xc000000003870000 irqmask: 0x03 irq_happened: 0x01 pid = 7, comm = kworker/u16:0 Linux version 5.2.0-06234-g76bd729b2644 (kvaneesh@ltc-boston123) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #135 SMP Thu Jul 11 05:36:30 CDT 2019 enter ? for help [link register ] c0000000004bc834 __slab_alloc+0x64/0xc0 [c0000000fac53400] c0000000fac53480 (unreliable) [c0000000fac53500] c0000000004bc818 __slab_alloc+0x48/0xc0 [c0000000fac53560] c0000000004c30a0 __kmalloc_node_track_caller+0x3c0/0x6b0 [c0000000fac535d0] c000000000cfafe4 devm_kmalloc+0x74/0xc0 [c0000000fac53600] c000000000d69434 nd_region_activate+0x144/0x560 [c0000000fac536d0] c000000000d6b19c nd_region_probe+0x17c/0x370 [c0000000fac537b0] c000000000d6349c nvdimm_bus_probe+0x10c/0x230 [c0000000fac53840] c000000000cf3cc4 really_probe+0x254/0x4e0 [c0000000fac538d0] c000000000cf429c driver_probe_device+0x16c/0x1e0 [c0000000fac53950] c000000000cf0b44 bus_for_each_drv+0x94/0x130 [c0000000fac539b0] c000000000cf392c __device_attach+0xdc/0x200 [c0000000fac53a50] c000000000cf231c bus_probe_device+0x4c/0xf0 [c0000000fac53a90] c000000000ced268 device_add+0x528/0x810 [c0000000fac53b60] c000000000d62a58 nd_async_device_register+0x28/0xa0 [c0000000fac53bd0] c0000000001ccb8c async_run_entry_fn+0xcc/0x1f0 [c0000000fac53c50] c0000000001bcd9c process_one_work+0x46c/0x860 [c0000000fac53d20] c0000000001bd4f4 worker_thread+0x364/0x5f0 [c0000000fac53db0] c0000000001c7260 kthread+0x1b0/0x1c0 [c0000000fac53e20] c00000000000b954 ret_from_kernel_thread+0x5c/0x68 The patch tries to fix this by picking the nearest online node as the SCM node. This does have a problem of us losing the information that SCM node is equidistant from two other online nodes. If applications need to understand these fine-grained details we should express then like x86 does via /sys/devices/system/node/nodeX/accessY/initiators/ With the patch we get # numactl -H available: 2 nodes (0-1) node 0 cpus: node 0 size: 0 MB node 0 free: 0 MB node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 node 1 size: 130865 MB node 1 free: 129130 MB node distances: node 0 1 0: 10 20 1: 20 10 # cat /sys/bus/nd/devices/region0/numa_node 0 # dmesg | grep papr_scm [ 91.332305] papr_scm ibm,persistent-memory:ibm,pmemory@44104001: Region registered with target node 2 and online node 0 Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190729095128.23707-1-aneesh.kumar@linux.ibm.com --- arch/powerpc/platforms/pseries/papr_scm.c | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c index 2c07908359b2..a5ac371a3f06 100644 --- a/arch/powerpc/platforms/pseries/papr_scm.c +++ b/arch/powerpc/platforms/pseries/papr_scm.c @@ -275,12 +275,32 @@ static const struct attribute_group *papr_scm_dimm_groups[] = { NULL, }; +static inline int papr_scm_node(int node) +{ + int min_dist = INT_MAX, dist; + int nid, min_node; + + if ((node == NUMA_NO_NODE) || node_online(node)) + return node; + + min_node = first_online_node; + for_each_online_node(nid) { + dist = node_distance(node, nid); + if (dist < min_dist) { + min_dist = dist; + min_node = nid; + } + } + return min_node; +} + static int papr_scm_nvdimm_init(struct papr_scm_priv *p) { struct device *dev = &p->pdev->dev; struct nd_mapping_desc mapping; struct nd_region_desc ndr_desc; unsigned long dimm_flags; + int target_nid, online_nid; p->bus_desc.ndctl = papr_scm_ndctl; p->bus_desc.module = THIS_MODULE; @@ -319,8 +339,10 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p) memset(&ndr_desc, 0, sizeof(ndr_desc)); ndr_desc.attr_groups = region_attr_groups; - ndr_desc.numa_node = dev_to_node(&p->pdev->dev); - ndr_desc.target_node = ndr_desc.numa_node; + target_nid = dev_to_node(&p->pdev->dev); + online_nid = papr_scm_node(target_nid); + ndr_desc.numa_node = online_nid; + ndr_desc.target_node = target_nid; ndr_desc.res = &p->res; ndr_desc.of_node = p->dn; ndr_desc.provider_data = p; @@ -338,6 +360,9 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p) ndr_desc.res, p->dn); goto err; } + if (target_nid != online_nid) + dev_info(dev, "Region registered with target node %d and online node %d", + target_nid, online_nid); return 0; -- cgit From 3b48300d5cc7c7bed63fddb006c4046549ed4aec Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 29 Jul 2019 17:58:10 +0200 Subject: netfilter: ebtables: also count base chain policies ebtables doesn't include the base chain policies in the rule count, so we need to add them manually when we call into the x_tables core to allocate space for the comapt offset table. This lead syzbot to trigger: WARNING: CPU: 1 PID: 9012 at net/netfilter/x_tables.c:649 xt_compat_add_offset.cold+0x11/0x36 net/netfilter/x_tables.c:649 Reported-by: syzbot+276ddebab3382bbf72db@syzkaller.appspotmail.com Fixes: 2035f3ff8eaa ("netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/bridge/netfilter/ebtables.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index fd84b48e48b5..c8177a89f52c 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -1770,20 +1770,28 @@ static int compat_calc_entry(const struct ebt_entry *e, return 0; } +static int ebt_compat_init_offsets(unsigned int number) +{ + if (number > INT_MAX) + return -EINVAL; + + /* also count the base chain policies */ + number += NF_BR_NUMHOOKS; + + return xt_compat_init_offsets(NFPROTO_BRIDGE, number); +} static int compat_table_info(const struct ebt_table_info *info, struct compat_ebt_replace *newinfo) { unsigned int size = info->entries_size; const void *entries = info->entries; + int ret; newinfo->entries_size = size; - if (info->nentries) { - int ret = xt_compat_init_offsets(NFPROTO_BRIDGE, - info->nentries); - if (ret) - return ret; - } + ret = ebt_compat_init_offsets(info->nentries); + if (ret) + return ret; return EBT_ENTRY_ITERATE(entries, size, compat_calc_entry, info, entries, newinfo); @@ -2234,11 +2242,9 @@ static int compat_do_replace(struct net *net, void __user *user, xt_compat_lock(NFPROTO_BRIDGE); - if (tmp.nentries) { - ret = xt_compat_init_offsets(NFPROTO_BRIDGE, tmp.nentries); - if (ret < 0) - goto out_unlock; - } + ret = ebt_compat_init_offsets(tmp.nentries); + if (ret < 0) + goto out_unlock; ret = compat_copy_entries(entries_tmp, tmp.entries_size, &state); if (ret < 0) -- cgit From 46c42d844211ef5902e32aa507beac0817c585e9 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 29 Jul 2019 13:49:54 -0700 Subject: driver core: platform: return -ENXIO for missing GpioInt Commit daaef255dc96 ("driver: platform: Support parsing GpioInt 0 in platform_get_irq()") broke the Embedded Controller driver on most LPC Chromebooks (i.e., most x86 Chromebooks), because cros_ec_lpc expects platform_get_irq() to return -ENXIO for non-existent IRQs. Unfortunately, acpi_dev_gpio_irq_get() doesn't follow this convention and returns -ENOENT instead. So we get this error from cros_ec_lpc: couldn't retrieve IRQ number (-2) I see a variety of drivers that treat -ENXIO specially, so rather than fix all of them, let's fix up the API to restore its previous behavior. I reported this on v2 of this patch: https://lore.kernel.org/lkml/20190220180538.GA42642@google.com/ but apparently the patch had already been merged before v3 got sent out: https://lore.kernel.org/lkml/20190221193429.161300-1-egranata@chromium.org/ and the result is that the bug landed and remains unfixed. I differ from the v3 patch by: * allowing for ret==0, even though acpi_dev_gpio_irq_get() specifically documents (and enforces) that 0 is not a valid return value (noted on the v3 review) * adding a small comment Reported-by: Brian Norris Reported-by: Salvatore Bellizzi Cc: Enrico Granata Cc: Fixes: daaef255dc96 ("driver: platform: Support parsing GpioInt 0 in platform_get_irq()") Signed-off-by: Brian Norris Reviewed-by: Andy Shevchenko Acked-by: Enrico Granata Link: https://lore.kernel.org/r/20190729204954.25510-1-briannorris@chromium.org Signed-off-by: Greg Kroah-Hartman --- drivers/base/platform.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 506a0175a5a7..ec974ba9c0c4 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -157,8 +157,13 @@ int platform_get_irq(struct platform_device *dev, unsigned int num) * the device will only expose one IRQ, and this fallback * allows a common code path across either kind of resource. */ - if (num == 0 && has_acpi_companion(&dev->dev)) - return acpi_dev_gpio_irq_get(ACPI_COMPANION(&dev->dev), num); + if (num == 0 && has_acpi_companion(&dev->dev)) { + int ret = acpi_dev_gpio_irq_get(ACPI_COMPANION(&dev->dev), num); + + /* Our callers expect -ENXIO for missing IRQs. */ + if (ret >= 0 || ret == -EPROBE_DEFER) + return ret; + } return -ENXIO; #endif -- cgit From f4cc743a98136df3c3763050a0e8223b52d9a960 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Mon, 29 Jul 2019 15:12:16 +0800 Subject: drm/bridge: lvds-encoder: Fix build error while CONFIG_DRM_KMS_HELPER=m If DRM_LVDS_ENCODER=y but CONFIG_DRM_KMS_HELPER=m, build fails: drivers/gpu/drm/bridge/lvds-encoder.o: In function `lvds_encoder_probe': lvds-encoder.c:(.text+0x155): undefined reference to `devm_drm_panel_bridge_add' Reported-by: Hulk Robot Fixes: dbb58bfd9ae6 ("drm/bridge: Fix lvds-encoder since the panel_bridge rework.") Signed-off-by: YueHaibing Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20190729071216.27488-1-yuehaibing@huawei.com --- drivers/gpu/drm/bridge/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index ee777469293a..cc62603b87c5 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -48,6 +48,7 @@ config DRM_DUMB_VGA_DAC config DRM_LVDS_ENCODER tristate "Transparent parallel to LVDS encoder support" depends on OF + select DRM_KMS_HELPER select DRM_PANEL_BRIDGE help Support for transparent parallel to LVDS encoders that don't require -- cgit From eef347f846ee8f7296a6f84e3866c057ca6bcce0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 30 Jul 2019 14:52:07 +0200 Subject: Revert "mac80211: set NETIF_F_LLTX when using intermediate tx queues" Revert this for now, it has been reported multiple times that it completely breaks connectivity on various devices. Cc: stable@vger.kernel.org Fixes: 8dbb000ee73b ("mac80211: set NETIF_F_LLTX when using intermediate tx queues") Reported-by: Jean Delvare Reported-by: Peter Lebbing Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 06aac0aaae64..8dc6580e1787 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1222,7 +1222,6 @@ static void ieee80211_if_setup(struct net_device *dev) static void ieee80211_if_setup_no_queue(struct net_device *dev) { ieee80211_if_setup(dev); - dev->features |= NETIF_F_LLTX; dev->priv_flags |= IFF_NO_QUEUE; } -- cgit From e1ae72a21e5f0d1846e26e3f5963930664702071 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Mon, 29 Jul 2019 17:05:20 +0800 Subject: drm/bridge: tc358764: Fix build error If CONFIG_DRM_TOSHIBA_TC358764=y but CONFIG_DRM_KMS_HELPER=m, building fails: drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x228): undefined reference to `drm_atomic_helper_connector_reset' drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x240): undefined reference to `drm_helper_probe_single_connector_modes' drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x268): undefined reference to `drm_atomic_helper_connector_duplicate_state' drivers/gpu/drm/bridge/tc358764.o:(.rodata+0x270): undefined reference to `drm_atomic_helper_connector_destroy_state' Like TC358767, select DRM_KMS_HELPER to fix this, and change to select DRM_PANEL to avoid recursive dependency. Reported-by: Hulk Robot Fixes: f38b7cca6d0e ("drm/bridge: tc358764: Add DSI to LVDS bridge driver") Signed-off-by: YueHaibing Reviewed-by: Laurent Pinchart Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20190729090520.25968-1-yuehaibing@huawei.com --- drivers/gpu/drm/bridge/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index cc62603b87c5..e4e22bbae2a7 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -117,9 +117,10 @@ config DRM_THINE_THC63LVD1024 config DRM_TOSHIBA_TC358764 tristate "TC358764 DSI/LVDS bridge" - depends on DRM && DRM_PANEL depends on OF select DRM_MIPI_DSI + select DRM_KMS_HELPER + select DRM_PANEL help Toshiba TC358764 DSI/LVDS bridge driver. -- cgit From 60034d3d146b11922ab1db613bce062dddc0327a Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 30 Jul 2019 14:42:50 +0100 Subject: rxrpc: Fix potential deadlock There is a potential deadlock in rxrpc_peer_keepalive_dispatch() whereby rxrpc_put_peer() is called with the peer_hash_lock held, but if it reduces the peer's refcount to 0, rxrpc_put_peer() calls __rxrpc_put_peer() - which the tries to take the already held lock. Fix this by providing a version of rxrpc_put_peer() that can be called in situations where the lock is already held. The bug may produce the following lockdep report: ============================================ WARNING: possible recursive locking detected 5.2.0-next-20190718 #41 Not tainted -------------------------------------------- kworker/0:3/21678 is trying to acquire lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: __rxrpc_put_peer /net/rxrpc/peer_object.c:415 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_put_peer+0x2d3/0x6a0 /net/rxrpc/peer_object.c:435 but task is already holding lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_dispatch /net/rxrpc/peer_event.c:378 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_worker+0x6b3/0xd02 /net/rxrpc/peer_event.c:430 Fixes: 330bdcfadcee ("rxrpc: Fix the keepalive generator [ver #2]") Reported-by: syzbot+72af434e4b3417318f84@syzkaller.appspotmail.com Signed-off-by: David Howells Reviewed-by: Marc Dionne Reviewed-by: Jeffrey Altman --- net/rxrpc/ar-internal.h | 1 + net/rxrpc/peer_event.c | 2 +- net/rxrpc/peer_object.c | 18 ++++++++++++++++++ 3 files changed, 20 insertions(+), 1 deletion(-) diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index 80335b4ee4fd..822f45386e31 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -1061,6 +1061,7 @@ void rxrpc_destroy_all_peers(struct rxrpc_net *); struct rxrpc_peer *rxrpc_get_peer(struct rxrpc_peer *); struct rxrpc_peer *rxrpc_get_peer_maybe(struct rxrpc_peer *); void rxrpc_put_peer(struct rxrpc_peer *); +void rxrpc_put_peer_locked(struct rxrpc_peer *); /* * proc.c diff --git a/net/rxrpc/peer_event.c b/net/rxrpc/peer_event.c index 9f2f45c09e58..7666ec72d37e 100644 --- a/net/rxrpc/peer_event.c +++ b/net/rxrpc/peer_event.c @@ -378,7 +378,7 @@ static void rxrpc_peer_keepalive_dispatch(struct rxrpc_net *rxnet, spin_lock_bh(&rxnet->peer_hash_lock); list_add_tail(&peer->keepalive_link, &rxnet->peer_keepalive[slot & mask]); - rxrpc_put_peer(peer); + rxrpc_put_peer_locked(peer); } spin_unlock_bh(&rxnet->peer_hash_lock); diff --git a/net/rxrpc/peer_object.c b/net/rxrpc/peer_object.c index 9d3ce81cf8ae..9c3ac96f71cb 100644 --- a/net/rxrpc/peer_object.c +++ b/net/rxrpc/peer_object.c @@ -436,6 +436,24 @@ void rxrpc_put_peer(struct rxrpc_peer *peer) } } +/* + * Drop a ref on a peer record where the caller already holds the + * peer_hash_lock. + */ +void rxrpc_put_peer_locked(struct rxrpc_peer *peer) +{ + const void *here = __builtin_return_address(0); + int n; + + n = atomic_dec_return(&peer->usage); + trace_rxrpc_peer(peer, rxrpc_peer_put, n, here); + if (n == 0) { + hash_del_rcu(&peer->hash_link); + list_del_init(&peer->keepalive_link); + kfree_rcu(peer, rcu); + } +} + /* * Make sure all peer records have been discarded. */ -- cgit From 7db57e77586744af46c8bbf8f831bb2b941b7afc Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 31 Jul 2019 00:00:15 +1000 Subject: powerpc/spe: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. Fixes errors such as below, seen with mpc85xx_defconfig: arch/powerpc/kernel/align.c: In function 'emulate_spe': arch/powerpc/kernel/align.c:178:8: error: this statement may fall through ret |= __get_user_inatomic(temp.v[3], p++); ^~ Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190730141917.21817-1-mpe@ellerman.id.au --- arch/powerpc/kernel/align.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index 7107ad86de65..92045ed64976 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -176,9 +176,11 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg, ret |= __get_user_inatomic(temp.v[1], p++); ret |= __get_user_inatomic(temp.v[2], p++); ret |= __get_user_inatomic(temp.v[3], p++); + /* fall through */ case 4: ret |= __get_user_inatomic(temp.v[4], p++); ret |= __get_user_inatomic(temp.v[5], p++); + /* fall through */ case 2: ret |= __get_user_inatomic(temp.v[6], p++); ret |= __get_user_inatomic(temp.v[7], p++); @@ -259,9 +261,11 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg, ret |= __put_user_inatomic(data.v[1], p++); ret |= __put_user_inatomic(data.v[2], p++); ret |= __put_user_inatomic(data.v[3], p++); + /* fall through */ case 4: ret |= __put_user_inatomic(data.v[4], p++); ret |= __put_user_inatomic(data.v[5], p++); + /* fall through */ case 2: ret |= __put_user_inatomic(data.v[6], p++); ret |= __put_user_inatomic(data.v[7], p++); -- cgit From c69565ee6681e151e2bb80502930a16e04b553d1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 30 Jul 2019 14:42:50 +0100 Subject: rxrpc: Fix the lack of notification when sendmsg() fails on a DATA packet Fix the fact that a notification isn't sent to the recvmsg side to indicate a call failed when sendmsg() fails to transmit a DATA packet with the error ENETUNREACH, EHOSTUNREACH or ECONNREFUSED. Without this notification, the afs client just sits there waiting for the call to complete in some manner (which it's not now going to do), which also pins the rxrpc call in place. This can be seen if the client has a scope-level IPv6 address, but not a global-level IPv6 address, and we try and transmit an operation to a server's IPv6 address. Looking in /proc/net/rxrpc/calls shows completed calls just sat there with an abort code of RX_USER_ABORT and an error code of -ENETUNREACH. Fixes: c54e43d752c7 ("rxrpc: Fix missing start of call timeout") Signed-off-by: David Howells Reviewed-by: Marc Dionne Reviewed-by: Jeffrey Altman --- net/rxrpc/sendmsg.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/rxrpc/sendmsg.c b/net/rxrpc/sendmsg.c index 5d3f33ce6d41..bae14438f869 100644 --- a/net/rxrpc/sendmsg.c +++ b/net/rxrpc/sendmsg.c @@ -226,6 +226,7 @@ static int rxrpc_queue_packet(struct rxrpc_sock *rx, struct rxrpc_call *call, rxrpc_set_call_completion(call, RXRPC_CALL_LOCAL_ERROR, 0, ret); + rxrpc_notify_socket(call); goto out; } _debug("need instant resend %d", ret); -- cgit From df612421fe2566654047769c6852ffae1a31df16 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 24 Jul 2019 12:46:34 -0700 Subject: mwifiex: fix 802.11n/WPA detection Commit 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant vendor IEs") adjusted the ieee_types_vendor_header struct, which inadvertently messed up the offsets used in mwifiex_is_wpa_oui_present(). Add that offset back in, mirroring mwifiex_is_rsn_oui_present(). As it stands, commit 63d7ef36103d breaks compatibility with WPA (not WPA2) 802.11n networks, since we hit the "info: Disable 11n if AES is not supported by AP" case in mwifiex_is_network_compatible(). Fixes: 63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant vendor IEs") Cc: Signed-off-by: Brian Norris Signed-off-by: Kalle Valo --- drivers/net/wireless/marvell/mwifiex/main.h | 1 + drivers/net/wireless/marvell/mwifiex/scan.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/marvell/mwifiex/main.h b/drivers/net/wireless/marvell/mwifiex/main.h index 3e442c7f7882..095837fba300 100644 --- a/drivers/net/wireless/marvell/mwifiex/main.h +++ b/drivers/net/wireless/marvell/mwifiex/main.h @@ -124,6 +124,7 @@ enum { #define MWIFIEX_MAX_TOTAL_SCAN_TIME (MWIFIEX_TIMER_10S - MWIFIEX_TIMER_1S) +#define WPA_GTK_OUI_OFFSET 2 #define RSN_GTK_OUI_OFFSET 2 #define MWIFIEX_OUI_NOT_PRESENT 0 diff --git a/drivers/net/wireless/marvell/mwifiex/scan.c b/drivers/net/wireless/marvell/mwifiex/scan.c index 0d6d41727037..21dda385f6c6 100644 --- a/drivers/net/wireless/marvell/mwifiex/scan.c +++ b/drivers/net/wireless/marvell/mwifiex/scan.c @@ -181,7 +181,8 @@ mwifiex_is_wpa_oui_present(struct mwifiex_bssdescriptor *bss_desc, u32 cipher) u8 ret = MWIFIEX_OUI_NOT_PRESENT; if (has_vendor_hdr(bss_desc->bcn_wpa_ie, WLAN_EID_VENDOR_SPECIFIC)) { - iebody = (struct ie_body *) bss_desc->bcn_wpa_ie->data; + iebody = (struct ie_body *)((u8 *)bss_desc->bcn_wpa_ie->data + + WPA_GTK_OUI_OFFSET); oui = &mwifiex_wpa_oui[cipher][0]; ret = mwifiex_search_oui_in_ie(iebody, oui); if (ret) -- cgit From 81eaadcae81b4c1bf01649a3053d1f54e2d81cf1 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Thu, 25 Jul 2019 11:35:51 -0700 Subject: kgdboc: disable the console lock when in kgdb After commit ddde3c18b700 ("vt: More locking checks") kdb / kgdb has become useless because my console is filled with spews of: WARNING: CPU: 0 PID: 0 at .../drivers/tty/vt/vt.c:3846 con_is_visible+0x50/0x74 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc1+ #48 Hardware name: Rockchip (Device Tree) Backtrace: [] (dump_backtrace) from [] (show_stack+0x20/0x24) [] (show_stack) from [] (dump_stack+0xb0/0xd0) [] (dump_stack) from [] (__warn+0xec/0x11c) [] (__warn) from [] (warn_slowpath_null+0x4c/0x58) [] (warn_slowpath_null) from [] (con_is_visible+0x50/0x74) [] (con_is_visible) from [] (con_scroll+0x108/0x1ac) [] (con_scroll) from [] (lf+0x44/0x88) [] (lf) from [] (vt_console_print+0x1a4/0x2bc) [] (vt_console_print) from [] (vkdb_printf+0x420/0x8a4) [] (vkdb_printf) from [] (kdb_printf+0x44/0x60) [] (kdb_printf) from [] (kdb_main_loop+0xf4/0x6e0) [] (kdb_main_loop) from [] (kdb_stub+0x268/0x398) [] (kdb_stub) from [] (kgdb_cpu_enter+0x1f8/0x674) [] (kgdb_cpu_enter) from [] (kgdb_handle_exception+0x1c4/0x1fc) [] (kgdb_handle_exception) from [] (kgdb_compiled_brk_fn+0x30/0x3c) [] (kgdb_compiled_brk_fn) from [] (do_undefinstr+0x180/0x1a0) [] (do_undefinstr) from [] (__und_svc_finish+0x0/0x3c) ... [] (kgdb_breakpoint) from [] (sysrq_handle_dbg+0x58/0x6c) [] (sysrq_handle_dbg) from [] (__handle_sysrq+0xac/0x154) Let's disable this warning when we're in kgdb to avoid the spew. The whole system is stopped when we're in kgdb so we can't exactly wait for someone else to drop the lock. Presumably the best we can do is to disable the warning and hope for the best. Fixes: ddde3c18b700 ("vt: More locking checks") Cc: Daniel Vetter Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20190725183551.169208-1-dianders@chromium.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/kgdboc.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c index bfe5e9e034ec..c7d51b51898f 100644 --- a/drivers/tty/serial/kgdboc.c +++ b/drivers/tty/serial/kgdboc.c @@ -277,10 +277,14 @@ static void kgdboc_pre_exp_handler(void) /* Increment the module count when the debugger is active */ if (!kgdb_connected) try_module_get(THIS_MODULE); + + atomic_inc(&ignore_console_lock_warning); } static void kgdboc_post_exp_handler(void) { + atomic_dec(&ignore_console_lock_warning); + /* decrement the module count when the debugger detaches */ if (!kgdb_connected) module_put(THIS_MODULE); -- cgit From 92f5b0313e37e2b37aaf8f0bb75b6c50eafb5808 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 26 Jul 2019 10:01:07 -0400 Subject: media: vivid: fix missing cec adapter name Commit "vivid: reorder CEC allocation and control set-up" missed that the CEC adapter needs a valid vfd->name, and that was now filled in after the CEC adapter was created, leading to an empty adapter name. Fill in the name earlier. Signed-off-by: Hans Verkuil Fixes: 4ee895e71abb ("media: vivid: reorder CEC allocation and control set-up") Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/vivid/vivid-core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/media/platform/vivid/vivid-core.c b/drivers/media/platform/vivid/vivid-core.c index bc2a176937a4..d535aac68ce1 100644 --- a/drivers/media/platform/vivid/vivid-core.c +++ b/drivers/media/platform/vivid/vivid-core.c @@ -1099,6 +1099,8 @@ static int vivid_create_instance(struct platform_device *pdev, int inst) /* start creating the vb2 queues */ if (dev->has_vid_cap) { + snprintf(dev->vid_cap_dev.name, sizeof(dev->vid_cap_dev.name), + "vivid-%03d-vid-cap", inst); /* initialize vid_cap queue */ q = &dev->vb_vid_cap_q; q->type = dev->multiplanar ? V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE : @@ -1122,6 +1124,8 @@ static int vivid_create_instance(struct platform_device *pdev, int inst) } if (dev->has_vid_out) { + snprintf(dev->vid_out_dev.name, sizeof(dev->vid_out_dev.name), + "vivid-%03d-vid-out", inst); /* initialize vid_out queue */ q = &dev->vb_vid_out_q; q->type = dev->multiplanar ? V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE : @@ -1265,8 +1269,6 @@ static int vivid_create_instance(struct platform_device *pdev, int inst) /* finally start creating the device nodes */ if (dev->has_vid_cap) { vfd = &dev->vid_cap_dev; - snprintf(vfd->name, sizeof(vfd->name), - "vivid-%03d-vid-cap", inst); vfd->fops = &vivid_fops; vfd->ioctl_ops = &vivid_ioctl_ops; vfd->device_caps = dev->vid_cap_caps; @@ -1312,8 +1314,6 @@ static int vivid_create_instance(struct platform_device *pdev, int inst) if (dev->has_vid_out) { vfd = &dev->vid_out_dev; - snprintf(vfd->name, sizeof(vfd->name), - "vivid-%03d-vid-out", inst); vfd->vfl_dir = VFL_DIR_TX; vfd->fops = &vivid_fops; vfd->ioctl_ops = &vivid_ioctl_ops; -- cgit From 5241ab4cf42d3a93b933b55d3d53f43049081fa1 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 29 Jul 2019 18:15:17 +0900 Subject: kbuild: initialize CLANG_FLAGS correctly in the top Makefile CLANG_FLAGS is initialized by the following line: CLANG_FLAGS := --target=$(notdir $(CROSS_COMPILE:%-=%)) ..., which is run only when CROSS_COMPILE is set. Some build targets (bindeb-pkg etc.) recurse to the top Makefile. When you build the kernel with Clang but without CROSS_COMPILE, the same compiler flags such as -no-integrated-as are accumulated into CLANG_FLAGS. If you run 'make CC=clang' and then 'make CC=clang bindeb-pkg', Kbuild will recompile everything needlessly due to the build command change. Fix this by correctly initializing CLANG_FLAGS. Fixes: 238bcbc4e07f ("kbuild: consolidate Clang compiler flags") Cc: # v5.0+ Signed-off-by: Masahiro Yamada Reviewed-by: Nathan Chancellor Acked-by: Nick Desaulniers --- Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Makefile b/Makefile index fa0fbe7851ea..5ee6f6889869 100644 --- a/Makefile +++ b/Makefile @@ -472,6 +472,7 @@ KBUILD_CFLAGS_MODULE := -DMODULE KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds KBUILD_LDFLAGS := GCC_PLUGINS_CFLAGS := +CLANG_FLAGS := export ARCH SRCARCH CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC export CPP AR NM STRIP OBJCOPY OBJDUMP PAHOLE KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS @@ -519,7 +520,7 @@ endif ifneq ($(shell $(CC) --version 2>&1 | head -n 1 | grep clang),) ifneq ($(CROSS_COMPILE),) -CLANG_FLAGS := --target=$(notdir $(CROSS_COMPILE:%-=%)) +CLANG_FLAGS += --target=$(notdir $(CROSS_COMPILE:%-=%)) GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE)elfedit)) CLANG_FLAGS += --prefix=$(GCC_TOOLCHAIN_DIR) GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..) -- cgit From e70d8b287301eb6d7c7761c6171c56af62110ea3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 28 Jul 2019 18:42:55 +0200 Subject: nvmem: Use the same permissions for eeprom as for nvmem The compatibility "eeprom" attribute is currently root-only no matter what the configuration says. The "nvmem" attribute does respect the setting of the root_only configuration bit, so do the same for "eeprom". Signed-off-by: Jean Delvare Fixes: b6c217ab9be6 ("nvmem: Add backwards compatibility support for older EEPROM drivers.") Reviewed-by: Bartosz Golaszewski Cc: Andrew Lunn Cc: Srinivas Kandagatla Cc: Arnd Bergmann Link: https://lore.kernel.org/r/20190728184255.563332e6@endymion Signed-off-by: Greg Kroah-Hartman --- drivers/nvmem/nvmem-sysfs.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/drivers/nvmem/nvmem-sysfs.c b/drivers/nvmem/nvmem-sysfs.c index 6f303b91f6e7..9e0c429cd08a 100644 --- a/drivers/nvmem/nvmem-sysfs.c +++ b/drivers/nvmem/nvmem-sysfs.c @@ -224,10 +224,17 @@ int nvmem_sysfs_setup_compat(struct nvmem_device *nvmem, if (!config->base_dev) return -EINVAL; - if (nvmem->read_only) - nvmem->eeprom = bin_attr_ro_root_nvmem; - else - nvmem->eeprom = bin_attr_rw_root_nvmem; + if (nvmem->read_only) { + if (config->root_only) + nvmem->eeprom = bin_attr_ro_root_nvmem; + else + nvmem->eeprom = bin_attr_ro_nvmem; + } else { + if (config->root_only) + nvmem->eeprom = bin_attr_rw_root_nvmem; + else + nvmem->eeprom = bin_attr_rw_nvmem; + } nvmem->eeprom.attr.name = "eeprom"; nvmem->eeprom.size = nvmem->size; #ifdef CONFIG_DEBUG_LOCK_ALLOC -- cgit From b4f9a1a87a48c255bb90d8a6c3d555a1abb88130 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Wed, 17 Jul 2019 13:23:39 +0100 Subject: Btrfs: fix incremental send failure after deduplication When doing an incremental send operation we can fail if we previously did deduplication operations against a file that exists in both snapshots. In that case we will fail the send operation with -EIO and print a message to dmesg/syslog like the following: BTRFS error (device sdc): Send: inconsistent snapshot, found updated \ extent for inode 257 without updated inode item, send root is 258, \ parent root is 257 This requires that we deduplicate to the same file in both snapshots for the same amount of times on each snapshot. The issue happens because a deduplication only updates the iversion of an inode and does not update any other field of the inode, therefore if we deduplicate the file on each snapshot for the same amount of time, the inode will have the same iversion value (stored as the "sequence" field on the inode item) on both snapshots, therefore it will be seen as unchanged between in the send snapshot while there are new/updated/deleted extent items when comparing to the parent snapshot. This makes the send operation return -EIO and print an error message. Example reproducer: $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt # Create our first file. The first half of the file has several 64Kb # extents while the second half as a single 512Kb extent. $ xfs_io -f -s -c "pwrite -S 0xb8 -b 64K 0 512K" /mnt/foo $ xfs_io -c "pwrite -S 0xb8 512K 512K" /mnt/foo # Create the base snapshot and the parent send stream from it. $ btrfs subvolume snapshot -r /mnt /mnt/mysnap1 $ btrfs send -f /tmp/1.snap /mnt/mysnap1 # Create our second file, that has exactly the same data as the first # file. $ xfs_io -f -c "pwrite -S 0xb8 0 1M" /mnt/bar # Create the second snapshot, used for the incremental send, before # doing the file deduplication. $ btrfs subvolume snapshot -r /mnt /mnt/mysnap2 # Now before creating the incremental send stream: # # 1) Deduplicate into a subrange of file foo in snapshot mysnap1. This # will drop several extent items and add a new one, also updating # the inode's iversion (sequence field in inode item) by 1, but not # any other field of the inode; # # 2) Deduplicate into a different subrange of file foo in snapshot # mysnap2. This will replace an extent item with a new one, also # updating the inode's iversion by 1 but not any other field of the # inode. # # After these two deduplication operations, the inode items, for file # foo, are identical in both snapshots, but we have different extent # items for this inode in both snapshots. We want to check this doesn't # cause send to fail with an error or produce an incorrect stream. $ xfs_io -r -c "dedupe /mnt/bar 0 0 512K" /mnt/mysnap1/foo $ xfs_io -r -c "dedupe /mnt/bar 512K 512K 512K" /mnt/mysnap2/foo # Create the incremental send stream. $ btrfs send -p /mnt/mysnap1 -f /tmp/2.snap /mnt/mysnap2 ERROR: send ioctl failed with -5: Input/output error This issue started happening back in 2015 when deduplication was updated to not update the inode's ctime and mtime and update only the iversion. Back then we would hit a BUG_ON() in send, but later in 2016 send was updated to return -EIO and print the error message instead of doing the BUG_ON(). A test case for fstests follows soon. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203933 Fixes: 1c919a5e13702c ("btrfs: don't update mtime/ctime on deduped inodes") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/send.c | 77 +++++++++++---------------------------------------------- 1 file changed, 15 insertions(+), 62 deletions(-) diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c index 69b59bf75882..c3c0c064c25d 100644 --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -6322,68 +6322,21 @@ static int changed_extent(struct send_ctx *sctx, { int ret = 0; - if (sctx->cur_ino != sctx->cmp_key->objectid) { - - if (result == BTRFS_COMPARE_TREE_CHANGED) { - struct extent_buffer *leaf_l; - struct extent_buffer *leaf_r; - struct btrfs_file_extent_item *ei_l; - struct btrfs_file_extent_item *ei_r; - - leaf_l = sctx->left_path->nodes[0]; - leaf_r = sctx->right_path->nodes[0]; - ei_l = btrfs_item_ptr(leaf_l, - sctx->left_path->slots[0], - struct btrfs_file_extent_item); - ei_r = btrfs_item_ptr(leaf_r, - sctx->right_path->slots[0], - struct btrfs_file_extent_item); - - /* - * We may have found an extent item that has changed - * only its disk_bytenr field and the corresponding - * inode item was not updated. This case happens due to - * very specific timings during relocation when a leaf - * that contains file extent items is COWed while - * relocation is ongoing and its in the stage where it - * updates data pointers. So when this happens we can - * safely ignore it since we know it's the same extent, - * but just at different logical and physical locations - * (when an extent is fully replaced with a new one, we - * know the generation number must have changed too, - * since snapshot creation implies committing the current - * transaction, and the inode item must have been updated - * as well). - * This replacement of the disk_bytenr happens at - * relocation.c:replace_file_extents() through - * relocation.c:btrfs_reloc_cow_block(). - */ - if (btrfs_file_extent_generation(leaf_l, ei_l) == - btrfs_file_extent_generation(leaf_r, ei_r) && - btrfs_file_extent_ram_bytes(leaf_l, ei_l) == - btrfs_file_extent_ram_bytes(leaf_r, ei_r) && - btrfs_file_extent_compression(leaf_l, ei_l) == - btrfs_file_extent_compression(leaf_r, ei_r) && - btrfs_file_extent_encryption(leaf_l, ei_l) == - btrfs_file_extent_encryption(leaf_r, ei_r) && - btrfs_file_extent_other_encoding(leaf_l, ei_l) == - btrfs_file_extent_other_encoding(leaf_r, ei_r) && - btrfs_file_extent_type(leaf_l, ei_l) == - btrfs_file_extent_type(leaf_r, ei_r) && - btrfs_file_extent_disk_bytenr(leaf_l, ei_l) != - btrfs_file_extent_disk_bytenr(leaf_r, ei_r) && - btrfs_file_extent_disk_num_bytes(leaf_l, ei_l) == - btrfs_file_extent_disk_num_bytes(leaf_r, ei_r) && - btrfs_file_extent_offset(leaf_l, ei_l) == - btrfs_file_extent_offset(leaf_r, ei_r) && - btrfs_file_extent_num_bytes(leaf_l, ei_l) == - btrfs_file_extent_num_bytes(leaf_r, ei_r)) - return 0; - } - - inconsistent_snapshot_error(sctx, result, "extent"); - return -EIO; - } + /* + * We have found an extent item that changed without the inode item + * having changed. This can happen either after relocation (where the + * disk_bytenr of an extent item is replaced at + * relocation.c:replace_file_extents()) or after deduplication into a + * file in both the parent and send snapshots (where an extent item can + * get modified or replaced with a new one). Note that deduplication + * updates the inode item, but it only changes the iversion (sequence + * field in the inode item) of the inode, so if a file is deduplicated + * the same amount of times in both the parent and send snapshots, its + * iversion becames the same in both snapshots, whence the inode item is + * the same on both snapshots. + */ + if (sctx->cur_ino != sctx->cmp_key->objectid) + return 0; if (!sctx->cur_inode_new_gen && !sctx->cur_inode_deleted) { if (result != BTRFS_COMPARE_TREE_DELETED) -- cgit From cb2d3daddbfb6318d170e79aac1f7d5e4d49f0d7 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Thu, 25 Jul 2019 11:27:04 +0100 Subject: Btrfs: fix race leading to fs corruption after transaction abort When one transaction is finishing its commit, it is possible for another transaction to start and enter its initial commit phase as well. If the first ends up getting aborted, we have a small time window where the second transaction commit does not notice that the previous transaction aborted and ends up committing, writing a superblock that points to btrees that reference extent buffers (nodes and leafs) that were not persisted to disk. The consequence is that after mounting the filesystem again, we will be unable to load some btree nodes/leafs, either because the content on disk is either garbage (or just zeroes) or corresponds to the old content of a previouly COWed or deleted node/leaf, resulting in the well known error messages "parent transid verify failed on ...". The following sequence diagram illustrates how this can happen. CPU 1 CPU 2 btrfs_commit_transaction() (...) --> sets transaction state to TRANS_STATE_UNBLOCKED --> sets fs_info->running_transaction to NULL (...) btrfs_start_transaction() start_transaction() wait_current_trans() --> returns immediately because fs_info->running_transaction is NULL join_transaction() --> creates transaction N + 1 --> sets fs_info->running_transaction to transaction N + 1 --> adds transaction N + 1 to the fs_info->trans_list list --> returns transaction handle pointing to the new transaction N + 1 (...) btrfs_sync_file() btrfs_start_transaction() --> returns handle to transaction N + 1 (...) btrfs_write_and_wait_transaction() --> writeback of some extent buffer fails, returns an error btrfs_handle_fs_error() --> sets BTRFS_FS_STATE_ERROR in fs_info->fs_state --> jumps to label "scrub_continue" cleanup_transaction() btrfs_abort_transaction(N) --> sets BTRFS_FS_STATE_TRANS_ABORTED flag in fs_info->fs_state --> sets aborted field in the transaction and transaction handle structures, for transaction N only --> removes transaction from the list fs_info->trans_list btrfs_commit_transaction(N + 1) --> transaction N + 1 was not aborted, so it proceeds (...) --> sets the transaction's state to TRANS_STATE_COMMIT_START --> does not find the previous transaction (N) in the fs_info->trans_list, so it doesn't know that transaction was aborted, and the commit of transaction N + 1 proceeds (...) --> sets transaction N + 1 state to TRANS_STATE_UNBLOCKED btrfs_write_and_wait_transaction() --> succeeds writing all extent buffers created in the transaction N + 1 write_all_supers() --> succeeds --> we now have a superblock on disk that points to trees that refer to at least one extent buffer that was never persisted So fix this by updating the transaction commit path to check if the flag BTRFS_FS_STATE_TRANS_ABORTED is set on fs_info->fs_state if after setting the transaction to the TRANS_STATE_COMMIT_START we do not find any previous transaction in the fs_info->trans_list. If the flag is set, just fail the transaction commit with -EROFS, as we do in other places. The exact error code for the previous transaction abort was already logged and reported. Fixes: 49b25e0540904b ("btrfs: enhance transaction abort infrastructure") CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/transaction.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 3b8ae1a8f02d..39b7bcde3c6f 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -2037,6 +2037,16 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans) } } else { spin_unlock(&fs_info->trans_lock); + /* + * The previous transaction was aborted and was already removed + * from the list of transactions at fs_info->trans_list. So we + * abort to prevent writing a new superblock that reflects a + * corrupt state (pointing to trees with unwritten nodes/leafs). + */ + if (test_bit(BTRFS_FS_STATE_TRANS_ABORTED, &fs_info->fs_state)) { + ret = -EROFS; + goto cleanup_transaction; + } } extwriter_counter_dec(cur_trans, trans->type); -- cgit From a6d155d2e363f26290ffd50591169cb96c2a609e Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Mon, 29 Jul 2019 09:37:10 +0100 Subject: Btrfs: fix deadlock between fiemap and transaction commits The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/backref.c | 2 +- fs/btrfs/transaction.c | 22 ++++++++++++++++++---- fs/btrfs/transaction.h | 3 +++ 3 files changed, 22 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index 89116afda7a2..e5d85311d5d5 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -1483,7 +1483,7 @@ int btrfs_check_shared(struct btrfs_root *root, u64 inum, u64 bytenr, ulist_init(roots); ulist_init(tmp); - trans = btrfs_attach_transaction(root); + trans = btrfs_join_transaction_nostart(root); if (IS_ERR(trans)) { if (PTR_ERR(trans) != -ENOENT && PTR_ERR(trans) != -EROFS) { ret = PTR_ERR(trans); diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 39b7bcde3c6f..e3adb714c04b 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -28,15 +28,18 @@ static const unsigned int btrfs_blocked_trans_types[TRANS_STATE_MAX] = { [TRANS_STATE_COMMIT_START] = (__TRANS_START | __TRANS_ATTACH), [TRANS_STATE_COMMIT_DOING] = (__TRANS_START | __TRANS_ATTACH | - __TRANS_JOIN), + __TRANS_JOIN | + __TRANS_JOIN_NOSTART), [TRANS_STATE_UNBLOCKED] = (__TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | - __TRANS_JOIN_NOLOCK), + __TRANS_JOIN_NOLOCK | + __TRANS_JOIN_NOSTART), [TRANS_STATE_COMPLETED] = (__TRANS_START | __TRANS_ATTACH | __TRANS_JOIN | - __TRANS_JOIN_NOLOCK), + __TRANS_JOIN_NOLOCK | + __TRANS_JOIN_NOSTART), }; void btrfs_put_transaction(struct btrfs_transaction *transaction) @@ -543,7 +546,8 @@ again: ret = join_transaction(fs_info, type); if (ret == -EBUSY) { wait_current_trans(fs_info); - if (unlikely(type == TRANS_ATTACH)) + if (unlikely(type == TRANS_ATTACH || + type == TRANS_JOIN_NOSTART)) ret = -ENOENT; } } while (ret == -EBUSY); @@ -659,6 +663,16 @@ struct btrfs_trans_handle *btrfs_join_transaction_nolock(struct btrfs_root *root BTRFS_RESERVE_NO_FLUSH, true); } +/* + * Similar to regular join but it never starts a transaction when none is + * running or after waiting for the current one to finish. + */ +struct btrfs_trans_handle *btrfs_join_transaction_nostart(struct btrfs_root *root) +{ + return start_transaction(root, 0, TRANS_JOIN_NOSTART, + BTRFS_RESERVE_NO_FLUSH, true); +} + /* * btrfs_attach_transaction() - catch the running transaction * diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h index 527ea94b57d9..2c5a6f6e5bb0 100644 --- a/fs/btrfs/transaction.h +++ b/fs/btrfs/transaction.h @@ -94,11 +94,13 @@ struct btrfs_transaction { #define __TRANS_JOIN (1U << 11) #define __TRANS_JOIN_NOLOCK (1U << 12) #define __TRANS_DUMMY (1U << 13) +#define __TRANS_JOIN_NOSTART (1U << 14) #define TRANS_START (__TRANS_START | __TRANS_FREEZABLE) #define TRANS_ATTACH (__TRANS_ATTACH) #define TRANS_JOIN (__TRANS_JOIN | __TRANS_FREEZABLE) #define TRANS_JOIN_NOLOCK (__TRANS_JOIN_NOLOCK) +#define TRANS_JOIN_NOSTART (__TRANS_JOIN_NOSTART) #define TRANS_EXTWRITERS (__TRANS_START | __TRANS_ATTACH) @@ -183,6 +185,7 @@ struct btrfs_trans_handle *btrfs_start_transaction_fallback_global_rsv( int min_factor); struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root); struct btrfs_trans_handle *btrfs_join_transaction_nolock(struct btrfs_root *root); +struct btrfs_trans_handle *btrfs_join_transaction_nostart(struct btrfs_root *root); struct btrfs_trans_handle *btrfs_attach_transaction(struct btrfs_root *root); struct btrfs_trans_handle *btrfs_attach_transaction_barrier( struct btrfs_root *root); -- cgit From 1dd38ae96973006c45a8010a7fc3c313f1c229a9 Mon Sep 17 00:00:00 2001 From: Moritz Fischer Date: Thu, 25 Jul 2019 10:45:17 -0700 Subject: MAINTAINERS: Move linux-fpga tree to new location Move the linux-fpga tree to new location at: git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga.git Signed-off-by: Moritz Fischer Link: https://lore.kernel.org/r/20190725174517.10516-1-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 6426db5198f0..8af274c743de 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6339,7 +6339,7 @@ FPGA MANAGER FRAMEWORK M: Moritz Fischer L: linux-fpga@vger.kernel.org S: Maintained -T: git git://git.kernel.org/pub/scm/linux/kernel/git/atull/linux-fpga.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga.git Q: http://patchwork.kernel.org/project/linux-fpga/list/ F: Documentation/fpga/ F: Documentation/driver-api/fpga/ -- cgit From cfb21b11b891b08b79be07be57c40a85bb926668 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 12 Jun 2019 11:09:58 +0200 Subject: iwlwifi: mvm: disable TX-AMSDU on older NICs On older NICs, we occasionally see issues with A-MSDU support, where the commands in the FIFO get confused and then we see an assert EDC because the next command in the FIFO isn't TX. We've tried to isolate this issue and understand where it comes from, but haven't found any errors in building the A-MSDU in software. At least for now, disable A-MSDU support on older hardware so that users can use it again without fearing the assert. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=203315. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 55cd49ccbf0b..99fa440bc639 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -474,7 +474,19 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) ieee80211_hw_set(hw, SUPPORTS_VHT_EXT_NSS_BW); ieee80211_hw_set(hw, BUFF_MMPDU_TXQ); ieee80211_hw_set(hw, STA_MMPDU_TXQ); - ieee80211_hw_set(hw, TX_AMSDU); + /* + * On older devices, enabling TX A-MSDU occasionally leads to + * something getting messed up, the command read from the FIFO + * gets out of sync and isn't a TX command, so that we have an + * assert EDC. + * + * It's not clear where the bug is, but since we didn't used to + * support A-MSDU until moving the mac80211 iTXQs, just leave it + * for older devices. We also don't see this issue on any newer + * devices. + */ + if (mvm->cfg->device_family >= IWL_DEVICE_FAMILY_9000) + ieee80211_hw_set(hw, TX_AMSDU); ieee80211_hw_set(hw, TX_FRAG_LIST); if (iwl_mvm_has_tlc_offload(mvm)) { -- cgit From 0f8084cdc1f9d4a6693ef4168167febb0918c6f6 Mon Sep 17 00:00:00 2001 From: Mordechay Goodstein Date: Thu, 13 Jun 2019 16:34:07 +0300 Subject: iwlwifi: mvm: avoid races in rate init and rate perform Rate perform uses the lq_sta table to calculate the next rate to scale while rate init resets the same table, Rate perform is done in soft irq context in parallel to rate init that can be called in case we are doing changes like AP changes BW or moving state for auth to assoc. Signed-off-by: Mordechay Goodstein Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 42 +++++++++++++++++++++++++--- drivers/net/wireless/intel/iwlwifi/mvm/rs.h | 7 ++++- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 6 ++++ drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 1 + 4 files changed, 51 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c index 8c9069f28a58..02b4ef92543f 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c @@ -1197,6 +1197,27 @@ static u8 rs_get_tid(struct ieee80211_hdr *hdr) return tid; } +void iwl_mvm_rs_init_wk(struct work_struct *wk) +{ + struct iwl_mvm_sta *mvmsta = container_of(wk, struct iwl_mvm_sta, + rs_init_wk); + struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(mvmsta->vif); + struct ieee80211_sta *sta; + + rcu_read_lock(); + + sta = rcu_dereference(mvmvif->mvm->fw_id_to_mac_id[mvmsta->sta_id]); + if (WARN_ON_ONCE(IS_ERR_OR_NULL(sta))) { + rcu_read_unlock(); + return; + } + + iwl_mvm_rs_rate_init(mvmvif->mvm, sta, mvmvif->phy_ctxt->channel->band, + true); + + rcu_read_unlock(); +} + void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, int tid, struct ieee80211_tx_info *info, bool ndp) { @@ -1269,7 +1290,7 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, (unsigned long)(lq_sta->last_tx + (IWL_MVM_RS_IDLE_TIMEOUT * HZ)))) { IWL_DEBUG_RATE(mvm, "Tx idle for too long. reinit rs\n"); - iwl_mvm_rs_rate_init(mvm, sta, info->band, true); + schedule_work(&mvmsta->rs_init_wk); return; } lq_sta->last_tx = jiffies; @@ -1442,16 +1463,24 @@ static void rs_drv_mac80211_tx_status(void *mvm_r, struct iwl_op_mode *op_mode = mvm_r; struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); - if (!iwl_mvm_sta_from_mac80211(sta)->vif) + if (!mvmsta->vif) return; if (!ieee80211_is_data(hdr->frame_control) || info->flags & IEEE80211_TX_CTL_NO_ACK) return; + /* If it's locked we are in middle of init flow + * just wait for next tx status to update the lq_sta data + */ + if (!mutex_trylock(&mvmsta->lq_sta.rs_drv.mutex)) + return; + iwl_mvm_rs_tx_status(mvm, sta, rs_get_tid(hdr), info, ieee80211_is_qos_nullfunc(hdr->frame_control)); + mutex_unlock(&mvmsta->lq_sta.rs_drv.mutex); } /* @@ -4132,10 +4161,15 @@ static const struct rate_control_ops rs_mvm_ops_drv = { void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, enum nl80211_band band, bool update) { - if (iwl_mvm_has_tlc_offload(mvm)) + if (iwl_mvm_has_tlc_offload(mvm)) { rs_fw_rate_init(mvm, sta, band, update); - else + } else { + struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); + + mutex_lock(&mvmsta->lq_sta.rs_drv.mutex); rs_drv_rate_init(mvm, sta, band, update); + mutex_unlock(&mvmsta->lq_sta.rs_drv.mutex); + } } int iwl_mvm_rate_control_register(void) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.h b/drivers/net/wireless/intel/iwlwifi/mvm/rs.h index f7eb60dbaf20..086f47e2a4f0 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.h @@ -4,7 +4,7 @@ * Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2015 Intel Mobile Communications GmbH * Copyright(c) 2017 Intel Deutschland GmbH - * Copyright(c) 2018 Intel Corporation + * Copyright(c) 2018 - 2019 Intel Corporation * * Contact Information: * Intel Linux Wireless @@ -376,6 +376,9 @@ struct iwl_lq_sta { /* tx power reduce for this sta */ int tpc_reduce; + /* avoid races of reinit and update table from rx_tx */ + struct mutex mutex; + /* persistent fields - initialized only once - keep last! */ struct lq_sta_pers { #ifdef CONFIG_MAC80211_DEBUGFS @@ -440,6 +443,8 @@ struct iwl_mvm_sta; int iwl_mvm_tx_protection(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, bool enable); +void iwl_mvm_rs_init_wk(struct work_struct *wk); + #ifdef CONFIG_IWLWIFI_DEBUGFS void iwl_mvm_reset_frame_stats(struct iwl_mvm *mvm); #endif diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index f545a737a92d..ac9bc65c4d15 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1684,6 +1684,10 @@ int iwl_mvm_add_sta(struct iwl_mvm *mvm, */ if (iwl_mvm_has_tlc_offload(mvm)) iwl_mvm_rs_add_sta(mvm, mvm_sta); + else + mutex_init(&mvm_sta->lq_sta.rs_drv.mutex); + + INIT_WORK(&mvm_sta->rs_init_wk, iwl_mvm_rs_init_wk); iwl_mvm_toggle_tx_ant(mvm, &mvm_sta->tx_ant); @@ -1846,6 +1850,8 @@ int iwl_mvm_rm_sta(struct iwl_mvm *mvm, if (ret) return ret; + cancel_work_sync(&mvm_sta->rs_init_wk); + /* flush its queues here since we are freeing mvm_sta */ ret = iwl_mvm_flush_sta(mvm, mvm_sta, false, 0); if (ret) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h index 4487cc3e07c1..84139fc38c34 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h @@ -424,6 +424,7 @@ struct iwl_mvm_sta { struct iwl_lq_sta_rs_fw rs_fw; struct iwl_lq_sta rs_drv; } lq_sta; + struct work_struct rs_init_wk; struct ieee80211_vif *vif; struct iwl_mvm_key_pn __rcu *ptk_pn[4]; struct iwl_mvm_rxq_dup_data *dup_data; -- cgit From 39bd984c203e86f3109b49c2a2e20677c4d3ab65 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Mon, 24 Jun 2019 22:29:33 +0300 Subject: iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT on version < 41 Firmware versions before 41 don't support the GEO_TX_POWER_LIMIT command, and sending it to the firmware will cause a firmware crash. We allow this via debugfs, so we need to return an error value in case it's not supported. This had already been fixed during init, when we send the command if the ACPI WGDS table is present. Fix it also for the other, userspace-triggered case. Cc: stable@vger.kernel.org Fixes: 7fe90e0e3d60 ("iwlwifi: mvm: refactor geo init") Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c index 1d608e9e9101..a837cf40afde 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c @@ -880,6 +880,17 @@ int iwl_mvm_sar_select_profile(struct iwl_mvm *mvm, int prof_a, int prof_b) return iwl_mvm_send_cmd_pdu(mvm, REDUCE_TX_POWER_CMD, 0, len, &cmd); } +static bool iwl_mvm_sar_geo_support(struct iwl_mvm *mvm) +{ + /* + * The GEO_TX_POWER_LIMIT command is not supported on earlier + * firmware versions. Unfortunately, we don't have a TLV API + * flag to rely on, so rely on the major version which is in + * the first byte of ucode_ver. + */ + return IWL_UCODE_SERIAL(mvm->fw->ucode_ver) >= 41; +} + int iwl_mvm_get_sar_geo_profile(struct iwl_mvm *mvm) { struct iwl_geo_tx_power_profiles_resp *resp; @@ -909,6 +920,9 @@ int iwl_mvm_get_sar_geo_profile(struct iwl_mvm *mvm) .data = { data }, }; + if (!iwl_mvm_sar_geo_support(mvm)) + return -EOPNOTSUPP; + ret = iwl_mvm_send_cmd(mvm, &cmd); if (ret) { IWL_ERR(mvm, "Failed to get geographic profile info %d\n", ret); @@ -934,13 +948,7 @@ static int iwl_mvm_sar_geo_init(struct iwl_mvm *mvm) int ret, i, j; u16 cmd_wide_id = WIDE_ID(PHY_OPS_GROUP, GEO_TX_POWER_LIMIT); - /* - * This command is not supported on earlier firmware versions. - * Unfortunately, we don't have a TLV API flag to rely on, so - * rely on the major version which is in the first byte of - * ucode_ver. - */ - if (IWL_UCODE_SERIAL(mvm->fw->ucode_ver) < 41) + if (!iwl_mvm_sar_geo_support(mvm)) return 0; ret = iwl_mvm_sar_get_wgds_table(mvm); -- cgit From 6b2dbce549bb513316823af34e92f0bb2e0dbd55 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 24 Jun 2019 13:41:13 +0300 Subject: iwlwifi: mvm: prepare the ground for more RSS notifications We will need a new type of synchronization message going through all the RSS queues. Prepare the ground for this. Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 6 ++++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index ac9bc65c4d15..23fd3108adb9 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -2427,7 +2427,7 @@ int iwl_mvm_rm_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) static void iwl_mvm_sync_rxq_del_ba(struct iwl_mvm *mvm, u8 baid) { - struct iwl_mvm_delba_notif notif = { + struct iwl_mvm_rss_sync_notif notif = { .metadata.type = IWL_MVM_RXQ_NOTIF_DEL_BA, .metadata.sync = 1, .delba.baid = baid, diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h index 84139fc38c34..79d655b3fce0 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h @@ -343,9 +343,11 @@ struct iwl_mvm_delba_data { u32 baid; } __packed; -struct iwl_mvm_delba_notif { +struct iwl_mvm_rss_sync_notif { struct iwl_mvm_internal_rxq_notif metadata; - struct iwl_mvm_delba_data delba; + union { + struct iwl_mvm_delba_data delba; + }; } __packed; /** -- cgit From c61b655a88a54d8690c1e134c47bc3f6d40d2dc3 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 24 Jun 2019 13:57:34 +0300 Subject: iwlwifi: mvm: add a new RSS sync notification for NSSN sync We will soon be using a new notification that will be initiated by the driver, sent to the firmware and sent back to all the RSS queues by the firmware. This new notification will be useful to synchronize the NSSN across all the queues. For now, don't send the notification, just add the code to handle it. Later patch will add the code to actually send it. While at it, validate the baid coming from the firmware to avoid accessing an array with a bad index in the driver. Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/fw/api/rx.h | 2 + drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 4 +- drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 4 +- drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 84 ++++++++++++++++---------- drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 6 ++ 5 files changed, 64 insertions(+), 36 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h b/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h index d55312ef58c9..ed69eec4fcd9 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h @@ -812,10 +812,12 @@ struct iwl_rxq_sync_notification { * * @IWL_MVM_RXQ_EMPTY: empty sync notification * @IWL_MVM_RXQ_NOTIF_DEL_BA: notify RSS queues of delBA + * @IWL_MVM_RXQ_NSSN_SYNC: notify all the RSS queues with the new NSSN */ enum iwl_mvm_rxq_notif_type { IWL_MVM_RXQ_EMPTY, IWL_MVM_RXQ_NOTIF_DEL_BA, + IWL_MVM_RXQ_NSSN_SYNC, }; /** diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index 48c77af54e99..c1e8b4766b0c 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -1665,8 +1665,8 @@ void iwl_mvm_rx_frame_release(struct iwl_mvm *mvm, struct napi_struct *napi, struct iwl_rx_cmd_buffer *rxb, int queue); int iwl_mvm_notify_rx_queue(struct iwl_mvm *mvm, u32 rxq_mask, const u8 *data, u32 count); -void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, - int queue); +void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct napi_struct *napi, + struct iwl_rx_cmd_buffer *rxb, int queue); void iwl_mvm_rx_tx_cmd(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb); void iwl_mvm_mfu_assert_dump_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c index d7d6f3398f86..4888054dc3d8 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c @@ -1088,7 +1088,7 @@ static void iwl_mvm_rx_mq(struct iwl_op_mode *op_mode, iwl_mvm_rx_mpdu_mq(mvm, napi, rxb, 0); else if (unlikely(cmd == WIDE_ID(DATA_PATH_GROUP, RX_QUEUES_NOTIFICATION))) - iwl_mvm_rx_queue_notif(mvm, rxb, 0); + iwl_mvm_rx_queue_notif(mvm, napi, rxb, 0); else if (cmd == WIDE_ID(LEGACY_GROUP, FRAME_RELEASE)) iwl_mvm_rx_frame_release(mvm, napi, rxb, 0); else if (cmd == WIDE_ID(DATA_PATH_GROUP, RX_NO_DATA_NOTIF)) @@ -1812,7 +1812,7 @@ static void iwl_mvm_rx_mq_rss(struct iwl_op_mode *op_mode, iwl_mvm_rx_frame_release(mvm, napi, rxb, queue); else if (unlikely(cmd == WIDE_ID(DATA_PATH_GROUP, RX_QUEUES_NOTIFICATION))) - iwl_mvm_rx_queue_notif(mvm, rxb, queue); + iwl_mvm_rx_queue_notif(mvm, napi, rxb, queue); else if (likely(cmd == WIDE_ID(LEGACY_GROUP, REPLY_RX_MPDU_CMD))) iwl_mvm_rx_mpdu_mq(mvm, napi, rxb, queue); } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index 64f950501287..bf097329efa2 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -665,8 +665,51 @@ out: rcu_read_unlock(); } -void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, - int queue) +static void iwl_mvm_release_frames_from_notif(struct iwl_mvm *mvm, + struct napi_struct *napi, + u8 baid, u16 nssn, int queue) +{ + struct ieee80211_sta *sta; + struct iwl_mvm_reorder_buffer *reorder_buf; + struct iwl_mvm_baid_data *ba_data; + + IWL_DEBUG_HT(mvm, "Frame release notification for BAID %u, NSSN %d\n", + baid, nssn); + + if (WARN_ON_ONCE(baid == IWL_RX_REORDER_DATA_INVALID_BAID || + baid >= ARRAY_SIZE(mvm->baid_map))) + return; + + rcu_read_lock(); + + ba_data = rcu_dereference(mvm->baid_map[baid]); + if (WARN_ON_ONCE(!ba_data)) + goto out; + + sta = rcu_dereference(mvm->fw_id_to_mac_id[ba_data->sta_id]); + if (WARN_ON_ONCE(IS_ERR_OR_NULL(sta))) + goto out; + + reorder_buf = &ba_data->reorder_buf[queue]; + + spin_lock_bh(&reorder_buf->lock); + iwl_mvm_release_frames(mvm, sta, napi, ba_data, reorder_buf, nssn); + spin_unlock_bh(&reorder_buf->lock); + +out: + rcu_read_unlock(); +} + +static void iwl_mvm_nssn_sync(struct iwl_mvm *mvm, + struct napi_struct *napi, int queue, + const struct iwl_mvm_nssn_sync_data *data) +{ + iwl_mvm_release_frames_from_notif(mvm, napi, data->baid, + data->nssn, queue); +} + +void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct napi_struct *napi, + struct iwl_rx_cmd_buffer *rxb, int queue) { struct iwl_rx_packet *pkt = rxb_addr(rxb); struct iwl_rxq_sync_notification *notif; @@ -687,6 +730,10 @@ void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, case IWL_MVM_RXQ_NOTIF_DEL_BA: iwl_mvm_del_ba(mvm, queue, (void *)internal_notif->data); break; + case IWL_MVM_RXQ_NSSN_SYNC: + iwl_mvm_nssn_sync(mvm, napi, queue, + (void *)internal_notif->data); + break; default: WARN_ONCE(1, "Invalid identifier %d", internal_notif->type); } @@ -1840,40 +1887,13 @@ void iwl_mvm_rx_monitor_no_data(struct iwl_mvm *mvm, struct napi_struct *napi, out: rcu_read_unlock(); } + void iwl_mvm_rx_frame_release(struct iwl_mvm *mvm, struct napi_struct *napi, struct iwl_rx_cmd_buffer *rxb, int queue) { struct iwl_rx_packet *pkt = rxb_addr(rxb); struct iwl_frame_release *release = (void *)pkt->data; - struct ieee80211_sta *sta; - struct iwl_mvm_reorder_buffer *reorder_buf; - struct iwl_mvm_baid_data *ba_data; - - int baid = release->baid; - IWL_DEBUG_HT(mvm, "Frame release notification for BAID %u, NSSN %d\n", - release->baid, le16_to_cpu(release->nssn)); - - if (WARN_ON_ONCE(baid == IWL_RX_REORDER_DATA_INVALID_BAID)) - return; - - rcu_read_lock(); - - ba_data = rcu_dereference(mvm->baid_map[baid]); - if (WARN_ON_ONCE(!ba_data)) - goto out; - - sta = rcu_dereference(mvm->fw_id_to_mac_id[ba_data->sta_id]); - if (WARN_ON_ONCE(IS_ERR_OR_NULL(sta))) - goto out; - - reorder_buf = &ba_data->reorder_buf[queue]; - - spin_lock_bh(&reorder_buf->lock); - iwl_mvm_release_frames(mvm, sta, napi, ba_data, reorder_buf, - le16_to_cpu(release->nssn)); - spin_unlock_bh(&reorder_buf->lock); - -out: - rcu_read_unlock(); + iwl_mvm_release_frames_from_notif(mvm, napi, release->baid, + le16_to_cpu(release->nssn), queue); } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h index 79d655b3fce0..4823c06e6909 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h @@ -343,10 +343,16 @@ struct iwl_mvm_delba_data { u32 baid; } __packed; +struct iwl_mvm_nssn_sync_data { + u32 baid; + u32 nssn; +} __packed; + struct iwl_mvm_rss_sync_notif { struct iwl_mvm_internal_rxq_notif metadata; union { struct iwl_mvm_delba_data delba; + struct iwl_mvm_nssn_sync_data nssn_sync; }; } __packed; -- cgit From 521dc6c7c74e88fbd02947e4e50a5cb0d49b4395 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 25 Jun 2019 09:14:14 +0300 Subject: iwlwiif: mvm: refactor iwl_mvm_notify_rx_queue Instead of allocating memory for which we have an upper limit, use a small buffer on stack. Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/fw/api/rx.h | 1 - drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 17 +++++++++-------- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h b/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h index ed69eec4fcd9..9b0bb89599fc 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h @@ -776,7 +776,6 @@ struct iwl_rss_config_cmd { u8 indirection_table[IWL_RSS_INDIRECTION_TABLE_SIZE]; } __packed; /* RSS_CONFIG_CMD_API_S_VER_1 */ -#define IWL_MULTI_QUEUE_SYNC_MSG_MAX_SIZE 128 #define IWL_MULTI_QUEUE_SYNC_SENDER_POS 0 #define IWL_MULTI_QUEUE_SYNC_SENDER_MSK 0xf diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index bf097329efa2..16078aa7c95f 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -465,18 +465,20 @@ static bool iwl_mvm_is_dup(struct ieee80211_sta *sta, int queue, int iwl_mvm_notify_rx_queue(struct iwl_mvm *mvm, u32 rxq_mask, const u8 *data, u32 count) { - struct iwl_rxq_sync_cmd *cmd; + u8 buf[sizeof(struct iwl_rxq_sync_cmd) + + sizeof(struct iwl_mvm_rss_sync_notif)]; + struct iwl_rxq_sync_cmd *cmd = (void *)buf; u32 data_size = sizeof(*cmd) + count; int ret; - /* should be DWORD aligned */ - if (WARN_ON(count & 3 || count > IWL_MULTI_QUEUE_SYNC_MSG_MAX_SIZE)) + /* + * size must be a multiple of DWORD + * Ensure we don't overflow buf + */ + if (WARN_ON(count & 3 || + count > sizeof(struct iwl_mvm_rss_sync_notif))) return -EINVAL; - cmd = kzalloc(data_size, GFP_KERNEL); - if (!cmd) - return -ENOMEM; - cmd->rxq_mask = cpu_to_le32(rxq_mask); cmd->count = cpu_to_le32(count); cmd->flags = 0; @@ -487,7 +489,6 @@ int iwl_mvm_notify_rx_queue(struct iwl_mvm *mvm, u32 rxq_mask, TRIGGER_RX_QUEUES_NOTIF_CMD), 0, data_size, cmd); - kfree(cmd); return ret; } -- cgit From 3c514bf831ac12356b695ff054bef641b9e99593 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 24 Jun 2019 16:26:24 +0300 Subject: iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues In order to support MSI-X efficiently, we want to avoid communication across Rx queues. Each Rx queue should have all the data it needs to process a packet. The reordering buffer is a challenge in the MSI-X world since we can have a single BA session whose packets are directed to different queues. This is why each queue has its own reordering buffer. The hardware is able to hint the driver whether we have a hole or not, which allows the driver to know whether it can release a packet or not. This indication is called NSSN. Roughly, if the packet's SN is lower than the NSSN, we can release the packet to the stack. The NSSN is the SN of the newest packet received without any holes + 1. This is working as long as we don't have packets that we release because of a timeout. When that happens, we could have taken the decision to release a packet after we have been waiting for its predecessor for too long. If this predecessor comes later, we have to drop it because we can't release packets out of order. In that case, the hardware will give us an indication that we can we release the packet (SN < NSSN), but the packet still needs to be dropped. This is why we sometimes need to ignore the NSSN and we track the head_sn in software. Here is a specific example of this: 1) Rx queue 1 got packets: 480, 482, 483 2) We release 480 to to the stack and wait for 481 3) NSSN is now 481 4) The timeout expires 5) We release 482 and 483, NSSN is still 480 6) 481 arrives its NSSN is 484. We need to drop 481 even if 481 < 484. This is why we'll update the head_sn to 484 at step 2. The flow now is: 1) Rx queue 1 got packets: 480, 482, 483 2) We release 480 to to the stack and wait for 481 3) NSSN is now 481 / head_sn is 481 4) The timeout expires 5) We release 482 and 483, NSSN is still 480 but head_sn is 484. 6) 481 arrives its NSSN is 484, but head_sn is 484 and we drop it. This code introduces another problem in case all the traffic goes well (no hole, no timeout): Rx queue 1: 0 -> 483 (head_sn = 484) Rx queue 2: 501 -> 4095 (head_sn = 0) Rx queue 2: 0 -> 480 (head_sn = 481) Rx queue 1: 481 but head_sn = 484 and we drop it. At this point, the SN of queue 1 is far behind: more than 4040 packets behind. Queue 1 will consider 481 "old" because 481 is in [501-64:501] whereas it is a very new packet. In order to fix that, send an Rx notification from time to time (twice across the full set of 4096 packets) to make sure no Rx queue is lagging too far behind. What will happen then is: Rx queue 1: 0 -> 483 (head_sn = 484) Rx queue 2: 501 -> 2047 (head_sn = 2048) Rx queue 1: Sync nofication (head_sn = 2048) Rx queue 2: 2048 -> 4095 (head_sn = 0) Rx queue 1: Sync notification (head_sn = 0) Rx queue 2: 1 -> 481 (head_sn = 482) Rx queue 1: 481 and head_sn = 0. In queue 1's data, head_sn is now 0, the packet coming in is 481, it'll understand that the new packet is new and it won't be dropped. Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 5 +- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 64 ++++++++++++++++++----- 3 files changed, 56 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 99fa440bc639..982682ec74fd 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -5053,7 +5053,6 @@ void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm, u32 qmask = BIT(mvm->trans->num_rx_queues) - 1; int ret; - lockdep_assert_held(&mvm->mutex); if (!iwl_mvm_has_new_rx_api(mvm)) return; @@ -5064,13 +5063,15 @@ void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm, atomic_set(&mvm->queue_sync_counter, mvm->trans->num_rx_queues); - ret = iwl_mvm_notify_rx_queue(mvm, qmask, (u8 *)notif, size); + ret = iwl_mvm_notify_rx_queue(mvm, qmask, (u8 *)notif, + size, !notif->sync); if (ret) { IWL_ERR(mvm, "Failed to trigger RX queues sync (%d)\n", ret); goto out; } if (notif->sync) { + lockdep_assert_held(&mvm->mutex); ret = wait_event_timeout(mvm->rx_sync_waitq, atomic_read(&mvm->queue_sync_counter) == 0 || iwl_mvm_is_radio_killed(mvm), diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index c1e8b4766b0c..fd1764df592f 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -1664,7 +1664,7 @@ void iwl_mvm_rx_monitor_no_data(struct iwl_mvm *mvm, struct napi_struct *napi, void iwl_mvm_rx_frame_release(struct iwl_mvm *mvm, struct napi_struct *napi, struct iwl_rx_cmd_buffer *rxb, int queue); int iwl_mvm_notify_rx_queue(struct iwl_mvm *mvm, u32 rxq_mask, - const u8 *data, u32 count); + const u8 *data, u32 count, bool async); void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct napi_struct *napi, struct iwl_rx_cmd_buffer *rxb, int queue); void iwl_mvm_rx_tx_cmd(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index 16078aa7c95f..4f4fdaf49eef 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -463,7 +463,7 @@ static bool iwl_mvm_is_dup(struct ieee80211_sta *sta, int queue, } int iwl_mvm_notify_rx_queue(struct iwl_mvm *mvm, u32 rxq_mask, - const u8 *data, u32 count) + const u8 *data, u32 count, bool async) { u8 buf[sizeof(struct iwl_rxq_sync_cmd) + sizeof(struct iwl_mvm_rss_sync_notif)]; @@ -487,7 +487,7 @@ int iwl_mvm_notify_rx_queue(struct iwl_mvm *mvm, u32 rxq_mask, ret = iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(DATA_PATH_GROUP, TRIGGER_RX_QUEUES_NOTIF_CMD), - 0, data_size, cmd); + async ? CMD_ASYNC : 0, data_size, cmd); return ret; } @@ -504,6 +504,18 @@ static bool iwl_mvm_is_sn_less(u16 sn1, u16 sn2, u16 buffer_size) !ieee80211_sn_less(sn1, sn2 - buffer_size); } +static void iwl_mvm_sync_nssn(struct iwl_mvm *mvm, u8 baid, u16 nssn) +{ + struct iwl_mvm_rss_sync_notif notif = { + .metadata.type = IWL_MVM_RXQ_NSSN_SYNC, + .metadata.sync = 0, + .nssn_sync.baid = baid, + .nssn_sync.nssn = nssn, + }; + + iwl_mvm_sync_rx_queues_internal(mvm, (void *)¬if, sizeof(notif)); +} + #define RX_REORDER_BUF_TIMEOUT_MQ (HZ / 10) static void iwl_mvm_release_frames(struct iwl_mvm *mvm, @@ -511,7 +523,7 @@ static void iwl_mvm_release_frames(struct iwl_mvm *mvm, struct napi_struct *napi, struct iwl_mvm_baid_data *baid_data, struct iwl_mvm_reorder_buffer *reorder_buf, - u16 nssn) + u16 nssn, bool sync_rss) { struct iwl_mvm_reorder_buf_entry *entries = &baid_data->entries[reorder_buf->queue * @@ -530,6 +542,8 @@ static void iwl_mvm_release_frames(struct iwl_mvm *mvm, struct sk_buff *skb; ssn = ieee80211_sn_inc(ssn); + if (sync_rss && (ssn == 2048 || ssn == 0)) + iwl_mvm_sync_nssn(mvm, baid_data->baid, ssn); /* * Empty the list. Will have more than one frame for A-MSDU. @@ -616,7 +630,8 @@ void iwl_mvm_reorder_timer_expired(struct timer_list *t) sta_id, sn); iwl_mvm_event_frame_timeout_callback(buf->mvm, mvmsta->vif, sta, baid_data->tid); - iwl_mvm_release_frames(buf->mvm, sta, NULL, baid_data, buf, sn); + iwl_mvm_release_frames(buf->mvm, sta, NULL, baid_data, + buf, sn, true); rcu_read_unlock(); } else { /* @@ -658,7 +673,8 @@ static void iwl_mvm_del_ba(struct iwl_mvm *mvm, int queue, spin_lock_bh(&reorder_buf->lock); iwl_mvm_release_frames(mvm, sta, NULL, ba_data, reorder_buf, ieee80211_sn_add(reorder_buf->head_sn, - reorder_buf->buf_size)); + reorder_buf->buf_size), + false); spin_unlock_bh(&reorder_buf->lock); del_timer_sync(&reorder_buf->reorder_timer); @@ -694,7 +710,8 @@ static void iwl_mvm_release_frames_from_notif(struct iwl_mvm *mvm, reorder_buf = &ba_data->reorder_buf[queue]; spin_lock_bh(&reorder_buf->lock); - iwl_mvm_release_frames(mvm, sta, napi, ba_data, reorder_buf, nssn); + iwl_mvm_release_frames(mvm, sta, napi, ba_data, + reorder_buf, nssn, false); spin_unlock_bh(&reorder_buf->lock); out: @@ -833,7 +850,8 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, } if (ieee80211_is_back_req(hdr->frame_control)) { - iwl_mvm_release_frames(mvm, sta, napi, baid_data, buffer, nssn); + iwl_mvm_release_frames(mvm, sta, napi, baid_data, + buffer, nssn, false); goto drop; } @@ -842,7 +860,10 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, * If the SN is smaller than the NSSN it might need to first go into * the reorder buffer, in which case we just release up to it and the * rest of the function will take care of storing it and releasing up to - * the nssn + * the nssn. + * This should not happen. This queue has been lagging and it should + * have been updated by a IWL_MVM_RXQ_NSSN_SYNC notification. Be nice + * and update the other queues. */ if (!iwl_mvm_is_sn_less(nssn, buffer->head_sn + buffer->buf_size, buffer->buf_size) || @@ -850,7 +871,7 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, u16 min_sn = ieee80211_sn_less(sn, nssn) ? sn : nssn; iwl_mvm_release_frames(mvm, sta, napi, baid_data, buffer, - min_sn); + min_sn, true); } /* drop any oudated packets */ @@ -861,8 +882,23 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, if (!buffer->num_stored && ieee80211_sn_less(sn, nssn)) { if (iwl_mvm_is_sn_less(buffer->head_sn, nssn, buffer->buf_size) && - (!amsdu || last_subframe)) + (!amsdu || last_subframe)) { + /* + * If we crossed the 2048 or 0 SN, notify all the + * queues. This is done in order to avoid having a + * head_sn that lags behind for too long. When that + * happens, we can get to a situation where the head_sn + * is within the interval [nssn - buf_size : nssn] + * which will make us think that the nssn is a packet + * that we already freed because of the reordering + * buffer and we will ignore it. So maintain the + * head_sn somewhat updated across all the queues: + * when it crosses 0 and 2048. + */ + if (sn == 2048 || sn == 0) + iwl_mvm_sync_nssn(mvm, baid, sn); buffer->head_sn = nssn; + } /* No need to update AMSDU last SN - we are moving the head */ spin_unlock_bh(&buffer->lock); return false; @@ -877,8 +913,11 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, * while technically there is no hole and we can move forward. */ if (!buffer->num_stored && sn == buffer->head_sn) { - if (!amsdu || last_subframe) + if (!amsdu || last_subframe) { + if (sn == 2048 || sn == 0) + iwl_mvm_sync_nssn(mvm, baid, sn); buffer->head_sn = ieee80211_sn_inc(buffer->head_sn); + } /* No need to update AMSDU last SN - we are moving the head */ spin_unlock_bh(&buffer->lock); return false; @@ -923,7 +962,8 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, * release notification with up to date NSSN. */ if (!amsdu || last_subframe) - iwl_mvm_release_frames(mvm, sta, napi, baid_data, buffer, nssn); + iwl_mvm_release_frames(mvm, sta, napi, baid_data, + buffer, nssn, true); spin_unlock_bh(&buffer->lock); return true; -- cgit From 23babdf06779482a65c5072a145d826a62979534 Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Tue, 25 Jun 2019 11:42:49 +0300 Subject: iwlwifi: mvm: add a wrapper around rs_tx_status to handle locks iwl_mvm_rs_tx_status can be called from two places in the code, but the mutex is taken only on one of the calls. Split it into a wrapper taking locks and an internal __iwl_mvm_rs_tx_status function. Signed-off-by: Gregory Greenman Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c index 02b4ef92543f..b50a47e86ef0 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c @@ -1218,8 +1218,10 @@ void iwl_mvm_rs_init_wk(struct work_struct *wk) rcu_read_unlock(); } -void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, - int tid, struct ieee80211_tx_info *info, bool ndp) +static void __iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, + struct ieee80211_sta *sta, + int tid, struct ieee80211_tx_info *info, + bool ndp) { int legacy_success; int retries; @@ -1451,6 +1453,21 @@ done: rs_rate_scale_perform(mvm, sta, lq_sta, tid, ndp); } +void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, + int tid, struct ieee80211_tx_info *info, bool ndp) +{ + struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); + + /* If it's locked we are in middle of init flow + * just wait for next tx status to update the lq_sta data + */ + if (!mutex_trylock(&mvmsta->lq_sta.rs_drv.mutex)) + return; + + __iwl_mvm_rs_tx_status(mvm, sta, tid, info, ndp); + mutex_unlock(&mvmsta->lq_sta.rs_drv.mutex); +} + /* * mac80211 sends us Tx status */ @@ -1472,15 +1489,8 @@ static void rs_drv_mac80211_tx_status(void *mvm_r, info->flags & IEEE80211_TX_CTL_NO_ACK) return; - /* If it's locked we are in middle of init flow - * just wait for next tx status to update the lq_sta data - */ - if (!mutex_trylock(&mvmsta->lq_sta.rs_drv.mutex)) - return; - iwl_mvm_rs_tx_status(mvm, sta, rs_get_tid(hdr), info, ieee80211_is_qos_nullfunc(hdr->frame_control)); - mutex_unlock(&mvmsta->lq_sta.rs_drv.mutex); } /* -- cgit From 072b30642f90b01d139131ec7bf763778a3a3f41 Mon Sep 17 00:00:00 2001 From: Shahar S Matityahu Date: Thu, 13 Jun 2019 15:08:24 +0300 Subject: iwlwifi: dbg_ini: move iwl_dbg_tlv_load_bin out of debug override ifdef ini debug mode should work even if debug override is not defined. Signed-off-by: Shahar S Matityahu Fixes: 68f6f492c4fa ("iwlwifi: trans: support loading ini TLVs from external file") Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c index 57d09049e615..d91686b9a540 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c @@ -1640,6 +1640,8 @@ struct iwl_drv *iwl_drv_start(struct iwl_trans *trans) init_completion(&drv->request_firmware_complete); INIT_LIST_HEAD(&drv->list); + iwl_load_fw_dbg_tlv(drv->trans->dev, drv->trans); + #ifdef CONFIG_IWLWIFI_DEBUGFS /* Create the device debugfs entries. */ drv->dbgfs_drv = debugfs_create_dir(dev_name(trans->dev), -- cgit From abcbef5977df1fb61026ba429964cd6b9a085699 Mon Sep 17 00:00:00 2001 From: Shahar S Matityahu Date: Thu, 13 Jun 2019 15:11:24 +0300 Subject: iwlwifi: dbg_ini: move iwl_dbg_tlv_free outside of debugfs ifdef The driver should call iwl_dbg_tlv_free even if debugfs is not defined since ini mode does not depend on debugfs ifdef. Signed-off-by: Shahar S Matityahu Fixes: 68f6f492c4fa ("iwlwifi: trans: support loading ini TLVs from external file") Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c index d91686b9a540..38672dd5aae9 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c @@ -1662,8 +1662,8 @@ struct iwl_drv *iwl_drv_start(struct iwl_trans *trans) err_fw: #ifdef CONFIG_IWLWIFI_DEBUGFS debugfs_remove_recursive(drv->dbgfs_drv); - iwl_fw_dbg_free(drv->trans); #endif + iwl_fw_dbg_free(drv->trans); kfree(drv); err: return ERR_PTR(ret); -- cgit From 6569e7d36773956298ec1d5f4e6a2487913d2752 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Jun 2019 09:44:50 +0200 Subject: iwlwifi: fix locking in delayed GTK setting This code clearly never could have worked, since it locks while already locked. Add an unlocked __iwl_mvm_mac_set_key() variant that doesn't do locking to fix that. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 39 +++++++++++++++-------- 1 file changed, 26 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 982682ec74fd..1c904b5226aa 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -207,11 +207,11 @@ static const struct cfg80211_pmsr_capabilities iwl_mvm_pmsr_capa = { }, }; -static int iwl_mvm_mac_set_key(struct ieee80211_hw *hw, - enum set_key_cmd cmd, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta, - struct ieee80211_key_conf *key); +static int __iwl_mvm_mac_set_key(struct ieee80211_hw *hw, + enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key); void iwl_mvm_ref(struct iwl_mvm *mvm, enum iwl_mvm_ref_type ref_type) { @@ -2738,7 +2738,7 @@ static int iwl_mvm_start_ap_ibss(struct ieee80211_hw *hw, mvmvif->ap_early_keys[i] = NULL; - ret = iwl_mvm_mac_set_key(hw, SET_KEY, vif, NULL, key); + ret = __iwl_mvm_mac_set_key(hw, SET_KEY, vif, NULL, key); if (ret) goto out_quota_failed; } @@ -3506,11 +3506,11 @@ static int iwl_mvm_mac_sched_scan_stop(struct ieee80211_hw *hw, return ret; } -static int iwl_mvm_mac_set_key(struct ieee80211_hw *hw, - enum set_key_cmd cmd, - struct ieee80211_vif *vif, - struct ieee80211_sta *sta, - struct ieee80211_key_conf *key) +static int __iwl_mvm_mac_set_key(struct ieee80211_hw *hw, + enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); @@ -3565,8 +3565,6 @@ static int iwl_mvm_mac_set_key(struct ieee80211_hw *hw, return -EOPNOTSUPP; } - mutex_lock(&mvm->mutex); - switch (cmd) { case SET_KEY: if ((vif->type == NL80211_IFTYPE_ADHOC || @@ -3712,7 +3710,22 @@ static int iwl_mvm_mac_set_key(struct ieee80211_hw *hw, ret = -EINVAL; } + return ret; +} + +static int iwl_mvm_mac_set_key(struct ieee80211_hw *hw, + enum set_key_cmd cmd, + struct ieee80211_vif *vif, + struct ieee80211_sta *sta, + struct ieee80211_key_conf *key) +{ + struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); + int ret; + + mutex_lock(&mvm->mutex); + ret = __iwl_mvm_mac_set_key(hw, cmd, vif, sta, key); mutex_unlock(&mvm->mutex); + return ret; } -- cgit From b6cf28796756246f9e317eed6f63f1e2981e9817 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 1 Jul 2019 17:26:57 +0100 Subject: iwlwifi: mvm: fix comparison of u32 variable with less than zero The comparison of the u32 variable wgds_tbl_idx with less than zero is always going to be false because it is unsigned. Fix this by making wgds_tbl_idx a plain signed int. Addresses-Coverity: ("Unsigned compared against 0") Fixes: 4fd445a2c855 ("iwlwifi: mvm: Add log information about SAR status") Signed-off-by: Colin Ian King Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/nvm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c b/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c index 719f793b3487..a9bb43a2f27b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c @@ -620,7 +620,7 @@ void iwl_mvm_rx_chub_update_mcc(struct iwl_mvm *mvm, enum iwl_mcc_source src; char mcc[3]; struct ieee80211_regdomain *regd; - u32 wgds_tbl_idx; + int wgds_tbl_idx; lockdep_assert_held(&mvm->mutex); -- cgit From cd4d6b0bcd51580efda9ae54ab7b2d630b4147dc Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Sun, 30 Jun 2019 09:18:15 +0300 Subject: iwlwifi: mvm: send LQ command always ASYNC The only place where the command was sent as SYNC is during init and this is not really critical. This change is required for replacing RS mutex with a spinlock (in the subsequent patch), since SYNC comamnd requres sleeping and thus the flow cannot be done when holding a spinlock. Signed-off-by: Gregory Greenman Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 23 ++++++++++++----------- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 4 ++-- 4 files changed, 16 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index fd1764df592f..a263cc629d75 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -1813,7 +1813,7 @@ iwl_mvm_vif_dbgfs_clean(struct iwl_mvm *mvm, struct ieee80211_vif *vif) #endif /* CONFIG_IWLWIFI_DEBUGFS */ /* rate scaling */ -int iwl_mvm_send_lq_cmd(struct iwl_mvm *mvm, struct iwl_lq_cmd *lq, bool sync); +int iwl_mvm_send_lq_cmd(struct iwl_mvm *mvm, struct iwl_lq_cmd *lq); void iwl_mvm_update_frame_stats(struct iwl_mvm *mvm, u32 rate, bool agg); int rs_pretty_print_rate(char *buf, int bufsz, const u32 rate); void rs_update_last_rssi(struct iwl_mvm *mvm, diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c index b50a47e86ef0..bd977ec8629b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c @@ -1328,7 +1328,7 @@ static void __iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, IWL_DEBUG_RATE(mvm, "Too many rates mismatch. Send sync LQ. rs_state %d\n", lq_sta->rs_state); - iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, false); + iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq); } /* Regardless, ignore this status info for outdated rate */ return; @@ -1390,7 +1390,8 @@ static void __iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, if (info->status.ampdu_ack_len == 0) info->status.ampdu_len = 1; - rs_collect_tlc_data(mvm, mvmsta, tid, curr_tbl, tx_resp_rate.index, + rs_collect_tlc_data(mvm, mvmsta, tid, curr_tbl, + tx_resp_rate.index, info->status.ampdu_len, info->status.ampdu_ack_len); @@ -1833,7 +1834,7 @@ static void rs_update_rate_tbl(struct iwl_mvm *mvm, struct iwl_scale_tbl_info *tbl) { rs_fill_lq_cmd(mvm, sta, lq_sta, &tbl->rate); - iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, false); + iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq); } static bool rs_tweak_rate_tbl(struct iwl_mvm *mvm, @@ -2935,7 +2936,7 @@ void rs_update_last_rssi(struct iwl_mvm *mvm, static void rs_initialize_lq(struct iwl_mvm *mvm, struct ieee80211_sta *sta, struct iwl_lq_sta *lq_sta, - enum nl80211_band band, bool update) + enum nl80211_band band) { struct iwl_scale_tbl_info *tbl; struct rs_rate *rate; @@ -2965,7 +2966,7 @@ static void rs_initialize_lq(struct iwl_mvm *mvm, rs_set_expected_tpt_table(lq_sta, tbl); rs_fill_lq_cmd(mvm, sta, lq_sta, rate); /* TODO restore station should remember the lq cmd */ - iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, !update); + iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq); } static void rs_drv_get_rate(void *mvm_r, struct ieee80211_sta *sta, @@ -3214,7 +3215,7 @@ void iwl_mvm_update_frame_stats(struct iwl_mvm *mvm, u32 rate, bool agg) * Called after adding a new station to initialize rate scaling */ static void rs_drv_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, - enum nl80211_band band, bool update) + enum nl80211_band band) { int i, j; struct ieee80211_hw *hw = mvm->hw; @@ -3294,7 +3295,7 @@ static void rs_drv_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, #ifdef CONFIG_IWLWIFI_DEBUGFS iwl_mvm_reset_frame_stats(mvm); #endif - rs_initialize_lq(mvm, sta, lq_sta, band, update); + rs_initialize_lq(mvm, sta, lq_sta, band); } static void rs_drv_rate_update(void *mvm_r, @@ -3608,7 +3609,7 @@ static void rs_set_lq_ss_params(struct iwl_mvm *mvm, bfersta_ss_params &= ~LQ_SS_BFER_ALLOWED; bfersta_lq_cmd->ss_params = cpu_to_le32(bfersta_ss_params); - iwl_mvm_send_lq_cmd(mvm, bfersta_lq_cmd, false); + iwl_mvm_send_lq_cmd(mvm, bfersta_lq_cmd); ss_params |= LQ_SS_BFER_ALLOWED; IWL_DEBUG_RATE(mvm, @@ -3774,7 +3775,7 @@ static void rs_program_fix_rate(struct iwl_mvm *mvm, if (lq_sta->pers.dbg_fixed_rate) { rs_fill_lq_cmd(mvm, NULL, lq_sta, NULL); - iwl_mvm_send_lq_cmd(lq_sta->pers.drv, &lq_sta->lq, false); + iwl_mvm_send_lq_cmd(lq_sta->pers.drv, &lq_sta->lq); } } @@ -4177,7 +4178,7 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); mutex_lock(&mvmsta->lq_sta.rs_drv.mutex); - rs_drv_rate_init(mvm, sta, band, update); + rs_drv_rate_init(mvm, sta, band); mutex_unlock(&mvmsta->lq_sta.rs_drv.mutex); } } @@ -4209,7 +4210,7 @@ static int rs_drv_tx_protection(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, lq->flags &= ~LQ_FLAG_USE_RTS_MSK; } - return iwl_mvm_send_lq_cmd(mvm, lq, false); + return iwl_mvm_send_lq_cmd(mvm, lq); } /** diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 23fd3108adb9..88d16b5442e7 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -2978,7 +2978,7 @@ out: IWL_DEBUG_HT(mvm, "Tx aggregation enabled on ra = %pM tid = %d\n", sta->addr, tid); - return iwl_mvm_send_lq_cmd(mvm, &mvmsta->lq_sta.rs_drv.lq, false); + return iwl_mvm_send_lq_cmd(mvm, &mvmsta->lq_sta.rs_drv.lq); } static void iwl_mvm_unreserve_agg_queue(struct iwl_mvm *mvm, diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c index 9ecd5f09615a..b8e20a01c192 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c @@ -653,12 +653,12 @@ int iwl_mvm_reconfig_scd(struct iwl_mvm *mvm, int queue, int fifo, int sta_id, * this case to clear the state indicating that station creation is in * progress. */ -int iwl_mvm_send_lq_cmd(struct iwl_mvm *mvm, struct iwl_lq_cmd *lq, bool sync) +int iwl_mvm_send_lq_cmd(struct iwl_mvm *mvm, struct iwl_lq_cmd *lq) { struct iwl_host_cmd cmd = { .id = LQ_CMD, .len = { sizeof(struct iwl_lq_cmd), }, - .flags = sync ? 0 : CMD_ASYNC, + .flags = CMD_ASYNC, .data = { lq, }, }; -- cgit From f5d88fa334e6c8e2d840512ffbb30e3cb58d065b Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Sun, 30 Jun 2019 09:42:57 +0300 Subject: iwlwifi: mvm: replace RS mutex with a spin_lock The solution with the worker still had a bug, as in order to get sta, rcu_read_lock should be used and thus no mutex can be used inside iwl_mvm_rs_rate_init. Also, spin_lock is a simpler solution, no need to spawn a dedicated worker. Signed-off-by: Gregory Greenman Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 530 +++++++++++++-------------- drivers/net/wireless/intel/iwlwifi/mvm/rs.h | 6 +- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 6 +- drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 1 - 4 files changed, 258 insertions(+), 285 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c index bd977ec8629b..3fa50b1955bb 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c @@ -1197,278 +1197,6 @@ static u8 rs_get_tid(struct ieee80211_hdr *hdr) return tid; } -void iwl_mvm_rs_init_wk(struct work_struct *wk) -{ - struct iwl_mvm_sta *mvmsta = container_of(wk, struct iwl_mvm_sta, - rs_init_wk); - struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(mvmsta->vif); - struct ieee80211_sta *sta; - - rcu_read_lock(); - - sta = rcu_dereference(mvmvif->mvm->fw_id_to_mac_id[mvmsta->sta_id]); - if (WARN_ON_ONCE(IS_ERR_OR_NULL(sta))) { - rcu_read_unlock(); - return; - } - - iwl_mvm_rs_rate_init(mvmvif->mvm, sta, mvmvif->phy_ctxt->channel->band, - true); - - rcu_read_unlock(); -} - -static void __iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, - struct ieee80211_sta *sta, - int tid, struct ieee80211_tx_info *info, - bool ndp) -{ - int legacy_success; - int retries; - int i; - struct iwl_lq_cmd *table; - u32 lq_hwrate; - struct rs_rate lq_rate, tx_resp_rate; - struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl; - u32 tlc_info = (uintptr_t)info->status.status_driver_data[0]; - u8 reduced_txp = tlc_info & RS_DRV_DATA_TXP_MSK; - u8 lq_color = RS_DRV_DATA_LQ_COLOR_GET(tlc_info); - u32 tx_resp_hwrate = (uintptr_t)info->status.status_driver_data[1]; - struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); - struct iwl_lq_sta *lq_sta = &mvmsta->lq_sta.rs_drv; - - /* Treat uninitialized rate scaling data same as non-existing. */ - if (!lq_sta) { - IWL_DEBUG_RATE(mvm, "Station rate scaling not created yet.\n"); - return; - } else if (!lq_sta->pers.drv) { - IWL_DEBUG_RATE(mvm, "Rate scaling not initialized yet.\n"); - return; - } - - /* This packet was aggregated but doesn't carry status info */ - if ((info->flags & IEEE80211_TX_CTL_AMPDU) && - !(info->flags & IEEE80211_TX_STAT_AMPDU)) - return; - - if (rs_rate_from_ucode_rate(tx_resp_hwrate, info->band, - &tx_resp_rate)) { - WARN_ON_ONCE(1); - return; - } - -#ifdef CONFIG_MAC80211_DEBUGFS - /* Disable last tx check if we are debugging with fixed rate but - * update tx stats */ - if (lq_sta->pers.dbg_fixed_rate) { - int index = tx_resp_rate.index; - enum rs_column column; - int attempts, success; - - column = rs_get_column_from_rate(&tx_resp_rate); - if (WARN_ONCE(column == RS_COLUMN_INVALID, - "Can't map rate 0x%x to column", - tx_resp_hwrate)) - return; - - if (info->flags & IEEE80211_TX_STAT_AMPDU) { - attempts = info->status.ampdu_len; - success = info->status.ampdu_ack_len; - } else { - attempts = info->status.rates[0].count; - success = !!(info->flags & IEEE80211_TX_STAT_ACK); - } - - lq_sta->pers.tx_stats[column][index].total += attempts; - lq_sta->pers.tx_stats[column][index].success += success; - - IWL_DEBUG_RATE(mvm, "Fixed rate 0x%x success %d attempts %d\n", - tx_resp_hwrate, success, attempts); - return; - } -#endif - - if (time_after(jiffies, - (unsigned long)(lq_sta->last_tx + - (IWL_MVM_RS_IDLE_TIMEOUT * HZ)))) { - IWL_DEBUG_RATE(mvm, "Tx idle for too long. reinit rs\n"); - schedule_work(&mvmsta->rs_init_wk); - return; - } - lq_sta->last_tx = jiffies; - - /* Ignore this Tx frame response if its initial rate doesn't match - * that of latest Link Quality command. There may be stragglers - * from a previous Link Quality command, but we're no longer interested - * in those; they're either from the "active" mode while we're trying - * to check "search" mode, or a prior "search" mode after we've moved - * to a new "search" mode (which might become the new "active" mode). - */ - table = &lq_sta->lq; - lq_hwrate = le32_to_cpu(table->rs_table[0]); - if (rs_rate_from_ucode_rate(lq_hwrate, info->band, &lq_rate)) { - WARN_ON_ONCE(1); - return; - } - - /* Here we actually compare this rate to the latest LQ command */ - if (lq_color != LQ_FLAG_COLOR_GET(table->flags)) { - IWL_DEBUG_RATE(mvm, - "tx resp color 0x%x does not match 0x%x\n", - lq_color, LQ_FLAG_COLOR_GET(table->flags)); - - /* - * Since rates mis-match, the last LQ command may have failed. - * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with - * ... driver. - */ - lq_sta->missed_rate_counter++; - if (lq_sta->missed_rate_counter > IWL_MVM_RS_MISSED_RATE_MAX) { - lq_sta->missed_rate_counter = 0; - IWL_DEBUG_RATE(mvm, - "Too many rates mismatch. Send sync LQ. rs_state %d\n", - lq_sta->rs_state); - iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq); - } - /* Regardless, ignore this status info for outdated rate */ - return; - } else - /* Rate did match, so reset the missed_rate_counter */ - lq_sta->missed_rate_counter = 0; - - if (!lq_sta->search_better_tbl) { - curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); - } else { - curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); - other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - } - - if (WARN_ON_ONCE(!rs_rate_column_match(&lq_rate, &curr_tbl->rate))) { - IWL_DEBUG_RATE(mvm, - "Neither active nor search matches tx rate\n"); - tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); - rs_dump_rate(mvm, &tmp_tbl->rate, "ACTIVE"); - tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); - rs_dump_rate(mvm, &tmp_tbl->rate, "SEARCH"); - rs_dump_rate(mvm, &lq_rate, "ACTUAL"); - - /* - * no matching table found, let's by-pass the data collection - * and continue to perform rate scale to find the rate table - */ - rs_stay_in_table(lq_sta, true); - goto done; - } - - /* - * Updating the frame history depends on whether packets were - * aggregated. - * - * For aggregation, all packets were transmitted at the same rate, the - * first index into rate scale table. - */ - if (info->flags & IEEE80211_TX_STAT_AMPDU) { - rs_collect_tpc_data(mvm, lq_sta, curr_tbl, tx_resp_rate.index, - info->status.ampdu_len, - info->status.ampdu_ack_len, - reduced_txp); - - /* ampdu_ack_len = 0 marks no BA was received. For TLC, treat - * it as a single frame loss as we don't want the success ratio - * to dip too quickly because a BA wasn't received. - * For TPC, there's no need for this optimisation since we want - * to recover very quickly from a bad power reduction and, - * therefore we'd like the success ratio to get an immediate hit - * when failing to get a BA, so we'd switch back to a lower or - * zero power reduction. When FW transmits agg with a rate - * different from the initial rate, it will not use reduced txp - * and will send BA notification twice (one empty with reduced - * txp equal to the value from LQ and one with reduced txp 0). - * We need to update counters for each txp level accordingly. - */ - if (info->status.ampdu_ack_len == 0) - info->status.ampdu_len = 1; - - rs_collect_tlc_data(mvm, mvmsta, tid, curr_tbl, - tx_resp_rate.index, - info->status.ampdu_len, - info->status.ampdu_ack_len); - - /* Update success/fail counts if not searching for new mode */ - if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) { - lq_sta->total_success += info->status.ampdu_ack_len; - lq_sta->total_failed += (info->status.ampdu_len - - info->status.ampdu_ack_len); - } - } else { - /* For legacy, update frame history with for each Tx retry. */ - retries = info->status.rates[0].count - 1; - /* HW doesn't send more than 15 retries */ - retries = min(retries, 15); - - /* The last transmission may have been successful */ - legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK); - /* Collect data for each rate used during failed TX attempts */ - for (i = 0; i <= retries; ++i) { - lq_hwrate = le32_to_cpu(table->rs_table[i]); - if (rs_rate_from_ucode_rate(lq_hwrate, info->band, - &lq_rate)) { - WARN_ON_ONCE(1); - return; - } - - /* - * Only collect stats if retried rate is in the same RS - * table as active/search. - */ - if (rs_rate_column_match(&lq_rate, &curr_tbl->rate)) - tmp_tbl = curr_tbl; - else if (rs_rate_column_match(&lq_rate, - &other_tbl->rate)) - tmp_tbl = other_tbl; - else - continue; - - rs_collect_tpc_data(mvm, lq_sta, tmp_tbl, - tx_resp_rate.index, 1, - i < retries ? 0 : legacy_success, - reduced_txp); - rs_collect_tlc_data(mvm, mvmsta, tid, tmp_tbl, - tx_resp_rate.index, 1, - i < retries ? 0 : legacy_success); - } - - /* Update success/fail counts if not searching for new mode */ - if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) { - lq_sta->total_success += legacy_success; - lq_sta->total_failed += retries + (1 - legacy_success); - } - } - /* The last TX rate is cached in lq_sta; it's set in if/else above */ - lq_sta->last_rate_n_flags = lq_hwrate; - IWL_DEBUG_RATE(mvm, "reduced txpower: %d\n", reduced_txp); -done: - /* See if there's a better rate or modulation mode to try. */ - if (sta->supp_rates[info->band]) - rs_rate_scale_perform(mvm, sta, lq_sta, tid, ndp); -} - -void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, - int tid, struct ieee80211_tx_info *info, bool ndp) -{ - struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); - - /* If it's locked we are in middle of init flow - * just wait for next tx status to update the lq_sta data - */ - if (!mutex_trylock(&mvmsta->lq_sta.rs_drv.mutex)) - return; - - __iwl_mvm_rs_tx_status(mvm, sta, tid, info, ndp); - mutex_unlock(&mvmsta->lq_sta.rs_drv.mutex); -} - /* * mac80211 sends us Tx status */ @@ -3226,6 +2954,8 @@ static void rs_drv_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, struct ieee80211_supported_band *sband; unsigned long supp; /* must be unsigned long for for_each_set_bit */ + lockdep_assert_held(&mvmsta->lq_sta.rs_drv.pers.lock); + /* clear all non-persistent lq data */ memset(lq_sta, 0, offsetof(typeof(*lq_sta), pers)); @@ -3318,6 +3048,258 @@ static void rs_drv_rate_update(void *mvm_r, iwl_mvm_rs_rate_init(mvm, sta, sband->band, true); } +static void __iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, + struct ieee80211_sta *sta, + int tid, struct ieee80211_tx_info *info, + bool ndp) +{ + int legacy_success; + int retries; + int i; + struct iwl_lq_cmd *table; + u32 lq_hwrate; + struct rs_rate lq_rate, tx_resp_rate; + struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl; + u32 tlc_info = (uintptr_t)info->status.status_driver_data[0]; + u8 reduced_txp = tlc_info & RS_DRV_DATA_TXP_MSK; + u8 lq_color = RS_DRV_DATA_LQ_COLOR_GET(tlc_info); + u32 tx_resp_hwrate = (uintptr_t)info->status.status_driver_data[1]; + struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); + struct iwl_lq_sta *lq_sta = &mvmsta->lq_sta.rs_drv; + + /* Treat uninitialized rate scaling data same as non-existing. */ + if (!lq_sta) { + IWL_DEBUG_RATE(mvm, "Station rate scaling not created yet.\n"); + return; + } else if (!lq_sta->pers.drv) { + IWL_DEBUG_RATE(mvm, "Rate scaling not initialized yet.\n"); + return; + } + + /* This packet was aggregated but doesn't carry status info */ + if ((info->flags & IEEE80211_TX_CTL_AMPDU) && + !(info->flags & IEEE80211_TX_STAT_AMPDU)) + return; + + if (rs_rate_from_ucode_rate(tx_resp_hwrate, info->band, + &tx_resp_rate)) { + WARN_ON_ONCE(1); + return; + } + +#ifdef CONFIG_MAC80211_DEBUGFS + /* Disable last tx check if we are debugging with fixed rate but + * update tx stats + */ + if (lq_sta->pers.dbg_fixed_rate) { + int index = tx_resp_rate.index; + enum rs_column column; + int attempts, success; + + column = rs_get_column_from_rate(&tx_resp_rate); + if (WARN_ONCE(column == RS_COLUMN_INVALID, + "Can't map rate 0x%x to column", + tx_resp_hwrate)) + return; + + if (info->flags & IEEE80211_TX_STAT_AMPDU) { + attempts = info->status.ampdu_len; + success = info->status.ampdu_ack_len; + } else { + attempts = info->status.rates[0].count; + success = !!(info->flags & IEEE80211_TX_STAT_ACK); + } + + lq_sta->pers.tx_stats[column][index].total += attempts; + lq_sta->pers.tx_stats[column][index].success += success; + + IWL_DEBUG_RATE(mvm, "Fixed rate 0x%x success %d attempts %d\n", + tx_resp_hwrate, success, attempts); + return; + } +#endif + + if (time_after(jiffies, + (unsigned long)(lq_sta->last_tx + + (IWL_MVM_RS_IDLE_TIMEOUT * HZ)))) { + IWL_DEBUG_RATE(mvm, "Tx idle for too long. reinit rs\n"); + /* reach here only in case of driver RS, call directly + * the unlocked version + */ + rs_drv_rate_init(mvm, sta, info->band); + return; + } + lq_sta->last_tx = jiffies; + + /* Ignore this Tx frame response if its initial rate doesn't match + * that of latest Link Quality command. There may be stragglers + * from a previous Link Quality command, but we're no longer interested + * in those; they're either from the "active" mode while we're trying + * to check "search" mode, or a prior "search" mode after we've moved + * to a new "search" mode (which might become the new "active" mode). + */ + table = &lq_sta->lq; + lq_hwrate = le32_to_cpu(table->rs_table[0]); + if (rs_rate_from_ucode_rate(lq_hwrate, info->band, &lq_rate)) { + WARN_ON_ONCE(1); + return; + } + + /* Here we actually compare this rate to the latest LQ command */ + if (lq_color != LQ_FLAG_COLOR_GET(table->flags)) { + IWL_DEBUG_RATE(mvm, + "tx resp color 0x%x does not match 0x%x\n", + lq_color, LQ_FLAG_COLOR_GET(table->flags)); + + /* Since rates mis-match, the last LQ command may have failed. + * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with + * ... driver. + */ + lq_sta->missed_rate_counter++; + if (lq_sta->missed_rate_counter > IWL_MVM_RS_MISSED_RATE_MAX) { + lq_sta->missed_rate_counter = 0; + IWL_DEBUG_RATE(mvm, + "Too many rates mismatch. Send sync LQ. rs_state %d\n", + lq_sta->rs_state); + iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq); + } + /* Regardless, ignore this status info for outdated rate */ + return; + } + + /* Rate did match, so reset the missed_rate_counter */ + lq_sta->missed_rate_counter = 0; + + if (!lq_sta->search_better_tbl) { + curr_tbl = &lq_sta->lq_info[lq_sta->active_tbl]; + other_tbl = &lq_sta->lq_info[1 - lq_sta->active_tbl]; + } else { + curr_tbl = &lq_sta->lq_info[1 - lq_sta->active_tbl]; + other_tbl = &lq_sta->lq_info[lq_sta->active_tbl]; + } + + if (WARN_ON_ONCE(!rs_rate_column_match(&lq_rate, &curr_tbl->rate))) { + IWL_DEBUG_RATE(mvm, + "Neither active nor search matches tx rate\n"); + tmp_tbl = &lq_sta->lq_info[lq_sta->active_tbl]; + rs_dump_rate(mvm, &tmp_tbl->rate, "ACTIVE"); + tmp_tbl = &lq_sta->lq_info[1 - lq_sta->active_tbl]; + rs_dump_rate(mvm, &tmp_tbl->rate, "SEARCH"); + rs_dump_rate(mvm, &lq_rate, "ACTUAL"); + + /* no matching table found, let's by-pass the data collection + * and continue to perform rate scale to find the rate table + */ + rs_stay_in_table(lq_sta, true); + goto done; + } + + /* Updating the frame history depends on whether packets were + * aggregated. + * + * For aggregation, all packets were transmitted at the same rate, the + * first index into rate scale table. + */ + if (info->flags & IEEE80211_TX_STAT_AMPDU) { + rs_collect_tpc_data(mvm, lq_sta, curr_tbl, tx_resp_rate.index, + info->status.ampdu_len, + info->status.ampdu_ack_len, + reduced_txp); + + /* ampdu_ack_len = 0 marks no BA was received. For TLC, treat + * it as a single frame loss as we don't want the success ratio + * to dip too quickly because a BA wasn't received. + * For TPC, there's no need for this optimisation since we want + * to recover very quickly from a bad power reduction and, + * therefore we'd like the success ratio to get an immediate hit + * when failing to get a BA, so we'd switch back to a lower or + * zero power reduction. When FW transmits agg with a rate + * different from the initial rate, it will not use reduced txp + * and will send BA notification twice (one empty with reduced + * txp equal to the value from LQ and one with reduced txp 0). + * We need to update counters for each txp level accordingly. + */ + if (info->status.ampdu_ack_len == 0) + info->status.ampdu_len = 1; + + rs_collect_tlc_data(mvm, mvmsta, tid, curr_tbl, + tx_resp_rate.index, + info->status.ampdu_len, + info->status.ampdu_ack_len); + + /* Update success/fail counts if not searching for new mode */ + if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) { + lq_sta->total_success += info->status.ampdu_ack_len; + lq_sta->total_failed += (info->status.ampdu_len - + info->status.ampdu_ack_len); + } + } else { + /* For legacy, update frame history with for each Tx retry. */ + retries = info->status.rates[0].count - 1; + /* HW doesn't send more than 15 retries */ + retries = min(retries, 15); + + /* The last transmission may have been successful */ + legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK); + /* Collect data for each rate used during failed TX attempts */ + for (i = 0; i <= retries; ++i) { + lq_hwrate = le32_to_cpu(table->rs_table[i]); + if (rs_rate_from_ucode_rate(lq_hwrate, info->band, + &lq_rate)) { + WARN_ON_ONCE(1); + return; + } + + /* Only collect stats if retried rate is in the same RS + * table as active/search. + */ + if (rs_rate_column_match(&lq_rate, &curr_tbl->rate)) + tmp_tbl = curr_tbl; + else if (rs_rate_column_match(&lq_rate, + &other_tbl->rate)) + tmp_tbl = other_tbl; + else + continue; + + rs_collect_tpc_data(mvm, lq_sta, tmp_tbl, + tx_resp_rate.index, 1, + i < retries ? 0 : legacy_success, + reduced_txp); + rs_collect_tlc_data(mvm, mvmsta, tid, tmp_tbl, + tx_resp_rate.index, 1, + i < retries ? 0 : legacy_success); + } + + /* Update success/fail counts if not searching for new mode */ + if (lq_sta->rs_state == RS_STATE_STAY_IN_COLUMN) { + lq_sta->total_success += legacy_success; + lq_sta->total_failed += retries + (1 - legacy_success); + } + } + /* The last TX rate is cached in lq_sta; it's set in if/else above */ + lq_sta->last_rate_n_flags = lq_hwrate; + IWL_DEBUG_RATE(mvm, "reduced txpower: %d\n", reduced_txp); +done: + /* See if there's a better rate or modulation mode to try. */ + if (sta->supp_rates[info->band]) + rs_rate_scale_perform(mvm, sta, lq_sta, tid, ndp); +} + +void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, + int tid, struct ieee80211_tx_info *info, bool ndp) +{ + struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); + + /* If it's locked we are in middle of init flow + * just wait for next tx status to update the lq_sta data + */ + if (!spin_trylock(&mvmsta->lq_sta.rs_drv.pers.lock)) + return; + + __iwl_mvm_rs_tx_status(mvm, sta, tid, info, ndp); + spin_unlock(&mvmsta->lq_sta.rs_drv.pers.lock); +} + #ifdef CONFIG_MAC80211_DEBUGFS static void rs_build_rates_table_from_fixed(struct iwl_mvm *mvm, struct iwl_lq_cmd *lq_cmd, @@ -4177,9 +4159,9 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, } else { struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); - mutex_lock(&mvmsta->lq_sta.rs_drv.mutex); + spin_lock(&mvmsta->lq_sta.rs_drv.pers.lock); rs_drv_rate_init(mvm, sta, band); - mutex_unlock(&mvmsta->lq_sta.rs_drv.mutex); + spin_unlock(&mvmsta->lq_sta.rs_drv.pers.lock); } } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.h b/drivers/net/wireless/intel/iwlwifi/mvm/rs.h index 086f47e2a4f0..428642e66658 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.h @@ -376,9 +376,6 @@ struct iwl_lq_sta { /* tx power reduce for this sta */ int tpc_reduce; - /* avoid races of reinit and update table from rx_tx */ - struct mutex mutex; - /* persistent fields - initialized only once - keep last! */ struct lq_sta_pers { #ifdef CONFIG_MAC80211_DEBUGFS @@ -393,6 +390,7 @@ struct iwl_lq_sta { s8 last_rssi; struct rs_rate_stats tx_stats[RS_COLUMN_COUNT][IWL_RATE_COUNT]; struct iwl_mvm *drv; + spinlock_t lock; /* for races in reinit/update table */ } pers; }; @@ -443,8 +441,6 @@ struct iwl_mvm_sta; int iwl_mvm_tx_protection(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, bool enable); -void iwl_mvm_rs_init_wk(struct work_struct *wk); - #ifdef CONFIG_IWLWIFI_DEBUGFS void iwl_mvm_reset_frame_stats(struct iwl_mvm *mvm); #endif diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 88d16b5442e7..10f18536dd0d 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1685,9 +1685,7 @@ int iwl_mvm_add_sta(struct iwl_mvm *mvm, if (iwl_mvm_has_tlc_offload(mvm)) iwl_mvm_rs_add_sta(mvm, mvm_sta); else - mutex_init(&mvm_sta->lq_sta.rs_drv.mutex); - - INIT_WORK(&mvm_sta->rs_init_wk, iwl_mvm_rs_init_wk); + spin_lock_init(&mvm_sta->lq_sta.rs_drv.pers.lock); iwl_mvm_toggle_tx_ant(mvm, &mvm_sta->tx_ant); @@ -1850,8 +1848,6 @@ int iwl_mvm_rm_sta(struct iwl_mvm *mvm, if (ret) return ret; - cancel_work_sync(&mvm_sta->rs_init_wk); - /* flush its queues here since we are freeing mvm_sta */ ret = iwl_mvm_flush_sta(mvm, mvm_sta, false, 0); if (ret) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h index 4823c06e6909..8d70093847cb 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h @@ -432,7 +432,6 @@ struct iwl_mvm_sta { struct iwl_lq_sta_rs_fw rs_fw; struct iwl_lq_sta rs_drv; } lq_sta; - struct work_struct rs_init_wk; struct ieee80211_vif *vif; struct iwl_mvm_key_pn __rcu *ptk_pn[4]; struct iwl_mvm_rxq_dup_data *dup_data; -- cgit From ecd09ddc1d14cca4f874151aed51a7feee3f765b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 27 Jun 2019 21:50:24 +0300 Subject: iwlwifi: mvm: fix frame drop from the reordering buffer An earlier patch made sure that the queues are not lagging too far behind. This means that iwl_mvm_release_frames should not be called with a head_sn too far behind NSSN. Don't take the risk to change completely the entry condition to iwl_mvm_release_frames, but don't update the head_sn is the NSSN is more than 2048 packets ahead of us. Since this just cannot be right. This means that the scenario described here happened. We are queue 0. Q:0 Q:1 head_sn: 0 -> 2047 head_sn: 2048 Lots of packets arrive: head_sn: 2047 -> 2150 send NSSN_SYNC notification Handle notification from the firmware and do NOT move the head_sn back to 2048 Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 44 ++++++++++++++++++++------- 1 file changed, 33 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index 4f4fdaf49eef..854edd7d7103 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -518,12 +518,17 @@ static void iwl_mvm_sync_nssn(struct iwl_mvm *mvm, u8 baid, u16 nssn) #define RX_REORDER_BUF_TIMEOUT_MQ (HZ / 10) +enum iwl_mvm_release_flags { + IWL_MVM_RELEASE_SEND_RSS_SYNC = BIT(0), + IWL_MVM_RELEASE_FROM_RSS_SYNC = BIT(1), +}; + static void iwl_mvm_release_frames(struct iwl_mvm *mvm, struct ieee80211_sta *sta, struct napi_struct *napi, struct iwl_mvm_baid_data *baid_data, struct iwl_mvm_reorder_buffer *reorder_buf, - u16 nssn, bool sync_rss) + u16 nssn, u32 flags) { struct iwl_mvm_reorder_buf_entry *entries = &baid_data->entries[reorder_buf->queue * @@ -532,6 +537,18 @@ static void iwl_mvm_release_frames(struct iwl_mvm *mvm, lockdep_assert_held(&reorder_buf->lock); + /* + * We keep the NSSN not too far behind, if we are sync'ing it and it + * is more than 2048 ahead of us, it must be behind us. Discard it. + * This can happen if the queue that hit the 0 / 2048 seqno was lagging + * behind and this queue already processed packets. The next if + * would have caught cases where this queue would have processed less + * than 64 packets, but it may have processed more than 64 packets. + */ + if ((flags & IWL_MVM_RELEASE_FROM_RSS_SYNC) && + ieee80211_sn_less(nssn, ssn)) + goto set_timer; + /* ignore nssn smaller than head sn - this can happen due to timeout */ if (iwl_mvm_is_sn_less(nssn, ssn, reorder_buf->buf_size)) goto set_timer; @@ -542,7 +559,8 @@ static void iwl_mvm_release_frames(struct iwl_mvm *mvm, struct sk_buff *skb; ssn = ieee80211_sn_inc(ssn); - if (sync_rss && (ssn == 2048 || ssn == 0)) + if ((flags & IWL_MVM_RELEASE_SEND_RSS_SYNC) && + (ssn == 2048 || ssn == 0)) iwl_mvm_sync_nssn(mvm, baid_data->baid, ssn); /* @@ -631,7 +649,7 @@ void iwl_mvm_reorder_timer_expired(struct timer_list *t) iwl_mvm_event_frame_timeout_callback(buf->mvm, mvmsta->vif, sta, baid_data->tid); iwl_mvm_release_frames(buf->mvm, sta, NULL, baid_data, - buf, sn, true); + buf, sn, IWL_MVM_RELEASE_SEND_RSS_SYNC); rcu_read_unlock(); } else { /* @@ -674,7 +692,7 @@ static void iwl_mvm_del_ba(struct iwl_mvm *mvm, int queue, iwl_mvm_release_frames(mvm, sta, NULL, ba_data, reorder_buf, ieee80211_sn_add(reorder_buf->head_sn, reorder_buf->buf_size), - false); + 0); spin_unlock_bh(&reorder_buf->lock); del_timer_sync(&reorder_buf->reorder_timer); @@ -684,7 +702,8 @@ out: static void iwl_mvm_release_frames_from_notif(struct iwl_mvm *mvm, struct napi_struct *napi, - u8 baid, u16 nssn, int queue) + u8 baid, u16 nssn, int queue, + u32 flags) { struct ieee80211_sta *sta; struct iwl_mvm_reorder_buffer *reorder_buf; @@ -711,7 +730,7 @@ static void iwl_mvm_release_frames_from_notif(struct iwl_mvm *mvm, spin_lock_bh(&reorder_buf->lock); iwl_mvm_release_frames(mvm, sta, napi, ba_data, - reorder_buf, nssn, false); + reorder_buf, nssn, flags); spin_unlock_bh(&reorder_buf->lock); out: @@ -723,7 +742,8 @@ static void iwl_mvm_nssn_sync(struct iwl_mvm *mvm, const struct iwl_mvm_nssn_sync_data *data) { iwl_mvm_release_frames_from_notif(mvm, napi, data->baid, - data->nssn, queue); + data->nssn, queue, + IWL_MVM_RELEASE_FROM_RSS_SYNC); } void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct napi_struct *napi, @@ -851,7 +871,7 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, if (ieee80211_is_back_req(hdr->frame_control)) { iwl_mvm_release_frames(mvm, sta, napi, baid_data, - buffer, nssn, false); + buffer, nssn, 0); goto drop; } @@ -871,7 +891,7 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, u16 min_sn = ieee80211_sn_less(sn, nssn) ? sn : nssn; iwl_mvm_release_frames(mvm, sta, napi, baid_data, buffer, - min_sn, true); + min_sn, IWL_MVM_RELEASE_SEND_RSS_SYNC); } /* drop any oudated packets */ @@ -963,7 +983,8 @@ static bool iwl_mvm_reorder(struct iwl_mvm *mvm, */ if (!amsdu || last_subframe) iwl_mvm_release_frames(mvm, sta, napi, baid_data, - buffer, nssn, true); + buffer, nssn, + IWL_MVM_RELEASE_SEND_RSS_SYNC); spin_unlock_bh(&buffer->lock); return true; @@ -1936,5 +1957,6 @@ void iwl_mvm_rx_frame_release(struct iwl_mvm *mvm, struct napi_struct *napi, struct iwl_frame_release *release = (void *)pkt->data; iwl_mvm_release_frames_from_notif(mvm, napi, release->baid, - le16_to_cpu(release->nssn), queue); + le16_to_cpu(release->nssn), + queue, 0); } -- cgit From 514ea05b0743435bf181c41f48d83aac050cc6fa Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Mon, 8 Jul 2019 09:07:42 +0300 Subject: iwlwifi: mvm: fix possible out-of-bounds read when accessing lq_info lq_info is an arary of size 2, active_tbl index is u8. When accessing lq_info[1 - active_tbl], theoretically it's possible that the access will be made to a negative index value. Signed-off-by: Gregory Greenman Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c index 3fa50b1955bb..d3f04acfbacb 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c @@ -1352,6 +1352,18 @@ static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta, tbl->expected_tpt = rs_get_expected_tpt_table(lq_sta, column, rate->bw); } +/* rs uses two tables, one is active and the second is for searching better + * configuration. This function, according to the index of the currently + * active table returns the search table, which is located at the + * index complementary to 1 according to the active table (active = 1, + * search = 0 or active = 0, search = 1). + * Since lq_info is an arary of size 2, make sure index cannot be out of bounds. + */ +static inline u8 rs_search_tbl(u8 active_tbl) +{ + return (active_tbl ^ 1) & 1; +} + static s32 rs_get_best_rate(struct iwl_mvm *mvm, struct iwl_lq_sta *lq_sta, struct iwl_scale_tbl_info *tbl, /* "search" */ @@ -1699,9 +1711,9 @@ static int rs_switch_to_column(struct iwl_mvm *mvm, struct ieee80211_sta *sta, enum rs_column col_id) { - struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); + struct iwl_scale_tbl_info *tbl = &lq_sta->lq_info[lq_sta->active_tbl]; struct iwl_scale_tbl_info *search_tbl = - &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + &lq_sta->lq_info[rs_search_tbl(lq_sta->active_tbl)]; struct rs_rate *rate = &search_tbl->rate; const struct rs_tx_column *column = &rs_tx_columns[col_id]; const struct rs_tx_column *curr_column = &rs_tx_columns[tbl->column]; @@ -2109,7 +2121,7 @@ static void rs_rate_scale_perform(struct iwl_mvm *mvm, if (!lq_sta->search_better_tbl) active_tbl = lq_sta->active_tbl; else - active_tbl = 1 - lq_sta->active_tbl; + active_tbl = rs_search_tbl(lq_sta->active_tbl); tbl = &(lq_sta->lq_info[active_tbl]); rate = &tbl->rate; @@ -2333,7 +2345,7 @@ lq_update: /* If new "search" mode was selected, set up in uCode table */ if (lq_sta->search_better_tbl) { /* Access the "search" table, clear its history. */ - tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); + tbl = &lq_sta->lq_info[rs_search_tbl(lq_sta->active_tbl)]; rs_rate_scale_clear_tbl_windows(mvm, tbl); /* Use new "search" start rate */ @@ -2676,7 +2688,7 @@ static void rs_initialize_lq(struct iwl_mvm *mvm, if (!lq_sta->search_better_tbl) active_tbl = lq_sta->active_tbl; else - active_tbl = 1 - lq_sta->active_tbl; + active_tbl = rs_search_tbl(lq_sta->active_tbl); tbl = &(lq_sta->lq_info[active_tbl]); rate = &tbl->rate; @@ -3172,9 +3184,9 @@ static void __iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, if (!lq_sta->search_better_tbl) { curr_tbl = &lq_sta->lq_info[lq_sta->active_tbl]; - other_tbl = &lq_sta->lq_info[1 - lq_sta->active_tbl]; + other_tbl = &lq_sta->lq_info[rs_search_tbl(lq_sta->active_tbl)]; } else { - curr_tbl = &lq_sta->lq_info[1 - lq_sta->active_tbl]; + curr_tbl = &lq_sta->lq_info[rs_search_tbl(lq_sta->active_tbl)]; other_tbl = &lq_sta->lq_info[lq_sta->active_tbl]; } @@ -3183,7 +3195,7 @@ static void __iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, "Neither active nor search matches tx rate\n"); tmp_tbl = &lq_sta->lq_info[lq_sta->active_tbl]; rs_dump_rate(mvm, &tmp_tbl->rate, "ACTIVE"); - tmp_tbl = &lq_sta->lq_info[1 - lq_sta->active_tbl]; + tmp_tbl = &lq_sta->lq_info[rs_search_tbl(lq_sta->active_tbl)]; rs_dump_rate(mvm, &tmp_tbl->rate, "SEARCH"); rs_dump_rate(mvm, &lq_rate, "ACTUAL"); -- cgit From 03a0995ccc0717ca0c0c7454a033c260872d45ae Mon Sep 17 00:00:00 2001 From: Ihab Zhaika Date: Mon, 15 Jul 2019 15:30:48 +0300 Subject: iwlwifi: add 3 new IDs for the 9000 series (iwl9260_2ac_160_cfg) Add a few PCI ID'S for 9000 series. Signed-off-by: Ihab Zhaika Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index ea2a03d4bf55..de711c1160d3 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -604,10 +604,13 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x2526, 0x40A4, iwl9460_2ac_cfg)}, {IWL_PCI_DEVICE(0x2526, 0x4234, iwl9560_2ac_cfg_soc)}, {IWL_PCI_DEVICE(0x2526, 0x42A4, iwl9462_2ac_cfg_soc)}, + {IWL_PCI_DEVICE(0x2526, 0x6010, iwl9260_2ac_160_cfg)}, {IWL_PCI_DEVICE(0x2526, 0x6014, iwl9260_2ac_160_cfg)}, {IWL_PCI_DEVICE(0x2526, 0x8014, iwl9260_2ac_160_cfg)}, {IWL_PCI_DEVICE(0x2526, 0x8010, iwl9260_2ac_160_cfg)}, {IWL_PCI_DEVICE(0x2526, 0xA014, iwl9260_2ac_160_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0xE010, iwl9260_2ac_160_cfg)}, + {IWL_PCI_DEVICE(0x2526, 0xE014, iwl9260_2ac_160_cfg)}, {IWL_PCI_DEVICE(0x271B, 0x0010, iwl9160_2ac_cfg)}, {IWL_PCI_DEVICE(0x271B, 0x0014, iwl9160_2ac_cfg)}, {IWL_PCI_DEVICE(0x271B, 0x0210, iwl9160_2ac_cfg)}, -- cgit From f5a47fae6aa3eb06f100e701d2342ee56b857bee Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Fri, 19 Jul 2019 12:21:59 +0300 Subject: iwlwifi: mvm: fix version check for GEO_TX_POWER_LIMIT support We erroneously added a check for FW API version 41 before sending GEO_TX_POWER_LIMIT, but this was already implemented in version 38. Additionally, it was cherry-picked to older versions, namely 17, 26 and 29, so check for those as well. Cc: stable@vger.kernel.org Fixes: eca1e56ceedd ("iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares") Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c index a837cf40afde..00c89bcfdf6a 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c @@ -886,9 +886,14 @@ static bool iwl_mvm_sar_geo_support(struct iwl_mvm *mvm) * The GEO_TX_POWER_LIMIT command is not supported on earlier * firmware versions. Unfortunately, we don't have a TLV API * flag to rely on, so rely on the major version which is in - * the first byte of ucode_ver. + * the first byte of ucode_ver. This was implemented + * initially on version 38 and then backported to 36, 29 and + * 17. */ - return IWL_UCODE_SERIAL(mvm->fw->ucode_ver) >= 41; + return IWL_UCODE_SERIAL(mvm->fw->ucode_ver) >= 38 || + IWL_UCODE_SERIAL(mvm->fw->ucode_ver) == 36 || + IWL_UCODE_SERIAL(mvm->fw->ucode_ver) == 29 || + IWL_UCODE_SERIAL(mvm->fw->ucode_ver) == 17; } int iwl_mvm_get_sar_geo_profile(struct iwl_mvm *mvm) -- cgit From 87e7e25aee6b59fef740856f4e86d4b60496c9e1 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 21 Jul 2019 14:02:27 +0300 Subject: iwlwifi: don't unmap as page memory that was mapped as single In order to remember how to unmap a memory (as single or as page), we maintain a bit per Transmit Buffer (TBs) in the meta data (structure iwl_cmd_meta). We maintain a bitmap: 1 bit per TB. If the TB is set, we will free the memory as a page. This bitmap was never cleared. Fix this. Cc: stable@vger.kernel.org Fixes: 3cd1980b0cdf ("iwlwifi: pcie: introduce new tfd and tb formats") Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/pcie/tx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c index fa4245d0d4a8..2f0ba7ef53b8 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c @@ -435,6 +435,8 @@ static void iwl_pcie_tfd_unmap(struct iwl_trans *trans, DMA_TO_DEVICE); } + meta->tbs = 0; + if (trans->cfg->use_tfh) { struct iwl_tfh_tfd *tfd_fh = (void *)tfd; -- cgit From ba3224db78034435e9ff0247277cce7c7bb1756c Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 22 Jul 2019 12:47:27 +0300 Subject: iwlwifi: mvm: fix an out-of-bound access The index for the elements of the ACPI object we dereference was static. This means that if we called the function twice we wouldn't start from 3 again, but rather from the latest index we reached in the previous call. This was dutifully reported by KASAN. Fix this. Cc: stable@vger.kernel.org Fixes: 6996490501ed ("iwlwifi: mvm: add support for EWRD (Dynamic SAR) ACPI table") Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/fw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c index 00c89bcfdf6a..5de54d1559dd 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c @@ -755,7 +755,7 @@ static int iwl_mvm_sar_get_ewrd_table(struct iwl_mvm *mvm) for (i = 0; i < n_profiles; i++) { /* the tables start at element 3 */ - static int pos = 3; + int pos = 3; /* The EWRD profiles officially go from 2 to 4, but we * save them in sar_profiles[1-3] (because we don't -- cgit From 71b256f8f7a5c09810d2c3ed6165629c2cc0a652 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 22 Jul 2019 13:02:25 +0300 Subject: iwlwifi: mvm: fix a use-after-free bug in iwl_mvm_tx_tso_segment Accessing the hdr of an skb that was consumed already isn't a good idea. First ask if the skb is a QoS packet, then keep that data on stack, and then consume the skb. This was spotted by KASAN. Cc: stable@vger.kernel.org Fixes: 08f7d8b69aaf ("iwlwifi: mvm: bring back mvm GSO code") Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index a3e5d88f1c07..6ac114a393cc 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -831,6 +831,7 @@ iwl_mvm_tx_tso_segment(struct sk_buff *skb, unsigned int num_subframes, unsigned int tcp_payload_len; unsigned int mss = skb_shinfo(skb)->gso_size; bool ipv4 = (skb->protocol == htons(ETH_P_IP)); + bool qos = ieee80211_is_data_qos(hdr->frame_control); u16 ip_base_id = ipv4 ? ntohs(ip_hdr(skb)->id) : 0; skb_shinfo(skb)->gso_size = num_subframes * mss; @@ -864,7 +865,7 @@ iwl_mvm_tx_tso_segment(struct sk_buff *skb, unsigned int num_subframes, if (tcp_payload_len > mss) { skb_shinfo(tmp)->gso_size = mss; } else { - if (ieee80211_is_data_qos(hdr->frame_control)) { + if (qos) { u8 *qc; if (ipv4) -- cgit From eeebce1862970653cdf5c01e98bc669edd8f529a Mon Sep 17 00:00:00 2001 From: Don Brace Date: Wed, 24 Jul 2019 17:08:06 -0500 Subject: scsi: hpsa: correct scsi command status issue after reset Reviewed-by: Bader Ali - Saleh Reviewed-by: Scott Teel Reviewed-by: Scott Benesh Reviewed-by: Kevin Barnett Signed-off-by: Don Brace Signed-off-by: Martin K. Petersen --- drivers/scsi/hpsa.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 43a6b5350775..89e71ebc5964 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -2334,6 +2334,8 @@ static int handle_ioaccel_mode2_error(struct ctlr_info *h, case IOACCEL2_SERV_RESPONSE_COMPLETE: switch (c2->error_data.status) { case IOACCEL2_STATUS_SR_TASK_COMP_GOOD: + if (cmd) + cmd->result = 0; break; case IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND: cmd->result |= SAM_STAT_CHECK_CONDITION; @@ -2483,8 +2485,10 @@ static void process_ioaccel2_completion(struct ctlr_info *h, /* check for good status */ if (likely(c2->error_data.serv_response == 0 && - c2->error_data.status == 0)) + c2->error_data.status == 0)) { + cmd->result = 0; return hpsa_cmd_free_and_done(h, c, cmd); + } /* * Any RAID offload error results in retry which will use @@ -5653,6 +5657,12 @@ static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd) if (c == NULL) return SCSI_MLQUEUE_DEVICE_BUSY; + /* + * This is necessary because the SML doesn't zero out this field during + * error recovery. + */ + cmd->result = 0; + /* * Call alternate submit routine for I/O accelerated commands. * Retries always go down the normal I/O path. -- cgit From 2d291e6cc183608e1f6eb8580268df7c68bdf7c3 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 18:32:10 -0500 Subject: MIPS: OProfile: Mark expected switch fall-throughs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: mips): arch/mips/oprofile/op_model_mipsxx.c: In function ‘mipsxx_cpu_stop’: arch/mips/oprofile/op_model_mipsxx.c:217:3: warning: this statement may fall through [-Wimplicit-fallthrough=] w_c0_perfctrl3(0); ^~~~~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:218:2: note: here case 3: ^~~~ arch/mips/oprofile/op_model_mipsxx.c:219:3: warning: this statement may fall through [-Wimplicit-fallthrough=] w_c0_perfctrl2(0); ^~~~~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:220:2: note: here case 2: ^~~~ arch/mips/oprofile/op_model_mipsxx.c:221:3: warning: this statement may fall through [-Wimplicit-fallthrough=] w_c0_perfctrl1(0); ^~~~~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:222:2: note: here case 1: ^~~~ arch/mips/oprofile/op_model_mipsxx.c: In function ‘mipsxx_cpu_start’: arch/mips/oprofile/op_model_mipsxx.c:197:3: warning: this statement may fall through [-Wimplicit-fallthrough=] w_c0_perfctrl3(WHAT | reg.control[3]); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:198:2: note: here case 3: ^~~~ arch/mips/oprofile/op_model_mipsxx.c:199:3: warning: this statement may fall through [-Wimplicit-fallthrough=] w_c0_perfctrl2(WHAT | reg.control[2]); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:200:2: note: here case 2: ^~~~ arch/mips/oprofile/op_model_mipsxx.c:201:3: warning: this statement may fall through [-Wimplicit-fallthrough=] w_c0_perfctrl1(WHAT | reg.control[1]); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:202:2: note: here case 1: ^~~~ arch/mips/oprofile/op_model_mipsxx.c: In function ‘reset_counters’: arch/mips/oprofile/op_model_mipsxx.c:299:3: warning: this statement may fall through [-Wimplicit-fallthrough=] w_c0_perfcntr3(0); ^~~~~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:300:2: note: here case 3: ^~~~ arch/mips/oprofile/op_model_mipsxx.c:302:3: warning: this statement may fall through [-Wimplicit-fallthrough=] w_c0_perfcntr2(0); ^~~~~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:303:2: note: here case 2: ^~~~ arch/mips/oprofile/op_model_mipsxx.c:305:3: warning: this statement may fall through [-Wimplicit-fallthrough=] w_c0_perfcntr1(0); ^~~~~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:306:2: note: here case 1: ^~~~ arch/mips/oprofile/op_model_mipsxx.c: In function ‘mipsxx_perfcount_handler’: arch/mips/oprofile/op_model_mipsxx.c:242:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((control & MIPS_PERFCTRL_IE) && \ ^ arch/mips/oprofile/op_model_mipsxx.c:248:2: note: in expansion of macro ‘HANDLE_COUNTER’ HANDLE_COUNTER(3) ^~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:239:2: note: here case n + 1: \ ^ arch/mips/oprofile/op_model_mipsxx.c:249:2: note: in expansion of macro ‘HANDLE_COUNTER’ HANDLE_COUNTER(2) ^~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:242:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((control & MIPS_PERFCTRL_IE) && \ ^ arch/mips/oprofile/op_model_mipsxx.c:249:2: note: in expansion of macro ‘HANDLE_COUNTER’ HANDLE_COUNTER(2) ^~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:239:2: note: here case n + 1: \ ^ arch/mips/oprofile/op_model_mipsxx.c:250:2: note: in expansion of macro ‘HANDLE_COUNTER’ HANDLE_COUNTER(1) ^~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:242:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((control & MIPS_PERFCTRL_IE) && \ ^ arch/mips/oprofile/op_model_mipsxx.c:250:2: note: in expansion of macro ‘HANDLE_COUNTER’ HANDLE_COUNTER(1) ^~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:239:2: note: here case n + 1: \ ^ arch/mips/oprofile/op_model_mipsxx.c:251:2: note: in expansion of macro ‘HANDLE_COUNTER’ HANDLE_COUNTER(0) ^~~~~~~~~~~~~~ CC usr/include/linux/pmu.h.s arch/mips/oprofile/op_model_mipsxx.c: In function ‘mipsxx_cpu_setup’: arch/mips/oprofile/op_model_mipsxx.c:174:3: warning: this statement may fall through [-Wimplicit-fallthrough=] w_c0_perfcntr3(reg.counter[3]); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:175:2: note: here case 3: ^~~~ arch/mips/oprofile/op_model_mipsxx.c:177:3: warning: this statement may fall through [-Wimplicit-fallthrough=] w_c0_perfcntr2(reg.counter[2]); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:178:2: note: here case 2: ^~~~ arch/mips/oprofile/op_model_mipsxx.c:180:3: warning: this statement may fall through [-Wimplicit-fallthrough=] w_c0_perfcntr1(reg.counter[1]); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/mips/oprofile/op_model_mipsxx.c:181:2: note: here case 1: ^~~~ Signed-off-by: Gustavo A. R. Silva Signed-off-by: Paul Burton Cc: Robert Richter Cc: Ralf Baechle Cc: James Hogan Cc: oprofile-list@lists.sf.net Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Kees Cook --- arch/mips/oprofile/op_model_mipsxx.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index 7c04b17f4a48..96c13a0ab078 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -172,12 +172,15 @@ static void mipsxx_cpu_setup(void *args) case 4: w_c0_perfctrl3(0); w_c0_perfcntr3(reg.counter[3]); + /* fall through */ case 3: w_c0_perfctrl2(0); w_c0_perfcntr2(reg.counter[2]); + /* fall through */ case 2: w_c0_perfctrl1(0); w_c0_perfcntr1(reg.counter[1]); + /* fall through */ case 1: w_c0_perfctrl0(0); w_c0_perfcntr0(reg.counter[0]); @@ -195,10 +198,13 @@ static void mipsxx_cpu_start(void *args) switch (counters) { case 4: w_c0_perfctrl3(WHAT | reg.control[3]); + /* fall through */ case 3: w_c0_perfctrl2(WHAT | reg.control[2]); + /* fall through */ case 2: w_c0_perfctrl1(WHAT | reg.control[1]); + /* fall through */ case 1: w_c0_perfctrl0(WHAT | reg.control[0]); } @@ -215,10 +221,13 @@ static void mipsxx_cpu_stop(void *args) switch (counters) { case 4: w_c0_perfctrl3(0); + /* fall through */ case 3: w_c0_perfctrl2(0); + /* fall through */ case 2: w_c0_perfctrl1(0); + /* fall through */ case 1: w_c0_perfctrl0(0); } @@ -236,6 +245,7 @@ static int mipsxx_perfcount_handler(void) switch (counters) { #define HANDLE_COUNTER(n) \ + /* fall through */ \ case n + 1: \ control = r_c0_perfctrl ## n(); \ counter = r_c0_perfcntr ## n(); \ @@ -297,12 +307,15 @@ static void reset_counters(void *arg) case 4: w_c0_perfctrl3(0); w_c0_perfcntr3(0); + /* fall through */ case 3: w_c0_perfctrl2(0); w_c0_perfcntr2(0); + /* fall through */ case 2: w_c0_perfctrl1(0); w_c0_perfcntr1(0); + /* fall through */ case 1: w_c0_perfctrl0(0); w_c0_perfcntr0(0); -- cgit From 18a56d699d174f3ac41f2ea86e1ca21f98b01d8f Mon Sep 17 00:00:00 2001 From: Don Brace Date: Wed, 24 Jul 2019 17:08:12 -0500 Subject: scsi: hpsa: remove printing internal cdb on tag collision Remove racy printing of internal commands. Completion thread can be cleaning up the command in parallel. Reviewed-by: Bader Ali - Saleh Reviewed-by: Scott Teel Reviewed-by: Scott Benesh Reviewed-by: Kevin Barnett Signed-off-by: Don Brace Signed-off-by: Martin K. Petersen --- drivers/scsi/hpsa.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 89e71ebc5964..bba099e53266 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -6091,8 +6091,6 @@ static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h, if (idx != h->last_collision_tag) { /* Print once per tag */ dev_warn(&h->pdev->dev, "%s: tag collision (tag=%d)\n", __func__, idx); - if (c->scsi_cmd != NULL) - scsi_print_command(c->scsi_cmd); if (scmd) scsi_print_command(scmd); h->last_collision_tag = idx; -- cgit From ac43432cb1f5c2950408534987e57c2071e24d8f Mon Sep 17 00:00:00 2001 From: Muchun Song Date: Sat, 27 Jul 2019 11:21:22 +0800 Subject: driver core: Fix use-after-free and double free on glue directory There is a race condition between removing glue directory and adding a new device under the glue dir. It can be reproduced in following test: CPU1: CPU2: device_add() get_device_parent() class_dir_create_and_add() kobject_add_internal() create_dir() // create glue_dir device_add() get_device_parent() kobject_get() // get glue_dir device_del() cleanup_glue_dir() kobject_del(glue_dir) kobject_add() kobject_add_internal() create_dir() // in glue_dir sysfs_create_dir_ns() kernfs_create_dir_ns(sd) sysfs_remove_dir() // glue_dir->sd=NULL sysfs_put() // free glue_dir->sd // sd is freed kernfs_new_node(sd) kernfs_get(glue_dir) kernfs_add_one() kernfs_put() Before CPU1 remove last child device under glue dir, if CPU2 add a new device under glue dir, the glue_dir kobject reference count will be increase to 2 via kobject_get() in get_device_parent(). And CPU2 has been called kernfs_create_dir_ns(), but not call kernfs_new_node(). Meanwhile, CPU1 call sysfs_remove_dir() and sysfs_put(). This result in glue_dir->sd is freed and it's reference count will be 0. Then CPU2 call kernfs_get(glue_dir) will trigger a warning in kernfs_get() and increase it's reference count to 1. Because glue_dir->sd is freed by CPU1, the next call kernfs_add_one() by CPU2 will fail(This is also use-after-free) and call kernfs_put() to decrease reference count. Because the reference count is decremented to 0, it will also call kmem_cache_free() to free the glue_dir->sd again. This will result in double free. In order to avoid this happening, we also should make sure that kernfs_node for glue_dir is released in CPU1 only when refcount for glue_dir kobj is 1 to fix this race. The following calltrace is captured in kernel 4.14 with the following patch applied: commit 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier") -------------------------------------------------------------------------- [ 3.633703] WARNING: CPU: 4 PID: 513 at .../fs/kernfs/dir.c:494 Here is WARN_ON(!atomic_read(&kn->count) in kernfs_get(). .... [ 3.633986] Call trace: [ 3.633991] kernfs_create_dir_ns+0xa8/0xb0 [ 3.633994] sysfs_create_dir_ns+0x54/0xe8 [ 3.634001] kobject_add_internal+0x22c/0x3f0 [ 3.634005] kobject_add+0xe4/0x118 [ 3.634011] device_add+0x200/0x870 [ 3.634017] _request_firmware+0x958/0xc38 [ 3.634020] request_firmware_into_buf+0x4c/0x70 .... [ 3.634064] kernel BUG at .../mm/slub.c:294! Here is BUG_ON(object == fp) in set_freepointer(). .... [ 3.634346] Call trace: [ 3.634351] kmem_cache_free+0x504/0x6b8 [ 3.634355] kernfs_put+0x14c/0x1d8 [ 3.634359] kernfs_create_dir_ns+0x88/0xb0 [ 3.634362] sysfs_create_dir_ns+0x54/0xe8 [ 3.634366] kobject_add_internal+0x22c/0x3f0 [ 3.634370] kobject_add+0xe4/0x118 [ 3.634374] device_add+0x200/0x870 [ 3.634378] _request_firmware+0x958/0xc38 [ 3.634381] request_firmware_into_buf+0x4c/0x70 -------------------------------------------------------------------------- Fixes: 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier") Signed-off-by: Muchun Song Reviewed-by: Mukesh Ojha Signed-off-by: Prateek Sood Link: https://lore.kernel.org/r/20190727032122.24639-1-smuchun@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 52 insertions(+), 1 deletion(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index da84a73f2ba6..c83d7e87764a 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1820,12 +1820,63 @@ static inline struct kobject *get_glue_dir(struct device *dev) */ static void cleanup_glue_dir(struct device *dev, struct kobject *glue_dir) { + unsigned int ref; + /* see if we live in a "glue" directory */ if (!live_in_glue_dir(glue_dir, dev)) return; mutex_lock(&gdp_mutex); - if (!kobject_has_children(glue_dir)) + /** + * There is a race condition between removing glue directory + * and adding a new device under the glue directory. + * + * CPU1: CPU2: + * + * device_add() + * get_device_parent() + * class_dir_create_and_add() + * kobject_add_internal() + * create_dir() // create glue_dir + * + * device_add() + * get_device_parent() + * kobject_get() // get glue_dir + * + * device_del() + * cleanup_glue_dir() + * kobject_del(glue_dir) + * + * kobject_add() + * kobject_add_internal() + * create_dir() // in glue_dir + * sysfs_create_dir_ns() + * kernfs_create_dir_ns(sd) + * + * sysfs_remove_dir() // glue_dir->sd=NULL + * sysfs_put() // free glue_dir->sd + * + * // sd is freed + * kernfs_new_node(sd) + * kernfs_get(glue_dir) + * kernfs_add_one() + * kernfs_put() + * + * Before CPU1 remove last child device under glue dir, if CPU2 add + * a new device under glue dir, the glue_dir kobject reference count + * will be increase to 2 in kobject_get(k). And CPU2 has been called + * kernfs_create_dir_ns(). Meanwhile, CPU1 call sysfs_remove_dir() + * and sysfs_put(). This result in glue_dir->sd is freed. + * + * Then the CPU2 will see a stale "empty" but still potentially used + * glue dir around in kernfs_new_node(). + * + * In order to avoid this happening, we also should make sure that + * kernfs_node for glue_dir is released in CPU1 only when refcount + * for glue_dir kobj is 1. + */ + ref = kref_read(&glue_dir->kref); + if (!kobject_has_children(glue_dir) && !--ref) kobject_del(glue_dir); kobject_put(glue_dir); mutex_unlock(&gdp_mutex); -- cgit From df9a606184bfdb5ae3ca9d226184e9489f5c24f7 Mon Sep 17 00:00:00 2001 From: Suganath Prabu Date: Tue, 30 Jul 2019 03:43:57 -0400 Subject: scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA Although SAS3 & SAS3.5 IT HBA controllers support 64-bit DMA addressing, as per hardware design, if DMA-able range contains all 64-bits set (0xFFFFFFFF-FFFFFFFF) then it results in a firmware fault. E.g. SGE's start address is 0xFFFFFFFF-FFFF000 and data length is 0x1000 bytes. when HBA tries to DMA the data at 0xFFFFFFFF-FFFFFFFF location then HBA will fault the firmware. Driver will set 63-bit DMA mask to ensure the above address will not be used. Cc: # 5.1.20+ Signed-off-by: Suganath Prabu Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_base.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 684662888792..050c0f029ef9 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -2703,6 +2703,8 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) { u64 required_mask, coherent_mask; struct sysinfo s; + /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */ + int dma_mask = (ioc->hba_mpi_version_belonged > MPI2_VERSION) ? 63 : 64; if (ioc->is_mcpu_endpoint) goto try_32bit; @@ -2712,17 +2714,17 @@ _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) goto try_32bit; if (ioc->dma_mask) - coherent_mask = DMA_BIT_MASK(64); + coherent_mask = DMA_BIT_MASK(dma_mask); else coherent_mask = DMA_BIT_MASK(32); - if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) || + if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(dma_mask)) || dma_set_coherent_mask(&pdev->dev, coherent_mask)) goto try_32bit; ioc->base_add_sg_single = &_base_add_sg_single_64; ioc->sge_size = sizeof(Mpi2SGESimple64_t); - ioc->dma_mask = 64; + ioc->dma_mask = dma_mask; goto out; try_32bit: @@ -2744,7 +2746,7 @@ static int _base_change_consistent_dma_mask(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) { - if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) { + if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(ioc->dma_mask))) { if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) return -ENODEV; } @@ -4989,7 +4991,7 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) total_sz += sz; } while (ioc->rdpq_array_enable && (++i < ioc->reply_queue_count)); - if (ioc->dma_mask == 64) { + if (ioc->dma_mask > 32) { if (_base_change_consistent_dma_mask(ioc, ioc->pdev) != 0) { ioc_warn(ioc, "no suitable consistent DMA mask for %s\n", pci_name(ioc->pdev)); -- cgit From e82f04ec6ba91065fd33a6201ffd7cab840e1475 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Mon, 29 Jul 2019 16:44:51 +0800 Subject: scsi: qla2xxx: Fix possible fcport null-pointer dereferences In qla2x00_alloc_fcport(), fcport is assigned to NULL in the error handling code on line 4880: fcport = NULL; Then fcport is used on lines 4883-4886: INIT_WORK(&fcport->del_work, qla24xx_delete_sess_fn); INIT_WORK(&fcport->reg_work, qla_register_fcport_fn); INIT_LIST_HEAD(&fcport->gnl_entry); INIT_LIST_HEAD(&fcport->list); Thus, possible null-pointer dereferences may occur. To fix these bugs, qla2x00_alloc_fcport() directly returns NULL in the error handling code. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 4059655639d9..da83034d4759 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -4877,7 +4877,7 @@ qla2x00_alloc_fcport(scsi_qla_host_t *vha, gfp_t flags) ql_log(ql_log_warn, vha, 0xd049, "Failed to allocate ct_sns request.\n"); kfree(fcport); - fcport = NULL; + return NULL; } INIT_WORK(&fcport->del_work, qla24xx_delete_sess_fn); -- cgit From ab98c008ac761752cdc27f9eb053419feadeb2f7 Mon Sep 17 00:00:00 2001 From: Hubert Feurstein Date: Tue, 30 Jul 2019 11:46:23 +0200 Subject: net: phy: fixed_phy: print gpio error only if gpio node is present It is perfectly ok to not have an gpio attached to the fixed-link node. So the driver should not throw an error message when the gpio is missing. Fixes: 5468e82f7034 ("net: phy: fixed-phy: Drop GPIO from fixed_phy_add()") Signed-off-by: Hubert Feurstein Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/fixed_phy.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c index 3ffe46df249e..7c5265fd2b94 100644 --- a/drivers/net/phy/fixed_phy.c +++ b/drivers/net/phy/fixed_phy.c @@ -216,8 +216,10 @@ static struct gpio_desc *fixed_phy_get_gpiod(struct device_node *np) if (IS_ERR(gpiod)) { if (PTR_ERR(gpiod) == -EPROBE_DEFER) return gpiod; - pr_err("error getting GPIO for fixed link %pOF, proceed without\n", - fixed_link_node); + + if (PTR_ERR(gpiod) != -ENOENT) + pr_err("error getting GPIO for fixed link %pOF, proceed without\n", + fixed_link_node); gpiod = NULL; } -- cgit From 43c8e0ae76bdcb5c00b381c294c176b373316c8d Mon Sep 17 00:00:00 2001 From: Hubert Feurstein Date: Tue, 30 Jul 2019 12:11:42 +0200 Subject: net: dsa: mv88e6xxx: use link-down-define instead of plain value Using the define here makes the code more expressive. Signed-off-by: Hubert Feurstein Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index c97dea4599a8..a0f288efcc12 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -430,7 +430,7 @@ int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port, int link, return 0; /* Port's MAC control must not be changed unless the link is down */ - err = chip->info->ops->port_set_link(chip, port, 0); + err = chip->info->ops->port_set_link(chip, port, LINK_FORCED_DOWN); if (err) return err; -- cgit From 2ad07086a557efdd80dd036f7b843bd3c51b81c2 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 30 Jul 2019 12:47:52 +0100 Subject: mlxsw: spectrum_ptp: fix duplicated check on orig_egr_types Currently are duplicated checks on orig_egr_types which are redundant, I believe this is a typo and should actually be orig_ing_types || orig_egr_types instead of the expression orig_egr_types || orig_egr_types. Fix these. Addresses-Coverity: ("Same on both sides") Fixes: c6b36bdd04b5 ("mlxsw: spectrum_ptp: Increase parsing depth when PTP is enabled") Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c index 98c5ba3200bc..63b07edd9d81 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c @@ -999,14 +999,14 @@ static int mlxsw_sp1_ptp_mtpppc_update(struct mlxsw_sp_port *mlxsw_sp_port, } } - if ((ing_types || egr_types) && !(orig_egr_types || orig_egr_types)) { + if ((ing_types || egr_types) && !(orig_ing_types || orig_egr_types)) { err = mlxsw_sp_nve_inc_parsing_depth_get(mlxsw_sp); if (err) { netdev_err(mlxsw_sp_port->dev, "Failed to increase parsing depth"); return err; } } - if (!(ing_types || egr_types) && (orig_egr_types || orig_egr_types)) + if (!(ing_types || egr_types) && (orig_ing_types || orig_egr_types)) mlxsw_sp_nve_inc_parsing_depth_put(mlxsw_sp); return mlxsw_sp1_ptp_mtpppc_set(mlxsw_sp_port->mlxsw_sp, -- cgit From 3caa61c208753492fe59efb20e06f7c608eb8db2 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Tue, 30 Jul 2019 15:57:16 +0200 Subject: net: stmmac: Sync RX Buffer upon allocation With recent changes that introduced support for Page Pool in stmmac, Jon reported that NFS boot was no longer working on an ARM64 based platform that had the IP behind an IOMMU. As Page Pool API does not guarantee DMA syncing because of the use of DMA_ATTR_SKIP_CPU_SYNC flag, we have to explicit sync the whole buffer upon re-allocation because we are always re-using same pages. In fact, ARM64 code invalidates the DMA area upon two situations [1]: - sync_single_for_cpu(): Invalidates if direction != DMA_TO_DEVICE - sync_single_for_device(): Invalidates if direction == DMA_FROM_DEVICE So, as we must invalidate both the current RX buffer and the newly allocated buffer we propose this fix. [1] arch/arm64/mm/cache.S Reported-by: Jon Hunter Tested-by: Jon Hunter Fixes: 2af6106ae949 ("net: stmmac: Introducing support for Page Pool") Signed-off-by: Jose Abreu Tested-by: Ezequiel Garcia Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 98b1a5c6d537..9a4a56ad35cd 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3271,9 +3271,11 @@ static inline int stmmac_rx_threshold_count(struct stmmac_rx_queue *rx_q) static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue) { struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue]; - int dirty = stmmac_rx_dirty(priv, queue); + int len, dirty = stmmac_rx_dirty(priv, queue); unsigned int entry = rx_q->dirty_rx; + len = DIV_ROUND_UP(priv->dma_buf_sz, PAGE_SIZE) * PAGE_SIZE; + while (dirty-- > 0) { struct stmmac_rx_buffer *buf = &rx_q->buf_pool[entry]; struct dma_desc *p; @@ -3291,6 +3293,13 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv, u32 queue) } buf->addr = page_pool_get_dma_addr(buf->page); + + /* Sync whole allocation to device. This will invalidate old + * data. + */ + dma_sync_single_for_device(priv->device, buf->addr, len, + DMA_FROM_DEVICE); + stmmac_set_desc_addr(priv, p, buf->addr); stmmac_refill_desc3(priv, rx_q, p); @@ -3425,8 +3434,6 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue) skb_copy_to_linear_data(skb, page_address(buf->page), frame_len); skb_put(skb, frame_len); - dma_sync_single_for_device(priv->device, buf->addr, - frame_len, DMA_FROM_DEVICE); if (netif_msg_pktdata(priv)) { netdev_dbg(priv->dev, "frame received (%dbytes)", -- cgit From 5f4e4203add2b860d2345312509a160f8292063b Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Tue, 30 Jul 2019 22:29:59 +0800 Subject: enetc: Fix build error without PHYLIB If PHYLIB is not set, build enetc will fails: drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_open': enetc.c: undefined reference to `phy_disconnect' enetc.c: undefined reference to `phy_start' drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_close': enetc.c: undefined reference to `phy_stop' enetc.c: undefined reference to `phy_disconnect' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o: undefined reference to `phy_ethtool_get_link_ksettings' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o: undefined reference to `phy_ethtool_set_link_ksettings' drivers/net/ethernet/freescale/enetc/enetc_mdio.o: In function `enetc_mdio_probe': enetc_mdio.c: undefined reference to `mdiobus_alloc_size' enetc_mdio.c: undefined reference to `mdiobus_free' Reported-by: Hulk Robot Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: YueHaibing Acked-by: Claudiu Manoil Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/enetc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/freescale/enetc/Kconfig b/drivers/net/ethernet/freescale/enetc/Kconfig index ed0d010c7cf2..46fdf36bfece 100644 --- a/drivers/net/ethernet/freescale/enetc/Kconfig +++ b/drivers/net/ethernet/freescale/enetc/Kconfig @@ -2,6 +2,7 @@ config FSL_ENETC tristate "ENETC PF driver" depends on PCI && PCI_MSI && (ARCH_LAYERSCAPE || COMPILE_TEST) + select PHYLIB help This driver supports NXP ENETC gigabit ethernet controller PCIe physical function (PF) devices, managing ENETC Ports at a privileged -- cgit From 30b692d3b390c6fe78a5064be0c4bbd44a41be59 Mon Sep 17 00:00:00 2001 From: Christian Brauner Date: Mon, 29 Jul 2019 17:48:24 +0200 Subject: exit: make setting exit_state consistent Since commit b191d6491be6 ("pidfd: fix a poll race when setting exit_state") we unconditionally set exit_state to EXIT_ZOMBIE before calling into do_notify_parent(). This was done to eliminate a race when querying exit_state in do_notify_pidfd(). Back then we decided to do the absolute minimal thing to fix this and not touch the rest of the exit_notify() function where exit_state is set. Since this fix has not caused any issues change the setting of exit_state to EXIT_DEAD in the autoreap case to account for the fact hat exit_state is set to EXIT_ZOMBIE unconditionally. This fix was planned but also explicitly requested in [1] and makes the whole code more consistent. /* References */ [1]: https://lore.kernel.org/lkml/CAHk-=wigcxGFR2szue4wavJtH5cYTTeNES=toUBVGsmX0rzX+g@mail.gmail.com Signed-off-by: Christian Brauner Acked-by: Oleg Nesterov Cc: Linus Torvalds --- kernel/exit.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/exit.c b/kernel/exit.c index 4436158a6d30..5b4a5dcce8f8 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -734,9 +734,10 @@ static void exit_notify(struct task_struct *tsk, int group_dead) autoreap = true; } - tsk->exit_state = autoreap ? EXIT_DEAD : EXIT_ZOMBIE; - if (tsk->exit_state == EXIT_DEAD) + if (autoreap) { + tsk->exit_state = EXIT_DEAD; list_add(&tsk->ptrace_entry, &dead); + } /* mt-exec, de_thread() is waiting for group leader */ if (unlikely(tsk->signal->notify_count < 0)) -- cgit From afa1d96d1430c2138c545fb76e6dcb21222098d4 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Tue, 30 Jul 2019 11:28:20 -0700 Subject: xfs: Fix possible null-pointer dereferences in xchk_da_btree_block_check_sibling() In xchk_da_btree_block_check_sibling(), there is an if statement on line 274 to check whether ds->state->altpath.blk[level].bp is NULL: if (ds->state->altpath.blk[level].bp) When ds->state->altpath.blk[level].bp is NULL, it is used on line 281: xfs_trans_brelse(..., ds->state->altpath.blk[level].bp); struct xfs_buf_log_item *bip = bp->b_log_item; ASSERT(bp->b_transp == tp); Thus, possible null-pointer dereferences may occur. To fix these bugs, ds->state->altpath.blk[level].bp is checked before being used. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by: Jia-Ju Bai Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong --- fs/xfs/scrub/dabtree.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/xfs/scrub/dabtree.c b/fs/xfs/scrub/dabtree.c index 94c4f1de1922..77ff9f97bcda 100644 --- a/fs/xfs/scrub/dabtree.c +++ b/fs/xfs/scrub/dabtree.c @@ -278,7 +278,11 @@ xchk_da_btree_block_check_sibling( /* Compare upper level pointer to sibling pointer. */ if (ds->state->altpath.blk[level].blkno != sibling) xchk_da_set_corrupt(ds, level); - xfs_trans_brelse(ds->dargs.trans, ds->state->altpath.blk[level].bp); + if (ds->state->altpath.blk[level].bp) { + xfs_trans_brelse(ds->dargs.trans, + ds->state->altpath.blk[level].bp); + ds->state->altpath.blk[level].bp = NULL; + } out: return error; } -- cgit From 89e524c04fa966330e2e80ab2bc50b9944c5847a Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Tue, 30 Jul 2019 13:10:14 +0200 Subject: loop: Fix mount(2) failure due to race with LOOP_SET_FD Commit 33ec3e53e7b1 ("loop: Don't change loop device under exclusive opener") made LOOP_SET_FD ioctl acquire exclusive block device reference while it updates loop device binding. However this can make perfectly valid mount(2) fail with EBUSY due to racing LOOP_SET_FD holding temporarily the exclusive bdev reference in cases like this: for i in {a..z}{a..z}; do dd if=/dev/zero of=$i.image bs=1k count=0 seek=1024 mkfs.ext2 $i.image mkdir mnt$i done echo "Run" for i in {a..z}{a..z}; do mount -o loop -t ext2 $i.image mnt$i & done Fix the problem by not getting full exclusive bdev reference in LOOP_SET_FD but instead just mark the bdev as being claimed while we update the binding information. This just blocks new exclusive openers instead of failing them with EBUSY thus fixing the problem. Fixes: 33ec3e53e7b1 ("loop: Don't change loop device under exclusive opener") Cc: stable@vger.kernel.org Tested-by: Kai-Heng Feng Signed-off-by: Jan Kara Signed-off-by: Jens Axboe --- drivers/block/loop.c | 16 +++++----- fs/block_dev.c | 83 ++++++++++++++++++++++++++++++++++++---------------- include/linux/fs.h | 6 ++++ 3 files changed, 73 insertions(+), 32 deletions(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 44c9985f352a..3036883fc9f8 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -924,6 +924,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode, struct file *file; struct inode *inode; struct address_space *mapping; + struct block_device *claimed_bdev = NULL; int lo_flags = 0; int error; loff_t size; @@ -942,10 +943,11 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode, * here to avoid changing device under exclusive owner. */ if (!(mode & FMODE_EXCL)) { - bdgrab(bdev); - error = blkdev_get(bdev, mode | FMODE_EXCL, loop_set_fd); - if (error) + claimed_bdev = bd_start_claiming(bdev, loop_set_fd); + if (IS_ERR(claimed_bdev)) { + error = PTR_ERR(claimed_bdev); goto out_putf; + } } error = mutex_lock_killable(&loop_ctl_mutex); @@ -1015,15 +1017,15 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode, mutex_unlock(&loop_ctl_mutex); if (partscan) loop_reread_partitions(lo, bdev); - if (!(mode & FMODE_EXCL)) - blkdev_put(bdev, mode | FMODE_EXCL); + if (claimed_bdev) + bd_abort_claiming(bdev, claimed_bdev, loop_set_fd); return 0; out_unlock: mutex_unlock(&loop_ctl_mutex); out_bdev: - if (!(mode & FMODE_EXCL)) - blkdev_put(bdev, mode | FMODE_EXCL); + if (claimed_bdev) + bd_abort_claiming(bdev, claimed_bdev, loop_set_fd); out_putf: fput(file); out: diff --git a/fs/block_dev.c b/fs/block_dev.c index c2a85b587922..22591bad9353 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -1181,8 +1181,7 @@ static struct gendisk *bdev_get_gendisk(struct block_device *bdev, int *partno) * Pointer to the block device containing @bdev on success, ERR_PTR() * value on failure. */ -static struct block_device *bd_start_claiming(struct block_device *bdev, - void *holder) +struct block_device *bd_start_claiming(struct block_device *bdev, void *holder) { struct gendisk *disk; struct block_device *whole; @@ -1229,6 +1228,62 @@ static struct block_device *bd_start_claiming(struct block_device *bdev, return ERR_PTR(err); } } +EXPORT_SYMBOL(bd_start_claiming); + +static void bd_clear_claiming(struct block_device *whole, void *holder) +{ + lockdep_assert_held(&bdev_lock); + /* tell others that we're done */ + BUG_ON(whole->bd_claiming != holder); + whole->bd_claiming = NULL; + wake_up_bit(&whole->bd_claiming, 0); +} + +/** + * bd_finish_claiming - finish claiming of a block device + * @bdev: block device of interest + * @whole: whole block device (returned from bd_start_claiming()) + * @holder: holder that has claimed @bdev + * + * Finish exclusive open of a block device. Mark the device as exlusively + * open by the holder and wake up all waiters for exclusive open to finish. + */ +void bd_finish_claiming(struct block_device *bdev, struct block_device *whole, + void *holder) +{ + spin_lock(&bdev_lock); + BUG_ON(!bd_may_claim(bdev, whole, holder)); + /* + * Note that for a whole device bd_holders will be incremented twice, + * and bd_holder will be set to bd_may_claim before being set to holder + */ + whole->bd_holders++; + whole->bd_holder = bd_may_claim; + bdev->bd_holders++; + bdev->bd_holder = holder; + bd_clear_claiming(whole, holder); + spin_unlock(&bdev_lock); +} +EXPORT_SYMBOL(bd_finish_claiming); + +/** + * bd_abort_claiming - abort claiming of a block device + * @bdev: block device of interest + * @whole: whole block device (returned from bd_start_claiming()) + * @holder: holder that has claimed @bdev + * + * Abort claiming of a block device when the exclusive open failed. This can be + * also used when exclusive open is not actually desired and we just needed + * to block other exclusive openers for a while. + */ +void bd_abort_claiming(struct block_device *bdev, struct block_device *whole, + void *holder) +{ + spin_lock(&bdev_lock); + bd_clear_claiming(whole, holder); + spin_unlock(&bdev_lock); +} +EXPORT_SYMBOL(bd_abort_claiming); #ifdef CONFIG_SYSFS struct bd_holder_disk { @@ -1698,29 +1753,7 @@ int blkdev_get(struct block_device *bdev, fmode_t mode, void *holder) /* finish claiming */ mutex_lock(&bdev->bd_mutex); - spin_lock(&bdev_lock); - - if (!res) { - BUG_ON(!bd_may_claim(bdev, whole, holder)); - /* - * Note that for a whole device bd_holders - * will be incremented twice, and bd_holder - * will be set to bd_may_claim before being - * set to holder - */ - whole->bd_holders++; - whole->bd_holder = bd_may_claim; - bdev->bd_holders++; - bdev->bd_holder = holder; - } - - /* tell others that we're done */ - BUG_ON(whole->bd_claiming != holder); - whole->bd_claiming = NULL; - wake_up_bit(&whole->bd_claiming, 0); - - spin_unlock(&bdev_lock); - + bd_finish_claiming(bdev, whole, holder); /* * Block event polling for write claims if requested. Any * write holder makes the write_holder state stick until diff --git a/include/linux/fs.h b/include/linux/fs.h index 56b8e358af5c..997a530ff4e9 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2598,6 +2598,12 @@ extern struct block_device *blkdev_get_by_path(const char *path, fmode_t mode, void *holder); extern struct block_device *blkdev_get_by_dev(dev_t dev, fmode_t mode, void *holder); +extern struct block_device *bd_start_claiming(struct block_device *bdev, + void *holder); +extern void bd_finish_claiming(struct block_device *bdev, + struct block_device *whole, void *holder); +extern void bd_abort_claiming(struct block_device *bdev, + struct block_device *whole, void *holder); extern void blkdev_put(struct block_device *bdev, fmode_t mode); extern int __blkdev_reread_part(struct block_device *bdev); extern int blkdev_reread_part(struct block_device *bdev); -- cgit From 2948a1fcd77a8bb11604387e3fc52f0ebf5729e9 Mon Sep 17 00:00:00 2001 From: Jon Maloy Date: Tue, 30 Jul 2019 20:19:10 +0200 Subject: tipc: fix unitilized skb list crash Our test suite somtimes provokes the following crash: Description of problem: [ 1092.597234] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8 [ 1092.605072] PGD 0 P4D 0 [ 1092.607620] Oops: 0000 [#1] SMP PTI [ 1092.611118] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Not tainted 4.18.0-122.el8.x86_64 #1 [ 1092.619724] Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 1.3.7 02/08/2018 [ 1092.627215] RIP: 0010:tipc_mcast_filter_msg+0x93/0x2d0 [tipc] [ 1092.632955] Code: 0f 84 aa 01 00 00 89 cf 4d 01 ca 4c 8b 26 c1 ef 19 83 e7 0f 83 ff 0c 4d 0f 45 d1 41 8b 6a 10 0f cd 4c 39 e6 0f 84 81 01 00 00 <4d> 8b 9c 24 e8 00 00 00 45 8b 13 41 0f ca 44 89 d7 c1 ef 13 83 e7 [ 1092.651703] RSP: 0018:ffff929e5fa83a18 EFLAGS: 00010282 [ 1092.656927] RAX: ffff929e3fb38100 RBX: 00000000069f29ee RCX: 00000000416c0045 [ 1092.664058] RDX: ffff929e5fa83a88 RSI: ffff929e31a28420 RDI: 0000000000000000 [ 1092.671209] RBP: 0000000029b11821 R08: 0000000000000000 R09: ffff929e39b4407a [ 1092.678343] R10: ffff929e39b4407a R11: 0000000000000007 R12: 0000000000000000 [ 1092.685475] R13: 0000000000000001 R14: ffff929e3fb38100 R15: ffff929e39b4407a [ 1092.692614] FS: 0000000000000000(0000) GS:ffff929e5fa80000(0000) knlGS:0000000000000000 [ 1092.700702] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1092.706447] CR2: 00000000000000e8 CR3: 000000031300a004 CR4: 00000000007606e0 [ 1092.713579] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1092.720712] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1092.727843] PKRU: 55555554 [ 1092.730556] Call Trace: [ 1092.733010] [ 1092.735034] tipc_sk_filter_rcv+0x7ca/0xb80 [tipc] [ 1092.739828] ? __kmalloc_node_track_caller+0x1cb/0x290 [ 1092.744974] ? dev_hard_start_xmit+0xa5/0x210 [ 1092.749332] tipc_sk_rcv+0x389/0x640 [tipc] [ 1092.753519] tipc_sk_mcast_rcv+0x23c/0x3a0 [tipc] [ 1092.758224] tipc_rcv+0x57a/0xf20 [tipc] [ 1092.762154] ? ktime_get_real_ts64+0x40/0xe0 [ 1092.766432] ? tpacket_rcv+0x50/0x9f0 [ 1092.770098] tipc_l2_rcv_msg+0x4a/0x70 [tipc] [ 1092.774452] __netif_receive_skb_core+0xb62/0xbd0 [ 1092.779164] ? enqueue_entity+0xf6/0x630 [ 1092.783084] ? kmem_cache_alloc+0x158/0x1c0 [ 1092.787272] ? __build_skb+0x25/0xd0 [ 1092.790849] netif_receive_skb_internal+0x42/0xf0 [ 1092.795557] napi_gro_receive+0xba/0xe0 [ 1092.799417] mlx5e_handle_rx_cqe+0x83/0xd0 [mlx5_core] [ 1092.804564] mlx5e_poll_rx_cq+0xd5/0x920 [mlx5_core] [ 1092.809536] mlx5e_napi_poll+0xb2/0xce0 [mlx5_core] [ 1092.814415] ? __wake_up_common_lock+0x89/0xc0 [ 1092.818861] net_rx_action+0x149/0x3b0 [ 1092.822616] __do_softirq+0xe3/0x30a [ 1092.826193] irq_exit+0x100/0x110 [ 1092.829512] do_IRQ+0x85/0xd0 [ 1092.832483] common_interrupt+0xf/0xf [ 1092.836147] [ 1092.838255] RIP: 0010:cpuidle_enter_state+0xb7/0x2a0 [ 1092.843221] Code: e8 3e 79 a5 ff 80 7c 24 03 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 d7 01 00 00 31 ff e8 a0 6b ab ff fb 66 0f 1f 44 00 00 <48> b8 ff ff ff ff f3 01 00 00 4c 29 f3 ba ff ff ff 7f 48 39 c3 7f [ 1092.861967] RSP: 0018:ffffaa5ec6533e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd [ 1092.869530] RAX: ffff929e5faa3100 RBX: 000000fe63dd2092 RCX: 000000000000001f [ 1092.876665] RDX: 000000fe63dd2092 RSI: 000000003a518aaa RDI: 0000000000000000 [ 1092.883795] RBP: 0000000000000003 R08: 0000000000000004 R09: 0000000000022940 [ 1092.890929] R10: 0000040cb0666b56 R11: ffff929e5faa20a8 R12: ffff929e5faade78 [ 1092.898060] R13: ffffffffb59258f8 R14: 000000fe60f3228d R15: 0000000000000000 [ 1092.905196] ? cpuidle_enter_state+0x92/0x2a0 [ 1092.909555] do_idle+0x236/0x280 [ 1092.912785] cpu_startup_entry+0x6f/0x80 [ 1092.916715] start_secondary+0x1a7/0x200 [ 1092.920642] secondary_startup_64+0xb7/0xc0 [...] The reason is that the skb list tipc_socket::mc_method.deferredq only is initialized for connectionless sockets, while nothing stops arriving multicast messages from being filtered by connection oriented sockets, with subsequent access to the said list. We fix this by initializing the list unconditionally at socket creation. This eliminates the crash, while the message still is dropped further down in tipc_sk_filter_rcv() as it should be. Reported-by: Li Shuang Signed-off-by: Jon Maloy Reviewed-by: Xin Long Signed-off-by: David S. Miller --- net/tipc/socket.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/tipc/socket.c b/net/tipc/socket.c index dd8537f988c4..83ae41d7e554 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -485,9 +485,8 @@ static int tipc_sk_create(struct net *net, struct socket *sock, tsk_set_unreturnable(tsk, true); if (sock->type == SOCK_DGRAM) tsk_set_unreliable(tsk, true); - __skb_queue_head_init(&tsk->mc_method.deferredq); } - + __skb_queue_head_init(&tsk->mc_method.deferredq); trace_tipc_sk_create(sk, NULL, TIPC_DUMP_NONE, " "); return 0; } -- cgit From 055d88242a6046a1ceac3167290f054c72571cd9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 30 Jul 2019 21:25:20 +0200 Subject: compat_ioctl: pppoe: fix PPPOEIOCSFWD handling Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in linux-2.5.69 along with hundreds of other commands, but was always broken sincen only the structure is compatible, but the command number is not, due to the size being sizeof(size_t), or at first sizeof(sizeof((struct sockaddr_pppox)), which is different on 64-bit architectures. Guillaume Nault adds: And the implementation was broken until 2016 (see 29e73269aa4d ("pppoe: fix reference counting in PPPoE proxy")), and nobody ever noticed. I should probably have removed this ioctl entirely instead of fixing it. Clearly, it has never been used. Fix it by adding a compat_ioctl handler for all pppoe variants that translates the command number and then calls the regular ioctl function. All other ioctl commands handled by pppoe are compatible between 32-bit and 64-bit, and require compat_ptr() conversion. This should apply to all stable kernels. Acked-by: Guillaume Nault Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller --- drivers/net/ppp/pppoe.c | 3 +++ drivers/net/ppp/pppox.c | 13 +++++++++++++ drivers/net/ppp/pptp.c | 3 +++ fs/compat_ioctl.c | 3 --- include/linux/if_pppox.h | 3 +++ net/l2tp/l2tp_ppp.c | 3 +++ 6 files changed, 25 insertions(+), 3 deletions(-) diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c index 1d902ecb4aa8..a44dd3c8af63 100644 --- a/drivers/net/ppp/pppoe.c +++ b/drivers/net/ppp/pppoe.c @@ -1115,6 +1115,9 @@ static const struct proto_ops pppoe_ops = { .recvmsg = pppoe_recvmsg, .mmap = sock_no_mmap, .ioctl = pppox_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = pppox_compat_ioctl, +#endif }; static const struct pppox_proto pppoe_proto = { diff --git a/drivers/net/ppp/pppox.c b/drivers/net/ppp/pppox.c index 5ef422a43d70..08364f10a43f 100644 --- a/drivers/net/ppp/pppox.c +++ b/drivers/net/ppp/pppox.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -98,6 +99,18 @@ int pppox_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) EXPORT_SYMBOL(pppox_ioctl); +#ifdef CONFIG_COMPAT +int pppox_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) +{ + if (cmd == PPPOEIOCSFWD32) + cmd = PPPOEIOCSFWD; + + return pppox_ioctl(sock, cmd, (unsigned long)compat_ptr(arg)); +} + +EXPORT_SYMBOL(pppox_compat_ioctl); +#endif + static int pppox_create(struct net *net, struct socket *sock, int protocol, int kern) { diff --git a/drivers/net/ppp/pptp.c b/drivers/net/ppp/pptp.c index a8e52c8e4128..734de7de03f7 100644 --- a/drivers/net/ppp/pptp.c +++ b/drivers/net/ppp/pptp.c @@ -623,6 +623,9 @@ static const struct proto_ops pptp_ops = { .recvmsg = sock_no_recvmsg, .mmap = sock_no_mmap, .ioctl = pppox_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = pppox_compat_ioctl, +#endif }; static const struct pppox_proto pppox_pptp_proto = { diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 6e30949d9f77..a7ec2d3dff92 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -638,9 +638,6 @@ COMPATIBLE_IOCTL(PPPIOCDISCONN) COMPATIBLE_IOCTL(PPPIOCATTCHAN) COMPATIBLE_IOCTL(PPPIOCGCHAN) COMPATIBLE_IOCTL(PPPIOCGL2TPSTATS) -/* PPPOX */ -COMPATIBLE_IOCTL(PPPOEIOCSFWD) -COMPATIBLE_IOCTL(PPPOEIOCDFWD) /* Big A */ /* sparc only */ /* Big Q for sound/OSS */ diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h index 8b728750a625..69e813bcb947 100644 --- a/include/linux/if_pppox.h +++ b/include/linux/if_pppox.h @@ -80,6 +80,9 @@ extern int register_pppox_proto(int proto_num, const struct pppox_proto *pp); extern void unregister_pppox_proto(int proto_num); extern void pppox_unbind_sock(struct sock *sk);/* delete ppp-channel binding */ extern int pppox_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); +extern int pppox_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); + +#define PPPOEIOCSFWD32 _IOW(0xB1 ,0, compat_size_t) /* PPPoX socket states */ enum { diff --git a/net/l2tp/l2tp_ppp.c b/net/l2tp/l2tp_ppp.c index 1d0e5904dedf..c54cb59593ef 100644 --- a/net/l2tp/l2tp_ppp.c +++ b/net/l2tp/l2tp_ppp.c @@ -1681,6 +1681,9 @@ static const struct proto_ops pppol2tp_ops = { .recvmsg = pppol2tp_recvmsg, .mmap = sock_no_mmap, .ioctl = pppox_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = pppox_compat_ioctl, +#endif }; static const struct pppox_proto pppol2tp_proto = { -- cgit From fc2e634e997d84f2610a482b500865ef2c04fcde Mon Sep 17 00:00:00 2001 From: Aleksa Sarai Date: Sat, 20 Jul 2019 10:03:32 +1000 Subject: kselftest: save-and-restore errno to allow for %m formatting Previously, using "%m" in a ksft_* format string can result in strange output because the errno value wasn't saved before calling other libc functions. The solution is to simply save and restore the errno before we format the user-supplied format string. Signed-off-by: Aleksa Sarai Signed-off-by: Shuah Khan --- tools/testing/selftests/kselftest.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/tools/testing/selftests/kselftest.h b/tools/testing/selftests/kselftest.h index ec15c4f6af55..0ac49d91a260 100644 --- a/tools/testing/selftests/kselftest.h +++ b/tools/testing/selftests/kselftest.h @@ -10,6 +10,7 @@ #ifndef __KSELFTEST_H #define __KSELFTEST_H +#include #include #include #include @@ -81,58 +82,68 @@ static inline void ksft_print_cnts(void) static inline void ksft_print_msg(const char *msg, ...) { + int saved_errno = errno; va_list args; va_start(args, msg); printf("# "); + errno = saved_errno; vprintf(msg, args); va_end(args); } static inline void ksft_test_result_pass(const char *msg, ...) { + int saved_errno = errno; va_list args; ksft_cnt.ksft_pass++; va_start(args, msg); printf("ok %d ", ksft_test_num()); + errno = saved_errno; vprintf(msg, args); va_end(args); } static inline void ksft_test_result_fail(const char *msg, ...) { + int saved_errno = errno; va_list args; ksft_cnt.ksft_fail++; va_start(args, msg); printf("not ok %d ", ksft_test_num()); + errno = saved_errno; vprintf(msg, args); va_end(args); } static inline void ksft_test_result_skip(const char *msg, ...) { + int saved_errno = errno; va_list args; ksft_cnt.ksft_xskip++; va_start(args, msg); printf("not ok %d # SKIP ", ksft_test_num()); + errno = saved_errno; vprintf(msg, args); va_end(args); } static inline void ksft_test_result_error(const char *msg, ...) { + int saved_errno = errno; va_list args; ksft_cnt.ksft_error++; va_start(args, msg); printf("not ok %d # error ", ksft_test_num()); + errno = saved_errno; vprintf(msg, args); va_end(args); } @@ -152,10 +163,12 @@ static inline int ksft_exit_fail(void) static inline int ksft_exit_fail_msg(const char *msg, ...) { + int saved_errno = errno; va_list args; va_start(args, msg); printf("Bail out! "); + errno = saved_errno; vprintf(msg, args); va_end(args); @@ -178,10 +191,12 @@ static inline int ksft_exit_xpass(void) static inline int ksft_exit_skip(const char *msg, ...) { if (msg) { + int saved_errno = errno; va_list args; va_start(args, msg); printf("not ok %d # SKIP ", 1 + ksft_test_num()); + errno = saved_errno; vprintf(msg, args); va_end(args); } else { -- cgit From fbb01c52471c8fb4ec2422c0ab26c134bd90bbff Mon Sep 17 00:00:00 2001 From: Joe Lawrence Date: Thu, 18 Jul 2019 16:29:48 -0400 Subject: selftests/livepatch: push and pop dynamic debug config The livepatching self-tests tweak the dynamic debug config to verify the kernel log during the tests. Enhance set_dynamic_debug() so that the config changes are restored when the script exits. Note this functionality needs to keep in sync with: - dynamic_debug input/output formatting - functions affected by set_dynamic_debug() For example, push_dynamic_debug() transforms: kernel/livepatch/transition.c:530 [livepatch]klp_init_transition =_ "'%s': initializing %s transition\012" to the following: file kernel/livepatch/transition.c line 530 =_ Signed-off-by: Joe Lawrence Tested-by: Petr Mladek Signed-off-by: Shuah Khan --- tools/testing/selftests/livepatch/functions.sh | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/livepatch/functions.sh b/tools/testing/selftests/livepatch/functions.sh index edcfeace4655..79b0affd21fb 100644 --- a/tools/testing/selftests/livepatch/functions.sh +++ b/tools/testing/selftests/livepatch/functions.sh @@ -29,13 +29,27 @@ function die() { exit 1 } -# set_dynamic_debug() - setup kernel dynamic debug -# TODO - push and pop this config? +function push_dynamic_debug() { + DYNAMIC_DEBUG=$(grep '^kernel/livepatch' /sys/kernel/debug/dynamic_debug/control | \ + awk -F'[: ]' '{print "file " $1 " line " $2 " " $4}') +} + +function pop_dynamic_debug() { + if [[ -n "$DYNAMIC_DEBUG" ]]; then + echo -n "$DYNAMIC_DEBUG" > /sys/kernel/debug/dynamic_debug/control + fi +} + +# set_dynamic_debug() - save the current dynamic debug config and tweak +# it for the self-tests. Set a script exit trap +# that restores the original config. function set_dynamic_debug() { - cat << EOF > /sys/kernel/debug/dynamic_debug/control -file kernel/livepatch/* +p -func klp_try_switch_task -p -EOF + push_dynamic_debug + trap pop_dynamic_debug EXIT INT TERM HUP + cat <<-EOF > /sys/kernel/debug/dynamic_debug/control + file kernel/livepatch/* +p + func klp_try_switch_task -p + EOF } # loop_until(cmd) - loop a command until it is successful or $MAX_RETRIES, -- cgit From abb48f801396ba312e95f3c11072425221ce7401 Mon Sep 17 00:00:00 2001 From: xiaofeis Date: Sun, 28 Jul 2019 08:57:50 +0800 Subject: net: dsa: qca8k: enable port flow control Set phy device advertising to enable MAC flow control. Signed-off-by: Xiaofei Shen Signed-off-by: David S. Miller --- drivers/net/dsa/qca8k.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index 232e8cc96f6d..e429e92dedf4 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -2,7 +2,7 @@ /* * Copyright (C) 2009 Felix Fietkau * Copyright (C) 2011-2012 Gabor Juhos - * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved. * Copyright (c) 2016 John Crispin */ @@ -935,6 +935,8 @@ qca8k_port_enable(struct dsa_switch *ds, int port, qca8k_port_set_status(priv, port, 1); priv->port_sts[port].enabled = 1; + phy_support_asym_pause(phy); + return 0; } -- cgit From a9446a906f52292c52ecbd5be78eaa4d8395756c Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 28 Jul 2019 15:12:52 +0200 Subject: lib/vdso/32: Remove inconsistent NULL pointer checks The 32bit variants of vdso_clock_gettime()/getres() have a NULL pointer check for the timespec pointer. That's inconsistent vs. 64bit. But the vdso implementation will never be consistent versus the syscall because the only case which it can handle is NULL. Any other invalid pointer will cause a segfault. So special casing NULL is not really useful. Remove it along with the superflouos syscall fallback invocation as that will return -EFAULT anyway. That also gets rid of the dubious typecast which only works because the pointer is NULL. Fixes: 00b26474c2f1 ("lib/vdso: Provide generic VDSO implementation") Signed-off-by: Thomas Gleixner Tested-by: Vincenzo Frascino Reviewed-by: Vincenzo Frascino Reviewed-by: Andy Lutomirski Link: https://lkml.kernel.org/r/20190728131648.587523358@linutronix.de --- lib/vdso/gettimeofday.c | 18 ++---------------- 1 file changed, 2 insertions(+), 16 deletions(-) diff --git a/lib/vdso/gettimeofday.c b/lib/vdso/gettimeofday.c index 2d1c1f241fd9..e28f5a607a5f 100644 --- a/lib/vdso/gettimeofday.c +++ b/lib/vdso/gettimeofday.c @@ -115,9 +115,6 @@ __cvdso_clock_gettime32(clockid_t clock, struct old_timespec32 *res) struct __kernel_timespec ts; int ret; - if (res == NULL) - goto fallback; - ret = __cvdso_clock_gettime(clock, &ts); if (ret == 0) { @@ -126,9 +123,6 @@ __cvdso_clock_gettime32(clockid_t clock, struct old_timespec32 *res) } return ret; - -fallback: - return clock_gettime_fallback(clock, (struct __kernel_timespec *)res); } static __maybe_unused int @@ -204,10 +198,8 @@ int __cvdso_clock_getres(clockid_t clock, struct __kernel_timespec *res) goto fallback; } - if (res) { - res->tv_sec = 0; - res->tv_nsec = ns; - } + res->tv_sec = 0; + res->tv_nsec = ns; return 0; @@ -221,9 +213,6 @@ __cvdso_clock_getres_time32(clockid_t clock, struct old_timespec32 *res) struct __kernel_timespec ts; int ret; - if (res == NULL) - goto fallback; - ret = __cvdso_clock_getres(clock, &ts); if (ret == 0) { @@ -232,8 +221,5 @@ __cvdso_clock_getres_time32(clockid_t clock, struct old_timespec32 *res) } return ret; - -fallback: - return clock_getres_fallback(clock, (struct __kernel_timespec *)res); } #endif /* VDSO_HAS_CLOCK_GETRES */ -- cgit From 502a590a170b3b3d0ad998ee0b639ac0b3db1dfa Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 28 Jul 2019 15:12:53 +0200 Subject: lib/vdso: Move fallback invocation to the callers To allow syscall fallbacks using the legacy 32bit syscall for 32bit VDSO builds, move the fallback invocation out into the callers. Split the common code out of __cvdso_clock_gettime/getres() and invoke the syscall fallback in the 64bit and 32bit variants. Preparatory work for using legacy syscalls in 32bit VDSO. No functional change. Fixes: 00b26474c2f1 ("lib/vdso: Provide generic VDSO implementation") Signed-off-by: Thomas Gleixner Tested-by: Vincenzo Frascino Reviewed-by: Andy Lutomirski Reviewed-by: Vincenzo Frascino Link: https://lkml.kernel.org/r/20190728131648.695579736@linutronix.de --- lib/vdso/gettimeofday.c | 53 +++++++++++++++++++++++++++++++++---------------- 1 file changed, 36 insertions(+), 17 deletions(-) diff --git a/lib/vdso/gettimeofday.c b/lib/vdso/gettimeofday.c index e28f5a607a5f..a9e7fd029593 100644 --- a/lib/vdso/gettimeofday.c +++ b/lib/vdso/gettimeofday.c @@ -51,7 +51,7 @@ static int do_hres(const struct vdso_data *vd, clockid_t clk, ns = vdso_ts->nsec; last = vd->cycle_last; if (unlikely((s64)cycles < 0)) - return clock_gettime_fallback(clk, ts); + return -1; ns += vdso_calc_delta(cycles, last, vd->mask, vd->mult); ns >>= vd->shift; @@ -82,14 +82,14 @@ static void do_coarse(const struct vdso_data *vd, clockid_t clk, } static __maybe_unused int -__cvdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts) +__cvdso_clock_gettime_common(clockid_t clock, struct __kernel_timespec *ts) { const struct vdso_data *vd = __arch_get_vdso_data(); u32 msk; /* Check for negative values or invalid clocks */ if (unlikely((u32) clock >= MAX_CLOCKS)) - goto fallback; + return -1; /* * Convert the clockid to a bitmask and use it to check which @@ -104,9 +104,17 @@ __cvdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts) } else if (msk & VDSO_RAW) { return do_hres(&vd[CS_RAW], clock, ts); } + return -1; +} -fallback: - return clock_gettime_fallback(clock, ts); +static __maybe_unused int +__cvdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts) +{ + int ret = __cvdso_clock_gettime_common(clock, ts); + + if (unlikely(ret)) + return clock_gettime_fallback(clock, ts); + return 0; } static __maybe_unused int @@ -115,9 +123,12 @@ __cvdso_clock_gettime32(clockid_t clock, struct old_timespec32 *res) struct __kernel_timespec ts; int ret; - ret = __cvdso_clock_gettime(clock, &ts); + ret = __cvdso_clock_gettime_common(clock, &ts); - if (ret == 0) { + if (unlikely(ret)) + ret = clock_gettime_fallback(clock, &ts); + + if (likely(!ret)) { res->tv_sec = ts.tv_sec; res->tv_nsec = ts.tv_nsec; } @@ -163,17 +174,18 @@ static __maybe_unused time_t __cvdso_time(time_t *time) #ifdef VDSO_HAS_CLOCK_GETRES static __maybe_unused -int __cvdso_clock_getres(clockid_t clock, struct __kernel_timespec *res) +int __cvdso_clock_getres_common(clockid_t clock, struct __kernel_timespec *res) { const struct vdso_data *vd = __arch_get_vdso_data(); - u64 ns; + u64 hrtimer_res; u32 msk; - u64 hrtimer_res = READ_ONCE(vd[CS_HRES_COARSE].hrtimer_res); + u64 ns; /* Check for negative values or invalid clocks */ if (unlikely((u32) clock >= MAX_CLOCKS)) - goto fallback; + return -1; + hrtimer_res = READ_ONCE(vd[CS_HRES_COARSE].hrtimer_res); /* * Convert the clockid to a bitmask and use it to check which * clocks are handled in the VDSO directly. @@ -195,16 +207,22 @@ int __cvdso_clock_getres(clockid_t clock, struct __kernel_timespec *res) */ ns = hrtimer_res; } else { - goto fallback; + return -1; } res->tv_sec = 0; res->tv_nsec = ns; return 0; +} + +int __cvdso_clock_getres(clockid_t clock, struct __kernel_timespec *res) +{ + int ret = __cvdso_clock_getres_common(clock, res); -fallback: - return clock_getres_fallback(clock, res); + if (unlikely(ret)) + return clock_getres_fallback(clock, res); + return 0; } static __maybe_unused int @@ -213,13 +231,14 @@ __cvdso_clock_getres_time32(clockid_t clock, struct old_timespec32 *res) struct __kernel_timespec ts; int ret; - ret = __cvdso_clock_getres(clock, &ts); + ret = __cvdso_clock_getres_common(clock, &ts); + if (unlikely(ret)) + ret = clock_getres_fallback(clock, &ts); - if (ret == 0) { + if (likely(!ret)) { res->tv_sec = ts.tv_sec; res->tv_nsec = ts.tv_nsec; } - return ret; } #endif /* VDSO_HAS_CLOCK_GETRES */ -- cgit From c60a32ea4f459f99b98d383cad3b1ac7cfb3f4be Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 30 Jul 2019 11:38:50 +0200 Subject: lib/vdso/32: Provide legacy syscall fallbacks To address the regression which causes seccomp to deny applications the access to clock_gettime64() and clock_getres64() syscalls because they are not enabled in the existing filters. That trips over the fact that 32bit VDSOs use the new clock_gettime64() and clock_getres64() syscalls in the fallback path. Add a conditional to invoke the 32bit legacy fallback syscalls instead of the new 64bit variants. The conditional can go away once all architectures are converted. Fixes: 00b26474c2f1 ("lib/vdso: Provide generic VDSO implementation") Signed-off-by: Thomas Gleixner Tested-by: Sean Christopherson Reviewed-by: Sean Christopherson Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907301134470.1738@nanos.tec.linutronix.de --- lib/vdso/gettimeofday.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/lib/vdso/gettimeofday.c b/lib/vdso/gettimeofday.c index a9e7fd029593..e630e7ff57f1 100644 --- a/lib/vdso/gettimeofday.c +++ b/lib/vdso/gettimeofday.c @@ -125,14 +125,18 @@ __cvdso_clock_gettime32(clockid_t clock, struct old_timespec32 *res) ret = __cvdso_clock_gettime_common(clock, &ts); +#ifdef VDSO_HAS_32BIT_FALLBACK + if (unlikely(ret)) + return clock_gettime32_fallback(clock, res); +#else if (unlikely(ret)) ret = clock_gettime_fallback(clock, &ts); +#endif if (likely(!ret)) { res->tv_sec = ts.tv_sec; res->tv_nsec = ts.tv_nsec; } - return ret; } @@ -232,8 +236,14 @@ __cvdso_clock_getres_time32(clockid_t clock, struct old_timespec32 *res) int ret; ret = __cvdso_clock_getres_common(clock, &ts); + +#ifdef VDSO_HAS_32BIT_FALLBACK + if (unlikely(ret)) + return clock_getres32_fallback(clock, res); +#else if (unlikely(ret)) ret = clock_getres_fallback(clock, &ts); +#endif if (likely(!ret)) { res->tv_sec = ts.tv_sec; -- cgit From d2f5d3fa26196183adb44a413c44caa9872275b4 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 28 Jul 2019 15:12:55 +0200 Subject: x86/vdso/32: Use 32bit syscall fallback The generic VDSO implementation uses the Y2038 safe clock_gettime64() and clock_getres_time64() syscalls as fallback for 32bit VDSO. This breaks seccomp setups because these syscalls might be not (yet) allowed. Implement the 32bit variants which use the legacy syscalls and select the variant in the core library. The 64bit time variants are not removed because they are required for the time64 based vdso accessors. Fixes: 7ac870747988 ("x86/vdso: Switch to generic vDSO implementation") Reported-by: Sean Christopherson Reported-by: Paul Bolle Suggested-by: Andy Lutomirski Signed-off-by: Thomas Gleixner Reviewed-by: Vincenzo Frascino Reviewed-by: Andy Lutomirski Link: https://lkml.kernel.org/r/20190728131648.879156507@linutronix.de --- arch/x86/include/asm/vdso/gettimeofday.h | 36 ++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/x86/include/asm/vdso/gettimeofday.h b/arch/x86/include/asm/vdso/gettimeofday.h index ae91429129a6..ba71a63cdac4 100644 --- a/arch/x86/include/asm/vdso/gettimeofday.h +++ b/arch/x86/include/asm/vdso/gettimeofday.h @@ -96,6 +96,8 @@ long clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) #else +#define VDSO_HAS_32BIT_FALLBACK 1 + static __always_inline long clock_gettime_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) { @@ -113,6 +115,23 @@ long clock_gettime_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) return ret; } +static __always_inline +long clock_gettime32_fallback(clockid_t _clkid, struct old_timespec32 *_ts) +{ + long ret; + + asm ( + "mov %%ebx, %%edx \n" + "mov %[clock], %%ebx \n" + "call __kernel_vsyscall \n" + "mov %%edx, %%ebx \n" + : "=a" (ret), "=m" (*_ts) + : "0" (__NR_clock_gettime), [clock] "g" (_clkid), "c" (_ts) + : "edx"); + + return ret; +} + static __always_inline long gettimeofday_fallback(struct __kernel_old_timeval *_tv, struct timezone *_tz) @@ -148,6 +167,23 @@ clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) return ret; } +static __always_inline +long clock_getres32_fallback(clockid_t _clkid, struct old_timespec32 *_ts) +{ + long ret; + + asm ( + "mov %%ebx, %%edx \n" + "mov %[clock], %%ebx \n" + "call __kernel_vsyscall \n" + "mov %%edx, %%ebx \n" + : "=a" (ret), "=m" (*_ts) + : "0" (__NR_clock_getres), [clock] "g" (_clkid), "c" (_ts) + : "edx"); + + return ret; +} + #endif #ifdef CONFIG_PARAVIRT_CLOCK -- cgit From 33a58980ff3cc5dbf0bb1b325746ac69223eda0b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 28 Jul 2019 15:12:56 +0200 Subject: arm64: compat: vdso: Use legacy syscalls as fallback The generic VDSO implementation uses the Y2038 safe clock_gettime64() and clock_getres_time64() syscalls as fallback for 32bit VDSO. This breaks seccomp setups because these syscalls might be not (yet) allowed. Implement the 32bit variants which use the legacy syscalls and select the variant in the core library. The 64bit time variants are not removed because they are required for the time64 based vdso accessors. Fixes: 00b26474c2f1 ("lib/vdso: Provide generic VDSO implementation") Reported-by: Sean Christopherson Reported-by: Paul Bolle Suggested-by: Andy Lutomirski Signed-off-by: Thomas Gleixner Tested-by: Vincenzo Frascino Reviewed-by: Vincenzo Frascino Link: https://lkml.kernel.org/r/20190728131648.971361611@linutronix.de --- arch/arm64/include/asm/vdso/compat_gettimeofday.h | 40 +++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/arch/arm64/include/asm/vdso/compat_gettimeofday.h b/arch/arm64/include/asm/vdso/compat_gettimeofday.h index f4812777f5c5..c50ee1b7d5cd 100644 --- a/arch/arm64/include/asm/vdso/compat_gettimeofday.h +++ b/arch/arm64/include/asm/vdso/compat_gettimeofday.h @@ -16,6 +16,8 @@ #define VDSO_HAS_CLOCK_GETRES 1 +#define VDSO_HAS_32BIT_FALLBACK 1 + static __always_inline int gettimeofday_fallback(struct __kernel_old_timeval *_tv, struct timezone *_tz) @@ -51,6 +53,23 @@ long clock_gettime_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) return ret; } +static __always_inline +long clock_gettime32_fallback(clockid_t _clkid, struct old_timespec32 *_ts) +{ + register struct old_timespec32 *ts asm("r1") = _ts; + register clockid_t clkid asm("r0") = _clkid; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_compat_clock_gettime; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (clkid), "r" (ts), "r" (nr) + : "memory"); + + return ret; +} + static __always_inline int clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) { @@ -72,6 +91,27 @@ int clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) return ret; } +static __always_inline +int clock_getres32_fallback(clockid_t _clkid, struct old_timespec32 *_ts) +{ + register struct old_timespec32 *ts asm("r1") = _ts; + register clockid_t clkid asm("r0") = _clkid; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_compat_clock_getres; + + /* The checks below are required for ABI consistency with arm */ + if ((_clkid >= MAX_CLOCKS) && (_ts == NULL)) + return -EINVAL; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (clkid), "r" (ts), "r" (nr) + : "memory"); + + return ret; +} + static __always_inline u64 __arch_get_hw_counter(s32 clock_mode) { u64 res; -- cgit From 5348deb138abb90ca8f728356772e38abc791cf9 Mon Sep 17 00:00:00 2001 From: Pankaj Gupta Date: Tue, 30 Jul 2019 17:07:08 +0530 Subject: dm table: fix dax_dev NULL dereference in device_synchronous() If a device doesn't support DAX its 'dax_dev' is NULL. Fix device_synchronous() to first check if dax_dev is NULL before dereferencing it. Fixes: 2e9ee0955d3c ("dm: enable synchronous dax") Reported-by: jencce.kernel@gmail.com Signed-off-by: Pankaj Gupta Acked-by: Dan Williams Signed-off-by: Mike Snitzer --- drivers/md/dm-table.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index caaee8032afe..12857beaa7f9 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -894,7 +894,7 @@ int device_supports_dax(struct dm_target *ti, struct dm_dev *dev, static int device_synchronous(struct dm_target *ti, struct dm_dev *dev, sector_t start, sector_t len, void *data) { - return dax_synchronous(dev->dax_dev); + return dev->dax_dev && dax_synchronous(dev->dax_dev); } bool dm_table_supports_dax(struct dm_table *t, -- cgit From 9c50a98f55f4b123227eebb25009524d20bc4c2a Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Tue, 30 Jul 2019 14:39:43 -0400 Subject: dm table: fix various whitespace issues with recent DAX code Also, rename device_synchronous to device_dax_synchronous. Signed-off-by: Mike Snitzer --- drivers/md/dm-table.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 12857beaa7f9..7b6c3ee9e755 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -882,23 +882,23 @@ EXPORT_SYMBOL_GPL(dm_table_set_type); /* validate the dax capability of the target device span */ int device_supports_dax(struct dm_target *ti, struct dm_dev *dev, - sector_t start, sector_t len, void *data) + sector_t start, sector_t len, void *data) { int blocksize = *(int *) data; return generic_fsdax_supported(dev->dax_dev, dev->bdev, blocksize, - start, len); + start, len); } /* Check devices support synchronous DAX */ -static int device_synchronous(struct dm_target *ti, struct dm_dev *dev, - sector_t start, sector_t len, void *data) +static int device_dax_synchronous(struct dm_target *ti, struct dm_dev *dev, + sector_t start, sector_t len, void *data) { return dev->dax_dev && dax_synchronous(dev->dax_dev); } bool dm_table_supports_dax(struct dm_table *t, - iterate_devices_callout_fn iterate_fn, int *blocksize) + iterate_devices_callout_fn iterate_fn, int *blocksize) { struct dm_target *ti; unsigned i; @@ -911,7 +911,7 @@ bool dm_table_supports_dax(struct dm_table *t, return false; if (!ti->type->iterate_devices || - !ti->type->iterate_devices(ti, iterate_fn, blocksize)) + !ti->type->iterate_devices(ti, iterate_fn, blocksize)) return false; } @@ -1921,7 +1921,7 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q, if (dm_table_supports_dax(t, device_supports_dax, &page_size)) { blk_queue_flag_set(QUEUE_FLAG_DAX, q); - if (dm_table_supports_dax(t, device_synchronous, NULL)) + if (dm_table_supports_dax(t, device_dax_synchronous, NULL)) set_dax_synchronous(t->md->dax_dev); } else -- cgit From b1d45c23284e55a379f85554a27a548b7988d47a Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 20 Jul 2019 19:39:43 +0900 Subject: tracing: Fix header include guards in trace event headers These include guards are broken. Match the #if !define() and #define lines so that they work correctly. Link: http://lkml.kernel.org/r/20190720103943.16982-1-yamada.masahiro@socionext.com Fixes: f54d1867005c3 ("dma-buf: Rename struct fence to dma_fence") Fixes: 2e26ca7150a4f ("tracing: Fix tracepoint.h DECLARE_TRACE() to allow more than one header") Fixes: e543002f77f46 ("qdisc: add tracepoint qdisc:qdisc_dequeue for dequeued SKBs") Fixes: 95f295f9fe081 ("dmaengine: tegra: add tracepoints to driver") Signed-off-by: Masahiro Yamada Signed-off-by: Steven Rostedt (VMware) --- include/trace/events/dma_fence.h | 2 +- include/trace/events/napi.h | 4 ++-- include/trace/events/qdisc.h | 4 ++-- include/trace/events/tegra_apb_dma.h | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/include/trace/events/dma_fence.h b/include/trace/events/dma_fence.h index 2212adda8f77..64e92d56c6a8 100644 --- a/include/trace/events/dma_fence.h +++ b/include/trace/events/dma_fence.h @@ -2,7 +2,7 @@ #undef TRACE_SYSTEM #define TRACE_SYSTEM dma_fence -#if !defined(_TRACE_FENCE_H) || defined(TRACE_HEADER_MULTI_READ) +#if !defined(_TRACE_DMA_FENCE_H) || defined(TRACE_HEADER_MULTI_READ) #define _TRACE_DMA_FENCE_H #include diff --git a/include/trace/events/napi.h b/include/trace/events/napi.h index f3a12566bed0..6678cf8b235b 100644 --- a/include/trace/events/napi.h +++ b/include/trace/events/napi.h @@ -3,7 +3,7 @@ #define TRACE_SYSTEM napi #if !defined(_TRACE_NAPI_H) || defined(TRACE_HEADER_MULTI_READ) -#define _TRACE_NAPI_H_ +#define _TRACE_NAPI_H #include #include @@ -38,7 +38,7 @@ TRACE_EVENT(napi_poll, #undef NO_DEV -#endif /* _TRACE_NAPI_H_ */ +#endif /* _TRACE_NAPI_H */ /* This part must be outside protection */ #include diff --git a/include/trace/events/qdisc.h b/include/trace/events/qdisc.h index 60d0d8bd336d..0d1a9ebf55ba 100644 --- a/include/trace/events/qdisc.h +++ b/include/trace/events/qdisc.h @@ -2,7 +2,7 @@ #define TRACE_SYSTEM qdisc #if !defined(_TRACE_QDISC_H) || defined(TRACE_HEADER_MULTI_READ) -#define _TRACE_QDISC_H_ +#define _TRACE_QDISC_H #include #include @@ -44,7 +44,7 @@ TRACE_EVENT(qdisc_dequeue, __entry->txq_state, __entry->packets, __entry->skbaddr ) ); -#endif /* _TRACE_QDISC_H_ */ +#endif /* _TRACE_QDISC_H */ /* This part must be outside protection */ #include diff --git a/include/trace/events/tegra_apb_dma.h b/include/trace/events/tegra_apb_dma.h index 0818f6286110..971cd02d2daf 100644 --- a/include/trace/events/tegra_apb_dma.h +++ b/include/trace/events/tegra_apb_dma.h @@ -1,5 +1,5 @@ #if !defined(_TRACE_TEGRA_APB_DMA_H) || defined(TRACE_HEADER_MULTI_READ) -#define _TRACE_TEGRA_APM_DMA_H +#define _TRACE_TEGRA_APB_DMA_H #include #include @@ -55,7 +55,7 @@ TRACE_EVENT(tegra_dma_isr, TP_printk("%s: irq %d\n", __get_str(chan), __entry->irq) ); -#endif /* _TRACE_TEGRADMA_H */ +#endif /* _TRACE_TEGRA_APB_DMA_H */ /* This part must be outside protection */ #include -- cgit From 6c77221df96177da0520847ce91e33f539fb8b2d Mon Sep 17 00:00:00 2001 From: Changbin Du Date: Tue, 30 Jul 2019 22:08:50 +0800 Subject: fgraph: Remove redundant ftrace_graph_notrace_addr() test We already have tested it before. The second one should be removed. With this change, the performance should have little improvement. Link: http://lkml.kernel.org/r/20190730140850.7927-1-changbin.du@gmail.com Cc: stable@vger.kernel.org Fixes: 9cd2992f2d6c ("fgraph: Have set_graph_notrace only affect function_graph tracer") Signed-off-by: Changbin Du Signed-off-by: Steven Rostedt (VMware) --- kernel/trace/trace_functions_graph.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c index 69ebf3c2f1b5..78af97163147 100644 --- a/kernel/trace/trace_functions_graph.c +++ b/kernel/trace/trace_functions_graph.c @@ -137,6 +137,13 @@ int trace_graph_entry(struct ftrace_graph_ent *trace) if (trace_recursion_test(TRACE_GRAPH_NOTRACE_BIT)) return 0; + /* + * Do not trace a function if it's filtered by set_graph_notrace. + * Make the index of ret stack negative to indicate that it should + * ignore further functions. But it needs its own ret stack entry + * to recover the original index in order to continue tracing after + * returning from the function. + */ if (ftrace_graph_notrace_addr(trace->func)) { trace_recursion_set(TRACE_GRAPH_NOTRACE_BIT); /* @@ -155,16 +162,6 @@ int trace_graph_entry(struct ftrace_graph_ent *trace) if (ftrace_graph_ignore_irqs()) return 0; - /* - * Do not trace a function if it's filtered by set_graph_notrace. - * Make the index of ret stack negative to indicate that it should - * ignore further functions. But it needs its own ret stack entry - * to recover the original index in order to continue tracing after - * returning from the function. - */ - if (ftrace_graph_notrace_addr(trace->func)) - return 1; - /* * Stop here if tracing_threshold is set. We only write function return * events to the ring buffer. -- cgit From d65848657c3da5c0d4b685f823d0230f151ab34e Mon Sep 17 00:00:00 2001 From: Kent Russell Date: Tue, 23 Jul 2019 10:18:01 -0400 Subject: drm/amdkfd: Fix byte align on VegaM This was missed during the addition of VegaM support Reviewed-by: Alex Deucher Signed-off-by: Kent Russell Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c index 1d3ee9c42f7e..6a5c96e519b1 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gpuvm.c @@ -1140,7 +1140,8 @@ int amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu( adev->asic_type != CHIP_FIJI && adev->asic_type != CHIP_POLARIS10 && adev->asic_type != CHIP_POLARIS11 && - adev->asic_type != CHIP_POLARIS12) ? + adev->asic_type != CHIP_POLARIS12 && + adev->asic_type != CHIP_VEGAM) ? VI_BO_SIZE_ALIGN : 1; mapping_flags = AMDGPU_VM_PAGE_READABLE; -- cgit From 2c0f07fe3ca57c8fb4ee179c9fb50d6eba75349e Mon Sep 17 00:00:00 2001 From: Kevin Wang Date: Mon, 3 Jun 2019 15:58:31 +0800 Subject: drm/amd/powerplay: add callback function of get_thermal_temperature_range 1. the thermal temperature is asic related data, move the code logic to xxx_ppt.c. 2. replace data structure PP_TemperatureRange with smu_temperature_range. 3. change temperature uint from temp*1000 to temp (temperature uint). Signed-off-by: Kevin Wang Signed-off-by: Kenneth Feng Acked-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h | 1 - drivers/gpu/drm/amd/powerplay/navi10_ppt.c | 17 +++++++++++++ drivers/gpu/drm/amd/powerplay/smu_v11_0.c | 18 +++++++++----- drivers/gpu/drm/amd/powerplay/vega20_ppt.c | 34 +++++++++----------------- 4 files changed, 40 insertions(+), 30 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h b/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h index 22e46a289a16..208e6711d506 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h +++ b/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h @@ -429,7 +429,6 @@ struct smu_table_context struct smu_table *tables; uint32_t table_count; struct smu_table memory_pool; - uint16_t software_shutdown_temp; uint8_t thermal_controller_type; uint16_t TDPODLimit; diff --git a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c index 4aaad255a288..3f68268a8733 100644 --- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c +++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c @@ -1620,6 +1620,22 @@ static int navi10_set_performance_level(struct smu_context *smu, enum amd_dpm_fo return ret; } +static int navi10_get_thermal_temperature_range(struct smu_context *smu, + struct smu_temperature_range *range) +{ + struct smu_table_context *table_context = &smu->smu_table; + struct smu_11_0_powerplay_table *powerplay_table = table_context->power_play_table; + + if (!range || !powerplay_table) + return -EINVAL; + + /* The unit is temperature */ + range->min = 0; + range->max = powerplay_table->software_shutdown_temp; + + return 0; +} + static const struct pptable_funcs navi10_ppt_funcs = { .tables_init = navi10_tables_init, .alloc_dpm_context = navi10_allocate_dpm_context, @@ -1657,6 +1673,7 @@ static const struct pptable_funcs navi10_ppt_funcs = { .get_ppfeature_status = navi10_get_ppfeature_status, .set_ppfeature_status = navi10_set_ppfeature_status, .set_performance_level = navi10_set_performance_level, + .get_thermal_temperature_range = navi10_get_thermal_temperature_range, }; void navi10_set_ppt_funcs(struct smu_context *smu) diff --git a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c index caca9091bfcc..1ecb409e3bed 100644 --- a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c +++ b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c @@ -1124,10 +1124,8 @@ static int smu_v11_0_set_thermal_range(struct smu_context *smu, struct smu_temperature_range *range) { struct amdgpu_device *adev = smu->adev; - int low = SMU_THERMAL_MINIMUM_ALERT_TEMP * - SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; - int high = SMU_THERMAL_MAXIMUM_ALERT_TEMP * - SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; + int low = SMU_THERMAL_MINIMUM_ALERT_TEMP; + int high = SMU_THERMAL_MAXIMUM_ALERT_TEMP; uint32_t val; if (!range) @@ -1138,6 +1136,9 @@ static int smu_v11_0_set_thermal_range(struct smu_context *smu, if (high > range->max) high = range->max; + low = max(SMU_THERMAL_MINIMUM_ALERT_TEMP, range->min); + high = min(SMU_THERMAL_MAXIMUM_ALERT_TEMP, range->max); + if (low > high) return -EINVAL; @@ -1146,8 +1147,8 @@ static int smu_v11_0_set_thermal_range(struct smu_context *smu, val = REG_SET_FIELD(val, THM_THERMAL_INT_CTRL, THERM_IH_HW_ENA, 1); val = REG_SET_FIELD(val, THM_THERMAL_INT_CTRL, THERM_INTH_MASK, 0); val = REG_SET_FIELD(val, THM_THERMAL_INT_CTRL, THERM_INTL_MASK, 0); - val = REG_SET_FIELD(val, THM_THERMAL_INT_CTRL, DIG_THERM_INTH, (high / SMU_TEMPERATURE_UNITS_PER_CENTIGRADES)); - val = REG_SET_FIELD(val, THM_THERMAL_INT_CTRL, DIG_THERM_INTL, (low / SMU_TEMPERATURE_UNITS_PER_CENTIGRADES)); + val = REG_SET_FIELD(val, THM_THERMAL_INT_CTRL, DIG_THERM_INTH, (high & 0xff)); + val = REG_SET_FIELD(val, THM_THERMAL_INT_CTRL, DIG_THERM_INTL, (low & 0xff)); val = val & (~THM_THERMAL_INT_CTRL__THERM_TRIGGER_MASK_MASK); WREG32_SOC15(THM, 0, mmTHM_THERMAL_INT_CTRL, val); @@ -1186,7 +1187,10 @@ static int smu_v11_0_start_thermal_control(struct smu_context *smu) if (!smu->pm_enabled) return ret; + ret = smu_get_thermal_temperature_range(smu, &range); + if (ret) + return ret; if (smu->smu_table.thermal_controller_type) { ret = smu_v11_0_set_thermal_range(smu, &range); @@ -1211,6 +1215,8 @@ static int smu_v11_0_start_thermal_control(struct smu_context *smu) adev->pm.dpm.thermal.min_mem_temp = range.mem_min; adev->pm.dpm.thermal.max_mem_crit_temp = range.mem_crit_max; adev->pm.dpm.thermal.max_mem_emergency_temp = range.mem_emergency_max; + adev->pm.dpm.thermal.min_temp = range.min * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; + adev->pm.dpm.thermal.max_temp = range.max * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; return ret; } diff --git a/drivers/gpu/drm/amd/powerplay/vega20_ppt.c b/drivers/gpu/drm/amd/powerplay/vega20_ppt.c index dc139a6feeb1..dd6fd1c8bf24 100644 --- a/drivers/gpu/drm/amd/powerplay/vega20_ppt.c +++ b/drivers/gpu/drm/amd/powerplay/vega20_ppt.c @@ -450,7 +450,6 @@ static int vega20_store_powerplay_table(struct smu_context *smu) memcpy(table_context->driver_pptable, &powerplay_table->smcPPTable, sizeof(PPTable_t)); - table_context->software_shutdown_temp = powerplay_table->usSoftwareShutdownTemp; table_context->thermal_controller_type = powerplay_table->ucThermalControllerType; table_context->TDPODLimit = le32_to_cpu(powerplay_table->OverDrive8Table.ODSettingsMax[ATOM_VEGA20_ODSETTING_POWERPERCENTAGE]); @@ -3234,35 +3233,24 @@ static int vega20_set_watermarks_table(struct smu_context *smu, return 0; } -static const struct smu_temperature_range vega20_thermal_policy[] = -{ - {-273150, 99000, 99000, -273150, 99000, 99000, -273150, 99000, 99000}, - { 120000, 120000, 120000, 120000, 120000, 120000, 120000, 120000, 120000}, -}; - static int vega20_get_thermal_temperature_range(struct smu_context *smu, struct smu_temperature_range *range) { - + struct smu_table_context *table_context = &smu->smu_table; + ATOM_Vega20_POWERPLAYTABLE *powerplay_table = table_context->power_play_table; PPTable_t *pptable = smu->smu_table.driver_pptable; - if (!range) + if (!range || !powerplay_table) return -EINVAL; - memcpy(range, &vega20_thermal_policy[0], sizeof(struct smu_temperature_range)); - - range->max = pptable->TedgeLimit * - SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; - range->edge_emergency_max = (pptable->TedgeLimit + CTF_OFFSET_EDGE) * - SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; - range->hotspot_crit_max = pptable->ThotspotLimit * - SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; - range->hotspot_emergency_max = (pptable->ThotspotLimit + CTF_OFFSET_HOTSPOT) * - SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; - range->mem_crit_max = pptable->ThbmLimit * - SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; - range->mem_emergency_max = (pptable->ThbmLimit + CTF_OFFSET_HBM)* - SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; + /* The unit is temperature */ + range->min = 0; + range->max = powerplay_table->usSoftwareShutdownTemp; + range->edge_emergency_max = (pptable->TedgeLimit + CTF_OFFSET_EDGE); + range->hotspot_crit_max = pptable->ThotspotLimit; + range->hotspot_emergency_max = (pptable->ThotspotLimit + CTF_OFFSET_HOTSPOT); + range->mem_crit_max = pptable->ThbmLimit; + range->mem_emergency_max = (pptable->ThbmLimit + CTF_OFFSET_HBM); return 0; -- cgit From 45a660143bf90a35ab64df663b88d82c02a17091 Mon Sep 17 00:00:00 2001 From: Kevin Wang Date: Tue, 23 Jul 2019 19:56:52 +0800 Subject: drm/amd/powerplay: fix temperature granularity error in smu11 in this patch, drm/amd/powerplay: add callback function of get_thermal_temperature_range the driver missed temperature granularity change on other temperature. Signed-off-by: Kevin Wang Reviewed-by: Evan Quan Reviewed-by: Kenneth Feng Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/smu_v11_0.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c index 1ecb409e3bed..ac5b26228e75 100644 --- a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c +++ b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c @@ -1206,15 +1206,15 @@ static int smu_v11_0_start_thermal_control(struct smu_context *smu) return ret; } - adev->pm.dpm.thermal.min_temp = range.min; - adev->pm.dpm.thermal.max_temp = range.max; - adev->pm.dpm.thermal.max_edge_emergency_temp = range.edge_emergency_max; - adev->pm.dpm.thermal.min_hotspot_temp = range.hotspot_min; - adev->pm.dpm.thermal.max_hotspot_crit_temp = range.hotspot_crit_max; - adev->pm.dpm.thermal.max_hotspot_emergency_temp = range.hotspot_emergency_max; - adev->pm.dpm.thermal.min_mem_temp = range.mem_min; - adev->pm.dpm.thermal.max_mem_crit_temp = range.mem_crit_max; - adev->pm.dpm.thermal.max_mem_emergency_temp = range.mem_emergency_max; + adev->pm.dpm.thermal.min_temp = range.min * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; + adev->pm.dpm.thermal.max_temp = range.max * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; + adev->pm.dpm.thermal.max_edge_emergency_temp = range.edge_emergency_max * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; + adev->pm.dpm.thermal.min_hotspot_temp = range.hotspot_min * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; + adev->pm.dpm.thermal.max_hotspot_crit_temp = range.hotspot_crit_max * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; + adev->pm.dpm.thermal.max_hotspot_emergency_temp = range.hotspot_emergency_max * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; + adev->pm.dpm.thermal.min_mem_temp = range.mem_min * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; + adev->pm.dpm.thermal.max_mem_crit_temp = range.mem_crit_max * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; + adev->pm.dpm.thermal.max_mem_emergency_temp = range.mem_emergency_max * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; adev->pm.dpm.thermal.min_temp = range.min * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; adev->pm.dpm.thermal.max_temp = range.max * SMU_TEMPERATURE_UNITS_PER_CENTIGRADES; -- cgit From 090efd946d00cd23ce4ac25bce125f408b704d7d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 25 Jul 2019 22:28:58 -0500 Subject: drm/amdgpu/powerplay: use proper revision id for navi The PCI revision id determines the sku. Reviewed-by: Feifei Xu Reviewed-by: Kevin Wang Reviewed-by: Evan Quan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/navi10_ppt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c index 3f68268a8733..be592d22bdcc 100644 --- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c +++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c @@ -23,6 +23,7 @@ #include "pp_debug.h" #include +#include #include "amdgpu.h" #include "amdgpu_smu.h" #include "atomfirmware.h" @@ -1573,7 +1574,7 @@ static int navi10_set_peak_clock_by_device(struct smu_context *smu) uint32_t sclk_freq = 0, uclk_freq = 0; uint32_t uclk_level = 0; - switch (adev->rev_id) { + switch (adev->pdev->revision) { case 0xf0: /* XTX */ case 0xc0: sclk_freq = NAVI10_PEAK_SCLK_XTX; -- cgit From 479156f2e5540077377a823eaf5a4263bd329063 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Thu, 25 Jul 2019 12:10:34 +0800 Subject: drm/amd/powerplay: fix null pointer dereference around dpm state relates DPM state relates are not supported on the new SW SMU ASICs. But still it's not OK to trigger null pointer dereference on accessing them. Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 18 +++++++++++++----- drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 3 ++- 2 files changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c index 03ca8c69114f..8c90baca07b2 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c @@ -159,12 +159,16 @@ static ssize_t amdgpu_get_dpm_state(struct device *dev, struct amdgpu_device *adev = ddev->dev_private; enum amd_pm_state_type pm; - if (is_support_sw_smu(adev) && adev->smu.ppt_funcs->get_current_power_state) - pm = amdgpu_smu_get_current_power_state(adev); - else if (adev->powerplay.pp_funcs->get_current_power_state) + if (is_support_sw_smu(adev)) { + if (adev->smu.ppt_funcs->get_current_power_state) + pm = amdgpu_smu_get_current_power_state(adev); + else + pm = adev->pm.dpm.user_state; + } else if (adev->powerplay.pp_funcs->get_current_power_state) { pm = amdgpu_dpm_get_current_power_state(adev); - else + } else { pm = adev->pm.dpm.user_state; + } return snprintf(buf, PAGE_SIZE, "%s\n", (pm == POWER_STATE_TYPE_BATTERY) ? "battery" : @@ -191,7 +195,11 @@ static ssize_t amdgpu_set_dpm_state(struct device *dev, goto fail; } - if (adev->powerplay.pp_funcs->dispatch_tasks) { + if (is_support_sw_smu(adev)) { + mutex_lock(&adev->pm.mutex); + adev->pm.dpm.user_state = state; + mutex_unlock(&adev->pm.mutex); + } else if (adev->powerplay.pp_funcs->dispatch_tasks) { amdgpu_dpm_dispatch_task(adev, AMD_PP_TASK_ENABLE_USER_STATE, &state); } else { mutex_lock(&adev->pm.mutex); diff --git a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c index c097113c3976..88ed85e3d233 100644 --- a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c @@ -306,7 +306,8 @@ int smu_get_power_num_states(struct smu_context *smu, /* not support power state */ memset(state_info, 0, sizeof(struct pp_states_info)); - state_info->nums = 0; + state_info->nums = 1; + state_info->states[0] = POWER_STATE_TYPE_DEFAULT; return 0; } -- cgit From f0bc1ee473fefd4d9f2ace9fad1cefdc0b7f6fdd Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Thu, 25 Jul 2019 10:12:42 +0800 Subject: drm/amd/powerplay: enable SW SMU reset functionality Move SMU irq handler register to sw_init as that's totally software related. Otherwise, it will prevent SMU reset working. Signed-off-by: Evan Quan Reviewed-by: Kenneth Feng Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c index 88ed85e3d233..93cd969e5cf5 100644 --- a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c @@ -724,6 +724,12 @@ static int smu_sw_init(void *handle) return ret; } + ret = smu_register_irq_handler(smu); + if (ret) { + pr_err("Failed to register smc irq handler!\n"); + return ret; + } + return 0; } @@ -733,6 +739,9 @@ static int smu_sw_fini(void *handle) struct smu_context *smu = &adev->smu; int ret; + kfree(smu->irq_source); + smu->irq_source = NULL; + ret = smu_smc_table_sw_fini(smu); if (ret) { pr_err("Failed to sw fini smc table!\n"); @@ -1089,10 +1098,6 @@ static int smu_hw_init(void *handle) if (ret) goto failed; - ret = smu_register_irq_handler(smu); - if (ret) - goto failed; - if (!smu->pm_enabled) adev->pm.dpm_enabled = false; else @@ -1122,9 +1127,6 @@ static int smu_hw_fini(void *handle) kfree(table_context->overdrive_table); table_context->overdrive_table = NULL; - kfree(smu->irq_source); - smu->irq_source = NULL; - ret = smu_fini_fb_allocations(smu); if (ret) return ret; -- cgit From 8d1502f629c9966743de45744f4c1ba93a57d105 Mon Sep 17 00:00:00 2001 From: Souptick Joarder Date: Wed, 31 Jul 2019 00:04:56 +0530 Subject: xen/gntdev.c: Replace vm_map_pages() with vm_map_pages_zero() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 'commit df9bde015a72 ("xen/gntdev.c: convert to use vm_map_pages()")' breaks gntdev driver. If vma->vm_pgoff > 0, vm_map_pages() will: - use map->pages starting at vma->vm_pgoff instead of 0 - verify map->count against vma_pages()+vma->vm_pgoff instead of just vma_pages(). In practice, this breaks using a single gntdev FD for mapping multiple grants. relevant strace output: [pid 857] ioctl(7, IOCTL_GNTDEV_MAP_GRANT_REF, 0x7ffd3407b6d0) = 0 [pid 857] mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, 7, 0) = 0x777f1211b000 [pid 857] ioctl(7, IOCTL_GNTDEV_SET_UNMAP_NOTIFY, 0x7ffd3407b710) = 0 [pid 857] ioctl(7, IOCTL_GNTDEV_MAP_GRANT_REF, 0x7ffd3407b6d0) = 0 [pid 857] mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, 7, 0x1000) = -1 ENXIO (No such device or address) details here: https://github.com/QubesOS/qubes-issues/issues/5199 The reason is -> ( copying Marek's word from discussion) vma->vm_pgoff is used as index passed to gntdev_find_map_index. It's basically using this parameter for "which grant reference to map". map struct returned by gntdev_find_map_index() describes just the pages to be mapped. Specifically map->pages[0] should be mapped at vma->vm_start, not vma->vm_start+vma->vm_pgoff*PAGE_SIZE. When trying to map grant with index (aka vma->vm_pgoff) > 1, __vm_map_pages() will refuse to map it because it will expect map->count to be at least vma_pages(vma)+vma->vm_pgoff, while it is exactly vma_pages(vma). Converting vm_map_pages() to use vm_map_pages_zero() will fix the problem. Marek has tested and confirmed the same. Cc: stable@vger.kernel.org # v5.2+ Fixes: df9bde015a72 ("xen/gntdev.c: convert to use vm_map_pages()") Reported-by: Marek Marczykowski-Górecki Signed-off-by: Souptick Joarder Tested-by: Marek Marczykowski-Górecki Reviewed-by: Boris Ostrovsky Signed-off-by: Juergen Gross --- drivers/xen/gntdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 4c339c7e66e5..a446a7221e13 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -1143,7 +1143,7 @@ static int gntdev_mmap(struct file *flip, struct vm_area_struct *vma) goto out_put_map; if (!use_ptemod) { - err = vm_map_pages(vma, map->pages, map->count); + err = vm_map_pages_zero(vma, map->pages, map->count); if (err) goto out_put_map; } else { -- cgit From a78d14a31666c636a9e00a589032119fb59e3b94 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 22 Jul 2019 09:46:29 +0200 Subject: xen: avoid link error on ARM Building the privcmd code as a loadable module on ARM, we get a link error due to the private cache management functions: ERROR: "__sync_icache_dcache" [drivers/xen/xen-privcmd.ko] undefined! Move the code into a new that is always built in when Xen is enabled, as suggested by Juergen Gross and Boris Ostrovsky. Signed-off-by: Arnd Bergmann Reviewed-by: Stefano Stabellini Signed-off-by: Juergen Gross --- drivers/xen/privcmd.c | 35 +++++------------------------------ drivers/xen/xlate_mmu.c | 32 ++++++++++++++++++++++++++++++++ include/xen/xen-ops.h | 3 +++ 3 files changed, 40 insertions(+), 30 deletions(-) diff --git a/drivers/xen/privcmd.c b/drivers/xen/privcmd.c index 2f5ce7230a43..c6070e70dd73 100644 --- a/drivers/xen/privcmd.c +++ b/drivers/xen/privcmd.c @@ -724,25 +724,6 @@ static long privcmd_ioctl_restrict(struct file *file, void __user *udata) return 0; } -struct remap_pfn { - struct mm_struct *mm; - struct page **pages; - pgprot_t prot; - unsigned long i; -}; - -static int remap_pfn_fn(pte_t *ptep, unsigned long addr, void *data) -{ - struct remap_pfn *r = data; - struct page *page = r->pages[r->i]; - pte_t pte = pte_mkspecial(pfn_pte(page_to_pfn(page), r->prot)); - - set_pte_at(r->mm, addr, ptep, pte); - r->i++; - - return 0; -} - static long privcmd_ioctl_mmap_resource(struct file *file, void __user *udata) { struct privcmd_data *data = file->private_data; @@ -774,7 +755,8 @@ static long privcmd_ioctl_mmap_resource(struct file *file, void __user *udata) goto out; } - if (xen_feature(XENFEAT_auto_translated_physmap)) { + if (IS_ENABLED(CONFIG_XEN_AUTO_XLATE) && + xen_feature(XENFEAT_auto_translated_physmap)) { unsigned int nr = DIV_ROUND_UP(kdata.num, XEN_PFN_PER_PAGE); struct page **pages; unsigned int i; @@ -808,16 +790,9 @@ static long privcmd_ioctl_mmap_resource(struct file *file, void __user *udata) if (rc) goto out; - if (xen_feature(XENFEAT_auto_translated_physmap)) { - struct remap_pfn r = { - .mm = vma->vm_mm, - .pages = vma->vm_private_data, - .prot = vma->vm_page_prot, - }; - - rc = apply_to_page_range(r.mm, kdata.addr, - kdata.num << PAGE_SHIFT, - remap_pfn_fn, &r); + if (IS_ENABLED(CONFIG_XEN_AUTO_XLATE) && + xen_feature(XENFEAT_auto_translated_physmap)) { + rc = xen_remap_vma_range(vma, kdata.addr, kdata.num << PAGE_SHIFT); } else { unsigned int domid = (xdata.flags & XENMEM_rsrc_acq_caller_owned) ? diff --git a/drivers/xen/xlate_mmu.c b/drivers/xen/xlate_mmu.c index ba883a80b3c0..7b1077f0abcb 100644 --- a/drivers/xen/xlate_mmu.c +++ b/drivers/xen/xlate_mmu.c @@ -262,3 +262,35 @@ int __init xen_xlate_map_ballooned_pages(xen_pfn_t **gfns, void **virt, return 0; } EXPORT_SYMBOL_GPL(xen_xlate_map_ballooned_pages); + +struct remap_pfn { + struct mm_struct *mm; + struct page **pages; + pgprot_t prot; + unsigned long i; +}; + +static int remap_pfn_fn(pte_t *ptep, unsigned long addr, void *data) +{ + struct remap_pfn *r = data; + struct page *page = r->pages[r->i]; + pte_t pte = pte_mkspecial(pfn_pte(page_to_pfn(page), r->prot)); + + set_pte_at(r->mm, addr, ptep, pte); + r->i++; + + return 0; +} + +/* Used by the privcmd module, but has to be built-in on ARM */ +int xen_remap_vma_range(struct vm_area_struct *vma, unsigned long addr, unsigned long len) +{ + struct remap_pfn r = { + .mm = vma->vm_mm, + .pages = vma->vm_private_data, + .prot = vma->vm_page_prot, + }; + + return apply_to_page_range(vma->vm_mm, addr, len, remap_pfn_fn, &r); +} +EXPORT_SYMBOL_GPL(xen_remap_vma_range); diff --git a/include/xen/xen-ops.h b/include/xen/xen-ops.h index 4969817124a8..98b30c1613b2 100644 --- a/include/xen/xen-ops.h +++ b/include/xen/xen-ops.h @@ -109,6 +109,9 @@ static inline int xen_xlate_unmap_gfn_range(struct vm_area_struct *vma, } #endif +int xen_remap_vma_range(struct vm_area_struct *vma, unsigned long addr, + unsigned long len); + /* * xen_remap_domain_gfn_array() - map an array of foreign frames by gfn * @vma: VMA to map the pages into -- cgit From 67d0859e2758ef992fd32499747ce4b1038a63c0 Mon Sep 17 00:00:00 2001 From: Christian König Date: Tue, 30 Jul 2019 11:17:03 +0200 Subject: drm/amdgpu: fix error handling in amdgpu_cs_process_fence_dep MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We always need to drop the ctx reference and should check for errors first and then dereference the fence pointer. Signed-off-by: Christian König Reviewed-by: Chunming Zhou Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index e069de8b54e6..4e4094f842e7 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -1044,29 +1044,27 @@ static int amdgpu_cs_process_fence_dep(struct amdgpu_cs_parser *p, return r; } - fence = amdgpu_ctx_get_fence(ctx, entity, - deps[i].handle); + fence = amdgpu_ctx_get_fence(ctx, entity, deps[i].handle); + amdgpu_ctx_put(ctx); + + if (IS_ERR(fence)) + return PTR_ERR(fence); + else if (!fence) + continue; if (chunk->chunk_id == AMDGPU_CHUNK_ID_SCHEDULED_DEPENDENCIES) { - struct drm_sched_fence *s_fence = to_drm_sched_fence(fence); + struct drm_sched_fence *s_fence; struct dma_fence *old = fence; + s_fence = to_drm_sched_fence(fence); fence = dma_fence_get(&s_fence->scheduled); dma_fence_put(old); } - if (IS_ERR(fence)) { - r = PTR_ERR(fence); - amdgpu_ctx_put(ctx); + r = amdgpu_sync_fence(p->adev, &p->job->sync, fence, true); + dma_fence_put(fence); + if (r) return r; - } else if (fence) { - r = amdgpu_sync_fence(p->adev, &p->job->sync, fence, - true); - dma_fence_put(fence); - amdgpu_ctx_put(ctx); - if (r) - return r; - } } return 0; } -- cgit From 929e571c04c285861e0bb049a396a2bdaea63282 Mon Sep 17 00:00:00 2001 From: Wang Xiayang Date: Sat, 27 Jul 2019 17:30:30 +0800 Subject: drm/amdgpu: fix a potential information leaking bug MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Coccinelle reports a path that the array "data" is never initialized. The path skips the checks in the conditional branches when either of callback functions, read_wave_vgprs and read_wave_sgprs, is not registered. Later, the uninitialized "data" array is read in the while-loop below and passed to put_user(). Fix the path by allocating the array with kcalloc(). The patch is simplier than adding a fall-back branch that explicitly calls memset(data, 0, ...). Also it does not need the multiplication 1024*sizeof(*data) as the size parameter for memset() though there is no risk of integer overflow. Signed-off-by: Wang Xiayang Reviewed-by: Chunming Zhou Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c index 6d54decef7f8..5652cc72ed3a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c @@ -707,7 +707,7 @@ static ssize_t amdgpu_debugfs_gpr_read(struct file *f, char __user *buf, thread = (*pos & GENMASK_ULL(59, 52)) >> 52; bank = (*pos & GENMASK_ULL(61, 60)) >> 60; - data = kmalloc_array(1024, sizeof(*data), GFP_KERNEL); + data = kcalloc(1024, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; -- cgit From a02709818f397e7ed7a0943d65a49d54b2752626 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Mon, 22 Jul 2019 09:51:59 +0800 Subject: drm/amd/powerplay: add new sensor type for VCN powergate status VCN is widely used in new ASICs and different from tranditional UVD and VCE. Signed-off-by: Evan Quan Reviewed-by: Kenneth Feng Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/include/kgd_pp_interface.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/include/kgd_pp_interface.h b/drivers/gpu/drm/amd/include/kgd_pp_interface.h index 9f661bf96ed0..5b1ebb7f995a 100644 --- a/drivers/gpu/drm/amd/include/kgd_pp_interface.h +++ b/drivers/gpu/drm/amd/include/kgd_pp_interface.h @@ -123,6 +123,7 @@ enum amd_pp_sensors { AMDGPU_PP_SENSOR_ENABLED_SMC_FEATURES_MASK, AMDGPU_PP_SENSOR_MIN_FAN_RPM, AMDGPU_PP_SENSOR_MAX_FAN_RPM, + AMDGPU_PP_SENSOR_VCN_POWER_STATE, }; enum amd_pp_task { -- cgit From 201cd702b7012ecee2a613e09b6a227ca0e12504 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Mon, 22 Jul 2019 09:55:36 +0800 Subject: drm/amd/powerplay: support VCN powergate status retrieval on Raven Enable VCN powergate status report on Raven. Signed-off-by: Evan Quan Reviewed-by: Kenneth Feng Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c index e32ae9d3373c..18e780f566fa 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c @@ -1111,6 +1111,7 @@ static int smu10_thermal_get_temperature(struct pp_hwmgr *hwmgr) static int smu10_read_sensor(struct pp_hwmgr *hwmgr, int idx, void *value, int *size) { + struct smu10_hwmgr *smu10_data = (struct smu10_hwmgr *)(hwmgr->backend); uint32_t sclk, mclk; int ret = 0; @@ -1132,6 +1133,10 @@ static int smu10_read_sensor(struct pp_hwmgr *hwmgr, int idx, case AMDGPU_PP_SENSOR_GPU_TEMP: *((uint32_t *)value) = smu10_thermal_get_temperature(hwmgr); break; + case AMDGPU_PP_SENSOR_VCN_POWER_STATE: + *(uint32_t *)value = smu10_data->vcn_power_gated ? 0 : 1; + *size = 4; + break; default: ret = -EINVAL; break; @@ -1175,18 +1180,22 @@ static int smu10_powergate_sdma(struct pp_hwmgr *hwmgr, bool gate) static void smu10_powergate_vcn(struct pp_hwmgr *hwmgr, bool bgate) { + struct smu10_hwmgr *smu10_data = (struct smu10_hwmgr *)(hwmgr->backend); + if (bgate) { amdgpu_device_ip_set_powergating_state(hwmgr->adev, AMD_IP_BLOCK_TYPE_VCN, AMD_PG_STATE_GATE); smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_PowerDownVcn, 0); + smu10_data->vcn_power_gated = true; } else { smum_send_msg_to_smc_with_parameter(hwmgr, PPSMC_MSG_PowerUpVcn, 0); amdgpu_device_ip_set_powergating_state(hwmgr->adev, AMD_IP_BLOCK_TYPE_VCN, AMD_PG_STATE_UNGATE); + smu10_data->vcn_power_gated = false; } } -- cgit From e21e3581e2a1df75abb96b545be15e526bd8c1c6 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Mon, 22 Jul 2019 09:57:27 +0800 Subject: drm/amd/powerplay: support VCN powergate status retrieval for SW SMU Commonly used for VCN powergate status retrieval for SW SMU. Signed-off-by: Evan Quan Reviewed-by: Kenneth Feng Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c index 93cd969e5cf5..0685a3388e38 100644 --- a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c @@ -338,6 +338,10 @@ int smu_common_read_sensor(struct smu_context *smu, enum amd_pp_sensors sensor, *(uint32_t *)data = smu_feature_is_enabled(smu, SMU_FEATURE_DPM_VCE_BIT) ? 1 : 0; *size = 4; break; + case AMDGPU_PP_SENSOR_VCN_POWER_STATE: + *(uint32_t *)data = smu_feature_is_enabled(smu, SMU_FEATURE_VCN_PG_BIT) ? 1 : 0; + *size = 4; + break; default: ret = -EINVAL; break; -- cgit From a3ebbdb95f8c343a547ee2abec4d8abbf71f8a94 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Mon, 22 Jul 2019 10:27:21 +0800 Subject: drm/amd/powerplay: correct Navi10 VCN powergate control (v2) No VCN DPM bit check as that's different from VCN PG. Also no extra check for possible double enablement/disablement as that's already done by VCN. v2: check return value of smu_feature_set_enabled Signed-off-by: Evan Quan Reviewed-by: Kenneth Feng Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/navi10_ppt.c | 28 ++++++++++------------------ 1 file changed, 10 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c index be592d22bdcc..cc0a3b2256af 100644 --- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c +++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c @@ -578,28 +578,20 @@ static int navi10_set_default_dpm_table(struct smu_context *smu) static int navi10_dpm_set_uvd_enable(struct smu_context *smu, bool enable) { int ret = 0; - struct smu_power_context *smu_power = &smu->smu_power; - struct smu_power_gate *power_gate = &smu_power->power_gate; - if (enable && power_gate->uvd_gated) { - if (smu_feature_is_enabled(smu, SMU_FEATURE_DPM_UVD_BIT)) { - ret = smu_send_smc_msg_with_param(smu, SMU_MSG_PowerUpVcn, 1); - if (ret) - return ret; - } - power_gate->uvd_gated = false; + if (enable) { + ret = smu_send_smc_msg_with_param(smu, SMU_MSG_PowerUpVcn, 1); + if (ret) + return ret; } else { - if (!enable && !power_gate->uvd_gated) { - if (smu_feature_is_enabled(smu, SMU_FEATURE_DPM_UVD_BIT)) { - ret = smu_send_smc_msg(smu, SMU_MSG_PowerDownVcn); - if (ret) - return ret; - } - power_gate->uvd_gated = true; - } + ret = smu_send_smc_msg(smu, SMU_MSG_PowerDownVcn); + if (ret) + return ret; } - return 0; + ret = smu_feature_set_enabled(smu, SMU_FEATURE_VCN_PG_BIT, enable); + + return ret; } static int navi10_get_current_clk_freq_by_table(struct smu_context *smu, -- cgit From 6dee4829cfde106a8af7d0d3ba23022f8f054761 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Mon, 22 Jul 2019 10:42:29 +0800 Subject: drm/amd/powerplay: correct UVD/VCE/VCN power status retrieval VCN should be used for Vega20 later ASICs while UVD and VCE are for previous ASICs. Signed-off-by: Evan Quan Reviewed-by: Kenneth Feng Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 56 ++++++++++++++++++++++------------ 1 file changed, 36 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c index 8c90baca07b2..2b546567853b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c @@ -3075,28 +3075,44 @@ static int amdgpu_debugfs_pm_info_pp(struct seq_file *m, struct amdgpu_device *a if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_ENABLED_SMC_FEATURES_MASK, (void *)&value64, &size)) seq_printf(m, "SMC Feature Mask: 0x%016llx\n", value64); - /* UVD clocks */ - if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_UVD_POWER, (void *)&value, &size)) { - if (!value) { - seq_printf(m, "UVD: Disabled\n"); - } else { - seq_printf(m, "UVD: Enabled\n"); - if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_UVD_DCLK, (void *)&value, &size)) - seq_printf(m, "\t%u MHz (DCLK)\n", value/100); - if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_UVD_VCLK, (void *)&value, &size)) - seq_printf(m, "\t%u MHz (VCLK)\n", value/100); + if (adev->asic_type > CHIP_VEGA20) { + /* VCN clocks */ + if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_VCN_POWER_STATE, (void *)&value, &size)) { + if (!value) { + seq_printf(m, "VCN: Disabled\n"); + } else { + seq_printf(m, "VCN: Enabled\n"); + if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_UVD_DCLK, (void *)&value, &size)) + seq_printf(m, "\t%u MHz (DCLK)\n", value/100); + if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_UVD_VCLK, (void *)&value, &size)) + seq_printf(m, "\t%u MHz (VCLK)\n", value/100); + } } - } - seq_printf(m, "\n"); + seq_printf(m, "\n"); + } else { + /* UVD clocks */ + if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_UVD_POWER, (void *)&value, &size)) { + if (!value) { + seq_printf(m, "UVD: Disabled\n"); + } else { + seq_printf(m, "UVD: Enabled\n"); + if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_UVD_DCLK, (void *)&value, &size)) + seq_printf(m, "\t%u MHz (DCLK)\n", value/100); + if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_UVD_VCLK, (void *)&value, &size)) + seq_printf(m, "\t%u MHz (VCLK)\n", value/100); + } + } + seq_printf(m, "\n"); - /* VCE clocks */ - if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_VCE_POWER, (void *)&value, &size)) { - if (!value) { - seq_printf(m, "VCE: Disabled\n"); - } else { - seq_printf(m, "VCE: Enabled\n"); - if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_VCE_ECCLK, (void *)&value, &size)) - seq_printf(m, "\t%u MHz (ECCLK)\n", value/100); + /* VCE clocks */ + if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_VCE_POWER, (void *)&value, &size)) { + if (!value) { + seq_printf(m, "VCE: Disabled\n"); + } else { + seq_printf(m, "VCE: Enabled\n"); + if (!amdgpu_dpm_read_sensor(adev, AMDGPU_PP_SENSOR_VCE_ECCLK, (void *)&value, &size)) + seq_printf(m, "\t%u MHz (ECCLK)\n", value/100); + } } } -- cgit From 6963d00bb6e42e91882d2eb36639701aca9fe032 Mon Sep 17 00:00:00 2001 From: Cezary Rojewski Date: Fri, 26 Jul 2019 20:15:17 +0200 Subject: MAINTAINERS: Update Intel ASoC drivers maintainers Adding myself to Intel ASoC drivers maintainers list. Signed-off-by: Cezary Rojewski Acked-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20190726181517.27655-1-cezary.rojewski@intel.com Signed-off-by: Mark Brown --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 11db05b56744..92829ca37459 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7861,6 +7861,7 @@ S: Maintained F: drivers/video/fbdev/i810/ INTEL ASoC DRIVERS +M: Cezary Rojewski M: Pierre-Louis Bossart M: Liam Girdwood M: Jie Yang -- cgit From 52f87f3ca251f5e43b42e78ab9816b2b07718bfe Mon Sep 17 00:00:00 2001 From: Marcus Cooper Date: Mon, 29 Jul 2019 17:21:30 +0200 Subject: ASoC: sun4i-i2s: Incorrect SR and WSS computation The A64 audio codec uses the original I2S block but the SR and WSS computation currently assigned is for the newer block. Fixes: 619c15f7fac9 (ASoC: sun4i-i2s: Change SR and WSS computation) Signed-off-by: Marcus Cooper Link: https://lore.kernel.org/r/20190729152130.27955-1-codekipper@gmail.com Signed-off-by: Mark Brown --- sound/soc/sunxi/sun4i-i2s.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c index 9b2232908b65..7fa5c61169db 100644 --- a/sound/soc/sunxi/sun4i-i2s.c +++ b/sound/soc/sunxi/sun4i-i2s.c @@ -1002,8 +1002,8 @@ static const struct sun4i_i2s_quirks sun50i_a64_codec_i2s_quirks = { .field_rxchanmap = REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31), .field_txchansel = REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2), .field_rxchansel = REG_FIELD(SUN4I_I2S_RX_CHAN_SEL_REG, 0, 2), - .get_sr = sun8i_i2s_get_sr_wss, - .get_wss = sun8i_i2s_get_sr_wss, + .get_sr = sun4i_i2s_get_sr, + .get_wss = sun4i_i2s_get_wss, }; static int sun4i_i2s_init_regmap_fields(struct device *dev, -- cgit From b9da500bde81ad820b5d95c6bf52fc33e1f490ee Mon Sep 17 00:00:00 2001 From: fengchunguo Date: Wed, 31 Jul 2019 15:41:56 +0800 Subject: ASoC: max98373: add 88200 and 96000 sampling rate support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 88200 and 96000 sampling rate was not enabled on driver, so can't be played. The error information: max98373 3-0031：rate 96000 not supported max98373 3-0031：ASoC: can't set max98373-aif1 hw params: -22 Signed-off-by: fengchunguo Link: https://lore.kernel.org/r/20190731074156.5620-1-chunguo.feng@amlogic.com Signed-off-by: Mark Brown --- sound/soc/codecs/max98373.c | 6 ++++++ sound/soc/codecs/max98373.h | 2 ++ 2 files changed, 8 insertions(+) mode change 100644 => 100755 sound/soc/codecs/max98373.c mode change 100644 => 100755 sound/soc/codecs/max98373.h diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c old mode 100644 new mode 100755 index 528695cd6a1c..8c601a3ebc27 --- a/sound/soc/codecs/max98373.c +++ b/sound/soc/codecs/max98373.c @@ -267,6 +267,12 @@ static int max98373_dai_hw_params(struct snd_pcm_substream *substream, case 48000: sampling_rate = MAX98373_PCM_SR_SET1_SR_48000; break; + case 88200: + sampling_rate = MAX98373_PCM_SR_SET1_SR_88200; + break; + case 96000: + sampling_rate = MAX98373_PCM_SR_SET1_SR_96000; + break; default: dev_err(component->dev, "rate %d not supported\n", params_rate(params)); diff --git a/sound/soc/codecs/max98373.h b/sound/soc/codecs/max98373.h old mode 100644 new mode 100755 index f6a37aa02f26..a59e51355a84 --- a/sound/soc/codecs/max98373.h +++ b/sound/soc/codecs/max98373.h @@ -130,6 +130,8 @@ #define MAX98373_PCM_SR_SET1_SR_32000 (0x6 << 0) #define MAX98373_PCM_SR_SET1_SR_44100 (0x7 << 0) #define MAX98373_PCM_SR_SET1_SR_48000 (0x8 << 0) +#define MAX98373_PCM_SR_SET1_SR_88200 (0x9 << 0) +#define MAX98373_PCM_SR_SET1_SR_96000 (0xA << 0) /* MAX98373_R2028_PCM_SR_SETUP_2 */ #define MAX98373_PCM_SR_SET2_SR_MASK (0xF << 4) -- cgit From 7440ea8b2a4430eef5120d0a7faac6c39304ae6d Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 30 Jul 2019 14:37:04 +1000 Subject: drivers/macintosh/smu.c: Mark expected switch fall-through Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: powerpc): drivers/macintosh/smu.c: In function 'smu_queue_i2c': drivers/macintosh/smu.c:854:21: warning: this statement may fall through [-Wimplicit-fallthrough=] cmd->info.devaddr &= 0xfe; ~~~~~~~~~~~~~~~~~~^~~~~~~ drivers/macintosh/smu.c:855:2: note: here case SMU_I2C_TRANSFER_STDSUB: ^~~~ Fixes: 0365ba7fb1fa ("[PATCH] ppc64: SMU driver update & i2c support") Signed-off-by: Stephen Rothwell Reviewed-by: Kees Cook Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20190730143704.060a2606@canb.auug.org.au --- drivers/macintosh/smu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index 276065c888bc..23f1f41c8602 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -852,6 +852,7 @@ int smu_queue_i2c(struct smu_i2c_cmd *cmd) break; case SMU_I2C_TRANSFER_COMBINED: cmd->info.devaddr &= 0xfe; + /* fall through */ case SMU_I2C_TRANSFER_STDSUB: if (cmd->info.sublen > 3) return -EINVAL; -- cgit From d7e23b887f67178c4f840781be7a6aa6aeb52ab1 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Wed, 31 Jul 2019 06:01:42 +0000 Subject: powerpc/kasan: fix early boot failure on PPC32 Due to commit 4a6d8cf90017 ("powerpc/mm: don't use pte_alloc_kernel() until slab is available on PPC32"), pte_alloc_kernel() cannot be used during early KASAN init. Fix it by using memblock_alloc() instead. Fixes: 2edb16efc899 ("powerpc/32: Add KASAN support") Cc: stable@vger.kernel.org # v5.2+ Reported-by: Erhard F. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/da89670093651437f27d2975224712e0a130b055.1564552796.git.christophe.leroy@c-s.fr --- arch/powerpc/mm/kasan/kasan_init_32.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/mm/kasan/kasan_init_32.c b/arch/powerpc/mm/kasan/kasan_init_32.c index 0d62be3cba47..74f4555a62ba 100644 --- a/arch/powerpc/mm/kasan/kasan_init_32.c +++ b/arch/powerpc/mm/kasan/kasan_init_32.c @@ -21,7 +21,7 @@ static void kasan_populate_pte(pte_t *ptep, pgprot_t prot) __set_pte_at(&init_mm, va, ptep, pfn_pte(PHYS_PFN(pa), prot), 0); } -static int kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_end) +static int __ref kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_end) { pmd_t *pmd; unsigned long k_cur, k_next; @@ -35,7 +35,10 @@ static int kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_ if ((void *)pmd_page_vaddr(*pmd) != kasan_early_shadow_pte) continue; - new = pte_alloc_one_kernel(&init_mm); + if (slab_is_available()) + new = pte_alloc_one_kernel(&init_mm); + else + new = memblock_alloc(PTE_FRAG_SIZE, PTE_FRAG_SIZE); if (!new) return -ENOMEM; -- cgit From ed4289e8b48845888ee46377bd2b55884a55e60b Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Mon, 29 Jul 2019 22:28:54 +1000 Subject: Revert "powerpc: slightly improve cache helpers" This reverts commit 6c5875843b87c3adea2beade9d1b8b3d4523900a. It triggers a probable compiler bug on clang which leads to crashes. With GCC it allows the compiler to use a more efficient register allocation but current GCC versions never do that at any of the current call sites, so there's no benefit. Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/cache.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h index b3388d95f451..45e3137ccd71 100644 --- a/arch/powerpc/include/asm/cache.h +++ b/arch/powerpc/include/asm/cache.h @@ -107,22 +107,22 @@ extern void _set_L3CR(unsigned long); static inline void dcbz(void *addr) { - __asm__ __volatile__ ("dcbz %y0" : : "Z"(*(u8 *)addr) : "memory"); + __asm__ __volatile__ ("dcbz 0, %0" : : "r"(addr) : "memory"); } static inline void dcbi(void *addr) { - __asm__ __volatile__ ("dcbi %y0" : : "Z"(*(u8 *)addr) : "memory"); + __asm__ __volatile__ ("dcbi 0, %0" : : "r"(addr) : "memory"); } static inline void dcbf(void *addr) { - __asm__ __volatile__ ("dcbf %y0" : : "Z"(*(u8 *)addr) : "memory"); + __asm__ __volatile__ ("dcbf 0, %0" : : "r"(addr) : "memory"); } static inline void dcbst(void *addr) { - __asm__ __volatile__ ("dcbst %y0" : : "Z"(*(u8 *)addr) : "memory"); + __asm__ __volatile__ ("dcbst 0, %0" : : "r"(addr) : "memory"); } #endif /* !__ASSEMBLY__ */ #endif /* __KERNEL__ */ -- cgit From e77ff779a0c6666b697c56a6e41972bbf30b977f Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Wed, 31 Jul 2019 06:48:09 -0700 Subject: Input: applespi - add dependency on LEDS_CLASS If applespi is enabled, but LEDs class support is not, the build fails: drivers/input/keyboard/applespi.o: In function `applespi_probe': applespi.c:(.text+0x1fcd): undefined reference to `devm_led_classdev_register_ext' Add "depends on LEDS_CLASS" to the Konfig Reported-by: Hulk Robot Fixes: 038b1a05eae6 ("Input: add Apple SPI keyboard and trackpad driver") Signed-off-by: YueHaibing Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index ebb19e21473e..90e8a7f2f07c 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -76,6 +76,7 @@ config KEYBOARD_APPLESPI depends on ACPI && EFI depends on SPI depends on X86 || COMPILE_TEST + depends on LEDS_CLASS select CRC16 help Say Y here if you are running Linux on any Apple MacBook8,1 or later, -- cgit From 12d1402ce35a900b4273893b885ddf35dbea0571 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 31 Jul 2019 16:16:00 +0200 Subject: parisc: Mark expected switch fall-throughs in fault.c Fix a fall-through warning in fault.c. Fixes: a035d552a93b ("Makefile: Globally enable fall-through warning") Signed-off-by: Helge Deller --- arch/parisc/mm/fault.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index 6dd4669ce7a5..adbd5e2144a3 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -66,6 +66,7 @@ parisc_acctyp(unsigned long code, unsigned int inst) case 0x30000000: /* coproc2 */ if (bit22set(inst)) return VM_WRITE; + /* fall through */ case 0x0: /* indexed/memory management */ if (bit22set(inst)) { -- cgit From 73b886724747ea5fa599ada988fe0a30edcc2e00 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 31 Jul 2019 16:16:43 +0200 Subject: parisc: Fix fall-through warnings in fpudispatch.c In fpudispatch.c we see a lot of fall-through warnings, but for this file we prefer to not mark the switches and instead keep it in it's original state as it's copied from HP-UX. Fixes: a035d552a93b ("Makefile: Globally enable fall-through warning") Signed-off-by: Helge Deller --- arch/parisc/math-emu/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/parisc/math-emu/Makefile b/arch/parisc/math-emu/Makefile index b6c4b254901a..55c1396580a4 100644 --- a/arch/parisc/math-emu/Makefile +++ b/arch/parisc/math-emu/Makefile @@ -18,3 +18,4 @@ obj-y := frnd.o driver.o decode_exc.o fpudispatch.o denormal.o \ # other very old or stripped-down PA-RISC CPUs -- not currently supported obj-$(CONFIG_MATH_EMULATION) += unimplemented-math-emulation.o +CFLAGS_REMOVE_fpudispatch.o = -Wimplicit-fallthrough=3 -- cgit From c5df04521b521f14c30de327aa1e880f1190a355 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 23 Jul 2019 18:47:51 +0900 Subject: parisc: rename default_defconfig to defconfig 'default_defconfig' is an awkward name since 'defconfig' is the default. Let's simply say 'defconfig' like other architectures. You can drop the KBUILD_DEFCONFIG define by following the standard naming. Signed-off-by: Masahiro Yamada Signed-off-by: Helge Deller --- arch/parisc/Makefile | 2 - arch/parisc/configs/default_defconfig | 206 ---------------------------------- arch/parisc/configs/defconfig | 206 ++++++++++++++++++++++++++++++++++ 3 files changed, 206 insertions(+), 208 deletions(-) delete mode 100644 arch/parisc/configs/default_defconfig create mode 100644 arch/parisc/configs/defconfig diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 8acb8fa1f8d6..b10a1179291a 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -19,8 +19,6 @@ KBUILD_IMAGE := vmlinuz -KBUILD_DEFCONFIG := default_defconfig - NM = sh $(srctree)/arch/parisc/nm CHECKFLAGS += -D__hppa__=1 LIBGCC = $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/default_defconfig deleted file mode 100644 index 5b877ca34ebf..000000000000 --- a/arch/parisc/configs/default_defconfig +++ /dev/null @@ -1,206 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PA7100LC=y -CONFIG_PREEMPT_VOLUNTARY=y -CONFIG_IOMMU_CCIO=y -CONFIG_GSC_LASI=y -CONFIG_GSC_WAX=y -CONFIG_EISA=y -CONFIG_PCI=y -CONFIG_GSC_DINO=y -CONFIG_PCI_LBA=y -CONFIG_PCCARD=y -CONFIG_YENTA=y -CONFIG_PD6729=y -CONFIG_I82092=y -CONFIG_BINFMT_MISC=m -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_DIAG=m -CONFIG_INET6_AH=y -CONFIG_INET6_ESP=y -CONFIG_INET6_IPCOMP=y -CONFIG_LLC2=m -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_PARPORT=y -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_PC_PCMCIA=m -CONFIG_PARPORT_1284=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECS=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_NS87415=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -CONFIG_BLK_DEV_SR=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_LASI700=y -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_SCSI_ZALON=y -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=y -CONFIG_BLK_DEV_DM=y -CONFIG_NETDEVICES=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_TUN=m -CONFIG_ACENIC=y -CONFIG_TIGON3=y -CONFIG_NET_TULIP=y -CONFIG_TULIP=y -CONFIG_LASI_82596=y -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -# CONFIG_KEYBOARD_HIL_OLD is not set -CONFIG_MOUSE_SERIAL=y -CONFIG_LEGACY_PTY_COUNT=64 -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_CS=y -CONFIG_SERIAL_8250_NR_UARTS=17 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_PRINTER=m -CONFIG_PPDEV=m -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -CONFIG_DUMMY_CONSOLE_COLUMNS=128 -CONFIG_DUMMY_CONSOLE_ROWS=48 -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -# CONFIG_LOGO_LINUX_CLUT224 is not set -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_DYNAMIC_MINORS=y -CONFIG_SND_SEQUENCER=y -CONFIG_SND_AD1889=y -CONFIG_SND_HARMONY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_NTRIG=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SUNPLUS=y -CONFIG_HID_TOPSEED=y -CONFIG_USB=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_VFAT_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -CONFIG_NFSD_V4=y -CONFIG_CIFS=m -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=y -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=y -CONFIG_DEBUG_FS=y -CONFIG_HEADERS_INSTALL=y -CONFIG_HEADERS_CHECK=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_KEYS=y -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -# CONFIG_CRYPTO_HW is not set -CONFIG_LIBCRC32C=m -CONFIG_FONTS=y diff --git a/arch/parisc/configs/defconfig b/arch/parisc/configs/defconfig new file mode 100644 index 000000000000..5b877ca34ebf --- /dev/null +++ b/arch/parisc/configs/defconfig @@ -0,0 +1,206 @@ +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_BLK_DEV_INITRD=y +CONFIG_KALLSYMS_ALL=y +CONFIG_SLAB=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=m +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PA7100LC=y +CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_IOMMU_CCIO=y +CONFIG_GSC_LASI=y +CONFIG_GSC_WAX=y +CONFIG_EISA=y +CONFIG_PCI=y +CONFIG_GSC_DINO=y +CONFIG_PCI_LBA=y +CONFIG_PCCARD=y +CONFIG_YENTA=y +CONFIG_PD6729=y +CONFIG_I82092=y +CONFIG_BINFMT_MISC=m +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_DIAG=m +CONFIG_INET6_AH=y +CONFIG_INET6_ESP=y +CONFIG_INET6_IPCOMP=y +CONFIG_LLC2=m +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_PARPORT=y +CONFIG_PARPORT_PC=m +CONFIG_PARPORT_PC_PCMCIA=m +CONFIG_PARPORT_1284=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=6144 +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_NS87415=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +CONFIG_BLK_DEV_SR=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_LASI700=y +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_ZALON=y +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=y +CONFIG_BLK_DEV_DM=y +CONFIG_NETDEVICES=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_TUN=m +CONFIG_ACENIC=y +CONFIG_TIGON3=y +CONFIG_NET_TULIP=y +CONFIG_TULIP=y +CONFIG_LASI_82596=y +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPPOE=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +# CONFIG_KEYBOARD_HIL_OLD is not set +CONFIG_MOUSE_SERIAL=y +CONFIG_LEGACY_PTY_COUNT=64 +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_CS=y +CONFIG_SERIAL_8250_NR_UARTS=17 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_PRINTER=m +CONFIG_PPDEV=m +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +CONFIG_DUMMY_CONSOLE_COLUMNS=128 +CONFIG_DUMMY_CONSOLE_ROWS=48 +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_AD1889=y +CONFIG_SND_HARMONY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_TOPSEED=y +CONFIG_USB=y +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_VFAT_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_NFSD_V4=y +CONFIG_CIFS=m +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +CONFIG_DEBUG_FS=y +CONFIG_HEADERS_INSTALL=y +CONFIG_HEADERS_CHECK=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_KEYS=y +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +# CONFIG_CRYPTO_HW is not set +CONFIG_LIBCRC32C=m +CONFIG_FONTS=y -- cgit From 740f05f30a8c49ec63668055d28feedd906d3c50 Mon Sep 17 00:00:00 2001 From: Sven Schnelle Date: Tue, 23 Jul 2019 22:37:54 +0200 Subject: parisc: fix race condition in patching code Assume the following ftrace code sequence that was patched in earlier by ftrace_make_call(): PAGE A: ffc: addr of ftrace_caller() PAGE B: 000: 0x6fc10080 /* stw,ma r1,40(sp) */ 004: 0x48213fd1 /* ldw -18(r1),r1 */ 008: 0xe820c002 /* bv,n r0(r1) */ 00c: 0xe83f1fdf /* b,l,n .-c,r1 */ When a Code sequences that is to be patched spans a page break, we might have already cleared the part on the PAGE A. If an interrupt is coming in during the remap of the fixed mapping to PAGE B, it might execute the patched function with only parts of the FTRACE code cleared. To prevent this, clear the jump to our mini trampoline first, and clear the remaining parts after this. This might also happen when patch_text() patches a function that it calls during remap. Signed-off-by: Sven Schnelle Cc: # 5.2+ Signed-off-by: Helge Deller --- arch/parisc/kernel/ftrace.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/parisc/kernel/ftrace.c b/arch/parisc/kernel/ftrace.c index d784ccdd8fef..b6fb30f2e4bf 100644 --- a/arch/parisc/kernel/ftrace.c +++ b/arch/parisc/kernel/ftrace.c @@ -181,8 +181,9 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, for (i = 0; i < ARRAY_SIZE(insn); i++) insn[i] = INSN_NOP; + __patch_text((void *)rec->ip, INSN_NOP); __patch_text_multiple((void *)rec->ip + 4 - sizeof(insn), - insn, sizeof(insn)); + insn, sizeof(insn)-4); return 0; } #endif -- cgit From d0ee879187df966ef638031b5f5183078d672141 Mon Sep 17 00:00:00 2001 From: Jackie Liu Date: Wed, 31 Jul 2019 14:39:33 +0800 Subject: io_uring: fix KASAN use after free in io_sq_wq_submit_work [root@localhost ~]# ./liburing/test/link QEMU Standard PC report that: [ 29.379892] CPU: 0 PID: 84 Comm: kworker/u2:2 Not tainted 5.3.0-rc2-00051-g4010b622f1d2-dirty #86 [ 29.379902] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 29.379913] Workqueue: io_ring-wq io_sq_wq_submit_work [ 29.379929] Call Trace: [ 29.379953] dump_stack+0xa9/0x10e [ 29.379970] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.379986] print_address_description.cold.6+0x9/0x317 [ 29.379999] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380010] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380026] __kasan_report.cold.7+0x1a/0x34 [ 29.380044] ? io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380061] kasan_report+0xe/0x12 [ 29.380076] io_sq_wq_submit_work+0xbf4/0xe90 [ 29.380104] ? io_sq_thread+0xaf0/0xaf0 [ 29.380152] process_one_work+0xb59/0x19e0 [ 29.380184] ? pwq_dec_nr_in_flight+0x2c0/0x2c0 [ 29.380221] worker_thread+0x8c/0xf40 [ 29.380248] ? __kthread_parkme+0xab/0x110 [ 29.380265] ? process_one_work+0x19e0/0x19e0 [ 29.380278] kthread+0x30b/0x3d0 [ 29.380292] ? kthread_create_on_node+0xe0/0xe0 [ 29.380311] ret_from_fork+0x3a/0x50 [ 29.380635] Allocated by task 209: [ 29.381255] save_stack+0x19/0x80 [ 29.381268] __kasan_kmalloc.constprop.6+0xc1/0xd0 [ 29.381279] kmem_cache_alloc+0xc0/0x240 [ 29.381289] io_submit_sqe+0x11bc/0x1c70 [ 29.381300] io_ring_submit+0x174/0x3c0 [ 29.381311] __x64_sys_io_uring_enter+0x601/0x780 [ 29.381322] do_syscall_64+0x9f/0x4d0 [ 29.381336] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 29.381633] Freed by task 84: [ 29.382186] save_stack+0x19/0x80 [ 29.382198] __kasan_slab_free+0x11d/0x160 [ 29.382210] kmem_cache_free+0x8c/0x2f0 [ 29.382220] io_put_req+0x22/0x30 [ 29.382230] io_sq_wq_submit_work+0x28b/0xe90 [ 29.382241] process_one_work+0xb59/0x19e0 [ 29.382251] worker_thread+0x8c/0xf40 [ 29.382262] kthread+0x30b/0x3d0 [ 29.382272] ret_from_fork+0x3a/0x50 [ 29.382569] The buggy address belongs to the object at ffff888067172140 which belongs to the cache io_kiocb of size 224 [ 29.384692] The buggy address is located 120 bytes inside of 224-byte region [ffff888067172140, ffff888067172220) [ 29.386723] The buggy address belongs to the page: [ 29.387575] page:ffffea00019c5c80 refcount:1 mapcount:0 mapping:ffff88806ace5180 index:0x0 [ 29.387587] flags: 0x100000000000200(slab) [ 29.387603] raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806ace5180 [ 29.387617] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 [ 29.387624] page dumped because: kasan: bad access detected [ 29.387920] Memory state around the buggy address: [ 29.388771] ffff888067172080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 29.390062] ffff888067172100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 29.391325] >ffff888067172180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 29.392578] ^ [ 29.393480] ffff888067172200: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 29.394744] ffff888067172280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 29.396003] ================================================================== [ 29.397260] Disabling lock debugging due to kernel taint io_sq_wq_submit_work free and read req again. Cc: Zhengyuan Liu Cc: linux-block@vger.kernel.org Cc: stable@vger.kernel.org Fixes: f7b76ac9d17e ("io_uring: fix counter inc/dec mismatch in async_list") Signed-off-by: Jackie Liu Signed-off-by: Jens Axboe --- fs/io_uring.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/io_uring.c b/fs/io_uring.c index 012bc0efb9d3..d542f1cf4428 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -1838,6 +1838,7 @@ restart: do { struct sqe_submit *s = &req->submit; const struct io_uring_sqe *sqe = s->sqe; + unsigned int flags = req->flags; /* Ensure we clear previously set non-block flag */ req->rw.ki_flags &= ~IOCB_NOWAIT; @@ -1883,7 +1884,7 @@ restart: kfree(sqe); /* req from defer and link list needn't decrease async cnt */ - if (req->flags & (REQ_F_IO_DRAINED | REQ_F_LINK_DONE)) + if (flags & (REQ_F_IO_DRAINED | REQ_F_LINK_DONE)) goto out; if (!async_list) -- cgit From 090bb803708198e5ab6b0046398c7ed9f4d12d6b Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Wed, 31 Jul 2019 14:26:51 +0200 Subject: ata: libahci: do not complain in case of deferred probe Retrieving PHYs can defer the probe, do not spawn an error when -EPROBE_DEFER is returned, it is normal behavior. Fixes: b1a9edbda040 ("ata: libahci: allow to use multiple PHYs") Reviewed-by: Hans de Goede Signed-off-by: Miquel Raynal Signed-off-by: Jens Axboe --- drivers/ata/libahci_platform.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c index 3a36e76eca83..9e9583a6bba9 100644 --- a/drivers/ata/libahci_platform.c +++ b/drivers/ata/libahci_platform.c @@ -338,6 +338,9 @@ static int ahci_platform_get_phy(struct ahci_host_priv *hpriv, u32 port, hpriv->phys[port] = NULL; rc = 0; break; + case -EPROBE_DEFER: + /* Do not complain yet */ + break; default: dev_err(dev, -- cgit From 2b5c8f0063e4b263cf2de82029798183cf85c320 Mon Sep 17 00:00:00 2001 From: Munehisa Kamata Date: Wed, 31 Jul 2019 20:13:10 +0800 Subject: nbd: replace kill_bdev() with __invalidate_device() again Commit abbbdf12497d ("replace kill_bdev() with __invalidate_device()") once did this, but 29eaadc03649 ("nbd: stop using the bdev everywhere") resurrected kill_bdev() and it has been there since then. So buffer_head mappings still get killed on a server disconnection, and we can still hit the BUG_ON on a filesystem on the top of the nbd device. EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null) block nbd0: Receive control failed (result -32) block nbd0: shutting down sockets print_req_error: I/O error, dev nbd0, sector 66264 flags 3000 EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block print_req_error: I/O error, dev nbd0, sector 2264 flags 3000 EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure ------------[ cut here ]------------ kernel BUG at fs/buffer.c:3057! invalid opcode: 0000 [#1] SMP PTI CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ #4 Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:submit_bh_wbc+0x18b/0x190 ... Call Trace: jbd2_write_superblock+0xf1/0x230 [jbd2] ? account_entity_enqueue+0xc5/0xf0 jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2] jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2] ? __switch_to_asm+0x40/0x70 ... ? lock_timer_base+0x67/0x80 kjournald2+0x121/0x360 [jbd2] ? remove_wait_queue+0x60/0x60 kthread+0xf8/0x130 ? commit_timeout+0x10/0x10 [jbd2] ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 With __invalidate_device(), I no longer hit the BUG_ON with sync or unmount on the disconnected device. Fixes: 29eaadc03649 ("nbd: stop using the bdev everywhere") Cc: linux-block@vger.kernel.org Cc: Ratna Manoj Bolla Cc: nbd@other.debian.org Cc: stable@vger.kernel.org Cc: David Woodhouse Reviewed-by: Josef Bacik Signed-off-by: Munehisa Kamata Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 9bcde2325893..e21d2ded732b 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -1231,7 +1231,7 @@ static void nbd_clear_sock_ioctl(struct nbd_device *nbd, struct block_device *bdev) { sock_shutdown(nbd); - kill_bdev(bdev); + __invalidate_device(bdev, true); nbd_bdev_reset(bdev); if (test_and_clear_bit(NBD_HAS_CONFIG_REF, &nbd->config->runtime_flags)) -- cgit From dc25ace66c74ca148c393952bd2ce0856029c692 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 26 Jul 2019 22:25:20 +0200 Subject: drm/i810: Use CONFIG_PREEMPTION CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT. Both PREEMPT and PREEMPT_RT require the same functionality which today depends on CONFIG_PREEMPT. Change the Kconfig dependency of i810 to !CONFIG_PREEMPTION so the driver is not accidentally built on a RT kernel. Signed-off-by: Thomas Gleixner Cc: dri-devel@lists.freedesktop.org Cc: Maarten Lankhorst Cc: David Airlie Cc: Daniel Vetter Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.21.1907262223280.1791@nanos.tec.linutronix.de --- drivers/gpu/drm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 1d80222587ad..3c88420e3497 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -394,7 +394,7 @@ config DRM_R128 config DRM_I810 tristate "Intel I810" # !PREEMPT because of missing ioctl locking - depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN) + depends on DRM && AGP && AGP_INTEL && (!PREEMPTION || BROKEN) help Choose this option if you have an Intel I810 graphics card. If M is selected, the module will be called i810. AGP support is required -- cgit From 944cfe9be1fbbec73bab2f7e77fe2e8f9c72970f Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 31 Jul 2019 00:58:59 +0900 Subject: kbuild: modpost: include .*.cmd files only when targets exist If a build rule fails, the .DELETE_ON_ERROR special target removes the target, but does nothing for the .*.cmd file, which might be corrupted. So, .*.cmd files should be included only when the corresponding targets exist. Commit 392885ee82d3 ("kbuild: let fixdep directly write to .*.cmd files") missed to fix up this file. Fixes: 392885ee82d3 ("kbuild: let fixdep directly write to .*.cmd") Cc: # v5.0+ Signed-off-by: Masahiro Yamada --- scripts/Makefile.modpost | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index 6b19c1a4eae5..ad4b9829a456 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -145,10 +145,8 @@ FORCE: # optimization, we don't need to read them if the target does not # exist, we will rebuild anyway in that case. -cmd_files := $(wildcard $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd)) +existing-targets := $(wildcard $(sort $(targets))) -ifneq ($(cmd_files),) - include $(cmd_files) -endif +-include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd) .PHONY: $(PHONY) -- cgit From cb4819934a7f9b87876f11ed05b8624c0114551b Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 31 Jul 2019 00:59:00 +0900 Subject: kbuild: modpost: handle KBUILD_EXTRA_SYMBOLS only for external modules KBUILD_EXTRA_SYMBOLS makes sense only when building external modules. Moreover, the modpost sets 'external_module' if the -e option is given. I replaced $(patsubst %, -e %,...) with simpler $(addprefix -e,...) while I was here. Signed-off-by: Masahiro Yamada --- scripts/Makefile.modpost | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index ad4b9829a456..c856512349cd 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -78,7 +78,7 @@ modpost = scripts/mod/modpost \ $(if $(CONFIG_MODULE_SRCVERSION_ALL),-a,) \ $(if $(KBUILD_EXTMOD),-i,-o) $(kernelsymfile) \ $(if $(KBUILD_EXTMOD),-I $(modulesymfile)) \ - $(if $(KBUILD_EXTRA_SYMBOLS), $(patsubst %, -e %,$(KBUILD_EXTRA_SYMBOLS))) \ + $(if $(KBUILD_EXTMOD),$(addprefix -e ,$(KBUILD_EXTRA_SYMBOLS))) \ $(if $(KBUILD_EXTMOD),-o $(modulesymfile)) \ $(if $(CONFIG_SECTION_MISMATCH_WARN_ONLY),,-E) \ $(if $(KBUILD_MODPOST_WARN),-w) -- cgit From acf2a1397a686365775385ed4657941119172263 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 31 Jul 2019 00:59:01 +0900 Subject: kbuild: modpost: remove unnecessary dependency for __modpost __modpost is a phony target. The dependency on FORCE is pointless. All the objects have been built in the previous stage, so the dependency on the objects are not necessary either. Count the number of modules in a more straightforward way. Signed-off-by: Masahiro Yamada --- scripts/Makefile.modpost | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index c856512349cd..fdab32d6f552 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -86,11 +86,11 @@ modpost = scripts/mod/modpost \ MODPOST_OPT=$(subst -i,-n,$(filter -i,$(MAKEFLAGS))) # We can go over command line length here, so be careful. -quiet_cmd_modpost = MODPOST $(words $(filter-out vmlinux FORCE, $^)) modules +quiet_cmd_modpost = MODPOST $(words $(modules)) modules cmd_modpost = sed 's/ko$$/o/' $(modorder) | $(modpost) $(MODPOST_OPT) -s -T - PHONY += __modpost -__modpost: $(modules:.ko=.o) FORCE +__modpost: $(call cmd,modpost) $(wildcard vmlinux) quiet_cmd_kernel-mod = MODPOST $@ -- cgit From a721588d9475cbbf9e8b3ae1a69b1dea88d01653 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 31 Jul 2019 00:59:02 +0900 Subject: kbuild: modpost: do not parse unnecessary rules for vmlinux modpost Since commit ff9b45c55b26 ("kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod"), 'make vmlinux' emits a warning, like this: $ make defconfig vmlinux [ snip ] LD vmlinux.o cat: modules.order: No such file or directory MODPOST vmlinux.o MODINFO modules.builtin.modinfo KSYM .tmp_kallsyms1.o KSYM .tmp_kallsyms2.o LD vmlinux SORTEX vmlinux SYSMAP System.map When building only vmlinux, KBUILD_MODULES is not set. Hence, the modules.order is not generated. For the vmlinux modpost, it is not necessary at all. Separate scripts/Makefile.modpost for the vmlinux/modules stages. This works more efficiently because the vmlinux modpost does not need to include .*.cmd files. Fixes: ff9b45c55b26 ("kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod") Signed-off-by: Masahiro Yamada --- scripts/Makefile.modpost | 76 ++++++++++++++++++++++++++---------------------- scripts/link-vmlinux.sh | 2 +- 2 files changed, 42 insertions(+), 36 deletions(-) diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index fdab32d6f552..92ed02d7cd5e 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -38,12 +38,39 @@ # symbols in the final module linking stage # KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules. # This is solely useful to speed up test compiles -PHONY := _modpost -_modpost: __modpost + +PHONY := __modpost +__modpost: include include/config/auto.conf include scripts/Kbuild.include +kernelsymfile := $(objtree)/Module.symvers +modulesymfile := $(firstword $(KBUILD_EXTMOD))/Module.symvers + +MODPOST = scripts/mod/modpost \ + $(if $(CONFIG_MODVERSIONS),-m) \ + $(if $(CONFIG_MODULE_SRCVERSION_ALL),-a) \ + $(if $(KBUILD_EXTMOD),-i,-o) $(kernelsymfile) \ + $(if $(KBUILD_EXTMOD),-I $(modulesymfile)) \ + $(if $(KBUILD_EXTMOD),$(addprefix -e ,$(KBUILD_EXTRA_SYMBOLS))) \ + $(if $(KBUILD_EXTMOD),-o $(modulesymfile)) \ + $(if $(CONFIG_SECTION_MISMATCH_WARN_ONLY),,-E) \ + $(if $(KBUILD_MODPOST_WARN),-w) + +ifdef MODPOST_VMLINUX + +__modpost: vmlinux.o + +quiet_cmd_modpost = MODPOST $@ + cmd_modpost = $(MODPOST) $@ + +PHONY += vmlinux.o +vmlinux.o: + $(call cmd,modpost) + +else + # When building external modules load the Kbuild file to retrieve EXTRA_SYMBOLS info ifneq ($(KBUILD_EXTMOD),) @@ -58,50 +85,27 @@ endif include scripts/Makefile.lib -kernelsymfile := $(objtree)/Module.symvers -modulesymfile := $(firstword $(KBUILD_EXTMOD))/Module.symvers - modorder := $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/)modules.order -# Step 1), find all modules listed in modules.order -ifdef CONFIG_MODULES +# find all modules listed in modules.order modules := $(sort $(shell cat $(modorder))) -endif # Stop after building .o files if NOFINAL is set. Makes compile tests quicker -_modpost: $(if $(KBUILD_MODPOST_NOFINAL), $(modules:.ko:.o),$(modules)) - -# Step 2), invoke modpost -# Includes step 3,4 -modpost = scripts/mod/modpost \ - $(if $(CONFIG_MODVERSIONS),-m) \ - $(if $(CONFIG_MODULE_SRCVERSION_ALL),-a,) \ - $(if $(KBUILD_EXTMOD),-i,-o) $(kernelsymfile) \ - $(if $(KBUILD_EXTMOD),-I $(modulesymfile)) \ - $(if $(KBUILD_EXTMOD),$(addprefix -e ,$(KBUILD_EXTRA_SYMBOLS))) \ - $(if $(KBUILD_EXTMOD),-o $(modulesymfile)) \ - $(if $(CONFIG_SECTION_MISMATCH_WARN_ONLY),,-E) \ - $(if $(KBUILD_MODPOST_WARN),-w) - -MODPOST_OPT=$(subst -i,-n,$(filter -i,$(MAKEFLAGS))) +__modpost: $(if $(KBUILD_MODPOST_NOFINAL), $(modules:.ko:.o),$(modules)) + @: + +MODPOST += $(subst -i,-n,$(filter -i,$(MAKEFLAGS))) -s -T - $(wildcard vmlinux) # We can go over command line length here, so be careful. quiet_cmd_modpost = MODPOST $(words $(modules)) modules - cmd_modpost = sed 's/ko$$/o/' $(modorder) | $(modpost) $(MODPOST_OPT) -s -T - + cmd_modpost = sed 's/ko$$/o/' $(modorder) | $(MODPOST) -PHONY += __modpost -__modpost: - $(call cmd,modpost) $(wildcard vmlinux) - -quiet_cmd_kernel-mod = MODPOST $@ - cmd_kernel-mod = $(modpost) $@ - -vmlinux.o: FORCE - $(call cmd,kernel-mod) +PHONY += modules-modpost +modules-modpost: + $(call cmd,modpost) # Declare generated files as targets for modpost -$(modules:.ko=.mod.c): __modpost ; - +$(modules:.ko=.mod.c): modules-modpost # Step 5), compile all *.mod.c files @@ -149,4 +153,6 @@ existing-targets := $(wildcard $(sort $(targets))) -include $(foreach f,$(existing-targets),$(dir $(f)).$(notdir $(f)).cmd) +endif + .PHONY: $(PHONY) diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh index a7124f895b24..915775eb2921 100755 --- a/scripts/link-vmlinux.sh +++ b/scripts/link-vmlinux.sh @@ -210,7 +210,7 @@ info LD vmlinux.o modpost_link vmlinux.o # modpost vmlinux.o to check for section mismatches -${MAKE} -f "${srctree}/scripts/Makefile.modpost" vmlinux.o +${MAKE} -f "${srctree}/scripts/Makefile.modpost" MODPOST_VMLINUX=1 info MODINFO modules.builtin.modinfo ${OBJCOPY} -j .modinfo -O binary vmlinux.o modules.builtin.modinfo -- cgit From e2a280d28d32d2cf7eaa2b1cecefd079b24c0245 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 31 Jul 2019 01:40:42 +0900 Subject: lib/raid6: fix unnecessary rebuild of vpermxor*.c The following four files are every time rebuilt: UNROLL lib/raid6/vpermxor1.c UNROLL lib/raid6/vpermxor2.c UNROLL lib/raid6/vpermxor4.c UNROLL lib/raid6/vpermxor8.c Fix the suffixes in the targets. Fixes: 72ad21075df8 ("lib/raid6: refactor unroll rules with pattern rules") Signed-off-by: Masahiro Yamada --- lib/raid6/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/raid6/Makefile b/lib/raid6/Makefile index 42695bc8d451..0083b5cc646c 100644 --- a/lib/raid6/Makefile +++ b/lib/raid6/Makefile @@ -66,7 +66,7 @@ CFLAGS_vpermxor1.o += $(altivec_flags) CFLAGS_vpermxor2.o += $(altivec_flags) CFLAGS_vpermxor4.o += $(altivec_flags) CFLAGS_vpermxor8.o += $(altivec_flags) -targets += vpermxor1.o vpermxor2.o vpermxor4.o vpermxor8.o +targets += vpermxor1.c vpermxor2.c vpermxor4.c vpermxor8.c $(obj)/vpermxor%.c: $(src)/vpermxor.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) -- cgit From e8de12fb7cde2c85bc31097cd098da79a4818305 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 30 Jul 2019 09:48:03 -0700 Subject: kbuild: Check for unknown options with cc-option usage in Kconfig and clang If the particular version of clang a user has doesn't enable -Werror=unknown-warning-option by default, even though it is the default[1], then make sure to pass the option to the Kconfig cc-option command so that testing options from Kconfig files works properly. Otherwise, depending on the default values setup in the clang toolchain we will silently assume options such as -Wmaybe-uninitialized are supported by clang, when they really aren't. A compilation issue only started happening for me once commit 589834b3a009 ("kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS") was applied on top of commit b303c6df80c9 ("kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig"). This leads kbuild to try and test for the existence of the -Wmaybe-uninitialized flag with the cc-option command in scripts/Kconfig.include, and it doesn't see an error returned from the option test so it sets the config value to Y. Then the Makefile tries to pass the unknown option on the command line and -Werror=unknown-warning-option catches the invalid option and breaks the build. Before commit 589834b3a009 ("kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS") the build works fine, but any cc-option test of a warning option in Kconfig files silently evaluates to true, even if the warning option flag isn't supported on clang. Note: This doesn't change cc-option usages in Makefiles because those use a different rule that includes KBUILD_CFLAGS by default (see the __cc-option command in scripts/Kbuild.incluide). The KBUILD_CFLAGS variable already has the -Werror=unknown-warning-option flag set. Thanks to Doug for pointing out the different rule. [1] https://clang.llvm.org/docs/DiagnosticsReference.html#wunknown-warning-option Cc: Peter Smith Cc: Nick Desaulniers Cc: Douglas Anderson Signed-off-by: Stephen Boyd Reviewed-by: Nathan Chancellor Signed-off-by: Masahiro Yamada --- scripts/Kconfig.include | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/Kconfig.include b/scripts/Kconfig.include index 8a5c4d645eb1..4bbf4fc163a2 100644 --- a/scripts/Kconfig.include +++ b/scripts/Kconfig.include @@ -25,7 +25,7 @@ failure = $(if-success,$(1),n,y) # $(cc-option,) # Return y if the compiler supports , n otherwise -cc-option = $(success,$(CC) -Werror $(1) -E -x c /dev/null -o /dev/null) +cc-option = $(success,$(CC) -Werror $(CLANG_FLAGS) $(1) -E -x c /dev/null -o /dev/null) # $(ld-option,) # Return y if the linker supports , n otherwise -- cgit From 28fe79000e9b0a6f99959869947f1ca305f14599 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 31 Jul 2019 09:33:14 +0300 Subject: mlxsw: spectrum: Fix error path in mlxsw_sp_module_init() In case of sp2 pci driver registration fail, fix the error path to start with sp1 pci driver unregister. Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Signed-off-by: Jiri Pirko Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 650638152bbc..eda9c23e87b2 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -6330,7 +6330,7 @@ static int __init mlxsw_sp_module_init(void) return 0; err_sp2_pci_driver_register: - mlxsw_pci_driver_unregister(&mlxsw_sp2_pci_driver); + mlxsw_pci_driver_unregister(&mlxsw_sp1_pci_driver); err_sp1_pci_driver_register: mlxsw_core_driver_unregister(&mlxsw_sp2_driver); err_sp2_core_driver_register: -- cgit From 744ad9a357280d03d567538cee7e1e457dedd481 Mon Sep 17 00:00:00 2001 From: Petr Machata Date: Wed, 31 Jul 2019 09:33:15 +0300 Subject: mlxsw: spectrum_buffers: Further reduce pool size on Spectrum-2 In commit e891ce1dd2a5 ("mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2"), pool size was reduced to mitigate a problem in port buffer usage of ports split four ways. It turns out that this work around does not solve the issue, and a further reduction is required. Thus reduce the size of pool 0 by another 2.7 MiB, and round down to the whole number of cells. Fixes: e891ce1dd2a5 ("mlxsw: spectrum_buffers: Reduce pool size on Spectrum-2") Signed-off-by: Petr Machata Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c index 1537f70bc26d..888ba4300bcc 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c @@ -437,8 +437,8 @@ static const struct mlxsw_sp_sb_pr mlxsw_sp1_sb_prs[] = { MLXSW_SP1_SB_PR_CPU_SIZE, true, false), }; -#define MLXSW_SP2_SB_PR_INGRESS_SIZE 38128752 -#define MLXSW_SP2_SB_PR_EGRESS_SIZE 38128752 +#define MLXSW_SP2_SB_PR_INGRESS_SIZE 35297568 +#define MLXSW_SP2_SB_PR_EGRESS_SIZE 35297568 #define MLXSW_SP2_SB_PR_CPU_SIZE (256 * 1000) /* Order according to mlxsw_sp2_sb_pool_dess */ -- cgit From 5b31f3e39a6c4be55ede49da0dd352017f09e8cf Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 31 Jul 2019 09:38:19 +0300 Subject: drop_monitor: Add missing uAPI file to MAINTAINERS file Fixes: 6e43650cee64 ("add maintainer for network drop monitor kernel service") Signed-off-by: Ido Schimmel Acked-by: Neil Horman Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 9f5b8bd4faf9..b540794cbd91 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11137,6 +11137,7 @@ L: netdev@vger.kernel.org S: Maintained W: https://fedorahosted.org/dropwatch/ F: net/core/drop_monitor.c +F: include/uapi/linux/net_dropmon.h NETWORKING DRIVERS M: "David S. Miller" -- cgit From 3d0b63c5dfa8a912ac2d5026a24826b99b20ecc9 Mon Sep 17 00:00:00 2001 From: Denis Efremov Date: Wed, 31 Jul 2019 08:53:42 -0600 Subject: MAINTAINERS: floppy: take over maintainership I would like to maintain the floppy driver. After the recent fixes, I think I know the code pretty well. Nowadays I've got 2 physical 3.5" readers to test all the changes. Signed-off-by: Denis Efremov Acked-by: Will Deacon Signed-off-by: Jens Axboe --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 6426db5198f0..6c49b48cfd69 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6322,7 +6322,8 @@ F: Documentation/devicetree/bindings/counter/ftm-quaddec.txt F: drivers/counter/ftm-quaddec.c FLOPPY DRIVER -S: Orphan +M: Denis Efremov +S: Odd Fixes L: linux-block@vger.kernel.org F: drivers/block/floppy.c -- cgit From 47b69bf74f16b20a3bb95b1fe27e5347dd34b683 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Wed, 31 Jul 2019 09:38:42 +0200 Subject: net: ethernet: et131x: Use GFP_KERNEL instead of GFP_ATOMIC when allocating tx_ring->tcb_ring There is no good reason to use GFP_ATOMIC here. Other memory allocations are performed with GFP_KERNEL (see other 'dma_alloc_coherent()' below and 'kzalloc()' in 'et131x_rx_dma_memory_alloc()') Use GFP_KERNEL which should be enough. Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller --- drivers/net/ethernet/agere/et131x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/agere/et131x.c b/drivers/net/ethernet/agere/et131x.c index ea34bcb868b5..edbb4b3604c7 100644 --- a/drivers/net/ethernet/agere/et131x.c +++ b/drivers/net/ethernet/agere/et131x.c @@ -2362,7 +2362,7 @@ static int et131x_tx_dma_memory_alloc(struct et131x_adapter *adapter) /* Allocate memory for the TCB's (Transmit Control Block) */ tx_ring->tcb_ring = kcalloc(NUM_TCB, sizeof(struct tcb), - GFP_ATOMIC | GFP_DMA); + GFP_KERNEL | GFP_DMA); if (!tx_ring->tcb_ring) return -ENOMEM; -- cgit From 246902bdf562d45ea3475fac64c93048a7a39f01 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Wed, 31 Jul 2019 10:06:48 +0200 Subject: net: ag71xx: Use GFP_KERNEL instead of GFP_ATOMIC in 'ag71xx_rings_init()' There is no need to use GFP_ATOMIC here, GFP_KERNEL should be enough. The 'kcalloc()' just a few lines above, already uses GFP_KERNEL. Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/ag71xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/atheros/ag71xx.c b/drivers/net/ethernet/atheros/ag71xx.c index 8b69d0d7e726..6703960c7cf5 100644 --- a/drivers/net/ethernet/atheros/ag71xx.c +++ b/drivers/net/ethernet/atheros/ag71xx.c @@ -1141,7 +1141,7 @@ static int ag71xx_rings_init(struct ag71xx *ag) tx->descs_cpu = dma_alloc_coherent(&ag->pdev->dev, ring_size * AG71XX_DESC_SIZE, - &tx->descs_dma, GFP_ATOMIC); + &tx->descs_dma, GFP_KERNEL); if (!tx->descs_cpu) { kfree(tx->buf); tx->buf = NULL; -- cgit From c6349f8807324e270c5214920a1309481dd89ba4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 31 Jul 2019 15:12:02 +0200 Subject: net: mediatek: Drop unneeded dependency on NET_VENDOR_MEDIATEK The whole block is protected by "if NET_VENDOR_MEDIATEK", so there is no need for individual driver config symbols to duplicate this dependency. Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/mediatek/Kconfig b/drivers/net/ethernet/mediatek/Kconfig index 263cd0909fe0..1f7fff81f24d 100644 --- a/drivers/net/ethernet/mediatek/Kconfig +++ b/drivers/net/ethernet/mediatek/Kconfig @@ -9,7 +9,6 @@ if NET_VENDOR_MEDIATEK config NET_MEDIATEK_SOC tristate "MediaTek SoC Gigabit Ethernet support" - depends on NET_VENDOR_MEDIATEK select PHYLIB ---help--- This driver supports the gigabit ethernet MACs in the -- cgit From d8a1de3d5bb881507602bc02e004904828f88711 Mon Sep 17 00:00:00 2001 From: Juliana Rodrigueiro Date: Wed, 31 Jul 2019 15:17:23 +0200 Subject: isdn: hfcsusb: Fix mISDN driver crash caused by transfer buffer on the stack Since linux 4.9 it is not possible to use buffers on the stack for DMA transfers. During usb probe the driver crashes with "transfer buffer is on stack" message. This fix k-allocates a buffer to be used on "read_reg_atomic", which is a macro that calls "usb_control_msg" under the hood. Kernel 4.19 backtrace: usb_hcd_submit_urb+0x3e5/0x900 ? sched_clock+0x9/0x10 ? log_store+0x203/0x270 ? get_random_u32+0x6f/0x90 ? cache_alloc_refill+0x784/0x8a0 usb_submit_urb+0x3b4/0x550 usb_start_wait_urb+0x4e/0xd0 usb_control_msg+0xb8/0x120 hfcsusb_probe+0x6bc/0xb40 [hfcsusb] usb_probe_interface+0xc2/0x260 really_probe+0x176/0x280 driver_probe_device+0x49/0x130 __driver_attach+0xa9/0xb0 ? driver_probe_device+0x130/0x130 bus_for_each_dev+0x5a/0x90 driver_attach+0x14/0x20 ? driver_probe_device+0x130/0x130 bus_add_driver+0x157/0x1e0 driver_register+0x51/0xe0 usb_register_driver+0x5d/0x120 ? 0xf81ed000 hfcsusb_drv_init+0x17/0x1000 [hfcsusb] do_one_initcall+0x44/0x190 ? free_unref_page_commit+0x6a/0xd0 do_init_module+0x46/0x1c0 load_module+0x1dc1/0x2400 sys_init_module+0xed/0x120 do_fast_syscall_32+0x7a/0x200 entry_SYSENTER_32+0x6b/0xbe Signed-off-by: Juliana Rodrigueiro Signed-off-by: David S. Miller --- drivers/isdn/hardware/mISDN/hfcsusb.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c index 8fb7c5dea07f..008a74a1ed44 100644 --- a/drivers/isdn/hardware/mISDN/hfcsusb.c +++ b/drivers/isdn/hardware/mISDN/hfcsusb.c @@ -1693,13 +1693,23 @@ hfcsusb_stop_endpoint(struct hfcsusb *hw, int channel) static int setup_hfcsusb(struct hfcsusb *hw) { + void *dmabuf = kmalloc(sizeof(u_char), GFP_KERNEL); u_char b; + int ret; if (debug & DBG_HFC_CALL_TRACE) printk(KERN_DEBUG "%s: %s\n", hw->name, __func__); + if (!dmabuf) + return -ENOMEM; + + ret = read_reg_atomic(hw, HFCUSB_CHIP_ID, dmabuf); + + memcpy(&b, dmabuf, sizeof(u_char)); + kfree(dmabuf); + /* check the chip id */ - if (read_reg_atomic(hw, HFCUSB_CHIP_ID, &b) != 1) { + if (ret != 1) { printk(KERN_DEBUG "%s: %s: cannot read chip id\n", hw->name, __func__); return 1; -- cgit From c2c44ec20a8496f7a3b3401c092afe96908eced1 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 27 Jul 2019 08:29:57 -0400 Subject: Unbreak mount_capable() In "consolidate the capability checks in sget_{fc,userns}())" the wrong argument had been passed to mount_capable() by sget_fc(). That mistake had been further obscured later, when switching mount_capable() to fs_context has moved the calculation of bogus argument from sget_fc() to mount_capable() itself. It should've been fc->user_ns all along. Screwed-up-by: Al Viro Reported-by: Christian Brauner Tested-by: Christian Brauner Reviewed-by: David Howells Signed-off-by: Al Viro --- fs/super.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/fs/super.c b/fs/super.c index 113c58f19425..5960578a4076 100644 --- a/fs/super.c +++ b/fs/super.c @@ -478,13 +478,10 @@ EXPORT_SYMBOL(generic_shutdown_super); bool mount_capable(struct fs_context *fc) { - struct user_namespace *user_ns = fc->global ? &init_user_ns - : fc->user_ns; - if (!(fc->fs_type->fs_flags & FS_USERNS_MOUNT)) return capable(CAP_SYS_ADMIN); else - return ns_capable(user_ns, CAP_SYS_ADMIN); + return ns_capable(fc->user_ns, CAP_SYS_ADMIN); } /** -- cgit From 706cb5492c8c459199fa0ab3b5fd2ba54ee53b0c Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Sat, 27 Jul 2019 17:12:54 +0200 Subject: gfs2: Inode dirtying fix With the recent iomap write page reclaim deadlock fix, it turns out that the GLF_DIRTY flag isn't always set when it needs to be anymore: previously, this happened as a side effect of always adding the inode buffer head to the current transaction with gfs2_trans_add_meta, but this isn't happening consistently anymore. Fix by removing an additional unnecessary gfs2_trans_add_meta call and by setting the GLF_DIRTY flag in gfs2_iomap_end. (The GLF_DIRTY flag causes inode_go_sync to flush the transaction log when syncing out the glock of that inode. When the flag isn't set, inode_go_sync will skip inodes, including ones with an i_state of I_DIRTY_PAGES, which will lead to cluster incoherency.) In addition, in gfs2_iomap_page_done, if the metadata has changed, mark the inode as I_DIRTY_DATASYNC to have the inode added to the current transaction: we don't expect metadata to change here, but let's err on the safe side. Fixes: d0a22a4b03b8 ("gfs2: Fix iomap write page reclaim deadlock"); Signed-off-by: Andreas Gruenbacher --- fs/gfs2/bmap.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c index 79581b9bdebb..4df26ef2b2b1 100644 --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -1002,11 +1002,16 @@ static void gfs2_iomap_page_done(struct inode *inode, loff_t pos, unsigned copied, struct page *page, struct iomap *iomap) { + struct gfs2_trans *tr = current->journal_info; struct gfs2_inode *ip = GFS2_I(inode); struct gfs2_sbd *sdp = GFS2_SB(inode); if (page && !gfs2_is_stuffed(ip)) gfs2_page_add_databufs(ip, page, offset_in_page(pos), copied); + + if (tr->tr_num_buf_new) + __mark_inode_dirty(inode, I_DIRTY_DATASYNC); + gfs2_trans_end(sdp); } @@ -1099,8 +1104,6 @@ static int gfs2_iomap_begin_write(struct inode *inode, loff_t pos, tr = current->journal_info; if (tr->tr_num_buf_new) __mark_inode_dirty(inode, I_DIRTY_DATASYNC); - else - gfs2_trans_add_meta(ip->i_gl, mp->mp_bh[0]); gfs2_trans_end(sdp); } @@ -1181,10 +1184,16 @@ static int gfs2_iomap_end(struct inode *inode, loff_t pos, loff_t length, if (ip->i_qadata && ip->i_qadata->qa_qd_num) gfs2_quota_unlock(ip); + + if (unlikely(!written)) + goto out_unlock; + if (iomap->flags & IOMAP_F_SIZE_CHANGED) mark_inode_dirty(inode); - gfs2_write_unlock(inode); + set_bit(GLF_DIRTY, &ip->i_gl->gl_flags); +out_unlock: + gfs2_write_unlock(inode); out: return 0; } -- cgit From a22c5cf5d37ddcd4d2dd98ee9cf04fa5dd1e1c01 Mon Sep 17 00:00:00 2001 From: Vincenzo Frascino Date: Mon, 29 Jul 2019 13:54:21 +0100 Subject: arm64: vdso: Fix Makefile regression Using an old .config in combination with "make oldconfig" can cause an incorrect detection of the compat compiler: $ grep CROSS_COMPILE_COMPAT .config CONFIG_CROSS_COMPILE_COMPAT_VDSO="" $ make oldconfig && make arch/arm64/Makefile:58: gcc not found, check CROSS_COMPILE_COMPAT. Stop. Accordingly to the section 7.2 of the GNU Make manual "Syntax of Conditionals", "When the value results from complex expansions of variables and functions, expansions you would consider empty may actually contain whitespace characters and thus are not seen as empty. However, you can use the strip function to avoid interpreting whitespace as a non-empty value." Fix the issue adding strip to the CROSS_COMPILE_COMPAT string evaluation. Reported-by: Matteo Croce Tested-by: Matteo Croce Acked-by: Will Deacon Signed-off-by: Vincenzo Frascino Signed-off-by: Catalin Marinas --- arch/arm64/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index bb1f1dbb34e8..61de992bbea3 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -52,7 +52,7 @@ ifeq ($(CONFIG_GENERIC_COMPAT_VDSO), y) ifeq ($(CONFIG_CC_IS_CLANG), y) $(warning CROSS_COMPILE_COMPAT is clang, the compat vDSO will not be built) - else ifeq ($(CROSS_COMPILE_COMPAT),) + else ifeq ($(strip $(CROSS_COMPILE_COMPAT)),) $(warning CROSS_COMPILE_COMPAT not defined or empty, the compat vDSO will not be built) else ifeq ($(shell which $(CROSS_COMPILE_COMPAT)gcc 2> /dev/null),) $(error $(CROSS_COMPILE_COMPAT)gcc not found, check CROSS_COMPILE_COMPAT) -- cgit From 147b9635e6347104b91f48ca9dca61eb0fbf2a54 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 30 Jul 2019 15:40:20 +0100 Subject: arm64: cpufeature: Fix feature comparison for CTR_EL0.{CWG,ERG} If CTR_EL0.{CWG,ERG} are 0b0000 then they must be interpreted to have their architecturally maximum values, which defeats the use of FTR_HIGHER_SAFE when sanitising CPU ID registers on heterogeneous machines. Introduce FTR_HIGHER_OR_ZERO_SAFE so that these fields effectively saturate at zero. Fixes: 3c739b571084 ("arm64: Keep track of CPU feature registers") Cc: # 4.4.x- Reviewed-by: Suzuki K Poulose Acked-by: Mark Rutland Signed-off-by: Will Deacon Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/cpufeature.h | 7 ++++--- arch/arm64/kernel/cpufeature.c | 8 ++++++-- 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index 407e2bf23676..c96ffa4722d3 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -35,9 +35,10 @@ */ enum ftr_type { - FTR_EXACT, /* Use a predefined safe value */ - FTR_LOWER_SAFE, /* Smaller value is safe */ - FTR_HIGHER_SAFE,/* Bigger value is safe */ + FTR_EXACT, /* Use a predefined safe value */ + FTR_LOWER_SAFE, /* Smaller value is safe */ + FTR_HIGHER_SAFE, /* Bigger value is safe */ + FTR_HIGHER_OR_ZERO_SAFE, /* Bigger value is safe, but 0 is biggest */ }; #define FTR_STRICT true /* SANITY check strict matching required */ diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index f29f36a65175..d19d14ba9ae4 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -225,8 +225,8 @@ static const struct arm64_ftr_bits ftr_ctr[] = { ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, 31, 1, 1), /* RES1 */ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_DIC_SHIFT, 1, 1), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_IDC_SHIFT, 1, 1), - ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_SAFE, CTR_CWG_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_SAFE, CTR_ERG_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_OR_ZERO_SAFE, CTR_CWG_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_OR_ZERO_SAFE, CTR_ERG_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_DMINLINE_SHIFT, 4, 1), /* * Linux can handle differing I-cache policies. Userspace JITs will @@ -468,6 +468,10 @@ static s64 arm64_ftr_safe_value(const struct arm64_ftr_bits *ftrp, s64 new, case FTR_LOWER_SAFE: ret = new < cur ? new : cur; break; + case FTR_HIGHER_OR_ZERO_SAFE: + if (!cur || !new) + break; + /* Fallthrough */ case FTR_HIGHER_SAFE: ret = new > cur ? new : cur; break; -- cgit From f1d4836201543e88ebe70237e67938168d5fab19 Mon Sep 17 00:00:00 2001 From: Qian Cai Date: Tue, 30 Jul 2019 17:23:48 -0400 Subject: arm64/efi: fix variable 'si' set but not used GCC throws out this warning on arm64. drivers/firmware/efi/libstub/arm-stub.c: In function 'efi_entry': drivers/firmware/efi/libstub/arm-stub.c:132:22: warning: variable 'si' set but not used [-Wunused-but-set-variable] Fix it by making free_screen_info() a static inline function. Acked-by: Will Deacon Signed-off-by: Qian Cai Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/efi.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h index 8e79ce9c3f5c..76a144702586 100644 --- a/arch/arm64/include/asm/efi.h +++ b/arch/arm64/include/asm/efi.h @@ -105,7 +105,11 @@ static inline unsigned long efi_get_max_initrd_addr(unsigned long dram_base, ((protocol##_t *)instance)->f(instance, ##__VA_ARGS__) #define alloc_screen_info(x...) &screen_info -#define free_screen_info(x...) + +static inline void free_screen_info(efi_system_table_t *sys_table_arg, + struct screen_info *si) +{ +} /* redeclare as 'hidden' so the compiler will generate relative references */ extern struct screen_info screen_info __attribute__((__visibility__("hidden"))); -- cgit From 7e9e5ead55beacc11116b3fb90b0de6e7cf55a69 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 17 Jul 2019 14:15:37 -0700 Subject: drm/vgem: fix cache synchronization on arm/arm64 drm_cflush_pages() is no-op on arm/arm64. But instead we can use dma_sync API. Fixes failures w/ vgem_test. Acked-by: Daniel Vetter Signed-off-by: Rob Clark Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20190717211542.30482-1-robdclark@gmail.com --- drivers/gpu/drm/vgem/vgem_drv.c | 130 +++++++++++++++++++++++++--------------- 1 file changed, 83 insertions(+), 47 deletions(-) diff --git a/drivers/gpu/drm/vgem/vgem_drv.c b/drivers/gpu/drm/vgem/vgem_drv.c index 11a8f99ba18c..fc04803ff403 100644 --- a/drivers/gpu/drm/vgem/vgem_drv.c +++ b/drivers/gpu/drm/vgem/vgem_drv.c @@ -47,10 +47,16 @@ static struct vgem_device { struct platform_device *platform; } *vgem_device; +static void sync_and_unpin(struct drm_vgem_gem_object *bo); +static struct page **pin_and_sync(struct drm_vgem_gem_object *bo); + static void vgem_gem_free_object(struct drm_gem_object *obj) { struct drm_vgem_gem_object *vgem_obj = to_vgem_bo(obj); + if (!obj->import_attach) + sync_and_unpin(vgem_obj); + kvfree(vgem_obj->pages); mutex_destroy(&vgem_obj->pages_lock); @@ -78,40 +84,15 @@ static vm_fault_t vgem_gem_fault(struct vm_fault *vmf) return VM_FAULT_SIGBUS; mutex_lock(&obj->pages_lock); + if (!obj->pages) + pin_and_sync(obj); if (obj->pages) { get_page(obj->pages[page_offset]); vmf->page = obj->pages[page_offset]; ret = 0; } mutex_unlock(&obj->pages_lock); - if (ret) { - struct page *page; - - page = shmem_read_mapping_page( - file_inode(obj->base.filp)->i_mapping, - page_offset); - if (!IS_ERR(page)) { - vmf->page = page; - ret = 0; - } else switch (PTR_ERR(page)) { - case -ENOSPC: - case -ENOMEM: - ret = VM_FAULT_OOM; - break; - case -EBUSY: - ret = VM_FAULT_RETRY; - break; - case -EFAULT: - case -EINVAL: - ret = VM_FAULT_SIGBUS; - break; - default: - WARN_ON(PTR_ERR(page)); - ret = VM_FAULT_SIGBUS; - break; - } - } return ret; } @@ -277,32 +258,93 @@ static const struct file_operations vgem_driver_fops = { .release = drm_release, }; -static struct page **vgem_pin_pages(struct drm_vgem_gem_object *bo) +/* Called under pages_lock, except in free path (where it can't race): */ +static void sync_and_unpin(struct drm_vgem_gem_object *bo) { - mutex_lock(&bo->pages_lock); - if (bo->pages_pin_count++ == 0) { - struct page **pages; + struct drm_device *dev = bo->base.dev; + + if (bo->table) { + dma_sync_sg_for_cpu(dev->dev, bo->table->sgl, + bo->table->nents, DMA_BIDIRECTIONAL); + sg_free_table(bo->table); + kfree(bo->table); + bo->table = NULL; + } + + if (bo->pages) { + drm_gem_put_pages(&bo->base, bo->pages, true, true); + bo->pages = NULL; + } +} + +static struct page **pin_and_sync(struct drm_vgem_gem_object *bo) +{ + struct drm_device *dev = bo->base.dev; + int npages = bo->base.size >> PAGE_SHIFT; + struct page **pages; + struct sg_table *sgt; + + WARN_ON(!mutex_is_locked(&bo->pages_lock)); + + pages = drm_gem_get_pages(&bo->base); + if (IS_ERR(pages)) { + bo->pages_pin_count--; + mutex_unlock(&bo->pages_lock); + return pages; + } - pages = drm_gem_get_pages(&bo->base); - if (IS_ERR(pages)) { - bo->pages_pin_count--; - mutex_unlock(&bo->pages_lock); - return pages; - } + sgt = drm_prime_pages_to_sg(pages, npages); + if (IS_ERR(sgt)) { + dev_err(dev->dev, + "failed to allocate sgt: %ld\n", + PTR_ERR(bo->table)); + drm_gem_put_pages(&bo->base, pages, false, false); + mutex_unlock(&bo->pages_lock); + return ERR_CAST(bo->table); + } + + /* + * Flush the object from the CPU cache so that importers + * can rely on coherent indirect access via the exported + * dma-address. + */ + dma_sync_sg_for_device(dev->dev, sgt->sgl, + sgt->nents, DMA_BIDIRECTIONAL); + + bo->pages = pages; + bo->table = sgt; + + return pages; +} + +static struct page **vgem_pin_pages(struct drm_vgem_gem_object *bo) +{ + struct page **pages; - bo->pages = pages; + mutex_lock(&bo->pages_lock); + if (bo->pages_pin_count++ == 0 && !bo->pages) { + pages = pin_and_sync(bo); + } else { + WARN_ON(!bo->pages); + pages = bo->pages; } mutex_unlock(&bo->pages_lock); - return bo->pages; + return pages; } static void vgem_unpin_pages(struct drm_vgem_gem_object *bo) { + /* + * We shouldn't hit this for imported bo's.. in the import + * case we don't own the scatter-table + */ + WARN_ON(bo->base.import_attach); + mutex_lock(&bo->pages_lock); if (--bo->pages_pin_count == 0) { - drm_gem_put_pages(&bo->base, bo->pages, true, true); - bo->pages = NULL; + WARN_ON(!bo->table); + sync_and_unpin(bo); } mutex_unlock(&bo->pages_lock); } @@ -310,18 +352,12 @@ static void vgem_unpin_pages(struct drm_vgem_gem_object *bo) static int vgem_prime_pin(struct drm_gem_object *obj) { struct drm_vgem_gem_object *bo = to_vgem_bo(obj); - long n_pages = obj->size >> PAGE_SHIFT; struct page **pages; pages = vgem_pin_pages(bo); if (IS_ERR(pages)) return PTR_ERR(pages); - /* Flush the object from the CPU cache so that importers can rely - * on coherent indirect access via the exported dma-address. - */ - drm_clflush_pages(pages, n_pages); - return 0; } -- cgit From b399abe7c21e248dc6224cadc9a378a2beb10cfd Mon Sep 17 00:00:00 2001 From: Mao Han Date: Thu, 11 Jul 2019 10:38:40 +0800 Subject: riscv: Fix perf record without libelf support This patch fix following perf record error by linking vdso.so with build id. perf.data perf.data.old [ perf record: Woken up 1 times to write data ] free(): double free detected in tcache 2 Aborted perf record use filename__read_build_id(util/symbol-minimal.c) to get build id when libelf is not supported. When vdso.so is linked without build id, the section size of PT_NOTE will be zero, buf size will realloc to zero and cause memory corruption. Signed-off-by: Mao Han Cc: Paul Walmsley Cc: Palmer Dabbelt Cc: Albert Ou Signed-off-by: Paul Walmsley --- arch/riscv/kernel/vdso/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile index f1d6ffe43e42..49a5852fd07d 100644 --- a/arch/riscv/kernel/vdso/Makefile +++ b/arch/riscv/kernel/vdso/Makefile @@ -37,7 +37,7 @@ $(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso) FORCE # these symbols in the kernel code rather than hand-coded addresses. SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \ - -Wl,--hash-style=both + -Wl,--build-id -Wl,--hash-style=both $(obj)/vdso-dummy.o: $(src)/vdso.lds $(obj)/rt_sigreturn.o FORCE $(call if_changed,vdsold) -- cgit From 11ae2d892139a1086f257188d457ddcb71ab5257 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 25 Jul 2019 13:41:31 -0700 Subject: riscv: dts: fu540-c000: drop "timebase-frequency" On FU540-based systems, the "timebase-frequency" (RTCCLK) is sourced from an external crystal located on the PCB. Thus the timebase-frequency DT property should be defined by the board that uses the SoC, not the SoC itself. Drop the superfluous timebase-frequency property from the SoC DT data. (It's already present in the board DT data.) Signed-off-by: Paul Walmsley Reviewed-by: Bin Meng --- arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi index 9bf63f0ab253..42b5ec223100 100644 --- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi +++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi @@ -21,7 +21,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - timebase-frequency = <1000000>; cpu0: cpu@0 { compatible = "sifive,e51", "sifive,rocket0", "riscv"; device_type = "cpu"; -- cgit From b7edabfe843805b7ab8a91396b0782042a289308 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 25 Jul 2019 15:05:59 -0700 Subject: riscv: defconfig: align RV64 defconfig to the output of "make savedefconfig" Align the RV64 defconfig to the output of "make savedefconfig" to avoid unnecessary deltas for future defconfig patches. This patch should have no runtime functional impact. Signed-off-by: Paul Walmsley Reviewed-by: Bin Meng --- arch/riscv/configs/defconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig index b7b749b18853..93205c0bf71d 100644 --- a/arch/riscv/configs/defconfig +++ b/arch/riscv/configs/defconfig @@ -34,6 +34,7 @@ CONFIG_PCIEPORTBUS=y CONFIG_PCI_HOST_GENERIC=y CONFIG_PCIE_XILINX=y CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_BLK_DEV_LOOP=y CONFIG_VIRTIO_BLK=y CONFIG_BLK_DEV_SD=y @@ -53,6 +54,8 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_EARLYCON_RISCV_SBI=y CONFIG_HVC_RISCV_SBI=y +CONFIG_SPI=y +CONFIG_SPI_SIFIVE=y # CONFIG_PTP_1588_CLOCK is not set CONFIG_DRM=y CONFIG_DRM_RADEON=y @@ -66,8 +69,9 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_STORAGE=y CONFIG_USB_UAS=y +CONFIG_MMC=y +CONFIG_MMC_SPI=y CONFIG_VIRTIO_MMIO=y -CONFIG_SPI_SIFIVE=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_AUTOFS4_FS=y @@ -83,8 +87,4 @@ CONFIG_ROOT_NFS=y CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_DEV_VIRTIO=y CONFIG_PRINTK_TIME=y -CONFIG_SPI=y -CONFIG_MMC_SPI=y -CONFIG_MMC=y -CONFIG_DEVTMPFS_MOUNT=y # CONFIG_RCU_TRACE is not set -- cgit From 1b7e816fc80e668f0ccc8542cec20b9259abace1 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Wed, 31 Jul 2019 15:32:40 -0400 Subject: mm: slub: Fix slab walking for init_on_free To properly clear the slab on free with slab_want_init_on_free, we walk the list of free objects using get_freepointer/set_freepointer. The value we get from get_freepointer may not be valid. This isn't an issue since an actual value will get written later but this means there's a chance of triggering a bug if we use this value with set_freepointer: kernel BUG at mm/slub.c:306! invalid opcode: 0000 [#1] PREEMPT PTI CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-05754-g6471384a #4 RIP: 0010:kfree+0x58a/0x5c0 Code: 48 83 05 78 37 51 02 01 0f 0b 48 83 05 7e 37 51 02 01 48 83 05 7e 37 51 02 01 48 83 05 7e 37 51 02 01 48 83 05 d6 37 51 02 01 <0f> 0b 48 83 05 d4 37 51 02 01 48 83 05 d4 37 51 02 01 48 83 05 d4 RSP: 0000:ffffffff82603d90 EFLAGS: 00010002 RAX: ffff8c3976c04320 RBX: ffff8c3976c04300 RCX: 0000000000000000 RDX: ffff8c3976c04300 RSI: 0000000000000000 RDI: ffff8c3976c04320 RBP: ffffffff82603db8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8c3976c04320 R11: ffffffff8289e1e0 R12: ffffd52cc8db0100 R13: ffff8c3976c01a00 R14: ffffffff810f10d4 R15: ffff8c3976c04300 FS: 0000000000000000(0000) GS:ffffffff8266b000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8c397ffff000 CR3: 0000000125020000 CR4: 00000000000406b0 Call Trace: apply_wqattrs_prepare+0x154/0x280 apply_workqueue_attrs_locked+0x4e/0xe0 apply_workqueue_attrs+0x36/0x60 alloc_workqueue+0x25a/0x6d0 workqueue_init_early+0x246/0x348 start_kernel+0x3c7/0x7ec x86_64_start_reservations+0x40/0x49 x86_64_start_kernel+0xda/0xe4 secondary_startup_64+0xb6/0xc0 Modules linked in: ---[ end trace f67eb9af4d8d492b ]--- Fix this by ensuring the value we set with set_freepointer is either NULL or another value in the chain. Reported-by: kernel test robot Signed-off-by: Laura Abbott Fixes: 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options") Reviewed-by: Kees Cook Signed-off-by: Linus Torvalds --- mm/slub.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/mm/slub.c b/mm/slub.c index e6c030e47364..8834563cdb4b 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1432,7 +1432,9 @@ static inline bool slab_free_freelist_hook(struct kmem_cache *s, void *old_tail = *tail ? *tail : *head; int rsize; - if (slab_want_init_on_free(s)) + if (slab_want_init_on_free(s)) { + void *p = NULL; + do { object = next; next = get_freepointer(s, object); @@ -1445,8 +1447,10 @@ static inline bool slab_free_freelist_hook(struct kmem_cache *s, : 0; memset((char *)object + s->inuse, 0, s->size - s->inuse - rsize); - set_freepointer(s, object, next); + set_freepointer(s, object, p); + p = object; } while (object != old_tail); + } /* * Compiler cannot detect this function can be removed if slab_free_hook() -- cgit From b36a1552d7319bbfd5cf7f08726c23c5c66d4f73 Mon Sep 17 00:00:00 2001 From: Vladis Dronov Date: Tue, 30 Jul 2019 11:33:45 +0200 Subject: Bluetooth: hci_uart: check for missing tty operations Certain ttys operations (pty_unix98_ops) lack tiocmget() and tiocmset() functions which are called by the certain HCI UART protocols (hci_ath, hci_bcm, hci_intel, hci_mrvl, hci_qca) via hci_uart_set_flow_control() or directly. This leads to an execution at NULL and can be triggered by an unprivileged user. Fix this by adding a helper function and a check for the missing tty operations in the protocols code. This fixes CVE-2019-10207. The Fixes: lines list commits where calls to tiocm[gs]et() or hci_uart_set_flow_control() were added to the HCI UART protocols. Link: https://syzkaller.appspot.com/bug?id=1b42faa2848963564a5b1b7f8c837ea7b55ffa50 Reported-by: syzbot+79337b501d6aa974d0f6@syzkaller.appspotmail.com Cc: stable@vger.kernel.org # v2.6.36+ Fixes: b3190df62861 ("Bluetooth: Support for Atheros AR300x serial chip") Fixes: 118612fb9165 ("Bluetooth: hci_bcm: Add suspend/resume PM functions") Fixes: ff2895592f0f ("Bluetooth: hci_intel: Add Intel baudrate configuration support") Fixes: 162f812f23ba ("Bluetooth: hci_uart: Add Marvell support") Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990") Signed-off-by: Vladis Dronov Signed-off-by: Marcel Holtmann Reviewed-by: Yu-Chen, Cho Tested-by: Yu-Chen, Cho Signed-off-by: Linus Torvalds --- drivers/bluetooth/hci_ath.c | 3 +++ drivers/bluetooth/hci_bcm.c | 3 +++ drivers/bluetooth/hci_intel.c | 3 +++ drivers/bluetooth/hci_ldisc.c | 13 +++++++++++++ drivers/bluetooth/hci_mrvl.c | 3 +++ drivers/bluetooth/hci_qca.c | 3 +++ drivers/bluetooth/hci_uart.h | 1 + 7 files changed, 29 insertions(+) diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c index a55be205b91a..dbfe34664633 100644 --- a/drivers/bluetooth/hci_ath.c +++ b/drivers/bluetooth/hci_ath.c @@ -98,6 +98,9 @@ static int ath_open(struct hci_uart *hu) BT_DBG("hu %p", hu); + if (!hci_uart_has_flow_control(hu)) + return -EOPNOTSUPP; + ath = kzalloc(sizeof(*ath), GFP_KERNEL); if (!ath) return -ENOMEM; diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c index 8905ad2edde7..ae2624fce913 100644 --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c @@ -406,6 +406,9 @@ static int bcm_open(struct hci_uart *hu) bt_dev_dbg(hu->hdev, "hu %p", hu); + if (!hci_uart_has_flow_control(hu)) + return -EOPNOTSUPP; + bcm = kzalloc(sizeof(*bcm), GFP_KERNEL); if (!bcm) return -ENOMEM; diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c index 207bae5e0d46..31f25153087d 100644 --- a/drivers/bluetooth/hci_intel.c +++ b/drivers/bluetooth/hci_intel.c @@ -391,6 +391,9 @@ static int intel_open(struct hci_uart *hu) BT_DBG("hu %p", hu); + if (!hci_uart_has_flow_control(hu)) + return -EOPNOTSUPP; + intel = kzalloc(sizeof(*intel), GFP_KERNEL); if (!intel) return -ENOMEM; diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 8950e07889fe..85a30fb9177b 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -292,6 +292,19 @@ static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb) return 0; } +/* Check the underlying device or tty has flow control support */ +bool hci_uart_has_flow_control(struct hci_uart *hu) +{ + /* serdev nodes check if the needed operations are present */ + if (hu->serdev) + return true; + + if (hu->tty->driver->ops->tiocmget && hu->tty->driver->ops->tiocmset) + return true; + + return false; +} + /* Flow control or un-flow control the device */ void hci_uart_set_flow_control(struct hci_uart *hu, bool enable) { diff --git a/drivers/bluetooth/hci_mrvl.c b/drivers/bluetooth/hci_mrvl.c index f98e5cc343b2..fbc3f7c3a5c7 100644 --- a/drivers/bluetooth/hci_mrvl.c +++ b/drivers/bluetooth/hci_mrvl.c @@ -59,6 +59,9 @@ static int mrvl_open(struct hci_uart *hu) BT_DBG("hu %p", hu); + if (!hci_uart_has_flow_control(hu)) + return -EOPNOTSUPP; + mrvl = kzalloc(sizeof(*mrvl), GFP_KERNEL); if (!mrvl) return -ENOMEM; diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index 9a5c9c1f9484..82a0a3691a63 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -473,6 +473,9 @@ static int qca_open(struct hci_uart *hu) BT_DBG("hu %p qca_open", hu); + if (!hci_uart_has_flow_control(hu)) + return -EOPNOTSUPP; + qca = kzalloc(sizeof(struct qca_data), GFP_KERNEL); if (!qca) return -ENOMEM; diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h index f11af3912ce6..6ab631101019 100644 --- a/drivers/bluetooth/hci_uart.h +++ b/drivers/bluetooth/hci_uart.h @@ -104,6 +104,7 @@ int hci_uart_wait_until_sent(struct hci_uart *hu); int hci_uart_init_ready(struct hci_uart *hu); void hci_uart_init_work(struct work_struct *work); void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed); +bool hci_uart_has_flow_control(struct hci_uart *hu); void hci_uart_set_flow_control(struct hci_uart *hu, bool enable); void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed, unsigned int oper_speed); -- cgit From 3de433c5b38af49a5fc7602721e2ab5d39f1e69c Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 30 Jul 2019 14:46:28 -0700 Subject: drm/msm: Use the correct dma_sync calls in msm_gem [subject was: drm/msm: shake fist angrily at dma-mapping] So, using dma_sync_* for our cache needs works out w/ dma iommu ops, but it falls appart with dma direct ops. The problem is that, depending on display generation, we can have either set of dma ops (mdp4 and dpu have iommu wired to mdss node, which maps to toplevel drm device, but mdp5 has iommu wired up to the mdp sub-node within mdss). Fixes this splat on mdp5 devices: Unable to handle kernel paging request at virtual address ffffffff80000000 Mem abort info: ESR = 0x96000144 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000144 CM = 1, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000810e4000 [ffffffff80000000] pgd=0000000000000000 Internal error: Oops: 96000144 [#1] SMP Modules linked in: btqcomsmd btqca bluetooth cfg80211 ecdh_generic ecc rfkill libarc4 panel_simple msm wcnss_ctrl qrtr_smd drm_kms_helper venus_enc venus_dec videobuf2_dma_sg videobuf2_memops drm venus_core ipv6 qrtr qcom_wcnss_pil v4l2_mem2mem qcom_sysmon videobuf2_v4l2 qmi_helpers videobuf2_common crct10dif_ce mdt_loader qcom_common videodev qcom_glink_smem remoteproc bmc150_accel_i2c bmc150_magn_i2c bmc150_accel_core bmc150_magn snd_soc_lpass_apq8016 snd_soc_msm8916_analog mms114 mc nf_defrag_ipv6 snd_soc_lpass_cpu snd_soc_apq8016_sbc industrialio_triggered_buffer kfifo_buf snd_soc_lpass_platform snd_soc_msm8916_digital drm_panel_orientation_quirks CPU: 2 PID: 33 Comm: kworker/2:1 Not tainted 5.3.0-rc2 #1 Hardware name: Samsung Galaxy A5U (EUR) (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : __clean_dcache_area_poc+0x20/0x38 lr : arch_sync_dma_for_device+0x28/0x30 sp : ffff0000115736a0 x29: ffff0000115736a0 x28: 0000000000000001 x27: ffff800074830800 x26: ffff000011478000 x25: 0000000000000000 x24: 0000000000000001 x23: ffff000011478a98 x22: ffff800009fd1c10 x21: 0000000000000001 x20: ffff800075ad0a00 x19: 0000000000000000 x18: ffff0000112b2000 x17: 0000000000000000 x16: 0000000000000000 x15: 00000000fffffff0 x14: ffff000011455d70 x13: 0000000000000000 x12: 0000000000000028 x11: 0000000000000001 x10: ffff00001106c000 x9 : ffff7e0001d6b380 x8 : 0000000000001000 x7 : ffff7e0001d6b380 x6 : ffff7e0001d6b382 x5 : 0000000000000000 x4 : 0000000000001000 x3 : 000000000000003f x2 : 0000000000000040 x1 : ffffffff80001000 x0 : ffffffff80000000 Call trace: __clean_dcache_area_poc+0x20/0x38 dma_direct_sync_sg_for_device+0xb8/0xe8 get_pages+0x22c/0x250 [msm] msm_gem_get_and_pin_iova+0xdc/0x168 [msm] ... Fixes the combination of two patches: Fixes: 0036bc73ccbe (drm/msm: stop abusing dma_map/unmap for cache) Fixes: 449fa54d6815 (dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device) Tested-by: Stephan Gerhold Signed-off-by: Rob Clark [seanpaul changed subject to something more desriptive] Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20190730214633.17820-1-robdclark@gmail.com --- drivers/gpu/drm/msm/msm_gem.c | 47 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 42 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c index c2114c748c2f..8cf6362e64bf 100644 --- a/drivers/gpu/drm/msm/msm_gem.c +++ b/drivers/gpu/drm/msm/msm_gem.c @@ -32,6 +32,46 @@ static bool use_pages(struct drm_gem_object *obj) return !msm_obj->vram_node; } +/* + * Cache sync.. this is a bit over-complicated, to fit dma-mapping + * API. Really GPU cache is out of scope here (handled on cmdstream) + * and all we need to do is invalidate newly allocated pages before + * mapping to CPU as uncached/writecombine. + * + * On top of this, we have the added headache, that depending on + * display generation, the display's iommu may be wired up to either + * the toplevel drm device (mdss), or to the mdp sub-node, meaning + * that here we either have dma-direct or iommu ops. + * + * Let this be a cautionary tail of abstraction gone wrong. + */ + +static void sync_for_device(struct msm_gem_object *msm_obj) +{ + struct device *dev = msm_obj->base.dev->dev; + + if (get_dma_ops(dev)) { + dma_sync_sg_for_device(dev, msm_obj->sgt->sgl, + msm_obj->sgt->nents, DMA_BIDIRECTIONAL); + } else { + dma_map_sg(dev, msm_obj->sgt->sgl, + msm_obj->sgt->nents, DMA_BIDIRECTIONAL); + } +} + +static void sync_for_cpu(struct msm_gem_object *msm_obj) +{ + struct device *dev = msm_obj->base.dev->dev; + + if (get_dma_ops(dev)) { + dma_sync_sg_for_cpu(dev, msm_obj->sgt->sgl, + msm_obj->sgt->nents, DMA_BIDIRECTIONAL); + } else { + dma_unmap_sg(dev, msm_obj->sgt->sgl, + msm_obj->sgt->nents, DMA_BIDIRECTIONAL); + } +} + /* allocate pages from VRAM carveout, used when no IOMMU: */ static struct page **get_pages_vram(struct drm_gem_object *obj, int npages) { @@ -97,8 +137,7 @@ static struct page **get_pages(struct drm_gem_object *obj) * because display controller, GPU, etc. are not coherent: */ if (msm_obj->flags & (MSM_BO_WC|MSM_BO_UNCACHED)) - dma_sync_sg_for_device(dev->dev, msm_obj->sgt->sgl, - msm_obj->sgt->nents, DMA_BIDIRECTIONAL); + sync_for_device(msm_obj); } return msm_obj->pages; @@ -127,9 +166,7 @@ static void put_pages(struct drm_gem_object *obj) * GPU, etc. are not coherent: */ if (msm_obj->flags & (MSM_BO_WC|MSM_BO_UNCACHED)) - dma_sync_sg_for_cpu(obj->dev->dev, msm_obj->sgt->sgl, - msm_obj->sgt->nents, - DMA_BIDIRECTIONAL); + sync_for_cpu(msm_obj); sg_free_table(msm_obj->sgt); kfree(msm_obj->sgt); -- cgit From 45385237f65aeee73641f1ef737d7273905a233f Mon Sep 17 00:00:00 2001 From: Ondrej Mosnacek Date: Thu, 25 Jul 2019 12:52:43 +0200 Subject: selinux: fix memory leak in policydb_init() Since roles_init() adds some entries to the role hash table, we need to destroy also its keys/values on error, otherwise we get a memory leak in the error path. Cc: Reported-by: syzbot+fee3a14d4cdf92646287@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ondrej Mosnacek Signed-off-by: Paul Moore --- security/selinux/ss/policydb.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c index daecdfb15a9c..38d0083204f1 100644 --- a/security/selinux/ss/policydb.c +++ b/security/selinux/ss/policydb.c @@ -274,6 +274,8 @@ static int rangetr_cmp(struct hashtab *h, const void *k1, const void *k2) return v; } +static int (*destroy_f[SYM_NUM]) (void *key, void *datum, void *datap); + /* * Initialize a policy database structure. */ @@ -321,8 +323,10 @@ static int policydb_init(struct policydb *p) out: hashtab_destroy(p->filename_trans); hashtab_destroy(p->range_tr); - for (i = 0; i < SYM_NUM; i++) + for (i = 0; i < SYM_NUM; i++) { + hashtab_map(p->symtab[i].table, destroy_f[i], NULL); hashtab_destroy(p->symtab[i].table); + } return rc; } -- cgit From e29903c49990376e5e928b20f658cdf7c29bf1eb Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Mon, 29 Jul 2019 16:08:03 -0700 Subject: selftests/tls: fix TLS tests with CONFIG_TLS=n Build bot reports some recent TLS tests are failing with CONFIG_TLS=n. Correct the expected return code and skip TLS installation if not supported. Tested with CONFIG_TLS=n and CONFIG_TLS=m. Reported-by: kernel test robot Fixes: cf32526c8842 ("selftests/tls: add a test for ULP but no keys") Fixes: 65d41fb317c6 ("selftests/tls: add a bidirectional test") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- tools/testing/selftests/net/tls.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c index 630c5b884d43..d995e6503b1a 100644 --- a/tools/testing/selftests/net/tls.c +++ b/tools/testing/selftests/net/tls.c @@ -69,7 +69,7 @@ FIXTURE_SETUP(tls_basic) ret = setsockopt(self->fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls")); if (ret != 0) { - ASSERT_EQ(errno, ENOTSUPP); + ASSERT_EQ(errno, ENOENT); self->notls = true; printf("Failure setting TCP_ULP, testing without tls\n"); return; @@ -696,21 +696,26 @@ TEST_F(tls, recv_lowat) TEST_F(tls, bidir) { - struct tls12_crypto_info_aes_gcm_128 tls12; char const *test_str = "test_read"; int send_len = 10; char buf[10]; int ret; - memset(&tls12, 0, sizeof(tls12)); - tls12.info.version = TLS_1_3_VERSION; - tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128; + if (!self->notls) { + struct tls12_crypto_info_aes_gcm_128 tls12; - ret = setsockopt(self->fd, SOL_TLS, TLS_RX, &tls12, sizeof(tls12)); - ASSERT_EQ(ret, 0); + memset(&tls12, 0, sizeof(tls12)); + tls12.info.version = TLS_1_3_VERSION; + tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128; - ret = setsockopt(self->cfd, SOL_TLS, TLS_TX, &tls12, sizeof(tls12)); - ASSERT_EQ(ret, 0); + ret = setsockopt(self->fd, SOL_TLS, TLS_RX, &tls12, + sizeof(tls12)); + ASSERT_EQ(ret, 0); + + ret = setsockopt(self->cfd, SOL_TLS, TLS_TX, &tls12, + sizeof(tls12)); + ASSERT_EQ(ret, 0); + } ASSERT_EQ(strlen(test_str) + 1, send_len); -- cgit From 271da132e29b5341c31eca6ba6a72ea1302ebac8 Mon Sep 17 00:00:00 2001 From: Jia-Ju Bai Date: Tue, 30 Jul 2019 16:08:13 +0800 Subject: net: phy: phy_led_triggers: Fix a possible null-pointer dereference in phy_led_trigger_change_speed() In phy_led_trigger_change_speed(), there is an if statement on line 48 to check whether phy->last_triggered is NULL: if (!phy->last_triggered) When phy->last_triggered is NULL, it is used on line 52: led_trigger_event(&phy->last_triggered->trigger, LED_OFF); Thus, a possible null-pointer dereference may occur. To fix this bug, led_trigger_event(&phy->last_triggered->trigger, LED_OFF) is called when phy->last_triggered is not NULL. This bug is found by a static analysis tool STCheck written by the OSLAB group in Tsinghua University. Signed-off-by: Jia-Ju Bai Signed-off-by: David S. Miller --- drivers/net/phy/phy_led_triggers.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/phy_led_triggers.c b/drivers/net/phy/phy_led_triggers.c index b86a4b2116f8..59a94e07e7c5 100644 --- a/drivers/net/phy/phy_led_triggers.c +++ b/drivers/net/phy/phy_led_triggers.c @@ -48,8 +48,9 @@ void phy_led_trigger_change_speed(struct phy_device *phy) if (!phy->last_triggered) led_trigger_event(&phy->led_link_trigger->trigger, LED_FULL); + else + led_trigger_event(&phy->last_triggered->trigger, LED_OFF); - led_trigger_event(&phy->last_triggered->trigger, LED_OFF); led_trigger_event(&plt->trigger, LED_FULL); phy->last_triggered = plt; } -- cgit From 5c725b6b65067909548ac9ca9bc777098ec9883d Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Tue, 30 Jul 2019 14:21:00 +0300 Subject: net: bridge: mcast: don't delete permanent entries when fast leave is enabled When permanent entries were introduced by the commit below, they were exempt from timing out and thus igmp leave wouldn't affect them unless fast leave was enabled on the port which was added before permanent entries existed. It shouldn't matter if fast leave is enabled or not if the user added a permanent entry it shouldn't be deleted on igmp leave. Before: $ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave $ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent < join and leave 229.1.1.1 on eth4 > $ bridge mdb show $ After: $ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave $ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent < join and leave 229.1.1.1 on eth4 > $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent Fixes: ccb1c31a7a87 ("bridge: add flags to distinguish permanent mdb entires") Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- net/bridge/br_multicast.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 3d8deac2353d..f8cac3702712 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -1388,6 +1388,9 @@ br_multicast_leave_group(struct net_bridge *br, if (!br_port_group_equal(p, port, src)) continue; + if (p->flags & MDB_PG_FLAGS_PERMANENT) + break; + rcu_assign_pointer(*pp, p->next); hlist_del_init(&p->mglist); del_timer(&p->timer); -- cgit From 4d97972b45f080db4c6d27cc0b54321d9cd7be17 Mon Sep 17 00:00:00 2001 From: Frode Isaksen Date: Tue, 30 Jul 2019 13:38:14 +0200 Subject: net: stmmac: Use netif_tx_napi_add() for TX polling function This variant of netif_napi_add() should be used from drivers using NAPI to exclusively poll a TX queue. Signed-off-by: Frode Isaksen Tested-by: Bartosz Golaszewski Signed-off-by: Bartosz Golaszewski Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 9a4a56ad35cd..fd54c7c87485 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -4320,8 +4320,9 @@ int stmmac_dvr_probe(struct device *device, NAPI_POLL_WEIGHT); } if (queue < priv->plat->tx_queues_to_use) { - netif_napi_add(ndev, &ch->tx_napi, stmmac_napi_poll_tx, - NAPI_POLL_WEIGHT); + netif_tx_napi_add(ndev, &ch->tx_napi, + stmmac_napi_poll_tx, + NAPI_POLL_WEIGHT); } } -- cgit From 50f6393f9654c561df4cdcf8e6cfba7260143601 Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Fri, 14 Jun 2019 07:46:02 +0200 Subject: xen/swiotlb: fix condition for calling xen_destroy_contiguous_region() The condition in xen_swiotlb_free_coherent() for deciding whether to call xen_destroy_contiguous_region() is wrong: in case the region to be freed is not contiguous calling xen_destroy_contiguous_region() is the wrong thing to do: it would result in inconsistent mappings of multiple PFNs to the same MFN. This will lead to various strange crashes or data corruption. Instead of calling xen_destroy_contiguous_region() in that case a warning should be issued as that situation should never occur. Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Reviewed-by: Jan Beulich Acked-by: Konrad Rzeszutek Wilk Signed-off-by: Juergen Gross --- drivers/xen/swiotlb-xen.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index d53f3493a6b9..50fd7de54969 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -361,8 +361,8 @@ xen_swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr, /* Convert the size to actually allocated. */ size = 1UL << (order + XEN_PAGE_SHIFT); - if (((dev_addr + size - 1 <= dma_mask)) || - range_straddles_page_boundary(phys, size)) + if (!WARN_ON((dev_addr + size - 1 > dma_mask) || + range_straddles_page_boundary(phys, size))) xen_destroy_contiguous_region(phys, order); xen_free_coherent_pages(hwdev, size, vaddr, (dma_addr_t)phys, attrs); -- cgit From bf70726668c6116aa4976e0cc87f470be6268a2f Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Fri, 14 Jun 2019 07:46:03 +0200 Subject: xen/swiotlb: simplify range_straddles_page_boundary() range_straddles_page_boundary() is open coding several macros from include/xen/page.h. Use those instead. Additionally there is no need to have check_pages_physically_contiguous() as a separate function as it is used only once, so merge it into range_straddles_page_boundary(). Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Acked-by: Konrad Rzeszutek Wilk Signed-off-by: Juergen Gross --- drivers/xen/swiotlb-xen.c | 28 ++++++---------------------- 1 file changed, 6 insertions(+), 22 deletions(-) diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 50fd7de54969..37ddcfcfbb21 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -83,34 +83,18 @@ static inline dma_addr_t xen_virt_to_bus(void *address) return xen_phys_to_bus(virt_to_phys(address)); } -static int check_pages_physically_contiguous(unsigned long xen_pfn, - unsigned int offset, - size_t length) +static inline int range_straddles_page_boundary(phys_addr_t p, size_t size) { - unsigned long next_bfn; - int i; - int nr_pages; + unsigned long next_bfn, xen_pfn = XEN_PFN_DOWN(p); + unsigned int i, nr_pages = XEN_PFN_UP(xen_offset_in_page(p) + size); next_bfn = pfn_to_bfn(xen_pfn); - nr_pages = (offset + length + XEN_PAGE_SIZE-1) >> XEN_PAGE_SHIFT; - for (i = 1; i < nr_pages; i++) { + for (i = 1; i < nr_pages; i++) if (pfn_to_bfn(++xen_pfn) != ++next_bfn) - return 0; - } - return 1; -} + return 1; -static inline int range_straddles_page_boundary(phys_addr_t p, size_t size) -{ - unsigned long xen_pfn = XEN_PFN_DOWN(p); - unsigned int offset = p & ~XEN_PAGE_MASK; - - if (offset + size <= XEN_PAGE_SIZE) - return 0; - if (check_pages_physically_contiguous(xen_pfn, offset, size)) - return 0; - return 1; + return 0; } static int is_xen_swiotlb_buffer(dma_addr_t dma_addr) -- cgit From b877ac9815a8fe7e5f6d7fdde3dc34652408840a Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Fri, 14 Jun 2019 07:46:04 +0200 Subject: xen/swiotlb: remember having called xen_create_contiguous_region() Instead of always calling xen_destroy_contiguous_region() in case the memory is DMA-able for the used device, do so only in case it has been made DMA-able via xen_create_contiguous_region() before. This will avoid a lot of xen_destroy_contiguous_region() calls for 64-bit capable devices. As the memory in question is owned by swiotlb-xen the PG_owner_priv_1 flag of the first allocated page can be used for remembering. Signed-off-by: Juergen Gross Acked-by: Konrad Rzeszutek Wilk Signed-off-by: Juergen Gross --- drivers/xen/swiotlb-xen.c | 4 +++- include/linux/page-flags.h | 4 ++++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 37ddcfcfbb21..ceb681cf64bb 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -322,6 +322,7 @@ xen_swiotlb_alloc_coherent(struct device *hwdev, size_t size, xen_free_coherent_pages(hwdev, size, ret, (dma_addr_t)phys, attrs); return NULL; } + SetPageXenRemapped(virt_to_page(ret)); } memset(ret, 0, size); return ret; @@ -346,7 +347,8 @@ xen_swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr, size = 1UL << (order + XEN_PAGE_SHIFT); if (!WARN_ON((dev_addr + size - 1 > dma_mask) || - range_straddles_page_boundary(phys, size))) + range_straddles_page_boundary(phys, size)) && + TestClearPageXenRemapped(virt_to_page(vaddr))) xen_destroy_contiguous_region(phys, order); xen_free_coherent_pages(hwdev, size, vaddr, (dma_addr_t)phys, attrs); diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index b848517da64c..f91cb8898ff0 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -152,6 +152,8 @@ enum pageflags { PG_savepinned = PG_dirty, /* Has a grant mapping of another (foreign) domain's page. */ PG_foreign = PG_owner_priv_1, + /* Remapped by swiotlb-xen. */ + PG_xen_remapped = PG_owner_priv_1, /* SLOB */ PG_slob_free = PG_private, @@ -329,6 +331,8 @@ PAGEFLAG(Pinned, pinned, PF_NO_COMPOUND) TESTSCFLAG(Pinned, pinned, PF_NO_COMPOUND) PAGEFLAG(SavePinned, savepinned, PF_NO_COMPOUND); PAGEFLAG(Foreign, foreign, PF_NO_COMPOUND); +PAGEFLAG(XenRemapped, xen_remapped, PF_NO_COMPOUND) + TESTCLEARFLAG(XenRemapped, xen_remapped, PF_NO_COMPOUND) PAGEFLAG(Reserved, reserved, PF_NO_COMPOUND) __CLEARPAGEFLAG(Reserved, reserved, PF_NO_COMPOUND) -- cgit From 0de50e40fc685fed4d6896a379b123f859ffb17b Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 26 Jun 2019 16:45:49 +0100 Subject: drm/i915: Lift intel_engines_resume() to callers Since the reset path wants to recover the engines itself, it only wants to reinitialise the hardware using i915_gem_init_hw(). Pull the call to intel_engines_resume() to the module init/resume path so we can avoid it during reset. Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy") Signed-off-by: Chris Wilson Reviewed-by: Mika Kuoppala Cc: Tvrtko Ursulin Cc: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-3-chris@chris-wilson.co.uk (cherry picked from commit 092be382a2602067766f190a113514d469162456) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gem/i915_gem_pm.c | 7 ++++--- drivers/gpu/drm/i915/gt/intel_engine_pm.c | 24 ------------------------ drivers/gpu/drm/i915/gt/intel_engine_pm.h | 2 -- drivers/gpu/drm/i915/gt/intel_gt_pm.c | 21 ++++++++++++++++++++- drivers/gpu/drm/i915/gt/intel_gt_pm.h | 2 +- drivers/gpu/drm/i915/gt/intel_reset.c | 21 ++++++++++++++++++++- drivers/gpu/drm/i915/i915_gem.c | 25 +++++++++++-------------- 7 files changed, 56 insertions(+), 46 deletions(-) diff --git a/drivers/gpu/drm/i915/gem/i915_gem_pm.c b/drivers/gpu/drm/i915/gem/i915_gem_pm.c index 05011d4a3b88..914b5d4112bb 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_pm.c +++ b/drivers/gpu/drm/i915/gem/i915_gem_pm.c @@ -253,14 +253,15 @@ void i915_gem_resume(struct drm_i915_private *i915) i915_gem_restore_gtt_mappings(i915); i915_gem_restore_fences(i915); + if (i915_gem_init_hw(i915)) + goto err_wedged; + /* * As we didn't flush the kernel context before suspend, we cannot * guarantee that the context image is complete. So let's just reset * it and start again. */ - intel_gt_resume(i915); - - if (i915_gem_init_hw(i915)) + if (intel_gt_resume(i915)) goto err_wedged; intel_uc_resume(i915); diff --git a/drivers/gpu/drm/i915/gt/intel_engine_pm.c b/drivers/gpu/drm/i915/gt/intel_engine_pm.c index 2ce00d3dc42a..ae5b6baf6dff 100644 --- a/drivers/gpu/drm/i915/gt/intel_engine_pm.c +++ b/drivers/gpu/drm/i915/gt/intel_engine_pm.c @@ -142,27 +142,3 @@ void intel_engine_init__pm(struct intel_engine_cs *engine) { intel_wakeref_init(&engine->wakeref); } - -int intel_engines_resume(struct drm_i915_private *i915) -{ - struct intel_engine_cs *engine; - enum intel_engine_id id; - int err = 0; - - intel_gt_pm_get(i915); - for_each_engine(engine, i915, id) { - intel_engine_pm_get(engine); - engine->serial++; /* kernel context lost */ - err = engine->resume(engine); - intel_engine_pm_put(engine); - if (err) { - dev_err(i915->drm.dev, - "Failed to restart %s (%d)\n", - engine->name, err); - break; - } - } - intel_gt_pm_put(i915); - - return err; -} diff --git a/drivers/gpu/drm/i915/gt/intel_engine_pm.h b/drivers/gpu/drm/i915/gt/intel_engine_pm.h index b326cd993d60..f6f213fbc98c 100644 --- a/drivers/gpu/drm/i915/gt/intel_engine_pm.h +++ b/drivers/gpu/drm/i915/gt/intel_engine_pm.h @@ -17,6 +17,4 @@ void intel_engine_park(struct intel_engine_cs *engine); void intel_engine_init__pm(struct intel_engine_cs *engine); -int intel_engines_resume(struct drm_i915_private *i915); - #endif /* INTEL_ENGINE_PM_H */ diff --git a/drivers/gpu/drm/i915/gt/intel_gt_pm.c b/drivers/gpu/drm/i915/gt/intel_gt_pm.c index 7b5967751762..9f8f7f54191f 100644 --- a/drivers/gpu/drm/i915/gt/intel_gt_pm.c +++ b/drivers/gpu/drm/i915/gt/intel_gt_pm.c @@ -5,6 +5,7 @@ */ #include "i915_drv.h" +#include "intel_engine_pm.h" #include "intel_gt_pm.h" #include "intel_pm.h" #include "intel_wakeref.h" @@ -118,10 +119,11 @@ void intel_gt_sanitize(struct drm_i915_private *i915, bool force) intel_engine_reset(engine, false); } -void intel_gt_resume(struct drm_i915_private *i915) +int intel_gt_resume(struct drm_i915_private *i915) { struct intel_engine_cs *engine; enum intel_engine_id id; + int err = 0; /* * After resume, we may need to poke into the pinned kernel @@ -129,9 +131,12 @@ void intel_gt_resume(struct drm_i915_private *i915) * Only the kernel contexts should remain pinned over suspend, * allowing us to fixup the user contexts on their first pin. */ + intel_gt_pm_get(i915); for_each_engine(engine, i915, id) { struct intel_context *ce; + intel_engine_pm_get(engine); + ce = engine->kernel_context; if (ce) ce->ops->reset(ce); @@ -139,5 +144,19 @@ void intel_gt_resume(struct drm_i915_private *i915) ce = engine->preempt_context; if (ce) ce->ops->reset(ce); + + engine->serial++; /* kernel context lost */ + err = engine->resume(engine); + + intel_engine_pm_put(engine); + if (err) { + dev_err(i915->drm.dev, + "Failed to restart %s (%d)\n", + engine->name, err); + break; + } } + intel_gt_pm_put(i915); + + return err; } diff --git a/drivers/gpu/drm/i915/gt/intel_gt_pm.h b/drivers/gpu/drm/i915/gt/intel_gt_pm.h index 7dd1130a19a4..53f342b20181 100644 --- a/drivers/gpu/drm/i915/gt/intel_gt_pm.h +++ b/drivers/gpu/drm/i915/gt/intel_gt_pm.h @@ -22,6 +22,6 @@ void intel_gt_pm_put(struct drm_i915_private *i915); void intel_gt_pm_init(struct drm_i915_private *i915); void intel_gt_sanitize(struct drm_i915_private *i915, bool force); -void intel_gt_resume(struct drm_i915_private *i915); +int intel_gt_resume(struct drm_i915_private *i915); #endif /* INTEL_GT_PM_H */ diff --git a/drivers/gpu/drm/i915/gt/intel_reset.c b/drivers/gpu/drm/i915/gt/intel_reset.c index 4c478b38e420..0439ed66e969 100644 --- a/drivers/gpu/drm/i915/gt/intel_reset.c +++ b/drivers/gpu/drm/i915/gt/intel_reset.c @@ -951,6 +951,21 @@ static int do_reset(struct drm_i915_private *i915, return gt_reset(i915, stalled_mask); } +static int resume(struct drm_i915_private *i915) +{ + struct intel_engine_cs *engine; + enum intel_engine_id id; + int ret; + + for_each_engine(engine, i915, id) { + ret = engine->resume(engine); + if (ret) + return ret; + } + + return 0; +} + /** * i915_reset - reset chip after a hang * @i915: #drm_i915_private to reset @@ -1024,9 +1039,13 @@ void i915_reset(struct drm_i915_private *i915, if (ret) { DRM_ERROR("Failed to initialise HW following reset (%d)\n", ret); - goto error; + goto taint; } + ret = resume(i915); + if (ret) + goto taint; + i915_queue_hangcheck(i915); finish: diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 190ad54fb072..8a659d3d7435 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -46,7 +46,6 @@ #include "gem/i915_gem_ioctls.h" #include "gem/i915_gem_pm.h" #include "gem/i915_gemfs.h" -#include "gt/intel_engine_pm.h" #include "gt/intel_gt_pm.h" #include "gt/intel_mocs.h" #include "gt/intel_reset.h" @@ -1307,21 +1306,13 @@ int i915_gem_init_hw(struct drm_i915_private *dev_priv) intel_mocs_init_l3cc_table(dev_priv); - /* Only when the HW is re-initialised, can we replay the requests */ - ret = intel_engines_resume(dev_priv); - if (ret) - goto cleanup_uc; - intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL); intel_engines_set_scheduler_caps(dev_priv); return 0; -cleanup_uc: - intel_uc_fini_hw(dev_priv); out: intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL); - return ret; } @@ -1580,6 +1571,11 @@ int i915_gem_init(struct drm_i915_private *dev_priv) if (ret) goto err_uc_init; + /* Only when the HW is re-initialised, can we replay the requests */ + ret = intel_gt_resume(dev_priv); + if (ret) + goto err_init_hw; + /* * Despite its name intel_init_clock_gating applies both display * clock gating workarounds; GT mmio workarounds and the occasional @@ -1593,20 +1589,20 @@ int i915_gem_init(struct drm_i915_private *dev_priv) ret = intel_engines_verify_workarounds(dev_priv); if (ret) - goto err_init_hw; + goto err_gt; ret = __intel_engines_record_defaults(dev_priv); if (ret) - goto err_init_hw; + goto err_gt; if (i915_inject_load_failure()) { ret = -ENODEV; - goto err_init_hw; + goto err_gt; } if (i915_inject_load_failure()) { ret = -EIO; - goto err_init_hw; + goto err_gt; } intel_uncore_forcewake_put(&dev_priv->uncore, FORCEWAKE_ALL); @@ -1620,7 +1616,7 @@ int i915_gem_init(struct drm_i915_private *dev_priv) * HW as irrevisibly wedged, but keep enough state around that the * driver doesn't explode during runtime. */ -err_init_hw: +err_gt: mutex_unlock(&dev_priv->drm.struct_mutex); i915_gem_set_wedged(dev_priv); @@ -1630,6 +1626,7 @@ err_init_hw: i915_gem_drain_workqueue(dev_priv); mutex_lock(&dev_priv->drm.struct_mutex); +err_init_hw: intel_uc_fini_hw(dev_priv); err_uc_init: intel_uc_fini(dev_priv); -- cgit From b1fa6fd94fc6a5d6be85359743b5f3626f3f881c Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 26 Jun 2019 16:45:47 +0100 Subject: drm/i915: Add a wakeref getter for iff the wakeref is already active For use in the next patch, we want to acquire a wakeref without having to wake the device up -- i.e. only acquire the engine wakeref if the engine is already active. Signed-off-by: Chris Wilson Reviewed-by: Mika Kuoppala Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-1-chris@chris-wilson.co.uk (cherry picked from commit de5147b8ce6d51f634661d7c531385371485cec6) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_engine_pm.h | 10 +++++++++- drivers/gpu/drm/i915/intel_wakeref.h | 15 +++++++++++++++ 2 files changed, 24 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/gt/intel_engine_pm.h b/drivers/gpu/drm/i915/gt/intel_engine_pm.h index f6f213fbc98c..a11c893f64c6 100644 --- a/drivers/gpu/drm/i915/gt/intel_engine_pm.h +++ b/drivers/gpu/drm/i915/gt/intel_engine_pm.h @@ -7,12 +7,20 @@ #ifndef INTEL_ENGINE_PM_H #define INTEL_ENGINE_PM_H +#include "intel_engine_types.h" +#include "intel_wakeref.h" + struct drm_i915_private; -struct intel_engine_cs; void intel_engine_pm_get(struct intel_engine_cs *engine); void intel_engine_pm_put(struct intel_engine_cs *engine); +static inline bool +intel_engine_pm_get_if_awake(struct intel_engine_cs *engine) +{ + return intel_wakeref_get_if_active(&engine->wakeref); +} + void intel_engine_park(struct intel_engine_cs *engine); void intel_engine_init__pm(struct intel_engine_cs *engine); diff --git a/drivers/gpu/drm/i915/intel_wakeref.h b/drivers/gpu/drm/i915/intel_wakeref.h index 9cbb2ebf575b..38275310b196 100644 --- a/drivers/gpu/drm/i915/intel_wakeref.h +++ b/drivers/gpu/drm/i915/intel_wakeref.h @@ -65,6 +65,21 @@ intel_wakeref_get(struct intel_runtime_pm *rpm, return 0; } +/** + * intel_wakeref_get_if_in_use: Acquire the wakeref + * @wf: the wakeref + * + * Acquire a hold on the wakeref, but only if the wakeref is already + * active. + * + * Returns: true if the wakeref was acquired, false otherwise. + */ +static inline bool +intel_wakeref_get_if_active(struct intel_wakeref *wf) +{ + return atomic_inc_not_zero(&wf->count); +} + /** * intel_wakeref_put: Release the wakeref * @i915: the drm_i915_private device -- cgit From 4b9bb9728c915c6079619e71e3340fe4840d9d40 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 26 Jun 2019 16:45:48 +0100 Subject: drm/i915: Only recover active engines If we issue a reset to a currently idle engine, leave it idle afterwards. This is useful to excise a linkage between reset and the shrinker. When waking the engine, we need to pin the default context image which we use for overwriting a guilty context -- if the engine is idle we do not need this pinned image! However, this pinning means that waking the engine acquires the FS_RECLAIM, and so may trigger the shrinker. The shrinker itself may need to wait upon the GPU to unbind and object and so may require services of reset; ergo we should avoid the engine wake up path. The danger in skipping the recovery for idle engines is that we leave the engine with no context defined, which may interfere with the operation of the power context on some older platforms. In practice, we should only be resetting an active GPU but it something to look out for on Ironlake (if memory serves). Fixes: 79ffac8599c4 ("drm/i915: Invert the GEM wakeref hierarchy") Signed-off-by: Chris Wilson Reviewed-by: Mika Kuoppala Cc: Tvrtko Ursulin Cc: Imre Deak Link: https://patchwork.freedesktop.org/patch/msgid/20190626154549.10066-2-chris@chris-wilson.co.uk (cherry picked from commit 18398904ca9e3ddd180e2ecd45886e146b1d9d5b) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/gt/intel_reset.c | 37 +++++++++++++++++++------------- drivers/gpu/drm/i915/gt/selftest_reset.c | 5 ++++- 2 files changed, 26 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/i915/gt/intel_reset.c b/drivers/gpu/drm/i915/gt/intel_reset.c index 0439ed66e969..3f907701ef4d 100644 --- a/drivers/gpu/drm/i915/gt/intel_reset.c +++ b/drivers/gpu/drm/i915/gt/intel_reset.c @@ -687,7 +687,6 @@ static void reset_prepare_engine(struct intel_engine_cs *engine) * written to the powercontext is undefined and so we may lose * GPU state upon resume, i.e. fail to restart after a reset. */ - intel_engine_pm_get(engine); intel_uncore_forcewake_get(engine->uncore, FORCEWAKE_ALL); engine->reset.prepare(engine); } @@ -718,16 +717,21 @@ static void revoke_mmaps(struct drm_i915_private *i915) } } -static void reset_prepare(struct drm_i915_private *i915) +static intel_engine_mask_t reset_prepare(struct drm_i915_private *i915) { struct intel_engine_cs *engine; + intel_engine_mask_t awake = 0; enum intel_engine_id id; - intel_gt_pm_get(i915); - for_each_engine(engine, i915, id) + for_each_engine(engine, i915, id) { + if (intel_engine_pm_get_if_awake(engine)) + awake |= engine->mask; reset_prepare_engine(engine); + } intel_uc_reset_prepare(i915); + + return awake; } static void gt_revoke(struct drm_i915_private *i915) @@ -761,20 +765,22 @@ static int gt_reset(struct drm_i915_private *i915, static void reset_finish_engine(struct intel_engine_cs *engine) { engine->reset.finish(engine); - intel_engine_pm_put(engine); intel_uncore_forcewake_put(engine->uncore, FORCEWAKE_ALL); + + intel_engine_signal_breadcrumbs(engine); } -static void reset_finish(struct drm_i915_private *i915) +static void reset_finish(struct drm_i915_private *i915, + intel_engine_mask_t awake) { struct intel_engine_cs *engine; enum intel_engine_id id; for_each_engine(engine, i915, id) { reset_finish_engine(engine); - intel_engine_signal_breadcrumbs(engine); + if (awake & engine->mask) + intel_engine_pm_put(engine); } - intel_gt_pm_put(i915); } static void nop_submit_request(struct i915_request *request) @@ -798,6 +804,7 @@ static void __i915_gem_set_wedged(struct drm_i915_private *i915) { struct i915_gpu_error *error = &i915->gpu_error; struct intel_engine_cs *engine; + intel_engine_mask_t awake; enum intel_engine_id id; if (test_bit(I915_WEDGED, &error->flags)) @@ -817,7 +824,7 @@ static void __i915_gem_set_wedged(struct drm_i915_private *i915) * rolling the global seqno forward (since this would complete requests * for which we haven't set the fence error to EIO yet). */ - reset_prepare(i915); + awake = reset_prepare(i915); /* Even if the GPU reset fails, it should still stop the engines */ if (!INTEL_INFO(i915)->gpu_reset_clobbers_display) @@ -841,7 +848,7 @@ static void __i915_gem_set_wedged(struct drm_i915_private *i915) for_each_engine(engine, i915, id) engine->cancel_requests(engine); - reset_finish(i915); + reset_finish(i915, awake); GEM_TRACE("end\n"); } @@ -988,6 +995,7 @@ void i915_reset(struct drm_i915_private *i915, const char *reason) { struct i915_gpu_error *error = &i915->gpu_error; + intel_engine_mask_t awake; int ret; GEM_TRACE("flags=%lx\n", error->flags); @@ -1004,7 +1012,7 @@ void i915_reset(struct drm_i915_private *i915, dev_notice(i915->drm.dev, "Resetting chip for %s\n", reason); error->reset_count++; - reset_prepare(i915); + awake = reset_prepare(i915); if (!intel_has_gpu_reset(i915)) { if (i915_modparams.reset) @@ -1049,7 +1057,7 @@ void i915_reset(struct drm_i915_private *i915, i915_queue_hangcheck(i915); finish: - reset_finish(i915); + reset_finish(i915, awake); unlock: mutex_unlock(&error->wedge_mutex); return; @@ -1100,7 +1108,7 @@ int i915_reset_engine(struct intel_engine_cs *engine, const char *msg) GEM_TRACE("%s flags=%lx\n", engine->name, error->flags); GEM_BUG_ON(!test_bit(I915_RESET_ENGINE + engine->id, &error->flags)); - if (!intel_wakeref_active(&engine->wakeref)) + if (!intel_engine_pm_get_if_awake(engine)) return 0; reset_prepare_engine(engine); @@ -1135,12 +1143,11 @@ int i915_reset_engine(struct intel_engine_cs *engine, const char *msg) * process to program RING_MODE, HWSP and re-enable submission. */ ret = engine->resume(engine); - if (ret) - goto out; out: intel_engine_cancel_stop_cs(engine); reset_finish_engine(engine); + intel_engine_pm_put(engine); return ret; } diff --git a/drivers/gpu/drm/i915/gt/selftest_reset.c b/drivers/gpu/drm/i915/gt/selftest_reset.c index 89da9e7cc1ba..b5c590c9ccba 100644 --- a/drivers/gpu/drm/i915/gt/selftest_reset.c +++ b/drivers/gpu/drm/i915/gt/selftest_reset.c @@ -71,13 +71,16 @@ static int igt_atomic_reset(void *arg) goto unlock; for (p = igt_atomic_phases; p->name; p++) { + intel_engine_mask_t awake; + GEM_TRACE("intel_gpu_reset under %s\n", p->name); + awake = reset_prepare(i915); p->critical_section_begin(); reset_prepare(i915); err = intel_gpu_reset(i915, ALL_ENGINES); - reset_finish(i915); p->critical_section_end(); + reset_finish(i915, awake); if (err) { pr_err("intel_gpu_reset failed under %s\n", p->name); -- cgit From 3fe6c873af2f2247544debdbe51ec29f690a2ccf Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 1 Aug 2019 13:33:39 +0200 Subject: parisc: Fix build of compressed kernel even with debug enabled With debug info enabled (CONFIG_DEBUG_INFO=y) the resulting vmlinux may get that huge that we need to increase the start addresss for the decompression text section otherwise one will face a linker error. Reported-by: Sven Schnelle Tested-by: Sven Schnelle Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Helge Deller --- arch/parisc/boot/compressed/vmlinux.lds.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/parisc/boot/compressed/vmlinux.lds.S b/arch/parisc/boot/compressed/vmlinux.lds.S index bfd7872739a3..2ac3a643f2eb 100644 --- a/arch/parisc/boot/compressed/vmlinux.lds.S +++ b/arch/parisc/boot/compressed/vmlinux.lds.S @@ -48,8 +48,8 @@ SECTIONS *(.rodata.compressed) } - /* bootloader code and data starts behind area of extracted kernel */ - . = (SZ_end - SZparisc_kernel_start + KERNEL_BINARY_TEXT_START); + /* bootloader code and data starts at least behind area of extracted kernel */ + . = MAX(ABSOLUTE(.), (SZ_end - SZparisc_kernel_start + KERNEL_BINARY_TEXT_START)); /* align on next page boundary */ . = ALIGN(4096); -- cgit From e50beea8e7738377b4fa664078547be338038ff9 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 1 Aug 2019 13:42:18 +0200 Subject: parisc: Strip debug info from kernel before creating compressed vmlinuz Same as on x86-64, strip the .comment, .note and debug sections from the Linux kernel before creating the compressed image for the boot loader. Reported-by: James Bottomley Reported-by: Sven Schnelle Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Helge Deller --- arch/parisc/boot/compressed/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/parisc/boot/compressed/Makefile b/arch/parisc/boot/compressed/Makefile index 2da8624e5cf6..3b28d1b92218 100644 --- a/arch/parisc/boot/compressed/Makefile +++ b/arch/parisc/boot/compressed/Makefile @@ -55,7 +55,8 @@ $(obj)/misc.o: $(obj)/sizes.h CPPFLAGS_vmlinux.lds += -I$(objtree)/$(obj) -DBOOTLOADER $(obj)/vmlinux.lds: $(obj)/sizes.h -$(obj)/vmlinux.bin: vmlinux +OBJCOPYFLAGS_vmlinux.bin := -R .comment -R .note -S +$(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) vmlinux.bin.all-y := $(obj)/vmlinux.bin -- cgit From f2c5ed0dd5004c2cff5c0e3d430a107576fcc17f Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 1 Aug 2019 13:47:03 +0200 Subject: parisc: Add archclean Makefile target Apparently we don't have an archclean target in our arch/parisc/Makefile, so files in there never get cleaned out by make mrproper. This, in turn means that the sizes.h file in arch/parisc/boot/compressed never gets removed and worse, when you transition to an O=build/parisc[64] build model it overrides the generated file. The upshot being my bzImage was building with a SZ_end that was too small. I fixed it by making mrproper clean everything. Signed-off-by: James Bottomley Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Helge Deller --- arch/parisc/Makefile | 3 +++ arch/parisc/boot/compressed/Makefile | 1 + 2 files changed, 4 insertions(+) diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index b10a1179291a..3b77d729057f 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -180,5 +180,8 @@ define archhelp @echo ' zinstall - Install compressed vmlinuz kernel' endef +archclean: + $(Q)$(MAKE) $(clean)=$(boot) + archheaders: $(Q)$(MAKE) $(build)=arch/parisc/kernel/syscalls all diff --git a/arch/parisc/boot/compressed/Makefile b/arch/parisc/boot/compressed/Makefile index 3b28d1b92218..1e5879c6a752 100644 --- a/arch/parisc/boot/compressed/Makefile +++ b/arch/parisc/boot/compressed/Makefile @@ -12,6 +12,7 @@ UBSAN_SANITIZE := n targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 targets += vmlinux.bin.xz vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.lz4 targets += misc.o piggy.o sizes.h head.o real2.o firmware.o +targets += real2.S firmware.c KBUILD_CFLAGS := -D__KERNEL__ -O2 -DBOOTLOADER KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING -- cgit From fd01eecdf9591453177d7b06faaabef8c300114a Mon Sep 17 00:00:00 2001 From: Rayagonda Kokatanur Date: Wed, 24 Jul 2019 13:58:27 +0530 Subject: i2c: iproc: Fix i2c master read more than 63 bytes Use SMBUS_MASTER_DATA_READ.MASTER_RD_STATUS bit to check for RX FIFO empty condition because SMBUS_MASTER_FIFO_CONTROL.MASTER_RX_PKT_COUNT is not updated for read >= 64 bytes. This fixes the issue when trying to read from the I2C slave more than 63 bytes. Fixes: c24b8d574b7c ("i2c: iproc: Extend I2C read up to 255 bytes") Cc: stable@kernel.org Signed-off-by: Rayagonda Kokatanur Reviewed-by: Ray Jui Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-bcm-iproc.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index 2c7f145a036e..d7fd76baec92 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -392,16 +392,18 @@ static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c, static void bcm_iproc_i2c_read_valid_bytes(struct bcm_iproc_i2c_dev *iproc_i2c) { struct i2c_msg *msg = iproc_i2c->msg; + uint32_t val; /* Read valid data from RX FIFO */ while (iproc_i2c->rx_bytes < msg->len) { - if (!((iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET) >> M_FIFO_RX_CNT_SHIFT) - & M_FIFO_RX_CNT_MASK)) + val = iproc_i2c_rd_reg(iproc_i2c, M_RX_OFFSET); + + /* rx fifo empty */ + if (!((val >> M_RX_STATUS_SHIFT) & M_RX_STATUS_MASK)) break; msg->buf[iproc_i2c->rx_bytes] = - (iproc_i2c_rd_reg(iproc_i2c, M_RX_OFFSET) >> - M_RX_DATA_SHIFT) & M_RX_DATA_MASK; + (val >> M_RX_DATA_SHIFT) & M_RX_DATA_MASK; iproc_i2c->rx_bytes++; } } -- cgit From d9b42dfab513c9130ee0458f2e6febb75c89d1c8 Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann Date: Wed, 3 Jul 2019 09:58:18 +0200 Subject: drm/client: Support unmapping of DRM client buffers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit DRM clients, such as the fbdev emulation, have their buffer objects mapped by default. Mapping a buffer implicitly prevents its relocation. Hence, the buffer may permanently consume video memory while it's allocated. This is a problem for drivers of low-memory devices, such as ast, mgag200 or older framebuffer hardware, which will then not have enough memory to display other content (e.g., X11). This patch introduces drm_client_buffer_vmap() and _vunmap(). Internal DRM clients can use these functions to unmap and remap buffer objects as needed. There's no reference counting for vmap operations. Callers are expected to either keep buffers mapped (as it is now), or call vmap and vunmap in pairs around code that accesses the mapped memory. v2: * remove several duplicated NULL-pointer checks v3: * style and typo fixes Signed-off-by: Thomas Zimmermann Reviewed-by: Noralf Trønnes Link: https://patchwork.freedesktop.org/patch/315831/ Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/drm_client.c | 66 +++++++++++++++++++++++++++++++++++++------- include/drm/drm_client.h | 2 ++ 2 files changed, 58 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/drm_client.c b/drivers/gpu/drm/drm_client.c index 410572f14257..fb107b24baae 100644 --- a/drivers/gpu/drm/drm_client.c +++ b/drivers/gpu/drm/drm_client.c @@ -281,6 +281,42 @@ drm_client_buffer_create(struct drm_client_dev *client, u32 width, u32 height, u buffer->gem = obj; + vaddr = drm_client_buffer_vmap(buffer); + if (IS_ERR(vaddr)) { + ret = PTR_ERR(vaddr); + goto err_delete; + } + + return buffer; + +err_delete: + drm_client_buffer_delete(buffer); + + return ERR_PTR(ret); +} + +/** + * drm_client_buffer_vmap - Map DRM client buffer into address space + * @buffer: DRM client buffer + * + * This function maps a client buffer into kernel address space. If the + * buffer is already mapped, it returns the mapping's address. + * + * Client buffer mappings are not ref'counted. Each call to + * drm_client_buffer_vmap() should be followed by a call to + * drm_client_buffer_vunmap(); or the client buffer should be mapped + * throughout its lifetime. The latter is the default. + * + * Returns: + * The mapped memory's address + */ +void *drm_client_buffer_vmap(struct drm_client_buffer *buffer) +{ + void *vaddr; + + if (buffer->vaddr) + return buffer->vaddr; + /* * FIXME: The dependency on GEM here isn't required, we could * convert the driver handle to a dma-buf instead and use the @@ -289,21 +325,31 @@ drm_client_buffer_create(struct drm_client_dev *client, u32 width, u32 height, u * fd_install step out of the driver backend hooks, to make that * final step optional for internal users. */ - vaddr = drm_gem_vmap(obj); - if (IS_ERR(vaddr)) { - ret = PTR_ERR(vaddr); - goto err_delete; - } + vaddr = drm_gem_vmap(buffer->gem); + if (IS_ERR(vaddr)) + return vaddr; buffer->vaddr = vaddr; - return buffer; - -err_delete: - drm_client_buffer_delete(buffer); + return vaddr; +} +EXPORT_SYMBOL(drm_client_buffer_vmap); - return ERR_PTR(ret); +/** + * drm_client_buffer_vunmap - Unmap DRM client buffer + * @buffer: DRM client buffer + * + * This function removes a client buffer's memory mapping. This + * function is only required by clients that manage their buffers + * by themselves. By default, DRM client buffers are mapped throughout + * their entire lifetime. + */ +void drm_client_buffer_vunmap(struct drm_client_buffer *buffer) +{ + drm_gem_vunmap(buffer->gem, buffer->vaddr); + buffer->vaddr = NULL; } +EXPORT_SYMBOL(drm_client_buffer_vunmap); static void drm_client_buffer_rmfb(struct drm_client_buffer *buffer) { diff --git a/include/drm/drm_client.h b/include/drm/drm_client.h index 72d51d1e9dd9..5cf2c5dd8b1e 100644 --- a/include/drm/drm_client.h +++ b/include/drm/drm_client.h @@ -149,6 +149,8 @@ struct drm_client_buffer { struct drm_client_buffer * drm_client_framebuffer_create(struct drm_client_dev *client, u32 width, u32 height, u32 format); void drm_client_framebuffer_delete(struct drm_client_buffer *buffer); +void *drm_client_buffer_vmap(struct drm_client_buffer *buffer); +void drm_client_buffer_vunmap(struct drm_client_buffer *buffer); int drm_client_modeset_create(struct drm_client_dev *client); void drm_client_modeset_free(struct drm_client_dev *client); -- cgit From 87e281f88f3aa4ed401554f793685bcb2463580a Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann Date: Wed, 3 Jul 2019 09:58:24 +0200 Subject: drm/fb-helper: Map DRM client buffer only when required MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch changes DRM clients to not map the buffer by default. The buffer, like any buffer object, should be mapped and unmapped when needed. An unmapped buffer object can be evicted to system memory and does not consume video ram until displayed. This allows to use generic fbdev emulation with drivers for low-memory devices, such as ast and mgag200. This change affects the generic framebuffer console. HW-based consoles map their console buffer once and keep it mapped. Userspace can mmap this buffer into its address space. The shadow-buffered framebuffer console only needs the buffer object to be mapped during updates. While not being updated from the shadow buffer, the buffer object can remain unmapped. Userspace will always mmap the shadow buffer. v2: * change DRM client to not map buffer by default * manually map client buffer for fbdev with HW framebuffer Signed-off-by: Thomas Zimmermann Reviewed-by: Noralf Trønnes Link: https://patchwork.freedesktop.org/patch/315830/ Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/drm_client.c | 16 ++++------------ drivers/gpu/drm/drm_fb_helper.c | 33 +++++++++++++++++++++++++-------- 2 files changed, 29 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/drm_client.c b/drivers/gpu/drm/drm_client.c index fb107b24baae..e1dafb0cc5e2 100644 --- a/drivers/gpu/drm/drm_client.c +++ b/drivers/gpu/drm/drm_client.c @@ -254,7 +254,6 @@ drm_client_buffer_create(struct drm_client_dev *client, u32 width, u32 height, u struct drm_device *dev = client->dev; struct drm_client_buffer *buffer; struct drm_gem_object *obj; - void *vaddr; int ret; buffer = kzalloc(sizeof(*buffer), GFP_KERNEL); @@ -281,12 +280,6 @@ drm_client_buffer_create(struct drm_client_dev *client, u32 width, u32 height, u buffer->gem = obj; - vaddr = drm_client_buffer_vmap(buffer); - if (IS_ERR(vaddr)) { - ret = PTR_ERR(vaddr); - goto err_delete; - } - return buffer; err_delete: @@ -305,7 +298,7 @@ err_delete: * Client buffer mappings are not ref'counted. Each call to * drm_client_buffer_vmap() should be followed by a call to * drm_client_buffer_vunmap(); or the client buffer should be mapped - * throughout its lifetime. The latter is the default. + * throughout its lifetime. * * Returns: * The mapped memory's address @@ -339,10 +332,9 @@ EXPORT_SYMBOL(drm_client_buffer_vmap); * drm_client_buffer_vunmap - Unmap DRM client buffer * @buffer: DRM client buffer * - * This function removes a client buffer's memory mapping. This - * function is only required by clients that manage their buffers - * by themselves. By default, DRM client buffers are mapped throughout - * their entire lifetime. + * This function removes a client buffer's memory mapping. Calling this + * function is only required by clients that manage their buffer mappings + * by themselves. */ void drm_client_buffer_vunmap(struct drm_client_buffer *buffer) { diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 1984e5c54d58..7ba6a0255821 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -403,6 +403,7 @@ static void drm_fb_helper_dirty_work(struct work_struct *work) struct drm_clip_rect *clip = &helper->dirty_clip; struct drm_clip_rect clip_copy; unsigned long flags; + void *vaddr; spin_lock_irqsave(&helper->dirty_lock, flags); clip_copy = *clip; @@ -412,10 +413,18 @@ static void drm_fb_helper_dirty_work(struct work_struct *work) /* call dirty callback only when it has been really touched */ if (clip_copy.x1 < clip_copy.x2 && clip_copy.y1 < clip_copy.y2) { + /* Generic fbdev uses a shadow buffer */ - if (helper->buffer) + if (helper->buffer) { + vaddr = drm_client_buffer_vmap(helper->buffer); + if (IS_ERR(vaddr)) + return; drm_fb_helper_dirty_blit_real(helper, &clip_copy); + } helper->fb->funcs->dirty(helper->fb, NULL, 0, 0, &clip_copy, 1); + + if (helper->buffer) + drm_client_buffer_vunmap(helper->buffer); } } @@ -2178,6 +2187,7 @@ int drm_fb_helper_generic_probe(struct drm_fb_helper *fb_helper, struct drm_framebuffer *fb; struct fb_info *fbi; u32 format; + void *vaddr; DRM_DEBUG_KMS("surface width(%d), height(%d) and bpp(%d)\n", sizes->surface_width, sizes->surface_height, @@ -2200,13 +2210,7 @@ int drm_fb_helper_generic_probe(struct drm_fb_helper *fb_helper, fbi->fbops = &drm_fbdev_fb_ops; fbi->screen_size = fb->height * fb->pitches[0]; fbi->fix.smem_len = fbi->screen_size; - fbi->screen_buffer = buffer->vaddr; - /* Shamelessly leak the physical address to user-space */ -#if IS_ENABLED(CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM) - if (drm_leak_fbdev_smem && fbi->fix.smem_start == 0) - fbi->fix.smem_start = - page_to_phys(virt_to_page(fbi->screen_buffer)); -#endif + drm_fb_helper_fill_info(fbi, fb_helper, sizes); if (fb->funcs->dirty) { @@ -2231,6 +2235,19 @@ int drm_fb_helper_generic_probe(struct drm_fb_helper *fb_helper, fbi->fbdefio = &drm_fbdev_defio; fb_deferred_io_init(fbi); + } else { + /* buffer is mapped for HW framebuffer */ + vaddr = drm_client_buffer_vmap(fb_helper->buffer); + if (IS_ERR(vaddr)) + return PTR_ERR(vaddr); + + fbi->screen_buffer = vaddr; + /* Shamelessly leak the physical address to user-space */ +#if IS_ENABLED(CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM) + if (drm_leak_fbdev_smem && fbi->fix.smem_start == 0) + fbi->fix.smem_start = + page_to_phys(virt_to_page(fbi->screen_buffer)); +#endif } return 0; -- cgit From 01b947afaa940327e7adf57070a4bf3d0bed9810 Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann Date: Fri, 5 Jul 2019 09:31:00 +0200 Subject: drm/fb-helper: Instanciate shadow FB if configured in device's mode_config MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Generic framebuffer emulation uses a shadow buffer for framebuffers with dirty() function. If drivers want to use the shadow FB without such a function, they can now set prefer_shadow or prefer_shadow_fbdev in their mode_config structures. The former flag is exported to userspace, the latter flag is fbdev-only. v3: * only schedule dirty worker if fbdev uses shadow fb * test shadow fb settings with boolean operators * use bool for struct drm_mode_config.prefer_shadow_fbdev * fix documentation comments Signed-off-by: Thomas Zimmermann Reviewed-by: Noralf Trønnes Tested-by: Noralf Trønnes Link: https://patchwork.freedesktop.org/patch/315834/ Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/drm_fb_helper.c | 18 +++++++++++++++--- include/drm/drm_mode_config.h | 7 +++++++ 2 files changed, 22 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 7ba6a0255821..a7ba5b4902d6 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -421,7 +421,9 @@ static void drm_fb_helper_dirty_work(struct work_struct *work) return; drm_fb_helper_dirty_blit_real(helper, &clip_copy); } - helper->fb->funcs->dirty(helper->fb, NULL, 0, 0, &clip_copy, 1); + if (helper->fb->funcs->dirty) + helper->fb->funcs->dirty(helper->fb, NULL, 0, 0, + &clip_copy, 1); if (helper->buffer) drm_client_buffer_vunmap(helper->buffer); @@ -613,6 +615,16 @@ void drm_fb_helper_unlink_fbi(struct drm_fb_helper *fb_helper) } EXPORT_SYMBOL(drm_fb_helper_unlink_fbi); +static bool drm_fbdev_use_shadow_fb(struct drm_fb_helper *fb_helper) +{ + struct drm_device *dev = fb_helper->dev; + struct drm_framebuffer *fb = fb_helper->fb; + + return dev->mode_config.prefer_shadow_fbdev || + dev->mode_config.prefer_shadow || + fb->funcs->dirty; +} + static void drm_fb_helper_dirty(struct fb_info *info, u32 x, u32 y, u32 width, u32 height) { @@ -620,7 +632,7 @@ static void drm_fb_helper_dirty(struct fb_info *info, u32 x, u32 y, struct drm_clip_rect *clip = &helper->dirty_clip; unsigned long flags; - if (!helper->fb->funcs->dirty) + if (!drm_fbdev_use_shadow_fb(helper)) return; spin_lock_irqsave(&helper->dirty_lock, flags); @@ -2213,7 +2225,7 @@ int drm_fb_helper_generic_probe(struct drm_fb_helper *fb_helper, drm_fb_helper_fill_info(fbi, fb_helper, sizes); - if (fb->funcs->dirty) { + if (drm_fbdev_use_shadow_fb(fb_helper)) { struct fb_ops *fbops; void *shadow; diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h index 759d462d028b..f57eea0481e0 100644 --- a/include/drm/drm_mode_config.h +++ b/include/drm/drm_mode_config.h @@ -852,6 +852,13 @@ struct drm_mode_config { /* dumb ioctl parameters */ uint32_t preferred_depth, prefer_shadow; + /** + * @prefer_shadow_fbdev: + * + * Hint to framebuffer emulation to prefer shadow-fb rendering. + */ + bool prefer_shadow_fbdev; + /** * @quirk_addfb_prefer_xbgr_30bpp: * -- cgit From 58540594570778fd149cd8c9b2bff61f2cefa8c9 Mon Sep 17 00:00:00 2001 From: Thomas Zimmermann Date: Wed, 3 Jul 2019 09:58:34 +0200 Subject: drm/bochs: Use shadow buffer for bochs framebuffer console MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The bochs driver (and virtual hardware) requires buffer objects to reside in video ram to display them to the screen. So it can not display the framebuffer console because the respective buffer object is permanently pinned in system memory. Using a shadow buffer for the console solves this problem. The console emulation will pin the buffer object only during updates from the shadow buffer. Otherwise, the bochs driver can freely relocated the buffer between system memory and video ram. v2: * select shadow FB via struct drm_mode_config.prefer_shadow_fbdev Signed-off-by: Thomas Zimmermann Acked-by: Noralf Trønnes Link: https://patchwork.freedesktop.org/patch/315833/ Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/bochs/bochs_kms.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/bochs/bochs_kms.c b/drivers/gpu/drm/bochs/bochs_kms.c index bc19dbd531ef..359030d5d818 100644 --- a/drivers/gpu/drm/bochs/bochs_kms.c +++ b/drivers/gpu/drm/bochs/bochs_kms.c @@ -191,6 +191,7 @@ int bochs_kms_init(struct bochs_device *bochs) bochs->dev->mode_config.fb_base = bochs->fb_base; bochs->dev->mode_config.preferred_depth = 24; bochs->dev->mode_config.prefer_shadow = 0; + bochs->dev->mode_config.prefer_shadow_fbdev = 1; bochs->dev->mode_config.quirk_addfb_prefer_host_byte_order = true; bochs->dev->mode_config.funcs = &bochs_mode_funcs; -- cgit From 811ba489fa524ec634933cdf83aaf6c007a4c004 Mon Sep 17 00:00:00 2001 From: Nishka Dasgupta Date: Wed, 24 Jul 2019 14:02:31 +0530 Subject: regulator: of: Add of_node_put() before return in function The local variable search in regulator_of_get_init_node takes the value returned by either of_get_child_by_name or of_node_get, both of which get a node. If this node is not put before returning, it could cause a memory leak. Hence put search before a mid-loop return statement. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta Link: https://lore.kernel.org/r/20190724083231.10276-1-nishkadg.linux@gmail.com Signed-off-by: Mark Brown --- drivers/regulator/of_regulator.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 397918ebba55..9112faa6a9a0 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -416,8 +416,10 @@ device_node *regulator_of_get_init_node(struct device *dev, if (!name) name = child->name; - if (!strcmp(desc->of_match, name)) + if (!strcmp(desc->of_match, name)) { + of_node_put(search); return of_node_get(child); + } } of_node_put(search); -- cgit From 677379bc9139ac24b310a281fcb21a2f04288353 Mon Sep 17 00:00:00 2001 From: Julien Thierry Date: Mon, 29 Jul 2019 15:57:46 +0100 Subject: arm64: Lower priority mask for GIC_PRIO_IRQON On a system with two security states, if SCR_EL3.FIQ is cleared, non-secure IRQ priorities get shifted to fit the secure view but priority masks aren't. On such system, it turns out that GIC_PRIO_IRQON masks the priority of normal interrupts, which obviously ends up in a hang. Increase GIC_PRIO_IRQON value (i.e. lower priority) to make sure interrupts are not blocked by it. Cc: Oleg Nesterov Fixes: bd82d4bd21880b7c ("arm64: Fix incorrect irqflag restore for priority masking") Acked-by: Marc Zyngier Signed-off-by: Julien Thierry Signed-off-by: Catalin Marinas [will: fixed Fixes: tag] Signed-off-by: Will Deacon --- arch/arm64/include/asm/arch_gicv3.h | 6 ++++++ arch/arm64/include/asm/ptrace.h | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h index 79155a8cfe7c..89e4c8b79349 100644 --- a/arch/arm64/include/asm/arch_gicv3.h +++ b/arch/arm64/include/asm/arch_gicv3.h @@ -155,6 +155,12 @@ static inline void gic_pmr_mask_irqs(void) BUILD_BUG_ON(GICD_INT_DEF_PRI < (GIC_PRIO_IRQOFF | GIC_PRIO_PSR_I_SET)); BUILD_BUG_ON(GICD_INT_DEF_PRI >= GIC_PRIO_IRQON); + /* + * Need to make sure IRQON allows IRQs when SCR_EL3.FIQ is cleared + * and non-secure PMR accesses are not subject to the shifts that + * are applied to IRQ priorities + */ + BUILD_BUG_ON((0x80 | (GICD_INT_DEF_PRI >> 1)) >= GIC_PRIO_IRQON); gic_write_pmr(GIC_PRIO_IRQOFF); } diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index b1dd039023ef..1dcf63a9ac1f 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -30,7 +30,7 @@ * in the the priority mask, it indicates that PSR.I should be set and * interrupt disabling temporarily does not rely on IRQ priorities. */ -#define GIC_PRIO_IRQON 0xc0 +#define GIC_PRIO_IRQON 0xe0 #define GIC_PRIO_IRQOFF (GIC_PRIO_IRQON & ~0x80) #define GIC_PRIO_PSR_I_SET (1 << 4) -- cgit From ee07b93e7721ccd5d5b9fa6f0c10cb3fe2f1f4f9 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 25 Jul 2019 17:16:05 +0900 Subject: arm64: unwind: Prohibit probing on return_address() Prohibit probing on return_address() and subroutines which is called from return_address(), since the it is invoked from trace_hardirqs_off() which is also kprobe blacklisted. Reported-by: Naresh Kamboju Signed-off-by: Masami Hiramatsu Signed-off-by: Will Deacon --- arch/arm64/kernel/return_address.c | 3 +++ arch/arm64/kernel/stacktrace.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/arch/arm64/kernel/return_address.c b/arch/arm64/kernel/return_address.c index c4ae647d2306..a5e8b3b9d798 100644 --- a/arch/arm64/kernel/return_address.c +++ b/arch/arm64/kernel/return_address.c @@ -8,6 +8,7 @@ #include #include +#include #include #include @@ -29,6 +30,7 @@ static int save_return_addr(struct stackframe *frame, void *d) return 0; } } +NOKPROBE_SYMBOL(save_return_addr); void *return_address(unsigned int level) { @@ -49,3 +51,4 @@ void *return_address(unsigned int level) return NULL; } EXPORT_SYMBOL_GPL(return_address); +NOKPROBE_SYMBOL(return_address); diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c index 2b160ae594eb..a336cb124320 100644 --- a/arch/arm64/kernel/stacktrace.c +++ b/arch/arm64/kernel/stacktrace.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include @@ -111,6 +112,7 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame) return 0; } +NOKPROBE_SYMBOL(unwind_frame); void notrace walk_stackframe(struct task_struct *tsk, struct stackframe *frame, int (*fn)(struct stackframe *, void *), void *data) @@ -125,6 +127,7 @@ void notrace walk_stackframe(struct task_struct *tsk, struct stackframe *frame, break; } } +NOKPROBE_SYMBOL(walk_stackframe); #ifdef CONFIG_STACKTRACE struct stack_trace_data { -- cgit From 760d8ed069c4e32a92e2ba251a3b0d9a87a3e771 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 25 Jul 2019 17:16:25 +0900 Subject: arm64: Remove unneeded rcu_read_lock from debug handlers Remove rcu_read_lock()/rcu_read_unlock() from debug exception handlers since we are sure those are not preemptible and interrupts are off. Acked-by: Paul E. McKenney Signed-off-by: Masami Hiramatsu Signed-off-by: Will Deacon --- arch/arm64/kernel/debug-monitors.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index f8719bd30850..48222a4760c2 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -207,16 +207,16 @@ static int call_step_hook(struct pt_regs *regs, unsigned int esr) list = user_mode(regs) ? &user_step_hook : &kernel_step_hook; - rcu_read_lock(); - + /* + * Since single-step exception disables interrupt, this function is + * entirely not preemptible, and we can use rcu list safely here. + */ list_for_each_entry_rcu(hook, list, node) { retval = hook->fn(regs, esr); if (retval == DBG_HOOK_HANDLED) break; } - rcu_read_unlock(); - return retval; } NOKPROBE_SYMBOL(call_step_hook); @@ -305,14 +305,16 @@ static int call_break_hook(struct pt_regs *regs, unsigned int esr) list = user_mode(regs) ? &user_break_hook : &kernel_break_hook; - rcu_read_lock(); + /* + * Since brk exception disables interrupt, this function is + * entirely not preemptible, and we can use rcu list safely here. + */ list_for_each_entry_rcu(hook, list, node) { unsigned int comment = esr & ESR_ELx_BRK64_ISS_COMMENT_MASK; if ((comment & ~hook->mask) == hook->imm) fn = hook->fn; } - rcu_read_unlock(); return fn ? fn(regs, esr) : DBG_HOOK_ERROR; } -- cgit From 7d4e2dcf311d3b98421d1f119efe5964cafa32fc Mon Sep 17 00:00:00 2001 From: Qian Cai Date: Wed, 31 Jul 2019 16:05:45 -0400 Subject: arm64/mm: fix variable 'pud' set but not used GCC throws a warning, arch/arm64/mm/mmu.c: In function 'pud_free_pmd_page': arch/arm64/mm/mmu.c:1033:8: warning: variable 'pud' set but not used [-Wunused-but-set-variable] pud_t pud; ^~~ because pud_table() is a macro and compiled away. Fix it by making it a static inline function and for pud_sect() as well. Signed-off-by: Qian Cai Signed-off-by: Will Deacon --- arch/arm64/include/asm/pgtable.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 3f5461f7b560..5fdcfe237338 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -447,8 +447,8 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, PMD_TYPE_SECT) #if defined(CONFIG_ARM64_64K_PAGES) || CONFIG_PGTABLE_LEVELS < 3 -#define pud_sect(pud) (0) -#define pud_table(pud) (1) +static inline bool pud_sect(pud_t pud) { return false; } +static inline bool pud_table(pud_t pud) { return true; } #else #define pud_sect(pud) ((pud_val(pud) & PUD_TYPE_MASK) == \ PUD_TYPE_SECT) -- cgit From 2bab52af6fe68c43b327a57e5ce5fc10eefdfadf Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Fri, 31 May 2019 05:46:15 -0400 Subject: drm/msm: add support for per-CRTC max_vblank_count on mdp5 The mdp5 drm/kms driver currently does not work on command-mode DSI panels due to 'vblank wait timed out' errors. This causes a latency of seconds, or tens of seconds in some cases, before content is shown on the panel. This hardware does not have the something that we can use as a frame counter available when running in command mode, so we need to fall back to using timestamps by setting the max_vblank_count to zero. This can be done on a per-CRTC basis, so the convert mdp5 to use drm_crtc_set_max_vblank_count(). This change was tested on a LG Nexus 5 (hammerhead) phone. Suggested-by: Jeffrey Hugo Reviewed-by: Jeffrey Hugo Signed-off-by: Brian Masney Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20190531094619.31704-3-masneyb@onstation.org --- drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c | 16 +++++++++++++++- drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c | 2 +- 2 files changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c index ff14555372d0..78d5fa230c16 100644 --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_crtc.c @@ -439,6 +439,18 @@ static void mdp5_crtc_atomic_disable(struct drm_crtc *crtc, mdp5_crtc->enabled = false; } +static void mdp5_crtc_vblank_on(struct drm_crtc *crtc) +{ + struct mdp5_crtc_state *mdp5_cstate = to_mdp5_crtc_state(crtc->state); + struct mdp5_interface *intf = mdp5_cstate->pipeline.intf; + u32 count; + + count = intf->mode == MDP5_INTF_DSI_MODE_COMMAND ? 0 : 0xffffffff; + drm_crtc_set_max_vblank_count(crtc, count); + + drm_crtc_vblank_on(crtc); +} + static void mdp5_crtc_atomic_enable(struct drm_crtc *crtc, struct drm_crtc_state *old_state) { @@ -475,7 +487,7 @@ static void mdp5_crtc_atomic_enable(struct drm_crtc *crtc, } /* Restore vblank irq handling after power is enabled */ - drm_crtc_vblank_on(crtc); + mdp5_crtc_vblank_on(crtc); mdp5_crtc_mode_set_nofb(crtc); @@ -1028,6 +1040,8 @@ static void mdp5_crtc_reset(struct drm_crtc *crtc) mdp5_crtc_destroy_state(crtc, crtc->state); __drm_atomic_helper_crtc_reset(crtc, &mdp5_cstate->base); + + drm_crtc_vblank_reset(crtc); } static const struct drm_crtc_funcs mdp5_crtc_funcs = { diff --git a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c index 4a60f5fca6b0..fec6ef1ae3b9 100644 --- a/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c +++ b/drivers/gpu/drm/msm/disp/mdp5/mdp5_kms.c @@ -740,7 +740,7 @@ struct msm_kms *mdp5_kms_init(struct drm_device *dev) dev->driver->get_vblank_timestamp = drm_calc_vbltimestamp_from_scanoutpos; dev->driver->get_scanout_position = mdp5_get_scanoutpos; dev->driver->get_vblank_counter = mdp5_get_vblank_counter; - dev->max_vblank_count = 0xffffffff; + dev->max_vblank_count = 0; /* max_vblank_count is set on each CRTC */ dev->vblank_disable_immediate = true; return kms; -- cgit From c14b5dce5ece48035cfd0aa951b39c69ad5056f4 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Thu, 25 Jul 2019 10:53:08 -0600 Subject: drm/msm: Annotate intentional switch statement fall throughs Explicitly mark intentional fall throughs in switch statements to keep -Wimplicit-fallthrough from complaining. Reviewed-by: Rob Clark Signed-off-by: Jordan Crouse Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/1564073588-27386-1-git-send-email-jcrouse@codeaurora.org --- drivers/gpu/drm/msm/adreno/a5xx_gpu.c | 2 ++ drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 1 + drivers/gpu/drm/msm/adreno/adreno_gpu.c | 1 + 3 files changed, 4 insertions(+) diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c index 1671db47aa57..e9c55d1d6c04 100644 --- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c @@ -59,6 +59,7 @@ static void a5xx_submit_in_rb(struct msm_gpu *gpu, struct msm_gem_submit *submit case MSM_SUBMIT_CMD_CTX_RESTORE_BUF: if (priv->lastctx == ctx) break; + /* fall-thru */ case MSM_SUBMIT_CMD_BUF: /* copy commands into RB: */ obj = submit->bos[submit->cmd[i].idx].obj; @@ -149,6 +150,7 @@ static void a5xx_submit(struct msm_gpu *gpu, struct msm_gem_submit *submit, case MSM_SUBMIT_CMD_CTX_RESTORE_BUF: if (priv->lastctx == ctx) break; + /* fall-thru */ case MSM_SUBMIT_CMD_BUF: OUT_PKT7(ring, CP_INDIRECT_BUFFER_PFE, 3); OUT_RING(ring, lower_32_bits(submit->cmd[i].iova)); diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index be39cf01e51e..dc8ec2c94301 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -115,6 +115,7 @@ static void a6xx_submit(struct msm_gpu *gpu, struct msm_gem_submit *submit, case MSM_SUBMIT_CMD_CTX_RESTORE_BUF: if (priv->lastctx == ctx) break; + /* fall-thru */ case MSM_SUBMIT_CMD_BUF: OUT_PKT7(ring, CP_INDIRECT_BUFFER_PFE, 3); OUT_RING(ring, lower_32_bits(submit->cmd[i].iova)); diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c index 9acbbc0f3232..048c8be426f3 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c @@ -428,6 +428,7 @@ void adreno_submit(struct msm_gpu *gpu, struct msm_gem_submit *submit, /* ignore if there has not been a ctx switch: */ if (priv->lastctx == ctx) break; + /* fall-thru */ case MSM_SUBMIT_CMD_BUF: OUT_PKT3(ring, adreno_is_a430(adreno_gpu) ? CP_INDIRECT_BUFFER_PFE : CP_INDIRECT_BUFFER_PFD, 2); -- cgit From 6bbfe4e602691b90ac866712bd4c43c51e546a60 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Thu, 1 Aug 2019 16:26:42 +0200 Subject: perf bench numa: Fix cpu0 binding Michael reported an issue with perf bench numa failing with binding to cpu0 with '-0' option. # perf bench numa mem -p 3 -t 1 -P 512 -s 100 -zZcm0 --thp 1 -M 1 -ddd # Running 'numa/mem' benchmark: # Running main, "perf bench numa numa-mem -p 3 -t 1 -P 512 -s 100 -zZcm0 --thp 1 -M 1 -ddd" binding to node 0, mask: 0000000000000001 => -1 perf: bench/numa.c:356: bind_to_memnode: Assertion `!(ret)' failed. Aborted (core dumped) This happens when the cpu0 is not part of node0, which is the benchmark assumption and we can see that's not the case for some powerpc servers. Using correct node for cpu0 binding. Reported-by: Michael Petlan Signed-off-by: Jiri Olsa Cc: Alexander Shishkin Cc: Andi Kleen Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Satheesh Rajendran Link: http://lkml.kernel.org/r/20190801142642.28004-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/bench/numa.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/perf/bench/numa.c b/tools/perf/bench/numa.c index a640ca7aaada..513cb2f2fa32 100644 --- a/tools/perf/bench/numa.c +++ b/tools/perf/bench/numa.c @@ -379,8 +379,10 @@ static u8 *alloc_data(ssize_t bytes0, int map_flags, /* Allocate and initialize all memory on CPU#0: */ if (init_cpu0) { - orig_mask = bind_to_node(0); - bind_to_memnode(0); + int node = numa_node_of_cpu(0); + + orig_mask = bind_to_node(node); + bind_to_memnode(node); } bytes = bytes0 + HPSIZE; -- cgit From 7732d20a160c76006c7fe7bca5178aea6af1d2e8 Mon Sep 17 00:00:00 2001 From: Qian Cai Date: Thu, 1 Aug 2019 10:47:05 -0400 Subject: arm64/mm: fix variable 'tag' set but not used When CONFIG_KASAN_SW_TAGS=n, set_tag() is compiled away. GCC throws a warning, mm/kasan/common.c: In function '__kasan_kmalloc': mm/kasan/common.c:464:5: warning: variable 'tag' set but not used [-Wunused-but-set-variable] u8 tag = 0xff; ^~~ Fix it by making __tag_set() a static inline function the same as arch_kasan_set_tag() in mm/kasan/kasan.h for consistency because there is a macro in arch/arm64/include/asm/kasan.h, #define arch_kasan_set_tag(addr, tag) __tag_set(addr, tag) However, when CONFIG_DEBUG_VIRTUAL=n and CONFIG_SPARSEMEM_VMEMMAP=y, page_to_virt() will call __tag_set() with incorrect type of a parameter, so fix that as well. Also, still let page_to_virt() return "void *" instead of "const void *", so will not need to add a similar cast in lowmem_page_address(). Signed-off-by: Qian Cai Signed-off-by: Will Deacon --- arch/arm64/include/asm/memory.h | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index b7ba75809751..fb04f10a78ab 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -210,7 +210,11 @@ extern u64 vabits_user; #define __tag_reset(addr) untagged_addr(addr) #define __tag_get(addr) (__u8)((u64)(addr) >> 56) #else -#define __tag_set(addr, tag) (addr) +static inline const void *__tag_set(const void *addr, u8 tag) +{ + return addr; +} + #define __tag_reset(addr) (addr) #define __tag_get(addr) 0 #endif @@ -301,8 +305,8 @@ static inline void *phys_to_virt(phys_addr_t x) #define page_to_virt(page) ({ \ unsigned long __addr = \ ((__page_to_voff(page)) | PAGE_OFFSET); \ - unsigned long __addr_tag = \ - __tag_set(__addr, page_kasan_tag(page)); \ + const void *__addr_tag = \ + __tag_set((void *)__addr, page_kasan_tag(page)); \ ((void *)__addr_tag); \ }) -- cgit From 61f259821dd3306e49b7d42a3f90fb5a4ff3351b Mon Sep 17 00:00:00 2001 From: "Luck, Tony" Date: Tue, 30 Jul 2019 21:39:57 -0700 Subject: IB/core: Add mitigation for Spectre V1 Some processors may mispredict an array bounds check and speculatively access memory that they should not. With a user supplied array index we like to play things safe by masking the value with the array size before it is used as an index. Signed-off-by: Tony Luck Link: https://lore.kernel.org/r/20190731043957.GA1600@agluck-desk2.amr.corp.intel.com Signed-off-by: Doug Ledford --- drivers/infiniband/core/user_mad.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index 9f8a48016b41..ffdeaf6e0b68 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -49,6 +49,7 @@ #include #include #include +#include #include @@ -884,11 +885,14 @@ static int ib_umad_unreg_agent(struct ib_umad_file *file, u32 __user *arg) if (get_user(id, arg)) return -EFAULT; + if (id >= IB_UMAD_MAX_AGENTS) + return -EINVAL; mutex_lock(&file->port->file_mutex); mutex_lock(&file->mutex); - if (id >= IB_UMAD_MAX_AGENTS || !__get_agent(file, id)) { + id = array_index_nospec(id, IB_UMAD_MAX_AGENTS); + if (!__get_agent(file, id)) { ret = -EINVAL; goto out; } -- cgit From 621e55ff5b8e0ab5d1063f0eae0ef3960bef8f6e Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 31 Jul 2019 11:18:40 +0300 Subject: RDMA/devices: Do not deadlock during client removal lockdep reports: WARNING: possible circular locking dependency detected modprobe/302 is trying to acquire lock: 0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990 but task is already holding lock: 000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: remove_client_context+0x79/0xd0 [ib_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&device->client_data_rwsem){++++}: down_read+0x3f/0x160 ib_get_net_dev_by_params+0xd5/0x200 [ib_core] cma_ib_req_handler+0x5f6/0x2090 [rdma_cm] cm_process_work+0x29/0x110 [ib_cm] cm_req_handler+0x10f5/0x1c00 [ib_cm] cm_work_handler+0x54c/0x311d [ib_cm] process_one_work+0x4aa/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #1 ((work_completion)(&(&work->work)->work)){+.+.}: process_one_work+0x45f/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #0 ((wq_completion)ib_cm){+.+.}: lock_acquire+0xc8/0x1d0 flush_workqueue+0x102/0x990 cm_remove_one+0x30e/0x3c0 [ib_cm] remove_client_context+0x94/0xd0 [ib_core] disable_device+0x10a/0x1f0 [ib_core] __ib_unregister_device+0x5a/0xe0 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib] __mlx5_ib_remove+0x3d/0x70 [mlx5_ib] mlx5_ib_remove+0x12e/0x140 [mlx5_ib] mlx5_remove_device+0x144/0x150 [mlx5_core] mlx5_unregister_interface+0x3f/0xf0 [mlx5_core] mlx5_ib_cleanup+0x10/0x3a [mlx5_ib] __x64_sys_delete_module+0x227/0x350 do_syscall_64+0xc3/0x6a4 entry_SYSCALL_64_after_hwframe+0x49/0xbe Which is due to the read side of the client_data_rwsem being obtained recursively through a work queue flush during cm client removal. The lock is being held across the remove in remove_client_context() so that the function is a fence, once it returns the client is removed. This is required so that the two callers do not proceed with destruction until the client completes removal. Instead of using client_data_rwsem use the existing device unregistration refcount and add a similar client unregistration (client->uses) refcount. This will fence the two unregistration paths without holding any locks. Cc: Fixes: 921eab1143aa ("RDMA/devices: Re-organize device.c locking") Signed-off-by: Jason Gunthorpe Signed-off-by: Leon Romanovsky Link: https://lore.kernel.org/r/20190731081841.32345-2-leon@kernel.org Signed-off-by: Doug Ledford --- drivers/infiniband/core/device.c | 54 ++++++++++++++++++++++++++++++---------- include/rdma/ib_verbs.h | 3 +++ 2 files changed, 44 insertions(+), 13 deletions(-) diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index 9773145dee09..d86fbabe48d6 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -99,6 +99,12 @@ static LIST_HEAD(client_list); static DEFINE_XARRAY_FLAGS(clients, XA_FLAGS_ALLOC); static DECLARE_RWSEM(clients_rwsem); +static void ib_client_put(struct ib_client *client) +{ + if (refcount_dec_and_test(&client->uses)) + complete(&client->uses_zero); +} + /* * If client_data is registered then the corresponding client must also still * be registered. @@ -660,6 +666,14 @@ static int add_client_context(struct ib_device *device, return 0; down_write(&device->client_data_rwsem); + /* + * So long as the client is registered hold both the client and device + * unregistration locks. + */ + if (!refcount_inc_not_zero(&client->uses)) + goto out_unlock; + refcount_inc(&device->refcount); + /* * Another caller to add_client_context got here first and has already * completely initialized context. @@ -683,6 +697,9 @@ static int add_client_context(struct ib_device *device, return 0; out: + ib_device_put(device); + ib_client_put(client); +out_unlock: up_write(&device->client_data_rwsem); return ret; } @@ -702,7 +719,7 @@ static void remove_client_context(struct ib_device *device, client_data = xa_load(&device->client_data, client_id); xa_clear_mark(&device->client_data, client_id, CLIENT_DATA_REGISTERED); client = xa_load(&clients, client_id); - downgrade_write(&device->client_data_rwsem); + up_write(&device->client_data_rwsem); /* * Notice we cannot be holding any exclusive locks when calling the @@ -712,17 +729,13 @@ static void remove_client_context(struct ib_device *device, * * For this reason clients and drivers should not call the * unregistration functions will holdling any locks. - * - * It tempting to drop the client_data_rwsem too, but this is required - * to ensure that unregister_client does not return until all clients - * are completely unregistered, which is required to avoid module - * unloading races. */ if (client->remove) client->remove(device, client_data); xa_erase(&device->client_data, client_id); - up_read(&device->client_data_rwsem); + ib_device_put(device); + ib_client_put(client); } static int alloc_port_data(struct ib_device *device) @@ -1705,6 +1718,8 @@ int ib_register_client(struct ib_client *client) unsigned long index; int ret; + refcount_set(&client->uses, 1); + init_completion(&client->uses_zero); ret = assign_client_id(client); if (ret) return ret; @@ -1740,16 +1755,29 @@ void ib_unregister_client(struct ib_client *client) unsigned long index; down_write(&clients_rwsem); + ib_client_put(client); xa_clear_mark(&clients, client->client_id, CLIENT_REGISTERED); up_write(&clients_rwsem); + + /* We do not want to have locks while calling client->remove() */ + rcu_read_lock(); + xa_for_each (&devices, index, device) { + if (!ib_device_try_get(device)) + continue; + rcu_read_unlock(); + + remove_client_context(device, client->client_id); + + ib_device_put(device); + rcu_read_lock(); + } + rcu_read_unlock(); + /* - * Every device still known must be serialized to make sure we are - * done with the client callbacks before we return. + * remove_client_context() is not a fence, it can return even though a + * removal is ongoing. Wait until all removals are completed. */ - down_read(&devices_rwsem); - xa_for_each (&devices, index, device) - remove_client_context(device, client->client_id); - up_read(&devices_rwsem); + wait_for_completion(&client->uses_zero); down_write(&clients_rwsem); list_del(&client->list); diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index c5f8a9f17063..7b80ec822043 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -2647,6 +2647,9 @@ struct ib_client { const union ib_gid *gid, const struct sockaddr *addr, void *client_data); + + refcount_t uses; + struct completion uses_zero; struct list_head list; u32 client_id; -- cgit From 9cd5881719e9555cae300ec8b389eda3c8101339 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 31 Jul 2019 11:18:41 +0300 Subject: RDMA/devices: Remove the lock around remove_client_context Due to the complexity of client->remove() callbacks it is desirable to not hold any locks while calling them. Remove the last one by tracking only the highest client ID and running backwards from there over the xarray. Since the only purpose of that lock was to protect the linked list, we can drop the lock. Signed-off-by: Jason Gunthorpe Signed-off-by: Leon Romanovsky Link: https://lore.kernel.org/r/20190731081841.32345-3-leon@kernel.org Signed-off-by: Doug Ledford --- drivers/infiniband/core/device.c | 48 ++++++++++++++++++++++------------------ include/rdma/ib_verbs.h | 1 - 2 files changed, 27 insertions(+), 22 deletions(-) diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c index d86fbabe48d6..ea8661a00651 100644 --- a/drivers/infiniband/core/device.c +++ b/drivers/infiniband/core/device.c @@ -94,7 +94,7 @@ static DEFINE_XARRAY_FLAGS(devices, XA_FLAGS_ALLOC); static DECLARE_RWSEM(devices_rwsem); #define DEVICE_REGISTERED XA_MARK_1 -static LIST_HEAD(client_list); +static u32 highest_client_id; #define CLIENT_REGISTERED XA_MARK_1 static DEFINE_XARRAY_FLAGS(clients, XA_FLAGS_ALLOC); static DECLARE_RWSEM(clients_rwsem); @@ -1237,7 +1237,7 @@ static int setup_device(struct ib_device *device) static void disable_device(struct ib_device *device) { - struct ib_client *client; + u32 cid; WARN_ON(!refcount_read(&device->refcount)); @@ -1245,10 +1245,19 @@ static void disable_device(struct ib_device *device) xa_clear_mark(&devices, device->index, DEVICE_REGISTERED); up_write(&devices_rwsem); + /* + * Remove clients in LIFO order, see assign_client_id. This could be + * more efficient if xarray learns to reverse iterate. Since no new + * clients can be added to this ib_device past this point we only need + * the maximum possible client_id value here. + */ down_read(&clients_rwsem); - list_for_each_entry_reverse(client, &client_list, list) - remove_client_context(device, client->client_id); + cid = highest_client_id; up_read(&clients_rwsem); + while (cid) { + cid--; + remove_client_context(device, cid); + } /* Pairs with refcount_set in enable_device */ ib_device_put(device); @@ -1675,30 +1684,31 @@ static int assign_client_id(struct ib_client *client) /* * The add/remove callbacks must be called in FIFO/LIFO order. To * achieve this we assign client_ids so they are sorted in - * registration order, and retain a linked list we can reverse iterate - * to get the LIFO order. The extra linked list can go away if xarray - * learns to reverse iterate. + * registration order. */ - if (list_empty(&client_list)) { - client->client_id = 0; - } else { - struct ib_client *last; - - last = list_last_entry(&client_list, struct ib_client, list); - client->client_id = last->client_id + 1; - } + client->client_id = highest_client_id; ret = xa_insert(&clients, client->client_id, client, GFP_KERNEL); if (ret) goto out; + highest_client_id++; xa_set_mark(&clients, client->client_id, CLIENT_REGISTERED); - list_add_tail(&client->list, &client_list); out: up_write(&clients_rwsem); return ret; } +static void remove_client_id(struct ib_client *client) +{ + down_write(&clients_rwsem); + xa_erase(&clients, client->client_id); + for (; highest_client_id; highest_client_id--) + if (xa_load(&clients, highest_client_id - 1)) + break; + up_write(&clients_rwsem); +} + /** * ib_register_client - Register an IB client * @client:Client to register @@ -1778,11 +1788,7 @@ void ib_unregister_client(struct ib_client *client) * removal is ongoing. Wait until all removals are completed. */ wait_for_completion(&client->uses_zero); - - down_write(&clients_rwsem); - list_del(&client->list); - xa_erase(&clients, client->client_id); - up_write(&clients_rwsem); + remove_client_id(client); } EXPORT_SYMBOL(ib_unregister_client); diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 7b80ec822043..4f225175cb91 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -2650,7 +2650,6 @@ struct ib_client { refcount_t uses; struct completion uses_zero; - struct list_head list; u32 client_id; /* kverbs are not required by the client */ -- cgit From e5366d309a772fef264ec85e858f9ea46f939848 Mon Sep 17 00:00:00 2001 From: Guy Levi Date: Wed, 31 Jul 2019 11:19:29 +0300 Subject: IB/mlx5: Fix MR registration flow to use UMR properly Driver shouldn't allow to use UMR to register a MR when umr_modify_atomic_disabled is set. Otherwise it will always end up with a failure in the post send flow which sets the UMR WQE to modify atomic access right. Fixes: c8d75a980fab ("IB/mlx5: Respect new UMR capabilities") Signed-off-by: Guy Levi Reviewed-by: Moni Shoua Signed-off-by: Leon Romanovsky Link: https://lore.kernel.org/r/20190731081929.32559-1-leon@kernel.org Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/mr.c | 27 +++++++++------------------ 1 file changed, 9 insertions(+), 18 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index 2c77456f359f..b74fad08412f 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -51,22 +51,12 @@ static void clean_mr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr); static void dereg_mr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr); static int mr_cache_max_order(struct mlx5_ib_dev *dev); static int unreg_umr(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr); -static bool umr_can_modify_entity_size(struct mlx5_ib_dev *dev) -{ - return !MLX5_CAP_GEN(dev->mdev, umr_modify_entity_size_disabled); -} static bool umr_can_use_indirect_mkey(struct mlx5_ib_dev *dev) { return !MLX5_CAP_GEN(dev->mdev, umr_indirect_mkey_disabled); } -static bool use_umr(struct mlx5_ib_dev *dev, int order) -{ - return order <= mr_cache_max_order(dev) && - umr_can_modify_entity_size(dev); -} - static int destroy_mkey(struct mlx5_ib_dev *dev, struct mlx5_ib_mr *mr) { int err = mlx5_core_destroy_mkey(dev->mdev, &mr->mmkey); @@ -1271,7 +1261,7 @@ struct ib_mr *mlx5_ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length, { struct mlx5_ib_dev *dev = to_mdev(pd->device); struct mlx5_ib_mr *mr = NULL; - bool populate_mtts = false; + bool use_umr; struct ib_umem *umem; int page_shift; int npages; @@ -1303,29 +1293,30 @@ struct ib_mr *mlx5_ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length, if (err < 0) return ERR_PTR(err); - if (use_umr(dev, order)) { + use_umr = !MLX5_CAP_GEN(dev->mdev, umr_modify_entity_size_disabled) && + (!MLX5_CAP_GEN(dev->mdev, umr_modify_atomic_disabled) || + !MLX5_CAP_GEN(dev->mdev, atomic)); + + if (order <= mr_cache_max_order(dev) && use_umr) { mr = alloc_mr_from_cache(pd, umem, virt_addr, length, ncont, page_shift, order, access_flags); if (PTR_ERR(mr) == -EAGAIN) { mlx5_ib_dbg(dev, "cache empty for order %d\n", order); mr = NULL; } - populate_mtts = false; } else if (!MLX5_CAP_GEN(dev->mdev, umr_extended_translation_offset)) { if (access_flags & IB_ACCESS_ON_DEMAND) { err = -EINVAL; pr_err("Got MR registration for ODP MR > 512MB, not supported for Connect-IB\n"); goto error; } - populate_mtts = true; + use_umr = false; } if (!mr) { - if (!umr_can_modify_entity_size(dev)) - populate_mtts = true; mutex_lock(&dev->slow_path_mutex); mr = reg_create(NULL, pd, virt_addr, length, umem, ncont, - page_shift, access_flags, populate_mtts); + page_shift, access_flags, !use_umr); mutex_unlock(&dev->slow_path_mutex); } @@ -1341,7 +1332,7 @@ struct ib_mr *mlx5_ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length, update_odp_mr(mr); - if (!populate_mtts) { + if (use_umr) { int update_xlt_flags = MLX5_IB_UPD_XLT_ENABLE; if (access_flags & IB_ACCESS_ON_DEMAND) -- cgit From 52e0a118a20308dd6aa531e20a5ab5907d2264c8 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Thu, 1 Aug 2019 13:43:54 +0300 Subject: RDMA/restrack: Track driver QP types in resource tracker The check for QP type different than XRC has excluded driver QP types from the resource tracker. As a result, "rdma resource show" user command would not show opened driver QPs which does not reflect the real state of the system. Check QP type explicitly instead of assuming enum values/ordering. Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation") Signed-off-by: Gal Pressman Reviewed-by: Leon Romanovsky Link: https://lore.kernel.org/r/20190801104354.11417-1-galpress@amazon.com Signed-off-by: Doug Ledford --- drivers/infiniband/core/core_priv.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/core/core_priv.h b/drivers/infiniband/core/core_priv.h index 888d89ce81df..beee7b7e0d9a 100644 --- a/drivers/infiniband/core/core_priv.h +++ b/drivers/infiniband/core/core_priv.h @@ -302,7 +302,9 @@ static inline struct ib_qp *_ib_create_qp(struct ib_device *dev, struct ib_udata *udata, struct ib_uobject *uobj) { + enum ib_qp_type qp_type = attr->qp_type; struct ib_qp *qp; + bool is_xrc; if (!dev->ops.create_qp) return ERR_PTR(-EOPNOTSUPP); @@ -320,7 +322,8 @@ static inline struct ib_qp *_ib_create_qp(struct ib_device *dev, * and more importantly they are created internaly by driver, * see mlx5 create_dev_resources() as an example. */ - if (attr->qp_type < IB_QPT_XRC_INI) { + is_xrc = qp_type == IB_QPT_XRC_INI || qp_type == IB_QPT_XRC_TGT; + if ((qp_type < IB_QPT_MAX && !is_xrc) || qp_type == IB_QPT_DRIVER) { qp->res.type = RDMA_RESTRACK_QP; if (uobj) rdma_restrack_uadd(&qp->res); -- cgit From 770b7d96cfff6a8bf6c9f261ba6f135dc9edf484 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Thu, 1 Aug 2019 15:14:49 +0300 Subject: IB/mad: Fix use-after-free in ib mad completion handling We encountered a use-after-free bug when unloading the driver: [ 3562.116059] BUG: KASAN: use-after-free in ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.117233] Read of size 4 at addr ffff8882ca5aa868 by task kworker/u13:2/23862 [ 3562.118385] [ 3562.119519] CPU: 2 PID: 23862 Comm: kworker/u13:2 Tainted: G OE 5.1.0-for-upstream-dbg-2019-05-19_16-44-30-13 #1 [ 3562.121806] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 3562.123075] Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] [ 3562.124383] Call Trace: [ 3562.125640] dump_stack+0x9a/0xeb [ 3562.126911] print_address_description+0xe3/0x2e0 [ 3562.128223] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.129545] __kasan_report+0x15c/0x1df [ 3562.130866] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.132174] kasan_report+0xe/0x20 [ 3562.133514] ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.134835] ? find_mad_agent+0xa00/0xa00 [ib_core] [ 3562.136158] ? qlist_free_all+0x51/0xb0 [ 3562.137498] ? mlx4_ib_sqp_comp_worker+0x1970/0x1970 [mlx4_ib] [ 3562.138833] ? quarantine_reduce+0x1fa/0x270 [ 3562.140171] ? kasan_unpoison_shadow+0x30/0x40 [ 3562.141522] ib_mad_recv_done+0xdf6/0x3000 [ib_core] [ 3562.142880] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 3562.144277] ? ib_mad_send_done+0x1810/0x1810 [ib_core] [ 3562.145649] ? mlx4_ib_destroy_cq+0x2a0/0x2a0 [mlx4_ib] [ 3562.147008] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 3562.148380] ? debug_object_deactivate+0x2b9/0x4a0 [ 3562.149814] __ib_process_cq+0xe2/0x1d0 [ib_core] [ 3562.151195] ib_cq_poll_work+0x45/0xf0 [ib_core] [ 3562.152577] process_one_work+0x90c/0x1860 [ 3562.153959] ? pwq_dec_nr_in_flight+0x320/0x320 [ 3562.155320] worker_thread+0x87/0xbb0 [ 3562.156687] ? __kthread_parkme+0xb6/0x180 [ 3562.158058] ? process_one_work+0x1860/0x1860 [ 3562.159429] kthread+0x320/0x3e0 [ 3562.161391] ? kthread_park+0x120/0x120 [ 3562.162744] ret_from_fork+0x24/0x30 ... [ 3562.187615] Freed by task 31682: [ 3562.188602] save_stack+0x19/0x80 [ 3562.189586] __kasan_slab_free+0x11d/0x160 [ 3562.190571] kfree+0xf5/0x2f0 [ 3562.191552] ib_mad_port_close+0x200/0x380 [ib_core] [ 3562.192538] ib_mad_remove_device+0xf0/0x230 [ib_core] [ 3562.193538] remove_client_context+0xa6/0xe0 [ib_core] [ 3562.194514] disable_device+0x14e/0x260 [ib_core] [ 3562.195488] __ib_unregister_device+0x79/0x150 [ib_core] [ 3562.196462] ib_unregister_device+0x21/0x30 [ib_core] [ 3562.197439] mlx4_ib_remove+0x162/0x690 [mlx4_ib] [ 3562.198408] mlx4_remove_device+0x204/0x2c0 [mlx4_core] [ 3562.199381] mlx4_unregister_interface+0x49/0x1d0 [mlx4_core] [ 3562.200356] mlx4_ib_cleanup+0xc/0x1d [mlx4_ib] [ 3562.201329] __x64_sys_delete_module+0x2d2/0x400 [ 3562.202288] do_syscall_64+0x95/0x470 [ 3562.203277] entry_SYSCALL_64_after_hwframe+0x49/0xbe The problem was that the MAD PD was deallocated before the MAD CQ. There was completion work pending for the CQ when the PD got deallocated. When the mad completion handling reached procedure ib_mad_post_receive_mads(), we got a use-after-free bug in the following line of code in that procedure: sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey; (the pd pointer in the above line is no longer valid, because the pd has been deallocated). We fix this by allocating the PD before the CQ in procedure ib_mad_port_open(), and deallocating the PD after freeing the CQ in procedure ib_mad_port_close(). Since the CQ completion work queue is flushed during ib_free_cq(), no completions will be pending for that CQ when the PD is later deallocated. Note that freeing the CQ before deallocating the PD is the practice in the ULPs. Fixes: 4be90bc60df4 ("IB/mad: Remove ib_get_dma_mr calls") Signed-off-by: Jack Morgenstein Signed-off-by: Leon Romanovsky Link: https://lore.kernel.org/r/20190801121449.24973-1-leon@kernel.org Signed-off-by: Doug Ledford --- drivers/infiniband/core/mad.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index cc99479b2c09..9947d16edef2 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -3224,18 +3224,18 @@ static int ib_mad_port_open(struct ib_device *device, if (has_smi) cq_size *= 2; + port_priv->pd = ib_alloc_pd(device, 0); + if (IS_ERR(port_priv->pd)) { + dev_err(&device->dev, "Couldn't create ib_mad PD\n"); + ret = PTR_ERR(port_priv->pd); + goto error3; + } + port_priv->cq = ib_alloc_cq(port_priv->device, port_priv, cq_size, 0, IB_POLL_UNBOUND_WORKQUEUE); if (IS_ERR(port_priv->cq)) { dev_err(&device->dev, "Couldn't create ib_mad CQ\n"); ret = PTR_ERR(port_priv->cq); - goto error3; - } - - port_priv->pd = ib_alloc_pd(device, 0); - if (IS_ERR(port_priv->pd)) { - dev_err(&device->dev, "Couldn't create ib_mad PD\n"); - ret = PTR_ERR(port_priv->pd); goto error4; } @@ -3278,11 +3278,11 @@ error8: error7: destroy_mad_qp(&port_priv->qp_info[0]); error6: - ib_dealloc_pd(port_priv->pd); -error4: ib_free_cq(port_priv->cq); cleanup_recv_queue(&port_priv->qp_info[1]); cleanup_recv_queue(&port_priv->qp_info[0]); +error4: + ib_dealloc_pd(port_priv->pd); error3: kfree(port_priv); @@ -3312,8 +3312,8 @@ static int ib_mad_port_close(struct ib_device *device, int port_num) destroy_workqueue(port_priv->wq); destroy_mad_qp(&port_priv->qp_info[1]); destroy_mad_qp(&port_priv->qp_info[0]); - ib_dealloc_pd(port_priv->pd); ib_free_cq(port_priv->cq); + ib_dealloc_pd(port_priv->pd); cleanup_recv_queue(&port_priv->qp_info[1]); cleanup_recv_queue(&port_priv->qp_info[0]); /* XXX: Handle deallocation of MAD registration tables */ -- cgit From 6497d0a9c53df6e98b25e2b79f2295d7caa47b6e Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 31 Jul 2019 12:54:28 -0500 Subject: IB/hfi1: Fix Spectre v1 vulnerability sl is controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. Fix this by sanitizing sl before using it to index ibp->sl_to_sc. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/ Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Link: https://lore.kernel.org/r/20190731175428.GA16736@embeddedor Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/verbs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/infiniband/hw/hfi1/verbs.c b/drivers/infiniband/hw/hfi1/verbs.c index c4b243f50c76..646f61545ed6 100644 --- a/drivers/infiniband/hw/hfi1/verbs.c +++ b/drivers/infiniband/hw/hfi1/verbs.c @@ -54,6 +54,7 @@ #include #include #include +#include #include "hfi.h" #include "common.h" @@ -1536,6 +1537,7 @@ static int hfi1_check_ah(struct ib_device *ibdev, struct rdma_ah_attr *ah_attr) sl = rdma_ah_get_sl(ah_attr); if (sl >= ARRAY_SIZE(ibp->sl_to_sc)) return -EINVAL; + sl = array_index_nospec(sl, ARRAY_SIZE(ibp->sl_to_sc)); sc5 = ibp->sl_to_sc[sl]; if (sc_to_vlt(dd, sc5) > num_vls && sc_to_vlt(dd, sc5) != 0xf) -- cgit From a29d56c2ed24ad33062bfdafdec9e34149715320 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 1 Aug 2019 10:55:12 +0300 Subject: usb: typec: ucsi: ccg: Fix uninitilized symbol error Fix smatch error: drivers/usb/typec/ucsi/ucsi_ccg.c:975 ccg_fw_update() error: uninitialized symbol 'err'. Fixes: 5c9ae5a87573 ("usb: typec: ucsi: ccg: add firmware flashing support") Cc: stable@vger.kernel.org Reported-by: kbuild test robot Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20190801075512.24354-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/ucsi/ucsi_ccg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c index f7a79a23ebed..8e9f8fba55af 100644 --- a/drivers/usb/typec/ucsi/ucsi_ccg.c +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c @@ -1018,7 +1018,7 @@ release_fw: ******************************************************************************/ static int ccg_fw_update(struct ucsi_ccg *uc, enum enum_flash_mode flash_mode) { - int err; + int err = 0; while (flash_mode != FLASH_NOT_NEEDED) { err = do_flash(uc, flash_mode); -- cgit From 23eaf3b5c1a755e3193480c76fb29414be648688 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Wed, 31 Jul 2019 11:38:52 +0300 Subject: RDMA/mlx5: Release locks during notifier unregister The below kernel panic was observed when created bond mode LACP with GRE tunnel on top. The reason to it was not released spinlock during mlx5 notify unregsiter sequence. [ 234.562007] BUG: scheduling while atomic: sh/10900/0x00000002 [ 234.563005] Preemption disabled at: [ 234.566864] ------------[ cut here ]------------ [ 234.567120] DEBUG_LOCKS_WARN_ON(val > preempt_count()) [ 234.567139] WARNING: CPU: 16 PID: 10900 at kernel/sched/core.c:3203 preempt_count_sub+0xca/0x170 [ 234.569550] CPU: 16 PID: 10900 Comm: sh Tainted: G W 5.2.0-rc1-for-linust-dbg-2019-05-25_04-57-33-60 #1 [ 234.569886] Hardware name: Dell Inc. PowerEdge R720/0X3D66, BIOS 2.6.1 02/12/2018 [ 234.570183] RIP: 0010:preempt_count_sub+0xca/0x170 [ 234.570404] Code: 03 38 d0 7c 08 84 d2 0f 85 b0 00 00 00 8b 15 dd 02 03 04 85 d2 75 ba 48 c7 c6 00 e1 88 83 48 c7 c7 40 e1 88 83 e8 76 11 f7 ff <0f> 0b 5b c3 65 8b 05 d3 1f d8 7e 84 c0 75 82 e8 62 c3 c3 00 85 c0 [ 234.570911] RSP: 0018:ffff888b94477b08 EFLAGS: 00010286 [ 234.571133] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 [ 234.571391] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000246 [ 234.571648] RBP: ffff888ba5560000 R08: fffffbfff08962d5 R09: fffffbfff08962d5 [ 234.571902] R10: 0000000000000001 R11: fffffbfff08962d4 R12: ffff888bac6e9548 [ 234.572157] R13: ffff888babfaf728 R14: ffff888bac6e9568 R15: ffff888babfaf750 [ 234.572412] FS: 00007fcafa59b740(0000) GS:ffff888bed200000(0000) knlGS:0000000000000000 [ 234.572686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 234.572914] CR2: 00007f984f16b140 CR3: 0000000b2bf0a001 CR4: 00000000001606e0 [ 234.573172] Call Trace: [ 234.573336] _raw_spin_unlock+0x2e/0x50 [ 234.573542] mlx5_ib_unbind_slave_port+0x1bc/0x690 [mlx5_ib] [ 234.573793] mlx5_ib_cleanup_multiport_master+0x1d3/0x660 [mlx5_ib] [ 234.574039] mlx5_ib_stage_init_cleanup+0x4c/0x360 [mlx5_ib] [ 234.574271] ? kfree+0xf5/0x2f0 [ 234.574465] __mlx5_ib_remove+0x61/0xd0 [mlx5_ib] [ 234.574688] ? __mlx5_ib_remove+0xd0/0xd0 [mlx5_ib] [ 234.574951] mlx5_remove_device+0x234/0x300 [mlx5_core] [ 234.575224] mlx5_unregister_device+0x4d/0x1e0 [mlx5_core] [ 234.575493] remove_one+0x4f/0x160 [mlx5_core] [ 234.575704] pci_device_remove+0xef/0x2a0 [ 234.581407] ? pcibios_free_irq+0x10/0x10 [ 234.587143] ? up_read+0xc1/0x260 [ 234.592785] device_release_driver_internal+0x1ab/0x430 [ 234.598442] unbind_store+0x152/0x200 [ 234.604064] ? sysfs_kf_write+0x3b/0x180 [ 234.609441] ? sysfs_file_ops+0x160/0x160 [ 234.615021] kernfs_fop_write+0x277/0x440 [ 234.620288] ? __sb_start_write+0x1ef/0x2c0 [ 234.625512] vfs_write+0x15e/0x460 [ 234.630786] ksys_write+0x156/0x1e0 [ 234.635988] ? __ia32_sys_read+0xb0/0xb0 [ 234.641120] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 234.646163] do_syscall_64+0x95/0x470 [ 234.651106] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 234.656004] RIP: 0033:0x7fcaf9c9cfd0 [ 234.660686] Code: 73 01 c3 48 8b 0d c0 6e 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d cd cf 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ee cb 01 00 48 89 04 24 [ 234.670128] RSP: 002b:00007ffd3b01ddd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 234.674811] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fcaf9c9cfd0 [ 234.679387] RDX: 000000000000000d RSI: 00007fcafa5c1000 RDI: 0000000000000001 [ 234.683848] RBP: 00007fcafa5c1000 R08: 000000000000000a R09: 00007fcafa59b740 [ 234.688167] R10: 00007ffd3b01d8e0 R11: 0000000000000246 R12: 00007fcaf9f75400 [ 234.692386] R13: 000000000000000d R14: 0000000000000001 R15: 0000000000000000 [ 234.696495] irq event stamp: 153067 [ 234.700525] hardirqs last enabled at (153067): [] _raw_spin_unlock_irqrestore+0x59/0x70 [ 234.704665] hardirqs last disabled at (153066): [] _raw_spin_lock_irqsave+0x22/0x90 [ 234.708722] softirqs last enabled at (153058): [] __do_softirq+0x6c5/0xb4e [ 234.712673] softirqs last disabled at (153051): [] irq_exit+0x17d/0x1d0 [ 234.716601] ---[ end trace 5dbf096843ee9ce6 ]--- Fixes: df097a278c75 ("IB/mlx5: Use the new mlx5 core notifier API") Signed-off-by: Leon Romanovsky Link: https://lore.kernel.org/r/20190731083852.584-1-leon@kernel.org Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/main.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index c2a5780cb394..e12a4404096b 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -5802,13 +5802,12 @@ static void mlx5_ib_unbind_slave_port(struct mlx5_ib_dev *ibdev, return; } - if (mpi->mdev_events.notifier_call) - mlx5_notifier_unregister(mpi->mdev, &mpi->mdev_events); - mpi->mdev_events.notifier_call = NULL; - mpi->ibdev = NULL; spin_unlock(&port->mp.mpi_lock); + if (mpi->mdev_events.notifier_call) + mlx5_notifier_unregister(mpi->mdev, &mpi->mdev_events); + mpi->mdev_events.notifier_call = NULL; mlx5_remove_netdev_notifier(ibdev, port_num); spin_lock(&port->mp.mpi_lock); -- cgit From 1f66072503316134873060b24b7895dbbcccf00e Mon Sep 17 00:00:00 2001 From: Mauro Rossi Date: Thu, 1 Aug 2019 09:04:34 +0200 Subject: iwlwifi: dbg_ini: fix compile time assert build errors This patch fixes and preserves existing code style, and readability, for IWL_ERR() and IWL_WARN() macros invocations recently added in dbg.c Fixes the following build errors with Android build system: /home/utente/pie-x86_kernel/kernel/drivers/net/wireless/intel/iwlwifi/fw/dbg.c: In function '_iwl_fw_dbg_apply_point': /home/utente/pie-x86_kernel/kernel/drivers/net/wireless/intel/iwlwifi/fw/dbg.c:2445:3: error: call to '__compiletime_assert_2446' declared with attribute error: BUILD_BUG_ON failed: err_str[sizeof(err_str) - 2] != '\n' /home/utente/pie-x86_kernel/kernel/drivers/net/wireless/intel/iwlwifi/fw/dbg.c:2451:3: error: call to '__compiletime_assert_2452' declared with attribute error: BUILD_BUG_ON failed: err_str[sizeof(err_str) - 2] != '\n' ... /home/utente/pie-x86_kernel/kernel/drivers/net/wireless/intel/iwlwifi/fw/dbg.c:2789:5: error: call to '__compiletime_assert_2790' declared with attribute error: BUILD_BUG_ON failed: invalid_ap_str[sizeof(invalid_ap_str) - 2] != '\n' /home/utente/pie-x86_kernel/kernel/drivers/net/wireless/intel/iwlwifi/fw/dbg.c:2800:5: error: call to '__compiletime_assert_2801' declared with attribute error: BUILD_BUG_ON failed: invalid_ap_str[sizeof(invalid_ap_str) - 2] != '\n' Fixes: 427ab6385cf3 ("iwlwifi: dbg_ini: enforce apply point early on buffer allocation tlv") Fixes: 57d88b116175 ("iwlwifi: dbg_ini: support debug info TLV") Signed-off-by: Mauro Rossi Signed-off-by: Johannes Berg Reviewed-by: Nathan Chancellor Tested-by: Nathan Chancellor Signed-off-by: Kalle Valo --- drivers/net/wireless/intel/iwlwifi/fw/dbg.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c index e411ac98290d..4d81776f576d 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c +++ b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c @@ -2438,17 +2438,19 @@ static void iwl_fw_dbg_info_apply(struct iwl_fw_runtime *fwrt, { u32 img_name_len = le32_to_cpu(dbg_info->img_name_len); u32 dbg_cfg_name_len = le32_to_cpu(dbg_info->dbg_cfg_name_len); - const char err_str[] = - "WRT: ext=%d. Invalid %s name length %d, expected %d\n"; if (img_name_len != IWL_FW_INI_MAX_IMG_NAME_LEN) { - IWL_WARN(fwrt, err_str, ext, "image", img_name_len, + IWL_WARN(fwrt, + "WRT: ext=%d. Invalid image name length %d, expected %d\n", + ext, img_name_len, IWL_FW_INI_MAX_IMG_NAME_LEN); return; } if (dbg_cfg_name_len != IWL_FW_INI_MAX_DBG_CFG_NAME_LEN) { - IWL_WARN(fwrt, err_str, ext, "debug cfg", dbg_cfg_name_len, + IWL_WARN(fwrt, + "WRT: ext=%d. Invalid debug cfg name length %d, expected %d\n", + ext, dbg_cfg_name_len, IWL_FW_INI_MAX_DBG_CFG_NAME_LEN); return; } @@ -2775,8 +2777,6 @@ static void _iwl_fw_dbg_apply_point(struct iwl_fw_runtime *fwrt, struct iwl_ucode_tlv *tlv = iter; void *ini_tlv = (void *)tlv->data; u32 type = le32_to_cpu(tlv->type); - const char invalid_ap_str[] = - "WRT: ext=%d. Invalid apply point %d for %s\n"; switch (type) { case IWL_UCODE_TLV_TYPE_DEBUG_INFO: @@ -2786,8 +2786,9 @@ static void _iwl_fw_dbg_apply_point(struct iwl_fw_runtime *fwrt, struct iwl_fw_ini_allocation_data *buf_alloc = ini_tlv; if (pnt != IWL_FW_INI_APPLY_EARLY) { - IWL_ERR(fwrt, invalid_ap_str, ext, pnt, - "buffer allocation"); + IWL_ERR(fwrt, + "WRT: ext=%d. Invalid apply point %d for buffer allocation\n", + ext, pnt); goto next; } @@ -2797,8 +2798,9 @@ static void _iwl_fw_dbg_apply_point(struct iwl_fw_runtime *fwrt, } case IWL_UCODE_TLV_TYPE_HCMD: if (pnt < IWL_FW_INI_APPLY_AFTER_ALIVE) { - IWL_ERR(fwrt, invalid_ap_str, ext, pnt, - "host command"); + IWL_ERR(fwrt, + "WRT: ext=%d. Invalid apply point %d for host command\n", + ext, pnt); goto next; } iwl_fw_dbg_send_hcmd(fwrt, tlv, ext); -- cgit From 9ca7ad6c7706edeae331c1632d0c63897418ebad Mon Sep 17 00:00:00 2001 From: Jeffrey Hugo Date: Wed, 26 Jun 2019 11:00:15 -0700 Subject: drm: msm: Fix add_gpu_components add_gpu_components() adds found GPU nodes from the DT to the match list, regardless of the status of the nodes. This is a problem, because if the nodes are disabled, they should not be on the match list because they will not be matched. This prevents display from initing if a GPU node is defined, but it's status is disabled. Fix this by checking the node's status before adding it to the match list. Fixes: dc3ea265b856 (drm/msm: Drop the gpu binding) Reviewed-by: Rob Clark Signed-off-by: Jeffrey Hugo Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20190626180015.45242-1-jeffrey.l.hugo@gmail.com --- drivers/gpu/drm/msm/msm_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index c226156f2dea..c356f5ccf253 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -1279,7 +1279,8 @@ static int add_gpu_components(struct device *dev, if (!np) return 0; - drm_of_component_match_add(dev, matchptr, compare_of, np); + if (of_device_is_available(np)) + drm_of_component_match_add(dev, matchptr, compare_of, np); of_node_put(np); -- cgit From 020fb3bebc224dfe9353a56ecbe2d5fac499dffc Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 1 Aug 2019 01:27:25 +0000 Subject: RDMA/hns: Fix error return code in hns_roce_v1_rsv_lp_qp() Fix to return error code -ENOMEM from the rdma_zalloc_drv_obj() error handling case instead of 0, as done elsewhere in this function. Fixes: e8ac9389f0d7 ("RDMA: Fix allocation failure on pointer pd") Fixes: 21a428a019c9 ("RDMA: Handle PD allocations by IB/core") Signed-off-by: Wei Yongjun Reviewed-by: Leon Romanovsky Link: https://lore.kernel.org/r/20190801012725.150493-1-weiyongjun1@huawei.com Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hns/hns_roce_hw_v1.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c index 81e6dedb1e02..c07e387a07a3 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c @@ -750,8 +750,10 @@ static int hns_roce_v1_rsv_lp_qp(struct hns_roce_dev *hr_dev) atomic_set(&free_mr->mr_free_cq->ib_cq.usecnt, 0); pd = rdma_zalloc_drv_obj(ibdev, ib_pd); - if (!pd) + if (!pd) { + ret = -ENOMEM; goto alloc_mem_failed; + } pd->device = ibdev; ret = hns_roce_alloc_pd(pd, NULL); -- cgit From 944a83a2669ae8aa2c7664e79376ca7468eb0a2b Mon Sep 17 00:00:00 2001 From: Matteo Croce Date: Thu, 1 Aug 2019 14:13:30 +0200 Subject: mvpp2: fix panic on module removal mvpp2 uses a delayed workqueue to gather traffic statistics. On module removal the workqueue can be destroyed before calling cancel_delayed_work_sync() on its works. Fix it by moving the destroy_workqueue() call after mvpp2_port_remove(). Also remove an unneeded call to flush_workqueue() # rmmod mvpp2 [ 2743.311722] mvpp2 f4000000.ethernet eth1: phy link down 10gbase-kr/10Gbps/Full [ 2743.320063] mvpp2 f4000000.ethernet eth1: Link is Down [ 2743.572263] mvpp2 f4000000.ethernet eth2: phy link down sgmii/1Gbps/Full [ 2743.580076] mvpp2 f4000000.ethernet eth2: Link is Down [ 2744.102169] mvpp2 f2000000.ethernet eth0: phy link down 10gbase-kr/10Gbps/Full [ 2744.110441] mvpp2 f2000000.ethernet eth0: Link is Down [ 2744.115614] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 2744.115615] Mem abort info: [ 2744.115616] ESR = 0x96000005 [ 2744.115617] Exception class = DABT (current EL), IL = 32 bits [ 2744.115618] SET = 0, FnV = 0 [ 2744.115619] EA = 0, S1PTW = 0 [ 2744.115620] Data abort info: [ 2744.115621] ISV = 0, ISS = 0x00000005 [ 2744.115622] CM = 0, WnR = 0 [ 2744.115624] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000422681000 [ 2744.115626] [0000000000000000] pgd=0000000000000000, pud=0000000000000000 [ 2744.115630] Internal error: Oops: 96000005 [#1] SMP [ 2744.115632] Modules linked in: mvpp2(-) algif_hash af_alg nls_iso8859_1 nls_cp437 vfat fat xhci_plat_hcd m25p80 spi_nor xhci_hcd mtd usbcore i2c_mv64xxx sfp usb_common marvell10g phy_generic spi_orion mdio_i2c i2c_core mvmdio phylink sbsa_gwdt ip_tables x_tables autofs4 [last unloaded: mvpp2] [ 2744.115654] CPU: 3 PID: 8357 Comm: kworker/3:2 Not tainted 5.3.0-rc2 #1 [ 2744.115655] Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT) [ 2744.115665] Workqueue: events_power_efficient phylink_resolve [phylink] [ 2744.115669] pstate: a0000085 (NzCv daIf -PAN -UAO) [ 2744.115675] pc : __queue_work+0x9c/0x4d8 [ 2744.115677] lr : __queue_work+0x170/0x4d8 [ 2744.115678] sp : ffffff801001bd50 [ 2744.115680] x29: ffffff801001bd50 x28: ffffffc422597600 [ 2744.115684] x27: ffffff80109ae6f0 x26: ffffff80108e4018 [ 2744.115688] x25: 0000000000000003 x24: 0000000000000004 [ 2744.115691] x23: ffffff80109ae6e0 x22: 0000000000000017 [ 2744.115694] x21: ffffffc42c030000 x20: ffffffc42209e8f8 [ 2744.115697] x19: 0000000000000000 x18: 0000000000000000 [ 2744.115699] x17: 0000000000000000 x16: 0000000000000000 [ 2744.115701] x15: 0000000000000010 x14: ffffffffffffffff [ 2744.115702] x13: ffffff8090e2b95f x12: ffffff8010e2b967 [ 2744.115704] x11: ffffff8010906000 x10: 0000000000000040 [ 2744.115706] x9 : ffffff80109223b8 x8 : ffffff80109223b0 [ 2744.115707] x7 : ffffffc42bc00068 x6 : 0000000000000000 [ 2744.115709] x5 : ffffffc42bc00000 x4 : 0000000000000000 [ 2744.115710] x3 : 0000000000000000 x2 : 0000000000000000 [ 2744.115712] x1 : 0000000000000008 x0 : ffffffc42c030000 [ 2744.115714] Call trace: [ 2744.115716] __queue_work+0x9c/0x4d8 [ 2744.115718] delayed_work_timer_fn+0x28/0x38 [ 2744.115722] call_timer_fn+0x3c/0x180 [ 2744.115723] expire_timers+0x60/0x168 [ 2744.115724] run_timer_softirq+0xbc/0x1e8 [ 2744.115727] __do_softirq+0x128/0x320 [ 2744.115731] irq_exit+0xa4/0xc0 [ 2744.115734] __handle_domain_irq+0x70/0xc0 [ 2744.115735] gic_handle_irq+0x58/0xa8 [ 2744.115737] el1_irq+0xb8/0x140 [ 2744.115738] console_unlock+0x3a0/0x568 [ 2744.115740] vprintk_emit+0x200/0x2a0 [ 2744.115744] dev_vprintk_emit+0x1c8/0x1e4 [ 2744.115747] dev_printk_emit+0x6c/0x7c [ 2744.115751] __netdev_printk+0x104/0x1d8 [ 2744.115752] netdev_printk+0x60/0x70 [ 2744.115756] phylink_resolve+0x38c/0x3c8 [phylink] [ 2744.115758] process_one_work+0x1f8/0x448 [ 2744.115760] worker_thread+0x54/0x500 [ 2744.115762] kthread+0x12c/0x130 [ 2744.115764] ret_from_fork+0x10/0x1c [ 2744.115768] Code: aa1403e0 97fffbbe aa0003f5 b4000700 (f9400261) Fixes: 118d6298f6f0 ("net: mvpp2: add ethtool GOP statistics") Signed-off-by: Lorenzo Bianconi Signed-off-by: Matteo Croce Acked-by: Antoine Tenart Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c index e2e61a4a9000..ccdd47f3b8fb 100644 --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c @@ -5753,9 +5753,6 @@ static int mvpp2_remove(struct platform_device *pdev) mvpp2_dbgfs_cleanup(priv); - flush_workqueue(priv->stats_queue); - destroy_workqueue(priv->stats_queue); - fwnode_for_each_available_child_node(fwnode, port_fwnode) { if (priv->port_list[i]) { mutex_destroy(&priv->port_list[i]->gather_stats_lock); @@ -5764,6 +5761,8 @@ static int mvpp2_remove(struct platform_device *pdev) i++; } + destroy_workqueue(priv->stats_queue); + for (i = 0; i < MVPP2_BM_POOLS_NUM; i++) { struct mvpp2_bm_pool *bm_pool = &priv->bm_pools[i]; -- cgit From fc5b34a35458314df1dd00281f6e41f419581aa9 Mon Sep 17 00:00:00 2001 From: Micah Morton Date: Thu, 1 Aug 2019 10:28:27 -0700 Subject: Add entry in MAINTAINERS file for SafeSetID LSM This LSM was added in v5.1 and needs an entry in the MAINTAINERS file. Signed-off-by: Micah Morton Acked-by: James Morris --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 6426db5198f0..30b8a83c3afa 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14016,6 +14016,12 @@ F: drivers/media/common/saa7146/ F: drivers/media/pci/saa7146/ F: include/media/drv-intf/saa7146* +SAFESETID SECURITY MODULE +M: Micah Morton +S: Supported +F: security/safesetid/ +F: Documentation/admin-guide/LSM/SafeSetID.rst + SAMSUNG AUDIO (ASoC) DRIVERS M: Krzysztof Kozlowski M: Sangbeom Kim -- cgit From 14f1c0f2ff156c89b14fa4c52605e7586436ffb8 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 31 Jul 2019 15:22:09 +0200 Subject: net: 8390: Fix manufacturer name in Kconfig help text The help text refers to Western Digital instead of National Semiconductor 8390, presumably because it was copied from the former. Fixes: 644570b830266ff3 ("8390: Move the 8390 related drivers") Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/ethernet/8390/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig index 2a3e2450968e..a9478577b495 100644 --- a/drivers/net/ethernet/8390/Kconfig +++ b/drivers/net/ethernet/8390/Kconfig @@ -12,8 +12,8 @@ config NET_VENDOR_8390 Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all - the questions about Western Digital cards. If you say Y, you will be - asked for your specific card in the following questions. + the questions about National Semiconductor 8390 cards. If you say Y, + you will be asked for your specific card in the following questions. if NET_VENDOR_8390 -- cgit From 93ae6d2d2e0eef6973d634dd6e1a19ba1b031c30 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 31 Jul 2019 15:22:10 +0200 Subject: net: amd: Spelling s/case/cause/ Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index de4950d2022e..9f965cdfff5c 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -14,7 +14,7 @@ config NET_VENDOR_AMD say Y. Note that the answer to this question does not directly affect - the kernel: saying N will just case the configurator to skip all + the kernel: saying N will just cause the configurator to skip all the questions regarding AMD chipsets. If you say Y, you will be asked for your specific chipset/driver in the following questions. -- cgit From ac0e3f20c7a9fbace30d38e7d306ab15f3e6fd31 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 31 Jul 2019 15:22:11 +0200 Subject: net: apple: Fix manufacturer name in Kconfig help text The help text refers to IBM instead of Apple, presumably because it was copied from the former. Fixes: 8fb6b0908176704a ("bmac/mace/macmace/mac89x0/cs89x0: Move the Macintosh (Apple) drivers") Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/ethernet/apple/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/apple/Kconfig b/drivers/net/ethernet/apple/Kconfig index fde7ae33e302..f78b9c841296 100644 --- a/drivers/net/ethernet/apple/Kconfig +++ b/drivers/net/ethernet/apple/Kconfig @@ -11,8 +11,8 @@ config NET_VENDOR_APPLE If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about IBM devices. If you say Y, you will be asked for + kernel: saying N will just cause the configurator to skip all the + questions about Apple devices. If you say Y, you will be asked for your specific card in the following questions. if NET_VENDOR_APPLE -- cgit From aca3432a607b6f9db2a9fe34f4b87d01cd99a68a Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 31 Jul 2019 15:22:12 +0200 Subject: net: broadcom: Fix manufacturer name in Kconfig help text The help text refers to AMD instead of Broadcom, presumably because it was copied from the former. Fixes: adfc5217e9db68d3 ("broadcom: Move the Broadcom drivers") Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index e9017caf024d..e24f5d2b6afe 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -14,9 +14,9 @@ config NET_VENDOR_BROADCOM say Y. Note that the answer to this question does not directly affect - the kernel: saying N will just case the configurator to skip all - the questions regarding AMD chipsets. If you say Y, you will be asked - for your specific chipset/driver in the following questions. + the kernel: saying N will just cause the configurator to skip all + the questions regarding Broadcom chipsets. If you say Y, you will + be asked for your specific chipset/driver in the following questions. if NET_VENDOR_BROADCOM -- cgit From cec754cc7813f300d286b1d7e14480f82f7f2ffa Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 31 Jul 2019 15:22:13 +0200 Subject: net: ixp4xx: Spelling s/XSacle/XScale/ Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/ethernet/xscale/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/xscale/Kconfig b/drivers/net/ethernet/xscale/Kconfig index 2f354ba029a6..cd0a8f46e7c6 100644 --- a/drivers/net/ethernet/xscale/Kconfig +++ b/drivers/net/ethernet/xscale/Kconfig @@ -13,7 +13,7 @@ config NET_VENDOR_XSCALE Note that the answer to this question does not directly affect the kernel: saying N will just cause the configurator to skip all - the questions about XSacle IXP devices. If you say Y, you will be + the questions about XScale IXP devices. If you say Y, you will be asked for your specific card in the following questions. if NET_VENDOR_XSCALE -- cgit From 85aee0a793ba223c48fd2cfe534edf83729deef6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 31 Jul 2019 15:22:14 +0200 Subject: net: nixge: Spelling s/Instrument/Instruments/ Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/ethernet/ni/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ni/Kconfig b/drivers/net/ethernet/ni/Kconfig index 70b1a03c0953..01229190132d 100644 --- a/drivers/net/ethernet/ni/Kconfig +++ b/drivers/net/ethernet/ni/Kconfig @@ -11,7 +11,7 @@ config NET_VENDOR_NI Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all - the questions about National Instrument devices. + the questions about National Instruments devices. If you say Y, you will be asked for your specific device in the following questions. -- cgit From 1583d448ea84a5b8b98c8d250200ce768b6ced38 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 31 Jul 2019 15:22:15 +0200 Subject: net: packetengines: Fix manufacturer spelling and capitalization Use "Packet Engines" consistently. Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/ethernet/packetengines/Kconfig | 6 +++--- drivers/net/ethernet/packetengines/Makefile | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig index 8161e308e64b..ead3750b4489 100644 --- a/drivers/net/ethernet/packetengines/Kconfig +++ b/drivers/net/ethernet/packetengines/Kconfig @@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0-only # -# Packet engine device configuration +# Packet Engines device configuration # config NET_VENDOR_PACKET_ENGINES - bool "Packet Engine devices" + bool "Packet Engines devices" default y depends on PCI ---help--- @@ -12,7 +12,7 @@ config NET_VENDOR_PACKET_ENGINES Note that the answer to this question doesn't directly affect the kernel: saying N will just cause the configurator to skip all - the questions about packet engine devices. If you say Y, you will + the questions about Packet Engines devices. If you say Y, you will be asked for your specific card in the following questions. if NET_VENDOR_PACKET_ENGINES diff --git a/drivers/net/ethernet/packetengines/Makefile b/drivers/net/ethernet/packetengines/Makefile index 1553c9cfc254..cf054b796d11 100644 --- a/drivers/net/ethernet/packetengines/Makefile +++ b/drivers/net/ethernet/packetengines/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only # -# Makefile for the Packet Engine network device drivers. +# Makefile for the Packet Engines network device drivers. # obj-$(CONFIG_HAMACHI) += hamachi.o -- cgit From 509b0538bc28870164903f5683e4c3f3b1eca965 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 31 Jul 2019 15:22:16 +0200 Subject: net: samsung: Spelling s/case/cause/ Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/ethernet/samsung/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/samsung/Kconfig b/drivers/net/ethernet/samsung/Kconfig index 027938017579..e92a178a76df 100644 --- a/drivers/net/ethernet/samsung/Kconfig +++ b/drivers/net/ethernet/samsung/Kconfig @@ -11,7 +11,7 @@ config NET_VENDOR_SAMSUNG say Y. Note that the answer to this question does not directly affect - the kernel: saying N will just case the configurator to skip all + the kernel: saying N will just cause the configurator to skip all the questions about Samsung chipsets. If you say Y, you will be asked for your specific chipset/driver in the following questions. -- cgit From b55d996f057bf2e7ba9422a80b5e17e99860cb0b Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 1 Aug 2019 09:40:26 -0700 Subject: Input: usbtouchscreen - initialize PM mutex before using it Mutexes shall be initialized before they are used. Fixes: 12e510dbc57b2 ("Input: usbtouchscreen - fix deadlock in autosuspend") Reported-by: syzbot+199ea16c7f26418b4365@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/usbtouchscreen.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index a2cec6cacf57..16d70201de4a 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -1659,6 +1659,8 @@ static int usbtouch_probe(struct usb_interface *intf, if (!usbtouch || !input_dev) goto out_free; + mutex_init(&usbtouch->pm_mutex); + type = &usbtouch_dev_info[id->driver_info]; usbtouch->type = type; if (!type->process_pkt) -- cgit From c88090dfc84254fa149174eb3e6a8458de1912c4 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 1 Aug 2019 09:44:25 -0700 Subject: Input: kbtab - sanity check for endpoint type The driver should check whether the endpoint it uses has the correct type. Reported-by: syzbot+c7df50363aaff50aa363@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/kbtab.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c index 04b85571f41e..aa577898e952 100644 --- a/drivers/input/tablet/kbtab.c +++ b/drivers/input/tablet/kbtab.c @@ -117,6 +117,10 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i if (intf->cur_altsetting->desc.bNumEndpoints < 1) return -ENODEV; + endpoint = &intf->cur_altsetting->endpoint[0].desc; + if (!usb_endpoint_is_int_in(endpoint)) + return -ENODEV; + kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL); input_dev = input_allocate_device(); if (!kbtab || !input_dev) @@ -155,8 +159,6 @@ static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *i input_set_abs_params(input_dev, ABS_Y, 0, 0x1750, 4, 0); input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0); - endpoint = &intf->cur_altsetting->endpoint[0].desc; - usb_fill_int_urb(kbtab->irq, dev, usb_rcvintpipe(dev, endpoint->bEndpointAddress), kbtab->data, 8, -- cgit From 5511c0c309db4c526a6e9f8b2b8a1483771574bc Mon Sep 17 00:00:00 2001 From: Suzuki K Poulose Date: Thu, 1 Aug 2019 11:23:23 -0600 Subject: coresight: Fix DEBUG_LOCKS_WARN_ON for uninitialized attribute While running the linux-next with CONFIG_DEBUG_LOCKS_ALLOC enabled, I get the following splat. BUG: key ffffcb5636929298 has not been registered! ------------[ cut here ]------------ DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 1 PID: 53 at kernel/locking/lockdep.c:3669 lockdep_init_map+0x164/0x1f0 CPU: 1 PID: 53 Comm: kworker/1:1 Tainted: G W 5.2.0-next-20190712-00015-g00ad4634222e-dirty #603 Workqueue: events amba_deferred_retry_func pstate: 60c00005 (nZCv daif +PAN +UAO) pc : lockdep_init_map+0x164/0x1f0 lr : lockdep_init_map+0x164/0x1f0 [ trimmed ] Call trace: lockdep_init_map+0x164/0x1f0 __kernfs_create_file+0x9c/0x158 sysfs_add_file_mode_ns+0xa8/0x1d0 sysfs_add_file_to_group+0x88/0xd8 etm_perf_add_symlink_sink+0xcc/0x138 coresight_register+0x110/0x280 tmc_probe+0x160/0x420 [ trimmed ] ---[ end trace ab4cc669615ba1b0 ]--- Fix this by initialising the dynamically allocated attribute properly. Cc: Mathieu Poirier Fixes: bb8e370bdc14 ("coresight: perf: Add "sinks" group to PMU directory") Cc: stable Signed-off-by: Suzuki K Poulose [Fixed a typograhic error in the changelog] Signed-off-by: Mathieu Poirier Link: https://lore.kernel.org/r/20190801172323.18359-2-mathieu.poirier@linaro.org Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight-etm-perf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c index 5c1ca0df5cb0..84f1dcb69827 100644 --- a/drivers/hwtracing/coresight/coresight-etm-perf.c +++ b/drivers/hwtracing/coresight/coresight-etm-perf.c @@ -544,6 +544,7 @@ int etm_perf_add_symlink_sink(struct coresight_device *csdev) /* See function coresight_get_sink_by_id() to know where this is used */ hash = hashlen_hash(hashlen_string(NULL, name)); + sysfs_attr_init(&ea->attr.attr); ea->attr.attr.name = devm_kstrdup(dev, name, GFP_KERNEL); if (!ea->attr.attr.name) return -ENOMEM; -- cgit From 0eb6ddfb865c7d7ec05cb330050671363515e67f Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 1 Aug 2019 19:21:51 +0900 Subject: block: Fix __blkdev_direct_IO() for bio fragments The recent fix to properly handle IOCB_NOWAIT for async O_DIRECT IO (patch 6a43074e2f46) introduced two problems with BIO fragment handling for direct IOs: 1) The dio size processed is calculated by incrementing the ret variable by the size of the bio fragment issued for the dio. However, this size is obtained directly from bio->bi_iter.bi_size AFTER the bio submission which may result in referencing the bi_size value after the bio completed, resulting in an incorrect value use. 2) The ret variable is not incremented by the size of the last bio fragment issued for the bio, leading to an invalid IO size being returned to the user. Fix both problem by using dio->size (which is incremented before the bio submission) to update the value of ret after bio submissions, including for the last bio fragment issued. Fixes: 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") Reported-by: Masato Suzuki Signed-off-by: Damien Le Moal Signed-off-by: Jens Axboe --- fs/block_dev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/block_dev.c b/fs/block_dev.c index 22591bad9353..a6f7c892cb4a 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -439,6 +439,7 @@ __blkdev_direct_IO(struct kiocb *iocb, struct iov_iter *iter, int nr_pages) ret = -EAGAIN; goto error; } + ret = dio->size; if (polled) WRITE_ONCE(iocb->ki_cookie, qc); @@ -465,7 +466,7 @@ __blkdev_direct_IO(struct kiocb *iocb, struct iov_iter *iter, int nr_pages) ret = -EAGAIN; goto error; } - ret += bio->bi_iter.bi_size; + ret = dio->size; bio = bio_alloc(gfp, nr_pages); if (!bio) { -- cgit From d12e3aae160fb26b534c4496b211d6e60a5179ed Mon Sep 17 00:00:00 2001 From: Michał Mirosław Date: Mon, 22 Jul 2019 20:55:27 +0200 Subject: i2c: at91: disable TXRDY interrupt after sending data MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Driver was not disabling TXRDY interrupt after last TX byte. This caused interrupt storm until transfer timeouts for slow or broken device on the bus. The patch fixes the interrupt storm on my SAMA5D2-based board. Cc: stable@vger.kernel.org # 5.2.x [v5.2 introduced file split; the patch should apply to i2c-at91.c before the split] Fixes: fac368a04048 ("i2c: at91: add new driver") Signed-off-by: Michał Mirosław Acked-by: Ludovic Desroches Tested-by: Raag Jadav Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-at91-master.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c index e87232f2e708..a3fcc35ffd3b 100644 --- a/drivers/i2c/busses/i2c-at91-master.c +++ b/drivers/i2c/busses/i2c-at91-master.c @@ -122,9 +122,11 @@ static void at91_twi_write_next_byte(struct at91_twi_dev *dev) writeb_relaxed(*dev->buf, dev->base + AT91_TWI_THR); /* send stop when last byte has been written */ - if (--dev->buf_len == 0) + if (--dev->buf_len == 0) { if (!dev->use_alt_cmd) at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); + at91_twi_write(dev, AT91_TWI_IDR, AT91_TWI_TXRDY); + } dev_dbg(dev->dev, "wrote 0x%x, to go %zu\n", *dev->buf, dev->buf_len); @@ -542,9 +544,8 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) } else { at91_twi_write_next_byte(dev); at91_twi_write(dev, AT91_TWI_IER, - AT91_TWI_TXCOMP | - AT91_TWI_NACK | - AT91_TWI_TXRDY); + AT91_TWI_TXCOMP | AT91_TWI_NACK | + (dev->buf_len ? AT91_TWI_TXRDY : 0)); } } -- cgit From b1ac6704493fa14b5dc19eb6b69a73932361a131 Mon Sep 17 00:00:00 2001 From: Michał Mirosław Date: Mon, 22 Jul 2019 21:05:56 +0200 Subject: i2c: at91: fix clk_offset for sama5d2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In SAMA5D2 datasheet, TWIHS_CWGR register rescription mentions clock offset of 3 cycles (compared to 4 in eg. SAMA5D3). Cc: stable@vger.kernel.org # 5.2.x [needs applying to i2c-at91.c instead for earlier kernels] Fixes: 0ef6f3213dac ("i2c: at91: add support for new alternative command mode") Signed-off-by: Michał Mirosław Acked-by: Ludovic Desroches Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-at91-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c index 8d55cdd69ff4..435c7d7377a3 100644 --- a/drivers/i2c/busses/i2c-at91-core.c +++ b/drivers/i2c/busses/i2c-at91-core.c @@ -142,7 +142,7 @@ static struct at91_twi_pdata sama5d4_config = { static struct at91_twi_pdata sama5d2_config = { .clk_max_div = 7, - .clk_offset = 4, + .clk_offset = 3, .has_unre_flag = true, .has_alt_cmd = true, .has_hold_field = true, -- cgit From 8eb9a2dff019055e4ff307bb7f8c64a7a20e79c8 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sun, 28 Jul 2019 18:51:38 -0500 Subject: i2c: s3c2410: Mark expected switch fall-through Mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/i2c/busses/i2c-s3c2410.c: In function 'i2c_s3c_irq_nextbyte': drivers/i2c/busses/i2c-s3c2410.c:431:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (i2c->state == STATE_READ) ^ drivers/i2c/busses/i2c-s3c2410.c:439:2: note: here case STATE_WRITE: ^~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: Stephen Rothwell Signed-off-by: Gustavo A. R. Silva Reviewed-by: Kees Cook Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-s3c2410.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index d97fb857b0ea..c98ef4c4a0c9 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -435,6 +435,7 @@ static int i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) * fall through to the write state, as we will need to * send a byte as well */ + /* Fall through */ case STATE_WRITE: /* -- cgit From 42787ed79638dc7f0f8d5c164caba1e87bfab50f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 1 Aug 2019 01:31:08 +0200 Subject: ACPI: PM: Fix regression in acpi_device_set_power() Commit f850a48a0799 ("ACPI: PM: Allow transitions to D0 to occur in special cases") overlooked the fact that acpi_power_transition() may change the power.state value for the target device and if that happens, it may confuse acpi_device_set_power() and cause it to omit the _PS0 evaluation which on some systems is necessary to change power states of devices from low-power to D0. Fix that by saving the current value of power.state for the target device before passing it to acpi_power_transition() and using the saved value in a subsequent check. Fixes: f850a48a0799 ("ACPI: PM: Allow transitions to D0 to occur in special cases") Reported-by: Kai-Heng Feng Reported-by: Mario Limonciello Signed-off-by: Rafael J. Wysocki Tested-by: Kai-Heng Feng Tested-by: Mario Limonciello --- drivers/acpi/device_pm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 28cffaaf9d82..f616b16c1f0b 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -232,13 +232,15 @@ int acpi_device_set_power(struct acpi_device *device, int state) if (device->power.flags.power_resources) result = acpi_power_transition(device, target_state); } else { + int cur_state = device->power.state; + if (device->power.flags.power_resources) { result = acpi_power_transition(device, ACPI_STATE_D0); if (result) goto end; } - if (device->power.state == ACPI_STATE_D0) { + if (cur_state == ACPI_STATE_D0) { int psc; /* Nothing to do here if _PSC is not present. */ -- cgit From 4da5f0018eef4c0de31675b670c80e82e13e99d1 Mon Sep 17 00:00:00 2001 From: Taras Kondratiuk Date: Mon, 29 Jul 2019 22:15:07 +0000 Subject: tipc: compat: allow tipc commands without arguments Commit 2753ca5d9009 ("tipc: fix uninit-value in tipc_nl_compat_doit") broke older tipc tools that use compat interface (e.g. tipc-config from tipcutils package): % tipc-config -p operation not supported The commit started to reject TIPC netlink compat messages that do not have attributes. It is too restrictive because some of such messages are valid (they don't need any arguments): % grep 'tx none' include/uapi/linux/tipc_config.h #define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ #define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ #define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ #define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */ #define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ #define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ #define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ #define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ This patch relaxes the original fix and rejects messages without arguments only if such arguments are expected by a command (reg_type is non zero). Fixes: 2753ca5d9009 ("tipc: fix uninit-value in tipc_nl_compat_doit") Cc: stable@vger.kernel.org Signed-off-by: Taras Kondratiuk Acked-by: Ying Xue Signed-off-by: David S. Miller --- net/tipc/netlink_compat.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c index d86030ef1232..e135d4e11231 100644 --- a/net/tipc/netlink_compat.c +++ b/net/tipc/netlink_compat.c @@ -55,6 +55,7 @@ struct tipc_nl_compat_msg { int rep_type; int rep_size; int req_type; + int req_size; struct net *net; struct sk_buff *rep; struct tlv_desc *req; @@ -257,7 +258,8 @@ static int tipc_nl_compat_dumpit(struct tipc_nl_compat_cmd_dump *cmd, int err; struct sk_buff *arg; - if (msg->req_type && !TLV_CHECK_TYPE(msg->req, msg->req_type)) + if (msg->req_type && (!msg->req_size || + !TLV_CHECK_TYPE(msg->req, msg->req_type))) return -EINVAL; msg->rep = tipc_tlv_alloc(msg->rep_size); @@ -354,7 +356,8 @@ static int tipc_nl_compat_doit(struct tipc_nl_compat_cmd_doit *cmd, { int err; - if (msg->req_type && !TLV_CHECK_TYPE(msg->req, msg->req_type)) + if (msg->req_type && (!msg->req_size || + !TLV_CHECK_TYPE(msg->req, msg->req_type))) return -EINVAL; err = __tipc_nl_compat_doit(cmd, msg); @@ -1278,8 +1281,8 @@ static int tipc_nl_compat_recv(struct sk_buff *skb, struct genl_info *info) goto send; } - len = nlmsg_attrlen(req_nlh, GENL_HDRLEN + TIPC_GENL_HDRLEN); - if (!len || !TLV_OK(msg.req, len)) { + msg.req_size = nlmsg_attrlen(req_nlh, GENL_HDRLEN + TIPC_GENL_HDRLEN); + if (msg.req_size && !TLV_OK(msg.req, msg.req_size)) { msg.rep = tipc_get_err_tlv(TIPC_CFG_NOT_SUPPORTED); err = -EOPNOTSUPP; goto send; -- cgit From 224c04973db1125fcebefffd86115f99f50f8277 Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Tue, 30 Jul 2019 15:13:57 +0200 Subject: net: usb: pegasus: fix improper read if get_registers() fail get_registers() may fail with -ENOMEM and in this case we can read a garbage from the status variable tmp. Reported-by: syzbot+3499a83b2d062ae409d4@syzkaller.appspotmail.com Signed-off-by: Denis Kirjanov Signed-off-by: David S. Miller --- drivers/net/usb/pegasus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 6d25dea5ad4b..f7d117d80cfb 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -282,7 +282,7 @@ static void mdio_write(struct net_device *dev, int phy_id, int loc, int val) static int read_eprom_word(pegasus_t *pegasus, __u8 index, __u16 *retdata) { int i; - __u8 tmp; + __u8 tmp = 0; __le16 retdatai; int ret; -- cgit From 412e85b605315fd129a849599cf4a5a7959573a8 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Thu, 1 Aug 2019 18:02:15 -0400 Subject: drm/nouveau: Only release VCPI slots on mode changes Looks like a regression got introduced into nv50_mstc_atomic_check() that somehow didn't get found until now. If userspace changes crtc_state->active to false but leaves the CRTC enabled, we end up calling drm_dp_atomic_find_vcpi_slots() using the PBN calculated in asyh->dp.pbn. However, if the display is inactive we end up calculating a PBN of 0, which inadvertently causes us to have an allocation of 0. >From there, if userspace then disables the CRTC afterwards we end up accidentally attempting to free the VCPI twice: WARNING: CPU: 0 PID: 1484 at drivers/gpu/drm/drm_dp_mst_topology.c:3336 drm_dp_atomic_release_vcpi_slots+0x87/0xb0 [drm_kms_helper] RIP: 0010:drm_dp_atomic_release_vcpi_slots+0x87/0xb0 [drm_kms_helper] Call Trace: drm_atomic_helper_check_modeset+0x3f3/0xa60 [drm_kms_helper] ? drm_atomic_check_only+0x43/0x780 [drm] drm_atomic_helper_check+0x15/0x90 [drm_kms_helper] nv50_disp_atomic_check+0x83/0x1d0 [nouveau] drm_atomic_check_only+0x54d/0x780 [drm] ? drm_atomic_set_crtc_for_connector+0xec/0x100 [drm] drm_atomic_commit+0x13/0x50 [drm] drm_atomic_helper_set_config+0x81/0x90 [drm_kms_helper] drm_mode_setcrtc+0x194/0x6a0 [drm] ? vprintk_emit+0x16a/0x230 ? drm_ioctl+0x163/0x390 [drm] ? drm_mode_getcrtc+0x180/0x180 [drm] drm_ioctl_kernel+0xaa/0xf0 [drm] drm_ioctl+0x208/0x390 [drm] ? drm_mode_getcrtc+0x180/0x180 [drm] nouveau_drm_ioctl+0x63/0xb0 [nouveau] do_vfs_ioctl+0x405/0x660 ? recalc_sigpending+0x17/0x50 ? _copy_from_user+0x37/0x60 ksys_ioctl+0x5e/0x90 ? exit_to_usermode_loop+0x92/0xe0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x59/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 WARNING: CPU: 0 PID: 1484 at drivers/gpu/drm/drm_dp_mst_topology.c:3336 drm_dp_atomic_release_vcpi_slots+0x87/0xb0 [drm_kms_helper] ---[ end trace 4c395c0c51b1f88d ]--- [drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] *ERROR* no VCPI for [MST PORT:00000000e288eb7d] found in mst state 000000008e642070 So, fix this by doing what we probably should have done from the start: only call drm_dp_atomic_find_vcpi_slots() when crtc_state->mode_changed is set, so that VCPI allocations remain for as long as the CRTC is enabled. Signed-off-by: Lyude Paul Fixes: 232c9eec417a ("drm/nouveau: Use atomic VCPI helpers for MST") Cc: Lyude Paul Cc: Ben Skeggs Cc: Daniel Vetter Cc: David Airlie Cc: Jerry Zuo Cc: Harry Wentland Cc: Juston Li Cc: Karol Herbst Cc: Laurent Pinchart Cc: Ilia Mirkin Cc: # v5.1+ Acked-by: Ben Skeggs Signed-off-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/20190801220216.15323-1-lyude@redhat.com --- drivers/gpu/drm/nouveau/dispnv50/disp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/dispnv50/disp.c b/drivers/gpu/drm/nouveau/dispnv50/disp.c index 8497768f1b41..126703816794 100644 --- a/drivers/gpu/drm/nouveau/dispnv50/disp.c +++ b/drivers/gpu/drm/nouveau/dispnv50/disp.c @@ -780,7 +780,7 @@ nv50_msto_atomic_check(struct drm_encoder *encoder, drm_dp_calc_pbn_mode(crtc_state->adjusted_mode.clock, connector->display_info.bpc * 3); - if (drm_atomic_crtc_needs_modeset(crtc_state)) { + if (crtc_state->mode_changed) { slots = drm_dp_atomic_find_vcpi_slots(state, &mstm->mgr, mstc->port, asyh->dp.pbn); -- cgit From 41995342b40c418a47603e1321256d2c4a2ed0fb Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Thu, 1 Aug 2019 13:06:30 +0200 Subject: s390/dasd: fix endless loop after read unit address configuration After getting a storage server event that causes the DASD device driver to update its unit address configuration during a device shutdown there is the possibility of an endless loop in the device driver. In the system log there will be ongoing DASD error messages with RC: -19. The reason is that the loop starting the ruac request only terminates when the retry counter is decreased to 0. But in the sleep_on function there are early exit paths that do not decrease the retry counter. Prevent an endless loop by handling those cases separately. Remove the unnecessary do..while loop since the sleep_on function takes care of retries by itself. Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: stable@vger.kernel.org # 2.6.25+ Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Signed-off-by: Jens Axboe --- drivers/s390/block/dasd_alias.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index b9ce93e9df89..99f86612f775 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -383,6 +383,20 @@ suborder_not_supported(struct dasd_ccw_req *cqr) char msg_format; char msg_no; + /* + * intrc values ENODEV, ENOLINK and EPERM + * will be optained from sleep_on to indicate that no + * IO operation can be started + */ + if (cqr->intrc == -ENODEV) + return 1; + + if (cqr->intrc == -ENOLINK) + return 1; + + if (cqr->intrc == -EPERM) + return 1; + sense = dasd_get_sense(&cqr->irb); if (!sense) return 0; @@ -447,12 +461,8 @@ static int read_unit_address_configuration(struct dasd_device *device, lcu->flags &= ~NEED_UAC_UPDATE; spin_unlock_irqrestore(&lcu->lock, flags); - do { - rc = dasd_sleep_on(cqr); - if (rc && suborder_not_supported(cqr)) - return -EOPNOTSUPP; - } while (rc && (cqr->retries > 0)); - if (rc) { + rc = dasd_sleep_on(cqr); + if (rc && !suborder_not_supported(cqr)) { spin_lock_irqsave(&lcu->lock, flags); lcu->flags |= NEED_UAC_UPDATE; spin_unlock_irqrestore(&lcu->lock, flags); -- cgit From 25e44338321af545ab34243a6081c3f0fc6107d0 Mon Sep 17 00:00:00 2001 From: Gary R Hook Date: Tue, 30 Jul 2019 16:05:22 +0000 Subject: crypto: ccp - Fix oops by properly managing allocated structures A plaintext or ciphertext length of 0 is allowed in AES, in which case no encryption occurs. Ensure that we don't clean up data structures that were never allocated. Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: Signed-off-by: Gary R Hook Signed-off-by: Herbert Xu --- drivers/crypto/ccp/ccp-ops.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/ccp/ccp-ops.c b/drivers/crypto/ccp/ccp-ops.c index 3ebe031773d5..59f9849c3662 100644 --- a/drivers/crypto/ccp/ccp-ops.c +++ b/drivers/crypto/ccp/ccp-ops.c @@ -859,11 +859,11 @@ e_tag: ccp_dm_free(&final_wa); e_dst: - if (aes->src_len && !in_place) + if (ilen > 0 && !in_place) ccp_free_data(&dst, cmd_q); e_src: - if (aes->src_len) + if (ilen > 0) ccp_free_data(&src, cmd_q); e_aad: -- cgit From 9f00baf74e4b6f79a3a3dfab44fb7bb2e797b551 Mon Sep 17 00:00:00 2001 From: Gary R Hook Date: Tue, 30 Jul 2019 16:05:24 +0000 Subject: crypto: ccp - Add support for valid authsize values less than 16 AES GCM encryption allows for authsize values of 4, 8, and 12-16 bytes. Validate the requested authsize, and retain it to save in the request context. Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: Signed-off-by: Gary R Hook Signed-off-by: Herbert Xu --- drivers/crypto/ccp/ccp-crypto-aes-galois.c | 14 ++++++++++++++ drivers/crypto/ccp/ccp-ops.c | 26 +++++++++++++++++++++----- include/linux/ccp.h | 2 ++ 3 files changed, 37 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/ccp/ccp-crypto-aes-galois.c b/drivers/crypto/ccp/ccp-crypto-aes-galois.c index d22631cb2bb3..02eba84028b3 100644 --- a/drivers/crypto/ccp/ccp-crypto-aes-galois.c +++ b/drivers/crypto/ccp/ccp-crypto-aes-galois.c @@ -58,6 +58,19 @@ static int ccp_aes_gcm_setkey(struct crypto_aead *tfm, const u8 *key, static int ccp_aes_gcm_setauthsize(struct crypto_aead *tfm, unsigned int authsize) { + switch (authsize) { + case 16: + case 15: + case 14: + case 13: + case 12: + case 8: + case 4: + break; + default: + return -EINVAL; + } + return 0; } @@ -104,6 +117,7 @@ static int ccp_aes_gcm_crypt(struct aead_request *req, bool encrypt) memset(&rctx->cmd, 0, sizeof(rctx->cmd)); INIT_LIST_HEAD(&rctx->cmd.entry); rctx->cmd.engine = CCP_ENGINE_AES; + rctx->cmd.u.aes.authsize = crypto_aead_authsize(tfm); rctx->cmd.u.aes.type = ctx->u.aes.type; rctx->cmd.u.aes.mode = ctx->u.aes.mode; rctx->cmd.u.aes.action = encrypt; diff --git a/drivers/crypto/ccp/ccp-ops.c b/drivers/crypto/ccp/ccp-ops.c index 59f9849c3662..ef723e2722a8 100644 --- a/drivers/crypto/ccp/ccp-ops.c +++ b/drivers/crypto/ccp/ccp-ops.c @@ -622,6 +622,7 @@ static int ccp_run_aes_gcm_cmd(struct ccp_cmd_queue *cmd_q, unsigned long long *final; unsigned int dm_offset; + unsigned int authsize; unsigned int jobid; unsigned int ilen; bool in_place = true; /* Default value */ @@ -643,6 +644,21 @@ static int ccp_run_aes_gcm_cmd(struct ccp_cmd_queue *cmd_q, if (!aes->key) /* Gotta have a key SGL */ return -EINVAL; + /* Zero defaults to 16 bytes, the maximum size */ + authsize = aes->authsize ? aes->authsize : AES_BLOCK_SIZE; + switch (authsize) { + case 16: + case 15: + case 14: + case 13: + case 12: + case 8: + case 4: + break; + default: + return -EINVAL; + } + /* First, decompose the source buffer into AAD & PT, * and the destination buffer into AAD, CT & tag, or * the input into CT & tag. @@ -657,7 +673,7 @@ static int ccp_run_aes_gcm_cmd(struct ccp_cmd_queue *cmd_q, p_tag = scatterwalk_ffwd(sg_tag, p_outp, ilen); } else { /* Input length for decryption includes tag */ - ilen = aes->src_len - AES_BLOCK_SIZE; + ilen = aes->src_len - authsize; p_tag = scatterwalk_ffwd(sg_tag, p_inp, ilen); } @@ -839,19 +855,19 @@ static int ccp_run_aes_gcm_cmd(struct ccp_cmd_queue *cmd_q, if (aes->action == CCP_AES_ACTION_ENCRYPT) { /* Put the ciphered tag after the ciphertext. */ - ccp_get_dm_area(&final_wa, 0, p_tag, 0, AES_BLOCK_SIZE); + ccp_get_dm_area(&final_wa, 0, p_tag, 0, authsize); } else { /* Does this ciphered tag match the input? */ - ret = ccp_init_dm_workarea(&tag, cmd_q, AES_BLOCK_SIZE, + ret = ccp_init_dm_workarea(&tag, cmd_q, authsize, DMA_BIDIRECTIONAL); if (ret) goto e_tag; - ret = ccp_set_dm_area(&tag, 0, p_tag, 0, AES_BLOCK_SIZE); + ret = ccp_set_dm_area(&tag, 0, p_tag, 0, authsize); if (ret) goto e_tag; ret = crypto_memneq(tag.address, final_wa.address, - AES_BLOCK_SIZE) ? -EBADMSG : 0; + authsize) ? -EBADMSG : 0; ccp_dm_free(&tag); } diff --git a/include/linux/ccp.h b/include/linux/ccp.h index 7e9c991c95e0..43ed9e77cf81 100644 --- a/include/linux/ccp.h +++ b/include/linux/ccp.h @@ -173,6 +173,8 @@ struct ccp_aes_engine { enum ccp_aes_mode mode; enum ccp_aes_action action; + u32 authsize; + struct scatterlist *key; u32 key_len; /* In bytes */ -- cgit From e2664ecbb2f26225ac6646876f2899558ffb2604 Mon Sep 17 00:00:00 2001 From: Gary R Hook Date: Tue, 30 Jul 2019 16:05:26 +0000 Subject: crypto: ccp - Ignore tag length when decrypting GCM ciphertext AES GCM input buffers for decryption contain AAD+CTEXT+TAG. Only decrypt the ciphertext, and use the tag for comparison. Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: Signed-off-by: Gary R Hook Signed-off-by: Herbert Xu --- drivers/crypto/ccp/ccp-ops.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/crypto/ccp/ccp-ops.c b/drivers/crypto/ccp/ccp-ops.c index ef723e2722a8..76e1b4dcd193 100644 --- a/drivers/crypto/ccp/ccp-ops.c +++ b/drivers/crypto/ccp/ccp-ops.c @@ -782,8 +782,7 @@ static int ccp_run_aes_gcm_cmd(struct ccp_cmd_queue *cmd_q, while (src.sg_wa.bytes_left) { ccp_prepare_data(&src, &dst, &op, AES_BLOCK_SIZE, true); if (!src.sg_wa.bytes_left) { - unsigned int nbytes = aes->src_len - % AES_BLOCK_SIZE; + unsigned int nbytes = ilen % AES_BLOCK_SIZE; if (nbytes) { op.eom = 1; -- cgit From 9eae7c3bcb52ec0a9f816d830e232e36a20b46d4 Mon Sep 17 00:00:00 2001 From: Fuqian Huang Date: Thu, 4 Jul 2019 10:34:36 +0800 Subject: drm/exynos: using dev_get_drvdata directly Several drivers cast a struct device pointer to a struct platform_device pointer only to then call platform_get_drvdata(). To improve readability, these constructs can be simplified by using dev_get_drvdata() directly. Signed-off-by: Fuqian Huang Reviewed-by: Emil Velikov Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_fimc.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c index a594ab7be2c0..164d914cbe9a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c @@ -44,7 +44,7 @@ static unsigned int fimc_mask = 0xc; module_param_named(fimc_devs, fimc_mask, uint, 0644); MODULE_PARM_DESC(fimc_devs, "Alias mask for assigning FIMC devices to Exynos DRM"); -#define get_fimc_context(dev) platform_get_drvdata(to_platform_device(dev)) +#define get_fimc_context(dev) dev_get_drvdata(dev) enum { FIMC_CLK_LCLK, diff --git a/drivers/gpu/drm/exynos/exynos_drm_gsc.c b/drivers/gpu/drm/exynos/exynos_drm_gsc.c index 1e4b21c49a06..1c524db9570f 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gsc.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gsc.c @@ -58,7 +58,7 @@ #define GSC_COEF_DEPTH 3 #define GSC_AUTOSUSPEND_DELAY 2000 -#define get_gsc_context(dev) platform_get_drvdata(to_platform_device(dev)) +#define get_gsc_context(dev) dev_get_drvdata(dev) #define gsc_read(offset) readl(ctx->regs + (offset)) #define gsc_write(cfg, offset) writel(cfg, ctx->regs + (offset)) -- cgit From 59d431746f1b3c76fd551b71241d7fdce38a58e9 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 9 Jul 2019 21:01:14 +0900 Subject: drm/exynos: remove redundant assignment to pointer 'node' The pointer 'node' is being assigned with a value that is never read and is re-assigned later. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_g2d.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 50904eee96f7..2a3382d43bc9 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -267,7 +267,7 @@ static inline void g2d_hw_reset(struct g2d_data *g2d) static int g2d_init_cmdlist(struct g2d_data *g2d) { struct device *dev = g2d->dev; - struct g2d_cmdlist_node *node = g2d->cmdlist_node; + struct g2d_cmdlist_node *node; int nr; int ret; struct g2d_buf_info *buf_info; -- cgit From d6f25bd9d4079165ea90f12d71e06d1dca83cd86 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 9 Jul 2019 21:08:48 +0900 Subject: drm/exynos: add CONFIG_MMU dependency Compile-testing this driver on a NOMMU configuration shows a link failure: drivers/gpu/drm/exynos/exynos_drm_gem.o: In function `exynos_drm_gem_fault': exynos_drm_gem.c:(.text+0x484): undefined reference to `vmf_insert_mixed' Add a CONFIG_MMU dependency to ensure we only enable this in configurations that build correctly. Many other drm drivers have the same dependency. It would be nice to make this work in MMU-less configurations, but evidently nobody has ever needed this so far. Fixes: 156bdac99061 ("drm/exynos: trigger build of all modules") Signed-off-by: Arnd Bergmann Reviewed-by: Vladimir Murzin Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig index 60ce4a8ad9e1..6f7d3b3b3628 100644 --- a/drivers/gpu/drm/exynos/Kconfig +++ b/drivers/gpu/drm/exynos/Kconfig @@ -2,6 +2,7 @@ config DRM_EXYNOS tristate "DRM Support for Samsung SoC EXYNOS Series" depends on OF && DRM && (ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_MULTIPLATFORM || COMPILE_TEST) + depends on MMU select DRM_KMS_HELPER select VIDEOMODE_HELPERS select SND_SOC_HDMI_CODEC if SND_SOC -- cgit From 1bbbab097a05276e312dd2462791d32b21ceb1ee Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 22 Jul 2019 23:25:35 +0100 Subject: drm/exynos: fix missing decrement of retry counter Currently the retry counter is not being decremented, leading to a potential infinite spin if the scalar_reads don't change state. Addresses-Coverity: ("Infinite loop") Fixes: 280e54c9f614 ("drm/exynos: scaler: Reset hardware before starting the operation") Signed-off-by: Colin Ian King Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_drm_scaler.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_scaler.c b/drivers/gpu/drm/exynos/exynos_drm_scaler.c index 9af096479e1c..b24ba948b725 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_scaler.c +++ b/drivers/gpu/drm/exynos/exynos_drm_scaler.c @@ -94,12 +94,12 @@ static inline int scaler_reset(struct scaler_context *scaler) scaler_write(SCALER_CFG_SOFT_RESET, SCALER_CFG); do { cpu_relax(); - } while (retry > 1 && + } while (--retry > 1 && scaler_read(SCALER_CFG) & SCALER_CFG_SOFT_RESET); do { cpu_relax(); scaler_write(1, SCALER_INT_EN); - } while (retry > 0 && scaler_read(SCALER_INT_EN) != 1); + } while (--retry > 0 && scaler_read(SCALER_INT_EN) != 1); return retry ? 0 : -EIO; } -- cgit From b3980e48528c4d2a9e70b145a5bba328b73a0f93 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 1 Aug 2019 23:25:49 +0900 Subject: arm64: kprobes: Recover pstate.D in single-step exception handler kprobes manipulates the interrupted PSTATE for single step, and doesn't restore it. Thus, if we put a kprobe where the pstate.D (debug) masked, the mask will be cleared after the kprobe hits. Moreover, in the most complicated case, this can lead a kernel crash with below message when a nested kprobe hits. [ 152.118921] Unexpected kernel single-step exception at EL1 When the 1st kprobe hits, do_debug_exception() will be called. At this point, debug exception (= pstate.D) must be masked (=1). But if another kprobes hits before single-step of the first kprobe (e.g. inside user pre_handler), it unmask the debug exception (pstate.D = 0) and return. Then, when the 1st kprobe setting up single-step, it saves current DAIF, mask DAIF, enable single-step, and restore DAIF. However, since "D" flag in DAIF is cleared by the 2nd kprobe, the single-step exception happens soon after restoring DAIF. This has been introduced by commit 7419333fa15e ("arm64: kprobe: Always clear pstate.D in breakpoint exception handler") To solve this issue, this stores all DAIF bits and restore it after single stepping. Reported-by: Naresh Kamboju Fixes: 7419333fa15e ("arm64: kprobe: Always clear pstate.D in breakpoint exception handler") Reviewed-by: James Morse Tested-by: James Morse Signed-off-by: Masami Hiramatsu Signed-off-by: Will Deacon --- arch/arm64/include/asm/daifflags.h | 2 ++ arch/arm64/kernel/probes/kprobes.c | 40 ++++++-------------------------------- 2 files changed, 8 insertions(+), 34 deletions(-) diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h index 987926ed535e..063c964af705 100644 --- a/arch/arm64/include/asm/daifflags.h +++ b/arch/arm64/include/asm/daifflags.h @@ -13,6 +13,8 @@ #define DAIF_PROCCTX 0 #define DAIF_PROCCTX_NOIRQ PSR_I_BIT #define DAIF_ERRCTX (PSR_I_BIT | PSR_A_BIT) +#define DAIF_MASK (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT) + /* mask/save/unmask/restore all exceptions, including interrupts. */ static inline void local_daif_mask(void) diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c index bd5dfffca272..c4452827419b 100644 --- a/arch/arm64/kernel/probes/kprobes.c +++ b/arch/arm64/kernel/probes/kprobes.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -167,33 +168,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p) __this_cpu_write(current_kprobe, p); } -/* - * When PSTATE.D is set (masked), then software step exceptions can not be - * generated. - * SPSR's D bit shows the value of PSTATE.D immediately before the - * exception was taken. PSTATE.D is set while entering into any exception - * mode, however software clears it for any normal (none-debug-exception) - * mode in the exception entry. Therefore, when we are entering into kprobe - * breakpoint handler from any normal mode then SPSR.D bit is already - * cleared, however it is set when we are entering from any debug exception - * mode. - * Since we always need to generate single step exception after a kprobe - * breakpoint exception therefore we need to clear it unconditionally, when - * we become sure that the current breakpoint exception is for kprobe. - */ -static void __kprobes -spsr_set_debug_flag(struct pt_regs *regs, int mask) -{ - unsigned long spsr = regs->pstate; - - if (mask) - spsr |= PSR_D_BIT; - else - spsr &= ~PSR_D_BIT; - - regs->pstate = spsr; -} - /* * Interrupts need to be disabled before single-step mode is set, and not * reenabled until after single-step mode ends. @@ -205,17 +179,17 @@ spsr_set_debug_flag(struct pt_regs *regs, int mask) static void __kprobes kprobes_save_local_irqflag(struct kprobe_ctlblk *kcb, struct pt_regs *regs) { - kcb->saved_irqflag = regs->pstate; + kcb->saved_irqflag = regs->pstate & DAIF_MASK; regs->pstate |= PSR_I_BIT; + /* Unmask PSTATE.D for enabling software step exceptions. */ + regs->pstate &= ~PSR_D_BIT; } static void __kprobes kprobes_restore_local_irqflag(struct kprobe_ctlblk *kcb, struct pt_regs *regs) { - if (kcb->saved_irqflag & PSR_I_BIT) - regs->pstate |= PSR_I_BIT; - else - regs->pstate &= ~PSR_I_BIT; + regs->pstate &= ~DAIF_MASK; + regs->pstate |= kcb->saved_irqflag; } static void __kprobes @@ -252,8 +226,6 @@ static void __kprobes setup_singlestep(struct kprobe *p, set_ss_context(kcb, slot); /* mark pending ss */ - spsr_set_debug_flag(regs, 0); - /* IRQs and single stepping do not mix well. */ kprobes_save_local_irqflag(kcb, regs); kernel_enable_single_step(regs); -- cgit From d8bb6718c4db9bcd075dde7ff55d46091ccfae15 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 1 Aug 2019 23:36:14 +0900 Subject: arm64: Make debug exception handlers visible from RCU Make debug exceptions visible from RCU so that synchronize_rcu() correctly track the debug exception handler. This also introduces sanity checks for user-mode exceptions as same as x86's ist_enter()/ist_exit(). The debug exception can interrupt in idle task. For example, it warns if we put a kprobe on a function called from idle task as below. The warning message showed that the rcu_read_lock() caused this problem. But actually, this means the RCU is lost the context which is already in NMI/IRQ. /sys/kernel/debug/tracing # echo p default_idle_call >> kprobe_events /sys/kernel/debug/tracing # echo 1 > events/kprobes/enable /sys/kernel/debug/tracing # [ 135.122237] [ 135.125035] ============================= [ 135.125310] WARNING: suspicious RCU usage [ 135.125581] 5.2.0-08445-g9187c508bdc7 #20 Not tainted [ 135.125904] ----------------------------- [ 135.126205] include/linux/rcupdate.h:594 rcu_read_lock() used illegally while idle! [ 135.126839] [ 135.126839] other info that might help us debug this: [ 135.126839] [ 135.127410] [ 135.127410] RCU used illegally from idle CPU! [ 135.127410] rcu_scheduler_active = 2, debug_locks = 1 [ 135.128114] RCU used illegally from extended quiescent state! [ 135.128555] 1 lock held by swapper/0/0: [ 135.128944] #0: (____ptrval____) (rcu_read_lock){....}, at: call_break_hook+0x0/0x178 [ 135.130499] [ 135.130499] stack backtrace: [ 135.131192] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.2.0-08445-g9187c508bdc7 #20 [ 135.131841] Hardware name: linux,dummy-virt (DT) [ 135.132224] Call trace: [ 135.132491] dump_backtrace+0x0/0x140 [ 135.132806] show_stack+0x24/0x30 [ 135.133133] dump_stack+0xc4/0x10c [ 135.133726] lockdep_rcu_suspicious+0xf8/0x108 [ 135.134171] call_break_hook+0x170/0x178 [ 135.134486] brk_handler+0x28/0x68 [ 135.134792] do_debug_exception+0x90/0x150 [ 135.135051] el1_dbg+0x18/0x8c [ 135.135260] default_idle_call+0x0/0x44 [ 135.135516] cpu_startup_entry+0x2c/0x30 [ 135.135815] rest_init+0x1b0/0x280 [ 135.136044] arch_call_rest_init+0x14/0x1c [ 135.136305] start_kernel+0x4d4/0x500 [ 135.136597] So make debug exception visible to RCU can fix this warning. Reported-by: Naresh Kamboju Acked-by: Paul E. McKenney Signed-off-by: Masami Hiramatsu Signed-off-by: Will Deacon --- arch/arm64/mm/fault.c | 57 +++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 49 insertions(+), 8 deletions(-) diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 9568c116ac7f..cfd65b63f36f 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -777,6 +777,53 @@ void __init hook_debug_fault_code(int nr, debug_fault_info[nr].name = name; } +/* + * In debug exception context, we explicitly disable preemption despite + * having interrupts disabled. + * This serves two purposes: it makes it much less likely that we would + * accidentally schedule in exception context and it will force a warning + * if we somehow manage to schedule by accident. + */ +static void debug_exception_enter(struct pt_regs *regs) +{ + /* + * Tell lockdep we disabled irqs in entry.S. Do nothing if they were + * already disabled to preserve the last enabled/disabled addresses. + */ + if (interrupts_enabled(regs)) + trace_hardirqs_off(); + + if (user_mode(regs)) { + RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU"); + } else { + /* + * We might have interrupted pretty much anything. In + * fact, if we're a debug exception, we can even interrupt + * NMI processing. We don't want this code makes in_nmi() + * to return true, but we need to notify RCU. + */ + rcu_nmi_enter(); + } + + preempt_disable(); + + /* This code is a bit fragile. Test it. */ + RCU_LOCKDEP_WARN(!rcu_is_watching(), "exception_enter didn't work"); +} +NOKPROBE_SYMBOL(debug_exception_enter); + +static void debug_exception_exit(struct pt_regs *regs) +{ + preempt_enable_no_resched(); + + if (!user_mode(regs)) + rcu_nmi_exit(); + + if (interrupts_enabled(regs)) + trace_hardirqs_on(); +} +NOKPROBE_SYMBOL(debug_exception_exit); + #ifdef CONFIG_ARM64_ERRATUM_1463225 DECLARE_PER_CPU(int, __in_cortex_a76_erratum_1463225_wa); @@ -817,12 +864,7 @@ asmlinkage void __exception do_debug_exception(unsigned long addr_if_watchpoint, if (cortex_a76_erratum_1463225_debug_handler(regs)) return; - /* - * Tell lockdep we disabled irqs in entry.S. Do nothing if they were - * already disabled to preserve the last enabled/disabled addresses. - */ - if (interrupts_enabled(regs)) - trace_hardirqs_off(); + debug_exception_enter(regs); if (user_mode(regs) && !is_ttbr0_addr(pc)) arm64_apply_bp_hardening(); @@ -832,7 +874,6 @@ asmlinkage void __exception do_debug_exception(unsigned long addr_if_watchpoint, inf->sig, inf->code, (void __user *)pc, esr); } - if (interrupts_enabled(regs)) - trace_hardirqs_on(); + debug_exception_exit(regs); } NOKPROBE_SYMBOL(do_debug_exception); -- cgit From a4127952859a869cf3fc5a49547dbe2ffa2eac89 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 1 Aug 2019 16:49:01 +0300 Subject: spi: pxa2xx: Add support for Intel Tiger Lake Intel Tiger Lake -LP LPSS SPI controller is otherwise similar than Cannon Lake but has more controllers and up to two chip selects per controller. Signed-off-by: Jarkko Nikula Link: https://lore.kernel.org/r/20190801134901.12635-1-jarkko.nikula@linux.intel.com Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 22513caf2000..bb6a14d1ab0f 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1457,6 +1457,14 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = { { PCI_VDEVICE(INTEL, 0x02aa), LPSS_CNL_SSP }, { PCI_VDEVICE(INTEL, 0x02ab), LPSS_CNL_SSP }, { PCI_VDEVICE(INTEL, 0x02fb), LPSS_CNL_SSP }, + /* TGL-LP */ + { PCI_VDEVICE(INTEL, 0xa0aa), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0xa0ab), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0xa0de), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0xa0df), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0xa0fb), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0xa0fd), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0xa0fe), LPSS_CNL_SSP }, { }, }; -- cgit From cd28aa2e056cd1ea79fc5f24eed0ce868c6cab5c Mon Sep 17 00:00:00 2001 From: Wang Xiayang Date: Wed, 31 Jul 2019 15:31:14 +0800 Subject: can: sja1000: force the string buffer NULL-terminated strncpy() does not ensure NULL-termination when the input string size equals to the destination buffer size IFNAMSIZ. The output string 'name' is passed to dev_info which relies on NULL-termination. Use strlcpy() instead. This issue is identified by a Coccinelle script. Signed-off-by: Wang Xiayang Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/peak_pcmcia.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c index 185c7f7d38a4..5e0d5e8101c8 100644 --- a/drivers/net/can/sja1000/peak_pcmcia.c +++ b/drivers/net/can/sja1000/peak_pcmcia.c @@ -479,7 +479,7 @@ static void pcan_free_channels(struct pcan_pccard *card) if (!netdev) continue; - strncpy(name, netdev->name, IFNAMSIZ); + strlcpy(name, netdev->name, IFNAMSIZ); unregister_sja1000dev(netdev); -- cgit From e787f19373b8a5fa24087800ed78314fd17b984a Mon Sep 17 00:00:00 2001 From: Wang Xiayang Date: Wed, 31 Jul 2019 15:25:59 +0800 Subject: can: peak_usb: force the string buffer NULL-terminated strncpy() does not ensure NULL-termination when the input string size equals to the destination buffer size IFNAMSIZ. The output string is passed to dev_info() which relies on the NULL-termination. Use strlcpy() instead. This issue is identified by a Coccinelle script. Signed-off-by: Wang Xiayang Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c index 22b9c8e6d040..65dce642b86b 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c @@ -855,7 +855,7 @@ static void peak_usb_disconnect(struct usb_interface *intf) dev_prev_siblings = dev->prev_siblings; dev->state &= ~PCAN_USB_STATE_CONNECTED; - strncpy(name, netdev->name, IFNAMSIZ); + strlcpy(name, netdev->name, IFNAMSIZ); unregister_netdev(netdev); -- cgit From 30a8beeb3042f49d0537b7050fd21b490166a3d9 Mon Sep 17 00:00:00 2001 From: Tomas Bortoli Date: Wed, 31 Jul 2019 10:54:47 -0400 Subject: can: peak_usb: pcan_usb_fd: Fix info-leaks to USB devices Uninitialized Kernel memory can leak to USB devices. Fix by using kzalloc() instead of kmalloc() on the affected buffers. Signed-off-by: Tomas Bortoli Reported-by: syzbot+513e4d0985298538bf9b@syzkaller.appspotmail.com Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c index 34761c3a6286..47cc1ff5b88e 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c @@ -841,7 +841,7 @@ static int pcan_usb_fd_init(struct peak_usb_device *dev) goto err_out; /* allocate command buffer once for all for the interface */ - pdev->cmd_buffer_addr = kmalloc(PCAN_UFD_CMD_BUFFER_SIZE, + pdev->cmd_buffer_addr = kzalloc(PCAN_UFD_CMD_BUFFER_SIZE, GFP_KERNEL); if (!pdev->cmd_buffer_addr) goto err_out_1; -- cgit From ead16e53c2f0ed946d82d4037c630e2f60f4ab69 Mon Sep 17 00:00:00 2001 From: Tomas Bortoli Date: Wed, 31 Jul 2019 10:54:47 -0400 Subject: can: peak_usb: pcan_usb_pro: Fix info-leaks to USB devices Uninitialized Kernel memory can leak to USB devices. Fix by using kzalloc() instead of kmalloc() on the affected buffers. Signed-off-by: Tomas Bortoli Reported-by: syzbot+d6a5a1a3657b596ef132@syzkaller.appspotmail.com Fixes: f14e22435a27 ("net: can: peak_usb: Do not do dma on the stack") Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c index 178bb7cff0c1..53cb2f72bdd0 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c @@ -494,7 +494,7 @@ static int pcan_usb_pro_drv_loaded(struct peak_usb_device *dev, int loaded) u8 *buffer; int err; - buffer = kmalloc(PCAN_USBPRO_FCT_DRVLD_REQ_LEN, GFP_KERNEL); + buffer = kzalloc(PCAN_USBPRO_FCT_DRVLD_REQ_LEN, GFP_KERNEL); if (!buffer) return -ENOMEM; -- cgit From 3cdd98606750a5a1d1c8bcda5b481cb86ed67b3b Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Mon, 29 Jul 2019 01:23:46 +0200 Subject: s390/zcrypt: adjust switch fall through comments for -Wimplicit-fallthrough Silence the following warnings when built with -Wimplicit-fallthrough=3 enabled by default since 5.3-rc2: In file included from ./include/linux/preempt.h:11, from ./include/linux/spinlock.h:51, from ./include/linux/mmzone.h:8, from ./include/linux/gfp.h:6, from ./include/linux/slab.h:15, from drivers/s390/crypto/ap_queue.c:13: drivers/s390/crypto/ap_queue.c: In function 'ap_sm_recv': ./include/linux/list.h:577:2: warning: this statement may fall through [-Wimplicit-fallthrough=] 577 | for (pos = list_first_entry(head, typeof(*pos), member); \ | ^~~ drivers/s390/crypto/ap_queue.c:147:3: note: in expansion of macro 'list_for_each_entry' 147 | list_for_each_entry(ap_msg, &aq->pendingq, list) { | ^~~~~~~~~~~~~~~~~~~ drivers/s390/crypto/ap_queue.c:155:2: note: here 155 | case AP_RESPONSE_NO_PENDING_REPLY: | ^~~~ drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_ep11_xcrb': drivers/s390/crypto/zcrypt_msgtype6.c:871:6: warning: this statement may fall through [-Wimplicit-fallthrough=] 871 | if (msg->cprbx.cprb_ver_id == 0x04) | ^ drivers/s390/crypto/zcrypt_msgtype6.c:874:2: note: here 874 | default: /* Unknown response type, this should NEVER EVER happen */ | ^~~~~~~ drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_rng': drivers/s390/crypto/zcrypt_msgtype6.c:901:6: warning: this statement may fall through [-Wimplicit-fallthrough=] 901 | if (msg->cprbx.cprb_ver_id == 0x02) | ^ drivers/s390/crypto/zcrypt_msgtype6.c:907:2: note: here 907 | default: /* Unknown response type, this should NEVER EVER happen */ | ^~~~~~~ drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_xcrb': drivers/s390/crypto/zcrypt_msgtype6.c:838:6: warning: this statement may fall through [-Wimplicit-fallthrough=] 838 | if (msg->cprbx.cprb_ver_id == 0x02) | ^ drivers/s390/crypto/zcrypt_msgtype6.c:844:2: note: here 844 | default: /* Unknown response type, this should NEVER EVER happen */ | ^~~~~~~ drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_ica': drivers/s390/crypto/zcrypt_msgtype6.c:801:6: warning: this statement may fall through [-Wimplicit-fallthrough=] 801 | if (msg->cprbx.cprb_ver_id == 0x02) | ^ drivers/s390/crypto/zcrypt_msgtype6.c:808:2: note: here 808 | default: /* Unknown response type, this should NEVER EVER happen */ | ^~~~~~~ Acked-by: Patrick Steuer Signed-off-by: Vasily Gorbik --- drivers/s390/crypto/ap_queue.c | 1 + drivers/s390/crypto/zcrypt_msgtype6.c | 17 ++++------------- 2 files changed, 5 insertions(+), 13 deletions(-) diff --git a/drivers/s390/crypto/ap_queue.c b/drivers/s390/crypto/ap_queue.c index 5ea83dc4f1d7..dad2be333d82 100644 --- a/drivers/s390/crypto/ap_queue.c +++ b/drivers/s390/crypto/ap_queue.c @@ -152,6 +152,7 @@ static struct ap_queue_status ap_sm_recv(struct ap_queue *aq) ap_msg->receive(aq, ap_msg, aq->reply); break; } + /* fall through */ case AP_RESPONSE_NO_PENDING_REPLY: if (!status.queue_empty || aq->queue_count <= 0) break; diff --git a/drivers/s390/crypto/zcrypt_msgtype6.c b/drivers/s390/crypto/zcrypt_msgtype6.c index 12fe9deb265e..a36251d138fb 100644 --- a/drivers/s390/crypto/zcrypt_msgtype6.c +++ b/drivers/s390/crypto/zcrypt_msgtype6.c @@ -801,10 +801,7 @@ static int convert_response_ica(struct zcrypt_queue *zq, if (msg->cprbx.cprb_ver_id == 0x02) return convert_type86_ica(zq, reply, outputdata, outputdatalength); - /* - * Fall through, no break, incorrect cprb version is an unknown - * response - */ + /* fall through - wrong cprb version is an unknown response */ default: /* Unknown response type, this should NEVER EVER happen */ zq->online = 0; pr_err("Cryptographic device %02x.%04x failed and was set offline\n", @@ -837,10 +834,7 @@ static int convert_response_xcrb(struct zcrypt_queue *zq, } if (msg->cprbx.cprb_ver_id == 0x02) return convert_type86_xcrb(zq, reply, xcRB); - /* - * Fall through, no break, incorrect cprb version is an unknown - * response - */ + /* fall through - wrong cprb version is an unknown response */ default: /* Unknown response type, this should NEVER EVER happen */ xcRB->status = 0x0008044DL; /* HDD_InvalidParm */ zq->online = 0; @@ -870,7 +864,7 @@ static int convert_response_ep11_xcrb(struct zcrypt_queue *zq, return convert_error(zq, reply); if (msg->cprbx.cprb_ver_id == 0x04) return convert_type86_ep11_xcrb(zq, reply, xcRB); - /* Fall through, no break, incorrect cprb version is an unknown resp.*/ + /* fall through - wrong cprb version is an unknown resp */ default: /* Unknown response type, this should NEVER EVER happen */ zq->online = 0; pr_err("Cryptographic device %02x.%04x failed and was set offline\n", @@ -900,10 +894,7 @@ static int convert_response_rng(struct zcrypt_queue *zq, return -EINVAL; if (msg->cprbx.cprb_ver_id == 0x02) return convert_type86_rng(zq, reply, data); - /* - * Fall through, no break, incorrect cprb version is an unknown - * response - */ + /* fall through - wrong cprb version is an unknown response */ default: /* Unknown response type, this should NEVER EVER happen */ zq->online = 0; pr_err("Cryptographic device %02x.%04x failed and was set offline\n", -- cgit From 63dc6e63e682cf756ab8c18aa1b85b0efb358dad Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 1 Aug 2019 13:44:58 +0100 Subject: Revert "drm/vgem: fix cache synchronization on arm/arm64" commit 7e9e5ead55be ("drm/vgem: fix cache synchronization on arm/arm64") broke all of the !llc i915-vgem coherency tests in CI, and left the HW very, very unhappy (which is even more scary). Fixes: 7e9e5ead55be ("drm/vgem: fix cache synchronization on arm/arm64") Signed-off-by: Chris Wilson Cc: Daniel Vetter Cc: Rob Clark Cc: Sean Paul Acked-by: Sean Paul Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20190801124458.24949-1-chris@chris-wilson.co.uk --- drivers/gpu/drm/vgem/vgem_drv.c | 130 +++++++++++++++------------------------- 1 file changed, 47 insertions(+), 83 deletions(-) diff --git a/drivers/gpu/drm/vgem/vgem_drv.c b/drivers/gpu/drm/vgem/vgem_drv.c index fc04803ff403..11a8f99ba18c 100644 --- a/drivers/gpu/drm/vgem/vgem_drv.c +++ b/drivers/gpu/drm/vgem/vgem_drv.c @@ -47,16 +47,10 @@ static struct vgem_device { struct platform_device *platform; } *vgem_device; -static void sync_and_unpin(struct drm_vgem_gem_object *bo); -static struct page **pin_and_sync(struct drm_vgem_gem_object *bo); - static void vgem_gem_free_object(struct drm_gem_object *obj) { struct drm_vgem_gem_object *vgem_obj = to_vgem_bo(obj); - if (!obj->import_attach) - sync_and_unpin(vgem_obj); - kvfree(vgem_obj->pages); mutex_destroy(&vgem_obj->pages_lock); @@ -84,15 +78,40 @@ static vm_fault_t vgem_gem_fault(struct vm_fault *vmf) return VM_FAULT_SIGBUS; mutex_lock(&obj->pages_lock); - if (!obj->pages) - pin_and_sync(obj); if (obj->pages) { get_page(obj->pages[page_offset]); vmf->page = obj->pages[page_offset]; ret = 0; } mutex_unlock(&obj->pages_lock); + if (ret) { + struct page *page; + + page = shmem_read_mapping_page( + file_inode(obj->base.filp)->i_mapping, + page_offset); + if (!IS_ERR(page)) { + vmf->page = page; + ret = 0; + } else switch (PTR_ERR(page)) { + case -ENOSPC: + case -ENOMEM: + ret = VM_FAULT_OOM; + break; + case -EBUSY: + ret = VM_FAULT_RETRY; + break; + case -EFAULT: + case -EINVAL: + ret = VM_FAULT_SIGBUS; + break; + default: + WARN_ON(PTR_ERR(page)); + ret = VM_FAULT_SIGBUS; + break; + } + } return ret; } @@ -258,93 +277,32 @@ static const struct file_operations vgem_driver_fops = { .release = drm_release, }; -/* Called under pages_lock, except in free path (where it can't race): */ -static void sync_and_unpin(struct drm_vgem_gem_object *bo) -{ - struct drm_device *dev = bo->base.dev; - - if (bo->table) { - dma_sync_sg_for_cpu(dev->dev, bo->table->sgl, - bo->table->nents, DMA_BIDIRECTIONAL); - sg_free_table(bo->table); - kfree(bo->table); - bo->table = NULL; - } - - if (bo->pages) { - drm_gem_put_pages(&bo->base, bo->pages, true, true); - bo->pages = NULL; - } -} - -static struct page **pin_and_sync(struct drm_vgem_gem_object *bo) -{ - struct drm_device *dev = bo->base.dev; - int npages = bo->base.size >> PAGE_SHIFT; - struct page **pages; - struct sg_table *sgt; - - WARN_ON(!mutex_is_locked(&bo->pages_lock)); - - pages = drm_gem_get_pages(&bo->base); - if (IS_ERR(pages)) { - bo->pages_pin_count--; - mutex_unlock(&bo->pages_lock); - return pages; - } - - sgt = drm_prime_pages_to_sg(pages, npages); - if (IS_ERR(sgt)) { - dev_err(dev->dev, - "failed to allocate sgt: %ld\n", - PTR_ERR(bo->table)); - drm_gem_put_pages(&bo->base, pages, false, false); - mutex_unlock(&bo->pages_lock); - return ERR_CAST(bo->table); - } - - /* - * Flush the object from the CPU cache so that importers - * can rely on coherent indirect access via the exported - * dma-address. - */ - dma_sync_sg_for_device(dev->dev, sgt->sgl, - sgt->nents, DMA_BIDIRECTIONAL); - - bo->pages = pages; - bo->table = sgt; - - return pages; -} - static struct page **vgem_pin_pages(struct drm_vgem_gem_object *bo) { - struct page **pages; - mutex_lock(&bo->pages_lock); - if (bo->pages_pin_count++ == 0 && !bo->pages) { - pages = pin_and_sync(bo); - } else { - WARN_ON(!bo->pages); - pages = bo->pages; + if (bo->pages_pin_count++ == 0) { + struct page **pages; + + pages = drm_gem_get_pages(&bo->base); + if (IS_ERR(pages)) { + bo->pages_pin_count--; + mutex_unlock(&bo->pages_lock); + return pages; + } + + bo->pages = pages; } mutex_unlock(&bo->pages_lock); - return pages; + return bo->pages; } static void vgem_unpin_pages(struct drm_vgem_gem_object *bo) { - /* - * We shouldn't hit this for imported bo's.. in the import - * case we don't own the scatter-table - */ - WARN_ON(bo->base.import_attach); - mutex_lock(&bo->pages_lock); if (--bo->pages_pin_count == 0) { - WARN_ON(!bo->table); - sync_and_unpin(bo); + drm_gem_put_pages(&bo->base, bo->pages, true, true); + bo->pages = NULL; } mutex_unlock(&bo->pages_lock); } @@ -352,12 +310,18 @@ static void vgem_unpin_pages(struct drm_vgem_gem_object *bo) static int vgem_prime_pin(struct drm_gem_object *obj) { struct drm_vgem_gem_object *bo = to_vgem_bo(obj); + long n_pages = obj->size >> PAGE_SHIFT; struct page **pages; pages = vgem_pin_pages(bo); if (IS_ERR(pages)) return PTR_ERR(pages); + /* Flush the object from the CPU cache so that importers can rely + * on coherent indirect access via the exported dma-address. + */ + drm_clflush_pages(pages, n_pages); + return 0; } -- cgit From af655cc5aae800f30cd71c5d72d36bd3ecb1e7df Mon Sep 17 00:00:00 2001 From: Thong Thai Date: Thu, 25 Jul 2019 11:21:58 -0400 Subject: drm/amd/amdgpu/vcn_v2_0: Mark RB commands as KMD commands MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sets the CMD_SOURCE bit for VCN 2.0 Decoder Ring Buffer commands. This bit was previously set by the RBC HW on older firmware. Newer firmware uses a SW RBC and this bit has to be set by the driver. Signed-off-by: Thong Thai Reviewed-by: Leo Liu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.h | 1 + drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c | 12 ++++++------ 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.h index 99f14fcc1460..19661c645703 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.h @@ -30,6 +30,7 @@ #define AMDGPU_VCN_FIRMWARE_OFFSET 256 #define AMDGPU_VCN_MAX_ENC_RINGS 3 +#define VCN_DEC_KMD_CMD 0x80000000 #define VCN_DEC_CMD_FENCE 0x00000000 #define VCN_DEC_CMD_TRAP 0x00000001 #define VCN_DEC_CMD_WRITE_REG 0x00000004 diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c index 1cfc2620b2dd..46593e323e77 100644 --- a/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c @@ -1485,7 +1485,7 @@ static void vcn_v2_0_dec_ring_insert_start(struct amdgpu_ring *ring) amdgpu_ring_write(ring, PACKET0(mmUVD_GPCOM_VCPU_DATA0_INTERNAL_OFFSET, 0)); amdgpu_ring_write(ring, 0); amdgpu_ring_write(ring, PACKET0(mmUVD_GPCOM_VCPU_CMD_INTERNAL_OFFSET, 0)); - amdgpu_ring_write(ring, VCN_DEC_CMD_PACKET_START << 1); + amdgpu_ring_write(ring, VCN_DEC_KMD_CMD | (VCN_DEC_CMD_PACKET_START << 1)); } /** @@ -1498,7 +1498,7 @@ static void vcn_v2_0_dec_ring_insert_start(struct amdgpu_ring *ring) static void vcn_v2_0_dec_ring_insert_end(struct amdgpu_ring *ring) { amdgpu_ring_write(ring, PACKET0(mmUVD_GPCOM_VCPU_CMD_INTERNAL_OFFSET, 0)); - amdgpu_ring_write(ring, VCN_DEC_CMD_PACKET_END << 1); + amdgpu_ring_write(ring, VCN_DEC_KMD_CMD | (VCN_DEC_CMD_PACKET_END << 1)); } /** @@ -1543,7 +1543,7 @@ static void vcn_v2_0_dec_ring_emit_fence(struct amdgpu_ring *ring, u64 addr, u64 amdgpu_ring_write(ring, upper_32_bits(addr) & 0xff); amdgpu_ring_write(ring, PACKET0(mmUVD_GPCOM_VCPU_CMD_INTERNAL_OFFSET, 0)); - amdgpu_ring_write(ring, VCN_DEC_CMD_FENCE << 1); + amdgpu_ring_write(ring, VCN_DEC_KMD_CMD | (VCN_DEC_CMD_FENCE << 1)); amdgpu_ring_write(ring, PACKET0(mmUVD_GPCOM_VCPU_DATA0_INTERNAL_OFFSET, 0)); amdgpu_ring_write(ring, 0); @@ -1553,7 +1553,7 @@ static void vcn_v2_0_dec_ring_emit_fence(struct amdgpu_ring *ring, u64 addr, u64 amdgpu_ring_write(ring, PACKET0(mmUVD_GPCOM_VCPU_CMD_INTERNAL_OFFSET, 0)); - amdgpu_ring_write(ring, VCN_DEC_CMD_TRAP << 1); + amdgpu_ring_write(ring, VCN_DEC_KMD_CMD | (VCN_DEC_CMD_TRAP << 1)); } /** @@ -1597,7 +1597,7 @@ static void vcn_v2_0_dec_ring_emit_reg_wait(struct amdgpu_ring *ring, amdgpu_ring_write(ring, PACKET0(mmUVD_GPCOM_VCPU_CMD_INTERNAL_OFFSET, 0)); - amdgpu_ring_write(ring, VCN_DEC_CMD_REG_READ_COND_WAIT << 1); + amdgpu_ring_write(ring, VCN_DEC_KMD_CMD | (VCN_DEC_CMD_REG_READ_COND_WAIT << 1)); } static void vcn_v2_0_dec_ring_emit_vm_flush(struct amdgpu_ring *ring, @@ -1626,7 +1626,7 @@ static void vcn_v2_0_dec_ring_emit_wreg(struct amdgpu_ring *ring, amdgpu_ring_write(ring, PACKET0(mmUVD_GPCOM_VCPU_CMD_INTERNAL_OFFSET, 0)); - amdgpu_ring_write(ring, VCN_DEC_CMD_WRITE_REG << 1); + amdgpu_ring_write(ring, VCN_DEC_KMD_CMD | (VCN_DEC_CMD_WRITE_REG << 1)); } /** -- cgit From d1836f3813ee0742a2067d5f4d78e811d2b76d9d Mon Sep 17 00:00:00 2001 From: Thong Thai Date: Thu, 25 Jul 2019 11:26:56 -0400 Subject: drm/amd/amdgpu/vcn_v2_0: Move VCN 2.0 specific dec ring test to vcn_v2_0 VCN 2.0 firmware now requires a packet start command to be sent before any other decode ring buffer command. Signed-off-by: Thong Thai Reviewed-by: Leo Liu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c index 46593e323e77..dfde886cc6bd 100644 --- a/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c @@ -2079,6 +2079,36 @@ static int vcn_v2_0_process_interrupt(struct amdgpu_device *adev, return 0; } +static int vcn_v2_0_dec_ring_test_ring(struct amdgpu_ring *ring) +{ + struct amdgpu_device *adev = ring->adev; + uint32_t tmp = 0; + unsigned i; + int r; + + WREG32(adev->vcn.external.scratch9, 0xCAFEDEAD); + r = amdgpu_ring_alloc(ring, 4); + if (r) + return r; + amdgpu_ring_write(ring, PACKET0(mmUVD_GPCOM_VCPU_CMD_INTERNAL_OFFSET, 0)); + amdgpu_ring_write(ring, VCN_DEC_KMD_CMD | (VCN_DEC_CMD_PACKET_START << 1)); + amdgpu_ring_write(ring, PACKET0(adev->vcn.internal.scratch9, 0)); + amdgpu_ring_write(ring, 0xDEADBEEF); + amdgpu_ring_commit(ring); + for (i = 0; i < adev->usec_timeout; i++) { + tmp = RREG32(adev->vcn.external.scratch9); + if (tmp == 0xDEADBEEF) + break; + DRM_UDELAY(1); + } + + if (i >= adev->usec_timeout) + r = -ETIMEDOUT; + + return r; +} + + static int vcn_v2_0_set_powergating_state(void *handle, enum amd_powergating_state state) { @@ -2142,7 +2172,7 @@ static const struct amdgpu_ring_funcs vcn_v2_0_dec_ring_vm_funcs = { .emit_ib = vcn_v2_0_dec_ring_emit_ib, .emit_fence = vcn_v2_0_dec_ring_emit_fence, .emit_vm_flush = vcn_v2_0_dec_ring_emit_vm_flush, - .test_ring = amdgpu_vcn_dec_ring_test_ring, + .test_ring = vcn_v2_0_dec_ring_test_ring, .test_ib = amdgpu_vcn_dec_ring_test_ib, .insert_nop = vcn_v2_0_dec_ring_insert_nop, .insert_start = vcn_v2_0_dec_ring_insert_start, -- cgit From 783bda5e41acc71f98336e1a402c180f9748e5dc Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 2 Aug 2019 17:33:35 +0900 Subject: usb: host: xhci-rcar: Fix timeout in xhci_suspend() When a USB device is connected to the host controller and the system enters suspend, the following error happens in xhci_suspend(): xhci-hcd ee000000.usb: WARN: xHC CMD_RUN timeout Since the firmware/internal CPU control the USBSTS.STS_HALT and the process speed is down when the roothub port enters U3, long delay for the handshake of STS_HALT is neeed in xhci_suspend(). So, this patch adds to set the XHCI_SLOW_SUSPEND. Fixes: 435cc1138ec9 ("usb: host: xhci-plat: set resume_quirk() for R-Car controllers") Cc: # v4.12+ Signed-off-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/1564734815-17964-1-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-rcar.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index 671bce18782c..8616c52849c6 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -238,10 +238,15 @@ int xhci_rcar_init_quirk(struct usb_hcd *hcd) * pointers. So, this driver clears the AC64 bit of xhci->hcc_params * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in * xhci_gen_setup(). + * + * And, since the firmware/internal CPU control the USBSTS.STS_HALT + * and the process speed is down when the roothub port enters U3, + * long delay for the handshake of STS_HALT is neeed in xhci_suspend(). */ if (xhci_rcar_is_gen2(hcd->self.controller) || - xhci_rcar_is_gen3(hcd->self.controller)) - xhci->quirks |= XHCI_NO_64BIT_SUPPORT; + xhci_rcar_is_gen3(hcd->self.controller)) { + xhci->quirks |= XHCI_NO_64BIT_SUPPORT | XHCI_SLOW_SUSPEND; + } if (!xhci_rcar_wait_for_pll_active(hcd)) return -ETIMEDOUT; -- cgit From cb53c517285f8d2548d11422173ca8ec7b9c8f44 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Fri, 2 Aug 2019 18:00:44 +0300 Subject: xhci: Fix NULL pointer dereference at endpoint zero reset. Usb core will reset the default control endpoint "ep0" before resetting a device. if the endpoint has a valid pointer back to the usb device then the xhci driver reset callback will try to clear the toggle for the endpoint. ep0 didn't use to have this pointer set as ep0 was always allocated by default together with a xhci slot for the usb device. Other endpoints got their usb device pointer set in xhci_add_endpoint() This changed with commit ef513be0a905 ("usb: xhci: Add Clear_TT_Buffer") which sets the pointer for any endpoint on a FS/LS device behind a HS hub that halts, including ep0. If xHC controller needs to be reset at resume, then all the xhci slots will be lost. Slots will be reenabled and reallocated at device reset, but unlike other endpoints the ep0 is reset before device reset, while the xhci slot may still be invalid, causing NULL pointer dereference. Fix it by checking that the endpoint has both a usb device pointer and valid xhci slot before trying to clear the toggle. This issue was not seen earlier as ep0 didn't use to have a valid usb device pointer, and other endpoints were only reset after device reset when xhci slots were properly reenabled. Reported-by: Bob Gleitsmann Reported-by: Enric Balletbo Serra Fixes: ef513be0a905 ("usb: xhci: Add Clear_TT_Buffer") Signed-off-by: Mathias Nyman Tested-by: Enric Balletbo i Serra Link: https://lore.kernel.org/r/1564758044-24748-1-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 248cd7a8b163..03d1e552769b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3089,8 +3089,18 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd, return; udev = (struct usb_device *) host_ep->hcpriv; vdev = xhci->devs[udev->slot_id]; + + /* + * vdev may be lost due to xHC restore error and re-initialization + * during S3/S4 resume. A new vdev will be allocated later by + * xhci_discover_or_reset_device() + */ + if (!udev->slot_id || !vdev) + return; ep_index = xhci_get_endpoint_index(&host_ep->desc); ep = &vdev->eps[ep_index]; + if (!ep) + return; /* Bail out if toggle is already being cleared by a endpoint reset */ if (ep->ep_state & EP_HARD_CLEAR_TOGGLE) { -- cgit From 88d02c9ba2e83fc22d37ccb1f11c62ea6fc9ae50 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 2 Aug 2019 09:03:42 -0700 Subject: usb: typec: tcpm: Ignore unsupported/unknown alternate mode requests TCPM may receive PD messages associated with unknown or unsupported alternate modes. If that happens, calls to typec_match_altmode() will return NULL. The tcpm code does not currently take this into account. This results in crashes. Unable to handle kernel NULL pointer dereference at virtual address 000001f0 pgd = 41dad9a1 [000001f0] *pgd=00000000 Internal error: Oops: 5 [#1] THUMB2 Modules linked in: tcpci tcpm CPU: 0 PID: 2338 Comm: kworker/u2:0 Not tainted 5.1.18-sama5-armv7-r2 #6 Hardware name: Atmel SAMA5 Workqueue: 2-0050 tcpm_pd_rx_handler [tcpm] PC is at typec_altmode_attention+0x0/0x14 LR is at tcpm_pd_rx_handler+0xa3b/0xda0 [tcpm] ... [] (typec_altmode_attention) from [] (tcpm_pd_rx_handler+0xa3b/0xda0 [tcpm]) [] (tcpm_pd_rx_handler [tcpm]) from [] (process_one_work+0x123/0x2a8) [] (process_one_work) from [] (worker_thread+0xbd/0x3b0) [] (worker_thread) from [] (kthread+0xcf/0xf4) [] (kthread) from [] (ret_from_fork+0x11/0x38) Ignore PD messages if the associated alternate mode is not supported. Fixes: e9576fe8e605c ("usb: typec: tcpm: Support for Alternate Modes") Cc: stable Reported-by: Douglas Gilbert Cc: Douglas Gilbert Acked-by: Heikki Krogerus Tested-by: Douglas Gilbert Signed-off-by: Guenter Roeck Link: https://lore.kernel.org/r/1564761822-13984-1-git-send-email-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 38 ++++++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 14 deletions(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index ab6456622120..15abe1d9958f 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -1109,7 +1109,8 @@ static int tcpm_pd_svdm(struct tcpm_port *port, const __le32 *payload, int cnt, break; case CMD_ATTENTION: /* Attention command does not have response */ - typec_altmode_attention(adev, p[1]); + if (adev) + typec_altmode_attention(adev, p[1]); return 0; default: break; @@ -1161,20 +1162,26 @@ static int tcpm_pd_svdm(struct tcpm_port *port, const __le32 *payload, int cnt, } break; case CMD_ENTER_MODE: - typec_altmode_update_active(pdev, true); - - if (typec_altmode_vdm(adev, p[0], &p[1], cnt)) { - response[0] = VDO(adev->svid, 1, CMD_EXIT_MODE); - response[0] |= VDO_OPOS(adev->mode); - return 1; + if (adev && pdev) { + typec_altmode_update_active(pdev, true); + + if (typec_altmode_vdm(adev, p[0], &p[1], cnt)) { + response[0] = VDO(adev->svid, 1, + CMD_EXIT_MODE); + response[0] |= VDO_OPOS(adev->mode); + return 1; + } } return 0; case CMD_EXIT_MODE: - typec_altmode_update_active(pdev, false); + if (adev && pdev) { + typec_altmode_update_active(pdev, false); - /* Back to USB Operation */ - WARN_ON(typec_altmode_notify(adev, TYPEC_STATE_USB, - NULL)); + /* Back to USB Operation */ + WARN_ON(typec_altmode_notify(adev, + TYPEC_STATE_USB, + NULL)); + } break; default: break; @@ -1184,8 +1191,10 @@ static int tcpm_pd_svdm(struct tcpm_port *port, const __le32 *payload, int cnt, switch (cmd) { case CMD_ENTER_MODE: /* Back to USB Operation */ - WARN_ON(typec_altmode_notify(adev, TYPEC_STATE_USB, - NULL)); + if (adev) + WARN_ON(typec_altmode_notify(adev, + TYPEC_STATE_USB, + NULL)); break; default: break; @@ -1196,7 +1205,8 @@ static int tcpm_pd_svdm(struct tcpm_port *port, const __le32 *payload, int cnt, } /* Informing the alternate mode drivers about everything */ - typec_altmode_vdm(adev, p[0], &p[1], cnt); + if (adev) + typec_altmode_vdm(adev, p[0], &p[1], cnt); return rlen; } -- cgit From 88639051017fb61a414b636dd0fc490da2b62b64 Mon Sep 17 00:00:00 2001 From: Vijendar Mukunda Date: Fri, 2 Aug 2019 19:21:23 +0530 Subject: ASoC: amd: acp3x: use dma_ops of parent device for acp3x dma driver AMD platform device acp3x_rv_i2s created by parent PCI device driver. Pass struct device of the parent to snd_pcm_lib_preallocate_pages() so dma_alloc_coherent() can use correct dma_ops. Otherwise, it will use default dma_ops which is nommu_dma_ops on x86_64 even when IOMMU is enabled and set to non passthrough mode. Signed-off-by: Vijendar Mukunda Link: https://lore.kernel.org/r/1564753899-17124-1-git-send-email-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown --- sound/soc/amd/raven/acp3x-pcm-dma.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/amd/raven/acp3x-pcm-dma.c b/sound/soc/amd/raven/acp3x-pcm-dma.c index a4ade6bb5beb..905ed2f1861b 100644 --- a/sound/soc/amd/raven/acp3x-pcm-dma.c +++ b/sound/soc/amd/raven/acp3x-pcm-dma.c @@ -385,9 +385,11 @@ static snd_pcm_uframes_t acp3x_dma_pointer(struct snd_pcm_substream *substream) static int acp3x_dma_new(struct snd_soc_pcm_runtime *rtd) { + struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, + DRV_NAME); + struct device *parent = component->dev->parent; snd_pcm_lib_preallocate_pages_for_all(rtd->pcm, SNDRV_DMA_TYPE_DEV, - rtd->pcm->card->dev, - MIN_BUFFER, MAX_BUFFER); + parent, MIN_BUFFER, MAX_BUFFER); return 0; } -- cgit From 30c21734d853dae99d05a5295a59b7e26ccd5135 Mon Sep 17 00:00:00 2001 From: Vijendar Mukunda Date: Fri, 2 Aug 2019 19:21:24 +0530 Subject: ASoC: amd: acp3x: use dma address for acp3x dma driver We shouldn't assume CPU physical address we get from page_to_phys() is same as DMA address we get from dma_alloc_coherent(). On x86_64, we won't run into any problem with the assumption when dma_ops is nommu_dma_ops. However, DMA address is IOVA when IOMMU is enabled. And it's most likely different from CPU physical address when AMD IOMMU is not in passthrough mode. This patch fixes page faults when IOMMU is enabled. Signed-off-by: Vijendar Mukunda Link: https://lore.kernel.org/r/1564753899-17124-2-git-send-email-Vijendar.Mukunda@amd.com Signed-off-by: Mark Brown --- sound/soc/amd/raven/acp3x-pcm-dma.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/sound/soc/amd/raven/acp3x-pcm-dma.c b/sound/soc/amd/raven/acp3x-pcm-dma.c index 905ed2f1861b..bc4dfafdfcd1 100644 --- a/sound/soc/amd/raven/acp3x-pcm-dma.c +++ b/sound/soc/amd/raven/acp3x-pcm-dma.c @@ -31,8 +31,8 @@ struct i2s_stream_instance { u16 num_pages; u16 channels; u32 xfer_resolution; - struct page *pg; u64 bytescount; + dma_addr_t dma_addr; void __iomem *acp3x_base; }; @@ -211,9 +211,8 @@ static irqreturn_t i2s_irq_handler(int irq, void *dev_id) static void config_acp3x_dma(struct i2s_stream_instance *rtd, int direction) { u16 page_idx; - u64 addr; u32 low, high, val, acp_fifo_addr; - struct page *pg = rtd->pg; + dma_addr_t addr = rtd->dma_addr; /* 8 scratch registers used to map one 64 bit address */ if (direction == SNDRV_PCM_STREAM_PLAYBACK) @@ -229,7 +228,6 @@ static void config_acp3x_dma(struct i2s_stream_instance *rtd, int direction) for (page_idx = 0; page_idx < rtd->num_pages; page_idx++) { /* Load the low address of page int ACP SRAM through SRBM */ - addr = page_to_phys(pg); low = lower_32_bits(addr); high = upper_32_bits(addr); @@ -239,7 +237,7 @@ static void config_acp3x_dma(struct i2s_stream_instance *rtd, int direction) + 4); /* Move to next physically contiguos page */ val += 8; - pg++; + addr += PAGE_SIZE; } if (direction == SNDRV_PCM_STREAM_PLAYBACK) { @@ -341,7 +339,6 @@ static int acp3x_dma_hw_params(struct snd_pcm_substream *substream, { int status; u64 size; - struct page *pg; struct snd_pcm_runtime *runtime = substream->runtime; struct i2s_stream_instance *rtd = runtime->private_data; @@ -354,9 +351,8 @@ static int acp3x_dma_hw_params(struct snd_pcm_substream *substream, return status; memset(substream->runtime->dma_area, 0, params_buffer_bytes(params)); - pg = virt_to_page(substream->dma_buffer.area); - if (pg) { - rtd->pg = pg; + if (substream->dma_buffer.area) { + rtd->dma_addr = substream->dma_buffer.addr; rtd->num_pages = (PAGE_ALIGN(size) >> PAGE_SHIFT); config_acp3x_dma(rtd, substream->stream); status = 0; -- cgit From 8493b2a06fc5b77ef5c579dc32b12761f7b7a84c Mon Sep 17 00:00:00 2001 From: Marco Felsch Date: Tue, 30 Jul 2019 15:44:07 +0200 Subject: mtd: rawnand: micron: handle on-die "ECC-off" devices correctly Some devices are not supposed to support on-die ECC but experience shows that internal ECC machinery can actually be enabled through the "SET FEATURE (EFh)" command, even if a read of the "READ ID Parameter Tables" returns that it is not. Currently, the driver checks the "READ ID Parameter" field directly after having enabled the feature. If the check fails it returns immediately but leaves the ECC on. When using buggy chips like MT29F2G08ABAGA and MT29F2G08ABBGA, all future read/program cycles will go through the on-die ECC, confusing the host controller which is supposed to be the one handling correction. To address this in a common way we need to turn off the on-die ECC directly after reading the "READ ID Parameter" and before checking the "ECC status". Cc: stable@vger.kernel.org Fixes: dbc44edbf833 ("mtd: rawnand: micron: Fix on-die ECC detection logic") Signed-off-by: Marco Felsch Reviewed-by: Boris Brezillon Signed-off-by: Miquel Raynal --- drivers/mtd/nand/raw/nand_micron.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c index 1622d3145587..8ca9fad6e6ad 100644 --- a/drivers/mtd/nand/raw/nand_micron.c +++ b/drivers/mtd/nand/raw/nand_micron.c @@ -390,6 +390,14 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip) (chip->id.data[4] & MICRON_ID_INTERNAL_ECC_MASK) != 0x2) return MICRON_ON_DIE_UNSUPPORTED; + /* + * It seems that there are devices which do not support ECC officially. + * At least the MT29F2G08ABAGA / MT29F2G08ABBGA devices supports + * enabling the ECC feature but don't reflect that to the READ_ID table. + * So we have to guarantee that we disable the ECC feature directly + * after we did the READ_ID table command. Later we can evaluate the + * ECC_ENABLE support. + */ ret = micron_nand_on_die_ecc_setup(chip, true); if (ret) return MICRON_ON_DIE_UNSUPPORTED; @@ -398,13 +406,13 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip) if (ret) return MICRON_ON_DIE_UNSUPPORTED; - if (!(id[4] & MICRON_ID_ECC_ENABLED)) - return MICRON_ON_DIE_UNSUPPORTED; - ret = micron_nand_on_die_ecc_setup(chip, false); if (ret) return MICRON_ON_DIE_UNSUPPORTED; + if (!(id[4] & MICRON_ID_ECC_ENABLED)) + return MICRON_ON_DIE_UNSUPPORTED; + ret = nand_readid_op(chip, 0, id, sizeof(id)); if (ret) return MICRON_ON_DIE_UNSUPPORTED; -- cgit From 2d75989d2d92b71f3f34f2704ac109897a87319f Mon Sep 17 00:00:00 2001 From: Vignesh Raghavendra Date: Fri, 19 Jul 2019 13:59:12 +0530 Subject: mtd: hyperbus: Kconfig: Fix HBMC_AM654 dependencies On x86_64, when CONFIG_OF is not disabled: WARNING: unmet direct dependencies detected for MUX_MMIO Depends on [n]: MULTIPLEXER [=y] && (OF [=n] || COMPILE_TEST [=n]) Selected by [y]: - HBMC_AM654 [=y] && MTD [=y] && MTD_HYPERBUS [=y] due to config HBMC_AM654 tristate "HyperBus controller driver for AM65x SoC" select MULTIPLEXER select MUX_MMIO Fix this by making HBMC_AM654 imply MUX_MMIO instead of select so that dependencies are taken care of. MUX_MMIO is optional for functioning of driver. Fixes: b07079f1642c ("mtd: hyperbus: Add driver for TI's HyperBus memory controller") Reported-by: Randy Dunlap Signed-off-by: Vignesh Raghavendra Acked-by: Randy Dunlap # build-tested Signed-off-by: Miquel Raynal --- drivers/mtd/hyperbus/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/hyperbus/Kconfig b/drivers/mtd/hyperbus/Kconfig index cff6bbd226f5..1c691df8eff7 100644 --- a/drivers/mtd/hyperbus/Kconfig +++ b/drivers/mtd/hyperbus/Kconfig @@ -15,7 +15,7 @@ if MTD_HYPERBUS config HBMC_AM654 tristate "HyperBus controller driver for AM65x SoC" select MULTIPLEXER - select MUX_MMIO + imply MUX_MMIO help This is the driver for HyperBus controller on TI's AM65x and other SoCs -- cgit From 2b372a9685a757a1d3ab30615ef42b2db7c45298 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 31 Jul 2019 10:07:06 +0200 Subject: mtd: hyperbus: Add hardware dependency to AM654 driver The hbmc-am654 driver is for the TI AM654, which is an ARM64 SoC, so don't propose this driver on other architectures unless build-testing. Fixes: b07079f1642c ("mtd: hyperbus: Add driver for TI's HyperBus memory controller") Signed-off-by: Jean Delvare Cc: Vignesh Raghavendra Cc: Miquel Raynal Signed-off-by: Miquel Raynal --- drivers/mtd/hyperbus/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/hyperbus/Kconfig b/drivers/mtd/hyperbus/Kconfig index 1c691df8eff7..b4e3caf7d799 100644 --- a/drivers/mtd/hyperbus/Kconfig +++ b/drivers/mtd/hyperbus/Kconfig @@ -14,6 +14,7 @@ if MTD_HYPERBUS config HBMC_AM654 tristate "HyperBus controller driver for AM65x SoC" + depends on ARM64 || COMPILE_TEST select MULTIPLEXER imply MUX_MMIO help -- cgit From 685703b497bacea8765bb409d6b73455b73c540e Mon Sep 17 00:00:00 2001 From: Dexuan Cui Date: Wed, 31 Jul 2019 01:25:45 +0000 Subject: hv_sock: Fix hang when a connection is closed There is a race condition for an established connection that is being closed by the guest: the refcnt is 4 at the end of hvs_release() (Note: here the 'remove_sock' is false): 1 for the initial value; 1 for the sk being in the bound list; 1 for the sk being in the connected list; 1 for the delayed close_work. After hvs_release() finishes, __vsock_release() -> sock_put(sk) *may* decrease the refcnt to 3. Concurrently, hvs_close_connection() runs in another thread: calls vsock_remove_sock() to decrease the refcnt by 2; call sock_put() to decrease the refcnt to 0, and free the sk; next, the "release_sock(sk)" may hang due to use-after-free. In the above, after hvs_release() finishes, if hvs_close_connection() runs faster than "__vsock_release() -> sock_put(sk)", then there is not any issue, because at the beginning of hvs_close_connection(), the refcnt is still 4. The issue can be resolved if an extra reference is taken when the connection is established. Fixes: a9eeb998c28d ("hv_sock: Add support for delayed close") Signed-off-by: Dexuan Cui Reviewed-by: Sunil Muthuswamy Signed-off-by: David S. Miller --- net/vmw_vsock/hyperv_transport.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/vmw_vsock/hyperv_transport.c b/net/vmw_vsock/hyperv_transport.c index f2084e3f7aa4..9d864ebeb7b3 100644 --- a/net/vmw_vsock/hyperv_transport.c +++ b/net/vmw_vsock/hyperv_transport.c @@ -312,6 +312,11 @@ static void hvs_close_connection(struct vmbus_channel *chan) lock_sock(sk); hvs_do_close_lock_held(vsock_sk(sk), true); release_sock(sk); + + /* Release the refcnt for the channel that's opened in + * hvs_open_connection(). + */ + sock_put(sk); } static void hvs_open_connection(struct vmbus_channel *chan) @@ -407,6 +412,9 @@ static void hvs_open_connection(struct vmbus_channel *chan) } set_per_channel_state(chan, conn_from_host ? new : sk); + + /* This reference will be dropped by hvs_close_connection(). */ + sock_hold(conn_from_host ? new : sk); vmbus_set_chn_rescind_callback(chan, hvs_close_connection); /* Set the pending send size to max packet size to always get -- cgit From ea443e5e98b5b74e317ef3d26bcaea54931ccdee Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 30 Jul 2019 22:21:41 -0500 Subject: atm: iphase: Fix Spectre v1 vulnerability board is controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/atm/iphase.c:2765 ia_ioctl() warn: potential spectre issue 'ia_dev' [r] (local cap) drivers/atm/iphase.c:2774 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2782 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2816 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2823 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2830 ia_ioctl() warn: potential spectre issue '_ia_dev' [r] (local cap) drivers/atm/iphase.c:2845 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2856 ia_ioctl() warn: possible spectre second half. 'iadev' Fix this by sanitizing board before using it to index ia_dev and _ia_dev Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/ Signed-off-by: Gustavo A. R. Silva Signed-off-by: David S. Miller --- drivers/atm/iphase.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 302cf0ba1600..8c7a996d1f16 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -63,6 +63,7 @@ #include #include #include +#include #include "iphase.h" #include "suni.h" #define swap_byte_order(x) (((x & 0xff) << 8) | ((x & 0xff00) >> 8)) @@ -2760,8 +2761,11 @@ static int ia_ioctl(struct atm_dev *dev, unsigned int cmd, void __user *arg) } if (copy_from_user(&ia_cmds, arg, sizeof ia_cmds)) return -EFAULT; board = ia_cmds.status; - if ((board < 0) || (board > iadev_count)) - board = 0; + + if ((board < 0) || (board > iadev_count)) + board = 0; + board = array_index_nospec(board, iadev_count + 1); + iadev = ia_dev[board]; switch (ia_cmds.cmd) { case MEMDUMP: -- cgit From 3690c8c9a8edff0db077a38783112d8fe12a7dd2 Mon Sep 17 00:00:00 2001 From: Wang Xiayang Date: Wed, 31 Jul 2019 16:15:42 +0800 Subject: net/ethernet/qlogic/qed: force the string buffer NULL-terminated strncpy() does not ensure NULL-termination when the input string size equals to the destination buffer size 30. The output string is passed to qed_int_deassertion_aeu_bit() which calls DP_INFO() and relies NULL-termination. Use strlcpy instead. The other conditional branch above strncpy() needs no fix as snprintf() ensures NULL-termination. This issue is identified by a Coccinelle script. Signed-off-by: Wang Xiayang Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_int.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c index 4e8118a08654..9f5113639eaf 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_int.c +++ b/drivers/net/ethernet/qlogic/qed/qed_int.c @@ -1093,7 +1093,7 @@ static int qed_int_deassertion(struct qed_hwfn *p_hwfn, snprintf(bit_name, 30, p_aeu->bit_name, num); else - strncpy(bit_name, + strlcpy(bit_name, p_aeu->bit_name, 30); /* We now need to pass bitmask in its -- cgit From 2802d2cf24b1ca7ea4c54dde266ded6a16020eb5 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Thu, 1 Aug 2019 09:24:19 +0800 Subject: enetc: Select PHYLIB while CONFIG_FSL_ENETC_VF is set Like FSL_ENETC, when CONFIG_FSL_ENETC_VF is set, we should select PHYLIB, otherwise building still fails: drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_open': enetc.c:(.text+0x2744): undefined reference to `phy_start' enetc.c:(.text+0x282c): undefined reference to `phy_disconnect' drivers/net/ethernet/freescale/enetc/enetc.o: In function `enetc_close': enetc.c:(.text+0x28f8): undefined reference to `phy_stop' enetc.c:(.text+0x2904): undefined reference to `phy_disconnect' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x3f8): undefined reference to `phy_ethtool_get_link_ksettings' drivers/net/ethernet/freescale/enetc/enetc_ethtool.o:(.rodata+0x400): undefined reference to `phy_ethtool_set_link_ksettings' Reported-by: Hulk Robot Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: YueHaibing Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/enetc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/freescale/enetc/Kconfig b/drivers/net/ethernet/freescale/enetc/Kconfig index 46fdf36bfece..04a59db03f2b 100644 --- a/drivers/net/ethernet/freescale/enetc/Kconfig +++ b/drivers/net/ethernet/freescale/enetc/Kconfig @@ -13,6 +13,7 @@ config FSL_ENETC config FSL_ENETC_VF tristate "ENETC VF driver" depends on PCI && PCI_MSI && (ARCH_LAYERSCAPE || COMPILE_TEST) + select PHYLIB help This driver supports NXP ENETC gigabit ethernet controller PCIe virtual function (VF) devices enabled by the ENETC PF driver. -- cgit From aa6b1956158f1afc52761137620d4b3f8a058d24 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 31 Jul 2019 23:05:10 +0200 Subject: net: phy: fix race in genphy_update_link In phy_start_aneg() autoneg is started, and immediately after that link and autoneg status are read. As reported in [0] it can happen that at time of this read the PHY has reset the "aneg complete" bit but not yet the "link up" bit, what can result in a false link-up detection. To fix this don't report link as up if we're in aneg mode and PHY doesn't signal "aneg complete". [0] https://marc.info/?t=156413509900003&r=1&w=2 Fixes: 4950c2ba49cc ("net: phy: fix autoneg mismatch case in genphy_read_status") Reported-by: liuyonglong Tested-by: liuyonglong Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 6b5cb87f3866..7ddd91df99e3 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1774,6 +1774,12 @@ done: phydev->link = status & BMSR_LSTATUS ? 1 : 0; phydev->autoneg_complete = status & BMSR_ANEGCOMPLETE ? 1 : 0; + /* Consider the case that autoneg was started and "aneg complete" + * bit has been reset, but "link up" bit not yet. + */ + if (phydev->autoneg == AUTONEG_ENABLE && !phydev->autoneg_complete) + phydev->link = 0; + return 0; } EXPORT_SYMBOL(genphy_update_link); -- cgit From 59c0b47a1e11b5e81ab1dfd13579c9fbdb02f0b4 Mon Sep 17 00:00:00 2001 From: Kevin Lo Date: Thu, 1 Aug 2019 11:29:38 +0800 Subject: r8152: fix typo in register name It is likely that PAL_BDC_CR should be PLA_BDC_CR. Signed-off-by: Kevin Lo Acked-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 39e0768d734d..0cc03a9ff545 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -50,7 +50,7 @@ #define PLA_TEREDO_WAKE_BASE 0xc0c4 #define PLA_MAR 0xcd00 #define PLA_BACKUP 0xd000 -#define PAL_BDC_CR 0xd1a0 +#define PLA_BDC_CR 0xd1a0 #define PLA_TEREDO_TIMER 0xd2cc #define PLA_REALWOW_TIMER 0xd2e8 #define PLA_SUSPEND_FLAG 0xd38a @@ -274,7 +274,7 @@ #define TEREDO_RS_EVENT_MASK 0x00fe #define OOB_TEREDO_EN 0x0001 -/* PAL_BDC_CR */ +/* PLA_BDC_CR */ #define ALDPS_PROXY_MODE 0x0001 /* PLA_EFUSE_CMD */ @@ -3191,9 +3191,9 @@ static void r8152b_enter_oob(struct r8152 *tp) rtl_rx_vlan_en(tp, true); - ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR); + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BDC_CR); ocp_data |= ALDPS_PROXY_MODE; - ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_BDC_CR, ocp_data); ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB; @@ -3577,9 +3577,9 @@ static void r8153_enter_oob(struct r8152 *tp) rtl_rx_vlan_en(tp, true); - ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PAL_BDC_CR); + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BDC_CR); ocp_data |= ALDPS_PROXY_MODE; - ocp_write_word(tp, MCU_TYPE_PLA, PAL_BDC_CR, ocp_data); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_BDC_CR, ocp_data); ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL); ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB; -- cgit From 4853fc32306faaef03d409c38921c401379da2ea Mon Sep 17 00:00:00 2001 From: Matt Coffin Date: Wed, 31 Jul 2019 14:14:35 -0600 Subject: drm/amd/powerplay: Allow changing of fan_control in smu_v11_0 [Why] Before this change, the fan control state on smu_v11 was not able to be changed because the capability check for checking if the fan control capability existed was inverted. [How] The capability check for fan control in smu_v11_0_auto_fan_control was inverted, to correctly check for the absence, instead of presence of fan control capabilities. Reviewed-by: Evan Quan Signed-off-by: Matt Coffin Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/smu_v11_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c index ac5b26228e75..5fde5cf65b42 100644 --- a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c +++ b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c @@ -1391,7 +1391,7 @@ smu_v11_0_smc_fan_control(struct smu_context *smu, bool start) { int ret = 0; - if (smu_feature_is_supported(smu, SMU_FEATURE_FAN_CONTROL_BIT)) + if (!smu_feature_is_supported(smu, SMU_FEATURE_FAN_CONTROL_BIT)) return 0; ret = smu_feature_set_enabled(smu, SMU_FEATURE_FAN_CONTROL_BIT, start); -- cgit From 8ecd998debe1280ef8aab45049e69ac3d2116398 Mon Sep 17 00:00:00 2001 From: Kevin Wang Date: Fri, 2 Aug 2019 12:01:00 +0800 Subject: drm/amd/powerplay: honor hw limit on fetching metrics data for navi10 too frequently to update mertrics table will cause smu internal error. Signed-off-by: Kevin Wang Reviewed-by: Evan Quan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/navi10_ppt.c | 56 ++++++++++++++++++++---------- 1 file changed, 38 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c index cc0a3b2256af..f63405b1a009 100644 --- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c +++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c @@ -502,6 +502,8 @@ static int navi10_store_powerplay_table(struct smu_context *smu) static int navi10_tables_init(struct smu_context *smu, struct smu_table *tables) { + struct smu_table_context *smu_table = &smu->smu_table; + SMU_TABLE_INIT(tables, SMU_TABLE_PPTABLE, sizeof(PPTable_t), PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); SMU_TABLE_INIT(tables, SMU_TABLE_WATERMARKS, sizeof(Watermarks_t), @@ -516,9 +518,35 @@ static int navi10_tables_init(struct smu_context *smu, struct smu_table *tables) sizeof(DpmActivityMonitorCoeffInt_t), PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); + smu_table->metrics_table = kzalloc(sizeof(SmuMetrics_t), GFP_KERNEL); + if (!smu_table->metrics_table) + return -ENOMEM; + smu_table->metrics_time = 0; + return 0; } +static int navi10_get_metrics_table(struct smu_context *smu, + SmuMetrics_t *metrics_table) +{ + struct smu_table_context *smu_table= &smu->smu_table; + int ret = 0; + + if (!smu_table->metrics_time || time_after(jiffies, smu_table->metrics_time + HZ / 1000)) { + ret = smu_update_table(smu, SMU_TABLE_SMU_METRICS, 0, + (void *)smu_table->metrics_table, false); + if (ret) { + pr_info("Failed to export SMU metrics table!\n"); + return ret; + } + smu_table->metrics_time = jiffies; + } + + memcpy(metrics_table, smu_table->metrics_table, sizeof(SmuMetrics_t)); + + return ret; +} + static int navi10_allocate_dpm_context(struct smu_context *smu) { struct smu_dpm_context *smu_dpm = &smu->smu_dpm; @@ -598,15 +626,10 @@ static int navi10_get_current_clk_freq_by_table(struct smu_context *smu, enum smu_clk_type clk_type, uint32_t *value) { - static SmuMetrics_t metrics; int ret = 0, clk_id = 0; + SmuMetrics_t metrics; - if (!value) - return -EINVAL; - - memset(&metrics, 0, sizeof(metrics)); - - ret = smu_update_table(smu, SMU_TABLE_SMU_METRICS, 0, (void *)&metrics, false); + ret = navi10_get_metrics_table(smu, &metrics); if (ret) return ret; @@ -894,8 +917,9 @@ static int navi10_get_gpu_power(struct smu_context *smu, uint32_t *value) if (!value) return -EINVAL; - ret = smu_update_table(smu, SMU_TABLE_SMU_METRICS, 0, (void *)&metrics, - false); + ret = navi10_get_metrics_table(smu, &metrics); + if (ret) + return ret; if (ret) return ret; @@ -914,10 +938,7 @@ static int navi10_get_current_activity_percent(struct smu_context *smu, if (!value) return -EINVAL; - msleep(1); - - ret = smu_update_table(smu, SMU_TABLE_SMU_METRICS, 0, - (void *)&metrics, false); + ret = navi10_get_metrics_table(smu, &metrics); if (ret) return ret; @@ -956,10 +977,9 @@ static int navi10_get_fan_speed_rpm(struct smu_context *smu, if (!speed) return -EINVAL; - memset(&metrics, 0, sizeof(metrics)); - - ret = smu_update_table(smu, SMU_TABLE_SMU_METRICS, 0, - (void *)&metrics, false); + ret = navi10_get_metrics_table(smu, &metrics); + if (ret) + return ret; if (ret) return ret; @@ -1307,7 +1327,7 @@ static int navi10_thermal_get_temperature(struct smu_context *smu, if (!value) return -EINVAL; - ret = smu_update_table(smu, SMU_TABLE_SMU_METRICS, 0, (void *)&metrics, false); + ret = navi10_get_metrics_table(smu, &metrics); if (ret) return ret; -- cgit From b887011803582c8539cd9f963035eef91373a169 Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Fri, 2 Aug 2019 16:38:32 +0800 Subject: drm/amd/powerplay: correct navi10 vcn powergate vcn dpm on is a prerequisite for vcn power gate control. Signed-off-by: Evan Quan Reviewed-by: Kenneth Feng Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 4 +++- drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h | 1 + drivers/gpu/drm/amd/powerplay/navi10_ppt.c | 23 +++++++++++++++-------- 3 files changed, 19 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c index 0685a3388e38..8a3eadeebdcb 100644 --- a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c @@ -315,6 +315,8 @@ int smu_get_power_num_states(struct smu_context *smu, int smu_common_read_sensor(struct smu_context *smu, enum amd_pp_sensors sensor, void *data, uint32_t *size) { + struct smu_power_context *smu_power = &smu->smu_power; + struct smu_power_gate *power_gate = &smu_power->power_gate; int ret = 0; switch (sensor) { @@ -339,7 +341,7 @@ int smu_common_read_sensor(struct smu_context *smu, enum amd_pp_sensors sensor, *size = 4; break; case AMDGPU_PP_SENSOR_VCN_POWER_STATE: - *(uint32_t *)data = smu_feature_is_enabled(smu, SMU_FEATURE_VCN_PG_BIT) ? 1 : 0; + *(uint32_t *)data = power_gate->vcn_gated ? 0 : 1; *size = 4; break; default: diff --git a/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h b/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h index 208e6711d506..a0f52c86d8c7 100644 --- a/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h +++ b/drivers/gpu/drm/amd/powerplay/inc/amdgpu_smu.h @@ -451,6 +451,7 @@ struct smu_dpm_context { struct smu_power_gate { bool uvd_gated; bool vce_gated; + bool vcn_gated; }; struct smu_power_context { diff --git a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c index f63405b1a009..b81c7e715dc9 100644 --- a/drivers/gpu/drm/amd/powerplay/navi10_ppt.c +++ b/drivers/gpu/drm/amd/powerplay/navi10_ppt.c @@ -605,20 +605,27 @@ static int navi10_set_default_dpm_table(struct smu_context *smu) static int navi10_dpm_set_uvd_enable(struct smu_context *smu, bool enable) { + struct smu_power_context *smu_power = &smu->smu_power; + struct smu_power_gate *power_gate = &smu_power->power_gate; int ret = 0; if (enable) { - ret = smu_send_smc_msg_with_param(smu, SMU_MSG_PowerUpVcn, 1); - if (ret) - return ret; + /* vcn dpm on is a prerequisite for vcn power gate messages */ + if (smu_feature_is_enabled(smu, SMU_FEATURE_VCN_PG_BIT)) { + ret = smu_send_smc_msg_with_param(smu, SMU_MSG_PowerUpVcn, 1); + if (ret) + return ret; + } + power_gate->vcn_gated = false; } else { - ret = smu_send_smc_msg(smu, SMU_MSG_PowerDownVcn); - if (ret) - return ret; + if (smu_feature_is_enabled(smu, SMU_FEATURE_VCN_PG_BIT)) { + ret = smu_send_smc_msg(smu, SMU_MSG_PowerDownVcn); + if (ret) + return ret; + } + power_gate->vcn_gated = true; } - ret = smu_feature_set_enabled(smu, SMU_FEATURE_VCN_PG_BIT, enable); - return ret; } -- cgit From 9b562437d388582f5463a4c3f60ee97a2d4d8d58 Mon Sep 17 00:00:00 2001 From: Chuhong Yuan Date: Wed, 31 Jul 2019 10:01:40 +0800 Subject: drm/modes: Fix unterminated strncpy strncpy(dest, src, strlen(src)) leads to unterminated dest, which is dangerous. Fix it by using strscpy. Fixes: 3aeeb13d8996 ("drm/modes: Support modes names on the command line") Signed-off-by: Chuhong Yuan Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20190731020140.3529-1-hslester96@gmail.com --- drivers/gpu/drm/drm_modes.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 80fcd5dc1558..b0369e690f36 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -1770,7 +1770,9 @@ bool drm_mode_parse_command_line_for_connector(const char *mode_option, } if (named_mode) { - strncpy(mode->name, name, mode_end); + if (mode_end + 1 > DRM_DISPLAY_MODE_LEN) + return false; + strscpy(mode->name, name, mode_end + 1); } else { ret = drm_mode_parse_cmdline_res_mode(name, mode_end, parse_extras, -- cgit From 68d8681e97bd1c90259f341c1695af05002070ef Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 2 Aug 2019 21:48:33 -0700 Subject: kernel/signal.c: fix a kernel-doc markup The kernel-doc parser doesn't handle expressions with %foo*. Instead, when an asterisk should be part of a constant, it uses an alternative notation: `foo*`. Link: http://lkml.kernel.org/r/7f18c2e0b5e39e6b7eb55ddeb043b8b260b49f2d.1563361575.git.mchehab+samsung@kernel.org Signed-off-by: Mauro Carvalho Chehab Cc: Deepa Dinamani Cc: Jonathan Corbet Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/signal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/signal.c b/kernel/signal.c index 349f5a67f100..e667be6907d7 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -349,7 +349,7 @@ void task_clear_jobctl_pending(struct task_struct *task, unsigned long mask) * @task has %JOBCTL_STOP_PENDING set and is participating in a group stop. * Group stop states are cleared and the group stop count is consumed if * %JOBCTL_STOP_CONSUME was set. If the consumption completes the group - * stop, the appropriate %SIGNAL_* flags are set. + * stop, the appropriate `SIGNAL_*` flags are set. * * CONTEXT: * Must be called with @task->sighand->siglock held. -- cgit From df9576def004d2cd5beedc00cb6e8901427634b9 Mon Sep 17 00:00:00 2001 From: Yang Shi Date: Fri, 2 Aug 2019 21:48:37 -0700 Subject: Revert "kmemleak: allow to coexist with fault injection" When running ltp's oom test with kmemleak enabled, the below warning was triggerred since kernel detects __GFP_NOFAIL & ~__GFP_DIRECT_RECLAIM is passed in: WARNING: CPU: 105 PID: 2138 at mm/page_alloc.c:4608 __alloc_pages_nodemask+0x1c31/0x1d50 Modules linked in: loop dax_pmem dax_pmem_core ip_tables x_tables xfs virtio_net net_failover virtio_blk failover ata_generic virtio_pci virtio_ring virtio libata CPU: 105 PID: 2138 Comm: oom01 Not tainted 5.2.0-next-20190710+ #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__alloc_pages_nodemask+0x1c31/0x1d50 ... kmemleak_alloc+0x4e/0xb0 kmem_cache_alloc+0x2a7/0x3e0 mempool_alloc_slab+0x2d/0x40 mempool_alloc+0x118/0x2b0 bio_alloc_bioset+0x19d/0x350 get_swap_bio+0x80/0x230 __swap_writepage+0x5ff/0xb20 The mempool_alloc_slab() clears __GFP_DIRECT_RECLAIM, however kmemleak has __GFP_NOFAIL set all the time due to d9570ee3bd1d4f2 ("kmemleak: allow to coexist with fault injection"). But, it doesn't make any sense to have __GFP_NOFAIL and ~__GFP_DIRECT_RECLAIM specified at the same time. According to the discussion on the mailing list, the commit should be reverted for short term solution. Catalin Marinas would follow up with a better solution for longer term. The failure rate of kmemleak metadata allocation may increase in some circumstances, but this should be expected side effect. Link: http://lkml.kernel.org/r/1563299431-111710-1-git-send-email-yang.shi@linux.alibaba.com Fixes: d9570ee3bd1d4f2 ("kmemleak: allow to coexist with fault injection") Signed-off-by: Yang Shi Suggested-by: Catalin Marinas Acked-by: Michal Hocko Cc: Dmitry Vyukov Cc: David Rientjes Cc: Matthew Wilcox Cc: Qian Cai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/kmemleak.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index dbbd518fb6b3..6e9e8cca663e 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -114,7 +114,7 @@ /* GFP bitmask for kmemleak internal allocations */ #define gfp_kmemleak_mask(gfp) (((gfp) & (GFP_KERNEL | GFP_ATOMIC)) | \ __GFP_NORETRY | __GFP_NOMEMALLOC | \ - __GFP_NOWARN | __GFP_NOFAIL) + __GFP_NOWARN) /* scanning area inside a memory block */ struct kmemleak_scan_area { -- cgit From 7bc36e3ce91471b6377c8eadc0a2f220a2280083 Mon Sep 17 00:00:00 2001 From: YueHaibing Date: Fri, 2 Aug 2019 21:48:40 -0700 Subject: ocfs2: remove set but not used variable 'last_hash' Fixes gcc '-Wunused-but-set-variable' warning: fs/ocfs2/xattr.c: In function ocfs2_xattr_bucket_find: fs/ocfs2/xattr.c:3828:6: warning: variable last_hash set but not used [-Wunused-but-set-variable] It's never used and can be removed. Link: http://lkml.kernel.org/r/20190716132110.34836-1-yuehaibing@huawei.com Signed-off-by: YueHaibing Acked-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/xattr.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 385f3aaa2448..90c830e3758e 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -3825,7 +3825,6 @@ static int ocfs2_xattr_bucket_find(struct inode *inode, u16 blk_per_bucket = ocfs2_blocks_per_xattr_bucket(inode->i_sb); int low_bucket = 0, bucket, high_bucket; struct ocfs2_xattr_bucket *search; - u32 last_hash; u64 blkno, lower_blkno = 0; search = ocfs2_xattr_bucket_new(inode); @@ -3869,8 +3868,6 @@ static int ocfs2_xattr_bucket_find(struct inode *inode, if (xh->xh_count) xe = &xh->xh_entries[le16_to_cpu(xh->xh_count) - 1]; - last_hash = le32_to_cpu(xe->xe_name_hash); - /* record lower_blkno which may be the insert place. */ lower_blkno = blkno; -- cgit From fa1e512fac717f34e7c12d7a384c46e90a647392 Mon Sep 17 00:00:00 2001 From: Yang Shi Date: Fri, 2 Aug 2019 21:48:44 -0700 Subject: mm: vmscan: check if mem cgroup is disabled or not before calling memcg slab shrinker Shakeel Butt reported premature oom on kernel with "cgroup_disable=memory" since mem_cgroup_is_root() returns false even though memcg is actually NULL. The drop_caches is also broken. It is because commit aeed1d325d42 ("mm/vmscan.c: generalize shrink_slab() calls in shrink_node()") removed the !memcg check before !mem_cgroup_is_root(). And, surprisingly root memcg is allocated even though memory cgroup is disabled by kernel boot parameter. Add mem_cgroup_disabled() check to make reclaimer work as expected. Link: http://lkml.kernel.org/r/1563385526-20805-1-git-send-email-yang.shi@linux.alibaba.com Fixes: aeed1d325d42 ("mm/vmscan.c: generalize shrink_slab() calls in shrink_node()") Signed-off-by: Yang Shi Reported-by: Shakeel Butt Reviewed-by: Shakeel Butt Reviewed-by: Kirill Tkhai Acked-by: Michal Hocko Cc: Jan Hadrava Cc: Vladimir Davydov Cc: Johannes Weiner Cc: Roman Gushchin Cc: Hugh Dickins Cc: Qian Cai Cc: Kirill A. Shutemov Cc: [4.19+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index 44df66a98f2a..dbdc46a84f63 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -699,7 +699,14 @@ static unsigned long shrink_slab(gfp_t gfp_mask, int nid, unsigned long ret, freed = 0; struct shrinker *shrinker; - if (!mem_cgroup_is_root(memcg)) + /* + * The root memcg might be allocated even though memcg is disabled + * via "cgroup_disable=memory" boot parameter. This could make + * mem_cgroup_is_root() return false, then just run memcg slab + * shrink, but skip global shrink. This may result in premature + * oom. + */ + if (!mem_cgroup_disabled() && !mem_cgroup_is_root(memcg)) return shrink_slab_memcg(gfp_mask, nid, memcg, priority); if (!down_read_trylock(&shrinker_rwsem)) -- cgit From ebdf4de5642fb6580b0763158b6b4b791c4d6a4d Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 2 Aug 2019 21:48:47 -0700 Subject: mm: migrate: fix reference check race between __find_get_block() and migration buffer_migrate_page_norefs() can race with bh users in the following way: CPU1 CPU2 buffer_migrate_page_norefs() buffer_migrate_lock_buffers() checks bh refs spin_unlock(&mapping->private_lock) __find_get_block() spin_lock(&mapping->private_lock) grab bh ref spin_unlock(&mapping->private_lock) move page do bh work This can result in various issues like lost updates to buffers (i.e. metadata corruption) or use after free issues for the old page. This patch closes the race by holding mapping->private_lock while the mapping is being moved to a new page. Ordinarily, a reference can be taken outside of the private_lock using the per-cpu BH LRU but the references are checked and the LRU invalidated if necessary. The private_lock is held once the references are known so the buffer lookup slow path will spin on the private_lock. Between the page lock and private_lock, it should be impossible for other references to be acquired and updates to happen during the migration. A user had reported data corruption issues on a distribution kernel with a similar page migration implementation as mainline. The data corruption could not be reproduced with this patch applied. A small number of migration-intensive tests were run and no performance problems were noted. [mgorman@techsingularity.net: Changelog, removed tracing] Link: http://lkml.kernel.org/r/20190718090238.GF24383@techsingularity.net Fixes: 89cb0888ca14 "mm: migrate: provide buffer_migrate_page_norefs()" Signed-off-by: Jan Kara Signed-off-by: Mel Gorman Cc: [5.0+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/migrate.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/mm/migrate.c b/mm/migrate.c index 8992741f10aa..515718392b24 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -767,12 +767,12 @@ recheck_buffers: } bh = bh->b_this_page; } while (bh != head); - spin_unlock(&mapping->private_lock); if (busy) { if (invalidated) { rc = -EAGAIN; goto unlock_buffers; } + spin_unlock(&mapping->private_lock); invalidate_bh_lrus(); invalidated = true; goto recheck_buffers; @@ -805,6 +805,8 @@ recheck_buffers: rc = MIGRATEPAGE_SUCCESS; unlock_buffers: + if (check_refs) + spin_unlock(&mapping->private_lock); bh = head; do { unlock_buffer(bh); -- cgit From 670105a25608affe01cb0ccdc2a1f4bd2327172b Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Fri, 2 Aug 2019 21:48:51 -0700 Subject: mm: compaction: avoid 100% CPU usage during compaction when a task is killed "howaboutsynergy" reported via kernel buzilla number 204165 that compact_zone_order was consuming 100% CPU during a stress test for prolonged periods of time. Specifically the following command, which should exit in 10 seconds, was taking an excessive time to finish while the CPU was pegged at 100%. stress -m 220 --vm-bytes 1000000000 --timeout 10 Tracing indicated a pattern as follows stress-3923 [007] 519.106208: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106212: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106216: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106219: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106223: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106227: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106231: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106235: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106238: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 stress-3923 [007] 519.106242: mm_compaction_isolate_migratepages: range=(0x70bb80 ~ 0x70bb80) nr_scanned=0 nr_taken=0 Note that compaction is entered in rapid succession while scanning and isolating nothing. The problem is that when a task that is compacting receives a fatal signal, it retries indefinitely instead of exiting while making no progress as a fatal signal is pending. It's not easy to trigger this condition although enabling zswap helps on the basis that the timing is altered. A very small window has to be hit for the problem to occur (signal delivered while compacting and isolating a PFN for migration that is not aligned to SWAP_CLUSTER_MAX). This was reproduced locally -- 16G single socket system, 8G swap, 30% zswap configured, vm-bytes 22000000000 using Colin Kings stress-ng implementation from github running in a loop until the problem hits). Tracing recorded the problem occurring almost 200K times in a short window. With this patch, the problem hit 4 times but the task existed normally instead of consuming CPU. This problem has existed for some time but it was made worse by commit cf66f0700c8f ("mm, compaction: do not consider a need to reschedule as contention"). Before that commit, if the same condition was hit then locks would be quickly contended and compaction would exit that way. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204165 Link: http://lkml.kernel.org/r/20190718085708.GE24383@techsingularity.net Fixes: cf66f0700c8f ("mm, compaction: do not consider a need to reschedule as contention") Signed-off-by: Mel Gorman Reviewed-by: Vlastimil Babka Cc: [5.1+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/compaction.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/mm/compaction.c b/mm/compaction.c index 9e1b9acb116b..952dc2fb24e5 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -842,13 +842,15 @@ isolate_migratepages_block(struct compact_control *cc, unsigned long low_pfn, /* * Periodically drop the lock (if held) regardless of its - * contention, to give chance to IRQs. Abort async compaction - * if contended. + * contention, to give chance to IRQs. Abort completely if + * a fatal signal is pending. */ if (!(low_pfn % SWAP_CLUSTER_MAX) && compact_unlock_should_abort(&pgdat->lru_lock, - flags, &locked, cc)) - break; + flags, &locked, cc)) { + low_pfn = 0; + goto fatal_pending; + } if (!pfn_valid_within(low_pfn)) goto isolate_fail; @@ -1060,6 +1062,7 @@ isolate_abort: trace_mm_compaction_isolate_migratepages(start_pfn, low_pfn, nr_scanned, nr_isolated); +fatal_pending: cc->total_migrate_scanned += nr_scanned; if (nr_isolated) count_compact_events(COMPACTISOLATED, nr_isolated); -- cgit From ebb6d35a74ce21ce1673b8f404c1039d5a1e7e2d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 2 Aug 2019 21:48:54 -0700 Subject: kasan: remove clang version check for KASAN_STACK asan-stack mode still uses dangerously large kernel stacks of tens of kilobytes in some drivers, and it does not seem that anyone is working on the clang bug. Turn it off for all clang versions to prevent users from accidentally enabling it once they update to clang-9, and to help automated build testing with clang-9. Link: https://bugs.llvm.org/show_bug.cgi?id=38809 Link: http://lkml.kernel.org/r/20190719200347.2596375-1-arnd@arndb.de Fixes: 6baec880d7a5 ("kasan: turn off asan-stack for clang-8 and earlier") Signed-off-by: Arnd Bergmann Acked-by: Nick Desaulniers Reviewed-by: Mark Brown Reviewed-by: Andrey Ryabinin Cc: Qian Cai Cc: Andrey Konovalov Cc: Vasily Gorbik Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/Kconfig.kasan | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/lib/Kconfig.kasan b/lib/Kconfig.kasan index 4fafba1a923b..7fa97a8b5717 100644 --- a/lib/Kconfig.kasan +++ b/lib/Kconfig.kasan @@ -106,7 +106,6 @@ endchoice config KASAN_STACK_ENABLE bool "Enable stack instrumentation (unsafe)" if CC_IS_CLANG && !COMPILE_TEST - default !(CLANG_VERSION < 90000) depends on KASAN help The LLVM stack address sanitizer has a know problem that @@ -115,11 +114,11 @@ config KASAN_STACK_ENABLE Disabling asan-stack makes it safe to run kernels build with clang-8 with KASAN enabled, though it loses some of the functionality. - This feature is always disabled when compile-testing with clang-8 - or earlier to avoid cluttering the output in stack overflow - warnings, but clang-8 users can still enable it for builds without - CONFIG_COMPILE_TEST. On gcc and later clang versions it is - assumed to always be safe to use and enabled by default. + This feature is always disabled when compile-testing with clang + to avoid cluttering the output in stack overflow warnings, + but clang users can still enable it for builds without + CONFIG_COMPILE_TEST. On gcc it is assumed to always be safe + to use and enabled by default. config KASAN_STACK int -- cgit From af700eaed0564d5d3963a7a51cb0843629d7fe3d Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 2 Aug 2019 21:48:58 -0700 Subject: ubsan: build ubsan.c more conservatively objtool points out several conditions that it does not like, depending on the combination with other configuration options and compiler variants: stack protector: lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0xbf: call to __stack_chk_fail() with UACCESS enabled lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0xbe: call to __stack_chk_fail() with UACCESS enabled stackleak plugin: lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0x4a: call to stackleak_track_stack() with UACCESS enabled lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0x4a: call to stackleak_track_stack() with UACCESS enabled kasan: lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch()+0x25: call to memcpy() with UACCESS enabled lib/ubsan.o: warning: objtool: __ubsan_handle_type_mismatch_v1()+0x25: call to memcpy() with UACCESS enabled The stackleak and kasan options just need to be disabled for this file as we do for other files already. For the stack protector, we already attempt to disable it, but this fails on clang because the check is mixed with the gcc specific -fno-conserve-stack option. According to Andrey Ryabinin, that option is not even needed, dropping it here fixes the stackprotector issue. Link: http://lkml.kernel.org/r/20190722125139.1335385-1-arnd@arndb.de Link: https://lore.kernel.org/lkml/20190617123109.667090-1-arnd@arndb.de/t/ Link: https://lore.kernel.org/lkml/20190722091050.2188664-1-arnd@arndb.de/t/ Fixes: d08965a27e84 ("x86/uaccess, ubsan: Fix UBSAN vs. SMAP") Signed-off-by: Arnd Bergmann Reviewed-by: Andrey Ryabinin Cc: Josh Poimboeuf Cc: Peter Zijlstra Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Dmitry Vyukov Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Kees Cook Cc: Matthew Wilcox Cc: Ard Biesheuvel Cc: Andy Shevchenko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/lib/Makefile b/lib/Makefile index 095601ce371d..29c02a924973 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -279,7 +279,8 @@ obj-$(CONFIG_UCS2_STRING) += ucs2_string.o obj-$(CONFIG_UBSAN) += ubsan.o UBSAN_SANITIZE_ubsan.o := n -CFLAGS_ubsan.o := $(call cc-option, -fno-conserve-stack -fno-stack-protector) +KASAN_SANITIZE_ubsan.o := n +CFLAGS_ubsan.o := $(call cc-option, -fno-stack-protector) $(DISABLE_STACKLEAK_PLUGIN) obj-$(CONFIG_SBITMAP) += sbitmap.o -- cgit From ee38d94a0ad89890b770f6c876263cf9fcbfde84 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 2 Aug 2019 21:49:02 -0700 Subject: page flags: prioritize kasan bits over last-cpuid ARM64 randdconfig builds regularly run into a build error, especially when NUMA_BALANCING and SPARSEMEM are enabled but not SPARSEMEM_VMEMMAP: #error "KASAN: not enough bits in page flags for tag" The last-cpuid bits are already contitional on the available space, so the result of the calculation is a bit random on whether they were already left out or not. Adding the kasan tag bits before last-cpuid makes it much more likely to end up with a successful build here, and should be reliable for randconfig at least, as long as that does not randomize NR_CPUS or NODES_SHIFT but uses the defaults. In order for the modified check to not trigger in the x86 vdso32 code where all constants are wrong (building with -m32), enclose all the definitions with an #ifdef. [arnd@arndb.de: build fix] Link: http://lkml.kernel.org/r/CAK8P3a3Mno1SWTcuAOT0Wa9VS15pdU6EfnkxLbDpyS55yO04+g@mail.gmail.com Link: http://lkml.kernel.org/r/20190722115520.3743282-1-arnd@arndb.de Link: https://lore.kernel.org/lkml/20190618095347.3850490-1-arnd@arndb.de/ Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc") Signed-off-by: Arnd Bergmann Signed-off-by: Arnd Bergmann Reviewed-by: Andrey Konovalov Reviewed-by: Andrey Ryabinin Cc: Andrey Konovalov Cc: Dmitry Vyukov Cc: Will Deacon Cc: Christoph Lameter Cc: Mark Rutland Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/mips/vdso/vdso.h | 1 + include/linux/page-flags-layout.h | 18 +++++++++++------- 2 files changed, 12 insertions(+), 7 deletions(-) diff --git a/arch/mips/vdso/vdso.h b/arch/mips/vdso/vdso.h index 14b1931be69c..b65b169778e3 100644 --- a/arch/mips/vdso/vdso.h +++ b/arch/mips/vdso/vdso.h @@ -9,6 +9,7 @@ #if _MIPS_SIM != _MIPS_SIM_ABI64 && defined(CONFIG_64BIT) /* Building 32-bit VDSO for the 64-bit kernel. Fake a 32-bit Kconfig. */ +#define BUILD_VDSO32_64 #undef CONFIG_64BIT #define CONFIG_32BIT 1 #ifndef __ASSEMBLY__ diff --git a/include/linux/page-flags-layout.h b/include/linux/page-flags-layout.h index 1dda31825ec4..71283739ffd2 100644 --- a/include/linux/page-flags-layout.h +++ b/include/linux/page-flags-layout.h @@ -32,6 +32,7 @@ #endif /* CONFIG_SPARSEMEM */ +#ifndef BUILD_VDSO32_64 /* * page->flags layout: * @@ -76,20 +77,22 @@ #define LAST_CPUPID_SHIFT 0 #endif -#if SECTIONS_WIDTH+ZONES_WIDTH+NODES_SHIFT+LAST_CPUPID_SHIFT <= BITS_PER_LONG - NR_PAGEFLAGS +#ifdef CONFIG_KASAN_SW_TAGS +#define KASAN_TAG_WIDTH 8 +#else +#define KASAN_TAG_WIDTH 0 +#endif + +#if SECTIONS_WIDTH+ZONES_WIDTH+NODES_SHIFT+LAST_CPUPID_SHIFT+KASAN_TAG_WIDTH \ + <= BITS_PER_LONG - NR_PAGEFLAGS #define LAST_CPUPID_WIDTH LAST_CPUPID_SHIFT #else #define LAST_CPUPID_WIDTH 0 #endif -#ifdef CONFIG_KASAN_SW_TAGS -#define KASAN_TAG_WIDTH 8 #if SECTIONS_WIDTH+NODES_WIDTH+ZONES_WIDTH+LAST_CPUPID_WIDTH+KASAN_TAG_WIDTH \ > BITS_PER_LONG - NR_PAGEFLAGS -#error "KASAN: not enough bits in page flags for tag" -#endif -#else -#define KASAN_TAG_WIDTH 0 +#error "Not enough bits in page flags" #endif /* @@ -104,4 +107,5 @@ #define LAST_CPUPID_NOT_IN_PAGE_FLAGS #endif +#endif #endif /* _LINUX_PAGE_FLAGS_LAYOUT */ -- cgit From 315c69261dd3fa12dbc830d4fa00d1fad98d3b03 Mon Sep 17 00:00:00 2001 From: Paul Wise Date: Fri, 2 Aug 2019 21:49:05 -0700 Subject: coredump: split pipe command whitespace before expanding template Save the offsets of the start of each argument to avoid having to update pointers to each argument after every corename krealloc and to avoid having to duplicate the memory for the dump command. Executable names containing spaces were previously being expanded from %e or %E and then split in the middle of the filename. This is incorrect behaviour since an argument list can represent arguments with spaces. The splitting could lead to extra arguments being passed to the core dump handler that it might have interpreted as options or ignored completely. Core dump handlers that are not aware of this Linux kernel issue will be using %e or %E without considering that it may be split and so they will be vulnerable to processes with spaces in their names breaking their argument list. If their internals are otherwise well written, such as if they are written in shell but quote arguments, they will work better after this change than before. If they are not well written, then there is a slight chance of breakage depending on the details of the code but they will already be fairly broken by the split filenames. Core dump handlers that are aware of this Linux kernel issue will be placing %e or %E as the last item in their core_pattern and then aggregating all of the remaining arguments into one, separated by spaces. Alternatively they will be obtaining the filename via other methods. Both of these will be compatible with the new arrangement. A side effect from this change is that unknown template types (for example %z) result in an empty argument to the dump handler instead of the argument being dropped. This is a desired change as: It is easier for dump handlers to process empty arguments than dropped ones, especially if they are written in shell or don't pass each template item with a preceding command-line option in order to differentiate between individual template types. Most core_patterns in the wild do not use options so they can confuse different template types (especially numeric ones) if an earlier one gets dropped in old kernels. If the kernel introduces a new template type and a core_pattern uses it, the core dump handler might not expect that the argument can be dropped in old kernels. For example, this can result in security issues when %d is dropped in old kernels. This happened with the corekeeper package in Debian and resulted in the interface between corekeeper and Linux having to be rewritten to use command-line options to differentiate between template types. The core_pattern for most core dump handlers is written by the handler author who would generally not insert unknown template types so this change should be compatible with all the core dump handlers that exist. Link: http://lkml.kernel.org/r/20190528051142.24939-1-pabs3@bonedaddy.net Fixes: 74aadce98605 ("core_pattern: allow passing of arguments to user mode helper when core_pattern is a pipe") Signed-off-by: Paul Wise Reported-by: Jakub Wilk [https://bugs.debian.org/924398] Reported-by: Paul Wise [https://lore.kernel.org/linux-fsdevel/c8b7ecb8508895bf4adb62a748e2ea2c71854597.camel@bonedaddy.net/] Suggested-by: Jakub Wilk Acked-by: Neil Horman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/coredump.c | 44 +++++++++++++++++++++++++++++++++++++++----- 1 file changed, 39 insertions(+), 5 deletions(-) diff --git a/fs/coredump.c b/fs/coredump.c index e42e17e55bfd..b1ea7dfbd149 100644 --- a/fs/coredump.c +++ b/fs/coredump.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include @@ -187,11 +188,13 @@ put_exe_file: * name into corename, which must have space for at least * CORENAME_MAX_SIZE bytes plus one byte for the zero terminator. */ -static int format_corename(struct core_name *cn, struct coredump_params *cprm) +static int format_corename(struct core_name *cn, struct coredump_params *cprm, + size_t **argv, int *argc) { const struct cred *cred = current_cred(); const char *pat_ptr = core_pattern; int ispipe = (*pat_ptr == '|'); + bool was_space = false; int pid_in_pattern = 0; int err = 0; @@ -201,12 +204,35 @@ static int format_corename(struct core_name *cn, struct coredump_params *cprm) return -ENOMEM; cn->corename[0] = '\0'; - if (ispipe) + if (ispipe) { + int argvs = sizeof(core_pattern) / 2; + (*argv) = kmalloc_array(argvs, sizeof(**argv), GFP_KERNEL); + if (!(*argv)) + return -ENOMEM; + (*argv)[(*argc)++] = 0; ++pat_ptr; + } /* Repeat as long as we have more pattern to process and more output space */ while (*pat_ptr) { + /* + * Split on spaces before doing template expansion so that + * %e and %E don't get split if they have spaces in them + */ + if (ispipe) { + if (isspace(*pat_ptr)) { + was_space = true; + pat_ptr++; + continue; + } else if (was_space) { + was_space = false; + err = cn_printf(cn, "%c", '\0'); + if (err) + return err; + (*argv)[(*argc)++] = cn->used; + } + } if (*pat_ptr != '%') { err = cn_printf(cn, "%c", *pat_ptr++); } else { @@ -546,6 +572,8 @@ void do_coredump(const kernel_siginfo_t *siginfo) struct cred *cred; int retval = 0; int ispipe; + size_t *argv = NULL; + int argc = 0; struct files_struct *displaced; /* require nonrelative corefile path and be extra careful */ bool need_suid_safe = false; @@ -592,9 +620,10 @@ void do_coredump(const kernel_siginfo_t *siginfo) old_cred = override_creds(cred); - ispipe = format_corename(&cn, &cprm); + ispipe = format_corename(&cn, &cprm, &argv, &argc); if (ispipe) { + int argi; int dump_count; char **helper_argv; struct subprocess_info *sub_info; @@ -637,12 +666,16 @@ void do_coredump(const kernel_siginfo_t *siginfo) goto fail_dropcount; } - helper_argv = argv_split(GFP_KERNEL, cn.corename, NULL); + helper_argv = kmalloc_array(argc + 1, sizeof(*helper_argv), + GFP_KERNEL); if (!helper_argv) { printk(KERN_WARNING "%s failed to allocate memory\n", __func__); goto fail_dropcount; } + for (argi = 0; argi < argc; argi++) + helper_argv[argi] = cn.corename + argv[argi]; + helper_argv[argi] = NULL; retval = -ENOMEM; sub_info = call_usermodehelper_setup(helper_argv[0], @@ -652,7 +685,7 @@ void do_coredump(const kernel_siginfo_t *siginfo) retval = call_usermodehelper_exec(sub_info, UMH_WAIT_EXEC); - argv_free(helper_argv); + kfree(helper_argv); if (retval) { printk(KERN_INFO "Core dump to |%s pipe failed\n", cn.corename); @@ -766,6 +799,7 @@ fail_dropcount: if (ispipe) atomic_dec(&core_dump_count); fail_unlock: + kfree(argv); kfree(cn.corename); coredump_finish(mm, core_dumped); revert_creds(old_cred); -- cgit From 7b358c6f12dc82364f6d317f8c8f1d794adbc3f5 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Fri, 2 Aug 2019 21:49:08 -0700 Subject: mm/migrate.c: initialize pud_entry in migrate_vma() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When CONFIG_MIGRATE_VMA_HELPER is enabled, migrate_vma() calls migrate_vma_collect() which initializes a struct mm_walk but didn't initialize mm_walk.pud_entry. (Found by code inspection) Use a C structure initialization to make sure it is set to NULL. Link: http://lkml.kernel.org/r/20190719233225.12243-1-rcampbell@nvidia.com Fixes: 8763cb45ab967 ("mm/migrate: new memory migration helper for use with device memory") Signed-off-by: Ralph Campbell Reviewed-by: John Hubbard Reviewed-by: Andrew Morton Cc: "Jérôme Glisse" Cc: Mel Gorman Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/migrate.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/mm/migrate.c b/mm/migrate.c index 515718392b24..a42858d8e00b 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -2340,16 +2340,13 @@ next: static void migrate_vma_collect(struct migrate_vma *migrate) { struct mmu_notifier_range range; - struct mm_walk mm_walk; - - mm_walk.pmd_entry = migrate_vma_collect_pmd; - mm_walk.pte_entry = NULL; - mm_walk.pte_hole = migrate_vma_collect_hole; - mm_walk.hugetlb_entry = NULL; - mm_walk.test_walk = NULL; - mm_walk.vma = migrate->vma; - mm_walk.mm = migrate->vma->vm_mm; - mm_walk.private = migrate; + struct mm_walk mm_walk = { + .pmd_entry = migrate_vma_collect_pmd, + .pte_hole = migrate_vma_collect_hole, + .vma = migrate->vma, + .mm = migrate->vma->vm_mm, + .private = migrate, + }; mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, NULL, mm_walk.mm, migrate->start, -- cgit From aa4996b3af19f8535177ba21cb7241348a34fb94 Mon Sep 17 00:00:00 2001 From: Weitao Hou Date: Fri, 2 Aug 2019 21:49:12 -0700 Subject: mm/memory_hotplug.c: remove unneeded return for void function return is unneeded in void function Link: http://lkml.kernel.org/r/20190723130814.21826-1-houweitaoo@gmail.com Signed-off-by: Weitao Hou Reviewed-by: David Hildenbrand Reviewed-by: Oscar Salvador Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory_hotplug.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 2a9bbddb0e55..c73f09913165 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -132,7 +132,6 @@ static void release_memory_resource(struct resource *res) return; release_resource(res); kfree(res); - return; } #ifdef CONFIG_MEMORY_HOTPLUG_SPARSE @@ -979,7 +978,6 @@ static void rollback_node_hotadd(int nid) arch_refresh_nodedata(nid, NULL); free_percpu(pgdat->per_cpu_nodestats); arch_free_nodedata(pgdat); - return; } -- cgit From b59b1baab789eacdde809135542e3d4f256f6878 Mon Sep 17 00:00:00 2001 From: Chris Down Date: Fri, 2 Aug 2019 21:49:15 -0700 Subject: cgroup: kselftest: relax fs_spec checks On my laptop most memcg kselftests were being skipped because it claimed cgroup v2 hierarchy wasn't mounted, but this isn't correct. Instead, it seems current systemd HEAD mounts it with the name "cgroup2" instead of "cgroup": % grep cgroup /proc/mounts cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate 0 0 I can't think of a reason to need to check fs_spec explicitly since it's arbitrary, so we can just rely on fs_vfstype. After these changes, `make TARGETS=cgroup kselftest` actually runs the cgroup v2 tests in more cases. Link: http://lkml.kernel.org/r/20190723210737.GA487@chrisdown.name Signed-off-by: Chris Down Cc: Johannes Weiner Cc: Tejun Heo Cc: Roman Gushchin Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- tools/testing/selftests/cgroup/cgroup_util.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/tools/testing/selftests/cgroup/cgroup_util.c b/tools/testing/selftests/cgroup/cgroup_util.c index 4c223266299a..bdb69599c4bd 100644 --- a/tools/testing/selftests/cgroup/cgroup_util.c +++ b/tools/testing/selftests/cgroup/cgroup_util.c @@ -191,8 +191,7 @@ int cg_find_unified_root(char *root, size_t len) strtok(NULL, delim); strtok(NULL, delim); - if (strcmp(fs, "cgroup") == 0 && - strcmp(type, "cgroup2") == 0) { + if (strcmp(type, "cgroup2") == 0) { strncpy(root, mount, len); return 0; } -- cgit From cbedfe11347fe418621bd188d58a206beb676218 Mon Sep 17 00:00:00 2001 From: Qian Cai Date: Fri, 2 Aug 2019 21:49:19 -0700 Subject: asm-generic: fix -Wtype-limits compiler warnings Commit d66acc39c7ce ("bitops: Optimise get_order()") introduced a compilation warning because "rx_frag_size" is an "ushort" while PAGE_SHIFT here is 16. The commit changed the get_order() to be a multi-line macro where compilers insist to check all statements in the macro even when __builtin_constant_p(rx_frag_size) will return false as "rx_frag_size" is a module parameter. In file included from ./arch/powerpc/include/asm/page_64.h:107, from ./arch/powerpc/include/asm/page.h:242, from ./arch/powerpc/include/asm/mmu.h:132, from ./arch/powerpc/include/asm/lppaca.h:47, from ./arch/powerpc/include/asm/paca.h:17, from ./arch/powerpc/include/asm/current.h:13, from ./include/linux/thread_info.h:21, from ./arch/powerpc/include/asm/processor.h:39, from ./include/linux/prefetch.h:15, from drivers/net/ethernet/emulex/benet/be_main.c:14: drivers/net/ethernet/emulex/benet/be_main.c: In function 'be_rx_cqs_create': ./include/asm-generic/getorder.h:54:9: warning: comparison is always true due to limited range of data type [-Wtype-limits] (((n) < (1UL << PAGE_SHIFT)) ? 0 : \ ^ drivers/net/ethernet/emulex/benet/be_main.c:3138:33: note: in expansion of macro 'get_order' adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE; ^~~~~~~~~ Fix it by moving all of this multi-line macro into a proper function, and killing __get_order() off. [akpm@linux-foundation.org: remove __get_order() altogether] [cai@lca.pw: v2] Link: http://lkml.kernel.org/r/1564000166-31428-1-git-send-email-cai@lca.pw Link: http://lkml.kernel.org/r/1563914986-26502-1-git-send-email-cai@lca.pw Fixes: d66acc39c7ce ("bitops: Optimise get_order()") Signed-off-by: Qian Cai Reviewed-by: Nathan Chancellor Cc: David S. Miller Cc: Arnd Bergmann Cc: David Howells Cc: Jakub Jelinek Cc: Nick Desaulniers Cc: Bill Wendling Cc: James Y Knight Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/getorder.h | 50 +++++++++++++++++------------------------- 1 file changed, 20 insertions(+), 30 deletions(-) diff --git a/include/asm-generic/getorder.h b/include/asm-generic/getorder.h index c64bea7a52be..e9f20b813a69 100644 --- a/include/asm-generic/getorder.h +++ b/include/asm-generic/getorder.h @@ -7,24 +7,6 @@ #include #include -/* - * Runtime evaluation of get_order() - */ -static inline __attribute_const__ -int __get_order(unsigned long size) -{ - int order; - - size--; - size >>= PAGE_SHIFT; -#if BITS_PER_LONG == 32 - order = fls(size); -#else - order = fls64(size); -#endif - return order; -} - /** * get_order - Determine the allocation order of a memory size * @size: The size for which to get the order @@ -43,19 +25,27 @@ int __get_order(unsigned long size) * to hold an object of the specified size. * * The result is undefined if the size is 0. - * - * This function may be used to initialise variables with compile time - * evaluations of constants. */ -#define get_order(n) \ -( \ - __builtin_constant_p(n) ? ( \ - ((n) == 0UL) ? BITS_PER_LONG - PAGE_SHIFT : \ - (((n) < (1UL << PAGE_SHIFT)) ? 0 : \ - ilog2((n) - 1) - PAGE_SHIFT + 1) \ - ) : \ - __get_order(n) \ -) +static inline __attribute_const__ int get_order(unsigned long size) +{ + if (__builtin_constant_p(size)) { + if (!size) + return BITS_PER_LONG - PAGE_SHIFT; + + if (size < (1UL << PAGE_SHIFT)) + return 0; + + return ilog2((size) - 1) - PAGE_SHIFT + 1; + } + + size--; + size >>= PAGE_SHIFT; +#if BITS_PER_LONG == 32 + return fls(size); +#else + return fls64(size); +#endif +} #endif /* __ASSEMBLY__ */ -- cgit From 733d1d1a7745113e2b6a1761300e7e26b6eb6009 Mon Sep 17 00:00:00 2001 From: Alexander Potapenko Date: Fri, 2 Aug 2019 21:49:22 -0700 Subject: lib/test_meminit.c: use GFP_ATOMIC in RCU critical section kmalloc() shouldn't sleep while in RCU critical section, therefore use GFP_ATOMIC instead of GFP_KERNEL. The bug was spotted by the 0day kernel testing robot. Link: http://lkml.kernel.org/r/20190725121703.210874-1-glider@google.com Fixes: 7e659650cbda ("lib: introduce test_meminit module") Signed-off-by: Alexander Potapenko Reviewed-by: Andrew Morton Reported-by: kernel test robot Cc: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/test_meminit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/test_meminit.c b/lib/test_meminit.c index 62d19f270cad..9729f271d150 100644 --- a/lib/test_meminit.c +++ b/lib/test_meminit.c @@ -222,7 +222,7 @@ static int __init do_kmem_cache_size(size_t size, bool want_ctor, * Copy the buffer to check that it's not wiped on * free(). */ - buf_copy = kmalloc(size, GFP_KERNEL); + buf_copy = kmalloc(size, GFP_ATOMIC); if (buf_copy) memcpy(buf_copy, buf, size); -- cgit From 14c5cebad510c2875ca525f36605b47058769670 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 2 Aug 2019 21:49:26 -0700 Subject: memremap: move from kernel/ to mm/ memremap.c implements MM functionality for ZONE_DEVICE, so it really should be in the mm/ directory, not the kernel/ one. Link: http://lkml.kernel.org/r/20190722094143.18387-1-hch@lst.de Signed-off-by: Christoph Hellwig Reviewed-by: Anshuman Khandual Acked-by: Dan Williams Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/Makefile | 1 - kernel/memremap.c | 405 ------------------------------------------------------ mm/Makefile | 1 + mm/memremap.c | 405 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 406 insertions(+), 406 deletions(-) delete mode 100644 kernel/memremap.c create mode 100644 mm/memremap.c diff --git a/kernel/Makefile b/kernel/Makefile index a8d923b5481b..ef0d95a190b4 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -111,7 +111,6 @@ obj-$(CONFIG_CONTEXT_TRACKING) += context_tracking.o obj-$(CONFIG_TORTURE_TEST) += torture.o obj-$(CONFIG_HAS_IOMEM) += iomem.o -obj-$(CONFIG_ZONE_DEVICE) += memremap.o obj-$(CONFIG_RSEQ) += rseq.o obj-$(CONFIG_GCC_PLUGIN_STACKLEAK) += stackleak.o diff --git a/kernel/memremap.c b/kernel/memremap.c deleted file mode 100644 index 6ee03a816d67..000000000000 --- a/kernel/memremap.c +++ /dev/null @@ -1,405 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* Copyright(c) 2015 Intel Corporation. All rights reserved. */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static DEFINE_XARRAY(pgmap_array); -#define SECTION_MASK ~((1UL << PA_SECTION_SHIFT) - 1) -#define SECTION_SIZE (1UL << PA_SECTION_SHIFT) - -#ifdef CONFIG_DEV_PAGEMAP_OPS -DEFINE_STATIC_KEY_FALSE(devmap_managed_key); -EXPORT_SYMBOL(devmap_managed_key); -static atomic_t devmap_managed_enable; - -static void devmap_managed_enable_put(void *data) -{ - if (atomic_dec_and_test(&devmap_managed_enable)) - static_branch_disable(&devmap_managed_key); -} - -static int devmap_managed_enable_get(struct device *dev, struct dev_pagemap *pgmap) -{ - if (!pgmap->ops || !pgmap->ops->page_free) { - WARN(1, "Missing page_free method\n"); - return -EINVAL; - } - - if (atomic_inc_return(&devmap_managed_enable) == 1) - static_branch_enable(&devmap_managed_key); - return devm_add_action_or_reset(dev, devmap_managed_enable_put, NULL); -} -#else -static int devmap_managed_enable_get(struct device *dev, struct dev_pagemap *pgmap) -{ - return -EINVAL; -} -#endif /* CONFIG_DEV_PAGEMAP_OPS */ - -static void pgmap_array_delete(struct resource *res) -{ - xa_store_range(&pgmap_array, PHYS_PFN(res->start), PHYS_PFN(res->end), - NULL, GFP_KERNEL); - synchronize_rcu(); -} - -static unsigned long pfn_first(struct dev_pagemap *pgmap) -{ - return PHYS_PFN(pgmap->res.start) + - vmem_altmap_offset(pgmap_altmap(pgmap)); -} - -static unsigned long pfn_end(struct dev_pagemap *pgmap) -{ - const struct resource *res = &pgmap->res; - - return (res->start + resource_size(res)) >> PAGE_SHIFT; -} - -static unsigned long pfn_next(unsigned long pfn) -{ - if (pfn % 1024 == 0) - cond_resched(); - return pfn + 1; -} - -#define for_each_device_pfn(pfn, map) \ - for (pfn = pfn_first(map); pfn < pfn_end(map); pfn = pfn_next(pfn)) - -static void dev_pagemap_kill(struct dev_pagemap *pgmap) -{ - if (pgmap->ops && pgmap->ops->kill) - pgmap->ops->kill(pgmap); - else - percpu_ref_kill(pgmap->ref); -} - -static void dev_pagemap_cleanup(struct dev_pagemap *pgmap) -{ - if (pgmap->ops && pgmap->ops->cleanup) { - pgmap->ops->cleanup(pgmap); - } else { - wait_for_completion(&pgmap->done); - percpu_ref_exit(pgmap->ref); - } -} - -static void devm_memremap_pages_release(void *data) -{ - struct dev_pagemap *pgmap = data; - struct device *dev = pgmap->dev; - struct resource *res = &pgmap->res; - unsigned long pfn; - int nid; - - dev_pagemap_kill(pgmap); - for_each_device_pfn(pfn, pgmap) - put_page(pfn_to_page(pfn)); - dev_pagemap_cleanup(pgmap); - - /* pages are dead and unused, undo the arch mapping */ - nid = page_to_nid(pfn_to_page(PHYS_PFN(res->start))); - - mem_hotplug_begin(); - if (pgmap->type == MEMORY_DEVICE_PRIVATE) { - pfn = PHYS_PFN(res->start); - __remove_pages(page_zone(pfn_to_page(pfn)), pfn, - PHYS_PFN(resource_size(res)), NULL); - } else { - arch_remove_memory(nid, res->start, resource_size(res), - pgmap_altmap(pgmap)); - kasan_remove_zero_shadow(__va(res->start), resource_size(res)); - } - mem_hotplug_done(); - - untrack_pfn(NULL, PHYS_PFN(res->start), resource_size(res)); - pgmap_array_delete(res); - dev_WARN_ONCE(dev, pgmap->altmap.alloc, - "%s: failed to free all reserved pages\n", __func__); -} - -static void dev_pagemap_percpu_release(struct percpu_ref *ref) -{ - struct dev_pagemap *pgmap = - container_of(ref, struct dev_pagemap, internal_ref); - - complete(&pgmap->done); -} - -/** - * devm_memremap_pages - remap and provide memmap backing for the given resource - * @dev: hosting device for @res - * @pgmap: pointer to a struct dev_pagemap - * - * Notes: - * 1/ At a minimum the res and type members of @pgmap must be initialized - * by the caller before passing it to this function - * - * 2/ The altmap field may optionally be initialized, in which case - * PGMAP_ALTMAP_VALID must be set in pgmap->flags. - * - * 3/ The ref field may optionally be provided, in which pgmap->ref must be - * 'live' on entry and will be killed and reaped at - * devm_memremap_pages_release() time, or if this routine fails. - * - * 4/ res is expected to be a host memory range that could feasibly be - * treated as a "System RAM" range, i.e. not a device mmio range, but - * this is not enforced. - */ -void *devm_memremap_pages(struct device *dev, struct dev_pagemap *pgmap) -{ - struct resource *res = &pgmap->res; - struct dev_pagemap *conflict_pgmap; - struct mhp_restrictions restrictions = { - /* - * We do not want any optional features only our own memmap - */ - .altmap = pgmap_altmap(pgmap), - }; - pgprot_t pgprot = PAGE_KERNEL; - int error, nid, is_ram; - bool need_devmap_managed = true; - - switch (pgmap->type) { - case MEMORY_DEVICE_PRIVATE: - if (!IS_ENABLED(CONFIG_DEVICE_PRIVATE)) { - WARN(1, "Device private memory not supported\n"); - return ERR_PTR(-EINVAL); - } - if (!pgmap->ops || !pgmap->ops->migrate_to_ram) { - WARN(1, "Missing migrate_to_ram method\n"); - return ERR_PTR(-EINVAL); - } - break; - case MEMORY_DEVICE_FS_DAX: - if (!IS_ENABLED(CONFIG_ZONE_DEVICE) || - IS_ENABLED(CONFIG_FS_DAX_LIMITED)) { - WARN(1, "File system DAX not supported\n"); - return ERR_PTR(-EINVAL); - } - break; - case MEMORY_DEVICE_DEVDAX: - case MEMORY_DEVICE_PCI_P2PDMA: - need_devmap_managed = false; - break; - default: - WARN(1, "Invalid pgmap type %d\n", pgmap->type); - break; - } - - if (!pgmap->ref) { - if (pgmap->ops && (pgmap->ops->kill || pgmap->ops->cleanup)) - return ERR_PTR(-EINVAL); - - init_completion(&pgmap->done); - error = percpu_ref_init(&pgmap->internal_ref, - dev_pagemap_percpu_release, 0, GFP_KERNEL); - if (error) - return ERR_PTR(error); - pgmap->ref = &pgmap->internal_ref; - } else { - if (!pgmap->ops || !pgmap->ops->kill || !pgmap->ops->cleanup) { - WARN(1, "Missing reference count teardown definition\n"); - return ERR_PTR(-EINVAL); - } - } - - if (need_devmap_managed) { - error = devmap_managed_enable_get(dev, pgmap); - if (error) - return ERR_PTR(error); - } - - conflict_pgmap = get_dev_pagemap(PHYS_PFN(res->start), NULL); - if (conflict_pgmap) { - dev_WARN(dev, "Conflicting mapping in same section\n"); - put_dev_pagemap(conflict_pgmap); - error = -ENOMEM; - goto err_array; - } - - conflict_pgmap = get_dev_pagemap(PHYS_PFN(res->end), NULL); - if (conflict_pgmap) { - dev_WARN(dev, "Conflicting mapping in same section\n"); - put_dev_pagemap(conflict_pgmap); - error = -ENOMEM; - goto err_array; - } - - is_ram = region_intersects(res->start, resource_size(res), - IORESOURCE_SYSTEM_RAM, IORES_DESC_NONE); - - if (is_ram != REGION_DISJOINT) { - WARN_ONCE(1, "%s attempted on %s region %pr\n", __func__, - is_ram == REGION_MIXED ? "mixed" : "ram", res); - error = -ENXIO; - goto err_array; - } - - pgmap->dev = dev; - - error = xa_err(xa_store_range(&pgmap_array, PHYS_PFN(res->start), - PHYS_PFN(res->end), pgmap, GFP_KERNEL)); - if (error) - goto err_array; - - nid = dev_to_node(dev); - if (nid < 0) - nid = numa_mem_id(); - - error = track_pfn_remap(NULL, &pgprot, PHYS_PFN(res->start), 0, - resource_size(res)); - if (error) - goto err_pfn_remap; - - mem_hotplug_begin(); - - /* - * For device private memory we call add_pages() as we only need to - * allocate and initialize struct page for the device memory. More- - * over the device memory is un-accessible thus we do not want to - * create a linear mapping for the memory like arch_add_memory() - * would do. - * - * For all other device memory types, which are accessible by - * the CPU, we do want the linear mapping and thus use - * arch_add_memory(). - */ - if (pgmap->type == MEMORY_DEVICE_PRIVATE) { - error = add_pages(nid, PHYS_PFN(res->start), - PHYS_PFN(resource_size(res)), &restrictions); - } else { - error = kasan_add_zero_shadow(__va(res->start), resource_size(res)); - if (error) { - mem_hotplug_done(); - goto err_kasan; - } - - error = arch_add_memory(nid, res->start, resource_size(res), - &restrictions); - } - - if (!error) { - struct zone *zone; - - zone = &NODE_DATA(nid)->node_zones[ZONE_DEVICE]; - move_pfn_range_to_zone(zone, PHYS_PFN(res->start), - PHYS_PFN(resource_size(res)), restrictions.altmap); - } - - mem_hotplug_done(); - if (error) - goto err_add_memory; - - /* - * Initialization of the pages has been deferred until now in order - * to allow us to do the work while not holding the hotplug lock. - */ - memmap_init_zone_device(&NODE_DATA(nid)->node_zones[ZONE_DEVICE], - PHYS_PFN(res->start), - PHYS_PFN(resource_size(res)), pgmap); - percpu_ref_get_many(pgmap->ref, pfn_end(pgmap) - pfn_first(pgmap)); - - error = devm_add_action_or_reset(dev, devm_memremap_pages_release, - pgmap); - if (error) - return ERR_PTR(error); - - return __va(res->start); - - err_add_memory: - kasan_remove_zero_shadow(__va(res->start), resource_size(res)); - err_kasan: - untrack_pfn(NULL, PHYS_PFN(res->start), resource_size(res)); - err_pfn_remap: - pgmap_array_delete(res); - err_array: - dev_pagemap_kill(pgmap); - dev_pagemap_cleanup(pgmap); - return ERR_PTR(error); -} -EXPORT_SYMBOL_GPL(devm_memremap_pages); - -void devm_memunmap_pages(struct device *dev, struct dev_pagemap *pgmap) -{ - devm_release_action(dev, devm_memremap_pages_release, pgmap); -} -EXPORT_SYMBOL_GPL(devm_memunmap_pages); - -unsigned long vmem_altmap_offset(struct vmem_altmap *altmap) -{ - /* number of pfns from base where pfn_to_page() is valid */ - if (altmap) - return altmap->reserve + altmap->free; - return 0; -} - -void vmem_altmap_free(struct vmem_altmap *altmap, unsigned long nr_pfns) -{ - altmap->alloc -= nr_pfns; -} - -/** - * get_dev_pagemap() - take a new live reference on the dev_pagemap for @pfn - * @pfn: page frame number to lookup page_map - * @pgmap: optional known pgmap that already has a reference - * - * If @pgmap is non-NULL and covers @pfn it will be returned as-is. If @pgmap - * is non-NULL but does not cover @pfn the reference to it will be released. - */ -struct dev_pagemap *get_dev_pagemap(unsigned long pfn, - struct dev_pagemap *pgmap) -{ - resource_size_t phys = PFN_PHYS(pfn); - - /* - * In the cached case we're already holding a live reference. - */ - if (pgmap) { - if (phys >= pgmap->res.start && phys <= pgmap->res.end) - return pgmap; - put_dev_pagemap(pgmap); - } - - /* fall back to slow path lookup */ - rcu_read_lock(); - pgmap = xa_load(&pgmap_array, PHYS_PFN(phys)); - if (pgmap && !percpu_ref_tryget_live(pgmap->ref)) - pgmap = NULL; - rcu_read_unlock(); - - return pgmap; -} -EXPORT_SYMBOL_GPL(get_dev_pagemap); - -#ifdef CONFIG_DEV_PAGEMAP_OPS -void __put_devmap_managed_page(struct page *page) -{ - int count = page_ref_dec_return(page); - - /* - * If refcount is 1 then page is freed and refcount is stable as nobody - * holds a reference on the page. - */ - if (count == 1) { - /* Clear Active bit in case of parallel mark_page_accessed */ - __ClearPageActive(page); - __ClearPageWaiters(page); - - mem_cgroup_uncharge(page); - - page->pgmap->ops->page_free(page); - } else if (!count) - __put_page(page); -} -EXPORT_SYMBOL(__put_devmap_managed_page); -#endif /* CONFIG_DEV_PAGEMAP_OPS */ diff --git a/mm/Makefile b/mm/Makefile index 338e528ad436..d0b295c3b764 100644 --- a/mm/Makefile +++ b/mm/Makefile @@ -102,5 +102,6 @@ obj-$(CONFIG_FRAME_VECTOR) += frame_vector.o obj-$(CONFIG_DEBUG_PAGE_REF) += debug_page_ref.o obj-$(CONFIG_HARDENED_USERCOPY) += usercopy.o obj-$(CONFIG_PERCPU_STATS) += percpu-stats.o +obj-$(CONFIG_ZONE_DEVICE) += memremap.o obj-$(CONFIG_HMM_MIRROR) += hmm.o obj-$(CONFIG_MEMFD_CREATE) += memfd.o diff --git a/mm/memremap.c b/mm/memremap.c new file mode 100644 index 000000000000..6ee03a816d67 --- /dev/null +++ b/mm/memremap.c @@ -0,0 +1,405 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright(c) 2015 Intel Corporation. All rights reserved. */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static DEFINE_XARRAY(pgmap_array); +#define SECTION_MASK ~((1UL << PA_SECTION_SHIFT) - 1) +#define SECTION_SIZE (1UL << PA_SECTION_SHIFT) + +#ifdef CONFIG_DEV_PAGEMAP_OPS +DEFINE_STATIC_KEY_FALSE(devmap_managed_key); +EXPORT_SYMBOL(devmap_managed_key); +static atomic_t devmap_managed_enable; + +static void devmap_managed_enable_put(void *data) +{ + if (atomic_dec_and_test(&devmap_managed_enable)) + static_branch_disable(&devmap_managed_key); +} + +static int devmap_managed_enable_get(struct device *dev, struct dev_pagemap *pgmap) +{ + if (!pgmap->ops || !pgmap->ops->page_free) { + WARN(1, "Missing page_free method\n"); + return -EINVAL; + } + + if (atomic_inc_return(&devmap_managed_enable) == 1) + static_branch_enable(&devmap_managed_key); + return devm_add_action_or_reset(dev, devmap_managed_enable_put, NULL); +} +#else +static int devmap_managed_enable_get(struct device *dev, struct dev_pagemap *pgmap) +{ + return -EINVAL; +} +#endif /* CONFIG_DEV_PAGEMAP_OPS */ + +static void pgmap_array_delete(struct resource *res) +{ + xa_store_range(&pgmap_array, PHYS_PFN(res->start), PHYS_PFN(res->end), + NULL, GFP_KERNEL); + synchronize_rcu(); +} + +static unsigned long pfn_first(struct dev_pagemap *pgmap) +{ + return PHYS_PFN(pgmap->res.start) + + vmem_altmap_offset(pgmap_altmap(pgmap)); +} + +static unsigned long pfn_end(struct dev_pagemap *pgmap) +{ + const struct resource *res = &pgmap->res; + + return (res->start + resource_size(res)) >> PAGE_SHIFT; +} + +static unsigned long pfn_next(unsigned long pfn) +{ + if (pfn % 1024 == 0) + cond_resched(); + return pfn + 1; +} + +#define for_each_device_pfn(pfn, map) \ + for (pfn = pfn_first(map); pfn < pfn_end(map); pfn = pfn_next(pfn)) + +static void dev_pagemap_kill(struct dev_pagemap *pgmap) +{ + if (pgmap->ops && pgmap->ops->kill) + pgmap->ops->kill(pgmap); + else + percpu_ref_kill(pgmap->ref); +} + +static void dev_pagemap_cleanup(struct dev_pagemap *pgmap) +{ + if (pgmap->ops && pgmap->ops->cleanup) { + pgmap->ops->cleanup(pgmap); + } else { + wait_for_completion(&pgmap->done); + percpu_ref_exit(pgmap->ref); + } +} + +static void devm_memremap_pages_release(void *data) +{ + struct dev_pagemap *pgmap = data; + struct device *dev = pgmap->dev; + struct resource *res = &pgmap->res; + unsigned long pfn; + int nid; + + dev_pagemap_kill(pgmap); + for_each_device_pfn(pfn, pgmap) + put_page(pfn_to_page(pfn)); + dev_pagemap_cleanup(pgmap); + + /* pages are dead and unused, undo the arch mapping */ + nid = page_to_nid(pfn_to_page(PHYS_PFN(res->start))); + + mem_hotplug_begin(); + if (pgmap->type == MEMORY_DEVICE_PRIVATE) { + pfn = PHYS_PFN(res->start); + __remove_pages(page_zone(pfn_to_page(pfn)), pfn, + PHYS_PFN(resource_size(res)), NULL); + } else { + arch_remove_memory(nid, res->start, resource_size(res), + pgmap_altmap(pgmap)); + kasan_remove_zero_shadow(__va(res->start), resource_size(res)); + } + mem_hotplug_done(); + + untrack_pfn(NULL, PHYS_PFN(res->start), resource_size(res)); + pgmap_array_delete(res); + dev_WARN_ONCE(dev, pgmap->altmap.alloc, + "%s: failed to free all reserved pages\n", __func__); +} + +static void dev_pagemap_percpu_release(struct percpu_ref *ref) +{ + struct dev_pagemap *pgmap = + container_of(ref, struct dev_pagemap, internal_ref); + + complete(&pgmap->done); +} + +/** + * devm_memremap_pages - remap and provide memmap backing for the given resource + * @dev: hosting device for @res + * @pgmap: pointer to a struct dev_pagemap + * + * Notes: + * 1/ At a minimum the res and type members of @pgmap must be initialized + * by the caller before passing it to this function + * + * 2/ The altmap field may optionally be initialized, in which case + * PGMAP_ALTMAP_VALID must be set in pgmap->flags. + * + * 3/ The ref field may optionally be provided, in which pgmap->ref must be + * 'live' on entry and will be killed and reaped at + * devm_memremap_pages_release() time, or if this routine fails. + * + * 4/ res is expected to be a host memory range that could feasibly be + * treated as a "System RAM" range, i.e. not a device mmio range, but + * this is not enforced. + */ +void *devm_memremap_pages(struct device *dev, struct dev_pagemap *pgmap) +{ + struct resource *res = &pgmap->res; + struct dev_pagemap *conflict_pgmap; + struct mhp_restrictions restrictions = { + /* + * We do not want any optional features only our own memmap + */ + .altmap = pgmap_altmap(pgmap), + }; + pgprot_t pgprot = PAGE_KERNEL; + int error, nid, is_ram; + bool need_devmap_managed = true; + + switch (pgmap->type) { + case MEMORY_DEVICE_PRIVATE: + if (!IS_ENABLED(CONFIG_DEVICE_PRIVATE)) { + WARN(1, "Device private memory not supported\n"); + return ERR_PTR(-EINVAL); + } + if (!pgmap->ops || !pgmap->ops->migrate_to_ram) { + WARN(1, "Missing migrate_to_ram method\n"); + return ERR_PTR(-EINVAL); + } + break; + case MEMORY_DEVICE_FS_DAX: + if (!IS_ENABLED(CONFIG_ZONE_DEVICE) || + IS_ENABLED(CONFIG_FS_DAX_LIMITED)) { + WARN(1, "File system DAX not supported\n"); + return ERR_PTR(-EINVAL); + } + break; + case MEMORY_DEVICE_DEVDAX: + case MEMORY_DEVICE_PCI_P2PDMA: + need_devmap_managed = false; + break; + default: + WARN(1, "Invalid pgmap type %d\n", pgmap->type); + break; + } + + if (!pgmap->ref) { + if (pgmap->ops && (pgmap->ops->kill || pgmap->ops->cleanup)) + return ERR_PTR(-EINVAL); + + init_completion(&pgmap->done); + error = percpu_ref_init(&pgmap->internal_ref, + dev_pagemap_percpu_release, 0, GFP_KERNEL); + if (error) + return ERR_PTR(error); + pgmap->ref = &pgmap->internal_ref; + } else { + if (!pgmap->ops || !pgmap->ops->kill || !pgmap->ops->cleanup) { + WARN(1, "Missing reference count teardown definition\n"); + return ERR_PTR(-EINVAL); + } + } + + if (need_devmap_managed) { + error = devmap_managed_enable_get(dev, pgmap); + if (error) + return ERR_PTR(error); + } + + conflict_pgmap = get_dev_pagemap(PHYS_PFN(res->start), NULL); + if (conflict_pgmap) { + dev_WARN(dev, "Conflicting mapping in same section\n"); + put_dev_pagemap(conflict_pgmap); + error = -ENOMEM; + goto err_array; + } + + conflict_pgmap = get_dev_pagemap(PHYS_PFN(res->end), NULL); + if (conflict_pgmap) { + dev_WARN(dev, "Conflicting mapping in same section\n"); + put_dev_pagemap(conflict_pgmap); + error = -ENOMEM; + goto err_array; + } + + is_ram = region_intersects(res->start, resource_size(res), + IORESOURCE_SYSTEM_RAM, IORES_DESC_NONE); + + if (is_ram != REGION_DISJOINT) { + WARN_ONCE(1, "%s attempted on %s region %pr\n", __func__, + is_ram == REGION_MIXED ? "mixed" : "ram", res); + error = -ENXIO; + goto err_array; + } + + pgmap->dev = dev; + + error = xa_err(xa_store_range(&pgmap_array, PHYS_PFN(res->start), + PHYS_PFN(res->end), pgmap, GFP_KERNEL)); + if (error) + goto err_array; + + nid = dev_to_node(dev); + if (nid < 0) + nid = numa_mem_id(); + + error = track_pfn_remap(NULL, &pgprot, PHYS_PFN(res->start), 0, + resource_size(res)); + if (error) + goto err_pfn_remap; + + mem_hotplug_begin(); + + /* + * For device private memory we call add_pages() as we only need to + * allocate and initialize struct page for the device memory. More- + * over the device memory is un-accessible thus we do not want to + * create a linear mapping for the memory like arch_add_memory() + * would do. + * + * For all other device memory types, which are accessible by + * the CPU, we do want the linear mapping and thus use + * arch_add_memory(). + */ + if (pgmap->type == MEMORY_DEVICE_PRIVATE) { + error = add_pages(nid, PHYS_PFN(res->start), + PHYS_PFN(resource_size(res)), &restrictions); + } else { + error = kasan_add_zero_shadow(__va(res->start), resource_size(res)); + if (error) { + mem_hotplug_done(); + goto err_kasan; + } + + error = arch_add_memory(nid, res->start, resource_size(res), + &restrictions); + } + + if (!error) { + struct zone *zone; + + zone = &NODE_DATA(nid)->node_zones[ZONE_DEVICE]; + move_pfn_range_to_zone(zone, PHYS_PFN(res->start), + PHYS_PFN(resource_size(res)), restrictions.altmap); + } + + mem_hotplug_done(); + if (error) + goto err_add_memory; + + /* + * Initialization of the pages has been deferred until now in order + * to allow us to do the work while not holding the hotplug lock. + */ + memmap_init_zone_device(&NODE_DATA(nid)->node_zones[ZONE_DEVICE], + PHYS_PFN(res->start), + PHYS_PFN(resource_size(res)), pgmap); + percpu_ref_get_many(pgmap->ref, pfn_end(pgmap) - pfn_first(pgmap)); + + error = devm_add_action_or_reset(dev, devm_memremap_pages_release, + pgmap); + if (error) + return ERR_PTR(error); + + return __va(res->start); + + err_add_memory: + kasan_remove_zero_shadow(__va(res->start), resource_size(res)); + err_kasan: + untrack_pfn(NULL, PHYS_PFN(res->start), resource_size(res)); + err_pfn_remap: + pgmap_array_delete(res); + err_array: + dev_pagemap_kill(pgmap); + dev_pagemap_cleanup(pgmap); + return ERR_PTR(error); +} +EXPORT_SYMBOL_GPL(devm_memremap_pages); + +void devm_memunmap_pages(struct device *dev, struct dev_pagemap *pgmap) +{ + devm_release_action(dev, devm_memremap_pages_release, pgmap); +} +EXPORT_SYMBOL_GPL(devm_memunmap_pages); + +unsigned long vmem_altmap_offset(struct vmem_altmap *altmap) +{ + /* number of pfns from base where pfn_to_page() is valid */ + if (altmap) + return altmap->reserve + altmap->free; + return 0; +} + +void vmem_altmap_free(struct vmem_altmap *altmap, unsigned long nr_pfns) +{ + altmap->alloc -= nr_pfns; +} + +/** + * get_dev_pagemap() - take a new live reference on the dev_pagemap for @pfn + * @pfn: page frame number to lookup page_map + * @pgmap: optional known pgmap that already has a reference + * + * If @pgmap is non-NULL and covers @pfn it will be returned as-is. If @pgmap + * is non-NULL but does not cover @pfn the reference to it will be released. + */ +struct dev_pagemap *get_dev_pagemap(unsigned long pfn, + struct dev_pagemap *pgmap) +{ + resource_size_t phys = PFN_PHYS(pfn); + + /* + * In the cached case we're already holding a live reference. + */ + if (pgmap) { + if (phys >= pgmap->res.start && phys <= pgmap->res.end) + return pgmap; + put_dev_pagemap(pgmap); + } + + /* fall back to slow path lookup */ + rcu_read_lock(); + pgmap = xa_load(&pgmap_array, PHYS_PFN(phys)); + if (pgmap && !percpu_ref_tryget_live(pgmap->ref)) + pgmap = NULL; + rcu_read_unlock(); + + return pgmap; +} +EXPORT_SYMBOL_GPL(get_dev_pagemap); + +#ifdef CONFIG_DEV_PAGEMAP_OPS +void __put_devmap_managed_page(struct page *page) +{ + int count = page_ref_dec_return(page); + + /* + * If refcount is 1 then page is freed and refcount is stable as nobody + * holds a reference on the page. + */ + if (count == 1) { + /* Clear Active bit in case of parallel mark_page_accessed */ + __ClearPageActive(page); + __ClearPageWaiters(page); + + mem_cgroup_uncharge(page); + + page->pgmap->ops->page_free(page); + } else if (!count) + __put_page(page); +} +EXPORT_SYMBOL(__put_devmap_managed_page); +#endif /* CONFIG_DEV_PAGEMAP_OPS */ -- cgit From 7291edca20215dfdf0eb841881d63753448ef09c Mon Sep 17 00:00:00 2001 From: David Hildenbrand Date: Fri, 2 Aug 2019 21:49:29 -0700 Subject: drivers/acpi/scan.c: document why we don't need the device_hotplug_lock Let's document why the lock is not needed in acpi_scan_init(), right now this is not really obvious. [akpm@linux-foundation.org: fix tpyo] Link: http://lkml.kernel.org/r/20190731135306.31524-1-david@redhat.com Signed-off-by: David Hildenbrand Acked-by: Michal Hocko Acked-by: Rafael J. Wysocki Cc: Oscar Salvador Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/acpi/scan.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 0e28270b0fd8..aad6be5c0af0 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -2204,6 +2204,12 @@ int __init acpi_scan_init(void) acpi_gpe_apply_masked_gpes(); acpi_update_all_gpes(); + /* + * Although we call __add_memory() that is documented to require the + * device_hotplug_lock, it is not necessary here because this is an + * early code when userspace or any other code path cannot trigger + * hotplug/hotunplug operations. + */ mutex_lock(&acpi_scan_lock); /* * Enumerate devices in the ACPI namespace. -- cgit From 5e5412c365a32e452daa762eac36121cb8a370bb Mon Sep 17 00:00:00 2001 From: Qian Cai Date: Tue, 30 Jul 2019 11:30:33 -0400 Subject: net/socket: fix GCC8+ Wpacked-not-aligned warnings There are a lot of those warnings with GCC8+ 64-bit, In file included from ./include/linux/sctp.h:42, from net/core/skbuff.c:47: ./include/uapi/linux/sctp.h:395:1: warning: alignment 4 of 'struct sctp_paddr_change' is less than 8 [-Wpacked-not-aligned] } __attribute__((packed, aligned(4))); ^ ./include/uapi/linux/sctp.h:728:1: warning: alignment 4 of 'struct sctp_setpeerprim' is less than 8 [-Wpacked-not-aligned] } __attribute__((packed, aligned(4))); ^ ./include/uapi/linux/sctp.h:727:26: warning: 'sspp_addr' offset 4 in 'struct sctp_setpeerprim' isn't aligned to 8 [-Wpacked-not-aligned] struct sockaddr_storage sspp_addr; ^~~~~~~~~ ./include/uapi/linux/sctp.h:741:1: warning: alignment 4 of 'struct sctp_prim' is less than 8 [-Wpacked-not-aligned] } __attribute__((packed, aligned(4))); ^ ./include/uapi/linux/sctp.h:740:26: warning: 'ssp_addr' offset 4 in 'struct sctp_prim' isn't aligned to 8 [-Wpacked-not-aligned] struct sockaddr_storage ssp_addr; ^~~~~~~~ ./include/uapi/linux/sctp.h:792:1: warning: alignment 4 of 'struct sctp_paddrparams' is less than 8 [-Wpacked-not-aligned] } __attribute__((packed, aligned(4))); ^ ./include/uapi/linux/sctp.h:784:26: warning: 'spp_address' offset 4 in 'struct sctp_paddrparams' isn't aligned to 8 [-Wpacked-not-aligned] struct sockaddr_storage spp_address; ^~~~~~~~~~~ ./include/uapi/linux/sctp.h:905:1: warning: alignment 4 of 'struct sctp_paddrinfo' is less than 8 [-Wpacked-not-aligned] } __attribute__((packed, aligned(4))); ^ ./include/uapi/linux/sctp.h:899:26: warning: 'spinfo_address' offset 4 in 'struct sctp_paddrinfo' isn't aligned to 8 [-Wpacked-not-aligned] struct sockaddr_storage spinfo_address; ^~~~~~~~~~~~~~ This is because the commit 20c9c825b12f ("[SCTP] Fix SCTP socket options to work with 32-bit apps on 64-bit kernels.") added "packed, aligned(4)" GCC attributes to some structures but one of the members, i.e, "struct sockaddr_storage" in those structures has the attribute, "aligned(__alignof__ (struct sockaddr *)" which is 8-byte on 64-bit systems, so the commit overwrites the designed alignments for "sockaddr_storage". To fix this, "struct sockaddr_storage" needs to be aligned to 4-byte as it is only used in those packed sctp structure which is part of UAPI, and "struct __kernel_sockaddr_storage" is used in some other places of UAPI that need not to change alignments in order to not breaking userspace. Use an implicit alignment for "struct __kernel_sockaddr_storage" so it can keep the same alignments as a member in both packed and un-packed structures without breaking UAPI. Suggested-by: David Laight Signed-off-by: Qian Cai Signed-off-by: David S. Miller --- include/uapi/linux/socket.h | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/include/uapi/linux/socket.h b/include/uapi/linux/socket.h index 8eb96021709c..c3409c8ec0dd 100644 --- a/include/uapi/linux/socket.h +++ b/include/uapi/linux/socket.h @@ -6,17 +6,24 @@ * Desired design of maximum size and alignment (see RFC2553) */ #define _K_SS_MAXSIZE 128 /* Implementation specific max size */ -#define _K_SS_ALIGNSIZE (__alignof__ (struct sockaddr *)) - /* Implementation specific desired alignment */ typedef unsigned short __kernel_sa_family_t; +/* + * The definition uses anonymous union and struct in order to control the + * default alignment. + */ struct __kernel_sockaddr_storage { - __kernel_sa_family_t ss_family; /* address family */ - /* Following field(s) are implementation specific */ - char __data[_K_SS_MAXSIZE - sizeof(unsigned short)]; + union { + struct { + __kernel_sa_family_t ss_family; /* address family */ + /* Following field(s) are implementation specific */ + char __data[_K_SS_MAXSIZE - sizeof(unsigned short)]; /* space to achieve desired size, */ /* _SS_MAXSIZE value minus size of ss_family */ -} __attribute__ ((aligned(_K_SS_ALIGNSIZE))); /* force desired alignment */ + }; + void *__align; /* implementation specific desired alignment */ + }; +}; #endif /* _UAPI_LINUX_SOCKET_H */ -- cgit From 4c92057661a3412f547ede95715641d7ee16ddac Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Sat, 3 Aug 2019 21:21:54 +0200 Subject: Documentation: Add swapgs description to the Spectre v1 documentation Add documentation to the Spectre document about the new swapgs variant of Spectre v1. Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner --- Documentation/admin-guide/hw-vuln/spectre.rst | 88 ++++++++++++++++++++++++--- 1 file changed, 80 insertions(+), 8 deletions(-) diff --git a/Documentation/admin-guide/hw-vuln/spectre.rst b/Documentation/admin-guide/hw-vuln/spectre.rst index 25f3b2532198..e05e581af5cf 100644 --- a/Documentation/admin-guide/hw-vuln/spectre.rst +++ b/Documentation/admin-guide/hw-vuln/spectre.rst @@ -41,10 +41,11 @@ Related CVEs The following CVE entries describe Spectre variants: - ============= ======================= ================= + ============= ======================= ========================== CVE-2017-5753 Bounds check bypass Spectre variant 1 CVE-2017-5715 Branch target injection Spectre variant 2 - ============= ======================= ================= + CVE-2019-1125 Spectre v1 swapgs Spectre variant 1 (swapgs) + ============= ======================= ========================== Problem ------- @@ -78,6 +79,13 @@ There are some extensions of Spectre variant 1 attacks for reading data over the network, see :ref:`[12] `. However such attacks are difficult, low bandwidth, fragile, and are considered low risk. +Note that, despite "Bounds Check Bypass" name, Spectre variant 1 is not +only about user-controlled array bounds checks. It can affect any +conditional checks. The kernel entry code interrupt, exception, and NMI +handlers all have conditional swapgs checks. Those may be problematic +in the context of Spectre v1, as kernel code can speculatively run with +a user GS. + Spectre variant 2 (Branch Target Injection) ------------------------------------------- @@ -132,6 +140,9 @@ not cover all possible attack vectors. 1. A user process attacking the kernel ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Spectre variant 1 +~~~~~~~~~~~~~~~~~ + The attacker passes a parameter to the kernel via a register or via a known address in memory during a syscall. Such parameter may be used later by the kernel as an index to an array or to derive @@ -144,7 +155,40 @@ not cover all possible attack vectors. potentially be influenced for Spectre attacks, new "nospec" accessor macros are used to prevent speculative loading of data. - Spectre variant 2 attacker can :ref:`poison ` the branch +Spectre variant 1 (swapgs) +~~~~~~~~~~~~~~~~~~~~~~~~~~ + + An attacker can train the branch predictor to speculatively skip the + swapgs path for an interrupt or exception. If they initialize + the GS register to a user-space value, if the swapgs is speculatively + skipped, subsequent GS-related percpu accesses in the speculation + window will be done with the attacker-controlled GS value. This + could cause privileged memory to be accessed and leaked. + + For example: + + :: + + if (coming from user space) + swapgs + mov %gs:, %reg + mov (%reg), %reg1 + + When coming from user space, the CPU can speculatively skip the + swapgs, and then do a speculative percpu load using the user GS + value. So the user can speculatively force a read of any kernel + value. If a gadget exists which uses the percpu value as an address + in another load/store, then the contents of the kernel value may + become visible via an L1 side channel attack. + + A similar attack exists when coming from kernel space. The CPU can + speculatively do the swapgs, causing the user GS to get used for the + rest of the speculative window. + +Spectre variant 2 +~~~~~~~~~~~~~~~~~ + + A spectre variant 2 attacker can :ref:`poison ` the branch target buffer (BTB) before issuing syscall to launch an attack. After entering the kernel, the kernel could use the poisoned branch target buffer on indirect jump and jump to gadget code in speculative @@ -280,11 +324,18 @@ The sysfs file showing Spectre variant 1 mitigation status is: The possible values in this file are: - ======================================= ================================= - 'Mitigation: __user pointer sanitation' Protection in kernel on a case by - case base with explicit pointer - sanitation. - ======================================= ================================= + .. list-table:: + + * - 'Not affected' + - The processor is not vulnerable. + * - 'Vulnerable: __user pointer sanitization and usercopy barriers only; no swapgs barriers' + - The swapgs protections are disabled; otherwise it has + protection in the kernel on a case by case base with explicit + pointer sanitation and usercopy LFENCE barriers. + * - 'Mitigation: usercopy/swapgs barriers and __user pointer sanitization' + - Protection in the kernel on a case by case base with explicit + pointer sanitation, usercopy LFENCE barriers, and swapgs LFENCE + barriers. However, the protections are put in place on a case by case basis, and there is no guarantee that all possible attack vectors for Spectre @@ -366,12 +417,27 @@ Turning on mitigation for Spectre variant 1 and Spectre variant 2 1. Kernel mitigation ^^^^^^^^^^^^^^^^^^^^ +Spectre variant 1 +~~~~~~~~~~~~~~~~~ + For the Spectre variant 1, vulnerable kernel code (as determined by code audit or scanning tools) is annotated on a case by case basis to use nospec accessor macros for bounds clipping :ref:`[2] ` to avoid any usable disclosure gadgets. However, it may not cover all attack vectors for Spectre variant 1. + Copy-from-user code has an LFENCE barrier to prevent the access_ok() + check from being mis-speculated. The barrier is done by the + barrier_nospec() macro. + + For the swapgs variant of Spectre variant 1, LFENCE barriers are + added to interrupt, exception and NMI entry where needed. These + barriers are done by the FENCE_SWAPGS_KERNEL_ENTRY and + FENCE_SWAPGS_USER_ENTRY macros. + +Spectre variant 2 +~~~~~~~~~~~~~~~~~ + For Spectre variant 2 mitigation, the compiler turns indirect calls or jumps in the kernel into equivalent return trampolines (retpolines) :ref:`[3] ` :ref:`[9] ` to go to the target @@ -473,6 +539,12 @@ Mitigation control on the kernel command line Spectre variant 2 mitigation can be disabled or force enabled at the kernel command line. + nospectre_v1 + + [X86,PPC] Disable mitigations for Spectre Variant 1 + (bounds check bypass). With this option data leaks are + possible in the system. + nospectre_v2 [X86] Disable all mitigations for the Spectre variant 2 -- cgit From 0c5b6c28ed68becb692b43eae5e44d5aa7e160ce Mon Sep 17 00:00:00 2001 From: "M. Vefa Bicakci" Date: Sat, 3 Aug 2019 06:02:12 -0400 Subject: kconfig: Clear "written" flag to avoid data loss Prior to this commit, starting nconfig, xconfig or gconfig, and saving the .config file more than once caused data loss, where a .config file that contained only comments would be written to disk starting from the second save operation. This bug manifests itself because the SYMBOL_WRITTEN flag is never cleared after the first call to conf_write, and subsequent calls to conf_write then skip all of the configuration symbols due to the SYMBOL_WRITTEN flag being set. This commit resolves this issue by clearing the SYMBOL_WRITTEN flag from all symbols before conf_write returns. Fixes: 8e2442a5f86e ("kconfig: fix missing choice values in auto.conf") Cc: linux-stable # 4.19+ Signed-off-by: M. Vefa Bicakci Signed-off-by: Masahiro Yamada --- scripts/kconfig/confdata.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 1134892599da..3569d2dec37c 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -848,6 +848,7 @@ int conf_write(const char *name) const char *str; char tmpname[PATH_MAX + 1], oldname[PATH_MAX + 1]; char *env; + int i; bool need_newline = false; if (!name) @@ -930,6 +931,9 @@ next: } fclose(out); + for_all_symbols(i, sym) + sym->flags &= ~SYMBOL_WRITTEN; + if (*tmpname) { if (is_same(name, tmpname)) { conf_message("No change to %s", name); -- cgit From 4c0d228c3bd498b3119d68eb41a17880f7728993 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 29 Jul 2019 19:56:58 +0200 Subject: MAINTAINERS: Add Geert as Renesas SoC Co-Maintainer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit At the end of the v5.3 upstream kernel development cycle, Simon will be stepping down from his role as Renesas SoC maintainer. Starting with the v5.4 development cycle, Geert is taking over this role. Add Geert as a co-maintainer, and add his git repository and branch. Signed-off-by: Geert Uytterhoeven Reviewed-by: Niklas Söderlund Acked-by: Simon Horman Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 0f5004592ffc..a2c343ee3b2c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2155,10 +2155,12 @@ F: Documentation/devicetree/bindings/arm/realtek.txt ARM/RENESAS ARM64 ARCHITECTURE M: Simon Horman +M: Geert Uytterhoeven M: Magnus Damm L: linux-renesas-soc@vger.kernel.org Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next +T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next S: Supported F: arch/arm64/boot/dts/renesas/ F: Documentation/devicetree/bindings/arm/renesas.yaml @@ -2269,10 +2271,12 @@ F: drivers/media/platform/s5p-mfc/ ARM/SHMOBILE ARM ARCHITECTURE M: Simon Horman +M: Geert Uytterhoeven M: Magnus Damm L: linux-renesas-soc@vger.kernel.org Q: http://patchwork.kernel.org/project/linux-renesas-soc/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next +T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next S: Supported F: arch/arm/boot/dts/emev2* F: arch/arm/boot/dts/gr-peach* -- cgit From 1e5ac6300a07ceecfc70a893ebef3352be21e6f8 Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Thu, 4 Jul 2019 09:26:15 +0200 Subject: tpm: Fix null pointer dereference on chip register error path If clk_enable is not defined and chip initialization is canceled code hits null dereference. Easily reproducible with vTPM init fail: swtpm chardev --tpmstate dir=nonexistent_dir --tpm2 --vtpm-proxy BUG: kernel NULL pointer dereference, address: 00000000 ... Call Trace: tpm_chip_start+0x9d/0xa0 [tpm] tpm_chip_register+0x10/0x1a0 [tpm] vtpm_proxy_work+0x11/0x30 [tpm_vtpm_proxy] process_one_work+0x214/0x5a0 worker_thread+0x134/0x3e0 ? process_one_work+0x5a0/0x5a0 kthread+0xd4/0x100 ? process_one_work+0x5a0/0x5a0 ? kthread_park+0x90/0x90 ret_from_fork+0x19/0x24 Fixes: 719b7d81f204 ("tpm: introduce tpm_chip_start() and tpm_chip_stop()") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Milan Broz Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm-chip.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c index d47ad10a35fe..bf868260f435 100644 --- a/drivers/char/tpm/tpm-chip.c +++ b/drivers/char/tpm/tpm-chip.c @@ -77,6 +77,18 @@ static int tpm_go_idle(struct tpm_chip *chip) return chip->ops->go_idle(chip); } +static void tpm_clk_enable(struct tpm_chip *chip) +{ + if (chip->ops->clk_enable) + chip->ops->clk_enable(chip, true); +} + +static void tpm_clk_disable(struct tpm_chip *chip) +{ + if (chip->ops->clk_enable) + chip->ops->clk_enable(chip, false); +} + /** * tpm_chip_start() - power on the TPM * @chip: a TPM chip to use @@ -89,13 +101,12 @@ int tpm_chip_start(struct tpm_chip *chip) { int ret; - if (chip->ops->clk_enable) - chip->ops->clk_enable(chip, true); + tpm_clk_enable(chip); if (chip->locality == -1) { ret = tpm_request_locality(chip); if (ret) { - chip->ops->clk_enable(chip, false); + tpm_clk_disable(chip); return ret; } } @@ -103,8 +114,7 @@ int tpm_chip_start(struct tpm_chip *chip) ret = tpm_cmd_ready(chip); if (ret) { tpm_relinquish_locality(chip); - if (chip->ops->clk_enable) - chip->ops->clk_enable(chip, false); + tpm_clk_disable(chip); return ret; } @@ -124,8 +134,7 @@ void tpm_chip_stop(struct tpm_chip *chip) { tpm_go_idle(chip); tpm_relinquish_locality(chip); - if (chip->ops->clk_enable) - chip->ops->clk_enable(chip, false); + tpm_clk_disable(chip); } EXPORT_SYMBOL_GPL(tpm_chip_stop); -- cgit From fa4f99c05320eb28bf6ba52a9adf64d888da1f9e Mon Sep 17 00:00:00 2001 From: Nayna Jain Date: Thu, 11 Jul 2019 12:13:35 -0400 Subject: tpm: tpm_ibm_vtpm: Fix unallocated banks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The nr_allocated_banks and allocated banks are initialized as part of tpm_chip_register. Currently, this is done as part of auto startup function. However, some drivers, like the ibm vtpm driver, do not run auto startup during initialization. This results in uninitialized memory issue and causes a kernel panic during boot. This patch moves the pcr allocation outside the auto startup function into tpm_chip_register. This ensures that allocated banks are initialized in any case. Fixes: 879b589210a9 ("tpm: retrieve digest size of unknown algorithms with PCR read") Reported-by: Michal Suchanek Signed-off-by: Nayna Jain Reviewed-by: Mimi Zohar Tested-by: Sachin Sant Tested-by: Michal Suchánek Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen --- drivers/char/tpm/tpm-chip.c | 20 ++++++++++++++++++++ drivers/char/tpm/tpm.h | 2 ++ drivers/char/tpm/tpm1-cmd.c | 36 ++++++++++++++++++++++++------------ drivers/char/tpm/tpm2-cmd.c | 6 +----- 4 files changed, 47 insertions(+), 17 deletions(-) diff --git a/drivers/char/tpm/tpm-chip.c b/drivers/char/tpm/tpm-chip.c index bf868260f435..4838c6a9f0f2 100644 --- a/drivers/char/tpm/tpm-chip.c +++ b/drivers/char/tpm/tpm-chip.c @@ -554,6 +554,20 @@ static int tpm_add_hwrng(struct tpm_chip *chip) return hwrng_register(&chip->hwrng); } +static int tpm_get_pcr_allocation(struct tpm_chip *chip) +{ + int rc; + + rc = (chip->flags & TPM_CHIP_FLAG_TPM2) ? + tpm2_get_pcr_allocation(chip) : + tpm1_get_pcr_allocation(chip); + + if (rc > 0) + return -ENODEV; + + return rc; +} + /* * tpm_chip_register() - create a character device for the TPM chip * @chip: TPM chip to use. @@ -573,6 +587,12 @@ int tpm_chip_register(struct tpm_chip *chip) if (rc) return rc; rc = tpm_auto_startup(chip); + if (rc) { + tpm_chip_stop(chip); + return rc; + } + + rc = tpm_get_pcr_allocation(chip); tpm_chip_stop(chip); if (rc) return rc; diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h index e503ffc3aa39..a7fea3e0ca86 100644 --- a/drivers/char/tpm/tpm.h +++ b/drivers/char/tpm/tpm.h @@ -394,6 +394,7 @@ int tpm1_pcr_read(struct tpm_chip *chip, u32 pcr_idx, u8 *res_buf); ssize_t tpm1_getcap(struct tpm_chip *chip, u32 subcap_id, cap_t *cap, const char *desc, size_t min_cap_length); int tpm1_get_random(struct tpm_chip *chip, u8 *out, size_t max); +int tpm1_get_pcr_allocation(struct tpm_chip *chip); unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal); int tpm_pm_suspend(struct device *dev); int tpm_pm_resume(struct device *dev); @@ -449,6 +450,7 @@ int tpm2_unseal_trusted(struct tpm_chip *chip, ssize_t tpm2_get_tpm_pt(struct tpm_chip *chip, u32 property_id, u32 *value, const char *desc); +ssize_t tpm2_get_pcr_allocation(struct tpm_chip *chip); int tpm2_auto_startup(struct tpm_chip *chip); void tpm2_shutdown(struct tpm_chip *chip, u16 shutdown_type); unsigned long tpm2_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal); diff --git a/drivers/char/tpm/tpm1-cmd.c b/drivers/char/tpm/tpm1-cmd.c index faacbe1ffa1a..149e953ca369 100644 --- a/drivers/char/tpm/tpm1-cmd.c +++ b/drivers/char/tpm/tpm1-cmd.c @@ -699,18 +699,6 @@ int tpm1_auto_startup(struct tpm_chip *chip) goto out; } - chip->allocated_banks = kcalloc(1, sizeof(*chip->allocated_banks), - GFP_KERNEL); - if (!chip->allocated_banks) { - rc = -ENOMEM; - goto out; - } - - chip->allocated_banks[0].alg_id = TPM_ALG_SHA1; - chip->allocated_banks[0].digest_size = hash_digest_size[HASH_ALGO_SHA1]; - chip->allocated_banks[0].crypto_id = HASH_ALGO_SHA1; - chip->nr_allocated_banks = 1; - return rc; out: if (rc > 0) @@ -779,3 +767,27 @@ int tpm1_pm_suspend(struct tpm_chip *chip, u32 tpm_suspend_pcr) return rc; } +/** + * tpm1_get_pcr_allocation() - initialize the allocated bank + * @chip: TPM chip to use. + * + * The function initializes the SHA1 allocated bank to extend PCR + * + * Return: + * * 0 on success, + * * < 0 on error. + */ +int tpm1_get_pcr_allocation(struct tpm_chip *chip) +{ + chip->allocated_banks = kcalloc(1, sizeof(*chip->allocated_banks), + GFP_KERNEL); + if (!chip->allocated_banks) + return -ENOMEM; + + chip->allocated_banks[0].alg_id = TPM_ALG_SHA1; + chip->allocated_banks[0].digest_size = hash_digest_size[HASH_ALGO_SHA1]; + chip->allocated_banks[0].crypto_id = HASH_ALGO_SHA1; + chip->nr_allocated_banks = 1; + + return 0; +} diff --git a/drivers/char/tpm/tpm2-cmd.c b/drivers/char/tpm/tpm2-cmd.c index d103545e4055..ba9acae83bff 100644 --- a/drivers/char/tpm/tpm2-cmd.c +++ b/drivers/char/tpm/tpm2-cmd.c @@ -840,7 +840,7 @@ struct tpm2_pcr_selection { u8 pcr_select[3]; } __packed; -static ssize_t tpm2_get_pcr_allocation(struct tpm_chip *chip) +ssize_t tpm2_get_pcr_allocation(struct tpm_chip *chip) { struct tpm2_pcr_selection pcr_selection; struct tpm_buf buf; @@ -1040,10 +1040,6 @@ int tpm2_auto_startup(struct tpm_chip *chip) goto out; } - rc = tpm2_get_pcr_allocation(chip); - if (rc) - goto out; - rc = tpm2_get_cc_attrs_tbl(chip); out: -- cgit From e21a712a9685488f5ce80495b37b9fdbe96c230d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 4 Aug 2019 18:40:12 -0700 Subject: Linux 5.3-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 5ee6f6889869..23cdf1f41364 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 3 SUBLEVEL = 0 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Bobtail Squid # *DOCUMENTATION* -- cgit From 8c39a39e28b86a4021d9be314ce01019bafa5fdc Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 19 Jul 2019 13:48:44 -0400 Subject: NFSv4: Fix a credential refcount leak in nfs41_check_delegation_stateid It is unsafe to dereference delegation outside the rcu lock, and in any case, the refcount is guaranteed held if cred is non-zero. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 39896afc6edf..a6d73609b163 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2778,8 +2778,7 @@ static void nfs41_check_delegation_stateid(struct nfs4_state *state) if (status == -NFS4ERR_EXPIRED || status == -NFS4ERR_BAD_STATEID) nfs_finish_clear_delegation_stateid(state, &stateid); - if (delegation->cred) - put_cred(cred); + put_cred(cred); } /** -- cgit From 5eb8d18ca0e001c6055da2b7f30d8f6dca23a44f Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 19 Jul 2019 14:08:37 -0400 Subject: NFSv4: Fix delegation state recovery Once we clear the NFS_DELEGATED_STATE flag, we're telling nfs_delegation_claim_opens() that we're done recovering all open state for that stateid, so we really need to ensure that we test for all open modes that are currently cached and recover them before exiting nfs4_open_delegation_recall(). Fixes: 24311f884189d ("NFSv4: Recovery of recalled read delegations...") Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org # v4.3+ --- fs/nfs/delegation.c | 2 +- fs/nfs/delegation.h | 2 +- fs/nfs/nfs4proc.c | 25 ++++++++++++------------- 3 files changed, 14 insertions(+), 15 deletions(-) diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c index 0ff3facf81da..0af854cce8ff 100644 --- a/fs/nfs/delegation.c +++ b/fs/nfs/delegation.c @@ -153,7 +153,7 @@ again: /* Block nfs4_proc_unlck */ mutex_lock(&sp->so_delegreturn_mutex); seq = raw_seqcount_begin(&sp->so_reclaim_seqcount); - err = nfs4_open_delegation_recall(ctx, state, stateid, type); + err = nfs4_open_delegation_recall(ctx, state, stateid); if (!err) err = nfs_delegation_claim_locks(state, stateid); if (!err && read_seqcount_retry(&sp->so_reclaim_seqcount, seq)) diff --git a/fs/nfs/delegation.h b/fs/nfs/delegation.h index 5799777df5ec..9eb87ae4c982 100644 --- a/fs/nfs/delegation.h +++ b/fs/nfs/delegation.h @@ -63,7 +63,7 @@ void nfs_reap_expired_delegations(struct nfs_client *clp); /* NFSv4 delegation-related procedures */ int nfs4_proc_delegreturn(struct inode *inode, const struct cred *cred, const nfs4_stateid *stateid, int issync); -int nfs4_open_delegation_recall(struct nfs_open_context *ctx, struct nfs4_state *state, const nfs4_stateid *stateid, fmode_t type); +int nfs4_open_delegation_recall(struct nfs_open_context *ctx, struct nfs4_state *state, const nfs4_stateid *stateid); int nfs4_lock_delegation_recall(struct file_lock *fl, struct nfs4_state *state, const nfs4_stateid *stateid); bool nfs4_copy_delegation_stateid(struct inode *inode, fmode_t flags, nfs4_stateid *dst, const struct cred **cred); bool nfs4_refresh_delegation_stateid(nfs4_stateid *dst, struct inode *inode); diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index a6d73609b163..21e3c159bc69 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2177,12 +2177,10 @@ static int nfs4_handle_delegation_recall_error(struct nfs_server *server, struct case -NFS4ERR_BAD_HIGH_SLOT: case -NFS4ERR_CONN_NOT_BOUND_TO_SESSION: case -NFS4ERR_DEADSESSION: - set_bit(NFS_DELEGATED_STATE, &state->flags); nfs4_schedule_session_recovery(server->nfs_client->cl_session, err); return -EAGAIN; case -NFS4ERR_STALE_CLIENTID: case -NFS4ERR_STALE_STATEID: - set_bit(NFS_DELEGATED_STATE, &state->flags); /* Don't recall a delegation if it was lost */ nfs4_schedule_lease_recovery(server->nfs_client); return -EAGAIN; @@ -2203,7 +2201,6 @@ static int nfs4_handle_delegation_recall_error(struct nfs_server *server, struct return -EAGAIN; case -NFS4ERR_DELAY: case -NFS4ERR_GRACE: - set_bit(NFS_DELEGATED_STATE, &state->flags); ssleep(1); return -EAGAIN; case -ENOMEM: @@ -2219,8 +2216,7 @@ static int nfs4_handle_delegation_recall_error(struct nfs_server *server, struct } int nfs4_open_delegation_recall(struct nfs_open_context *ctx, - struct nfs4_state *state, const nfs4_stateid *stateid, - fmode_t type) + struct nfs4_state *state, const nfs4_stateid *stateid) { struct nfs_server *server = NFS_SERVER(state->inode); struct nfs4_opendata *opendata; @@ -2231,20 +2227,23 @@ int nfs4_open_delegation_recall(struct nfs_open_context *ctx, if (IS_ERR(opendata)) return PTR_ERR(opendata); nfs4_stateid_copy(&opendata->o_arg.u.delegation, stateid); - nfs_state_clear_delegation(state); - switch (type & (FMODE_READ|FMODE_WRITE)) { - case FMODE_READ|FMODE_WRITE: - case FMODE_WRITE: + if (!test_bit(NFS_O_RDWR_STATE, &state->flags)) { err = nfs4_open_recover_helper(opendata, FMODE_READ|FMODE_WRITE); if (err) - break; + goto out; + } + if (!test_bit(NFS_O_WRONLY_STATE, &state->flags)) { err = nfs4_open_recover_helper(opendata, FMODE_WRITE); if (err) - break; - /* Fall through */ - case FMODE_READ: + goto out; + } + if (!test_bit(NFS_O_RDONLY_STATE, &state->flags)) { err = nfs4_open_recover_helper(opendata, FMODE_READ); + if (err) + goto out; } + nfs_state_clear_delegation(state); +out: nfs4_opendata_put(opendata); return nfs4_handle_delegation_recall_error(server, state, stateid, NULL, err); } -- cgit From 86dbd08b32838dc8940ccab2eebd47cf80224494 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 22 Jul 2019 09:44:04 +0100 Subject: NFSv4: Print an error in the syslog when state is marked as irrecoverable When error recovery fails due to a fatal error on the server, ensure we log it in the syslog. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4state.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 9afd051a4876..a71a61e5fe2c 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1463,7 +1463,7 @@ void nfs_inode_find_state_and_recover(struct inode *inode, nfs4_schedule_state_manager(clp); } -static void nfs4_state_mark_open_context_bad(struct nfs4_state *state) +static void nfs4_state_mark_open_context_bad(struct nfs4_state *state, int err) { struct inode *inode = state->inode; struct nfs_inode *nfsi = NFS_I(inode); @@ -1474,6 +1474,8 @@ static void nfs4_state_mark_open_context_bad(struct nfs4_state *state) if (ctx->state != state) continue; set_bit(NFS_CONTEXT_BAD, &ctx->flags); + pr_warn("NFSv4: state recovery failed for open file %pd2, " + "error = %d\n", ctx->dentry, err); } rcu_read_unlock(); } @@ -1481,7 +1483,7 @@ static void nfs4_state_mark_open_context_bad(struct nfs4_state *state) static void nfs4_state_mark_recovery_failed(struct nfs4_state *state, int error) { set_bit(NFS_STATE_RECOVERY_FAILED, &state->flags); - nfs4_state_mark_open_context_bad(state); + nfs4_state_mark_open_context_bad(state, error); } -- cgit From c34fae003c79570b6c930b425fea3f0b7b1e7056 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 22 Jul 2019 09:54:29 +0100 Subject: NFSv4: When recovering state fails with EAGAIN, retry the same recovery If the server returns with EAGAIN when we're trying to recover from a server reboot, we currently delay for 1 second, but then mark the stateid as needing recovery after the grace period has expired. Instead, we should just retry the same recovery process immediately after the 1 second delay. Break out of the loop after 10 retries. Fixes: 35a61606a612 ("NFS: Reduce indentation of the switch statement...") Signed-off-by: Trond Myklebust --- fs/nfs/nfs4state.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index a71a61e5fe2c..d03b9cf42bd0 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1607,6 +1607,7 @@ static int __nfs4_reclaim_open_state(struct nfs4_state_owner *sp, struct nfs4_st static int nfs4_reclaim_open_state(struct nfs4_state_owner *sp, const struct nfs4_state_recovery_ops *ops) { struct nfs4_state *state; + unsigned int loop = 0; int status = 0; /* Note: we rely on the sp->so_states list being ordered @@ -1633,8 +1634,10 @@ restart: switch (status) { default: - if (status >= 0) + if (status >= 0) { + loop = 0; break; + } printk(KERN_ERR "NFS: %s: unhandled error %d\n", __func__, status); /* Fall through */ case -ENOENT: @@ -1648,6 +1651,10 @@ restart: break; case -EAGAIN: ssleep(1); + if (loop++ < 10) { + set_bit(ops->state_flag_bit, &state->flags); + break; + } /* Fall through */ case -NFS4ERR_ADMIN_REVOKED: case -NFS4ERR_STALE_STATEID: -- cgit From 731c74dd987e4f1f3179223314c039ce38dd4f19 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 22 Jul 2019 18:06:17 +0100 Subject: NFSv4: Report the error from nfs4_select_rw_stateid() In pnfs_update_layout() ensure that we do report any fatal errors from nfs4_select_rw_stateid(). Fixes: d9aba2b40de6 ("NFSv4: Don't use the zero stateid with layoutget") Signed-off-by: Trond Myklebust --- fs/nfs/pnfs.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 75bd5b552ba4..4525d5acae38 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -1903,12 +1903,6 @@ lookup_again: goto out_unlock; } - if (!nfs4_valid_open_stateid(ctx->state)) { - trace_pnfs_update_layout(ino, pos, count, iomode, lo, lseg, - PNFS_UPDATE_LAYOUT_INVALID_OPEN); - goto out_unlock; - } - /* * Choose a stateid for the LAYOUTGET. If we don't have a layout * stateid, or it has been invalidated, then we must use the open @@ -1939,6 +1933,7 @@ lookup_again: iomode == IOMODE_RW ? FMODE_WRITE : FMODE_READ, NULL, &stateid, NULL); if (status != 0) { + lseg = ERR_PTR(status); trace_pnfs_update_layout(ino, pos, count, iomode, lo, lseg, PNFS_UPDATE_LAYOUT_INVALID_OPEN); -- cgit From 27a30cf64a5cbe2105e4ff9613246b32d584766a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 22 Jul 2019 18:32:59 +0100 Subject: NFSv4.1: Fix open stateid recovery The logic for checking in nfs41_check_open_stateid() whether the state is supported by a delegation is inverted. In addition, it makes more sense to perform that check before we check for expired locks. Fixes: 8a64c4ef106d1 ("NFSv4.1: Even if the stateid is OK,...") Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 65 ++++++++++++++++++++++++++++++++----------------------- 1 file changed, 38 insertions(+), 27 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 21e3c159bc69..c9e14ce0b7b2 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1683,6 +1683,14 @@ static void nfs_state_set_open_stateid(struct nfs4_state *state, write_sequnlock(&state->seqlock); } +static void nfs_state_clear_open_state_flags(struct nfs4_state *state) +{ + clear_bit(NFS_O_RDWR_STATE, &state->flags); + clear_bit(NFS_O_WRONLY_STATE, &state->flags); + clear_bit(NFS_O_RDONLY_STATE, &state->flags); + clear_bit(NFS_OPEN_STATE, &state->flags); +} + static void nfs_state_set_delegation(struct nfs4_state *state, const nfs4_stateid *deleg_stateid, fmode_t fmode) @@ -2074,13 +2082,7 @@ static int nfs4_open_recover(struct nfs4_opendata *opendata, struct nfs4_state * { int ret; - /* Don't trigger recovery in nfs_test_and_clear_all_open_stateid */ - clear_bit(NFS_O_RDWR_STATE, &state->flags); - clear_bit(NFS_O_WRONLY_STATE, &state->flags); - clear_bit(NFS_O_RDONLY_STATE, &state->flags); /* memory barrier prior to reading state->n_* */ - clear_bit(NFS_DELEGATED_STATE, &state->flags); - clear_bit(NFS_OPEN_STATE, &state->flags); smp_rmb(); ret = nfs4_open_recover_helper(opendata, FMODE_READ|FMODE_WRITE); if (ret != 0) @@ -2156,6 +2158,8 @@ static int nfs4_open_reclaim(struct nfs4_state_owner *sp, struct nfs4_state *sta ctx = nfs4_state_find_open_context(state); if (IS_ERR(ctx)) return -EAGAIN; + clear_bit(NFS_DELEGATED_STATE, &state->flags); + nfs_state_clear_open_state_flags(state); ret = nfs4_do_open_reclaim(ctx, state); put_nfs_open_context(ctx); return ret; @@ -2697,6 +2701,7 @@ static int nfs40_open_expired(struct nfs4_state_owner *sp, struct nfs4_state *st { /* NFSv4.0 doesn't allow for delegation recovery on open expire */ nfs40_clear_delegation_stateid(state); + nfs_state_clear_open_state_flags(state); return nfs4_open_expired(sp, state); } @@ -2739,13 +2744,13 @@ out_free: return -NFS4ERR_EXPIRED; } -static void nfs41_check_delegation_stateid(struct nfs4_state *state) +static int nfs41_check_delegation_stateid(struct nfs4_state *state) { struct nfs_server *server = NFS_SERVER(state->inode); nfs4_stateid stateid; struct nfs_delegation *delegation; const struct cred *cred = NULL; - int status; + int status, ret = NFS_OK; /* Get the delegation credential for use by test/free_stateid */ rcu_read_lock(); @@ -2753,20 +2758,15 @@ static void nfs41_check_delegation_stateid(struct nfs4_state *state) if (delegation == NULL) { rcu_read_unlock(); nfs_state_clear_delegation(state); - return; + return NFS_OK; } nfs4_stateid_copy(&stateid, &delegation->stateid); - if (test_bit(NFS_DELEGATION_REVOKED, &delegation->flags)) { - rcu_read_unlock(); - nfs_state_clear_delegation(state); - return; - } if (!test_and_clear_bit(NFS_DELEGATION_TEST_EXPIRED, &delegation->flags)) { rcu_read_unlock(); - return; + return NFS_OK; } if (delegation->cred) @@ -2776,8 +2776,24 @@ static void nfs41_check_delegation_stateid(struct nfs4_state *state) trace_nfs4_test_delegation_stateid(state, NULL, status); if (status == -NFS4ERR_EXPIRED || status == -NFS4ERR_BAD_STATEID) nfs_finish_clear_delegation_stateid(state, &stateid); + else + ret = status; put_cred(cred); + return ret; +} + +static void nfs41_delegation_recover_stateid(struct nfs4_state *state) +{ + nfs4_stateid tmp; + + if (test_bit(NFS_DELEGATED_STATE, &state->flags) && + nfs4_copy_delegation_stateid(state->inode, state->state, + &tmp, NULL) && + nfs4_stateid_match_other(&state->stateid, &tmp)) + nfs_state_set_delegation(state, &tmp, state->state); + else + nfs_state_clear_delegation(state); } /** @@ -2847,21 +2863,12 @@ static int nfs41_check_open_stateid(struct nfs4_state *state) const struct cred *cred = state->owner->so_cred; int status; - if (test_bit(NFS_OPEN_STATE, &state->flags) == 0) { - if (test_bit(NFS_DELEGATED_STATE, &state->flags) == 0) { - if (nfs4_have_delegation(state->inode, state->state)) - return NFS_OK; - return -NFS4ERR_OPENMODE; - } + if (test_bit(NFS_OPEN_STATE, &state->flags) == 0) return -NFS4ERR_BAD_STATEID; - } status = nfs41_test_and_free_expired_stateid(server, stateid, cred); trace_nfs4_test_open_stateid(state, NULL, status); if (status == -NFS4ERR_EXPIRED || status == -NFS4ERR_BAD_STATEID) { - clear_bit(NFS_O_RDONLY_STATE, &state->flags); - clear_bit(NFS_O_WRONLY_STATE, &state->flags); - clear_bit(NFS_O_RDWR_STATE, &state->flags); - clear_bit(NFS_OPEN_STATE, &state->flags); + nfs_state_clear_open_state_flags(state); stateid->type = NFS4_INVALID_STATEID_TYPE; return status; } @@ -2874,7 +2881,11 @@ static int nfs41_open_expired(struct nfs4_state_owner *sp, struct nfs4_state *st { int status; - nfs41_check_delegation_stateid(state); + status = nfs41_check_delegation_stateid(state); + if (status != NFS_OK) + return status; + nfs41_delegation_recover_stateid(state); + status = nfs41_check_expired_locks(state); if (status != NFS_OK) return status; -- cgit From ad11408970df79d5f481aa9964e91f183133424c Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 26 Jul 2019 14:40:53 +0100 Subject: NFSv4.1: Only reap expired delegations Fix nfs_reap_expired_delegations() to ensure that we only reap delegations that are actually expired, rather than triggering on random errors. Fixes: 45870d6909d5a ("NFSv4.1: Test delegation stateids when server...") Signed-off-by: Trond Myklebust --- fs/nfs/delegation.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c index 0af854cce8ff..071b90a45933 100644 --- a/fs/nfs/delegation.c +++ b/fs/nfs/delegation.c @@ -1046,6 +1046,22 @@ void nfs_test_expired_all_delegations(struct nfs_client *clp) nfs4_schedule_state_manager(clp); } +static void +nfs_delegation_test_free_expired(struct inode *inode, + nfs4_stateid *stateid, + const struct cred *cred) +{ + struct nfs_server *server = NFS_SERVER(inode); + const struct nfs4_minor_version_ops *ops = server->nfs_client->cl_mvops; + int status; + + if (!cred) + return; + status = ops->test_and_free_expired(server, stateid, cred); + if (status == -NFS4ERR_EXPIRED || status == -NFS4ERR_BAD_STATEID) + nfs_remove_bad_delegation(inode, stateid); +} + /** * nfs_reap_expired_delegations - reap expired delegations * @clp: nfs_client to process @@ -1057,7 +1073,6 @@ void nfs_test_expired_all_delegations(struct nfs_client *clp) */ void nfs_reap_expired_delegations(struct nfs_client *clp) { - const struct nfs4_minor_version_ops *ops = clp->cl_mvops; struct nfs_delegation *delegation; struct nfs_server *server; struct inode *inode; @@ -1088,11 +1103,7 @@ restart: nfs4_stateid_copy(&stateid, &delegation->stateid); clear_bit(NFS_DELEGATION_TEST_EXPIRED, &delegation->flags); rcu_read_unlock(); - if (cred != NULL && - ops->test_and_free_expired(server, &stateid, cred) < 0) { - nfs_revoke_delegation(inode, &stateid); - nfs_inode_find_state_and_recover(inode, &stateid); - } + nfs_delegation_test_free_expired(inode, &stateid, cred); put_cred(cred); if (nfs4_server_rebooted(clp)) { nfs_inode_mark_test_expired_delegation(server,inode); -- cgit From e3c8dc761ead061da2220ee8f8132f729ac3ddfe Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 29 Jul 2019 18:25:00 +0100 Subject: NFSv4: Check the return value of update_open_stateid() Ensure that we always check the return value of update_open_stateid() so that we can retry if the update of local state failed. This fixes infinite looping on state recovery. Fixes: e23008ec81ef3 ("NFSv4 reduce attribute requests for open reclaim") Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org # v3.7+ --- fs/nfs/nfs4proc.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index c9e14ce0b7b2..3e0b93f2b61a 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1915,8 +1915,9 @@ _nfs4_opendata_reclaim_to_nfs4_state(struct nfs4_opendata *data) if (data->o_res.delegation_type != 0) nfs4_opendata_check_deleg(data, state); update: - update_open_stateid(state, &data->o_res.stateid, NULL, - data->o_arg.fmode); + if (!update_open_stateid(state, &data->o_res.stateid, + NULL, data->o_arg.fmode)) + return ERR_PTR(-EAGAIN); refcount_inc(&state->count); return state; @@ -1981,8 +1982,11 @@ _nfs4_opendata_to_nfs4_state(struct nfs4_opendata *data) if (data->o_res.delegation_type != 0) nfs4_opendata_check_deleg(data, state); - update_open_stateid(state, &data->o_res.stateid, NULL, - data->o_arg.fmode); + if (!update_open_stateid(state, &data->o_res.stateid, + NULL, data->o_arg.fmode)) { + nfs4_put_open_state(state); + state = ERR_PTR(-EAGAIN); + } out: nfs_release_seqid(data->o_arg.seqid); return state; -- cgit From c77e22834ae9a11891cb613bd9a551be1b94f2bc Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 3 Aug 2019 10:11:27 -0400 Subject: NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim() John Hubbard reports seeing the following stack trace: nfs4_do_reclaim rcu_read_lock /* we are now in_atomic() and must not sleep */ nfs4_purge_state_owners nfs4_free_state_owner nfs4_destroy_seqid_counter rpc_destroy_wait_queue cancel_delayed_work_sync __cancel_work_timer __flush_work start_flush_work might_sleep: (kernel/workqueue.c:2975: BUG) The solution is to separate out the freeing of the state owners from nfs4_purge_state_owners(), and perform that outside the atomic context. Reported-by: John Hubbard Fixes: 0aaaf5c424c7f ("NFS: Cache state owners after files are closed") Signed-off-by: Trond Myklebust --- fs/nfs/nfs4_fs.h | 3 ++- fs/nfs/nfs4client.c | 5 ++++- fs/nfs/nfs4state.c | 27 ++++++++++++++++++++++----- 3 files changed, 28 insertions(+), 7 deletions(-) diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index d778dad9a75e..3564da1ba8a1 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -465,7 +465,8 @@ static inline void nfs4_schedule_session_recovery(struct nfs4_session *session, extern struct nfs4_state_owner *nfs4_get_state_owner(struct nfs_server *, const struct cred *, gfp_t); extern void nfs4_put_state_owner(struct nfs4_state_owner *); -extern void nfs4_purge_state_owners(struct nfs_server *); +extern void nfs4_purge_state_owners(struct nfs_server *, struct list_head *); +extern void nfs4_free_state_owners(struct list_head *head); extern struct nfs4_state * nfs4_get_open_state(struct inode *, struct nfs4_state_owner *); extern void nfs4_put_open_state(struct nfs4_state *); extern void nfs4_close_state(struct nfs4_state *, fmode_t); diff --git a/fs/nfs/nfs4client.c b/fs/nfs/nfs4client.c index 616393a01c06..da6204025a2d 100644 --- a/fs/nfs/nfs4client.c +++ b/fs/nfs/nfs4client.c @@ -758,9 +758,12 @@ out: static void nfs4_destroy_server(struct nfs_server *server) { + LIST_HEAD(freeme); + nfs_server_return_all_delegations(server); unset_pnfs_layoutdriver(server); - nfs4_purge_state_owners(server); + nfs4_purge_state_owners(server, &freeme); + nfs4_free_state_owners(&freeme); } /* diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index d03b9cf42bd0..a4e866b2b43b 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -624,24 +624,39 @@ void nfs4_put_state_owner(struct nfs4_state_owner *sp) /** * nfs4_purge_state_owners - Release all cached state owners * @server: nfs_server with cached state owners to release + * @head: resulting list of state owners * * Called at umount time. Remaining state owners will be on * the LRU with ref count of zero. + * Note that the state owners are not freed, but are added + * to the list @head, which can later be used as an argument + * to nfs4_free_state_owners. */ -void nfs4_purge_state_owners(struct nfs_server *server) +void nfs4_purge_state_owners(struct nfs_server *server, struct list_head *head) { struct nfs_client *clp = server->nfs_client; struct nfs4_state_owner *sp, *tmp; - LIST_HEAD(doomed); spin_lock(&clp->cl_lock); list_for_each_entry_safe(sp, tmp, &server->state_owners_lru, so_lru) { - list_move(&sp->so_lru, &doomed); + list_move(&sp->so_lru, head); nfs4_remove_state_owner_locked(sp); } spin_unlock(&clp->cl_lock); +} - list_for_each_entry_safe(sp, tmp, &doomed, so_lru) { +/** + * nfs4_purge_state_owners - Release all cached state owners + * @head: resulting list of state owners + * + * Frees a list of state owners that was generated by + * nfs4_purge_state_owners + */ +void nfs4_free_state_owners(struct list_head *head) +{ + struct nfs4_state_owner *sp, *tmp; + + list_for_each_entry_safe(sp, tmp, head, so_lru) { list_del(&sp->so_lru); nfs4_free_state_owner(sp); } @@ -1865,12 +1880,13 @@ static int nfs4_do_reclaim(struct nfs_client *clp, const struct nfs4_state_recov struct nfs4_state_owner *sp; struct nfs_server *server; struct rb_node *pos; + LIST_HEAD(freeme); int status = 0; restart: rcu_read_lock(); list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link) { - nfs4_purge_state_owners(server); + nfs4_purge_state_owners(server, &freeme); spin_lock(&clp->cl_lock); for (pos = rb_first(&server->state_owners); pos != NULL; @@ -1899,6 +1915,7 @@ restart: spin_unlock(&clp->cl_lock); } rcu_read_unlock(); + nfs4_free_state_owners(&freeme); return 0; } -- cgit From 09a54f0ebfe263bc27c90bbd80187b9a93283887 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 3 Aug 2019 10:28:18 -0400 Subject: NFSv4: Fix an Oops in nfs4_do_setattr If the user specifies an open mode of 3, then we don't have a NFSv4 state attached to the context, and so we Oops when we try to dereference it. Reported-by: Olga Kornievskaia Fixes: 29b59f9416937 ("NFSv4: change nfs4_do_setattr to take...") Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org # v4.10: 991eedb1371dc: NFSv4: Only pass the... Cc: stable@vger.kernel.org # v4.10+ --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 3e0b93f2b61a..12b2b65ad8a8 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3214,7 +3214,7 @@ static int _nfs4_do_setattr(struct inode *inode, if (nfs4_copy_delegation_stateid(inode, FMODE_WRITE, &arg->stateid, &delegation_cred)) { /* Use that stateid */ - } else if (ctx != NULL) { + } else if (ctx != NULL && ctx->state) { struct nfs_lock_context *l_ctx; if (!nfs4_valid_open_stateid(ctx->state)) return -EBADF; -- cgit From dea1bb35c5f35e0577cfc61f79261d80b8715221 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 3 Aug 2019 13:39:24 -0400 Subject: NFS: Fix regression whereby fscache errors are appearing on 'nofsc' mounts People are reporing seeing fscache errors being reported concerning duplicate cookies even in cases where they are not setting up fscache at all. The rule needs to be that if fscache is not enabled, then it should have no side effects at all. To ensure this is the case, we disable fscache completely on all superblocks for which the 'fsc' mount option was not set. In order to avoid issues with '-oremount', we also disable the ability to turn fscache on via remount. Fixes: f1fe29b4a02d ("NFS: Use i_writecount to control whether...") Link: https://bugzilla.kernel.org/show_bug.cgi?id=200145 Signed-off-by: Trond Myklebust Cc: Steve Dickson Cc: David Howells --- fs/nfs/fscache.c | 7 ++++++- fs/nfs/fscache.h | 2 +- fs/nfs/super.c | 1 + 3 files changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/nfs/fscache.c b/fs/nfs/fscache.c index 53507aa96b0b..3800ab6f08fa 100644 --- a/fs/nfs/fscache.c +++ b/fs/nfs/fscache.c @@ -114,6 +114,10 @@ void nfs_fscache_get_super_cookie(struct super_block *sb, const char *uniq, int struct rb_node **p, *parent; int diff; + nfss->fscache_key = NULL; + nfss->fscache = NULL; + if (!(nfss->options & NFS_OPTION_FSCACHE)) + return; if (!uniq) { uniq = ""; ulen = 1; @@ -226,10 +230,11 @@ void nfs_fscache_release_super_cookie(struct super_block *sb) void nfs_fscache_init_inode(struct inode *inode) { struct nfs_fscache_inode_auxdata auxdata; + struct nfs_server *nfss = NFS_SERVER(inode); struct nfs_inode *nfsi = NFS_I(inode); nfsi->fscache = NULL; - if (!S_ISREG(inode->i_mode)) + if (!(nfss->fscache && S_ISREG(inode->i_mode))) return; memset(&auxdata, 0, sizeof(auxdata)); diff --git a/fs/nfs/fscache.h b/fs/nfs/fscache.h index 25a75e40d91d..ad041cfbf9ec 100644 --- a/fs/nfs/fscache.h +++ b/fs/nfs/fscache.h @@ -182,7 +182,7 @@ static inline void nfs_fscache_wait_on_invalidate(struct inode *inode) */ static inline const char *nfs_server_fscache_state(struct nfs_server *server) { - if (server->fscache && (server->options & NFS_OPTION_FSCACHE)) + if (server->fscache) return "yes"; return "no "; } diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 628631e2e34f..703f595dce90 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2260,6 +2260,7 @@ nfs_compare_remount_data(struct nfs_server *nfss, data->acdirmin != nfss->acdirmin / HZ || data->acdirmax != nfss->acdirmax / HZ || data->timeo != (10U * nfss->client->cl_timeout->to_initval / HZ) || + (data->options & NFS_OPTION_FSCACHE) != (nfss->options & NFS_OPTION_FSCACHE) || data->nfs_server.port != nfss->port || data->nfs_server.addrlen != nfss->nfs_client->cl_addrlen || !rpc_cmp_addr((struct sockaddr *)&data->nfs_server.address, -- cgit From 247bc9470b1eeefc7b58cdf2c39f2866ba651509 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 23 Jul 2019 22:14:29 -0500 Subject: cifs: fix rmmod regression in cifs.ko caused by force_sig changes Fixes: 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig") The global change from force_sig caused module unloading of cifs.ko to fail (since the cifsd process could not be killed, "rmmod cifs" now would always fail) Signed-off-by: Steve French Reviewed-by: Ronnie Sahlberg CC: Eric W. Biederman --- fs/cifs/connect.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index a4830ced0f98..a15a6e738eb5 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1113,6 +1113,7 @@ cifs_demultiplex_thread(void *p) mempool_resize(cifs_req_poolp, length + cifs_min_rcv); set_freezable(); + allow_signal(SIGKILL); while (server->tcpStatus != CifsExiting) { if (try_to_freeze()) continue; -- cgit From 0584674d7fe407c2db91a009294d5ec19f7cb1d5 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 4 Jul 2019 10:45:34 +0000 Subject: drm/i915: fix possible memory leak in intel_hdcp_auth_downstream() 'ksv_fifo' is malloced in intel_hdcp_auth_downstream() and should be freed before leaving from the error handling cases, otherwise it will cause memory leak. Fixes: f26ae6a652f2 ("drm/i915: SRM revocation check for HDCP1.4 and 2.2") Signed-off-by: Wei Yongjun Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20190704104534.12508-1-weiyongjun1@huawei.com (cherry picked from commit de70fdd7d24cd07e51fbec420f8704d956a47949) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/intel_hdcp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c index bc3a94d491c4..27bd7276a82d 100644 --- a/drivers/gpu/drm/i915/display/intel_hdcp.c +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c @@ -536,7 +536,8 @@ int intel_hdcp_auth_downstream(struct intel_connector *connector) if (drm_hdcp_check_ksvs_revoked(dev, ksv_fifo, num_downstream)) { DRM_ERROR("Revoked Ksv(s) in ksv_fifo\n"); - return -EPERM; + ret = -EPERM; + goto err; } /* -- cgit From 73a0ff0b30af79bf0303d557eb82f1d1945bb6ee Mon Sep 17 00:00:00 2001 From: Stanislav Lisovskiy Date: Fri, 12 Jul 2019 11:19:38 +0300 Subject: drm/i915: Fix wrong escape clock divisor init for GLK According to Bspec clock divisor registers in GeminiLake should be initialized by shifting 1(<<) to amount of correspondent divisor. While i915 was writing all this time that value as is. Surprisingly that it by accident worked, until we met some issues with Microtech Etab. v2: Added Fixes tag and cc v3: Added stable to cc as well. Signed-off-by: Stanislav Lisovskiy Reviewed-by: Vandita Kulkarni Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108826 Fixes: bcc657004841 ("drm/i915/glk: Program txesc clock divider for GLK") Cc: Deepak M Cc: Madhav Chauhan Cc: Jani Nikula Cc: Jani Nikula Cc: Joonas Lahtinen Cc: Rodrigo Vivi Cc: intel-gfx@lists.freedesktop.org Cc: stable@vger.kernel.org Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20190712081938.14185-1-stanislav.lisovskiy@intel.com (cherry picked from commit ce52ad5dd52cfaf3398058384e0ff94134bbd89c) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/display/vlv_dsi_pll.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/display/vlv_dsi_pll.c b/drivers/gpu/drm/i915/display/vlv_dsi_pll.c index 99cc3e2e9c2c..f016a776a39e 100644 --- a/drivers/gpu/drm/i915/display/vlv_dsi_pll.c +++ b/drivers/gpu/drm/i915/display/vlv_dsi_pll.c @@ -396,8 +396,8 @@ static void glk_dsi_program_esc_clock(struct drm_device *dev, else txesc2_div = 10; - I915_WRITE(MIPIO_TXESC_CLK_DIV1, txesc1_div & GLK_TX_ESC_CLK_DIV1_MASK); - I915_WRITE(MIPIO_TXESC_CLK_DIV2, txesc2_div & GLK_TX_ESC_CLK_DIV2_MASK); + I915_WRITE(MIPIO_TXESC_CLK_DIV1, (1 << (txesc1_div - 1)) & GLK_TX_ESC_CLK_DIV1_MASK); + I915_WRITE(MIPIO_TXESC_CLK_DIV2, (1 << (txesc2_div - 1)) & GLK_TX_ESC_CLK_DIV2_MASK); } /* Program BXT Mipi clocks and dividers */ -- cgit From 6fb08f1a5f7e5cdde1ce00104788e602f4299b99 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 29 Jul 2019 17:50:36 +0200 Subject: HID: logitech-dj: Really fix return value of logi_dj_recv_query_hidpp_devices Commit dbcbabf7da92 ("HID: logitech-dj: fix return value of logi_dj_recv_query_hidpp_devices") made logi_dj_recv_query_hidpp_devices return the return value of hid_hw_raw_request instead of unconditionally returning 0. But hid_hw_raw_request returns the report-size on a successful request (and a negative error-code on failure) where as the callers of logi_dj_recv_query_hidpp_devices expect a 0 return on success. This commit fixes things so that either the negative error gets returned or 0 on success, fixing HID++ receivers such as the Logitech nano receivers no longer working. Cc: YueHaibing Cc: Rafael J. Wysocki Cc: Lionel Landwerlin Fixes: dbcbabf7da92 ("HID: logitech-dj: fix return value of logi_dj_recv_query_hidpp_devices") Reported-by: Lionel Landwerlin Reported-by: Rafael J. Wysocki Signed-off-by: Hans de Goede Tested-by: Rafael J. Wysocki Reviewed-by: Petr Vorel Tested-by: Petr Vorel Reviewed-by: YueHaibing Signed-off-by: Jiri Kosina --- drivers/hid/hid-logitech-dj.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index d5b47ec1510c..cc47f948c1d0 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -1125,7 +1125,7 @@ static int logi_dj_recv_query_hidpp_devices(struct dj_receiver_dev *djrcv_dev) HID_REQ_SET_REPORT); kfree(hidpp_report); - return retval; + return (retval < 0) ? retval : 0; } static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) -- cgit From a48d06f9b7cedbb8ad7804d1720168b7ee6a34e7 Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Thu, 1 Aug 2019 11:30:13 +0800 Subject: KVM: LAPIC: Don't need to wakeup vCPU twice afer timer fire MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit kvm_set_pending_timer() will take care to wake up the sleeping vCPU which has pending timer, don't need to check this in apic_timer_expired() again. Cc: Paolo Bonzini Cc: Radim Krčmář Signed-off-by: Wanpeng Li Signed-off-by: Paolo Bonzini --- arch/x86/kvm/lapic.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 0aa158657f20..685d17c11461 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -1548,7 +1548,6 @@ static void kvm_apic_inject_pending_timer_irqs(struct kvm_lapic *apic) static void apic_timer_expired(struct kvm_lapic *apic) { struct kvm_vcpu *vcpu = apic->vcpu; - struct swait_queue_head *q = &vcpu->wq; struct kvm_timer *ktimer = &apic->lapic_timer; if (atomic_read(&apic->lapic_timer.pending)) @@ -1566,13 +1565,6 @@ static void apic_timer_expired(struct kvm_lapic *apic) atomic_inc(&apic->lapic_timer.pending); kvm_set_pending_timer(vcpu); - - /* - * For x86, the atomic_inc() is serialized, thus - * using swait_active() is safe. - */ - if (swait_active(q)) - swake_up_one(q); } static void start_sw_tscdeadline(struct kvm_lapic *apic) -- cgit From 046ddeed0461b5d270470c253cbb321103d048b6 Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Thu, 1 Aug 2019 11:30:14 +0800 Subject: KVM: Check preempted_in_kernel for involuntary preemption MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit preempted_in_kernel is updated in preempt_notifier when involuntary preemption ocurrs, it can be stale when the voluntarily preempted vCPUs are taken into account by kvm_vcpu_on_spin() loop. This patch lets it just check preempted_in_kernel for involuntary preemption. Cc: Paolo Bonzini Cc: Radim Krčmář Signed-off-by: Wanpeng Li Signed-off-by: Paolo Bonzini --- virt/kvm/kvm_main.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 887f3b0c2b60..ed061d8a457c 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -2508,7 +2508,8 @@ void kvm_vcpu_on_spin(struct kvm_vcpu *me, bool yield_to_kernel_mode) continue; if (swait_active(&vcpu->wq) && !kvm_arch_vcpu_runnable(vcpu)) continue; - if (yield_to_kernel_mode && !kvm_arch_vcpu_in_kernel(vcpu)) + if (READ_ONCE(vcpu->preempted) && yield_to_kernel_mode && + !kvm_arch_vcpu_in_kernel(vcpu)) continue; if (!kvm_vcpu_eligible_for_directed_yield(vcpu)) continue; @@ -4205,7 +4206,7 @@ static void kvm_sched_in(struct preempt_notifier *pn, int cpu) { struct kvm_vcpu *vcpu = preempt_notifier_to_vcpu(pn); - vcpu->preempted = false; + WRITE_ONCE(vcpu->preempted, false); WRITE_ONCE(vcpu->ready, false); kvm_arch_sched_in(vcpu, cpu); @@ -4219,7 +4220,7 @@ static void kvm_sched_out(struct preempt_notifier *pn, struct kvm_vcpu *vcpu = preempt_notifier_to_vcpu(pn); if (current->state == TASK_RUNNING) { - vcpu->preempted = true; + WRITE_ONCE(vcpu->preempted, true); WRITE_ONCE(vcpu->ready, true); } kvm_arch_vcpu_put(vcpu); -- cgit From 17e433b54393a6269acbcb792da97791fe1592d8 Mon Sep 17 00:00:00 2001 From: Wanpeng Li Date: Mon, 5 Aug 2019 10:03:19 +0800 Subject: KVM: Fix leak vCPU's VMCS value into other pCPU MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After commit d73eb57b80b (KVM: Boost vCPUs that are delivering interrupts), a five years old bug is exposed. Running ebizzy benchmark in three 80 vCPUs VMs on one 80 pCPUs Skylake server, a lot of rcu_sched stall warning splatting in the VMs after stress testing: INFO: rcu_sched detected stalls on CPUs/tasks: { 4 41 57 62 77} (detected by 15, t=60004 jiffies, g=899, c=898, q=15073) Call Trace: flush_tlb_mm_range+0x68/0x140 tlb_flush_mmu.part.75+0x37/0xe0 tlb_finish_mmu+0x55/0x60 zap_page_range+0x142/0x190 SyS_madvise+0x3cd/0x9c0 system_call_fastpath+0x1c/0x21 swait_active() sustains to be true before finish_swait() is called in kvm_vcpu_block(), voluntarily preempted vCPUs are taken into account by kvm_vcpu_on_spin() loop greatly increases the probability condition kvm_arch_vcpu_runnable(vcpu) is checked and can be true, when APICv is enabled the yield-candidate vCPU's VMCS RVI field leaks(by vmx_sync_pir_to_irr()) into spinning-on-a-taken-lock vCPU's current VMCS. This patch fixes it by checking conservatively a subset of events. Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Christian Borntraeger Cc: Marc Zyngier Cc: stable@vger.kernel.org Fixes: 98f4a1467 (KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop) Signed-off-by: Wanpeng Li Signed-off-by: Paolo Bonzini --- arch/powerpc/kvm/powerpc.c | 5 +++++ arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/svm.c | 6 ++++++ arch/x86/kvm/vmx/vmx.c | 6 ++++++ arch/x86/kvm/x86.c | 16 ++++++++++++++++ include/linux/kvm_host.h | 1 + virt/kvm/kvm_main.c | 25 ++++++++++++++++++++++++- 7 files changed, 59 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index 0dba7eb24f92..3e34d5fa6708 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -50,6 +50,11 @@ int kvm_arch_vcpu_runnable(struct kvm_vcpu *v) return !!(v->arch.pending_exceptions) || kvm_request_pending(v); } +bool kvm_arch_dy_runnable(struct kvm_vcpu *vcpu) +{ + return kvm_arch_vcpu_runnable(vcpu); +} + bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu) { return false; diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index e74f0711eaaf..fc046ca89d32 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -1175,6 +1175,7 @@ struct kvm_x86_ops { int (*update_pi_irte)(struct kvm *kvm, unsigned int host_irq, uint32_t guest_irq, bool set); void (*apicv_post_state_restore)(struct kvm_vcpu *vcpu); + bool (*dy_apicv_has_pending_interrupt)(struct kvm_vcpu *vcpu); int (*set_hv_timer)(struct kvm_vcpu *vcpu, u64 guest_deadline_tsc, bool *expired); diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 7eafc6907861..d685491fce4d 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -5190,6 +5190,11 @@ static void svm_deliver_avic_intr(struct kvm_vcpu *vcpu, int vec) kvm_vcpu_wake_up(vcpu); } +static bool svm_dy_apicv_has_pending_interrupt(struct kvm_vcpu *vcpu) +{ + return false; +} + static void svm_ir_list_del(struct vcpu_svm *svm, struct amd_iommu_pi_data *pi) { unsigned long flags; @@ -7314,6 +7319,7 @@ static struct kvm_x86_ops svm_x86_ops __ro_after_init = { .pmu_ops = &amd_pmu_ops, .deliver_posted_interrupt = svm_deliver_avic_intr, + .dy_apicv_has_pending_interrupt = svm_dy_apicv_has_pending_interrupt, .update_pi_irte = svm_update_pi_irte, .setup_mce = svm_setup_mce, diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 074385c86c09..42ed3faa6af8 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -6117,6 +6117,11 @@ static int vmx_sync_pir_to_irr(struct kvm_vcpu *vcpu) return max_irr; } +static bool vmx_dy_apicv_has_pending_interrupt(struct kvm_vcpu *vcpu) +{ + return pi_test_on(vcpu_to_pi_desc(vcpu)); +} + static void vmx_load_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap) { if (!kvm_vcpu_apicv_active(vcpu)) @@ -7726,6 +7731,7 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = { .guest_apic_has_interrupt = vmx_guest_apic_has_interrupt, .sync_pir_to_irr = vmx_sync_pir_to_irr, .deliver_posted_interrupt = vmx_deliver_posted_interrupt, + .dy_apicv_has_pending_interrupt = vmx_dy_apicv_has_pending_interrupt, .set_tss_addr = vmx_set_tss_addr, .set_identity_map_addr = vmx_set_identity_map_addr, diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index c6d951cbd76c..93b0bd45ac73 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -9698,6 +9698,22 @@ int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu) return kvm_vcpu_running(vcpu) || kvm_vcpu_has_events(vcpu); } +bool kvm_arch_dy_runnable(struct kvm_vcpu *vcpu) +{ + if (READ_ONCE(vcpu->arch.pv.pv_unhalted)) + return true; + + if (kvm_test_request(KVM_REQ_NMI, vcpu) || + kvm_test_request(KVM_REQ_SMI, vcpu) || + kvm_test_request(KVM_REQ_EVENT, vcpu)) + return true; + + if (vcpu->arch.apicv_active && kvm_x86_ops->dy_apicv_has_pending_interrupt(vcpu)) + return true; + + return false; +} + bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu) { return vcpu->arch.preempted_in_kernel; diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 5c5b5867024c..9e4c2bb90297 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -872,6 +872,7 @@ int kvm_arch_check_processor_compat(void); int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu); bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu); int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu); +bool kvm_arch_dy_runnable(struct kvm_vcpu *vcpu); #ifndef __KVM_HAVE_ARCH_VM_ALLOC /* diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index ed061d8a457c..1f05aeb9da27 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -2477,6 +2477,29 @@ static bool kvm_vcpu_eligible_for_directed_yield(struct kvm_vcpu *vcpu) #endif } +/* + * Unlike kvm_arch_vcpu_runnable, this function is called outside + * a vcpu_load/vcpu_put pair. However, for most architectures + * kvm_arch_vcpu_runnable does not require vcpu_load. + */ +bool __weak kvm_arch_dy_runnable(struct kvm_vcpu *vcpu) +{ + return kvm_arch_vcpu_runnable(vcpu); +} + +static bool vcpu_dy_runnable(struct kvm_vcpu *vcpu) +{ + if (kvm_arch_dy_runnable(vcpu)) + return true; + +#ifdef CONFIG_KVM_ASYNC_PF + if (!list_empty_careful(&vcpu->async_pf.done)) + return true; +#endif + + return false; +} + void kvm_vcpu_on_spin(struct kvm_vcpu *me, bool yield_to_kernel_mode) { struct kvm *kvm = me->kvm; @@ -2506,7 +2529,7 @@ void kvm_vcpu_on_spin(struct kvm_vcpu *me, bool yield_to_kernel_mode) continue; if (vcpu == me) continue; - if (swait_active(&vcpu->wq) && !kvm_arch_vcpu_runnable(vcpu)) + if (swait_active(&vcpu->wq) && !vcpu_dy_runnable(vcpu)) continue; if (READ_ONCE(vcpu->preempted) && yield_to_kernel_mode && !kvm_arch_vcpu_in_kernel(vcpu)) -- cgit From 741cbbae0768b828be2d48331eb371a4f08bbea8 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Sat, 3 Aug 2019 08:14:25 +0200 Subject: KVM: remove kvm_arch_has_vcpu_debugfs() There is no need for this function as all arches have to implement kvm_arch_create_vcpu_debugfs() no matter what. A #define symbol let us actually simplify the code. Signed-off-by: Paolo Bonzini --- arch/mips/kvm/mips.c | 10 ---------- arch/powerpc/kvm/powerpc.c | 10 ---------- arch/s390/kvm/kvm-s390.c | 10 ---------- arch/x86/include/asm/kvm_host.h | 2 ++ arch/x86/kvm/debugfs.c | 5 ----- include/linux/kvm_host.h | 3 ++- virt/kvm/arm/arm.c | 5 ----- virt/kvm/kvm_main.c | 5 ++--- 8 files changed, 6 insertions(+), 44 deletions(-) diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c index 2cfe839f0b3a..1109924560d8 100644 --- a/arch/mips/kvm/mips.c +++ b/arch/mips/kvm/mips.c @@ -150,16 +150,6 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) return 0; } -bool kvm_arch_has_vcpu_debugfs(void) -{ - return false; -} - -int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu) -{ - return 0; -} - void kvm_mips_free_vcpus(struct kvm *kvm) { unsigned int i; diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index 3e34d5fa6708..3e566c2e6066 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -457,16 +457,6 @@ err_out: return -EINVAL; } -bool kvm_arch_has_vcpu_debugfs(void) -{ - return false; -} - -int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu) -{ - return 0; -} - void kvm_arch_destroy_vm(struct kvm *kvm) { unsigned int i; diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 3f520cd837fb..f329dcb3f44c 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -2516,16 +2516,6 @@ out_err: return rc; } -bool kvm_arch_has_vcpu_debugfs(void) -{ - return false; -} - -int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu) -{ - return 0; -} - void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu) { VCPU_EVENT(vcpu, 3, "%s", "free cpu"); diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index fc046ca89d32..e92725b2a46f 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -35,6 +35,8 @@ #include #include +#define __KVM_HAVE_ARCH_VCPU_DEBUGFS + #define KVM_MAX_VCPUS 288 #define KVM_SOFT_MAX_VCPUS 240 #define KVM_MAX_VCPU_ID 1023 diff --git a/arch/x86/kvm/debugfs.c b/arch/x86/kvm/debugfs.c index 329361b69d5e..9bd93e0d5f63 100644 --- a/arch/x86/kvm/debugfs.c +++ b/arch/x86/kvm/debugfs.c @@ -8,11 +8,6 @@ #include #include "lapic.h" -bool kvm_arch_has_vcpu_debugfs(void) -{ - return true; -} - static int vcpu_get_timer_advance_ns(void *data, u64 *val) { struct kvm_vcpu *vcpu = (struct kvm_vcpu *) data; diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 9e4c2bb90297..8d34db3c8bc6 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -861,8 +861,9 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu); void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu); void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu); -bool kvm_arch_has_vcpu_debugfs(void); +#ifdef __KVM_HAVE_ARCH_VCPU_DEBUGFS int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu); +#endif int kvm_arch_hardware_enable(void); void kvm_arch_hardware_disable(void); diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c index acc43242a310..13f5a1aa6d79 100644 --- a/virt/kvm/arm/arm.c +++ b/virt/kvm/arm/arm.c @@ -144,11 +144,6 @@ out_fail_alloc: return ret; } -bool kvm_arch_has_vcpu_debugfs(void) -{ - return false; -} - int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu) { return 0; diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 1f05aeb9da27..4afb1a234018 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -2617,12 +2617,10 @@ static int create_vcpu_fd(struct kvm_vcpu *vcpu) static int kvm_create_vcpu_debugfs(struct kvm_vcpu *vcpu) { +#ifdef __KVM_HAVE_ARCH_VCPU_DEBUGFS char dir_name[ITOA_MAX_LEN * 2]; int ret; - if (!kvm_arch_has_vcpu_debugfs()) - return 0; - if (!debugfs_initialized()) return 0; @@ -2637,6 +2635,7 @@ static int kvm_create_vcpu_debugfs(struct kvm_vcpu *vcpu) debugfs_remove_recursive(vcpu->debugfs_dentry); return ret; } +#endif return 0; } -- cgit From 3e7093d045196b1016517631645e874fe903db7e Mon Sep 17 00:00:00 2001 From: Greg KH Date: Wed, 31 Jul 2019 20:56:20 +0200 Subject: KVM: no need to check return value of debugfs_create functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Also, when doing this, change kvm_arch_create_vcpu_debugfs() to return void instead of an integer, as we should not care at all about if this function actually does anything or not. Cc: Paolo Bonzini Cc: "Radim Krčmář" Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Borislav Petkov Cc: "H. Peter Anvin" Cc: Cc: Signed-off-by: Greg Kroah-Hartman Signed-off-by: Paolo Bonzini --- arch/x86/kvm/debugfs.c | 41 +++++++++++++---------------------------- include/linux/kvm_host.h | 2 +- virt/kvm/kvm_main.c | 21 +++++---------------- 3 files changed, 19 insertions(+), 45 deletions(-) diff --git a/arch/x86/kvm/debugfs.c b/arch/x86/kvm/debugfs.c index 9bd93e0d5f63..018aebce33ff 100644 --- a/arch/x86/kvm/debugfs.c +++ b/arch/x86/kvm/debugfs.c @@ -43,37 +43,22 @@ static int vcpu_get_tsc_scaling_frac_bits(void *data, u64 *val) DEFINE_SIMPLE_ATTRIBUTE(vcpu_tsc_scaling_frac_fops, vcpu_get_tsc_scaling_frac_bits, NULL, "%llu\n"); -int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu) +void kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu) { - struct dentry *ret; + debugfs_create_file("tsc-offset", 0444, vcpu->debugfs_dentry, vcpu, + &vcpu_tsc_offset_fops); - ret = debugfs_create_file("tsc-offset", 0444, - vcpu->debugfs_dentry, - vcpu, &vcpu_tsc_offset_fops); - if (!ret) - return -ENOMEM; - - if (lapic_in_kernel(vcpu)) { - ret = debugfs_create_file("lapic_timer_advance_ns", 0444, - vcpu->debugfs_dentry, - vcpu, &vcpu_timer_advance_ns_fops); - if (!ret) - return -ENOMEM; - } + if (lapic_in_kernel(vcpu)) + debugfs_create_file("lapic_timer_advance_ns", 0444, + vcpu->debugfs_dentry, vcpu, + &vcpu_timer_advance_ns_fops); if (kvm_has_tsc_control) { - ret = debugfs_create_file("tsc-scaling-ratio", 0444, - vcpu->debugfs_dentry, - vcpu, &vcpu_tsc_scaling_fops); - if (!ret) - return -ENOMEM; - ret = debugfs_create_file("tsc-scaling-ratio-frac-bits", 0444, - vcpu->debugfs_dentry, - vcpu, &vcpu_tsc_scaling_frac_fops); - if (!ret) - return -ENOMEM; - + debugfs_create_file("tsc-scaling-ratio", 0444, + vcpu->debugfs_dentry, vcpu, + &vcpu_tsc_scaling_fops); + debugfs_create_file("tsc-scaling-ratio-frac-bits", 0444, + vcpu->debugfs_dentry, vcpu, + &vcpu_tsc_scaling_frac_fops); } - - return 0; } diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 8d34db3c8bc6..fcb46b3374c6 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -862,7 +862,7 @@ void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu); void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu); #ifdef __KVM_HAVE_ARCH_VCPU_DEBUGFS -int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu); +void kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu); #endif int kvm_arch_hardware_enable(void); diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 4afb1a234018..4feceaa03fb1 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -2615,29 +2615,20 @@ static int create_vcpu_fd(struct kvm_vcpu *vcpu) return anon_inode_getfd(name, &kvm_vcpu_fops, vcpu, O_RDWR | O_CLOEXEC); } -static int kvm_create_vcpu_debugfs(struct kvm_vcpu *vcpu) +static void kvm_create_vcpu_debugfs(struct kvm_vcpu *vcpu) { #ifdef __KVM_HAVE_ARCH_VCPU_DEBUGFS char dir_name[ITOA_MAX_LEN * 2]; - int ret; if (!debugfs_initialized()) - return 0; + return; snprintf(dir_name, sizeof(dir_name), "vcpu%d", vcpu->vcpu_id); vcpu->debugfs_dentry = debugfs_create_dir(dir_name, - vcpu->kvm->debugfs_dentry); - if (!vcpu->debugfs_dentry) - return -ENOMEM; + vcpu->kvm->debugfs_dentry); - ret = kvm_arch_create_vcpu_debugfs(vcpu); - if (ret < 0) { - debugfs_remove_recursive(vcpu->debugfs_dentry); - return ret; - } + kvm_arch_create_vcpu_debugfs(vcpu); #endif - - return 0; } /* @@ -2672,9 +2663,7 @@ static int kvm_vm_ioctl_create_vcpu(struct kvm *kvm, u32 id) if (r) goto vcpu_destroy; - r = kvm_create_vcpu_debugfs(vcpu); - if (r) - goto vcpu_destroy; + kvm_create_vcpu_debugfs(vcpu); mutex_lock(&kvm->lock); if (kvm_get_vcpu_by_id(kvm, id)) { -- cgit From 57b76bdb20ecb05c87f4e12b7ced66bc03a976c3 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 25 Jul 2019 12:59:40 +0200 Subject: x86: kvm: remove useless calls to kvm_para_available Most code in arch/x86/kernel/kvm.c is called through x86_hyper_kvm, and thus only runs if KVM has been detected. There is no need to check again for the CPUID base. Cc: Sergio Lopez Cc: Jan Kiszka Signed-off-by: Paolo Bonzini --- arch/x86/kernel/kvm.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index 82caf01b63dd..edd2179ad2da 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -308,9 +308,6 @@ static notrace void kvm_guest_apic_eoi_write(u32 reg, u32 val) static void kvm_guest_cpu_init(void) { - if (!kvm_para_available()) - return; - if (kvm_para_has_feature(KVM_FEATURE_ASYNC_PF) && kvmapf) { u64 pa = slow_virt_to_phys(this_cpu_ptr(&apf_reason)); @@ -625,9 +622,6 @@ static void __init kvm_guest_init(void) { int i; - if (!kvm_para_available()) - return; - paravirt_ops_setup(); register_reboot_notifier(&kvm_pv_reboot_nb); for (i = 0; i < KVM_TASK_SLEEP_HASHSIZE; i++) @@ -847,8 +841,6 @@ asm( */ void __init kvm_spinlock_init(void) { - if (!kvm_para_available()) - return; /* Does host kernel support KVM_FEATURE_PV_UNHALT? */ if (!kvm_para_has_feature(KVM_FEATURE_PV_UNHALT)) return; -- cgit From 7bc74853fd61432ec59f812a40425bf6d8c986a4 Mon Sep 17 00:00:00 2001 From: István Váradi Date: Wed, 24 Jul 2019 20:09:18 +0200 Subject: HID: quirks: Set the INCREMENT_USAGE_ON_DUPLICATE quirk on Saitek X52 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Saitek X52 joystick has a pair of axes that are originally (by the Windows driver) used as mouse pointer controls. The corresponding usage->hid values are 0x50024 and 0x50026. Thus they are handled as unknown axes and both get mapped to ABS_MISC. The quirk makes the second axis to be mapped to ABS_MISC1 and thus made available separately. [jkosina@suse.cz: squashed two patches into one] Signed-off-by: István Váradi Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 884356feb016..31e9782f234e 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -990,6 +990,7 @@ #define USB_DEVICE_ID_SAITEK_RAT7 0x0cd7 #define USB_DEVICE_ID_SAITEK_RAT9 0x0cfa #define USB_DEVICE_ID_SAITEK_MMO7 0x0cd0 +#define USB_DEVICE_ID_SAITEK_X52 0x075c #define USB_VENDOR_ID_SAMSUNG 0x0419 #define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 1549c7a2f04c..73eb7ea7e76c 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -140,6 +140,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_RETROUSB, USB_DEVICE_ID_RETROUSB_SNES_RETROPAD), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, { HID_USB_DEVICE(USB_VENDOR_ID_RETROUSB, USB_DEVICE_ID_RETROUSB_SNES_RETROPORT), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_RUMBLEPAD), HID_QUIRK_BADPAD }, + { HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_X52), HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE }, { HID_USB_DEVICE(USB_VENDOR_ID_SEMICO, USB_DEVICE_ID_SEMICO_USB_KEYKOARD2), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_SEMICO, USB_DEVICE_ID_SEMICO_USB_KEYKOARD), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB), HID_QUIRK_NOGET }, -- cgit From 693c3dab4e50403f91bca4b52fc6d8562a3180f6 Mon Sep 17 00:00:00 2001 From: Aaron Armstrong Skomra Date: Tue, 23 Jul 2019 11:09:15 -0700 Subject: HID: wacom: fix bit shift for Cintiq Companion 2 The bit indicating BTN_6 on this device is overshifted by 2 bits, resulting in the incorrect button being reported. Also fix copy-paste mistake in comments. Signed-off-by: Aaron Armstrong Skomra Reviewed-by: Ping Cheng Link: https://github.com/linuxwacom/xf86-input-wacom/issues/71 Fixes: c7f0522a1ad1 ("HID: wacom: Slim down wacom_intuos_pad processing") Cc: # v4.5+ Signed-off-by: Jiri Kosina --- drivers/hid/wacom_wac.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 8fc36a28081b..7a8ddc999a8e 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -533,14 +533,14 @@ static int wacom_intuos_pad(struct wacom_wac *wacom) */ buttons = (data[4] << 1) | (data[3] & 0x01); } else if (features->type == CINTIQ_COMPANION_2) { - /* d-pad right -> data[4] & 0x10 - * d-pad up -> data[4] & 0x20 - * d-pad left -> data[4] & 0x40 - * d-pad down -> data[4] & 0x80 - * d-pad center -> data[3] & 0x01 + /* d-pad right -> data[2] & 0x10 + * d-pad up -> data[2] & 0x20 + * d-pad left -> data[2] & 0x40 + * d-pad down -> data[2] & 0x80 + * d-pad center -> data[1] & 0x01 */ buttons = ((data[2] >> 4) << 7) | - ((data[1] & 0x04) << 6) | + ((data[1] & 0x04) << 4) | ((data[2] & 0x0F) << 2) | (data[1] & 0x03); } else if (features->type >= INTUOS5S && features->type <= INTUOSPL) { -- cgit From 01ec0a5f19c8c82960a07f6c7410fc9e01d7fb51 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 25 Jul 2019 15:13:33 +0200 Subject: HID: holtek: test for sanity of intfdata The ioctl handler uses the intfdata of a second interface, which may not be present in a broken or malicious device, hence the intfdata needs to be checked for NULL. [jkosina@suse.cz: fix newly added spurious space] Reported-by: syzbot+965152643a75a56737be@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Signed-off-by: Jiri Kosina --- drivers/hid/hid-holtek-kbd.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-holtek-kbd.c b/drivers/hid/hid-holtek-kbd.c index b3d502421b79..0a38e8e9bc78 100644 --- a/drivers/hid/hid-holtek-kbd.c +++ b/drivers/hid/hid-holtek-kbd.c @@ -123,9 +123,14 @@ static int holtek_kbd_input_event(struct input_dev *dev, unsigned int type, /* Locate the boot interface, to receive the LED change events */ struct usb_interface *boot_interface = usb_ifnum_to_if(usb_dev, 0); + struct hid_device *boot_hid; + struct hid_input *boot_hid_input; - struct hid_device *boot_hid = usb_get_intfdata(boot_interface); - struct hid_input *boot_hid_input = list_first_entry(&boot_hid->inputs, + if (unlikely(boot_interface == NULL)) + return -ENODEV; + + boot_hid = usb_get_intfdata(boot_interface); + boot_hid_input = list_first_entry(&boot_hid->inputs, struct hid_input, list); return boot_hid_input->input->event(boot_hid_input->input, type, code, -- cgit From 49869d2ea9eecc105a10724c1abf035151a3c4e2 Mon Sep 17 00:00:00 2001 From: Sebastian Parschauer Date: Wed, 24 Jul 2019 20:40:03 +0200 Subject: HID: Add quirk for HP X1200 PIXART OEM mouse The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for this one as well. Jonathan Teh (@jonathan-teh) reported and tested the quirk. Reference: https://github.com/sriemer/fix-linux-mouse/issues/15 Signed-off-by: Sebastian Parschauer CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 31e9782f234e..0a00be19f7a0 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -568,6 +568,7 @@ #define USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0B4A 0x0b4a #define USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE 0x134a #define USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_094A 0x094a +#define USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_0641 0x0641 #define USB_VENDOR_ID_HUION 0x256c #define USB_DEVICE_ID_HUION_TABLET 0x006e diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 73eb7ea7e76c..4fe2c3ab76f9 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -91,6 +91,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0B4A), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_094A), HID_QUIRK_ALWAYS_POLL }, + { HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_0641), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_IDEACOM, USB_DEVICE_ID_IDEACOM_IDC6680), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_INNOMEDIA, USB_DEVICE_ID_INNEX_GENESIS_ATARI), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X), HID_QUIRK_MULTI_INPUT }, -- cgit From 1c703b53e5bfb5c2205c30f0fb157ce271fd42fb Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Tue, 11 Jun 2019 14:13:20 +0200 Subject: HID: input: fix a4tech horizontal wheel custom usage Some a4tech mice use the 'GenericDesktop.00b8' usage to inform whether the previous wheel report was horizontal or vertical. Before c01908a14bf73 ("HID: input: add mapping for "Toggle Display" key") this usage was being mapped to 'Relative.Misc'. After the patch it's simply ignored (usage->type == 0 & usage->code == 0). Which ultimately makes hid-a4tech ignore the WHEEL/HWHEEL selection event, as it has no usage->type. We shouldn't rely on a mapping for that usage as it's nonstandard and doesn't really map to an input event. So we bypass the mapping and make sure the custom event handling properly handles both reports. Fixes: c01908a14bf73 ("HID: input: add mapping for "Toggle Display" key") Signed-off-by: Nicolas Saenz Julienne Signed-off-by: Jiri Kosina --- drivers/hid/hid-a4tech.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/drivers/hid/hid-a4tech.c b/drivers/hid/hid-a4tech.c index 98bf694626f7..3a8c4a5971f7 100644 --- a/drivers/hid/hid-a4tech.c +++ b/drivers/hid/hid-a4tech.c @@ -23,12 +23,36 @@ #define A4_2WHEEL_MOUSE_HACK_7 0x01 #define A4_2WHEEL_MOUSE_HACK_B8 0x02 +#define A4_WHEEL_ORIENTATION (HID_UP_GENDESK | 0x000000b8) + struct a4tech_sc { unsigned long quirks; unsigned int hw_wheel; __s32 delayed_value; }; +static int a4_input_mapping(struct hid_device *hdev, struct hid_input *hi, + struct hid_field *field, struct hid_usage *usage, + unsigned long **bit, int *max) +{ + struct a4tech_sc *a4 = hid_get_drvdata(hdev); + + if (a4->quirks & A4_2WHEEL_MOUSE_HACK_B8 && + usage->hid == A4_WHEEL_ORIENTATION) { + /* + * We do not want to have this usage mapped to anything as it's + * nonstandard and doesn't really behave like an HID report. + * It's only selecting the orientation (vertical/horizontal) of + * the previous mouse wheel report. The input_events will be + * generated once both reports are recorded in a4_event(). + */ + return -1; + } + + return 0; + +} + static int a4_input_mapped(struct hid_device *hdev, struct hid_input *hi, struct hid_field *field, struct hid_usage *usage, unsigned long **bit, int *max) @@ -52,8 +76,7 @@ static int a4_event(struct hid_device *hdev, struct hid_field *field, struct a4tech_sc *a4 = hid_get_drvdata(hdev); struct input_dev *input; - if (!(hdev->claimed & HID_CLAIMED_INPUT) || !field->hidinput || - !usage->type) + if (!(hdev->claimed & HID_CLAIMED_INPUT) || !field->hidinput) return 0; input = field->hidinput->input; @@ -64,7 +87,7 @@ static int a4_event(struct hid_device *hdev, struct hid_field *field, return 1; } - if (usage->hid == 0x000100b8) { + if (usage->hid == A4_WHEEL_ORIENTATION) { input_event(input, EV_REL, value ? REL_HWHEEL : REL_WHEEL, a4->delayed_value); input_event(input, EV_REL, value ? REL_HWHEEL_HI_RES : @@ -131,6 +154,7 @@ MODULE_DEVICE_TABLE(hid, a4_devices); static struct hid_driver a4_driver = { .name = "a4tech", .id_table = a4_devices, + .input_mapping = a4_input_mapping, .input_mapped = a4_input_mapped, .event = a4_event, .probe = a4_probe, -- cgit From f7ccbed656f78212593ca965d9a8f34bf24e0aab Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Fri, 2 Aug 2019 11:46:16 -0700 Subject: drm/rockchip: Suspend DP late In commit fe64ba5c6323 ("drm/rockchip: Resume DP early") we moved resume to be early but left suspend at its normal time. This seems like it could be OK, but casues problems if a suspend gets interrupted partway through. The OS only balances matching suspend/resume levels. ...so if suspend was called then resume will be called. If suspend late was called then resume early will be called. ...but if suspend was called resume early might not get called. This leads to an unbalance in the clock enables / disables. Lets take the simple fix and just move suspend to be late to match. This makes the PM core take proper care in keeping things balanced. Fixes: fe64ba5c6323 ("drm/rockchip: Resume DP early") Signed-off-by: Douglas Anderson Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20190802184616.44822-1-dianders@chromium.org --- drivers/gpu/drm/rockchip/analogix_dp-rockchip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c index 95e5c517a15f..9aae3d8e99ef 100644 --- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c +++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c @@ -432,7 +432,7 @@ static int rockchip_dp_resume(struct device *dev) static const struct dev_pm_ops rockchip_dp_pm_ops = { #ifdef CONFIG_PM_SLEEP - .suspend = rockchip_dp_suspend, + .suspend_late = rockchip_dp_suspend, .resume_early = rockchip_dp_resume, #endif }; -- cgit From 5eeaf10eec394b28fad2c58f1f5c3a5da0e87d1c Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 2 Aug 2019 10:28:32 +0100 Subject: KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block Since commit commit 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or its GICv2 equivalent) loaded as long as we can, only syncing it back when we're scheduled out. There is a small snag with that though: kvm_vgic_vcpu_pending_irq(), which is indirectly called from kvm_vcpu_check_block(), needs to evaluate the guest's view of ICC_PMR_EL1. At the point were we call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever changes to PMR is not visible in memory until we do a vcpu_put(). Things go really south if the guest does the following: mov x0, #0 // or any small value masking interrupts msr ICC_PMR_EL1, x0 [vcpu preempted, then rescheduled, VMCR sampled] mov x0, #ff // allow all interrupts msr ICC_PMR_EL1, x0 wfi // traps to EL2, so samping of VMCR [interrupt arrives just after WFI] Here, the hypervisor's view of PMR is zero, while the guest has enabled its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no interrupts are pending (despite an interrupt being received) and we'll block for no reason. If the guest doesn't have a periodic interrupt firing once it has blocked, it will stay there forever. To avoid this unfortuante situation, let's resync VMCR from kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block() will observe the latest value of PMR. This has been found by booting an arm64 Linux guest with the pseudo NMI feature, and thus using interrupt priorities to mask interrupts instead of the usual PSTATE masking. Cc: stable@vger.kernel.org # 4.12 Fixes: 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put") Signed-off-by: Marc Zyngier --- include/kvm/arm_vgic.h | 1 + virt/kvm/arm/arm.c | 11 +++++++++++ virt/kvm/arm/vgic/vgic-v2.c | 9 ++++++++- virt/kvm/arm/vgic/vgic-v3.c | 7 ++++++- virt/kvm/arm/vgic/vgic.c | 11 +++++++++++ virt/kvm/arm/vgic/vgic.h | 2 ++ 6 files changed, 39 insertions(+), 2 deletions(-) diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h index 46bbc949c20a..7a30524a80ee 100644 --- a/include/kvm/arm_vgic.h +++ b/include/kvm/arm_vgic.h @@ -350,6 +350,7 @@ int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu); void kvm_vgic_load(struct kvm_vcpu *vcpu); void kvm_vgic_put(struct kvm_vcpu *vcpu); +void kvm_vgic_vmcr_sync(struct kvm_vcpu *vcpu); #define irqchip_in_kernel(k) (!!((k)->arch.vgic.in_kernel)) #define vgic_initialized(k) ((k)->arch.vgic.initialized) diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c index c704fa696184..482b20256fa8 100644 --- a/virt/kvm/arm/arm.c +++ b/virt/kvm/arm/arm.c @@ -323,6 +323,17 @@ int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) void kvm_arch_vcpu_blocking(struct kvm_vcpu *vcpu) { + /* + * If we're about to block (most likely because we've just hit a + * WFI), we need to sync back the state of the GIC CPU interface + * so that we have the lastest PMR and group enables. This ensures + * that kvm_arch_vcpu_runnable has up-to-date data to decide + * whether we have pending interrupts. + */ + preempt_disable(); + kvm_vgic_vmcr_sync(vcpu); + preempt_enable(); + kvm_vgic_v4_enable_doorbell(vcpu); } diff --git a/virt/kvm/arm/vgic/vgic-v2.c b/virt/kvm/arm/vgic/vgic-v2.c index 6dd5ad706c92..96aab77d0471 100644 --- a/virt/kvm/arm/vgic/vgic-v2.c +++ b/virt/kvm/arm/vgic/vgic-v2.c @@ -484,10 +484,17 @@ void vgic_v2_load(struct kvm_vcpu *vcpu) kvm_vgic_global_state.vctrl_base + GICH_APR); } -void vgic_v2_put(struct kvm_vcpu *vcpu) +void vgic_v2_vmcr_sync(struct kvm_vcpu *vcpu) { struct vgic_v2_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v2; cpu_if->vgic_vmcr = readl_relaxed(kvm_vgic_global_state.vctrl_base + GICH_VMCR); +} + +void vgic_v2_put(struct kvm_vcpu *vcpu) +{ + struct vgic_v2_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v2; + + vgic_v2_vmcr_sync(vcpu); cpu_if->vgic_apr = readl_relaxed(kvm_vgic_global_state.vctrl_base + GICH_APR); } diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c index c2c9ce009f63..0c653a1e5215 100644 --- a/virt/kvm/arm/vgic/vgic-v3.c +++ b/virt/kvm/arm/vgic/vgic-v3.c @@ -662,12 +662,17 @@ void vgic_v3_load(struct kvm_vcpu *vcpu) __vgic_v3_activate_traps(vcpu); } -void vgic_v3_put(struct kvm_vcpu *vcpu) +void vgic_v3_vmcr_sync(struct kvm_vcpu *vcpu) { struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3; if (likely(cpu_if->vgic_sre)) cpu_if->vgic_vmcr = kvm_call_hyp_ret(__vgic_v3_read_vmcr); +} + +void vgic_v3_put(struct kvm_vcpu *vcpu) +{ + vgic_v3_vmcr_sync(vcpu); kvm_call_hyp(__vgic_v3_save_aprs, vcpu); diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c index 04786c8ec77e..13d4b38a94ec 100644 --- a/virt/kvm/arm/vgic/vgic.c +++ b/virt/kvm/arm/vgic/vgic.c @@ -919,6 +919,17 @@ void kvm_vgic_put(struct kvm_vcpu *vcpu) vgic_v3_put(vcpu); } +void kvm_vgic_vmcr_sync(struct kvm_vcpu *vcpu) +{ + if (unlikely(!irqchip_in_kernel(vcpu->kvm))) + return; + + if (kvm_vgic_global_state.type == VGIC_V2) + vgic_v2_vmcr_sync(vcpu); + else + vgic_v3_vmcr_sync(vcpu); +} + int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu) { struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu; diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h index 57205beaa981..11adbdac1d56 100644 --- a/virt/kvm/arm/vgic/vgic.h +++ b/virt/kvm/arm/vgic/vgic.h @@ -193,6 +193,7 @@ int vgic_register_dist_iodev(struct kvm *kvm, gpa_t dist_base_address, void vgic_v2_init_lrs(void); void vgic_v2_load(struct kvm_vcpu *vcpu); void vgic_v2_put(struct kvm_vcpu *vcpu); +void vgic_v2_vmcr_sync(struct kvm_vcpu *vcpu); void vgic_v2_save_state(struct kvm_vcpu *vcpu); void vgic_v2_restore_state(struct kvm_vcpu *vcpu); @@ -223,6 +224,7 @@ bool vgic_v3_check_base(struct kvm *kvm); void vgic_v3_load(struct kvm_vcpu *vcpu); void vgic_v3_put(struct kvm_vcpu *vcpu); +void vgic_v3_vmcr_sync(struct kvm_vcpu *vcpu); bool vgic_has_its(struct kvm *kvm); int kvm_vgic_register_its_device(void); -- cgit From fc05481b2fcabaaeccf63e32ac1baab54e5b6963 Mon Sep 17 00:00:00 2001 From: Suzuki K Poulose Date: Mon, 5 Aug 2019 12:15:28 +0100 Subject: usb: yurex: Fix use-after-free in yurex_delete syzbot reported the following crash [0]: BUG: KASAN: use-after-free in usb_free_coherent+0x79/0x80 drivers/usb/core/usb.c:928 Read of size 8 at addr ffff8881b18599c8 by task syz-executor.4/16007 CPU: 0 PID: 16007 Comm: syz-executor.4 Not tainted 5.3.0-rc2+ #23 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6a/0x32c mm/kasan/report.c:351 __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482 kasan_report+0xe/0x12 mm/kasan/common.c:612 usb_free_coherent+0x79/0x80 drivers/usb/core/usb.c:928 yurex_delete+0x138/0x330 drivers/usb/misc/yurex.c:100 kref_put include/linux/kref.h:65 [inline] yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392 __fput+0x2d7/0x840 fs/file_table.c:280 task_work_run+0x13f/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x413511 Code: 75 14 b8 03 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 04 1b 00 00 c3 48 83 ec 08 e8 0a fc ff ff 48 89 04 24 b8 03 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 53 fc ff ff 48 89 d0 48 83 c4 08 48 3d 01 RSP: 002b:00007ffc424ea2e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000007 RCX: 0000000000413511 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000006 RBP: 0000000000000001 R08: 0000000029a2fc22 R09: 0000000029a2fc26 R10: 00007ffc424ea3c0 R11: 0000000000000293 R12: 000000000075c9a0 R13: 000000000075c9a0 R14: 0000000000761938 R15: ffffffffffffffff Allocated by task 2776: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc mm/kasan/common.c:487 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:748 [inline] usb_alloc_dev+0x51/0xf95 drivers/usb/core/usb.c:583 hub_port_connect drivers/usb/core/hub.c:5004 [inline] hub_port_connect_change drivers/usb/core/hub.c:5213 [inline] port_event drivers/usb/core/hub.c:5359 [inline] hub_event+0x15c0/0x3640 drivers/usb/core/hub.c:5441 process_one_work+0x92b/0x1530 kernel/workqueue.c:2269 worker_thread+0x96/0xe20 kernel/workqueue.c:2415 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Freed by task 16007: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1470 [inline] slab_free mm/slub.c:3012 [inline] kfree+0xe4/0x2f0 mm/slub.c:3953 device_release+0x71/0x200 drivers/base/core.c:1064 kobject_cleanup lib/kobject.c:693 [inline] kobject_release lib/kobject.c:722 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x171/0x280 lib/kobject.c:739 put_device+0x1b/0x30 drivers/base/core.c:2213 usb_put_dev+0x1f/0x30 drivers/usb/core/usb.c:725 yurex_delete+0x40/0x330 drivers/usb/misc/yurex.c:95 kref_put include/linux/kref.h:65 [inline] yurex_release+0x66/0x90 drivers/usb/misc/yurex.c:392 __fput+0x2d7/0x840 fs/file_table.c:280 task_work_run+0x13f/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop+0x1d2/0x200 arch/x86/entry/common.c:163 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881b1859980 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 72 bytes inside of 2048-byte region [ffff8881b1859980, ffff8881b185a180) The buggy address belongs to the page: page:ffffea0006c61600 refcount:1 mapcount:0 mapping:ffff8881da00c000 index:0x0 compound_mapcount: 0 flags: 0x200000000010200(slab|head) raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da00c000 raw: 0000000000000000 00000000000f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881b1859880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881b1859900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc > ffff8881b1859980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881b1859a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881b1859a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== A quick look at the yurex_delete() shows that we drop the reference to the usb_device before releasing any buffers associated with the device. Delay the reference drop until we have finished the cleanup. [0] https://lore.kernel.org/lkml/0000000000003f86d8058f0bd671@google.com/ Fixes: 6bc235a2e24a5e ("USB: add driver for Meywa-Denki & Kayac YUREX") Cc: Jiri Kosina Cc: Tomoki Sekiyama Cc: Oliver Neukum Cc: andreyknvl@google.com Cc: gregkh@linuxfoundation.org Cc: Alan Stern Cc: syzkaller-bugs@googlegroups.com Cc: dtor@chromium.org Reported-by: syzbot+d1fedb1c1fdb07fca507@syzkaller.appspotmail.com Signed-off-by: Suzuki K Poulose Cc: stable Link: https://lore.kernel.org/r/20190805111528.6758-1-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/yurex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 7b306aa22d25..6715a128e6c8 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -92,7 +92,6 @@ static void yurex_delete(struct kref *kref) dev_dbg(&dev->interface->dev, "%s\n", __func__); - usb_put_dev(dev->udev); if (dev->cntl_urb) { usb_kill_urb(dev->cntl_urb); kfree(dev->cntl_req); @@ -108,6 +107,7 @@ static void yurex_delete(struct kref *kref) dev->int_buffer, dev->urb->transfer_dma); usb_free_urb(dev->urb); } + usb_put_dev(dev->udev); kfree(dev); } -- cgit From c43f28dfdc4654e738aa6d3fd08a105b2bee758d Mon Sep 17 00:00:00 2001 From: Gavin Li Date: Sun, 4 Aug 2019 16:50:44 -0700 Subject: usb: usbfs: fix double-free of usb memory upon submiturb error Upon an error within proc_do_submiturb(), dec_usb_memory_use_count() gets called once by the error handling tail and again by free_async(). Remove the first call. Signed-off-by: Gavin Li Acked-by: Alan Stern Cc: stable Link: https://lore.kernel.org/r/20190804235044.22327-1-gavinli@thegavinli.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index b265ab5405f9..9063ede411ae 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1812,8 +1812,6 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb return 0; error: - if (as && as->usbm) - dec_usb_memory_use_count(as->usbm, &as->usbm->urb_use_count); kfree(isopkt); kfree(dr); if (as) -- cgit From c3953a3c2d3175d2f9f0304c9a1ba89e7743c5e4 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 5 Aug 2019 12:00:55 +0200 Subject: NFC: nfcmrvl: fix gpio-handling regression Fix two reset-gpio sanity checks which were never converted to use gpio_is_valid(), and make sure to use -EINVAL to indicate a missing reset line also for the UART-driver module parameter and for the USB driver. This specifically prevents the UART and USB drivers from incidentally trying to request and use gpio 0, and also avoids triggering a WARN() in gpio_to_desc() during probe when no valid reset line has been specified. Fixes: e33a3f84f88f ("NFC: nfcmrvl: allow gpio 0 for reset signalling") Reported-by: syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com Tested-by: syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com Signed-off-by: Johan Hovold --- drivers/nfc/nfcmrvl/main.c | 4 ++-- drivers/nfc/nfcmrvl/uart.c | 4 ++-- drivers/nfc/nfcmrvl/usb.c | 1 + 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/nfc/nfcmrvl/main.c b/drivers/nfc/nfcmrvl/main.c index e65d027b91fa..529be35ac178 100644 --- a/drivers/nfc/nfcmrvl/main.c +++ b/drivers/nfc/nfcmrvl/main.c @@ -244,7 +244,7 @@ void nfcmrvl_chip_reset(struct nfcmrvl_private *priv) /* Reset possible fault of previous session */ clear_bit(NFCMRVL_PHY_ERROR, &priv->flags); - if (priv->config.reset_n_io) { + if (gpio_is_valid(priv->config.reset_n_io)) { nfc_info(priv->dev, "reset the chip\n"); gpio_set_value(priv->config.reset_n_io, 0); usleep_range(5000, 10000); @@ -255,7 +255,7 @@ void nfcmrvl_chip_reset(struct nfcmrvl_private *priv) void nfcmrvl_chip_halt(struct nfcmrvl_private *priv) { - if (priv->config.reset_n_io) + if (gpio_is_valid(priv->config.reset_n_io)) gpio_set_value(priv->config.reset_n_io, 0); } diff --git a/drivers/nfc/nfcmrvl/uart.c b/drivers/nfc/nfcmrvl/uart.c index 9a22056e8d9e..e5a622ce4b95 100644 --- a/drivers/nfc/nfcmrvl/uart.c +++ b/drivers/nfc/nfcmrvl/uart.c @@ -26,7 +26,7 @@ static unsigned int hci_muxed; static unsigned int flow_control; static unsigned int break_control; -static unsigned int reset_n_io; +static int reset_n_io = -EINVAL; /* ** NFCMRVL NCI OPS @@ -231,5 +231,5 @@ MODULE_PARM_DESC(break_control, "Tell if UART driver must drive break signal."); module_param(hci_muxed, uint, 0); MODULE_PARM_DESC(hci_muxed, "Tell if transport is muxed in HCI one."); -module_param(reset_n_io, uint, 0); +module_param(reset_n_io, int, 0); MODULE_PARM_DESC(reset_n_io, "GPIO that is wired to RESET_N signal."); diff --git a/drivers/nfc/nfcmrvl/usb.c b/drivers/nfc/nfcmrvl/usb.c index 945cc903d8f1..888e298f610b 100644 --- a/drivers/nfc/nfcmrvl/usb.c +++ b/drivers/nfc/nfcmrvl/usb.c @@ -305,6 +305,7 @@ static int nfcmrvl_probe(struct usb_interface *intf, /* No configuration for USB */ memset(&config, 0, sizeof(config)); + config.reset_n_io = -EINVAL; nfc_info(&udev->dev, "intf %p id %p\n", intf, id); -- cgit From 7fb5a711545d7d25fe9726a9ad277474dd83bd06 Mon Sep 17 00:00:00 2001 From: Hubert Feurstein Date: Wed, 31 Jul 2019 17:42:39 +0200 Subject: net: dsa: mv88e6xxx: drop adjust_link to enabled phylink We have to drop the adjust_link callback in order to finally migrate to phylink. Otherwise we get the following warning during startup: "mv88e6xxx 2188000.ethernet-1:10: Using legacy PHYLIB callbacks. Please migrate to PHYLINK!" The warning is generated in the function dsa_port_link_register_of in dsa/port.c: int dsa_port_link_register_of(struct dsa_port *dp) { struct dsa_switch *ds = dp->ds; if (!ds->ops->adjust_link) return dsa_port_phylink_register(dp); dev_warn(ds->dev, "Using legacy PHYLIB callbacks. Please migrate to PHYLINK!\n"); [...] } Signed-off-by: Hubert Feurstein Reviewed-by: Andrew Lunn Reviewed-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx/chip.c | 26 -------------------------- 1 file changed, 26 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index a0f288efcc12..d0a97eb73a37 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include @@ -482,30 +481,6 @@ static int mv88e6xxx_phy_is_internal(struct dsa_switch *ds, int port) return port < chip->info->num_internal_phys; } -/* We expect the switch to perform auto negotiation if there is a real - * phy. However, in the case of a fixed link phy, we force the port - * settings from the fixed link settings. - */ -static void mv88e6xxx_adjust_link(struct dsa_switch *ds, int port, - struct phy_device *phydev) -{ - struct mv88e6xxx_chip *chip = ds->priv; - int err; - - if (!phy_is_pseudo_fixed_link(phydev) && - mv88e6xxx_phy_is_internal(ds, port)) - return; - - mv88e6xxx_reg_lock(chip); - err = mv88e6xxx_port_setup_mac(chip, port, phydev->link, phydev->speed, - phydev->duplex, phydev->pause, - phydev->interface); - mv88e6xxx_reg_unlock(chip); - - if (err && err != -EOPNOTSUPP) - dev_err(ds->dev, "p%d: failed to configure MAC\n", port); -} - static void mv88e6065_phylink_validate(struct mv88e6xxx_chip *chip, int port, unsigned long *mask, struct phylink_link_state *state) @@ -4639,7 +4614,6 @@ static int mv88e6xxx_port_egress_floods(struct dsa_switch *ds, int port, static const struct dsa_switch_ops mv88e6xxx_switch_ops = { .get_tag_protocol = mv88e6xxx_get_tag_protocol, .setup = mv88e6xxx_setup, - .adjust_link = mv88e6xxx_adjust_link, .phylink_validate = mv88e6xxx_validate, .phylink_mac_link_state = mv88e6xxx_link_state, .phylink_mac_config = mv88e6xxx_mac_config, -- cgit From 7be8ef2cdbfe41a2e524b7c6cc3f8e6cfaa906e4 Mon Sep 17 00:00:00 2001 From: Dmytro Linkin Date: Thu, 1 Aug 2019 13:02:51 +0000 Subject: net: sched: use temporary variable for actions indexes Currently init call of all actions (except ipt) init their 'parm' structure as a direct pointer to nla data in skb. This leads to race condition when some of the filter actions were initialized successfully (and were assigned with idr action index that was written directly into nla data), but then were deleted and retried (due to following action module missing or classifier-initiated retry), in which case action init code tries to insert action to idr with index that was assigned on previous iteration. During retry the index can be reused by another action that was inserted concurrently, which causes unintended action sharing between filters. To fix described race condition, save action idr index to temporary stack-allocated variable instead on nla data. Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action") Signed-off-by: Dmytro Linkin Signed-off-by: Vlad Buslov Acked-by: Cong Wang Signed-off-by: David S. Miller --- net/sched/act_bpf.c | 9 +++++---- net/sched/act_connmark.c | 9 +++++---- net/sched/act_csum.c | 9 +++++---- net/sched/act_ct.c | 9 +++++---- net/sched/act_ctinfo.c | 9 +++++---- net/sched/act_gact.c | 8 +++++--- net/sched/act_ife.c | 8 +++++--- net/sched/act_mirred.c | 13 +++++++------ net/sched/act_mpls.c | 8 +++++--- net/sched/act_nat.c | 9 +++++---- net/sched/act_pedit.c | 10 ++++++---- net/sched/act_police.c | 8 +++++--- net/sched/act_sample.c | 10 +++++----- net/sched/act_simple.c | 10 ++++++---- net/sched/act_skbedit.c | 11 ++++++----- net/sched/act_skbmod.c | 11 ++++++----- net/sched/act_tunnel_key.c | 8 +++++--- net/sched/act_vlan.c | 16 +++++++++------- 18 files changed, 100 insertions(+), 75 deletions(-) diff --git a/net/sched/act_bpf.c b/net/sched/act_bpf.c index 8126b26f125e..fd1f7e799e23 100644 --- a/net/sched/act_bpf.c +++ b/net/sched/act_bpf.c @@ -285,6 +285,7 @@ static int tcf_bpf_init(struct net *net, struct nlattr *nla, struct tcf_bpf *prog; bool is_bpf, is_ebpf; int ret, res = 0; + u32 index; if (!nla) return -EINVAL; @@ -298,13 +299,13 @@ static int tcf_bpf_init(struct net *net, struct nlattr *nla, return -EINVAL; parm = nla_data(tb[TCA_ACT_BPF_PARMS]); - - ret = tcf_idr_check_alloc(tn, &parm->index, act, bind); + index = parm->index; + ret = tcf_idr_check_alloc(tn, &index, act, bind); if (!ret) { - ret = tcf_idr_create(tn, parm->index, est, act, + ret = tcf_idr_create(tn, index, est, act, &act_bpf_ops, bind, true); if (ret < 0) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return ret; } diff --git a/net/sched/act_connmark.c b/net/sched/act_connmark.c index ce36b0f7e1dc..32ac04d77a45 100644 --- a/net/sched/act_connmark.c +++ b/net/sched/act_connmark.c @@ -103,6 +103,7 @@ static int tcf_connmark_init(struct net *net, struct nlattr *nla, struct tcf_connmark_info *ci; struct tc_connmark *parm; int ret = 0, err; + u32 index; if (!nla) return -EINVAL; @@ -116,13 +117,13 @@ static int tcf_connmark_init(struct net *net, struct nlattr *nla, return -EINVAL; parm = nla_data(tb[TCA_CONNMARK_PARMS]); - - ret = tcf_idr_check_alloc(tn, &parm->index, a, bind); + index = parm->index; + ret = tcf_idr_check_alloc(tn, &index, a, bind); if (!ret) { - ret = tcf_idr_create(tn, parm->index, est, a, + ret = tcf_idr_create(tn, index, est, a, &act_connmark_ops, bind, false); if (ret) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return ret; } diff --git a/net/sched/act_csum.c b/net/sched/act_csum.c index 621fb22ce2a9..9b9288267a54 100644 --- a/net/sched/act_csum.c +++ b/net/sched/act_csum.c @@ -52,6 +52,7 @@ static int tcf_csum_init(struct net *net, struct nlattr *nla, struct tc_csum *parm; struct tcf_csum *p; int ret = 0, err; + u32 index; if (nla == NULL) return -EINVAL; @@ -64,13 +65,13 @@ static int tcf_csum_init(struct net *net, struct nlattr *nla, if (tb[TCA_CSUM_PARMS] == NULL) return -EINVAL; parm = nla_data(tb[TCA_CSUM_PARMS]); - - err = tcf_idr_check_alloc(tn, &parm->index, a, bind); + index = parm->index; + err = tcf_idr_check_alloc(tn, &index, a, bind); if (!err) { - ret = tcf_idr_create(tn, parm->index, est, a, + ret = tcf_idr_create(tn, index, est, a, &act_csum_ops, bind, true); if (ret) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return ret; } ret = ACT_P_CREATED; diff --git a/net/sched/act_ct.c b/net/sched/act_ct.c index b501ce0cf116..33a1a7406e87 100644 --- a/net/sched/act_ct.c +++ b/net/sched/act_ct.c @@ -666,6 +666,7 @@ static int tcf_ct_init(struct net *net, struct nlattr *nla, struct tc_ct *parm; struct tcf_ct *c; int err, res = 0; + u32 index; if (!nla) { NL_SET_ERR_MSG_MOD(extack, "Ct requires attributes to be passed"); @@ -681,16 +682,16 @@ static int tcf_ct_init(struct net *net, struct nlattr *nla, return -EINVAL; } parm = nla_data(tb[TCA_CT_PARMS]); - - err = tcf_idr_check_alloc(tn, &parm->index, a, bind); + index = parm->index; + err = tcf_idr_check_alloc(tn, &index, a, bind); if (err < 0) return err; if (!err) { - err = tcf_idr_create(tn, parm->index, est, a, + err = tcf_idr_create(tn, index, est, a, &act_ct_ops, bind, true); if (err) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return err; } res = ACT_P_CREATED; diff --git a/net/sched/act_ctinfo.c b/net/sched/act_ctinfo.c index 10eb2bb99861..06ef74b74911 100644 --- a/net/sched/act_ctinfo.c +++ b/net/sched/act_ctinfo.c @@ -157,10 +157,10 @@ static int tcf_ctinfo_init(struct net *net, struct nlattr *nla, struct netlink_ext_ack *extack) { struct tc_action_net *tn = net_generic(net, ctinfo_net_id); + u32 dscpmask = 0, dscpstatemask, index; struct nlattr *tb[TCA_CTINFO_MAX + 1]; struct tcf_ctinfo_params *cp_new; struct tcf_chain *goto_ch = NULL; - u32 dscpmask = 0, dscpstatemask; struct tc_ctinfo *actparm; struct tcf_ctinfo *ci; u8 dscpmaskshift; @@ -206,12 +206,13 @@ static int tcf_ctinfo_init(struct net *net, struct nlattr *nla, } /* done the validation:now to the actual action allocation */ - err = tcf_idr_check_alloc(tn, &actparm->index, a, bind); + index = actparm->index; + err = tcf_idr_check_alloc(tn, &index, a, bind); if (!err) { - ret = tcf_idr_create(tn, actparm->index, est, a, + ret = tcf_idr_create(tn, index, est, a, &act_ctinfo_ops, bind, false); if (ret) { - tcf_idr_cleanup(tn, actparm->index); + tcf_idr_cleanup(tn, index); return ret; } ret = ACT_P_CREATED; diff --git a/net/sched/act_gact.c b/net/sched/act_gact.c index b2380c5284e6..8f0140c6ca58 100644 --- a/net/sched/act_gact.c +++ b/net/sched/act_gact.c @@ -61,6 +61,7 @@ static int tcf_gact_init(struct net *net, struct nlattr *nla, struct tc_gact *parm; struct tcf_gact *gact; int ret = 0; + u32 index; int err; #ifdef CONFIG_GACT_PROB struct tc_gact_p *p_parm = NULL; @@ -77,6 +78,7 @@ static int tcf_gact_init(struct net *net, struct nlattr *nla, if (tb[TCA_GACT_PARMS] == NULL) return -EINVAL; parm = nla_data(tb[TCA_GACT_PARMS]); + index = parm->index; #ifndef CONFIG_GACT_PROB if (tb[TCA_GACT_PROB] != NULL) @@ -94,12 +96,12 @@ static int tcf_gact_init(struct net *net, struct nlattr *nla, } #endif - err = tcf_idr_check_alloc(tn, &parm->index, a, bind); + err = tcf_idr_check_alloc(tn, &index, a, bind); if (!err) { - ret = tcf_idr_create(tn, parm->index, est, a, + ret = tcf_idr_create(tn, index, est, a, &act_gact_ops, bind, true); if (ret) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return ret; } ret = ACT_P_CREATED; diff --git a/net/sched/act_ife.c b/net/sched/act_ife.c index 3578196d1600..92ee853d43e6 100644 --- a/net/sched/act_ife.c +++ b/net/sched/act_ife.c @@ -479,6 +479,7 @@ static int tcf_ife_init(struct net *net, struct nlattr *nla, u8 *saddr = NULL; bool exists = false; int ret = 0; + u32 index; int err; if (!nla) { @@ -507,7 +508,8 @@ static int tcf_ife_init(struct net *net, struct nlattr *nla, if (!p) return -ENOMEM; - err = tcf_idr_check_alloc(tn, &parm->index, a, bind); + index = parm->index; + err = tcf_idr_check_alloc(tn, &index, a, bind); if (err < 0) { kfree(p); return err; @@ -519,10 +521,10 @@ static int tcf_ife_init(struct net *net, struct nlattr *nla, } if (!exists) { - ret = tcf_idr_create(tn, parm->index, est, a, &act_ife_ops, + ret = tcf_idr_create(tn, index, est, a, &act_ife_ops, bind, true); if (ret) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); kfree(p); return ret; } diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c index 055faa298c8e..be3f88dfc37e 100644 --- a/net/sched/act_mirred.c +++ b/net/sched/act_mirred.c @@ -104,6 +104,7 @@ static int tcf_mirred_init(struct net *net, struct nlattr *nla, struct net_device *dev; bool exists = false; int ret, err; + u32 index; if (!nla) { NL_SET_ERR_MSG_MOD(extack, "Mirred requires attributes to be passed"); @@ -118,8 +119,8 @@ static int tcf_mirred_init(struct net *net, struct nlattr *nla, return -EINVAL; } parm = nla_data(tb[TCA_MIRRED_PARMS]); - - err = tcf_idr_check_alloc(tn, &parm->index, a, bind); + index = parm->index; + err = tcf_idr_check_alloc(tn, &index, a, bind); if (err < 0) return err; exists = err; @@ -136,21 +137,21 @@ static int tcf_mirred_init(struct net *net, struct nlattr *nla, if (exists) tcf_idr_release(*a, bind); else - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); NL_SET_ERR_MSG_MOD(extack, "Unknown mirred option"); return -EINVAL; } if (!exists) { if (!parm->ifindex) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); NL_SET_ERR_MSG_MOD(extack, "Specified device does not exist"); return -EINVAL; } - ret = tcf_idr_create(tn, parm->index, est, a, + ret = tcf_idr_create(tn, index, est, a, &act_mirred_ops, bind, true); if (ret) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return ret; } ret = ACT_P_CREATED; diff --git a/net/sched/act_mpls.c b/net/sched/act_mpls.c index ca2597ce4ac9..0f299e3b618c 100644 --- a/net/sched/act_mpls.c +++ b/net/sched/act_mpls.c @@ -138,6 +138,7 @@ static int tcf_mpls_init(struct net *net, struct nlattr *nla, struct tcf_mpls *m; int ret = 0, err; u8 mpls_ttl = 0; + u32 index; if (!nla) { NL_SET_ERR_MSG_MOD(extack, "Missing netlink attributes"); @@ -153,6 +154,7 @@ static int tcf_mpls_init(struct net *net, struct nlattr *nla, return -EINVAL; } parm = nla_data(tb[TCA_MPLS_PARMS]); + index = parm->index; /* Verify parameters against action type. */ switch (parm->m_action) { @@ -209,7 +211,7 @@ static int tcf_mpls_init(struct net *net, struct nlattr *nla, return -EINVAL; } - err = tcf_idr_check_alloc(tn, &parm->index, a, bind); + err = tcf_idr_check_alloc(tn, &index, a, bind); if (err < 0) return err; exists = err; @@ -217,10 +219,10 @@ static int tcf_mpls_init(struct net *net, struct nlattr *nla, return 0; if (!exists) { - ret = tcf_idr_create(tn, parm->index, est, a, + ret = tcf_idr_create(tn, index, est, a, &act_mpls_ops, bind, true); if (ret) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return ret; } diff --git a/net/sched/act_nat.c b/net/sched/act_nat.c index 45923ebb7a4f..7b858c11b1b5 100644 --- a/net/sched/act_nat.c +++ b/net/sched/act_nat.c @@ -44,6 +44,7 @@ static int tcf_nat_init(struct net *net, struct nlattr *nla, struct nlattr *est, struct tc_nat *parm; int ret = 0, err; struct tcf_nat *p; + u32 index; if (nla == NULL) return -EINVAL; @@ -56,13 +57,13 @@ static int tcf_nat_init(struct net *net, struct nlattr *nla, struct nlattr *est, if (tb[TCA_NAT_PARMS] == NULL) return -EINVAL; parm = nla_data(tb[TCA_NAT_PARMS]); - - err = tcf_idr_check_alloc(tn, &parm->index, a, bind); + index = parm->index; + err = tcf_idr_check_alloc(tn, &index, a, bind); if (!err) { - ret = tcf_idr_create(tn, parm->index, est, a, + ret = tcf_idr_create(tn, index, est, a, &act_nat_ops, bind, false); if (ret) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return ret; } ret = ACT_P_CREATED; diff --git a/net/sched/act_pedit.c b/net/sched/act_pedit.c index 45e9d6bfddb3..17360c6faeaa 100644 --- a/net/sched/act_pedit.c +++ b/net/sched/act_pedit.c @@ -149,6 +149,7 @@ static int tcf_pedit_init(struct net *net, struct nlattr *nla, struct tcf_pedit *p; int ret = 0, err; int ksize; + u32 index; if (!nla) { NL_SET_ERR_MSG_MOD(extack, "Pedit requires attributes to be passed"); @@ -179,18 +180,19 @@ static int tcf_pedit_init(struct net *net, struct nlattr *nla, if (IS_ERR(keys_ex)) return PTR_ERR(keys_ex); - err = tcf_idr_check_alloc(tn, &parm->index, a, bind); + index = parm->index; + err = tcf_idr_check_alloc(tn, &index, a, bind); if (!err) { if (!parm->nkeys) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); NL_SET_ERR_MSG_MOD(extack, "Pedit requires keys to be passed"); ret = -EINVAL; goto out_free; } - ret = tcf_idr_create(tn, parm->index, est, a, + ret = tcf_idr_create(tn, index, est, a, &act_pedit_ops, bind, false); if (ret) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); goto out_free; } ret = ACT_P_CREATED; diff --git a/net/sched/act_police.c b/net/sched/act_police.c index a065f62fa79c..49cec3e64a4d 100644 --- a/net/sched/act_police.c +++ b/net/sched/act_police.c @@ -57,6 +57,7 @@ static int tcf_police_init(struct net *net, struct nlattr *nla, struct tc_action_net *tn = net_generic(net, police_net_id); struct tcf_police_params *new; bool exists = false; + u32 index; if (nla == NULL) return -EINVAL; @@ -73,7 +74,8 @@ static int tcf_police_init(struct net *net, struct nlattr *nla, return -EINVAL; parm = nla_data(tb[TCA_POLICE_TBF]); - err = tcf_idr_check_alloc(tn, &parm->index, a, bind); + index = parm->index; + err = tcf_idr_check_alloc(tn, &index, a, bind); if (err < 0) return err; exists = err; @@ -81,10 +83,10 @@ static int tcf_police_init(struct net *net, struct nlattr *nla, return 0; if (!exists) { - ret = tcf_idr_create(tn, parm->index, NULL, a, + ret = tcf_idr_create(tn, index, NULL, a, &act_police_ops, bind, true); if (ret) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return ret; } ret = ACT_P_CREATED; diff --git a/net/sched/act_sample.c b/net/sched/act_sample.c index 274d7a0c0e25..595308d60133 100644 --- a/net/sched/act_sample.c +++ b/net/sched/act_sample.c @@ -41,8 +41,8 @@ static int tcf_sample_init(struct net *net, struct nlattr *nla, struct tc_action_net *tn = net_generic(net, sample_net_id); struct nlattr *tb[TCA_SAMPLE_MAX + 1]; struct psample_group *psample_group; + u32 psample_group_num, rate, index; struct tcf_chain *goto_ch = NULL; - u32 psample_group_num, rate; struct tc_sample *parm; struct tcf_sample *s; bool exists = false; @@ -59,8 +59,8 @@ static int tcf_sample_init(struct net *net, struct nlattr *nla, return -EINVAL; parm = nla_data(tb[TCA_SAMPLE_PARMS]); - - err = tcf_idr_check_alloc(tn, &parm->index, a, bind); + index = parm->index; + err = tcf_idr_check_alloc(tn, &index, a, bind); if (err < 0) return err; exists = err; @@ -68,10 +68,10 @@ static int tcf_sample_init(struct net *net, struct nlattr *nla, return 0; if (!exists) { - ret = tcf_idr_create(tn, parm->index, est, a, + ret = tcf_idr_create(tn, index, est, a, &act_sample_ops, bind, true); if (ret) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return ret; } ret = ACT_P_CREATED; diff --git a/net/sched/act_simple.c b/net/sched/act_simple.c index f28ddbabff76..33aefa25b545 100644 --- a/net/sched/act_simple.c +++ b/net/sched/act_simple.c @@ -95,6 +95,7 @@ static int tcf_simp_init(struct net *net, struct nlattr *nla, struct tcf_defact *d; bool exists = false; int ret = 0, err; + u32 index; if (nla == NULL) return -EINVAL; @@ -108,7 +109,8 @@ static int tcf_simp_init(struct net *net, struct nlattr *nla, return -EINVAL; parm = nla_data(tb[TCA_DEF_PARMS]); - err = tcf_idr_check_alloc(tn, &parm->index, a, bind); + index = parm->index; + err = tcf_idr_check_alloc(tn, &index, a, bind); if (err < 0) return err; exists = err; @@ -119,15 +121,15 @@ static int tcf_simp_init(struct net *net, struct nlattr *nla, if (exists) tcf_idr_release(*a, bind); else - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return -EINVAL; } if (!exists) { - ret = tcf_idr_create(tn, parm->index, est, a, + ret = tcf_idr_create(tn, index, est, a, &act_simp_ops, bind, false); if (ret) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return ret; } diff --git a/net/sched/act_skbedit.c b/net/sched/act_skbedit.c index 215a06705cef..b100870f02a6 100644 --- a/net/sched/act_skbedit.c +++ b/net/sched/act_skbedit.c @@ -99,6 +99,7 @@ static int tcf_skbedit_init(struct net *net, struct nlattr *nla, u16 *queue_mapping = NULL, *ptype = NULL; bool exists = false; int ret = 0, err; + u32 index; if (nla == NULL) return -EINVAL; @@ -146,8 +147,8 @@ static int tcf_skbedit_init(struct net *net, struct nlattr *nla, } parm = nla_data(tb[TCA_SKBEDIT_PARMS]); - - err = tcf_idr_check_alloc(tn, &parm->index, a, bind); + index = parm->index; + err = tcf_idr_check_alloc(tn, &index, a, bind); if (err < 0) return err; exists = err; @@ -158,15 +159,15 @@ static int tcf_skbedit_init(struct net *net, struct nlattr *nla, if (exists) tcf_idr_release(*a, bind); else - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return -EINVAL; } if (!exists) { - ret = tcf_idr_create(tn, parm->index, est, a, + ret = tcf_idr_create(tn, index, est, a, &act_skbedit_ops, bind, true); if (ret) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return ret; } diff --git a/net/sched/act_skbmod.c b/net/sched/act_skbmod.c index 4f07706eff07..7da3518e18ef 100644 --- a/net/sched/act_skbmod.c +++ b/net/sched/act_skbmod.c @@ -87,12 +87,12 @@ static int tcf_skbmod_init(struct net *net, struct nlattr *nla, struct tcf_skbmod_params *p, *p_old; struct tcf_chain *goto_ch = NULL; struct tc_skbmod *parm; + u32 lflags = 0, index; struct tcf_skbmod *d; bool exists = false; u8 *daddr = NULL; u8 *saddr = NULL; u16 eth_type = 0; - u32 lflags = 0; int ret = 0, err; if (!nla) @@ -122,10 +122,11 @@ static int tcf_skbmod_init(struct net *net, struct nlattr *nla, } parm = nla_data(tb[TCA_SKBMOD_PARMS]); + index = parm->index; if (parm->flags & SKBMOD_F_SWAPMAC) lflags = SKBMOD_F_SWAPMAC; - err = tcf_idr_check_alloc(tn, &parm->index, a, bind); + err = tcf_idr_check_alloc(tn, &index, a, bind); if (err < 0) return err; exists = err; @@ -136,15 +137,15 @@ static int tcf_skbmod_init(struct net *net, struct nlattr *nla, if (exists) tcf_idr_release(*a, bind); else - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return -EINVAL; } if (!exists) { - ret = tcf_idr_create(tn, parm->index, est, a, + ret = tcf_idr_create(tn, index, est, a, &act_skbmod_ops, bind, true); if (ret) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return ret; } diff --git a/net/sched/act_tunnel_key.c b/net/sched/act_tunnel_key.c index 10dffda1d5cc..6d0debdc9b97 100644 --- a/net/sched/act_tunnel_key.c +++ b/net/sched/act_tunnel_key.c @@ -225,6 +225,7 @@ static int tunnel_key_init(struct net *net, struct nlattr *nla, __be16 flags = 0; u8 tos, ttl; int ret = 0; + u32 index; int err; if (!nla) { @@ -245,7 +246,8 @@ static int tunnel_key_init(struct net *net, struct nlattr *nla, } parm = nla_data(tb[TCA_TUNNEL_KEY_PARMS]); - err = tcf_idr_check_alloc(tn, &parm->index, a, bind); + index = parm->index; + err = tcf_idr_check_alloc(tn, &index, a, bind); if (err < 0) return err; exists = err; @@ -345,7 +347,7 @@ static int tunnel_key_init(struct net *net, struct nlattr *nla, } if (!exists) { - ret = tcf_idr_create(tn, parm->index, est, a, + ret = tcf_idr_create(tn, index, est, a, &act_tunnel_key_ops, bind, true); if (ret) { NL_SET_ERR_MSG(extack, "Cannot create TC IDR"); @@ -403,7 +405,7 @@ err_out: if (exists) tcf_idr_release(*a, bind); else - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return ret; } diff --git a/net/sched/act_vlan.c b/net/sched/act_vlan.c index 9269d350fb8a..984b05ab0c87 100644 --- a/net/sched/act_vlan.c +++ b/net/sched/act_vlan.c @@ -116,6 +116,7 @@ static int tcf_vlan_init(struct net *net, struct nlattr *nla, u8 push_prio = 0; bool exists = false; int ret = 0, err; + u32 index; if (!nla) return -EINVAL; @@ -128,7 +129,8 @@ static int tcf_vlan_init(struct net *net, struct nlattr *nla, if (!tb[TCA_VLAN_PARMS]) return -EINVAL; parm = nla_data(tb[TCA_VLAN_PARMS]); - err = tcf_idr_check_alloc(tn, &parm->index, a, bind); + index = parm->index; + err = tcf_idr_check_alloc(tn, &index, a, bind); if (err < 0) return err; exists = err; @@ -144,7 +146,7 @@ static int tcf_vlan_init(struct net *net, struct nlattr *nla, if (exists) tcf_idr_release(*a, bind); else - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return -EINVAL; } push_vid = nla_get_u16(tb[TCA_VLAN_PUSH_VLAN_ID]); @@ -152,7 +154,7 @@ static int tcf_vlan_init(struct net *net, struct nlattr *nla, if (exists) tcf_idr_release(*a, bind); else - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return -ERANGE; } @@ -166,7 +168,7 @@ static int tcf_vlan_init(struct net *net, struct nlattr *nla, if (exists) tcf_idr_release(*a, bind); else - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return -EPROTONOSUPPORT; } } else { @@ -180,16 +182,16 @@ static int tcf_vlan_init(struct net *net, struct nlattr *nla, if (exists) tcf_idr_release(*a, bind); else - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return -EINVAL; } action = parm->v_action; if (!exists) { - ret = tcf_idr_create(tn, parm->index, est, a, + ret = tcf_idr_create(tn, index, est, a, &act_vlan_ops, bind, true); if (ret) { - tcf_idr_cleanup(tn, parm->index); + tcf_idr_cleanup(tn, index); return ret; } -- cgit From 60d60c8fbd8d1acf25b041ecd72ae4fa16e9405b Mon Sep 17 00:00:00 2001 From: Qian Cai Date: Thu, 1 Aug 2019 09:52:54 -0400 Subject: net/mlx5e: always initialize frag->last_in_page The commit 069d11465a80 ("net/mlx5e: RX, Enhance legacy Receive Queue memory scheme") introduced an undefined behaviour below due to "frag->last_in_page" is only initialized in mlx5e_init_frags_partition() when, if (next_frag.offset + frag_info[f].frag_stride > PAGE_SIZE) or after bailed out the loop, for (i = 0; i < mlx5_wq_cyc_get_size(&rq->wqe.wq); i++) As the result, there could be some "frag" have uninitialized value of "last_in_page". Later, get_frag() obtains those "frag" and check "frag->last_in_page" in mlx5e_put_rx_frag() and triggers the error during boot. Fix it by always initializing "frag->last_in_page" to "false" in mlx5e_init_frags_partition(). UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:325:12 load of value 170 is not a valid value for type 'bool' (aka '_Bool') Call trace: dump_backtrace+0x0/0x264 show_stack+0x20/0x2c dump_stack+0xb0/0x104 __ubsan_handle_load_invalid_value+0x104/0x128 mlx5e_handle_rx_cqe+0x8e8/0x12cc [mlx5_core] mlx5e_poll_rx_cq+0xca8/0x1a94 [mlx5_core] mlx5e_napi_poll+0x17c/0xa30 [mlx5_core] net_rx_action+0x248/0x940 __do_softirq+0x350/0x7b8 irq_exit+0x200/0x26c __handle_domain_irq+0xc8/0x128 gic_handle_irq+0x138/0x228 el1_irq+0xb8/0x140 arch_cpu_idle+0x1a4/0x348 do_idle+0x114/0x1b0 cpu_startup_entry+0x24/0x28 rest_init+0x1ac/0x1dc arch_call_rest_init+0x10/0x18 start_kernel+0x4d4/0x57c Fixes: 069d11465a80 ("net/mlx5e: RX, Enhance legacy Receive Queue memory scheme") Signed-off-by: Qian Cai Reviewed-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 570c42b7eeea..6c712c5be4d8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -331,12 +331,11 @@ static inline u64 mlx5e_get_mpwqe_offset(struct mlx5e_rq *rq, u16 wqe_ix) static void mlx5e_init_frags_partition(struct mlx5e_rq *rq) { - struct mlx5e_wqe_frag_info next_frag, *prev; + struct mlx5e_wqe_frag_info next_frag = {}; + struct mlx5e_wqe_frag_info *prev = NULL; int i; next_frag.di = &rq->wqe.di[0]; - next_frag.offset = 0; - prev = NULL; for (i = 0; i < mlx5_wq_cyc_get_size(&rq->wqe.wq); i++) { struct mlx5e_rq_frag_info *frag_info = &rq->wqe.info.arr[0]; -- cgit From 4de9c89a4982431c4a02739743fd360dc5581f22 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Thu, 1 Aug 2019 20:00:16 +0200 Subject: bpf: fix XDP vlan selftests test_xdp_vlan.sh Change BPF selftest test_xdp_vlan.sh to (default) use generic XDP. This selftest was created together with a fix for generic XDP, in commit 297249569932 ("net: fix generic XDP to handle if eth header was mangled"). And was suppose to catch if generic XDP was broken again. The tests are using veth and assumed that veth driver didn't support native driver XDP, thus it used the (ip link set) 'xdp' attach that fell back to generic-XDP. But veth gained native-XDP support in 948d4f214fde ("veth: Add driver XDP"), which caused this test script to use native-XDP. Fixes: 948d4f214fde ("veth: Add driver XDP") Fixes: 97396ff0bc2d ("selftests/bpf: add XDP selftests for modifying and popping VLAN headers") Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- tools/testing/selftests/bpf/test_xdp_vlan.sh | 42 ++++++++++++++++++++++++---- 1 file changed, 36 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/bpf/test_xdp_vlan.sh b/tools/testing/selftests/bpf/test_xdp_vlan.sh index 51a3a31d1aac..c8aed63b0ffe 100755 --- a/tools/testing/selftests/bpf/test_xdp_vlan.sh +++ b/tools/testing/selftests/bpf/test_xdp_vlan.sh @@ -1,7 +1,12 @@ #!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Author: Jesper Dangaard Brouer TESTNAME=xdp_vlan +# Default XDP mode +XDP_MODE=xdpgeneric + usage() { echo "Testing XDP + TC eBPF VLAN manipulations: $TESTNAME" echo "" @@ -9,9 +14,23 @@ usage() { echo " -v | --verbose : Verbose" echo " --flush : Flush before starting (e.g. after --interactive)" echo " --interactive : Keep netns setup running after test-run" + echo " --mode=XXX : Choose XDP mode (xdp | xdpgeneric | xdpdrv)" echo "" } +valid_xdp_mode() +{ + local mode=$1 + + case "$mode" in + xdpgeneric | xdpdrv | xdp) + return 0 + ;; + *) + return 1 + esac +} + cleanup() { local status=$? @@ -37,7 +56,7 @@ cleanup() # Using external program "getopt" to get --long-options OPTIONS=$(getopt -o hvfi: \ - --long verbose,flush,help,interactive,debug -- "$@") + --long verbose,flush,help,interactive,debug,mode: -- "$@") if (( $? != 0 )); then usage echo "selftests: $TESTNAME [FAILED] Error calling getopt, unknown option?" @@ -60,6 +79,11 @@ while true; do cleanup shift ;; + --mode ) + shift + XDP_MODE=$1 + shift + ;; -- ) shift break @@ -81,8 +105,14 @@ if [ "$EUID" -ne 0 ]; then exit 1 fi -ip link set dev lo xdp off 2>/dev/null > /dev/null -if [ $? -ne 0 ];then +valid_xdp_mode $XDP_MODE +if [ $? -ne 0 ]; then + echo "selftests: $TESTNAME [FAILED] unknown XDP mode ($XDP_MODE)" + exit 1 +fi + +ip link set dev lo xdpgeneric off 2>/dev/null > /dev/null +if [ $? -ne 0 ]; then echo "selftests: $TESTNAME [SKIP] need ip xdp support" exit 0 fi @@ -166,7 +196,7 @@ export FILE=test_xdp_vlan.o # First test: Remove VLAN by setting VLAN ID 0, using "xdp_vlan_change" export XDP_PROG=xdp_vlan_change -ip netns exec ns1 ip link set $DEVNS1 xdp object $FILE section $XDP_PROG +ip netns exec ns1 ip link set $DEVNS1 $XDP_MODE object $FILE section $XDP_PROG # In ns1: egress use TC to add back VLAN tag 4011 # (del cmd) @@ -187,8 +217,8 @@ ip netns exec ns1 ping -W 2 -c 3 $IPADDR2 # ETH_P_8021Q indication, and this cause overwriting of our changes. # export XDP_PROG=xdp_vlan_remove_outer2 -ip netns exec ns1 ip link set $DEVNS1 xdp off -ip netns exec ns1 ip link set $DEVNS1 xdp object $FILE section $XDP_PROG +ip netns exec ns1 ip link set $DEVNS1 $XDP_MODE off +ip netns exec ns1 ip link set $DEVNS1 $XDP_MODE object $FILE section $XDP_PROG # Now the namespaces should still be able reach each-other, test with ping: ip netns exec ns2 ping -W 2 -c 3 $IPADDR1 -- cgit From d35661fcf95d8818c1f9acc818a1bad23dda4e1c Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Thu, 1 Aug 2019 20:00:21 +0200 Subject: selftests/bpf: add wrapper scripts for test_xdp_vlan.sh In-order to test both native-XDP (xdpdrv) and generic-XDP (xdpgeneric) create two wrapper test scripts, that start the test_xdp_vlan.sh script with these modes. Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- tools/testing/selftests/bpf/Makefile | 3 ++- tools/testing/selftests/bpf/test_xdp_vlan.sh | 5 ++++- tools/testing/selftests/bpf/test_xdp_vlan_mode_generic.sh | 9 +++++++++ tools/testing/selftests/bpf/test_xdp_vlan_mode_native.sh | 9 +++++++++ 4 files changed, 24 insertions(+), 2 deletions(-) create mode 100755 tools/testing/selftests/bpf/test_xdp_vlan_mode_generic.sh create mode 100755 tools/testing/selftests/bpf/test_xdp_vlan_mode_native.sh diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 11c9c62c3362..c085964e1d05 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -57,7 +57,8 @@ TEST_PROGS := test_kmod.sh \ test_lirc_mode2.sh \ test_skb_cgroup_id.sh \ test_flow_dissector.sh \ - test_xdp_vlan.sh \ + test_xdp_vlan_mode_generic.sh \ + test_xdp_vlan_mode_native.sh \ test_lwt_ip_encap.sh \ test_tcp_check_syncookie.sh \ test_tc_tunnel.sh \ diff --git a/tools/testing/selftests/bpf/test_xdp_vlan.sh b/tools/testing/selftests/bpf/test_xdp_vlan.sh index c8aed63b0ffe..7348661be815 100755 --- a/tools/testing/selftests/bpf/test_xdp_vlan.sh +++ b/tools/testing/selftests/bpf/test_xdp_vlan.sh @@ -2,7 +2,10 @@ # SPDX-License-Identifier: GPL-2.0 # Author: Jesper Dangaard Brouer -TESTNAME=xdp_vlan +# Allow wrapper scripts to name test +if [ -z "$TESTNAME" ]; then + TESTNAME=xdp_vlan +fi # Default XDP mode XDP_MODE=xdpgeneric diff --git a/tools/testing/selftests/bpf/test_xdp_vlan_mode_generic.sh b/tools/testing/selftests/bpf/test_xdp_vlan_mode_generic.sh new file mode 100755 index 000000000000..c515326d6d59 --- /dev/null +++ b/tools/testing/selftests/bpf/test_xdp_vlan_mode_generic.sh @@ -0,0 +1,9 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Exit on failure +set -e + +# Wrapper script to test generic-XDP +export TESTNAME=xdp_vlan_mode_generic +./test_xdp_vlan.sh --mode=xdpgeneric diff --git a/tools/testing/selftests/bpf/test_xdp_vlan_mode_native.sh b/tools/testing/selftests/bpf/test_xdp_vlan_mode_native.sh new file mode 100755 index 000000000000..5cf7ce1f16c1 --- /dev/null +++ b/tools/testing/selftests/bpf/test_xdp_vlan_mode_native.sh @@ -0,0 +1,9 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Exit on failure +set -e + +# Wrapper script to test native-XDP +export TESTNAME=xdp_vlan_mode_native +./test_xdp_vlan.sh --mode=xdpdrv -- cgit From 13978d1e73d2fcfb6addcf3392707ad68fa88ccb Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Thu, 1 Aug 2019 20:00:26 +0200 Subject: selftests/bpf: reduce time to execute test_xdp_vlan.sh Given the increasing number of BPF selftests, it makes sense to reduce the time to execute these tests. The ping parameters are adjusted to reduce the time from measures 9 sec to approx 2.8 sec. Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- tools/testing/selftests/bpf/test_xdp_vlan.sh | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/bpf/test_xdp_vlan.sh b/tools/testing/selftests/bpf/test_xdp_vlan.sh index 7348661be815..bb8b0da91686 100755 --- a/tools/testing/selftests/bpf/test_xdp_vlan.sh +++ b/tools/testing/selftests/bpf/test_xdp_vlan.sh @@ -188,7 +188,7 @@ ip netns exec ns2 ip link set lo up # At this point, the hosts cannot reach each-other, # because ns2 are using VLAN tags on the packets. -ip netns exec ns2 sh -c 'ping -W 1 -c 1 100.64.41.1 || echo "Okay ping fails"' +ip netns exec ns2 sh -c 'ping -W 1 -c 1 100.64.41.1 || echo "Success: First ping must fail"' # Now we can use the test_xdp_vlan.c program to pop/push these VLAN tags @@ -210,8 +210,8 @@ ip netns exec ns1 tc filter add dev $DEVNS1 egress \ prio 1 handle 1 bpf da obj $FILE sec tc_vlan_push # Now the namespaces can reach each-other, test with ping: -ip netns exec ns2 ping -W 2 -c 3 $IPADDR1 -ip netns exec ns1 ping -W 2 -c 3 $IPADDR2 +ip netns exec ns2 ping -i 0.2 -W 2 -c 2 $IPADDR1 +ip netns exec ns1 ping -i 0.2 -W 2 -c 2 $IPADDR2 # Second test: Replace xdp prog, that fully remove vlan header # @@ -224,5 +224,5 @@ ip netns exec ns1 ip link set $DEVNS1 $XDP_MODE off ip netns exec ns1 ip link set $DEVNS1 $XDP_MODE object $FILE section $XDP_PROG # Now the namespaces should still be able reach each-other, test with ping: -ip netns exec ns2 ping -W 2 -c 3 $IPADDR1 -ip netns exec ns1 ping -W 2 -c 3 $IPADDR2 +ip netns exec ns2 ping -i 0.2 -W 2 -c 2 $IPADDR1 +ip netns exec ns1 ping -i 0.2 -W 2 -c 2 $IPADDR2 -- cgit From 065af355470519bd184019a93ac579f22b036045 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Thu, 1 Aug 2019 20:00:31 +0200 Subject: net: fix bpf_xdp_adjust_head regression for generic-XDP When generic-XDP was moved to a later processing step by commit 458bf2f224f0 ("net: core: support XDP generic on stacked devices.") a regression was introduced when using bpf_xdp_adjust_head. The issue is that after this commit the skb->network_header is now changed prior to calling generic XDP and not after. Thus, if the header is changed by XDP (via bpf_xdp_adjust_head), then skb->network_header also need to be updated again. Fix by calling skb_reset_network_header(). Fixes: 458bf2f224f0 ("net: core: support XDP generic on stacked devices.") Reported-by: Brandon Cazander Signed-off-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- net/core/dev.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 2f341b850845..0891f499c1bb 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4374,12 +4374,17 @@ static u32 netif_receive_generic_xdp(struct sk_buff *skb, act = bpf_prog_run_xdp(xdp_prog, xdp); + /* check if bpf_xdp_adjust_head was used */ off = xdp->data - orig_data; - if (off > 0) - __skb_pull(skb, off); - else if (off < 0) - __skb_push(skb, -off); - skb->mac_header += off; + if (off) { + if (off > 0) + __skb_pull(skb, off); + else if (off < 0) + __skb_push(skb, -off); + + skb->mac_header += off; + skb_reset_network_header(skb); + } /* check if bpf_xdp_adjust_tail was used. it can only "shrink" * pckt. -- cgit From cc798c83898ea0a77fcaa1a92afda35c3c3ded74 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Mon, 5 Aug 2019 10:34:04 -0700 Subject: kernfs: fix memleak in kernel_ops_readdir() If getdents64 is killed or hits on segfault, it'll leave cgroups directories in sysfs pinned leaking memory because the kernfs node won't be freed on rmdir and the parent neither. Repro: # for i in `seq 1000`; do mkdir $i; done # rmdir * # for i in `seq 1000`; do mkdir $i; done # rmdir * # for i in `seq 1000`; do while :; do ls $i/ >/dev/null; done & done # while :; do killall ls; done kernfs_node_cache in /proc/slabinfo keeps going up as expected. Signed-off-by: Andrea Arcangeli Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org # goes way back to original sysfs days Link: https://lore.kernel.org/r/20190805173404.GF136335@devbig004.ftw2.facebook.com Signed-off-by: Greg Kroah-Hartman --- fs/kernfs/dir.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/kernfs/dir.c b/fs/kernfs/dir.c index a387534c9577..1e98efc2bf6d 100644 --- a/fs/kernfs/dir.c +++ b/fs/kernfs/dir.c @@ -1684,11 +1684,14 @@ static int kernfs_fop_readdir(struct file *file, struct dir_context *ctx) kernfs_get(pos); mutex_unlock(&kernfs_mutex); - if (!dir_emit(ctx, name, len, ino, type)) - return 0; + if (unlikely(!dir_emit(ctx, name, len, ino, type))) { + kernfs_put(pos); + goto out; + } mutex_lock(&kernfs_mutex); } mutex_unlock(&kernfs_mutex); +out: file->private_data = NULL; ctx->pos = INT_MAX; return 0; -- cgit From 49da065f7b1f27be625de65d6d55bdd22ac6b5c2 Mon Sep 17 00:00:00 2001 From: Logan Gunthorpe Date: Fri, 26 Jul 2019 12:31:30 -0600 Subject: NTB/msi: remove incorrect MODULE defines msi.c is not a module on its own right and should not have the MODULE_[LICENSE|VERSION|AUTHOR|DESCRIPTION] definitions. This caused a regression noticed by lkp with the following back trace: WARNING: CPU: 0 PID: 1 at kernel/params.c:861 param_sysfs_init+0xb1/0x20a Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc1-00018-g26b3a37b928457 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 RIP: 0010:param_sysfs_init+0xb1/0x20a Code: 24 38 e8 ec 17 2e fd 49 8b 7c 24 38 e8 76 fe ff ff 48 85 c0 48 89 c5 74 25 31 d2 4c 89 e6 48 89 c7 e8 6d 6f 3c fd 85 c0 74 02 <0f> 0b 48 89 ef 31 f6 e8 5d 70 a7 fe 48 89 ef e8 95 52 a7 fe 48 83 RSP: 0000:ffff88806b0ffe30 EFLAGS: 00010282 RAX: 00000000ffffffef RBX: ffffffff83774220 RCX: ffff88806a85e880 RDX: 00000000ffffffef RSI: ffff88806b000400 RDI: ffff88806a8608c0 RBP: ffff88806b392000 R08: ffffed100d61ff59 R09: ffffed100d61ff59 R10: 0000000000000001 R11: ffffed100d61ff58 R12: ffffffff83974bc0 R13: 0000000000000004 R14: 0000000000000028 R15: 00000000000003b9 FS: 0000000000000000(0000) GS:ffff88806b800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000000380e000 CR4: 00000000000406b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? file_caps_disable+0x10/0x10 ? locate_module_kobject+0xf2/0xf2 do_one_initcall+0x47/0x1f0 kernel_init_freeable+0x1b1/0x243 ? rest_init+0xd0/0xd0 kernel_init+0xa/0x130 ? calculate_sigpending+0x63/0x80 ? rest_init+0xd0/0xd0 ret_from_fork+0x1f/0x30 ---[ end trace 78201497ae74cc91 ]--- Reported-by: kernel test robot Fixes: 26b3a37b9284 ("NTB: Introduce MSI library") Signed-off-by: Logan Gunthorpe Signed-off-by: Jon Mason --- drivers/ntb/msi.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/ntb/msi.c b/drivers/ntb/msi.c index 9dddf133658f..0a5e884a920c 100644 --- a/drivers/ntb/msi.c +++ b/drivers/ntb/msi.c @@ -6,11 +6,6 @@ #include #include -MODULE_LICENSE("Dual BSD/GPL"); -MODULE_VERSION("0.1"); -MODULE_AUTHOR("Logan Gunthorpe "); -MODULE_DESCRIPTION("NTB MSI Interrupt Library"); - struct ntb_msi { u64 base_addr; u64 end_addr; -- cgit From 5d92e631b8be8965a90c144320f06e096081a551 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Thu, 1 Aug 2019 14:36:01 -0700 Subject: net/tls: partially revert fix transition through disconnect with close Looks like we were slightly overzealous with the shutdown() cleanup. Even though the sock->sk_state can reach CLOSED again, socket->state will not got back to SS_UNCONNECTED once connections is ESTABLISHED. Meaning we will see EISCONN if we try to reconnect, and EINVAL if we try to listen. Only listen sockets can be shutdown() and reused, but since ESTABLISHED sockets can never be re-connected() or used for listen() we don't need to try to clean up the ULP state early. Fixes: 32857cf57f92 ("net/tls: fix transition through disconnect with close") Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- Documentation/networking/tls-offload.rst | 6 ---- include/net/tls.h | 2 -- net/tls/tls_main.c | 55 -------------------------------- 3 files changed, 63 deletions(-) diff --git a/Documentation/networking/tls-offload.rst b/Documentation/networking/tls-offload.rst index 2d9f9ebf4117..b70b70dc4524 100644 --- a/Documentation/networking/tls-offload.rst +++ b/Documentation/networking/tls-offload.rst @@ -524,9 +524,3 @@ Redirects leak clear text In the RX direction, if segment has already been decrypted by the device and it gets redirected or mirrored - clear text will be transmitted out. - -shutdown() doesn't clear TLS state ----------------------------------- - -shutdown() system call allows for a TLS socket to be reused as a different -connection. Offload doesn't currently handle that. diff --git a/include/net/tls.h b/include/net/tls.h index 9e425ac2de45..41b2d41bb1b8 100644 --- a/include/net/tls.h +++ b/include/net/tls.h @@ -290,8 +290,6 @@ struct tls_context { struct list_head list; refcount_t refcount; - - struct work_struct gc; }; enum tls_offload_ctx_dir { diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index f208f8455ef2..9cbbae606ced 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -261,33 +261,6 @@ void tls_ctx_free(struct tls_context *ctx) kfree(ctx); } -static void tls_ctx_free_deferred(struct work_struct *gc) -{ - struct tls_context *ctx = container_of(gc, struct tls_context, gc); - - /* Ensure any remaining work items are completed. The sk will - * already have lost its tls_ctx reference by the time we get - * here so no xmit operation will actually be performed. - */ - if (ctx->tx_conf == TLS_SW) { - tls_sw_cancel_work_tx(ctx); - tls_sw_free_ctx_tx(ctx); - } - - if (ctx->rx_conf == TLS_SW) { - tls_sw_strparser_done(ctx); - tls_sw_free_ctx_rx(ctx); - } - - tls_ctx_free(ctx); -} - -static void tls_ctx_free_wq(struct tls_context *ctx) -{ - INIT_WORK(&ctx->gc, tls_ctx_free_deferred); - schedule_work(&ctx->gc); -} - static void tls_sk_proto_cleanup(struct sock *sk, struct tls_context *ctx, long timeo) { @@ -315,29 +288,6 @@ static void tls_sk_proto_cleanup(struct sock *sk, #endif } -static void tls_sk_proto_unhash(struct sock *sk) -{ - struct inet_connection_sock *icsk = inet_csk(sk); - long timeo = sock_sndtimeo(sk, 0); - struct tls_context *ctx; - - if (unlikely(!icsk->icsk_ulp_data)) { - if (sk->sk_prot->unhash) - sk->sk_prot->unhash(sk); - } - - ctx = tls_get_ctx(sk); - tls_sk_proto_cleanup(sk, ctx, timeo); - write_lock_bh(&sk->sk_callback_lock); - icsk->icsk_ulp_data = NULL; - sk->sk_prot = ctx->sk_proto; - write_unlock_bh(&sk->sk_callback_lock); - - if (ctx->sk_proto->unhash) - ctx->sk_proto->unhash(sk); - tls_ctx_free_wq(ctx); -} - static void tls_sk_proto_close(struct sock *sk, long timeout) { struct inet_connection_sock *icsk = inet_csk(sk); @@ -786,7 +736,6 @@ static void build_protos(struct proto prot[TLS_NUM_CONFIG][TLS_NUM_CONFIG], prot[TLS_BASE][TLS_BASE].setsockopt = tls_setsockopt; prot[TLS_BASE][TLS_BASE].getsockopt = tls_getsockopt; prot[TLS_BASE][TLS_BASE].close = tls_sk_proto_close; - prot[TLS_BASE][TLS_BASE].unhash = tls_sk_proto_unhash; prot[TLS_SW][TLS_BASE] = prot[TLS_BASE][TLS_BASE]; prot[TLS_SW][TLS_BASE].sendmsg = tls_sw_sendmsg; @@ -804,20 +753,16 @@ static void build_protos(struct proto prot[TLS_NUM_CONFIG][TLS_NUM_CONFIG], #ifdef CONFIG_TLS_DEVICE prot[TLS_HW][TLS_BASE] = prot[TLS_BASE][TLS_BASE]; - prot[TLS_HW][TLS_BASE].unhash = base->unhash; prot[TLS_HW][TLS_BASE].sendmsg = tls_device_sendmsg; prot[TLS_HW][TLS_BASE].sendpage = tls_device_sendpage; prot[TLS_HW][TLS_SW] = prot[TLS_BASE][TLS_SW]; - prot[TLS_HW][TLS_SW].unhash = base->unhash; prot[TLS_HW][TLS_SW].sendmsg = tls_device_sendmsg; prot[TLS_HW][TLS_SW].sendpage = tls_device_sendpage; prot[TLS_BASE][TLS_HW] = prot[TLS_BASE][TLS_SW]; - prot[TLS_BASE][TLS_HW].unhash = base->unhash; prot[TLS_SW][TLS_HW] = prot[TLS_SW][TLS_SW]; - prot[TLS_SW][TLS_HW].unhash = base->unhash; prot[TLS_HW][TLS_HW] = prot[TLS_HW][TLS_SW]; #endif -- cgit From cd114d2e81f632104b3f1e804104060b97337410 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Thu, 1 Aug 2019 14:36:02 -0700 Subject: selftests/tls: add a litmus test for the socket reuse through shutdown Make sure that shutdown never works, and at the same time document how I tested to came to the conclusion that currently reuse is not possible. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller --- tools/testing/selftests/net/tls.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c index d995e6503b1a..4c285b6e1db8 100644 --- a/tools/testing/selftests/net/tls.c +++ b/tools/testing/selftests/net/tls.c @@ -984,6 +984,30 @@ TEST_F(tls, shutdown_unsent) shutdown(self->cfd, SHUT_RDWR); } +TEST_F(tls, shutdown_reuse) +{ + struct sockaddr_in addr; + int ret; + + shutdown(self->fd, SHUT_RDWR); + shutdown(self->cfd, SHUT_RDWR); + close(self->cfd); + + addr.sin_family = AF_INET; + addr.sin_addr.s_addr = htonl(INADDR_ANY); + addr.sin_port = 0; + + ret = bind(self->fd, &addr, sizeof(addr)); + EXPECT_EQ(ret, 0); + ret = listen(self->fd, 10); + EXPECT_EQ(ret, -1); + EXPECT_EQ(errno, EINVAL); + + ret = connect(self->fd, &addr, sizeof(addr)); + EXPECT_EQ(ret, -1); + EXPECT_EQ(errno, EISCONN); +} + TEST(non_established) { struct tls12_crypto_info_aes_gcm_256 tls12; struct sockaddr_in addr; -- cgit From cff6a327d78b05c98e0d1c4be77225ea2c0bfe8e Mon Sep 17 00:00:00 2001 From: David Ahern Date: Thu, 1 Aug 2019 14:36:35 -0700 Subject: ipv6: Fix unbalanced rcu locking in rt6_update_exception_stamp_rt The nexthop path in rt6_update_exception_stamp_rt needs to call rcu_read_unlock if it fails to find a fib6_nh match rather than just returning. Fixes: e659ba31d806 ("ipv6: Handle all fib6_nh in a nexthop in exception handling") Signed-off-by: David Ahern Signed-off-by: David S. Miller --- net/ipv6/route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index e49fec767a10..fd059e08785a 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1951,7 +1951,7 @@ static void rt6_update_exception_stamp_rt(struct rt6_info *rt) nexthop_for_each_fib6_nh(from->nh, fib6_nh_find_match, &arg); if (!arg.match) - return; + goto unlock; fib6_nh = arg.match; } else { fib6_nh = from->fib6_nh; -- cgit From 438b43bdb95d3189e0098919f321c014ed71f410 Mon Sep 17 00:00:00 2001 From: Catherine Sullivan Date: Thu, 1 Aug 2019 16:07:31 -0700 Subject: gve: Fix case where desc_cnt and data_cnt can get out of sync desc_cnt and data_cnt should always be equal. In the case of a dropped packet desc_cnt was still getting updated (correctly), data_cnt was not. To eliminate this bug and prevent it from recurring this patch combines them into one ring level cnt. Signed-off-by: Catherine Sullivan Reviewed-by: Sagi Shahar Signed-off-by: David S. Miller --- drivers/net/ethernet/google/gve/gve.h | 8 +++---- drivers/net/ethernet/google/gve/gve_ethtool.c | 4 ++-- drivers/net/ethernet/google/gve/gve_rx.c | 34 ++++++++++++--------------- 3 files changed, 20 insertions(+), 26 deletions(-) diff --git a/drivers/net/ethernet/google/gve/gve.h b/drivers/net/ethernet/google/gve/gve.h index 92372dc43be8..ebc37e256922 100644 --- a/drivers/net/ethernet/google/gve/gve.h +++ b/drivers/net/ethernet/google/gve/gve.h @@ -31,9 +31,6 @@ struct gve_rx_desc_queue { struct gve_rx_desc *desc_ring; /* the descriptor ring */ dma_addr_t bus; /* the bus for the desc_ring */ - u32 cnt; /* free-running total number of completed packets */ - u32 fill_cnt; /* free-running total number of descriptors posted */ - u32 mask; /* masks the cnt to the size of the ring */ u8 seqno; /* the next expected seqno for this desc*/ }; @@ -60,8 +57,6 @@ struct gve_rx_data_queue { dma_addr_t data_bus; /* dma mapping of the slots */ struct gve_rx_slot_page_info *page_info; /* page info of the buffers */ struct gve_queue_page_list *qpl; /* qpl assigned to this queue */ - u32 mask; /* masks the cnt to the size of the ring */ - u32 cnt; /* free-running total number of completed packets */ }; struct gve_priv; @@ -73,6 +68,9 @@ struct gve_rx_ring { struct gve_rx_data_queue data; u64 rbytes; /* free-running bytes received */ u64 rpackets; /* free-running packets received */ + u32 cnt; /* free-running total number of completed packets */ + u32 fill_cnt; /* free-running total number of descs and buffs posted */ + u32 mask; /* masks the cnt and fill_cnt to the size of the ring */ u32 q_num; /* queue index */ u32 ntfy_id; /* notification block index */ struct gve_queue_resources *q_resources; /* head and tail pointer idx */ diff --git a/drivers/net/ethernet/google/gve/gve_ethtool.c b/drivers/net/ethernet/google/gve/gve_ethtool.c index 26540b856541..d8fa816f4473 100644 --- a/drivers/net/ethernet/google/gve/gve_ethtool.c +++ b/drivers/net/ethernet/google/gve/gve_ethtool.c @@ -138,8 +138,8 @@ gve_get_ethtool_stats(struct net_device *netdev, for (ring = 0; ring < priv->rx_cfg.num_queues; ring++) { struct gve_rx_ring *rx = &priv->rx[ring]; - data[i++] = rx->desc.cnt; - data[i++] = rx->desc.fill_cnt; + data[i++] = rx->cnt; + data[i++] = rx->fill_cnt; } } else { i += priv->rx_cfg.num_queues * NUM_GVE_RX_CNTS; diff --git a/drivers/net/ethernet/google/gve/gve_rx.c b/drivers/net/ethernet/google/gve/gve_rx.c index 1914b8350da7..59564ac99d2a 100644 --- a/drivers/net/ethernet/google/gve/gve_rx.c +++ b/drivers/net/ethernet/google/gve/gve_rx.c @@ -37,7 +37,7 @@ static void gve_rx_free_ring(struct gve_priv *priv, int idx) rx->data.qpl = NULL; kvfree(rx->data.page_info); - slots = rx->data.mask + 1; + slots = rx->mask + 1; bytes = sizeof(*rx->data.data_ring) * slots; dma_free_coherent(dev, bytes, rx->data.data_ring, rx->data.data_bus); @@ -64,7 +64,7 @@ static int gve_prefill_rx_pages(struct gve_rx_ring *rx) /* Allocate one page per Rx queue slot. Each page is split into two * packet buffers, when possible we "page flip" between the two. */ - slots = rx->data.mask + 1; + slots = rx->mask + 1; rx->data.page_info = kvzalloc(slots * sizeof(*rx->data.page_info), GFP_KERNEL); @@ -111,7 +111,7 @@ static int gve_rx_alloc_ring(struct gve_priv *priv, int idx) rx->q_num = idx; slots = priv->rx_pages_per_qpl; - rx->data.mask = slots - 1; + rx->mask = slots - 1; /* alloc rx data ring */ bytes = sizeof(*rx->data.data_ring) * slots; @@ -125,7 +125,7 @@ static int gve_rx_alloc_ring(struct gve_priv *priv, int idx) err = -ENOMEM; goto abort_with_slots; } - rx->desc.fill_cnt = filled_pages; + rx->fill_cnt = filled_pages; /* Ensure data ring slots (packet buffers) are visible. */ dma_wmb(); @@ -156,8 +156,8 @@ static int gve_rx_alloc_ring(struct gve_priv *priv, int idx) err = -ENOMEM; goto abort_with_q_resources; } - rx->desc.mask = slots - 1; - rx->desc.cnt = 0; + rx->mask = slots - 1; + rx->cnt = 0; rx->desc.seqno = 1; gve_rx_add_to_block(priv, idx); @@ -213,7 +213,7 @@ void gve_rx_write_doorbell(struct gve_priv *priv, struct gve_rx_ring *rx) { u32 db_idx = be32_to_cpu(rx->q_resources->db_index); - iowrite32be(rx->desc.fill_cnt, &priv->db_bar2[db_idx]); + iowrite32be(rx->fill_cnt, &priv->db_bar2[db_idx]); } static enum pkt_hash_types gve_rss_type(__be16 pkt_flags) @@ -273,7 +273,7 @@ static void gve_rx_flip_buff(struct gve_rx_slot_page_info *page_info, } static bool gve_rx(struct gve_rx_ring *rx, struct gve_rx_desc *rx_desc, - netdev_features_t feat) + netdev_features_t feat, u32 idx) { struct gve_rx_slot_page_info *page_info; struct gve_priv *priv = rx->gve; @@ -282,14 +282,12 @@ static bool gve_rx(struct gve_rx_ring *rx, struct gve_rx_desc *rx_desc, struct sk_buff *skb; int pagecount; u16 len; - u32 idx; /* drop this packet */ if (unlikely(rx_desc->flags_seq & GVE_RXF_ERR)) return true; len = be16_to_cpu(rx_desc->len) - GVE_RX_PAD; - idx = rx->data.cnt & rx->data.mask; page_info = &rx->data.page_info[idx]; /* gvnic can only receive into registered segments. If the buffer @@ -340,8 +338,6 @@ have_skb: if (!skb) return true; - rx->data.cnt++; - if (likely(feat & NETIF_F_RXCSUM)) { /* NIC passes up the partial sum */ if (rx_desc->csum) @@ -370,7 +366,7 @@ static bool gve_rx_work_pending(struct gve_rx_ring *rx) __be16 flags_seq; u32 next_idx; - next_idx = rx->desc.cnt & rx->desc.mask; + next_idx = rx->cnt & rx->mask; desc = rx->desc.desc_ring + next_idx; flags_seq = desc->flags_seq; @@ -385,8 +381,8 @@ bool gve_clean_rx_done(struct gve_rx_ring *rx, int budget, { struct gve_priv *priv = rx->gve; struct gve_rx_desc *desc; - u32 cnt = rx->desc.cnt; - u32 idx = cnt & rx->desc.mask; + u32 cnt = rx->cnt; + u32 idx = cnt & rx->mask; u32 work_done = 0; u64 bytes = 0; @@ -401,10 +397,10 @@ bool gve_clean_rx_done(struct gve_rx_ring *rx, int budget, rx->q_num, GVE_SEQNO(desc->flags_seq), rx->desc.seqno); bytes += be16_to_cpu(desc->len) - GVE_RX_PAD; - if (!gve_rx(rx, desc, feat)) + if (!gve_rx(rx, desc, feat, idx)) gve_schedule_reset(priv); cnt++; - idx = cnt & rx->desc.mask; + idx = cnt & rx->mask; desc = rx->desc.desc_ring + idx; rx->desc.seqno = gve_next_seqno(rx->desc.seqno); work_done++; @@ -417,8 +413,8 @@ bool gve_clean_rx_done(struct gve_rx_ring *rx, int budget, rx->rpackets += work_done; rx->rbytes += bytes; u64_stats_update_end(&rx->statss); - rx->desc.cnt = cnt; - rx->desc.fill_cnt += work_done; + rx->cnt = cnt; + rx->fill_cnt += work_done; /* restock desc ring slots */ dma_wmb(); /* Ensure descs are visible before ringing doorbell */ -- cgit From f9cedf1a9b1cdcfb0c52edb391d01771e43994a4 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Fri, 2 Aug 2019 10:16:38 +0200 Subject: net/smc: do not schedule tx_work in SMC_CLOSED state The setsockopts options TCP_NODELAY and TCP_CORK may schedule the tx worker. Make sure the socket is not yet moved into SMC_CLOSED state (for instance by a shutdown SHUT_RDWR call). Reported-by: syzbot+92209502e7aab127c75f@syzkaller.appspotmail.com Reported-by: syzbot+b972214bb803a343f4fe@syzkaller.appspotmail.com Fixes: 01d2f7e2cdd31 ("net/smc: sockopts TCP_NODELAY and TCP_CORK") Signed-off-by: Ursula Braun Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/af_smc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index 302e355f2ebc..f5ea09258ab0 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -1732,14 +1732,18 @@ static int smc_setsockopt(struct socket *sock, int level, int optname, } break; case TCP_NODELAY: - if (sk->sk_state != SMC_INIT && sk->sk_state != SMC_LISTEN) { + if (sk->sk_state != SMC_INIT && + sk->sk_state != SMC_LISTEN && + sk->sk_state != SMC_CLOSED) { if (val && !smc->use_fallback) mod_delayed_work(system_wq, &smc->conn.tx_work, 0); } break; case TCP_CORK: - if (sk->sk_state != SMC_INIT && sk->sk_state != SMC_LISTEN) { + if (sk->sk_state != SMC_INIT && + sk->sk_state != SMC_LISTEN && + sk->sk_state != SMC_CLOSED) { if (!val && !smc->use_fallback) mod_delayed_work(system_wq, &smc->conn.tx_work, 0); -- cgit From cd2063604ea6a8c2683b4eb9b5f4c4da74592d87 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Fri, 2 Aug 2019 10:47:50 +0200 Subject: net/smc: avoid fallback in case of non-blocking connect FASTOPEN is not possible with SMC. sendmsg() with msg_flag MSG_FASTOPEN triggers a fallback to TCP if the socket is in state SMC_INIT. But if a nonblocking connect is already started, fallback to TCP is no longer possible, even though the socket may still be in state SMC_INIT. And if a nonblocking connect is already started, a listen() call does not make sense. Reported-by: syzbot+bd8cc73d665590a1fcad@syzkaller.appspotmail.com Fixes: 50717a37db032 ("net/smc: nonblocking connect rework") Signed-off-by: Ursula Braun Signed-off-by: Karsten Graul Signed-off-by: David S. Miller --- net/smc/af_smc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c index f5ea09258ab0..5b932583e407 100644 --- a/net/smc/af_smc.c +++ b/net/smc/af_smc.c @@ -263,7 +263,7 @@ static int smc_bind(struct socket *sock, struct sockaddr *uaddr, /* Check if socket is already active */ rc = -EINVAL; - if (sk->sk_state != SMC_INIT) + if (sk->sk_state != SMC_INIT || smc->connect_nonblock) goto out_rel; smc->clcsock->sk->sk_reuse = sk->sk_reuse; @@ -1390,7 +1390,8 @@ static int smc_listen(struct socket *sock, int backlog) lock_sock(sk); rc = -EINVAL; - if ((sk->sk_state != SMC_INIT) && (sk->sk_state != SMC_LISTEN)) + if ((sk->sk_state != SMC_INIT && sk->sk_state != SMC_LISTEN) || + smc->connect_nonblock) goto out; rc = 0; @@ -1518,7 +1519,7 @@ static int smc_sendmsg(struct socket *sock, struct msghdr *msg, size_t len) goto out; if (msg->msg_flags & MSG_FASTOPEN) { - if (sk->sk_state == SMC_INIT) { + if (sk->sk_state == SMC_INIT && !smc->connect_nonblock) { smc_switch_to_fallback(smc); smc->fallback_rsn = SMC_CLC_DECL_OPTUNSUPP; } else { -- cgit From d934423ac26ed373dfe089734d505dca5ff679b6 Mon Sep 17 00:00:00 2001 From: "Arnaud Patard (Rtp)" Date: Fri, 2 Aug 2019 10:32:40 +0200 Subject: drivers/net/ethernet/marvell/mvmdio.c: Fix non OF case Orion5.x systems are still using machine files and not device-tree. Commit 96cb4342382290c9 ("net: mvmdio: allow up to three clocks to be specified for orion-mdio") has replaced devm_clk_get() with of_clk_get(), leading to a oops at boot and not working network, as reported in https://lists.debian.org/debian-arm/2019/07/msg00088.html and possibly in https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908712. Link: https://lists.debian.org/debian-arm/2019/07/msg00088.html Fixes: 96cb4342382290c9 ("net: mvmdio: allow up to three clocks to be specified for orion-mdio") Signed-off-by: Arnaud Patard Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mvmdio.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c index f660cc2b8258..0b9e851f3da4 100644 --- a/drivers/net/ethernet/marvell/mvmdio.c +++ b/drivers/net/ethernet/marvell/mvmdio.c @@ -319,20 +319,33 @@ static int orion_mdio_probe(struct platform_device *pdev) init_waitqueue_head(&dev->smi_busy_wait); - for (i = 0; i < ARRAY_SIZE(dev->clk); i++) { - dev->clk[i] = of_clk_get(pdev->dev.of_node, i); - if (PTR_ERR(dev->clk[i]) == -EPROBE_DEFER) { + if (pdev->dev.of_node) { + for (i = 0; i < ARRAY_SIZE(dev->clk); i++) { + dev->clk[i] = of_clk_get(pdev->dev.of_node, i); + if (PTR_ERR(dev->clk[i]) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto out_clk; + } + if (IS_ERR(dev->clk[i])) + break; + clk_prepare_enable(dev->clk[i]); + } + + if (!IS_ERR(of_clk_get(pdev->dev.of_node, + ARRAY_SIZE(dev->clk)))) + dev_warn(&pdev->dev, + "unsupported number of clocks, limiting to the first " + __stringify(ARRAY_SIZE(dev->clk)) "\n"); + } else { + dev->clk[0] = clk_get(&pdev->dev, NULL); + if (PTR_ERR(dev->clk[0]) == -EPROBE_DEFER) { ret = -EPROBE_DEFER; goto out_clk; } - if (IS_ERR(dev->clk[i])) - break; - clk_prepare_enable(dev->clk[i]); + if (!IS_ERR(dev->clk[0])) + clk_prepare_enable(dev->clk[0]); } - if (!IS_ERR(of_clk_get(pdev->dev.of_node, ARRAY_SIZE(dev->clk)))) - dev_warn(&pdev->dev, "unsupported number of clocks, limiting to the first " - __stringify(ARRAY_SIZE(dev->clk)) "\n"); dev->err_interrupt = platform_get_irq(pdev, 0); if (dev->err_interrupt > 0 && -- cgit From 091adf9ba6cdb432cbcc217b47e4ffb8aa0d8865 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Fri, 2 Aug 2019 13:57:36 +0300 Subject: net: bridge: move default pvid init/deinit to NETDEV_REGISTER/UNREGISTER Most of the bridge device's vlan init bugs come from the fact that its default pvid is created at the wrong time, way too early in ndo_init() before the device is even assigned an ifindex. It introduces a bug when the bridge's dev_addr is added as fdb during the initial default pvid creation the notification has ifindex/NDA_MASTER both equal to 0 (see example below) which really makes no sense for user-space[0] and is wrong. Usually user-space software would ignore such entries, but they are actually valid and will eventually have all necessary attributes. It makes much more sense to send a notification *after* the device has registered and has a proper ifindex allocated rather than before when there's a chance that the registration might still fail or to receive it with ifindex/NDA_MASTER == 0. Note that we can remove the fdb flush from br_vlan_flush() since that case can no longer happen. At NETDEV_REGISTER br->default_pvid is always == 1 as it's initialized by br_vlan_init() before that and at NETDEV_UNREGISTER it can be anything depending why it was called (if called due to NETDEV_REGISTER error it'll still be == 1, otherwise it could be any value changed during the device life time). For the demonstration below a small change to iproute2 for printing all fdb notifications is added, because it contained a workaround not to show entries with ifindex == 0. Command executed while monitoring: $ ip l add br0 type bridge Before (both ifindex and master == 0): $ bridge monitor fdb 36:7e:8a:b3:56:ba dev * vlan 1 master * permanent After (proper br0 ifindex): $ bridge monitor fdb e6:2a:ae:7a:b7:48 dev br0 vlan 1 master br0 permanent v4: move only the default pvid init/deinit to NETDEV_REGISTER/UNREGISTER v3: send the correct v2 patch with all changes (stub should return 0) v2: on error in br_vlan_init set br->vlgrp to NULL and return 0 in the br_vlan_bridge_event stub when bridge vlans are disabled [0] https://bugzilla.kernel.org/show_bug.cgi?id=204389 Reported-by: michael-dev Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid") Signed-off-by: Nikolay Aleksandrov Acked-by: Roopa Prabhu Signed-off-by: David S. Miller --- net/bridge/br.c | 5 ++++- net/bridge/br_private.h | 9 +++++---- net/bridge/br_vlan.c | 34 ++++++++++++++++------------------ 3 files changed, 25 insertions(+), 23 deletions(-) diff --git a/net/bridge/br.c b/net/bridge/br.c index d164f63a4345..8a8f9e5f264f 100644 --- a/net/bridge/br.c +++ b/net/bridge/br.c @@ -37,12 +37,15 @@ static int br_device_event(struct notifier_block *unused, unsigned long event, v int err; if (dev->priv_flags & IFF_EBRIDGE) { + err = br_vlan_bridge_event(dev, event, ptr); + if (err) + return notifier_from_errno(err); + if (event == NETDEV_REGISTER) { /* register of bridge completed, add sysfs entries */ br_sysfs_addbr(dev); return NOTIFY_DONE; } - br_vlan_bridge_event(dev, event, ptr); } /* not a port of a bridge */ diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index e8cf03b43b7d..646504db0220 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -894,8 +894,8 @@ int nbp_get_num_vlan_infos(struct net_bridge_port *p, u32 filter_mask); void br_vlan_get_stats(const struct net_bridge_vlan *v, struct br_vlan_stats *stats); void br_vlan_port_event(struct net_bridge_port *p, unsigned long event); -void br_vlan_bridge_event(struct net_device *dev, unsigned long event, - void *ptr); +int br_vlan_bridge_event(struct net_device *dev, unsigned long event, + void *ptr); static inline struct net_bridge_vlan_group *br_vlan_group( const struct net_bridge *br) @@ -1085,9 +1085,10 @@ static inline void br_vlan_port_event(struct net_bridge_port *p, { } -static inline void br_vlan_bridge_event(struct net_device *dev, - unsigned long event, void *ptr) +static inline int br_vlan_bridge_event(struct net_device *dev, + unsigned long event, void *ptr) { + return 0; } #endif diff --git a/net/bridge/br_vlan.c b/net/bridge/br_vlan.c index a544e161c7fa..f5b2aeebbfe9 100644 --- a/net/bridge/br_vlan.c +++ b/net/bridge/br_vlan.c @@ -715,11 +715,6 @@ void br_vlan_flush(struct net_bridge *br) ASSERT_RTNL(); - /* delete auto-added default pvid local fdb before flushing vlans - * otherwise it will be leaked on bridge device init failure - */ - br_fdb_delete_by_port(br, NULL, 0, 1); - vg = br_vlan_group(br); __vlan_flush(vg); RCU_INIT_POINTER(br->vlgrp, NULL); @@ -1058,7 +1053,6 @@ int br_vlan_init(struct net_bridge *br) { struct net_bridge_vlan_group *vg; int ret = -ENOMEM; - bool changed; vg = kzalloc(sizeof(*vg), GFP_KERNEL); if (!vg) @@ -1073,17 +1067,10 @@ int br_vlan_init(struct net_bridge *br) br->vlan_proto = htons(ETH_P_8021Q); br->default_pvid = 1; rcu_assign_pointer(br->vlgrp, vg); - ret = br_vlan_add(br, 1, - BRIDGE_VLAN_INFO_PVID | BRIDGE_VLAN_INFO_UNTAGGED | - BRIDGE_VLAN_INFO_BRENTRY, &changed, NULL); - if (ret) - goto err_vlan_add; out: return ret; -err_vlan_add: - vlan_tunnel_deinit(vg); err_tunnel_init: rhashtable_destroy(&vg->vlan_hash); err_rhtbl: @@ -1469,13 +1456,23 @@ static void nbp_vlan_set_vlan_dev_state(struct net_bridge_port *p, u16 vid) } /* Must be protected by RTNL. */ -void br_vlan_bridge_event(struct net_device *dev, unsigned long event, - void *ptr) +int br_vlan_bridge_event(struct net_device *dev, unsigned long event, void *ptr) { struct netdev_notifier_changeupper_info *info; - struct net_bridge *br; + struct net_bridge *br = netdev_priv(dev); + bool changed; + int ret = 0; switch (event) { + case NETDEV_REGISTER: + ret = br_vlan_add(br, br->default_pvid, + BRIDGE_VLAN_INFO_PVID | + BRIDGE_VLAN_INFO_UNTAGGED | + BRIDGE_VLAN_INFO_BRENTRY, &changed, NULL); + break; + case NETDEV_UNREGISTER: + br_vlan_delete(br, br->default_pvid); + break; case NETDEV_CHANGEUPPER: info = ptr; br_vlan_upper_change(dev, info->upper_dev, info->linking); @@ -1483,12 +1480,13 @@ void br_vlan_bridge_event(struct net_device *dev, unsigned long event, case NETDEV_CHANGE: case NETDEV_UP: - br = netdev_priv(dev); if (!br_opt_get(br, BROPT_VLAN_BRIDGE_BINDING)) - return; + break; br_vlan_link_state_change(dev, br); break; } + + return ret; } /* Must be protected by RTNL. */ -- cgit From d75996dd022b6d83bd14af59b2775b1aa639e4b9 Mon Sep 17 00:00:00 2001 From: Vivek Goyal Date: Fri, 2 Aug 2019 15:29:56 -0400 Subject: dax: dax_layout_busy_page() should not unmap cow pages Vivek: "As of now dax_layout_busy_page() calls unmap_mapping_range() with last argument as 1, which says even unmap cow pages. I am wondering who needs to get rid of cow pages as well. I noticed one interesting side affect of this. I mount xfs with -o dax and mmaped a file with MAP_PRIVATE and wrote some data to a page which created cow page. Then I called fallocate() on that file to zero a page of file. fallocate() called dax_layout_busy_page() which unmapped cow pages as well and then I tried to read back the data I wrote and what I get is old data from persistent memory. I lost the data I had written. This read basically resulted in new fault and read back the data from persistent memory. This sounds wrong. Are there any users which need to unmap cow pages as well? If not, I am proposing changing it to not unmap cow pages. I noticed this while while writing virtio_fs code where when I tried to reclaim a memory range and that corrupted the executable and I was running from virtio-fs and program got segment violation." Dan: "In fact the unmap_mapping_range() in this path is only to synchronize against get_user_pages_fast() and force it to call back into the filesystem to re-establish the mapping. COW pages should be left untouched by dax_layout_busy_page()." Cc: Fixes: 5fac7408d828 ("mm, fs, dax: handle layout changes to pinned dax mappings") Signed-off-by: Vivek Goyal Link: https://lore.kernel.org/r/20190802192956.GA3032@redhat.com Signed-off-by: Dan Williams --- fs/dax.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/dax.c b/fs/dax.c index b64964ef44f6..6bf81f931de3 100644 --- a/fs/dax.c +++ b/fs/dax.c @@ -600,7 +600,7 @@ struct page *dax_layout_busy_page(struct address_space *mapping) * guaranteed to either see new references or prevent new * references from being established. */ - unmap_mapping_range(mapping, 0, 0, 1); + unmap_mapping_range(mapping, 0, 0, 0); xas_lock_irq(&xas); xas_for_each(&xas, entry, ULONG_MAX) { -- cgit From 74034a09267c1f48d5ce7ae4c4a317fac7d43418 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 5 Aug 2019 13:55:33 -0500 Subject: MIPS: BCM63XX: Mark expected switch fall-through MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: bcm63xx_defconfig mips): arch/mips/pci/ops-bcm63xx.c: In function ‘bcm63xx_pcie_can_access’: arch/mips/pci/ops-bcm63xx.c:474:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (PCI_SLOT(devfn) == 0) ^ arch/mips/pci/ops-bcm63xx.c:477:2: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: Florian Fainelli Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-mips@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- arch/mips/pci/ops-bcm63xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c index d02eb9d16b55..925c72348fb6 100644 --- a/arch/mips/pci/ops-bcm63xx.c +++ b/arch/mips/pci/ops-bcm63xx.c @@ -474,6 +474,7 @@ static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn) if (PCI_SLOT(devfn) == 0) return bcm_pcie_readl(PCIE_DLSTATUS_REG) & DLSTATUS_PHYLINKUP; + /* else, fall through */ default: return false; } -- cgit From e99c63e4d86d3a94818693147b469fa70de6f945 Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Mon, 22 Jul 2019 11:34:59 -0700 Subject: SMB3: Fix deadlock in validate negotiate hits reconnect Currently we skip SMB2_TREE_CONNECT command when checking during reconnect because Tree Connect happens when establishing an SMB session. For SMB 3.0 protocol version the code also calls validate negotiate which results in SMB2_IOCL command being sent over the wire. This may deadlock on trying to acquire a mutex when checking for reconnect. Fix this by skipping SMB2_IOCL command when doing the reconnect check. Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French Reviewed-by: Ronnie Sahlberg CC: Stable --- fs/cifs/smb2pdu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index c8cd7b6cdda2..33efc5fb293c 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -252,7 +252,7 @@ smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon) if (tcon == NULL) return 0; - if (smb2_command == SMB2_TREE_CONNECT) + if (smb2_command == SMB2_TREE_CONNECT || smb2_command == SMB2_IOCTL) return 0; if (tcon->tidStatus == CifsExiting) { -- cgit From 3edeb4a4146dc3b54d6fa71b7ee0585cb52ebfdf Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Mon, 22 Jul 2019 11:38:22 -0700 Subject: SMB3: Fix potential memory leak when processing compound chain When a reconnect happens in the middle of processing a compound chain the code leaks a buffer from the memory pool. Fix this by properly checking for a return code and freeing buffers in case of error. Also maintain a buf variable to be equal to either smallbuf or bigbuf depending on a response buffer size while parsing a chain and when returning to the caller. Signed-off-by: Pavel Shilovsky Reviewed-by: Ronnie Sahlberg Signed-off-by: Steve French --- fs/cifs/smb2ops.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-) diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index a5bc1b671c12..19589922ef2b 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -4070,7 +4070,6 @@ receive_encrypted_standard(struct TCP_Server_Info *server, { int ret, length; char *buf = server->smallbuf; - char *tmpbuf; struct smb2_sync_hdr *shdr; unsigned int pdu_length = server->pdu_size; unsigned int buf_size; @@ -4100,18 +4099,15 @@ receive_encrypted_standard(struct TCP_Server_Info *server, return length; next_is_large = server->large_buf; - one_more: +one_more: shdr = (struct smb2_sync_hdr *)buf; if (shdr->NextCommand) { - if (next_is_large) { - tmpbuf = server->bigbuf; + if (next_is_large) next_buffer = (char *)cifs_buf_get(); - } else { - tmpbuf = server->smallbuf; + else next_buffer = (char *)cifs_small_buf_get(); - } memcpy(next_buffer, - tmpbuf + le32_to_cpu(shdr->NextCommand), + buf + le32_to_cpu(shdr->NextCommand), pdu_length - le32_to_cpu(shdr->NextCommand)); } @@ -4140,12 +4136,21 @@ receive_encrypted_standard(struct TCP_Server_Info *server, pdu_length -= le32_to_cpu(shdr->NextCommand); server->large_buf = next_is_large; if (next_is_large) - server->bigbuf = next_buffer; + server->bigbuf = buf = next_buffer; else - server->smallbuf = next_buffer; - - buf += le32_to_cpu(shdr->NextCommand); + server->smallbuf = buf = next_buffer; goto one_more; + } else if (ret != 0) { + /* + * ret != 0 here means that we didn't get to handle_mid() thus + * server->smallbuf and server->bigbuf are still valid. We need + * to free next_buffer because it is not going to be used + * anywhere. + */ + if (next_is_large) + free_rsp_buf(CIFS_LARGE_BUFFER, next_buffer); + else + free_rsp_buf(CIFS_SMALL_BUFFER, next_buffer); } return ret; -- cgit From 8d33096a460d5b9bd13300f01615df5bb454db10 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 25 Jul 2019 18:13:10 -0500 Subject: smb3: send CAP_DFS capability during session setup We had a report of a server which did not do a DFS referral because the session setup Capabilities field was set to 0 (unlike negotiate protocol where we set CAP_DFS). Better to send it session setup in the capabilities as well (this also more closely matches Windows client behavior). Signed-off-by: Steve French Reviewed-off-by: Ronnie Sahlberg Reviewed-by: Pavel Shilovsky CC: Stable --- fs/cifs/smb2pdu.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 33efc5fb293c..31e4a1b0b170 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -1196,7 +1196,12 @@ SMB2_sess_alloc_buffer(struct SMB2_sess_data *sess_data) else req->SecurityMode = 0; +#ifdef CONFIG_CIFS_DFS_UPCALL + req->Capabilities = cpu_to_le32(SMB2_GLOBAL_CAP_DFS); +#else req->Capabilities = 0; +#endif /* DFS_UPCALL */ + req->Channel = 0; /* MBZ */ sess_data->iov[0].iov_base = (char *)req; -- cgit From 108624eaff6f17f1966e4a94dc7bc5df2c5115ee Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 31 Jul 2019 16:41:03 -0500 Subject: smb3: update TODO list of missing features minor cleanup of documentation, updating to more current status. Signed-off-by: Steve French --- Documentation/filesystems/cifs/TODO | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-) diff --git a/Documentation/filesystems/cifs/TODO b/Documentation/filesystems/cifs/TODO index 9267f3fb131f..edbbccda1942 100644 --- a/Documentation/filesystems/cifs/TODO +++ b/Documentation/filesystems/cifs/TODO @@ -13,7 +13,8 @@ a) SMB3 (and SMB3.1.1) missing optional features: - T10 copy offload ie "ODX" (copy chunk, and "Duplicate Extents" ioctl currently the only two server side copy mechanisms supported) -b) improved sparse file support +b) improved sparse file support (fiemap and SEEK_HOLE are implemented +but additional features would be supportable by the protocol). c) Directory entry caching relies on a 1 second timer, rather than using Directory Leases, currently only the root file handle is cached longer @@ -21,9 +22,13 @@ using Directory Leases, currently only the root file handle is cached longer d) quota support (needs minor kernel change since quota calls to make it to network filesystems or deviceless filesystems) -e) Additional use cases where we use "compoounding" (e.g. open/query/close -and open/setinfo/close) to reduce the number of roundtrips, and also -open to reduce redundant opens (using deferred close and reference counts more). +e) Additional use cases can be optimized to use "compounding" +(e.g. open/query/close and open/setinfo/close) to reduce the number +of roundtrips to the server and improve performance. Various cases +(stat, statfs, create, unlink, mkdir) already have been improved by +using compounding but more can be done. In addition we could significantly +reduce redundant opens by using deferred close (with handle caching leases) +and better using reference counters on file handles. f) Finish inotify support so kde and gnome file list windows will autorefresh (partially complete by Asser). Needs minor kernel @@ -43,18 +48,17 @@ mount or a per server basis to client UIDs or nobody if no mapping exists. Also better integration with winbind for resolving SID owners k) Add tools to take advantage of more smb3 specific ioctls and features -(passthrough ioctl/fsctl for sending various SMB3 fsctls to the server -is in progress, and a passthrough query_info call is already implemented -in cifs.ko to allow smb3 info levels queries to be sent from userspace) +(passthrough ioctl/fsctl is now implemented in cifs.ko to allow sending +various SMB3 fsctls and query info and set info calls directly from user space) +Add tools to make setting various non-POSIX metadata attributes easier +from tools (e.g. extending what was done in smb-info tool). l) encrypted file support m) improved stats gathering tools (perhaps integration with nfsometer?) to extend and make easier to use what is currently in /proc/fs/cifs/Stats -n) allow setting more NTFS/SMB3 file attributes remotely (currently limited to compressed -file attribute via chflags) and improve user space tools for managing and -viewing them. +n) Add support for claims based ACLs ("DAC") o) mount helper GUI (to simplify the various configuration options on mount) @@ -82,6 +86,8 @@ so far). w) Add support for additional strong encryption types, and additional spnego authentication mechanisms (see MS-SMB2) +x) Finish support for SMB3.1.1 compression + KNOWN BUGS ==================================== See http://bugzilla.samba.org - search on product "CifsVFS" for -- cgit From ee9d66182392695535cc9fccfcb40c16f72de2a9 Mon Sep 17 00:00:00 2001 From: Sebastien Tisserant Date: Thu, 1 Aug 2019 12:06:08 -0500 Subject: SMB3: Kernel oops mounting a encryptData share with CONFIG_DEBUG_VIRTUAL Fix kernel oops when mounting a encryptData CIFS share with CONFIG_DEBUG_VIRTUAL Signed-off-by: Sebastien Tisserant Reviewed-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/smb2ops.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index 19589922ef2b..64a5864127be 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -3489,7 +3489,15 @@ fill_transform_hdr(struct smb2_transform_hdr *tr_hdr, unsigned int orig_len, static inline void smb2_sg_set_buf(struct scatterlist *sg, const void *buf, unsigned int buflen) { - sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf)); + void *addr; + /* + * VMAP_STACK (at least) puts stack into the vmalloc address space + */ + if (is_vmalloc_addr(buf)) + addr = vmalloc_to_page(buf); + else + addr = virt_to_page(buf); + sg_set_page(sg, addr, buflen, offset_in_page(buf)); } /* Assumes the first rqst has a transform header as the first iov. -- cgit From 7c0767643f3b6b0dd2cda923ae37a18590d431cf Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 6 Aug 2019 11:15:06 +0100 Subject: ASoC: max98373: Remove executable bits Signed-off-by: Mark Brown --- sound/soc/codecs/max98373.c | 0 sound/soc/codecs/max98373.h | 0 2 files changed, 0 insertions(+), 0 deletions(-) mode change 100755 => 100644 sound/soc/codecs/max98373.c mode change 100755 => 100644 sound/soc/codecs/max98373.h diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c old mode 100755 new mode 100644 diff --git a/sound/soc/codecs/max98373.h b/sound/soc/codecs/max98373.h old mode 100755 new mode 100644 -- cgit From 9c09b214f30e3c11f9b0b03f89442df03643794d Mon Sep 17 00:00:00 2001 From: Hillf Danton Date: Tue, 6 Aug 2019 16:38:58 +0800 Subject: HID: hiddev: avoid opening a disconnected device syzbot found the following crash on: HEAD commit: e96407b4 usb-fuzzer: main usb gadget fuzzer driver git tree: https://github.com/google/kasan.git usb-fuzzer console output: https://syzkaller.appspot.com/x/log.txt?x=147ac20c600000 kernel config: https://syzkaller.appspot.com/x/.config?x=792eb47789f57810 dashboard link: https://syzkaller.appspot.com/bug?extid=62a1e04fd3ec2abf099e compiler: gcc (GCC) 9.0.0 20181231 (experimental) ================================================================== BUG: KASAN: use-after-free in __lock_acquire+0x302a/0x3b50 kernel/locking/lockdep.c:3753 Read of size 8 at addr ffff8881cf591a08 by task syz-executor.1/26260 CPU: 1 PID: 26260 Comm: syz-executor.1 Not tainted 5.3.0-rc2+ #24 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6a/0x32c mm/kasan/report.c:351 __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482 kasan_report+0xe/0x12 mm/kasan/common.c:612 __lock_acquire+0x302a/0x3b50 kernel/locking/lockdep.c:3753 lock_acquire+0x127/0x320 kernel/locking/lockdep.c:4412 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x32/0x50 kernel/locking/spinlock.c:159 hiddev_release+0x82/0x520 drivers/hid/usbhid/hiddev.c:221 __fput+0x2d7/0x840 fs/file_table.c:280 task_work_run+0x13f/0x1c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x8ef/0x2c50 kernel/exit.c:878 do_group_exit+0x125/0x340 kernel/exit.c:982 get_signal+0x466/0x23d0 kernel/signal.c:2728 do_signal+0x88/0x14e0 arch/x86/kernel/signal.c:815 exit_to_usermode_loop+0x1a2/0x200 arch/x86/entry/common.c:159 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x459829 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f75b2a6ccf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 000000000075c078 RCX: 0000000000459829 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 000000000075c078 RBP: 000000000075c070 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000075c07c R13: 00007ffcdfe1023f R14: 00007f75b2a6d9c0 R15: 000000000075c07c Allocated by task 104: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc mm/kasan/common.c:487 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:748 [inline] hiddev_connect+0x242/0x5b0 drivers/hid/usbhid/hiddev.c:900 hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882 hid_hw_start drivers/hid/hid-core.c:1981 [inline] hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972 appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308 hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365 usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023 generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210 usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536 hub_port_connect drivers/usb/core/hub.c:5098 [inline] hub_port_connect_change drivers/usb/core/hub.c:5213 [inline] port_event drivers/usb/core/hub.c:5359 [inline] hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441 process_one_work+0x92b/0x1530 kernel/workqueue.c:2269 worker_thread+0x96/0xe20 kernel/workqueue.c:2415 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Freed by task 104: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1470 [inline] slab_free mm/slub.c:3012 [inline] kfree+0xe4/0x2f0 mm/slub.c:3953 hiddev_connect.cold+0x45/0x5c drivers/hid/usbhid/hiddev.c:914 hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882 hid_hw_start drivers/hid/hid-core.c:1981 [inline] hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972 appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308 hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365 usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023 generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210 usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536 hub_port_connect drivers/usb/core/hub.c:5098 [inline] hub_port_connect_change drivers/usb/core/hub.c:5213 [inline] port_event drivers/usb/core/hub.c:5359 [inline] hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441 process_one_work+0x92b/0x1530 kernel/workqueue.c:2269 worker_thread+0x96/0xe20 kernel/workqueue.c:2415 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 The buggy address belongs to the object at ffff8881cf591900 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 264 bytes inside of 512-byte region [ffff8881cf591900, ffff8881cf591b00) The buggy address belongs to the page: page:ffffea00073d6400 refcount:1 mapcount:0 mapping:ffff8881da002500 index:0x0 compound_mapcount: 0 flags: 0x200000000010200(slab|head) raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da002500 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881cf591900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881cf591980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff8881cf591a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881cf591a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881cf591b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== In order to avoid opening a disconnected device, we need to check exist again after acquiring the existance lock, and bail out if necessary. Reported-by: syzbot Cc: Andrey Konovalov Signed-off-by: Hillf Danton Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index 55b72573066b..c07df8292380 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -284,6 +284,14 @@ static int hiddev_open(struct inode *inode, struct file *file) spin_unlock_irq(&list->hiddev->list_lock); mutex_lock(&hiddev->existancelock); + /* + * recheck exist with existance lock held to + * avoid opening a disconnected device + */ + if (!list->hiddev->exist) { + res = -ENODEV; + goto bail_unlock; + } if (!list->hiddev->open++) if (list->hiddev->exist) { struct hid_device *hid = hiddev->hid; -- cgit From 6d4472d7bec39917b54e4e80245784ea5d60ce49 Mon Sep 17 00:00:00 2001 From: Hillf Danton Date: Tue, 6 Aug 2019 16:40:15 +0800 Subject: HID: hiddev: do cleanup in failure of opening a device Undo what we did for opening before releasing the memory slice. Reported-by: syzbot Cc: Andrey Konovalov Signed-off-by: Hillf Danton Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index c07df8292380..4e11cc6fc34b 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -308,6 +308,10 @@ bail_normal_power: hid_hw_power(hid, PM_HINT_NORMAL); bail_unlock: mutex_unlock(&hiddev->existancelock); + + spin_lock_irq(&list->hiddev->list_lock); + list_del(&list->node); + spin_unlock_irq(&list->hiddev->list_lock); bail: file->private_data = NULL; vfree(list); -- cgit From a67060201b746a308b1674f66bf289c9faef6d09 Mon Sep 17 00:00:00 2001 From: Wenwen Wang Date: Tue, 6 Aug 2019 03:00:27 -0400 Subject: ALSA: usb-audio: fix a memory leak bug In snd_usb_get_audioformat_uac3(), a structure for channel maps 'chmap' is allocated through kzalloc() before the execution goto 'found_clock'. However, this structure is not deallocated if the memory allocation for 'pd' fails, leading to a memory leak bug. To fix the above issue, free 'fp->chmap' before returning NULL. Fixes: 7edf3b5e6a45 ("ALSA: usb-audio: AudioStreaming Power Domain parsing") Signed-off-by: Wenwen Wang Cc: Signed-off-by: Takashi Iwai --- sound/usb/stream.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/stream.c b/sound/usb/stream.c index 7ee9d17d0143..e852c7fd6109 100644 --- a/sound/usb/stream.c +++ b/sound/usb/stream.c @@ -1043,6 +1043,7 @@ found_clock: pd = kzalloc(sizeof(*pd), GFP_KERNEL); if (!pd) { + kfree(fp->chmap); kfree(fp->rate_table); kfree(fp); return NULL; -- cgit From e0f6974a54d3f7f1b5fdf5a593bd43ce9206ec04 Mon Sep 17 00:00:00 2001 From: Roderick Colenbrander Date: Fri, 2 Aug 2019 15:50:19 -0700 Subject: HID: sony: Fix race condition between rumble and device remove. Valve reported a kernel crash on Ubuntu 18.04 when disconnecting a DS4 gamepad while rumble is enabled. This issue is reproducible with a frequency of 1 in 3 times in the game Borderlands 2 when using an automatic weapon, which triggers many rumble operations. We found the issue to be a race condition between sony_remove and the final device destruction by the HID / input system. The problem was that sony_remove didn't clean some of its work_item state in "struct sony_sc". After sony_remove work, the corresponding evdev node was around for sufficient time for applications to still queue rumble work after "sony_remove". On pre-4.19 kernels the race condition caused a kernel crash due to a NULL-pointer dereference as "sc->output_report_dmabuf" got freed during sony_remove. On newer kernels this crash doesn't happen due the buffer now being allocated using devm_kzalloc. However we can still queue work, while the driver is an undefined state. This patch fixes the described problem, by guarding the work_item "state_worker" with an initialized variable, which we are setting back to 0 on cleanup. Signed-off-by: Roderick Colenbrander CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/hid-sony.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c index 93942063b51b..49dd2d905c7f 100644 --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -585,10 +585,14 @@ static void sony_set_leds(struct sony_sc *sc); static inline void sony_schedule_work(struct sony_sc *sc, enum sony_worker which) { + unsigned long flags; + switch (which) { case SONY_WORKER_STATE: - if (!sc->defer_initialization) + spin_lock_irqsave(&sc->lock, flags); + if (!sc->defer_initialization && sc->state_worker_initialized) schedule_work(&sc->state_worker); + spin_unlock_irqrestore(&sc->lock, flags); break; case SONY_WORKER_HOTPLUG: if (sc->hotplug_worker_initialized) @@ -2558,13 +2562,18 @@ static inline void sony_init_output_report(struct sony_sc *sc, static inline void sony_cancel_work_sync(struct sony_sc *sc) { + unsigned long flags; + if (sc->hotplug_worker_initialized) cancel_work_sync(&sc->hotplug_worker); - if (sc->state_worker_initialized) + if (sc->state_worker_initialized) { + spin_lock_irqsave(&sc->lock, flags); + sc->state_worker_initialized = 0; + spin_unlock_irqrestore(&sc->lock, flags); cancel_work_sync(&sc->state_worker); + } } - static int sony_input_configured(struct hid_device *hdev, struct hid_input *hidinput) { -- cgit From f4904815f97a934258445a8f763f6b6c48f007e7 Mon Sep 17 00:00:00 2001 From: Dietmar Eggemann Date: Fri, 2 Aug 2019 15:59:43 +0100 Subject: sched/deadline: Fix double accounting of rq/running bw in push & pull {push,pull}_dl_task() always calls {de,}activate_task() with .flags=0 which sets p->on_rq=TASK_ON_RQ_MIGRATING. {push,pull}_dl_task()->{de,}activate_task()->{de,en}queue_task()-> {de,en}queue_task_dl() calls {sub,add}_{running,rq}_bw() since p->on_rq==TASK_ON_RQ_MIGRATING. So {sub,add}_{running,rq}_bw() in {push,pull}_dl_task() is double-accounting for that task. Fix it by removing rq/running bw accounting in [push/pull]_dl_task(). Fixes: 7dd778841164 ("sched/core: Unify p->on_rq updates") Signed-off-by: Dietmar Eggemann Signed-off-by: Peter Zijlstra (Intel) Cc: Valentin Schneider Cc: Ingo Molnar Cc: Luca Abeni Cc: Daniel Bristot de Oliveira Cc: Juri Lelli Cc: Qais Yousef Link: https://lkml.kernel.org/r/20190802145945.18702-2-dietmar.eggemann@arm.com --- kernel/sched/deadline.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/kernel/sched/deadline.c b/kernel/sched/deadline.c index ef5b9f6b1d42..46122edd8552 100644 --- a/kernel/sched/deadline.c +++ b/kernel/sched/deadline.c @@ -2088,17 +2088,13 @@ retry: } deactivate_task(rq, next_task, 0); - sub_running_bw(&next_task->dl, &rq->dl); - sub_rq_bw(&next_task->dl, &rq->dl); set_task_cpu(next_task, later_rq->cpu); - add_rq_bw(&next_task->dl, &later_rq->dl); /* * Update the later_rq clock here, because the clock is used * by the cpufreq_update_util() inside __add_running_bw(). */ update_rq_clock(later_rq); - add_running_bw(&next_task->dl, &later_rq->dl); activate_task(later_rq, next_task, ENQUEUE_NOCLOCK); ret = 1; @@ -2186,11 +2182,7 @@ static void pull_dl_task(struct rq *this_rq) resched = true; deactivate_task(src_rq, p, 0); - sub_running_bw(&p->dl, &src_rq->dl); - sub_rq_bw(&p->dl, &src_rq->dl); set_task_cpu(p, this_cpu); - add_rq_bw(&p->dl, &this_rq->dl); - add_running_bw(&p->dl, &this_rq->dl); activate_task(this_rq, p, 0); dmin = p->dl.deadline; -- cgit From 14f5c7b46a41a595fc61db37f55721714729e59e Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 1 Aug 2019 12:41:31 +0200 Subject: sched/psi: Reduce psimon FIFO priority PSI defaults to a FIFO-99 thread, reduce this to FIFO-1. FIFO-99 is the very highest priority available to SCHED_FIFO and it not a suitable default; it would indicate the psi work is the most important work on the machine. Since Real-Time tasks will have pre-allocated memory and locked it in place, Real-Time tasks do not care about PSI. All it needs is to be above OTHER. Signed-off-by: Peter Zijlstra (Intel) Acked-by: Johannes Weiner Tested-by: Suren Baghdasaryan Cc: Thomas Gleixner --- kernel/sched/psi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/psi.c b/kernel/sched/psi.c index 7acc632c3b82..7fe2c5fd26b5 100644 --- a/kernel/sched/psi.c +++ b/kernel/sched/psi.c @@ -1051,7 +1051,7 @@ struct psi_trigger *psi_trigger_create(struct psi_group *group, if (!rcu_access_pointer(group->poll_kworker)) { struct sched_param param = { - .sched_priority = MAX_RT_PRIO - 1, + .sched_priority = 1, }; struct kthread_worker *kworker; -- cgit From 04e048cf09d7b5fc995817cdc5ae1acd4482429c Mon Sep 17 00:00:00 2001 From: Suren Baghdasaryan Date: Mon, 29 Jul 2019 18:33:10 -0700 Subject: sched/psi: Do not require setsched permission from the trigger creator When a process creates a new trigger by writing into /proc/pressure/* files, permissions to write such a file should be used to determine whether the process is allowed to do so or not. Current implementation would also require such a process to have setsched capability. Setting of psi trigger thread's scheduling policy is an implementation detail and should not be exposed to the user level. Remove the permission check by using _nocheck version of the function. Suggested-by: Nick Kralevich Signed-off-by: Suren Baghdasaryan Signed-off-by: Peter Zijlstra (Intel) Cc: lizefan@huawei.com Cc: mingo@redhat.com Cc: akpm@linux-foundation.org Cc: kernel-team@android.com Cc: dennisszhou@gmail.com Cc: dennis@kernel.org Cc: hannes@cmpxchg.org Cc: axboe@kernel.dk Link: https://lkml.kernel.org/r/20190730013310.162367-1-surenb@google.com --- kernel/sched/psi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/psi.c b/kernel/sched/psi.c index 7fe2c5fd26b5..23fbbcc414d5 100644 --- a/kernel/sched/psi.c +++ b/kernel/sched/psi.c @@ -1061,7 +1061,7 @@ struct psi_trigger *psi_trigger_create(struct psi_group *group, mutex_unlock(&group->trigger_lock); return ERR_CAST(kworker); } - sched_setscheduler(kworker->task, SCHED_FIFO, ¶m); + sched_setscheduler_nocheck(kworker->task, SCHED_FIFO, ¶m); kthread_init_delayed_work(&group->poll_work, psi_poll_work); rcu_assign_pointer(group->poll_kworker, kworker); -- cgit From a287a49e672d9762bb85de117b477bdf3ef20bd5 Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Fri, 2 Aug 2019 13:27:22 +0200 Subject: s390/protvirt: avoid memory sharing for diag 308 set/store This reverts commit db9492cef45e ("s390/protvirt: add memory sharing for diag 308 set/store") which due to ultravisor implementation change is not needed after all. Fixes: db9492cef45e ("s390/protvirt: add memory sharing for diag 308 set/store") Reviewed-by: Janosch Frank Signed-off-by: Vasily Gorbik --- arch/s390/boot/ipl_parm.c | 2 -- arch/s390/kernel/ipl.c | 9 --------- 2 files changed, 11 deletions(-) diff --git a/arch/s390/boot/ipl_parm.c b/arch/s390/boot/ipl_parm.c index 3c49bde8aa5e..b8aa6a9f937b 100644 --- a/arch/s390/boot/ipl_parm.c +++ b/arch/s390/boot/ipl_parm.c @@ -48,9 +48,7 @@ void store_ipl_parmblock(void) { int rc; - uv_set_shared(__pa(&ipl_block)); rc = __diag308(DIAG308_STORE, &ipl_block); - uv_remove_shared(__pa(&ipl_block)); if (rc == DIAG308_RC_OK && ipl_block.hdr.version <= IPL_MAX_SUPPORTED_VERSION) ipl_block_valid = 1; diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 2c0a515428d6..6837affc19e8 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -31,7 +31,6 @@ #include #include #include -#include #include "entry.h" #define IPL_PARM_BLOCK_VERSION 0 @@ -892,21 +891,15 @@ static void __reipl_run(void *unused) { switch (reipl_type) { case IPL_TYPE_CCW: - uv_set_shared(__pa(reipl_block_ccw)); diag308(DIAG308_SET, reipl_block_ccw); - uv_remove_shared(__pa(reipl_block_ccw)); diag308(DIAG308_LOAD_CLEAR, NULL); break; case IPL_TYPE_FCP: - uv_set_shared(__pa(reipl_block_fcp)); diag308(DIAG308_SET, reipl_block_fcp); - uv_remove_shared(__pa(reipl_block_fcp)); diag308(DIAG308_LOAD_CLEAR, NULL); break; case IPL_TYPE_NSS: - uv_set_shared(__pa(reipl_block_nss)); diag308(DIAG308_SET, reipl_block_nss); - uv_remove_shared(__pa(reipl_block_nss)); diag308(DIAG308_LOAD_CLEAR, NULL); break; case IPL_TYPE_UNKNOWN: @@ -1176,9 +1169,7 @@ static struct kset *dump_kset; static void diag308_dump(void *dump_block) { - uv_set_shared(__pa(dump_block)); diag308(DIAG308_SET, dump_block); - uv_remove_shared(__pa(dump_block)); while (1) { if (diag308(DIAG308_LOAD_NORMAL_DUMP, NULL) != 0x302) break; -- cgit From 8024b5a9fc2bed9a00f0bdba60b443fa3cc4bb5d Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Fri, 26 Jul 2019 08:23:20 +0200 Subject: s390/mm: fix dump_pagetables top level page table walking Since commit d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") behaviour of p4d_offset, pud_offset and pmd_offset has been changed so that they cannot be used to iterate through top level page table, because the index for the top level page table is now calculated in pgd_offset. To avoid dumping the very first region/segment top level table entry 2048 times simply iterate entry pointer like it is already done in other page walking cases. Fixes: d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") Reported-by: Ilya Leoshkevich Reviewed-by: Heiko Carstens Signed-off-by: Vasily Gorbik --- arch/s390/mm/dump_pagetables.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/s390/mm/dump_pagetables.c b/arch/s390/mm/dump_pagetables.c index 3b93ba0b5d8d..5d67b81c704a 100644 --- a/arch/s390/mm/dump_pagetables.c +++ b/arch/s390/mm/dump_pagetables.c @@ -161,9 +161,9 @@ static void walk_pmd_level(struct seq_file *m, struct pg_state *st, } #endif - for (i = 0; i < PTRS_PER_PMD && addr < max_addr; i++) { + pmd = pmd_offset(pud, addr); + for (i = 0; i < PTRS_PER_PMD && addr < max_addr; i++, pmd++) { st->current_address = addr; - pmd = pmd_offset(pud, addr); if (!pmd_none(*pmd)) { if (pmd_large(*pmd)) { prot = pmd_val(*pmd) & @@ -192,9 +192,9 @@ static void walk_pud_level(struct seq_file *m, struct pg_state *st, } #endif - for (i = 0; i < PTRS_PER_PUD && addr < max_addr; i++) { + pud = pud_offset(p4d, addr); + for (i = 0; i < PTRS_PER_PUD && addr < max_addr; i++, pud++) { st->current_address = addr; - pud = pud_offset(p4d, addr); if (!pud_none(*pud)) if (pud_large(*pud)) { prot = pud_val(*pud) & @@ -222,9 +222,9 @@ static void walk_p4d_level(struct seq_file *m, struct pg_state *st, } #endif - for (i = 0; i < PTRS_PER_P4D && addr < max_addr; i++) { + p4d = p4d_offset(pgd, addr); + for (i = 0; i < PTRS_PER_P4D && addr < max_addr; i++, p4d++) { st->current_address = addr; - p4d = p4d_offset(pgd, addr); if (!p4d_none(*p4d)) walk_pud_level(m, st, p4d, addr); else -- cgit From 218ddd5acfeae9e19a2fa97c284bf3c2e9de8ebd Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Fri, 2 Aug 2019 17:44:29 +0200 Subject: s390/setup: adjust start_code of init_mm to _text After some investigation it doesn't look like init_mm fields start_code/end_code are used anywhere besides potentially in dump_mm for debugging purposes. Originally the value of 0 for start_code reflected the presence of lowcore and early boot code. But with kaslr in place start_code/end_code range should not span over unoccupied by the code segment memory. So, adjust init_mm start_code to point at the beginning of the code segment like other architectures do it. Acked-by: Heiko Carstens Signed-off-by: Vasily Gorbik --- arch/s390/kernel/setup.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 2b94b0ad3588..253177900950 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -1114,8 +1114,7 @@ void __init setup_arch(char **cmdline_p) ROOT_DEV = Root_RAM0; - /* Is init_mm really needed? */ - init_mm.start_code = PAGE_OFFSET; + init_mm.start_code = (unsigned long) _text; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; init_mm.brk = (unsigned long) _end; -- cgit From fd0c7435d7bfd46161ef43b185f55d759022238c Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Mon, 5 Aug 2019 15:07:19 +0200 Subject: s390/unwind: remove stack recursion warning Remove pointless stack recursion on stack type ... warning, which only confuses people. There is no way to make backchain unwinder 100% reliable. When a task is interrupted in-between stack frame allocation and backchain write instructions new stack frame backchain pointer is left uninitialized (there are also sometimes additional instruction in-between stack frame allocation and backchain write instructions due to gcc shrink-wrapping). In attempt to unwind such stack the unwinder would still try to use that invalid backchain value and perform all kind of sanity checks on it to make sure we are not pointed out of stack. In some cases that invalid backchain value would be 0 and we would falsely treat next stackframe as pt_regs and again gprs[15] in those pt_regs might happen to point at some address within the task's stack. Acked-by: Heiko Carstens Signed-off-by: Vasily Gorbik --- arch/s390/kernel/dumpstack.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/s390/kernel/dumpstack.c b/arch/s390/kernel/dumpstack.c index ac06c3949ab3..34bdc60c0b11 100644 --- a/arch/s390/kernel/dumpstack.c +++ b/arch/s390/kernel/dumpstack.c @@ -114,12 +114,8 @@ recursion_check: * If it comes up a second time then there's something wrong going on: * just break out and report an unknown stack type. */ - if (*visit_mask & (1UL << info->type)) { - printk_deferred_once(KERN_WARNING - "WARNING: stack recursion on stack type %d\n", - info->type); + if (*visit_mask & (1UL << info->type)) goto unknown; - } *visit_mask |= 1UL << info->type; return 0; unknown: -- cgit From b9f23b7376c21f5bf7f5e2b7dfcb82cc9ce92dfc Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Mon, 5 Aug 2019 16:36:56 +0200 Subject: s390/head64: cleanup unused labels Cleanup labels in head64 some of which are not being used since git recorded history. Acked-by: Heiko Carstens Signed-off-by: Vasily Gorbik --- arch/s390/kernel/head64.S | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index 5aea1a527443..f384a18e6c26 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -60,12 +60,5 @@ ENTRY(startup_continue) .align 16 .LPG1: -.Lpcmsk:.quad 0x0000000180000000 -.L4malign:.quad 0xffffffffffc00000 -.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8 -.Lnop: .long 0x07000700 -.Lparmaddr: - .quad PARMAREA - .align 64 .Ldw: .quad 0x0002000180000000,0x0000000000000000 .Laregs:.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 -- cgit From 24350fdadbdec780406a1ef988e6cd3875e374a8 Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Mon, 5 Aug 2019 14:25:16 +0200 Subject: s390: put _stext and _etext into .text section Perf relies on _etext and _stext symbols being one of 't', 'T', 'v' or 'V'. Put them into .text section to guarantee that. Also moves padding to page boundary inside .text which has an effect that .text section is now padded with nops rather than 0's, which apparently has been the initial intention for specifying 0x0700 fill expression. Reported-by: Thomas Richter Tested-by: Thomas Richter Suggested-by: Andreas Krebbel Signed-off-by: Vasily Gorbik --- arch/s390/kernel/vmlinux.lds.S | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 49d55327de0b..7e0eb4020917 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -32,10 +32,9 @@ PHDRS { SECTIONS { . = 0x100000; - _stext = .; /* Start of text section */ .text : { - /* Text and read-only data */ - _text = .; + _stext = .; /* Start of text section */ + _text = .; /* Text and read-only data */ HEAD_TEXT TEXT_TEXT SCHED_TEXT @@ -47,11 +46,10 @@ SECTIONS *(.text.*_indirect_*) *(.fixup) *(.gnu.warning) + . = ALIGN(PAGE_SIZE); + _etext = .; /* End of text section */ } :text = 0x0700 - . = ALIGN(PAGE_SIZE); - _etext = .; /* End of text section */ - NOTES :text :note .dummy : { *(.dummy) } :data -- cgit From c1c6c877b0c79fd7e05c931435aa42211eaeebaf Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 6 Aug 2019 14:03:56 +0200 Subject: ALSA: hda - Don't override global PCM hw info flag The commit bfcba288b97f ("ALSA - hda: Add support for link audio time reporting") introduced the conditional PCM hw info setup, but it overwrites the global azx_pcm_hw object. This will cause a problem if any other HD-audio controller, as it'll inherit the same bit flag although another controller doesn't support that feature. Fix the bug by setting the PCM hw info flag locally. Fixes: bfcba288b97f ("ALSA - hda: Add support for link audio time reporting") Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_controller.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c index c8d1b4316245..2fbdde239936 100644 --- a/sound/pci/hda/hda_controller.c +++ b/sound/pci/hda/hda_controller.c @@ -598,11 +598,9 @@ static int azx_pcm_open(struct snd_pcm_substream *substream) } runtime->private_data = azx_dev; - if (chip->gts_present) - azx_pcm_hw.info = azx_pcm_hw.info | - SNDRV_PCM_INFO_HAS_LINK_SYNCHRONIZED_ATIME; - runtime->hw = azx_pcm_hw; + if (chip->gts_present) + runtime->hw.info |= SNDRV_PCM_INFO_HAS_LINK_SYNCHRONIZED_ATIME; runtime->hw.channels_min = hinfo->channels_min; runtime->hw.channels_max = hinfo->channels_max; runtime->hw.formats = hinfo->formats; -- cgit From db341a049ec7e87053c91008cb452d0bfa6dde72 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 6 Aug 2019 03:08:08 -0500 Subject: ata: rb532_cf: Fix unused variable warning in rb532_pata_driver_probe MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following warning (Building: rb532_defconfig mips): drivers/ata/pata_rb532_cf.c: In function ‘rb532_pata_driver_remove’: drivers/ata/pata_rb532_cf.c:161:24: warning: unused variable ‘info’ [-Wunused-variable] struct rb532_cf_info *info = ah->private_data; ^~~~ Fixes: cd56f35e52d9 ("ata: rb532_cf: Convert to use GPIO descriptors") Signed-off-by: Gustavo A. R. Silva Signed-off-by: Jens Axboe --- drivers/ata/pata_rb532_cf.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index 7c37f2ff09e4..deae466395de 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -158,7 +158,6 @@ static int rb532_pata_driver_probe(struct platform_device *pdev) static int rb532_pata_driver_remove(struct platform_device *pdev) { struct ata_host *ah = platform_get_drvdata(pdev); - struct rb532_cf_info *info = ah->private_data; ata_host_detach(ah); -- cgit From 37ad2e343449ced9e41505eae5494bf40f433181 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 6 Aug 2019 09:03:16 -0700 Subject: Input: applespi - use struct_size() helper One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct touchpad_protocol { ... struct tp_finger fingers[0]; }; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: sizeof(*tp) + tp->number_of_fingers * sizeof(tp->fingers[0]); with: struct_size(tp, fingers, tp->number_of_fingers) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/applespi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/input/keyboard/applespi.c b/drivers/input/keyboard/applespi.c index acf34a5ff571..584289b67fb3 100644 --- a/drivers/input/keyboard/applespi.c +++ b/drivers/input/keyboard/applespi.c @@ -1494,8 +1494,7 @@ static void applespi_got_data(struct applespi_data *applespi) size_t tp_len; tp = &message->touchpad; - tp_len = sizeof(*tp) + - tp->number_of_fingers * sizeof(tp->fingers[0]); + tp_len = struct_size(tp, fingers, tp->number_of_fingers); if (le16_to_cpu(message->length) + 2 != tp_len) { dev_warn_ratelimited(&applespi->spi->dev, -- cgit From 849f5ae3a513c550cad741c68dd3d7eb2bcc2a2c Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 6 Aug 2019 09:05:55 -0700 Subject: Input: iforce - add sanity checks The endpoint type should also be checked before a device is accepted. Reported-by: syzbot+5efc10c005014d061a74@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/iforce/iforce-usb.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c index 29abfeeef9a5..6c554c11a7ac 100644 --- a/drivers/input/joystick/iforce/iforce-usb.c +++ b/drivers/input/joystick/iforce/iforce-usb.c @@ -201,7 +201,12 @@ static int iforce_usb_probe(struct usb_interface *intf, return -ENODEV; epirq = &interface->endpoint[0].desc; + if (!usb_endpoint_is_int_in(epirq)) + return -ENODEV; + epout = &interface->endpoint[1].desc; + if (!usb_endpoint_is_int_out(epout)) + return -ENODEV; iforce_usb = kzalloc(sizeof(*iforce_usb), GFP_KERNEL); if (!iforce_usb) -- cgit From c6303c5d52d5ec3e5bce2e6a5480fa2a1baa45e6 Mon Sep 17 00:00:00 2001 From: Baolin Wang Date: Thu, 25 Jul 2019 11:14:22 +0800 Subject: mmc: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming The SD host controller specification defines 3 types software reset: software reset for data line, software reset for command line and software reset for all. Software reset for all means this reset affects the entire Host controller except for the card detection circuit. In sdhci_runtime_resume_host() we always do a software "reset for all", which causes the Spreadtrum variant controller to work abnormally after resuming. To fix the problem, let's do a software reset for the data and the command part, rather than "for all". However, as sdhci_runtime_resume() is a common sdhci function and we don't want to change the behaviour for other variants, let's introduce a new in-parameter for it. This enables the caller to decide if a "reset for all" shall be done or not. Signed-off-by: Baolin Wang Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-acpi.c | 2 +- drivers/mmc/host/sdhci-esdhc-imx.c | 2 +- drivers/mmc/host/sdhci-of-at91.c | 2 +- drivers/mmc/host/sdhci-pci-core.c | 4 ++-- drivers/mmc/host/sdhci-pxav3.c | 2 +- drivers/mmc/host/sdhci-s3c.c | 2 +- drivers/mmc/host/sdhci-sprd.c | 2 +- drivers/mmc/host/sdhci-xenon.c | 2 +- drivers/mmc/host/sdhci.c | 4 ++-- drivers/mmc/host/sdhci.h | 2 +- 10 files changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index b3a130a9ee23..1604f512c7bd 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -883,7 +883,7 @@ static int sdhci_acpi_runtime_resume(struct device *dev) sdhci_acpi_byt_setting(&c->pdev->dev); - return sdhci_runtime_resume_host(c->host); + return sdhci_runtime_resume_host(c->host, 0); } #endif diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index c391510e9ef4..776a94216248 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -1705,7 +1705,7 @@ static int sdhci_esdhc_runtime_resume(struct device *dev) esdhc_pltfm_set_clock(host, imx_data->actual_clock); } - err = sdhci_runtime_resume_host(host); + err = sdhci_runtime_resume_host(host, 0); if (err) goto disable_ipg_clk; diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index e377b9bc55a4..d4e7e8b7be77 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -289,7 +289,7 @@ static int sdhci_at91_runtime_resume(struct device *dev) } out: - return sdhci_runtime_resume_host(host); + return sdhci_runtime_resume_host(host, 0); } #endif /* CONFIG_PM */ diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 4041878eb0f3..7d06e2860c36 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -167,7 +167,7 @@ static int sdhci_pci_runtime_suspend_host(struct sdhci_pci_chip *chip) err_pci_runtime_suspend: while (--i >= 0) - sdhci_runtime_resume_host(chip->slots[i]->host); + sdhci_runtime_resume_host(chip->slots[i]->host, 0); return ret; } @@ -181,7 +181,7 @@ static int sdhci_pci_runtime_resume_host(struct sdhci_pci_chip *chip) if (!slot) continue; - ret = sdhci_runtime_resume_host(slot->host); + ret = sdhci_runtime_resume_host(slot->host, 0); if (ret) return ret; } diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c index 3ddecf479295..e55037ceda73 100644 --- a/drivers/mmc/host/sdhci-pxav3.c +++ b/drivers/mmc/host/sdhci-pxav3.c @@ -554,7 +554,7 @@ static int sdhci_pxav3_runtime_resume(struct device *dev) if (!IS_ERR(pxa->clk_core)) clk_prepare_enable(pxa->clk_core); - return sdhci_runtime_resume_host(host); + return sdhci_runtime_resume_host(host, 0); } #endif diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 8e4a8ba33f05..f5753aef7151 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -745,7 +745,7 @@ static int sdhci_s3c_runtime_resume(struct device *dev) clk_prepare_enable(busclk); if (ourhost->cur_clk >= 0) clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]); - ret = sdhci_runtime_resume_host(host); + ret = sdhci_runtime_resume_host(host, 0); return ret; } #endif diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c index 603a5d9f045a..83a4767ca680 100644 --- a/drivers/mmc/host/sdhci-sprd.c +++ b/drivers/mmc/host/sdhci-sprd.c @@ -696,7 +696,7 @@ static int sdhci_sprd_runtime_resume(struct device *dev) if (ret) goto clk_disable; - sdhci_runtime_resume_host(host); + sdhci_runtime_resume_host(host, 1); return 0; clk_disable: diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c index 8a18f14cf842..1dea1ba66f7b 100644 --- a/drivers/mmc/host/sdhci-xenon.c +++ b/drivers/mmc/host/sdhci-xenon.c @@ -638,7 +638,7 @@ static int xenon_runtime_resume(struct device *dev) priv->restore_needed = false; } - ret = sdhci_runtime_resume_host(host); + ret = sdhci_runtime_resume_host(host, 0); if (ret) goto out; return 0; diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 59acf8e3331e..a5dc5aae973e 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -3320,7 +3320,7 @@ int sdhci_runtime_suspend_host(struct sdhci_host *host) } EXPORT_SYMBOL_GPL(sdhci_runtime_suspend_host); -int sdhci_runtime_resume_host(struct sdhci_host *host) +int sdhci_runtime_resume_host(struct sdhci_host *host, int soft_reset) { struct mmc_host *mmc = host->mmc; unsigned long flags; @@ -3331,7 +3331,7 @@ int sdhci_runtime_resume_host(struct sdhci_host *host) host->ops->enable_dma(host); } - sdhci_init(host, 0); + sdhci_init(host, soft_reset); if (mmc->ios.power_mode != MMC_POWER_UNDEFINED && mmc->ios.power_mode != MMC_POWER_OFF) { diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 89fd96596a1f..902f855efe8f 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -781,7 +781,7 @@ void sdhci_adma_write_desc(struct sdhci_host *host, void **desc, int sdhci_suspend_host(struct sdhci_host *host); int sdhci_resume_host(struct sdhci_host *host); int sdhci_runtime_suspend_host(struct sdhci_host *host); -int sdhci_runtime_resume_host(struct sdhci_host *host); +int sdhci_runtime_resume_host(struct sdhci_host *host, int soft_reset); #endif void sdhci_cqe_enable(struct mmc_host *mmc); -- cgit From fa25eba6993b3750f417baabba169afaba076178 Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Fri, 26 Jul 2019 10:30:48 +0800 Subject: mmc: cavium: Set the correct dma max segment size for mmc_host We have set the mmc_host.max_seg_size to 8M, but the dma max segment size of PCI device is set to 64K by default in function pci_device_add(). The mmc_host.max_seg_size is used to set the max segment size of the blk queue. Then this mismatch will trigger a calltrace like below when a bigger than 64K segment request arrives at mmc dev. So we should consider the limitation of the cvm_mmc_host when setting the mmc_host.max_seg_size. DMA-API: thunderx_mmc 0000:01:01.4: mapping sg segment longer than device claims to support [len=131072] [max=65536] WARNING: CPU: 6 PID: 238 at kernel/dma/debug.c:1221 debug_dma_map_sg+0x2b8/0x350 Modules linked in: CPU: 6 PID: 238 Comm: kworker/6:1H Not tainted 5.3.0-rc1-next-20190724-yocto-standard+ #62 Hardware name: Marvell OcteonTX CN96XX board (DT) Workqueue: kblockd blk_mq_run_work_fn pstate: 80c00009 (Nzcv daif +PAN +UAO) pc : debug_dma_map_sg+0x2b8/0x350 lr : debug_dma_map_sg+0x2b8/0x350 sp : ffff00001770f9e0 x29: ffff00001770f9e0 x28: ffffffff00000000 x27: 00000000ffffffff x26: ffff800bc2c73180 x25: ffff000010e83700 x24: 0000000000000002 x23: 0000000000000001 x22: 0000000000000001 x21: 0000000000000000 x20: ffff800bc48ba0b0 x19: ffff800bc97e8c00 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff000010e835c8 x14: 6874207265676e6f x13: 6c20746e656d6765 x12: 7320677320676e69 x11: 7070616d203a342e x10: 31303a31303a3030 x9 : 303020636d6d5f78 x8 : 35363d78616d5b20 x7 : 00000000000002fd x6 : ffff000010fd57dc x5 : 0000000000000000 x4 : ffff0000106c61f0 x3 : 00000000ffffffff x2 : 0000800bee060000 x1 : 7010678df3041a00 x0 : 0000000000000000 Call trace: debug_dma_map_sg+0x2b8/0x350 cvm_mmc_request+0x3c4/0x988 __mmc_start_request+0x9c/0x1f8 mmc_start_request+0x7c/0xb0 mmc_blk_mq_issue_rq+0x5c4/0x7b8 mmc_mq_queue_rq+0x11c/0x278 blk_mq_dispatch_rq_list+0xb0/0x568 blk_mq_do_dispatch_sched+0x6c/0x108 blk_mq_sched_dispatch_requests+0x110/0x1b8 __blk_mq_run_hw_queue+0xb0/0x118 blk_mq_run_work_fn+0x28/0x38 process_one_work+0x210/0x490 worker_thread+0x48/0x458 kthread+0x130/0x138 ret_from_fork+0x10/0x1c Signed-off-by: Kevin Hao Fixes: ba3869ff32e4 ("mmc: cavium: Add core MMC driver for Cavium SOCs") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/cavium.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/cavium.c b/drivers/mmc/host/cavium.c index ed5cefb83768..c956813bc6bd 100644 --- a/drivers/mmc/host/cavium.c +++ b/drivers/mmc/host/cavium.c @@ -1046,7 +1046,8 @@ int cvm_mmc_of_slot_probe(struct device *dev, struct cvm_mmc_host *host) mmc->max_segs = 1; /* DMA size field can address up to 8 MB */ - mmc->max_seg_size = 8 * 1024 * 1024; + mmc->max_seg_size = min_t(unsigned int, 8 * 1024 * 1024, + dma_get_max_seg_size(host->dev)); mmc->max_req_size = mmc->max_seg_size; /* External DMA is in 512 byte blocks */ mmc->max_blk_size = 512; -- cgit From b803974a86039913d5280add083d730b2b9ed8ec Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Fri, 26 Jul 2019 10:30:49 +0800 Subject: mmc: cavium: Add the missing dma unmap when the dma has finished. This fixes the below calltrace when the CONFIG_DMA_API_DEBUG is enabled. DMA-API: thunderx_mmc 0000:01:01.4: cpu touching an active dma mapped cacheline [cln=0x000000002fdf9800] WARNING: CPU: 21 PID: 1 at kernel/dma/debug.c:596 debug_dma_assert_idle+0x1f8/0x270 Modules linked in: CPU: 21 PID: 1 Comm: init Not tainted 5.3.0-rc1-next-20190725-yocto-standard+ #64 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 80400009 (Nzcv daif +PAN -UAO) pc : debug_dma_assert_idle+0x1f8/0x270 lr : debug_dma_assert_idle+0x1f8/0x270 sp : ffff0000113cfc10 x29: ffff0000113cfc10 x28: 0000ffff8c880000 x27: ffff800bc72a0000 x26: ffff000010ff8000 x25: ffff000010ff8940 x24: ffff000010ff8968 x23: 0000000000000000 x22: ffff000010e83700 x21: ffff000010ea2000 x20: ffff000010e835c8 x19: ffff800bc2c73300 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff000010e835c8 x14: 6d20616d64206576 x13: 69746361206e6120 x12: 676e696863756f74 x11: 20757063203a342e x10: 31303a31303a3030 x9 : 303020636d6d5f78 x8 : 3230303030303030 x7 : 00000000000002fd x6 : ffff000010fd57d0 x5 : 0000000000000000 x4 : ffff0000106c5210 x3 : 00000000ffffffff x2 : 0000800bee9c0000 x1 : 57d5843f4aa62800 x0 : 0000000000000000 Call trace: debug_dma_assert_idle+0x1f8/0x270 wp_page_copy+0xb0/0x688 do_wp_page+0xa8/0x5b8 __handle_mm_fault+0x600/0xd00 handle_mm_fault+0x118/0x1e8 do_page_fault+0x200/0x500 do_mem_abort+0x50/0xb0 el0_da+0x20/0x24 ---[ end trace a005534bd23e109f ]--- DMA-API: Mapped at: debug_dma_map_sg+0x94/0x350 cvm_mmc_request+0x3c4/0x988 __mmc_start_request+0x9c/0x1f8 mmc_start_request+0x7c/0xb0 mmc_blk_mq_issue_rq+0x5c4/0x7b8 Signed-off-by: Kevin Hao Fixes: ba3869ff32e4 ("mmc: cavium: Add core MMC driver for Cavium SOCs") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/cavium.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/cavium.c b/drivers/mmc/host/cavium.c index c956813bc6bd..89deb451e0ac 100644 --- a/drivers/mmc/host/cavium.c +++ b/drivers/mmc/host/cavium.c @@ -374,6 +374,7 @@ static int finish_dma_single(struct cvm_mmc_host *host, struct mmc_data *data) { data->bytes_xfered = data->blocks * data->blksz; data->error = 0; + dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data)); return 1; } -- cgit From 5c4e2e1af345426f63410a50e2a678673574aa02 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 6 Aug 2019 15:35:39 +0800 Subject: net: ethernet: sun4i-emac: Support phy-handle property for finding PHYs The sun4i-emac uses the "phy" property to find the PHY it's supposed to use. This property was deprecated in favor of "phy-handle" in commit 8c5b09447625 ("dt-bindings: net: sun4i-emac: Convert the binding to a schemas"). Add support for this new property name, and fall back to the old one in case the device tree hasn't been updated. Signed-off-by: Chen-Yu Tsai Signed-off-by: David S. Miller --- drivers/net/ethernet/allwinner/sun4i-emac.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c index 3434730a7699..0537df06a9b5 100644 --- a/drivers/net/ethernet/allwinner/sun4i-emac.c +++ b/drivers/net/ethernet/allwinner/sun4i-emac.c @@ -860,7 +860,9 @@ static int emac_probe(struct platform_device *pdev) goto out_clk_disable_unprepare; } - db->phy_node = of_parse_phandle(np, "phy", 0); + db->phy_node = of_parse_phandle(np, "phy-handle", 0); + if (!db->phy_node) + db->phy_node = of_parse_phandle(np, "phy", 0); if (!db->phy_node) { dev_err(&pdev->dev, "no associated PHY\n"); ret = -ENODEV; -- cgit From debea2cd3193ac868289e8893c3a719c265b0612 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Tue, 6 Aug 2019 10:55:12 +0200 Subject: net: cxgb3_main: Fix a resource leak in a error path in 'init_one()' A call to 'kfree_skb()' is missing in the error handling path of 'init_one()'. This is already present in 'remove_one()' but is missing here. Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c index 1e82b9efe447..58f89f6a040f 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c @@ -3269,7 +3269,7 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!adapter->regs) { dev_err(&pdev->dev, "cannot map device registers\n"); err = -ENOMEM; - goto out_free_adapter; + goto out_free_adapter_nofail; } adapter->pdev = pdev; @@ -3397,6 +3397,9 @@ out_free_dev: if (adapter->port[i]) free_netdev(adapter->port[i]); +out_free_adapter_nofail: + kfree_skb(adapter->nofail_skb); + out_free_adapter: kfree(adapter); -- cgit From d0d006a43e9a7a796f6f178839c92fcc222c564d Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Tue, 6 Aug 2019 12:51:11 +0200 Subject: be2net: disable bh with spin_lock in be_process_mcc be_process_mcc() is invoked in 3 different places and always with BHs disabled except the be_poll function but since it's invoked from softirq with BHs disabled it won't hurt. v1->v2: added explanation to the patch v2->v3: add a missing call from be_cmds.c Signed-off-by: Denis Kirjanov Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 6 ++---- drivers/net/ethernet/emulex/benet/be_main.c | 2 -- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index ef5d61d57597..323976c811e9 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -550,7 +550,7 @@ int be_process_mcc(struct be_adapter *adapter) int num = 0, status = 0; struct be_mcc_obj *mcc_obj = &adapter->mcc_obj; - spin_lock(&adapter->mcc_cq_lock); + spin_lock_bh(&adapter->mcc_cq_lock); while ((compl = be_mcc_compl_get(adapter))) { if (compl->flags & CQE_FLAGS_ASYNC_MASK) { @@ -566,7 +566,7 @@ int be_process_mcc(struct be_adapter *adapter) if (num) be_cq_notify(adapter, mcc_obj->cq.id, mcc_obj->rearm_cq, num); - spin_unlock(&adapter->mcc_cq_lock); + spin_unlock_bh(&adapter->mcc_cq_lock); return status; } @@ -581,9 +581,7 @@ static int be_mcc_wait_compl(struct be_adapter *adapter) if (be_check_error(adapter, BE_ERROR_ANY)) return -EIO; - local_bh_disable(); status = be_process_mcc(adapter); - local_bh_enable(); if (atomic_read(&mcc_obj->q.used) == 0) break; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 2edb86ec9fe9..4d8e40ac66d2 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -5630,9 +5630,7 @@ static void be_worker(struct work_struct *work) * mcc completions */ if (!netif_running(adapter->netdev)) { - local_bh_disable(); be_process_mcc(adapter); - local_bh_enable(); goto reschedule; } -- cgit From 0efedbf11f07adee555e0c4ba9c6eb58760aa94f Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Tue, 6 Aug 2019 15:16:16 +0200 Subject: net: stmmac: xgmac: Fix XGMAC selftests Fixup the XGMAC selftests by correctly finishing the implementation of set_filter callback. Result: $ ethtool -t enp4s0 The test result is PASS The test extra info: 1. MAC Loopback 0 2. PHY Loopback -95 3. MMC Counters -95 4. EEE -95 5. Hash Filter MC 0 6. Perfect Filter UC 0 7. MC Filter 0 8. UC Filter 0 9. Flow Control 0 Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h | 7 +- .../net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 83 +++++++++++++++++++--- 2 files changed, 79 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h index 7f86dffb264d..3174b701aa90 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h @@ -44,11 +44,13 @@ #define XGMAC_CORE_INIT_RX 0 #define XGMAC_PACKET_FILTER 0x00000008 #define XGMAC_FILTER_RA BIT(31) +#define XGMAC_FILTER_HPF BIT(10) #define XGMAC_FILTER_PCF BIT(7) #define XGMAC_FILTER_PM BIT(4) #define XGMAC_FILTER_HMC BIT(2) #define XGMAC_FILTER_PR BIT(0) #define XGMAC_HASH_TABLE(x) (0x00000010 + (x) * 4) +#define XGMAC_MAX_HASH_TABLE 8 #define XGMAC_RXQ_CTRL0 0x000000a0 #define XGMAC_RXQEN(x) GENMASK((x) * 2 + 1, (x) * 2) #define XGMAC_RXQEN_SHIFT(x) ((x) * 2) @@ -99,11 +101,12 @@ #define XGMAC_MDIO_ADDR 0x00000200 #define XGMAC_MDIO_DATA 0x00000204 #define XGMAC_MDIO_C22P 0x00000220 -#define XGMAC_ADDR0_HIGH 0x00000300 +#define XGMAC_ADDRx_HIGH(x) (0x00000300 + (x) * 0x8) +#define XGMAC_ADDR_MAX 32 #define XGMAC_AE BIT(31) #define XGMAC_DCS GENMASK(19, 16) #define XGMAC_DCS_SHIFT 16 -#define XGMAC_ADDR0_LOW 0x00000304 +#define XGMAC_ADDRx_LOW(x) (0x00000304 + (x) * 0x8) #define XGMAC_ARP_ADDR 0x00000c10 #define XGMAC_TIMESTAMP_STATUS 0x00000d20 #define XGMAC_TXTSC BIT(15) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c index 0a32c96a7854..03a6a59650ca 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c @@ -4,6 +4,8 @@ * stmmac XGMAC support. */ +#include +#include #include "stmmac.h" #include "dwxgmac2.h" @@ -278,10 +280,10 @@ static void dwxgmac2_set_umac_addr(struct mac_device_info *hw, u32 value; value = (addr[5] << 8) | addr[4]; - writel(value | XGMAC_AE, ioaddr + XGMAC_ADDR0_HIGH); + writel(value | XGMAC_AE, ioaddr + XGMAC_ADDRx_HIGH(reg_n)); value = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0]; - writel(value, ioaddr + XGMAC_ADDR0_LOW); + writel(value, ioaddr + XGMAC_ADDRx_LOW(reg_n)); } static void dwxgmac2_get_umac_addr(struct mac_device_info *hw, @@ -291,8 +293,8 @@ static void dwxgmac2_get_umac_addr(struct mac_device_info *hw, u32 hi_addr, lo_addr; /* Read the MAC address from the hardware */ - hi_addr = readl(ioaddr + XGMAC_ADDR0_HIGH); - lo_addr = readl(ioaddr + XGMAC_ADDR0_LOW); + hi_addr = readl(ioaddr + XGMAC_ADDRx_HIGH(reg_n)); + lo_addr = readl(ioaddr + XGMAC_ADDRx_LOW(reg_n)); /* Extract the MAC address from the high and low words */ addr[0] = lo_addr & 0xff; @@ -303,19 +305,82 @@ static void dwxgmac2_get_umac_addr(struct mac_device_info *hw, addr[5] = (hi_addr >> 8) & 0xff; } +static void dwxgmac2_set_mchash(void __iomem *ioaddr, u32 *mcfilterbits, + int mcbitslog2) +{ + int numhashregs, regs; + + switch (mcbitslog2) { + case 6: + numhashregs = 2; + break; + case 7: + numhashregs = 4; + break; + case 8: + numhashregs = 8; + break; + default: + return; + } + + for (regs = 0; regs < numhashregs; regs++) + writel(mcfilterbits[regs], ioaddr + XGMAC_HASH_TABLE(regs)); +} + static void dwxgmac2_set_filter(struct mac_device_info *hw, struct net_device *dev) { void __iomem *ioaddr = (void __iomem *)dev->base_addr; - u32 value = XGMAC_FILTER_RA; + u32 value = readl(ioaddr + XGMAC_PACKET_FILTER); + int mcbitslog2 = hw->mcast_bits_log2; + u32 mc_filter[8]; + int i; + + value &= ~(XGMAC_FILTER_PR | XGMAC_FILTER_HMC | XGMAC_FILTER_PM); + value |= XGMAC_FILTER_HPF; + + memset(mc_filter, 0, sizeof(mc_filter)); if (dev->flags & IFF_PROMISC) { - value |= XGMAC_FILTER_PR | XGMAC_FILTER_PCF; + value |= XGMAC_FILTER_PR; + value |= XGMAC_FILTER_PCF; } else if ((dev->flags & IFF_ALLMULTI) || - (netdev_mc_count(dev) > HASH_TABLE_SIZE)) { + (netdev_mc_count(dev) > hw->multicast_filter_bins)) { value |= XGMAC_FILTER_PM; - writel(~0x0, ioaddr + XGMAC_HASH_TABLE(0)); - writel(~0x0, ioaddr + XGMAC_HASH_TABLE(1)); + + for (i = 0; i < XGMAC_MAX_HASH_TABLE; i++) + writel(~0x0, ioaddr + XGMAC_HASH_TABLE(i)); + } else if (!netdev_mc_empty(dev)) { + struct netdev_hw_addr *ha; + + value |= XGMAC_FILTER_HMC; + + netdev_for_each_mc_addr(ha, dev) { + int nr = (bitrev32(~crc32_le(~0, ha->addr, 6)) >> + (32 - mcbitslog2)); + mc_filter[nr >> 5] |= (1 << (nr & 0x1F)); + } + } + + dwxgmac2_set_mchash(ioaddr, mc_filter, mcbitslog2); + + /* Handle multiple unicast addresses */ + if (netdev_uc_count(dev) > XGMAC_ADDR_MAX) { + value |= XGMAC_FILTER_PR; + } else { + struct netdev_hw_addr *ha; + int reg = 1; + + netdev_for_each_uc_addr(ha, dev) { + dwxgmac2_set_umac_addr(hw, ha->addr, reg); + reg++; + } + + for ( ; reg < XGMAC_ADDR_MAX; reg++) { + writel(0, ioaddr + XGMAC_ADDRx_HIGH(reg)); + writel(0, ioaddr + XGMAC_ADDRx_LOW(reg)); + } } writel(value, ioaddr + XGMAC_PACKET_FILTER); -- cgit From e8df7e8c233a18d2704e37ecff47583b494789d3 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Tue, 6 Aug 2019 15:16:17 +0200 Subject: net: stmmac: Fix issues when number of Queues >= 4 When queues >= 4 we use different registers but we were not subtracting the offset of 4. Fix this. Found out by Coverity. Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 4 ++++ drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index 01c2e2d83e76..fc9954e4a772 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -85,6 +85,8 @@ static void dwmac4_rx_queue_priority(struct mac_device_info *hw, u32 value; base_register = (queue < 4) ? GMAC_RXQ_CTRL2 : GMAC_RXQ_CTRL3; + if (queue >= 4) + queue -= 4; value = readl(ioaddr + base_register); @@ -102,6 +104,8 @@ static void dwmac4_tx_queue_priority(struct mac_device_info *hw, u32 value; base_register = (queue < 4) ? GMAC_TXQ_PRTY_MAP0 : GMAC_TXQ_PRTY_MAP1; + if (queue >= 4) + queue -= 4; value = readl(ioaddr + base_register); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c index 03a6a59650ca..85c68b7ee8c6 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c @@ -108,6 +108,8 @@ static void dwxgmac2_rx_queue_prio(struct mac_device_info *hw, u32 prio, u32 value, reg; reg = (queue < 4) ? XGMAC_RXQ_CTRL2 : XGMAC_RXQ_CTRL3; + if (queue >= 4) + queue -= 4; value = readl(ioaddr + reg); value &= ~XGMAC_PSRQ(queue); @@ -171,6 +173,8 @@ static void dwxgmac2_map_mtl_to_dma(struct mac_device_info *hw, u32 queue, u32 value, reg; reg = (queue < 4) ? XGMAC_MTL_RXQ_DMA_MAP0 : XGMAC_MTL_RXQ_DMA_MAP1; + if (queue >= 4) + queue -= 4; value = readl(ioaddr + reg); value &= ~XGMAC_QxMDMACH(queue); -- cgit From 4a6a1385a4db5f42258a40fcd497cbfd22075968 Mon Sep 17 00:00:00 2001 From: Jose Abreu Date: Tue, 6 Aug 2019 15:16:18 +0200 Subject: net: stmmac: tc: Do not return a fragment entry Do not try to return a fragment entry from TC list. Otherwise we may not clean properly allocated entries. Signed-off-by: Jose Abreu Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c index 58ea18af9813..37c0bc699cd9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c @@ -37,7 +37,7 @@ static struct stmmac_tc_entry *tc_find_entry(struct stmmac_priv *priv, entry = &priv->tc_entries[i]; if (!entry->in_use && !first && free) first = entry; - if (entry->handle == loc && !free) + if ((entry->handle == loc) && !free && !entry->is_frag) dup = entry; } -- cgit From 72cda9bb5e219aea0f2f62f56ae05198c59022a7 Mon Sep 17 00:00:00 2001 From: Likun Gao Date: Fri, 2 Aug 2019 15:18:57 +0800 Subject: drm/amdgpu: pin the csb buffer on hw init for gfx v8 Without this pin, the csb buffer will be filled with inconsistent data after S3 resume. And that will causes gfx hang on gfxoff exit since this csb will be executed then. Signed-off-by: Likun Gao Tested-by: Paul Gover Reviewed-by: Feifei Xu Reviewed-by: Xiaojie Yuan Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 40 +++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index 751567f78567..ee1ccdcf2d30 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -1321,6 +1321,39 @@ static int gfx_v8_0_rlc_init(struct amdgpu_device *adev) return 0; } +static int gfx_v8_0_csb_vram_pin(struct amdgpu_device *adev) +{ + int r; + + r = amdgpu_bo_reserve(adev->gfx.rlc.clear_state_obj, false); + if (unlikely(r != 0)) + return r; + + r = amdgpu_bo_pin(adev->gfx.rlc.clear_state_obj, + AMDGPU_GEM_DOMAIN_VRAM); + if (!r) + adev->gfx.rlc.clear_state_gpu_addr = + amdgpu_bo_gpu_offset(adev->gfx.rlc.clear_state_obj); + + amdgpu_bo_unreserve(adev->gfx.rlc.clear_state_obj); + + return r; +} + +static void gfx_v8_0_csb_vram_unpin(struct amdgpu_device *adev) +{ + int r; + + if (!adev->gfx.rlc.clear_state_obj) + return; + + r = amdgpu_bo_reserve(adev->gfx.rlc.clear_state_obj, true); + if (likely(r == 0)) { + amdgpu_bo_unpin(adev->gfx.rlc.clear_state_obj); + amdgpu_bo_unreserve(adev->gfx.rlc.clear_state_obj); + } +} + static void gfx_v8_0_mec_fini(struct amdgpu_device *adev) { amdgpu_bo_free_kernel(&adev->gfx.mec.hpd_eop_obj, NULL, NULL); @@ -4785,6 +4818,10 @@ static int gfx_v8_0_hw_init(void *handle) gfx_v8_0_init_golden_registers(adev); gfx_v8_0_constants_init(adev); + r = gfx_v8_0_csb_vram_pin(adev); + if (r) + return r; + r = adev->gfx.rlc.funcs->resume(adev); if (r) return r; @@ -4901,6 +4938,9 @@ static int gfx_v8_0_hw_fini(void *handle) else pr_err("rlc is busy, skip halt rlc\n"); amdgpu_gfx_rlc_exit_safe_mode(adev); + + gfx_v8_0_csb_vram_unpin(adev); + return 0; } -- cgit From b35475c5491a14c8ce7a5046ef7bcda8a860581a Mon Sep 17 00:00:00 2001 From: Roman Mashak Date: Fri, 2 Aug 2019 15:16:46 -0400 Subject: net sched: update vlan action for batched events operations Add get_fill_size() routine used to calculate the action size when building a batch of events. Fixes: c7e2b9689 ("sched: introduce vlan action") Signed-off-by: Roman Mashak Signed-off-by: David S. Miller --- net/sched/act_vlan.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/net/sched/act_vlan.c b/net/sched/act_vlan.c index 984b05ab0c87..a3c9eea1ee8a 100644 --- a/net/sched/act_vlan.c +++ b/net/sched/act_vlan.c @@ -308,6 +308,14 @@ static int tcf_vlan_search(struct net *net, struct tc_action **a, u32 index) return tcf_idr_search(tn, a, index); } +static size_t tcf_vlan_get_fill_size(const struct tc_action *act) +{ + return nla_total_size(sizeof(struct tc_vlan)) + + nla_total_size(sizeof(u16)) /* TCA_VLAN_PUSH_VLAN_ID */ + + nla_total_size(sizeof(u16)) /* TCA_VLAN_PUSH_VLAN_PROTOCOL */ + + nla_total_size(sizeof(u8)); /* TCA_VLAN_PUSH_VLAN_PRIORITY */ +} + static struct tc_action_ops act_vlan_ops = { .kind = "vlan", .id = TCA_ID_VLAN, @@ -317,6 +325,7 @@ static struct tc_action_ops act_vlan_ops = { .init = tcf_vlan_init, .cleanup = tcf_vlan_cleanup, .walk = tcf_vlan_walker, + .get_fill_size = tcf_vlan_get_fill_size, .lookup = tcf_vlan_search, .size = sizeof(struct tcf_vlan), }; -- cgit From 8571deb013812f35260b2b7152a522eacfa9ccf9 Mon Sep 17 00:00:00 2001 From: Roman Mashak Date: Fri, 2 Aug 2019 15:16:47 -0400 Subject: tc-testing: updated vlan action tests with batch create/delete Update TDC tests with cases varifying ability of TC to install or delete batches of vlan actions. Signed-off-by: Roman Mashak Signed-off-by: David S. Miller --- .../tc-testing/tc-tests/actions/vlan.json | 94 ++++++++++++++++++++++ 1 file changed, 94 insertions(+) diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json b/tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json index cc7c7d758008..6503b1ce091f 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json @@ -713,5 +713,99 @@ "teardown": [ "$TC actions flush action vlan" ] + }, + { + "id": "294e", + "name": "Add batch of 32 vlan push actions with cookie", + "category": [ + "actions", + "vlan" + ], + "setup": [ + [ + "$TC actions flush action vlan", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action vlan push protocol 802.1q id 4094 priority 7 pipe index \\$i cookie aabbccddeeff112233445566778800a1 \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action vlan", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "32", + "teardown": [ + "$TC actions flush action vlan" + ] + }, + { + "id": "56f7", + "name": "Delete batch of 32 vlan push actions", + "category": [ + "actions", + "vlan" + ], + "setup": [ + [ + "$TC actions flush action vlan", + 0, + 1, + 255 + ], + "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action vlan push protocol 802.1q id 4094 priority 7 pipe index \\$i \\\"; args=\\\"\\$args\\$cmd\\\"; done && $TC actions add \\$args\"" + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action vlan index \\$i \\\"; args=\"\\$args\\$cmd\"; done && $TC actions del \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action vlan", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "0", + "teardown": [] + }, + { + "id": "759f", + "name": "Add batch of 32 vlan pop actions with cookie", + "category": [ + "actions", + "vlan" + ], + "setup": [ + [ + "$TC actions flush action vlan", + 0, + 1, + 255 + ] + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action vlan pop continue index \\$i cookie aabbccddeeff112233445566778800a1 \\\"; args=\"\\$args\\$cmd\"; done && $TC actions add \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action vlan", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "32", + "teardown": [ + "$TC actions flush action vlan" + ] + }, + { + "id": "c84a", + "name": "Delete batch of 32 vlan pop actions", + "category": [ + "actions", + "vlan" + ], + "setup": [ + [ + "$TC actions flush action vlan", + 0, + 1, + 255 + ], + "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action vlan pop index \\$i \\\"; args=\\\"\\$args\\$cmd\\\"; done && $TC actions add \\$args\"" + ], + "cmdUnderTest": "bash -c \"for i in \\`seq 1 32\\`; do cmd=\\\"action vlan index \\$i \\\"; args=\"\\$args\\$cmd\"; done && $TC actions del \\$args\"", + "expExitCode": "0", + "verifyCmd": "$TC actions list action vlan", + "matchPattern": "^[ \t]+index [0-9]+ ref", + "matchCount": "0", + "teardown": [] } ] -- cgit From 1a2c070ae805910a853b4a14818481ed2e17c727 Mon Sep 17 00:00:00 2001 From: Jiangfeng Xiao Date: Sat, 3 Aug 2019 20:31:39 +0800 Subject: net: hisilicon: make hip04_tx_reclaim non-reentrant If hip04_tx_reclaim is interrupted while it is running and then __napi_schedule continues to execute hip04_rx_poll->hip04_tx_reclaim, reentrancy occurs and oops is generated. So you need to mask the interrupt during the hip04_tx_reclaim run. The kernel oops exception stack is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = c0003000 [00000050] *pgd=80000000a04003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM Modules linked in: hip04_eth mtdblock mtd_blkdevs mtd ohci_platform ehci_platform ohci_hcd ehci_hcd vfat fat sd_mod usb_storage scsi_mod usbcore usb_common CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.4.185 #1 Hardware name: Hisilicon A15 task: c0a250e0 task.stack: c0a00000 PC is at hip04_tx_reclaim+0xe0/0x17c [hip04_eth] LR is at hip04_tx_reclaim+0x30/0x17c [hip04_eth] pc : [] lr : [] psr: 600e0313 sp : c0a01d88 ip : 00000000 fp : c0601f9c r10: 00000000 r9 : c3482380 r8 : 00000001 r7 : 00000000 r6 : 000000e1 r5 : c3482000 r4 : 0000000c r3 : f2209800 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 32c5387d Table: 03d28c80 DAC: 55555555 Process swapper/0 (pid: 0, stack limit = 0xc0a00190) Stack: (0xc0a01d88 to 0xc0a02000) [] (hip04_tx_reclaim [hip04_eth]) from [] (hip04_rx_poll+0x88/0x368 [hip04_eth]) [] (hip04_rx_poll [hip04_eth]) from [] (net_rx_action+0x114/0x34c) [] (net_rx_action) from [] (__do_softirq+0x218/0x318) [] (__do_softirq) from [] (irq_exit+0x88/0xac) [] (irq_exit) from [] (msa_irq_exit+0x11c/0x1d4) [] (msa_irq_exit) from [] (__handle_domain_irq+0x110/0x148) [] (__handle_domain_irq) from [] (gic_handle_irq+0xd4/0x118) [] (gic_handle_irq) from [] (__irq_svc+0x40/0x58) Exception stack(0xc0a01f30 to 0xc0a01f78) 1f20: c0ae8b40 00000000 00000000 00000000 1f40: 00000002 ffffe000 c0601f9c 00000000 ffffffff c0a2257c c0a22440 c0831a38 1f60: c0a01ec4 c0a01f80 c0203714 c0203718 600e0213 ffffffff [] (__irq_svc) from [] (arch_cpu_idle+0x20/0x3c) [] (arch_cpu_idle) from [] (cpu_startup_entry+0x244/0x29c) [] (cpu_startup_entry) from [] (rest_init+0xc8/0x10c) [] (rest_init) from [] (start_kernel+0x468/0x514) Code: a40599e5 016086e2 018088e2 7660efe6 (503090e5) ---[ end trace 1db21d6d09c49d74 ]--- Kernel panic - not syncing: Fatal exception in interrupt CPU3: stopping CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D O 4.4.185 #1 Signed-off-by: Jiangfeng Xiao Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hip04_eth.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c index d60452845539..1e1b154ed2ec 100644 --- a/drivers/net/ethernet/hisilicon/hip04_eth.c +++ b/drivers/net/ethernet/hisilicon/hip04_eth.c @@ -585,6 +585,9 @@ static int hip04_rx_poll(struct napi_struct *napi, int budget) u16 len; u32 err; + /* clean up tx descriptors */ + tx_remaining = hip04_tx_reclaim(ndev, false); + while (cnt && !last) { buf = priv->rx_buf[priv->rx_head]; skb = build_skb(buf, priv->rx_buf_size); @@ -645,8 +648,7 @@ refill: } napi_complete_done(napi, rx); done: - /* clean up tx descriptors and start a new timer if necessary */ - tx_remaining = hip04_tx_reclaim(ndev, false); + /* start a new timer if necessary */ if (rx < budget && tx_remaining) hip04_start_tx_timer(priv); -- cgit From f2243b82785942be519016067ee6c55a063bbfe2 Mon Sep 17 00:00:00 2001 From: Jiangfeng Xiao Date: Sat, 3 Aug 2019 20:31:40 +0800 Subject: net: hisilicon: fix hip04-xmit never return TX_BUSY TX_DESC_NUM is 256, in tx_count, the maximum value of mod(TX_DESC_NUM - 1) is 254, the variable "count" in the hip04_mac_start_xmit function is never equal to (TX_DESC_NUM - 1), so hip04_mac_start_xmit never return NETDEV_TX_BUSY. tx_count is modified to mod(TX_DESC_NUM) so that the maximum value of tx_count can reach (TX_DESC_NUM - 1), then hip04_mac_start_xmit can reurn NETDEV_TX_BUSY. Signed-off-by: Jiangfeng Xiao Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hip04_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c index 1e1b154ed2ec..d775b980f1bb 100644 --- a/drivers/net/ethernet/hisilicon/hip04_eth.c +++ b/drivers/net/ethernet/hisilicon/hip04_eth.c @@ -248,7 +248,7 @@ struct hip04_priv { static inline unsigned int tx_count(unsigned int head, unsigned int tail) { - return (head - tail) % (TX_DESC_NUM - 1); + return (head - tail) % TX_DESC_NUM; } static void hip04_config_port(struct net_device *ndev, u32 speed, u32 duplex) -- cgit From 96a50c0d907ac8f5c3d6b051031a19eb8a2b53e3 Mon Sep 17 00:00:00 2001 From: Jiangfeng Xiao Date: Sat, 3 Aug 2019 20:31:41 +0800 Subject: net: hisilicon: Fix dma_map_single failed on arm64 On the arm64 platform, executing "ifconfig eth0 up" will fail, returning "ifconfig: SIOCSIFFLAGS: Input/output error." ndev->dev is not initialized, dma_map_single->get_dma_ops-> dummy_dma_ops->__dummy_map_page will return DMA_ERROR_CODE directly, so when we use dma_map_single, the first parameter is to use the device of platform_device. Signed-off-by: Jiangfeng Xiao Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hip04_eth.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c index d775b980f1bb..c84167447abe 100644 --- a/drivers/net/ethernet/hisilicon/hip04_eth.c +++ b/drivers/net/ethernet/hisilicon/hip04_eth.c @@ -220,6 +220,7 @@ struct hip04_priv { unsigned int reg_inten; struct napi_struct napi; + struct device *dev; struct net_device *ndev; struct tx_desc *tx_desc; @@ -465,7 +466,7 @@ static int hip04_tx_reclaim(struct net_device *ndev, bool force) } if (priv->tx_phys[tx_tail]) { - dma_unmap_single(&ndev->dev, priv->tx_phys[tx_tail], + dma_unmap_single(priv->dev, priv->tx_phys[tx_tail], priv->tx_skb[tx_tail]->len, DMA_TO_DEVICE); priv->tx_phys[tx_tail] = 0; @@ -516,8 +517,8 @@ hip04_mac_start_xmit(struct sk_buff *skb, struct net_device *ndev) return NETDEV_TX_BUSY; } - phys = dma_map_single(&ndev->dev, skb->data, skb->len, DMA_TO_DEVICE); - if (dma_mapping_error(&ndev->dev, phys)) { + phys = dma_map_single(priv->dev, skb->data, skb->len, DMA_TO_DEVICE); + if (dma_mapping_error(priv->dev, phys)) { dev_kfree_skb(skb); return NETDEV_TX_OK; } @@ -596,7 +597,7 @@ static int hip04_rx_poll(struct napi_struct *napi, int budget) goto refill; } - dma_unmap_single(&ndev->dev, priv->rx_phys[priv->rx_head], + dma_unmap_single(priv->dev, priv->rx_phys[priv->rx_head], RX_BUF_SIZE, DMA_FROM_DEVICE); priv->rx_phys[priv->rx_head] = 0; @@ -625,9 +626,9 @@ refill: buf = netdev_alloc_frag(priv->rx_buf_size); if (!buf) goto done; - phys = dma_map_single(&ndev->dev, buf, + phys = dma_map_single(priv->dev, buf, RX_BUF_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(&ndev->dev, phys)) + if (dma_mapping_error(priv->dev, phys)) goto done; priv->rx_buf[priv->rx_head] = buf; priv->rx_phys[priv->rx_head] = phys; @@ -730,9 +731,9 @@ static int hip04_mac_open(struct net_device *ndev) for (i = 0; i < RX_DESC_NUM; i++) { dma_addr_t phys; - phys = dma_map_single(&ndev->dev, priv->rx_buf[i], + phys = dma_map_single(priv->dev, priv->rx_buf[i], RX_BUF_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(&ndev->dev, phys)) + if (dma_mapping_error(priv->dev, phys)) return -EIO; priv->rx_phys[i] = phys; @@ -766,7 +767,7 @@ static int hip04_mac_stop(struct net_device *ndev) for (i = 0; i < RX_DESC_NUM; i++) { if (priv->rx_phys[i]) { - dma_unmap_single(&ndev->dev, priv->rx_phys[i], + dma_unmap_single(priv->dev, priv->rx_phys[i], RX_BUF_SIZE, DMA_FROM_DEVICE); priv->rx_phys[i] = 0; } @@ -909,6 +910,7 @@ static int hip04_mac_probe(struct platform_device *pdev) return -ENOMEM; priv = netdev_priv(ndev); + priv->dev = d; priv->ndev = ndev; platform_set_drvdata(pdev, ndev); SET_NETDEV_DEV(ndev, &pdev->dev); -- cgit From c4bd48699beb92d6bb99d6139d1e9737cca73480 Mon Sep 17 00:00:00 2001 From: Vlad Buslov Date: Sat, 3 Aug 2019 16:36:18 +0300 Subject: net: sched: police: allow accessing police->params with rtnl Recently implemented support for police action in flow_offload infra leads to following rcu usage warning: [ 1925.881092] ============================= [ 1925.881094] WARNING: suspicious RCU usage [ 1925.881098] 5.3.0-rc1+ #574 Not tainted [ 1925.881100] ----------------------------- [ 1925.881104] include/net/tc_act/tc_police.h:57 suspicious rcu_dereference_check() usage! [ 1925.881106] other info that might help us debug this: [ 1925.881109] rcu_scheduler_active = 2, debug_locks = 1 [ 1925.881112] 1 lock held by tc/18591: [ 1925.881115] #0: 00000000b03cb918 (rtnl_mutex){+.+.}, at: tc_new_tfilter+0x47c/0x970 [ 1925.881124] stack backtrace: [ 1925.881127] CPU: 2 PID: 18591 Comm: tc Not tainted 5.3.0-rc1+ #574 [ 1925.881130] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 1925.881132] Call Trace: [ 1925.881138] dump_stack+0x85/0xc0 [ 1925.881145] tc_setup_flow_action+0x1771/0x2040 [ 1925.881155] fl_hw_replace_filter+0x11f/0x2e0 [cls_flower] [ 1925.881175] fl_change+0xd24/0x1b30 [cls_flower] [ 1925.881200] tc_new_tfilter+0x3e0/0x970 [ 1925.881231] ? tc_del_tfilter+0x720/0x720 [ 1925.881243] rtnetlink_rcv_msg+0x389/0x4b0 [ 1925.881250] ? netlink_deliver_tap+0x95/0x400 [ 1925.881257] ? rtnl_dellink+0x2d0/0x2d0 [ 1925.881264] netlink_rcv_skb+0x49/0x110 [ 1925.881275] netlink_unicast+0x171/0x200 [ 1925.881284] netlink_sendmsg+0x224/0x3f0 [ 1925.881299] sock_sendmsg+0x5e/0x60 [ 1925.881305] ___sys_sendmsg+0x2ae/0x330 [ 1925.881309] ? task_work_add+0x43/0x50 [ 1925.881314] ? fput_many+0x45/0x80 [ 1925.881329] ? __lock_acquire+0x248/0x1930 [ 1925.881342] ? find_held_lock+0x2b/0x80 [ 1925.881347] ? task_work_run+0x7b/0xd0 [ 1925.881359] __sys_sendmsg+0x59/0xa0 [ 1925.881375] do_syscall_64+0x5c/0xb0 [ 1925.881381] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1925.881384] RIP: 0033:0x7feb245047b8 [ 1925.881388] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 54 [ 1925.881391] RSP: 002b:00007ffc2d2a5788 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1925.881395] RAX: ffffffffffffffda RBX: 000000005d4497ed RCX: 00007feb245047b8 [ 1925.881398] RDX: 0000000000000000 RSI: 00007ffc2d2a57f0 RDI: 0000000000000003 [ 1925.881400] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006 [ 1925.881403] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000001 [ 1925.881406] R13: 0000000000480640 R14: 0000000000000012 R15: 0000000000000001 Change tcf_police_rate_bytes_ps() and tcf_police_tcfp_burst() helpers to allow using them from both rtnl and rcu protected contexts. Fixes: 8c8cfc6ed274 ("net/sched: add police action to the hardware intermediate representation") Signed-off-by: Vlad Buslov Reviewed-by: Pieter Jansen van Vuuren Signed-off-by: David S. Miller --- include/net/tc_act/tc_police.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/net/tc_act/tc_police.h b/include/net/tc_act/tc_police.h index 8b9ef3664262..cfdc7cb82cad 100644 --- a/include/net/tc_act/tc_police.h +++ b/include/net/tc_act/tc_police.h @@ -54,7 +54,7 @@ static inline u64 tcf_police_rate_bytes_ps(const struct tc_action *act) struct tcf_police *police = to_police(act); struct tcf_police_params *params; - params = rcu_dereference_bh(police->params); + params = rcu_dereference_bh_rtnl(police->params); return params->rate.rate_bytes_ps; } @@ -63,7 +63,7 @@ static inline s64 tcf_police_tcfp_burst(const struct tc_action *act) struct tcf_police *police = to_police(act); struct tcf_police_params *params; - params = rcu_dereference_bh(police->params); + params = rcu_dereference_bh_rtnl(police->params); return params->tcfp_burst; } -- cgit From 67cbf7dedd03a63ca2fbd9df2049eabba7a37edf Mon Sep 17 00:00:00 2001 From: Vlad Buslov Date: Sat, 3 Aug 2019 16:36:19 +0300 Subject: net: sched: sample: allow accessing psample_group with rtnl Recently implemented support for sample action in flow_offload infra leads to following rcu usage warning: [ 1938.234856] ============================= [ 1938.234858] WARNING: suspicious RCU usage [ 1938.234863] 5.3.0-rc1+ #574 Not tainted [ 1938.234866] ----------------------------- [ 1938.234869] include/net/tc_act/tc_sample.h:47 suspicious rcu_dereference_check() usage! [ 1938.234872] other info that might help us debug this: [ 1938.234875] rcu_scheduler_active = 2, debug_locks = 1 [ 1938.234879] 1 lock held by tc/19540: [ 1938.234881] #0: 00000000b03cb918 (rtnl_mutex){+.+.}, at: tc_new_tfilter+0x47c/0x970 [ 1938.234900] stack backtrace: [ 1938.234905] CPU: 2 PID: 19540 Comm: tc Not tainted 5.3.0-rc1+ #574 [ 1938.234908] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 1938.234911] Call Trace: [ 1938.234922] dump_stack+0x85/0xc0 [ 1938.234930] tc_setup_flow_action+0xed5/0x2040 [ 1938.234944] fl_hw_replace_filter+0x11f/0x2e0 [cls_flower] [ 1938.234965] fl_change+0xd24/0x1b30 [cls_flower] [ 1938.234990] tc_new_tfilter+0x3e0/0x970 [ 1938.235021] ? tc_del_tfilter+0x720/0x720 [ 1938.235028] rtnetlink_rcv_msg+0x389/0x4b0 [ 1938.235038] ? netlink_deliver_tap+0x95/0x400 [ 1938.235044] ? rtnl_dellink+0x2d0/0x2d0 [ 1938.235053] netlink_rcv_skb+0x49/0x110 [ 1938.235063] netlink_unicast+0x171/0x200 [ 1938.235073] netlink_sendmsg+0x224/0x3f0 [ 1938.235091] sock_sendmsg+0x5e/0x60 [ 1938.235097] ___sys_sendmsg+0x2ae/0x330 [ 1938.235111] ? __handle_mm_fault+0x12cd/0x19e0 [ 1938.235125] ? __handle_mm_fault+0x12cd/0x19e0 [ 1938.235138] ? find_held_lock+0x2b/0x80 [ 1938.235147] ? do_user_addr_fault+0x22d/0x490 [ 1938.235160] __sys_sendmsg+0x59/0xa0 [ 1938.235178] do_syscall_64+0x5c/0xb0 [ 1938.235187] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1938.235192] RIP: 0033:0x7ff9a4d597b8 [ 1938.235197] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 54 [ 1938.235200] RSP: 002b:00007ffcfe381c48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1938.235205] RAX: ffffffffffffffda RBX: 000000005d4497f9 RCX: 00007ff9a4d597b8 [ 1938.235208] RDX: 0000000000000000 RSI: 00007ffcfe381cb0 RDI: 0000000000000003 [ 1938.235211] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006 [ 1938.235214] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000001 [ 1938.235217] R13: 0000000000480640 R14: 0000000000000012 R15: 0000000000000001 Change tcf_sample_psample_group() helper to allow using it from both rtnl and rcu protected contexts. Fixes: a7a7be6087b0 ("net/sched: add sample action to the hardware intermediate representation") Signed-off-by: Vlad Buslov Reviewed-by: Pieter Jansen van Vuuren Signed-off-by: David S. Miller --- include/net/tc_act/tc_sample.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/tc_act/tc_sample.h b/include/net/tc_act/tc_sample.h index 0a559d4b6f0f..b4fce0fae645 100644 --- a/include/net/tc_act/tc_sample.h +++ b/include/net/tc_act/tc_sample.h @@ -44,7 +44,7 @@ static inline int tcf_sample_trunc_size(const struct tc_action *a) static inline struct psample_group * tcf_sample_psample_group(const struct tc_action *a) { - return rcu_dereference(to_sample(a)->psample_group); + return rcu_dereference_rtnl(to_sample(a)->psample_group); } #endif /* __NET_TC_SAMPLE_H */ -- cgit From f26e0cca14c9494c863d8fa6825b10bd12dc9eaa Mon Sep 17 00:00:00 2001 From: Nishka Dasgupta Date: Sun, 4 Aug 2019 21:00:18 +0530 Subject: net: dsa: qca8k: Add of_node_put() in qca8k_setup_mdio_bus() Each iteration of for_each_available_child_of_node() puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put() before the return. Additionally, the local variable ports in the function qca8k_setup_mdio_bus() takes the return value of of_get_child_by_name(), which gets a node but does not put it. If the function returns without putting ports, it may cause a memory leak. Hence put ports before the mid-loop return statement, and also outside the loop after its last usage in this function. Issues found with Coccinelle. Signed-off-by: Nishka Dasgupta Signed-off-by: David S. Miller --- drivers/net/dsa/qca8k.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index e429e92dedf4..16f15c93a102 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -583,8 +583,11 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv) for_each_available_child_of_node(ports, port) { err = of_property_read_u32(port, "reg", ®); - if (err) + if (err) { + of_node_put(port); + of_node_put(ports); return err; + } if (!dsa_is_user_port(priv->ds, reg)) continue; @@ -595,6 +598,7 @@ qca8k_setup_mdio_bus(struct qca8k_priv *priv) internal_mdio_mask |= BIT(reg); } + of_node_put(ports); if (!external_mdio_mask && !internal_mdio_mask) { dev_err(priv->dev, "no PHYs are defined.\n"); return -EINVAL; -- cgit From 6d7c7d948a2e9f87b4e7726dee94c59300e1786b Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Mon, 5 Aug 2019 01:38:44 +0300 Subject: net: dsa: sja1105: Fix broken learning with vlan_filtering disabled When put under a bridge with vlan_filtering 0, the SJA1105 ports will flood all traffic as if learning was broken. This is because learning interferes with the rx_vid's configured by dsa_8021q as unique pvid's. So learning technically still *does* work, it's just that the learnt entries never get matched due to their unique VLAN ID. The setting that saves the day is Shared VLAN Learning, which on this switch family works exactly as desired: VLAN tagging still works (untagged traffic gets the correct pvid) and FDB entries are still populated with the correct contents including VID. Also, a frame cannot violate the forwarding domain restrictions enforced by its classified VLAN. It is just that the VID is ignored when looking up the FDB for taking a forwarding decision (selecting the egress port). This patch activates SVL, and the result is that frames with a learnt DMAC are no longer flooded in the scenario described above. Now exactly *because* SVL works as desired, we have to revisit some earlier patches: - It is no longer necessary to manipulate the VID of the 'bridge fdb {add,del}' command when vlan_filtering is off. This is because now, SVL is enabled for that case, so the actual VID does not matter*. - It is still desirable to hide dsa_8021q VID's in the FDB dump callback. But right now the dump callback should no longer hide duplicates (one per each front panel port's pvid, plus one for the VLAN that the CPU port is going to tag a TX frame with), because there shouldn't be any (the switch will match a single FDB entry no matter its VID anyway). * Not really... It's no longer necessary to transform a 'bridge fdb add' into 5 fdb add operations, but the user might still add a fdb entry with any vid, and all of them would appear as duplicates in 'bridge fdb show'. So force a 'bridge fdb add' to insert the VID of 0**, so that we can prune the duplicates at insertion time. ** The VID of 0 is better than 1 because it is always guaranteed to be in the ports' hardware filter. DSA also avoids putting the VID inside the netlink response message towards the bridge driver when we return this particular VID, which makes it suitable for FDB entries learnt with vlan_filtering off. Fixes: 227d07a07ef1 ("net: dsa: sja1105: Add support for traffic through standalone ports") Signed-off-by: Vladimir Oltean Signed-off-by: Georg Waibel Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_main.c | 121 +++++++++++++++------------------ 1 file changed, 55 insertions(+), 66 deletions(-) diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index 6ed5f1e35789..b6d8ef0ab879 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -218,7 +218,7 @@ static int sja1105_init_l2_lookup_params(struct sja1105_private *priv) /* This selects between Independent VLAN Learning (IVL) and * Shared VLAN Learning (SVL) */ - .shared_learn = false, + .shared_learn = true, /* Don't discard management traffic based on ENFPORT - * we don't perform SMAC port enforcement anyway, so * what we are setting here doesn't matter. @@ -1092,8 +1092,13 @@ int sja1105pqrs_fdb_add(struct dsa_switch *ds, int port, l2_lookup.vlanid = vid; l2_lookup.iotag = SJA1105_S_TAG; l2_lookup.mask_macaddr = GENMASK_ULL(ETH_ALEN * 8 - 1, 0); - l2_lookup.mask_vlanid = VLAN_VID_MASK; - l2_lookup.mask_iotag = BIT(0); + if (dsa_port_is_vlan_filtering(&ds->ports[port])) { + l2_lookup.mask_vlanid = VLAN_VID_MASK; + l2_lookup.mask_iotag = BIT(0); + } else { + l2_lookup.mask_vlanid = 0; + l2_lookup.mask_iotag = 0; + } l2_lookup.destports = BIT(port); rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, @@ -1150,8 +1155,13 @@ int sja1105pqrs_fdb_del(struct dsa_switch *ds, int port, l2_lookup.vlanid = vid; l2_lookup.iotag = SJA1105_S_TAG; l2_lookup.mask_macaddr = GENMASK_ULL(ETH_ALEN * 8 - 1, 0); - l2_lookup.mask_vlanid = VLAN_VID_MASK; - l2_lookup.mask_iotag = BIT(0); + if (dsa_port_is_vlan_filtering(&ds->ports[port])) { + l2_lookup.mask_vlanid = VLAN_VID_MASK; + l2_lookup.mask_iotag = BIT(0); + } else { + l2_lookup.mask_vlanid = 0; + l2_lookup.mask_iotag = 0; + } l2_lookup.destports = BIT(port); rc = sja1105_dynamic_config_read(priv, BLK_IDX_L2_LOOKUP, @@ -1181,60 +1191,31 @@ static int sja1105_fdb_add(struct dsa_switch *ds, int port, const unsigned char *addr, u16 vid) { struct sja1105_private *priv = ds->priv; - u16 rx_vid, tx_vid; - int rc, i; - if (dsa_port_is_vlan_filtering(&ds->ports[port])) - return priv->info->fdb_add_cmd(ds, port, addr, vid); - - /* Since we make use of VLANs even when the bridge core doesn't tell us - * to, translate these FDB entries into the correct dsa_8021q ones. - * The basic idea (also repeats for removal below) is: - * - Each of the other front-panel ports needs to be able to forward a - * pvid-tagged (aka tagged with their rx_vid) frame that matches this - * DMAC. - * - The CPU port (aka the tx_vid of this port) needs to be able to - * send a frame matching this DMAC to the specified port. - * For a better picture see net/dsa/tag_8021q.c. + /* dsa_8021q is in effect when the bridge's vlan_filtering isn't, + * so the switch still does some VLAN processing internally. + * But Shared VLAN Learning (SVL) is also active, and it will take + * care of autonomous forwarding between the unique pvid's of each + * port. Here we just make sure that users can't add duplicate FDB + * entries when in this mode - the actual VID doesn't matter except + * for what gets printed in 'bridge fdb show'. In the case of zero, + * no VID gets printed at all. */ - for (i = 0; i < SJA1105_NUM_PORTS; i++) { - if (i == port) - continue; - if (i == dsa_upstream_port(priv->ds, port)) - continue; + if (!dsa_port_is_vlan_filtering(&ds->ports[port])) + vid = 0; - rx_vid = dsa_8021q_rx_vid(ds, i); - rc = priv->info->fdb_add_cmd(ds, port, addr, rx_vid); - if (rc < 0) - return rc; - } - tx_vid = dsa_8021q_tx_vid(ds, port); - return priv->info->fdb_add_cmd(ds, port, addr, tx_vid); + return priv->info->fdb_add_cmd(ds, port, addr, vid); } static int sja1105_fdb_del(struct dsa_switch *ds, int port, const unsigned char *addr, u16 vid) { struct sja1105_private *priv = ds->priv; - u16 rx_vid, tx_vid; - int rc, i; - if (dsa_port_is_vlan_filtering(&ds->ports[port])) - return priv->info->fdb_del_cmd(ds, port, addr, vid); + if (!dsa_port_is_vlan_filtering(&ds->ports[port])) + vid = 0; - for (i = 0; i < SJA1105_NUM_PORTS; i++) { - if (i == port) - continue; - if (i == dsa_upstream_port(priv->ds, port)) - continue; - - rx_vid = dsa_8021q_rx_vid(ds, i); - rc = priv->info->fdb_del_cmd(ds, port, addr, rx_vid); - if (rc < 0) - return rc; - } - tx_vid = dsa_8021q_tx_vid(ds, port); - return priv->info->fdb_del_cmd(ds, port, addr, tx_vid); + return priv->info->fdb_del_cmd(ds, port, addr, vid); } static int sja1105_fdb_dump(struct dsa_switch *ds, int port, @@ -1288,24 +1269,9 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port, l2_lookup.lockeds = (match >= 0); } - /* We need to hide the dsa_8021q VLANs from the user. This - * basically means hiding the duplicates and only showing - * the pvid that is supposed to be active in standalone and - * non-vlan_filtering modes (aka 1). - * - For statically added FDB entries (bridge fdb add), we - * can convert the TX VID (coming from the CPU port) into the - * pvid and ignore the RX VIDs of the other ports. - * - For dynamically learned FDB entries, a single entry with - * no duplicates is learned - that which has the real port's - * pvid, aka RX VID. - */ - if (!dsa_port_is_vlan_filtering(&ds->ports[port])) { - if (l2_lookup.vlanid == tx_vid || - l2_lookup.vlanid == rx_vid) - l2_lookup.vlanid = 1; - else - continue; - } + /* We need to hide the dsa_8021q VLANs from the user. */ + if (!dsa_port_is_vlan_filtering(&ds->ports[port])) + l2_lookup.vlanid = 0; cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data); } return 0; @@ -1597,6 +1563,7 @@ static int sja1105_vlan_prepare(struct dsa_switch *ds, int port, */ static int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled) { + struct sja1105_l2_lookup_params_entry *l2_lookup_params; struct sja1105_general_params_entry *general_params; struct sja1105_private *priv = ds->priv; struct sja1105_table *table; @@ -1625,6 +1592,28 @@ static int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled) general_params->incl_srcpt1 = enabled; general_params->incl_srcpt0 = enabled; + /* VLAN filtering => independent VLAN learning. + * No VLAN filtering => shared VLAN learning. + * + * In shared VLAN learning mode, untagged traffic still gets + * pvid-tagged, and the FDB table gets populated with entries + * containing the "real" (pvid or from VLAN tag) VLAN ID. + * However the switch performs a masked L2 lookup in the FDB, + * effectively only looking up a frame's DMAC (and not VID) for the + * forwarding decision. + * + * This is extremely convenient for us, because in modes with + * vlan_filtering=0, dsa_8021q actually installs unique pvid's into + * each front panel port. This is good for identification but breaks + * learning badly - the VID of the learnt FDB entry is unique, aka + * no frames coming from any other port are going to have it. So + * for forwarding purposes, this is as though learning was broken + * (all frames get flooded). + */ + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS]; + l2_lookup_params = table->entries; + l2_lookup_params->shared_learn = !enabled; + rc = sja1105_static_config_reload(priv); if (rc) dev_err(ds->dev, "Failed to change VLAN Ethertype\n"); -- cgit From 4b7da3d808f91cdad3e34059cd68ba3dfe4c3695 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Mon, 5 Aug 2019 01:38:45 +0300 Subject: net: dsa: sja1105: Use the LOCKEDS bit for SJA1105 E/T as well It looks like the FDB dump taken from first-generation switches also contains information on whether entries are static or not. So use that instead of searching through the driver's tables. Fixes: d763778224ea ("net: dsa: sja1105: Implement is_static for FDB entries on E/T") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_dynamic_config.c | 14 +++++++++++++- drivers/net/dsa/sja1105/sja1105_main.c | 15 --------------- 2 files changed, 13 insertions(+), 16 deletions(-) diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c index 6bfb1696a6f2..9988c9d18567 100644 --- a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c +++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c @@ -277,6 +277,18 @@ sja1105et_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, SJA1105ET_SIZE_L2_LOOKUP_ENTRY, op); } +static size_t sja1105et_dyn_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_lookup_entry *entry = entry_ptr; + u8 *cmd = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(cmd, &entry->lockeds, 28, 28, size, op); + + return sja1105et_l2_lookup_entry_packing(buf, entry_ptr, op); +} + static void sja1105et_mgmt_route_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, enum packing_op op) @@ -477,7 +489,7 @@ sja1105et_general_params_entry_packing(void *buf, void *entry_ptr, /* SJA1105E/T: First generation */ struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN] = { [BLK_IDX_L2_LOOKUP] = { - .entry_packing = sja1105et_l2_lookup_entry_packing, + .entry_packing = sja1105et_dyn_l2_lookup_entry_packing, .cmd_packing = sja1105et_l2_lookup_cmd_packing, .access = (OP_READ | OP_WRITE | OP_DEL), .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index b6d8ef0ab879..a573ae136ebd 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -1254,21 +1254,6 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port, continue; u64_to_ether_addr(l2_lookup.macaddr, macaddr); - /* On SJA1105 E/T, the switch doesn't implement the LOCKEDS - * bit, so it doesn't tell us whether a FDB entry is static - * or not. - * But, of course, we can find out - we're the ones who added - * it in the first place. - */ - if (priv->info->device_id == SJA1105E_DEVICE_ID || - priv->info->device_id == SJA1105T_DEVICE_ID) { - int match; - - match = sja1105_find_static_fdb_entry(priv, port, - &l2_lookup); - l2_lookup.lockeds = (match >= 0); - } - /* We need to hide the dsa_8021q VLANs from the user. */ if (!dsa_port_is_vlan_filtering(&ds->ports[port])) l2_lookup.vlanid = 0; -- cgit From 6cb0abbdf90c180e1310976c47399f57477e0e53 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Mon, 5 Aug 2019 01:38:46 +0300 Subject: net: dsa: sja1105: Really fix panic on unregistering PTP clock The IS_ERR_OR_NULL(priv->clock) check inside sja1105_ptp_clock_unregister() is preventing cancel_delayed_work_sync from actually being run. Additionally, sja1105_ptp_clock_unregister() does not actually get run, when placed in sja1105_remove(). The DSA switch gets torn down, but the sja1105 module does not get unregistered. So sja1105_ptp_clock_unregister needs to be moved to sja1105_teardown, to be symmetrical with sja1105_ptp_clock_register which is called from the DSA sja1105_setup. It is strange to fix a "fixes" patch, but the probe failure can only be seen when the attached PHY does not respond to MDIO (issue which I can't pinpoint the reason to) and it goes away after I power-cycle the board. This time the patch was validated on a failing board, and the kernel panic from the fixed commit's message can no longer be seen. Fixes: 29dd908d355f ("net: dsa: sja1105: Cancel PTP delayed work on unregister") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- drivers/net/dsa/sja1105/sja1105_main.c | 4 ++-- drivers/net/dsa/sja1105/sja1105_ptp.c | 7 +++---- 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index a573ae136ebd..d073baffc20b 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -1728,6 +1728,8 @@ static void sja1105_teardown(struct dsa_switch *ds) cancel_work_sync(&priv->tagger_data.rxtstamp_work); skb_queue_purge(&priv->tagger_data.skb_rxtstamp_queue); + sja1105_ptp_clock_unregister(priv); + sja1105_static_config_free(&priv->static_config); } static int sja1105_mgmt_xmit(struct dsa_switch *ds, int port, int slot, @@ -2185,9 +2187,7 @@ static int sja1105_remove(struct spi_device *spi) { struct sja1105_private *priv = spi_get_drvdata(spi); - sja1105_ptp_clock_unregister(priv); dsa_unregister_switch(priv->ds); - sja1105_static_config_free(&priv->static_config); return 0; } diff --git a/drivers/net/dsa/sja1105/sja1105_ptp.c b/drivers/net/dsa/sja1105/sja1105_ptp.c index d19cfdf681af..d8e8dd59f3d1 100644 --- a/drivers/net/dsa/sja1105/sja1105_ptp.c +++ b/drivers/net/dsa/sja1105/sja1105_ptp.c @@ -369,16 +369,15 @@ int sja1105_ptp_clock_register(struct sja1105_private *priv) .mult = SJA1105_CC_MULT, }; mutex_init(&priv->ptp_lock); - INIT_DELAYED_WORK(&priv->refresh_work, sja1105_ptp_overflow_check); - - schedule_delayed_work(&priv->refresh_work, SJA1105_REFRESH_INTERVAL); - priv->ptp_caps = sja1105_ptp_caps; priv->clock = ptp_clock_register(&priv->ptp_caps, ds->dev); if (IS_ERR_OR_NULL(priv->clock)) return PTR_ERR(priv->clock); + INIT_DELAYED_WORK(&priv->refresh_work, sja1105_ptp_overflow_check); + schedule_delayed_work(&priv->refresh_work, SJA1105_REFRESH_INTERVAL); + return sja1105_ptp_reset(priv); } -- cgit From f163fed2764e66511fb5c489bf87e532ad7606fb Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Mon, 5 Aug 2019 01:38:47 +0300 Subject: net: dsa: sja1105: Fix memory leak on meta state machine normal path After a meta frame is received, it is associated with the cached sp->data->stampable_skb from the DSA tagger private structure. Cached means its refcount is incremented with skb_get() in order for dsa_switch_rcv() to not free it when the tagger .rcv returns NULL. The mistake is that skb_unref() is not the correct function to use. It will correctly decrement the refcount (which will go back to zero) but the skb memory will not be freed. That is the job of kfree_skb(), which also calls skb_unref(). But it turns out that freeing the cached stampable_skb is in fact not necessary. It is still a perfectly valid skb, and now it is even annotated with the partial RX timestamp. So remove the skb_copy() altogether and simply pass the stampable_skb with a refcount of 1 (incremented by us, decremented by dsa_switch_rcv) up the stack. Fixes: f3097be21bf1 ("net: dsa: sja1105: Add a state machine for RX timestamping") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- net/dsa/tag_sja1105.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/net/dsa/tag_sja1105.c b/net/dsa/tag_sja1105.c index 26363d72d25b..8fa8dda8a15b 100644 --- a/net/dsa/tag_sja1105.c +++ b/net/dsa/tag_sja1105.c @@ -211,17 +211,8 @@ static struct sk_buff * for further processing up the network stack. */ kfree_skb(skb); - - skb = skb_copy(stampable_skb, GFP_ATOMIC); - if (!skb) { - dev_err_ratelimited(dp->ds->dev, - "Failed to copy stampable skb\n"); - spin_unlock(&sp->data->meta_lock); - return NULL; - } + skb = stampable_skb; sja1105_transfer_meta(skb, meta); - /* The cached copy will be freed now */ - skb_unref(stampable_skb); spin_unlock(&sp->data->meta_lock); } -- cgit From 93fa8587b25356382a39f1ca3a81d6c1b42ac731 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Mon, 5 Aug 2019 01:38:48 +0300 Subject: net: dsa: sja1105: Fix memory leak on meta state machine error path When RX timestamping is enabled and two link-local (non-meta) frames are received in a row, this constitutes an error. The tagger is always caching the last link-local frame, in an attempt to merge it with the meta follow-up frame when that arrives. To recover from the above error condition, the initial cached link-local frame is dropped and the second frame in a row is cached (in expectance of the second meta frame). However, when dropping the initial link-local frame, its backing memory was being leaked. Fixes: f3097be21bf1 ("net: dsa: sja1105: Add a state machine for RX timestamping") Signed-off-by: Vladimir Oltean Signed-off-by: David S. Miller --- net/dsa/tag_sja1105.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/dsa/tag_sja1105.c b/net/dsa/tag_sja1105.c index 8fa8dda8a15b..47ee88163a9d 100644 --- a/net/dsa/tag_sja1105.c +++ b/net/dsa/tag_sja1105.c @@ -165,6 +165,7 @@ static struct sk_buff "Expected meta frame, is %12llx " "in the DSA master multicast filter?\n", SJA1105_META_DMAC); + kfree_skb(sp->data->stampable_skb); } /* Hold a reference to avoid dsa_switch_rcv -- cgit From 713203e303ca9f75be8c729b533bf1559e442f6e Mon Sep 17 00:00:00 2001 From: Atish Patra Date: Fri, 2 Aug 2019 21:27:20 -0700 Subject: RISC-V: Remove per cpu clocksource There is only one clocksource in RISC-V. The boot cpu initializes that clocksource. No need to keep a percpu data structure. Signed-off-by: Atish Patra Signed-off-by: Paul Walmsley Acked-by: Daniel Lezcano --- drivers/clocksource/timer-riscv.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c index 5e6038fbf115..09e031176bc6 100644 --- a/drivers/clocksource/timer-riscv.c +++ b/drivers/clocksource/timer-riscv.c @@ -55,7 +55,7 @@ static u64 riscv_sched_clock(void) return get_cycles64(); } -static DEFINE_PER_CPU(struct clocksource, riscv_clocksource) = { +static struct clocksource riscv_clocksource = { .name = "riscv_clocksource", .rating = 300, .mask = CLOCKSOURCE_MASK(64), @@ -92,7 +92,6 @@ void riscv_timer_interrupt(void) static int __init riscv_timer_init_dt(struct device_node *n) { int cpuid, hartid, error; - struct clocksource *cs; hartid = riscv_of_processor_hartid(n); if (hartid < 0) { @@ -112,8 +111,7 @@ static int __init riscv_timer_init_dt(struct device_node *n) pr_info("%s: Registering clocksource cpuid [%d] hartid [%d]\n", __func__, cpuid, hartid); - cs = per_cpu_ptr(&riscv_clocksource, cpuid); - error = clocksource_register_hz(cs, riscv_timebase); + error = clocksource_register_hz(&riscv_clocksource, riscv_timebase); if (error) { pr_err("RISCV timer register failed [%d] for cpu = [%d]\n", error, cpuid); -- cgit From d9dfe768b3f30faa8340cbf34196668714780c3c Mon Sep 17 00:00:00 2001 From: Marek Olšák Date: Fri, 2 Aug 2019 17:44:06 -0400 Subject: Revert "drm/amdgpu: fix transform feedback GDS hang on gfx10 (v2)" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 9ed2c993d723129f85101e51b2ccc36ef5400a67. SET_CONFIG_REG writes to memory if register shadowing is enabled, causing a VM fault. NGG streamout is unstable anyway, so all UMDs should use legacy streamout. I think Mesa is the only driver using NGG streamout. Signed-off-by: Marek Olšák Reviewed-by: Le Ma Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_gds.h | 1 - drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c | 12 +----------- 2 files changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gds.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_gds.h index df8a23554831..f6ac1e9548f2 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gds.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gds.h @@ -32,7 +32,6 @@ struct amdgpu_gds { uint32_t gws_size; uint32_t oa_size; uint32_t gds_compute_max_wave_id; - uint32_t vgt_gs_max_wave_id; }; struct amdgpu_gds_reg_offset { diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c index 32773b7523d2..f41287f9000d 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c @@ -4206,15 +4206,6 @@ static void gfx_v10_0_ring_emit_ib_gfx(struct amdgpu_ring *ring, unsigned vmid = AMDGPU_JOB_GET_VMID(job); u32 header, control = 0; - /* Prevent a hw deadlock due to a wave ID mismatch between ME and GDS. - * This resets the wave ID counters. (needed by transform feedback) - * TODO: This might only be needed on a VMID switch when we change - * the GDS OA mapping, not sure. - */ - amdgpu_ring_write(ring, PACKET3(PACKET3_SET_CONFIG_REG, 1)); - amdgpu_ring_write(ring, mmVGT_GS_MAX_WAVE_ID); - amdgpu_ring_write(ring, ring->adev->gds.vgt_gs_max_wave_id); - if (ib->flags & AMDGPU_IB_FLAG_CE) header = PACKET3(PACKET3_INDIRECT_BUFFER_CNST, 2); else @@ -4961,7 +4952,7 @@ static const struct amdgpu_ring_funcs gfx_v10_0_ring_funcs_gfx = { 5 + /* HDP_INVL */ 8 + 8 + /* FENCE x2 */ 2, /* SWITCH_BUFFER */ - .emit_ib_size = 7, /* gfx_v10_0_ring_emit_ib_gfx */ + .emit_ib_size = 4, /* gfx_v10_0_ring_emit_ib_gfx */ .emit_ib = gfx_v10_0_ring_emit_ib_gfx, .emit_fence = gfx_v10_0_ring_emit_fence, .emit_pipeline_sync = gfx_v10_0_ring_emit_pipeline_sync, @@ -5112,7 +5103,6 @@ static void gfx_v10_0_set_gds_init(struct amdgpu_device *adev) default: adev->gds.gds_size = 0x10000; adev->gds.gds_compute_max_wave_id = 0x4ff; - adev->gds.vgt_gs_max_wave_id = 0x3ff; break; } -- cgit From 3d92aa45fbfd7319e3a19f4ec59fd32b3862b723 Mon Sep 17 00:00:00 2001 From: Wenwen Wang Date: Wed, 7 Aug 2019 04:08:51 -0500 Subject: ALSA: hiface: fix multiple memory leak bugs In hiface_pcm_init(), 'rt' is firstly allocated through kzalloc(). Later on, hiface_pcm_init_urb() is invoked to initialize 'rt->out_urbs[i]'. In hiface_pcm_init_urb(), 'rt->out_urbs[i].buffer' is allocated through kzalloc(). However, if hiface_pcm_init_urb() fails, both 'rt' and 'rt->out_urbs[i].buffer' are not deallocated, leading to memory leak bugs. Also, 'rt->out_urbs[i].buffer' is not deallocated if snd_pcm_new() fails. To fix the above issues, free 'rt' and 'rt->out_urbs[i].buffer'. Fixes: a91c3fb2f842 ("Add M2Tech hiFace USB-SPDIF driver") Signed-off-by: Wenwen Wang Cc: Signed-off-by: Takashi Iwai --- sound/usb/hiface/pcm.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/sound/usb/hiface/pcm.c b/sound/usb/hiface/pcm.c index 14fc1e1d5d13..c406497c5919 100644 --- a/sound/usb/hiface/pcm.c +++ b/sound/usb/hiface/pcm.c @@ -600,14 +600,13 @@ int hiface_pcm_init(struct hiface_chip *chip, u8 extra_freq) ret = hiface_pcm_init_urb(&rt->out_urbs[i], chip, OUT_EP, hiface_pcm_out_urb_handler); if (ret < 0) - return ret; + goto error; } ret = snd_pcm_new(chip->card, "USB-SPDIF Audio", 0, 1, 0, &pcm); if (ret < 0) { - kfree(rt); dev_err(&chip->dev->dev, "Cannot create pcm instance\n"); - return ret; + goto error; } pcm->private_data = rt; @@ -620,4 +619,10 @@ int hiface_pcm_init(struct hiface_chip *chip, u8 extra_freq) chip->pcm = rt; return 0; + +error: + for (i = 0; i < PCM_N_URBS; i++) + kfree(rt->out_urbs[i].buffer); + kfree(rt); + return ret; } -- cgit From 0617bdede5114a0002298b12cd0ca2b0cfd0395d Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 7 Aug 2019 13:57:18 +0300 Subject: Revert "PCI: Add missing link delays required by the PCIe spec" Commit c2bf1fc212f7 ("PCI: Add missing link delays required by the PCIe spec") turned out causing issues with some systems either by making them unresponsive or slowing down runtime and system wide resume of PCIe devices. While root cause for the unresponsiveness is still under investigation given the amount of issues reported better to revert it for now. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204413 Link: https://lore.kernel.org/linux-pci/SL2P216MB01878BBCD75F21D882AEEA2880C60@SL2P216MB0187.KORP216.PROD.OUTLOOK.COM/ Link: https://lore.kernel.org/linux-pci/2857501d-c167-547d-c57d-d5d24ea1f1dc@molgen.mpg.de/ Reported-by: Matthias Andree Reported-by: Paul Menzel Reported-by: Nicholas Johnson Signed-off-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki --- drivers/pci/pci.c | 29 +++++++----------- drivers/pci/pci.h | 1 - drivers/pci/pcie/portdrv_core.c | 66 ----------------------------------------- 3 files changed, 10 insertions(+), 86 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 29ed5ec1ac27..1b27b5af3d55 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1025,10 +1025,15 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state) if (state == PCI_D0) { pci_platform_power_transition(dev, PCI_D0); /* - * Mandatory power management transition delays are - * handled in the PCIe portdrv resume hooks. + * Mandatory power management transition delays, see + * PCI Express Base Specification Revision 2.0 Section + * 6.6.1: Conventional Reset. Do not delay for + * devices powered on/off by corresponding bridge, + * because have already delayed for the bridge. */ if (dev->runtime_d3cold) { + if (dev->d3cold_delay && !dev->imm_ready) + msleep(dev->d3cold_delay); /* * When powering on a bridge from D3cold, the * whole hierarchy may be powered on into @@ -4602,16 +4607,14 @@ static int pci_pm_reset(struct pci_dev *dev, int probe) return pci_dev_wait(dev, "PM D3->D0", PCIE_RESET_READY_POLL_MS); } - /** - * pcie_wait_for_link_delay - Wait until link is active or inactive + * pcie_wait_for_link - Wait until link is active or inactive * @pdev: Bridge device * @active: waiting for active or inactive? - * @delay: Delay to wait after link has become active (in ms) * * Use this to wait till link becomes active or inactive. */ -bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay) +bool pcie_wait_for_link(struct pci_dev *pdev, bool active) { int timeout = 1000; bool ret; @@ -4648,25 +4651,13 @@ bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay) timeout -= 10; } if (active && ret) - msleep(delay); + msleep(100); else if (ret != active) pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n", active ? "set" : "cleared"); return ret == active; } -/** - * pcie_wait_for_link - Wait until link is active or inactive - * @pdev: Bridge device - * @active: waiting for active or inactive? - * - * Use this to wait till link becomes active or inactive. - */ -bool pcie_wait_for_link(struct pci_dev *pdev, bool active) -{ - return pcie_wait_for_link_delay(pdev, active, 100); -} - void pci_reset_secondary_bus(struct pci_dev *dev) { u16 ctrl; diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 1be03a97cb92..d22d1b807701 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -497,7 +497,6 @@ static inline int pci_dev_specific_disable_acs_redir(struct pci_dev *dev) void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state, u32 service); -bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay); bool pcie_wait_for_link(struct pci_dev *pdev, bool active); #ifdef CONFIG_PCIEASPM void pcie_aspm_init_link_state(struct pci_dev *pdev); diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 308c3e0c4a34..1b330129089f 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -9,7 +9,6 @@ #include #include #include -#include #include #include #include @@ -379,67 +378,6 @@ static int pm_iter(struct device *dev, void *data) return 0; } -static int get_downstream_delay(struct pci_bus *bus) -{ - struct pci_dev *pdev; - int min_delay = 100; - int max_delay = 0; - - list_for_each_entry(pdev, &bus->devices, bus_list) { - if (!pdev->imm_ready) - min_delay = 0; - else if (pdev->d3cold_delay < min_delay) - min_delay = pdev->d3cold_delay; - if (pdev->d3cold_delay > max_delay) - max_delay = pdev->d3cold_delay; - } - - return max(min_delay, max_delay); -} - -/* - * wait_for_downstream_link - Wait for downstream link to establish - * @pdev: PCIe port whose downstream link is waited - * - * Handle delays according to PCIe 4.0 section 6.6.1 before configuration - * access to the downstream component is permitted. - * - * This blocks PCI core resume of the hierarchy below this port until the - * link is trained. Should be called before resuming port services to - * prevent pciehp from starting to tear-down the hierarchy too soon. - */ -static void wait_for_downstream_link(struct pci_dev *pdev) -{ - int delay; - - if (pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT && - pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM) - return; - - if (pci_dev_is_disconnected(pdev)) - return; - - if (!pdev->subordinate || list_empty(&pdev->subordinate->devices) || - !pdev->bridge_d3) - return; - - delay = get_downstream_delay(pdev->subordinate); - if (!delay) - return; - - dev_dbg(&pdev->dev, "waiting downstream link for %d ms\n", delay); - - /* - * If downstream port does not support speeds greater than 5 GT/s - * need to wait 100ms. For higher speeds (gen3) we need to wait - * first for the data link layer to become active. - */ - if (pcie_get_speed_cap(pdev) <= PCIE_SPEED_5_0GT) - msleep(delay); - else - pcie_wait_for_link_delay(pdev, true, delay); -} - /** * pcie_port_device_suspend - suspend port services associated with a PCIe port * @dev: PCI Express port to handle @@ -453,8 +391,6 @@ int pcie_port_device_suspend(struct device *dev) int pcie_port_device_resume_noirq(struct device *dev) { size_t off = offsetof(struct pcie_port_service_driver, resume_noirq); - - wait_for_downstream_link(to_pci_dev(dev)); return device_for_each_child(dev, &off, pm_iter); } @@ -485,8 +421,6 @@ int pcie_port_device_runtime_suspend(struct device *dev) int pcie_port_device_runtime_resume(struct device *dev) { size_t off = offsetof(struct pcie_port_service_driver, runtime_resume); - - wait_for_downstream_link(to_pci_dev(dev)); return device_for_each_child(dev, &off, pm_iter); } #endif /* PM */ -- cgit From c02f77d32d2c45cfb1b2bb99eabd8a78f5ecc7db Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 6 Aug 2019 17:31:48 +0200 Subject: ALSA: hda - Workaround for crackled sound on AMD controller (1022:1457) A long-time problem on the recent AMD chip (X370, X470, B450, etc with PCI ID 1022:1457) with Realtek codecs is the crackled or distorted sound for capture streams, as well as occasional playback hiccups. After lengthy debugging sessions, the workarounds we've found are like the following: - Set up the proper driver caps for this controller, similar as the other AMD controller. - Correct the DMA position reporting with the fixed FIFO size, which is similar like as workaround used for VIA chip set. - Even after the position correction, PulseAudio still shows mysterious stalls of playback streams when a capture is triggered in timer-scheduled mode. Since we have no clear way to eliminate the stall, pass the BATCH PCM flag for PA to suppress the tsched mode as a temporary workaround. This patch implements the workarounds. For the driver caps, it defines a new preset, AXZ_DCAPS_PRESET_AMD_SB. It enables the FIFO- corrected position reporting (corresponding to the new position_fix=6) and enforces the SNDRV_PCM_INFO_BATCH flag. Note that the current implementation is merely a workaround. Hopefully we'll find a better alternative in future, especially about removing the BATCH flag hack again. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195303 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_controller.c | 7 +++++ sound/pci/hda/hda_controller.h | 2 +- sound/pci/hda/hda_intel.c | 63 +++++++++++++++++++++++++++++++++++++++++- 3 files changed, 70 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c index 2fbdde239936..48d863736b3c 100644 --- a/sound/pci/hda/hda_controller.c +++ b/sound/pci/hda/hda_controller.c @@ -613,6 +613,13 @@ static int azx_pcm_open(struct snd_pcm_substream *substream) 20, 178000000); + /* by some reason, the playback stream stalls on PulseAudio with + * tsched=1 when a capture stream triggers. Until we figure out the + * real cause, disable tsched mode by telling the PCM info flag. + */ + if (chip->driver_caps & AZX_DCAPS_AMD_WORKAROUND) + runtime->hw.info |= SNDRV_PCM_INFO_BATCH; + if (chip->align_buffer_size) /* constrain buffer sizes to be multiple of 128 bytes. This is more efficient in terms of memory diff --git a/sound/pci/hda/hda_controller.h b/sound/pci/hda/hda_controller.h index baa15374fbcb..f2a6df5e6bcb 100644 --- a/sound/pci/hda/hda_controller.h +++ b/sound/pci/hda/hda_controller.h @@ -31,7 +31,7 @@ /* 14 unused */ #define AZX_DCAPS_CTX_WORKAROUND (1 << 15) /* X-Fi workaround */ #define AZX_DCAPS_POSFIX_LPIB (1 << 16) /* Use LPIB as default */ -/* 17 unused */ +#define AZX_DCAPS_AMD_WORKAROUND (1 << 17) /* AMD-specific workaround */ #define AZX_DCAPS_NO_64BIT (1 << 18) /* No 64bit address */ #define AZX_DCAPS_SYNC_WRITE (1 << 19) /* sync each cmd write */ #define AZX_DCAPS_OLD_SSYNC (1 << 20) /* Old SSYNC reg for ICH */ diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 1e14d7270adf..a6d8c0d77b84 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -64,6 +64,7 @@ enum { POS_FIX_VIACOMBO, POS_FIX_COMBO, POS_FIX_SKL, + POS_FIX_FIFO, }; /* Defines for ATI HD Audio support in SB450 south bridge */ @@ -135,7 +136,7 @@ module_param_array(model, charp, NULL, 0444); MODULE_PARM_DESC(model, "Use the given board model."); module_param_array(position_fix, int, NULL, 0444); MODULE_PARM_DESC(position_fix, "DMA pointer read method." - "(-1 = system default, 0 = auto, 1 = LPIB, 2 = POSBUF, 3 = VIACOMBO, 4 = COMBO, 5 = SKL+)."); + "(-1 = system default, 0 = auto, 1 = LPIB, 2 = POSBUF, 3 = VIACOMBO, 4 = COMBO, 5 = SKL+, 6 = FIFO)."); module_param_array(bdl_pos_adj, int, NULL, 0644); MODULE_PARM_DESC(bdl_pos_adj, "BDL position adjustment offset."); module_param_array(probe_mask, int, NULL, 0444); @@ -332,6 +333,11 @@ enum { #define AZX_DCAPS_PRESET_ATI_HDMI_NS \ (AZX_DCAPS_PRESET_ATI_HDMI | AZX_DCAPS_SNOOP_OFF) +/* quirks for AMD SB */ +#define AZX_DCAPS_PRESET_AMD_SB \ + (AZX_DCAPS_NO_TCSEL | AZX_DCAPS_SYNC_WRITE | AZX_DCAPS_AMD_WORKAROUND |\ + AZX_DCAPS_SNOOP_TYPE(ATI) | AZX_DCAPS_PM_RUNTIME) + /* quirks for Nvidia */ #define AZX_DCAPS_PRESET_NVIDIA \ (AZX_DCAPS_NO_MSI | AZX_DCAPS_CORBRP_SELF_CLEAR |\ @@ -841,6 +847,49 @@ static unsigned int azx_via_get_position(struct azx *chip, return bound_pos + mod_dma_pos; } +#define AMD_FIFO_SIZE 32 + +/* get the current DMA position with FIFO size correction */ +static unsigned int azx_get_pos_fifo(struct azx *chip, struct azx_dev *azx_dev) +{ + struct snd_pcm_substream *substream = azx_dev->core.substream; + struct snd_pcm_runtime *runtime = substream->runtime; + unsigned int pos, delay; + + pos = snd_hdac_stream_get_pos_lpib(azx_stream(azx_dev)); + if (!runtime) + return pos; + + runtime->delay = AMD_FIFO_SIZE; + delay = frames_to_bytes(runtime, AMD_FIFO_SIZE); + if (azx_dev->insufficient) { + if (pos < delay) { + delay = pos; + runtime->delay = bytes_to_frames(runtime, pos); + } else { + azx_dev->insufficient = 0; + } + } + + /* correct the DMA position for capture stream */ + if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) { + if (pos < delay) + pos += azx_dev->core.bufsize; + pos -= delay; + } + + return pos; +} + +static int azx_get_delay_from_fifo(struct azx *chip, struct azx_dev *azx_dev, + unsigned int pos) +{ + struct snd_pcm_substream *substream = azx_dev->core.substream; + + /* just read back the calculated value in the above */ + return substream->runtime->delay; +} + static unsigned int azx_skl_get_dpib_pos(struct azx *chip, struct azx_dev *azx_dev) { @@ -1417,6 +1466,7 @@ static int check_position_fix(struct azx *chip, int fix) case POS_FIX_VIACOMBO: case POS_FIX_COMBO: case POS_FIX_SKL: + case POS_FIX_FIFO: return fix; } @@ -1433,6 +1483,10 @@ static int check_position_fix(struct azx *chip, int fix) dev_dbg(chip->card->dev, "Using VIACOMBO position fix\n"); return POS_FIX_VIACOMBO; } + if (chip->driver_caps & AZX_DCAPS_AMD_WORKAROUND) { + dev_dbg(chip->card->dev, "Using FIFO position fix\n"); + return POS_FIX_FIFO; + } if (chip->driver_caps & AZX_DCAPS_POSFIX_LPIB) { dev_dbg(chip->card->dev, "Using LPIB position fix\n"); return POS_FIX_LPIB; @@ -1453,6 +1507,7 @@ static void assign_position_fix(struct azx *chip, int fix) [POS_FIX_VIACOMBO] = azx_via_get_position, [POS_FIX_COMBO] = azx_get_pos_lpib, [POS_FIX_SKL] = azx_get_pos_skl, + [POS_FIX_FIFO] = azx_get_pos_fifo, }; chip->get_position[0] = chip->get_position[1] = callbacks[fix]; @@ -1467,6 +1522,9 @@ static void assign_position_fix(struct azx *chip, int fix) azx_get_delay_from_lpib; } + if (fix == POS_FIX_FIFO) + chip->get_delay[0] = chip->get_delay[1] = + azx_get_delay_from_fifo; } /* @@ -2447,6 +2505,9 @@ static const struct pci_device_id azx_ids[] = { /* AMD Hudson */ { PCI_DEVICE(0x1022, 0x780d), .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB }, + /* AMD, X370 & co */ + { PCI_DEVICE(0x1022, 0x1457), + .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_AMD_SB }, /* AMD Stoney */ { PCI_DEVICE(0x1022, 0x157a), .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB | -- cgit From 4ab9ab656a6cea5257bfa31f00c922d68f7a5c2f Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 5 Aug 2019 14:56:54 -0500 Subject: x86/ptrace: Mark expected switch fall-through Mark switch cases where we are expecting to fall through. Fix the following warning (Building: allnoconfig i386): arch/x86/kernel/ptrace.c:202:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (unlikely(value == 0)) ^ arch/x86/kernel/ptrace.c:206:2: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva Signed-off-by: Thomas Gleixner Reviewed-by: Kees Cook Link: https://lkml.kernel.org/r/20190805195654.GA17831@embeddedor --- arch/x86/kernel/ptrace.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 0fdbe89d0754..3c5bbe8e4120 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -201,6 +201,7 @@ static int set_segment_reg(struct task_struct *task, case offsetof(struct user_regs_struct, ss): if (unlikely(value == 0)) return -EIO; + /* Else, fall through */ default: *pt_regs_access(task_pt_regs(task), offset) = value; -- cgit From 7468a4eae541ce5aff65595aa502aa0a4def6615 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 5 Aug 2019 15:17:12 -0500 Subject: x86: mtrr: cyrix: Mark expected switch fall-through Mark switch cases where we are expecting to fall through. Fix the following warning (Building: i386_defconfig i386): arch/x86/kernel/cpu/mtrr/cyrix.c:99:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Gustavo A. R. Silva Signed-off-by: Thomas Gleixner Reviewed-by: Kees Cook Link: https://lkml.kernel.org/r/20190805201712.GA19927@embeddedor --- arch/x86/kernel/cpu/mtrr/cyrix.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/cpu/mtrr/cyrix.c b/arch/x86/kernel/cpu/mtrr/cyrix.c index 4296c702a3f7..72182809b333 100644 --- a/arch/x86/kernel/cpu/mtrr/cyrix.c +++ b/arch/x86/kernel/cpu/mtrr/cyrix.c @@ -98,6 +98,7 @@ cyrix_get_free_region(unsigned long base, unsigned long size, int replace_reg) case 7: if (size < 0x40) break; + /* Else, fall through */ case 6: case 5: case 4: -- cgit From 4b3e30ed3ec7864e798403a63ff2e96bd0c19ab0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 7 Aug 2019 00:23:07 -0500 Subject: Revert "drm/amdkfd: New IOCTL to allocate queue GWS" This reverts commit 1a058c3376765ee31d65e28cbbb9d4ff15120056. This interface is still in too much flux. Revert until it's sorted out. Acked-by: Oak Zeng Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 28 ---------------------------- include/uapi/linux/kfd_ioctl.h | 20 +------------------- 2 files changed, 1 insertion(+), 47 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c index 26b15cc56c31..1d3cd5c50d5f 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c @@ -1567,32 +1567,6 @@ copy_from_user_failed: return err; } -static int kfd_ioctl_alloc_queue_gws(struct file *filep, - struct kfd_process *p, void *data) -{ - int retval; - struct kfd_ioctl_alloc_queue_gws_args *args = data; - struct kfd_dev *dev; - - if (!hws_gws_support) - return -ENODEV; - - dev = kfd_device_by_id(args->gpu_id); - if (!dev) { - pr_debug("Could not find gpu id 0x%x\n", args->gpu_id); - return -ENODEV; - } - if (dev->dqm->sched_policy == KFD_SCHED_POLICY_NO_HWS) - return -ENODEV; - - mutex_lock(&p->mutex); - retval = pqm_set_gws(&p->pqm, args->queue_id, args->num_gws ? dev->gws : NULL); - mutex_unlock(&p->mutex); - - args->first_gws = 0; - return retval; -} - static int kfd_ioctl_get_dmabuf_info(struct file *filep, struct kfd_process *p, void *data) { @@ -1795,8 +1769,6 @@ static const struct amdkfd_ioctl_desc amdkfd_ioctls[] = { AMDKFD_IOCTL_DEF(AMDKFD_IOC_IMPORT_DMABUF, kfd_ioctl_import_dmabuf, 0), - AMDKFD_IOCTL_DEF(AMDKFD_IOC_ALLOC_QUEUE_GWS, - kfd_ioctl_alloc_queue_gws, 0), }; #define AMDKFD_CORE_IOCTL_COUNT ARRAY_SIZE(amdkfd_ioctls) diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h index 070d1bc7e725..20917c59f39c 100644 --- a/include/uapi/linux/kfd_ioctl.h +++ b/include/uapi/linux/kfd_ioctl.h @@ -410,21 +410,6 @@ struct kfd_ioctl_unmap_memory_from_gpu_args { __u32 n_success; /* to/from KFD */ }; -/* Allocate GWS for specific queue - * - * @gpu_id: device identifier - * @queue_id: queue's id that GWS is allocated for - * @num_gws: how many GWS to allocate - * @first_gws: index of the first GWS allocated. - * only support contiguous GWS allocation - */ -struct kfd_ioctl_alloc_queue_gws_args { - __u32 gpu_id; /* to KFD */ - __u32 queue_id; /* to KFD */ - __u32 num_gws; /* to KFD */ - __u32 first_gws; /* from KFD */ -}; - struct kfd_ioctl_get_dmabuf_info_args { __u64 size; /* from KFD */ __u64 metadata_ptr; /* to KFD */ @@ -544,10 +529,7 @@ enum kfd_mmio_remap { #define AMDKFD_IOC_IMPORT_DMABUF \ AMDKFD_IOWR(0x1D, struct kfd_ioctl_import_dmabuf_args) -#define AMDKFD_IOC_ALLOC_QUEUE_GWS \ - AMDKFD_IOWR(0x1E, struct kfd_ioctl_alloc_queue_gws_args) - #define AMDKFD_COMMAND_START 0x01 -#define AMDKFD_COMMAND_END 0x1F +#define AMDKFD_COMMAND_END 0x1E #endif -- cgit From 67e7b52d44e3d539dfbfcd866c3d3d69da23a909 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 7 Aug 2019 07:31:27 -0400 Subject: NFSv4: Ensure state recovery handles ETIMEDOUT correctly Ensure that the state recovery code handles ETIMEDOUT correctly, and also that we set RPC_TASK_TIMEOUT when recovering open state. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 2 ++ fs/nfs/nfs4state.c | 7 +++++-- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 12b2b65ad8a8..1406858bae6c 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2179,6 +2179,7 @@ static int nfs4_handle_delegation_recall_error(struct nfs_server *server, struct case -ENOENT: case -EAGAIN: case -ESTALE: + case -ETIMEDOUT: break; case -NFS4ERR_BADSESSION: case -NFS4ERR_BADSLOT: @@ -2499,6 +2500,7 @@ static int nfs4_run_open_task(struct nfs4_opendata *data, if (!ctx) { nfs4_init_sequence(&o_arg->seq_args, &o_res->seq_res, 1, 1); data->is_recover = true; + task_setup_data.flags |= RPC_TASK_TIMEOUT; } else { nfs4_init_sequence(&o_arg->seq_args, &o_res->seq_res, 1, 0); pnfs_lgopen_prepare(data, ctx); diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index a4e866b2b43b..cad4e064b328 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1529,6 +1529,7 @@ restart: switch (status) { case 0: break; + case -ETIMEDOUT: case -ESTALE: case -NFS4ERR_ADMIN_REVOKED: case -NFS4ERR_STALE_STATEID: @@ -1682,11 +1683,13 @@ restart: case -NFS4ERR_EXPIRED: case -NFS4ERR_NO_GRACE: nfs4_state_mark_reclaim_nograce(sp->so_server->nfs_client, state); + /* Fall through */ case -NFS4ERR_STALE_CLIENTID: case -NFS4ERR_BADSESSION: case -NFS4ERR_BADSLOT: case -NFS4ERR_BAD_HIGH_SLOT: case -NFS4ERR_CONN_NOT_BOUND_TO_SESSION: + case -ETIMEDOUT: goto out_err; } nfs4_put_open_state(state); @@ -1971,7 +1974,6 @@ static int nfs4_handle_reclaim_lease_error(struct nfs_client *clp, int status) return -EPERM; case -EACCES: case -NFS4ERR_DELAY: - case -ETIMEDOUT: case -EAGAIN: ssleep(1); break; @@ -2600,7 +2602,7 @@ static void nfs4_state_manager(struct nfs_client *clp) } /* Now recover expired state... */ - if (test_and_clear_bit(NFS4CLNT_RECLAIM_NOGRACE, &clp->cl_state)) { + if (test_bit(NFS4CLNT_RECLAIM_NOGRACE, &clp->cl_state)) { section = "reclaim nograce"; status = nfs4_do_reclaim(clp, clp->cl_mvops->nograce_recovery_ops); @@ -2608,6 +2610,7 @@ static void nfs4_state_manager(struct nfs_client *clp) continue; if (status < 0) goto out_error; + clear_bit(NFS4CLNT_RECLAIM_NOGRACE, &clp->cl_state); } nfs4_end_drain_session(clp); -- cgit From e15c2ffa1091c4f72370f01af4de8f9dddeb17a6 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 6 Aug 2019 13:34:31 -0600 Subject: block: fix O_DIRECT error handling for bio fragments 0eb6ddfb865c tried to fix this up, but introduced a use-after-free of dio. Additionally, we still had an issue with error handling, as reported by Darrick: "I noticed a regression in xfs/747 (an unreleased xfstest for the xfs_scrub media scanning feature) on 5.3-rc3. I'll condense that down to a simpler reproducer: error-test: 0 209 linear 8:48 0 error-test: 209 1 error error-test: 210 6446894 linear 8:48 210 Basically we have a ~3G /dev/sdd and we set up device mapper to fail IO for sector 209 and to pass the io to the scsi device everywhere else. On 5.3-rc3, performing a directio pread of this range with a < 1M buffer (in other words, a request for fewer than MAX_BIO_PAGES bytes) yields EIO like you'd expect: pread64(3, 0x7f880e1c7000, 1048576, 0) = -1 EIO (Input/output error) pread: Input/output error +++ exited with 0 +++ But doing it with a larger buffer succeeds(!): pread64(3, "XFSB\0\0\20\0\0\0\0\0\0\fL\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1146880, 0) = 1146880 read 1146880/1146880 bytes at offset 0 1 MiB, 1 ops; 0.0009 sec (1.124 GiB/sec and 1052.6316 ops/sec) +++ exited with 0 +++ (Note that the part of the buffer corresponding to the dm-error area is uninitialized) On 5.3-rc2, both commands would fail with EIO like you'd expect. The only change between rc2 and rc3 is commit 0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments"). AFAICT we end up in __blkdev_direct_IO with a 1120K buffer, which gets split into two bios: one for the first BIO_MAX_PAGES worth of data (1MB) and a second one for the 96k after that." Fix this by noting that it's always safe to dereference dio if we get BLK_QC_T_EAGAIN returned, as end_io hasn't been run for that case. So we can safely increment the dio size before calling submit_bio(), and then decrement it on failure (not that it really matters, as the bio and dio are going away). For error handling, return to the original method of just using 'ret' for tracking the error, and the size tracking in dio->size. Fixes: 0eb6ddfb865c ("block: Fix __blkdev_direct_IO() for bio fragments") Fixes: 6a43074e2f46 ("block: properly handle IOCB_NOWAIT for async O_DIRECT IO") Reported-by: Darrick J. Wong Signed-off-by: Jens Axboe --- fs/block_dev.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/fs/block_dev.c b/fs/block_dev.c index a6f7c892cb4a..131e2e0582a6 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -349,7 +349,7 @@ __blkdev_direct_IO(struct kiocb *iocb, struct iov_iter *iter, int nr_pages) loff_t pos = iocb->ki_pos; blk_qc_t qc = BLK_QC_T_NONE; gfp_t gfp; - ssize_t ret; + int ret; if ((pos | iov_iter_alignment(iter)) & (bdev_logical_block_size(bdev) - 1)) @@ -386,8 +386,6 @@ __blkdev_direct_IO(struct kiocb *iocb, struct iov_iter *iter, int nr_pages) ret = 0; for (;;) { - int err; - bio_set_dev(bio, bdev); bio->bi_iter.bi_sector = pos >> 9; bio->bi_write_hint = iocb->ki_hint; @@ -395,10 +393,8 @@ __blkdev_direct_IO(struct kiocb *iocb, struct iov_iter *iter, int nr_pages) bio->bi_end_io = blkdev_bio_end_io; bio->bi_ioprio = iocb->ki_ioprio; - err = bio_iov_iter_get_pages(bio, iter); - if (unlikely(err)) { - if (!ret) - ret = err; + ret = bio_iov_iter_get_pages(bio, iter); + if (unlikely(ret)) { bio->bi_status = BLK_STS_IOERR; bio_endio(bio); break; @@ -421,7 +417,6 @@ __blkdev_direct_IO(struct kiocb *iocb, struct iov_iter *iter, int nr_pages) if (nowait) bio->bi_opf |= (REQ_NOWAIT | REQ_NOWAIT_INLINE); - dio->size += bio->bi_iter.bi_size; pos += bio->bi_iter.bi_size; nr_pages = iov_iter_npages(iter, BIO_MAX_PAGES); @@ -433,13 +428,13 @@ __blkdev_direct_IO(struct kiocb *iocb, struct iov_iter *iter, int nr_pages) polled = true; } + dio->size += bio->bi_iter.bi_size; qc = submit_bio(bio); if (qc == BLK_QC_T_EAGAIN) { - if (!ret) - ret = -EAGAIN; + dio->size -= bio->bi_iter.bi_size; + ret = -EAGAIN; goto error; } - ret = dio->size; if (polled) WRITE_ONCE(iocb->ki_cookie, qc); @@ -460,18 +455,17 @@ __blkdev_direct_IO(struct kiocb *iocb, struct iov_iter *iter, int nr_pages) atomic_inc(&dio->ref); } + dio->size += bio->bi_iter.bi_size; qc = submit_bio(bio); if (qc == BLK_QC_T_EAGAIN) { - if (!ret) - ret = -EAGAIN; + dio->size -= bio->bi_iter.bi_size; + ret = -EAGAIN; goto error; } - ret = dio->size; bio = bio_alloc(gfp, nr_pages); if (!bio) { - if (!ret) - ret = -EAGAIN; + ret = -EAGAIN; goto error; } } @@ -496,6 +490,8 @@ __blkdev_direct_IO(struct kiocb *iocb, struct iov_iter *iter, int nr_pages) out: if (!ret) ret = blk_status_to_errno(dio->bio.bi_status); + if (likely(!ret)) + ret = dio->size; bio_put(&dio->bio); return ret; -- cgit From 2d7271501720038381d45fb3dcbe4831228fc8cc Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 7 Aug 2019 12:20:52 -0600 Subject: libata: have ata_scsi_rw_xlat() fail invalid passthrough requests For passthrough requests, libata-scsi takes what the user passes in as gospel. This can be problematic if the user fills in the CDB incorrectly. One example of that is in request sizes. For read/write commands, the CDB contains fields describing the transfer length of the request. These should match with the SG_IO header fields, but libata-scsi currently does no validation of that. Check that the number of blocks in the CDB for passthrough requests matches what was mapped into the request. If the CDB asks for more data then the validated SG_IO header fields, error it. Reported-by: Krishna Ram Prakash R Reviewed-by: Kees Cook Signed-off-by: Jens Axboe --- drivers/ata/libata-scsi.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 391ac0503dc0..76d0f9de767b 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1786,6 +1786,21 @@ nothing_to_do: return 1; } +static bool ata_check_nblocks(struct scsi_cmnd *scmd, u32 n_blocks) +{ + struct request *rq = scmd->request; + u32 req_blocks; + + if (!blk_rq_is_passthrough(rq)) + return true; + + req_blocks = blk_rq_bytes(rq) / scmd->device->sector_size; + if (n_blocks > req_blocks) + return false; + + return true; +} + /** * ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one * @qc: Storage for translated ATA taskfile @@ -1830,6 +1845,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) scsi_10_lba_len(cdb, &block, &n_block); if (cdb[1] & (1 << 3)) tf_flags |= ATA_TFLAG_FUA; + if (!ata_check_nblocks(scmd, n_block)) + goto invalid_fld; break; case READ_6: case WRITE_6: @@ -1844,6 +1861,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) */ if (!n_block) n_block = 256; + if (!ata_check_nblocks(scmd, n_block)) + goto invalid_fld; break; case READ_16: case WRITE_16: @@ -1854,6 +1873,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc) scsi_16_lba_len(cdb, &block, &n_block); if (cdb[1] & (1 << 3)) tf_flags |= ATA_TFLAG_FUA; + if (!ata_check_nblocks(scmd, n_block)) + goto invalid_fld; break; default: DPRINTK("no-byte command\n"); -- cgit From 752ead44491e8c91e14d7079625c5916b30921c5 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 7 Aug 2019 12:23:57 -0600 Subject: libata: add SG safety checks in SFF pio transfers Abort processing of a command if we run out of mapped data in the SG list. This should never happen, but a previous bug caused it to be possible. Play it safe and attempt to abort nicely if we don't have more SG segments left. Reviewed-by: Kees Cook Signed-off-by: Jens Axboe --- drivers/ata/libata-sff.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 10aa27882142..4f115adb4ee8 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -658,6 +658,10 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) unsigned int offset; unsigned char *buf; + if (!qc->cursg) { + qc->curbytes = qc->nbytes; + return; + } if (qc->curbytes == qc->nbytes - qc->sect_size) ap->hsm_task_state = HSM_ST_LAST; @@ -683,6 +687,8 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) if (qc->cursg_ofs == qc->cursg->length) { qc->cursg = sg_next(qc->cursg); + if (!qc->cursg) + ap->hsm_task_state = HSM_ST_LAST; qc->cursg_ofs = 0; } } -- cgit From 38ada2f406a9b81fb1249c5c9227fa657e7d5671 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 26 Jul 2019 08:00:49 -0700 Subject: hwmon: (nct7802) Fix wrong detection of in4 presence The code to detect if in4 is present is wrong; if in4 is not present, the in4_input sysfs attribute is still present. In detail: - Ihen RTD3_MD=11 (VSEN3 present), everything is as expected (no bug). - If we have RTD3_MD!=11 (no VSEN3), we unexpectedly have a in4_input file under /sys and the "sensors" command displays in4_input. But as expected, we have no in4_min, in4_max, in4_alarm, in4_beep. Fix is_visible function to detect and report in4_input visibility as expected. Reported-by: Gilles Buloz Cc: Gilles Buloz Cc: stable@vger.kernel.org Fixes: 3434f37835804 ("hwmon: Driver for Nuvoton NCT7802Y") Signed-off-by: Guenter Roeck --- drivers/hwmon/nct7802.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/nct7802.c b/drivers/hwmon/nct7802.c index ec7bcf8d7cd6..f3dd2a17bd42 100644 --- a/drivers/hwmon/nct7802.c +++ b/drivers/hwmon/nct7802.c @@ -704,7 +704,7 @@ static struct attribute *nct7802_in_attrs[] = { &sensor_dev_attr_in3_alarm.dev_attr.attr, &sensor_dev_attr_in3_beep.dev_attr.attr, - &sensor_dev_attr_in4_input.dev_attr.attr, /* 17 */ + &sensor_dev_attr_in4_input.dev_attr.attr, /* 16 */ &sensor_dev_attr_in4_min.dev_attr.attr, &sensor_dev_attr_in4_max.dev_attr.attr, &sensor_dev_attr_in4_alarm.dev_attr.attr, @@ -730,9 +730,9 @@ static umode_t nct7802_in_is_visible(struct kobject *kobj, if (index >= 6 && index < 11 && (reg & 0x03) != 0x03) /* VSEN1 */ return 0; - if (index >= 11 && index < 17 && (reg & 0x0c) != 0x0c) /* VSEN2 */ + if (index >= 11 && index < 16 && (reg & 0x0c) != 0x0c) /* VSEN2 */ return 0; - if (index >= 17 && (reg & 0x30) != 0x30) /* VSEN3 */ + if (index >= 16 && (reg & 0x30) != 0x30) /* VSEN3 */ return 0; return attr->mode; -- cgit From a95a4f3f2702b55a89393bf0f1b2b3d79e0f7da2 Mon Sep 17 00:00:00 2001 From: Iker Perez del Palomar Sustatxa Date: Thu, 1 Aug 2019 08:53:24 +0100 Subject: hwmon: (lm75) Fixup tmp75b clr_mask The configuration register of the tmp75b sensor is 16bit long, however the first byte is reserved, so there is not no need to take care of it. Because the order of the bytes is little endian and it is only necessary to write one byte, the desired bits must be shifted into a 8 bit range. Fixes: 39abe9d88b30 ("hwmon: (lm75) Add support for TMP75B") Cc: stable@vger.kernel.org Signed-off-by: Iker Perez del Palomar Sustatxa Link: https://lore.kernel.org/r/20190801075324.4638-1-iker.perez@codethink.co.uk Signed-off-by: Guenter Roeck --- drivers/hwmon/lm75.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index 3fb9c0a2d6d0..ce5ec403ec73 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -343,7 +343,7 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) data->sample_time = MSEC_PER_SEC / 2; break; case tmp75b: /* not one-shot mode, Conversion rate 37Hz */ - clr_mask |= 1 << 15 | 0x3 << 13; + clr_mask |= 1 << 7 | 0x3 << 5; data->resolution = 12; data->sample_time = MSEC_PER_SEC / 37; break; -- cgit From c7cd7c748a3250ca33509f9235efab9c803aca09 Mon Sep 17 00:00:00 2001 From: Wenwen Wang Date: Thu, 8 Aug 2019 00:15:21 -0500 Subject: sound: fix a memory leak bug In sound_insert_unit(), the controlling structure 's' is allocated through kmalloc(). Then it is added to the sound driver list by invoking __sound_insert_unit(). Later on, if __register_chrdev() fails, 's' is removed from the list through __sound_remove_unit(). If 'index' is not less than 0, -EBUSY is returned to indicate the error. However, 's' is not deallocated on this execution path, leading to a memory leak bug. To fix the above issue, free 's' before -EBUSY is returned. Signed-off-by: Wenwen Wang Cc: Signed-off-by: Takashi Iwai --- sound/sound_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/sound_core.c b/sound/sound_core.c index b730d97c4de6..90d118cd9164 100644 --- a/sound/sound_core.c +++ b/sound/sound_core.c @@ -275,7 +275,8 @@ retry: goto retry; } spin_unlock(&sound_loader_lock); - return -EBUSY; + r = -EBUSY; + goto fail; } } -- cgit From 4ce97317f41d38584fb93578e922fcd19e535f5b Mon Sep 17 00:00:00 2001 From: Nick Desaulniers Date: Wed, 7 Aug 2019 15:15:32 -0700 Subject: x86/purgatory: Do not use __builtin_memcpy and __builtin_memset Implementing memcpy and memset in terms of __builtin_memcpy and __builtin_memset is problematic. GCC at -O2 will replace calls to the builtins with calls to memcpy and memset (but will generate an inline implementation at -Os). Clang will replace the builtins with these calls regardless of optimization level. $ llvm-objdump -dr arch/x86/purgatory/string.o | tail 0000000000000339 memcpy: 339: 48 b8 00 00 00 00 00 00 00 00 movabsq $0, %rax 000000000000033b: R_X86_64_64 memcpy 343: ff e0 jmpq *%rax 0000000000000345 memset: 345: 48 b8 00 00 00 00 00 00 00 00 movabsq $0, %rax 0000000000000347: R_X86_64_64 memset 34f: ff e0 Such code results in infinite recursion at runtime. This is observed when doing kexec. Instead, reuse an implementation from arch/x86/boot/compressed/string.c. This requires to implement a stub function for warn(). Also, Clang may lower memcmp's that compare against 0 to bcmp's, so add a small definition, too. See also: commit 5f074f3e192f ("lib/string.c: implement a basic bcmp") Fixes: 8fc5b4d4121c ("purgatory: core purgatory functionality") Reported-by: Vaibhav Rustagi Debugged-by: Vaibhav Rustagi Debugged-by: Manoj Gupta Suggested-by: Alistair Delva Signed-off-by: Nick Desaulniers Signed-off-by: Thomas Gleixner Tested-by: Vaibhav Rustagi Cc: stable@vger.kernel.org Link: https://bugs.chromium.org/p/chromium/issues/detail?id=984056 Link: https://lkml.kernel.org/r/20190807221539.94583-1-ndesaulniers@google.com --- arch/x86/boot/string.c | 8 ++++++++ arch/x86/purgatory/Makefile | 3 +++ arch/x86/purgatory/purgatory.c | 6 ++++++ arch/x86/purgatory/string.c | 23 ----------------------- 4 files changed, 17 insertions(+), 23 deletions(-) delete mode 100644 arch/x86/purgatory/string.c diff --git a/arch/x86/boot/string.c b/arch/x86/boot/string.c index 401e30ca0a75..8272a4492844 100644 --- a/arch/x86/boot/string.c +++ b/arch/x86/boot/string.c @@ -37,6 +37,14 @@ int memcmp(const void *s1, const void *s2, size_t len) return diff; } +/* + * Clang may lower `memcmp == 0` to `bcmp == 0`. + */ +int bcmp(const void *s1, const void *s2, size_t len) +{ + return memcmp(s1, s2, len); +} + int strcmp(const char *str1, const char *str2) { const unsigned char *s1 = (const unsigned char *)str1; diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile index 3cf302b26332..91ef244026d2 100644 --- a/arch/x86/purgatory/Makefile +++ b/arch/x86/purgatory/Makefile @@ -6,6 +6,9 @@ purgatory-y := purgatory.o stack.o setup-x86_$(BITS).o sha256.o entry64.o string targets += $(purgatory-y) PURGATORY_OBJS = $(addprefix $(obj)/,$(purgatory-y)) +$(obj)/string.o: $(srctree)/arch/x86/boot/compressed/string.c FORCE + $(call if_changed_rule,cc_o_c) + $(obj)/sha256.o: $(srctree)/lib/sha256.c FORCE $(call if_changed_rule,cc_o_c) diff --git a/arch/x86/purgatory/purgatory.c b/arch/x86/purgatory/purgatory.c index 6d8d5a34c377..b607bda786f6 100644 --- a/arch/x86/purgatory/purgatory.c +++ b/arch/x86/purgatory/purgatory.c @@ -68,3 +68,9 @@ void purgatory(void) } copy_backup_region(); } + +/* + * Defined in order to reuse memcpy() and memset() from + * arch/x86/boot/compressed/string.c + */ +void warn(const char *msg) {} diff --git a/arch/x86/purgatory/string.c b/arch/x86/purgatory/string.c deleted file mode 100644 index 01ad43873ad9..000000000000 --- a/arch/x86/purgatory/string.c +++ /dev/null @@ -1,23 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Simple string functions. - * - * Copyright (C) 2014 Red Hat Inc. - * - * Author: - * Vivek Goyal - */ - -#include - -#include "../boot/string.c" - -void *memcpy(void *dst, const void *src, size_t len) -{ - return __builtin_memcpy(dst, src, len); -} - -void *memset(void *dst, int c, size_t len) -{ - return __builtin_memset(dst, c, len); -} -- cgit From b059f801a937d164e03b33c1848bb3dca67c0b04 Mon Sep 17 00:00:00 2001 From: Nick Desaulniers Date: Wed, 7 Aug 2019 15:15:33 -0700 Subject: x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS KBUILD_CFLAGS is very carefully built up in the top level Makefile, particularly when cross compiling or using different build tools. Resetting KBUILD_CFLAGS via := assignment is an antipattern. The comment above the reset mentions that -pg is problematic. Other Makefiles use `CFLAGS_REMOVE_file.o = $(CC_FLAGS_FTRACE)` when CONFIG_FUNCTION_TRACER is set. Prefer that pattern to wiping out all of the important KBUILD_CFLAGS then manually having to re-add them. Seems also that __stack_chk_fail references are generated when using CONFIG_STACKPROTECTOR or CONFIG_STACKPROTECTOR_STRONG. Fixes: 8fc5b4d4121c ("purgatory: core purgatory functionality") Reported-by: Vaibhav Rustagi Suggested-by: Peter Zijlstra Suggested-by: Thomas Gleixner Signed-off-by: Nick Desaulniers Signed-off-by: Thomas Gleixner Tested-by: Vaibhav Rustagi Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190807221539.94583-2-ndesaulniers@google.com --- arch/x86/purgatory/Makefile | 33 ++++++++++++++++++++++++++++----- 1 file changed, 28 insertions(+), 5 deletions(-) diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile index 91ef244026d2..8901a1f89cf5 100644 --- a/arch/x86/purgatory/Makefile +++ b/arch/x86/purgatory/Makefile @@ -20,11 +20,34 @@ KCOV_INSTRUMENT := n # Default KBUILD_CFLAGS can have -pg option set when FTRACE is enabled. That # in turn leaves some undefined symbols like __fentry__ in purgatory and not -# sure how to relocate those. Like kexec-tools, use custom flags. - -KBUILD_CFLAGS := -fno-strict-aliasing -Wall -Wstrict-prototypes -fno-zero-initialized-in-bss -fno-builtin -ffreestanding -c -Os -mcmodel=large -KBUILD_CFLAGS += -m$(BITS) -KBUILD_CFLAGS += $(call cc-option,-fno-PIE) +# sure how to relocate those. +ifdef CONFIG_FUNCTION_TRACER +CFLAGS_REMOVE_sha256.o += $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_purgatory.o += $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_string.o += $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_kexec-purgatory.o += $(CC_FLAGS_FTRACE) +endif + +ifdef CONFIG_STACKPROTECTOR +CFLAGS_REMOVE_sha256.o += -fstack-protector +CFLAGS_REMOVE_purgatory.o += -fstack-protector +CFLAGS_REMOVE_string.o += -fstack-protector +CFLAGS_REMOVE_kexec-purgatory.o += -fstack-protector +endif + +ifdef CONFIG_STACKPROTECTOR_STRONG +CFLAGS_REMOVE_sha256.o += -fstack-protector-strong +CFLAGS_REMOVE_purgatory.o += -fstack-protector-strong +CFLAGS_REMOVE_string.o += -fstack-protector-strong +CFLAGS_REMOVE_kexec-purgatory.o += -fstack-protector-strong +endif + +ifdef CONFIG_RETPOLINE +CFLAGS_REMOVE_sha256.o += $(RETPOLINE_CFLAGS) +CFLAGS_REMOVE_purgatory.o += $(RETPOLINE_CFLAGS) +CFLAGS_REMOVE_string.o += $(RETPOLINE_CFLAGS) +CFLAGS_REMOVE_kexec-purgatory.o += $(RETPOLINE_CFLAGS) +endif $(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE $(call if_changed,ld) -- cgit From 04f5bda84b0712d6f172556a7e8dca9ded5e73b9 Mon Sep 17 00:00:00 2001 From: Valdis Klētnieks Date: Wed, 7 Aug 2019 23:27:17 -0400 Subject: x86/lib/cpu: Address missing prototypes warning When building with W=1, warnings about missing prototypes are emitted: CC arch/x86/lib/cpu.o arch/x86/lib/cpu.c:5:14: warning: no previous prototype for 'x86_family' [-Wmissing-prototypes] 5 | unsigned int x86_family(unsigned int sig) | ^~~~~~~~~~ arch/x86/lib/cpu.c:18:14: warning: no previous prototype for 'x86_model' [-Wmissing-prototypes] 18 | unsigned int x86_model(unsigned int sig) | ^~~~~~~~~ arch/x86/lib/cpu.c:33:14: warning: no previous prototype for 'x86_stepping' [-Wmissing-prototypes] 33 | unsigned int x86_stepping(unsigned int sig) | ^~~~~~~~~~~~ Add the proper include file so the prototypes are there. Signed-off-by: Valdis Kletnieks Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/42513.1565234837@turing-police --- arch/x86/lib/cpu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/lib/cpu.c b/arch/x86/lib/cpu.c index 04967cdce5d1..7ad68917a51e 100644 --- a/arch/x86/lib/cpu.c +++ b/arch/x86/lib/cpu.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only #include #include +#include unsigned int x86_family(unsigned int sig) { -- cgit From 8097c43bcbec56fbd0788d99e1e236c0e0d4013f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 8 Aug 2019 08:39:35 +0200 Subject: Revert "kernfs: fix memleak in kernel_ops_readdir()" This reverts commit cc798c83898ea0a77fcaa1a92afda35c3c3ded74. Tony writes: Somehow this causes a regression in Linux next for me where I'm seeing lots of sysfs entries now missing under /sys/bus/platform/devices. For example, I now only see one .serial entry show up in sysfs. Things work again if I revert commit cc798c83898e ("kernfs: fix memleak inkernel_ops_readdir()"). Any ideas why that would be? Tejun says: Ugh, you're right. It can get double-put cuz ctx->pos is put by release too. So reverting it for now. Reported-by: Tony Lindgren Cc: Andrea Arcangeli Cc: Tejun Heo Fixes: cc798c83898e ("kernfs: fix memleak in kernel_ops_readdir()") Cc: stable Signed-off-by: Greg Kroah-Hartman --- fs/kernfs/dir.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/fs/kernfs/dir.c b/fs/kernfs/dir.c index 1e98efc2bf6d..a387534c9577 100644 --- a/fs/kernfs/dir.c +++ b/fs/kernfs/dir.c @@ -1684,14 +1684,11 @@ static int kernfs_fop_readdir(struct file *file, struct dir_context *ctx) kernfs_get(pos); mutex_unlock(&kernfs_mutex); - if (unlikely(!dir_emit(ctx, name, len, ino, type))) { - kernfs_put(pos); - goto out; - } + if (!dir_emit(ctx, name, len, ino, type)) + return 0; mutex_lock(&kernfs_mutex); } mutex_unlock(&kernfs_mutex); -out: file->private_data = NULL; ctx->pos = INT_MAX; return 0; -- cgit From 491beed3b102b6e6c0e7734200661242226e3933 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Mon, 5 Aug 2019 09:19:06 +0800 Subject: genirq/affinity: Create affinity mask for single vector Since commit c66d4bd110a1f8 ("genirq/affinity: Add new callback for (re)calculating interrupt sets"), irq_create_affinity_masks() returns NULL in case of single vector. This change has caused regression on some drivers, such as lpfc. The problem is that single vector requests can happen in some generic cases: 1) kdump kernel 2) irq vectors resource is close to exhaustion. If in that situation the affinity mask for a single vector is not created, every caller has to handle the special case. There is no reason why the mask cannot be created, so remove the check for a single vector and create the mask. Fixes: c66d4bd110a1f8 ("genirq/affinity: Add new callback for (re)calculating interrupt sets") Signed-off-by: Ming Lei Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190805011906.5020-1-ming.lei@redhat.com --- kernel/irq/affinity.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/kernel/irq/affinity.c b/kernel/irq/affinity.c index 4352b08ae48d..6fef48033f96 100644 --- a/kernel/irq/affinity.c +++ b/kernel/irq/affinity.c @@ -251,11 +251,9 @@ irq_create_affinity_masks(unsigned int nvecs, struct irq_affinity *affd) * Determine the number of vectors which need interrupt affinities * assigned. If the pre/post request exhausts the available vectors * then nothing to do here except for invoking the calc_sets() - * callback so the device driver can adjust to the situation. If there - * is only a single vector, then managing the queue is pointless as - * well. + * callback so the device driver can adjust to the situation. */ - if (nvecs > 1 && nvecs > affd->pre_vectors + affd->post_vectors) + if (nvecs > affd->pre_vectors + affd->post_vectors) affvecs = nvecs - affd->pre_vectors - affd->post_vectors; else affvecs = 0; -- cgit From 1be3c1fae6c1e1f5bb982b255d2034034454527a Mon Sep 17 00:00:00 2001 From: Wenwen Wang Date: Thu, 8 Aug 2019 00:50:58 -0500 Subject: ALSA: firewire: fix a memory leak bug In iso_packets_buffer_init(), 'b->packets' is allocated through kmalloc_array(). Then, the aligned packet size is checked. If it is larger than PAGE_SIZE, -EINVAL will be returned to indicate the error. However, the allocated 'b->packets' is not deallocated on this path, leading to a memory leak. To fix the above issue, free 'b->packets' before returning the error code. Fixes: 31ef9134eb52 ("ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver") Signed-off-by: Wenwen Wang Reviewed-by: Takashi Sakamoto Cc: # v2.6.39+ Signed-off-by: Takashi Iwai --- sound/firewire/packets-buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/firewire/packets-buffer.c b/sound/firewire/packets-buffer.c index 0d35359d25cd..0ecafd0c6722 100644 --- a/sound/firewire/packets-buffer.c +++ b/sound/firewire/packets-buffer.c @@ -37,7 +37,7 @@ int iso_packets_buffer_init(struct iso_packets_buffer *b, struct fw_unit *unit, packets_per_page = PAGE_SIZE / packet_size; if (WARN_ON(!packets_per_page)) { err = -EINVAL; - goto error; + goto err_packets; } pages = DIV_ROUND_UP(count, packets_per_page); -- cgit From 6b7c3b86f0b63134b2ab56508921a0853ffa687a Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 24 Jun 2019 09:39:59 -0700 Subject: drm/vmwgfx: fix memory leak when too many retries have occurred Currently when too many retries have occurred there is a memory leak on the allocation for reply on the error return path. Fix this by kfree'ing reply before returning. Addresses-Coverity: ("Resource leak") Fixes: a9cd9c044aa9 ("drm/vmwgfx: Add a check to handle host message failure") Signed-off-by: Colin Ian King Reviewed-by: Deepak Rawat Signed-off-by: Deepak Rawat Signed-off-by: Thomas Hellstrom --- drivers/gpu/drm/vmwgfx/vmwgfx_msg.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c index e4e09d47c5c0..59e9d05ab928 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c @@ -389,8 +389,10 @@ static int vmw_recv_msg(struct rpc_channel *channel, void **msg, break; } - if (retries == RETRIES) + if (retries == RETRIES) { + kfree(reply); return -EINVAL; + } *msg_len = reply_len; *msg = reply; -- cgit From 2ca359f4f8b954b3a9d15a89f22a8b7283e7669f Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 8 Aug 2019 11:28:54 +0200 Subject: Revert "USB: rio500: simplify locking" This reverts commit d710734b06770814de2bfa2819420fb5df7f3a81. This simplification causes a deadlock. Reported-by: syzbot+7bbcbe9c9ff0cd49592a@syzkaller.appspotmail.com Fixes: d710734b0677 ("USB: rio500: simplify locking") Cc: stable Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20190808092854.23519-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/rio500.c | 43 +++++++++++++++++++++++++++---------------- 1 file changed, 27 insertions(+), 16 deletions(-) diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 27e9c78a791e..a32d61a79ab8 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -51,6 +51,7 @@ struct rio_usb_data { char *obuf, *ibuf; /* transfer buffers */ char bulk_in_ep, bulk_out_ep; /* Endpoint assignments */ wait_queue_head_t wait_q; /* for timeouts */ + struct mutex lock; /* general race avoidance */ }; static DEFINE_MUTEX(rio500_mutex); @@ -62,8 +63,10 @@ static int open_rio(struct inode *inode, struct file *file) /* against disconnect() */ mutex_lock(&rio500_mutex); + mutex_lock(&(rio->lock)); if (rio->isopen || !rio->present) { + mutex_unlock(&(rio->lock)); mutex_unlock(&rio500_mutex); return -EBUSY; } @@ -71,6 +74,7 @@ static int open_rio(struct inode *inode, struct file *file) init_waitqueue_head(&rio->wait_q); + mutex_unlock(&(rio->lock)); dev_info(&rio->rio_dev->dev, "Rio opened.\n"); mutex_unlock(&rio500_mutex); @@ -84,6 +88,7 @@ static int close_rio(struct inode *inode, struct file *file) /* against disconnect() */ mutex_lock(&rio500_mutex); + mutex_lock(&(rio->lock)); rio->isopen = 0; if (!rio->present) { @@ -95,6 +100,7 @@ static int close_rio(struct inode *inode, struct file *file) } else { dev_info(&rio->rio_dev->dev, "Rio closed.\n"); } + mutex_unlock(&(rio->lock)); mutex_unlock(&rio500_mutex); return 0; } @@ -109,7 +115,7 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) int retries; int retval=0; - mutex_lock(&rio500_mutex); + mutex_lock(&(rio->lock)); /* Sanity check to make sure rio is connected, powered, etc */ if (rio->present == 0 || rio->rio_dev == NULL) { retval = -ENODEV; @@ -253,7 +259,7 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg) err_out: - mutex_unlock(&rio500_mutex); + mutex_unlock(&(rio->lock)); return retval; } @@ -273,12 +279,12 @@ write_rio(struct file *file, const char __user *buffer, int errn = 0; int intr; - intr = mutex_lock_interruptible(&rio500_mutex); + intr = mutex_lock_interruptible(&(rio->lock)); if (intr) return -EINTR; /* Sanity check to make sure rio is connected, powered, etc */ if (rio->present == 0 || rio->rio_dev == NULL) { - mutex_unlock(&rio500_mutex); + mutex_unlock(&(rio->lock)); return -ENODEV; } @@ -301,7 +307,7 @@ write_rio(struct file *file, const char __user *buffer, goto error; } if (signal_pending(current)) { - mutex_unlock(&rio500_mutex); + mutex_unlock(&(rio->lock)); return bytes_written ? bytes_written : -EINTR; } @@ -339,12 +345,12 @@ write_rio(struct file *file, const char __user *buffer, buffer += copy_size; } while (count > 0); - mutex_unlock(&rio500_mutex); + mutex_unlock(&(rio->lock)); return bytes_written ? bytes_written : -EIO; error: - mutex_unlock(&rio500_mutex); + mutex_unlock(&(rio->lock)); return errn; } @@ -361,12 +367,12 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) char *ibuf; int intr; - intr = mutex_lock_interruptible(&rio500_mutex); + intr = mutex_lock_interruptible(&(rio->lock)); if (intr) return -EINTR; /* Sanity check to make sure rio is connected, powered, etc */ if (rio->present == 0 || rio->rio_dev == NULL) { - mutex_unlock(&rio500_mutex); + mutex_unlock(&(rio->lock)); return -ENODEV; } @@ -377,11 +383,11 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) while (count > 0) { if (signal_pending(current)) { - mutex_unlock(&rio500_mutex); + mutex_unlock(&(rio->lock)); return read_count ? read_count : -EINTR; } if (!rio->rio_dev) { - mutex_unlock(&rio500_mutex); + mutex_unlock(&(rio->lock)); return -ENODEV; } this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count; @@ -399,7 +405,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) count = this_read = partial; } else if (result == -ETIMEDOUT || result == 15) { /* FIXME: 15 ??? */ if (!maxretry--) { - mutex_unlock(&rio500_mutex); + mutex_unlock(&(rio->lock)); dev_err(&rio->rio_dev->dev, "read_rio: maxretry timeout\n"); return -ETIME; @@ -409,19 +415,19 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) finish_wait(&rio->wait_q, &wait); continue; } else if (result != -EREMOTEIO) { - mutex_unlock(&rio500_mutex); + mutex_unlock(&(rio->lock)); dev_err(&rio->rio_dev->dev, "Read Whoops - result:%d partial:%u this_read:%u\n", result, partial, this_read); return -EIO; } else { - mutex_unlock(&rio500_mutex); + mutex_unlock(&(rio->lock)); return (0); } if (this_read) { if (copy_to_user(buffer, ibuf, this_read)) { - mutex_unlock(&rio500_mutex); + mutex_unlock(&(rio->lock)); return -EFAULT; } count -= this_read; @@ -429,7 +435,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) buffer += this_read; } } - mutex_unlock(&rio500_mutex); + mutex_unlock(&(rio->lock)); return read_count; } @@ -494,6 +500,8 @@ static int probe_rio(struct usb_interface *intf, } dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf); + mutex_init(&(rio->lock)); + usb_set_intfdata (intf, rio); rio->present = 1; bail_out: @@ -511,10 +519,12 @@ static void disconnect_rio(struct usb_interface *intf) if (rio) { usb_deregister_dev(intf, &usb_rio_class); + mutex_lock(&(rio->lock)); if (rio->isopen) { rio->isopen = 0; /* better let it finish - the release will do whats needed */ rio->rio_dev = NULL; + mutex_unlock(&(rio->lock)); mutex_unlock(&rio500_mutex); return; } @@ -524,6 +534,7 @@ static void disconnect_rio(struct usb_interface *intf) dev_info(&intf->dev, "USB Rio disconnected.\n"); rio->present = 0; + mutex_unlock(&(rio->lock)); } mutex_unlock(&rio500_mutex); } -- cgit From c468a8aa790e0dfe0a7f8a39db282d39c2c00b46 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 8 Aug 2019 11:27:28 +0200 Subject: usb: iowarrior: fix deadlock on disconnect We have to drop the mutex before we close() upon disconnect() as close() needs the lock. This is safe to do by dropping the mutex as intfdata is already set to NULL, so open() will fail. Fixes: 03f36e885fc26 ("USB: open disconnect race in iowarrior") Reported-by: syzbot+a64a382964bf6c71a9c0@syzkaller.appspotmail.com Cc: stable Signed-off-by: Oliver Neukum Link: https://lore.kernel.org/r/20190808092728.23417-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/iowarrior.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index ba05dd80a020..f5bed9f29e56 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -866,19 +866,20 @@ static void iowarrior_disconnect(struct usb_interface *interface) dev = usb_get_intfdata(interface); mutex_lock(&iowarrior_open_disc_lock); usb_set_intfdata(interface, NULL); + /* prevent device read, write and ioctl */ + dev->present = 0; minor = dev->minor; + mutex_unlock(&iowarrior_open_disc_lock); + /* give back our minor - this will call close() locks need to be dropped at this point*/ - /* give back our minor */ usb_deregister_dev(interface, &iowarrior_class); mutex_lock(&dev->mutex); /* prevent device read, write and ioctl */ - dev->present = 0; mutex_unlock(&dev->mutex); - mutex_unlock(&iowarrior_open_disc_lock); if (dev->opened) { /* There is a process that holds a filedescriptor to the device , -- cgit From 6cf9481b440da6d6d86bd8e4c99a8b553b9d1271 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 30 Jul 2019 17:48:48 +0200 Subject: pwm: Fallback to the static lookup-list when acpi_pwm_get fails Commit 4a6ef8e37c4d ("pwm: Add support referencing PWMs from ACPI") made pwm_get unconditionally return the acpi_pwm_get return value if the device passed to pwm_get has an ACPI fwnode. But even if the passed in device has an ACPI fwnode, it does not necessarily have the necessary ACPI package defining its pwm bindings, especially since the binding / API of this ACPI package has only been introduced very recently. Up until now X86/ACPI devices which use a separate pwm controller for controlling their LCD screen's backlight brightness have been relying on the static lookup-list to get their pwm. pwm_get unconditionally returning the acpi_pwm_get return value breaks this, breaking backlight control on these devices. This commit fixes this by making pwm_get fall back to the static lookup-list if acpi_pwm_get returns -ENOENT. BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=96571 Reported-by: youling257@gmail.com Fixes: 4a6ef8e37c4d ("pwm: Add support referencing PWMs from ACPI") Cc: Nikolaus Voss Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Acked-by: Nikolaus Voss Signed-off-by: Thierry Reding --- drivers/pwm/core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index c3ab07ab31a9..8edfac17364e 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -882,8 +882,11 @@ struct pwm_device *pwm_get(struct device *dev, const char *con_id) return of_pwm_get(dev, dev->of_node, con_id); /* then lookup via ACPI */ - if (dev && is_acpi_node(dev->fwnode)) - return acpi_pwm_get(dev->fwnode); + if (dev && is_acpi_node(dev->fwnode)) { + pwm = acpi_pwm_get(dev->fwnode); + if (!IS_ERR(pwm) || PTR_ERR(pwm) != -ENOENT) + return pwm; + } /* * We look up the provider in the static table typically provided by -- cgit From 7bac98707f65b93bf994ef4e99b1eb9e7dbb9c32 Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Mon, 21 Jan 2019 13:54:39 +0100 Subject: kbuild: add OBJSIZE variable for the size tool Define and export OBJSIZE variable for "size" tool from binutils to be used in architecture specific Makefiles (naming the variable just "SIZE" would be too risky). In particular this tool is useful to perform checks that early boot code is not using bss section (which might have not been zeroed yet or intersects with initrd or other files boot loader might have put right after the linux kernel). Link: http://lkml.kernel.org/r/patch-1.thread-2257a1.git-188f5a3d81d5.your-ad-here.call-01565088755-ext-5120@work.hours Acked-by: Masahiro Yamada Signed-off-by: Vasily Gorbik --- Makefile | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/Makefile b/Makefile index 23cdf1f41364..01683ba84d4c 100644 --- a/Makefile +++ b/Makefile @@ -419,6 +419,7 @@ NM = $(CROSS_COMPILE)nm STRIP = $(CROSS_COMPILE)strip OBJCOPY = $(CROSS_COMPILE)objcopy OBJDUMP = $(CROSS_COMPILE)objdump +OBJSIZE = $(CROSS_COMPILE)size PAHOLE = pahole LEX = flex YACC = bison @@ -475,9 +476,9 @@ GCC_PLUGINS_CFLAGS := CLANG_FLAGS := export ARCH SRCARCH CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC -export CPP AR NM STRIP OBJCOPY OBJDUMP PAHOLE KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS -export MAKE LEX YACC AWK INSTALLKERNEL PERL PYTHON PYTHON2 PYTHON3 UTS_MACHINE -export HOSTCXX KBUILD_HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS +export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE PAHOLE LEX YACC AWK INSTALLKERNEL +export PERL PYTHON PYTHON2 PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX +export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS KBUILD_LDFLAGS export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE -- cgit From 739bacbf7aa2c44bb25d9ad5f7d5b256082c5e66 Mon Sep 17 00:00:00 2001 From: Vasily Gorbik Date: Mon, 21 Jan 2019 13:54:53 +0100 Subject: s390/build: use size command to perform empty .bss check Currently empty .bss checks performed do not pay attention to "common objects" in object files which end up in .bss section eventually. The "size" tool is a part of binutils and since version 2.18 provides "--common" command line option, which allows to account "common objects" sizes in .bss section size. Utilize "size --common" to perform accurate check that .bss section is unused. Besides that the size tool handles object files without .bss section gracefully and doesn't require additional objdump run. The linux kernel requires binutils 2.20 since 4.13. Kbuild exports OBJSIZE to reference the right size tool. Link: http://lkml.kernel.org/r/patch-2.thread-2257a1.git-2257a1c53d4a.your-ad-here.call-01565088755-ext-5120@work.hours Reported-and-tested-by: Heiko Carstens Acked-by: Heiko Carstens Signed-off-by: Vasily Gorbik --- arch/s390/scripts/Makefile.chkbss | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/s390/scripts/Makefile.chkbss b/arch/s390/scripts/Makefile.chkbss index 884a9caff5fb..f4f4c2c6dee9 100644 --- a/arch/s390/scripts/Makefile.chkbss +++ b/arch/s390/scripts/Makefile.chkbss @@ -11,8 +11,7 @@ chkbss: $(addprefix $(obj)/, $(chkbss-files)) quiet_cmd_chkbss = CHKBSS $< cmd_chkbss = \ - if $(OBJDUMP) -h $< | grep -q "\.bss" && \ - ! $(OBJDUMP) -j .bss -w -h $< | awk 'END { if ($$3) exit 1 }'; then \ + if ! $(OBJSIZE) --common $< | $(AWK) 'END { if ($$3) exit 1 }'; then \ echo "error: $< .bss section is not empty" >&2; exit 1; \ fi; \ touch $@; -- cgit From 430380b4637aec646996b4aef67ad417593923b2 Mon Sep 17 00:00:00 2001 From: He Zhe Date: Thu, 8 Aug 2019 11:09:54 +0800 Subject: block: aoe: Fix kernel crash due to atomic sleep when exiting Since commit 3582dd291788 ("aoe: convert aoeblk to blk-mq"), aoedev_downdev has had the possibility of sleeping and causing the following crash. BUG: scheduling while atomic: rmmod/2242/0x00000003 Modules linked in: aoe Preemption disabled at: [] flush+0x95/0x4a0 [aoe] CPU: 7 PID: 2242 Comm: rmmod Tainted: G I 5.2.3 #1 Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.10.0025.030220091519 03/02/2009 Call Trace: dump_stack+0x4f/0x6a ? flush+0x95/0x4a0 [aoe] __schedule_bug.cold+0x44/0x54 __schedule+0x44f/0x680 schedule+0x44/0xd0 blk_mq_freeze_queue_wait+0x46/0xb0 ? wait_woken+0x80/0x80 blk_mq_freeze_queue+0x1b/0x20 aoedev_downdev+0x111/0x160 [aoe] flush+0xff/0x4a0 [aoe] aoedev_exit+0x23/0x30 [aoe] aoe_exit+0x35/0x948 [aoe] __se_sys_delete_module+0x183/0x210 __x64_sys_delete_module+0x16/0x20 do_syscall_64+0x4d/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f24e0043b07 Code: 73 01 c3 48 8b 0d 89 73 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 59 73 0b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe18f7f1e8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f24e0043b07 RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000555c3ecf87c8 RBP: 00007ffe18f7f1f0 R08: 0000000000000000 R09: 0000000000000000 R10: 00007f24e00b4ac0 R11: 0000000000000206 R12: 00007ffe18f7f238 R13: 00007ffe18f7f410 R14: 00007ffe18f80e73 R15: 0000555c3ecf8760 This patch, handling in the same way of pass two, unlocks the locks and restart pass one after aoedev_downdev is done. Fixes: 3582dd291788 ("aoe: convert aoeblk to blk-mq") Signed-off-by: He Zhe Signed-off-by: Jens Axboe --- drivers/block/aoe/aoedev.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/block/aoe/aoedev.c b/drivers/block/aoe/aoedev.c index 5b49f1b33ebe..e2ea2356da06 100644 --- a/drivers/block/aoe/aoedev.c +++ b/drivers/block/aoe/aoedev.c @@ -323,10 +323,14 @@ flush(const char __user *str, size_t cnt, int exiting) } flush_scheduled_work(); - /* pass one: without sleeping, do aoedev_downdev */ + /* pass one: do aoedev_downdev, which might sleep */ +restart1: spin_lock_irqsave(&devlist_lock, flags); for (d = devlist; d; d = d->next) { spin_lock(&d->lock); + if (d->flags & DEVFL_TKILL) + goto cont; + if (exiting) { /* unconditionally take each device down */ } else if (specified) { @@ -338,8 +342,11 @@ flush(const char __user *str, size_t cnt, int exiting) || d->ref) goto cont; + spin_unlock(&d->lock); + spin_unlock_irqrestore(&devlist_lock, flags); aoedev_downdev(d); d->flags |= DEVFL_TKILL; + goto restart1; cont: spin_unlock(&d->lock); } @@ -348,7 +355,7 @@ cont: /* pass two: call freedev, which might sleep, * for aoedevs marked with DEVFL_TKILL */ -restart: +restart2: spin_lock_irqsave(&devlist_lock, flags); for (d = devlist; d; d = d->next) { spin_lock(&d->lock); @@ -357,7 +364,7 @@ restart: spin_unlock(&d->lock); spin_unlock_irqrestore(&devlist_lock, flags); freedev(d); - goto restart; + goto restart2; } spin_unlock(&d->lock); } -- cgit From 08d383a74948b43eb6e96c86153e63cbf276f1fa Mon Sep 17 00:00:00 2001 From: Paolo Valente Date: Wed, 7 Aug 2019 16:17:53 +0200 Subject: block, bfq: reset last_completed_rq_bfqq if the pointed queue is freed Since commit 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O"), BFQ stores, in a per-device pointer last_completed_rq_bfqq, the last bfq_queue that had an I/O request completed. If some bfq_queue receives new I/O right after the last request of last_completed_rq_bfqq has been completed, then last_completed_rq_bfqq may be a waker bfq_queue. But if the bfq_queue last_completed_rq_bfqq points to is freed, then last_completed_rq_bfqq becomes a dangling reference. This commit resets last_completed_rq_bfqq if the pointed bfq_queue is freed. Fixes: 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") Reported-by: Douglas Anderson Tested-by: Douglas Anderson Signed-off-by: Paolo Valente Signed-off-by: Jens Axboe --- block/bfq-iosched.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c index 586fcfe227ea..b2009650afc2 100644 --- a/block/bfq-iosched.c +++ b/block/bfq-iosched.c @@ -1924,12 +1924,13 @@ static void bfq_add_request(struct request *rq) * confirmed no later than during the next * I/O-plugging interval for bfqq. */ - if (!bfq_bfqq_has_short_ttime(bfqq) && + if (bfqd->last_completed_rq_bfqq && + !bfq_bfqq_has_short_ttime(bfqq) && ktime_get_ns() - bfqd->last_completion < 200 * NSEC_PER_USEC) { if (bfqd->last_completed_rq_bfqq != bfqq && - bfqd->last_completed_rq_bfqq != - bfqq->waker_bfqq) { + bfqd->last_completed_rq_bfqq != + bfqq->waker_bfqq) { /* * First synchronization detected with * a candidate waker queue, or with a @@ -4808,6 +4809,9 @@ void bfq_put_queue(struct bfq_queue *bfqq) bfqq->bfqd->burst_size--; } + if (bfqq->bfqd && bfqq->bfqd->last_completed_rq_bfqq == bfqq) + bfqq->bfqd->last_completed_rq_bfqq = NULL; + kmem_cache_free(bfq_pool, bfqq); #ifdef CONFIG_BFQ_GROUP_IOSCHED bfqg_and_blkg_put(bfqg); -- cgit From 3f758e844aa9800eb660d60ee10226fa802594d4 Mon Sep 17 00:00:00 2001 From: Paolo Valente Date: Wed, 7 Aug 2019 16:17:54 +0200 Subject: block, bfq: move update of waker and woken list to queue freeing Since commit 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O"), every bfq_queue has a pointer to a waker bfq_queue and a list of the bfq_queues it may wake. In this respect, when a bfq_queue, say Q, remains with no I/O source attached to it, Q cannot be woken by any other bfq_queue, and cannot wake any other bfq_queue. Then Q must be removed from the woken list of its possible waker bfq_queue, and all bfq_queues in the woken list of Q must stop having a waker bfq_queue. Q remains with no I/O source in two cases: when the last process associated with Q exits or when such a process gets associated with a different bfq_queue. Unfortunately, commit 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") performed the above updates only in the first case. This commit fixes this bug by moving these updates to when Q gets freed. This is a simple and safe way to handle all cases, as both the above events, process exit and re-association, lead to Q being freed soon, and because dangling references would come out only after Q gets freed (if no update were performed). Fixes: 13a857a4c4e8 ("block, bfq: detect wakers and unconditionally inject their I/O") Reported-by: Douglas Anderson Tested-by: Douglas Anderson Signed-off-by: Paolo Valente Signed-off-by: Jens Axboe --- block/bfq-iosched.c | 44 +++++++++++++++++++++++++++++--------------- 1 file changed, 29 insertions(+), 15 deletions(-) diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c index b2009650afc2..5f477501bb3d 100644 --- a/block/bfq-iosched.c +++ b/block/bfq-iosched.c @@ -4765,6 +4765,8 @@ static struct request *bfq_dispatch_request(struct blk_mq_hw_ctx *hctx) */ void bfq_put_queue(struct bfq_queue *bfqq) { + struct bfq_queue *item; + struct hlist_node *n; #ifdef CONFIG_BFQ_GROUP_IOSCHED struct bfq_group *bfqg = bfqq_group(bfqq); #endif @@ -4809,6 +4811,33 @@ void bfq_put_queue(struct bfq_queue *bfqq) bfqq->bfqd->burst_size--; } + /* + * bfqq does not exist any longer, so it cannot be woken by + * any other queue, and cannot wake any other queue. Then bfqq + * must be removed from the woken list of its possible waker + * queue, and all queues in the woken list of bfqq must stop + * having a waker queue. Strictly speaking, these updates + * should be performed when bfqq remains with no I/O source + * attached to it, which happens before bfqq gets freed. In + * particular, this happens when the last process associated + * with bfqq exits or gets associated with a different + * queue. However, both events lead to bfqq being freed soon, + * and dangling references would come out only after bfqq gets + * freed. So these updates are done here, as a simple and safe + * way to handle all cases. + */ + /* remove bfqq from woken list */ + if (!hlist_unhashed(&bfqq->woken_list_node)) + hlist_del_init(&bfqq->woken_list_node); + + /* reset waker for all queues in woken list */ + hlist_for_each_entry_safe(item, n, &bfqq->woken_list, + woken_list_node) { + item->waker_bfqq = NULL; + bfq_clear_bfqq_has_waker(item); + hlist_del_init(&item->woken_list_node); + } + if (bfqq->bfqd && bfqq->bfqd->last_completed_rq_bfqq == bfqq) bfqq->bfqd->last_completed_rq_bfqq = NULL; @@ -4839,9 +4868,6 @@ static void bfq_put_cooperator(struct bfq_queue *bfqq) static void bfq_exit_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq) { - struct bfq_queue *item; - struct hlist_node *n; - if (bfqq == bfqd->in_service_queue) { __bfq_bfqq_expire(bfqd, bfqq, BFQQE_BUDGET_TIMEOUT); bfq_schedule_dispatch(bfqd); @@ -4851,18 +4877,6 @@ static void bfq_exit_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq) bfq_put_cooperator(bfqq); - /* remove bfqq from woken list */ - if (!hlist_unhashed(&bfqq->woken_list_node)) - hlist_del_init(&bfqq->woken_list_node); - - /* reset waker for all queues in woken list */ - hlist_for_each_entry_safe(item, n, &bfqq->woken_list, - woken_list_node) { - item->waker_bfqq = NULL; - bfq_clear_bfqq_has_waker(item); - hlist_del_init(&item->woken_list_node); - } - bfq_put_queue(bfqq); /* release process reference */ } -- cgit From fd03177c33b287c6541f4048f1d67b7b45a1abc9 Mon Sep 17 00:00:00 2001 From: Paolo Valente Date: Wed, 7 Aug 2019 19:21:11 +0200 Subject: block, bfq: handle NULL return value by bfq_init_rq() As reported in [1], the call bfq_init_rq(rq) may return NULL in case of OOM (in particular, if rq->elv.icq is NULL because memory allocation failed in failed in ioc_create_icq()). This commit handles this circumstance. [1] https://lkml.org/lkml/2019/7/22/824 Cc: Hsin-Yi Wang Cc: Nicolas Boichat Cc: Doug Anderson Reported-by: Guenter Roeck Reported-by: Hsin-Yi Wang Reviewed-by: Guenter Roeck Signed-off-by: Paolo Valente Signed-off-by: Jens Axboe --- block/bfq-iosched.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c index 5f477501bb3d..b33be928d164 100644 --- a/block/bfq-iosched.c +++ b/block/bfq-iosched.c @@ -2251,9 +2251,14 @@ static void bfq_request_merged(struct request_queue *q, struct request *req, blk_rq_pos(container_of(rb_prev(&req->rb_node), struct request, rb_node))) { struct bfq_queue *bfqq = bfq_init_rq(req); - struct bfq_data *bfqd = bfqq->bfqd; + struct bfq_data *bfqd; struct request *prev, *next_rq; + if (!bfqq) + return; + + bfqd = bfqq->bfqd; + /* Reposition request in its sort_list */ elv_rb_del(&bfqq->sort_list, req); elv_rb_add(&bfqq->sort_list, req); @@ -2300,6 +2305,9 @@ static void bfq_requests_merged(struct request_queue *q, struct request *rq, struct bfq_queue *bfqq = bfq_init_rq(rq), *next_bfqq = bfq_init_rq(next); + if (!bfqq) + return; + /* * If next and rq belong to the same bfq_queue and next is older * than rq, then reposition rq in the fifo (by substituting next @@ -5454,12 +5462,12 @@ static void bfq_insert_request(struct blk_mq_hw_ctx *hctx, struct request *rq, spin_lock_irq(&bfqd->lock); bfqq = bfq_init_rq(rq); - if (at_head || blk_rq_is_passthrough(rq)) { + if (!bfqq || at_head || blk_rq_is_passthrough(rq)) { if (at_head) list_add(&rq->queuelist, &bfqd->dispatch); else list_add_tail(&rq->queuelist, &bfqd->dispatch); - } else { /* bfqq is assumed to be non null here */ + } else { idle_timer_disabled = __bfq_insert_request(bfqd, rq); /* * Update bfqq, because, if a queue merge has occurred -- cgit From e91455bad5cff40a8c232f2204a5104127e3fec2 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 7 Aug 2019 11:36:47 +0200 Subject: bdev: Fixup error handling in blkdev_get() Commit 89e524c04fa9 ("loop: Fix mount(2) failure due to race with LOOP_SET_FD") converted blkdev_get() to use the new helpers for finishing claiming of a block device. However the conversion botched the error handling in blkdev_get() and thus the bdev has been marked as held even in case __blkdev_get() returned error. This led to occasional warnings with block/001 test from blktests like: kernel: WARNING: CPU: 5 PID: 907 at fs/block_dev.c:1899 __blkdev_put+0x396/0x3a0 Correct the error handling. CC: stable@vger.kernel.org Fixes: 89e524c04fa9 ("loop: Fix mount(2) failure due to race with LOOP_SET_FD") Signed-off-by: Jan Kara Signed-off-by: Jens Axboe --- fs/block_dev.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/block_dev.c b/fs/block_dev.c index 131e2e0582a6..eb657ab94060 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -1750,7 +1750,10 @@ int blkdev_get(struct block_device *bdev, fmode_t mode, void *holder) /* finish claiming */ mutex_lock(&bdev->bd_mutex); - bd_finish_claiming(bdev, whole, holder); + if (!res) + bd_finish_claiming(bdev, whole, holder); + else + bd_abort_claiming(bdev, whole, holder); /* * Block event polling for write claims if requested. Any * write holder makes the write_holder state stick until -- cgit From 27709ae4e2fe6cf7da2ae45e718e190c5433342b Mon Sep 17 00:00:00 2001 From: Thiébaud Weksteen Date: Tue, 6 Aug 2019 13:00:50 +0200 Subject: usb: setup authorized_default attributes using usb_bus_notify MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, the authorized_default and interface_authorized_default attributes for HCD are set up after the uevent has been sent to userland. This creates a race condition where userland may fail to access this file when processing the event. Move the appending of these attributes earlier relying on the usb_bus_notify dispatcher. Signed-off-by: Thiébaud Weksteen Cc: stable Link: https://lore.kernel.org/r/20190806110050.38918-1-tweek@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 123 ----------------------------------------------- drivers/usb/core/sysfs.c | 121 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/usb/core/usb.h | 5 ++ 3 files changed, 126 insertions(+), 123 deletions(-) diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 9320787ac2e6..2ccbc2f83570 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -103,11 +103,6 @@ static DEFINE_SPINLOCK(hcd_urb_unlink_lock); /* wait queue for synchronous unlinks */ DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue); -static inline int is_root_hub(struct usb_device *udev) -{ - return (udev->parent == NULL); -} - /*-------------------------------------------------------------------------*/ /* @@ -880,101 +875,6 @@ static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) } - -/* - * Show & store the current value of authorized_default - */ -static ssize_t authorized_default_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct usb_device *rh_usb_dev = to_usb_device(dev); - struct usb_bus *usb_bus = rh_usb_dev->bus; - struct usb_hcd *hcd; - - hcd = bus_to_hcd(usb_bus); - return snprintf(buf, PAGE_SIZE, "%u\n", hcd->dev_policy); -} - -static ssize_t authorized_default_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - ssize_t result; - unsigned val; - struct usb_device *rh_usb_dev = to_usb_device(dev); - struct usb_bus *usb_bus = rh_usb_dev->bus; - struct usb_hcd *hcd; - - hcd = bus_to_hcd(usb_bus); - result = sscanf(buf, "%u\n", &val); - if (result == 1) { - hcd->dev_policy = val <= USB_DEVICE_AUTHORIZE_INTERNAL ? - val : USB_DEVICE_AUTHORIZE_ALL; - result = size; - } else { - result = -EINVAL; - } - return result; -} -static DEVICE_ATTR_RW(authorized_default); - -/* - * interface_authorized_default_show - show default authorization status - * for USB interfaces - * - * note: interface_authorized_default is the default value - * for initializing the authorized attribute of interfaces - */ -static ssize_t interface_authorized_default_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct usb_device *usb_dev = to_usb_device(dev); - struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus); - - return sprintf(buf, "%u\n", !!HCD_INTF_AUTHORIZED(hcd)); -} - -/* - * interface_authorized_default_store - store default authorization status - * for USB interfaces - * - * note: interface_authorized_default is the default value - * for initializing the authorized attribute of interfaces - */ -static ssize_t interface_authorized_default_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct usb_device *usb_dev = to_usb_device(dev); - struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus); - int rc = count; - bool val; - - if (strtobool(buf, &val) != 0) - return -EINVAL; - - if (val) - set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags); - else - clear_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags); - - return rc; -} -static DEVICE_ATTR_RW(interface_authorized_default); - -/* Group all the USB bus attributes */ -static struct attribute *usb_bus_attrs[] = { - &dev_attr_authorized_default.attr, - &dev_attr_interface_authorized_default.attr, - NULL, -}; - -static const struct attribute_group usb_bus_attr_group = { - .name = NULL, /* we want them in the same directory */ - .attrs = usb_bus_attrs, -}; - - - /*-------------------------------------------------------------------------*/ /** @@ -2894,32 +2794,11 @@ int usb_add_hcd(struct usb_hcd *hcd, if (retval != 0) goto err_register_root_hub; - retval = sysfs_create_group(&rhdev->dev.kobj, &usb_bus_attr_group); - if (retval < 0) { - printk(KERN_ERR "Cannot register USB bus sysfs attributes: %d\n", - retval); - goto error_create_attr_group; - } if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) usb_hcd_poll_rh_status(hcd); return retval; -error_create_attr_group: - clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); - if (HC_IS_RUNNING(hcd->state)) - hcd->state = HC_STATE_QUIESCING; - spin_lock_irq(&hcd_root_hub_lock); - hcd->rh_registered = 0; - spin_unlock_irq(&hcd_root_hub_lock); - -#ifdef CONFIG_PM - cancel_work_sync(&hcd->wakeup_work); -#endif - cancel_work_sync(&hcd->died_work); - mutex_lock(&usb_bus_idr_lock); - usb_disconnect(&rhdev); /* Sets rhdev to NULL */ - mutex_unlock(&usb_bus_idr_lock); err_register_root_hub: hcd->rh_pollable = 0; clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); @@ -2963,8 +2842,6 @@ void usb_remove_hcd(struct usb_hcd *hcd) dev_info(hcd->self.controller, "remove, state %x\n", hcd->state); usb_get_dev(rhdev); - sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group); - clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); if (HC_IS_RUNNING (hcd->state)) hcd->state = HC_STATE_QUIESCING; diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 7e88fdfe3cf5..f19694e69f5c 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include "usb.h" @@ -922,6 +923,116 @@ static struct bin_attribute dev_bin_attr_descriptors = { .size = 18 + 65535, /* dev descr + max-size raw descriptor */ }; +/* + * Show & store the current value of authorized_default + */ +static ssize_t authorized_default_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *rh_usb_dev = to_usb_device(dev); + struct usb_bus *usb_bus = rh_usb_dev->bus; + struct usb_hcd *hcd; + + hcd = bus_to_hcd(usb_bus); + return snprintf(buf, PAGE_SIZE, "%u\n", hcd->dev_policy); +} + +static ssize_t authorized_default_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + ssize_t result; + unsigned int val; + struct usb_device *rh_usb_dev = to_usb_device(dev); + struct usb_bus *usb_bus = rh_usb_dev->bus; + struct usb_hcd *hcd; + + hcd = bus_to_hcd(usb_bus); + result = sscanf(buf, "%u\n", &val); + if (result == 1) { + hcd->dev_policy = val <= USB_DEVICE_AUTHORIZE_INTERNAL ? + val : USB_DEVICE_AUTHORIZE_ALL; + result = size; + } else { + result = -EINVAL; + } + return result; +} +static DEVICE_ATTR_RW(authorized_default); + +/* + * interface_authorized_default_show - show default authorization status + * for USB interfaces + * + * note: interface_authorized_default is the default value + * for initializing the authorized attribute of interfaces + */ +static ssize_t interface_authorized_default_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_device *usb_dev = to_usb_device(dev); + struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus); + + return sprintf(buf, "%u\n", !!HCD_INTF_AUTHORIZED(hcd)); +} + +/* + * interface_authorized_default_store - store default authorization status + * for USB interfaces + * + * note: interface_authorized_default is the default value + * for initializing the authorized attribute of interfaces + */ +static ssize_t interface_authorized_default_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct usb_device *usb_dev = to_usb_device(dev); + struct usb_hcd *hcd = bus_to_hcd(usb_dev->bus); + int rc = count; + bool val; + + if (strtobool(buf, &val) != 0) + return -EINVAL; + + if (val) + set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags); + else + clear_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags); + + return rc; +} +static DEVICE_ATTR_RW(interface_authorized_default); + +/* Group all the USB bus attributes */ +static struct attribute *usb_bus_attrs[] = { + &dev_attr_authorized_default.attr, + &dev_attr_interface_authorized_default.attr, + NULL, +}; + +static const struct attribute_group usb_bus_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = usb_bus_attrs, +}; + + +static int add_default_authorized_attributes(struct device *dev) +{ + int rc = 0; + + if (is_usb_device(dev)) + rc = sysfs_create_group(&dev->kobj, &usb_bus_attr_group); + + return rc; +} + +static void remove_default_authorized_attributes(struct device *dev) +{ + if (is_usb_device(dev)) { + sysfs_remove_group(&dev->kobj, &usb_bus_attr_group); + } +} + int usb_create_sysfs_dev_files(struct usb_device *udev) { struct device *dev = &udev->dev; @@ -938,7 +1049,14 @@ int usb_create_sysfs_dev_files(struct usb_device *udev) retval = add_power_attributes(dev); if (retval) goto error; + + if (is_root_hub(udev)) { + retval = add_default_authorized_attributes(dev); + if (retval) + goto error; + } return retval; + error: usb_remove_sysfs_dev_files(udev); return retval; @@ -948,6 +1066,9 @@ void usb_remove_sysfs_dev_files(struct usb_device *udev) { struct device *dev = &udev->dev; + if (is_root_hub(udev)) + remove_default_authorized_attributes(dev); + remove_power_attributes(dev); remove_persist_attributes(dev); device_remove_bin_file(dev, &dev_bin_attr_descriptors); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index bd8d01f85a13..0c9fde5ad052 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -153,6 +153,11 @@ static inline int is_usb_port(const struct device *dev) return dev->type == &usb_port_device_type; } +static inline int is_root_hub(struct usb_device *udev) +{ + return (udev->parent == NULL); +} + /* Do the same for device drivers and interface drivers. */ static inline int is_usb_device_driver(struct device_driver *drv) -- cgit From d0a255e795ab976481565f6ac178314b34fbf891 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 8 Aug 2019 11:17:01 -0400 Subject: loop: set PF_MEMALLOC_NOIO for the worker thread A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 #12 [ffff88272f5af760] new_slab at ffffffff811f4523 #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c #23 [ffff88272f5afec0] kthread at ffffffff810a8428 #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe --- drivers/block/loop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 3036883fc9f8..ab7ca5989097 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -885,7 +885,7 @@ static void loop_unprepare_queue(struct loop_device *lo) static int loop_kthread_worker_fn(void *worker_ptr) { - current->flags |= PF_LESS_THROTTLE; + current->flags |= PF_LESS_THROTTLE | PF_MEMALLOC_NOIO; return kthread_worker_fn(worker_ptr); } -- cgit From 30e235389faadb9e3d918887b1f126155d7d761d Mon Sep 17 00:00:00 2001 From: Jia He Date: Wed, 7 Aug 2019 12:58:51 +0800 Subject: arm64: mm: add missing PTE_SPECIAL in pte_mkdevmap on arm64 Without this patch, the MAP_SYNC test case will cause a print_bad_pte warning on arm64 as follows: [ 25.542693] BUG: Bad page map in process mapdax333 pte:2e8000448800f53 pmd:41ff5f003 [ 25.546360] page:ffff7e0010220000 refcount:1 mapcount:-1 mapping:ffff8003e29c7440 index:0x0 [ 25.550281] ext4_dax_aops [ 25.550282] name:"__aaabbbcccddd__" [ 25.551553] flags: 0x3ffff0000001002(referenced|reserved) [ 25.555802] raw: 03ffff0000001002 ffff8003dfffa908 0000000000000000 ffff8003e29c7440 [ 25.559446] raw: 0000000000000000 0000000000000000 00000001fffffffe 0000000000000000 [ 25.563075] page dumped because: bad pte [ 25.564938] addr:0000ffffbe05b000 vm_flags:208000fb anon_vma:0000000000000000 mapping:ffff8003e29c7440 index:0 [ 25.574272] file:__aaabbbcccddd__ fault:ext4_dax_fault mmmmap:ext4_file_mmap readpage:0x0 [ 25.578799] CPU: 1 PID: 1180 Comm: mapdax333 Not tainted 5.2.0+ #21 [ 25.581702] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 25.585624] Call trace: [ 25.587008] dump_backtrace+0x0/0x178 [ 25.588799] show_stack+0x24/0x30 [ 25.590328] dump_stack+0xa8/0xcc [ 25.591901] print_bad_pte+0x18c/0x218 [ 25.593628] unmap_page_range+0x778/0xc00 [ 25.595506] unmap_single_vma+0x94/0xe8 [ 25.597304] unmap_vmas+0x90/0x108 [ 25.598901] unmap_region+0xc0/0x128 [ 25.600566] __do_munmap+0x284/0x3f0 [ 25.602245] __vm_munmap+0x78/0xe0 [ 25.603820] __arm64_sys_munmap+0x34/0x48 [ 25.605709] el0_svc_common.constprop.0+0x78/0x168 [ 25.607956] el0_svc_handler+0x34/0x90 [ 25.609698] el0_svc+0x8/0xc [...] The root cause is in _vm_normal_page, without the PTE_SPECIAL bit, the return value will be incorrectly set to pfn_to_page(pfn) instead of NULL. Besides, this patch also rewrite the pmd_mkdevmap to avoid setting PTE_SPECIAL for pmd The MAP_SYNC test case is as follows(Provided by Yibo Cai) $#include $#include $#include $#include $#include $#ifndef MAP_SYNC $#define MAP_SYNC 0x80000 $#endif /* mount -o dax /dev/pmem0 /mnt */ $#define F "/mnt/__aaabbbcccddd__" int main(void) { int fd; char buf[4096]; void *addr; if ((fd = open(F, O_CREAT|O_TRUNC|O_RDWR, 0644)) < 0) { perror("open1"); return 1; } if (write(fd, buf, 4096) != 4096) { perror("lseek"); return 1; } addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED|MAP_SYNC, fd, 0); if (addr == MAP_FAILED) { perror("mmap"); printf("did you mount with '-o dax'?\n"); return 1; } memset(addr, 0x55, 4096); if (munmap(addr, 4096) == -1) { perror("munmap"); return 1; } close(fd); return 0; } Fixes: 73b20c84d42d ("arm64: mm: implement pte_devmap support") Reported-by: Yibo Cai Acked-by: Will Deacon Acked-by: Robin Murphy Signed-off-by: Jia He Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/pgtable.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 5fdcfe237338..e09760ece844 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -209,7 +209,7 @@ static inline pmd_t pmd_mkcont(pmd_t pmd) static inline pte_t pte_mkdevmap(pte_t pte) { - return set_pte_bit(pte, __pgprot(PTE_DEVMAP)); + return set_pte_bit(pte, __pgprot(PTE_DEVMAP | PTE_SPECIAL)); } static inline void set_pte(pte_t *ptep, pte_t pte) @@ -396,7 +396,10 @@ static inline int pmd_protnone(pmd_t pmd) #ifdef CONFIG_TRANSPARENT_HUGEPAGE #define pmd_devmap(pmd) pte_devmap(pmd_pte(pmd)) #endif -#define pmd_mkdevmap(pmd) pte_pmd(pte_mkdevmap(pmd_pte(pmd))) +static inline pmd_t pmd_mkdevmap(pmd_t pmd) +{ + return pte_pmd(set_pte_bit(pmd_pte(pmd), __pgprot(PTE_DEVMAP))); +} #define __pmd_to_phys(pmd) __pte_to_phys(pmd_pte(pmd)) #define __phys_to_pmd_val(phys) __phys_to_pte_val(phys) -- cgit From 85127775a65fc58e69af0c44513937d471ccbe7b Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 6 Aug 2019 11:24:09 -0300 Subject: perf annotate: Fix printing of unaugmented disassembled instructions from BPF The code to disassemble BPF programs uses binutil's disassembling routines, and those use in turn fprintf to print to a memstream FILE, adding a newline at the end of each line, which ends up confusing the TUI routines called from: annotate_browser__write() annotate_line__write() annotate_browser__printf() ui_browser__vprintf() SLsmg_vprintf() The SLsmg_vprintf() function in the slang library gets confused with the terminating newline, so make the disasm_line__parse() function that parses the lines produced by the BPF specific disassembler (that uses binutil's libopcodes) and the lines produced by the objdump based disassembler used for everything else (and that doesn't adds this terminating newline) trim the end of the line in addition of the beginning. This way when disasm_line->ops.raw, i.e. for instructions without a special scnprintf() method, we'll not have that \n getting in the way of filling the screen right after the instruction with spaces to avoid leaving what was on the screen before and thus garbling the annotation screen, breaking scrolling, etc. Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Cc: Song Liu Fixes: 6987561c9e86 ("perf annotate: Enable annotation of BPF programs") Link: https://lkml.kernel.org/n/tip-unbr5a5efakobfr6rhxq99ta@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/annotate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c index ac9ad2330f93..163536720149 100644 --- a/tools/perf/util/annotate.c +++ b/tools/perf/util/annotate.c @@ -1122,7 +1122,7 @@ static int disasm_line__parse(char *line, const char **namep, char **rawp) goto out; (*rawp)[0] = tmp; - *rawp = skip_spaces(*rawp); + *rawp = strim(*rawp); return 0; -- cgit From 3de7ae0b2a1d86dbb23d0cb135150534fdb2e836 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Thu, 8 Aug 2019 09:48:23 +0300 Subject: perf db-export: Fix thread__exec_comm() Threads synthesized from /proc have comms with a start time of zero, and not marked as "exec". Currently, there can be 2 such comms. The first is created by processing a synthesized fork event and is set to the parent's comm string, and the second by processing a synthesized comm event set to the thread's current comm string. In the absence of an "exec" comm, thread__exec_comm() picks the last (oldest) comm, which, in the case above, is the parent's comm string. For a main thread, that is very probably wrong. Use the second-to-last in that case. This affects only db-export because it is the only user of thread__exec_comm(). Example: $ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1 $ sudo chown ahunter pt-a-sleep-1 Before: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1.db branches calls $ sqlite3 -header -column pt-a-sleep-1.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kthreadd 3 78 78 5 sudo 4 15180 15180 5 sudo 5 15180 15182 7 kworker/4: 6 10335 10335 8 kthreadd 7 55 55 10 systemd 8 865 865 10 systemd 9 865 875 13 perf 10 15181 15181 15 sleep 10 15181 15181 16 kworker/3: 11 14179 14179 17 kthreadd 12 29376 29376 19 systemd 13 746 746 21 systemd 14 401 401 23 systemd 15 879 879 23 systemd 16 879 945 25 kthreadd 17 556 556 27 kworker/u1 18 14136 14136 28 kworker/u1 19 15021 15021 29 kthreadd 20 509 509 31 systemd 21 836 836 31 systemd 22 836 967 33 systemd 23 1148 1148 33 systemd 24 1148 1163 35 kworker/2: 25 17988 17988 36 kworker/0: 26 13478 13478 After: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1b.db branches calls $ sqlite3 -header -column pt-a-sleep-1b.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kswapd0 3 78 78 4 perf 4 15180 15180 4 perf 5 15180 15182 6 kworker/4: 6 10335 10335 7 kcompactd0 7 55 55 8 accounts-d 8 865 865 8 accounts-d 9 865 875 10 perf 10 15181 15181 12 sleep 10 15181 15181 13 kworker/3: 11 14179 14179 14 kworker/1: 12 29376 29376 15 haveged 13 746 746 16 systemd-jo 14 401 401 17 NetworkMan 15 879 879 17 NetworkMan 16 879 945 19 irq/131-iw 17 556 556 20 kworker/u1 18 14136 14136 21 kworker/u1 19 15021 15021 22 kworker/u1 20 509 509 23 thermald 21 836 836 23 thermald 22 836 967 25 unity-sett 23 1148 1148 25 unity-sett 24 1148 1163 27 kworker/2: 25 17988 17988 28 kworker/0: 26 13478 13478 Signed-off-by: Adrian Hunter Cc: Jiri Olsa Cc: stable@vger.kernel.org Fixes: 65de51f93ebf ("perf tools: Identify which comms are from exec") Link: http://lkml.kernel.org/r/20190808064823.14846-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/thread.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c index 873ab505ca80..590793cc5142 100644 --- a/tools/perf/util/thread.c +++ b/tools/perf/util/thread.c @@ -214,14 +214,24 @@ struct comm *thread__comm(const struct thread *thread) struct comm *thread__exec_comm(const struct thread *thread) { - struct comm *comm, *last = NULL; + struct comm *comm, *last = NULL, *second_last = NULL; list_for_each_entry(comm, &thread->comm_list, list) { if (comm->exec) return comm; + second_last = last; last = comm; } + /* + * 'last' with no start time might be the parent's comm of a synthesized + * thread (created by processing a synthesized fork event). For a main + * thread, that is very probably wrong. Prefer a later comm to avoid + * that case. + */ + if (second_last && !last->start && thread->pid_ == thread->tid) + return second_last; + return last; } -- cgit From cf30ae726c011e0372fd4c2d588466c8b50a8907 Mon Sep 17 00:00:00 2001 From: He Zhe Date: Fri, 2 Aug 2019 16:29:51 +0800 Subject: perf ftrace: Fix failure to set cpumask when only one cpu is present The buffer containing the string used to set cpumask is overwritten at the end of the string later in cpu_map__snprint_mask due to not enough memory space, when there is only one cpu. And thus causes the following failure: $ perf ftrace ls failed to reset ftrace $ This patch fixes the calculation of the cpumask string size. Signed-off-by: He Zhe Tested-by: Arnaldo Carvalho de Melo Cc: Alexander Shishkin Cc: Alexey Budankov Cc: Jiri Olsa Cc: Kan Liang Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Fixes: dc23103278c5 ("perf ftrace: Add support for -a and -C option") Link: http://lkml.kernel.org/r/1564734592-15624-1-git-send-email-zhe.he@windriver.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-ftrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/builtin-ftrace.c b/tools/perf/builtin-ftrace.c index 66d5a6658daf..019312810405 100644 --- a/tools/perf/builtin-ftrace.c +++ b/tools/perf/builtin-ftrace.c @@ -173,7 +173,7 @@ static int set_tracing_cpumask(struct cpu_map *cpumap) int last_cpu; last_cpu = cpu_map__cpu(cpumap, cpumap->nr - 1); - mask_size = (last_cpu + 3) / 4 + 1; + mask_size = last_cpu / 4 + 2; /* one more byte for EOS */ mask_size += last_cpu / 32; /* ',' is needed for every 32th cpus */ cpumask = malloc(mask_size); -- cgit From 5f5e25f1c7933a6e1673515c0b1d5acd82fea1ed Mon Sep 17 00:00:00 2001 From: He Zhe Date: Fri, 2 Aug 2019 16:29:52 +0800 Subject: perf cpumap: Fix writing to illegal memory in handling cpumap mask cpu_map__snprint_mask() would write to illegal memory pointed by zalloc(0) when there is only one cpu. This patch fixes the calculation and adds sanity check against the input parameters. Signed-off-by: He Zhe Cc: Alexander Shishkin Cc: Alexey Budankov Cc: Jiri Olsa Cc: Kan Liang Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Fixes: 4400ac8a9a90 ("perf cpumap: Introduce cpu_map__snprint_mask()") Link: http://lkml.kernel.org/r/1564734592-15624-2-git-send-email-zhe.he@windriver.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/cpumap.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/cpumap.c b/tools/perf/util/cpumap.c index 3acfbe34ebaf..39cce66b4ebc 100644 --- a/tools/perf/util/cpumap.c +++ b/tools/perf/util/cpumap.c @@ -751,7 +751,10 @@ size_t cpu_map__snprint_mask(struct cpu_map *map, char *buf, size_t size) unsigned char *bitmap; int last_cpu = cpu_map__cpu(map, map->nr - 1); - bitmap = zalloc((last_cpu + 7) / 8); + if (buf == NULL) + return 0; + + bitmap = zalloc(last_cpu / 8 + 1); if (bitmap == NULL) { buf[0] = '\0'; return 0; -- cgit From 89b66500f739e0033ef59011e3df694f2053679d Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Thu, 1 Aug 2019 12:28:12 +0900 Subject: perf tools: Fix a typo in a variable name in the Documentation Makefile This patch fix a spelling typo in a variable name in the Documentation Makefile. Signed-off-by: Masanari Iida Reviewed-by: Mukesh Ojha Cc: Alexander Shishkin Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20190801032812.25018-1-standby24x7@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Documentation/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/Documentation/Makefile b/tools/perf/Documentation/Makefile index 6d148a40551c..adc5a7e44b98 100644 --- a/tools/perf/Documentation/Makefile +++ b/tools/perf/Documentation/Makefile @@ -242,7 +242,7 @@ $(OUTPUT)doc.dep : $(wildcard *.txt) build-docdep.perl $(PERL_PATH) ./build-docdep.perl >$@+ $(QUIET_STDERR) && \ mv $@+ $@ --include $(OUPTUT)doc.dep +-include $(OUTPUT)doc.dep _cmds_txt = cmds-ancillaryinterrogators.txt \ cmds-ancillarymanipulators.txt \ -- cgit From fa37bab6d7154658d8a35920513f9396587754cc Mon Sep 17 00:00:00 2001 From: Ian Rogers Date: Wed, 31 Jul 2019 15:54:41 -0700 Subject: perf tools: Fix include paths in ui directory These paths point to the wrong location but still work because they get picked up by a -I flag that happens to direct to the correct file. Fix paths to point to the correct location without -I flags. Signed-off-by: Ian Rogers Cc: Alexander Shishkin Cc: Andi Kleen Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/20190731225441.233800-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/ui/browser.c | 9 +++++---- tools/perf/ui/tui/progress.c | 2 +- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/tools/perf/ui/browser.c b/tools/perf/ui/browser.c index f80c51d53565..d227d74b28f8 100644 --- a/tools/perf/ui/browser.c +++ b/tools/perf/ui/browser.c @@ -1,7 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 -#include "../string2.h" -#include "../config.h" -#include "../../perf.h" +#include "../util/util.h" +#include "../util/string2.h" +#include "../util/config.h" +#include "../perf.h" #include "libslang.h" #include "ui.h" #include "util.h" @@ -14,7 +15,7 @@ #include "browser.h" #include "helpline.h" #include "keysyms.h" -#include "../color.h" +#include "../util/color.h" #include #include diff --git a/tools/perf/ui/tui/progress.c b/tools/perf/ui/tui/progress.c index bc134b82829d..5a24dd3ce4db 100644 --- a/tools/perf/ui/tui/progress.c +++ b/tools/perf/ui/tui/progress.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include -#include "../cache.h" +#include "../../util/cache.h" #include "../progress.h" #include "../libslang.h" #include "../ui.h" -- cgit From 12a6d2940b5f02b4b9f71ce098e3bb02bc24a9ea Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Wed, 24 Jul 2019 14:27:02 +0200 Subject: perf record: Fix module size on s390 On s390 the modules loaded in memory have the text segment located after the GOT and Relocation table. This can be seen with this output: [root@m35lp76 perf]# fgrep qeth /proc/modules qeth 151552 1 qeth_l2, Live 0x000003ff800b2000 ... [root@m35lp76 perf]# cat /sys/module/qeth/sections/.text 0x000003ff800b3990 [root@m35lp76 perf]# There is an offset of 0x1990 bytes. The size of the qeth module is 151552 bytes (0x25000 in hex). The location of the GOT/relocation table at the beginning of a module is unique to s390. commit 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map") adjusts the start address of a module in the map structures, but does not adjust the size of the modules. This leads to overlapping of module maps as this example shows: [root@m35lp76 perf] # ./perf report -D 0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x25000) @ 0]: x /lib/modules/.../qeth.ko.xz 0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x8000) @ 0]: x /lib/modules/.../ip6_tables.ko.xz The module qeth.ko has an adjusted start address modified to b3990, but its size is unchanged and the module ends at 0x3ff800d8990. This end address overlaps with the next modules start address of 0x3ff800d85a0. When the size of the leading GOT/Relocation table stored in the beginning of the text segment (0x1990 bytes) is subtracted from module qeth end address, there are no overlaps anymore: 0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000 which is the same as 0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000. To fix this issue, also adjust the modules size in function arch__fix_module_text_start(). Add another function parameter named size and reduce the size of the module when the text segment start address is changed. Output after: 0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x23670) @ 0]: x /lib/modules/.../qeth.ko.xz 0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x7a60) @ 0]: x /lib/modules/.../ip6_tables.ko.xz Reported-by: Stefan Liebler Signed-off-by: Thomas Richter Acked-by: Heiko Carstens Cc: Hendrik Brueckner Cc: Vasily Gorbik Cc: stable@vger.kernel.org Fixes: 203d8a4aa6ed ("perf s390: Fix 'start' address of module's map") Link: http://lkml.kernel.org/r/20190724122703.3996-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/s390/util/machine.c | 14 +++++++++++++- tools/perf/util/machine.c | 3 ++- tools/perf/util/machine.h | 2 +- 3 files changed, 16 insertions(+), 3 deletions(-) diff --git a/tools/perf/arch/s390/util/machine.c b/tools/perf/arch/s390/util/machine.c index a19690a17291..de26b1441a48 100644 --- a/tools/perf/arch/s390/util/machine.c +++ b/tools/perf/arch/s390/util/machine.c @@ -7,7 +7,7 @@ #include "api/fs/fs.h" #include "debug.h" -int arch__fix_module_text_start(u64 *start, const char *name) +int arch__fix_module_text_start(u64 *start, u64 *size, const char *name) { u64 m_start = *start; char path[PATH_MAX]; @@ -17,6 +17,18 @@ int arch__fix_module_text_start(u64 *start, const char *name) if (sysfs__read_ull(path, (unsigned long long *)start) < 0) { pr_debug2("Using module %s start:%#lx\n", path, m_start); *start = m_start; + } else { + /* Successful read of the modules segment text start address. + * Calculate difference between module start address + * in memory and module text segment start address. + * For example module load address is 0x3ff8011b000 + * (from /proc/modules) and module text segment start + * address is 0x3ff8011b870 (from file above). + * + * Adjust the module size and subtract the GOT table + * size located at the beginning of the module. + */ + *size -= (*start - m_start); } return 0; diff --git a/tools/perf/util/machine.c b/tools/perf/util/machine.c index cf826eca3aaf..83b2fbbeeb90 100644 --- a/tools/perf/util/machine.c +++ b/tools/perf/util/machine.c @@ -1378,6 +1378,7 @@ static int machine__set_modules_path(struct machine *machine) return map_groups__set_modules_path_dir(&machine->kmaps, modules_path, 0); } int __weak arch__fix_module_text_start(u64 *start __maybe_unused, + u64 *size __maybe_unused, const char *name __maybe_unused) { return 0; @@ -1389,7 +1390,7 @@ static int machine__create_module(void *arg, const char *name, u64 start, struct machine *machine = arg; struct map *map; - if (arch__fix_module_text_start(&start, name) < 0) + if (arch__fix_module_text_start(&start, &size, name) < 0) return -1; map = machine__findnew_module_map(machine, start, name); diff --git a/tools/perf/util/machine.h b/tools/perf/util/machine.h index f70ab98a7bde..7aa38da26427 100644 --- a/tools/perf/util/machine.h +++ b/tools/perf/util/machine.h @@ -222,7 +222,7 @@ struct symbol *machine__find_kernel_symbol_by_name(struct machine *machine, struct map *machine__findnew_module_map(struct machine *machine, u64 start, const char *filename); -int arch__fix_module_text_start(u64 *start, const char *name); +int arch__fix_module_text_start(u64 *start, u64 *size, const char *name); int machine__load_kallsyms(struct machine *machine, const char *filename); -- cgit From b9c0a64901d5bdec6eafd38d1dc8fa0e2974fccb Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Wed, 24 Jul 2019 14:27:03 +0200 Subject: perf annotate: Fix s390 gap between kernel end and module start During execution of command 'perf top' the error message: Not enough memory for annotating '__irf_end' symbol!) is emitted from this call sequence: __cmd_top perf_top__mmap_read perf_top__mmap_read_idx perf_event__process_sample hist_entry_iter__add hist_iter__top_callback perf_top__record_precise_ip hist_entry__inc_addr_samples symbol__inc_addr_samples symbol__get_annotation symbol__alloc_hist In this function the size of symbol __irf_end is calculated. The size of a symbol is the difference between its start and end address. When the symbol was read the first time, its start and end was set to: symbol__new: __irf_end 0xe954d0-0xe954d0 which is correct and maps with /proc/kallsyms: root@s8360046:~/linux-4.15.0/tools/perf# fgrep _irf_end /proc/kallsyms 0000000000e954d0 t __irf_end root@s8360046:~/linux-4.15.0/tools/perf# In function symbol__alloc_hist() the end of symbol __irf_end is symbol__alloc_hist sym:__irf_end start:0xe954d0 end:0x3ff80045a8 which is identical with the first module entry in /proc/kallsyms This results in a symbol size of __irf_req for histogram analyses of 70334140059072 bytes and a malloc() for this requested size fails. The root cause of this is function __dso__load_kallsyms() +-> symbols__fixup_end() Function symbols__fixup_end() enlarges the last symbol in the kallsyms map: # fgrep __irf_end /proc/kallsyms 0000000000e954d0 t __irf_end # to the start address of the first module: # cat /proc/kallsyms | sort | egrep ' [tT] ' .... 0000000000e952d0 T __security_initcall_end 0000000000e954d0 T __initramfs_size 0000000000e954d0 t __irf_end 000003ff800045a8 T fc_get_event_number [scsi_transport_fc] 000003ff800045d0 t store_fc_vport_disable [scsi_transport_fc] 000003ff800046a8 T scsi_is_fc_rport [scsi_transport_fc] 000003ff800046d0 t fc_target_setup [scsi_transport_fc] On s390 the kernel is located around memory address 0x200, 0x10000 or 0x100000, depending on linux version. Modules however start some- where around 0x3ff xxxx xxxx. This is different than x86 and produces a large gap for which histogram allocation fails. Fix this by detecting the kernel's last symbol and do no adjustment for it. Introduce a weak function and handle s390 specifics. Reported-by: Klaus Theurich Signed-off-by: Thomas Richter Acked-by: Heiko Carstens Cc: Hendrik Brueckner Cc: Vasily Gorbik Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20190724122703.3996-2-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/arch/s390/util/machine.c | 17 +++++++++++++++++ tools/perf/util/symbol.c | 7 ++++++- tools/perf/util/symbol.h | 1 + 3 files changed, 24 insertions(+), 1 deletion(-) diff --git a/tools/perf/arch/s390/util/machine.c b/tools/perf/arch/s390/util/machine.c index de26b1441a48..c8c86a0c9b79 100644 --- a/tools/perf/arch/s390/util/machine.c +++ b/tools/perf/arch/s390/util/machine.c @@ -6,6 +6,7 @@ #include "machine.h" #include "api/fs/fs.h" #include "debug.h" +#include "symbol.h" int arch__fix_module_text_start(u64 *start, u64 *size, const char *name) { @@ -33,3 +34,19 @@ int arch__fix_module_text_start(u64 *start, u64 *size, const char *name) return 0; } + +/* On s390 kernel text segment start is located at very low memory addresses, + * for example 0x10000. Modules are located at very high memory addresses, + * for example 0x3ff xxxx xxxx. The gap between end of kernel text segment + * and beginning of first module's text segment is very big. + * Therefore do not fill this gap and do not assign it to the kernel dso map. + */ +void arch__symbols__fixup_end(struct symbol *p, struct symbol *c) +{ + if (strchr(p->name, '[') == NULL && strchr(c->name, '[')) + /* Last kernel symbol mapped to end of page */ + p->end = roundup(p->end, page_size); + else + p->end = c->start; + pr_debug4("%s sym:%s end:%#lx\n", __func__, p->name, p->end); +} diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 173f3378aaa0..4efde7879474 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -92,6 +92,11 @@ static int prefix_underscores_count(const char *str) return tail - str; } +void __weak arch__symbols__fixup_end(struct symbol *p, struct symbol *c) +{ + p->end = c->start; +} + const char * __weak arch__normalize_symbol_name(const char *name) { return name; @@ -218,7 +223,7 @@ void symbols__fixup_end(struct rb_root_cached *symbols) curr = rb_entry(nd, struct symbol, rb_node); if (prev->end == prev->start && prev->end != curr->start) - prev->end = curr->start; + arch__symbols__fixup_end(prev, curr); } /* Last entry */ diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h index 12755b42ea93..183f630cb5f1 100644 --- a/tools/perf/util/symbol.h +++ b/tools/perf/util/symbol.h @@ -288,6 +288,7 @@ const char *arch__normalize_symbol_name(const char *name); #define SYMBOL_A 0 #define SYMBOL_B 1 +void arch__symbols__fixup_end(struct symbol *p, struct symbol *c); int arch__compare_symbol_names(const char *namea, const char *nameb); int arch__compare_symbol_names_n(const char *namea, const char *nameb, unsigned int n); -- cgit From 8e6e5bea2e34c61291d00cb3f47560341aa84bc3 Mon Sep 17 00:00:00 2001 From: Jin Yao Date: Mon, 29 Jul 2019 15:27:55 +0800 Subject: perf pmu-events: Fix missing "cpu_clk_unhalted.core" event The events defined in pmu-events JSON are parsed and added into perf tool. For fixed counters, we handle the encodings between JSON and perf by using a static array fixed[]. But the fixed[] has missed an important event "cpu_clk_unhalted.core". For example, on the Tremont platform, [root@localhost ~]# perf stat -e cpu_clk_unhalted.core -a event syntax error: 'cpu_clk_unhalted.core' \___ parser error With this patch, the event cpu_clk_unhalted.core can be parsed. [root@localhost perf]# ./perf stat -e cpu_clk_unhalted.core -a -vvv ------------------------------------------------------------ perf_event_attr: type 4 size 112 config 0x3c sample_type IDENTIFIER read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING disabled 1 inherit 1 exclude_guest 1 ------------------------------------------------------------ ... Signed-off-by: Jin Yao Cc: Alexander Shishkin Cc: Andi Kleen Cc: Jin Yao Cc: Jiri Olsa Cc: Kan Liang Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20190729072755.2166-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/pmu-events/jevents.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/pmu-events/jevents.c b/tools/perf/pmu-events/jevents.c index 1a91a197cafb..d413761621b0 100644 --- a/tools/perf/pmu-events/jevents.c +++ b/tools/perf/pmu-events/jevents.c @@ -453,6 +453,7 @@ static struct fixed { { "inst_retired.any_p", "event=0xc0" }, { "cpu_clk_unhalted.ref", "event=0x0,umask=0x03" }, { "cpu_clk_unhalted.thread", "event=0x3c" }, + { "cpu_clk_unhalted.core", "event=0x3c" }, { "cpu_clk_unhalted.thread_any", "event=0x3c,any=1" }, { NULL, NULL}, }; -- cgit From 94ed3fde38c7c1347cd82b945553905cfd992ab9 Mon Sep 17 00:00:00 2001 From: Atish Patra Date: Fri, 2 Aug 2019 21:27:23 -0700 Subject: dt-bindings: Update the riscv,isa string description Since the RISC-V specification states that ISA description strings are case-insensitive, there's no functional difference between mixed-case, upper-case, and lower-case ISA strings. Thus, to simplify parsing, specify that the letters present in "riscv,isa" must be all lowercase. Suggested-by: Paul Walmsley Signed-off-by: Atish Patra Signed-off-by: Paul Walmsley --- Documentation/devicetree/bindings/riscv/cpus.yaml | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index c899111aa5e3..9d3fe6aada2b 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -50,6 +50,10 @@ properties: User-Level ISA document, available from https://riscv.org/specifications/ + While the isa strings in ISA specification are case + insensitive, letters in the riscv,isa string must be all + lowercase to simplify parsing. + timebase-frequency: type: integer minimum: 1 -- cgit From 66cc016ab7c780d53450fd1648010da02ddf2770 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 6 Aug 2019 18:28:33 -0700 Subject: riscv: delay: use do_div() instead of __udivdi3() In preparation for removing __udivdi3() from the RISC-V architecture-specific files, convert its one user to use do_div(). This avoids breaking the RV32 build after __udivdi3() is removed. This second version removes the assignment of the remainder to an unused temporary variable. Thanks to Nicolas Pitre for the suggestion. Signed-off-by: Paul Walmsley Cc: Nicolas Pitre --- arch/riscv/lib/delay.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/riscv/lib/delay.c b/arch/riscv/lib/delay.c index 87ff89e88f2c..f51c9a03bca1 100644 --- a/arch/riscv/lib/delay.c +++ b/arch/riscv/lib/delay.c @@ -81,9 +81,13 @@ EXPORT_SYMBOL(__delay); void udelay(unsigned long usecs) { u64 ucycles = (u64)usecs * lpj_fine * UDELAY_MULT; + u64 n; if (unlikely(usecs > MAX_UDELAY_US)) { - __delay((u64)usecs * riscv_timebase / 1000000ULL); + n = (u64)usecs * riscv_timebase; + do_div(n, 1000000); + + __delay(n); return; } -- cgit From 81a48ee417387bef9cb720ca75980ee11ae9c901 Mon Sep 17 00:00:00 2001 From: Palmer Dabbelt Date: Tue, 6 Aug 2019 17:05:08 -0700 Subject: RISC-V: Remove udivdi3 This should never have landed in the first place: it was added as part of 64-bit divide support for 32-bit systems, but the kernel doesn't allow this sort of division. I must have forgotten to remove it. This patch removes the support. Since this routine only worked on 64-bit platforms but was only built on 32-bit platforms, it's essentially just nonsense anyway. Signed-off-by: Palmer Dabbelt Acked-by: Nicolas Pitre Link: https://lore.kernel.org/linux-riscv/nycvar.YSQ.7.76.1908061413360.19480@knanqh.ubzr/T/#t Reported-by: Eric Lin Signed-off-by: Paul Walmsley --- arch/riscv/lib/Makefile | 2 -- arch/riscv/lib/udivdi3.S | 32 -------------------------------- 2 files changed, 34 deletions(-) delete mode 100644 arch/riscv/lib/udivdi3.S diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile index 8e364ebf37de..267feaa10f6a 100644 --- a/arch/riscv/lib/Makefile +++ b/arch/riscv/lib/Makefile @@ -5,5 +5,3 @@ lib-y += memset.o lib-y += uaccess.o lib-$(CONFIG_64BIT) += tishift.o - -lib-$(CONFIG_32BIT) += udivdi3.o diff --git a/arch/riscv/lib/udivdi3.S b/arch/riscv/lib/udivdi3.S deleted file mode 100644 index 3f07476a91a9..000000000000 --- a/arch/riscv/lib/udivdi3.S +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2016-2017 Free Software Foundation, Inc. - */ - -#include - -ENTRY(__udivdi3) - mv a2, a1 - mv a1, a0 - li a0, -1 - beqz a2, .L5 - li a3, 1 - bgeu a2, a1, .L2 -.L1: - blez a2, .L2 - slli a2, a2, 1 - slli a3, a3, 1 - bgtu a1, a2, .L1 -.L2: - li a0, 0 -.L3: - bltu a1, a2, .L4 - sub a1, a1, a2 - or a0, a0, a3 -.L4: - srli a3, a3, 1 - srli a2, a2, 1 - bnez a3, .L3 -.L5: - ret -ENDPROC(__udivdi3) -- cgit From 8e5e72e3314021a3d166c1d19a991a0870568856 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 8 Aug 2019 14:46:58 -0700 Subject: dt-bindings: riscv: remove obsolete cpus.txt Remove the now-obsolete riscv/cpus.txt DT binding document, since we are using YAML binding documentation instead. While doing so, transfer the explanatory text about 'harts' (with some edits) into the YAML file, at Rob's request. Link: https://lore.kernel.org/linux-riscv/CAL_JsqJs6MtvmuyAknsUxQymbmoV=G+=JfS1PQj9kNHV7fjC9g@mail.gmail.com/ Signed-off-by: Paul Walmsley Cc: Rob Herring Reviewed-by: Rob Herring --- Documentation/devicetree/bindings/riscv/cpus.txt | 162 ---------------------- Documentation/devicetree/bindings/riscv/cpus.yaml | 12 ++ 2 files changed, 12 insertions(+), 162 deletions(-) delete mode 100644 Documentation/devicetree/bindings/riscv/cpus.txt diff --git a/Documentation/devicetree/bindings/riscv/cpus.txt b/Documentation/devicetree/bindings/riscv/cpus.txt deleted file mode 100644 index adf7b7af5dc3..000000000000 --- a/Documentation/devicetree/bindings/riscv/cpus.txt +++ /dev/null @@ -1,162 +0,0 @@ -=================== -RISC-V CPU Bindings -=================== - -The device tree allows to describe the layout of CPUs in a system through -the "cpus" node, which in turn contains a number of subnodes (ie "cpu") -defining properties for every cpu. - -Bindings for CPU nodes follow the Devicetree Specification, available from: - -https://www.devicetree.org/specifications/ - -with updates for 32-bit and 64-bit RISC-V systems provided in this document. - -=========== -Terminology -=========== - -This document uses some terminology common to the RISC-V community that is not -widely used, the definitions of which are listed here: - -* hart: A hardware execution context, which contains all the state mandated by - the RISC-V ISA: a PC and some registers. This terminology is designed to - disambiguate software's view of execution contexts from any particular - microarchitectural implementation strategy. For example, my Intel laptop is - described as having one socket with two cores, each of which has two hyper - threads. Therefore this system has four harts. - -===================================== -cpus and cpu node bindings definition -===================================== - -The RISC-V architecture, in accordance with the Devicetree Specification, -requires the cpus and cpu nodes to be present and contain the properties -described below. - -- cpus node - - Description: Container of cpu nodes - - The node name must be "cpus". - - A cpus node must define the following properties: - - - #address-cells - Usage: required - Value type: - Definition: must be set to 1 - - #size-cells - Usage: required - Value type: - Definition: must be set to 0 - -- cpu node - - Description: Describes a hart context - - PROPERTIES - - - device_type - Usage: required - Value type: - Definition: must be "cpu" - - reg - Usage: required - Value type: - Definition: The hart ID of this CPU node - - compatible: - Usage: required - Value type: - Definition: must contain "riscv", may contain one of - "sifive,rocket0" - - mmu-type: - Usage: optional - Value type: - Definition: Specifies the CPU's MMU type. Possible values are - "riscv,sv32" - "riscv,sv39" - "riscv,sv48" - - riscv,isa: - Usage: required - Value type: - Definition: Contains the RISC-V ISA string of this hart. These - ISA strings are defined by the RISC-V ISA manual. - -Example: SiFive Freedom U540G Development Kit ---------------------------------------------- - -This system contains two harts: a hart marked as disabled that's used for -low-level system tasks and should be ignored by Linux, and a second hart that -Linux is allowed to run on. - - cpus { - #address-cells = <1>; - #size-cells = <0>; - timebase-frequency = <1000000>; - cpu@0 { - clock-frequency = <1600000000>; - compatible = "sifive,rocket0", "riscv"; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <128>; - i-cache-size = <16384>; - next-level-cache = <&L15 &L0>; - reg = <0>; - riscv,isa = "rv64imac"; - status = "disabled"; - L10: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - cpu@1 { - clock-frequency = <1600000000>; - compatible = "sifive,rocket0", "riscv"; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <32>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <32>; - mmu-type = "riscv,sv39"; - next-level-cache = <&L15 &L0>; - reg = <1>; - riscv,isa = "rv64imafdc"; - status = "okay"; - tlb-split; - L13: interrupt-controller { - #interrupt-cells = <1>; - compatible = "riscv,cpu-intc"; - interrupt-controller; - }; - }; - }; - -Example: Spike ISA Simulator with 1 Hart ----------------------------------------- - -This device tree matches the Spike ISA golden model as run with `spike -p1`. - - cpus { - cpu@0 { - device_type = "cpu"; - reg = <0x00000000>; - status = "okay"; - compatible = "riscv"; - riscv,isa = "rv64imafdc"; - mmu-type = "riscv,sv48"; - clock-frequency = <0x3b9aca00>; - interrupt-controller { - #interrupt-cells = <0x00000001>; - interrupt-controller; - compatible = "riscv,cpu-intc"; - } - } - } diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 9d3fe6aada2b..b261a3015f84 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -10,6 +10,18 @@ maintainers: - Paul Walmsley - Palmer Dabbelt +description: | + This document uses some terminology common to the RISC-V community + that is not widely used, the definitions of which are listed here: + + hart: A hardware execution context, which contains all the state + mandated by the RISC-V ISA: a PC and some registers. This + terminology is designed to disambiguate software's view of execution + contexts from any particular microarchitectural implementation + strategy. For example, an Intel laptop containing one socket with + two cores, each of which has two hyperthreads, could be described as + having four harts. + properties: compatible: items: -- cgit From b390e0bfd2996f1215231395f4e25a4c011eeaf9 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 8 Aug 2019 15:36:44 -0700 Subject: dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board The YAML binding document for SiFive boards has an incorrect compatible string for the HiFive Unleashed board. Change it to match the name of the board on the SiFive web site: https://www.sifive.com/boards/hifive-unleashed which also matches the contents of the board DT data file: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts#n13 Signed-off-by: Paul Walmsley Acked-by: Rob Herring --- Documentation/devicetree/bindings/riscv/sifive.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/riscv/sifive.yaml b/Documentation/devicetree/bindings/riscv/sifive.yaml index 9d17dc2f3f84..3ab532713dc1 100644 --- a/Documentation/devicetree/bindings/riscv/sifive.yaml +++ b/Documentation/devicetree/bindings/riscv/sifive.yaml @@ -19,7 +19,7 @@ properties: compatible: items: - enum: - - sifive,freedom-unleashed-a00 + - sifive,hifive-unleashed-a00 - const: sifive,fu540-c000 - const: sifive,fu540 ... -- cgit From 03fdfb2690099c19160a3f2c5b77db60b3afeded Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Mon, 5 Aug 2019 10:34:51 +0100 Subject: KVM: arm64: Don't write junk to sysregs on reset At the moment, the way we reset system registers is mildly insane: We write junk to them, call the reset functions, and then check that we have something else in them. The "fun" thing is that this can happen while the guest is running (PSCI, for example). If anything in KVM has to evaluate the state of a system register while junk is in there, bad thing may happen. Let's stop doing that. Instead, we track that we have called a reset function for that register, and assume that the reset function has done something. This requires fixing a couple of sysreg refinition in the trap table. In the end, the very need of this reset check is pretty dubious, as it doesn't check everything (a lot of the sysregs leave outside of the sys_regs[] array). It may well be axed in the near future. Tested-by: Zenghui Yu Signed-off-by: Marc Zyngier --- arch/arm64/kvm/sys_regs.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index f26e181d881c..2071260a275b 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -632,7 +632,7 @@ static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) */ val = ((pmcr & ~ARMV8_PMU_PMCR_MASK) | (ARMV8_PMU_PMCR_MASK & 0xdecafbad)) & (~ARMV8_PMU_PMCR_E); - __vcpu_sys_reg(vcpu, PMCR_EL0) = val; + __vcpu_sys_reg(vcpu, r->reg) = val; } static bool check_pmu_access_disabled(struct kvm_vcpu *vcpu, u64 flags) @@ -981,13 +981,13 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */ #define DBG_BCR_BVR_WCR_WVR_EL1(n) \ { SYS_DESC(SYS_DBGBVRn_EL1(n)), \ - trap_bvr, reset_bvr, n, 0, get_bvr, set_bvr }, \ + trap_bvr, reset_bvr, 0, 0, get_bvr, set_bvr }, \ { SYS_DESC(SYS_DBGBCRn_EL1(n)), \ - trap_bcr, reset_bcr, n, 0, get_bcr, set_bcr }, \ + trap_bcr, reset_bcr, 0, 0, get_bcr, set_bcr }, \ { SYS_DESC(SYS_DBGWVRn_EL1(n)), \ - trap_wvr, reset_wvr, n, 0, get_wvr, set_wvr }, \ + trap_wvr, reset_wvr, 0, 0, get_wvr, set_wvr }, \ { SYS_DESC(SYS_DBGWCRn_EL1(n)), \ - trap_wcr, reset_wcr, n, 0, get_wcr, set_wcr } + trap_wcr, reset_wcr, 0, 0, get_wcr, set_wcr } /* Macro to expand the PMEVCNTRn_EL0 register */ #define PMU_PMEVCNTR_EL0(n) \ @@ -1540,7 +1540,7 @@ static const struct sys_reg_desc sys_reg_descs[] = { { SYS_DESC(SYS_CSSELR_EL1), access_csselr, reset_unknown, CSSELR_EL1 }, { SYS_DESC(SYS_CTR_EL0), access_ctr }, - { SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, }, + { SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, PMCR_EL0 }, { SYS_DESC(SYS_PMCNTENSET_EL0), access_pmcnten, reset_unknown, PMCNTENSET_EL0 }, { SYS_DESC(SYS_PMCNTENCLR_EL0), access_pmcnten, NULL, PMCNTENSET_EL0 }, { SYS_DESC(SYS_PMOVSCLR_EL0), access_pmovs, NULL, PMOVSSET_EL0 }, @@ -2254,13 +2254,19 @@ static int emulate_sys_reg(struct kvm_vcpu *vcpu, } static void reset_sys_reg_descs(struct kvm_vcpu *vcpu, - const struct sys_reg_desc *table, size_t num) + const struct sys_reg_desc *table, size_t num, + unsigned long *bmap) { unsigned long i; for (i = 0; i < num; i++) - if (table[i].reset) + if (table[i].reset) { + int reg = table[i].reg; + table[i].reset(vcpu, &table[i]); + if (reg > 0 && reg < NR_SYS_REGS) + set_bit(reg, bmap); + } } /** @@ -2774,18 +2780,16 @@ void kvm_reset_sys_regs(struct kvm_vcpu *vcpu) { size_t num; const struct sys_reg_desc *table; - - /* Catch someone adding a register without putting in reset entry. */ - memset(&vcpu->arch.ctxt.sys_regs, 0x42, sizeof(vcpu->arch.ctxt.sys_regs)); + DECLARE_BITMAP(bmap, NR_SYS_REGS) = { 0, }; /* Generic chip reset first (so target could override). */ - reset_sys_reg_descs(vcpu, sys_reg_descs, ARRAY_SIZE(sys_reg_descs)); + reset_sys_reg_descs(vcpu, sys_reg_descs, ARRAY_SIZE(sys_reg_descs), bmap); table = get_target_table(vcpu->arch.target, true, &num); - reset_sys_reg_descs(vcpu, table, num); + reset_sys_reg_descs(vcpu, table, num, bmap); for (num = 1; num < NR_SYS_REGS; num++) { - if (WARN(__vcpu_sys_reg(vcpu, num) == 0x4242424242424242, + if (WARN(!test_bit(num, bmap), "Didn't reset __vcpu_sys_reg(%zi)\n", num)) break; } -- cgit From c69509c70aa45a8c4954c88c629a64acf4ee4a36 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Mon, 5 Aug 2019 10:34:51 +0100 Subject: KVM: arm: Don't write junk to CP15 registers on reset At the moment, the way we reset CP15 registers is mildly insane: We write junk to them, call the reset functions, and then check that we have something else in them. The "fun" thing is that this can happen while the guest is running (PSCI, for example). If anything in KVM has to evaluate the state of a CP15 register while junk is in there, bad thing may happen. Let's stop doing that. Instead, we track that we have called a reset function for that register, and assume that the reset function has done something. In the end, the very need of this reset check is pretty dubious, as it doesn't check everything (a lot of the CP15 reg leave outside of the cp15_regs[] array). It may well be axed in the near future. Signed-off-by: Marc Zyngier --- arch/arm/kvm/coproc.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index d2806bcff8bb..07745ee022a1 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -651,13 +651,22 @@ int kvm_handle_cp14_64(struct kvm_vcpu *vcpu, struct kvm_run *run) } static void reset_coproc_regs(struct kvm_vcpu *vcpu, - const struct coproc_reg *table, size_t num) + const struct coproc_reg *table, size_t num, + unsigned long *bmap) { unsigned long i; for (i = 0; i < num; i++) - if (table[i].reset) + if (table[i].reset) { + int reg = table[i].reg; + table[i].reset(vcpu, &table[i]); + if (reg > 0 && reg < NR_CP15_REGS) { + set_bit(reg, bmap); + if (table[i].is_64bit) + set_bit(reg + 1, bmap); + } + } } static struct coproc_params decode_32bit_hsr(struct kvm_vcpu *vcpu) @@ -1432,17 +1441,15 @@ void kvm_reset_coprocs(struct kvm_vcpu *vcpu) { size_t num; const struct coproc_reg *table; - - /* Catch someone adding a register without putting in reset entry. */ - memset(vcpu->arch.ctxt.cp15, 0x42, sizeof(vcpu->arch.ctxt.cp15)); + DECLARE_BITMAP(bmap, NR_CP15_REGS) = { 0, }; /* Generic chip reset first (so target could override). */ - reset_coproc_regs(vcpu, cp15_regs, ARRAY_SIZE(cp15_regs)); + reset_coproc_regs(vcpu, cp15_regs, ARRAY_SIZE(cp15_regs), bmap); table = get_target_table(vcpu->arch.target, &num); - reset_coproc_regs(vcpu, table, num); + reset_coproc_regs(vcpu, table, num, bmap); for (num = 1; num < NR_CP15_REGS; num++) - WARN(vcpu_cp15(vcpu, num) == 0x42424242, + WARN(!test_bit(num, bmap), "Didn't reset vcpu_cp15(vcpu, %zi)", num); } -- cgit From 16e604a437c89751dc626c9e90cf88ba93c5be64 Mon Sep 17 00:00:00 2001 From: Alexandru Elisei Date: Wed, 7 Aug 2019 10:53:20 +0100 Subject: KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable A HW mapped level sensitive interrupt asserted by a device will not be put into the ap_list if it is disabled at the VGIC level. When it is enabled again, it will be inserted into the ap_list and written to a list register on guest entry regardless of the state of the device. We could argue that this can also happen on real hardware, when the command to enable the interrupt reached the GIC before the device had the chance to de-assert the interrupt signal; however, we emulate the distributor and redistributors in software and we can do better than that. Signed-off-by: Alexandru Elisei Signed-off-by: Marc Zyngier --- virt/kvm/arm/vgic/vgic-mmio.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/virt/kvm/arm/vgic/vgic-mmio.c b/virt/kvm/arm/vgic/vgic-mmio.c index 3ba7278fb533..44efc2ff863f 100644 --- a/virt/kvm/arm/vgic/vgic-mmio.c +++ b/virt/kvm/arm/vgic/vgic-mmio.c @@ -113,6 +113,22 @@ void vgic_mmio_write_senable(struct kvm_vcpu *vcpu, struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i); raw_spin_lock_irqsave(&irq->irq_lock, flags); + if (vgic_irq_is_mapped_level(irq)) { + bool was_high = irq->line_level; + + /* + * We need to update the state of the interrupt because + * the guest might have changed the state of the device + * while the interrupt was disabled at the VGIC level. + */ + irq->line_level = vgic_get_phys_line_level(irq); + /* + * Deactivate the physical interrupt so the GIC will let + * us know when it is asserted again. + */ + if (!irq->active && was_high && !irq->line_level) + vgic_irq_set_phys_active(irq, false); + } irq->enabled = true; vgic_queue_irq_unlock(vcpu->kvm, irq, flags); -- cgit From 404861e15b5fa7edbab22400f9174c1a21fde731 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 7 Aug 2019 14:31:59 +0200 Subject: s390/vdso: map vdso also for statically linked binaries s390 does not map the vdso for statically linked binaries, assuming that this doesn't make sense. See commit fc5243d98ac2 ("[S390] arch_setup_additional_pages arguments"). However with glibc commit d665367f596d ("linux: Enable vDSO for static linking as default (BZ#19767)") and commit 5e855c895401 ("s390: Enable VDSO for static linking") the vdso is also used for statically linked binaries - if the kernel would make it available. Therefore map the vdso always, just like all other architectures. Reported-by: Stefan Liebler Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik --- arch/s390/kernel/vdso.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c index 243d8b1185bf..c6bc190f3c28 100644 --- a/arch/s390/kernel/vdso.c +++ b/arch/s390/kernel/vdso.c @@ -216,11 +216,6 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) if (!vdso_enabled) return 0; - /* - * Only map the vdso for dynamically linked elf binaries. - */ - if (!uses_interp) - return 0; vdso_pages = vdso64_pages; #ifdef CONFIG_COMPAT_VDSO -- cgit From 20621fedb2a696e4dc60bc1c5de37cf21976abcb Mon Sep 17 00:00:00 2001 From: Coly Li Date: Fri, 9 Aug 2019 14:14:05 +0800 Subject: bcache: Revert "bcache: use sysfs_match_string() instead of __sysfs_match_string()" This reverts commit 89e0341af082dbc170019f908846f4a424efc86b. In drivers/md/bcache/sysfs.c:bch_snprint_string_list(), NULL pointer at the end of list is necessary. Remove the NULL from last element of each lists will cause the following panic, [ 4340.455652] bcache: register_cache() registered cache device nvme0n1 [ 4340.464603] bcache: register_bdev() registered backing device sdk [ 4421.587335] bcache: bch_cached_dev_run() cached dev sdk is running already [ 4421.587348] bcache: bch_cached_dev_attach() Caching sdk as bcache0 on set 354e1d46-d99f-4d8b-870b-078b80dc88a6 [ 5139.247950] general protection fault: 0000 [#1] SMP NOPTI [ 5139.247970] CPU: 9 PID: 5896 Comm: cat Not tainted 4.12.14-95.29-default #1 SLE12-SP4 [ 5139.247988] Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 04/18/2019 [ 5139.248006] task: ffff888fb25c0b00 task.stack: ffff9bbacc704000 [ 5139.248021] RIP: 0010:string+0x21/0x70 [ 5139.248030] RSP: 0018:ffff9bbacc707bf0 EFLAGS: 00010286 [ 5139.248043] RAX: ffffffffa7e432e3 RBX: ffff8881c20da02a RCX: ffff0a00ffffff04 [ 5139.248058] RDX: 3f00656863616362 RSI: ffff8881c20db000 RDI: ffffffffffffffff [ 5139.248075] RBP: ffff8881c20db000 R08: 0000000000000000 R09: ffff8881c20da02a [ 5139.248090] R10: 0000000000000004 R11: 0000000000000000 R12: ffff9bbacc707c48 [ 5139.248104] R13: 0000000000000fd6 R14: ffffffffc0665855 R15: ffffffffc0665855 [ 5139.248119] FS: 00007faf253b8700(0000) GS:ffff88903f840000(0000) knlGS:0000000000000000 [ 5139.248137] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5139.248149] CR2: 00007faf25395008 CR3: 0000000f72150006 CR4: 00000000007606e0 [ 5139.248164] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5139.248179] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5139.248193] PKRU: 55555554 [ 5139.248200] Call Trace: [ 5139.248210] vsnprintf+0x1fb/0x510 [ 5139.248221] snprintf+0x39/0x40 [ 5139.248238] bch_snprint_string_list.constprop.15+0x5b/0x90 [bcache] [ 5139.248256] __bch_cached_dev_show+0x44d/0x5f0 [bcache] [ 5139.248270] ? __alloc_pages_nodemask+0xb2/0x210 [ 5139.248284] bch_cached_dev_show+0x2c/0x50 [bcache] [ 5139.248297] sysfs_kf_seq_show+0xbb/0x190 [ 5139.248308] seq_read+0xfc/0x3c0 [ 5139.248317] __vfs_read+0x26/0x140 [ 5139.248327] vfs_read+0x87/0x130 [ 5139.248336] SyS_read+0x42/0x90 [ 5139.248346] do_syscall_64+0x74/0x160 [ 5139.248358] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 5139.248370] RIP: 0033:0x7faf24eea370 [ 5139.248379] RSP: 002b:00007fff82d03f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 5139.248395] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007faf24eea370 [ 5139.248411] RDX: 0000000000020000 RSI: 00007faf25396000 RDI: 0000000000000003 [ 5139.248426] RBP: 00007faf25396000 R08: 00000000ffffffff R09: 0000000000000000 [ 5139.248441] R10: 000000007c9d4d41 R11: 0000000000000246 R12: 00007faf25396000 [ 5139.248456] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000fff [ 5139.248892] Code: ff ff ff 0f 1f 80 00 00 00 00 49 89 f9 48 89 cf 48 c7 c0 e3 32 e4 a7 48 c1 ff 30 48 81 fa ff 0f 00 00 48 0f 46 d0 48 85 ff 74 45 <44> 0f b6 02 48 8d 42 01 45 84 c0 74 38 48 01 fa 4c 89 cf eb 0e The simplest way to fix is to revert commit 89e0341af082 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()"). This bug was introduced in Linux v5.2, so this fix only applies to Linux v5.2 is enough for stable tree maintainer. Fixes: 89e0341af082 ("bcache: use sysfs_match_string() instead of __sysfs_match_string()") Cc: stable@vger.kernel.org Cc: Alexandru Ardelean Reported-by: Peifeng Lin Acked-by: Alexandru Ardelean Signed-off-by: Coly Li Signed-off-by: Jens Axboe --- drivers/md/bcache/sysfs.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c index 9f0826712845..e2059af90791 100644 --- a/drivers/md/bcache/sysfs.c +++ b/drivers/md/bcache/sysfs.c @@ -23,24 +23,28 @@ static const char * const bch_cache_modes[] = { "writethrough", "writeback", "writearound", - "none" + "none", + NULL }; /* Default is 0 ("auto") */ static const char * const bch_stop_on_failure_modes[] = { "auto", - "always" + "always", + NULL }; static const char * const cache_replacement_policies[] = { "lru", "fifo", - "random" + "random", + NULL }; static const char * const error_actions[] = { "unregister", - "panic" + "panic", + NULL }; write_attribute(attach); @@ -338,7 +342,7 @@ STORE(__cached_dev) } if (attr == &sysfs_cache_mode) { - v = sysfs_match_string(bch_cache_modes, buf); + v = __sysfs_match_string(bch_cache_modes, -1, buf); if (v < 0) return v; @@ -349,7 +353,7 @@ STORE(__cached_dev) } if (attr == &sysfs_stop_when_cache_set_failed) { - v = sysfs_match_string(bch_stop_on_failure_modes, buf); + v = __sysfs_match_string(bch_stop_on_failure_modes, -1, buf); if (v < 0) return v; @@ -816,7 +820,7 @@ STORE(__bch_cache_set) 0, UINT_MAX); if (attr == &sysfs_errors) { - v = sysfs_match_string(error_actions, buf); + v = __sysfs_match_string(error_actions, -1, buf); if (v < 0) return v; @@ -1088,7 +1092,7 @@ STORE(__bch_cache) } if (attr == &sysfs_cache_replacement_policy) { - v = sysfs_match_string(cache_replacement_policies, buf); + v = __sysfs_match_string(cache_replacement_policies, -1, buf); if (v < 0) return v; -- cgit From 6a7553e8d84d5322d883cb83bb9888c49a0f04e0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 9 Aug 2019 15:46:40 +0200 Subject: MAINTAINERS: handle fbdev changes through drm-misc tree fbdev patches will now go to upstream through drm-misc tree (IOW starting with v5.4 merge window fbdev changes will be included in DRM pull request) for improved maintainership and better integration testing. Update MAINTAINERS file accordingly. Acked-by: Daniel Vetter Signed-off-by: Bartlomiej Zolnierkiewicz --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index a2c343ee3b2c..38963aead319 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6377,7 +6377,7 @@ FRAMEBUFFER LAYER M: Bartlomiej Zolnierkiewicz L: dri-devel@lists.freedesktop.org L: linux-fbdev@vger.kernel.org -T: git git://github.com/bzolnier/linux.git +T: git git://anongit.freedesktop.org/drm/drm-misc Q: http://patchwork.kernel.org/project/linux-fbdev/list/ S: Maintained F: Documentation/fb/ -- cgit From 8f946da73aaa1c3f609bd14d1193f39afa6830c7 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Mon, 5 Aug 2019 11:11:08 +0200 Subject: kvm: remove unnecessary PageReserved check The same check is already done in kvm_is_reserved_pfn. Reviewed-by: Sean Christopherson Signed-off-by: Paolo Bonzini --- virt/kvm/kvm_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 4feceaa03fb1..c6a91b044d8d 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -1855,8 +1855,7 @@ void kvm_set_pfn_dirty(kvm_pfn_t pfn) if (!kvm_is_reserved_pfn(pfn)) { struct page *page = pfn_to_page(pfn); - if (!PageReserved(page)) - SetPageDirty(page); + SetPageDirty(page); } } EXPORT_SYMBOL_GPL(kvm_set_pfn_dirty); -- cgit From e2c26537ea7652d123ddb01ceb1aa0e2a5edb7ad Mon Sep 17 00:00:00 2001 From: Thomas Huth Date: Wed, 31 Jul 2019 16:28:51 +0200 Subject: KVM: selftests: Update gitignore file for latest changes The kvm_create_max_vcpus test has been moved to the main directory, and sync_regs_test is now available on s390x, too. Signed-off-by: Thomas Huth Acked-by: Shuah Khan Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/.gitignore | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/.gitignore b/tools/testing/selftests/kvm/.gitignore index 41266af0d3dc..b35da375530a 100644 --- a/tools/testing/selftests/kvm/.gitignore +++ b/tools/testing/selftests/kvm/.gitignore @@ -1,7 +1,7 @@ +/s390x/sync_regs_test /x86_64/cr4_cpuid_sync_test /x86_64/evmcs_test /x86_64/hyperv_cpuid -/x86_64/kvm_create_max_vcpus /x86_64/mmio_warning_test /x86_64/platform_info_test /x86_64/set_sregs_test @@ -13,3 +13,4 @@ /x86_64/vmx_tsc_adjust_test /clear_dirty_log_test /dirty_log_test +/kvm_create_max_vcpus -- cgit From c096397c78f766db972f923433031f2dec01cae0 Mon Sep 17 00:00:00 2001 From: Naresh Kamboju Date: Wed, 7 Aug 2019 13:58:14 +0000 Subject: selftests: kvm: Adding config fragments selftests kvm test cases need pre-required kernel configs for the test to get pass. Signed-off-by: Naresh Kamboju Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/config | 3 +++ 1 file changed, 3 insertions(+) create mode 100644 tools/testing/selftests/kvm/config diff --git a/tools/testing/selftests/kvm/config b/tools/testing/selftests/kvm/config new file mode 100644 index 000000000000..63ed533f73d6 --- /dev/null +++ b/tools/testing/selftests/kvm/config @@ -0,0 +1,3 @@ +CONFIG_KVM=y +CONFIG_KVM_INTEL=y +CONFIG_KVM_AMD=y -- cgit From a27a0c9b6a208722016c8ec5ad31ec96082b91ec Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Mon, 5 Aug 2019 12:22:03 +0100 Subject: gfs2: gfs2_walk_metadata fix It turns out that the current version of gfs2_metadata_walker suffers from multiple problems that can cause gfs2_hole_size to report an incorrect size. This will confuse fiemap as well as lseek with the SEEK_DATA flag. Fix that by changing gfs2_hole_walker to compute the metapath to the first data block after the hole (if any), and compute the hole size based on that. Fixes xfstest generic/490. Signed-off-by: Andreas Gruenbacher Reviewed-by: Bob Peterson Cc: stable@vger.kernel.org # v4.18+ --- fs/gfs2/bmap.c | 164 +++++++++++++++++++++++++++++++++++---------------------- 1 file changed, 101 insertions(+), 63 deletions(-) diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c index 4df26ef2b2b1..4f8b5fd6c81f 100644 --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -390,6 +390,19 @@ static int fillup_metapath(struct gfs2_inode *ip, struct metapath *mp, int h) return mp->mp_aheight - x - 1; } +static sector_t metapath_to_block(struct gfs2_sbd *sdp, struct metapath *mp) +{ + sector_t factor = 1, block = 0; + int hgt; + + for (hgt = mp->mp_fheight - 1; hgt >= 0; hgt--) { + if (hgt < mp->mp_aheight) + block += mp->mp_list[hgt] * factor; + factor *= sdp->sd_inptrs; + } + return block; +} + static void release_metapath(struct metapath *mp) { int i; @@ -430,60 +443,84 @@ static inline unsigned int gfs2_extent_length(struct buffer_head *bh, __be64 *pt return ptr - first; } -typedef const __be64 *(*gfs2_metadata_walker)( - struct metapath *mp, - const __be64 *start, const __be64 *end, - u64 factor, void *data); +enum walker_status { WALK_STOP, WALK_FOLLOW, WALK_CONTINUE }; -#define WALK_STOP ((__be64 *)0) -#define WALK_NEXT ((__be64 *)1) +/* + * gfs2_metadata_walker - walk an indirect block + * @mp: Metapath to indirect block + * @ptrs: Number of pointers to look at + * + * When returning WALK_FOLLOW, the walker must update @mp to point at the right + * indirect block to follow. + */ +typedef enum walker_status (*gfs2_metadata_walker)(struct metapath *mp, + unsigned int ptrs); -static int gfs2_walk_metadata(struct inode *inode, sector_t lblock, - u64 len, struct metapath *mp, gfs2_metadata_walker walker, - void *data) +/* + * gfs2_walk_metadata - walk a tree of indirect blocks + * @inode: The inode + * @mp: Starting point of walk + * @max_len: Maximum number of blocks to walk + * @walker: Called during the walk + * + * Returns 1 if the walk was stopped by @walker, 0 if we went past @max_len or + * past the end of metadata, and a negative error code otherwise. + */ + +static int gfs2_walk_metadata(struct inode *inode, struct metapath *mp, + u64 max_len, gfs2_metadata_walker walker) { - struct metapath clone; struct gfs2_inode *ip = GFS2_I(inode); struct gfs2_sbd *sdp = GFS2_SB(inode); - const __be64 *start, *end, *ptr; u64 factor = 1; unsigned int hgt; - int ret = 0; + int ret; - for (hgt = ip->i_height - 1; hgt >= mp->mp_aheight; hgt--) + /* + * The walk starts in the lowest allocated indirect block, which may be + * before the position indicated by @mp. Adjust @max_len accordingly + * to avoid a short walk. + */ + for (hgt = mp->mp_fheight - 1; hgt >= mp->mp_aheight; hgt--) { + max_len += mp->mp_list[hgt] * factor; + mp->mp_list[hgt] = 0; factor *= sdp->sd_inptrs; + } for (;;) { - u64 step; + u16 start = mp->mp_list[hgt]; + enum walker_status status; + unsigned int ptrs; + u64 len; /* Walk indirect block. */ - start = metapointer(hgt, mp); - end = metaend(hgt, mp); - - step = (end - start) * factor; - if (step > len) - end = start + DIV_ROUND_UP_ULL(len, factor); - - ptr = walker(mp, start, end, factor, data); - if (ptr == WALK_STOP) + ptrs = (hgt >= 1 ? sdp->sd_inptrs : sdp->sd_diptrs) - start; + len = ptrs * factor; + if (len > max_len) + ptrs = DIV_ROUND_UP_ULL(max_len, factor); + status = walker(mp, ptrs); + switch (status) { + case WALK_STOP: + return 1; + case WALK_FOLLOW: + BUG_ON(mp->mp_aheight == mp->mp_fheight); + ptrs = mp->mp_list[hgt] - start; + len = ptrs * factor; break; - if (step >= len) + case WALK_CONTINUE: break; - len -= step; - if (ptr != WALK_NEXT) { - BUG_ON(!*ptr); - mp->mp_list[hgt] += ptr - start; - goto fill_up_metapath; } + if (len >= max_len) + break; + max_len -= len; + if (status == WALK_FOLLOW) + goto fill_up_metapath; lower_metapath: /* Decrease height of metapath. */ - if (mp != &clone) { - clone_metapath(&clone, mp); - mp = &clone; - } brelse(mp->mp_bh[hgt]); mp->mp_bh[hgt] = NULL; + mp->mp_list[hgt] = 0; if (!hgt) break; hgt--; @@ -491,10 +528,7 @@ lower_metapath: /* Advance in metadata tree. */ (mp->mp_list[hgt])++; - start = metapointer(hgt, mp); - end = metaend(hgt, mp); - if (start >= end) { - mp->mp_list[hgt] = 0; + if (mp->mp_list[hgt] >= sdp->sd_inptrs) { if (!hgt) break; goto lower_metapath; @@ -502,44 +536,36 @@ lower_metapath: fill_up_metapath: /* Increase height of metapath. */ - if (mp != &clone) { - clone_metapath(&clone, mp); - mp = &clone; - } ret = fillup_metapath(ip, mp, ip->i_height - 1); if (ret < 0) - break; + return ret; hgt += ret; for (; ret; ret--) do_div(factor, sdp->sd_inptrs); mp->mp_aheight = hgt + 1; } - if (mp == &clone) - release_metapath(mp); - return ret; + return 0; } -struct gfs2_hole_walker_args { - u64 blocks; -}; - -static const __be64 *gfs2_hole_walker(struct metapath *mp, - const __be64 *start, const __be64 *end, - u64 factor, void *data) +static enum walker_status gfs2_hole_walker(struct metapath *mp, + unsigned int ptrs) { - struct gfs2_hole_walker_args *args = data; - const __be64 *ptr; + const __be64 *start, *ptr, *end; + unsigned int hgt; + + hgt = mp->mp_aheight - 1; + start = metapointer(hgt, mp); + end = start + ptrs; for (ptr = start; ptr < end; ptr++) { if (*ptr) { - args->blocks += (ptr - start) * factor; + mp->mp_list[hgt] += ptr - start; if (mp->mp_aheight == mp->mp_fheight) return WALK_STOP; - return ptr; /* increase height */ + return WALK_FOLLOW; } } - args->blocks += (end - start) * factor; - return WALK_NEXT; + return WALK_CONTINUE; } /** @@ -557,12 +583,24 @@ static const __be64 *gfs2_hole_walker(struct metapath *mp, static int gfs2_hole_size(struct inode *inode, sector_t lblock, u64 len, struct metapath *mp, struct iomap *iomap) { - struct gfs2_hole_walker_args args = { }; - int ret = 0; + struct metapath clone; + u64 hole_size; + int ret; - ret = gfs2_walk_metadata(inode, lblock, len, mp, gfs2_hole_walker, &args); - if (!ret) - iomap->length = args.blocks << inode->i_blkbits; + clone_metapath(&clone, mp); + ret = gfs2_walk_metadata(inode, &clone, len, gfs2_hole_walker); + if (ret < 0) + goto out; + + if (ret == 1) + hole_size = metapath_to_block(GFS2_SB(inode), &clone) - lblock; + else + hole_size = len; + iomap->length = hole_size << inode->i_blkbits; + ret = 0; + +out: + release_metapath(&clone); return ret; } -- cgit From 47801c97deb71b9e279c15a02a44cf00aa11e7d9 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 2 Aug 2019 19:23:58 +0900 Subject: kbuild: revive single target %.ko I removed the single target %.ko in commit ff9b45c55b26 ("kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod") because the modpost stage does not work reliably. For instance, the module dependency, modversion, etc. do not work if we lack symbol information from the other modules. Yet, some people still want to build only one module in their interest, and it may be still useful if it is used within those limitations. Fixes: ff9b45c55b26 ("kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod") Reported-by: Don Brace Reported-by: Arend Van Spriel Signed-off-by: Masahiro Yamada --- Makefile | 11 +++++++++++ scripts/Makefile.modpost | 6 ++---- 2 files changed, 13 insertions(+), 4 deletions(-) diff --git a/Makefile b/Makefile index 23cdf1f41364..d1f35e32edc7 100644 --- a/Makefile +++ b/Makefile @@ -1002,6 +1002,8 @@ endif PHONY += prepare0 +export MODORDER := $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/)modules.order + ifeq ($(KBUILD_EXTMOD),) core-y += kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/ @@ -1771,6 +1773,15 @@ build-dir = $(patsubst %/,%,$(dir $(build-target))) $(Q)$(MAKE) $(build)=$(build-dir) $(build-target) %.symtypes: prepare FORCE $(Q)$(MAKE) $(build)=$(build-dir) $(build-target) +ifeq ($(KBUILD_EXTMOD),) +# For the single build of an in-tree module, use a temporary file to avoid +# the situation of modules_install installing an invalid modules.order. +%.ko: MODORDER := .modules.tmp +endif +%.ko: prepare FORCE + $(Q)$(MAKE) $(build)=$(build-dir) $(build-target:.ko=.mod) + $(Q)echo $(build-target) > $(MODORDER) + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost # Modules PHONY += / diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index 92ed02d7cd5e..26e6574ecd08 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -85,10 +85,8 @@ endif include scripts/Makefile.lib -modorder := $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/)modules.order - # find all modules listed in modules.order -modules := $(sort $(shell cat $(modorder))) +modules := $(sort $(shell cat $(MODORDER))) # Stop after building .o files if NOFINAL is set. Makes compile tests quicker __modpost: $(if $(KBUILD_MODPOST_NOFINAL), $(modules:.ko:.o),$(modules)) @@ -98,7 +96,7 @@ MODPOST += $(subst -i,-n,$(filter -i,$(MAKEFLAGS))) -s -T - $(wildcard vmlinux) # We can go over command line length here, so be careful. quiet_cmd_modpost = MODPOST $(words $(modules)) modules - cmd_modpost = sed 's/ko$$/o/' $(modorder) | $(MODPOST) + cmd_modpost = sed 's/ko$$/o/' $(MODORDER) | $(MODPOST) PHONY += modules-modpost modules-modpost: -- cgit From d9f78edfd81b9e484423534360350ef7253cc888 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 6 Aug 2019 19:03:21 +0900 Subject: kbuild: fix false-positive need-builtin calculation The current implementation of need-builtin is false-positive, for example, in the following Makefile: obj-m := foo/ obj-y := foo/bar/ ..., where foo/built-in.a is not required. Signed-off-by: Masahiro Yamada --- scripts/Makefile.build | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 0d434d0afc0b..3fe0c73e002c 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -487,7 +487,8 @@ targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) \ PHONY += $(subdir-ym) $(subdir-ym): - $(Q)$(MAKE) $(build)=$@ need-builtin=$(if $(findstring $@,$(subdir-obj-y)),1) + $(Q)$(MAKE) $(build)=$@ \ + need-builtin=$(if $(filter $@/built-in.a, $(subdir-obj-y)),1) # Add FORCE to the prequisites of a target to force it to be always rebuilt. # --------------------------------------------------------------------------- -- cgit From 4f2c8f3089f538f556c86f26603a062865e4aa94 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 6 Aug 2019 19:03:22 +0900 Subject: kbuild: generate modules.order only in directories visited by obj-y/m The modules.order files in directories visited by the chain of obj-y or obj-m are merged to the upper-level ones, and become parts of the top-level modules.order. On the other hand, there is no need to generate modules.order in directories visited by subdir-y or subdir-m since they would become orphan anyway. Signed-off-by: Masahiro Yamada --- scripts/Makefile.build | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 3fe0c73e002c..37a1d2cd49d4 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -488,7 +488,8 @@ targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) \ PHONY += $(subdir-ym) $(subdir-ym): $(Q)$(MAKE) $(build)=$@ \ - need-builtin=$(if $(filter $@/built-in.a, $(subdir-obj-y)),1) + need-builtin=$(if $(filter $@/built-in.a, $(subdir-obj-y)),1) \ + need-modorder=$(if $(need-modorder),$(if $(filter $@/modules.order, $(modorder)),1)) # Add FORCE to the prequisites of a target to force it to be always rebuilt. # --------------------------------------------------------------------------- -- cgit From c07d8d47bca1b325102fa2be3a463075f7b051d9 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 8 Aug 2019 20:21:11 +0900 Subject: kbuild: show hint if subdir-y/m is used to visit module Makefile Since commit ff9b45c55b26 ("kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod"), a module is no longer built in the following pattern: [Makefile] subdir-y := some-module [some-module/Makefile] obj-m := some-module.o You cannot write Makefile this way in upstream because modules.order is not correctly generated. subdir-y is used to descend to a sub-directory that builds tools, device trees, etc. For external modules, the modules order does not matter. So, the Makefile above was known to work. I believe the Makefile should be re-written as follows: [Makefile] obj-m := some-module/ [some-module/Makefile] obj-m := some-module.o However, people will have no idea if their Makefile suddenly stops working. In fact, I received questions from multiple people. Show a warning for a while if obj-m is specified in a Makefile visited by subdir-y or subdir-m. I touched the %/ rule to avoid false-positive warnings for the single target. Cc: Jan Kiszka Cc: Tom Stonecypher Signed-off-by: Masahiro Yamada Tested-by: Jan Kiszka --- Makefile | 2 +- scripts/Makefile.build | 7 +++++++ 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/Makefile b/Makefile index d1f35e32edc7..fd219e1452a0 100644 --- a/Makefile +++ b/Makefile @@ -1788,7 +1788,7 @@ PHONY += / /: ./ %/: prepare FORCE - $(Q)$(MAKE) KBUILD_MODULES=1 $(build)=$(build-dir) + $(Q)$(MAKE) KBUILD_MODULES=1 $(build)=$(build-dir) need-modorder=1 # FIXME Should go into a make.lib or something # =========================================================================== diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 37a1d2cd49d4..2f66ed388d1c 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -52,6 +52,13 @@ ifndef obj $(warning kbuild: Makefile.build is included improperly) endif +ifeq ($(MAKECMDGOALS)$(need-modorder),) +ifneq ($(obj-m),) +$(warning $(patsubst %.o,'%.ko',$(obj-m)) will not be built even though obj-m is specified.) +$(warning You cannot use subdir-y/m to visit a module Makefile. Use obj-y/m instead.) +endif +endif + # =========================================================================== ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),) -- cgit From e6a9522ac3ff59980ea00e070b6b8573aface36a Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Thu, 25 Jul 2019 15:29:57 -0500 Subject: drm/i915: Remove redundant user_access_end() from __copy_from_user() error path Objtool reports: drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0x36: redundant UACCESS disable __copy_from_user() already does both STAC and CLAC, so the user_access_end() in its error path adds an extra unnecessary CLAC. Fixes: 0b2c8f8b6b0c ("i915: fix missing user_access_end() in page fault exception case") Reported-by: Thomas Gleixner Reported-by: Sedat Dilek Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Tested-by: Nick Desaulniers Tested-by: Sedat Dilek Acked-by: Peter Zijlstra (Intel) Acked-by: Chris Wilson Link: https://github.com/ClangBuiltLinux/linux/issues/617 Link: https://lkml.kernel.org/r/51a4155c5bc2ca847a9cbe85c1c11918bb193141.1564086017.git.jpoimboe@redhat.com --- drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c index 5fae0e50aad0..41dab9ea33cd 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/gem/i915_gem_execbuffer.c @@ -1628,6 +1628,7 @@ static int check_relocations(const struct drm_i915_gem_exec_object2 *entry) static int eb_copy_relocations(const struct i915_execbuffer *eb) { + struct drm_i915_gem_relocation_entry *relocs; const unsigned int count = eb->buffer_count; unsigned int i; int err; @@ -1635,7 +1636,6 @@ static int eb_copy_relocations(const struct i915_execbuffer *eb) for (i = 0; i < count; i++) { const unsigned int nreloc = eb->exec[i].relocation_count; struct drm_i915_gem_relocation_entry __user *urelocs; - struct drm_i915_gem_relocation_entry *relocs; unsigned long size; unsigned long copied; @@ -1663,14 +1663,8 @@ static int eb_copy_relocations(const struct i915_execbuffer *eb) if (__copy_from_user((char *)relocs + copied, (char __user *)urelocs + copied, - len)) { -end_user: - user_access_end(); -end: - kvfree(relocs); - err = -EFAULT; - goto err; - } + len)) + goto end; copied += len; } while (copied < size); @@ -1699,10 +1693,14 @@ end: return 0; +end_user: + user_access_end(); +end: + kvfree(relocs); + err = -EFAULT; err: while (i--) { - struct drm_i915_gem_relocation_entry *relocs = - u64_to_ptr(typeof(*relocs), eb->exec[i].relocs_ptr); + relocs = u64_to_ptr(typeof(*relocs), eb->exec[i].relocs_ptr); if (eb->exec[i].relocation_count) kvfree(relocs); } -- cgit From 06282373ff57a2b82621be4f84f981e1b0a4eb28 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 8 Aug 2019 14:43:49 -0700 Subject: mm/memremap: Fix reuse of pgmap instances with internal references Currently, attempts to shutdown and re-enable a device-dax instance trigger: Missing reference count teardown definition WARNING: CPU: 37 PID: 1608 at mm/memremap.c:211 devm_memremap_pages+0x234/0x850 [..] RIP: 0010:devm_memremap_pages+0x234/0x850 [..] Call Trace: dev_dax_probe+0x66/0x190 [device_dax] really_probe+0xef/0x390 driver_probe_device+0xb4/0x100 device_driver_attach+0x4f/0x60 Given that the setup path initializes pgmap->ref, arrange for it to be also torn down so devm_memremap_pages() is ready to be called again and not be mistaken for the 3rd-party per-cpu-ref case. Fixes: 24917f6b1041 ("memremap: provide an optional internal refcount in struct dev_pagemap") Reported-by: Fan Du Tested-by: Vishal Verma Cc: Andrew Morton Cc: Christoph Hellwig Cc: Ira Weiny Cc: Jason Gunthorpe Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/156530042781.2068700.8733813683117819799.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams --- mm/memremap.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/mm/memremap.c b/mm/memremap.c index 6ee03a816d67..86432650f829 100644 --- a/mm/memremap.c +++ b/mm/memremap.c @@ -91,6 +91,12 @@ static void dev_pagemap_cleanup(struct dev_pagemap *pgmap) wait_for_completion(&pgmap->done); percpu_ref_exit(pgmap->ref); } + /* + * Undo the pgmap ref assignment for the internal case as the + * caller may re-enable the same pgmap. + */ + if (pgmap->ref == &pgmap->internal_ref) + pgmap->ref = NULL; } static void devm_memremap_pages_release(void *data) -- cgit From 2d0e988d8427b7b9c6d5c7835b6944405c038011 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sun, 28 Jul 2019 18:02:41 -0500 Subject: ARM/hw_breakpoint: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_arch_parse': arch/arm/kernel/hw_breakpoint.c:609:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2) ^ arch/arm/kernel/hw_breakpoint.c:611:2: note: here case 3: ^~~~ arch/arm/kernel/hw_breakpoint.c:613:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1) ^ arch/arm/kernel/hw_breakpoint.c:615:2: note: here default: ^~~~~~~ arch/arm/kernel/hw_breakpoint.c: In function 'arch_build_bp_info': arch/arm/kernel/hw_breakpoint.c:544:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((hw->ctrl.type != ARM_BREAKPOINT_EXECUTE) ^ arch/arm/kernel/hw_breakpoint.c:547:2: note: here default: ^~~~~~~ In file included from include/linux/kernel.h:11, from include/linux/list.h:9, from include/linux/preempt.h:11, from include/linux/hardirq.h:5, from arch/arm/kernel/hw_breakpoint.c:16: arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_pending': include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=] # define unlikely(x) __builtin_expect(!!(x), 0) ^~~~~~~~~~~~~~~~~~~~~~~~~~ include/asm-generic/bug.h:136:2: note: in expansion of macro 'unlikely' unlikely(__ret_warn_on); \ ^~~~~~~~ arch/arm/kernel/hw_breakpoint.c:863:3: note: in expansion of macro 'WARN' WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n"); ^~~~ arch/arm/kernel/hw_breakpoint.c:864:2: note: here case ARM_ENTRY_SYNC_WATCHPOINT: ^~~~ arch/arm/kernel/hw_breakpoint.c: In function 'core_has_os_save_restore': arch/arm/kernel/hw_breakpoint.c:910:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (oslsr & ARM_OSLSR_OSLM0) ^ arch/arm/kernel/hw_breakpoint.c:912:2: note: here default: ^~~~~~~ Reported-by: Stephen Rothwell Reviewed-by: Kees Cook Signed-off-by: Gustavo A. R. Silva --- arch/arm/kernel/hw_breakpoint.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index af8b8e15f589..b0c195e3a06d 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -544,6 +544,7 @@ static int arch_build_bp_info(struct perf_event *bp, if ((hw->ctrl.type != ARM_BREAKPOINT_EXECUTE) && max_watchpoint_len >= 8) break; + /* Else, fall through */ default: return -EINVAL; } @@ -608,10 +609,12 @@ int hw_breakpoint_arch_parse(struct perf_event *bp, /* Allow halfword watchpoints and breakpoints. */ if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2) break; + /* Else, fall through */ case 3: /* Allow single byte watchpoint. */ if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1) break; + /* Else, fall through */ default: ret = -EINVAL; goto out; @@ -861,6 +864,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, break; case ARM_ENTRY_ASYNC_WATCHPOINT: WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n"); + /* Fall through */ case ARM_ENTRY_SYNC_WATCHPOINT: watchpoint_handler(addr, fsr, regs); break; @@ -909,6 +913,7 @@ static bool core_has_os_save_restore(void) ARM_DBG_READ(c1, c1, 4, oslsr); if (oslsr & ARM_OSLSR_OSLM0) return true; + /* Else, fall through */ default: return false; } -- cgit From 9b76ad3a9cc5ebb1dde650c8a9937f045e2707a2 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sun, 28 Jul 2019 18:10:21 -0500 Subject: ARM: tegra: Mark expected switch fall-through Mark switch cases where we are expecting to fall through. This patch fixes the following warning: arch/arm/mach-tegra/reset.c: In function 'tegra_cpu_reset_handler_enable': arch/arm/mach-tegra/reset.c:72:3: warning: this statement may fall through [-Wimplicit-fallthrough=] tegra_cpu_reset_handler_set(reset_address); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-tegra/reset.c:74:2: note: here case 0: ^~~~ Reported-by: Stephen Rothwell Reviewed-by: Kees Cook Signed-off-by: Gustavo A. R. Silva --- arch/arm/mach-tegra/reset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 5a67a71f80cc..76a65df42d10 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -70,7 +70,7 @@ static void __init tegra_cpu_reset_handler_enable(void) switch (err) { case -ENOSYS: tegra_cpu_reset_handler_set(reset_address); - /* pass-through */ + /* fall through */ case 0: is_enabled = true; break; -- cgit From e7c0c9f6028dfa09ea9f20c5f1d387e5858afede Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sun, 28 Jul 2019 18:17:18 -0500 Subject: ARM: alignment: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/arm/mm/alignment.c: In function 'thumb2arm': arch/arm/mm/alignment.c:688:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((tinstr & (3 << 9)) == 0x0400) { ^ arch/arm/mm/alignment.c:700:2: note: here default: ^~~~~~~ arch/arm/mm/alignment.c: In function 'do_alignment_t32_to_handler': arch/arm/mm/alignment.c:753:15: warning: this statement may fall through [-Wimplicit-fallthrough=] poffset->un = (tinst2 & 0xff) << 2; ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ arch/arm/mm/alignment.c:754:2: note: here case 0xe940: ^~~~ Reported-by: Stephen Rothwell Reviewed-by: Kees Cook Signed-off-by: Gustavo A. R. Silva --- arch/arm/mm/alignment.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 8cdb78642e93..04b36436cbc0 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -695,7 +695,7 @@ thumb2arm(u16 tinstr) return subset[(L<<1) | ((tinstr & (1<<8)) >> 8)] | (tinstr & 255); /* register_list */ } - /* Else fall through for illegal instruction case */ + /* Else, fall through - for illegal instruction case */ default: return BAD_INSTR; @@ -751,6 +751,8 @@ do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs, case 0xe8e0: case 0xe9e0: poffset->un = (tinst2 & 0xff) << 2; + /* Fall through */ + case 0xe940: case 0xe9c0: return do_alignment_ldrdstrd; -- cgit From 3da6bd945b71c5fdd5db7b19224b8fc0b4d78ed8 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sun, 28 Jul 2019 18:19:41 -0500 Subject: ARM: OMAP: dma: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/arm/plat-omap/dma.c: In function 'omap_set_dma_src_burst_mode': arch/arm/plat-omap/dma.c:384:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:393:2: note: here case OMAP_DMA_DATA_BURST_16: ^~~~ arch/arm/plat-omap/dma.c:394:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:402:2: note: here default: ^~~~~~~ arch/arm/plat-omap/dma.c: In function 'omap_set_dma_dest_burst_mode': arch/arm/plat-omap/dma.c:473:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:481:2: note: here default: ^~~~~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: Stephen Rothwell Reviewed-by: Kees Cook Signed-off-by: Gustavo A. R. Silva --- arch/arm/plat-omap/dma.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 79f43acf9acb..08c99413d02c 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -388,17 +388,15 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) /* * not supported by current hardware on OMAP1 * w |= (0x03 << 7); - * fall through */ + /* fall through */ case OMAP_DMA_DATA_BURST_16: if (dma_omap2plus()) { burst = 0x3; break; } - /* - * OMAP1 don't support burst 16 - * fall through - */ + /* OMAP1 don't support burst 16 */ + /* fall through */ default: BUG(); } @@ -474,10 +472,8 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) burst = 0x3; break; } - /* - * OMAP1 don't support burst 16 - * fall through - */ + /* OMAP1 don't support burst 16 */ + /* fall through */ default: printk(KERN_ERR "Invalid DMA burst mode\n"); BUG(); -- cgit From 795952d9f40c451a8b22c6610df1d59f57ce2046 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sun, 28 Jul 2019 18:53:15 -0500 Subject: mfd: db8500-prcmu: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/mfd/db8500-prcmu.c: In function 'dsiclk_rate': drivers/mfd/db8500-prcmu.c:1592:7: warning: this statement may fall through [-Wimplicit-fallthrough=] div *= 2; ~~~~^~~~ drivers/mfd/db8500-prcmu.c:1593:2: note: here case PRCM_DSI_PLLOUT_SEL_PHI_2: ^~~~ drivers/mfd/db8500-prcmu.c:1594:7: warning: this statement may fall through [-Wimplicit-fallthrough=] div *= 2; ~~~~^~~~ drivers/mfd/db8500-prcmu.c:1595:2: note: here case PRCM_DSI_PLLOUT_SEL_PHI: ^~~~ Reported-by: Stephen Rothwell Reviewed-by: Kees Cook Reviewed-by: Linus Walleij Signed-off-by: Gustavo A. R. Silva --- drivers/mfd/db8500-prcmu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 3f21e26b8d36..90e0f21bc49c 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -1590,8 +1590,10 @@ static unsigned long dsiclk_rate(u8 n) switch (divsel) { case PRCM_DSI_PLLOUT_SEL_PHI_4: div *= 2; + /* Fall through */ case PRCM_DSI_PLLOUT_SEL_PHI_2: div *= 2; + /* Fall through */ case PRCM_DSI_PLLOUT_SEL_PHI: return pll_rate(PRCM_PLLDSI_FREQ, clock_rate(PRCMU_HDMICLK), PLL_RAW) / div; -- cgit From 9039782047e769bd446667a9c14c0d3b8948ae51 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sun, 28 Jul 2019 18:57:05 -0500 Subject: mfd: omap-usb-host: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_resume': drivers/mfd/omap-usb-host.c:303:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (!IS_ERR(omap->hsic480m_clk[i])) { ^ drivers/mfd/omap-usb-host.c:313:3: note: here case OMAP_EHCI_PORT_MODE_TLL: ^~~~ drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_suspend': drivers/mfd/omap-usb-host.c:345:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (!IS_ERR(omap->hsic480m_clk[i])) ^ drivers/mfd/omap-usb-host.c:349:3: note: here case OMAP_EHCI_PORT_MODE_TLL: ^~~~ Reported-by: Stephen Rothwell Reviewed-by: Kees Cook Signed-off-by: Gustavo A. R. Silva --- drivers/mfd/omap-usb-host.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 792b855a9104..4798d9f3f9d5 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -308,7 +308,7 @@ static int usbhs_runtime_resume(struct device *dev) i, r); } } - /* Fall through as HSIC mode needs utmi_clk */ + /* Fall through - as HSIC mode needs utmi_clk */ case OMAP_EHCI_PORT_MODE_TLL: if (!IS_ERR(omap->utmi_clk[i])) { @@ -344,7 +344,7 @@ static int usbhs_runtime_suspend(struct device *dev) if (!IS_ERR(omap->hsic480m_clk[i])) clk_disable_unprepare(omap->hsic480m_clk[i]); - /* Fall through as utmi_clks were used in HSIC mode */ + /* Fall through - as utmi_clks were used in HSIC mode */ case OMAP_EHCI_PORT_MODE_TLL: if (!IS_ERR(omap->utmi_clk[i])) -- cgit From e9d81fc5b2014eb17d45ba4940bfb603d57bbcb3 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Sun, 28 Jul 2019 19:11:11 -0500 Subject: ARM: signal: Mark expected switch fall-through Mark switch cases where we are expecting to fall through. This patch fixes the following warning: arch/arm/kernel/signal.c: In function 'do_signal': arch/arm/kernel/signal.c:598:12: warning: this statement may fall through [-Wimplicit-fallthrough=] restart -= 2; ~~~~~~~~^~~~ arch/arm/kernel/signal.c:599:3: note: here case -ERESTARTNOHAND: ^~~~ Reported-by: Stephen Rothwell Reviewed-by: Kees Cook Signed-off-by: Gustavo A. R. Silva --- arch/arm/kernel/signal.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 09f6fdd41974..ab2568996ddb 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -596,6 +596,7 @@ static int do_signal(struct pt_regs *regs, int syscall) switch (retval) { case -ERESTART_RESTARTBLOCK: restart -= 2; + /* Fall through */ case -ERESTARTNOHAND: case -ERESTARTSYS: case -ERESTARTNOINTR: -- cgit From d259f94f7265065b5c2b2bd5bbe4fa9b76504440 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 10:08:05 -0500 Subject: watchdog: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/watchdog/ar7_wdt.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 237:3 drivers/watchdog/pcwd.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 653:3 drivers/watchdog/sb_wdog.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 204:3 drivers/watchdog/wdt.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 391:3 Reported-by: Geert Uytterhoeven Reviewed-by: Kees Cook Reviewed-by: Guenter Roeck Signed-off-by: Gustavo A. R. Silva --- drivers/watchdog/ar7_wdt.c | 1 + drivers/watchdog/pcwd.c | 2 +- drivers/watchdog/sb_wdog.c | 1 + drivers/watchdog/wdt.c | 2 +- 4 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c index b9b2d06b3879..668a1c704f28 100644 --- a/drivers/watchdog/ar7_wdt.c +++ b/drivers/watchdog/ar7_wdt.c @@ -235,6 +235,7 @@ static long ar7_wdt_ioctl(struct file *file, ar7_wdt_update_margin(new_margin); ar7_wdt_kick(1); spin_unlock(&wdt_lock); + /* Fall through */ case WDIOC_GETTIMEOUT: if (put_user(margin, (int *)arg)) diff --git a/drivers/watchdog/pcwd.c b/drivers/watchdog/pcwd.c index 1b2cf5b95a89..c3c93e00b320 100644 --- a/drivers/watchdog/pcwd.c +++ b/drivers/watchdog/pcwd.c @@ -651,7 +651,7 @@ static long pcwd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return -EINVAL; pcwd_keepalive(); - /* Fall */ + /* Fall through */ case WDIOC_GETTIMEOUT: return put_user(heartbeat, argp); diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c index 5a6ced7a7e8f..202fc8d8ca5f 100644 --- a/drivers/watchdog/sb_wdog.c +++ b/drivers/watchdog/sb_wdog.c @@ -202,6 +202,7 @@ static long sbwdog_ioctl(struct file *file, unsigned int cmd, timeout = time; sbwdog_set(user_dog, timeout); sbwdog_pet(user_dog); + /* Fall through */ case WDIOC_GETTIMEOUT: /* diff --git a/drivers/watchdog/wdt.c b/drivers/watchdog/wdt.c index 0650100fad00..7d278b37e083 100644 --- a/drivers/watchdog/wdt.c +++ b/drivers/watchdog/wdt.c @@ -389,7 +389,7 @@ static long wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) if (wdt_set_heartbeat(new_heartbeat)) return -EINVAL; wdt_ping(); - /* Fall */ + /* Fall through */ case WDIOC_GETTIMEOUT: return put_user(heartbeat, p); default: -- cgit From 24f2161887c90ca3791f0224933642b6da7f9573 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 15:03:49 -0500 Subject: watchdog: scx200_wdt: Mark expected switch fall-through MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: i386): drivers/watchdog/scx200_wdt.c: In function ‘scx200_wdt_ioctl’: drivers/watchdog/scx200_wdt.c:188:3: warning: this statement may fall through [-Wimplicit-fallthrough=] scx200_wdt_ping(); ^~~~~~~~~~~~~~~~~ drivers/watchdog/scx200_wdt.c:189:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: Kees Cook Reviewed-by: Guenter Roeck Signed-off-by: Gustavo A. R. Silva --- drivers/watchdog/scx200_wdt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/watchdog/scx200_wdt.c b/drivers/watchdog/scx200_wdt.c index efd7996694de..46268309ee9b 100644 --- a/drivers/watchdog/scx200_wdt.c +++ b/drivers/watchdog/scx200_wdt.c @@ -186,6 +186,7 @@ static long scx200_wdt_ioctl(struct file *file, unsigned int cmd, margin = new_margin; scx200_wdt_update_margin(); scx200_wdt_ping(); + /* Fall through */ case WDIOC_GETTIMEOUT: if (put_user(margin, p)) return -EFAULT; -- cgit From d51c61637b4aca6c06015a34063e41279c32b8e8 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 17:30:57 -0500 Subject: watchdog: wdt977: Mark expected switch fall-through MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/watchdog/wdt977.c: In function ‘wdt977_ioctl’: LD [M] drivers/media/platform/vicodec/vicodec.o drivers/watchdog/wdt977.c:400:3: warning: this statement may fall through [-Wimplicit-fallthrough=] wdt977_keepalive(); ^~~~~~~~~~~~~~~~~~ drivers/watchdog/wdt977.c:403:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: Kees Cook Reviewed-by: Guenter Roeck Signed-off-by: Gustavo A. R. Silva --- drivers/watchdog/wdt977.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/wdt977.c b/drivers/watchdog/wdt977.c index 567005d7598e..5c52c73e1839 100644 --- a/drivers/watchdog/wdt977.c +++ b/drivers/watchdog/wdt977.c @@ -398,7 +398,7 @@ static long wdt977_ioctl(struct file *file, unsigned int cmd, return -EINVAL; wdt977_keepalive(); - /* Fall */ + /* Fall through */ case WDIOC_GETTIMEOUT: return put_user(timeout, uarg.i); -- cgit From 3d86c7ad56a9b1109a705a100990f1e7be1d3d43 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 17:35:45 -0500 Subject: crypto: ux500/crypt: Mark expected switch fall-throughs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: arm): drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_save_device_context’: drivers/crypto/ux500/cryp/cryp.c:316:16: warning: this statement may fall through [-Wimplicit-fallthrough=] ctx->key_4_r = readl_relaxed(&src_reg->key_4_r); drivers/crypto/ux500/cryp/cryp.c:318:2: note: here case CRYP_KEY_SIZE_192: ^~~~ drivers/crypto/ux500/cryp/cryp.c:320:16: warning: this statement may fall through [-Wimplicit-fallthrough=] ctx->key_3_r = readl_relaxed(&src_reg->key_3_r); drivers/crypto/ux500/cryp/cryp.c:322:2: note: here case CRYP_KEY_SIZE_128: ^~~~ drivers/crypto/ux500/cryp/cryp.c:324:16: warning: this statement may fall through [-Wimplicit-fallthrough=] ctx->key_2_r = readl_relaxed(&src_reg->key_2_r); drivers/crypto/ux500/cryp/cryp.c:326:2: note: here default: ^~~~~~~ In file included from ./include/linux/io.h:13:0, from drivers/crypto/ux500/cryp/cryp_p.h:14, from drivers/crypto/ux500/cryp/cryp.c:15: drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_restore_device_context’: ./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __raw_writel __raw_writel ^ ./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’ #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) ^~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:363:3: note: in expansion of macro ‘writel_relaxed’ writel_relaxed(ctx->key_4_r, ®->key_4_r); ^~~~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:365:2: note: here case CRYP_KEY_SIZE_192: ^~~~ In file included from ./include/linux/io.h:13:0, from drivers/crypto/ux500/cryp/cryp_p.h:14, from drivers/crypto/ux500/cryp/cryp.c:15: ./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __raw_writel __raw_writel ^ ./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’ #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) ^~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:367:3: note: in expansion of macro ‘writel_relaxed’ writel_relaxed(ctx->key_3_r, ®->key_3_r); ^~~~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:369:2: note: here case CRYP_KEY_SIZE_128: ^~~~ In file included from ./include/linux/io.h:13:0, from drivers/crypto/ux500/cryp/cryp_p.h:14, from drivers/crypto/ux500/cryp/cryp.c:15: ./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=] #define __raw_writel __raw_writel ^ ./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’ #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) ^~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:371:3: note: in expansion of macro ‘writel_relaxed’ writel_relaxed(ctx->key_2_r, ®->key_2_r); ^~~~~~~~~~~~~~ drivers/crypto/ux500/cryp/cryp.c:373:2: note: here default: ^~~~~~~ Signed-off-by: Gustavo A. R. Silva --- drivers/crypto/ux500/cryp/cryp.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/crypto/ux500/cryp/cryp.c b/drivers/crypto/ux500/cryp/cryp.c index ece83a363e11..f22f6fa612b3 100644 --- a/drivers/crypto/ux500/cryp/cryp.c +++ b/drivers/crypto/ux500/cryp/cryp.c @@ -314,14 +314,17 @@ void cryp_save_device_context(struct cryp_device_data *device_data, case CRYP_KEY_SIZE_256: ctx->key_4_l = readl_relaxed(&src_reg->key_4_l); ctx->key_4_r = readl_relaxed(&src_reg->key_4_r); + /* Fall through */ case CRYP_KEY_SIZE_192: ctx->key_3_l = readl_relaxed(&src_reg->key_3_l); ctx->key_3_r = readl_relaxed(&src_reg->key_3_r); + /* Fall through */ case CRYP_KEY_SIZE_128: ctx->key_2_l = readl_relaxed(&src_reg->key_2_l); ctx->key_2_r = readl_relaxed(&src_reg->key_2_r); + /* Fall through */ default: ctx->key_1_l = readl_relaxed(&src_reg->key_1_l); @@ -361,14 +364,17 @@ void cryp_restore_device_context(struct cryp_device_data *device_data, case CRYP_KEY_SIZE_256: writel_relaxed(ctx->key_4_l, ®->key_4_l); writel_relaxed(ctx->key_4_r, ®->key_4_r); + /* Fall through */ case CRYP_KEY_SIZE_192: writel_relaxed(ctx->key_3_l, ®->key_3_l); writel_relaxed(ctx->key_3_r, ®->key_3_r); + /* Fall through */ case CRYP_KEY_SIZE_128: writel_relaxed(ctx->key_2_l, ®->key_2_l); writel_relaxed(ctx->key_2_r, ®->key_2_r); + /* Fall through */ default: writel_relaxed(ctx->key_1_l, ®->key_1_l); -- cgit From 7b7331511e66cfe671e88daa7133f6597a86aced Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 19:13:54 -0500 Subject: s390/net: Mark expected switch fall-throughs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: s390): drivers/s390/net/ctcm_fsms.c: In function ‘ctcmpc_chx_attnbusy’: drivers/s390/net/ctcm_fsms.c:1703:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (grp->changed_side == 1) { ^ drivers/s390/net/ctcm_fsms.c:1707:2: note: here case MPCG_STATE_XID0IOWAIX: ^~~~ drivers/s390/net/ctcm_mpc.c: In function ‘ctc_mpc_alloc_channel’: drivers/s390/net/ctcm_mpc.c:358:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (callback) ^ drivers/s390/net/ctcm_mpc.c:360:2: note: here case MPCG_STATE_XID0IOWAIT: ^~~~ drivers/s390/net/ctcm_mpc.c: In function ‘mpc_action_timeout’: drivers/s390/net/ctcm_mpc.c:1469:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((fsm_getstate(rch->fsm) == CH_XID0_PENDING) && ^ drivers/s390/net/ctcm_mpc.c:1472:2: note: here default: ^~~~~~~ drivers/s390/net/ctcm_mpc.c: In function ‘mpc_send_qllc_discontact’: drivers/s390/net/ctcm_mpc.c:2087:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (grp->estconnfunc) { ^ drivers/s390/net/ctcm_mpc.c:2092:2: note: here case MPCG_STATE_FLOWC: ^~~~ drivers/s390/net/qeth_l2_main.c: In function ‘qeth_l2_process_inbound_buffer’: drivers/s390/net/qeth_l2_main.c:328:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (IS_OSN(card)) { ^ drivers/s390/net/qeth_l2_main.c:337:3: note: here default: ^~~~~~~ Reviewed-by: Kees Cook Signed-off-by: Gustavo A. R. Silva --- drivers/s390/net/ctcm_fsms.c | 1 + drivers/s390/net/ctcm_mpc.c | 3 +++ drivers/s390/net/qeth_l2_main.c | 2 +- 3 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/s390/net/ctcm_fsms.c b/drivers/s390/net/ctcm_fsms.c index 1b4ee570b712..4a8a5373cb35 100644 --- a/drivers/s390/net/ctcm_fsms.c +++ b/drivers/s390/net/ctcm_fsms.c @@ -1704,6 +1704,7 @@ static void ctcmpc_chx_attnbusy(fsm_instance *fsm, int event, void *arg) grp->changed_side = 2; break; } + /* Else, fall through */ case MPCG_STATE_XID0IOWAIX: case MPCG_STATE_XID7INITW: case MPCG_STATE_XID7INITX: diff --git a/drivers/s390/net/ctcm_mpc.c b/drivers/s390/net/ctcm_mpc.c index e02f295d38a9..1534420a0243 100644 --- a/drivers/s390/net/ctcm_mpc.c +++ b/drivers/s390/net/ctcm_mpc.c @@ -357,6 +357,7 @@ int ctc_mpc_alloc_channel(int port_num, void (*callback)(int, int)) /*fsm_newstate(grp->fsm, MPCG_STATE_XID2INITW);*/ if (callback) grp->send_qllc_disc = 1; + /* Else, fall through */ case MPCG_STATE_XID0IOWAIT: fsm_deltimer(&grp->timer); grp->outstanding_xid2 = 0; @@ -1469,6 +1470,7 @@ static void mpc_action_timeout(fsm_instance *fi, int event, void *arg) if ((fsm_getstate(rch->fsm) == CH_XID0_PENDING) && (fsm_getstate(wch->fsm) == CH_XID0_PENDING)) break; + /* Else, fall through */ default: fsm_event(grp->fsm, MPCG_EVENT_INOP, dev); } @@ -2089,6 +2091,7 @@ static int mpc_send_qllc_discontact(struct net_device *dev) grp->estconnfunc = NULL; break; } + /* Else, fall through */ case MPCG_STATE_FLOWC: case MPCG_STATE_READY: grp->send_qllc_disc = 2; diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index fd64bc3f4062..cbead3d1b2fd 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -333,7 +333,7 @@ static int qeth_l2_process_inbound_buffer(struct qeth_card *card, card->osn_info.data_cb(skb); break; } - /* else unknown */ + /* Else, fall through */ default: dev_kfree_skb_any(skb); QETH_CARD_TEXT(card, 3, "inbunkno"); -- cgit From 40ad2de37f2a6be5726eb40ed085dff60df3099b Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 29 Jul 2019 20:45:29 -0500 Subject: watchdog: riowd: Mark expected switch fall-through MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: sparc64): drivers/watchdog/riowd.c: In function ‘riowd_ioctl’: drivers/watchdog/riowd.c:136:3: warning: this statement may fall through [-Wimplicit-fallthrough=] riowd_writereg(p, riowd_timeout, WDTO_INDEX); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/watchdog/riowd.c:139:2: note: here case WDIOC_GETTIMEOUT: ^~~~ Reviewed-by: Kees Cook Reviewed-by: Guenter Roeck Signed-off-by: Gustavo A. R. Silva --- drivers/watchdog/riowd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/riowd.c b/drivers/watchdog/riowd.c index 41a2a11535a6..b35f7be20c00 100644 --- a/drivers/watchdog/riowd.c +++ b/drivers/watchdog/riowd.c @@ -134,7 +134,7 @@ static long riowd_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) return -EINVAL; riowd_timeout = (new_margin + 59) / 60; riowd_writereg(p, riowd_timeout, WDTO_INDEX); - /* Fall */ + /* Fall through */ case WDIOC_GETTIMEOUT: return put_user(riowd_timeout * 60, (int __user *)argp); -- cgit From 70a2783c1893a7e485b3be1c2ef23286fa252493 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Fri, 2 Aug 2019 14:10:29 -0500 Subject: video: fbdev: omapfb_main: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warning (Building: omap1_defconfig arm): drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/watchdog/ar7_wdt.c:237:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:449:23: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1549:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1547:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1545:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1543:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1540:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1538:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/video/fbdev/omap/omapfb_main.c:1535:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Reviewed-by: Kees Cook Signed-off-by: Gustavo A. R. Silva --- drivers/video/fbdev/omap/omapfb_main.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/video/fbdev/omap/omapfb_main.c b/drivers/video/fbdev/omap/omapfb_main.c index 90eca64e3144..702cca59bda1 100644 --- a/drivers/video/fbdev/omap/omapfb_main.c +++ b/drivers/video/fbdev/omap/omapfb_main.c @@ -447,6 +447,7 @@ static int set_color_mode(struct omapfb_plane_struct *plane, return 0; case 12: var->bits_per_pixel = 16; + /* fall through */ case 16: if (plane->fbdev->panel->bpp == 12) plane->color_mode = OMAPFB_COLOR_RGB444; @@ -1534,20 +1535,27 @@ static void omapfb_free_resources(struct omapfb_device *fbdev, int state) case OMAPFB_ACTIVE: for (i = 0; i < fbdev->mem_desc.region_cnt; i++) unregister_framebuffer(fbdev->fb_info[i]); + /* fall through */ case 7: omapfb_unregister_sysfs(fbdev); + /* fall through */ case 6: if (fbdev->panel->disable) fbdev->panel->disable(fbdev->panel); + /* fall through */ case 5: omapfb_set_update_mode(fbdev, OMAPFB_UPDATE_DISABLED); + /* fall through */ case 4: planes_cleanup(fbdev); + /* fall through */ case 3: ctrl_cleanup(fbdev); + /* fall through */ case 2: if (fbdev->panel->cleanup) fbdev->panel->cleanup(fbdev->panel); + /* fall through */ case 1: dev_set_drvdata(fbdev->dev, NULL); kfree(fbdev); -- cgit From 5f163f331b645106d548f3fcddfa1f92c1af60d0 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Mon, 5 Aug 2019 14:47:35 -0500 Subject: pcmcia: db1xxx_ss: Mark expected switch fall-throughs Mark switch cases where we are expecting to fall through. This patch fixes the following warnings (Building: db1xxx_defconfig mips): drivers/pcmcia/db1xxx_ss.c:257:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/pcmcia/db1xxx_ss.c:269:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Reviewed-by: Kees Cook Signed-off-by: Gustavo A. R. Silva --- drivers/pcmcia/db1xxx_ss.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c index eb6168e6ac43..590e594092f2 100644 --- a/drivers/pcmcia/db1xxx_ss.c +++ b/drivers/pcmcia/db1xxx_ss.c @@ -255,8 +255,10 @@ static int db1x_pcmcia_configure(struct pcmcia_socket *skt, switch (state->Vcc) { case 50: ++v; + /* fall through */ case 33: ++v; + /* fall through */ case 0: break; default: @@ -267,9 +269,11 @@ static int db1x_pcmcia_configure(struct pcmcia_socket *skt, switch (state->Vpp) { case 12: ++p; + /* fall through */ case 33: case 50: ++p; + /* fall through */ case 0: break; default: -- cgit From fccf01b6473c68692579bc008c1d38d6c3fcb276 Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 6 Aug 2019 03:26:15 -0500 Subject: scsi: fas216: Mark expected switch fall-throughs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: rpc_defconfig arm): drivers/scsi/arm/fas216.c: In function ‘fas216_disconnect_intr’: drivers/scsi/arm/fas216.c:913:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) { ^ drivers/scsi/arm/fas216.c:919:2: note: here default: /* huh? */ ^~~~~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_kick’: drivers/scsi/arm/fas216.c:1959:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_allocate_tag(info, SCpnt); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1960:2: note: here case TYPE_OTHER: ^~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_busservice_intr’: drivers/scsi/arm/fas216.c:1413:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1414:2: note: here case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */ ^~~~ drivers/scsi/arm/fas216.c:1424:3: warning: this statement may fall through [-Wimplicit-fallthrough=] fas216_stoptransfer(info); ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:1425:2: note: here case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */ ^~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_funcdone_intr’: drivers/scsi/arm/fas216.c:1573:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((stat & STAT_BUSMASK) == STAT_MESGIN) { ^ drivers/scsi/arm/fas216.c:1579:2: note: here default: ^~~~~~~ drivers/scsi/arm/fas216.c: In function ‘fas216_handlesync’: drivers/scsi/arm/fas216.c:605:20: warning: this statement may fall through [-Wimplicit-fallthrough=] info->scsi.phase = PHASE_MSGOUT_EXPECT; ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~ drivers/scsi/arm/fas216.c:607:2: note: here case async: ^~~~ Signed-off-by: Gustavo A. R. Silva --- drivers/scsi/arm/fas216.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c index aea4fd73c862..6c68c2303638 100644 --- a/drivers/scsi/arm/fas216.c +++ b/drivers/scsi/arm/fas216.c @@ -603,6 +603,7 @@ static void fas216_handlesync(FAS216_Info *info, char *msg) msgqueue_flush(&info->scsi.msgs); msgqueue_addmsg(&info->scsi.msgs, 1, MESSAGE_REJECT); info->scsi.phase = PHASE_MSGOUT_EXPECT; + /* fall through */ case async: dev->period = info->ifcfg.asyncperiod / 4; @@ -915,6 +916,7 @@ static void fas216_disconnect_intr(FAS216_Info *info) fas216_done(info, DID_ABORT); break; } + /* else, fall through */ default: /* huh? */ printk(KERN_ERR "scsi%d.%c: unexpected disconnect in phase %s\n", @@ -1411,6 +1413,8 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne case STATE(STAT_STATUS, PHASE_DATAOUT): /* Data Out -> Status */ case STATE(STAT_STATUS, PHASE_DATAIN): /* Data In -> Status */ fas216_stoptransfer(info); + /* fall through */ + case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */ case STATE(STAT_STATUS, PHASE_MSGOUT): /* Message Out -> Status */ case STATE(STAT_STATUS, PHASE_COMMAND): /* Command -> Status */ @@ -1422,6 +1426,8 @@ static void fas216_busservice_intr(FAS216_Info *info, unsigned int stat, unsigne case STATE(STAT_MESGIN, PHASE_DATAOUT): /* Data Out -> Message In */ case STATE(STAT_MESGIN, PHASE_DATAIN): /* Data In -> Message In */ fas216_stoptransfer(info); + /* fall through */ + case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */ case STATE(STAT_MESGIN, PHASE_SELSTEPS):/* Sel w/ steps -> Message In */ case STATE(STAT_MESGIN, PHASE_MSGOUT): /* Message Out -> Message In */ @@ -1575,6 +1581,7 @@ static void fas216_funcdone_intr(FAS216_Info *info, unsigned int stat, unsigned fas216_message(info); break; } + /* else, fall through */ default: fas216_log(info, 0, "internal phase %s for function done?" @@ -1957,6 +1964,7 @@ static void fas216_kick(FAS216_Info *info) switch (where_from) { case TYPE_QUEUE: fas216_allocate_tag(info, SCpnt); + /* fall through */ case TYPE_OTHER: fas216_start_command(info, SCpnt); break; -- cgit From 1f7585f30a3af595ac07f610b807c738c9e3baab Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Wed, 7 Aug 2019 21:34:48 -0500 Subject: ARM: ep93xx: Mark expected switch fall-through Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: arm-ep93xx_defconfig arm): arch/arm/mach-ep93xx/crunch.c: In function 'crunch_do': arch/arm/mach-ep93xx/crunch.c:46:3: warning: this statement may fall through [-Wimplicit-fallthrough=] memset(crunch_state, 0, sizeof(*crunch_state)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-ep93xx/crunch.c:53:2: note: here case THREAD_NOTIFY_EXIT: ^~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: kbuild test robot Signed-off-by: Gustavo A. R. Silva --- arch/arm/mach-ep93xx/crunch.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-ep93xx/crunch.c b/arch/arm/mach-ep93xx/crunch.c index 1c9a4be8b503..1c05c5bf7e5c 100644 --- a/arch/arm/mach-ep93xx/crunch.c +++ b/arch/arm/mach-ep93xx/crunch.c @@ -49,6 +49,7 @@ static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t) * FALLTHROUGH: Ensure we don't try to overwrite our newly * initialised state information on the first fault. */ + /* Fall through */ case THREAD_NOTIFY_EXIT: crunch_task_release(thread); -- cgit From bfd77145f35c3deafe57e9eb67fff4ccffdaef6e Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 5 Aug 2019 15:11:15 -0700 Subject: Makefile: Convert -Wimplicit-fallthrough=3 to just -Wimplicit-fallthrough for clang A compilation -Wimplicit-fallthrough warning was enabled by commit a035d552a93b ("Makefile: Globally enable fall-through warning") Even though clang 10.0.0 does not currently support this warning without a patch, clang currently does not support a value for this option. Link: https://bugs.llvm.org/show_bug.cgi?id=39382 The gcc default for this warning is 3 so removing the =3 has no effect for gcc and enables the warning for patched versions of clang. Also remove the =3 from an existing use in a parisc Makefile: arch/parisc/math-emu/Makefile Signed-off-by: Joe Perches Reviewed-and-tested-by: Nathan Chancellor Cc: Gustavo A. R. Silva Signed-off-by: Linus Torvalds --- Makefile | 2 +- arch/parisc/math-emu/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 02aff718a11d..18a237743a02 100644 --- a/Makefile +++ b/Makefile @@ -846,7 +846,7 @@ NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) KBUILD_CFLAGS += -Wdeclaration-after-statement # Warn about unmarked fall-throughs in switch statement. -KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough=3,) +KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough,) # Variable Length Arrays (VLAs) should not be used anywhere in the kernel KBUILD_CFLAGS += -Wvla diff --git a/arch/parisc/math-emu/Makefile b/arch/parisc/math-emu/Makefile index 55c1396580a4..3747a0cbd3b8 100644 --- a/arch/parisc/math-emu/Makefile +++ b/arch/parisc/math-emu/Makefile @@ -18,4 +18,4 @@ obj-y := frnd.o driver.o decode_exc.o fpudispatch.o denormal.o \ # other very old or stripped-down PA-RISC CPUs -- not currently supported obj-$(CONFIG_MATH_EMULATION) += unimplemented-math-emulation.o -CFLAGS_REMOVE_fpudispatch.o = -Wimplicit-fallthrough=3 +CFLAGS_REMOVE_fpudispatch.o = -Wimplicit-fallthrough -- cgit From d45331b00ddb179e291766617259261c112db872 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 11 Aug 2019 13:26:41 -0700 Subject: Linux 5.3-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 18a237743a02..1b23f95db176 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 5 PATCHLEVEL = 3 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Bobtail Squid # *DOCUMENTATION* -- cgit