From b38213c6118b6b3fe163bd9acb7f723c379dd833 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 11 Jan 2022 18:50:17 +0100 Subject: dt-bindings: mfd: maxim,max77693: Convert to dtschema Convert the MFD part of Maxim MAX77693 MUIC to DT schema format. The example DTS was copied from existing DTS (exynos4412-midas.dtsi), so keep the license as GPL-2.0-only. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Rob Herring Signed-off-by: Lee Jones --- Documentation/devicetree/bindings/mfd/max77693.txt | 194 --------------------- .../devicetree/bindings/mfd/maxim,max77693.yaml | 143 +++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 144 insertions(+), 195 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/max77693.txt create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77693.yaml diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt deleted file mode 100644 index 1032df14498b..000000000000 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ /dev/null @@ -1,194 +0,0 @@ -Maxim MAX77693 multi-function device - -MAX77693 is a Multifunction device with the following submodules: -- PMIC, -- CHARGER, -- LED, -- MUIC, -- HAPTIC - -It is interfaced to host controller using i2c. -This document describes the bindings for the mfd device. - -Required properties: -- compatible : Must be "maxim,max77693". -- reg : Specifies the i2c slave address of PMIC block. -- interrupts : This i2c device has an IRQ line connected to the main SoC. - -Optional properties: -- regulators : The regulators of max77693 have to be instantiated under subnode - named "regulators" using the following format. - - regulators { - regulator-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER - standard regulator constraints[*]. - }; - - [*] refer Documentation/devicetree/bindings/regulator/regulator.txt - -- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide - users with tactile feedback. PWM period and duty-cycle are varied in - order to provide the appropriate level of feedback. - - Required properties: - - compatible : Must be "maxim,max77693-haptic" - - haptic-supply : power supply for the haptic motor - [*] refer Documentation/devicetree/bindings/regulator/regulator.txt - - pwms : phandle to the physical PWM(Pulse Width Modulation) device. - PWM properties should be named "pwms". And number of cell is different - for each pwm device. - To get more information, please refer to documentation. - [*] refer Documentation/devicetree/bindings/pwm/pwm.txt - -- charger : Node configuring the charger driver. - If present, required properties: - - compatible : Must be "maxim,max77693-charger". - - Optional properties (if not set, defaults will be used): - - maxim,constant-microvolt : Battery constant voltage in uV. The charger - will operate in fast charge constant current mode till battery voltage - reaches this level. Then the charger will switch to fast charge constant - voltage mode. Also vsys (system voltage) will be set to this value when - DC power is supplied but charger is not enabled. - Valid values: 3650000 - 4400000, step by 25000 (rounded down) - Default: 4200000 - - - maxim,min-system-microvolt : Minimal system voltage in uV. - Valid values: 3000000 - 3700000, step by 100000 (rounded down) - Default: 3600000 - - - maxim,thermal-regulation-celsius : Temperature in Celsius for entering - high temperature charging mode. If die temperature exceeds this value - the charging current will be reduced by 105 mA/Celsius. - Valid values: 70, 85, 100, 115 - Default: 100 - - - maxim,battery-overcurrent-microamp : Overcurrent protection threshold - in uA (current from battery to system). - Valid values: 2000000 - 3500000, step by 250000 (rounded down) - Default: 3500000 - - - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for - triggering input voltage regulation loop. If input voltage decreases - below this value, the input current will be reduced to reach the - threshold voltage. - Valid values: 4300000, 4700000, 4800000, 4900000 - Default: 4300000 - -- led : the LED submodule device node - -There are two LED outputs available - FLED1 and FLED2. Each of them can -control a separate LED or they can be connected together to double -the maximum current for a single connected LED. One LED is represented -by one child node. - -Required properties: -- compatible : Must be "maxim,max77693-led". - -Optional properties: -- maxim,boost-mode : - In boost mode the device can produce up to 1.2A of total current - on both outputs. The maximum current on each output is reduced - to 625mA then. If not enabled explicitly, boost setting defaults to - LEDS_BOOST_FIXED in case both current sources are used. - Possible values: - LEDS_BOOST_OFF (0) - no boost, - LEDS_BOOST_ADAPTIVE (1) - adaptive mode, - LEDS_BOOST_FIXED (2) - fixed mode. -- maxim,boost-mvout : Output voltage of the boost module in millivolts. - Valid values: 3300 - 5500, step by 25 (rounded down) - Default: 3300 -- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired - if chip estimates that system voltage could drop below this level due - to flash power consumption. - Valid values: 2400 - 3400, step by 33 (rounded down) - Default: 2400 - -Required properties for the LED child node: -- led-sources : see Documentation/devicetree/bindings/leds/common.txt; - device current output identifiers: 0 - FLED1, 1 - FLED2 -- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - Valid values for a LED connected to one FLED output: - 15625 - 250000, step by 15625 (rounded down) - Valid values for a LED connected to both FLED outputs: - 15625 - 500000, step by 15625 (rounded down) -- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - Valid values for a single LED connected to one FLED output - (boost mode must be turned off): - 15625 - 1000000, step by 15625 (rounded down) - Valid values for a single LED connected to both FLED outputs: - 15625 - 1250000, step by 15625 (rounded down) - Valid values for two LEDs case: - 15625 - 625000, step by 15625 (rounded down) -- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt - Valid values: 62500 - 1000000, step by 62500 (rounded down) - -Optional properties for the LED child node: -- label : see Documentation/devicetree/bindings/leds/common.txt - -Optional nodes: -- max77693-muic : - Node used only by extcon consumers. - Required properties: - - compatible : "maxim,max77693-muic" - -Example: -#include - - max77693@66 { - compatible = "maxim,max77693"; - reg = <0x66>; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - - regulators { - esafeout@1 { - regulator-compatible = "ESAFEOUT1"; - regulator-name = "ESAFEOUT1"; - regulator-boot-on; - }; - esafeout@2 { - regulator-compatible = "ESAFEOUT2"; - regulator-name = "ESAFEOUT2"; - }; - charger@0 { - regulator-compatible = "CHARGER"; - regulator-name = "CHARGER"; - regulator-min-microamp = <60000>; - regulator-max-microamp = <2580000>; - regulator-boot-on; - }; - }; - - haptic { - compatible = "maxim,max77693-haptic"; - haptic-supply = <&haptic_supply>; - pwms = <&pwm 0 40000 0>; - pwm-names = "haptic"; - }; - - charger { - compatible = "maxim,max77693-charger"; - - maxim,constant-microvolt = <4200000>; - maxim,min-system-microvolt = <3600000>; - maxim,thermal-regulation-celsius = <75>; - maxim,battery-overcurrent-microamp = <3000000>; - maxim,charge-input-threshold-microvolt = <4300000>; - }; - - led { - compatible = "maxim,max77693-led"; - maxim,boost-mode = ; - maxim,boost-mvout = <5000>; - maxim,mvsys-min = <2400>; - - camera_flash: flash-led { - label = "max77693-flash"; - led-sources = <0>, <1>; - led-max-microamp = <500000>; - flash-max-microamp = <1250000>; - flash-max-timeout-us = <1000000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml new file mode 100644 index 000000000000..906101197e11 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC + +maintainers: + - Chanwoo Choi + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX77693 is a MicroUSB and Companion Power Management IC which + includes voltage current regulators, charger, LED/flash, haptic motor driver + and MicroUSB management IC. + +properties: + compatible: + const: maxim,max77693 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + charger: + $ref: /schemas/power/supply/maxim,max77693.yaml + + led: + $ref: /schemas/leds/maxim,max77693.yaml + + max77693-muic: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-muic + + required: + - compatible + + motor-driver: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-haptic + + haptic-supply: + description: Power supply to the haptic motor + + pwms: + maxItems: 1 + + required: + - compatible + - haptic-supply + - pwms + + regulators: + $ref: ../regulator/maxim,max77693.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max77693"; + reg = <0x66>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + + regulators { + ESAFEOUT1 { + regulator-name = "ESAFEOUT1"; + }; + + ESAFEOUT2 { + regulator-name = "ESAFEOUT2"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + }; + }; + + motor-driver { + compatible = "maxim,max77693-haptic"; + haptic-supply = <&ldo26_reg>; + pwms = <&pwm 0 38022 0>; + }; + + charger { + compatible = "maxim,max77693-charger"; + + maxim,constant-microvolt = <4350000>; + maxim,min-system-microvolt = <3600000>; + maxim,thermal-regulation-celsius = <100>; + maxim,battery-overcurrent-microamp = <3500000>; + maxim,charge-input-threshold-microvolt = <4300000>; + }; + + led { + compatible = "maxim,max77693-led"; + maxim,boost-mode = ; + maxim,boost-mvout = <5000>; + maxim,mvsys-min = <2400>; + + flash-led { + label = "max77693-flash"; + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <0>, <1>; + led-max-microamp = <500000>; + flash-max-microamp = <1250000>; + flash-max-timeout-us = <1000000>; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 7e3a45578747..c336d0252370 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11721,9 +11721,9 @@ M: Bartlomiej Zolnierkiewicz L: linux-kernel@vger.kernel.org S: Supported F: Documentation/devicetree/bindings/*/maxim,max77686.yaml +F: Documentation/devicetree/bindings/*/maxim,max77693.yaml F: Documentation/devicetree/bindings/clock/maxim,max77686.txt F: Documentation/devicetree/bindings/mfd/max14577.txt -F: Documentation/devicetree/bindings/mfd/max77693.txt F: drivers/*/max14577*.c F: drivers/*/max77686*.c F: drivers/*/max77693*.c -- cgit