From b956575bed91ecfb136a8300742ecbbf451471ab Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Mon, 9 Oct 2017 09:50:49 -0700 Subject: x86/mm: Flush more aggressively in lazy TLB mode Since commit: 94b1b03b519b ("x86/mm: Rework lazy TLB mode and TLB freshness tracking") x86's lazy TLB mode has been all the way lazy: when running a kernel thread (including the idle thread), the kernel keeps using the last user mm's page tables without attempting to maintain user TLB coherence at all. From a pure semantic perspective, this is fine -- kernel threads won't attempt to access user pages, so having stale TLB entries doesn't matter. Unfortunately, I forgot about a subtlety. By skipping TLB flushes, we also allow any paging-structure caches that may exist on the CPU to become incoherent. This means that we can have a paging-structure cache entry that references a freed page table, and the CPU is within its rights to do a speculative page walk starting at the freed page table. I can imagine this causing two different problems: - A speculative page walk starting from a bogus page table could read IO addresses. I haven't seen any reports of this causing problems. - A speculative page walk that involves a bogus page table can install garbage in the TLB. Such garbage would always be at a user VA, but some AMD CPUs have logic that triggers a machine check when it notices these bogus entries. I've seen a couple reports of this. Boris further explains the failure mode: > It is actually more of an optimization which assumes that paging-structure > entries are in WB DRAM: > > "TlbCacheDis: cacheable memory disable. Read-write. 0=Enables > performance optimization that assumes PML4, PDP, PDE, and PTE entries > are in cacheable WB-DRAM; memory type checks may be bypassed, and > addresses outside of WB-DRAM may result in undefined behavior or NB > protocol errors. 1=Disables performance optimization and allows PML4, > PDP, PDE and PTE entries to be in any memory type. Operating systems > that maintain page tables in memory types other than WB- DRAM must set > TlbCacheDis to insure proper operation." > > The MCE generated is an NB protocol error to signal that > > "Link: A specific coherent-only packet from a CPU was issued to an > IO link. This may be caused by software which addresses page table > structures in a memory type other than cacheable WB-DRAM without > properly configuring MSRC001_0015[TlbCacheDis]. This may occur, for > example, when page table structure addresses are above top of memory. In > such cases, the NB will generate an MCE if it sees a mismatch between > the memory operation generated by the core and the link type." > > I'm assuming coherent-only packets don't go out on IO links, thus the > error. To fix this, reinstate TLB coherence in lazy mode. With this patch applied, we do it in one of two ways: - If we have PCID, we simply switch back to init_mm's page tables when we enter a kernel thread -- this seems to be quite cheap except for the cost of serializing the CPU. - If we don't have PCID, then we set a flag and switch to init_mm the first time we would otherwise need to flush the TLB. The /sys/kernel/debug/x86/tlb_use_lazy_mode debug switch can be changed to override the default mode for benchmarking. In theory, we could optimize this better by only flushing the TLB in lazy CPUs when a page table is freed. Doing that would require auditing the mm code to make sure that all page table freeing goes through tlb_remove_page() as well as reworking some data structures to implement the improved flush logic. Reported-by: Markus Trippelsdorf Reported-by: Adam Borowski Signed-off-by: Andy Lutomirski Signed-off-by: Borislav Petkov Cc: Borislav Petkov Cc: Brian Gerst Cc: Daniel Borkmann Cc: Eric Biggers Cc: Johannes Hirte Cc: Kees Cook Cc: Kirill A. Shutemov Cc: Linus Torvalds Cc: Nadav Amit Cc: Peter Zijlstra Cc: Rik van Riel Cc: Roman Kagan Cc: Thomas Gleixner Fixes: 94b1b03b519b ("x86/mm: Rework lazy TLB mode and TLB freshness tracking") Link: http://lkml.kernel.org/r/20171009170231.fkpraqokz6e4zeco@pd.tnic Signed-off-by: Ingo Molnar --- arch/x86/include/asm/mmu_context.h | 8 +- arch/x86/include/asm/tlbflush.h | 24 ++++++ arch/x86/mm/tlb.c | 153 +++++++++++++++++++++++++++---------- 3 files changed, 136 insertions(+), 49 deletions(-) diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h index c120b5db178a..3c856a15b98e 100644 --- a/arch/x86/include/asm/mmu_context.h +++ b/arch/x86/include/asm/mmu_context.h @@ -126,13 +126,7 @@ static inline void switch_ldt(struct mm_struct *prev, struct mm_struct *next) DEBUG_LOCKS_WARN_ON(preemptible()); } -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ - int cpu = smp_processor_id(); - - if (cpumask_test_cpu(cpu, mm_cpumask(mm))) - cpumask_clear_cpu(cpu, mm_cpumask(mm)); -} +void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk); static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h index 4893abf7f74f..d362161d3291 100644 --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -82,6 +82,13 @@ static inline u64 inc_mm_tlb_gen(struct mm_struct *mm) #define __flush_tlb_single(addr) __native_flush_tlb_single(addr) #endif +/* + * If tlb_use_lazy_mode is true, then we try to avoid switching CR3 to point + * to init_mm when we switch to a kernel thread (e.g. the idle thread). If + * it's false, then we immediately switch CR3 when entering a kernel thread. + */ +DECLARE_STATIC_KEY_TRUE(tlb_use_lazy_mode); + /* * 6 because 6 should be plenty and struct tlb_state will fit in * two cache lines. @@ -104,6 +111,23 @@ struct tlb_state { u16 loaded_mm_asid; u16 next_asid; + /* + * We can be in one of several states: + * + * - Actively using an mm. Our CPU's bit will be set in + * mm_cpumask(loaded_mm) and is_lazy == false; + * + * - Not using a real mm. loaded_mm == &init_mm. Our CPU's bit + * will not be set in mm_cpumask(&init_mm) and is_lazy == false. + * + * - Lazily using a real mm. loaded_mm != &init_mm, our bit + * is set in mm_cpumask(loaded_mm), but is_lazy == true. + * We're heuristically guessing that the CR3 load we + * skipped more than makes up for the overhead added by + * lazy mode. + */ + bool is_lazy; + /* * Access to this CR4 shadow and to H/W CR4 is protected by * disabling interrupts when modifying either one. diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c index 49d9778376d7..658bf0090565 100644 --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -30,6 +30,8 @@ atomic64_t last_mm_ctx_id = ATOMIC64_INIT(1); +DEFINE_STATIC_KEY_TRUE(tlb_use_lazy_mode); + static void choose_new_asid(struct mm_struct *next, u64 next_tlb_gen, u16 *new_asid, bool *need_flush) { @@ -80,7 +82,7 @@ void leave_mm(int cpu) return; /* Warn if we're not lazy. */ - WARN_ON(cpumask_test_cpu(smp_processor_id(), mm_cpumask(loaded_mm))); + WARN_ON(!this_cpu_read(cpu_tlbstate.is_lazy)); switch_mm(NULL, &init_mm, NULL); } @@ -142,45 +144,24 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next, __flush_tlb_all(); } #endif + this_cpu_write(cpu_tlbstate.is_lazy, false); if (real_prev == next) { VM_BUG_ON(this_cpu_read(cpu_tlbstate.ctxs[prev_asid].ctx_id) != next->context.ctx_id); - if (cpumask_test_cpu(cpu, mm_cpumask(next))) { - /* - * There's nothing to do: we weren't lazy, and we - * aren't changing our mm. We don't need to flush - * anything, nor do we need to update CR3, CR4, or - * LDTR. - */ - return; - } - - /* Resume remote flushes and then read tlb_gen. */ - cpumask_set_cpu(cpu, mm_cpumask(next)); - next_tlb_gen = atomic64_read(&next->context.tlb_gen); - - if (this_cpu_read(cpu_tlbstate.ctxs[prev_asid].tlb_gen) < - next_tlb_gen) { - /* - * Ideally, we'd have a flush_tlb() variant that - * takes the known CR3 value as input. This would - * be faster on Xen PV and on hypothetical CPUs - * on which INVPCID is fast. - */ - this_cpu_write(cpu_tlbstate.ctxs[prev_asid].tlb_gen, - next_tlb_gen); - write_cr3(build_cr3(next, prev_asid)); - trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, - TLB_FLUSH_ALL); - } - /* - * We just exited lazy mode, which means that CR4 and/or LDTR - * may be stale. (Changes to the required CR4 and LDTR states - * are not reflected in tlb_gen.) + * We don't currently support having a real mm loaded without + * our cpu set in mm_cpumask(). We have all the bookkeeping + * in place to figure out whether we would need to flush + * if our cpu were cleared in mm_cpumask(), but we don't + * currently use it. */ + if (WARN_ON_ONCE(real_prev != &init_mm && + !cpumask_test_cpu(cpu, mm_cpumask(next)))) + cpumask_set_cpu(cpu, mm_cpumask(next)); + + return; } else { u16 new_asid; bool need_flush; @@ -199,10 +180,9 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next, } /* Stop remote flushes for the previous mm */ - if (cpumask_test_cpu(cpu, mm_cpumask(real_prev))) - cpumask_clear_cpu(cpu, mm_cpumask(real_prev)); - - VM_WARN_ON_ONCE(cpumask_test_cpu(cpu, mm_cpumask(next))); + VM_WARN_ON_ONCE(!cpumask_test_cpu(cpu, mm_cpumask(real_prev)) && + real_prev != &init_mm); + cpumask_clear_cpu(cpu, mm_cpumask(real_prev)); /* * Start remote flushes and then read tlb_gen. @@ -232,6 +212,37 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next, switch_ldt(real_prev, next); } +/* + * enter_lazy_tlb() is a hint from the scheduler that we are entering a + * kernel thread or other context without an mm. Acceptable implementations + * include doing nothing whatsoever, switching to init_mm, or various clever + * lazy tricks to try to minimize TLB flushes. + * + * The scheduler reserves the right to call enter_lazy_tlb() several times + * in a row. It will notify us that we're going back to a real mm by + * calling switch_mm_irqs_off(). + */ +void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ + if (this_cpu_read(cpu_tlbstate.loaded_mm) == &init_mm) + return; + + if (static_branch_unlikely(&tlb_use_lazy_mode)) { + /* + * There's a significant optimization that may be possible + * here. We have accurate enough TLB flush tracking that we + * don't need to maintain coherence of TLB per se when we're + * lazy. We do, however, need to maintain coherence of + * paging-structure caches. We could, in principle, leave our + * old mm loaded and only switch to init_mm when + * tlb_remove_page() happens. + */ + this_cpu_write(cpu_tlbstate.is_lazy, true); + } else { + switch_mm(NULL, &init_mm, NULL); + } +} + /* * Call this when reinitializing a CPU. It fixes the following potential * problems: @@ -303,16 +314,20 @@ static void flush_tlb_func_common(const struct flush_tlb_info *f, /* This code cannot presently handle being reentered. */ VM_WARN_ON(!irqs_disabled()); + if (unlikely(loaded_mm == &init_mm)) + return; + VM_WARN_ON(this_cpu_read(cpu_tlbstate.ctxs[loaded_mm_asid].ctx_id) != loaded_mm->context.ctx_id); - if (!cpumask_test_cpu(smp_processor_id(), mm_cpumask(loaded_mm))) { + if (this_cpu_read(cpu_tlbstate.is_lazy)) { /* - * We're in lazy mode -- don't flush. We can get here on - * remote flushes due to races and on local flushes if a - * kernel thread coincidentally flushes the mm it's lazily - * still using. + * We're in lazy mode. We need to at least flush our + * paging-structure cache to avoid speculatively reading + * garbage into our TLB. Since switching to init_mm is barely + * slower than a minimal flush, just switch to init_mm. */ + switch_mm_irqs_off(NULL, &init_mm, NULL); return; } @@ -611,3 +626,57 @@ static int __init create_tlb_single_page_flush_ceiling(void) return 0; } late_initcall(create_tlb_single_page_flush_ceiling); + +static ssize_t tlblazy_read_file(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + char buf[2]; + + buf[0] = static_branch_likely(&tlb_use_lazy_mode) ? '1' : '0'; + buf[1] = '\n'; + + return simple_read_from_buffer(user_buf, count, ppos, buf, 2); +} + +static ssize_t tlblazy_write_file(struct file *file, + const char __user *user_buf, size_t count, loff_t *ppos) +{ + bool val; + + if (kstrtobool_from_user(user_buf, count, &val)) + return -EINVAL; + + if (val) + static_branch_enable(&tlb_use_lazy_mode); + else + static_branch_disable(&tlb_use_lazy_mode); + + return count; +} + +static const struct file_operations fops_tlblazy = { + .read = tlblazy_read_file, + .write = tlblazy_write_file, + .llseek = default_llseek, +}; + +static int __init init_tlb_use_lazy_mode(void) +{ + if (boot_cpu_has(X86_FEATURE_PCID)) { + /* + * Heuristic: with PCID on, switching to and from + * init_mm is reasonably fast, but remote flush IPIs + * as expensive as ever, so turn off lazy TLB mode. + * + * We can't do this in setup_pcid() because static keys + * haven't been initialized yet, and it would blow up + * badly. + */ + static_branch_disable(&tlb_use_lazy_mode); + } + + debugfs_create_file("tlb_use_lazy_mode", S_IRUSR | S_IWUSR, + arch_debugfs_dir, NULL, &fops_tlblazy); + return 0; +} +late_initcall(init_tlb_use_lazy_mode); -- cgit