From b984d7b56dfcf71648102e227120bdc247562d00 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Wed, 15 Mar 2023 14:55:09 +0100 Subject: MIPS: sibyte: Remove unused config option SIBYTE_BCM1x55 SIBYTE_BCM1x55 is not selected anywhere, so let's get rid of it. Signed-off-by: Thomas Bogendoerfer --- arch/mips/Kbuild.platforms | 1 - arch/mips/sibyte/Kconfig | 13 +------------ arch/mips/sibyte/Makefile | 2 -- arch/mips/sibyte/Platform | 4 ---- arch/mips/sibyte/common/bus_watcher.c | 4 ++-- arch/mips/sibyte/common/cfe.c | 2 +- arch/mips/sibyte/common/sb_tbprof.c | 10 +++++----- arch/mips/sibyte/swarm/setup.c | 6 +++--- 8 files changed, 12 insertions(+), 30 deletions(-) diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms index 5d04438ee12e..caad195ba5c1 100644 --- a/arch/mips/Kbuild.platforms +++ b/arch/mips/Kbuild.platforms @@ -29,7 +29,6 @@ platform-$(CONFIG_SGI_IP30) += sgi-ip30/ platform-$(CONFIG_SGI_IP32) += sgi-ip32/ platform-$(CONFIG_SIBYTE_BCM112X) += sibyte/ platform-$(CONFIG_SIBYTE_SB1250) += sibyte/ -platform-$(CONFIG_SIBYTE_BCM1x55) += sibyte/ platform-$(CONFIG_SIBYTE_BCM1x80) += sibyte/ platform-$(CONFIG_SNI_RM) += sni/ platform-$(CONFIG_MACH_TX49XX) += txx9/ diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig index 470d46183677..c437bc02dd08 100644 --- a/arch/mips/sibyte/Kconfig +++ b/arch/mips/sibyte/Kconfig @@ -58,16 +58,6 @@ config SIBYTE_BCM1x80 select SIBYTE_SB1xxx_SOC select SYS_SUPPORTS_SMP -config SIBYTE_BCM1x55 - bool - select CEVT_BCM1480 - select CSRC_BCM1480 - select HAVE_PCI - select IRQ_MIPS_CPU - select SIBYTE_SB1xxx_SOC - select SIBYTE_HAS_ZBUS_PROFILING - select SYS_SUPPORTS_SMP - config SIBYTE_SB1xxx_SOC bool select IRQ_MIPS_CPU @@ -143,8 +133,7 @@ config SIBYTE_CFE_CONSOLE config SIBYTE_BUS_WATCHER bool "Support for Bus Watcher statistics" depends on SIBYTE_SB1xxx_SOC && \ - (SIBYTE_BCM112X || SIBYTE_SB1250 || \ - SIBYTE_BCM1x55 || SIBYTE_BCM1x80) + (SIBYTE_BCM112X || SIBYTE_SB1250 || SIBYTE_BCM1x80) help Handle and keep statistics on the bus error interrupts (COR_ECC, BAD_ECC, IO_BUS). diff --git a/arch/mips/sibyte/Makefile b/arch/mips/sibyte/Makefile index d015c4d79c3e..ca0d57824d56 100644 --- a/arch/mips/sibyte/Makefile +++ b/arch/mips/sibyte/Makefile @@ -6,8 +6,6 @@ obj-$(CONFIG_SIBYTE_BCM112X) += sb1250/ obj-$(CONFIG_SIBYTE_BCM112X) += common/ obj-$(CONFIG_SIBYTE_SB1250) += sb1250/ obj-$(CONFIG_SIBYTE_SB1250) += common/ -obj-$(CONFIG_SIBYTE_BCM1x55) += bcm1480/ -obj-$(CONFIG_SIBYTE_BCM1x55) += common/ obj-$(CONFIG_SIBYTE_BCM1x80) += bcm1480/ obj-$(CONFIG_SIBYTE_BCM1x80) += common/ diff --git a/arch/mips/sibyte/Platform b/arch/mips/sibyte/Platform index 65b2225b76b2..304b4d16dfbf 100644 --- a/arch/mips/sibyte/Platform +++ b/arch/mips/sibyte/Platform @@ -13,10 +13,6 @@ cflags-$(CONFIG_SIBYTE_SB1250) += \ -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL -cflags-$(CONFIG_SIBYTE_BCM1x55) += \ - -I$(srctree)/arch/mips/include/asm/mach-sibyte \ - -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL - cflags-$(CONFIG_SIBYTE_BCM1x80) += \ -I$(srctree)/arch/mips/include/asm/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL diff --git a/arch/mips/sibyte/common/bus_watcher.c b/arch/mips/sibyte/common/bus_watcher.c index d43291473f76..a296d2c51841 100644 --- a/arch/mips/sibyte/common/bus_watcher.c +++ b/arch/mips/sibyte/common/bus_watcher.c @@ -24,7 +24,7 @@ #include #include #include -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#ifdef CONFIG_SIBYTE_BCM1x80 #include #endif @@ -71,7 +71,7 @@ void check_bus_watcher(void) #if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250) /* Use non-destructive register */ status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS_DEBUG)); -#elif defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#elif defined(CONFIG_SIBYTE_BCM1x80) /* Use non-destructive register */ /* Same as 1250 except BUS_ERR_STATUS_DEBUG is in a different place. */ status = csr_in32(IOADDR(A_BCM1480_BUS_ERR_STATUS_DEBUG)); diff --git a/arch/mips/sibyte/common/cfe.c b/arch/mips/sibyte/common/cfe.c index 2503f60271e8..2cb90dbbe843 100644 --- a/arch/mips/sibyte/common/cfe.c +++ b/arch/mips/sibyte/common/cfe.c @@ -295,7 +295,7 @@ void __init prom_init(void) #if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250) register_smp_ops(&sb_smp_ops); #endif -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#ifdef CONFIG_SIBYTE_BCM1x80 register_smp_ops(&bcm1480_smp_ops); #endif } diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c index bc47681e825a..004a08469a39 100644 --- a/arch/mips/sibyte/common/sb_tbprof.c +++ b/arch/mips/sibyte/common/sb_tbprof.c @@ -23,7 +23,7 @@ #include #include -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#ifdef CONFIG_SIBYTE_BCM1x80 #include #include #include @@ -35,7 +35,7 @@ #error invalid SiByte UART configuration #endif -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#ifdef CONFIG_SIBYTE_BCM1x80 #undef K_INT_TRACE_FREEZE #define K_INT_TRACE_FREEZE K_BCM1480_INT_TRACE_FREEZE #undef K_INT_PERF_CNT @@ -157,7 +157,7 @@ static void arm_tb(void) * a previous interrupt request. This means that bus profiling * requires ALL of the SCD perf counters. */ -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#ifdef CONFIG_SIBYTE_BCM1x80 __raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | /* keep counters 0,2,3,4,5,6,7 as is */ V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */ @@ -290,7 +290,7 @@ static int sbprof_zbprof_start(struct file *filp) * pass them through. I am exploiting my knowledge that * cp0_status masks out IP[5]. krw */ -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#ifdef CONFIG_SIBYTE_BCM1x80 __raw_writeq(K_BCM1480_INT_MAP_I3, IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + ((K_BCM1480_INT_PERF_CNT & 0x3f) << 3))); @@ -343,7 +343,7 @@ static int sbprof_zbprof_start(struct file *filp) __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7)); /* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */ -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#ifdef CONFIG_SIBYTE_BCM1x80 __raw_writeq(1ULL << (K_BCM1480_INT_PERF_CNT & 0x3f), IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_TRACE_L))); #else diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index 72a31eeeebba..9e7a1e305f61 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -24,7 +24,7 @@ #include #include #include -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#ifdef CONFIG_SIBYTE_BCM1x80 #include #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) #include @@ -34,7 +34,7 @@ #include #include -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#ifdef CONFIG_SIBYTE_BCM1x80 extern void bcm1480_setup(void); #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) extern void sb1250_setup(void); @@ -114,7 +114,7 @@ int update_persistent_clock64(struct timespec64 now) void __init plat_mem_setup(void) { -#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#ifdef CONFIG_SIBYTE_BCM1x80 bcm1480_setup(); #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) sb1250_setup(); -- cgit