From 5e549a0c18fc0321c18e7b6842cb7afc90aab396 Mon Sep 17 00:00:00 2001 From: Petr Kulhavy Date: Mon, 3 Oct 2016 16:40:49 +0200 Subject: ASoC: tas571x: wait 50ms after oscillator trim Wait extra 50ms after writing the oscillator trim register in probe(), as recommended by the TAS5721 and TAS5711 datasheets. Signed-off-by: Petr Kulhavy Signed-off-by: Mark Brown --- sound/soc/codecs/tas571x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index df5e5cb33baa..de65ecf534af 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -754,6 +754,7 @@ static int tas571x_i2c_probe(struct i2c_client *client, if (ret) return ret; + usleep_range(50000, 60000); memcpy(&priv->codec_driver, &tas571x_codec, sizeof(priv->codec_driver)); priv->codec_driver.component_driver.controls = priv->chip->controls; -- cgit From 960695670502afa153c2294e15ca790dbe086f4d Mon Sep 17 00:00:00 2001 From: Petr Kulhavy Date: Mon, 3 Oct 2016 16:40:50 +0200 Subject: ASoC: tas571x: move mixer volume controls from TAS5711 to TAS5717 Channel 1 and 2 Mixer Volume controls (registers 0x72/0x73 and 0x76/0x77) were wrongly assigned to tas5711_controls in commit f252d2346022 ("ASoC: tas571x: add input channel mixer for TAS5717/19") Therefore move them to tas5717_controls. Signed-off-by: Petr Kulhavy Signed-off-by: Mark Brown --- sound/soc/codecs/tas571x.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index de65ecf534af..34e4ce6f23d8 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -401,16 +401,6 @@ static const struct snd_kcontrol_new tas5711_controls[] = { TAS571X_SOFT_MUTE_REG, TAS571X_SOFT_MUTE_CH1_SHIFT, TAS571X_SOFT_MUTE_CH2_SHIFT, 1, 1), - - SOC_DOUBLE_R_RANGE("CH1 Mixer Volume", - TAS5717_CH1_LEFT_CH_MIX_REG, - TAS5717_CH1_RIGHT_CH_MIX_REG, - 16, 0, 0x80, 0), - - SOC_DOUBLE_R_RANGE("CH2 Mixer Volume", - TAS5717_CH2_LEFT_CH_MIX_REG, - TAS5717_CH2_RIGHT_CH_MIX_REG, - 16, 0, 0x80, 0), }; static const struct regmap_range tas571x_readonly_regs_range[] = { @@ -488,6 +478,16 @@ static const struct snd_kcontrol_new tas5717_controls[] = { TAS571X_SOFT_MUTE_CH1_SHIFT, TAS571X_SOFT_MUTE_CH2_SHIFT, 1, 1), + SOC_DOUBLE_R_RANGE("CH1 Mixer Volume", + TAS5717_CH1_LEFT_CH_MIX_REG, + TAS5717_CH1_RIGHT_CH_MIX_REG, + 16, 0, 0x80, 0), + + SOC_DOUBLE_R_RANGE("CH2 Mixer Volume", + TAS5717_CH2_LEFT_CH_MIX_REG, + TAS5717_CH2_RIGHT_CH_MIX_REG, + 16, 0, 0x80, 0), + /* * The biquads are named according to the register names. * Please note that TI's TAS57xx Graphical Development Environment -- cgit From e54de7f555970915c3856e7709a7ff74d352f315 Mon Sep 17 00:00:00 2001 From: Petr Kulhavy Date: Mon, 3 Oct 2016 16:40:47 +0200 Subject: ASoC: tas571x: extend the t_i2c time to comply with TAS5721 TAS5721 datasheet recommends to wait at least 13.5ms after deasserting the RESET signal. For TAS5717 this time is only 12ms, which was the original value in the code. Extend the wait time after deasserting RESET from 12 to 13.5ms to comply with the TAS5721 specification. Signed-off-by: Petr Kulhavy Signed-off-by: Mark Brown --- sound/soc/codecs/tas571x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index 34e4ce6f23d8..512b9e663e89 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -747,7 +747,7 @@ static int tas571x_i2c_probe(struct i2c_client *client, /* pulse the active low reset line for ~100us */ usleep_range(100, 200); gpiod_set_value(priv->reset_gpio, 0); - usleep_range(12000, 20000); + usleep_range(13500, 20000); } ret = regmap_write(priv->regmap, TAS571X_OSC_TRIM_REG, 0); -- cgit From 8b0678dc914271e9ad4317fe82555ead92ce1cb9 Mon Sep 17 00:00:00 2001 From: Petr Kulhavy Date: Mon, 3 Oct 2016 16:40:48 +0200 Subject: ASoC: tas571x: remove improper PDN signal usage in set_bias_level The set_bias_level toggles the PDN signal when entering SND_SOC_BIAS_STANDBY and SND_SOC_BIAS_OFF. However this has no effect and actually breaks things down (tested with TAS5717) due to the following reasons: 1) holding down PDN does not save power but holding down RST does 2) now hard mute via register 0x5 is implemented and therefore it is no longer needed to toggle PDN to enter all channel shut down 3) in order to leave PDN it is required to toggle the RST signal (see TAS5721 datasheet), which was not implemented 4) toggling PDN as implemented actually mutes PWMs and there is no audio output (tested on TAS5717) For these reasons remove the PDN signal toggling and just initialize it to inactive in probe(). Signed-off-by: Petr Kulhavy Signed-off-by: Mark Brown --- sound/soc/codecs/tas571x.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index 512b9e663e89..810369f687d7 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -341,20 +341,9 @@ static int tas571x_set_bias_level(struct snd_soc_codec *codec, return ret; } } - - gpiod_set_value(priv->pdn_gpio, 0); - usleep_range(5000, 6000); - - regcache_cache_only(priv->regmap, false); - ret = regcache_sync(priv->regmap); - if (ret) - return ret; } break; case SND_SOC_BIAS_OFF: - regcache_cache_only(priv->regmap, true); - gpiod_set_value(priv->pdn_gpio, 1); - if (!IS_ERR(priv->mclk)) clk_disable_unprepare(priv->mclk); break; @@ -771,9 +760,6 @@ static int tas571x_i2c_probe(struct i2c_client *client, return ret; } - regcache_cache_only(priv->regmap, true); - gpiod_set_value(priv->pdn_gpio, 1); - return snd_soc_register_codec(&client->dev, &priv->codec_driver, &tas571x_dai, 1); } -- cgit From 0dcfc487e521ab2d7da5c512d74337c6e706855e Mon Sep 17 00:00:00 2001 From: Sathyanarayana Nujella Date: Tue, 4 Oct 2016 10:33:20 -0700 Subject: ASoC: Intel: report JACK_LINEOUT event This patch updates Jack type bitmask to include SND_JACK_LINEOUT while creating a new jack, so that LINEOUT events are reported properly. Signed-off-by: Sathyanarayana Nujella Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/boards/bxt_da7219_max98357a.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/boards/bxt_da7219_max98357a.c b/sound/soc/intel/boards/bxt_da7219_max98357a.c index 3774b117d365..2c93fa26e13b 100644 --- a/sound/soc/intel/boards/bxt_da7219_max98357a.c +++ b/sound/soc/intel/boards/bxt_da7219_max98357a.c @@ -129,8 +129,8 @@ static int broxton_da7219_codec_init(struct snd_soc_pcm_runtime *rtd) */ ret = snd_soc_card_jack_new(rtd->card, "Headset Jack", SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 | - SND_JACK_BTN_2 | SND_JACK_BTN_3, &broxton_headset, - NULL, 0); + SND_JACK_BTN_2 | SND_JACK_BTN_3 | SND_JACK_LINEOUT, + &broxton_headset, NULL, 0); if (ret) { dev_err(rtd->dev, "Headset Jack creation failed: %d\n", ret); return ret; -- cgit From 7c45e3cc6a59fb00edea65dfb6d3ae60403e4539 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 26 Oct 2015 12:35:02 +0900 Subject: ASoC: topology: Reenable use from userspace We had inserted a #error into the topology UAPI code to ensure that the ABI was not adopted by userspace while final review and testing was ongoing. The idea was that some finishing touches would be made to the ABI before declaring it stable and suitable for use in production but this has not yet happened as more than a year later revisions to the ABI are still onging. The reality however is that people are shipping topology files in production and these ABI changes are causing practical issues for users and we can't break userspace. This makes this error pointless so we should remove it. Signed-off-by: Mark Brown Acked-by: Vinod Koul --- include/uapi/sound/asoc.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/include/uapi/sound/asoc.h b/include/uapi/sound/asoc.h index 33d00a4ce656..819d895edfdc 100644 --- a/include/uapi/sound/asoc.h +++ b/include/uapi/sound/asoc.h @@ -18,12 +18,6 @@ #include #include -#ifndef __KERNEL__ -#error This API is an early revision and not enabled in the current -#error kernel release, it will be enabled in a future kernel version -#error with incompatible changes to what is here. -#endif - /* * Maximum number of channels topology kcontrol can represent. */ -- cgit From c3474e211576fc88ddd1f3e8ce3b06a2051438e7 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 10 Oct 2016 14:33:20 +0200 Subject: ASoC: Intel: haswell depends on sst-firmware The Intel Haswell audio support fails to link if CONFIG_SND_SOC_INTEL_SST_FIRMWARE is disabled: sst-haswell-dsp.c: undefined reference to `sst_mem_block_register' sst-haswell-dsp.c: undefined reference to `sst_mem_block_unregister_all' sst-haswell-dsp.c: undefined reference to `sst_module_alloc_blocks' sst-haswell-dsp.c: undefined reference to `sst_module_free' sst-haswell-dsp.c: undefined reference to `sst_module_new' sst-haswell-pcm.c: undefined reference to `sst_module_get_from_id' sst-haswell-pcm.c: undefined reference to `sst_module_runtime_restore' sst-haswell-pcm.c: undefined reference to `sst_module_runtime_save' ERROR: "sst_block_alloc_scratch" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_block_free_scratch" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_copyfrom" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_copyto" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_get_channel" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_put_channel" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_free" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_get_offset" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_free_all" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_reload" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_unload" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_module_runtime_alloc_blocks" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_module_runtime_get_from_id" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_module_runtime_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! This moves the 'select' statement from two of the three haswell based users into the line that is used by all of them, so make it harder to get wrong and to fix the existing randconfig regressions. Fixes: 2d995e5dc283 ("ASoC: Intel: boards: Add bdw-rt5677 machine driver") Signed-off-by: Arnd Bergmann Signed-off-by: Mark Brown --- sound/soc/intel/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index a20c3dfbcb5d..54dec9161cef 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -46,6 +46,7 @@ config SND_SOC_INTEL_SST_MATCH config SND_SOC_INTEL_HASWELL tristate + select SND_SOC_INTEL_SST_FIRMWARE config SND_SOC_INTEL_BAYTRAIL tristate @@ -55,7 +56,6 @@ config SND_SOC_INTEL_HASWELL_MACH depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM depends on DW_DMAC_CORE select SND_SOC_INTEL_SST - select SND_SOC_INTEL_SST_FIRMWARE select SND_SOC_INTEL_HASWELL select SND_SOC_RT5640 help @@ -126,7 +126,6 @@ config SND_SOC_INTEL_BROADWELL_MACH I2C_DESIGNWARE_PLATFORM depends on DW_DMAC_CORE select SND_SOC_INTEL_SST - select SND_SOC_INTEL_SST_FIRMWARE select SND_SOC_INTEL_HASWELL select SND_SOC_RT286 help -- cgit From aa5f920993bda2095952177eea79bc8e58ae6065 Mon Sep 17 00:00:00 2001 From: murray foster Date: Sun, 9 Oct 2016 13:28:45 -0700 Subject: ASoC: cs4270: fix DAPM stream name mismatch Mismatching stream names in DAPM route and widget definitions are causing compilation errors. Fixing these names allows the cs4270 driver to compile and function. [Errors must be at probe time not compile time -- broonie] Signed-off-by: Murray Foster Acked-by: Paul Handrigan Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/cs4270.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 18baea2f7d65..84f86745c30e 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -148,11 +148,11 @@ SND_SOC_DAPM_OUTPUT("AOUTR"), }; static const struct snd_soc_dapm_route cs4270_dapm_routes[] = { - { "Capture", NULL, "AINA" }, - { "Capture", NULL, "AINB" }, + { "Capture", NULL, "AINL" }, + { "Capture", NULL, "AINR" }, - { "AOUTA", NULL, "Playback" }, - { "AOUTB", NULL, "Playback" }, + { "AOUTL", NULL, "Playback" }, + { "AOUTR", NULL, "Playback" }, }; /** -- cgit From c975e39ccadf6dc047356c60773a043a2293b8cd Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 13 Oct 2016 11:47:13 +0300 Subject: ASoC: rt5663: fix a debug statement We increment "i" before printing the debug statement. That makes it the wrong sleep_time[] information and Smatch complains that the last increment could be beyond the end of the array. Signed-off-by: Dan Carpenter Acked-by: Bard Liao Signed-off-by: Mark Brown --- sound/soc/codecs/rt5663.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c index 01a18d88f1eb..00ff2788879e 100644 --- a/sound/soc/codecs/rt5663.c +++ b/sound/soc/codecs/rt5663.c @@ -1547,11 +1547,11 @@ static int rt5663_jack_detect(struct snd_soc_codec *codec, int jack_insert) msleep(sleep_time[i]); val = snd_soc_read(codec, RT5663_EM_JACK_TYPE_2) & 0x0003; + dev_dbg(codec->dev, "%s: MX-00e7 val=%x sleep %d\n", + __func__, val, sleep_time[i]); i++; if (val == 0x1 || val == 0x2 || val == 0x3) break; - dev_dbg(codec->dev, "%s: MX-00e7 val=%x sleep %d\n", - __func__, val, sleep_time[i]); } dev_dbg(codec->dev, "%s val = %d\n", __func__, val); switch (val) { -- cgit From adf08d481b52824c87af028fc74dc692d179f7f4 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 13 Oct 2016 19:07:54 +0900 Subject: regmap: include from include/linux/regmap.h The readx_poll_timeout() macro calls usleep_range(), which is declared in . Make include/linux/regmap.h include , like include/linux/iopoll.h does. Otherwise, users of the macro will see "implicit declaration of function 'usleep_range'" error. Signed-off-by: Masahiro Yamada Signed-off-by: Mark Brown --- include/linux/regmap.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 9adc7b21903d..e5157e39ff22 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -15,6 +15,7 @@ #include #include +#include #include #include #include -- cgit From c58b84ee467bfd08b39fbda56757ba19ac50980a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 5 Oct 2016 06:46:49 -0300 Subject: [media] af9005: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/af9005.c | 319 +++++++++++++++++++++---------------- 1 file changed, 181 insertions(+), 138 deletions(-) diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c index efa782ed6e2d..b257780fb380 100644 --- a/drivers/media/usb/dvb-usb/af9005.c +++ b/drivers/media/usb/dvb-usb/af9005.c @@ -52,17 +52,16 @@ u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; struct af9005_device_state { u8 sequence; int led_state; + unsigned char data[256]; + struct mutex data_mutex; }; static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, int readwrite, int type, u8 * values, int len) { struct af9005_device_state *st = d->priv; - u8 obuf[16] = { 0 }; - u8 ibuf[17] = { 0 }; - u8 command; - int i; - int ret; + u8 command, seq; + int i, ret; if (len < 1) { err("generic read/write, less than 1 byte. Makes no sense."); @@ -73,16 +72,17 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, return -EINVAL; } - obuf[0] = 14; /* rest of buffer length low */ - obuf[1] = 0; /* rest of buffer length high */ + mutex_lock(&st->data_mutex); + st->data[0] = 14; /* rest of buffer length low */ + st->data[1] = 0; /* rest of buffer length high */ - obuf[2] = AF9005_REGISTER_RW; /* register operation */ - obuf[3] = 12; /* rest of buffer length */ + st->data[2] = AF9005_REGISTER_RW; /* register operation */ + st->data[3] = 12; /* rest of buffer length */ - obuf[4] = st->sequence++; /* sequence number */ + st->data[4] = seq = st->sequence++; /* sequence number */ - obuf[5] = (u8) (reg >> 8); /* register address */ - obuf[6] = (u8) (reg & 0xff); + st->data[5] = (u8) (reg >> 8); /* register address */ + st->data[6] = (u8) (reg & 0xff); if (type == AF9005_OFDM_REG) { command = AF9005_CMD_OFDM_REG; @@ -96,51 +96,52 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, command |= readwrite; if (readwrite == AF9005_CMD_WRITE) for (i = 0; i < len; i++) - obuf[8 + i] = values[i]; + st->data[8 + i] = values[i]; else if (type == AF9005_TUNER_REG) /* read command for tuner, the first byte contains the i2c address */ - obuf[8] = values[0]; - obuf[7] = command; + st->data[8] = values[0]; + st->data[7] = command; - ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 17, 0); + ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 17, 0); if (ret) - return ret; + goto ret; /* sanity check */ - if (ibuf[2] != AF9005_REGISTER_RW_ACK) { + if (st->data[2] != AF9005_REGISTER_RW_ACK) { err("generic read/write, wrong reply code."); - return -EIO; + ret = -EIO; + goto ret; } - if (ibuf[3] != 0x0d) { + if (st->data[3] != 0x0d) { err("generic read/write, wrong length in reply."); - return -EIO; + ret = -EIO; + goto ret; } - if (ibuf[4] != obuf[4]) { + if (st->data[4] != seq) { err("generic read/write, wrong sequence in reply."); - return -EIO; + ret = -EIO; + goto ret; } /* - Windows driver doesn't check these fields, in fact sometimes - the register in the reply is different that what has been sent - - if (ibuf[5] != obuf[5] || ibuf[6] != obuf[6]) { - err("generic read/write, wrong register in reply."); - return -EIO; - } - if (ibuf[7] != command) { - err("generic read/write wrong command in reply."); - return -EIO; - } + * In thesis, both input and output buffers should have + * identical values for st->data[5] to st->data[8]. + * However, windows driver doesn't check these fields, in fact + * sometimes the register in the reply is different that what + * has been sent */ - if (ibuf[16] != 0x01) { + if (st->data[16] != 0x01) { err("generic read/write wrong status code in reply."); - return -EIO; + ret = -EIO; + goto ret; } + if (readwrite == AF9005_CMD_READ) for (i = 0; i < len; i++) - values[i] = ibuf[8 + i]; + values[i] = st->data[8 + i]; - return 0; +ret: + mutex_unlock(&st->data_mutex); + return ret; } @@ -464,8 +465,7 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, struct af9005_device_state *st = d->priv; int ret, i, packet_len; - u8 buf[64]; - u8 ibuf[64]; + u8 seq; if (wlen < 0) { err("send command, wlen less than 0 bytes. Makes no sense."); @@ -480,94 +480,97 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, return -EINVAL; } packet_len = wlen + 5; - buf[0] = (u8) (packet_len & 0xff); - buf[1] = (u8) ((packet_len & 0xff00) >> 8); - - buf[2] = 0x26; /* packet type */ - buf[3] = wlen + 3; - buf[4] = st->sequence++; - buf[5] = command; - buf[6] = wlen; + + mutex_lock(&st->data_mutex); + + st->data[0] = (u8) (packet_len & 0xff); + st->data[1] = (u8) ((packet_len & 0xff00) >> 8); + + st->data[2] = 0x26; /* packet type */ + st->data[3] = wlen + 3; + st->data[4] = seq = st->sequence++; + st->data[5] = command; + st->data[6] = wlen; for (i = 0; i < wlen; i++) - buf[7 + i] = wbuf[i]; - ret = dvb_usb_generic_rw(d, buf, wlen + 7, ibuf, rlen + 7, 0); - if (ret) - return ret; - if (ibuf[2] != 0x27) { + st->data[7 + i] = wbuf[i]; + ret = dvb_usb_generic_rw(d, st->data, wlen + 7, st->data, rlen + 7, 0); + if (st->data[2] != 0x27) { err("send command, wrong reply code."); - return -EIO; - } - if (ibuf[4] != buf[4]) { + ret = -EIO; + } else if (st->data[4] != seq) { err("send command, wrong sequence in reply."); - return -EIO; - } - if (ibuf[5] != 0x01) { + ret = -EIO; + } else if (st->data[5] != 0x01) { err("send command, wrong status code in reply."); - return -EIO; - } - if (ibuf[6] != rlen) { + ret = -EIO; + } else if (st->data[6] != rlen) { err("send command, invalid data length in reply."); - return -EIO; + ret = -EIO; } - for (i = 0; i < rlen; i++) - rbuf[i] = ibuf[i + 7]; - return 0; + if (!ret) { + for (i = 0; i < rlen; i++) + rbuf[i] = st->data[i + 7]; + } + + mutex_unlock(&st->data_mutex); + return ret; } int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values, int len) { struct af9005_device_state *st = d->priv; - u8 obuf[16], ibuf[14]; + u8 seq; int ret, i; - memset(obuf, 0, sizeof(obuf)); - memset(ibuf, 0, sizeof(ibuf)); + mutex_lock(&st->data_mutex); - obuf[0] = 14; /* length of rest of packet low */ - obuf[1] = 0; /* length of rest of packer high */ + memset(st->data, 0, sizeof(st->data)); - obuf[2] = 0x2a; /* read/write eeprom */ + st->data[0] = 14; /* length of rest of packet low */ + st->data[1] = 0; /* length of rest of packer high */ - obuf[3] = 12; /* size */ + st->data[2] = 0x2a; /* read/write eeprom */ - obuf[4] = st->sequence++; + st->data[3] = 12; /* size */ - obuf[5] = 0; /* read */ + st->data[4] = seq = st->sequence++; - obuf[6] = len; - obuf[7] = address; - ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 14, 0); - if (ret) - return ret; - if (ibuf[2] != 0x2b) { + st->data[5] = 0; /* read */ + + st->data[6] = len; + st->data[7] = address; + ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 14, 0); + if (st->data[2] != 0x2b) { err("Read eeprom, invalid reply code"); - return -EIO; - } - if (ibuf[3] != 10) { + ret = -EIO; + } else if (st->data[3] != 10) { err("Read eeprom, invalid reply length"); - return -EIO; - } - if (ibuf[4] != obuf[4]) { + ret = -EIO; + } else if (st->data[4] != seq) { err("Read eeprom, wrong sequence in reply "); - return -EIO; - } - if (ibuf[5] != 1) { + ret = -EIO; + } else if (st->data[5] != 1) { err("Read eeprom, wrong status in reply "); - return -EIO; + ret = -EIO; } - for (i = 0; i < len; i++) { - values[i] = ibuf[6 + i]; + + if (!ret) { + for (i = 0; i < len; i++) + values[i] = st->data[6 + i]; } - return 0; + mutex_unlock(&st->data_mutex); + + return ret; } -static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply) +static int af9005_boot_packet(struct usb_device *udev, int type, u8 *reply, + u8 *buf, int size) { - u8 buf[FW_BULKOUT_SIZE + 2]; u16 checksum; int act_len, i, ret; - memset(buf, 0, sizeof(buf)); + + memset(buf, 0, size); buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff); switch (type) { @@ -720,15 +723,21 @@ static int af9005_download_firmware(struct usb_device *udev, const struct firmwa { int i, packets, ret, act_len; - u8 buf[FW_BULKOUT_SIZE + 2]; + u8 *buf; u8 reply; - ret = af9005_boot_packet(udev, FW_CONFIG, &reply); + buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf, + FW_BULKOUT_SIZE + 2); if (ret) - return ret; + goto err; if (reply != 0x01) { err("before downloading firmware, FW_CONFIG expected 0x01, received 0x%x", reply); - return -EIO; + ret = -EIO; + goto err; } packets = fw->size / FW_BULKOUT_SIZE; buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); @@ -743,28 +752,35 @@ static int af9005_download_firmware(struct usb_device *udev, const struct firmwa buf, FW_BULKOUT_SIZE + 2, &act_len, 1000); if (ret) { err("firmware download failed at packet %d with code %d", i, ret); - return ret; + goto err; } } - ret = af9005_boot_packet(udev, FW_CONFIRM, &reply); + ret = af9005_boot_packet(udev, FW_CONFIRM, &reply, + buf, FW_BULKOUT_SIZE + 2); if (ret) - return ret; + goto err; if (reply != (u8) (packets & 0xff)) { err("after downloading firmware, FW_CONFIRM expected 0x%x, received 0x%x", packets & 0xff, reply); - return -EIO; + ret = -EIO; + goto err; } - ret = af9005_boot_packet(udev, FW_BOOT, &reply); + ret = af9005_boot_packet(udev, FW_BOOT, &reply, buf, + FW_BULKOUT_SIZE + 2); if (ret) - return ret; - ret = af9005_boot_packet(udev, FW_CONFIG, &reply); + goto err; + ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf, + FW_BULKOUT_SIZE + 2); if (ret) - return ret; + goto err; if (reply != 0x02) { err("after downloading firmware, FW_CONFIG expected 0x02, received 0x%x", reply); - return -EIO; + ret = -EIO; + goto err; } - return 0; +err: + kfree(buf); + return ret; } @@ -823,53 +839,59 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) { struct af9005_device_state *st = d->priv; int ret, len; - - u8 obuf[5]; - u8 ibuf[256]; + u8 seq; *state = REMOTE_NO_KEY_PRESSED; if (rc_decode == NULL) { /* it shouldn't never come here */ return 0; } + + mutex_lock(&st->data_mutex); + /* deb_info("rc_query\n"); */ - obuf[0] = 3; /* rest of packet length low */ - obuf[1] = 0; /* rest of packet lentgh high */ - obuf[2] = 0x40; /* read remote */ - obuf[3] = 1; /* rest of packet length */ - obuf[4] = st->sequence++; /* sequence number */ - ret = dvb_usb_generic_rw(d, obuf, 5, ibuf, 256, 0); + st->data[0] = 3; /* rest of packet length low */ + st->data[1] = 0; /* rest of packet lentgh high */ + st->data[2] = 0x40; /* read remote */ + st->data[3] = 1; /* rest of packet length */ + st->data[4] = seq = st->sequence++; /* sequence number */ + ret = dvb_usb_generic_rw(d, st->data, 5, st->data, 256, 0); if (ret) { err("rc query failed"); - return ret; + goto ret; } - if (ibuf[2] != 0x41) { + if (st->data[2] != 0x41) { err("rc query bad header."); - return -EIO; - } - if (ibuf[4] != obuf[4]) { + ret = -EIO; + goto ret; + } else if (st->data[4] != seq) { err("rc query bad sequence."); - return -EIO; + ret = -EIO; + goto ret; } - len = ibuf[5]; + len = st->data[5]; if (len > 246) { err("rc query invalid length"); - return -EIO; + ret = -EIO; + goto ret; } if (len > 0) { deb_rc("rc data (%d) ", len); - debug_dump((ibuf + 6), len, deb_rc); - ret = rc_decode(d, &ibuf[6], len, event, state); + debug_dump((st->data + 6), len, deb_rc); + ret = rc_decode(d, &st->data[6], len, event, state); if (ret) { err("rc_decode failed"); - return ret; + goto ret; } else { deb_rc("rc_decode state %x event %x\n", *state, *event); if (*state == REMOTE_KEY_REPEAT) *event = d->last_event; } } - return 0; + +ret: + mutex_unlock(&st->data_mutex); + return ret; } static int af9005_power_ctrl(struct dvb_usb_device *d, int onoff) @@ -953,10 +975,16 @@ static int af9005_identify_state(struct usb_device *udev, int *cold) { int ret; - u8 reply; - ret = af9005_boot_packet(udev, FW_CONFIG, &reply); + u8 reply, *buf; + + buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = af9005_boot_packet(udev, FW_CONFIG, &reply, + buf, FW_BULKOUT_SIZE + 2); if (ret) - return ret; + goto err; deb_info("result of FW_CONFIG in identify state %d\n", reply); if (reply == 0x01) *cold = 1; @@ -965,7 +993,10 @@ static int af9005_identify_state(struct usb_device *udev, else return -EIO; deb_info("Identify state cold = %d\n", *cold); - return 0; + +err: + kfree(buf); + return ret; } static struct dvb_usb_device_properties af9005_properties; @@ -973,8 +1004,20 @@ static struct dvb_usb_device_properties af9005_properties; static int af9005_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf, &af9005_properties, - THIS_MODULE, NULL, adapter_nr); + struct dvb_usb_device *d; + struct af9005_device_state *st; + int ret; + + ret = dvb_usb_device_init(intf, &af9005_properties, + THIS_MODULE, &d, adapter_nr); + + if (ret < 0) + return ret; + + st = d->priv; + mutex_init(&st->data_mutex); + + return 0; } enum af9005_usb_table_entry { -- cgit From 5ef8ed0e5608f75805e41ef8abbe94a3597e6613 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 5 Oct 2016 06:02:19 -0300 Subject: [media] cinergyT2-core: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/cinergyT2-core.c | 84 ++++++++++++++++++++++-------- 1 file changed, 61 insertions(+), 23 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c index 9fd1527494eb..d85c0c4d4042 100644 --- a/drivers/media/usb/dvb-usb/cinergyT2-core.c +++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c @@ -41,6 +41,8 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); struct cinergyt2_state { u8 rc_counter; + unsigned char data[64]; + struct mutex data_mutex; }; /* We are missing a release hook with usb_device data */ @@ -50,33 +52,52 @@ static struct dvb_usb_device_properties cinergyt2_properties; static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable) { - char buf[] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 }; - char result[64]; - return dvb_usb_generic_rw(adap->dev, buf, sizeof(buf), result, - sizeof(result), 0); + struct dvb_usb_device *d = adap->dev; + struct cinergyt2_state *st = d->priv; + int ret; + + mutex_lock(&st->data_mutex); + st->data[0] = CINERGYT2_EP1_CONTROL_STREAM_TRANSFER; + st->data[1] = enable ? 1 : 0; + + ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 64, 0); + mutex_unlock(&st->data_mutex); + + return ret; } static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable) { - char buf[] = { CINERGYT2_EP1_SLEEP_MODE, enable ? 0 : 1 }; - char state[3]; - return dvb_usb_generic_rw(d, buf, sizeof(buf), state, sizeof(state), 0); + struct cinergyt2_state *st = d->priv; + int ret; + + mutex_lock(&st->data_mutex); + st->data[0] = CINERGYT2_EP1_SLEEP_MODE; + st->data[1] = enable ? 0 : 1; + + ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 3, 0); + mutex_unlock(&st->data_mutex); + + return ret; } static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) { - char query[] = { CINERGYT2_EP1_GET_FIRMWARE_VERSION }; - char state[3]; + struct dvb_usb_device *d = adap->dev; + struct cinergyt2_state *st = d->priv; int ret; adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev); - ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state, - sizeof(state), 0); + mutex_lock(&st->data_mutex); + st->data[0] = CINERGYT2_EP1_GET_FIRMWARE_VERSION; + + ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0); if (ret < 0) { deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep " "state info\n"); } + mutex_unlock(&st->data_mutex); /* Copy this pointer as we are gonna need it in the release phase */ cinergyt2_usb_device = adap->dev; @@ -141,13 +162,16 @@ static int repeatable_keys[] = { static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { struct cinergyt2_state *st = d->priv; - u8 key[5] = {0, 0, 0, 0, 0}, cmd = CINERGYT2_EP1_GET_RC_EVENTS; int i; *state = REMOTE_NO_KEY_PRESSED; - dvb_usb_generic_rw(d, &cmd, 1, key, sizeof(key), 0); - if (key[4] == 0xff) { + mutex_lock(&st->data_mutex); + st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS; + + dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); + + if (st->data[4] == 0xff) { /* key repeat */ st->rc_counter++; if (st->rc_counter > RC_REPEAT_DELAY) { @@ -157,31 +181,45 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) *event = d->last_event; deb_rc("repeat key, event %x\n", *event); - return 0; + goto ret; } } deb_rc("repeated key (non repeatable)\n"); } - return 0; + goto ret; } /* hack to pass checksum on the custom field */ - key[2] = ~key[1]; - dvb_usb_nec_rc_key_to_event(d, key, event, state); - if (key[0] != 0) { + st->data[2] = ~st->data[1]; + dvb_usb_nec_rc_key_to_event(d, st->data, event, state); + if (st->data[0] != 0) { if (*event != d->last_event) st->rc_counter = 0; - deb_rc("key: %*ph\n", 5, key); + deb_rc("key: %*ph\n", 5, st->data); } - return 0; + +ret: + mutex_unlock(&st->data_mutex); + return ret; } static int cinergyt2_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf, &cinergyt2_properties, - THIS_MODULE, NULL, adapter_nr); + struct dvb_usb_device *d; + struct cinergyt2_state *st; + int ret; + + ret = dvb_usb_device_init(intf, &cinergyt2_properties, + THIS_MODULE, &d, adapter_nr); + if (ret < 0) + return ret; + + st = d->priv; + mutex_init(&st->data_mutex); + + return 0; } -- cgit From 54d577a4c91ba5dfe634ddee26223bc9a39687a7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 13:54:33 -0300 Subject: [media] cinergyT2-core: handle error code on RC query There's no sense on decoding and generating a RC key code if there was an error on the URB control message. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/cinergyT2-core.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c index d85c0c4d4042..8ac825413d5a 100644 --- a/drivers/media/usb/dvb-usb/cinergyT2-core.c +++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c @@ -102,7 +102,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) /* Copy this pointer as we are gonna need it in the release phase */ cinergyt2_usb_device = adap->dev; - return 0; + return ret; } static struct rc_map_table rc_map_cinergyt2_table[] = { @@ -162,14 +162,16 @@ static int repeatable_keys[] = { static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { struct cinergyt2_state *st = d->priv; - int i; + int i, ret; *state = REMOTE_NO_KEY_PRESSED; mutex_lock(&st->data_mutex); st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS; - dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); + ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); + if (ret < 0) + goto ret; if (st->data[4] == 0xff) { /* key repeat */ -- cgit From c2730eef5fa180eec853f3775bebc4d74e6e6697 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 06:07:36 -0300 Subject: [media] cinergyT2-fe: cache stats at cinergyt2_fe_read_status() Instead of sending USB commands for every stats call, collect them once, when status is updated. As the frontend kthread will call it on every few seconds, the stats will still be collected. Besides reducing the amount of USB/I2C transfers, this also warrants that all stats will be collected at the same time, and makes easier to convert it to DVBv5 stats in the future. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/cinergyT2-fe.c | 48 +++++--------------------------- 1 file changed, 7 insertions(+), 41 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c index b3ec743a7a2e..fd8edcb56e61 100644 --- a/drivers/media/usb/dvb-usb/cinergyT2-fe.c +++ b/drivers/media/usb/dvb-usb/cinergyT2-fe.c @@ -139,6 +139,7 @@ static uint16_t compute_tps(struct dtv_frontend_properties *op) struct cinergyt2_fe_state { struct dvb_frontend fe; struct dvb_usb_device *d; + struct dvbt_get_status_msg status; }; static int cinergyt2_fe_read_status(struct dvb_frontend *fe, @@ -154,6 +155,8 @@ static int cinergyt2_fe_read_status(struct dvb_frontend *fe, if (ret < 0) return ret; + state->status = result; + *status = 0; if (0xffff - le16_to_cpu(result.gain) > 30) @@ -177,34 +180,16 @@ static int cinergyt2_fe_read_status(struct dvb_frontend *fe, static int cinergyt2_fe_read_ber(struct dvb_frontend *fe, u32 *ber) { struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_get_status_msg status; - char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; - int ret; - - ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, - sizeof(status), 0); - if (ret < 0) - return ret; - *ber = le32_to_cpu(status.viterbi_error_rate); + *ber = le32_to_cpu(state->status.viterbi_error_rate); return 0; } static int cinergyt2_fe_read_unc_blocks(struct dvb_frontend *fe, u32 *unc) { struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_get_status_msg status; - u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; - int ret; - ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&status, - sizeof(status), 0); - if (ret < 0) { - err("cinergyt2_fe_read_unc_blocks() Failed! (Error=%d)\n", - ret); - return ret; - } - *unc = le32_to_cpu(status.uncorrected_block_count); + *unc = le32_to_cpu(state->status.uncorrected_block_count); return 0; } @@ -212,35 +197,16 @@ static int cinergyt2_fe_read_signal_strength(struct dvb_frontend *fe, u16 *strength) { struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_get_status_msg status; - char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; - int ret; - ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, - sizeof(status), 0); - if (ret < 0) { - err("cinergyt2_fe_read_signal_strength() Failed!" - " (Error=%d)\n", ret); - return ret; - } - *strength = (0xffff - le16_to_cpu(status.gain)); + *strength = (0xffff - le16_to_cpu(state->status.gain)); return 0; } static int cinergyt2_fe_read_snr(struct dvb_frontend *fe, u16 *snr) { struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_get_status_msg status; - char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; - int ret; - ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, - sizeof(status), 0); - if (ret < 0) { - err("cinergyt2_fe_read_snr() Failed! (Error=%d)\n", ret); - return ret; - } - *snr = (status.snr << 8) | status.snr; + *snr = (state->status.snr << 8) | state->status.snr; return 0; } -- cgit From 0d43c0ff8b7e0a76136c602625efa5e6919baf9c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 06:16:59 -0300 Subject: [media] cinergyT2-fe: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/cinergyT2-fe.c | 56 +++++++++++++++++++------------- 1 file changed, 33 insertions(+), 23 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c index fd8edcb56e61..2d29b4174dba 100644 --- a/drivers/media/usb/dvb-usb/cinergyT2-fe.c +++ b/drivers/media/usb/dvb-usb/cinergyT2-fe.c @@ -139,6 +139,10 @@ static uint16_t compute_tps(struct dtv_frontend_properties *op) struct cinergyt2_fe_state { struct dvb_frontend fe; struct dvb_usb_device *d; + + unsigned char data[64]; + struct mutex data_mutex; + struct dvbt_get_status_msg status; }; @@ -146,28 +150,31 @@ static int cinergyt2_fe_read_status(struct dvb_frontend *fe, enum fe_status *status) { struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_get_status_msg result; - u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; int ret; - ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&result, - sizeof(result), 0); + mutex_lock(&state->data_mutex); + state->data[0] = CINERGYT2_EP1_GET_TUNER_STATUS; + + ret = dvb_usb_generic_rw(state->d, state->data, 1, + state->data, sizeof(state->status), 0); + if (!ret) + memcpy(&state->status, state->data, sizeof(state->status)); + mutex_unlock(&state->data_mutex); + if (ret < 0) return ret; - state->status = result; - *status = 0; - if (0xffff - le16_to_cpu(result.gain) > 30) + if (0xffff - le16_to_cpu(state->status.gain) > 30) *status |= FE_HAS_SIGNAL; - if (result.lock_bits & (1 << 6)) + if (state->status.lock_bits & (1 << 6)) *status |= FE_HAS_LOCK; - if (result.lock_bits & (1 << 5)) + if (state->status.lock_bits & (1 << 5)) *status |= FE_HAS_SYNC; - if (result.lock_bits & (1 << 4)) + if (state->status.lock_bits & (1 << 4)) *status |= FE_HAS_CARRIER; - if (result.lock_bits & (1 << 1)) + if (state->status.lock_bits & (1 << 1)) *status |= FE_HAS_VITERBI; if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != @@ -232,34 +239,36 @@ static int cinergyt2_fe_set_frontend(struct dvb_frontend *fe) { struct dtv_frontend_properties *fep = &fe->dtv_property_cache; struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_set_parameters_msg param; - char result[2]; + struct dvbt_set_parameters_msg *param; int err; - param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS; - param.tps = cpu_to_le16(compute_tps(fep)); - param.freq = cpu_to_le32(fep->frequency / 1000); - param.flags = 0; + mutex_lock(&state->data_mutex); + + param = (void *)state->data; + param->cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS; + param->tps = cpu_to_le16(compute_tps(fep)); + param->freq = cpu_to_le32(fep->frequency / 1000); + param->flags = 0; switch (fep->bandwidth_hz) { default: case 8000000: - param.bandwidth = 8; + param->bandwidth = 8; break; case 7000000: - param.bandwidth = 7; + param->bandwidth = 7; break; case 6000000: - param.bandwidth = 6; + param->bandwidth = 6; break; } - err = dvb_usb_generic_rw(state->d, - (char *)¶m, sizeof(param), - result, sizeof(result), 0); + err = dvb_usb_generic_rw(state->d, state->data, sizeof(*param), + state->data, 2, 0); if (err < 0) err("cinergyt2_fe_set_frontend() Failed! err=%d\n", err); + mutex_unlock(&state->data_mutex); return (err < 0) ? err : 0; } @@ -281,6 +290,7 @@ struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d) s->d = d; memcpy(&s->fe.ops, &cinergyt2_fe_ops, sizeof(struct dvb_frontend_ops)); s->fe.demodulator_priv = s; + mutex_init(&s->data_mutex); return &s->fe; } -- cgit From 17ce039b4e5405c49d8c0d64e6d781cc6f4dc1ac Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 06:30:27 -0300 Subject: [media] cxusb: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/cxusb.c | 62 ++++++++++++++++++++++----------------- drivers/media/usb/dvb-usb/cxusb.h | 6 ++++ 2 files changed, 41 insertions(+), 27 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index 907ac01ae297..39772812269d 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -45,9 +45,6 @@ #include "si2168.h" #include "si2157.h" -/* Max transfer size done by I2C transfer functions */ -#define MAX_XFER_SIZE 80 - /* debug */ static int dvb_usb_cxusb_debug; module_param_named(debug, dvb_usb_cxusb_debug, int, 0644); @@ -61,23 +58,27 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int cxusb_ctrl_msg(struct dvb_usb_device *d, u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen) { - int wo = (rbuf == NULL || rlen == 0); /* write-only */ - u8 sndbuf[MAX_XFER_SIZE]; + struct cxusb_state *st = d->priv; + int ret, wo; - if (1 + wlen > sizeof(sndbuf)) { - warn("i2c wr: len=%d is too big!\n", - wlen); + if (1 + wlen > MAX_XFER_SIZE) { + warn("i2c wr: len=%d is too big!\n", wlen); return -EOPNOTSUPP; } - memset(sndbuf, 0, 1+wlen); + wo = (rbuf == NULL || rlen == 0); /* write-only */ - sndbuf[0] = cmd; - memcpy(&sndbuf[1], wbuf, wlen); + mutex_lock(&st->data_mutex); + st->data[0] = cmd; + memcpy(&st->data[1], wbuf, wlen); if (wo) - return dvb_usb_generic_write(d, sndbuf, 1+wlen); + ret = dvb_usb_generic_write(d, st->data, 1 + wlen); else - return dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0); + ret = dvb_usb_generic_rw(d, st->data, 1 + wlen, + rbuf, rlen, 0); + + mutex_unlock(&st->data_mutex); + return ret; } /* GPIO */ @@ -1460,36 +1461,43 @@ static struct dvb_usb_device_properties cxusb_mygica_t230_properties; static int cxusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { + struct dvb_usb_device *d; + struct cxusb_state *st; + if (0 == dvb_usb_device_init(intf, &cxusb_medion_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgh064f_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dee1601_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgz201_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dtt7579_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_needsfirmware_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_rev2_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_mygica_t230_properties, - THIS_MODULE, NULL, adapter_nr) || - 0) + THIS_MODULE, &d, adapter_nr) || + 0) { + st = d->priv; + mutex_init(&st->data_mutex); + return 0; + } return -EINVAL; } diff --git a/drivers/media/usb/dvb-usb/cxusb.h b/drivers/media/usb/dvb-usb/cxusb.h index 527ff7905e15..9f3ee0e47d5c 100644 --- a/drivers/media/usb/dvb-usb/cxusb.h +++ b/drivers/media/usb/dvb-usb/cxusb.h @@ -28,10 +28,16 @@ #define CMD_ANALOG 0x50 #define CMD_DIGITAL 0x51 +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 80 + struct cxusb_state { u8 gpio_write_state[3]; struct i2c_client *i2c_client_demod; struct i2c_client *i2c_client_tuner; + + unsigned char data[MAX_XFER_SIZE]; + struct mutex data_mutex; }; #endif -- cgit From bd1f976cc95b0689f889c8d93434ee61dd09b08b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 06:40:24 -0300 Subject: [media] dib0700: be sure that dib0700_ctrl_rd() users can do DMA dib0700_ctrl_rd() takes a RX and a TX pointer. Be sure that both will point to a memory allocated via kmalloc(). Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dib0700_core.c | 4 +++- drivers/media/usb/dvb-usb/dib0700_devices.c | 25 +++++++++++++------------ 2 files changed, 16 insertions(+), 13 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c index f3196658fb70..515f89dba199 100644 --- a/drivers/media/usb/dvb-usb/dib0700_core.c +++ b/drivers/media/usb/dvb-usb/dib0700_core.c @@ -292,13 +292,15 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap, /* special thing in the current firmware: when length is zero the read-failed */ len = dib0700_ctrl_rd(d, st->buf, msg[i].len + 2, - msg[i+1].buf, msg[i+1].len); + st->buf, msg[i + 1].len); if (len <= 0) { deb_info("I2C read failed on address 0x%02x\n", msg[i].addr); break; } + memcpy(msg[i + 1].buf, st->buf, msg[i + 1].len); + msg[i+1].len = len; i++; diff --git a/drivers/media/usb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c index 0857b56e652c..ef1b8ee75c57 100644 --- a/drivers/media/usb/dvb-usb/dib0700_devices.c +++ b/drivers/media/usb/dvb-usb/dib0700_devices.c @@ -508,8 +508,6 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap) #define DEFAULT_RC_INTERVAL 50 -static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; - /* * This function is used only when firmware is < 1.20 version. Newer * firmwares use bulk mode, with functions implemented at dib0700_core, @@ -517,7 +515,6 @@ static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; */ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d) { - u8 key[4]; enum rc_type protocol; u32 scancode; u8 toggle; @@ -532,39 +529,43 @@ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d) return 0; } - i = dib0700_ctrl_rd(d, rc_request, 2, key, 4); + st->buf[0] = REQUEST_POLL_RC; + st->buf[1] = 0; + + i = dib0700_ctrl_rd(d, st->buf, 2, st->buf, 4); if (i <= 0) { err("RC Query Failed"); - return -1; + return -EIO; } /* losing half of KEY_0 events from Philipps rc5 remotes.. */ - if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0) + if (st->buf[0] == 0 && st->buf[1] == 0 + && st->buf[2] == 0 && st->buf[3] == 0) return 0; - /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */ + /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)st->buf[3 - 2],(int)st->buf[3 - 3],(int)st->buf[3 - 1],(int)st->buf[3]); */ dib0700_rc_setup(d, NULL); /* reset ir sensor data to prevent false events */ switch (d->props.rc.core.protocol) { case RC_BIT_NEC: /* NEC protocol sends repeat code as 0 0 0 FF */ - if ((key[3-2] == 0x00) && (key[3-3] == 0x00) && - (key[3] == 0xff)) { + if ((st->buf[3 - 2] == 0x00) && (st->buf[3 - 3] == 0x00) && + (st->buf[3] == 0xff)) { rc_repeat(d->rc_dev); return 0; } protocol = RC_TYPE_NEC; - scancode = RC_SCANCODE_NEC(key[3-2], key[3-3]); + scancode = RC_SCANCODE_NEC(st->buf[3 - 2], st->buf[3 - 3]); toggle = 0; break; default: /* RC-5 protocol changes toggle bit on new keypress */ protocol = RC_TYPE_RC5; - scancode = RC_SCANCODE_RC5(key[3-2], key[3-3]); - toggle = key[3-1]; + scancode = RC_SCANCODE_RC5(st->buf[3 - 2], st->buf[3 - 3]); + toggle = st->buf[3 - 1]; break; } -- cgit From fa1ecd8dc454fe2d3075a964240f45ceb60cb9e0 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 06:53:51 -0300 Subject: [media] dib0700_core: don't use stack on I2C reads Be sure that I2C reads won't use stack by passing a pointer to the state buffer, that we know it was allocated via kmalloc, instead of relying on the buffer allocated by an I2C client. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dib0700_core.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c index 515f89dba199..92d5408684ac 100644 --- a/drivers/media/usb/dvb-usb/dib0700_core.c +++ b/drivers/media/usb/dvb-usb/dib0700_core.c @@ -213,7 +213,7 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg, usb_rcvctrlpipe(d->udev, 0), REQUEST_NEW_I2C_READ, USB_TYPE_VENDOR | USB_DIR_IN, - value, index, msg[i].buf, + value, index, st->buf, msg[i].len, USB_CTRL_GET_TIMEOUT); if (result < 0) { @@ -221,6 +221,14 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg, break; } + if (msg[i].len > sizeof(st->buf)) { + deb_info("buffer too small to fit %d bytes\n", + msg[i].len); + return -EIO; + } + + memcpy(msg[i].buf, st->buf, msg[i].len); + deb_data("<<< "); debug_dump(msg[i].buf, msg[i].len, deb_data); @@ -238,6 +246,13 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg, /* I2C ctrl + FE bus; */ st->buf[3] = ((gen_mode << 6) & 0xC0) | ((bus_mode << 4) & 0x30); + + if (msg[i].len > sizeof(st->buf) - 4) { + deb_info("i2c message to big: %d\n", + msg[i].len); + return -EIO; + } + /* The Actual i2c payload */ memcpy(&st->buf[4], msg[i].buf, msg[i].len); @@ -283,6 +298,11 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap, /* fill in the address */ st->buf[1] = msg[i].addr << 1; /* fill the buffer */ + if (msg[i].len > sizeof(st->buf) - 2) { + deb_info("i2c xfer to big: %d\n", + msg[i].len); + return -EIO; + } memcpy(&st->buf[2], msg[i].buf, msg[i].len); /* write/read request */ @@ -299,6 +319,11 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap, break; } + if (msg[i + 1].len > sizeof(st->buf)) { + deb_info("i2c xfer buffer to small for %d\n", + msg[i].len); + return -EIO; + } memcpy(msg[i + 1].buf, st->buf, msg[i + 1].len); msg[i+1].len = len; -- cgit From 426398b15d9f18ce3e7b5c4e657b4c0103dd8389 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 07:34:36 -0300 Subject: [media] dibusb: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dibusb-common.c | 107 +++++++++++++++++++++++------- drivers/media/usb/dvb-usb/dibusb.h | 3 + 2 files changed, 85 insertions(+), 25 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dibusb-common.c b/drivers/media/usb/dvb-usb/dibusb-common.c index 4b08c2a47ae2..951f3dac9082 100644 --- a/drivers/media/usb/dvb-usb/dibusb-common.c +++ b/drivers/media/usb/dvb-usb/dibusb-common.c @@ -63,72 +63,117 @@ EXPORT_SYMBOL(dibusb_pid_filter_ctrl); int dibusb_power_ctrl(struct dvb_usb_device *d, int onoff) { - u8 b[3]; + u8 *b; int ret; + + b = kmalloc(3, GFP_KERNEL); + if (!b) + return -ENOMEM; + b[0] = DIBUSB_REQ_SET_IOCTL; b[1] = DIBUSB_IOCTL_CMD_POWER_MODE; b[2] = onoff ? DIBUSB_IOCTL_POWER_WAKEUP : DIBUSB_IOCTL_POWER_SLEEP; - ret = dvb_usb_generic_write(d,b,3); + + ret = dvb_usb_generic_write(d, b, 3); + + kfree(b); + msleep(10); + return ret; } EXPORT_SYMBOL(dibusb_power_ctrl); int dibusb2_0_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { - u8 b[3] = { 0 }; int ret; + u8 *b; + + b = kmalloc(3, GFP_KERNEL); + if (!b) + return -ENOMEM; if ((ret = dibusb_streaming_ctrl(adap,onoff)) < 0) - return ret; + goto ret; if (onoff) { b[0] = DIBUSB_REQ_SET_STREAMING_MODE; b[1] = 0x00; - if ((ret = dvb_usb_generic_write(adap->dev,b,2)) < 0) - return ret; + ret = dvb_usb_generic_write(adap->dev, b, 2); + if (ret < 0) + goto ret; } b[0] = DIBUSB_REQ_SET_IOCTL; b[1] = onoff ? DIBUSB_IOCTL_CMD_ENABLE_STREAM : DIBUSB_IOCTL_CMD_DISABLE_STREAM; - return dvb_usb_generic_write(adap->dev,b,3); + ret = dvb_usb_generic_write(adap->dev, b, 3); + +ret: + kfree(b); + return ret; } EXPORT_SYMBOL(dibusb2_0_streaming_ctrl); int dibusb2_0_power_ctrl(struct dvb_usb_device *d, int onoff) { - if (onoff) { - u8 b[3] = { DIBUSB_REQ_SET_IOCTL, DIBUSB_IOCTL_CMD_POWER_MODE, DIBUSB_IOCTL_POWER_WAKEUP }; - return dvb_usb_generic_write(d,b,3); - } else + u8 *b; + int ret; + + if (!onoff) return 0; + + b = kmalloc(3, GFP_KERNEL); + if (!b) + return -ENOMEM; + + b[0] = DIBUSB_REQ_SET_IOCTL; + b[1] = DIBUSB_IOCTL_CMD_POWER_MODE; + b[2] = DIBUSB_IOCTL_POWER_WAKEUP; + + ret = dvb_usb_generic_write(d, b, 3); + + kfree(b); + + return ret; } EXPORT_SYMBOL(dibusb2_0_power_ctrl); static int dibusb_i2c_msg(struct dvb_usb_device *d, u8 addr, u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) { - u8 sndbuf[MAX_XFER_SIZE]; /* lead(1) devaddr,direction(1) addr(2) data(wlen) (len(2) (when reading)) */ + u8 *sndbuf; + int ret, wo, len; + /* write only ? */ - int wo = (rbuf == NULL || rlen == 0), - len = 2 + wlen + (wo ? 0 : 2); + wo = (rbuf == NULL || rlen == 0); + + len = 2 + wlen + (wo ? 0 : 2); - if (4 + wlen > sizeof(sndbuf)) { + sndbuf = kmalloc(MAX_XFER_SIZE, GFP_KERNEL); + if (!sndbuf) + return -ENOMEM; + + if (4 + wlen > MAX_XFER_SIZE) { warn("i2c wr: len=%d is too big!\n", wlen); - return -EOPNOTSUPP; + ret = -EOPNOTSUPP; + goto ret; } sndbuf[0] = wo ? DIBUSB_REQ_I2C_WRITE : DIBUSB_REQ_I2C_READ; sndbuf[1] = (addr << 1) | (wo ? 0 : 1); - memcpy(&sndbuf[2],wbuf,wlen); + memcpy(&sndbuf[2], wbuf, wlen); if (!wo) { - sndbuf[wlen+2] = (rlen >> 8) & 0xff; - sndbuf[wlen+3] = rlen & 0xff; + sndbuf[wlen + 2] = (rlen >> 8) & 0xff; + sndbuf[wlen + 3] = rlen & 0xff; } - return dvb_usb_generic_rw(d,sndbuf,len,rbuf,rlen,0); + ret = dvb_usb_generic_rw(d, sndbuf, len, rbuf, rlen, 0); + +ret: + kfree(sndbuf); + return ret; } /* @@ -320,11 +365,23 @@ EXPORT_SYMBOL(rc_map_dibusb_table); int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { - u8 key[5],cmd = DIBUSB_REQ_POLL_REMOTE; - dvb_usb_generic_rw(d,&cmd,1,key,5,0); - dvb_usb_nec_rc_key_to_event(d,key,event,state); - if (key[0] != 0) - deb_info("key: %*ph\n", 5, key); + u8 *buf; + + buf = kmalloc(5, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = DIBUSB_REQ_POLL_REMOTE; + + dvb_usb_generic_rw(d, buf, 1, buf, 5, 0); + + dvb_usb_nec_rc_key_to_event(d, buf, event, state); + + if (buf[0] != 0) + deb_info("key: %*ph\n", 5, buf); + + kfree(buf); + return 0; } EXPORT_SYMBOL(dibusb_rc_query); diff --git a/drivers/media/usb/dvb-usb/dibusb.h b/drivers/media/usb/dvb-usb/dibusb.h index 3f82163d8ab8..697be2a17ade 100644 --- a/drivers/media/usb/dvb-usb/dibusb.h +++ b/drivers/media/usb/dvb-usb/dibusb.h @@ -96,6 +96,9 @@ #define DIBUSB_IOCTL_CMD_ENABLE_STREAM 0x01 #define DIBUSB_IOCTL_CMD_DISABLE_STREAM 0x02 +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + struct dibusb_state { struct dib_fe_xfer_ops ops; int mt2060_present; -- cgit From ff1c123545d706c6e414132c9fc93e345f5141da Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 13:40:48 -0300 Subject: [media] dibusb: handle error code on RC query There's no sense on decoding and generating a RC key code if there was an error on the URB control message. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dibusb-common.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dibusb-common.c b/drivers/media/usb/dvb-usb/dibusb-common.c index 951f3dac9082..b0fd9a609352 100644 --- a/drivers/media/usb/dvb-usb/dibusb-common.c +++ b/drivers/media/usb/dvb-usb/dibusb-common.c @@ -366,6 +366,7 @@ EXPORT_SYMBOL(rc_map_dibusb_table); int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { u8 *buf; + int ret; buf = kmalloc(5, GFP_KERNEL); if (!buf) @@ -373,7 +374,9 @@ int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) buf[0] = DIBUSB_REQ_POLL_REMOTE; - dvb_usb_generic_rw(d, buf, 1, buf, 5, 0); + ret = dvb_usb_generic_rw(d, buf, 1, buf, 5, 0); + if (ret < 0) + goto ret; dvb_usb_nec_rc_key_to_event(d, buf, event, state); @@ -382,6 +385,7 @@ int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) kfree(buf); - return 0; +ret: + return ret; } EXPORT_SYMBOL(dibusb_rc_query); -- cgit From f0b0ada7184cca44bb5ae96903eca304cc20eec5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 07:55:38 -0300 Subject: [media] digitv: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/digitv.c | 20 +++++++++++--------- drivers/media/usb/dvb-usb/digitv.h | 5 ++++- 2 files changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c index 63134335c994..09f8c28bd4db 100644 --- a/drivers/media/usb/dvb-usb/digitv.c +++ b/drivers/media/usb/dvb-usb/digitv.c @@ -28,20 +28,22 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int digitv_ctrl_msg(struct dvb_usb_device *d, u8 cmd, u8 vv, u8 *wbuf, int wlen, u8 *rbuf, int rlen) { + struct digitv_state *st = d->priv; int wo = (rbuf == NULL || rlen == 0); /* write-only */ - u8 sndbuf[7],rcvbuf[7]; - memset(sndbuf,0,7); memset(rcvbuf,0,7); - sndbuf[0] = cmd; - sndbuf[1] = vv; - sndbuf[2] = wo ? wlen : rlen; + memset(st->sndbuf, 0, 7); + memset(st->rcvbuf, 0, 7); + + st->sndbuf[0] = cmd; + st->sndbuf[1] = vv; + st->sndbuf[2] = wo ? wlen : rlen; if (wo) { - memcpy(&sndbuf[3],wbuf,wlen); - dvb_usb_generic_write(d,sndbuf,7); + memcpy(&st->sndbuf[3], wbuf, wlen); + dvb_usb_generic_write(d, st->sndbuf, 7); } else { - dvb_usb_generic_rw(d,sndbuf,7,rcvbuf,7,10); - memcpy(rbuf,&rcvbuf[3],rlen); + dvb_usb_generic_rw(d, st->sndbuf, 7, st->rcvbuf, 7, 10); + memcpy(rbuf, &st->rcvbuf[3], rlen); } return 0; } diff --git a/drivers/media/usb/dvb-usb/digitv.h b/drivers/media/usb/dvb-usb/digitv.h index 908c09f4966b..581e09c25491 100644 --- a/drivers/media/usb/dvb-usb/digitv.h +++ b/drivers/media/usb/dvb-usb/digitv.h @@ -5,7 +5,10 @@ #include "dvb-usb.h" struct digitv_state { - int is_nxt6000; + int is_nxt6000; + + unsigned char sndbuf[7]; + unsigned char rcvbuf[7]; }; /* protocol (from usblogging and the SDK: -- cgit From 208d8af509455ebf25f25f974c9907c0eb1a2b0a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Oct 2016 15:34:13 -0300 Subject: [media] dtt200u-fe: don't keep waiting for lock at set_frontend() It is up to the frontend kthread to wait for lock. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dtt200u-fe.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c index c09332bd99cb..9bb15f7b48db 100644 --- a/drivers/media/usb/dvb-usb/dtt200u-fe.c +++ b/drivers/media/usb/dvb-usb/dtt200u-fe.c @@ -105,8 +105,6 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend *fe) { struct dtv_frontend_properties *fep = &fe->dtv_property_cache; struct dtt200u_fe_state *state = fe->demodulator_priv; - int i; - enum fe_status st; u16 freq = fep->frequency / 250000; u8 bwbuf[2] = { SET_BANDWIDTH, 0 },freqbuf[3] = { SET_RF_FREQ, 0, 0 }; @@ -130,13 +128,6 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend *fe) freqbuf[2] = (freq >> 8) & 0xff; dvb_usb_generic_write(state->d,freqbuf,3); - for (i = 0; i < 30; i++) { - msleep(20); - dtt200u_fe_read_status(fe, &st); - if (st & FE_TIMEDOUT) - continue; - } - return 0; } -- cgit From 89919b518863e7dac98d4d6d4b08ed2113d91d27 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 08:06:57 -0300 Subject: [media] dtt200u-fe: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dtt200u-fe.c | 95 +++++++++++++++++++++++----------- 1 file changed, 65 insertions(+), 30 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c index 9bb15f7b48db..7f7f64be6353 100644 --- a/drivers/media/usb/dvb-usb/dtt200u-fe.c +++ b/drivers/media/usb/dvb-usb/dtt200u-fe.c @@ -18,17 +18,22 @@ struct dtt200u_fe_state { struct dtv_frontend_properties fep; struct dvb_frontend frontend; + + unsigned char data[80]; + struct mutex data_mutex; }; static int dtt200u_fe_read_status(struct dvb_frontend *fe, enum fe_status *stat) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 st = GET_TUNE_STATUS, b[3]; - dvb_usb_generic_rw(state->d,&st,1,b,3,0); + mutex_lock(&state->data_mutex); + state->data[0] = GET_TUNE_STATUS; + + dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0); - switch (b[0]) { + switch (state->data[0]) { case 0x01: *stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; @@ -41,51 +46,75 @@ static int dtt200u_fe_read_status(struct dvb_frontend *fe, *stat = 0; break; } + mutex_unlock(&state->data_mutex); return 0; } static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_VIT_ERR_CNT,b[3]; - dvb_usb_generic_rw(state->d,&bw,1,b,3,0); - *ber = (b[0] << 16) | (b[1] << 8) | b[2]; + + mutex_lock(&state->data_mutex); + state->data[0] = GET_VIT_ERR_CNT; + + dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0); + *ber = (state->data[0] << 16) | (state->data[1] << 8) | state->data[2]; + + mutex_unlock(&state->data_mutex); return 0; } static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_RS_UNCOR_BLK_CNT,b[2]; - dvb_usb_generic_rw(state->d,&bw,1,b,2,0); - *unc = (b[0] << 8) | b[1]; - return 0; + mutex_lock(&state->data_mutex); + state->data[0] = GET_RS_UNCOR_BLK_CNT; + + dvb_usb_generic_rw(state->d, state->data, 1, state->data, 2, 0); + + mutex_unlock(&state->data_mutex); + return ret; } static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_AGC, b; - dvb_usb_generic_rw(state->d,&bw,1,&b,1,0); - *strength = (b << 8) | b; - return 0; + + mutex_lock(&state->data_mutex); + state->data[0] = GET_AGC; + + dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0); + + mutex_unlock(&state->data_mutex); + return ret; } static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_SNR,br; - dvb_usb_generic_rw(state->d,&bw,1,&br,1,0); - *snr = ~((br << 8) | br); - return 0; + + mutex_lock(&state->data_mutex); + state->data[0] = GET_SNR; + + dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0); + + mutex_unlock(&state->data_mutex); + return ret; } static int dtt200u_fe_init(struct dvb_frontend* fe) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 b = SET_INIT; - return dvb_usb_generic_write(state->d,&b,1); + int ret; + + mutex_lock(&state->data_mutex); + state->data[0] = SET_INIT; + + ret = dvb_usb_generic_write(state->d, state->data, 1); + mutex_unlock(&state->data_mutex); + + return ret; } static int dtt200u_fe_sleep(struct dvb_frontend* fe) @@ -106,29 +135,34 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend *fe) struct dtv_frontend_properties *fep = &fe->dtv_property_cache; struct dtt200u_fe_state *state = fe->demodulator_priv; u16 freq = fep->frequency / 250000; - u8 bwbuf[2] = { SET_BANDWIDTH, 0 },freqbuf[3] = { SET_RF_FREQ, 0, 0 }; + mutex_lock(&state->data_mutex); + state->data[0] = SET_BANDWIDTH; switch (fep->bandwidth_hz) { case 8000000: - bwbuf[1] = 8; + state->data[1] = 8; break; case 7000000: - bwbuf[1] = 7; + state->data[1] = 7; break; case 6000000: - bwbuf[1] = 6; + state->data[1] = 6; break; default: - return -EINVAL; + ret = -EINVAL; + goto ret; } - dvb_usb_generic_write(state->d,bwbuf,2); + dvb_usb_generic_write(state->d, state->data, 2); - freqbuf[1] = freq & 0xff; - freqbuf[2] = (freq >> 8) & 0xff; - dvb_usb_generic_write(state->d,freqbuf,3); + state->data[0] = SET_RF_FREQ; + state->data[1] = freq & 0xff; + state->data[2] = (freq >> 8) & 0xff; + dvb_usb_generic_write(state->d, state->data, 3); - return 0; +ret: + mutex_unlock(&state->data_mutex); + return ret; } static int dtt200u_fe_get_frontend(struct dvb_frontend* fe, @@ -160,6 +194,7 @@ struct dvb_frontend* dtt200u_fe_attach(struct dvb_usb_device *d) deb_info("attaching frontend dtt200u\n"); state->d = d; + mutex_init(&state->data_mutex); memcpy(&state->frontend.ops,&dtt200u_fe_ops,sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; -- cgit From ba705a629ceee28f7ee4a5f977da52278b683eb0 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 13:44:09 -0300 Subject: [media] dtt200u-fe: handle errors on USB control messages If something goes wrong, return an error code, instead of assuming that everything went fine. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dtt200u-fe.c | 40 ++++++++++++++++++++++++++-------- 1 file changed, 31 insertions(+), 9 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c index 7f7f64be6353..f5c042baa254 100644 --- a/drivers/media/usb/dvb-usb/dtt200u-fe.c +++ b/drivers/media/usb/dvb-usb/dtt200u-fe.c @@ -27,11 +27,17 @@ static int dtt200u_fe_read_status(struct dvb_frontend *fe, enum fe_status *stat) { struct dtt200u_fe_state *state = fe->demodulator_priv; + int ret; mutex_lock(&state->data_mutex); state->data[0] = GET_TUNE_STATUS; - dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0); + ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0); + if (ret < 0) { + *stat = 0; + mutex_unlock(&state->data_mutex); + return ret; + } switch (state->data[0]) { case 0x01: @@ -53,25 +59,30 @@ static int dtt200u_fe_read_status(struct dvb_frontend *fe, static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber) { struct dtt200u_fe_state *state = fe->demodulator_priv; + int ret; mutex_lock(&state->data_mutex); state->data[0] = GET_VIT_ERR_CNT; - dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0); - *ber = (state->data[0] << 16) | (state->data[1] << 8) | state->data[2]; + ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0); + if (ret >= 0) + *ber = (state->data[0] << 16) | (state->data[1] << 8) | state->data[2]; mutex_unlock(&state->data_mutex); - return 0; + return ret; } static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) { struct dtt200u_fe_state *state = fe->demodulator_priv; + int ret; mutex_lock(&state->data_mutex); state->data[0] = GET_RS_UNCOR_BLK_CNT; - dvb_usb_generic_rw(state->d, state->data, 1, state->data, 2, 0); + ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 2, 0); + if (ret >= 0) + *unc = (state->data[0] << 8) | state->data[1]; mutex_unlock(&state->data_mutex); return ret; @@ -80,11 +91,14 @@ static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) { struct dtt200u_fe_state *state = fe->demodulator_priv; + int ret; mutex_lock(&state->data_mutex); state->data[0] = GET_AGC; - dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0); + ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0); + if (ret >= 0) + *strength = (state->data[0] << 8) | state->data[0]; mutex_unlock(&state->data_mutex); return ret; @@ -93,11 +107,14 @@ static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strengt static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr) { struct dtt200u_fe_state *state = fe->demodulator_priv; + int ret; mutex_lock(&state->data_mutex); state->data[0] = GET_SNR; - dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0); + ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0); + if (ret >= 0) + *snr = ~((state->data[0] << 8) | state->data[0]); mutex_unlock(&state->data_mutex); return ret; @@ -134,6 +151,7 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend *fe) { struct dtv_frontend_properties *fep = &fe->dtv_property_cache; struct dtt200u_fe_state *state = fe->demodulator_priv; + int ret; u16 freq = fep->frequency / 250000; mutex_lock(&state->data_mutex); @@ -153,12 +171,16 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend *fe) goto ret; } - dvb_usb_generic_write(state->d, state->data, 2); + ret = dvb_usb_generic_write(state->d, state->data, 2); + if (ret < 0) + goto ret; state->data[0] = SET_RF_FREQ; state->data[1] = freq & 0xff; state->data[2] = (freq >> 8) & 0xff; - dvb_usb_generic_write(state->d, state->data, 3); + ret = dvb_usb_generic_write(state->d, state->data, 3); + if (ret < 0) + goto ret; ret: mutex_unlock(&state->data_mutex); -- cgit From ab883e2de3fc58c0af6070ea067a607a6310772b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 08:40:43 -0300 Subject: [media] dtt200u: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dtt200u.c | 104 ++++++++++++++++++++++++++---------- 1 file changed, 75 insertions(+), 29 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c index d2a01b50af0d..7706938b5167 100644 --- a/drivers/media/usb/dvb-usb/dtt200u.c +++ b/drivers/media/usb/dvb-usb/dtt200u.c @@ -20,74 +20,103 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); +struct dtt200u_state { + unsigned char data[80]; + struct mutex data_mutex; +}; + static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) { - u8 b = SET_INIT; + struct dtt200u_state *st = d->priv; + + mutex_lock(&st->data_mutex); + + st->data[0] = SET_INIT; if (onoff) - dvb_usb_generic_write(d,&b,2); + dvb_usb_generic_write(d, st->data, 2); + mutex_unlock(&st->data_mutex); return 0; } static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { - u8 b_streaming[2] = { SET_STREAMING, onoff }; - u8 b_rst_pid = RESET_PID_FILTER; + struct dtt200u_state *st = adap->dev->priv; + + mutex_lock(&st->data_mutex); + st->data[0] = SET_STREAMING; + st->data[1] = onoff; - dvb_usb_generic_write(adap->dev, b_streaming, 2); + dvb_usb_generic_write(adap->dev, st->data, 2); + + if (onoff) + return 0; + + st->data[0] = RESET_PID_FILTER; + dvb_usb_generic_write(adap->dev, st->data, 1); + + mutex_unlock(&st->data_mutex); - if (onoff == 0) - dvb_usb_generic_write(adap->dev, &b_rst_pid, 1); return 0; } static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) { - u8 b_pid[4]; + struct dtt200u_state *st = adap->dev->priv; + int ret; + pid = onoff ? pid : 0; - b_pid[0] = SET_PID_FILTER; - b_pid[1] = index; - b_pid[2] = pid & 0xff; - b_pid[3] = (pid >> 8) & 0x1f; + mutex_lock(&st->data_mutex); + st->data[0] = SET_PID_FILTER; + st->data[1] = index; + st->data[2] = pid & 0xff; + st->data[3] = (pid >> 8) & 0x1f; - return dvb_usb_generic_write(adap->dev, b_pid, 4); + ret = dvb_usb_generic_write(adap->dev, st->data, 4); + mutex_unlock(&st->data_mutex); + + return ret; } static int dtt200u_rc_query(struct dvb_usb_device *d) { - u8 key[5],cmd = GET_RC_CODE; + struct dtt200u_state *st = d->priv; u32 scancode; - dvb_usb_generic_rw(d,&cmd,1,key,5,0); - if (key[0] == 1) { + mutex_lock(&st->data_mutex); + st->data[0] = GET_RC_CODE; + + dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); + if (st->data[0] == 1) { enum rc_type proto = RC_TYPE_NEC; - scancode = key[1]; - if ((u8) ~key[1] != key[2]) { + scancode = st->data[1]; + if ((u8) ~st->data[1] != st->data[2]) { /* Extended NEC */ scancode = scancode << 8; - scancode |= key[2]; + scancode |= st->data[2]; proto = RC_TYPE_NECX; } scancode = scancode << 8; - scancode |= key[3]; + scancode |= st->data[3]; /* Check command checksum is ok */ - if ((u8) ~key[3] == key[4]) + if ((u8) ~st->data[3] == st->data[4]) rc_keydown(d->rc_dev, proto, scancode, 0); else rc_keyup(d->rc_dev); - } else if (key[0] == 2) { + } else if (st->data[0] == 2) { rc_repeat(d->rc_dev); } else { rc_keyup(d->rc_dev); } - if (key[0] != 0) - deb_info("key: %*ph\n", 5, key); + if (st->data[0] != 0) + deb_info("st->data: %*ph\n", 5, st->data); + mutex_unlock(&st->data_mutex); return 0; } @@ -106,17 +135,24 @@ static struct dvb_usb_device_properties wt220u_miglia_properties; static int dtt200u_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { + struct dvb_usb_device *d; + struct dtt200u_state *st; + if (0 == dvb_usb_device_init(intf, &dtt200u_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_fc_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_zl0353_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_miglia_properties, - THIS_MODULE, NULL, adapter_nr)) + THIS_MODULE, &d, adapter_nr)) { + st = d->priv; + mutex_init(&st->data_mutex); + return 0; + } return -ENODEV; } @@ -140,6 +176,8 @@ static struct dvb_usb_device_properties dtt200u_properties = { .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-dtt200u-01.fw", + .size_of_priv = sizeof(struct dtt200u_state), + .num_adapters = 1, .adapter = { { @@ -190,6 +228,8 @@ static struct dvb_usb_device_properties wt220u_properties = { .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-wt220u-02.fw", + .size_of_priv = sizeof(struct dtt200u_state), + .num_adapters = 1, .adapter = { { @@ -240,6 +280,8 @@ static struct dvb_usb_device_properties wt220u_fc_properties = { .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-wt220u-fc03.fw", + .size_of_priv = sizeof(struct dtt200u_state), + .num_adapters = 1, .adapter = { { @@ -290,6 +332,8 @@ static struct dvb_usb_device_properties wt220u_zl0353_properties = { .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-wt220u-zl0353-01.fw", + .size_of_priv = sizeof(struct dtt200u_state), + .num_adapters = 1, .adapter = { { @@ -340,6 +384,8 @@ static struct dvb_usb_device_properties wt220u_miglia_properties = { .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-wt220u-miglia-01.fw", + .size_of_priv = sizeof(struct dtt200u_state), + .num_adapters = 1, .generic_bulk_ctrl_endpoint = 0x01, -- cgit From a3f9f07e06ebf37261171e167e2110b758c2a147 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 13:37:50 -0300 Subject: [media] dtt200u: handle USB control message errors If something bad happens while an USB control message is transfered, return an error code. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dtt200u.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c index 7706938b5167..f88572c7ae7c 100644 --- a/drivers/media/usb/dvb-usb/dtt200u.c +++ b/drivers/media/usb/dvb-usb/dtt200u.c @@ -28,37 +28,42 @@ struct dtt200u_state { static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) { struct dtt200u_state *st = d->priv; + int ret = 0; mutex_lock(&st->data_mutex); st->data[0] = SET_INIT; if (onoff) - dvb_usb_generic_write(d, st->data, 2); + ret = dvb_usb_generic_write(d, st->data, 2); mutex_unlock(&st->data_mutex); - return 0; + return ret; } static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { struct dtt200u_state *st = adap->dev->priv; + int ret; mutex_lock(&st->data_mutex); st->data[0] = SET_STREAMING; st->data[1] = onoff; - dvb_usb_generic_write(adap->dev, st->data, 2); + ret = dvb_usb_generic_write(adap->dev, st->data, 2); + if (ret < 0) + goto ret; if (onoff) - return 0; + goto ret; st->data[0] = RESET_PID_FILTER; - dvb_usb_generic_write(adap->dev, st->data, 1); + ret = dvb_usb_generic_write(adap->dev, st->data, 1); +ret: mutex_unlock(&st->data_mutex); - return 0; + return ret; } static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) @@ -84,11 +89,15 @@ static int dtt200u_rc_query(struct dvb_usb_device *d) { struct dtt200u_state *st = d->priv; u32 scancode; + int ret; mutex_lock(&st->data_mutex); st->data[0] = GET_RC_CODE; - dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); + ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); + if (ret < 0) + goto ret; + if (st->data[0] == 1) { enum rc_type proto = RC_TYPE_NEC; @@ -116,8 +125,9 @@ static int dtt200u_rc_query(struct dvb_usb_device *d) if (st->data[0] != 0) deb_info("st->data: %*ph\n", 5, st->data); +ret: mutex_unlock(&st->data_mutex); - return 0; + return ret; } static int dtt200u_frontend_attach(struct dvb_usb_adapter *adap) -- cgit From 8f306145df334e2797ef5aa63225cd5178e569c1 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 08:51:23 -0300 Subject: [media] dtv5100: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dtv5100.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dtv5100.c b/drivers/media/usb/dvb-usb/dtv5100.c index 3d11df41cac0..c60fb54f445f 100644 --- a/drivers/media/usb/dvb-usb/dtv5100.c +++ b/drivers/media/usb/dvb-usb/dtv5100.c @@ -31,9 +31,14 @@ module_param_named(debug, dvb_usb_dtv5100_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); +struct dtv5100_state { + unsigned char data[80]; +}; + static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr, u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) { + struct dtv5100_state *st = d->priv; u8 request; u8 type; u16 value; @@ -60,9 +65,10 @@ static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr, } index = (addr << 8) + wbuf[0]; + memcpy(st->data, rbuf, rlen); msleep(1); /* avoid I2C errors */ return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), request, - type, value, index, rbuf, rlen, + type, value, index, st->data, rlen, DTV5100_USB_TIMEOUT); } @@ -176,7 +182,7 @@ static struct dvb_usb_device_properties dtv5100_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, .usb_ctrl = DEVICE_SPECIFIC, - .size_of_priv = 0, + .size_of_priv = sizeof(struct dtv5100_state), .num_adapters = 1, .adapter = {{ -- cgit From fa86c9a1fca5a50563cc63e97aa130a3c54f1d4c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 11:24:21 -0300 Subject: [media] gp8psk: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/gp8psk.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c index 5d0384dd45b5..807f5628a3bb 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.c +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -24,6 +24,10 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DV DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); +struct gp8psk_state { + unsigned char data[80]; +}; + static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers) { return (gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6)); @@ -53,17 +57,19 @@ static void gp8psk_info(struct dvb_usb_device *d) int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) { + struct gp8psk_state *st = d->priv; int ret = 0,try = 0; if ((ret = mutex_lock_interruptible(&d->usb_mutex))) return ret; while (ret >= 0 && ret != blen && try < 3) { + memcpy(st->data, b, blen); ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev,0), req, USB_TYPE_VENDOR | USB_DIR_IN, - value,index,b,blen, + value, index, st->data, blen, 2000); deb_info("reading number %d (ret: %d)\n",try,ret); try++; @@ -86,6 +92,7 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) { + struct gp8psk_state *st = d->priv; int ret; deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index); @@ -94,11 +101,12 @@ int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, if ((ret = mutex_lock_interruptible(&d->usb_mutex))) return ret; + memcpy(st->data, b, blen); if (usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0), req, USB_TYPE_VENDOR | USB_DIR_OUT, - value,index,b,blen, + value, index, st->data, blen, 2000) != blen) { warn("usb out operation failed."); ret = -EIO; @@ -265,6 +273,8 @@ static struct dvb_usb_device_properties gp8psk_properties = { .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-gp8psk-01.fw", + .size_of_priv = sizeof(struct gp8psk_state), + .num_adapters = 1, .adapter = { { -- cgit From f1a503dddf4d4da2b7bbf6ae4e92527bdc265bb9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 14:12:48 -0300 Subject: [media] gp8psk: don't go past the buffer size Add checks to avoid going out of the buffer. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/gp8psk.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c index 807f5628a3bb..adfd76491451 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.c +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -60,6 +60,9 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 struct gp8psk_state *st = d->priv; int ret = 0,try = 0; + if (blen > sizeof(st->data)) + return -EIO; + if ((ret = mutex_lock_interruptible(&d->usb_mutex))) return ret; @@ -98,6 +101,9 @@ int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index); debug_dump(b,blen,deb_xfer); + if (blen > sizeof(st->data)) + return -EIO; + if ((ret = mutex_lock_interruptible(&d->usb_mutex))) return ret; @@ -151,6 +157,11 @@ static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d) err("failed to load bcm4500 firmware."); goto out_free; } + if (buflen > 64) { + err("firmare chunk size bigger than 64 bytes."); + goto out_free; + } + memcpy(buf, ptr, buflen); if (dvb_usb_generic_write(d, buf, buflen)) { err("failed to load bcm4500 firmware."); -- cgit From c3a66e9f465e7e792dff6ccd571bc657e6504c7b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 11:38:46 -0300 Subject: [media] nova-t-usb2: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/nova-t-usb2.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/media/usb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c index fc7569e2728d..26d7188a1163 100644 --- a/drivers/media/usb/dvb-usb/nova-t-usb2.c +++ b/drivers/media/usb/dvb-usb/nova-t-usb2.c @@ -74,22 +74,29 @@ static struct rc_map_table rc_map_haupp_table[] = { */ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { - u8 key[5],cmd[2] = { DIBUSB_REQ_POLL_REMOTE, 0x35 }, data,toggle,custom; + u8 *buf, data, toggle, custom; u16 raw; int i; struct dibusb_device_state *st = d->priv; - dvb_usb_generic_rw(d,cmd,2,key,5,0); + buf = kmalloc(5, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = DIBUSB_REQ_POLL_REMOTE; + buf[1] = 0x35; + dvb_usb_generic_rw(d, buf, 2, buf, 5, 0); *state = REMOTE_NO_KEY_PRESSED; - switch (key[0]) { + switch (buf[0]) { case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED: - raw = ((key[1] << 8) | key[2]) >> 3; + raw = ((buf[1] << 8) | buf[2]) >> 3; toggle = !!(raw & 0x800); data = raw & 0x3f; custom = (raw >> 6) & 0x1f; - deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",key[1],key[2],key[3],custom,data,toggle); + deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n", + buf[1], buf[2], buf[3], custom, data, toggle); for (i = 0; i < ARRAY_SIZE(rc_map_haupp_table); i++) { if (rc5_data(&rc_map_haupp_table[i]) == data && @@ -117,6 +124,7 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) break; } + kfree(buf); return 0; } -- cgit From 73d5c5c864f4094e86708760fd4612fbf1e6e76c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 11:59:44 -0300 Subject: [media] pctv452e: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/pctv452e.c | 129 ++++++++++++++++++++--------------- 1 file changed, 74 insertions(+), 55 deletions(-) diff --git a/drivers/media/usb/dvb-usb/pctv452e.c b/drivers/media/usb/dvb-usb/pctv452e.c index c05de1b088a4..58b685094904 100644 --- a/drivers/media/usb/dvb-usb/pctv452e.c +++ b/drivers/media/usb/dvb-usb/pctv452e.c @@ -97,13 +97,14 @@ struct pctv452e_state { u8 c; /* transaction counter, wraps around... */ u8 initialized; /* set to 1 if 0x15 has been sent */ u16 last_rc_key; + + unsigned char data[80]; }; static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, unsigned int write_len, unsigned int read_len) { struct pctv452e_state *state = (struct pctv452e_state *)d->priv; - u8 buf[64]; u8 id; unsigned int rlen; int ret; @@ -112,33 +113,36 @@ static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, BUG_ON(write_len > 64 - 4); BUG_ON(read_len > 64 - 4); + mutex_lock(&state->ca_mutex); id = state->c++; - buf[0] = SYNC_BYTE_OUT; - buf[1] = id; - buf[2] = cmd; - buf[3] = write_len; + state->data[0] = SYNC_BYTE_OUT; + state->data[1] = id; + state->data[2] = cmd; + state->data[3] = write_len; - memcpy(buf + 4, data, write_len); + memcpy(state->data + 4, data, write_len); rlen = (read_len > 0) ? 64 : 0; - ret = dvb_usb_generic_rw(d, buf, 4 + write_len, - buf, rlen, /* delay_ms */ 0); + ret = dvb_usb_generic_rw(d, state->data, 4 + write_len, + state->data, rlen, /* delay_ms */ 0); if (0 != ret) goto failed; ret = -EIO; - if (SYNC_BYTE_IN != buf[0] || id != buf[1]) + if (SYNC_BYTE_IN != state->data[0] || id != state->data[1]) goto failed; - memcpy(data, buf + 4, read_len); + memcpy(data, state->data + 4, read_len); + mutex_unlock(&state->ca_mutex); return 0; failed: err("CI error %d; %02X %02X %02X -> %*ph.", - ret, SYNC_BYTE_OUT, id, cmd, 3, buf); + ret, SYNC_BYTE_OUT, id, cmd, 3, state->data); + mutex_unlock(&state->ca_mutex); return ret; } @@ -405,52 +409,53 @@ static int pctv452e_i2c_msg(struct dvb_usb_device *d, u8 addr, u8 *rcv_buf, u8 rcv_len) { struct pctv452e_state *state = (struct pctv452e_state *)d->priv; - u8 buf[64]; u8 id; int ret; + mutex_lock(&state->ca_mutex); id = state->c++; ret = -EINVAL; if (snd_len > 64 - 7 || rcv_len > 64 - 7) goto failed; - buf[0] = SYNC_BYTE_OUT; - buf[1] = id; - buf[2] = PCTV_CMD_I2C; - buf[3] = snd_len + 3; - buf[4] = addr << 1; - buf[5] = snd_len; - buf[6] = rcv_len; + state->data[0] = SYNC_BYTE_OUT; + state->data[1] = id; + state->data[2] = PCTV_CMD_I2C; + state->data[3] = snd_len + 3; + state->data[4] = addr << 1; + state->data[5] = snd_len; + state->data[6] = rcv_len; - memcpy(buf + 7, snd_buf, snd_len); + memcpy(state->data + 7, snd_buf, snd_len); - ret = dvb_usb_generic_rw(d, buf, 7 + snd_len, - buf, /* rcv_len */ 64, + ret = dvb_usb_generic_rw(d, state->data, 7 + snd_len, + state->data, /* rcv_len */ 64, /* delay_ms */ 0); if (ret < 0) goto failed; /* TT USB protocol error. */ ret = -EIO; - if (SYNC_BYTE_IN != buf[0] || id != buf[1]) + if (SYNC_BYTE_IN != state->data[0] || id != state->data[1]) goto failed; /* I2C device didn't respond as expected. */ ret = -EREMOTEIO; - if (buf[5] < snd_len || buf[6] < rcv_len) + if (state->data[5] < snd_len || state->data[6] < rcv_len) goto failed; - memcpy(rcv_buf, buf + 7, rcv_len); + memcpy(rcv_buf, state->data + 7, rcv_len); + mutex_unlock(&state->ca_mutex); return rcv_len; failed: - err("I2C error %d; %02X %02X %02X %02X %02X -> " - "%02X %02X %02X %02X %02X.", + err("I2C error %d; %02X %02X %02X %02X %02X -> %*ph", ret, SYNC_BYTE_OUT, id, addr << 1, snd_len, rcv_len, - buf[0], buf[1], buf[4], buf[5], buf[6]); + 7, state->data); + mutex_unlock(&state->ca_mutex); return ret; } @@ -499,8 +504,7 @@ static u32 pctv452e_i2c_func(struct i2c_adapter *adapter) static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i) { struct pctv452e_state *state = (struct pctv452e_state *)d->priv; - u8 b0[] = { 0xaa, 0, PCTV_CMD_RESET, 1, 0 }; - u8 rx[PCTV_ANSWER_LEN]; + u8 *rx; int ret; info("%s: %d\n", __func__, i); @@ -511,6 +515,11 @@ static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i) if (state->initialized) return 0; + rx = kmalloc(PCTV_ANSWER_LEN, GFP_KERNEL); + if (!rx) + return -ENOMEM; + + mutex_lock(&state->ca_mutex); /* hmm where shoud this should go? */ ret = usb_set_interface(d->udev, 0, ISOC_INTERFACE_ALTERNATIVE); if (ret != 0) @@ -518,65 +527,75 @@ static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i) __func__, ret); /* this is a one-time initialization, dont know where to put */ - b0[1] = state->c++; + state->data[0] = 0xaa; + state->data[1] = state->c++; + state->data[2] = PCTV_CMD_RESET; + state->data[3] = 1; + state->data[4] = 0; /* reset board */ - ret = dvb_usb_generic_rw(d, b0, sizeof(b0), rx, PCTV_ANSWER_LEN, 0); + ret = dvb_usb_generic_rw(d, state->data, 5, rx, PCTV_ANSWER_LEN, 0); if (ret) - return ret; + goto ret; - b0[1] = state->c++; - b0[4] = 1; + state->data[1] = state->c++; + state->data[4] = 1; /* reset board (again?) */ - ret = dvb_usb_generic_rw(d, b0, sizeof(b0), rx, PCTV_ANSWER_LEN, 0); + ret = dvb_usb_generic_rw(d, state->data, 5, rx, PCTV_ANSWER_LEN, 0); if (ret) - return ret; + goto ret; state->initialized = 1; - return 0; +ret: + mutex_unlock(&state->ca_mutex); + kfree(rx); + return ret; } static int pctv452e_rc_query(struct dvb_usb_device *d) { struct pctv452e_state *state = (struct pctv452e_state *)d->priv; - u8 b[CMD_BUFFER_SIZE]; - u8 rx[PCTV_ANSWER_LEN]; int ret, i; - u8 id = state->c++; + u8 id; + + mutex_lock(&state->ca_mutex); + id = state->c++; /* prepare command header */ - b[0] = SYNC_BYTE_OUT; - b[1] = id; - b[2] = PCTV_CMD_IR; - b[3] = 0; + state->data[0] = SYNC_BYTE_OUT; + state->data[1] = id; + state->data[2] = PCTV_CMD_IR; + state->data[3] = 0; /* send ir request */ - ret = dvb_usb_generic_rw(d, b, 4, rx, PCTV_ANSWER_LEN, 0); + ret = dvb_usb_generic_rw(d, state->data, 4, + state->data, PCTV_ANSWER_LEN, 0); if (ret != 0) - return ret; + goto ret; if (debug > 3) { - info("%s: read: %2d: %*ph: ", __func__, ret, 3, rx); - for (i = 0; (i < rx[3]) && ((i+3) < PCTV_ANSWER_LEN); i++) - info(" %02x", rx[i+3]); + info("%s: read: %2d: %*ph: ", __func__, ret, 3, state->data); + for (i = 0; (i < state->data[3]) && ((i + 3) < PCTV_ANSWER_LEN); i++) + info(" %02x", state->data[i + 3]); info("\n"); } - if ((rx[3] == 9) && (rx[12] & 0x01)) { + if ((state->data[3] == 9) && (state->data[12] & 0x01)) { /* got a "press" event */ - state->last_rc_key = RC_SCANCODE_RC5(rx[7], rx[6]); + state->last_rc_key = RC_SCANCODE_RC5(state->data[7], state->data[6]); if (debug > 2) info("%s: cmd=0x%02x sys=0x%02x\n", - __func__, rx[6], rx[7]); + __func__, state->data[6], state->data[7]); rc_keydown(d->rc_dev, RC_TYPE_RC5, state->last_rc_key, 0); } else if (state->last_rc_key) { rc_keyup(d->rc_dev); state->last_rc_key = 0; } - - return 0; +ret: + mutex_unlock(&state->ca_mutex); + return ret; } static int pctv452e_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) -- cgit From 5dfd2c8f263dfcaf614d24734f0af8c1c18a9ca8 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 14:15:53 -0300 Subject: [media] pctv452e: don't call BUG_ON() on non-fatal error There are some conditions on this driver that are tested with BUG_ON() with are not serious enough to hang a machine. So, just return an error if this happens. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/pctv452e.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/media/usb/dvb-usb/pctv452e.c b/drivers/media/usb/dvb-usb/pctv452e.c index 58b685094904..7ad0006c5ae0 100644 --- a/drivers/media/usb/dvb-usb/pctv452e.c +++ b/drivers/media/usb/dvb-usb/pctv452e.c @@ -109,9 +109,10 @@ static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, unsigned int rlen; int ret; - BUG_ON(NULL == data && 0 != (write_len | read_len)); - BUG_ON(write_len > 64 - 4); - BUG_ON(read_len > 64 - 4); + if (!data || (write_len > 64 - 4) || (read_len > 64 - 4)) { + err("%s: transfer data invalid", __func__); + return -EIO; + }; mutex_lock(&state->ca_mutex); id = state->c++; -- cgit From 88ca3619001380a3147246a22cb356f6065ad713 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 12:04:38 -0300 Subject: [media] technisat-usb2: use DMA buffers for I2C transfers The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. On this driver, most of the transfers are OK, but the I2C one was using stack. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/technisat-usb2.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/media/usb/dvb-usb/technisat-usb2.c b/drivers/media/usb/dvb-usb/technisat-usb2.c index d9f3262bf071..4706628a3ed5 100644 --- a/drivers/media/usb/dvb-usb/technisat-usb2.c +++ b/drivers/media/usb/dvb-usb/technisat-usb2.c @@ -89,9 +89,13 @@ struct technisat_usb2_state { static int technisat_usb2_i2c_access(struct usb_device *udev, u8 device_addr, u8 *tx, u8 txlen, u8 *rx, u8 rxlen) { - u8 b[64]; + u8 *b; int ret, actual_length; + b = kmalloc(64, GFP_KERNEL); + if (!b) + return -ENOMEM; + deb_i2c("i2c-access: %02x, tx: ", device_addr); debug_dump(tx, txlen, deb_i2c); deb_i2c(" "); @@ -123,7 +127,7 @@ static int technisat_usb2_i2c_access(struct usb_device *udev, if (ret < 0) { err("i2c-error: out failed %02x = %d", device_addr, ret); - return -ENODEV; + goto err; } ret = usb_bulk_msg(udev, @@ -131,7 +135,7 @@ static int technisat_usb2_i2c_access(struct usb_device *udev, b, 64, &actual_length, 1000); if (ret < 0) { err("i2c-error: in failed %02x = %d", device_addr, ret); - return -ENODEV; + goto err; } if (b[0] != I2C_STATUS_OK) { @@ -140,7 +144,7 @@ static int technisat_usb2_i2c_access(struct usb_device *udev, if (!(b[0] == I2C_STATUS_NAK && device_addr == 0x60 /* && device_is_technisat_usb2 */)) - return -ENODEV; + goto err; } deb_i2c("status: %d, ", b[0]); @@ -154,7 +158,9 @@ static int technisat_usb2_i2c_access(struct usb_device *udev, deb_i2c("\n"); - return 0; +err: + kfree(b); + return ret; } static int technisat_usb2_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, -- cgit From e2296021081584bd6f0e2ea21e8b909c1d4b5a07 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 13:50:21 -0300 Subject: [media] nova-t-usb2: handle error code on RC query There's no sense on decoding and generating a RC key code if there was an error on the URB control message. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/nova-t-usb2.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/media/usb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c index 26d7188a1163..1babd3341910 100644 --- a/drivers/media/usb/dvb-usb/nova-t-usb2.c +++ b/drivers/media/usb/dvb-usb/nova-t-usb2.c @@ -76,7 +76,7 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { u8 *buf, data, toggle, custom; u16 raw; - int i; + int i, ret; struct dibusb_device_state *st = d->priv; buf = kmalloc(5, GFP_KERNEL); @@ -85,7 +85,9 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) buf[0] = DIBUSB_REQ_POLL_REMOTE; buf[1] = 0x35; - dvb_usb_generic_rw(d, buf, 2, buf, 5, 0); + ret = dvb_usb_generic_rw(d, buf, 2, buf, 5, 0); + if (ret < 0) + goto ret; *state = REMOTE_NO_KEY_PRESSED; switch (buf[0]) { @@ -124,8 +126,9 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) break; } +ret: kfree(buf); - return 0; + return ret; } static int nova_t_read_mac_address (struct dvb_usb_device *d, u8 mac[6]) -- cgit From aa9efbc7b64aa1c3bf6682d06e6970b874d55d08 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 13:55:53 -0300 Subject: [media] dw2102: return error if su3000_power_ctrl() fails Instead of silently ignoring the error, return it. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dw2102.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c index 5fb0c650926e..2c720cb2fb00 100644 --- a/drivers/media/usb/dvb-usb/dw2102.c +++ b/drivers/media/usb/dvb-usb/dw2102.c @@ -852,7 +852,7 @@ static int su3000_power_ctrl(struct dvb_usb_device *d, int i) if (i && !state->initialized) { state->initialized = 1; /* reset board */ - dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0); + return dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0); } return 0; -- cgit From 3dadf91cb830ac3a6992e539d82ec604fffe8671 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 13:52:31 -0300 Subject: [media] digitv: handle error code on RC query There's no sense on decoding and generating a RC key code if there was an error on the URB control message. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/digitv.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c index 09f8c28bd4db..4284f6984dc1 100644 --- a/drivers/media/usb/dvb-usb/digitv.c +++ b/drivers/media/usb/dvb-usb/digitv.c @@ -29,7 +29,9 @@ static int digitv_ctrl_msg(struct dvb_usb_device *d, u8 cmd, u8 vv, u8 *wbuf, int wlen, u8 *rbuf, int rlen) { struct digitv_state *st = d->priv; - int wo = (rbuf == NULL || rlen == 0); /* write-only */ + int ret, wo; + + wo = (rbuf == NULL || rlen == 0); /* write-only */ memset(st->sndbuf, 0, 7); memset(st->rcvbuf, 0, 7); @@ -40,12 +42,12 @@ static int digitv_ctrl_msg(struct dvb_usb_device *d, if (wo) { memcpy(&st->sndbuf[3], wbuf, wlen); - dvb_usb_generic_write(d, st->sndbuf, 7); + ret = dvb_usb_generic_write(d, st->sndbuf, 7); } else { - dvb_usb_generic_rw(d, st->sndbuf, 7, st->rcvbuf, 7, 10); + ret = dvb_usb_generic_rw(d, st->sndbuf, 7, st->rcvbuf, 7, 10); memcpy(rbuf, &st->rcvbuf[3], rlen); } - return 0; + return ret; } /* I2C */ -- cgit From 45ae4a5220a43ae79dacb69054a2c7928dd91c94 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Oct 2016 08:28:26 -0300 Subject: [media] cpia2_usb: don't use stack for DMA The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/cpia2/cpia2_usb.c | 34 ++++++++++++++++++++++++++++++---- 1 file changed, 30 insertions(+), 4 deletions(-) diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c index 13620cdf0599..e9100a235831 100644 --- a/drivers/media/usb/cpia2/cpia2_usb.c +++ b/drivers/media/usb/cpia2/cpia2_usb.c @@ -545,18 +545,30 @@ static void free_sbufs(struct camera_data *cam) static int write_packet(struct usb_device *udev, u8 request, u8 * registers, u16 start, size_t size) { + unsigned char *buf; + int ret; + if (!registers || size <= 0) return -EINVAL; - return usb_control_msg(udev, + buf = kmalloc(size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + memcpy(buf, registers, size); + + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE, start, /* value */ 0, /* index */ - registers, /* buffer */ + buf, /* buffer */ size, HZ); + + kfree(buf); + return ret; } /**************************************************************************** @@ -567,18 +579,32 @@ static int write_packet(struct usb_device *udev, static int read_packet(struct usb_device *udev, u8 request, u8 * registers, u16 start, size_t size) { + unsigned char *buf; + int ret; + if (!registers || size <= 0) return -EINVAL; - return usb_control_msg(udev, + buf = kmalloc(size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), request, USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_DEVICE, start, /* value */ 0, /* index */ - registers, /* buffer */ + buf, /* buffer */ size, HZ); + + if (ret >= 0) + memcpy(registers, buf, size); + + kfree(buf); + + return ret; } /****************************************************************************** -- cgit From db65c49e442cf9c9d9dc950f67daf109609f982a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Oct 2016 11:11:13 -0300 Subject: [media] s2255drv: don't use stack for DMA The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/s2255/s2255drv.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/s2255/s2255drv.c b/drivers/media/usb/s2255/s2255drv.c index c3a0e87066eb..f7bb78c1873c 100644 --- a/drivers/media/usb/s2255/s2255drv.c +++ b/drivers/media/usb/s2255/s2255drv.c @@ -1901,19 +1901,30 @@ static long s2255_vendor_req(struct s2255_dev *dev, unsigned char Request, s32 TransferBufferLength, int bOut) { int r; + unsigned char *buf; + + buf = kmalloc(TransferBufferLength, GFP_KERNEL); + if (!buf) + return -ENOMEM; + if (!bOut) { r = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), Request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - Value, Index, TransferBuffer, + Value, Index, buf, TransferBufferLength, HZ * 5); + + if (r >= 0) + memcpy(TransferBuffer, buf, TransferBufferLength); } else { + memcpy(buf, TransferBuffer, TransferBufferLength); r = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), Request, USB_TYPE_VENDOR | USB_RECIP_DEVICE, - Value, Index, TransferBuffer, + Value, Index, buf, TransferBufferLength, HZ * 5); } + kfree(buf); return r; } -- cgit From b5f93cb5133d3ad517afef541502c6c9aecf8e5d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Oct 2016 11:17:15 -0300 Subject: [media] stk-webcam: don't use stack for DMA The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/stkwebcam/stk-webcam.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c index db200c9d796d..22a9aae16291 100644 --- a/drivers/media/usb/stkwebcam/stk-webcam.c +++ b/drivers/media/usb/stkwebcam/stk-webcam.c @@ -147,20 +147,26 @@ int stk_camera_write_reg(struct stk_camera *dev, u16 index, u8 value) int stk_camera_read_reg(struct stk_camera *dev, u16 index, int *value) { struct usb_device *udev = dev->udev; + unsigned char *buf; int ret; + buf = kmalloc(sizeof(u8), GFP_KERNEL); + if (!buf) + return -ENOMEM; + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x00, index, - (u8 *) value, + buf, sizeof(u8), 500); - if (ret < 0) - return ret; - else - return 0; + if (ret >= 0) + memcpy(value, buf, sizeof(u8)); + + kfree(buf); + return ret; } static int stk_start_stream(struct stk_camera *dev) -- cgit From b430eaba0be5eb7140d0065df96982fa6b5ccc1d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Oct 2016 07:55:54 -0300 Subject: [media] flexcop-usb: don't use stack for DMA The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. While here, remove a dead function calling usb_control_msg(). Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/b2c2/flexcop-usb.c | 105 +++++++++++++++++++++++------------ drivers/media/usb/b2c2/flexcop-usb.h | 4 ++ 2 files changed, 72 insertions(+), 37 deletions(-) diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c index d4bdba60b0f7..52bc42da8a4c 100644 --- a/drivers/media/usb/b2c2/flexcop-usb.c +++ b/drivers/media/usb/b2c2/flexcop-usb.c @@ -73,23 +73,34 @@ static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI, u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR; u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) | (read ? 0x80 : 0); + int ret; + + mutex_lock(&fc_usb->data_mutex); + if (!read) + memcpy(fc_usb->data, val, sizeof(*val)); - int len = usb_control_msg(fc_usb->udev, + ret = usb_control_msg(fc_usb->udev, read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT, request, request_type, /* 0xc0 read or 0x40 write */ wAddress, 0, - val, + fc_usb->data, sizeof(u32), B2C2_WAIT_FOR_OPERATION_RDW * HZ); - if (len != sizeof(u32)) { + if (ret != sizeof(u32)) { err("error while %s dword from %d (%d).", read ? "reading" : "writing", wAddress, wRegOffsPCI); - return -EIO; + if (ret >= 0) + ret = -EIO; } - return 0; + + if (read && ret >= 0) + memcpy(val, fc_usb->data, sizeof(*val)); + mutex_unlock(&fc_usb->data_mutex); + + return ret; } /* * DKT 010817 - add support for V8 memory read/write and flash update @@ -100,9 +111,14 @@ static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb, { u8 request_type = USB_TYPE_VENDOR; u16 wIndex; - int nWaitTime, pipe, len; + int nWaitTime, pipe, ret; wIndex = page << 8; + if (buflen > sizeof(fc_usb->data)) { + err("Buffer size bigger than max URB control message\n"); + return -EIO; + } + switch (req) { case B2C2_USB_READ_V8_MEM: nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ; @@ -127,17 +143,32 @@ static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb, deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n", request_type, req, wAddress, wIndex, buflen); - len = usb_control_msg(fc_usb->udev, pipe, + mutex_lock(&fc_usb->data_mutex); + + if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) + memcpy(fc_usb->data, pbBuffer, buflen); + + ret = usb_control_msg(fc_usb->udev, pipe, req, request_type, wAddress, wIndex, - pbBuffer, + fc_usb->data, buflen, nWaitTime * HZ); + if (ret != buflen) + ret = -EIO; + + if (ret >= 0) { + ret = 0; + if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + memcpy(pbBuffer, fc_usb->data, buflen); + } - debug_dump(pbBuffer, len, deb_v8); - return len == buflen ? 0 : -EIO; + mutex_unlock(&fc_usb->data_mutex); + + debug_dump(pbBuffer, ret, deb_v8); + return ret; } #define bytes_left_to_read_on_page(paddr,buflen) \ @@ -196,29 +227,6 @@ static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended) fc->dvb_adapter.proposed_mac, 6); } -#if 0 -static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set, - flexcop_usb_utility_function_t func, u8 extra, u16 wIndex, - u16 buflen, u8 *pvBuffer) -{ - u16 wValue; - u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR; - int nWaitTime = 2, - pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN, len; - wValue = (func << 8) | extra; - - len = usb_control_msg(fc_usb->udev,pipe, - B2C2_USB_UTILITY, - request_type, - wValue, - wIndex, - pvBuffer, - buflen, - nWaitTime * HZ); - return len == buflen ? 0 : -EIO; -} -#endif - /* usb i2c stuff */ static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c, flexcop_usb_request_t req, flexcop_usb_i2c_function_t func, @@ -226,9 +234,14 @@ static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c, { struct flexcop_usb *fc_usb = i2c->fc->bus_specific; u16 wValue, wIndex; - int nWaitTime,pipe,len; + int nWaitTime, pipe, ret; u8 request_type = USB_TYPE_VENDOR; + if (buflen > sizeof(fc_usb->data)) { + err("Buffer size bigger than max URB control message\n"); + return -EIO; + } + switch (func) { case USB_FUNC_I2C_WRITE: case USB_FUNC_I2C_MULTIWRITE: @@ -257,15 +270,32 @@ static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c, wValue & 0xff, wValue >> 8, wIndex & 0xff, wIndex >> 8); - len = usb_control_msg(fc_usb->udev,pipe, + mutex_lock(&fc_usb->data_mutex); + + if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) + memcpy(fc_usb->data, buf, buflen); + + ret = usb_control_msg(fc_usb->udev, pipe, req, request_type, wValue, wIndex, - buf, + fc_usb->data, buflen, nWaitTime * HZ); - return len == buflen ? 0 : -EREMOTEIO; + + if (ret != buflen) + ret = -EIO; + + if (ret >= 0) { + ret = 0; + if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + memcpy(buf, fc_usb->data, buflen); + } + + mutex_unlock(&fc_usb->data_mutex); + + return 0; } /* actual bus specific access functions, @@ -516,6 +546,7 @@ static int flexcop_usb_probe(struct usb_interface *intf, /* general flexcop init */ fc_usb = fc->bus_specific; fc_usb->fc_dev = fc; + mutex_init(&fc_usb->data_mutex); fc->read_ibi_reg = flexcop_usb_read_ibi_reg; fc->write_ibi_reg = flexcop_usb_write_ibi_reg; diff --git a/drivers/media/usb/b2c2/flexcop-usb.h b/drivers/media/usb/b2c2/flexcop-usb.h index 92529a9c4475..25ad43166e78 100644 --- a/drivers/media/usb/b2c2/flexcop-usb.h +++ b/drivers/media/usb/b2c2/flexcop-usb.h @@ -29,6 +29,10 @@ struct flexcop_usb { u8 tmp_buffer[1023+190]; int tmp_buffer_length; + + /* for URB control messages */ + u8 data[80]; + struct mutex data_mutex; }; #if 0 -- cgit From 59dde8e70cfb7afbc1b647d7d3440dfb9a78b431 Mon Sep 17 00:00:00 2001 From: kbuild test robot Date: Tue, 11 Oct 2016 10:22:08 -0300 Subject: [media] pctv452e: fix semicolon.cocci warnings drivers/media/usb/dvb-usb/pctv452e.c:115:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by: Fengguang Wu Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/pctv452e.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/usb/dvb-usb/pctv452e.c b/drivers/media/usb/dvb-usb/pctv452e.c index 7ad0006c5ae0..07fa08be9e99 100644 --- a/drivers/media/usb/dvb-usb/pctv452e.c +++ b/drivers/media/usb/dvb-usb/pctv452e.c @@ -112,7 +112,7 @@ static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, if (!data || (write_len > 64 - 4) || (read_len > 64 - 4)) { err("%s: transfer data invalid", __func__); return -EIO; - }; + } mutex_lock(&state->ca_mutex); id = state->c++; -- cgit From 4a262b14c57d6ec88982d40273e742f7b9151560 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Wed, 12 Oct 2016 20:31:41 +0800 Subject: clk: rockchip: don't return NULL when failing to register ddrclk branch rockchip_clk_register_ddrclk should not return NULL when failing to call clk_register, otherwise rockchip_clk_register_branches prints "unknown clock type". The actual case is that it's a known clock type but we fail to register it, which may makes user confuse the reason of failure. And the pr_err here is pointless as rockchip_clk_register_branches will also print the similar message. Signed-off-by: Shawn Lin Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-ddr.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/clk/rockchip/clk-ddr.c b/drivers/clk/rockchip/clk-ddr.c index 8feba93672c5..e8075359366b 100644 --- a/drivers/clk/rockchip/clk-ddr.c +++ b/drivers/clk/rockchip/clk-ddr.c @@ -144,11 +144,8 @@ struct clk *rockchip_clk_register_ddrclk(const char *name, int flags, ddrclk->ddr_flag = ddr_flag; clk = clk_register(NULL, &ddrclk->hw); - if (IS_ERR(clk)) { - pr_err("%s: could not register ddrclk %s\n", __func__, name); + if (IS_ERR(clk)) kfree(ddrclk); - return NULL; - } return clk; } -- cgit From 3e3affe549ebd228501d160886c1b3999d99e0c6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 22 Sep 2016 11:50:52 +0200 Subject: drm/imx: hide an unused label The imx_drm_bind function causes a warning in linux-next when CONFIG_DRM_FBDEV_EMULATION is not set: drivers/gpu/drm/imx/imx-drm-core.c: In function 'imx_drm_bind': drivers/gpu/drm/imx/imx-drm-core.c:441:1: error: label 'err_unbind' defined but not used [-Werror=unused-label] I don't understand why the warning only showed up now, as the code has not been modified recently, but there is an obvious fix in adding another #if for the symbol. Signed-off-by: Arnd Bergmann Fixes: c1ff5a7aa3c3 ("drm/imx: Remove local fbdev emulation Kconfig option") Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-drm-core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/imx/imx-drm-core.c b/drivers/gpu/drm/imx/imx-drm-core.c index 98df09c2b388..b084c571b23f 100644 --- a/drivers/gpu/drm/imx/imx-drm-core.c +++ b/drivers/gpu/drm/imx/imx-drm-core.c @@ -436,9 +436,11 @@ static int imx_drm_bind(struct device *dev) err_fbhelper: drm_kms_helper_poll_fini(drm); +#if IS_ENABLED(CONFIG_DRM_FBDEV_EMULATION) if (imxdrm->fbhelper) drm_fbdev_cma_fini(imxdrm->fbhelper); err_unbind: +#endif component_unbind_all(drm->dev, drm); err_vblank: drm_vblank_cleanup(drm); -- cgit From 4ad3e92c28057950c30ca19e32530eff9ee111bb Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 21 Sep 2016 15:12:24 +0000 Subject: gpu: ipu-v3: Use ERR_CAST instead of ERR_PTR(PTR_ERR()) Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)). Generated by: scripts/coccinelle/api/err_cast.cocci Signed-off-by: Wei Yongjun Signed-off-by: Philipp Zabel --- drivers/gpu/ipu-v3/ipu-image-convert.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/ipu-v3/ipu-image-convert.c b/drivers/gpu/ipu-v3/ipu-image-convert.c index 2ba7d437a2af..805b6fa7b5f4 100644 --- a/drivers/gpu/ipu-v3/ipu-image-convert.c +++ b/drivers/gpu/ipu-v3/ipu-image-convert.c @@ -1617,7 +1617,7 @@ ipu_image_convert(struct ipu_soc *ipu, enum ipu_ic_task ic_task, ctx = ipu_image_convert_prepare(ipu, ic_task, in, out, rot_mode, complete, complete_context); if (IS_ERR(ctx)) - return ERR_PTR(PTR_ERR(ctx)); + return ERR_CAST(ctx); run = kzalloc(sizeof(*run), GFP_KERNEL); if (!run) { -- cgit From 4547f4d8ffd63ba4ac129f9136027bd14b729101 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Fri, 23 Sep 2016 14:05:04 -0700 Subject: Btrfs: kill BUG_ON in do_relocation While updating btree, we try to push items between sibling nodes/leaves in order to keep height as low as possible. But we don't memset the original places with zero when pushing items so that we could end up leaving stale content in nodes/leaves. One may read the above stale content by increasing btree blocks' @nritems. One case I've come across is that in fs tree, a leaf has two parent nodes, hence running balance ends up with processing this leaf with two parent nodes, but it can only reach the valid parent node through btrfs_search_slot, so it'd be like, do_relocation for P in all parent nodes of block A: if !P->eb: btrfs_search_slot(key); --> get path from P to A. if lowest: BUG_ON(A->bytenr != bytenr of A recorded in P); btrfs_cow_block(P, A); --> change A's bytenr in P. After btrfs_cow_block, P has the new bytenr of A, but with the same @key, we get the same path again, and get panic by BUG_ON. Note that this is only happening in a corrupted fs, for a regular fs in which we have correct @nritems so that we won't read stale content in any case. Reviewed-by: Josef Bacik Signed-off-by: Liu Bo Signed-off-by: David Sterba --- fs/btrfs/relocation.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 0ec8ffa37ab0..c4af0cdb783d 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -2728,7 +2728,14 @@ static int do_relocation(struct btrfs_trans_handle *trans, bytenr = btrfs_node_blockptr(upper->eb, slot); if (lowest) { - BUG_ON(bytenr != node->bytenr); + if (bytenr != node->bytenr) { + btrfs_err(root->fs_info, + "lowest leaf/node mismatch: bytenr %llu node->bytenr %llu slot %d upper %llu", + bytenr, node->bytenr, slot, + upper->eb->start); + err = -EIO; + goto next; + } } else { if (node->eb->start == bytenr) goto next; -- cgit From 1aeb5b615cd10db7324d4e4d167c4916dfeca311 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 12 Oct 2016 08:21:43 -0300 Subject: [media] radio-bcm2048: don't ignore errors Remove this warning: drivers/staging/media/bcm2048/radio-bcm2048.c: In function 'bcm2048_set_rds_no_lock': drivers/staging/media/bcm2048/radio-bcm2048.c:467:6: warning: variable 'err' set but not used [-Wunused-but-set-variable] int err; ^~~ By returning the error code. Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/bcm2048/radio-bcm2048.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/media/bcm2048/radio-bcm2048.c b/drivers/staging/media/bcm2048/radio-bcm2048.c index 8dade197f053..0f088405e186 100644 --- a/drivers/staging/media/bcm2048/radio-bcm2048.c +++ b/drivers/staging/media/bcm2048/radio-bcm2048.c @@ -482,6 +482,8 @@ static int bcm2048_set_rds_no_lock(struct bcm2048_device *bdev, u8 rds_on) flags); memset(&bdev->rds_info, 0, sizeof(bdev->rds_info)); } + if (err) + return err; err = bcm2048_send_command(bdev, BCM2048_I2C_FM_RDS_SYSTEM, bdev->cache_fm_rds_system); -- cgit From 43daa01323da37a3692cabe1579ef5c2c4372e06 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Mon, 10 Oct 2016 14:50:06 +0800 Subject: drm/imx: ipuv3-plane: Switch EBA buffer only when we don't need modeset We added active plane reconfiguration support by forcing a full modeset operation. So, looking at old_plane_state->fb to determine whether we need to switch EBA buffer(for hardware double buffering) in ipu_plane_atomic_set_base() or not is no more correct. Instead, we should do that only when we don't need modeset, otherwise, we initialize the two EBA buffers with the buffer address. Fixes: c6c1f9bc798b ("drm/imx: Add active plane reconfiguration support") Cc: stable@vger.kernel.org # 4.8 Signed-off-by: Liu Ying Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-plane.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index ce22d0a0ddc8..f5861d9b0df7 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -108,6 +108,7 @@ static void ipu_plane_atomic_set_base(struct ipu_plane *ipu_plane, { struct drm_plane *plane = &ipu_plane->base; struct drm_plane_state *state = plane->state; + struct drm_crtc_state *crtc_state = state->crtc->state; struct drm_framebuffer *fb = state->fb; unsigned long eba, ubo, vbo; int active; @@ -149,7 +150,7 @@ static void ipu_plane_atomic_set_base(struct ipu_plane *ipu_plane, break; } - if (old_state->fb) { + if (!drm_atomic_crtc_needs_modeset(crtc_state)) { active = ipu_idmac_get_current_buffer(ipu_plane->ipu_ch); ipu_cpmem_set_buffer(ipu_plane->ipu_ch, !active, eba); ipu_idmac_select_buffer(ipu_plane->ipu_ch, !active); -- cgit From 81d553545a1510ff7c7c00cbc9b57d6172d411a4 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Mon, 10 Oct 2016 14:50:07 +0800 Subject: drm/imx: ipuv3-plane: Skip setting u/vbo only when we don't need modeset We added active plane reconfiguration support by forcing a full modeset operation. So, looking at old_plane_state->fb to determine whether we need to set u/v offset(aka, u/vbo for IPUv3) in ipu_plane_atomic_set_base() or not is no more correct. Instead, we should do that only when we don't need modeset. Fixes: c6c1f9bc798b ("drm/imx: Add active plane reconfiguration support") Cc: stable@vger.kernel.org # 4.8 Signed-off-by: Liu Ying Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-plane.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index f5861d9b0df7..cfb34b595d15 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -103,8 +103,7 @@ drm_plane_state_to_vbo(struct drm_plane_state *state) (state->src_x >> 16) / 2 - eba; } -static void ipu_plane_atomic_set_base(struct ipu_plane *ipu_plane, - struct drm_plane_state *old_state) +static void ipu_plane_atomic_set_base(struct ipu_plane *ipu_plane) { struct drm_plane *plane = &ipu_plane->base; struct drm_plane_state *state = plane->state; @@ -118,7 +117,7 @@ static void ipu_plane_atomic_set_base(struct ipu_plane *ipu_plane, switch (fb->pixel_format) { case DRM_FORMAT_YUV420: case DRM_FORMAT_YVU420: - if (old_state->fb) + if (!drm_atomic_crtc_needs_modeset(crtc_state)) break; /* @@ -393,7 +392,7 @@ static void ipu_plane_atomic_update(struct drm_plane *plane, struct drm_crtc_state *crtc_state = state->crtc->state; if (!drm_atomic_crtc_needs_modeset(crtc_state)) { - ipu_plane_atomic_set_base(ipu_plane, old_state); + ipu_plane_atomic_set_base(ipu_plane); return; } } @@ -438,7 +437,7 @@ static void ipu_plane_atomic_update(struct drm_plane *plane, ipu_cpmem_set_high_priority(ipu_plane->ipu_ch); ipu_idmac_set_double_buffer(ipu_plane->ipu_ch, 1); ipu_cpmem_set_stride(ipu_plane->ipu_ch, state->fb->pitches[0]); - ipu_plane_atomic_set_base(ipu_plane, old_state); + ipu_plane_atomic_set_base(ipu_plane); ipu_plane_enable(ipu_plane); } -- cgit From 8cca354816adacb91280e19c50f81ffddc0460a4 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 13 Oct 2016 11:53:21 +0300 Subject: drm/imx: drm_dev_alloc() returns error pointers We are checking for NULL here, when we should be checking for error pointers. Fixes: 54db5decce17 ("drm/imx: drop deprecated load/unload drm_driver ops") Signed-off-by: Dan Carpenter Reviewed-by: Lucas Stach Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-drm-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/imx/imx-drm-core.c b/drivers/gpu/drm/imx/imx-drm-core.c index b084c571b23f..9672b579f950 100644 --- a/drivers/gpu/drm/imx/imx-drm-core.c +++ b/drivers/gpu/drm/imx/imx-drm-core.c @@ -357,8 +357,8 @@ static int imx_drm_bind(struct device *dev) int ret; drm = drm_dev_alloc(&imx_drm_driver, dev); - if (!drm) - return -ENOMEM; + if (IS_ERR(drm)) + return PTR_ERR(drm); imxdrm = devm_kzalloc(dev, sizeof(*imxdrm), GFP_KERNEL); if (!imxdrm) { -- cgit From e73aca5184ad9fc948ba22b4d35dce11db35bb25 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Tue, 18 Oct 2016 16:44:03 +0800 Subject: drm/imx: ipuv3-plane: Access old u/vbo properly in ->atomic_check for YU12/YV12 Before accessing the u/v offset(aka, u/vbo for IPUv3) of the old plane state's relevant fb, we should make sure the fb is in YU12 or YV12 pixel format(which are the two YUV pixel formats we support only), otherwise, we are likely to trigger BUG_ON() in drm_plane_state_to_u/vbo() since the fb's pixel format is probably not YU12 or YV12. Link: https://bugs.freedesktop.org/show_bug.cgi?id=98150 Fixes: c6c1f9bc798b ("drm/imx: Add active plane reconfiguration support") Cc: stable@vger.kernel.org # 4.8 Signed-off-by: Liu Ying Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-plane.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index cfb34b595d15..5c342997863e 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -355,7 +355,9 @@ static int ipu_plane_atomic_check(struct drm_plane *plane, if ((ubo > 0xfffff8) || (vbo > 0xfffff8)) return -EINVAL; - if (old_fb) { + if (old_fb && + (old_fb->pixel_format == DRM_FORMAT_YUV420 || + old_fb->pixel_format == DRM_FORMAT_YVU420)) { old_ubo = drm_plane_state_to_ubo(old_state); old_vbo = drm_plane_state_to_vbo(old_state); if (ubo != old_ubo || vbo != old_vbo) -- cgit From faead41cc7213ccef5a58c1bf518ac24816fe8a6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 22 Sep 2016 10:31:41 +0200 Subject: iwlwifi: pcie: mark command queue lock with separate lockdep class Emmanuel reports that when CMD_WANT_ASYNC_CALLBACK is used by mvm, the callback will be called with the command queue lock held, and mvm will try to stop all (other) TX queues, which acquires their locks - this caused a false lockdep recursive locking report. Suppress this report by marking the command queue lock with a new, separate, lock class so lockdep can tell the difference between the two types of queues. Fixes: 156f92f2b471 ("iwlwifi: block the queues when we send ADD_STA for uAPSD") Reported-by: Emmanuel Grumbach Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/tx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c index e9a278b60dfd..5f840f16f40b 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c @@ -592,6 +592,7 @@ error: static int iwl_pcie_txq_init(struct iwl_trans *trans, struct iwl_txq *txq, int slots_num, u32 txq_id) { + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); int ret; txq->need_update = false; @@ -606,6 +607,13 @@ static int iwl_pcie_txq_init(struct iwl_trans *trans, struct iwl_txq *txq, return ret; spin_lock_init(&txq->lock); + + if (txq_id == trans_pcie->cmd_queue) { + static struct lock_class_key iwl_pcie_cmd_queue_lock_class; + + lockdep_set_class(&txq->lock, &iwl_pcie_cmd_queue_lock_class); + } + __skb_queue_head_init(&txq->overflow_q); /* -- cgit From 276c4b4b74b6d5bc3cab35534409f3ad32464b78 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Wed, 28 Sep 2016 11:32:35 +0300 Subject: iwlwifi: mvm: use ssize_t for len in iwl_debugfs_mem_read() In iwl_dbgfs_mem_read(), the len variable may become negative and is compared to < 0 (an error case). Comparing size_t (which is unsigned) to < 0 causes a warning on certain platforms (like i386): drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c:1561:5-8: WARNING: Unsigned expression compared with zero: len < 0 To prevent that, use ssize_t for len instead. Fixes: commit 2b55f43f8e47 ("iwlwifi: mvm: Add mem debugfs entry") Reported-by: kbuild test robot Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c index 539d718df797..06805a63f091 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c @@ -1529,8 +1529,8 @@ static ssize_t iwl_dbgfs_mem_read(struct file *file, char __user *user_buf, .data = { &cmd, }, .len = { sizeof(cmd) }, }; - size_t delta, len; - ssize_t ret; + size_t delta; + ssize_t ret, len; hcmd.id = iwl_cmd_id(*ppos >> 24 ? UMAC_RD_WR : LMAC_RD_WR, DEBUG_GROUP, 0); -- cgit From 85cd69b8f1f7e289fe931a82889e673fd0f04842 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Wed, 5 Oct 2016 11:24:12 +0300 Subject: iwlwifi: mvm: fix d3_test with unified D0/D3 images When a unified D0/D3 image is used, we don't restart the FW in the D0->D3->D0 transitions. Therefore, the d3_test functionality should not call ieee8021_restart_hw() when the resuming either. Fixes: commit 23ae61282b88 ("iwlwifi: mvm: Do not switch to D3 image on suspend") Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c index 4fdc3dad3e85..0e17cb238643 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c @@ -2271,7 +2271,8 @@ static void iwl_mvm_d3_test_disconn_work_iter(void *_data, u8 *mac, static int iwl_mvm_d3_test_release(struct inode *inode, struct file *file) { struct iwl_mvm *mvm = inode->i_private; - int remaining_time = 10; + bool unified_image = fw_has_capa(&mvm->fw->ucode_capa, + IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG); mvm->d3_test_active = false; @@ -2282,17 +2283,21 @@ static int iwl_mvm_d3_test_release(struct inode *inode, struct file *file) mvm->trans->system_pm_mode = IWL_PLAT_PM_MODE_DISABLED; iwl_abort_notification_waits(&mvm->notif_wait); - ieee80211_restart_hw(mvm->hw); + if (!unified_image) { + int remaining_time = 10; - /* wait for restart and disconnect all interfaces */ - while (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status) && - remaining_time > 0) { - remaining_time--; - msleep(1000); - } + ieee80211_restart_hw(mvm->hw); + + /* wait for restart and disconnect all interfaces */ + while (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status) && + remaining_time > 0) { + remaining_time--; + msleep(1000); + } - if (remaining_time == 0) - IWL_ERR(mvm, "Timed out waiting for HW restart to finish!\n"); + if (remaining_time == 0) + IWL_ERR(mvm, "Timed out waiting for HW restart!\n"); + } ieee80211_iterate_active_interfaces_atomic( mvm->hw, IEEE80211_IFACE_ITER_NORMAL, -- cgit From 5bfadc8255e2cd92be7538fd7dfa777c27f58be0 Mon Sep 17 00:00:00 2001 From: Haim Dreyfuss Date: Mon, 12 Sep 2016 10:24:19 +0300 Subject: iwlwifi: mvm: comply with fw_restart mod param on suspend If the suspend flow fails, we restart the hardware to go back to the D0 image (with non-unified images), but we don't comply with the fw_restart module parameter. If something goes wrong when starting the D3 image, we may want to debug it, so we should comply with the fw_restart flag to avoid clearing everything up and losing the firmware state when the error occurred. Signed-off-by: Haim Dreyfuss Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c index 0e17cb238643..03a8fc586548 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c @@ -1254,7 +1254,10 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw, out: if (ret < 0) { iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN); - ieee80211_restart_hw(mvm->hw); + if (mvm->restart_fw > 0) { + mvm->restart_fw--; + ieee80211_restart_hw(mvm->hw); + } iwl_mvm_free_nd(mvm); } out_noreset: -- cgit From 3a732c65de427fdae67a243fd331356034b5a1e8 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Sun, 9 Oct 2016 17:34:24 +0300 Subject: iwlwifi: mvm: wake the wait queue when the RX sync counter is zero When we sync the RX queues the driver waits to receive echo notification on all the RX queues. The wait queue is set with timeout until all queues have received the notification. However, iwl_mvm_rx_queue_notif() never woke up the wait queue, with the result of the counter value being checked only when the timeout expired. This may cause a latency of up to 1 second. Fixes: 0636b938214c ("iwlwifi: mvm: implement driver RX queues sync command") Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 3 +-- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 1 + drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 1 + drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 3 ++- 4 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 318efd814037..1db1dc13e988 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -4121,7 +4121,6 @@ void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm, struct iwl_mvm_internal_rxq_notif *notif, u32 size) { - DECLARE_WAIT_QUEUE_HEAD_ONSTACK(notif_waitq); u32 qmask = BIT(mvm->trans->num_rx_queues) - 1; int ret; @@ -4143,7 +4142,7 @@ void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm, } if (notif->sync) - ret = wait_event_timeout(notif_waitq, + ret = wait_event_timeout(mvm->rx_sync_waitq, atomic_read(&mvm->queue_sync_counter) == 0, HZ); WARN_ON_ONCE(!ret); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index d17cbf603f7c..c60703e0c246 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -937,6 +937,7 @@ struct iwl_mvm { /* sync d0i3_tx queue and IWL_MVM_STATUS_IN_D0I3 status flag */ spinlock_t d0i3_tx_lock; wait_queue_head_t d0i3_exit_waitq; + wait_queue_head_t rx_sync_waitq; /* BT-Coex */ struct iwl_bt_coex_profile_notif last_bt_notif; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c index 05fe6dd1a2c8..4d35deb628bc 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c @@ -619,6 +619,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg, spin_lock_init(&mvm->refs_lock); skb_queue_head_init(&mvm->d0i3_tx); init_waitqueue_head(&mvm->d0i3_exit_waitq); + init_waitqueue_head(&mvm->rx_sync_waitq); atomic_set(&mvm->queue_sync_counter, 0); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index a57c6ef5bc14..6c802cee900c 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -547,7 +547,8 @@ void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, "Received expired RX queue sync message\n"); return; } - atomic_dec(&mvm->queue_sync_counter); + if (!atomic_dec_return(&mvm->queue_sync_counter)) + wake_up(&mvm->rx_sync_waitq); } switch (internal_notif->type) { -- cgit From aa156c8aee22a24865bf94d0c4a5f604f687fa7d Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Fri, 14 Oct 2016 10:15:35 -0300 Subject: rtc: asm9260: fix module autoload If the driver is built as a module, autoload won't work because the module alias information is not filled so user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/rtc/rtc-asm9260.ko | grep alias $ After this patch: $ modinfo drivers/rtc/rtc-asm9260.ko | grep alias alias: of:N*T*Calphascale,asm9260-rtcC* alias: of:N*T*Calphascale,asm9260-rtc Signed-off-by: Javier Martinez Canillas Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-asm9260.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/rtc/rtc-asm9260.c b/drivers/rtc/rtc-asm9260.c index 18a93d3e3f93..d36534965635 100644 --- a/drivers/rtc/rtc-asm9260.c +++ b/drivers/rtc/rtc-asm9260.c @@ -327,6 +327,7 @@ static const struct of_device_id asm9260_dt_ids[] = { { .compatible = "alphascale,asm9260-rtc", }, {} }; +MODULE_DEVICE_TABLE(of, asm9260_dt_ids); static struct platform_driver asm9260_rtc_driver = { .probe = asm9260_rtc_probe, -- cgit From a3a0673b9db6fad2a3f7874c34e4b5cbc5fa01c6 Mon Sep 17 00:00:00 2001 From: LABBE Corentin Date: Tue, 18 Oct 2016 16:39:54 +0200 Subject: rtc: cmos: remove all __exit_p annotations I got the following stack trace under qemu: [ 7.575243] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 7.596098] IP: [] cmos_set_alarm+0x38/0x280 [ 7.615699] PGD 3ccbe067 [ 7.615923] PUD 3daf2067 [ 7.635156] PMD 0 [ 7.654358] Oops: 0000 [#1] SMP [ 7.673869] Modules linked in: [ 7.693235] CPU: 0 PID: 1701 Comm: hwclock Tainted: G W 4.9.0-rc1+ #24 [ 7.712455] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 [ 7.753569] task: ffff88003d88dc40 task.stack: ffffc90000224000 [ 7.773743] RIP: 0010:[] [] cmos_set_alarm+0x38/0x280 [ 7.794893] RSP: 0018:ffffc90000227c10 EFLAGS: 00010296 [ 7.815890] RAX: 000000000000001d RBX: ffffc90000227d28 RCX: ffffffff8182be78 [ 7.836057] RDX: 0000000000000001 RSI: 0000000000000202 RDI: 0000000000000202 [ 7.856612] RBP: ffffc90000227c48 R08: 0000000000000000 R09: 0000000000000001 [ 7.877561] R10: 00000000000001c0 R11: 00000000000001c0 R12: 0000000000000000 [ 7.897072] R13: ffff88003d96f400 R14: ffff88003dac6410 R15: ffff88003dac6420 [ 7.917403] FS: 00007f77f42d9700(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 7.938293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.958364] CR2: 0000000000000010 CR3: 000000003ccbb000 CR4: 00000000000006f0 [ 7.978028] Stack: [ 7.997120] ffff88003dac6000 ffff88003dac6410 0000000058049d01 ffffc90000227d28 [ 8.016993] ffff88003dac6000 ffff88003dac6410 ffff88003dac6420 ffffc90000227c98 [ 8.039505] ffffffff814f225d 0000001800227c98 000000090000002a 0000000900000011 [ 8.059985] Call Trace: [ 8.080110] [] __rtc_set_alarm+0x8d/0xa0 [ 8.099421] [] rtc_timer_enqueue+0x119/0x190 [ 8.119925] [] rtc_update_irq_enable+0xbe/0x100 [ 8.140583] [] rtc_dev_ioctl+0x3c0/0x480 [ 8.161162] [] ? user_path_at_empty+0x3a/0x50 [ 8.182717] [] do_vfs_ioctl+0x96/0x5c0 [ 8.204624] [] ? vfs_stat+0x16/0x20 [ 8.225994] [] ? SyS_newstat+0x15/0x30 [ 8.247043] [] SyS_ioctl+0x47/0x80 [ 8.267191] [] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 8.288719] Code: 6a 81 48 89 e5 41 57 41 56 41 55 49 89 fd 41 54 53 48 89 f3 48 c7 c6 20 c4 78 81 48 83 ec 10 e8 8f 00 ef ff 4d 8b a5 a0 00 00 00 <41> 8b 44 24 10 85 c0 0f 8e 2b 02 00 00 4c 89 ef 31 c0 b9 53 01 [ 8.335233] RIP [] cmos_set_alarm+0x38/0x280 [ 8.357096] RSP [ 8.379051] CR2: 0000000000000010 [ 8.401736] ---[ end trace 5cbcd83a1f225ed3 ]--- This occur only when CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled and CONFIG_RTC_DRV_CMOS builtin. When cmos_set_alarm() is called dev is NULL and so trigger the deref via cmos->irq The problem comes from that the device is removed but no remove function are called due to _exit_p(). This patch remove all _exit_p() annotation. Signed-off-by: Corentin Labbe Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-cmos.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index dd3d59806ffa..6f0e12e66296 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -776,7 +776,7 @@ static void cmos_do_shutdown(int rtc_irq) spin_unlock_irq(&rtc_lock); } -static void __exit cmos_do_remove(struct device *dev) +static void cmos_do_remove(struct device *dev) { struct cmos_rtc *cmos = dev_get_drvdata(dev); struct resource *ports; @@ -1129,7 +1129,7 @@ static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) pnp_irq(pnp, 0)); } -static void __exit cmos_pnp_remove(struct pnp_dev *pnp) +static void cmos_pnp_remove(struct pnp_dev *pnp) { cmos_do_remove(&pnp->dev); } @@ -1161,7 +1161,7 @@ static struct pnp_driver cmos_pnp_driver = { .name = (char *) driver_name, .id_table = rtc_ids, .probe = cmos_pnp_probe, - .remove = __exit_p(cmos_pnp_remove), + .remove = cmos_pnp_remove, .shutdown = cmos_pnp_shutdown, /* flag ensures resume() gets called, and stops syslog spam */ @@ -1238,7 +1238,7 @@ static int __init cmos_platform_probe(struct platform_device *pdev) return cmos_do_probe(&pdev->dev, resource, irq); } -static int __exit cmos_platform_remove(struct platform_device *pdev) +static int cmos_platform_remove(struct platform_device *pdev) { cmos_do_remove(&pdev->dev); return 0; @@ -1263,7 +1263,7 @@ static void cmos_platform_shutdown(struct platform_device *pdev) MODULE_ALIAS("platform:rtc_cmos"); static struct platform_driver cmos_platform_driver = { - .remove = __exit_p(cmos_platform_remove), + .remove = cmos_platform_remove, .shutdown = cmos_platform_shutdown, .driver = { .name = driver_name, -- cgit From e0d9727c111a5917a1184c71c1a8e6f78c7fc41d Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Thu, 13 Oct 2016 10:07:07 +0300 Subject: iwlwifi: pcie: fix SPLC structure parsing The SPLC data parsing is too restrictive and was not trying find the correct element for WiFi. This causes problems with some BIOSes where the SPLC method exists, but doesn't have a WiFi entry on the first element of the list. The domain type values are also incorrect according to the specification. Fix this by complying with the actual specification. Additionally, replace all occurrences of SPLX to SPLC, since SPLX is only a structure internal to the ACPI tables, and may not even exist. Fixes: bcb079a14d75 ("iwlwifi: pcie: retrieve and parse ACPI power limitations") Reported-by: Chris Rorvick Tested-by: Paul Bolle Tested-by: Chris Rorvick Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 79 ++++++++++++++++----------- 1 file changed, 48 insertions(+), 31 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index 001be406a3d3..2f8134b2a504 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -541,48 +541,64 @@ static const struct pci_device_id iwl_hw_card_ids[] = { MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids); #ifdef CONFIG_ACPI -#define SPL_METHOD "SPLC" -#define SPL_DOMAINTYPE_MODULE BIT(0) -#define SPL_DOMAINTYPE_WIFI BIT(1) -#define SPL_DOMAINTYPE_WIGIG BIT(2) -#define SPL_DOMAINTYPE_RFEM BIT(3) +#define ACPI_SPLC_METHOD "SPLC" +#define ACPI_SPLC_DOMAIN_WIFI (0x07) -static u64 splx_get_pwr_limit(struct iwl_trans *trans, union acpi_object *splx) +static u64 splc_get_pwr_limit(struct iwl_trans *trans, union acpi_object *splc) { - union acpi_object *limits, *domain_type, *power_limit; - - if (splx->type != ACPI_TYPE_PACKAGE || - splx->package.count != 2 || - splx->package.elements[0].type != ACPI_TYPE_INTEGER || - splx->package.elements[0].integer.value != 0) { - IWL_ERR(trans, "Unsupported splx structure\n"); + union acpi_object *data_pkg, *dflt_pwr_limit; + int i; + + /* We need at least two elements, one for the revision and one + * for the data itself. Also check that the revision is + * supported (currently only revision 0). + */ + if (splc->type != ACPI_TYPE_PACKAGE || + splc->package.count < 2 || + splc->package.elements[0].type != ACPI_TYPE_INTEGER || + splc->package.elements[0].integer.value != 0) { + IWL_DEBUG_INFO(trans, + "Unsupported structure returned by the SPLC method. Ignoring.\n"); return 0; } - limits = &splx->package.elements[1]; - if (limits->type != ACPI_TYPE_PACKAGE || - limits->package.count < 2 || - limits->package.elements[0].type != ACPI_TYPE_INTEGER || - limits->package.elements[1].type != ACPI_TYPE_INTEGER) { - IWL_ERR(trans, "Invalid limits element\n"); - return 0; + /* loop through all the packages to find the one for WiFi */ + for (i = 1; i < splc->package.count; i++) { + union acpi_object *domain; + + data_pkg = &splc->package.elements[i]; + + /* Skip anything that is not a package with the right + * amount of elements (i.e. at least 2 integers). + */ + if (data_pkg->type != ACPI_TYPE_PACKAGE || + data_pkg->package.count < 2 || + data_pkg->package.elements[0].type != ACPI_TYPE_INTEGER || + data_pkg->package.elements[1].type != ACPI_TYPE_INTEGER) + continue; + + domain = &data_pkg->package.elements[0]; + if (domain->integer.value == ACPI_SPLC_DOMAIN_WIFI) + break; + + data_pkg = NULL; } - domain_type = &limits->package.elements[0]; - power_limit = &limits->package.elements[1]; - if (!(domain_type->integer.value & SPL_DOMAINTYPE_WIFI)) { - IWL_DEBUG_INFO(trans, "WiFi power is not limited\n"); + if (!data_pkg) { + IWL_DEBUG_INFO(trans, + "No element for the WiFi domain returned by the SPLC method.\n"); return 0; } - return power_limit->integer.value; + dflt_pwr_limit = &data_pkg->package.elements[1]; + return dflt_pwr_limit->integer.value; } static void set_dflt_pwr_limit(struct iwl_trans *trans, struct pci_dev *pdev) { acpi_handle pxsx_handle; acpi_handle handle; - struct acpi_buffer splx = {ACPI_ALLOCATE_BUFFER, NULL}; + struct acpi_buffer splc = {ACPI_ALLOCATE_BUFFER, NULL}; acpi_status status; pxsx_handle = ACPI_HANDLE(&pdev->dev); @@ -593,23 +609,24 @@ static void set_dflt_pwr_limit(struct iwl_trans *trans, struct pci_dev *pdev) } /* Get the method's handle */ - status = acpi_get_handle(pxsx_handle, (acpi_string)SPL_METHOD, &handle); + status = acpi_get_handle(pxsx_handle, (acpi_string)ACPI_SPLC_METHOD, + &handle); if (ACPI_FAILURE(status)) { - IWL_DEBUG_INFO(trans, "SPL method not found\n"); + IWL_DEBUG_INFO(trans, "SPLC method not found\n"); return; } /* Call SPLC with no arguments */ - status = acpi_evaluate_object(handle, NULL, NULL, &splx); + status = acpi_evaluate_object(handle, NULL, NULL, &splc); if (ACPI_FAILURE(status)) { IWL_ERR(trans, "SPLC invocation failed (0x%x)\n", status); return; } - trans->dflt_pwr_limit = splx_get_pwr_limit(trans, splx.pointer); + trans->dflt_pwr_limit = splc_get_pwr_limit(trans, splc.pointer); IWL_DEBUG_INFO(trans, "Default power limit set to %lld\n", trans->dflt_pwr_limit); - kfree(splx.pointer); + kfree(splc.pointer); } #else /* CONFIG_ACPI */ -- cgit From 5a143db8c4a28dab6423cb6197e9f1389da375f2 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Wed, 5 Oct 2016 09:28:53 +0300 Subject: iwlwifi: mvm: fix netdetect starting/stopping for unified images With unified images, we need to make sure the net-detect scan is stopped after resuming, since we don't restart the FW. Also, we need to make sure we check if there are enough scan slots available to run it, as we do with other scans. Fixes: commit 23ae61282b88 ("iwlwifi: mvm: Do not switch to D3 image on suspend") Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 19 +++++++++++++++ drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 33 ++++++++++++++++++++++----- 2 files changed, 46 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c index 03a8fc586548..b88e2048ae0b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c @@ -1087,6 +1087,15 @@ iwl_mvm_netdetect_config(struct iwl_mvm *mvm, ret = iwl_mvm_switch_to_d3(mvm); if (ret) return ret; + } else { + /* In theory, we wouldn't have to stop a running sched + * scan in order to start another one (for + * net-detect). But in practice this doesn't seem to + * work properly, so stop any running sched_scan now. + */ + ret = iwl_mvm_scan_stop(mvm, IWL_MVM_SCAN_SCHED, true); + if (ret) + return ret; } /* rfkill release can be either for wowlan or netdetect */ @@ -2091,6 +2100,16 @@ static int __iwl_mvm_resume(struct iwl_mvm *mvm, bool test) iwl_mvm_update_changed_regdom(mvm); if (mvm->net_detect) { + /* If this is a non-unified image, we restart the FW, + * so no need to stop the netdetect scan. If that + * fails, continue and try to get the wake-up reasons, + * but trigger a HW restart by keeping a failure code + * in ret. + */ + if (unified_image) + ret = iwl_mvm_scan_stop(mvm, IWL_MVM_SCAN_NETDETECT, + false); + iwl_mvm_query_netdetect_reasons(mvm, vif); /* has unlocked the mutex, so skip that */ goto out; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c index f279fdd6eb44..fa9743205491 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c @@ -1199,6 +1199,9 @@ static int iwl_mvm_num_scans(struct iwl_mvm *mvm) static int iwl_mvm_check_running_scans(struct iwl_mvm *mvm, int type) { + bool unified_image = fw_has_capa(&mvm->fw->ucode_capa, + IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG); + /* This looks a bit arbitrary, but the idea is that if we run * out of possible simultaneous scans and the userspace is * trying to run a scan type that is already running, we @@ -1225,12 +1228,30 @@ static int iwl_mvm_check_running_scans(struct iwl_mvm *mvm, int type) return -EBUSY; return iwl_mvm_scan_stop(mvm, IWL_MVM_SCAN_REGULAR, true); case IWL_MVM_SCAN_NETDETECT: - /* No need to stop anything for net-detect since the - * firmware is restarted anyway. This way, any sched - * scans that were running will be restarted when we - * resume. - */ - return 0; + /* For non-unified images, there's no need to stop + * anything for net-detect since the firmware is + * restarted anyway. This way, any sched scans that + * were running will be restarted when we resume. + */ + if (!unified_image) + return 0; + + /* If this is a unified image and we ran out of scans, + * we need to stop something. Prefer stopping regular + * scans, because the results are useless at this + * point, and we should be able to keep running + * another scheduled scan while suspended. + */ + if (mvm->scan_status & IWL_MVM_SCAN_REGULAR_MASK) + return iwl_mvm_scan_stop(mvm, IWL_MVM_SCAN_REGULAR, + true); + if (mvm->scan_status & IWL_MVM_SCAN_SCHED_MASK) + return iwl_mvm_scan_stop(mvm, IWL_MVM_SCAN_SCHED, + true); + + /* fall through, something is wrong if no scan was + * running but we ran out of scans. + */ default: WARN_ON(1); break; -- cgit From 04946fb60fb157faafa01658dff3131d49f49ccb Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 18 Oct 2016 10:24:49 +0100 Subject: ARM: fix oops when using older ARMv4T CPUs Alexander Shiyan reports that CLPS711x fails at boot time in the data exception handler due to a NULL pointer dereference. This is caused by the late-v4t abort handler overwriting R9 (which becomes zero). Fix this by making the abort handler save and restore R9. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c3b58000 [00000008] *pgd=800000000, *pte=00000000, *ppte=feff4140 Internal error: Oops: 63c11817 [#1] PREEMPT ARM CPU: 0 PID: 448 Comm: ash Not tainted 4.8.1+ #1 Hardware name: Cirrus Logic CLPS711X (Device Tree Support) task: c39e03a0 ti: c3b4e000 task.ti: c3b4e000 PC is at __dabt_svc+0x4c/0x60 LR is at do_page_fault+0x144/0x2ac pc : [] lr : [] psr: 60000093 sp : c3b4fe6c ip : 00000001 fp : b6f1bf88 r10: c387a5a0 r9 : 00000000 r8 : e4e0e001 r7 : bee3ef83 r6 : 00100000 r5 : 80000013 r4 : c022fcf8 r3 : 00000000 r2 : 00000008 r1 : bf000000 r0 : 00000000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 0000217f Table: c3b58055 DAC: 00000055 Process ash (pid: 448, stack limit = 0xc3b4e190) Stack: (0xc3b4fe6c to 0xc3b50000) fe60: bee3ef83 c05168d1 ffffffff 00000000 c3adfe80 fe80: c3a03300 00000000 c3b4fed0 c3a03400 bee3ef83 c387a5a0 b6f1bf88 00000001 fea0: c3b4febc 00000076 c022fcf8 80000013 ffffffff 0000003f bf000000 bee3ef83 fec0: 00000004 00000000 c3adfe80 c00e432c 00000812 00000005 00000001 00000006 fee0: b6f1b000 00000000 00010000 0003c944 0004d000 0004d439 00010000 b6f1b000 ff00: 00000005 00000000 00015ecc c3b4fed0 0000000a 00000000 00000000 c00a1dc0 ff20: befff000 c3a03300 c3b4e000 c0507cd8 c0508024 fffffff8 c3a03300 00000000 ff40: c0516a58 c00a35bc c39e03a0 000001c0 bea84ce8 0004e008 c3b3a000 c00a3ac0 ff60: c3b40374 c3b3a000 bea84d11 00000000 c0500188 bea84d11 bea84ce8 00000001 ff80: 0000000b c000a304 c3b4e000 00000000 bea84ce4 c00a3cd0 00000000 bea84d11 ffa0: bea84ce8 c000a160 bea84d11 bea84ce8 bea84d11 bea84ce8 0004e008 0004d450 ffc0: bea84d11 bea84ce8 00000001 0000000b b6f45ee4 00000000 b6f5ff70 bea84ce4 ffe0: b6f2f130 bea84cb0 b6f2f194 b6ef29f4 a0000010 bea84d11 02c7cffa 02c7cffd [] (__dabt_svc) from [] (__copy_to_user_std+0xf8/0x330) [] (__copy_to_user_std) from [] +(load_elf_binary+0x920/0x107c) [] (load_elf_binary) from [] +(search_binary_handler+0x80/0x16c) [] (search_binary_handler) from [] +(do_execveat_common+0x418/0x600) [] (do_execveat_common) from [] (do_execve+0x28/0x30) [] (do_execve) from [] (ret_fast_syscall+0x0/0x30) Code: e1a0200d eb00136b e321f093 e59d104c (e5891008) ---[ end trace 4b4f8086ebef98c5 ]--- Fixes: e6978e4bf181 ("ARM: save and reset the address limit when entering an exception") Reported-by: Alexander Shiyan Tested-by: Alexander Shiyan Signed-off-by: Russell King --- arch/arm/mm/abort-lv4t.S | 34 ++++++++++++++++++++++++---------- 1 file changed, 24 insertions(+), 10 deletions(-) diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S index 6d8e8e3365d1..4cdfab31a0b6 100644 --- a/arch/arm/mm/abort-lv4t.S +++ b/arch/arm/mm/abort-lv4t.S @@ -7,7 +7,7 @@ * : r4 = aborted context pc * : r5 = aborted context psr * - * Returns : r4-r5, r10-r11, r13 preserved + * Returns : r4-r5, r9-r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -48,7 +48,10 @@ ENTRY(v4t_late_abort) /* c */ b do_DataAbort @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m /* d */ b do_DataAbort @ ldc rd, [rn, #m] /* e */ b .data_unknown -/* f */ +/* f */ b .data_unknown + +.data_unknown_r9: + ldr r9, [sp], #4 .data_unknown: @ Part of jumptable mov r0, r4 mov r1, r8 @@ -57,6 +60,7 @@ ENTRY(v4t_late_abort) .data_arm_ldmstm: tst r8, #1 << 21 @ check writeback bit beq do_DataAbort @ no writeback -> no fixup + str r9, [sp, #-4]! mov r7, #0x11 orr r7, r7, #0x1100 and r6, r8, r7 @@ -75,12 +79,14 @@ ENTRY(v4t_late_abort) subne r7, r7, r6, lsl #2 @ Undo increment addeq r7, r7, r6, lsl #2 @ Undo decrement str r7, [r2, r9, lsr #14] @ Put register 'Rn' + ldr r9, [sp], #4 b do_DataAbort .data_arm_lateldrhpre: tst r8, #1 << 21 @ Check writeback bit beq do_DataAbort @ No writeback -> no fixup .data_arm_lateldrhpost: + str r9, [sp, #-4]! and r9, r8, #0x00f @ get Rm / low nibble of immediate value tst r8, #1 << 22 @ if (immediate offset) andne r6, r8, #0xf00 @ { immediate high nibble @@ -93,6 +99,7 @@ ENTRY(v4t_late_abort) subne r7, r7, r6 @ Undo incrmenet addeq r7, r7, r6 @ Undo decrement str r7, [r2, r9, lsr #14] @ Put register 'Rn' + ldr r9, [sp], #4 b do_DataAbort .data_arm_lateldrpreconst: @@ -101,12 +108,14 @@ ENTRY(v4t_late_abort) .data_arm_lateldrpostconst: movs r6, r8, lsl #20 @ Get offset beq do_DataAbort @ zero -> no fixup + str r9, [sp, #-4]! and r9, r8, #15 << 16 @ Extract 'n' from instruction ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6, lsr #20 @ Undo increment addeq r7, r7, r6, lsr #20 @ Undo decrement str r7, [r2, r9, lsr #14] @ Put register 'Rn' + ldr r9, [sp], #4 b do_DataAbort .data_arm_lateldrprereg: @@ -115,6 +124,7 @@ ENTRY(v4t_late_abort) .data_arm_lateldrpostreg: and r7, r8, #15 @ Extract 'm' from instruction ldr r6, [r2, r7, lsl #2] @ Get register 'Rm' + str r9, [sp, #-4]! mov r9, r8, lsr #7 @ get shift count ands r9, r9, #31 and r7, r8, #0x70 @ get shift type @@ -126,33 +136,33 @@ ENTRY(v4t_late_abort) b .data_arm_apply_r6_and_rn b .data_arm_apply_r6_and_rn @ 1: LSL #0 nop - b .data_unknown @ 2: MUL? + b .data_unknown_r9 @ 2: MUL? nop - b .data_unknown @ 3: MUL? + b .data_unknown_r9 @ 3: MUL? nop mov r6, r6, lsr r9 @ 4: LSR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, lsr #32 @ 5: LSR #32 b .data_arm_apply_r6_and_rn - b .data_unknown @ 6: MUL? + b .data_unknown_r9 @ 6: MUL? nop - b .data_unknown @ 7: MUL? + b .data_unknown_r9 @ 7: MUL? nop mov r6, r6, asr r9 @ 8: ASR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, asr #32 @ 9: ASR #32 b .data_arm_apply_r6_and_rn - b .data_unknown @ A: MUL? + b .data_unknown_r9 @ A: MUL? nop - b .data_unknown @ B: MUL? + b .data_unknown_r9 @ B: MUL? nop mov r6, r6, ror r9 @ C: ROR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, rrx @ D: RRX b .data_arm_apply_r6_and_rn - b .data_unknown @ E: MUL? + b .data_unknown_r9 @ E: MUL? nop - b .data_unknown @ F: MUL? + b .data_unknown_r9 @ F: MUL? .data_thumb_abort: ldrh r8, [r4] @ read instruction @@ -190,6 +200,7 @@ ENTRY(v4t_late_abort) .data_thumb_pushpop: tst r8, #1 << 10 beq .data_unknown + str r9, [sp, #-4]! and r6, r8, #0x55 @ hweight8(r8) + R bit and r9, r8, #0xaa add r6, r6, r9, lsr #1 @@ -204,9 +215,11 @@ ENTRY(v4t_late_abort) addeq r7, r7, r6, lsl #2 @ increment SP if PUSH subne r7, r7, r6, lsl #2 @ decrement SP if POP str r7, [r2, #13 << 2] + ldr r9, [sp], #4 b do_DataAbort .data_thumb_ldmstm: + str r9, [sp, #-4]! and r6, r8, #0x55 @ hweight8(r8) and r9, r8, #0xaa add r6, r6, r9, lsr #1 @@ -219,4 +232,5 @@ ENTRY(v4t_late_abort) and r6, r6, #15 @ number of regs to transfer sub r7, r7, r6, lsl #2 @ always decrement str r7, [r2, r9, lsr #6] + ldr r9, [sp], #4 b do_DataAbort -- cgit From 6127d124ee4eb9c39983813cc9803f3654ab7e16 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 18 Oct 2016 21:46:18 +0100 Subject: ARM: wire up new pkey syscalls Wire up the new pkey syscalls for ARM. Signed-off-by: Russell King --- arch/arm/include/asm/unistd.h | 2 +- arch/arm/include/uapi/asm/unistd.h | 3 +++ arch/arm/kernel/calls.S | 3 +++ 3 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 194b69923389..ada0d29a660f 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -19,7 +19,7 @@ * This may need to be greater than __NR_last_syscall+1 in order to * account for the padding in the syscall table */ -#define __NR_syscalls (396) +#define __NR_syscalls (400) #define __ARCH_WANT_STAT64 #define __ARCH_WANT_SYS_GETHOSTNAME diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index 2cb9dc770e1d..314100a06ccb 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -420,6 +420,9 @@ #define __NR_copy_file_range (__NR_SYSCALL_BASE+391) #define __NR_preadv2 (__NR_SYSCALL_BASE+392) #define __NR_pwritev2 (__NR_SYSCALL_BASE+393) +#define __NR_pkey_mprotect (__NR_SYSCALL_BASE+394) +#define __NR_pkey_alloc (__NR_SYSCALL_BASE+395) +#define __NR_pkey_free (__NR_SYSCALL_BASE+396) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 703fa0f3cd8f..08030b18f10a 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -403,6 +403,9 @@ CALL(sys_copy_file_range) CALL(sys_preadv2) CALL(sys_pwritev2) + CALL(sys_pkey_mprotect) +/* 395 */ CALL(sys_pkey_alloc) + CALL(sys_pkey_free) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted -- cgit From da25311c7ca8b0254a686fc0d597075b9aa3b683 Mon Sep 17 00:00:00 2001 From: Patrick Scheuring Date: Wed, 19 Oct 2016 12:04:02 -0700 Subject: Input: i8042 - add XMG C504 to keyboard reset table The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop. Therefore it also needs a keyboard reset to detect the Elantech touchpad. Otherwise the touchpad appears to be dead. With this patch the touchpad is detected: $ dmesg | grep -E "(i8042|Elantech|elantech)" [ 2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.680372] i8042: Attempting to reset device connected to KBD port [ 2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e) [ 3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f. [ 3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74 [ 3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 Signed-off-by: Patrick Scheuring Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index f4bfb4b2d50a..073246c7d163 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -877,6 +877,13 @@ static const struct dmi_system_id __initconst i8042_dmi_kbdreset_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "P34"), }, }, + { + /* Schenker XMG C504 - Elantech touchpad */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "XMG"), + DMI_MATCH(DMI_PRODUCT_NAME, "C504"), + }, + }, { } }; -- cgit From 446647d4b9b90335f29a06ec21a05b508e269866 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 19 Oct 2016 13:27:40 +0300 Subject: ideapad-laptop: Add another DMI entry for Yoga 900 This particular laptop has its motherboard replaced and after that, even with the latest BIOS, some DMI identification strings have become "INVALID". This includes DMI_PRODUCT_VERSION which results Wifi being blocked. It seems that DMI_BOARD_NAME is still valid so use that as an alternative for Lenovo Yoga 900. Signed-off-by: Mika Westerberg Signed-off-by: Darren Hart --- drivers/platform/x86/ideapad-laptop.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index a2323941e677..a7614fc542b5 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -933,6 +933,13 @@ static const struct dmi_system_id no_hw_rfkill_list[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 900"), }, }, + { + .ident = "Lenovo Yoga 900", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BOARD_NAME, "VIUU4"), + }, + }, { .ident = "Lenovo YOGA 910-13IKB", .matches = { -- cgit From 1c80e9603fe8341ed5bea696747d07083d5e0476 Mon Sep 17 00:00:00 2001 From: Azael Avalos Date: Thu, 25 Aug 2016 12:50:55 -0600 Subject: toshiba-wmi: Fix loading the driver on non Toshiba laptops Bug 150611 uncovered that the WMI ID used by the toshiba-wmi driver is not Toshiba specific, and as such, the driver was being loaded on non Toshiba laptops too. This patch adds a DMI matching list checking for TOSHIBA as the vendor, refusing to load if it is not. Also the WMI GUID was renamed, dropping the TOSHIBA_ prefix, to better reflect that such GUID is not a Toshiba specific one. Cc: # 4.4+ Signed-off-by: Azael Avalos Signed-off-by: Darren Hart --- drivers/platform/x86/toshiba-wmi.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/drivers/platform/x86/toshiba-wmi.c b/drivers/platform/x86/toshiba-wmi.c index feac4576b837..2df07ee8f3c3 100644 --- a/drivers/platform/x86/toshiba-wmi.c +++ b/drivers/platform/x86/toshiba-wmi.c @@ -24,14 +24,15 @@ #include #include #include +#include MODULE_AUTHOR("Azael Avalos"); MODULE_DESCRIPTION("Toshiba WMI Hotkey Driver"); MODULE_LICENSE("GPL"); -#define TOSHIBA_WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100" +#define WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100" -MODULE_ALIAS("wmi:"TOSHIBA_WMI_EVENT_GUID); +MODULE_ALIAS("wmi:"WMI_EVENT_GUID); static struct input_dev *toshiba_wmi_input_dev; @@ -63,6 +64,16 @@ static void toshiba_wmi_notify(u32 value, void *context) kfree(response.pointer); } +static struct dmi_system_id toshiba_wmi_dmi_table[] __initdata = { + { + .ident = "Toshiba laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + }, + }, + {} +}; + static int __init toshiba_wmi_input_setup(void) { acpi_status status; @@ -81,7 +92,7 @@ static int __init toshiba_wmi_input_setup(void) if (err) goto err_free_dev; - status = wmi_install_notify_handler(TOSHIBA_WMI_EVENT_GUID, + status = wmi_install_notify_handler(WMI_EVENT_GUID, toshiba_wmi_notify, NULL); if (ACPI_FAILURE(status)) { err = -EIO; @@ -95,7 +106,7 @@ static int __init toshiba_wmi_input_setup(void) return 0; err_remove_notifier: - wmi_remove_notify_handler(TOSHIBA_WMI_EVENT_GUID); + wmi_remove_notify_handler(WMI_EVENT_GUID); err_free_keymap: sparse_keymap_free(toshiba_wmi_input_dev); err_free_dev: @@ -105,7 +116,7 @@ static int __init toshiba_wmi_input_setup(void) static void toshiba_wmi_input_destroy(void) { - wmi_remove_notify_handler(TOSHIBA_WMI_EVENT_GUID); + wmi_remove_notify_handler(WMI_EVENT_GUID); sparse_keymap_free(toshiba_wmi_input_dev); input_unregister_device(toshiba_wmi_input_dev); } @@ -114,7 +125,8 @@ static int __init toshiba_wmi_init(void) { int ret; - if (!wmi_has_guid(TOSHIBA_WMI_EVENT_GUID)) + if (!wmi_has_guid(WMI_EVENT_GUID) || + !dmi_check_system(toshiba_wmi_dmi_table)) return -ENODEV; ret = toshiba_wmi_input_setup(); @@ -130,7 +142,7 @@ static int __init toshiba_wmi_init(void) static void __exit toshiba_wmi_exit(void) { - if (wmi_has_guid(TOSHIBA_WMI_EVENT_GUID)) + if (wmi_has_guid(WMI_EVENT_GUID)) toshiba_wmi_input_destroy(); } -- cgit From 5fb57ab328aaf313c5ad9c4c48900f632e7c6f1c Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 18 Oct 2016 12:30:36 +0200 Subject: drm/imx: ipuv3-plane: make sure x/y offsets are even in case of chroma subsampling Odd x/y offsets are not allowed for horizontally/vertically chroma subsampled planar YUV formats. Signed-off-by: Philipp Zabel Acked-by: Liu Ying --- drivers/gpu/drm/imx/ipuv3-plane.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index 5c342997863e..e1ad844abafb 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -259,6 +259,7 @@ static int ipu_plane_atomic_check(struct drm_plane *plane, struct drm_framebuffer *fb = state->fb; struct drm_framebuffer *old_fb = old_state->fb; unsigned long eba, ubo, vbo, old_ubo, old_vbo; + int hsub, vsub; /* Ok to disable */ if (!fb) @@ -372,6 +373,16 @@ static int ipu_plane_atomic_check(struct drm_plane *plane, if (old_fb && old_fb->pitches[1] != fb->pitches[1]) crtc_state->mode_changed = true; + + /* + * The x/y offsets must be even in case of horizontal/vertical + * chroma subsampling. + */ + hsub = drm_format_horz_chroma_subsampling(fb->pixel_format); + vsub = drm_format_vert_chroma_subsampling(fb->pixel_format); + if (((state->src_x >> 16) & (hsub - 1)) || + ((state->src_y >> 16) & (vsub - 1))) + return -EINVAL; } return 0; -- cgit From 86126748cd5063aa888ce252f16b89b35e7d4707 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 18 Oct 2016 17:09:30 +0200 Subject: drm/imx: ipuv3-plane: disable local alpha for planes without alpha channel Without this patch, after enabling the overlay plane with an RGBA framebuffer, switching to a framebuffer without alpha channel would cause the plane to vanish, since the pixel local alpha is constant zero in that case. Disable local alpha again when setting an opaque framebuffer. Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-plane.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index e1ad844abafb..d5864ed4d772 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -437,6 +437,7 @@ static void ipu_plane_atomic_update(struct drm_plane *plane, ipu_dp_set_global_alpha(ipu_plane->dp, false, 0, false); break; default: + ipu_dp_set_global_alpha(ipu_plane->dp, true, 0, true); break; } } -- cgit From 368e21aebe9535c1643b272aaa9819298a6bc3e5 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 19 Oct 2016 21:02:04 +0300 Subject: rtc: cmos: Don't enable interrupts in the middle of the interrupt handler MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Using spin_lock_irq()/spin_unlock_irq() from within the interrupt handler is a no-no. Let's save/restore the flags to avoid turning on interrupts prematurely. We hit this in a bunch of our CI systems, but for whatever reason I wasn't able to reproduce on my own machine, so this fix is just based on the backtrace. [ 202.634918] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:2729 trace_hardirqs_on_caller+0x113/0x1b0 [ 202.634919] DEBUG_LOCKS_WARN_ON(current->hardirq_context) [ 202.634929] Modules linked in: snd_hda_intel i915 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel lpc_ich snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_codec snd_hwdep i2c_designware_platform i2c_designware_core snd_hda_core mei_me mei snd_pcm r8169 mii sdhci_acpi sdhci mmc_core i2c_hid [last unloaded: i915] [ 202.634930] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G U 4.9.0-rc1-CI-CI_DRM_1734+ #1 [ 202.634931] Hardware name: GIGABYTE M4HM87P-00/M4HM87P-00, BIOS F6 12/10/2014 [ 202.634933] ffff88011ea03d68 ffffffff8142dce5 ffff88011ea03db8 0000000000000000 [ 202.634934] ffff88011ea03da8 ffffffff8107e496 00000aa900000002 ffffffff81e249a0 [ 202.634935] ffffffff81815637 ffffffff82e7c280 0000000000000000 0000000000000004 [ 202.634936] Call Trace: [ 202.634939] [ 202.634939] [] dump_stack+0x67/0x92 [ 202.634941] [] __warn+0xc6/0xe0 [ 202.634944] [] ? _raw_spin_unlock_irq+0x27/0x50 [ 202.634945] [] warn_slowpath_fmt+0x4a/0x50 [ 202.634946] [] trace_hardirqs_on_caller+0x113/0x1b0 [ 202.634948] [] trace_hardirqs_on+0xd/0x10 [ 202.634949] [] _raw_spin_unlock_irq+0x27/0x50 [ 202.634951] [] rtc_handler+0x32/0xa0 [ 202.634954] [] acpi_ev_fixed_event_detect+0xd4/0xfb [ 202.634956] [] acpi_ev_sci_xrupt_handler+0xf/0x2d [ 202.634957] [] acpi_irq+0x11/0x2c [ 202.634960] [] __handle_irq_event_percpu+0x58/0x370 [ 202.634961] [] handle_irq_event_percpu+0x1e/0x50 [ 202.634962] [] handle_irq_event+0x34/0x60 [ 202.634963] [] handle_fasteoi_irq+0xa6/0x170 [ 202.634966] [] handle_irq+0x15/0x20 [ 202.634967] [] do_IRQ+0x68/0x130 [ 202.634968] [] common_interrupt+0x89/0x89 [ 202.634970] [ 202.634970] [] ? mwait_idle+0x93/0x210 [ 202.634971] [] ? mwait_idle+0x8a/0x210 [ 202.634972] [] arch_cpu_idle+0xa/0x10 [ 202.634973] [] default_idle_call+0x1e/0x30 [ 202.634974] [] cpu_startup_entry+0x17c/0x1f0 [ 202.634976] [] rest_init+0x127/0x130 [ 202.634978] [] start_kernel+0x3f6/0x403 [ 202.634980] [] x86_64_start_reservations+0x2a/0x2c [ 202.634981] [] x86_64_start_kernel+0x173/0x186 [ 202.634982] ---[ end trace 293c99618fa08d34 ]--- Cc: Gabriele Mazzotta Cc: Alexandre Belloni Fixes: 983bf1256edb ("rtc: cmos: Clear ACPI-driven alarms upon resume") Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-cmos.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 6f0e12e66296..7030d7cd3861 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -996,8 +996,9 @@ static u32 rtc_handler(void *context) struct cmos_rtc *cmos = dev_get_drvdata(dev); unsigned char rtc_control = 0; unsigned char rtc_intr; + unsigned long flags; - spin_lock_irq(&rtc_lock); + spin_lock_irqsave(&rtc_lock, flags); if (cmos_rtc.suspend_ctrl) rtc_control = CMOS_READ(RTC_CONTROL); if (rtc_control & RTC_AIE) { @@ -1006,7 +1007,7 @@ static u32 rtc_handler(void *context) rtc_intr = CMOS_READ(RTC_INTR_FLAGS); rtc_update_irq(cmos->rtc, 1, rtc_intr); } - spin_unlock_irq(&rtc_lock); + spin_unlock_irqrestore(&rtc_lock, flags); pm_wakeup_event(dev, 0); acpi_clear_event(ACPI_EVENT_RTC); -- cgit From 77f7f71f5be1087823296f2dd8114ff7246ae877 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 14 Oct 2016 11:11:06 -0400 Subject: drm/amdgpu/powerplay/smu7: fix static checker warning Casting of voltage values to a larger size results in overwriting adjacent memory in the structure. Reviewed-by: Rex Zhu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 609996c84ad5..13333d01d2ef 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -2127,15 +2127,18 @@ static int smu7_patch_acp_vddc(struct pp_hwmgr *hwmgr, } static int smu7_patch_limits_vddc(struct pp_hwmgr *hwmgr, - struct phm_clock_and_voltage_limits *tab) + struct phm_clock_and_voltage_limits *tab) { + uint32_t vddc, vddci; struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend); if (tab) { - smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, (uint32_t *)&tab->vddc, - &data->vddc_leakage); - smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, (uint32_t *)&tab->vddci, - &data->vddci_leakage); + smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddc, + &data->vddc_leakage); + tab->vddc = vddc; + smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddci, + &data->vddci_leakage); + tab->vddci = vddci; } return 0; -- cgit From fb9a5b0c1c9893db2e0d18544fd49e19d784a87d Mon Sep 17 00:00:00 2001 From: Tom St Denis Date: Thu, 13 Oct 2016 12:38:07 -0400 Subject: drm/radeon/si_dpm: Limit clocks on HD86xx part Limit clocks on a specific HD86xx part to avoid crashes (while awaiting an appropriate PP fix). Signed-off-by: Tom St Denis Reviewed-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/si_dpm.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index 89bdf20344ae..e22b11189628 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -3021,6 +3021,12 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev, max_sclk = 75000; max_mclk = 80000; } + /* limit clocks on HD8600 series */ + if (rdev->pdev->device == 0x6660 && + rdev->pdev->revision == 0x83) { + max_sclk = 75000; + max_mclk = 80000; + } if (rps->vce_active) { rps->evclk = rdev->pm.dpm.vce_states[rdev->pm.dpm.vce_level].evclk; -- cgit From 08e23a02e3e2dd6dde0f2f5bb90d03f5bc2a5804 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 6 Oct 2016 11:25:25 -0400 Subject: drm/amdgpu: drop atom scratch save/restore in gpu reset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is already handled by the dce IP modules in their suspend and resume code. No need to do it again. Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index b4f4a9239069..2b0267494bca 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2268,8 +2268,6 @@ int amdgpu_gpu_reset(struct amdgpu_device *adev) } if (need_full_reset) { - /* save scratch */ - amdgpu_atombios_scratch_regs_save(adev); r = amdgpu_suspend(adev); retry: @@ -2288,8 +2286,6 @@ retry: dev_info(adev->dev, "GPU reset succeeded, trying to resume\n"); r = amdgpu_resume(adev); } - /* restore scratch */ - amdgpu_atombios_scratch_regs_restore(adev); } if (!r) { amdgpu_irq_gpu_reset_resume_helper(adev); -- cgit From e695e77c6b49c49e5eafdc6239d6b22bfa30c7cc Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 19 Oct 2016 14:40:58 -0400 Subject: drm/amdgpu: move atom scratch register save/restore to common code We need this for more than just DCE. Move it out of the DCE modules and into the device code. This way we can be sure the scratch registers are initialized properly before we run asic_init which happens before DCE IPs are restored. Fixes atombios hangs in asic_init. Reviewed-by: JimQu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 5 ++++- drivers/gpu/drm/amd/amdgpu/dce_v10_0.c | 6 ------ drivers/gpu/drm/amd/amdgpu/dce_v11_0.c | 6 ------ drivers/gpu/drm/amd/amdgpu/dce_v6_0.c | 6 ------ drivers/gpu/drm/amd/amdgpu/dce_v8_0.c | 6 ------ 5 files changed, 4 insertions(+), 25 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 2b0267494bca..7ca07e7b25c1 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -1959,6 +1959,7 @@ int amdgpu_device_suspend(struct drm_device *dev, bool suspend, bool fbcon) /* evict remaining vram memory */ amdgpu_bo_evict_vram(adev); + amdgpu_atombios_scratch_regs_save(adev); pci_save_state(dev->pdev); if (suspend) { /* Shut down the device */ @@ -2010,6 +2011,7 @@ int amdgpu_device_resume(struct drm_device *dev, bool resume, bool fbcon) return r; } } + amdgpu_atombios_scratch_regs_restore(adev); /* post card */ if (!amdgpu_card_posted(adev) || !resume) { @@ -2277,8 +2279,9 @@ retry: amdgpu_display_stop_mc_access(adev, &save); amdgpu_wait_for_idle(adev, AMD_IP_BLOCK_TYPE_GMC); } - + amdgpu_atombios_scratch_regs_save(adev); r = amdgpu_asic_reset(adev); + amdgpu_atombios_scratch_regs_restore(adev); /* post card */ amdgpu_atom_asic_init(adev->mode_info.atom_context); diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c index 4108c686aa7c..9260caef74fa 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c @@ -3151,10 +3151,6 @@ static int dce_v10_0_hw_fini(void *handle) static int dce_v10_0_suspend(void *handle) { - struct amdgpu_device *adev = (struct amdgpu_device *)handle; - - amdgpu_atombios_scratch_regs_save(adev); - return dce_v10_0_hw_fini(handle); } @@ -3165,8 +3161,6 @@ static int dce_v10_0_resume(void *handle) ret = dce_v10_0_hw_init(handle); - amdgpu_atombios_scratch_regs_restore(adev); - /* turn on the BL */ if (adev->mode_info.bl_encoder) { u8 bl_level = amdgpu_display_backlight_get_level(adev, diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c index f264b8f17ad1..367739bd1927 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c @@ -3215,10 +3215,6 @@ static int dce_v11_0_hw_fini(void *handle) static int dce_v11_0_suspend(void *handle) { - struct amdgpu_device *adev = (struct amdgpu_device *)handle; - - amdgpu_atombios_scratch_regs_save(adev); - return dce_v11_0_hw_fini(handle); } @@ -3229,8 +3225,6 @@ static int dce_v11_0_resume(void *handle) ret = dce_v11_0_hw_init(handle); - amdgpu_atombios_scratch_regs_restore(adev); - /* turn on the BL */ if (adev->mode_info.bl_encoder) { u8 bl_level = amdgpu_display_backlight_get_level(adev, diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c index b948d6cb1399..15f9fc0514b2 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c @@ -2482,10 +2482,6 @@ static int dce_v6_0_hw_fini(void *handle) static int dce_v6_0_suspend(void *handle) { - struct amdgpu_device *adev = (struct amdgpu_device *)handle; - - amdgpu_atombios_scratch_regs_save(adev); - return dce_v6_0_hw_fini(handle); } @@ -2496,8 +2492,6 @@ static int dce_v6_0_resume(void *handle) ret = dce_v6_0_hw_init(handle); - amdgpu_atombios_scratch_regs_restore(adev); - /* turn on the BL */ if (adev->mode_info.bl_encoder) { u8 bl_level = amdgpu_display_backlight_get_level(adev, diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c index 5966166ec94c..8c4d808db0f1 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c @@ -3033,10 +3033,6 @@ static int dce_v8_0_hw_fini(void *handle) static int dce_v8_0_suspend(void *handle) { - struct amdgpu_device *adev = (struct amdgpu_device *)handle; - - amdgpu_atombios_scratch_regs_save(adev); - return dce_v8_0_hw_fini(handle); } @@ -3047,8 +3043,6 @@ static int dce_v8_0_resume(void *handle) ret = dce_v8_0_hw_init(handle); - amdgpu_atombios_scratch_regs_restore(adev); - /* turn on the BL */ if (adev->mode_info.bl_encoder) { u8 bl_level = amdgpu_display_backlight_get_level(adev, -- cgit From 1304f0c7ddd80b359282bb2077c8a7bc51f06c3a Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Mon, 17 Oct 2016 09:49:29 +0800 Subject: drm/amd/amdgpu: expose max engine and memory clock for powerplay enabled case Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index c2c7fb140338..203d98b00555 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -459,10 +459,8 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file /* return all clocks in KHz */ dev_info.gpu_counter_freq = amdgpu_asic_get_xclk(adev) * 10; if (adev->pm.dpm_enabled) { - dev_info.max_engine_clock = - adev->pm.dpm.dyn_state.max_clock_voltage_on_ac.sclk * 10; - dev_info.max_memory_clock = - adev->pm.dpm.dyn_state.max_clock_voltage_on_ac.mclk * 10; + dev_info.max_engine_clock = amdgpu_dpm_get_sclk(adev, false) * 10; + dev_info.max_memory_clock = amdgpu_dpm_get_mclk(adev, false) * 10; } else { dev_info.max_engine_clock = adev->pm.default_sclk * 10; dev_info.max_memory_clock = adev->pm.default_mclk * 10; -- cgit From 0711257ee6d1e8bec08fdf26021f968d4d041e91 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 18 Oct 2016 00:32:00 -0400 Subject: drm/amdgpu/st: move ATC CG golden init from gfx to mc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's technically an MC register so make sure we initialize it in the MC module rather than the gfx module. Since other bits in the same register are used to enable ATC CG features make sure we apply the golden setting first. Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 1 - drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index ee6a48a09214..bb97182dc749 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -640,7 +640,6 @@ static const u32 stoney_mgcg_cgcg_init[] = mmCP_MEM_SLP_CNTL, 0xffffffff, 0x00020201, mmRLC_MEM_SLP_CNTL, 0xffffffff, 0x00020201, mmCGTS_SM_CTRL_REG, 0xffffffff, 0x96940200, - mmATC_MISC_CG, 0xffffffff, 0x000c0200, }; static void gfx_v8_0_set_ring_funcs(struct amdgpu_device *adev); diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c index c22ef140a542..a16b2201d52c 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c @@ -100,6 +100,7 @@ static const u32 cz_mgcg_cgcg_init[] = static const u32 stoney_mgcg_cgcg_init[] = { + mmATC_MISC_CG, 0xffffffff, 0x000c0200, mmMC_MEM_POWER_LS, 0xffffffff, 0x00000104 }; -- cgit From e6b2a7d294360ecf128891d8288603526ce4d6ad Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 19 Oct 2016 13:06:14 -0400 Subject: drm/amdgpu: explicitly set pg_flags for ST No need to retain previous settings as this is the first time we set pg_flags. Probably a copy/paste typo from the CZ code. Avoids confusion. No change in behavior as adev is kzallocated. Reviewed-by: Tom St Denis Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/vi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c index c0d9aad7126f..7c13090df7c0 100644 --- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -1651,7 +1651,7 @@ static int vi_common_early_init(void *handle) AMD_CG_SUPPORT_SDMA_MGCG | AMD_CG_SUPPORT_SDMA_LS | AMD_CG_SUPPORT_VCE_MGCG; - adev->pg_flags |= AMD_PG_SUPPORT_GFX_PG | + adev->pg_flags = AMD_PG_SUPPORT_GFX_PG | AMD_PG_SUPPORT_GFX_SMG | AMD_PG_SUPPORT_GFX_PIPELINE | AMD_PG_SUPPORT_UVD | -- cgit From 57d7f9b64ad9d4d9c87ed1d6b58e5bfabf2dfc6c Mon Sep 17 00:00:00 2001 From: jimqu Date: Thu, 20 Oct 2016 14:58:04 +0800 Subject: drm/amdgpu: avoid drm error log during S3 on RHEL7.3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: JimQu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index b0f6e6957536..82dc8d20e28a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -519,7 +519,8 @@ static int amdgpu_cs_parser_bos(struct amdgpu_cs_parser *p, r = ttm_eu_reserve_buffers(&p->ticket, &p->validated, true, &duplicates); if (unlikely(r != 0)) { - DRM_ERROR("ttm_eu_reserve_buffers failed.\n"); + if (r != -ERESTARTSYS) + DRM_ERROR("ttm_eu_reserve_buffers failed.\n"); goto error_free_pages; } -- cgit From 51585e03f5b26521d7840c06f4807ee62b23af3a Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 17 Oct 2016 18:15:26 +0800 Subject: drm/amd/powerplay: fix static checker warning in process_pptables_v1_0.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rex Zhu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c b/drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c index 7de701d8a450..4477c55a58e3 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c @@ -1201,12 +1201,15 @@ static uint32_t make_classification_flags(struct pp_hwmgr *hwmgr, static int ppt_get_num_of_vce_state_table_entries_v1_0(struct pp_hwmgr *hwmgr) { const ATOM_Tonga_POWERPLAYTABLE *pp_table = get_powerplay_table(hwmgr); - const ATOM_Tonga_VCE_State_Table *vce_state_table = - (ATOM_Tonga_VCE_State_Table *)(((unsigned long)pp_table) + le16_to_cpu(pp_table->usVCEStateTableOffset)); + const ATOM_Tonga_VCE_State_Table *vce_state_table; - if (vce_state_table == NULL) + + if (pp_table == NULL) return 0; + vce_state_table = (void *)pp_table + + le16_to_cpu(pp_table->usVCEStateTableOffset); + return vce_state_table->ucNumEntries; } -- cgit From 8861a8209782faffedb6d64572fa968ee9c1c375 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Thu, 20 Oct 2016 15:51:25 +0800 Subject: drm/amd/powerplay: don't give up if DPM is already running Currently the driver crashes if smu7_enable_dpm_tasks() returns early, which it does if DPM is already active. It seems to be better just to continue anyway, at least I haven't noticed any ill effects. It's also unclear at what state the hardware was left by the previous driver, so IMO it's better to always fully initialize. Way to reproduce: with GPU passthrough. forced power off the VM or forced reset the VM without shutting down the Os. Signed-off-by: Grazvydas Ignotas Reviewed-by: Edward O'Callaghan Reviewed-by: Rex Zhu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 13333d01d2ef..75854021f403 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -1168,8 +1168,8 @@ int smu7_enable_dpm_tasks(struct pp_hwmgr *hwmgr) tmp_result = (!smum_is_dpm_running(hwmgr)) ? 0 : -1; PP_ASSERT_WITH_CODE(tmp_result == 0, - "DPM is already running right now, no need to enable DPM!", - return 0); + "DPM is already running", + ); if (smu7_voltage_control(hwmgr)) { tmp_result = smu7_enable_voltage_control(hwmgr); -- cgit From b77428b12b55437b28deae738d9ce8b2e0663b55 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Mon, 24 Oct 2016 14:21:18 +1100 Subject: xfs: defer should abort intent items if the trans roll fails If the deferred ops transaction roll fails, we need to abort the intent items if we haven't already logged a done item for it, regardless of whether or not the deferred ops has had a transaction committed. Dave found this while running generic/388. Move the tracepoint to make it easier to track object lifetimes. Reported-by: Dave Chinner Signed-off-by: Darrick J. Wong Reviewed-by: Dave Chinner Signed-off-by: Dave Chinner --- fs/xfs/libxfs/xfs_defer.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/fs/xfs/libxfs/xfs_defer.c b/fs/xfs/libxfs/xfs_defer.c index 613c5cf19436..5c2929f94bd3 100644 --- a/fs/xfs/libxfs/xfs_defer.c +++ b/fs/xfs/libxfs/xfs_defer.c @@ -199,9 +199,9 @@ xfs_defer_intake_work( struct xfs_defer_pending *dfp; list_for_each_entry(dfp, &dop->dop_intake, dfp_list) { - trace_xfs_defer_intake_work(tp->t_mountp, dfp); dfp->dfp_intent = dfp->dfp_type->create_intent(tp, dfp->dfp_count); + trace_xfs_defer_intake_work(tp->t_mountp, dfp); list_sort(tp->t_mountp, &dfp->dfp_work, dfp->dfp_type->diff_items); list_for_each(li, &dfp->dfp_work) @@ -221,21 +221,14 @@ xfs_defer_trans_abort( struct xfs_defer_pending *dfp; trace_xfs_defer_trans_abort(tp->t_mountp, dop); - /* - * If the transaction was committed, drop the intent reference - * since we're bailing out of here. The other reference is - * dropped when the intent hits the AIL. If the transaction - * was not committed, the intent is freed by the intent item - * unlock handler on abort. - */ - if (!dop->dop_committed) - return; - /* Abort intent items. */ + /* Abort intent items that don't have a done item. */ list_for_each_entry(dfp, &dop->dop_pending, dfp_list) { trace_xfs_defer_pending_abort(tp->t_mountp, dfp); - if (!dfp->dfp_done) + if (dfp->dfp_intent && !dfp->dfp_done) { dfp->dfp_type->abort_intent(dfp->dfp_intent); + dfp->dfp_intent = NULL; + } } /* Shut down FS. */ -- cgit From 38d8ed65092ed22f52a95f397855cace0260e110 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sun, 23 Oct 2016 21:56:08 +0100 Subject: hwmon: (core) fix resource leak on devm_kcalloc failure If dev_kcalloc fails to allocate hw_dev->groups then the current exit path is a direct return, causing a leak of resources such as hwdev and ida is not removed. Fix this by exiting via the free_hwmon exit path that performs the necessary resource cleanup. Signed-off-by: Colin Ian King Signed-off-by: Guenter Roeck --- drivers/hwmon/hwmon.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index adae6848ffb2..a74c075a30ec 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -536,8 +536,10 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata, hwdev->groups = devm_kcalloc(dev, ngroups, sizeof(*groups), GFP_KERNEL); - if (!hwdev->groups) - return ERR_PTR(-ENOMEM); + if (!hwdev->groups) { + err = -ENOMEM; + goto free_hwmon; + } attrs = __hwmon_create_attrs(dev, drvdata, chip); if (IS_ERR(attrs)) { -- cgit From f515c3834a4adf8b33f0e7215d434410b1687164 Mon Sep 17 00:00:00 2001 From: Bard Liao Date: Mon, 24 Oct 2016 18:32:18 +0800 Subject: ASoC: rt298: fix jack type detect error rt298_jack_detect may be called before card is instantiated. And snd_soc_dapm_force_enable_pin will not work in that case. So, update bit manually by regmap_update_bits. Signed-off-by: Bard Liao Signed-off-by: Mark Brown --- sound/soc/codecs/rt298.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/codecs/rt298.c b/sound/soc/codecs/rt298.c index 55558643166f..2db8179047ae 100644 --- a/sound/soc/codecs/rt298.c +++ b/sound/soc/codecs/rt298.c @@ -249,6 +249,11 @@ static int rt298_jack_detect(struct rt298_priv *rt298, bool *hp, bool *mic) snd_soc_dapm_force_enable_pin(dapm, "LDO1"); snd_soc_dapm_sync(dapm); + regmap_update_bits(rt298->regmap, + RT298_POWER_CTRL1, 0x1001, 0); + regmap_update_bits(rt298->regmap, + RT298_POWER_CTRL2, 0x4, 0x4); + regmap_write(rt298->regmap, RT298_SET_MIC1, 0x24); msleep(50); -- cgit From 4690481060f3c6b557b01f18319c6382f0fd63ab Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 23 Oct 2016 11:41:09 +0000 Subject: ASoC: Intel: Atom: add terminate entry for dmi_system_id tables Make sure dmi_system_id tables are NULL terminated. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- sound/soc/intel/atom/sst/sst_acpi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index 4d3184971227..748a0f68fc6c 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -343,6 +343,7 @@ static const struct dmi_system_id cht_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"), }, }, + { } }; -- cgit From 86a6c211d676add579a75b7e172a72bb3e2c21f8 Mon Sep 17 00:00:00 2001 From: Benjamin Coddington Date: Wed, 15 Jun 2016 15:02:55 -0400 Subject: NFS: Trim extra slash in v4 nfs_path A NFSv4 mount of a subdirectory will show an extra slash (as in 'server://path') in proc's mountinfo which will not match the device name and path. This can cause problems for programs searching for the mount. Fix this by checking for a leading slash in the dentry path, if so trim away any trailing slashes in the device name. Signed-off-by: Benjamin Coddington Signed-off-by: Anna Schumaker --- fs/nfs/namespace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c index c8162c660c44..5551e8ef67fd 100644 --- a/fs/nfs/namespace.c +++ b/fs/nfs/namespace.c @@ -98,7 +98,7 @@ rename_retry: return end; } namelen = strlen(base); - if (flags & NFS_PATH_CANONICAL) { + if (*end == '/') { /* Strip off excess slashes in base string */ while (namelen > 0 && base[namelen - 1] == '/') namelen--; -- cgit From 0b34c261e235a5c74dcf78bd305845bd15fe2b42 Mon Sep 17 00:00:00 2001 From: Goldwyn Rodrigues Date: Fri, 30 Sep 2016 10:40:52 -0500 Subject: btrfs: qgroup: Prevent qgroup->reserved from going subzero While free'ing qgroup->reserved resources, we much check if the page has not been invalidated by a truncate operation by checking if the page is still dirty before reducing the qgroup resources. Resources in such a case are free'd when the entire extent is released by delayed_ref. This fixes a double accounting while releasing resources in case of truncating a file, reproduced by the following testcase. SCRATCH_DEV=/dev/vdb SCRATCH_MNT=/mnt mkfs.btrfs -f $SCRATCH_DEV mount -t btrfs $SCRATCH_DEV $SCRATCH_MNT cd $SCRATCH_MNT btrfs quota enable $SCRATCH_MNT btrfs subvolume create a btrfs qgroup limit 500m a $SCRATCH_MNT sync for c in {1..15}; do dd if=/dev/zero bs=1M count=40 of=$SCRATCH_MNT/a/file; done sleep 10 sync sleep 5 touch $SCRATCH_MNT/a/newfile echo "Removing file" rm $SCRATCH_MNT/a/file Fixes: b9d0b38928 ("btrfs: Add handler for invalidate page") Signed-off-by: Goldwyn Rodrigues Reviewed-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/inode.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 50ba4ca167e7..6677674d0505 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -8930,9 +8930,14 @@ again: * So even we call qgroup_free_data(), it won't decrease reserved * space. * 2) Not written to disk - * This means the reserved space should be freed here. + * This means the reserved space should be freed here. However, + * if a truncate invalidates the page (by clearing PageDirty) + * and the page is accounted for while allocating extent + * in btrfs_check_data_free_space() we let delayed_ref to + * free the entire extent. */ - btrfs_qgroup_free_data(inode, page_start, PAGE_SIZE); + if (PageDirty(page)) + btrfs_qgroup_free_data(inode, page_start, PAGE_SIZE); if (!inode_evicting) { clear_extent_bit(tree, page_start, page_end, EXTENT_LOCKED | EXTENT_DIRTY | -- cgit From 69ae5e4459e43e56f03d0987e865fbac2b05af2a Mon Sep 17 00:00:00 2001 From: Wang Xiaoguang Date: Thu, 13 Oct 2016 09:23:39 +0800 Subject: btrfs: make file clone aware of fatal signals Indeed this just make the behavior similar to xfs when process has fatal signals pending, and it'll make fstests/generic/298 happy. Signed-off-by: Wang Xiaoguang Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index af69129d7e0e..71634570943c 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3814,6 +3814,11 @@ process_slot: } btrfs_release_path(path); key.offset = next_key_min_offset; + + if (fatal_signal_pending(current)) { + ret = -EINTR; + goto out; + } } ret = 0; -- cgit From dd4b857aabbce57518f2d32d9805365d3ff34fc6 Mon Sep 17 00:00:00 2001 From: Wang Xiaoguang Date: Tue, 18 Oct 2016 15:56:13 +0800 Subject: btrfs: pass correct args to btrfs_async_run_delayed_refs() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In btrfs_truncate_inode_items()->btrfs_async_run_delayed_refs(), we swap the arg2 and arg3 wrongly, fix this. This bug just impacts asynchronous delayed refs handle when we truncate inodes. In delayed_ref_async_start(), there is such codes: trans = btrfs_join_transaction(async->root); if (trans->transid > async->transid) goto end; ret = btrfs_run_delayed_refs(trans, async->root, async->count); From this codes, we can see that this just influence whether can we handle delayed refs or the number of delayed refs to handle, this may impact performance, but will not result in missing delayed refs, all delayed refs will be handled in btrfs_commit_transaction(). Signed-off-by: Wang Xiaoguang Reviewed-by: Holger Hoffstätte Signed-off-by: David Sterba --- fs/btrfs/inode.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 6677674d0505..1f980efbb2e8 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4605,8 +4605,8 @@ delete: BUG_ON(ret); if (btrfs_should_throttle_delayed_refs(trans, root)) btrfs_async_run_delayed_refs(root, - trans->transid, - trans->delayed_ref_updates * 2, 0); + trans->delayed_ref_updates * 2, + trans->transid, 0); if (be_nice) { if (truncate_space_check(trans, root, extent_num_bytes)) { -- cgit From 9c894696f56f5d84fb5766af81bcda4a7cb9a842 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 12 Oct 2016 11:33:21 +0300 Subject: Btrfs: remove some no-op casts We cast 0 to a u8 but then because of type promotion, it's immediately cast to int back to int before we do a bitwise negate. The cast doesn't matter in this case, the code works as intended. It causes a static checker warning though so let's remove it. Signed-off-by: Dan Carpenter Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/extent_io.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 66a755150056..8ed05d95584a 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -5569,7 +5569,7 @@ void le_bitmap_set(u8 *map, unsigned int start, int len) *p |= mask_to_set; len -= bits_to_set; bits_to_set = BITS_PER_BYTE; - mask_to_set = ~(u8)0; + mask_to_set = ~0; p++; } if (len) { @@ -5589,7 +5589,7 @@ void le_bitmap_clear(u8 *map, unsigned int start, int len) *p &= ~mask_to_clear; len -= bits_to_clear; bits_to_clear = BITS_PER_BYTE; - mask_to_clear = ~(u8)0; + mask_to_clear = ~0; p++; } if (len) { @@ -5679,7 +5679,7 @@ void extent_buffer_bitmap_set(struct extent_buffer *eb, unsigned long start, kaddr[offset] |= mask_to_set; len -= bits_to_set; bits_to_set = BITS_PER_BYTE; - mask_to_set = ~(u8)0; + mask_to_set = ~0; if (++offset >= PAGE_SIZE && len > 0) { offset = 0; page = eb->pages[++i]; @@ -5721,7 +5721,7 @@ void extent_buffer_bitmap_clear(struct extent_buffer *eb, unsigned long start, kaddr[offset] &= ~mask_to_clear; len -= bits_to_clear; bits_to_clear = BITS_PER_BYTE; - mask_to_clear = ~(u8)0; + mask_to_clear = ~0; if (++offset >= PAGE_SIZE && len > 0) { offset = 0; page = eb->pages[++i]; -- cgit From 9d1032cc49a8a1065e79ee323de66bcb4fdbd535 Mon Sep 17 00:00:00 2001 From: Wang Xiaoguang Date: Mon, 20 Jun 2016 09:18:52 +0800 Subject: btrfs: fix WARNING in btrfs_select_ref_head() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This issue was found when testing in-band dedupe enospc behaviour, sometimes run_one_delayed_ref() may fail for enospc reason, then __btrfs_run_delayed_refs（）will return, but forget to add num_heads_read back, which will trigger "WARN_ON(delayed_refs->num_heads_ready == 0)" in btrfs_select_ref_head(). Signed-off-by: Wang Xiaoguang Signed-off-by: David Sterba --- fs/btrfs/extent-tree.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 210c94ac8818..4607af38c72e 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2647,7 +2647,10 @@ static noinline int __btrfs_run_delayed_refs(struct btrfs_trans_handle *trans, btrfs_free_delayed_extent_op(extent_op); if (ret) { + spin_lock(&delayed_refs->lock); locked_ref->processing = 0; + delayed_refs->num_heads_ready++; + spin_unlock(&delayed_refs->lock); btrfs_delayed_ref_unlock(locked_ref); btrfs_put_delayed_ref(ref); btrfs_debug(fs_info, "run_one_delayed_ref returned %d", -- cgit From 6d13f62d931ba638e54ba56f3a7dd3080ffb485a Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Thu, 20 Oct 2016 12:26:16 +0200 Subject: ASoC: Intel: Skylake: Always acquire runtime pm ref on unload skl_probe() releases a runtime pm ref unconditionally wheras skl_remove() acquires one only if the device is wakeup capable. Thus if the device is not wakeup capable, unloading and reloading the module will result in the refcount being decreased below 0. Fix it. Fixes: d8c2dab8381d ("ASoC: Intel: Add Skylake HDA audio driver") Signed-off-by: Lukas Wunner Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index e3e764167765..7b7a380b1245 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -785,8 +785,7 @@ static void skl_remove(struct pci_dev *pci) release_firmware(skl->tplg); - if (pci_dev_run_wake(pci)) - pm_runtime_get_noresume(&pci->dev); + pm_runtime_get_noresume(&pci->dev); /* codec removal, invoke bus_device_remove */ snd_hdac_ext_bus_device_remove(ebus); -- cgit From 5229f1f4a4585f503a0683575bf38d9a1d2c1982 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 18 Oct 2016 17:18:58 +0200 Subject: ASoC: PXA: Brownstone needs I2C I rand into a new build error with SND_MMP_SOC_BROWNSTONE: warning: (SND_MMP_SOC_BROWNSTONE && SND_SOC_SAMSUNG_SMDK_WM8994 && SND_SOC_SMDK_WM8994_PCM && SND_SOC_LITTLEMILL) selects MFD_WM8994 which has unmet direct dependencies (HAS_IOMEM && I2C) drivers/mfd/wm8994-core.c:688:1: error: data definition has no type or storage class [-Werror] drivers/mfd/wm8994-core.c:688:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] I don't see why this never showed up before, as the dependency seems to have been missing since the symbol was first introduced several years ago. This adds a dependency like the other drivers have. Signed-off-by: Arnd Bergmann Signed-off-by: Mark Brown --- sound/soc/pxa/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index f2bf8661dd21..823b5a236d8d 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -208,7 +208,7 @@ config SND_PXA2XX_SOC_IMOTE2 config SND_MMP_SOC_BROWNSTONE tristate "SoC Audio support for Marvell Brownstone" - depends on SND_MMP_SOC && MACH_BROWNSTONE + depends on SND_MMP_SOC && MACH_BROWNSTONE && I2C select SND_MMP_SOC_SSPA select MFD_WM8994 select SND_SOC_WM8994 -- cgit From e0af98a7e025a7263ae7e50264f6f79ed29642a7 Mon Sep 17 00:00:00 2001 From: Ralf Ramsauer Date: Mon, 17 Oct 2016 15:59:56 +0200 Subject: spi: mark device nodes only in case of successful instantiation Instantiated SPI device nodes are marked with OF_POPULATE. This was introduced in bd6c164. On unloading, loaded device nodes will of course be unmarked. The problem are nodes that fail during initialisation: If a node fails, it won't be unloaded and hence not be unmarked. If a SPI driver module is unloaded and reloaded, it will skip nodes that failed before. Skip device nodes that are already populated and mark them only in case of success. Note that the same issue exists for I2C. Fixes: bd6c164 ("spi: Mark instantiated device nodes with OF_POPULATE") Signed-off-by: Ralf Ramsauer Reviewed-by: Geert Uytterhoeven Acked-by: Pantelis Antoniou Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 5787b723b593..838783c3fed0 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1618,9 +1618,11 @@ static void of_register_spi_devices(struct spi_master *master) if (of_node_test_and_set_flag(nc, OF_POPULATED)) continue; spi = of_register_spi_device(master, nc); - if (IS_ERR(spi)) + if (IS_ERR(spi)) { dev_warn(&master->dev, "Failed to create SPI device for %s\n", nc->full_name); + of_node_clear_flag(nc, OF_POPULATED); + } } } #else @@ -3131,6 +3133,7 @@ static int of_spi_notify(struct notifier_block *nb, unsigned long action, if (IS_ERR(spi)) { pr_err("%s: failed to create for '%s'\n", __func__, rd->dn->full_name); + of_node_clear_flag(rd->dn, OF_POPULATED); return notifier_from_errno(PTR_ERR(spi)); } break; -- cgit From 68a564006a21ae59c7c51b4359e2e8efa42ae4af Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 18 Oct 2016 00:05:35 +0200 Subject: NFSv4.1: work around -Wmaybe-uninitialized warning A bugfix introduced a harmless gcc warning in nfs4_slot_seqid_in_use if we enable -Wmaybe-uninitialized again: fs/nfs/nfs4session.c:203:54: error: 'cur_seq' may be used uninitialized in this function [-Werror=maybe-uninitialized] gcc is not smart enough to conclude that the IS_ERR/PTR_ERR pair results in a nonzero return value here. Using PTR_ERR_OR_ZERO() instead makes this clear to the compiler. The warning originally did not appear in v4.8 as it was globally disabled, but the bugfix that introduced the warning got backported to stable kernels which again enable it, and this is now the only warning in the v4.7 builds. Fixes: e09c978aae5b ("NFSv4.1: Fix Oopsable condition in server callback races") Signed-off-by: Arnd Bergmann Cc: Trond Myklebust Signed-off-by: Anna Schumaker --- fs/nfs/nfs4session.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/nfs/nfs4session.c b/fs/nfs/nfs4session.c index b62973045a3e..150c5a1879bf 100644 --- a/fs/nfs/nfs4session.c +++ b/fs/nfs/nfs4session.c @@ -178,12 +178,14 @@ static int nfs4_slot_get_seqid(struct nfs4_slot_table *tbl, u32 slotid, __must_hold(&tbl->slot_tbl_lock) { struct nfs4_slot *slot; + int ret; slot = nfs4_lookup_slot(tbl, slotid); - if (IS_ERR(slot)) - return PTR_ERR(slot); - *seq_nr = slot->seq_nr; - return 0; + ret = PTR_ERR_OR_ZERO(slot); + if (!ret) + *seq_nr = slot->seq_nr; + + return ret; } /* -- cgit From d624716b6c67e60681180786564b92ddb521148a Mon Sep 17 00:00:00 2001 From: Atish Patra Date: Wed, 19 Oct 2016 18:33:29 -0600 Subject: sparc64: Setup a scheduling domain for highest level cache. Individual scheduler domain should consist different hierarchy consisting of cores sharing similar property. Currently, no scheduler domain is defined separately for the cores that shares the last level cache. As a result, the scheduler fails to take advantage of cache locality while migrating tasks during load balancing. Here are the cpu masks currently present for sparc that are/can be used in scheduler domain construction. cpu_core_map : set based on the cores that shares l1 cache. core_core_sib_map : is set based on the socket id. The prior SPARC notion of socket was defined as highest level of shared cache. However, the MD record on T7 platforms now describes the CPUs that share the physical socket and this is no longer tied to shared cache. That's why a separate cpu mask needs to be created that truly represent highest level of shared cache for all platforms. Signed-off-by: Atish Patra Reviewed-by: Chris Hyser Signed-off-by: David S. Miller --- arch/sparc/include/asm/cpudata_64.h | 5 ++-- arch/sparc/include/asm/topology_64.h | 8 ++++++- arch/sparc/kernel/mdesc.c | 46 ++++++++++++++++++++++-------------- arch/sparc/kernel/smp_64.c | 8 +++++++ 4 files changed, 46 insertions(+), 21 deletions(-) diff --git a/arch/sparc/include/asm/cpudata_64.h b/arch/sparc/include/asm/cpudata_64.h index a6cfdabb6054..5b0ed48e5b0c 100644 --- a/arch/sparc/include/asm/cpudata_64.h +++ b/arch/sparc/include/asm/cpudata_64.h @@ -24,9 +24,10 @@ typedef struct { unsigned int icache_line_size; unsigned int ecache_size; unsigned int ecache_line_size; - unsigned short sock_id; + unsigned short sock_id; /* physical package */ unsigned short core_id; - int proc_id; + unsigned short max_cache_id; /* groupings of highest shared cache */ + unsigned short proc_id; /* strand (aka HW thread) id */ } cpuinfo_sparc; DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data); diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h index bec481aaca16..7b4898a36eee 100644 --- a/arch/sparc/include/asm/topology_64.h +++ b/arch/sparc/include/asm/topology_64.h @@ -44,14 +44,20 @@ int __node_distance(int, int); #define topology_physical_package_id(cpu) (cpu_data(cpu).proc_id) #define topology_core_id(cpu) (cpu_data(cpu).core_id) #define topology_core_cpumask(cpu) (&cpu_core_sib_map[cpu]) +#define topology_core_cache_cpumask(cpu) (&cpu_core_sib_cache_map[cpu]) #define topology_sibling_cpumask(cpu) (&per_cpu(cpu_sibling_map, cpu)) #endif /* CONFIG_SMP */ extern cpumask_t cpu_core_map[NR_CPUS]; extern cpumask_t cpu_core_sib_map[NR_CPUS]; +extern cpumask_t cpu_core_sib_cache_map[NR_CPUS]; + +/** + * Return cores that shares the last level cache. + */ static inline const struct cpumask *cpu_coregroup_mask(int cpu) { - return &cpu_core_map[cpu]; + return &cpu_core_sib_cache_map[cpu]; } #endif /* _ASM_SPARC64_TOPOLOGY_H */ diff --git a/arch/sparc/kernel/mdesc.c b/arch/sparc/kernel/mdesc.c index 11228861d9b4..8a6982dfd733 100644 --- a/arch/sparc/kernel/mdesc.c +++ b/arch/sparc/kernel/mdesc.c @@ -645,13 +645,20 @@ static void __mark_core_id(struct mdesc_handle *hp, u64 node, cpu_data(*id).core_id = core_id; } -static void __mark_sock_id(struct mdesc_handle *hp, u64 node, - int sock_id) +static void __mark_max_cache_id(struct mdesc_handle *hp, u64 node, + int max_cache_id) { const u64 *id = mdesc_get_property(hp, node, "id", NULL); - if (*id < num_possible_cpus()) - cpu_data(*id).sock_id = sock_id; + if (*id < num_possible_cpus()) { + cpu_data(*id).max_cache_id = max_cache_id; + + /** + * On systems without explicit socket descriptions socket + * is max_cache_id + */ + cpu_data(*id).sock_id = max_cache_id; + } } static void mark_core_ids(struct mdesc_handle *hp, u64 mp, @@ -660,10 +667,11 @@ static void mark_core_ids(struct mdesc_handle *hp, u64 mp, find_back_node_value(hp, mp, "cpu", __mark_core_id, core_id, 10); } -static void mark_sock_ids(struct mdesc_handle *hp, u64 mp, - int sock_id) +static void mark_max_cache_ids(struct mdesc_handle *hp, u64 mp, + int max_cache_id) { - find_back_node_value(hp, mp, "cpu", __mark_sock_id, sock_id, 10); + find_back_node_value(hp, mp, "cpu", __mark_max_cache_id, + max_cache_id, 10); } static void set_core_ids(struct mdesc_handle *hp) @@ -694,14 +702,15 @@ static void set_core_ids(struct mdesc_handle *hp) } } -static int set_sock_ids_by_cache(struct mdesc_handle *hp, int level) +static int set_max_cache_ids_by_cache(struct mdesc_handle *hp, int level) { u64 mp; int idx = 1; int fnd = 0; - /* Identify unique sockets by looking for cpus backpointed to by - * shared level n caches. + /** + * Identify unique highest level of shared cache by looking for cpus + * backpointed to by shared level N caches. */ mdesc_for_each_node_by_name(hp, mp, "cache") { const u64 *cur_lvl; @@ -709,8 +718,7 @@ static int set_sock_ids_by_cache(struct mdesc_handle *hp, int level) cur_lvl = mdesc_get_property(hp, mp, "level", NULL); if (*cur_lvl != level) continue; - - mark_sock_ids(hp, mp, idx); + mark_max_cache_ids(hp, mp, idx); idx++; fnd = 1; } @@ -745,15 +753,17 @@ static void set_sock_ids(struct mdesc_handle *hp) { u64 mp; - /* If machine description exposes sockets data use it. - * Otherwise fallback to use shared L3 or L2 caches. + /** + * Find the highest level of shared cache which pre-T7 is also + * the socket. */ + if (!set_max_cache_ids_by_cache(hp, 3)) + set_max_cache_ids_by_cache(hp, 2); + + /* If machine description exposes sockets data use it.*/ mp = mdesc_node_by_name(hp, MDESC_NODE_NULL, "sockets"); if (mp != MDESC_NODE_NULL) - return set_sock_ids_by_socket(hp, mp); - - if (!set_sock_ids_by_cache(hp, 3)) - set_sock_ids_by_cache(hp, 2); + set_sock_ids_by_socket(hp, mp); } static void mark_proc_ids(struct mdesc_handle *hp, u64 mp, int proc_id) diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c index d3035ba6cd31..8182f7caf5b1 100644 --- a/arch/sparc/kernel/smp_64.c +++ b/arch/sparc/kernel/smp_64.c @@ -63,9 +63,13 @@ cpumask_t cpu_core_map[NR_CPUS] __read_mostly = cpumask_t cpu_core_sib_map[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = CPU_MASK_NONE }; +cpumask_t cpu_core_sib_cache_map[NR_CPUS] __read_mostly = { + [0 ... NR_CPUS - 1] = CPU_MASK_NONE }; + EXPORT_PER_CPU_SYMBOL(cpu_sibling_map); EXPORT_SYMBOL(cpu_core_map); EXPORT_SYMBOL(cpu_core_sib_map); +EXPORT_SYMBOL(cpu_core_sib_cache_map); static cpumask_t smp_commenced_mask; @@ -1265,6 +1269,10 @@ void smp_fill_in_sib_core_maps(void) unsigned int j; for_each_present_cpu(j) { + if (cpu_data(i).max_cache_id == + cpu_data(j).max_cache_id) + cpumask_set_cpu(j, &cpu_core_sib_cache_map[i]); + if (cpu_data(i).sock_id == cpu_data(j).sock_id) cpumask_set_cpu(j, &cpu_core_sib_map[i]); } -- cgit From 844bdf1b2a2f1790eba9e679bda1c632ee744d4e Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Fri, 21 Oct 2016 15:25:54 +0200 Subject: sparc64: Fix old style declaration GCC warnings Fix [-Wold-style-declaration] GCC warnings by moving the inline keyword before the return type. Signed-off-by: Tobias Klnuser Signed-off-by: David S. Miller --- arch/sparc/include/asm/spinlock_64.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/sparc/include/asm/spinlock_64.h b/arch/sparc/include/asm/spinlock_64.h index 87990b7c6b0d..07c9f2e9bf57 100644 --- a/arch/sparc/include/asm/spinlock_64.h +++ b/arch/sparc/include/asm/spinlock_64.h @@ -96,7 +96,7 @@ static inline void arch_spin_lock_flags(arch_spinlock_t *lock, unsigned long fla /* Multi-reader locks, these are much saner than the 32-bit Sparc ones... */ -static void inline arch_read_lock(arch_rwlock_t *lock) +static inline void arch_read_lock(arch_rwlock_t *lock) { unsigned long tmp1, tmp2; @@ -119,7 +119,7 @@ static void inline arch_read_lock(arch_rwlock_t *lock) : "memory"); } -static int inline arch_read_trylock(arch_rwlock_t *lock) +static inline int arch_read_trylock(arch_rwlock_t *lock) { int tmp1, tmp2; @@ -140,7 +140,7 @@ static int inline arch_read_trylock(arch_rwlock_t *lock) return tmp1; } -static void inline arch_read_unlock(arch_rwlock_t *lock) +static inline void arch_read_unlock(arch_rwlock_t *lock) { unsigned long tmp1, tmp2; @@ -156,7 +156,7 @@ static void inline arch_read_unlock(arch_rwlock_t *lock) : "memory"); } -static void inline arch_write_lock(arch_rwlock_t *lock) +static inline void arch_write_lock(arch_rwlock_t *lock) { unsigned long mask, tmp1, tmp2; @@ -181,7 +181,7 @@ static void inline arch_write_lock(arch_rwlock_t *lock) : "memory"); } -static void inline arch_write_unlock(arch_rwlock_t *lock) +static inline void arch_write_unlock(arch_rwlock_t *lock) { __asm__ __volatile__( " stw %%g0, [%0]" @@ -190,7 +190,7 @@ static void inline arch_write_unlock(arch_rwlock_t *lock) : "memory"); } -static int inline arch_write_trylock(arch_rwlock_t *lock) +static inline int arch_write_trylock(arch_rwlock_t *lock) { unsigned long mask, tmp1, tmp2, result; -- cgit From ee9e83973d54d94ff776892219b723de54429548 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Fri, 21 Oct 2016 15:39:03 +0200 Subject: sparc32: Fix old style declaration GCC warnings Fix [-Wold-style-declaration] GCC warnings by moving the inline keyword before the return type. Signed-off-by: Tobias Klauser Signed-off-by: David S. Miller --- arch/sparc/include/asm/spinlock_32.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc/include/asm/spinlock_32.h b/arch/sparc/include/asm/spinlock_32.h index d9c5876c6121..8011e79f59c9 100644 --- a/arch/sparc/include/asm/spinlock_32.h +++ b/arch/sparc/include/asm/spinlock_32.h @@ -134,7 +134,7 @@ static inline void arch_write_lock(arch_rwlock_t *rw) *(volatile __u32 *)&lp->lock = ~0U; } -static void inline arch_write_unlock(arch_rwlock_t *lock) +static inline void arch_write_unlock(arch_rwlock_t *lock) { __asm__ __volatile__( " st %%g0, [%0]" -- cgit From aa95ce361ed95c72ac42dcb315166bce5cf1a014 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 10 Aug 2016 14:41:33 -0700 Subject: sparc64: Delete __ret_efault. It is completely unused. Signed-off-by: David S. Miller --- arch/sparc/include/asm/uaccess_64.h | 1 - arch/sparc/kernel/head_64.S | 8 +------- 2 files changed, 1 insertion(+), 8 deletions(-) diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h index b68acc563235..f8518df34b63 100644 --- a/arch/sparc/include/asm/uaccess_64.h +++ b/arch/sparc/include/asm/uaccess_64.h @@ -82,7 +82,6 @@ static inline int access_ok(int type, const void __user * addr, unsigned long si return 1; } -void __ret_efault(void); void __retl_efault(void); /* Uh, these should become the main single-value transfer routines.. diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S index beba6c11554c..603d73654295 100644 --- a/arch/sparc/kernel/head_64.S +++ b/arch/sparc/kernel/head_64.S @@ -926,13 +926,7 @@ tlb_type: .word 0 /* Must NOT end up in BSS */ EXPORT_SYMBOL(tlb_type) .section ".fixup",#alloc,#execinstr - .globl __ret_efault, __retl_efault, __ret_one, __retl_one -ENTRY(__ret_efault) - ret - restore %g0, -EFAULT, %o0 -ENDPROC(__ret_efault) -EXPORT_SYMBOL(__ret_efault) - + .globl __retl_efault, __ret_one, __retl_one ENTRY(__retl_efault) retl mov -EFAULT, %o0 -- cgit From 83a17d2661674d8c198adc0e183418f72aabab79 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 15 Aug 2016 14:47:54 -0700 Subject: sparc64: Prepare to move to more saner user copy exception handling. The fixup helper function mechanism for handling user copy fault handling is not %100 accurrate, and can never be made so. We are going to transition the code to return the running return return length, which is always kept track in one or more registers of each of these routines. In order to convert them one by one, we have to allow the existing behavior to continue functioning. Therefore make all the copy code that wants the fixup helper to be used return negative one. After all of the user copy routines have been converted, this logic and the fixup helpers themselves can be removed completely. Signed-off-by: David S. Miller --- arch/sparc/include/asm/uaccess_64.h | 21 +++++++++++++++------ arch/sparc/kernel/head_64.S | 23 +++++++++++------------ arch/sparc/lib/GENcopy_from_user.S | 2 +- arch/sparc/lib/GENcopy_to_user.S | 2 +- arch/sparc/lib/NG2copy_from_user.S | 4 ++-- arch/sparc/lib/NG2copy_to_user.S | 4 ++-- arch/sparc/lib/NG4copy_from_user.S | 4 ++-- arch/sparc/lib/NG4copy_to_user.S | 4 ++-- arch/sparc/lib/NGcopy_from_user.S | 2 +- arch/sparc/lib/NGcopy_to_user.S | 2 +- arch/sparc/lib/U1copy_from_user.S | 4 ++-- arch/sparc/lib/U1copy_to_user.S | 4 ++-- arch/sparc/lib/U3copy_from_user.S | 4 ++-- arch/sparc/lib/U3copy_to_user.S | 4 ++-- arch/sparc/lib/copy_in_user.S | 2 +- 15 files changed, 47 insertions(+), 39 deletions(-) diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h index f8518df34b63..0244012435c8 100644 --- a/arch/sparc/include/asm/uaccess_64.h +++ b/arch/sparc/include/asm/uaccess_64.h @@ -198,8 +198,11 @@ copy_from_user(void *to, const void __user *from, unsigned long size) check_object_size(to, size, false); ret = ___copy_from_user(to, from, size); - if (unlikely(ret)) - ret = copy_from_user_fixup(to, from, size); + if (unlikely(ret)) { + if ((long)ret < 0) + ret = copy_from_user_fixup(to, from, size); + return ret; + } return ret; } @@ -218,8 +221,11 @@ copy_to_user(void __user *to, const void *from, unsigned long size) check_object_size(from, size, true); ret = ___copy_to_user(to, from, size); - if (unlikely(ret)) - ret = copy_to_user_fixup(to, from, size); + if (unlikely(ret)) { + if ((long)ret < 0) + ret = copy_to_user_fixup(to, from, size); + return ret; + } return ret; } #define __copy_to_user copy_to_user @@ -234,8 +240,11 @@ copy_in_user(void __user *to, void __user *from, unsigned long size) { unsigned long ret = ___copy_in_user(to, from, size); - if (unlikely(ret)) - ret = copy_in_user_fixup(to, from, size); + if (unlikely(ret)) { + if ((long)ret < 0) + ret = copy_in_user_fixup(to, from, size); + return ret; + } return ret; } #define __copy_in_user copy_in_user diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S index 603d73654295..5f17de6b5fc3 100644 --- a/arch/sparc/kernel/head_64.S +++ b/arch/sparc/kernel/head_64.S @@ -926,41 +926,40 @@ tlb_type: .word 0 /* Must NOT end up in BSS */ EXPORT_SYMBOL(tlb_type) .section ".fixup",#alloc,#execinstr - .globl __retl_efault, __ret_one, __retl_one ENTRY(__retl_efault) retl mov -EFAULT, %o0 ENDPROC(__retl_efault) -ENTRY(__retl_one) +ENTRY(__retl_mone) retl - mov 1, %o0 -ENDPROC(__retl_one) + mov -1, %o0 +ENDPROC(__retl_mone) -ENTRY(__retl_one_fp) +ENTRY(__retl_mone_fp) VISExitHalf retl mov 1, %o0 -ENDPROC(__retl_one_fp) +ENDPROC(__retl_mone_fp) -ENTRY(__ret_one_asi) +ENTRY(__ret_mone_asi) wr %g0, ASI_AIUS, %asi ret restore %g0, 1, %o0 -ENDPROC(__ret_one_asi) +ENDPROC(__ret_mone_asi) -ENTRY(__retl_one_asi) +ENTRY(__retl_mone_asi) wr %g0, ASI_AIUS, %asi retl mov 1, %o0 -ENDPROC(__retl_one_asi) +ENDPROC(__retl_mone_asi) -ENTRY(__retl_one_asi_fp) +ENTRY(__retl_mone_asi_fp) wr %g0, ASI_AIUS, %asi VISExitHalf retl mov 1, %o0 -ENDPROC(__retl_one_asi_fp) +ENDPROC(__retl_mone_asi_fp) ENTRY(__retl_o1) retl diff --git a/arch/sparc/lib/GENcopy_from_user.S b/arch/sparc/lib/GENcopy_from_user.S index b7d0bd6b1406..5bce68202246 100644 --- a/arch/sparc/lib/GENcopy_from_user.S +++ b/arch/sparc/lib/GENcopy_from_user.S @@ -7,7 +7,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one; \ + .word 98b, __retl_mone; \ .text; \ .align 4; diff --git a/arch/sparc/lib/GENcopy_to_user.S b/arch/sparc/lib/GENcopy_to_user.S index 780550e1afc7..f663ce3ee8d9 100644 --- a/arch/sparc/lib/GENcopy_to_user.S +++ b/arch/sparc/lib/GENcopy_to_user.S @@ -7,7 +7,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one; \ + .word 98b, __retl_mone; \ .text; \ .align 4; diff --git a/arch/sparc/lib/NG2copy_from_user.S b/arch/sparc/lib/NG2copy_from_user.S index d5242b8c4f94..4d47fa5519d4 100644 --- a/arch/sparc/lib/NG2copy_from_user.S +++ b/arch/sparc/lib/NG2copy_from_user.S @@ -7,7 +7,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one_asi;\ + .word 98b, __retl_mone_asi;\ .text; \ .align 4; @@ -15,7 +15,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one_asi_fp;\ + .word 98b, __retl_mone_asi_fp;\ .text; \ .align 4; diff --git a/arch/sparc/lib/NG2copy_to_user.S b/arch/sparc/lib/NG2copy_to_user.S index 4e962d993b10..2078d752709a 100644 --- a/arch/sparc/lib/NG2copy_to_user.S +++ b/arch/sparc/lib/NG2copy_to_user.S @@ -7,7 +7,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one_asi;\ + .word 98b, __retl_mone_asi;\ .text; \ .align 4; @@ -15,7 +15,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one_asi_fp;\ + .word 98b, __retl_mone_asi_fp;\ .text; \ .align 4; diff --git a/arch/sparc/lib/NG4copy_from_user.S b/arch/sparc/lib/NG4copy_from_user.S index 2e8ee7ad07a9..f9746e7cf25e 100644 --- a/arch/sparc/lib/NG4copy_from_user.S +++ b/arch/sparc/lib/NG4copy_from_user.S @@ -7,7 +7,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one_asi;\ + .word 98b, __retl_mone_asi;\ .text; \ .align 4; @@ -15,7 +15,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one_asi_fp;\ + .word 98b, __retl_mone_asi_fp;\ .text; \ .align 4; diff --git a/arch/sparc/lib/NG4copy_to_user.S b/arch/sparc/lib/NG4copy_to_user.S index be0bf4590df8..5fa44349adde 100644 --- a/arch/sparc/lib/NG4copy_to_user.S +++ b/arch/sparc/lib/NG4copy_to_user.S @@ -7,7 +7,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one_asi;\ + .word 98b, __retl_mone_asi;\ .text; \ .align 4; @@ -15,7 +15,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one_asi_fp;\ + .word 98b, __retl_mone_asi_fp;\ .text; \ .align 4; diff --git a/arch/sparc/lib/NGcopy_from_user.S b/arch/sparc/lib/NGcopy_from_user.S index 5d1e4d1ac21e..e61694c444af 100644 --- a/arch/sparc/lib/NGcopy_from_user.S +++ b/arch/sparc/lib/NGcopy_from_user.S @@ -7,7 +7,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __ret_one_asi;\ + .word 98b, __ret_mone_asi;\ .text; \ .align 4; diff --git a/arch/sparc/lib/NGcopy_to_user.S b/arch/sparc/lib/NGcopy_to_user.S index ff630dcb273c..2d6b33d3998f 100644 --- a/arch/sparc/lib/NGcopy_to_user.S +++ b/arch/sparc/lib/NGcopy_to_user.S @@ -7,7 +7,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __ret_one_asi;\ + .word 98b, __ret_mone_asi;\ .text; \ .align 4; diff --git a/arch/sparc/lib/U1copy_from_user.S b/arch/sparc/lib/U1copy_from_user.S index ecc5692fa2b4..1ad59fbac7a7 100644 --- a/arch/sparc/lib/U1copy_from_user.S +++ b/arch/sparc/lib/U1copy_from_user.S @@ -7,7 +7,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one; \ + .word 98b, __retl_mone; \ .text; \ .align 4; @@ -15,7 +15,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one_fp;\ + .word 98b, __retl_mone_fp;\ .text; \ .align 4; diff --git a/arch/sparc/lib/U1copy_to_user.S b/arch/sparc/lib/U1copy_to_user.S index 9eea392e44d4..adcc3a510185 100644 --- a/arch/sparc/lib/U1copy_to_user.S +++ b/arch/sparc/lib/U1copy_to_user.S @@ -7,7 +7,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one; \ + .word 98b, __retl_mone; \ .text; \ .align 4; @@ -15,7 +15,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one_fp;\ + .word 98b, __retl_mone_fp;\ .text; \ .align 4; diff --git a/arch/sparc/lib/U3copy_from_user.S b/arch/sparc/lib/U3copy_from_user.S index 88ad73d86fe4..1046e2b083fe 100644 --- a/arch/sparc/lib/U3copy_from_user.S +++ b/arch/sparc/lib/U3copy_from_user.S @@ -7,7 +7,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one; \ + .word 98b, __retl_mone; \ .text; \ .align 4; @@ -15,7 +15,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one_fp;\ + .word 98b, __retl_mone_fp;\ .text; \ .align 4; diff --git a/arch/sparc/lib/U3copy_to_user.S b/arch/sparc/lib/U3copy_to_user.S index 845139d75537..032b0c5419b0 100644 --- a/arch/sparc/lib/U3copy_to_user.S +++ b/arch/sparc/lib/U3copy_to_user.S @@ -7,7 +7,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one; \ + .word 98b, __retl_mone; \ .text; \ .align 4; @@ -15,7 +15,7 @@ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one_fp;\ + .word 98b, __retl_mone_fp;\ .text; \ .align 4; diff --git a/arch/sparc/lib/copy_in_user.S b/arch/sparc/lib/copy_in_user.S index 482de093bdae..86e6663dd4e0 100644 --- a/arch/sparc/lib/copy_in_user.S +++ b/arch/sparc/lib/copy_in_user.S @@ -13,7 +13,7 @@ 98: x,y; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_one; \ + .word 98b, __retl_mone; \ .text; \ .align 4; -- cgit From 0096ac9f47b1a2e851b3165d44065d18e5f13d58 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 15 Aug 2016 15:08:18 -0700 Subject: sparc64: Convert copy_in_user to accurate exception reporting. Report the exact number of bytes which have not been successfully copied when an exception occurs, using the running remaining length. Signed-off-by: David S. Miller --- arch/sparc/lib/copy_in_user.S | 35 +++++++++++++++++++++++++---------- 1 file changed, 25 insertions(+), 10 deletions(-) diff --git a/arch/sparc/lib/copy_in_user.S b/arch/sparc/lib/copy_in_user.S index 86e6663dd4e0..0252b218de45 100644 --- a/arch/sparc/lib/copy_in_user.S +++ b/arch/sparc/lib/copy_in_user.S @@ -9,18 +9,33 @@ #define XCC xcc -#define EX(x,y) \ +#define EX(x,y,z) \ 98: x,y; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone; \ + .word 98b, z; \ .text; \ .align 4; +#define EX_O4(x,y) EX(x,y,__retl_o4_plus_8) +#define EX_O2_4(x,y) EX(x,y,__retl_o2_plus_4) +#define EX_O2_1(x,y) EX(x,y,__retl_o2_plus_1) + .register %g2,#scratch .register %g3,#scratch .text +__retl_o4_plus_8: + add %o4, %o2, %o4 + retl + add %o4, 8, %o0 +__retl_o2_plus_4: + retl + add %o2, 4, %o0 +__retl_o2_plus_1: + retl + add %o2, 1, %o0 + .align 32 /* Don't try to get too fancy here, just nice and @@ -45,8 +60,8 @@ ENTRY(___copy_in_user) /* %o0=dst, %o1=src, %o2=len */ andn %o2, 0x7, %o4 and %o2, 0x7, %o2 1: subcc %o4, 0x8, %o4 - EX(ldxa [%o1] %asi, %o5) - EX(stxa %o5, [%o0] %asi) + EX_O4(ldxa [%o1] %asi, %o5) + EX_O4(stxa %o5, [%o0] %asi) add %o1, 0x8, %o1 bgu,pt %XCC, 1b add %o0, 0x8, %o0 @@ -54,8 +69,8 @@ ENTRY(___copy_in_user) /* %o0=dst, %o1=src, %o2=len */ be,pt %XCC, 1f nop sub %o2, 0x4, %o2 - EX(lduwa [%o1] %asi, %o5) - EX(stwa %o5, [%o0] %asi) + EX_O2_4(lduwa [%o1] %asi, %o5) + EX_O2_4(stwa %o5, [%o0] %asi) add %o1, 0x4, %o1 add %o0, 0x4, %o0 1: cmp %o2, 0 @@ -71,8 +86,8 @@ ENTRY(___copy_in_user) /* %o0=dst, %o1=src, %o2=len */ 82: subcc %o2, 4, %o2 - EX(lduwa [%o1] %asi, %g1) - EX(stwa %g1, [%o0] %asi) + EX_O2_4(lduwa [%o1] %asi, %g1) + EX_O2_4(stwa %g1, [%o0] %asi) add %o1, 4, %o1 bgu,pt %XCC, 82b add %o0, 4, %o0 @@ -83,8 +98,8 @@ ENTRY(___copy_in_user) /* %o0=dst, %o1=src, %o2=len */ .align 32 90: subcc %o2, 1, %o2 - EX(lduba [%o1] %asi, %g1) - EX(stba %g1, [%o0] %asi) + EX_O2_1(lduba [%o1] %asi, %g1) + EX_O2_1(stba %g1, [%o0] %asi) add %o1, 1, %o1 bgu,pt %XCC, 90b add %o0, 1, %o0 -- cgit From d0796b555ba60c22eb41ae39a8362156cb08eee9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 15 Aug 2016 15:26:38 -0700 Subject: sparc64: Convert GENcopy_{from,to}_user to accurate exception reporting. Report the exact number of bytes which have not been successfully copied when an exception occurs, using the running remaining length. Signed-off-by: David S. Miller --- arch/sparc/lib/GENcopy_from_user.S | 4 ++-- arch/sparc/lib/GENcopy_to_user.S | 4 ++-- arch/sparc/lib/GENmemcpy.S | 48 +++++++++++++++++++++++++++----------- 3 files changed, 38 insertions(+), 18 deletions(-) diff --git a/arch/sparc/lib/GENcopy_from_user.S b/arch/sparc/lib/GENcopy_from_user.S index 5bce68202246..69a439fa2fc1 100644 --- a/arch/sparc/lib/GENcopy_from_user.S +++ b/arch/sparc/lib/GENcopy_from_user.S @@ -3,11 +3,11 @@ * Copyright (C) 2007 David S. Miller (davem@davemloft.net) */ -#define EX_LD(x) \ +#define EX_LD(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone; \ + .word 98b, y; \ .text; \ .align 4; diff --git a/arch/sparc/lib/GENcopy_to_user.S b/arch/sparc/lib/GENcopy_to_user.S index f663ce3ee8d9..9947427ce354 100644 --- a/arch/sparc/lib/GENcopy_to_user.S +++ b/arch/sparc/lib/GENcopy_to_user.S @@ -3,11 +3,11 @@ * Copyright (C) 2007 David S. Miller (davem@davemloft.net) */ -#define EX_ST(x) \ +#define EX_ST(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone; \ + .word 98b, y; \ .text; \ .align 4; diff --git a/arch/sparc/lib/GENmemcpy.S b/arch/sparc/lib/GENmemcpy.S index 89358ee94851..059ea24ad73d 100644 --- a/arch/sparc/lib/GENmemcpy.S +++ b/arch/sparc/lib/GENmemcpy.S @@ -4,21 +4,18 @@ */ #ifdef __KERNEL__ +#include #define GLOBAL_SPARE %g7 #else #define GLOBAL_SPARE %g5 #endif #ifndef EX_LD -#define EX_LD(x) x +#define EX_LD(x,y) x #endif #ifndef EX_ST -#define EX_ST(x) x -#endif - -#ifndef EX_RETVAL -#define EX_RETVAL(x) x +#define EX_ST(x,y) x #endif #ifndef LOAD @@ -45,6 +42,29 @@ .register %g3,#scratch .text + +#ifndef EX_RETVAL +#define EX_RETVAL(x) x +ENTRY(GEN_retl_o4_1) + add %o4, %o2, %o4 + retl + add %o4, 1, %o0 +ENDPROC(GEN_retl_o4_1) +ENTRY(GEN_retl_g1_8) + add %g1, %o2, %g1 + retl + add %g1, 8, %o0 +ENDPROC(GEN_retl_g1_8) +ENTRY(GEN_retl_o2_4) + retl + add %o2, 4, %o0 +ENDPROC(GEN_retl_o2_4) +ENTRY(GEN_retl_o2_1) + retl + add %o2, 1, %o0 +ENDPROC(GEN_retl_o2_1) +#endif + .align 64 .globl FUNC_NAME @@ -73,8 +93,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ sub %g0, %o4, %o4 sub %o2, %o4, %o2 1: subcc %o4, 1, %o4 - EX_LD(LOAD(ldub, %o1, %g1)) - EX_ST(STORE(stb, %g1, %o0)) + EX_LD(LOAD(ldub, %o1, %g1),GEN_retl_o4_1) + EX_ST(STORE(stb, %g1, %o0),GEN_retl_o4_1) add %o1, 1, %o1 bne,pt %XCC, 1b add %o0, 1, %o0 @@ -82,8 +102,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ andn %o2, 0x7, %g1 sub %o2, %g1, %o2 1: subcc %g1, 0x8, %g1 - EX_LD(LOAD(ldx, %o1, %g2)) - EX_ST(STORE(stx, %g2, %o0)) + EX_LD(LOAD(ldx, %o1, %g2),GEN_retl_g1_8) + EX_ST(STORE(stx, %g2, %o0),GEN_retl_g1_8) add %o1, 0x8, %o1 bne,pt %XCC, 1b add %o0, 0x8, %o0 @@ -100,8 +120,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 1: subcc %o2, 4, %o2 - EX_LD(LOAD(lduw, %o1, %g1)) - EX_ST(STORE(stw, %g1, %o1 + %o3)) + EX_LD(LOAD(lduw, %o1, %g1),GEN_retl_o2_4) + EX_ST(STORE(stw, %g1, %o1 + %o3),GEN_retl_o2_4) bgu,pt %XCC, 1b add %o1, 4, %o1 @@ -111,8 +131,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ .align 32 90: subcc %o2, 1, %o2 - EX_LD(LOAD(ldub, %o1, %g1)) - EX_ST(STORE(stb, %g1, %o1 + %o3)) + EX_LD(LOAD(ldub, %o1, %g1),GEN_retl_o2_1) + EX_ST(STORE(stb, %g1, %o1 + %o3),GEN_retl_o2_1) bgu,pt %XCC, 90b add %o1, 1, %o1 retl -- cgit From cb736fdbb208eb3420f1a2eb2bfc024a6e9dcada Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 15 Aug 2016 16:07:50 -0700 Subject: sparc64: Convert U1copy_{from,to}_user to accurate exception reporting. Report the exact number of bytes which have not been successfully copied when an exception occurs, using the running remaining length. Signed-off-by: David S. Miller --- arch/sparc/lib/U1copy_from_user.S | 8 +- arch/sparc/lib/U1copy_to_user.S | 8 +- arch/sparc/lib/U1memcpy.S | 345 +++++++++++++++++++++++++------------- 3 files changed, 237 insertions(+), 124 deletions(-) diff --git a/arch/sparc/lib/U1copy_from_user.S b/arch/sparc/lib/U1copy_from_user.S index 1ad59fbac7a7..bb6ff73229e3 100644 --- a/arch/sparc/lib/U1copy_from_user.S +++ b/arch/sparc/lib/U1copy_from_user.S @@ -3,19 +3,19 @@ * Copyright (C) 1999, 2000, 2004 David S. Miller (davem@redhat.com) */ -#define EX_LD(x) \ +#define EX_LD(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone; \ + .word 98b, y; \ .text; \ .align 4; -#define EX_LD_FP(x) \ +#define EX_LD_FP(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone_fp;\ + .word 98b, y; \ .text; \ .align 4; diff --git a/arch/sparc/lib/U1copy_to_user.S b/arch/sparc/lib/U1copy_to_user.S index adcc3a510185..ed92ce739558 100644 --- a/arch/sparc/lib/U1copy_to_user.S +++ b/arch/sparc/lib/U1copy_to_user.S @@ -3,19 +3,19 @@ * Copyright (C) 1999, 2000, 2004 David S. Miller (davem@redhat.com) */ -#define EX_ST(x) \ +#define EX_ST(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone; \ + .word 98b, y; \ .text; \ .align 4; -#define EX_ST_FP(x) \ +#define EX_ST_FP(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone_fp;\ + .word 98b, y; \ .text; \ .align 4; diff --git a/arch/sparc/lib/U1memcpy.S b/arch/sparc/lib/U1memcpy.S index 97e1b211090c..4f0d50b33a72 100644 --- a/arch/sparc/lib/U1memcpy.S +++ b/arch/sparc/lib/U1memcpy.S @@ -5,6 +5,7 @@ */ #ifdef __KERNEL__ +#include #include #include #include @@ -24,21 +25,17 @@ #endif #ifndef EX_LD -#define EX_LD(x) x +#define EX_LD(x,y) x #endif #ifndef EX_LD_FP -#define EX_LD_FP(x) x +#define EX_LD_FP(x,y) x #endif #ifndef EX_ST -#define EX_ST(x) x +#define EX_ST(x,y) x #endif #ifndef EX_ST_FP -#define EX_ST_FP(x) x -#endif - -#ifndef EX_RETVAL -#define EX_RETVAL(x) x +#define EX_ST_FP(x,y) x #endif #ifndef LOAD @@ -79,53 +76,169 @@ faligndata %f7, %f8, %f60; \ faligndata %f8, %f9, %f62; -#define MAIN_LOOP_CHUNK(src, dest, fdest, fsrc, len, jmptgt) \ - EX_LD_FP(LOAD_BLK(%src, %fdest)); \ - EX_ST_FP(STORE_BLK(%fsrc, %dest)); \ - add %src, 0x40, %src; \ - subcc %len, 0x40, %len; \ - be,pn %xcc, jmptgt; \ - add %dest, 0x40, %dest; \ - -#define LOOP_CHUNK1(src, dest, len, branch_dest) \ - MAIN_LOOP_CHUNK(src, dest, f0, f48, len, branch_dest) -#define LOOP_CHUNK2(src, dest, len, branch_dest) \ - MAIN_LOOP_CHUNK(src, dest, f16, f48, len, branch_dest) -#define LOOP_CHUNK3(src, dest, len, branch_dest) \ - MAIN_LOOP_CHUNK(src, dest, f32, f48, len, branch_dest) +#define MAIN_LOOP_CHUNK(src, dest, fdest, fsrc, jmptgt) \ + EX_LD_FP(LOAD_BLK(%src, %fdest), U1_gs_80_fp); \ + EX_ST_FP(STORE_BLK(%fsrc, %dest), U1_gs_80_fp); \ + add %src, 0x40, %src; \ + subcc %GLOBAL_SPARE, 0x40, %GLOBAL_SPARE; \ + be,pn %xcc, jmptgt; \ + add %dest, 0x40, %dest; \ + +#define LOOP_CHUNK1(src, dest, branch_dest) \ + MAIN_LOOP_CHUNK(src, dest, f0, f48, branch_dest) +#define LOOP_CHUNK2(src, dest, branch_dest) \ + MAIN_LOOP_CHUNK(src, dest, f16, f48, branch_dest) +#define LOOP_CHUNK3(src, dest, branch_dest) \ + MAIN_LOOP_CHUNK(src, dest, f32, f48, branch_dest) #define DO_SYNC membar #Sync; #define STORE_SYNC(dest, fsrc) \ - EX_ST_FP(STORE_BLK(%fsrc, %dest)); \ + EX_ST_FP(STORE_BLK(%fsrc, %dest), U1_gs_80_fp); \ add %dest, 0x40, %dest; \ DO_SYNC #define STORE_JUMP(dest, fsrc, target) \ - EX_ST_FP(STORE_BLK(%fsrc, %dest)); \ + EX_ST_FP(STORE_BLK(%fsrc, %dest), U1_gs_40_fp); \ add %dest, 0x40, %dest; \ ba,pt %xcc, target; \ nop; -#define FINISH_VISCHUNK(dest, f0, f1, left) \ - subcc %left, 8, %left;\ - bl,pn %xcc, 95f; \ - faligndata %f0, %f1, %f48; \ - EX_ST_FP(STORE(std, %f48, %dest)); \ +#define FINISH_VISCHUNK(dest, f0, f1) \ + subcc %g3, 8, %g3; \ + bl,pn %xcc, 95f; \ + faligndata %f0, %f1, %f48; \ + EX_ST_FP(STORE(std, %f48, %dest), U1_g3_8_fp); \ add %dest, 8, %dest; -#define UNEVEN_VISCHUNK_LAST(dest, f0, f1, left) \ - subcc %left, 8, %left; \ - bl,pn %xcc, 95f; \ +#define UNEVEN_VISCHUNK_LAST(dest, f0, f1) \ + subcc %g3, 8, %g3; \ + bl,pn %xcc, 95f; \ fsrc2 %f0, %f1; -#define UNEVEN_VISCHUNK(dest, f0, f1, left) \ - UNEVEN_VISCHUNK_LAST(dest, f0, f1, left) \ +#define UNEVEN_VISCHUNK(dest, f0, f1) \ + UNEVEN_VISCHUNK_LAST(dest, f0, f1) \ ba,a,pt %xcc, 93f; .register %g2,#scratch .register %g3,#scratch .text +#ifndef EX_RETVAL +#define EX_RETVAL(x) x +ENTRY(U1_g1_1_fp) + VISExitHalf + add %g1, 1, %g1 + add %g1, %g2, %g1 + retl + add %g1, %o2, %o0 +ENDPROC(U1_g1_1_fp) +ENTRY(U1_g2_0_fp) + VISExitHalf + retl + add %g2, %o2, %o0 +ENDPROC(U1_g2_0_fp) +ENTRY(U1_g2_8_fp) + VISExitHalf + add %g2, 8, %g2 + retl + add %g2, %o2, %o0 +ENDPROC(U1_g2_8_fp) +ENTRY(U1_gs_0_fp) + VISExitHalf + add %GLOBAL_SPARE, %g3, %o0 + retl + add %o0, %o2, %o0 +ENDPROC(U1_gs_0_fp) +ENTRY(U1_gs_80_fp) + VISExitHalf + add %GLOBAL_SPARE, 0x80, %GLOBAL_SPARE + add %GLOBAL_SPARE, %g3, %o0 + retl + add %o0, %o2, %o0 +ENDPROC(U1_gs_80_fp) +ENTRY(U1_gs_40_fp) + VISExitHalf + add %GLOBAL_SPARE, 0x40, %GLOBAL_SPARE + add %GLOBAL_SPARE, %g3, %o0 + retl + add %o0, %o2, %o0 +ENDPROC(U1_gs_40_fp) +ENTRY(U1_g3_0_fp) + VISExitHalf + retl + add %g3, %o2, %o0 +ENDPROC(U1_g3_0_fp) +ENTRY(U1_g3_8_fp) + VISExitHalf + add %g3, 8, %g3 + retl + add %g3, %o2, %o0 +ENDPROC(U1_g3_8_fp) +ENTRY(U1_o2_0_fp) + VISExitHalf + retl + mov %o2, %o0 +ENDPROC(U1_o2_0_fp) +ENTRY(U1_o2_1_fp) + VISExitHalf + retl + add %o2, 1, %o0 +ENDPROC(U1_o2_1_fp) +ENTRY(U1_gs_0) + VISExitHalf + retl + add %GLOBAL_SPARE, %o2, %o0 +ENDPROC(U1_gs_0) +ENTRY(U1_gs_8) + VISExitHalf + add %GLOBAL_SPARE, %o2, %GLOBAL_SPARE + retl + add %GLOBAL_SPARE, 0x8, %o0 +ENDPROC(U1_gs_8) +ENTRY(U1_gs_10) + VISExitHalf + add %GLOBAL_SPARE, %o2, %GLOBAL_SPARE + retl + add %GLOBAL_SPARE, 0x10, %o0 +ENDPROC(U1_gs_10) +ENTRY(U1_o2_0) + retl + mov %o2, %o0 +ENDPROC(U1_o2_0) +ENTRY(U1_o2_8) + retl + add %o2, 8, %o0 +ENDPROC(U1_o2_8) +ENTRY(U1_o2_4) + retl + add %o2, 4, %o0 +ENDPROC(U1_o2_4) +ENTRY(U1_o2_1) + retl + add %o2, 1, %o0 +ENDPROC(U1_o2_1) +ENTRY(U1_g1_0) + retl + add %g1, %o2, %o0 +ENDPROC(U1_g1_0) +ENTRY(U1_g1_1) + add %g1, 1, %g1 + retl + add %g1, %o2, %o0 +ENDPROC(U1_g1_1) +ENTRY(U1_gs_0_o2_adj) + and %o2, 7, %o2 + retl + add %GLOBAL_SPARE, %o2, %o0 +ENDPROC(U1_gs_0_o2_adj) +ENTRY(U1_gs_8_o2_adj) + and %o2, 7, %o2 + add %GLOBAL_SPARE, 8, %GLOBAL_SPARE + retl + add %GLOBAL_SPARE, %o2, %o0 +ENDPROC(U1_gs_8_o2_adj) +#endif + .align 64 .globl FUNC_NAME @@ -167,8 +280,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ and %g2, 0x38, %g2 1: subcc %g1, 0x1, %g1 - EX_LD_FP(LOAD(ldub, %o1 + 0x00, %o3)) - EX_ST_FP(STORE(stb, %o3, %o1 + %GLOBAL_SPARE)) + EX_LD_FP(LOAD(ldub, %o1 + 0x00, %o3), U1_g1_1_fp) + EX_ST_FP(STORE(stb, %o3, %o1 + %GLOBAL_SPARE), U1_g1_1_fp) bgu,pt %XCC, 1b add %o1, 0x1, %o1 @@ -179,20 +292,20 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ be,pt %icc, 3f alignaddr %o1, %g0, %o1 - EX_LD_FP(LOAD(ldd, %o1, %f4)) -1: EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f6)) + EX_LD_FP(LOAD(ldd, %o1, %f4), U1_g2_0_fp) +1: EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f6), U1_g2_0_fp) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f4, %f6, %f0 - EX_ST_FP(STORE(std, %f0, %o0)) + EX_ST_FP(STORE(std, %f0, %o0), U1_g2_8_fp) be,pn %icc, 3f add %o0, 0x8, %o0 - EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f4)) + EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f4), U1_g2_0_fp) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f6, %f4, %f0 - EX_ST_FP(STORE(std, %f0, %o0)) + EX_ST_FP(STORE(std, %f0, %o0), U1_g2_8_fp) bne,pt %icc, 1b add %o0, 0x8, %o0 @@ -215,13 +328,13 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ add %g1, %GLOBAL_SPARE, %g1 subcc %o2, %g3, %o2 - EX_LD_FP(LOAD_BLK(%o1, %f0)) + EX_LD_FP(LOAD_BLK(%o1, %f0), U1_gs_0_fp) add %o1, 0x40, %o1 add %g1, %g3, %g1 - EX_LD_FP(LOAD_BLK(%o1, %f16)) + EX_LD_FP(LOAD_BLK(%o1, %f16), U1_gs_0_fp) add %o1, 0x40, %o1 sub %GLOBAL_SPARE, 0x80, %GLOBAL_SPARE - EX_LD_FP(LOAD_BLK(%o1, %f32)) + EX_LD_FP(LOAD_BLK(%o1, %f32), U1_gs_80_fp) add %o1, 0x40, %o1 /* There are 8 instances of the unrolled loop, @@ -241,11 +354,11 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ .align 64 1: FREG_FROB(f0, f2, f4, f6, f8, f10,f12,f14,f16) - LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f) + LOOP_CHUNK1(o1, o0, 1f) FREG_FROB(f16,f18,f20,f22,f24,f26,f28,f30,f32) - LOOP_CHUNK2(o1, o0, GLOBAL_SPARE, 2f) + LOOP_CHUNK2(o1, o0, 2f) FREG_FROB(f32,f34,f36,f38,f40,f42,f44,f46,f0) - LOOP_CHUNK3(o1, o0, GLOBAL_SPARE, 3f) + LOOP_CHUNK3(o1, o0, 3f) ba,pt %xcc, 1b+4 faligndata %f0, %f2, %f48 1: FREG_FROB(f16,f18,f20,f22,f24,f26,f28,f30,f32) @@ -262,11 +375,11 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ STORE_JUMP(o0, f48, 56f) 1: FREG_FROB(f2, f4, f6, f8, f10,f12,f14,f16,f18) - LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f) + LOOP_CHUNK1(o1, o0, 1f) FREG_FROB(f18,f20,f22,f24,f26,f28,f30,f32,f34) - LOOP_CHUNK2(o1, o0, GLOBAL_SPARE, 2f) + LOOP_CHUNK2(o1, o0, 2f) FREG_FROB(f34,f36,f38,f40,f42,f44,f46,f0, f2) - LOOP_CHUNK3(o1, o0, GLOBAL_SPARE, 3f) + LOOP_CHUNK3(o1, o0, 3f) ba,pt %xcc, 1b+4 faligndata %f2, %f4, %f48 1: FREG_FROB(f18,f20,f22,f24,f26,f28,f30,f32,f34) @@ -283,11 +396,11 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ STORE_JUMP(o0, f48, 57f) 1: FREG_FROB(f4, f6, f8, f10,f12,f14,f16,f18,f20) - LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f) + LOOP_CHUNK1(o1, o0, 1f) FREG_FROB(f20,f22,f24,f26,f28,f30,f32,f34,f36) - LOOP_CHUNK2(o1, o0, GLOBAL_SPARE, 2f) + LOOP_CHUNK2(o1, o0, 2f) FREG_FROB(f36,f38,f40,f42,f44,f46,f0, f2, f4) - LOOP_CHUNK3(o1, o0, GLOBAL_SPARE, 3f) + LOOP_CHUNK3(o1, o0, 3f) ba,pt %xcc, 1b+4 faligndata %f4, %f6, %f48 1: FREG_FROB(f20,f22,f24,f26,f28,f30,f32,f34,f36) @@ -304,11 +417,11 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ STORE_JUMP(o0, f48, 58f) 1: FREG_FROB(f6, f8, f10,f12,f14,f16,f18,f20,f22) - LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f) + LOOP_CHUNK1(o1, o0, 1f) FREG_FROB(f22,f24,f26,f28,f30,f32,f34,f36,f38) - LOOP_CHUNK2(o1, o0, GLOBAL_SPARE, 2f) + LOOP_CHUNK2(o1, o0, 2f) FREG_FROB(f38,f40,f42,f44,f46,f0, f2, f4, f6) - LOOP_CHUNK3(o1, o0, GLOBAL_SPARE, 3f) + LOOP_CHUNK3(o1, o0, 3f) ba,pt %xcc, 1b+4 faligndata %f6, %f8, %f48 1: FREG_FROB(f22,f24,f26,f28,f30,f32,f34,f36,f38) @@ -325,11 +438,11 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ STORE_JUMP(o0, f48, 59f) 1: FREG_FROB(f8, f10,f12,f14,f16,f18,f20,f22,f24) - LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f) + LOOP_CHUNK1(o1, o0, 1f) FREG_FROB(f24,f26,f28,f30,f32,f34,f36,f38,f40) - LOOP_CHUNK2(o1, o0, GLOBAL_SPARE, 2f) + LOOP_CHUNK2(o1, o0, 2f) FREG_FROB(f40,f42,f44,f46,f0, f2, f4, f6, f8) - LOOP_CHUNK3(o1, o0, GLOBAL_SPARE, 3f) + LOOP_CHUNK3(o1, o0, 3f) ba,pt %xcc, 1b+4 faligndata %f8, %f10, %f48 1: FREG_FROB(f24,f26,f28,f30,f32,f34,f36,f38,f40) @@ -346,11 +459,11 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ STORE_JUMP(o0, f48, 60f) 1: FREG_FROB(f10,f12,f14,f16,f18,f20,f22,f24,f26) - LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f) + LOOP_CHUNK1(o1, o0, 1f) FREG_FROB(f26,f28,f30,f32,f34,f36,f38,f40,f42) - LOOP_CHUNK2(o1, o0, GLOBAL_SPARE, 2f) + LOOP_CHUNK2(o1, o0, 2f) FREG_FROB(f42,f44,f46,f0, f2, f4, f6, f8, f10) - LOOP_CHUNK3(o1, o0, GLOBAL_SPARE, 3f) + LOOP_CHUNK3(o1, o0, 3f) ba,pt %xcc, 1b+4 faligndata %f10, %f12, %f48 1: FREG_FROB(f26,f28,f30,f32,f34,f36,f38,f40,f42) @@ -367,11 +480,11 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ STORE_JUMP(o0, f48, 61f) 1: FREG_FROB(f12,f14,f16,f18,f20,f22,f24,f26,f28) - LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f) + LOOP_CHUNK1(o1, o0, 1f) FREG_FROB(f28,f30,f32,f34,f36,f38,f40,f42,f44) - LOOP_CHUNK2(o1, o0, GLOBAL_SPARE, 2f) + LOOP_CHUNK2(o1, o0, 2f) FREG_FROB(f44,f46,f0, f2, f4, f6, f8, f10,f12) - LOOP_CHUNK3(o1, o0, GLOBAL_SPARE, 3f) + LOOP_CHUNK3(o1, o0, 3f) ba,pt %xcc, 1b+4 faligndata %f12, %f14, %f48 1: FREG_FROB(f28,f30,f32,f34,f36,f38,f40,f42,f44) @@ -388,11 +501,11 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ STORE_JUMP(o0, f48, 62f) 1: FREG_FROB(f14,f16,f18,f20,f22,f24,f26,f28,f30) - LOOP_CHUNK1(o1, o0, GLOBAL_SPARE, 1f) + LOOP_CHUNK1(o1, o0, 1f) FREG_FROB(f30,f32,f34,f36,f38,f40,f42,f44,f46) - LOOP_CHUNK2(o1, o0, GLOBAL_SPARE, 2f) + LOOP_CHUNK2(o1, o0, 2f) FREG_FROB(f46,f0, f2, f4, f6, f8, f10,f12,f14) - LOOP_CHUNK3(o1, o0, GLOBAL_SPARE, 3f) + LOOP_CHUNK3(o1, o0, 3f) ba,pt %xcc, 1b+4 faligndata %f14, %f16, %f48 1: FREG_FROB(f30,f32,f34,f36,f38,f40,f42,f44,f46) @@ -408,53 +521,53 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ FREG_FROB(f30,f32,f34,f36,f38,f40,f42,f44,f46) STORE_JUMP(o0, f48, 63f) -40: FINISH_VISCHUNK(o0, f0, f2, g3) -41: FINISH_VISCHUNK(o0, f2, f4, g3) -42: FINISH_VISCHUNK(o0, f4, f6, g3) -43: FINISH_VISCHUNK(o0, f6, f8, g3) -44: FINISH_VISCHUNK(o0, f8, f10, g3) -45: FINISH_VISCHUNK(o0, f10, f12, g3) -46: FINISH_VISCHUNK(o0, f12, f14, g3) -47: UNEVEN_VISCHUNK(o0, f14, f0, g3) -48: FINISH_VISCHUNK(o0, f16, f18, g3) -49: FINISH_VISCHUNK(o0, f18, f20, g3) -50: FINISH_VISCHUNK(o0, f20, f22, g3) -51: FINISH_VISCHUNK(o0, f22, f24, g3) -52: FINISH_VISCHUNK(o0, f24, f26, g3) -53: FINISH_VISCHUNK(o0, f26, f28, g3) -54: FINISH_VISCHUNK(o0, f28, f30, g3) -55: UNEVEN_VISCHUNK(o0, f30, f0, g3) -56: FINISH_VISCHUNK(o0, f32, f34, g3) -57: FINISH_VISCHUNK(o0, f34, f36, g3) -58: FINISH_VISCHUNK(o0, f36, f38, g3) -59: FINISH_VISCHUNK(o0, f38, f40, g3) -60: FINISH_VISCHUNK(o0, f40, f42, g3) -61: FINISH_VISCHUNK(o0, f42, f44, g3) -62: FINISH_VISCHUNK(o0, f44, f46, g3) -63: UNEVEN_VISCHUNK_LAST(o0, f46, f0, g3) - -93: EX_LD_FP(LOAD(ldd, %o1, %f2)) +40: FINISH_VISCHUNK(o0, f0, f2) +41: FINISH_VISCHUNK(o0, f2, f4) +42: FINISH_VISCHUNK(o0, f4, f6) +43: FINISH_VISCHUNK(o0, f6, f8) +44: FINISH_VISCHUNK(o0, f8, f10) +45: FINISH_VISCHUNK(o0, f10, f12) +46: FINISH_VISCHUNK(o0, f12, f14) +47: UNEVEN_VISCHUNK(o0, f14, f0) +48: FINISH_VISCHUNK(o0, f16, f18) +49: FINISH_VISCHUNK(o0, f18, f20) +50: FINISH_VISCHUNK(o0, f20, f22) +51: FINISH_VISCHUNK(o0, f22, f24) +52: FINISH_VISCHUNK(o0, f24, f26) +53: FINISH_VISCHUNK(o0, f26, f28) +54: FINISH_VISCHUNK(o0, f28, f30) +55: UNEVEN_VISCHUNK(o0, f30, f0) +56: FINISH_VISCHUNK(o0, f32, f34) +57: FINISH_VISCHUNK(o0, f34, f36) +58: FINISH_VISCHUNK(o0, f36, f38) +59: FINISH_VISCHUNK(o0, f38, f40) +60: FINISH_VISCHUNK(o0, f40, f42) +61: FINISH_VISCHUNK(o0, f42, f44) +62: FINISH_VISCHUNK(o0, f44, f46) +63: UNEVEN_VISCHUNK_LAST(o0, f46, f0) + +93: EX_LD_FP(LOAD(ldd, %o1, %f2), U1_g3_0_fp) add %o1, 8, %o1 subcc %g3, 8, %g3 faligndata %f0, %f2, %f8 - EX_ST_FP(STORE(std, %f8, %o0)) + EX_ST_FP(STORE(std, %f8, %o0), U1_g3_8_fp) bl,pn %xcc, 95f add %o0, 8, %o0 - EX_LD_FP(LOAD(ldd, %o1, %f0)) + EX_LD_FP(LOAD(ldd, %o1, %f0), U1_g3_0_fp) add %o1, 8, %o1 subcc %g3, 8, %g3 faligndata %f2, %f0, %f8 - EX_ST_FP(STORE(std, %f8, %o0)) + EX_ST_FP(STORE(std, %f8, %o0), U1_g3_8_fp) bge,pt %xcc, 93b add %o0, 8, %o0 95: brz,pt %o2, 2f mov %g1, %o1 -1: EX_LD_FP(LOAD(ldub, %o1, %o3)) +1: EX_LD_FP(LOAD(ldub, %o1, %o3), U1_o2_0_fp) add %o1, 1, %o1 subcc %o2, 1, %o2 - EX_ST_FP(STORE(stb, %o3, %o0)) + EX_ST_FP(STORE(stb, %o3, %o0), U1_o2_1_fp) bne,pt %xcc, 1b add %o0, 1, %o0 @@ -470,27 +583,27 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 72: andn %o2, 0xf, %GLOBAL_SPARE and %o2, 0xf, %o2 -1: EX_LD(LOAD(ldx, %o1 + 0x00, %o5)) - EX_LD(LOAD(ldx, %o1 + 0x08, %g1)) +1: EX_LD(LOAD(ldx, %o1 + 0x00, %o5), U1_gs_0) + EX_LD(LOAD(ldx, %o1 + 0x08, %g1), U1_gs_0) subcc %GLOBAL_SPARE, 0x10, %GLOBAL_SPARE - EX_ST(STORE(stx, %o5, %o1 + %o3)) + EX_ST(STORE(stx, %o5, %o1 + %o3), U1_gs_10) add %o1, 0x8, %o1 - EX_ST(STORE(stx, %g1, %o1 + %o3)) + EX_ST(STORE(stx, %g1, %o1 + %o3), U1_gs_8) bgu,pt %XCC, 1b add %o1, 0x8, %o1 73: andcc %o2, 0x8, %g0 be,pt %XCC, 1f nop - EX_LD(LOAD(ldx, %o1, %o5)) + EX_LD(LOAD(ldx, %o1, %o5), U1_o2_0) sub %o2, 0x8, %o2 - EX_ST(STORE(stx, %o5, %o1 + %o3)) + EX_ST(STORE(stx, %o5, %o1 + %o3), U1_o2_8) add %o1, 0x8, %o1 1: andcc %o2, 0x4, %g0 be,pt %XCC, 1f nop - EX_LD(LOAD(lduw, %o1, %o5)) + EX_LD(LOAD(lduw, %o1, %o5), U1_o2_0) sub %o2, 0x4, %o2 - EX_ST(STORE(stw, %o5, %o1 + %o3)) + EX_ST(STORE(stw, %o5, %o1 + %o3), U1_o2_4) add %o1, 0x4, %o1 1: cmp %o2, 0 be,pt %XCC, 85f @@ -504,9 +617,9 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ sub %g0, %g1, %g1 sub %o2, %g1, %o2 -1: EX_LD(LOAD(ldub, %o1, %o5)) +1: EX_LD(LOAD(ldub, %o1, %o5), U1_g1_0) subcc %g1, 1, %g1 - EX_ST(STORE(stb, %o5, %o1 + %o3)) + EX_ST(STORE(stb, %o5, %o1 + %o3), U1_g1_1) bgu,pt %icc, 1b add %o1, 1, %o1 @@ -522,16 +635,16 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 8: mov 64, %o3 andn %o1, 0x7, %o1 - EX_LD(LOAD(ldx, %o1, %g2)) + EX_LD(LOAD(ldx, %o1, %g2), U1_o2_0) sub %o3, %g1, %o3 andn %o2, 0x7, %GLOBAL_SPARE sllx %g2, %g1, %g2 -1: EX_LD(LOAD(ldx, %o1 + 0x8, %g3)) +1: EX_LD(LOAD(ldx, %o1 + 0x8, %g3), U1_gs_0_o2_adj) subcc %GLOBAL_SPARE, 0x8, %GLOBAL_SPARE add %o1, 0x8, %o1 srlx %g3, %o3, %o5 or %o5, %g2, %o5 - EX_ST(STORE(stx, %o5, %o0)) + EX_ST(STORE(stx, %o5, %o0), U1_gs_8_o2_adj) add %o0, 0x8, %o0 bgu,pt %icc, 1b sllx %g3, %g1, %g2 @@ -549,9 +662,9 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ bne,pn %XCC, 90f sub %o0, %o1, %o3 -1: EX_LD(LOAD(lduw, %o1, %g1)) +1: EX_LD(LOAD(lduw, %o1, %g1), U1_o2_0) subcc %o2, 4, %o2 - EX_ST(STORE(stw, %g1, %o1 + %o3)) + EX_ST(STORE(stw, %g1, %o1 + %o3), U1_o2_4) bgu,pt %XCC, 1b add %o1, 4, %o1 @@ -559,9 +672,9 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ mov EX_RETVAL(%o4), %o0 .align 32 -90: EX_LD(LOAD(ldub, %o1, %g1)) +90: EX_LD(LOAD(ldub, %o1, %g1), U1_o2_0) subcc %o2, 1, %o2 - EX_ST(STORE(stb, %g1, %o1 + %o3)) + EX_ST(STORE(stb, %g1, %o1 + %o3), U1_o2_1) bgu,pt %XCC, 90b add %o1, 1, %o1 retl -- cgit From 0cc11a61b80a1ab1d12f1597b27b8b45ef8bac4a Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 20 Oct 2016 09:34:31 -0400 Subject: nfsd: move blocked lock handling under a dedicated spinlock Bruce was hitting some lockdep warnings in testing, showing that we could hit a deadlock with the new CB_NOTIFY_LOCK handling, involving a rather complex situation involving four different spinlocks. The crux of the matter is that we end up taking the nn->client_lock in the lm_notify handler. The simplest fix is to just declare a new per-nfsd_net spinlock to protect the new CB_NOTIFY_LOCK structures. Signed-off-by: Jeff Layton Signed-off-by: J. Bruce Fields --- fs/nfsd/netns.h | 5 +++++ fs/nfsd/nfs4state.c | 28 +++++++++++++++------------- 2 files changed, 20 insertions(+), 13 deletions(-) diff --git a/fs/nfsd/netns.h b/fs/nfsd/netns.h index b10d557f9c9e..ee36efd5aece 100644 --- a/fs/nfsd/netns.h +++ b/fs/nfsd/netns.h @@ -84,6 +84,8 @@ struct nfsd_net { struct list_head client_lru; struct list_head close_lru; struct list_head del_recall_lru; + + /* protected by blocked_locks_lock */ struct list_head blocked_locks_lru; struct delayed_work laundromat_work; @@ -91,6 +93,9 @@ struct nfsd_net { /* client_lock protects the client lru list and session hash table */ spinlock_t client_lock; + /* protects blocked_locks_lru */ + spinlock_t blocked_locks_lock; + struct file *rec_file; bool in_grace; const struct nfsd4_client_tracking_ops *client_tracking_ops; diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 9752beb78659..95474196a17e 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -217,7 +217,7 @@ find_blocked_lock(struct nfs4_lockowner *lo, struct knfsd_fh *fh, { struct nfsd4_blocked_lock *cur, *found = NULL; - spin_lock(&nn->client_lock); + spin_lock(&nn->blocked_locks_lock); list_for_each_entry(cur, &lo->lo_blocked, nbl_list) { if (fh_match(fh, &cur->nbl_fh)) { list_del_init(&cur->nbl_list); @@ -226,7 +226,7 @@ find_blocked_lock(struct nfs4_lockowner *lo, struct knfsd_fh *fh, break; } } - spin_unlock(&nn->client_lock); + spin_unlock(&nn->blocked_locks_lock); if (found) posix_unblock_lock(&found->nbl_lock); return found; @@ -4665,7 +4665,7 @@ nfs4_laundromat(struct nfsd_net *nn) * indefinitely once the lock does become free. */ BUG_ON(!list_empty(&reaplist)); - spin_lock(&nn->client_lock); + spin_lock(&nn->blocked_locks_lock); while (!list_empty(&nn->blocked_locks_lru)) { nbl = list_first_entry(&nn->blocked_locks_lru, struct nfsd4_blocked_lock, nbl_lru); @@ -4678,7 +4678,7 @@ nfs4_laundromat(struct nfsd_net *nn) list_move(&nbl->nbl_lru, &reaplist); list_del_init(&nbl->nbl_list); } - spin_unlock(&nn->client_lock); + spin_unlock(&nn->blocked_locks_lock); while (!list_empty(&reaplist)) { nbl = list_first_entry(&nn->blocked_locks_lru, @@ -5439,13 +5439,13 @@ nfsd4_lm_notify(struct file_lock *fl) bool queue = false; /* An empty list means that something else is going to be using it */ - spin_lock(&nn->client_lock); + spin_lock(&nn->blocked_locks_lock); if (!list_empty(&nbl->nbl_list)) { list_del_init(&nbl->nbl_list); list_del_init(&nbl->nbl_lru); queue = true; } - spin_unlock(&nn->client_lock); + spin_unlock(&nn->blocked_locks_lock); if (queue) nfsd4_run_cb(&nbl->nbl_cb); @@ -5868,10 +5868,10 @@ nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, if (fl_flags & FL_SLEEP) { nbl->nbl_time = jiffies; - spin_lock(&nn->client_lock); + spin_lock(&nn->blocked_locks_lock); list_add_tail(&nbl->nbl_list, &lock_sop->lo_blocked); list_add_tail(&nbl->nbl_lru, &nn->blocked_locks_lru); - spin_unlock(&nn->client_lock); + spin_unlock(&nn->blocked_locks_lock); } err = vfs_lock_file(filp, F_SETLK, file_lock, conflock); @@ -5900,10 +5900,10 @@ out: if (nbl) { /* dequeue it if we queued it before */ if (fl_flags & FL_SLEEP) { - spin_lock(&nn->client_lock); + spin_lock(&nn->blocked_locks_lock); list_del_init(&nbl->nbl_list); list_del_init(&nbl->nbl_lru); - spin_unlock(&nn->client_lock); + spin_unlock(&nn->blocked_locks_lock); } free_blocked_lock(nbl); } @@ -6943,9 +6943,11 @@ static int nfs4_state_create_net(struct net *net) INIT_LIST_HEAD(&nn->client_lru); INIT_LIST_HEAD(&nn->close_lru); INIT_LIST_HEAD(&nn->del_recall_lru); - INIT_LIST_HEAD(&nn->blocked_locks_lru); spin_lock_init(&nn->client_lock); + spin_lock_init(&nn->blocked_locks_lock); + INIT_LIST_HEAD(&nn->blocked_locks_lru); + INIT_DELAYED_WORK(&nn->laundromat_work, laundromat_main); get_net(net); @@ -7063,14 +7065,14 @@ nfs4_state_shutdown_net(struct net *net) } BUG_ON(!list_empty(&reaplist)); - spin_lock(&nn->client_lock); + spin_lock(&nn->blocked_locks_lock); while (!list_empty(&nn->blocked_locks_lru)) { nbl = list_first_entry(&nn->blocked_locks_lru, struct nfsd4_blocked_lock, nbl_lru); list_move(&nbl->nbl_lru, &reaplist); list_del_init(&nbl->nbl_list); } - spin_unlock(&nn->client_lock); + spin_unlock(&nn->blocked_locks_lock); while (!list_empty(&reaplist)) { nbl = list_first_entry(&nn->blocked_locks_lru, -- cgit From e8d7515a983b5ccf6681db0ade3714e837581a97 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 21 Oct 2016 16:16:07 -0400 Subject: drm/amdgpu: cancel reset work on fini MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cancel any pending reset work when we tear down the driver. Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c index 278708f5a744..9fa809876339 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c @@ -239,6 +239,7 @@ int amdgpu_irq_init(struct amdgpu_device *adev) if (r) { adev->irq.installed = false; flush_work(&adev->hotplug_work); + cancel_work_sync(&adev->reset_work); return r; } @@ -264,6 +265,7 @@ void amdgpu_irq_fini(struct amdgpu_device *adev) if (adev->irq.msi_enabled) pci_disable_msi(adev->pdev); flush_work(&adev->hotplug_work); + cancel_work_sync(&adev->reset_work); } for (i = 0; i < AMDGPU_MAX_IRQ_SRC_ID; ++i) { -- cgit From 4560738a8e9d5c0a053b8b896487b83e6948f4a1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 21 Oct 2016 16:30:10 -0400 Subject: drm/amdgpu/dpm: flush any thermal work on fini MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Flush any outstanding thermal work before tearing down the dpm driver. Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/ci_dpm.c | 2 ++ drivers/gpu/drm/amd/amdgpu/kv_dpm.c | 2 ++ drivers/gpu/drm/amd/amdgpu/si_dpm.c | 2 ++ 3 files changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c index 1d8c375a3561..29e6061b9087 100644 --- a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c @@ -6236,6 +6236,8 @@ static int ci_dpm_sw_fini(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + flush_work(&adev->pm.dpm.thermal.work); + mutex_lock(&adev->pm.mutex); amdgpu_pm_sysfs_fini(adev); ci_dpm_fini(adev); diff --git a/drivers/gpu/drm/amd/amdgpu/kv_dpm.c b/drivers/gpu/drm/amd/amdgpu/kv_dpm.c index f8618a3881a8..71d2856222fa 100644 --- a/drivers/gpu/drm/amd/amdgpu/kv_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/kv_dpm.c @@ -3063,6 +3063,8 @@ static int kv_dpm_sw_fini(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + flush_work(&adev->pm.dpm.thermal.work); + mutex_lock(&adev->pm.mutex); amdgpu_pm_sysfs_fini(adev); kv_dpm_fini(adev); diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c index 3de7bca5854b..ee77e9cb55b1 100644 --- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c @@ -7777,6 +7777,8 @@ static int si_dpm_sw_fini(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + flush_work(&adev->pm.dpm.thermal.work); + mutex_lock(&adev->pm.mutex); amdgpu_pm_sysfs_fini(adev); si_dpm_fini(adev); -- cgit From 9dc79965b21967caebde575f5f5d8bf1aa2c23ab Mon Sep 17 00:00:00 2001 From: Michel Dänzer Date: Mon, 24 Oct 2016 16:52:20 +0900 Subject: Revert "drm/radeon: fix DP link training issue with second 4K monitor" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 1a738347df2ee4977459a8776fe2c62196bdcb1b. It caused at least some Kaveri laptops to incorrectly report DisplayPort connectors as connected. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97857 Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_dp_auxch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_dp_auxch.c b/drivers/gpu/drm/radeon/radeon_dp_auxch.c index 2d465648856a..474a8a1886f7 100644 --- a/drivers/gpu/drm/radeon/radeon_dp_auxch.c +++ b/drivers/gpu/drm/radeon/radeon_dp_auxch.c @@ -105,7 +105,7 @@ radeon_dp_aux_transfer_native(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg tmp &= AUX_HPD_SEL(0x7); tmp |= AUX_HPD_SEL(chan->rec.hpd); - tmp |= AUX_EN | AUX_LS_READ_EN | AUX_HPD_DISCON(0x1); + tmp |= AUX_EN | AUX_LS_READ_EN; WREG32(AUX_CONTROL + aux_offset[instance], tmp); -- cgit From a053fb7e512c77f0742bceb578b10025256e1911 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 23 Oct 2016 21:31:44 +0300 Subject: drm/amdgpu: fix sched fence slab teardown MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To free fences, call_rcu() is used, which calls amd_sched_fence_free() after a grace period. During teardown, there is no guarantee all callbacks have finished, so sched_fence_slab may be destroyed before all fences have been freed. If we are lucky, this results in some slab warnings, if not, we get a crash in one of rcu threads because callback is called after amdgpu has already been unloaded. Fix it with a rcu_barrier(). Fixes: 189e0fb76304 ("drm/amdgpu: RCU protected amd_sched_fence_release") Acked-by: Chunming Zhou Reviewed-by: Christian König Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/scheduler/gpu_scheduler.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c index 963a24d46a93..910b8d5b21c5 100644 --- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c +++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c @@ -645,6 +645,7 @@ void amd_sched_fini(struct amd_gpu_scheduler *sched) { if (sched->thread) kthread_stop(sched->thread); + rcu_barrier(); if (atomic_dec_and_test(&sched_fence_slab_ref)) kmem_cache_destroy(sched_fence_slab); } -- cgit From 2d7c17be00e0dce3bc1a092a2c277a9f86c69ca9 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 23 Oct 2016 21:31:45 +0300 Subject: drm/amdgpu: fix a vm_flush fence leak MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Looks like .last_flush reference is left at teardown. Leak reported by CONFIG_SLUB_DEBUG. Fixes: 41d9eb2c5a2a ("drm/amdgpu: add a fence after the VM flush") Reviewed-by: Chunming Zhou Reviewed-by: Christian König Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 06f24322e7c3..968c4260d7a7 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -1758,5 +1758,6 @@ void amdgpu_vm_manager_fini(struct amdgpu_device *adev) fence_put(adev->vm_manager.ids[i].first); amdgpu_sync_free(&adev->vm_manager.ids[i].active); fence_put(id->flushed_updates); + fence_put(id->last_flush); } } -- cgit From 9566213359aa75851a9ca7fea613652fb5fcb081 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 23 Oct 2016 21:31:47 +0300 Subject: drm/amdgpu: update kernel-doc for some functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The names were wrong. Reviewed-by: Edward O'Callaghan Reviewed-by: Christian König Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/scheduler/sched_fence.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/scheduler/sched_fence.c b/drivers/gpu/drm/amd/scheduler/sched_fence.c index 6b63beaf7574..3653b5a40494 100644 --- a/drivers/gpu/drm/amd/scheduler/sched_fence.c +++ b/drivers/gpu/drm/amd/scheduler/sched_fence.c @@ -103,7 +103,7 @@ static void amd_sched_fence_free(struct rcu_head *rcu) } /** - * amd_sched_fence_release - callback that fence can be freed + * amd_sched_fence_release_scheduled - callback that fence can be freed * * @fence: fence * @@ -118,7 +118,7 @@ static void amd_sched_fence_release_scheduled(struct fence *f) } /** - * amd_sched_fence_release_scheduled - drop extra reference + * amd_sched_fence_release_finished - drop extra reference * * @f: fence * -- cgit From 0f10425e811355986907c54f7d1d06703e406092 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 23 Oct 2016 21:31:43 +0300 Subject: drm/amdgpu: fix fence slab teardown MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To free fences, call_rcu() is used, which calls amdgpu_fence_free() after a grace period. During teardown, there is no guarantee all callbacks have finished, so amdgpu_fence_slab may be destroyed before all fences have been freed. If we are lucky, this results in some slab warnings, if not, we get a crash in one of rcu threads because callback is called after amdgpu has already been unloaded. Fix it with a rcu_barrier(). Fixes: b44135351a3a ("drm/amdgpu: RCU protected amdgpu_fence_release") Acked-by: Chunming Zhou Reviewed-by: Christian König Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c index 3a2e42f4b897..77b34ec92632 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c @@ -68,6 +68,7 @@ int amdgpu_fence_slab_init(void) void amdgpu_fence_slab_fini(void) { + rcu_barrier(); kmem_cache_destroy(amdgpu_fence_slab); } /* -- cgit From e3f948cd3283e4fbe5907f1f3967c839912f480e Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 6 Oct 2016 14:09:16 -0700 Subject: RAID1: ignore discard error If a write error occurs, raid1 will try to rewrite the bio in small chunk size. If the rewrite fails, raid1 will record the error in bad block. narrow_write_error will always use WRITE for the bio, but actually it could be a discard. Since discard bio hasn't payload, write the bio will cause different issues. But discard error isn't fatal, we can safely ignore it. This is what this patch does. This issue should exist since discard is added, but only exposed with recent arbitrary bio size feature. Reported-and-tested-by: Sitsofe Wheeler Cc: stable@vger.kernel.org (v3.6) Signed-off-by: Shaohua Li --- drivers/md/raid1.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 1961d827dbd1..db536a68b2ee 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -403,11 +403,14 @@ static void raid1_end_write_request(struct bio *bio) struct bio *to_put = NULL; int mirror = find_bio_disk(r1_bio, bio); struct md_rdev *rdev = conf->mirrors[mirror].rdev; + bool discard_error; + + discard_error = bio->bi_error && bio_op(bio) == REQ_OP_DISCARD; /* * 'one mirror IO has finished' event handler: */ - if (bio->bi_error) { + if (bio->bi_error && !discard_error) { set_bit(WriteErrorSeen, &rdev->flags); if (!test_and_set_bit(WantReplacement, &rdev->flags)) set_bit(MD_RECOVERY_NEEDED, & @@ -444,7 +447,7 @@ static void raid1_end_write_request(struct bio *bio) /* Maybe we can clear some bad blocks. */ if (is_badblock(rdev, r1_bio->sector, r1_bio->sectors, - &first_bad, &bad_sectors)) { + &first_bad, &bad_sectors) && !discard_error) { r1_bio->bios[mirror] = IO_MADE_GOOD; set_bit(R1BIO_MadeGood, &r1_bio->state); } -- cgit From 579ed34f7b751b8add233cba4cf755258dbdd60a Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 6 Oct 2016 14:13:52 -0700 Subject: RAID10: ignore discard error This is the counterpart of raid10 fix. If a write error occurs, raid10 will try to rewrite the bio in small chunk size. If the rewrite fails, raid10 will record the error in bad block. narrow_write_error will always use WRITE for the bio, but actually it could be a discard. Since discard bio hasn't payload, write the bio will cause different issues. But discard error isn't fatal, we can safely ignore it. This is what this patch does. This issue should exist since discard is added, but only exposed with recent arbitrary bio size feature. Cc: Sitsofe Wheeler Cc: stable@vger.kernel.org (v3.6) Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index be1a9fca3b2d..39fddda2fef2 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -447,6 +447,9 @@ static void raid10_end_write_request(struct bio *bio) struct r10conf *conf = r10_bio->mddev->private; int slot, repl; struct md_rdev *rdev = NULL; + bool discard_error; + + discard_error = bio->bi_error && bio_op(bio) == REQ_OP_DISCARD; dev = find_bio_disk(conf, r10_bio, bio, &slot, &repl); @@ -460,7 +463,7 @@ static void raid10_end_write_request(struct bio *bio) /* * this branch is our 'one mirror IO has finished' event handler: */ - if (bio->bi_error) { + if (bio->bi_error && !discard_error) { if (repl) /* Never record new bad blocks to replacement, * just fail it. @@ -503,7 +506,7 @@ static void raid10_end_write_request(struct bio *bio) if (is_badblock(rdev, r10_bio->devs[slot].addr, r10_bio->sectors, - &first_bad, &bad_sectors)) { + &first_bad, &bad_sectors) && !discard_error) { bio_put(bio); if (repl) r10_bio->devs[slot].repl_bio = IO_MADE_GOOD; -- cgit From 28cd88e2b4c54a466dcae7eea1efac766d42386b Mon Sep 17 00:00:00 2001 From: Zhengyuan Liu Date: Mon, 24 Oct 2016 09:55:20 +0800 Subject: md/raid5: initialize next_checkpoint field before use No initial operation was done to this field when we load/recovery the log, it got assignment only when IO to raid disk was finished. So r5l_quiesce may use wrong next_checkpoint to reclaim log space, that would make reclaimable space calculation confused. Signed-off-by: Zhengyuan Liu Signed-off-by: Shaohua Li --- drivers/md/raid5-cache.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c index 1b1ab4a1d132..998ea0025dd0 100644 --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -1096,6 +1096,8 @@ static int r5l_recovery_log(struct r5l_log *log) log->seq = ctx.seq + 11; log->log_start = r5l_ring_add(log, ctx.pos, BLOCK_SECTORS); r5l_write_super(log, ctx.pos); + log->last_checkpoint = ctx.pos; + log->next_checkpoint = ctx.pos; } else { log->log_start = ctx.pos; log->seq = ctx.seq; @@ -1168,6 +1170,7 @@ create: if (log->max_free_space > RECLAIM_MAX_FREE_SPACE) log->max_free_space = RECLAIM_MAX_FREE_SPACE; log->last_checkpoint = cp; + log->next_checkpoint = cp; __free_page(page); -- cgit From 56056c2e7d58ee705755efbe780aefff987a1dc8 Mon Sep 17 00:00:00 2001 From: Zhengyuan Liu Date: Mon, 24 Oct 2016 16:15:59 +0800 Subject: md/raid5: write an empty meta-block when creating log super-block If superblock points to an invalid meta block, r5l_load_log will set create_super with true and create an new superblock, this runtime path would always happen if we do no writing I/O to this array since it was created. Writing an empty meta block could avoid this unnecessary action at the first time we created log superblock. Another reason is for the corretness of log recovery. Currently we have bellow code to guarantee log revocery to be correct. if (ctx.seq > log->last_cp_seq + 1) { int ret; ret = r5l_log_write_empty_meta_block(log, ctx.pos, ctx.seq + 10); if (ret) return ret; log->seq = ctx.seq + 11; log->log_start = r5l_ring_add(log, ctx.pos, BLOCK_SECTORS); r5l_write_super(log, ctx.pos); } else { log->log_start = ctx.pos; log->seq = ctx.seq; } If we just created a array with a journal device, log->log_start and log->last_checkpoint should all be 0, then we write three meta block which are valid except mid one and supposed crash happened. The ctx.seq would equal to log->last_cp_seq + 1 and log->log_start would be set to position of mid invalid meta block after we did a recovery, this will lead to problems which could be avoided with this patch. Signed-off-by: Zhengyuan Liu Signed-off-by: Shaohua Li --- drivers/md/raid5-cache.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c index 998ea0025dd0..981f85515191 100644 --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -1156,6 +1156,7 @@ create: if (create_super) { log->last_cp_seq = prandom_u32(); cp = 0; + r5l_log_write_empty_meta_block(log, cp, log->last_cp_seq); /* * Make sure super points to correct address. Log might have * data very soon. If super hasn't correct log tail address, -- cgit From 16f889499a5214ebe038f8bd00f4c0094ed0ed75 Mon Sep 17 00:00:00 2001 From: Tomasz Majchrzak Date: Mon, 24 Oct 2016 12:47:28 +0200 Subject: md: report 'write_pending' state when array in sync If there is a bad block on a disk and there is a recovery performed from this disk, the same bad block is reported for a new disk. It involves setting MD_CHANGE_PENDING flag in rdev_set_badblocks. For external metadata this flag is not being cleared as array state is reported as 'clean'. The read request to bad block in RAID5 array gets stuck as it is waiting for a flag to be cleared - as per commit c3cce6cda162 ("md/raid5: ensure device failure recorded before write request returns."). The meaning of MD_CHANGE_PENDING and MD_CHANGE_CLEAN flags has been clarified in commit 070dc6dd7103 ("md: resolve confusion of MD_CHANGE_CLEAN"), however MD_CHANGE_PENDING flag has been used in personality error handlers since and it doesn't fully comply with initial purpose. It was supposed to notify that write request is about to start, however now it is also used to request metadata update. Initially (in md_allow_write, md_write_start) MD_CHANGE_PENDING flag has been set and in_sync has been set to 0 at the same time. Error handlers just set the flag without modifying in_sync value. Sysfs array state is a single value so now it reports 'clean' when MD_CHANGE_PENDING flag is set and in_sync is set to 1. Userspace has no idea it is expected to take some action. Swap the order that array state is checked so 'write_pending' is reported ahead of 'clean' ('write_pending' is a misleading name but it is too late to rename it now). Signed-off-by: Tomasz Majchrzak Signed-off-by: Shaohua Li --- drivers/md/md.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index eac84d8ff724..25b57a55db1a 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3887,10 +3887,10 @@ array_state_show(struct mddev *mddev, char *page) st = read_auto; break; case 0: - if (mddev->in_sync) - st = clean; - else if (test_bit(MD_CHANGE_PENDING, &mddev->flags)) + if (test_bit(MD_CHANGE_PENDING, &mddev->flags)) st = write_pending; + else if (mddev->in_sync) + st = clean; else if (mddev->safemode) st = active_idle; else -- cgit From 324ae0958cab5ccdf2851ef0348ba1cb8ad4e34a Mon Sep 17 00:00:00 2001 From: Dmitry Tunin Date: Mon, 24 Oct 2016 16:35:09 -0700 Subject: Input: psmouse - cleanup Focaltech code psmouse->name "Focaltech Touchpad" is an overkill. In xinput it is too long as "FocaltechPS/2 Focaltech Focaltech Touchpad" In focaltech_report_state() pointer to psmouse->dev is already stored as *dev Signed-off-by: Dmitry Tunin Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/focaltech.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/input/mouse/focaltech.c b/drivers/input/mouse/focaltech.c index 54eceb30ede5..a7d39689bbfb 100644 --- a/drivers/input/mouse/focaltech.c +++ b/drivers/input/mouse/focaltech.c @@ -43,7 +43,7 @@ int focaltech_detect(struct psmouse *psmouse, bool set_properties) if (set_properties) { psmouse->vendor = "FocalTech"; - psmouse->name = "FocalTech Touchpad"; + psmouse->name = "Touchpad"; } return 0; @@ -146,8 +146,8 @@ static void focaltech_report_state(struct psmouse *psmouse) } input_mt_report_pointer_emulation(dev, true); - input_report_key(psmouse->dev, BTN_LEFT, state->pressed); - input_sync(psmouse->dev); + input_report_key(dev, BTN_LEFT, state->pressed); + input_sync(dev); } static void focaltech_process_touch_packet(struct psmouse *psmouse, -- cgit From 1e793f6fc0db920400574211c48f9157a37e3945 Mon Sep 17 00:00:00 2001 From: Kashyap Desai Date: Fri, 21 Oct 2016 06:33:32 -0700 Subject: scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices Commit 02b01e010afe ("megaraid_sas: return sync cache call with success") modified the driver to successfully complete SYNCHRONIZE_CACHE commands without passing them to the controller. Disk drive caches are only explicitly managed by controller firmware when operating in RAID mode. So this commit effectively disabled writeback cache flushing for any drives used in JBOD mode, leading to data integrity failures. [mkp: clarified patch description] Fixes: 02b01e010afeeb49328d35650d70721d2ca3fd59 CC: stable@vger.kernel.org Signed-off-by: Kashyap Desai Signed-off-by: Sumit Saxena Reviewed-by: Tomas Henzl Reviewed-by: Hannes Reinecke Reviewed-by: Ewan D. Milne Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas_base.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 9ff57dee72d7..d8b1fbd4c8aa 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -1700,16 +1700,13 @@ megasas_queue_command(struct Scsi_Host *shost, struct scsi_cmnd *scmd) goto out_done; } - switch (scmd->cmnd[0]) { - case SYNCHRONIZE_CACHE: - /* - * FW takes care of flush cache on its own - * No need to send it down - */ + /* + * FW takes care of flush cache on its own for Virtual Disk. + * No need to send it down for VD. For JBOD send SYNCHRONIZE_CACHE to FW. + */ + if ((scmd->cmnd[0] == SYNCHRONIZE_CACHE) && MEGASAS_IS_LOGICAL(scmd)) { scmd->result = DID_OK << 16; goto out_done; - default: - break; } return instance->instancet->build_and_issue_cmd(instance, scmd); -- cgit From 95707704800988093a9b9a27e0f2f67f5b4bf2fa Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 24 Oct 2016 18:58:05 -0700 Subject: sparc64: Convert NG4copy_{from,to}_user to accurate exception reporting. Report the exact number of bytes which have not been successfully copied when an exception occurs, using the running remaining length. Signed-off-by: David S. Miller --- arch/sparc/lib/NG4copy_from_user.S | 8 +- arch/sparc/lib/NG4copy_to_user.S | 8 +- arch/sparc/lib/NG4memcpy.S | 294 ++++++++++++++++++++++++++++--------- 3 files changed, 231 insertions(+), 79 deletions(-) diff --git a/arch/sparc/lib/NG4copy_from_user.S b/arch/sparc/lib/NG4copy_from_user.S index f9746e7cf25e..16a286c1a528 100644 --- a/arch/sparc/lib/NG4copy_from_user.S +++ b/arch/sparc/lib/NG4copy_from_user.S @@ -3,19 +3,19 @@ * Copyright (C) 2012 David S. Miller (davem@davemloft.net) */ -#define EX_LD(x) \ +#define EX_LD(x, y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone_asi;\ + .word 98b, y; \ .text; \ .align 4; -#define EX_LD_FP(x) \ +#define EX_LD_FP(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone_asi_fp;\ + .word 98b, y##_fp; \ .text; \ .align 4; diff --git a/arch/sparc/lib/NG4copy_to_user.S b/arch/sparc/lib/NG4copy_to_user.S index 5fa44349adde..6b0276ffc858 100644 --- a/arch/sparc/lib/NG4copy_to_user.S +++ b/arch/sparc/lib/NG4copy_to_user.S @@ -3,19 +3,19 @@ * Copyright (C) 2012 David S. Miller (davem@davemloft.net) */ -#define EX_ST(x) \ +#define EX_ST(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone_asi;\ + .word 98b, y; \ .text; \ .align 4; -#define EX_ST_FP(x) \ +#define EX_ST_FP(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone_asi_fp;\ + .word 98b, y##_fp; \ .text; \ .align 4; diff --git a/arch/sparc/lib/NG4memcpy.S b/arch/sparc/lib/NG4memcpy.S index 8e13ee1f4454..75bb93b1437f 100644 --- a/arch/sparc/lib/NG4memcpy.S +++ b/arch/sparc/lib/NG4memcpy.S @@ -4,6 +4,7 @@ */ #ifdef __KERNEL__ +#include #include #include #define GLOBAL_SPARE %g7 @@ -46,22 +47,19 @@ #endif #ifndef EX_LD -#define EX_LD(x) x +#define EX_LD(x,y) x #endif #ifndef EX_LD_FP -#define EX_LD_FP(x) x +#define EX_LD_FP(x,y) x #endif #ifndef EX_ST -#define EX_ST(x) x +#define EX_ST(x,y) x #endif #ifndef EX_ST_FP -#define EX_ST_FP(x) x +#define EX_ST_FP(x,y) x #endif -#ifndef EX_RETVAL -#define EX_RETVAL(x) x -#endif #ifndef LOAD #define LOAD(type,addr,dest) type [addr], dest @@ -94,6 +92,158 @@ .register %g3,#scratch .text +#ifndef EX_RETVAL +#define EX_RETVAL(x) x +__restore_asi_fp: + VISExitHalf +__restore_asi: + retl + wr %g0, ASI_AIUS, %asi + +ENTRY(NG4_retl_o2) + ba,pt %xcc, __restore_asi + mov %o2, %o0 +ENDPROC(NG4_retl_o2) +ENTRY(NG4_retl_o2_plus_1) + ba,pt %xcc, __restore_asi + add %o2, 1, %o0 +ENDPROC(NG4_retl_o2_plus_1) +ENTRY(NG4_retl_o2_plus_4) + ba,pt %xcc, __restore_asi + add %o2, 4, %o0 +ENDPROC(NG4_retl_o2_plus_4) +ENTRY(NG4_retl_o2_plus_o5) + ba,pt %xcc, __restore_asi + add %o2, %o5, %o0 +ENDPROC(NG4_retl_o2_plus_o5) +ENTRY(NG4_retl_o2_plus_o5_plus_4) + add %o5, 4, %o5 + ba,pt %xcc, __restore_asi + add %o2, %o5, %o0 +ENDPROC(NG4_retl_o2_plus_o5_plus_4) +ENTRY(NG4_retl_o2_plus_o5_plus_8) + add %o5, 8, %o5 + ba,pt %xcc, __restore_asi + add %o2, %o5, %o0 +ENDPROC(NG4_retl_o2_plus_o5_plus_8) +ENTRY(NG4_retl_o2_plus_o5_plus_16) + add %o5, 16, %o5 + ba,pt %xcc, __restore_asi + add %o2, %o5, %o0 +ENDPROC(NG4_retl_o2_plus_o5_plus_16) +ENTRY(NG4_retl_o2_plus_o5_plus_24) + add %o5, 24, %o5 + ba,pt %xcc, __restore_asi + add %o2, %o5, %o0 +ENDPROC(NG4_retl_o2_plus_o5_plus_24) +ENTRY(NG4_retl_o2_plus_o5_plus_32) + add %o5, 32, %o5 + ba,pt %xcc, __restore_asi + add %o2, %o5, %o0 +ENDPROC(NG4_retl_o2_plus_o5_plus_32) +ENTRY(NG4_retl_o2_plus_g1) + ba,pt %xcc, __restore_asi + add %o2, %g1, %o0 +ENDPROC(NG4_retl_o2_plus_g1) +ENTRY(NG4_retl_o2_plus_g1_plus_1) + add %g1, 1, %g1 + ba,pt %xcc, __restore_asi + add %o2, %g1, %o0 +ENDPROC(NG4_retl_o2_plus_g1_plus_1) +ENTRY(NG4_retl_o2_plus_g1_plus_8) + add %g1, 8, %g1 + ba,pt %xcc, __restore_asi + add %o2, %g1, %o0 +ENDPROC(NG4_retl_o2_plus_g1_plus_8) +ENTRY(NG4_retl_o2_plus_o4) + ba,pt %xcc, __restore_asi + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4) +ENTRY(NG4_retl_o2_plus_o4_plus_8) + add %o4, 8, %o4 + ba,pt %xcc, __restore_asi + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_8) +ENTRY(NG4_retl_o2_plus_o4_plus_16) + add %o4, 16, %o4 + ba,pt %xcc, __restore_asi + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_16) +ENTRY(NG4_retl_o2_plus_o4_plus_24) + add %o4, 24, %o4 + ba,pt %xcc, __restore_asi + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_24) +ENTRY(NG4_retl_o2_plus_o4_plus_32) + add %o4, 32, %o4 + ba,pt %xcc, __restore_asi + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_32) +ENTRY(NG4_retl_o2_plus_o4_plus_40) + add %o4, 40, %o4 + ba,pt %xcc, __restore_asi + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_40) +ENTRY(NG4_retl_o2_plus_o4_plus_48) + add %o4, 48, %o4 + ba,pt %xcc, __restore_asi + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_48) +ENTRY(NG4_retl_o2_plus_o4_plus_56) + add %o4, 56, %o4 + ba,pt %xcc, __restore_asi + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_56) +ENTRY(NG4_retl_o2_plus_o4_plus_64) + add %o4, 64, %o4 + ba,pt %xcc, __restore_asi + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_64) +ENTRY(NG4_retl_o2_plus_o4_fp) + ba,pt %xcc, __restore_asi_fp + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_fp) +ENTRY(NG4_retl_o2_plus_o4_plus_8_fp) + add %o4, 8, %o4 + ba,pt %xcc, __restore_asi_fp + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_8_fp) +ENTRY(NG4_retl_o2_plus_o4_plus_16_fp) + add %o4, 16, %o4 + ba,pt %xcc, __restore_asi_fp + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_16_fp) +ENTRY(NG4_retl_o2_plus_o4_plus_24_fp) + add %o4, 24, %o4 + ba,pt %xcc, __restore_asi_fp + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_24_fp) +ENTRY(NG4_retl_o2_plus_o4_plus_32_fp) + add %o4, 32, %o4 + ba,pt %xcc, __restore_asi_fp + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_32_fp) +ENTRY(NG4_retl_o2_plus_o4_plus_40_fp) + add %o4, 40, %o4 + ba,pt %xcc, __restore_asi_fp + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_40_fp) +ENTRY(NG4_retl_o2_plus_o4_plus_48_fp) + add %o4, 48, %o4 + ba,pt %xcc, __restore_asi_fp + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_48_fp) +ENTRY(NG4_retl_o2_plus_o4_plus_56_fp) + add %o4, 56, %o4 + ba,pt %xcc, __restore_asi_fp + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_56_fp) +ENTRY(NG4_retl_o2_plus_o4_plus_64_fp) + add %o4, 64, %o4 + ba,pt %xcc, __restore_asi_fp + add %o2, %o4, %o0 +ENDPROC(NG4_retl_o2_plus_o4_plus_64_fp) +#endif .align 64 .globl FUNC_NAME @@ -124,12 +274,13 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ brz,pt %g1, 51f sub %o2, %g1, %o2 -1: EX_LD(LOAD(ldub, %o1 + 0x00, %g2)) + +1: EX_LD(LOAD(ldub, %o1 + 0x00, %g2), NG4_retl_o2_plus_g1) add %o1, 1, %o1 subcc %g1, 1, %g1 add %o0, 1, %o0 bne,pt %icc, 1b - EX_ST(STORE(stb, %g2, %o0 - 0x01)) + EX_ST(STORE(stb, %g2, %o0 - 0x01), NG4_retl_o2_plus_g1_plus_1) 51: LOAD(prefetch, %o1 + 0x040, #n_reads_strong) LOAD(prefetch, %o1 + 0x080, #n_reads_strong) @@ -154,43 +305,43 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ brz,pt %g1, .Llarge_aligned sub %o2, %g1, %o2 -1: EX_LD(LOAD(ldx, %o1 + 0x00, %g2)) +1: EX_LD(LOAD(ldx, %o1 + 0x00, %g2), NG4_retl_o2_plus_g1) add %o1, 8, %o1 subcc %g1, 8, %g1 add %o0, 8, %o0 bne,pt %icc, 1b - EX_ST(STORE(stx, %g2, %o0 - 0x08)) + EX_ST(STORE(stx, %g2, %o0 - 0x08), NG4_retl_o2_plus_g1_plus_8) .Llarge_aligned: /* len >= 0x80 && src 8-byte aligned && dest 8-byte aligned */ andn %o2, 0x3f, %o4 sub %o2, %o4, %o2 -1: EX_LD(LOAD(ldx, %o1 + 0x00, %g1)) +1: EX_LD(LOAD(ldx, %o1 + 0x00, %g1), NG4_retl_o2_plus_o4) add %o1, 0x40, %o1 - EX_LD(LOAD(ldx, %o1 - 0x38, %g2)) + EX_LD(LOAD(ldx, %o1 - 0x38, %g2), NG4_retl_o2_plus_o4) subcc %o4, 0x40, %o4 - EX_LD(LOAD(ldx, %o1 - 0x30, %g3)) - EX_LD(LOAD(ldx, %o1 - 0x28, GLOBAL_SPARE)) - EX_LD(LOAD(ldx, %o1 - 0x20, %o5)) - EX_ST(STORE_INIT(%g1, %o0)) + EX_LD(LOAD(ldx, %o1 - 0x30, %g3), NG4_retl_o2_plus_o4_plus_64) + EX_LD(LOAD(ldx, %o1 - 0x28, GLOBAL_SPARE), NG4_retl_o2_plus_o4_plus_64) + EX_LD(LOAD(ldx, %o1 - 0x20, %o5), NG4_retl_o2_plus_o4_plus_64) + EX_ST(STORE_INIT(%g1, %o0), NG4_retl_o2_plus_o4_plus_64) add %o0, 0x08, %o0 - EX_ST(STORE_INIT(%g2, %o0)) + EX_ST(STORE_INIT(%g2, %o0), NG4_retl_o2_plus_o4_plus_56) add %o0, 0x08, %o0 - EX_LD(LOAD(ldx, %o1 - 0x18, %g2)) - EX_ST(STORE_INIT(%g3, %o0)) + EX_LD(LOAD(ldx, %o1 - 0x18, %g2), NG4_retl_o2_plus_o4_plus_48) + EX_ST(STORE_INIT(%g3, %o0), NG4_retl_o2_plus_o4_plus_48) add %o0, 0x08, %o0 - EX_LD(LOAD(ldx, %o1 - 0x10, %g3)) - EX_ST(STORE_INIT(GLOBAL_SPARE, %o0)) + EX_LD(LOAD(ldx, %o1 - 0x10, %g3), NG4_retl_o2_plus_o4_plus_40) + EX_ST(STORE_INIT(GLOBAL_SPARE, %o0), NG4_retl_o2_plus_o4_plus_40) add %o0, 0x08, %o0 - EX_LD(LOAD(ldx, %o1 - 0x08, GLOBAL_SPARE)) - EX_ST(STORE_INIT(%o5, %o0)) + EX_LD(LOAD(ldx, %o1 - 0x08, GLOBAL_SPARE), NG4_retl_o2_plus_o4_plus_32) + EX_ST(STORE_INIT(%o5, %o0), NG4_retl_o2_plus_o4_plus_32) add %o0, 0x08, %o0 - EX_ST(STORE_INIT(%g2, %o0)) + EX_ST(STORE_INIT(%g2, %o0), NG4_retl_o2_plus_o4_plus_24) add %o0, 0x08, %o0 - EX_ST(STORE_INIT(%g3, %o0)) + EX_ST(STORE_INIT(%g3, %o0), NG4_retl_o2_plus_o4_plus_16) add %o0, 0x08, %o0 - EX_ST(STORE_INIT(GLOBAL_SPARE, %o0)) + EX_ST(STORE_INIT(GLOBAL_SPARE, %o0), NG4_retl_o2_plus_o4_plus_8) add %o0, 0x08, %o0 bne,pt %icc, 1b LOAD(prefetch, %o1 + 0x200, #n_reads_strong) @@ -216,17 +367,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ sub %o2, %o4, %o2 alignaddr %o1, %g0, %g1 add %o1, %o4, %o1 - EX_LD_FP(LOAD(ldd, %g1 + 0x00, %f0)) -1: EX_LD_FP(LOAD(ldd, %g1 + 0x08, %f2)) + EX_LD_FP(LOAD(ldd, %g1 + 0x00, %f0), NG4_retl_o2_plus_o4) +1: EX_LD_FP(LOAD(ldd, %g1 + 0x08, %f2), NG4_retl_o2_plus_o4) subcc %o4, 0x40, %o4 - EX_LD_FP(LOAD(ldd, %g1 + 0x10, %f4)) - EX_LD_FP(LOAD(ldd, %g1 + 0x18, %f6)) - EX_LD_FP(LOAD(ldd, %g1 + 0x20, %f8)) - EX_LD_FP(LOAD(ldd, %g1 + 0x28, %f10)) - EX_LD_FP(LOAD(ldd, %g1 + 0x30, %f12)) - EX_LD_FP(LOAD(ldd, %g1 + 0x38, %f14)) + EX_LD_FP(LOAD(ldd, %g1 + 0x10, %f4), NG4_retl_o2_plus_o4_plus_64) + EX_LD_FP(LOAD(ldd, %g1 + 0x18, %f6), NG4_retl_o2_plus_o4_plus_64) + EX_LD_FP(LOAD(ldd, %g1 + 0x20, %f8), NG4_retl_o2_plus_o4_plus_64) + EX_LD_FP(LOAD(ldd, %g1 + 0x28, %f10), NG4_retl_o2_plus_o4_plus_64) + EX_LD_FP(LOAD(ldd, %g1 + 0x30, %f12), NG4_retl_o2_plus_o4_plus_64) + EX_LD_FP(LOAD(ldd, %g1 + 0x38, %f14), NG4_retl_o2_plus_o4_plus_64) faligndata %f0, %f2, %f16 - EX_LD_FP(LOAD(ldd, %g1 + 0x40, %f0)) + EX_LD_FP(LOAD(ldd, %g1 + 0x40, %f0), NG4_retl_o2_plus_o4_plus_64) faligndata %f2, %f4, %f18 add %g1, 0x40, %g1 faligndata %f4, %f6, %f20 @@ -235,14 +386,14 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ faligndata %f10, %f12, %f26 faligndata %f12, %f14, %f28 faligndata %f14, %f0, %f30 - EX_ST_FP(STORE(std, %f16, %o0 + 0x00)) - EX_ST_FP(STORE(std, %f18, %o0 + 0x08)) - EX_ST_FP(STORE(std, %f20, %o0 + 0x10)) - EX_ST_FP(STORE(std, %f22, %o0 + 0x18)) - EX_ST_FP(STORE(std, %f24, %o0 + 0x20)) - EX_ST_FP(STORE(std, %f26, %o0 + 0x28)) - EX_ST_FP(STORE(std, %f28, %o0 + 0x30)) - EX_ST_FP(STORE(std, %f30, %o0 + 0x38)) + EX_ST_FP(STORE(std, %f16, %o0 + 0x00), NG4_retl_o2_plus_o4_plus_64) + EX_ST_FP(STORE(std, %f18, %o0 + 0x08), NG4_retl_o2_plus_o4_plus_56) + EX_ST_FP(STORE(std, %f20, %o0 + 0x10), NG4_retl_o2_plus_o4_plus_48) + EX_ST_FP(STORE(std, %f22, %o0 + 0x18), NG4_retl_o2_plus_o4_plus_40) + EX_ST_FP(STORE(std, %f24, %o0 + 0x20), NG4_retl_o2_plus_o4_plus_32) + EX_ST_FP(STORE(std, %f26, %o0 + 0x28), NG4_retl_o2_plus_o4_plus_24) + EX_ST_FP(STORE(std, %f28, %o0 + 0x30), NG4_retl_o2_plus_o4_plus_16) + EX_ST_FP(STORE(std, %f30, %o0 + 0x38), NG4_retl_o2_plus_o4_plus_8) add %o0, 0x40, %o0 bne,pt %icc, 1b LOAD(prefetch, %g1 + 0x200, #n_reads_strong) @@ -270,37 +421,38 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ andncc %o2, 0x20 - 1, %o5 be,pn %icc, 2f sub %o2, %o5, %o2 -1: EX_LD(LOAD(ldx, %o1 + 0x00, %g1)) - EX_LD(LOAD(ldx, %o1 + 0x08, %g2)) - EX_LD(LOAD(ldx, %o1 + 0x10, GLOBAL_SPARE)) - EX_LD(LOAD(ldx, %o1 + 0x18, %o4)) +1: EX_LD(LOAD(ldx, %o1 + 0x00, %g1), NG4_retl_o2_plus_o5) + EX_LD(LOAD(ldx, %o1 + 0x08, %g2), NG4_retl_o2_plus_o5) + EX_LD(LOAD(ldx, %o1 + 0x10, GLOBAL_SPARE), NG4_retl_o2_plus_o5) + EX_LD(LOAD(ldx, %o1 + 0x18, %o4), NG4_retl_o2_plus_o5) add %o1, 0x20, %o1 subcc %o5, 0x20, %o5 - EX_ST(STORE(stx, %g1, %o0 + 0x00)) - EX_ST(STORE(stx, %g2, %o0 + 0x08)) - EX_ST(STORE(stx, GLOBAL_SPARE, %o0 + 0x10)) - EX_ST(STORE(stx, %o4, %o0 + 0x18)) + EX_ST(STORE(stx, %g1, %o0 + 0x00), NG4_retl_o2_plus_o5_plus_32) + EX_ST(STORE(stx, %g2, %o0 + 0x08), NG4_retl_o2_plus_o5_plus_24) + EX_ST(STORE(stx, GLOBAL_SPARE, %o0 + 0x10), NG4_retl_o2_plus_o5_plus_24) + EX_ST(STORE(stx, %o4, %o0 + 0x18), NG4_retl_o2_plus_o5_plus_8) bne,pt %icc, 1b add %o0, 0x20, %o0 2: andcc %o2, 0x18, %o5 be,pt %icc, 3f sub %o2, %o5, %o2 -1: EX_LD(LOAD(ldx, %o1 + 0x00, %g1)) + +1: EX_LD(LOAD(ldx, %o1 + 0x00, %g1), NG4_retl_o2_plus_o5) add %o1, 0x08, %o1 add %o0, 0x08, %o0 subcc %o5, 0x08, %o5 bne,pt %icc, 1b - EX_ST(STORE(stx, %g1, %o0 - 0x08)) + EX_ST(STORE(stx, %g1, %o0 - 0x08), NG4_retl_o2_plus_o5_plus_8) 3: brz,pt %o2, .Lexit cmp %o2, 0x04 bl,pn %icc, .Ltiny nop - EX_LD(LOAD(lduw, %o1 + 0x00, %g1)) + EX_LD(LOAD(lduw, %o1 + 0x00, %g1), NG4_retl_o2) add %o1, 0x04, %o1 add %o0, 0x04, %o0 subcc %o2, 0x04, %o2 bne,pn %icc, .Ltiny - EX_ST(STORE(stw, %g1, %o0 - 0x04)) + EX_ST(STORE(stw, %g1, %o0 - 0x04), NG4_retl_o2_plus_4) ba,a,pt %icc, .Lexit .Lmedium_unaligned: /* First get dest 8 byte aligned. */ @@ -309,12 +461,12 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ brz,pt %g1, 2f sub %o2, %g1, %o2 -1: EX_LD(LOAD(ldub, %o1 + 0x00, %g2)) +1: EX_LD(LOAD(ldub, %o1 + 0x00, %g2), NG4_retl_o2_plus_g1) add %o1, 1, %o1 subcc %g1, 1, %g1 add %o0, 1, %o0 bne,pt %icc, 1b - EX_ST(STORE(stb, %g2, %o0 - 0x01)) + EX_ST(STORE(stb, %g2, %o0 - 0x01), NG4_retl_o2_plus_g1_plus_1) 2: and %o1, 0x7, %g1 brz,pn %g1, .Lmedium_noprefetch @@ -322,16 +474,16 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ mov 64, %g2 sub %g2, %g1, %g2 andn %o1, 0x7, %o1 - EX_LD(LOAD(ldx, %o1 + 0x00, %o4)) + EX_LD(LOAD(ldx, %o1 + 0x00, %o4), NG4_retl_o2) sllx %o4, %g1, %o4 andn %o2, 0x08 - 1, %o5 sub %o2, %o5, %o2 -1: EX_LD(LOAD(ldx, %o1 + 0x08, %g3)) +1: EX_LD(LOAD(ldx, %o1 + 0x08, %g3), NG4_retl_o2_plus_o5) add %o1, 0x08, %o1 subcc %o5, 0x08, %o5 srlx %g3, %g2, GLOBAL_SPARE or GLOBAL_SPARE, %o4, GLOBAL_SPARE - EX_ST(STORE(stx, GLOBAL_SPARE, %o0 + 0x00)) + EX_ST(STORE(stx, GLOBAL_SPARE, %o0 + 0x00), NG4_retl_o2_plus_o5_plus_8) add %o0, 0x08, %o0 bne,pt %icc, 1b sllx %g3, %g1, %o4 @@ -342,17 +494,17 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ ba,pt %icc, .Lsmall_unaligned .Ltiny: - EX_LD(LOAD(ldub, %o1 + 0x00, %g1)) + EX_LD(LOAD(ldub, %o1 + 0x00, %g1), NG4_retl_o2) subcc %o2, 1, %o2 be,pn %icc, .Lexit - EX_ST(STORE(stb, %g1, %o0 + 0x00)) - EX_LD(LOAD(ldub, %o1 + 0x01, %g1)) + EX_ST(STORE(stb, %g1, %o0 + 0x00), NG4_retl_o2_plus_1) + EX_LD(LOAD(ldub, %o1 + 0x01, %g1), NG4_retl_o2) subcc %o2, 1, %o2 be,pn %icc, .Lexit - EX_ST(STORE(stb, %g1, %o0 + 0x01)) - EX_LD(LOAD(ldub, %o1 + 0x02, %g1)) + EX_ST(STORE(stb, %g1, %o0 + 0x01), NG4_retl_o2_plus_1) + EX_LD(LOAD(ldub, %o1 + 0x02, %g1), NG4_retl_o2) ba,pt %icc, .Lexit - EX_ST(STORE(stb, %g1, %o0 + 0x02)) + EX_ST(STORE(stb, %g1, %o0 + 0x02), NG4_retl_o2) .Lsmall: andcc %g2, 0x3, %g0 @@ -360,22 +512,22 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ andn %o2, 0x4 - 1, %o5 sub %o2, %o5, %o2 1: - EX_LD(LOAD(lduw, %o1 + 0x00, %g1)) + EX_LD(LOAD(lduw, %o1 + 0x00, %g1), NG4_retl_o2_plus_o5) add %o1, 0x04, %o1 subcc %o5, 0x04, %o5 add %o0, 0x04, %o0 bne,pt %icc, 1b - EX_ST(STORE(stw, %g1, %o0 - 0x04)) + EX_ST(STORE(stw, %g1, %o0 - 0x04), NG4_retl_o2_plus_o5_plus_4) brz,pt %o2, .Lexit nop ba,a,pt %icc, .Ltiny .Lsmall_unaligned: -1: EX_LD(LOAD(ldub, %o1 + 0x00, %g1)) +1: EX_LD(LOAD(ldub, %o1 + 0x00, %g1), NG4_retl_o2) add %o1, 1, %o1 add %o0, 1, %o0 subcc %o2, 1, %o2 bne,pt %icc, 1b - EX_ST(STORE(stb, %g1, %o0 - 0x01)) + EX_ST(STORE(stb, %g1, %o0 - 0x01), NG4_retl_o2_plus_1) ba,a,pt %icc, .Lexit .size FUNC_NAME, .-FUNC_NAME -- cgit From 7ae3aaf53f1695877ccd5ebbc49ea65991e41f1e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 24 Oct 2016 19:32:12 -0700 Subject: sparc64: Convert NGcopy_{from,to}_user to accurate exception reporting. Report the exact number of bytes which have not been successfully copied when an exception occurs, using the running remaining length. Signed-off-by: David S. Miller --- arch/sparc/lib/NGcopy_from_user.S | 4 +- arch/sparc/lib/NGcopy_to_user.S | 4 +- arch/sparc/lib/NGmemcpy.S | 233 ++++++++++++++++++++++++++------------ 3 files changed, 162 insertions(+), 79 deletions(-) diff --git a/arch/sparc/lib/NGcopy_from_user.S b/arch/sparc/lib/NGcopy_from_user.S index e61694c444af..9cd42fcbc781 100644 --- a/arch/sparc/lib/NGcopy_from_user.S +++ b/arch/sparc/lib/NGcopy_from_user.S @@ -3,11 +3,11 @@ * Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net) */ -#define EX_LD(x) \ +#define EX_LD(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __ret_mone_asi;\ + .word 98b, y; \ .text; \ .align 4; diff --git a/arch/sparc/lib/NGcopy_to_user.S b/arch/sparc/lib/NGcopy_to_user.S index 2d6b33d3998f..5c358afd464e 100644 --- a/arch/sparc/lib/NGcopy_to_user.S +++ b/arch/sparc/lib/NGcopy_to_user.S @@ -3,11 +3,11 @@ * Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net) */ -#define EX_ST(x) \ +#define EX_ST(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __ret_mone_asi;\ + .word 98b, y; \ .text; \ .align 4; diff --git a/arch/sparc/lib/NGmemcpy.S b/arch/sparc/lib/NGmemcpy.S index 96a14caf6966..d88c4ed50a00 100644 --- a/arch/sparc/lib/NGmemcpy.S +++ b/arch/sparc/lib/NGmemcpy.S @@ -4,6 +4,7 @@ */ #ifdef __KERNEL__ +#include #include #include #define GLOBAL_SPARE %g7 @@ -27,15 +28,11 @@ #endif #ifndef EX_LD -#define EX_LD(x) x +#define EX_LD(x,y) x #endif #ifndef EX_ST -#define EX_ST(x) x -#endif - -#ifndef EX_RETVAL -#define EX_RETVAL(x) x +#define EX_ST(x,y) x #endif #ifndef LOAD @@ -79,6 +76,92 @@ .register %g3,#scratch .text +#ifndef EX_RETVAL +#define EX_RETVAL(x) x +__restore_asi: + ret + wr %g0, ASI_AIUS, %asi + restore +ENTRY(NG_ret_i2_plus_i4_plus_1) + ba,pt %xcc, __restore_asi + add %i2, %i5, %i0 +ENDPROC(NG_ret_i2_plus_i4_plus_1) +ENTRY(NG_ret_i2_plus_g1) + ba,pt %xcc, __restore_asi + add %i2, %g1, %i0 +ENDPROC(NG_ret_i2_plus_g1) +ENTRY(NG_ret_i2_plus_g1_minus_8) + sub %g1, 8, %g1 + ba,pt %xcc, __restore_asi + add %i2, %g1, %i0 +ENDPROC(NG_ret_i2_plus_g1_minus_8) +ENTRY(NG_ret_i2_plus_g1_minus_16) + sub %g1, 16, %g1 + ba,pt %xcc, __restore_asi + add %i2, %g1, %i0 +ENDPROC(NG_ret_i2_plus_g1_minus_16) +ENTRY(NG_ret_i2_plus_g1_minus_24) + sub %g1, 24, %g1 + ba,pt %xcc, __restore_asi + add %i2, %g1, %i0 +ENDPROC(NG_ret_i2_plus_g1_minus_24) +ENTRY(NG_ret_i2_plus_g1_minus_32) + sub %g1, 32, %g1 + ba,pt %xcc, __restore_asi + add %i2, %g1, %i0 +ENDPROC(NG_ret_i2_plus_g1_minus_32) +ENTRY(NG_ret_i2_plus_g1_minus_40) + sub %g1, 40, %g1 + ba,pt %xcc, __restore_asi + add %i2, %g1, %i0 +ENDPROC(NG_ret_i2_plus_g1_minus_40) +ENTRY(NG_ret_i2_plus_g1_minus_48) + sub %g1, 48, %g1 + ba,pt %xcc, __restore_asi + add %i2, %g1, %i0 +ENDPROC(NG_ret_i2_plus_g1_minus_48) +ENTRY(NG_ret_i2_plus_g1_minus_56) + sub %g1, 56, %g1 + ba,pt %xcc, __restore_asi + add %i2, %g1, %i0 +ENDPROC(NG_ret_i2_plus_g1_minus_56) +ENTRY(NG_ret_i2_plus_i4) + ba,pt %xcc, __restore_asi + add %i2, %i4, %i0 +ENDPROC(NG_ret_i2_plus_i4) +ENTRY(NG_ret_i2_plus_i4_minus_8) + sub %i4, 8, %i4 + ba,pt %xcc, __restore_asi + add %i2, %i4, %i0 +ENDPROC(NG_ret_i2_plus_i4_minus_8) +ENTRY(NG_ret_i2_plus_8) + ba,pt %xcc, __restore_asi + add %i2, 8, %i0 +ENDPROC(NG_ret_i2_plus_8) +ENTRY(NG_ret_i2_plus_4) + ba,pt %xcc, __restore_asi + add %i2, 4, %i0 +ENDPROC(NG_ret_i2_plus_4) +ENTRY(NG_ret_i2_plus_1) + ba,pt %xcc, __restore_asi + add %i2, 1, %i0 +ENDPROC(NG_ret_i2_plus_1) +ENTRY(NG_ret_i2_plus_g1_plus_1) + add %g1, 1, %g1 + ba,pt %xcc, __restore_asi + add %i2, %g1, %i0 +ENDPROC(NG_ret_i2_plus_g1_plus_1) +ENTRY(NG_ret_i2) + ba,pt %xcc, __restore_asi + mov %i2, %i0 +ENDPROC(NG_ret_i2) +ENTRY(NG_ret_i2_and_7_plus_i4) + and %i2, 7, %i2 + ba,pt %xcc, __restore_asi + add %i2, %i4, %i0 +ENDPROC(NG_ret_i2_and_7_plus_i4) +#endif + .align 64 .globl FUNC_NAME @@ -126,8 +209,8 @@ FUNC_NAME: /* %i0=dst, %i1=src, %i2=len */ sub %g0, %i4, %i4 ! bytes to align dst sub %i2, %i4, %i2 1: subcc %i4, 1, %i4 - EX_LD(LOAD(ldub, %i1, %g1)) - EX_ST(STORE(stb, %g1, %o0)) + EX_LD(LOAD(ldub, %i1, %g1), NG_ret_i2_plus_i4_plus_1) + EX_ST(STORE(stb, %g1, %o0), NG_ret_i2_plus_i4_plus_1) add %i1, 1, %i1 bne,pt %XCC, 1b add %o0, 1, %o0 @@ -160,7 +243,7 @@ FUNC_NAME: /* %i0=dst, %i1=src, %i2=len */ and %i4, 0x7, GLOBAL_SPARE sll GLOBAL_SPARE, 3, GLOBAL_SPARE mov 64, %i5 - EX_LD(LOAD_TWIN(%i1, %g2, %g3)) + EX_LD(LOAD_TWIN(%i1, %g2, %g3), NG_ret_i2_plus_g1) sub %i5, GLOBAL_SPARE, %i5 mov 16, %o4 mov 32, %o5 @@ -178,31 +261,31 @@ FUNC_NAME: /* %i0=dst, %i1=src, %i2=len */ srlx WORD3, PRE_SHIFT, TMP; \ or WORD2, TMP, WORD2; -8: EX_LD(LOAD_TWIN(%i1 + %o4, %o2, %o3)) +8: EX_LD(LOAD_TWIN(%i1 + %o4, %o2, %o3), NG_ret_i2_plus_g1) MIX_THREE_WORDS(%g2, %g3, %o2, %i5, GLOBAL_SPARE, %o1) LOAD(prefetch, %i1 + %i3, #one_read) - EX_ST(STORE_INIT(%g2, %o0 + 0x00)) - EX_ST(STORE_INIT(%g3, %o0 + 0x08)) + EX_ST(STORE_INIT(%g2, %o0 + 0x00), NG_ret_i2_plus_g1) + EX_ST(STORE_INIT(%g3, %o0 + 0x08), NG_ret_i2_plus_g1_minus_8) - EX_LD(LOAD_TWIN(%i1 + %o5, %g2, %g3)) + EX_LD(LOAD_TWIN(%i1 + %o5, %g2, %g3), NG_ret_i2_plus_g1_minus_16) MIX_THREE_WORDS(%o2, %o3, %g2, %i5, GLOBAL_SPARE, %o1) - EX_ST(STORE_INIT(%o2, %o0 + 0x10)) - EX_ST(STORE_INIT(%o3, %o0 + 0x18)) + EX_ST(STORE_INIT(%o2, %o0 + 0x10), NG_ret_i2_plus_g1_minus_16) + EX_ST(STORE_INIT(%o3, %o0 + 0x18), NG_ret_i2_plus_g1_minus_24) - EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3)) + EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3), NG_ret_i2_plus_g1_minus_32) MIX_THREE_WORDS(%g2, %g3, %o2, %i5, GLOBAL_SPARE, %o1) - EX_ST(STORE_INIT(%g2, %o0 + 0x20)) - EX_ST(STORE_INIT(%g3, %o0 + 0x28)) + EX_ST(STORE_INIT(%g2, %o0 + 0x20), NG_ret_i2_plus_g1_minus_32) + EX_ST(STORE_INIT(%g3, %o0 + 0x28), NG_ret_i2_plus_g1_minus_40) - EX_LD(LOAD_TWIN(%i1 + %i3, %g2, %g3)) + EX_LD(LOAD_TWIN(%i1 + %i3, %g2, %g3), NG_ret_i2_plus_g1_minus_48) add %i1, 64, %i1 MIX_THREE_WORDS(%o2, %o3, %g2, %i5, GLOBAL_SPARE, %o1) - EX_ST(STORE_INIT(%o2, %o0 + 0x30)) - EX_ST(STORE_INIT(%o3, %o0 + 0x38)) + EX_ST(STORE_INIT(%o2, %o0 + 0x30), NG_ret_i2_plus_g1_minus_48) + EX_ST(STORE_INIT(%o3, %o0 + 0x38), NG_ret_i2_plus_g1_minus_56) subcc %g1, 64, %g1 bne,pt %XCC, 8b @@ -211,31 +294,31 @@ FUNC_NAME: /* %i0=dst, %i1=src, %i2=len */ ba,pt %XCC, 60f add %i1, %i4, %i1 -9: EX_LD(LOAD_TWIN(%i1 + %o4, %o2, %o3)) +9: EX_LD(LOAD_TWIN(%i1 + %o4, %o2, %o3), NG_ret_i2_plus_g1) MIX_THREE_WORDS(%g3, %o2, %o3, %i5, GLOBAL_SPARE, %o1) LOAD(prefetch, %i1 + %i3, #one_read) - EX_ST(STORE_INIT(%g3, %o0 + 0x00)) - EX_ST(STORE_INIT(%o2, %o0 + 0x08)) + EX_ST(STORE_INIT(%g3, %o0 + 0x00), NG_ret_i2_plus_g1) + EX_ST(STORE_INIT(%o2, %o0 + 0x08), NG_ret_i2_plus_g1_minus_8) - EX_LD(LOAD_TWIN(%i1 + %o5, %g2, %g3)) + EX_LD(LOAD_TWIN(%i1 + %o5, %g2, %g3), NG_ret_i2_plus_g1_minus_16) MIX_THREE_WORDS(%o3, %g2, %g3, %i5, GLOBAL_SPARE, %o1) - EX_ST(STORE_INIT(%o3, %o0 + 0x10)) - EX_ST(STORE_INIT(%g2, %o0 + 0x18)) + EX_ST(STORE_INIT(%o3, %o0 + 0x10), NG_ret_i2_plus_g1_minus_16) + EX_ST(STORE_INIT(%g2, %o0 + 0x18), NG_ret_i2_plus_g1_minus_24) - EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3)) + EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3), NG_ret_i2_plus_g1_minus_32) MIX_THREE_WORDS(%g3, %o2, %o3, %i5, GLOBAL_SPARE, %o1) - EX_ST(STORE_INIT(%g3, %o0 + 0x20)) - EX_ST(STORE_INIT(%o2, %o0 + 0x28)) + EX_ST(STORE_INIT(%g3, %o0 + 0x20), NG_ret_i2_plus_g1_minus_32) + EX_ST(STORE_INIT(%o2, %o0 + 0x28), NG_ret_i2_plus_g1_minus_40) - EX_LD(LOAD_TWIN(%i1 + %i3, %g2, %g3)) + EX_LD(LOAD_TWIN(%i1 + %i3, %g2, %g3), NG_ret_i2_plus_g1_minus_48) add %i1, 64, %i1 MIX_THREE_WORDS(%o3, %g2, %g3, %i5, GLOBAL_SPARE, %o1) - EX_ST(STORE_INIT(%o3, %o0 + 0x30)) - EX_ST(STORE_INIT(%g2, %o0 + 0x38)) + EX_ST(STORE_INIT(%o3, %o0 + 0x30), NG_ret_i2_plus_g1_minus_48) + EX_ST(STORE_INIT(%g2, %o0 + 0x38), NG_ret_i2_plus_g1_minus_56) subcc %g1, 64, %g1 bne,pt %XCC, 9b @@ -249,25 +332,25 @@ FUNC_NAME: /* %i0=dst, %i1=src, %i2=len */ * one twin load ahead, then add 8 back into source when * we finish the loop. */ - EX_LD(LOAD_TWIN(%i1, %o4, %o5)) + EX_LD(LOAD_TWIN(%i1, %o4, %o5), NG_ret_i2_plus_g1) mov 16, %o7 mov 32, %g2 mov 48, %g3 mov 64, %o1 -1: EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3)) +1: EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3), NG_ret_i2_plus_g1) LOAD(prefetch, %i1 + %o1, #one_read) - EX_ST(STORE_INIT(%o5, %o0 + 0x00)) ! initializes cache line - EX_ST(STORE_INIT(%o2, %o0 + 0x08)) - EX_LD(LOAD_TWIN(%i1 + %g2, %o4, %o5)) - EX_ST(STORE_INIT(%o3, %o0 + 0x10)) - EX_ST(STORE_INIT(%o4, %o0 + 0x18)) - EX_LD(LOAD_TWIN(%i1 + %g3, %o2, %o3)) - EX_ST(STORE_INIT(%o5, %o0 + 0x20)) - EX_ST(STORE_INIT(%o2, %o0 + 0x28)) - EX_LD(LOAD_TWIN(%i1 + %o1, %o4, %o5)) + EX_ST(STORE_INIT(%o5, %o0 + 0x00), NG_ret_i2_plus_g1) ! initializes cache line + EX_ST(STORE_INIT(%o2, %o0 + 0x08), NG_ret_i2_plus_g1_minus_8) + EX_LD(LOAD_TWIN(%i1 + %g2, %o4, %o5), NG_ret_i2_plus_g1_minus_16) + EX_ST(STORE_INIT(%o3, %o0 + 0x10), NG_ret_i2_plus_g1_minus_16) + EX_ST(STORE_INIT(%o4, %o0 + 0x18), NG_ret_i2_plus_g1_minus_24) + EX_LD(LOAD_TWIN(%i1 + %g3, %o2, %o3), NG_ret_i2_plus_g1_minus_32) + EX_ST(STORE_INIT(%o5, %o0 + 0x20), NG_ret_i2_plus_g1_minus_32) + EX_ST(STORE_INIT(%o2, %o0 + 0x28), NG_ret_i2_plus_g1_minus_40) + EX_LD(LOAD_TWIN(%i1 + %o1, %o4, %o5), NG_ret_i2_plus_g1_minus_48) add %i1, 64, %i1 - EX_ST(STORE_INIT(%o3, %o0 + 0x30)) - EX_ST(STORE_INIT(%o4, %o0 + 0x38)) + EX_ST(STORE_INIT(%o3, %o0 + 0x30), NG_ret_i2_plus_g1_minus_48) + EX_ST(STORE_INIT(%o4, %o0 + 0x38), NG_ret_i2_plus_g1_minus_56) subcc %g1, 64, %g1 bne,pt %XCC, 1b add %o0, 64, %o0 @@ -282,20 +365,20 @@ FUNC_NAME: /* %i0=dst, %i1=src, %i2=len */ mov 32, %g2 mov 48, %g3 mov 64, %o1 -1: EX_LD(LOAD_TWIN(%i1 + %g0, %o4, %o5)) - EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3)) +1: EX_LD(LOAD_TWIN(%i1 + %g0, %o4, %o5), NG_ret_i2_plus_g1) + EX_LD(LOAD_TWIN(%i1 + %o7, %o2, %o3), NG_ret_i2_plus_g1) LOAD(prefetch, %i1 + %o1, #one_read) - EX_ST(STORE_INIT(%o4, %o0 + 0x00)) ! initializes cache line - EX_ST(STORE_INIT(%o5, %o0 + 0x08)) - EX_LD(LOAD_TWIN(%i1 + %g2, %o4, %o5)) - EX_ST(STORE_INIT(%o2, %o0 + 0x10)) - EX_ST(STORE_INIT(%o3, %o0 + 0x18)) - EX_LD(LOAD_TWIN(%i1 + %g3, %o2, %o3)) + EX_ST(STORE_INIT(%o4, %o0 + 0x00), NG_ret_i2_plus_g1) ! initializes cache line + EX_ST(STORE_INIT(%o5, %o0 + 0x08), NG_ret_i2_plus_g1_minus_8) + EX_LD(LOAD_TWIN(%i1 + %g2, %o4, %o5), NG_ret_i2_plus_g1_minus_16) + EX_ST(STORE_INIT(%o2, %o0 + 0x10), NG_ret_i2_plus_g1_minus_16) + EX_ST(STORE_INIT(%o3, %o0 + 0x18), NG_ret_i2_plus_g1_minus_24) + EX_LD(LOAD_TWIN(%i1 + %g3, %o2, %o3), NG_ret_i2_plus_g1_minus_32) add %i1, 64, %i1 - EX_ST(STORE_INIT(%o4, %o0 + 0x20)) - EX_ST(STORE_INIT(%o5, %o0 + 0x28)) - EX_ST(STORE_INIT(%o2, %o0 + 0x30)) - EX_ST(STORE_INIT(%o3, %o0 + 0x38)) + EX_ST(STORE_INIT(%o4, %o0 + 0x20), NG_ret_i2_plus_g1_minus_32) + EX_ST(STORE_INIT(%o5, %o0 + 0x28), NG_ret_i2_plus_g1_minus_40) + EX_ST(STORE_INIT(%o2, %o0 + 0x30), NG_ret_i2_plus_g1_minus_48) + EX_ST(STORE_INIT(%o3, %o0 + 0x38), NG_ret_i2_plus_g1_minus_56) subcc %g1, 64, %g1 bne,pt %XCC, 1b add %o0, 64, %o0 @@ -321,28 +404,28 @@ FUNC_NAME: /* %i0=dst, %i1=src, %i2=len */ andn %i2, 0xf, %i4 and %i2, 0xf, %i2 1: subcc %i4, 0x10, %i4 - EX_LD(LOAD(ldx, %i1, %o4)) + EX_LD(LOAD(ldx, %i1, %o4), NG_ret_i2_plus_i4) add %i1, 0x08, %i1 - EX_LD(LOAD(ldx, %i1, %g1)) + EX_LD(LOAD(ldx, %i1, %g1), NG_ret_i2_plus_i4) sub %i1, 0x08, %i1 - EX_ST(STORE(stx, %o4, %i1 + %i3)) + EX_ST(STORE(stx, %o4, %i1 + %i3), NG_ret_i2_plus_i4) add %i1, 0x8, %i1 - EX_ST(STORE(stx, %g1, %i1 + %i3)) + EX_ST(STORE(stx, %g1, %i1 + %i3), NG_ret_i2_plus_i4_minus_8) bgu,pt %XCC, 1b add %i1, 0x8, %i1 73: andcc %i2, 0x8, %g0 be,pt %XCC, 1f nop sub %i2, 0x8, %i2 - EX_LD(LOAD(ldx, %i1, %o4)) - EX_ST(STORE(stx, %o4, %i1 + %i3)) + EX_LD(LOAD(ldx, %i1, %o4), NG_ret_i2_plus_8) + EX_ST(STORE(stx, %o4, %i1 + %i3), NG_ret_i2_plus_8) add %i1, 0x8, %i1 1: andcc %i2, 0x4, %g0 be,pt %XCC, 1f nop sub %i2, 0x4, %i2 - EX_LD(LOAD(lduw, %i1, %i5)) - EX_ST(STORE(stw, %i5, %i1 + %i3)) + EX_LD(LOAD(lduw, %i1, %i5), NG_ret_i2_plus_4) + EX_ST(STORE(stw, %i5, %i1 + %i3), NG_ret_i2_plus_4) add %i1, 0x4, %i1 1: cmp %i2, 0 be,pt %XCC, 85f @@ -358,8 +441,8 @@ FUNC_NAME: /* %i0=dst, %i1=src, %i2=len */ sub %i2, %g1, %i2 1: subcc %g1, 1, %g1 - EX_LD(LOAD(ldub, %i1, %i5)) - EX_ST(STORE(stb, %i5, %i1 + %i3)) + EX_LD(LOAD(ldub, %i1, %i5), NG_ret_i2_plus_g1_plus_1) + EX_ST(STORE(stb, %i5, %i1 + %i3), NG_ret_i2_plus_g1_plus_1) bgu,pt %icc, 1b add %i1, 1, %i1 @@ -375,16 +458,16 @@ FUNC_NAME: /* %i0=dst, %i1=src, %i2=len */ 8: mov 64, %i3 andn %i1, 0x7, %i1 - EX_LD(LOAD(ldx, %i1, %g2)) + EX_LD(LOAD(ldx, %i1, %g2), NG_ret_i2) sub %i3, %g1, %i3 andn %i2, 0x7, %i4 sllx %g2, %g1, %g2 1: add %i1, 0x8, %i1 - EX_LD(LOAD(ldx, %i1, %g3)) + EX_LD(LOAD(ldx, %i1, %g3), NG_ret_i2_and_7_plus_i4) subcc %i4, 0x8, %i4 srlx %g3, %i3, %i5 or %i5, %g2, %i5 - EX_ST(STORE(stx, %i5, %o0)) + EX_ST(STORE(stx, %i5, %o0), NG_ret_i2_and_7_plus_i4) add %o0, 0x8, %o0 bgu,pt %icc, 1b sllx %g3, %g1, %g2 @@ -404,8 +487,8 @@ FUNC_NAME: /* %i0=dst, %i1=src, %i2=len */ 1: subcc %i2, 4, %i2 - EX_LD(LOAD(lduw, %i1, %g1)) - EX_ST(STORE(stw, %g1, %i1 + %i3)) + EX_LD(LOAD(lduw, %i1, %g1), NG_ret_i2_plus_4) + EX_ST(STORE(stw, %g1, %i1 + %i3), NG_ret_i2_plus_4) bgu,pt %XCC, 1b add %i1, 4, %i1 @@ -415,8 +498,8 @@ FUNC_NAME: /* %i0=dst, %i1=src, %i2=len */ .align 32 90: subcc %i2, 1, %i2 - EX_LD(LOAD(ldub, %i1, %g1)) - EX_ST(STORE(stb, %g1, %i1 + %i3)) + EX_LD(LOAD(ldub, %i1, %g1), NG_ret_i2_plus_1) + EX_ST(STORE(stb, %g1, %i1 + %i3), NG_ret_i2_plus_1) bgu,pt %XCC, 90b add %i1, 1, %i1 ret -- cgit From e93704e4464fdc191f73fce35129c18de2ebf95d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 24 Oct 2016 20:46:44 -0700 Subject: sparc64: Convert NG2copy_{from,to}_user to accurate exception reporting. Report the exact number of bytes which have not been successfully copied when an exception occurs, using the running remaining length. Signed-off-by: David S. Miller --- arch/sparc/lib/NG2copy_from_user.S | 8 +- arch/sparc/lib/NG2copy_to_user.S | 8 +- arch/sparc/lib/NG2memcpy.S | 228 +++++++++++++++++++++++-------------- 3 files changed, 153 insertions(+), 91 deletions(-) diff --git a/arch/sparc/lib/NG2copy_from_user.S b/arch/sparc/lib/NG2copy_from_user.S index 4d47fa5519d4..b79a6998d87c 100644 --- a/arch/sparc/lib/NG2copy_from_user.S +++ b/arch/sparc/lib/NG2copy_from_user.S @@ -3,19 +3,19 @@ * Copyright (C) 2007 David S. Miller (davem@davemloft.net) */ -#define EX_LD(x) \ +#define EX_LD(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone_asi;\ + .word 98b, y; \ .text; \ .align 4; -#define EX_LD_FP(x) \ +#define EX_LD_FP(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone_asi_fp;\ + .word 98b, y##_fp; \ .text; \ .align 4; diff --git a/arch/sparc/lib/NG2copy_to_user.S b/arch/sparc/lib/NG2copy_to_user.S index 2078d752709a..dcec55f254ab 100644 --- a/arch/sparc/lib/NG2copy_to_user.S +++ b/arch/sparc/lib/NG2copy_to_user.S @@ -3,19 +3,19 @@ * Copyright (C) 2007 David S. Miller (davem@davemloft.net) */ -#define EX_ST(x) \ +#define EX_ST(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone_asi;\ + .word 98b, y; \ .text; \ .align 4; -#define EX_ST_FP(x) \ +#define EX_ST_FP(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone_asi_fp;\ + .word 98b, y##_fp; \ .text; \ .align 4; diff --git a/arch/sparc/lib/NG2memcpy.S b/arch/sparc/lib/NG2memcpy.S index d5f585df2f3f..c629dbd121b6 100644 --- a/arch/sparc/lib/NG2memcpy.S +++ b/arch/sparc/lib/NG2memcpy.S @@ -4,6 +4,7 @@ */ #ifdef __KERNEL__ +#include #include #include #define GLOBAL_SPARE %g7 @@ -32,21 +33,17 @@ #endif #ifndef EX_LD -#define EX_LD(x) x +#define EX_LD(x,y) x #endif #ifndef EX_LD_FP -#define EX_LD_FP(x) x +#define EX_LD_FP(x,y) x #endif #ifndef EX_ST -#define EX_ST(x) x +#define EX_ST(x,y) x #endif #ifndef EX_ST_FP -#define EX_ST_FP(x) x -#endif - -#ifndef EX_RETVAL -#define EX_RETVAL(x) x +#define EX_ST_FP(x,y) x #endif #ifndef LOAD @@ -140,45 +137,110 @@ fsrc2 %x6, %f12; \ fsrc2 %x7, %f14; #define FREG_LOAD_1(base, x0) \ - EX_LD_FP(LOAD(ldd, base + 0x00, %x0)) + EX_LD_FP(LOAD(ldd, base + 0x00, %x0), NG2_retl_o2_plus_g1) #define FREG_LOAD_2(base, x0, x1) \ - EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1), NG2_retl_o2_plus_g1); #define FREG_LOAD_3(base, x0, x1, x2) \ - EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \ - EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x10, %x2), NG2_retl_o2_plus_g1); #define FREG_LOAD_4(base, x0, x1, x2, x3) \ - EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \ - EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \ - EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x10, %x2), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x18, %x3), NG2_retl_o2_plus_g1); #define FREG_LOAD_5(base, x0, x1, x2, x3, x4) \ - EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \ - EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \ - EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \ - EX_LD_FP(LOAD(ldd, base + 0x20, %x4)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x10, %x2), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x18, %x3), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x20, %x4), NG2_retl_o2_plus_g1); #define FREG_LOAD_6(base, x0, x1, x2, x3, x4, x5) \ - EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \ - EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \ - EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \ - EX_LD_FP(LOAD(ldd, base + 0x20, %x4)); \ - EX_LD_FP(LOAD(ldd, base + 0x28, %x5)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x10, %x2), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x18, %x3), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x20, %x4), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x28, %x5), NG2_retl_o2_plus_g1); #define FREG_LOAD_7(base, x0, x1, x2, x3, x4, x5, x6) \ - EX_LD_FP(LOAD(ldd, base + 0x00, %x0)); \ - EX_LD_FP(LOAD(ldd, base + 0x08, %x1)); \ - EX_LD_FP(LOAD(ldd, base + 0x10, %x2)); \ - EX_LD_FP(LOAD(ldd, base + 0x18, %x3)); \ - EX_LD_FP(LOAD(ldd, base + 0x20, %x4)); \ - EX_LD_FP(LOAD(ldd, base + 0x28, %x5)); \ - EX_LD_FP(LOAD(ldd, base + 0x30, %x6)); + EX_LD_FP(LOAD(ldd, base + 0x00, %x0), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x08, %x1), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x10, %x2), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x18, %x3), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x20, %x4), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x28, %x5), NG2_retl_o2_plus_g1); \ + EX_LD_FP(LOAD(ldd, base + 0x30, %x6), NG2_retl_o2_plus_g1); .register %g2,#scratch .register %g3,#scratch .text +#ifndef EX_RETVAL +#define EX_RETVAL(x) x +__restore_fp: + VISExitHalf +__restore_asi: + retl + wr %g0, ASI_AIUS, %asi +ENTRY(NG2_retl_o2) + ba,pt %xcc, __restore_asi + mov %o2, %o0 +ENDPROC(NG2_retl_o2) +ENTRY(NG2_retl_o2_plus_1) + ba,pt %xcc, __restore_asi + add %o2, 1, %o0 +ENDPROC(NG2_retl_o2_plus_1) +ENTRY(NG2_retl_o2_plus_4) + ba,pt %xcc, __restore_asi + add %o2, 4, %o0 +ENDPROC(NG2_retl_o2_plus_4) +ENTRY(NG2_retl_o2_plus_8) + ba,pt %xcc, __restore_asi + add %o2, 8, %o0 +ENDPROC(NG2_retl_o2_plus_8) +ENTRY(NG2_retl_o2_plus_o4_plus_1) + add %o4, 1, %o4 + ba,pt %xcc, __restore_asi + add %o2, %o4, %o0 +ENDPROC(NG2_retl_o2_plus_o4_plus_1) +ENTRY(NG2_retl_o2_plus_o4_plus_8) + add %o4, 8, %o4 + ba,pt %xcc, __restore_asi + add %o2, %o4, %o0 +ENDPROC(NG2_retl_o2_plus_o4_plus_8) +ENTRY(NG2_retl_o2_plus_o4_plus_16) + add %o4, 16, %o4 + ba,pt %xcc, __restore_asi + add %o2, %o4, %o0 +ENDPROC(NG2_retl_o2_plus_o4_plus_16) +ENTRY(NG2_retl_o2_plus_g1_fp) + ba,pt %xcc, __restore_fp + add %o2, %g1, %o0 +ENDPROC(NG2_retl_o2_plus_g1_fp) +ENTRY(NG2_retl_o2_plus_g1_plus_64_fp) + add %g1, 64, %g1 + ba,pt %xcc, __restore_fp + add %o2, %g1, %o0 +ENDPROC(NG2_retl_o2_plus_g1_plus_64_fp) +ENTRY(NG2_retl_o2_plus_g1_plus_1) + add %g1, 1, %g1 + ba,pt %xcc, __restore_asi + add %o2, %g1, %o0 +ENDPROC(NG2_retl_o2_plus_g1_plus_1) +ENTRY(NG2_retl_o2_and_7_plus_o4) + and %o2, 7, %o2 + ba,pt %xcc, __restore_asi + add %o2, %o4, %o0 +ENDPROC(NG2_retl_o2_and_7_plus_o4) +ENTRY(NG2_retl_o2_and_7_plus_o4_plus_8) + and %o2, 7, %o2 + add %o4, 8, %o4 + ba,pt %xcc, __restore_asi + add %o2, %o4, %o0 +ENDPROC(NG2_retl_o2_and_7_plus_o4_plus_8) +#endif + .align 64 .globl FUNC_NAME @@ -230,8 +292,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ sub %g0, %o4, %o4 ! bytes to align dst sub %o2, %o4, %o2 1: subcc %o4, 1, %o4 - EX_LD(LOAD(ldub, %o1, %g1)) - EX_ST(STORE(stb, %g1, %o0)) + EX_LD(LOAD(ldub, %o1, %g1), NG2_retl_o2_plus_o4_plus_1) + EX_ST(STORE(stb, %g1, %o0), NG2_retl_o2_plus_o4_plus_1) add %o1, 1, %o1 bne,pt %XCC, 1b add %o0, 1, %o0 @@ -281,11 +343,11 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ nop /* fall through for 0 < low bits < 8 */ 110: sub %o4, 64, %g2 - EX_LD_FP(LOAD_BLK(%g2, %f0)) -1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) - EX_LD_FP(LOAD_BLK(%o4, %f16)) + EX_LD_FP(LOAD_BLK(%g2, %f0), NG2_retl_o2_plus_g1) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1) + EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1) FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f14, f16) - EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1) FREG_MOVE_8(f16, f18, f20, f22, f24, f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -296,10 +358,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 120: sub %o4, 56, %g2 FREG_LOAD_7(%g2, f0, f2, f4, f6, f8, f10, f12) -1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) - EX_LD_FP(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1) + EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1) FREG_FROB(f0, f2, f4, f6, f8, f10, f12, f16, f18) - EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1) FREG_MOVE_7(f18, f20, f22, f24, f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -310,10 +372,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 130: sub %o4, 48, %g2 FREG_LOAD_6(%g2, f0, f2, f4, f6, f8, f10) -1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) - EX_LD_FP(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1) + EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1) FREG_FROB(f0, f2, f4, f6, f8, f10, f16, f18, f20) - EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1) FREG_MOVE_6(f20, f22, f24, f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -324,10 +386,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 140: sub %o4, 40, %g2 FREG_LOAD_5(%g2, f0, f2, f4, f6, f8) -1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) - EX_LD_FP(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1) + EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1) FREG_FROB(f0, f2, f4, f6, f8, f16, f18, f20, f22) - EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1) FREG_MOVE_5(f22, f24, f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -338,10 +400,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 150: sub %o4, 32, %g2 FREG_LOAD_4(%g2, f0, f2, f4, f6) -1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) - EX_LD_FP(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1) + EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1) FREG_FROB(f0, f2, f4, f6, f16, f18, f20, f22, f24) - EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1) FREG_MOVE_4(f24, f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -352,10 +414,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 160: sub %o4, 24, %g2 FREG_LOAD_3(%g2, f0, f2, f4) -1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) - EX_LD_FP(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1) + EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1) FREG_FROB(f0, f2, f4, f16, f18, f20, f22, f24, f26) - EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1) FREG_MOVE_3(f26, f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -366,10 +428,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 170: sub %o4, 16, %g2 FREG_LOAD_2(%g2, f0, f2) -1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) - EX_LD_FP(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1) + EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1) FREG_FROB(f0, f2, f16, f18, f20, f22, f24, f26, f28) - EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1) FREG_MOVE_2(f28, f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -380,10 +442,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 180: sub %o4, 8, %g2 FREG_LOAD_1(%g2, f0) -1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) - EX_LD_FP(LOAD_BLK(%o4, %f16)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1) + EX_LD_FP(LOAD_BLK(%o4, %f16), NG2_retl_o2_plus_g1) FREG_FROB(f0, f16, f18, f20, f22, f24, f26, f28, f30) - EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1) FREG_MOVE_1(f30) subcc %g1, 64, %g1 add %o4, 64, %o4 @@ -393,10 +455,10 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ nop 190: -1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3)) +1: EX_ST_FP(STORE_INIT(%g0, %o4 + %g3), NG2_retl_o2_plus_g1) subcc %g1, 64, %g1 - EX_LD_FP(LOAD_BLK(%o4, %f0)) - EX_ST_FP(STORE_BLK(%f0, %o4 + %g3)) + EX_LD_FP(LOAD_BLK(%o4, %f0), NG2_retl_o2_plus_g1_plus_64) + EX_ST_FP(STORE_BLK(%f0, %o4 + %g3), NG2_retl_o2_plus_g1_plus_64) add %o4, 64, %o4 bne,pt %xcc, 1b LOAD(prefetch, %o4 + 64, #one_read) @@ -423,28 +485,28 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ andn %o2, 0xf, %o4 and %o2, 0xf, %o2 1: subcc %o4, 0x10, %o4 - EX_LD(LOAD(ldx, %o1, %o5)) + EX_LD(LOAD(ldx, %o1, %o5), NG2_retl_o2_plus_o4_plus_16) add %o1, 0x08, %o1 - EX_LD(LOAD(ldx, %o1, %g1)) + EX_LD(LOAD(ldx, %o1, %g1), NG2_retl_o2_plus_o4_plus_16) sub %o1, 0x08, %o1 - EX_ST(STORE(stx, %o5, %o1 + GLOBAL_SPARE)) + EX_ST(STORE(stx, %o5, %o1 + GLOBAL_SPARE), NG2_retl_o2_plus_o4_plus_16) add %o1, 0x8, %o1 - EX_ST(STORE(stx, %g1, %o1 + GLOBAL_SPARE)) + EX_ST(STORE(stx, %g1, %o1 + GLOBAL_SPARE), NG2_retl_o2_plus_o4_plus_8) bgu,pt %XCC, 1b add %o1, 0x8, %o1 73: andcc %o2, 0x8, %g0 be,pt %XCC, 1f nop sub %o2, 0x8, %o2 - EX_LD(LOAD(ldx, %o1, %o5)) - EX_ST(STORE(stx, %o5, %o1 + GLOBAL_SPARE)) + EX_LD(LOAD(ldx, %o1, %o5), NG2_retl_o2_plus_8) + EX_ST(STORE(stx, %o5, %o1 + GLOBAL_SPARE), NG2_retl_o2_plus_8) add %o1, 0x8, %o1 1: andcc %o2, 0x4, %g0 be,pt %XCC, 1f nop sub %o2, 0x4, %o2 - EX_LD(LOAD(lduw, %o1, %o5)) - EX_ST(STORE(stw, %o5, %o1 + GLOBAL_SPARE)) + EX_LD(LOAD(lduw, %o1, %o5), NG2_retl_o2_plus_4) + EX_ST(STORE(stw, %o5, %o1 + GLOBAL_SPARE), NG2_retl_o2_plus_4) add %o1, 0x4, %o1 1: cmp %o2, 0 be,pt %XCC, 85f @@ -460,8 +522,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ sub %o2, %g1, %o2 1: subcc %g1, 1, %g1 - EX_LD(LOAD(ldub, %o1, %o5)) - EX_ST(STORE(stb, %o5, %o1 + GLOBAL_SPARE)) + EX_LD(LOAD(ldub, %o1, %o5), NG2_retl_o2_plus_g1_plus_1) + EX_ST(STORE(stb, %o5, %o1 + GLOBAL_SPARE), NG2_retl_o2_plus_g1_plus_1) bgu,pt %icc, 1b add %o1, 1, %o1 @@ -477,16 +539,16 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 8: mov 64, GLOBAL_SPARE andn %o1, 0x7, %o1 - EX_LD(LOAD(ldx, %o1, %g2)) + EX_LD(LOAD(ldx, %o1, %g2), NG2_retl_o2) sub GLOBAL_SPARE, %g1, GLOBAL_SPARE andn %o2, 0x7, %o4 sllx %g2, %g1, %g2 1: add %o1, 0x8, %o1 - EX_LD(LOAD(ldx, %o1, %g3)) + EX_LD(LOAD(ldx, %o1, %g3), NG2_retl_o2_and_7_plus_o4) subcc %o4, 0x8, %o4 srlx %g3, GLOBAL_SPARE, %o5 or %o5, %g2, %o5 - EX_ST(STORE(stx, %o5, %o0)) + EX_ST(STORE(stx, %o5, %o0), NG2_retl_o2_and_7_plus_o4_plus_8) add %o0, 0x8, %o0 bgu,pt %icc, 1b sllx %g3, %g1, %g2 @@ -506,8 +568,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 1: subcc %o2, 4, %o2 - EX_LD(LOAD(lduw, %o1, %g1)) - EX_ST(STORE(stw, %g1, %o1 + GLOBAL_SPARE)) + EX_LD(LOAD(lduw, %o1, %g1), NG2_retl_o2_plus_4) + EX_ST(STORE(stw, %g1, %o1 + GLOBAL_SPARE), NG2_retl_o2_plus_4) bgu,pt %XCC, 1b add %o1, 4, %o1 @@ -517,8 +579,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ .align 32 90: subcc %o2, 1, %o2 - EX_LD(LOAD(ldub, %o1, %g1)) - EX_ST(STORE(stb, %g1, %o1 + GLOBAL_SPARE)) + EX_LD(LOAD(ldub, %o1, %g1), NG2_retl_o2_plus_1) + EX_ST(STORE(stb, %g1, %o1 + GLOBAL_SPARE), NG2_retl_o2_plus_1) bgu,pt %XCC, 90b add %o1, 1, %o1 retl -- cgit From ee841d0aff649164080e445e84885015958d8ff4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 24 Oct 2016 21:20:35 -0700 Subject: sparc64: Convert U3copy_{from,to}_user to accurate exception reporting. Report the exact number of bytes which have not been successfully copied when an exception occurs, using the running remaining length. Signed-off-by: David S. Miller --- arch/sparc/lib/U3copy_from_user.S | 8 +- arch/sparc/lib/U3copy_to_user.S | 8 +- arch/sparc/lib/U3memcpy.S | 227 ++++++++++++++++++++++++++------------ 3 files changed, 162 insertions(+), 81 deletions(-) diff --git a/arch/sparc/lib/U3copy_from_user.S b/arch/sparc/lib/U3copy_from_user.S index 1046e2b083fe..db73010a1af8 100644 --- a/arch/sparc/lib/U3copy_from_user.S +++ b/arch/sparc/lib/U3copy_from_user.S @@ -3,19 +3,19 @@ * Copyright (C) 1999, 2000, 2004 David S. Miller (davem@redhat.com) */ -#define EX_LD(x) \ +#define EX_LD(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone; \ + .word 98b, y; \ .text; \ .align 4; -#define EX_LD_FP(x) \ +#define EX_LD_FP(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone_fp;\ + .word 98b, y##_fp; \ .text; \ .align 4; diff --git a/arch/sparc/lib/U3copy_to_user.S b/arch/sparc/lib/U3copy_to_user.S index 032b0c5419b0..c4ee858e352a 100644 --- a/arch/sparc/lib/U3copy_to_user.S +++ b/arch/sparc/lib/U3copy_to_user.S @@ -3,19 +3,19 @@ * Copyright (C) 1999, 2000, 2004 David S. Miller (davem@redhat.com) */ -#define EX_ST(x) \ +#define EX_ST(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone; \ + .word 98b, y; \ .text; \ .align 4; -#define EX_ST_FP(x) \ +#define EX_ST_FP(x,y) \ 98: x; \ .section __ex_table,"a";\ .align 4; \ - .word 98b, __retl_mone_fp;\ + .word 98b, y##_fp; \ .text; \ .align 4; diff --git a/arch/sparc/lib/U3memcpy.S b/arch/sparc/lib/U3memcpy.S index 491ee69e4995..54f98706b03b 100644 --- a/arch/sparc/lib/U3memcpy.S +++ b/arch/sparc/lib/U3memcpy.S @@ -4,6 +4,7 @@ */ #ifdef __KERNEL__ +#include #include #include #define GLOBAL_SPARE %g7 @@ -22,21 +23,17 @@ #endif #ifndef EX_LD -#define EX_LD(x) x +#define EX_LD(x,y) x #endif #ifndef EX_LD_FP -#define EX_LD_FP(x) x +#define EX_LD_FP(x,y) x #endif #ifndef EX_ST -#define EX_ST(x) x +#define EX_ST(x,y) x #endif #ifndef EX_ST_FP -#define EX_ST_FP(x) x -#endif - -#ifndef EX_RETVAL -#define EX_RETVAL(x) x +#define EX_ST_FP(x,y) x #endif #ifndef LOAD @@ -77,6 +74,87 @@ */ .text +#ifndef EX_RETVAL +#define EX_RETVAL(x) x +__restore_fp: + VISExitHalf + retl + nop +ENTRY(U3_retl_o2_plus_g2_plus_g1_plus_1_fp) + add %g1, 1, %g1 + add %g2, %g1, %g2 + ba,pt %xcc, __restore_fp + add %o2, %g2, %o0 +ENDPROC(U3_retl_o2_plus_g2_plus_g1_plus_1_fp) +ENTRY(U3_retl_o2_plus_g2_fp) + ba,pt %xcc, __restore_fp + add %o2, %g2, %o0 +ENDPROC(U3_retl_o2_plus_g2_fp) +ENTRY(U3_retl_o2_plus_g2_plus_8_fp) + add %g2, 8, %g2 + ba,pt %xcc, __restore_fp + add %o2, %g2, %o0 +ENDPROC(U3_retl_o2_plus_g2_plus_8_fp) +ENTRY(U3_retl_o2) + retl + mov %o2, %o0 +ENDPROC(U3_retl_o2) +ENTRY(U3_retl_o2_plus_1) + retl + add %o2, 1, %o0 +ENDPROC(U3_retl_o2_plus_1) +ENTRY(U3_retl_o2_plus_4) + retl + add %o2, 4, %o0 +ENDPROC(U3_retl_o2_plus_4) +ENTRY(U3_retl_o2_plus_8) + retl + add %o2, 8, %o0 +ENDPROC(U3_retl_o2_plus_8) +ENTRY(U3_retl_o2_plus_g1_plus_1) + add %g1, 1, %g1 + retl + add %o2, %g1, %o0 +ENDPROC(U3_retl_o2_plus_g1_plus_1) +ENTRY(U3_retl_o2_fp) + ba,pt %xcc, __restore_fp + mov %o2, %o0 +ENDPROC(U3_retl_o2_fp) +ENTRY(U3_retl_o2_plus_o3_sll_6_plus_0x80_fp) + sll %o3, 6, %o3 + add %o3, 0x80, %o3 + ba,pt %xcc, __restore_fp + add %o2, %o3, %o0 +ENDPROC(U3_retl_o2_plus_o3_sll_6_plus_0x80_fp) +ENTRY(U3_retl_o2_plus_o3_sll_6_plus_0x40_fp) + sll %o3, 6, %o3 + add %o3, 0x40, %o3 + ba,pt %xcc, __restore_fp + add %o2, %o3, %o0 +ENDPROC(U3_retl_o2_plus_o3_sll_6_plus_0x40_fp) +ENTRY(U3_retl_o2_plus_GS_plus_0x10) + add GLOBAL_SPARE, 0x10, GLOBAL_SPARE + retl + add %o2, GLOBAL_SPARE, %o0 +ENDPROC(U3_retl_o2_plus_GS_plus_0x10) +ENTRY(U3_retl_o2_plus_GS_plus_0x08) + add GLOBAL_SPARE, 0x08, GLOBAL_SPARE + retl + add %o2, GLOBAL_SPARE, %o0 +ENDPROC(U3_retl_o2_plus_GS_plus_0x08) +ENTRY(U3_retl_o2_and_7_plus_GS) + and %o2, 7, %o2 + retl + add %o2, GLOBAL_SPARE, %o2 +ENDPROC(U3_retl_o2_and_7_plus_GS) +ENTRY(U3_retl_o2_and_7_plus_GS_plus_8) + add GLOBAL_SPARE, 8, GLOBAL_SPARE + and %o2, 7, %o2 + retl + add %o2, GLOBAL_SPARE, %o2 +ENDPROC(U3_retl_o2_and_7_plus_GS_plus_8) +#endif + .align 64 /* The cheetah's flexible spine, oversized liver, enlarged heart, @@ -126,8 +204,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ and %g2, 0x38, %g2 1: subcc %g1, 0x1, %g1 - EX_LD_FP(LOAD(ldub, %o1 + 0x00, %o3)) - EX_ST_FP(STORE(stb, %o3, %o1 + GLOBAL_SPARE)) + EX_LD_FP(LOAD(ldub, %o1 + 0x00, %o3), U3_retl_o2_plus_g2_plus_g1_plus_1) + EX_ST_FP(STORE(stb, %o3, %o1 + GLOBAL_SPARE), U3_retl_o2_plus_g2_plus_g1_plus_1) bgu,pt %XCC, 1b add %o1, 0x1, %o1 @@ -138,20 +216,20 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ be,pt %icc, 3f alignaddr %o1, %g0, %o1 - EX_LD_FP(LOAD(ldd, %o1, %f4)) -1: EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f6)) + EX_LD_FP(LOAD(ldd, %o1, %f4), U3_retl_o2_plus_g2) +1: EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f6), U3_retl_o2_plus_g2) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f4, %f6, %f0 - EX_ST_FP(STORE(std, %f0, %o0)) + EX_ST_FP(STORE(std, %f0, %o0), U3_retl_o2_plus_g2_plus_8) be,pn %icc, 3f add %o0, 0x8, %o0 - EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f4)) + EX_LD_FP(LOAD(ldd, %o1 + 0x8, %f4), U3_retl_o2_plus_g2) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f6, %f4, %f2 - EX_ST_FP(STORE(std, %f2, %o0)) + EX_ST_FP(STORE(std, %f2, %o0), U3_retl_o2_plus_g2_plus_8) bne,pt %icc, 1b add %o0, 0x8, %o0 @@ -161,25 +239,25 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ LOAD(prefetch, %o1 + 0x080, #one_read) LOAD(prefetch, %o1 + 0x0c0, #one_read) LOAD(prefetch, %o1 + 0x100, #one_read) - EX_LD_FP(LOAD(ldd, %o1 + 0x000, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x000, %f0), U3_retl_o2) LOAD(prefetch, %o1 + 0x140, #one_read) - EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2)) + EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2), U3_retl_o2) LOAD(prefetch, %o1 + 0x180, #one_read) - EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4)) + EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4), U3_retl_o2) LOAD(prefetch, %o1 + 0x1c0, #one_read) faligndata %f0, %f2, %f16 - EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6)) + EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6), U3_retl_o2) faligndata %f2, %f4, %f18 - EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8)) + EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8), U3_retl_o2) faligndata %f4, %f6, %f20 - EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10)) + EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10), U3_retl_o2) faligndata %f6, %f8, %f22 - EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12)) + EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12), U3_retl_o2) faligndata %f8, %f10, %f24 - EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14)) + EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14), U3_retl_o2) faligndata %f10, %f12, %f26 - EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0), U3_retl_o2) subcc GLOBAL_SPARE, 0x80, GLOBAL_SPARE add %o1, 0x40, %o1 @@ -190,26 +268,26 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ .align 64 1: - EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2)) + EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2), U3_retl_o2_plus_o3_sll_6_plus_0x80) faligndata %f12, %f14, %f28 - EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4)) + EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4), U3_retl_o2_plus_o3_sll_6_plus_0x80) faligndata %f14, %f0, %f30 - EX_ST_FP(STORE_BLK(%f16, %o0)) - EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6)) + EX_ST_FP(STORE_BLK(%f16, %o0), U3_retl_o2_plus_o3_sll_6_plus_0x80) + EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6), U3_retl_o2_plus_o3_sll_6_plus_0x40) faligndata %f0, %f2, %f16 add %o0, 0x40, %o0 - EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8)) + EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8), U3_retl_o2_plus_o3_sll_6_plus_0x40) faligndata %f2, %f4, %f18 - EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10)) + EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10), U3_retl_o2_plus_o3_sll_6_plus_0x40) faligndata %f4, %f6, %f20 - EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12)) + EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12), U3_retl_o2_plus_o3_sll_6_plus_0x40) subcc %o3, 0x01, %o3 faligndata %f6, %f8, %f22 - EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14)) + EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14), U3_retl_o2_plus_o3_sll_6_plus_0x80) faligndata %f8, %f10, %f24 - EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0), U3_retl_o2_plus_o3_sll_6_plus_0x80) LOAD(prefetch, %o1 + 0x1c0, #one_read) faligndata %f10, %f12, %f26 bg,pt %XCC, 1b @@ -217,29 +295,29 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ /* Finally we copy the last full 64-byte block. */ 2: - EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2)) + EX_LD_FP(LOAD(ldd, %o1 + 0x008, %f2), U3_retl_o2_plus_o3_sll_6_plus_0x80) faligndata %f12, %f14, %f28 - EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4)) + EX_LD_FP(LOAD(ldd, %o1 + 0x010, %f4), U3_retl_o2_plus_o3_sll_6_plus_0x80) faligndata %f14, %f0, %f30 - EX_ST_FP(STORE_BLK(%f16, %o0)) - EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6)) + EX_ST_FP(STORE_BLK(%f16, %o0), U3_retl_o2_plus_o3_sll_6_plus_0x80) + EX_LD_FP(LOAD(ldd, %o1 + 0x018, %f6), U3_retl_o2_plus_o3_sll_6_plus_0x40) faligndata %f0, %f2, %f16 - EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8)) + EX_LD_FP(LOAD(ldd, %o1 + 0x020, %f8), U3_retl_o2_plus_o3_sll_6_plus_0x40) faligndata %f2, %f4, %f18 - EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10)) + EX_LD_FP(LOAD(ldd, %o1 + 0x028, %f10), U3_retl_o2_plus_o3_sll_6_plus_0x40) faligndata %f4, %f6, %f20 - EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12)) + EX_LD_FP(LOAD(ldd, %o1 + 0x030, %f12), U3_retl_o2_plus_o3_sll_6_plus_0x40) faligndata %f6, %f8, %f22 - EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14)) + EX_LD_FP(LOAD(ldd, %o1 + 0x038, %f14), U3_retl_o2_plus_o3_sll_6_plus_0x40) faligndata %f8, %f10, %f24 cmp %g1, 0 be,pt %XCC, 1f add %o0, 0x40, %o0 - EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x040, %f0), U3_retl_o2_plus_o3_sll_6_plus_0x40) 1: faligndata %f10, %f12, %f26 faligndata %f12, %f14, %f28 faligndata %f14, %f0, %f30 - EX_ST_FP(STORE_BLK(%f16, %o0)) + EX_ST_FP(STORE_BLK(%f16, %o0), U3_retl_o2_plus_o3_sll_6_plus_0x40) add %o0, 0x40, %o0 add %o1, 0x40, %o1 membar #Sync @@ -259,20 +337,20 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ sub %o2, %g2, %o2 be,a,pt %XCC, 1f - EX_LD_FP(LOAD(ldd, %o1 + 0x00, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x00, %f0), U3_retl_o2_plus_g2) -1: EX_LD_FP(LOAD(ldd, %o1 + 0x08, %f2)) +1: EX_LD_FP(LOAD(ldd, %o1 + 0x08, %f2), U3_retl_o2_plus_g2) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f0, %f2, %f8 - EX_ST_FP(STORE(std, %f8, %o0)) + EX_ST_FP(STORE(std, %f8, %o0), U3_retl_o2_plus_g2_plus_8) be,pn %XCC, 2f add %o0, 0x8, %o0 - EX_LD_FP(LOAD(ldd, %o1 + 0x08, %f0)) + EX_LD_FP(LOAD(ldd, %o1 + 0x08, %f0), U3_retl_o2_plus_g2) add %o1, 0x8, %o1 subcc %g2, 0x8, %g2 faligndata %f2, %f0, %f8 - EX_ST_FP(STORE(std, %f8, %o0)) + EX_ST_FP(STORE(std, %f8, %o0), U3_retl_o2_plus_g2_plus_8) bne,pn %XCC, 1b add %o0, 0x8, %o0 @@ -292,30 +370,33 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ andcc %o2, 0x8, %g0 be,pt %icc, 1f nop - EX_LD(LOAD(ldx, %o1, %o5)) - EX_ST(STORE(stx, %o5, %o1 + %o3)) + EX_LD(LOAD(ldx, %o1, %o5), U3_retl_o2) + EX_ST(STORE(stx, %o5, %o1 + %o3), U3_retl_o2) add %o1, 0x8, %o1 + sub %o2, 8, %o2 1: andcc %o2, 0x4, %g0 be,pt %icc, 1f nop - EX_LD(LOAD(lduw, %o1, %o5)) - EX_ST(STORE(stw, %o5, %o1 + %o3)) + EX_LD(LOAD(lduw, %o1, %o5), U3_retl_o2) + EX_ST(STORE(stw, %o5, %o1 + %o3), U3_retl_o2) add %o1, 0x4, %o1 + sub %o2, 4, %o2 1: andcc %o2, 0x2, %g0 be,pt %icc, 1f nop - EX_LD(LOAD(lduh, %o1, %o5)) - EX_ST(STORE(sth, %o5, %o1 + %o3)) + EX_LD(LOAD(lduh, %o1, %o5), U3_retl_o2) + EX_ST(STORE(sth, %o5, %o1 + %o3), U3_retl_o2) add %o1, 0x2, %o1 + sub %o2, 2, %o2 1: andcc %o2, 0x1, %g0 be,pt %icc, 85f nop - EX_LD(LOAD(ldub, %o1, %o5)) + EX_LD(LOAD(ldub, %o1, %o5), U3_retl_o2) ba,pt %xcc, 85f - EX_ST(STORE(stb, %o5, %o1 + %o3)) + EX_ST(STORE(stb, %o5, %o1 + %o3), U3_retl_o2) .align 64 70: /* 16 < len <= 64 */ @@ -326,26 +407,26 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ andn %o2, 0xf, GLOBAL_SPARE and %o2, 0xf, %o2 1: subcc GLOBAL_SPARE, 0x10, GLOBAL_SPARE - EX_LD(LOAD(ldx, %o1 + 0x00, %o5)) - EX_LD(LOAD(ldx, %o1 + 0x08, %g1)) - EX_ST(STORE(stx, %o5, %o1 + %o3)) + EX_LD(LOAD(ldx, %o1 + 0x00, %o5), U3_retl_o2_plus_GS_plus_0x10) + EX_LD(LOAD(ldx, %o1 + 0x08, %g1), U3_retl_o2_plus_GS_plus_0x10) + EX_ST(STORE(stx, %o5, %o1 + %o3), U3_retl_o2_plus_GS_plus_0x10) add %o1, 0x8, %o1 - EX_ST(STORE(stx, %g1, %o1 + %o3)) + EX_ST(STORE(stx, %g1, %o1 + %o3), U3_retl_o2_plus_GS_plus_0x08) bgu,pt %XCC, 1b add %o1, 0x8, %o1 73: andcc %o2, 0x8, %g0 be,pt %XCC, 1f nop sub %o2, 0x8, %o2 - EX_LD(LOAD(ldx, %o1, %o5)) - EX_ST(STORE(stx, %o5, %o1 + %o3)) + EX_LD(LOAD(ldx, %o1, %o5), U3_retl_o2_plus_8) + EX_ST(STORE(stx, %o5, %o1 + %o3), U3_retl_o2_plus_8) add %o1, 0x8, %o1 1: andcc %o2, 0x4, %g0 be,pt %XCC, 1f nop sub %o2, 0x4, %o2 - EX_LD(LOAD(lduw, %o1, %o5)) - EX_ST(STORE(stw, %o5, %o1 + %o3)) + EX_LD(LOAD(lduw, %o1, %o5), U3_retl_o2_plus_4) + EX_ST(STORE(stw, %o5, %o1 + %o3), U3_retl_o2_plus_4) add %o1, 0x4, %o1 1: cmp %o2, 0 be,pt %XCC, 85f @@ -361,8 +442,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ sub %o2, %g1, %o2 1: subcc %g1, 1, %g1 - EX_LD(LOAD(ldub, %o1, %o5)) - EX_ST(STORE(stb, %o5, %o1 + %o3)) + EX_LD(LOAD(ldub, %o1, %o5), U3_retl_o2_plus_g1_plus_1) + EX_ST(STORE(stb, %o5, %o1 + %o3), U3_retl_o2_plus_g1_plus_1) bgu,pt %icc, 1b add %o1, 1, %o1 @@ -378,16 +459,16 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 8: mov 64, %o3 andn %o1, 0x7, %o1 - EX_LD(LOAD(ldx, %o1, %g2)) + EX_LD(LOAD(ldx, %o1, %g2), U3_retl_o2) sub %o3, %g1, %o3 andn %o2, 0x7, GLOBAL_SPARE sllx %g2, %g1, %g2 -1: EX_LD(LOAD(ldx, %o1 + 0x8, %g3)) +1: EX_LD(LOAD(ldx, %o1 + 0x8, %g3), U3_retl_o2_and_7_plus_GS) subcc GLOBAL_SPARE, 0x8, GLOBAL_SPARE add %o1, 0x8, %o1 srlx %g3, %o3, %o5 or %o5, %g2, %o5 - EX_ST(STORE(stx, %o5, %o0)) + EX_ST(STORE(stx, %o5, %o0), U3_retl_o2_and_7_plus_GS_plus_8) add %o0, 0x8, %o0 bgu,pt %icc, 1b sllx %g3, %g1, %g2 @@ -407,8 +488,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ 1: subcc %o2, 4, %o2 - EX_LD(LOAD(lduw, %o1, %g1)) - EX_ST(STORE(stw, %g1, %o1 + %o3)) + EX_LD(LOAD(lduw, %o1, %g1), U3_retl_o2_plus_4) + EX_ST(STORE(stw, %g1, %o1 + %o3), U3_retl_o2_plus_4) bgu,pt %XCC, 1b add %o1, 4, %o1 @@ -418,8 +499,8 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ .align 32 90: subcc %o2, 1, %o2 - EX_LD(LOAD(ldub, %o1, %g1)) - EX_ST(STORE(stb, %g1, %o1 + %o3)) + EX_LD(LOAD(ldub, %o1, %g1), U3_retl_o2_plus_1) + EX_ST(STORE(stb, %g1, %o1 + %o3), U3_retl_o2_plus_1) bgu,pt %XCC, 90b add %o1, 1, %o1 retl -- cgit From 614da3d9685b67917cab48c8452fd8bf93de0867 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 24 Oct 2016 21:22:27 -0700 Subject: sparc64: Delete now unused user copy assembler helpers. All of __ret{,l}_mone{_asi,_fp,_asi_fpu} are now unused. Signed-off-by: David S. Miller --- arch/sparc/kernel/head_64.S | 30 ------------------------------ 1 file changed, 30 deletions(-) diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S index 5f17de6b5fc3..6aa3da152c20 100644 --- a/arch/sparc/kernel/head_64.S +++ b/arch/sparc/kernel/head_64.S @@ -931,36 +931,6 @@ ENTRY(__retl_efault) mov -EFAULT, %o0 ENDPROC(__retl_efault) -ENTRY(__retl_mone) - retl - mov -1, %o0 -ENDPROC(__retl_mone) - -ENTRY(__retl_mone_fp) - VISExitHalf - retl - mov 1, %o0 -ENDPROC(__retl_mone_fp) - -ENTRY(__ret_mone_asi) - wr %g0, ASI_AIUS, %asi - ret - restore %g0, 1, %o0 -ENDPROC(__ret_mone_asi) - -ENTRY(__retl_mone_asi) - wr %g0, ASI_AIUS, %asi - retl - mov 1, %o0 -ENDPROC(__retl_mone_asi) - -ENTRY(__retl_mone_asi_fp) - wr %g0, ASI_AIUS, %asi - VISExitHalf - retl - mov 1, %o0 -ENDPROC(__retl_mone_asi_fp) - ENTRY(__retl_o1) retl mov %o1, %o0 -- cgit From 0fd0ff01d4c3c01e7fe69b762ee1a13236639acc Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 24 Oct 2016 21:25:31 -0700 Subject: sparc64: Delete now unused user copy fixup functions. Now that all of the user copy routines are converted to return accurate residual lengths when an exception occurs, we no longer need the broken fixup routines. Signed-off-by: David S. Miller --- arch/sparc/include/asm/uaccess_64.h | 36 ++----------------- arch/sparc/lib/Makefile | 2 +- arch/sparc/lib/user_fixup.c | 71 ------------------------------------- 3 files changed, 4 insertions(+), 105 deletions(-) delete mode 100644 arch/sparc/lib/user_fixup.c diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h index 0244012435c8..5373136c412b 100644 --- a/arch/sparc/include/asm/uaccess_64.h +++ b/arch/sparc/include/asm/uaccess_64.h @@ -188,64 +188,34 @@ int __get_user_bad(void); unsigned long __must_check ___copy_from_user(void *to, const void __user *from, unsigned long size); -unsigned long copy_from_user_fixup(void *to, const void __user *from, - unsigned long size); static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long size) { - unsigned long ret; - check_object_size(to, size, false); - ret = ___copy_from_user(to, from, size); - if (unlikely(ret)) { - if ((long)ret < 0) - ret = copy_from_user_fixup(to, from, size); - return ret; - } - - return ret; + return ___copy_from_user(to, from, size); } #define __copy_from_user copy_from_user unsigned long __must_check ___copy_to_user(void __user *to, const void *from, unsigned long size); -unsigned long copy_to_user_fixup(void __user *to, const void *from, - unsigned long size); static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long size) { - unsigned long ret; - check_object_size(from, size, true); - ret = ___copy_to_user(to, from, size); - if (unlikely(ret)) { - if ((long)ret < 0) - ret = copy_to_user_fixup(to, from, size); - return ret; - } - return ret; + return ___copy_to_user(to, from, size); } #define __copy_to_user copy_to_user unsigned long __must_check ___copy_in_user(void __user *to, const void __user *from, unsigned long size); -unsigned long copy_in_user_fixup(void __user *to, void __user *from, - unsigned long size); static inline unsigned long __must_check copy_in_user(void __user *to, void __user *from, unsigned long size) { - unsigned long ret = ___copy_in_user(to, from, size); - - if (unlikely(ret)) { - if ((long)ret < 0) - ret = copy_in_user_fixup(to, from, size); - return ret; - } - return ret; + return ___copy_in_user(to, from, size); } #define __copy_in_user copy_in_user diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile index 885f00e81d1a..69912d2f8b54 100644 --- a/arch/sparc/lib/Makefile +++ b/arch/sparc/lib/Makefile @@ -38,7 +38,7 @@ lib-$(CONFIG_SPARC64) += NG4patch.o NG4copy_page.o NG4clear_page.o NG4memset.o lib-$(CONFIG_SPARC64) += GENmemcpy.o GENcopy_from_user.o GENcopy_to_user.o lib-$(CONFIG_SPARC64) += GENpatch.o GENpage.o GENbzero.o -lib-$(CONFIG_SPARC64) += copy_in_user.o user_fixup.o memmove.o +lib-$(CONFIG_SPARC64) += copy_in_user.o memmove.o lib-$(CONFIG_SPARC64) += mcount.o ipcsum.o xor.o hweight.o ffs.o obj-$(CONFIG_SPARC64) += iomap.o diff --git a/arch/sparc/lib/user_fixup.c b/arch/sparc/lib/user_fixup.c deleted file mode 100644 index ac96ae236709..000000000000 --- a/arch/sparc/lib/user_fixup.c +++ /dev/null @@ -1,71 +0,0 @@ -/* user_fixup.c: Fix up user copy faults. - * - * Copyright (C) 2004 David S. Miller - */ - -#include -#include -#include -#include -#include - -#include - -/* Calculating the exact fault address when using - * block loads and stores can be very complicated. - * - * Instead of trying to be clever and handling all - * of the cases, just fix things up simply here. - */ - -static unsigned long compute_size(unsigned long start, unsigned long size, unsigned long *offset) -{ - unsigned long fault_addr = current_thread_info()->fault_address; - unsigned long end = start + size; - - if (fault_addr < start || fault_addr >= end) { - *offset = 0; - } else { - *offset = fault_addr - start; - size = end - fault_addr; - } - return size; -} - -unsigned long copy_from_user_fixup(void *to, const void __user *from, unsigned long size) -{ - unsigned long offset; - - size = compute_size((unsigned long) from, size, &offset); - if (likely(size)) - memset(to + offset, 0, size); - - return size; -} -EXPORT_SYMBOL(copy_from_user_fixup); - -unsigned long copy_to_user_fixup(void __user *to, const void *from, unsigned long size) -{ - unsigned long offset; - - return compute_size((unsigned long) to, size, &offset); -} -EXPORT_SYMBOL(copy_to_user_fixup); - -unsigned long copy_in_user_fixup(void __user *to, void __user *from, unsigned long size) -{ - unsigned long fault_addr = current_thread_info()->fault_address; - unsigned long start = (unsigned long) to; - unsigned long end = start + size; - - if (fault_addr >= start && fault_addr < end) - return end - fault_addr; - - start = (unsigned long) from; - end = start + size; - if (fault_addr >= start && fault_addr < end) - return end - fault_addr; - - return size; -} -EXPORT_SYMBOL(copy_in_user_fixup); -- cgit From 45c7a4908a307a023e237a64a3eadcafc4836493 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Fri, 21 Oct 2016 19:57:57 +0900 Subject: mmc: dw_mmc-pltfm: fix the potential NULL pointer dereference platform_get_resource can be returned the NULL pointer. Then regs->start should be referred to NULL Pointer. devm_ioremap_resource() checks whether res is NULL or not. Signed-off-by: Jaehoon Chung Reviewed-by: Shawn Lin Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/dw_mmc-pltfm.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c index c0bb0c793e84..dbbc4303bdd0 100644 --- a/drivers/mmc/host/dw_mmc-pltfm.c +++ b/drivers/mmc/host/dw_mmc-pltfm.c @@ -46,12 +46,13 @@ int dw_mci_pltfm_register(struct platform_device *pdev, host->pdata = pdev->dev.platform_data; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - /* Get registers' physical base address */ - host->phy_regs = regs->start; host->regs = devm_ioremap_resource(&pdev->dev, regs); if (IS_ERR(host->regs)) return PTR_ERR(host->regs); + /* Get registers' physical base address */ + host->phy_regs = regs->start; + platform_set_drvdata(pdev, host); return dw_mci_probe(host); } -- cgit From 34eee70a7b82b09dbda4cb453e0e21d460dae226 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 24 Oct 2016 17:22:01 +0200 Subject: staging: iio: ad5933: avoid uninitialized variable in error case The ad5933_i2c_read function returns an error code to indicate whether it could read data or not. However ad5933_work() ignores this return code and just accesses the data unconditionally, which gets detected by gcc as a possible bug: drivers/staging/iio/impedance-analyzer/ad5933.c: In function 'ad5933_work': drivers/staging/iio/impedance-analyzer/ad5933.c:649:16: warning: 'status' may be used uninitialized in this function [-Wmaybe-uninitialized] This adds minimal error handling so we only evaluate the data if it was correctly read. Link: https://patchwork.kernel.org/patch/8110281/ Signed-off-by: Arnd Bergmann Acked-by: Lars-Peter Clausen Cc: Signed-off-by: Jonathan Cameron --- drivers/staging/iio/impedance-analyzer/ad5933.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c index 5eecf1cb1028..3892a7470410 100644 --- a/drivers/staging/iio/impedance-analyzer/ad5933.c +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c @@ -655,6 +655,7 @@ static void ad5933_work(struct work_struct *work) __be16 buf[2]; int val[2]; unsigned char status; + int ret; mutex_lock(&indio_dev->mlock); if (st->state == AD5933_CTRL_INIT_START_FREQ) { @@ -662,19 +663,22 @@ static void ad5933_work(struct work_struct *work) ad5933_cmd(st, AD5933_CTRL_START_SWEEP); st->state = AD5933_CTRL_START_SWEEP; schedule_delayed_work(&st->work, st->poll_time_jiffies); - mutex_unlock(&indio_dev->mlock); - return; + goto out; } - ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &status); + ret = ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &status); + if (ret) + goto out; if (status & AD5933_STAT_DATA_VALID) { int scan_count = bitmap_weight(indio_dev->active_scan_mask, indio_dev->masklength); - ad5933_i2c_read(st->client, + ret = ad5933_i2c_read(st->client, test_bit(1, indio_dev->active_scan_mask) ? AD5933_REG_REAL_DATA : AD5933_REG_IMAG_DATA, scan_count * 2, (u8 *)buf); + if (ret) + goto out; if (scan_count == 2) { val[0] = be16_to_cpu(buf[0]); @@ -686,8 +690,7 @@ static void ad5933_work(struct work_struct *work) } else { /* no data available - try again later */ schedule_delayed_work(&st->work, st->poll_time_jiffies); - mutex_unlock(&indio_dev->mlock); - return; + goto out; } if (status & AD5933_STAT_SWEEP_DONE) { @@ -700,7 +703,7 @@ static void ad5933_work(struct work_struct *work) ad5933_cmd(st, AD5933_CTRL_INC_FREQ); schedule_delayed_work(&st->work, st->poll_time_jiffies); } - +out: mutex_unlock(&indio_dev->mlock); } -- cgit From ef6239e0cf5e665e7b20fd659678b98331b3081d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 25 Oct 2016 09:37:37 -0400 Subject: drm/amdgpu/vce3: only enable 3 rings on new enough firmware (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Older firmware versions don't support 3 rings. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=98016 v2: use define for fw version Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/vce_v3_0.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c index 8533269ec160..6feed726e299 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c @@ -52,6 +52,8 @@ #define VCE_V3_0_STACK_SIZE (64 * 1024) #define VCE_V3_0_DATA_SIZE ((16 * 1024 * AMDGPU_MAX_VCE_HANDLES) + (52 * 1024)) +#define FW_52_8_3 ((52 << 24) | (8 << 16) | (3 << 8)) + static void vce_v3_0_mc_resume(struct amdgpu_device *adev, int idx); static void vce_v3_0_set_ring_funcs(struct amdgpu_device *adev); static void vce_v3_0_set_irq_funcs(struct amdgpu_device *adev); @@ -382,6 +384,10 @@ static int vce_v3_0_sw_init(void *handle) if (r) return r; + /* 52.8.3 required for 3 ring support */ + if (adev->vce.fw_version < FW_52_8_3) + adev->vce.num_rings = 2; + r = amdgpu_vce_resume(adev); if (r) return r; -- cgit From 537b4b462caa8bfb9726d9695b8e56e2d5e6b41e Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 24 Oct 2016 23:32:04 +0200 Subject: drm/radeon: drop register readback in cayman_cp_int_cntl_setup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The read is taking a considerable amount of time (about 50us on this machine). The register does not ever hold anything other than the ring ID that is updated in this exact function, so there is no need for the read modify write cycle. This chops off a big chunk of the time spent in hardirq disabled context, as this function is called multiple times in the interrupt handler. With this change applied radeon won't show up in the list of the worst IRQ latency offenders anymore, where it was a regular before. Reviewed-by: Christian König Signed-off-by: Lucas Stach Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/ni.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 103fc8650197..a0d4a0522fdc 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1396,9 +1396,7 @@ static void cayman_pcie_gart_fini(struct radeon_device *rdev) void cayman_cp_int_cntl_setup(struct radeon_device *rdev, int ring, u32 cp_int_cntl) { - u32 srbm_gfx_cntl = RREG32(SRBM_GFX_CNTL) & ~3; - - WREG32(SRBM_GFX_CNTL, srbm_gfx_cntl | (ring & 3)); + WREG32(SRBM_GFX_CNTL, RINGID(ring)); WREG32(CP_INT_CNTL, cp_int_cntl); } -- cgit From b429ae4d5b565a71dfffd759dfcd4f6c093ced94 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 25 Oct 2016 16:23:26 -0700 Subject: sparc64: Fix illegal relative branches in hypervisor patched TLB code. When we copy code over to patch another piece of code, we can only use PC-relative branches that target code within that piece of code. Such PC-relative branches cannot be made to external symbols because the patch moves the location of the code and thus modifies the relative address of external symbols. Use an absolute jmpl to fix this problem. Signed-off-by: David S. Miller --- arch/sparc/mm/ultra.S | 65 ++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 51 insertions(+), 14 deletions(-) diff --git a/arch/sparc/mm/ultra.S b/arch/sparc/mm/ultra.S index b4f4733abc6e..85de139bfad6 100644 --- a/arch/sparc/mm/ultra.S +++ b/arch/sparc/mm/ultra.S @@ -30,7 +30,7 @@ .text .align 32 .globl __flush_tlb_mm -__flush_tlb_mm: /* 18 insns */ +__flush_tlb_mm: /* 19 insns */ /* %o0=(ctx & TAG_CONTEXT_BITS), %o1=SECONDARY_CONTEXT */ ldxa [%o1] ASI_DMMU, %g2 cmp %g2, %o0 @@ -81,7 +81,7 @@ __flush_tlb_page: /* 22 insns */ .align 32 .globl __flush_tlb_pending -__flush_tlb_pending: /* 26 insns */ +__flush_tlb_pending: /* 27 insns */ /* %o0 = context, %o1 = nr, %o2 = vaddrs[] */ rdpr %pstate, %g7 sllx %o1, 3, %o1 @@ -113,7 +113,7 @@ __flush_tlb_pending: /* 26 insns */ .align 32 .globl __flush_tlb_kernel_range -__flush_tlb_kernel_range: /* 16 insns */ +__flush_tlb_kernel_range: /* 19 insns */ /* %o0=start, %o1=end */ cmp %o0, %o1 be,pn %xcc, 2f @@ -131,6 +131,9 @@ __flush_tlb_kernel_range: /* 16 insns */ retl nop nop + nop + nop + nop __spitfire_flush_tlb_mm_slow: rdpr %pstate, %g1 @@ -309,19 +312,28 @@ __hypervisor_tlb_tl0_error: ret restore -__hypervisor_flush_tlb_mm: /* 10 insns */ +__hypervisor_flush_tlb_mm: /* 19 insns */ mov %o0, %o2 /* ARG2: mmu context */ mov 0, %o0 /* ARG0: CPU lists unimplemented */ mov 0, %o1 /* ARG1: CPU lists unimplemented */ mov HV_MMU_ALL, %o3 /* ARG3: flags */ mov HV_FAST_MMU_DEMAP_CTX, %o5 ta HV_FAST_TRAP - brnz,pn %o0, __hypervisor_tlb_tl0_error + brnz,pn %o0, 1f mov HV_FAST_MMU_DEMAP_CTX, %o1 retl nop +1: sethi %hi(__hypervisor_tlb_tl0_error), %o5 + jmpl %o5 + %lo(__hypervisor_tlb_tl0_error), %g0 + nop + nop + nop + nop + nop + nop + nop -__hypervisor_flush_tlb_page: /* 11 insns */ +__hypervisor_flush_tlb_page: /* 22 insns */ /* %o0 = context, %o1 = vaddr */ mov %o0, %g2 mov %o1, %o0 /* ARG0: vaddr + IMMU-bit */ @@ -330,10 +342,21 @@ __hypervisor_flush_tlb_page: /* 11 insns */ srlx %o0, PAGE_SHIFT, %o0 sllx %o0, PAGE_SHIFT, %o0 ta HV_MMU_UNMAP_ADDR_TRAP - brnz,pn %o0, __hypervisor_tlb_tl0_error + brnz,pn %o0, 1f mov HV_MMU_UNMAP_ADDR_TRAP, %o1 retl nop +1: sethi %hi(__hypervisor_tlb_tl0_error), %o2 + jmpl %o2 + %lo(__hypervisor_tlb_tl0_error), %g0 + nop + nop + nop + nop + nop + nop + nop + nop + nop __hypervisor_flush_tlb_pending: /* 16 insns */ /* %o0 = context, %o1 = nr, %o2 = vaddrs[] */ @@ -347,14 +370,25 @@ __hypervisor_flush_tlb_pending: /* 16 insns */ srlx %o0, PAGE_SHIFT, %o0 sllx %o0, PAGE_SHIFT, %o0 ta HV_MMU_UNMAP_ADDR_TRAP - brnz,pn %o0, __hypervisor_tlb_tl0_error + brnz,pn %o0, 1f mov HV_MMU_UNMAP_ADDR_TRAP, %o1 brnz,pt %g1, 1b nop retl nop +1: sethi %hi(__hypervisor_tlb_tl0_error), %o2 + jmpl %o2 + %lo(__hypervisor_tlb_tl0_error), %g0 + nop + nop + nop + nop + nop + nop + nop + nop + nop -__hypervisor_flush_tlb_kernel_range: /* 16 insns */ +__hypervisor_flush_tlb_kernel_range: /* 19 insns */ /* %o0=start, %o1=end */ cmp %o0, %o1 be,pn %xcc, 2f @@ -366,12 +400,15 @@ __hypervisor_flush_tlb_kernel_range: /* 16 insns */ mov 0, %o1 /* ARG1: mmu context */ mov HV_MMU_ALL, %o2 /* ARG2: flags */ ta HV_MMU_UNMAP_ADDR_TRAP - brnz,pn %o0, __hypervisor_tlb_tl0_error + brnz,pn %o0, 3f mov HV_MMU_UNMAP_ADDR_TRAP, %o1 brnz,pt %g2, 1b sub %g2, %g3, %g2 2: retl nop +3: sethi %hi(__hypervisor_tlb_tl0_error), %o2 + jmpl %o2 + %lo(__hypervisor_tlb_tl0_error), %g0 + nop #ifdef DCACHE_ALIASING_POSSIBLE /* XXX Niagara and friends have an 8K cache, so no aliasing is @@ -819,28 +856,28 @@ hypervisor_patch_cachetlbops: sethi %hi(__hypervisor_flush_tlb_mm), %o1 or %o1, %lo(__hypervisor_flush_tlb_mm), %o1 call tlb_patch_one - mov 10, %o2 + mov 19, %o2 sethi %hi(__flush_tlb_page), %o0 or %o0, %lo(__flush_tlb_page), %o0 sethi %hi(__hypervisor_flush_tlb_page), %o1 or %o1, %lo(__hypervisor_flush_tlb_page), %o1 call tlb_patch_one - mov 11, %o2 + mov 22, %o2 sethi %hi(__flush_tlb_pending), %o0 or %o0, %lo(__flush_tlb_pending), %o0 sethi %hi(__hypervisor_flush_tlb_pending), %o1 or %o1, %lo(__hypervisor_flush_tlb_pending), %o1 call tlb_patch_one - mov 16, %o2 + mov 27, %o2 sethi %hi(__flush_tlb_kernel_range), %o0 or %o0, %lo(__flush_tlb_kernel_range), %o0 sethi %hi(__hypervisor_flush_tlb_kernel_range), %o1 or %o1, %lo(__hypervisor_flush_tlb_kernel_range), %o1 call tlb_patch_one - mov 16, %o2 + mov 19, %o2 #ifdef DCACHE_ALIASING_POSSIBLE sethi %hi(__flush_dcache_page), %o0 -- cgit From 9d9fa230206a3aea6ef451646c97122f04777983 Mon Sep 17 00:00:00 2001 From: James Clarke Date: Mon, 24 Oct 2016 19:49:25 +0100 Subject: sparc: Handle negative offsets in arch_jump_label_transform Additionally, if the offset will overflow the immediate for a ba,pt instruction, fall back on a standard ba to get an extra 3 bits. Signed-off-by: James Clarke Signed-off-by: David S. Miller --- arch/sparc/kernel/jump_label.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/arch/sparc/kernel/jump_label.c b/arch/sparc/kernel/jump_label.c index 59bbeff55024..07933b9e9ce0 100644 --- a/arch/sparc/kernel/jump_label.c +++ b/arch/sparc/kernel/jump_label.c @@ -13,19 +13,30 @@ void arch_jump_label_transform(struct jump_entry *entry, enum jump_label_type type) { - u32 val; u32 *insn = (u32 *) (unsigned long) entry->code; + u32 val; if (type == JUMP_LABEL_JMP) { s32 off = (s32)entry->target - (s32)entry->code; + bool use_v9_branch = false; + + BUG_ON(off & 3); #ifdef CONFIG_SPARC64 - /* ba,pt %xcc, . + (off << 2) */ - val = 0x10680000 | ((u32) off >> 2); -#else - /* ba . + (off << 2) */ - val = 0x10800000 | ((u32) off >> 2); + if (off <= 0xfffff && off >= -0x100000) + use_v9_branch = true; #endif + if (use_v9_branch) { + /* WDISP19 - target is . + immed << 2 */ + /* ba,pt %xcc, . + off */ + val = 0x10680000 | (((u32) off >> 2) & 0x7ffff); + } else { + /* WDISP22 - target is . + immed << 2 */ + BUG_ON(off > 0x7fffff); + BUG_ON(off < -0x800000); + /* ba . + off */ + val = 0x10800000 | (((u32) off >> 2) & 0x3fffff); + } } else { val = 0x01000000; } -- cgit From 849c498766060a16aad5b0e0d03206726e7d2fa4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 25 Oct 2016 19:43:17 -0700 Subject: sparc64: Handle extremely large kernel TSB range flushes sanely. If the number of pages we are flushing is more than twice the number of entries in the TSB, just scan the TSB table for matches rather than probing each and every page in the range. Based upon a patch and report by James Clarke. Signed-off-by: David S. Miller --- arch/sparc/mm/tsb.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/sparc/mm/tsb.c b/arch/sparc/mm/tsb.c index f2b77112e9d8..e20fbbafb0b0 100644 --- a/arch/sparc/mm/tsb.c +++ b/arch/sparc/mm/tsb.c @@ -27,6 +27,20 @@ static inline int tag_compare(unsigned long tag, unsigned long vaddr) return (tag == (vaddr >> 22)); } +static void flush_tsb_kernel_range_scan(unsigned long start, unsigned long end) +{ + unsigned long idx; + + for (idx = 0; idx < KERNEL_TSB_NENTRIES; idx++) { + struct tsb *ent = &swapper_tsb[idx]; + unsigned long match = idx << 13; + + match |= (ent->tag << 22); + if (match >= start && match < end) + ent->tag = (1UL << TSB_TAG_INVALID_BIT); + } +} + /* TSB flushes need only occur on the processor initiating the address * space modification, not on each cpu the address space has run on. * Only the TLB flush needs that treatment. @@ -36,6 +50,9 @@ void flush_tsb_kernel_range(unsigned long start, unsigned long end) { unsigned long v; + if ((end - start) >> PAGE_SHIFT >= 2 * KERNEL_TSB_NENTRIES) + return flush_tsb_kernel_range_scan(start, end); + for (v = start; v < end; v += PAGE_SIZE) { unsigned long hash = tsb_hash(v, PAGE_SHIFT, KERNEL_TSB_NENTRIES); -- cgit From cac5fcedaabdadf150c8a9be9fee76defc8ba444 Mon Sep 17 00:00:00 2001 From: Felix Monninger Date: Tue, 25 Oct 2016 22:28:08 +0100 Subject: drm: Release reference from blob lookup after replacing property MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drm_property_lookup_blob() returns a reference to the returned blob, and drm_atomic_replace_property_blob() takes a references to the blob it stores, so afterwards we are left owning a reference to the new_blob that we never release, and thus leak memory every time we update a property such as during drm_atomic_helper_legacy_gamma_set(). v2: update credentials, drm_property_unreference_blob() is NULL safe and NULL is passed consistently to it throughout drm_atomic.c so do so here. Reported-by: Felix Monninger Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98420 Signed-off-by: Felix Monninger Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Fixes: 5488dc16fde7 ("drm: introduce pipe color correction properties") Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161025212808.3908-1-chris@chris-wilson.co.uk --- drivers/gpu/drm/drm_atomic.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index 23739609427d..e6862a744210 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -420,18 +420,21 @@ drm_atomic_replace_property_blob_from_id(struct drm_crtc *crtc, ssize_t expected_size, bool *replaced) { - struct drm_device *dev = crtc->dev; struct drm_property_blob *new_blob = NULL; if (blob_id != 0) { - new_blob = drm_property_lookup_blob(dev, blob_id); + new_blob = drm_property_lookup_blob(crtc->dev, blob_id); if (new_blob == NULL) return -EINVAL; - if (expected_size > 0 && expected_size != new_blob->length) + + if (expected_size > 0 && expected_size != new_blob->length) { + drm_property_unreference_blob(new_blob); return -EINVAL; + } } drm_atomic_replace_property_blob(blob, new_blob, replaced); + drm_property_unreference_blob(new_blob); return 0; } -- cgit From 87d3b6588f9bf205902868d3e5baf68e37ad4ae1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 20 Oct 2016 17:05:30 +0200 Subject: drm/fb-helper: Don't call dirty callback for untouched clips MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since 4.7 kernel, we've seen the error messages like kernel: [TTM] Buffer eviction failed kernel: qxl 0000:00:02.0: object_init failed for (4026540032, 0x00000001) kernel: [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate VRAM BO on QXL when switching and accessing on VT. The culprit was the generic deferred_io code (qxl driver switched to it since 4.7). There is a race between the dirty clip update and the call of callback. In drm_fb_helper_dirty(), the dirty clip is updated in the spinlock, while it kicks off the update worker outside the spinlock. Meanwhile the update worker clears the dirty clip in the spinlock, too. Thus, when drm_fb_helper_dirty() is called concurrently, schedule_work() is called after the clip is cleared in the first worker call. This patch addresses it by validating the clip before calling the dirty fb callback. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98322 Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1003298 Fixes: eaa434defaca ('drm/fb-helper: Add fb_deferred_io support') Cc: Signed-off-by: Takashi Iwai Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161020150530.5787-1-tiwai@suse.de --- drivers/gpu/drm/drm_fb_helper.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 03414bde1f15..aae7df01864d 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -644,7 +644,9 @@ static void drm_fb_helper_dirty_work(struct work_struct *work) clip->x2 = clip->y2 = 0; spin_unlock_irqrestore(&helper->dirty_lock, flags); - helper->fb->funcs->dirty(helper->fb, NULL, 0, 0, &clip_copy, 1); + /* call dirty callback only when it has been really touched */ + if (clip_copy.x1 < clip_copy.x2 && clip_copy.y1 < clip_copy.y2) + helper->fb->funcs->dirty(helper->fb, NULL, 0, 0, &clip_copy, 1); } /** -- cgit From 5c0ba57744b1422d528f19430dd66d6803cea86f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 25 Oct 2016 22:57:10 +0200 Subject: spi: fsl-espi: avoid processing uninitalized data on error When we get a spurious interrupt in fsl_espi_irq, we end up processing four uninitalized bytes of data, as shown in this warning message: drivers/spi/spi-fsl-espi.c: In function 'fsl_espi_irq': drivers/spi/spi-fsl-espi.c:462:4: warning: 'rx_data' may be used uninitialized in this function [-Wmaybe-uninitialized] This adds another check so we skip the data in this case. Fixes: 6319a68011b8 ("spi/fsl-espi: avoid infinite loops on fsl_espi_cpu_irq()") Signed-off-by: Arnd Bergmann Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-fsl-espi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c index 7451585a080e..2c175b9495f7 100644 --- a/drivers/spi/spi-fsl-espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -458,7 +458,7 @@ static void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) mspi->len -= rx_nr_bytes; - if (mspi->rx) + if (rx_nr_bytes && mspi->rx) mspi->get_rx(rx_data, mspi); } -- cgit From 1e6d304431958929b601b013687b73293ba27b88 Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen Date: Mon, 24 Oct 2016 16:42:52 +0200 Subject: ASoC: sti: fix channel status update after playback start If 'IEC958 Playback Default' control is updated during playback, Channel status needs to be set according to the runtime structure. Signed-off-by: Arnaud Pouliquen Signed-off-by: Mark Brown --- sound/soc/sti/uniperif_player.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/soc/sti/uniperif_player.c b/sound/soc/sti/uniperif_player.c index 1bc8ebc2528e..ad54d4cf58ad 100644 --- a/sound/soc/sti/uniperif_player.c +++ b/sound/soc/sti/uniperif_player.c @@ -614,7 +614,11 @@ static int uni_player_ctl_iec958_put(struct snd_kcontrol *kcontrol, iec958->status[3] = ucontrol->value.iec958.status[3]; mutex_unlock(&player->ctrl_lock); - uni_player_set_channel_status(player, NULL); + if (player->substream && player->substream->runtime) + uni_player_set_channel_status(player, + player->substream->runtime); + else + uni_player_set_channel_status(player, NULL); return 0; } -- cgit From 7e235deb69dc7b1c4b5e1ac63a3157ef98ceeff3 Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen Date: Mon, 24 Oct 2016 16:42:57 +0200 Subject: ASoC: sti-sas: enable fast io for regmap Some registers accesses are done in atomic context. Enable fast io to use spinlock instead of mutex to protect access. Signed-off-by: Arnaud Pouliquen Signed-off-by: Mark Brown --- sound/soc/codecs/sti-sas.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/sti-sas.c b/sound/soc/codecs/sti-sas.c index 7b31ee9b82bc..d6e00c77edcd 100644 --- a/sound/soc/codecs/sti-sas.c +++ b/sound/soc/codecs/sti-sas.c @@ -424,7 +424,7 @@ static const struct snd_soc_dai_ops stih407_dac_ops = { static const struct regmap_config stih407_sas_regmap = { .reg_bits = 32, .val_bits = 32, - + .fast_io = true, .max_register = STIH407_AUDIO_DAC_CTRL, .reg_defaults = stih407_sas_reg_defaults, .num_reg_defaults = ARRAY_SIZE(stih407_sas_reg_defaults), -- cgit From 9078210ef4016539c909fb67164d3f1c27323d8b Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 25 Oct 2016 16:08:19 +0100 Subject: KVM: MIPS: Fix lazy user ASID regenerate for SMP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit kvm_mips_check_asids() runs before entering the guest and performs lazy regeneration of host ASID for guest usermode, using last_user_gasid to track the last guest ASID in the VCPU that was used by guest usermode on any host CPU. last_user_gasid is reset after performing the lazy ASID regeneration on the current CPU, and by kvm_arch_vcpu_load() if the host ASID for guest usermode is regenerated due to staleness (to cancel outstanding lazy ASID regenerations). Unfortunately neither case handles SMP hosts correctly: - When the lazy ASID regeneration is performed it should apply to all CPUs (as last_user_gasid does), so reset the ASID on other CPUs to zero to trigger regeneration when the VCPU is next loaded on those CPUs. - When the ASID is found to be stale on the current CPU, we should not cancel lazy ASID regenerations globally, so drop the reset of last_user_gasid altogether here. Both cases would require a guest ASID change and two host CPU migrations (and in the latter case one of the CPUs to start a new ASID cycle) before guest usermode could potentially access stale user pages from a previously running ASID in the same VCPU. Fixes: 25b08c7fb0e4 ("KVM: MIPS: Invalidate TLB by regenerating ASIDs") Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: "Radim Krčmář Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/mips/kvm/mips.c | 5 ++++- arch/mips/kvm/mmu.c | 4 ---- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c index 622037d851a3..06a60b19acfb 100644 --- a/arch/mips/kvm/mips.c +++ b/arch/mips/kvm/mips.c @@ -426,7 +426,7 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu, static void kvm_mips_check_asids(struct kvm_vcpu *vcpu) { struct mips_coproc *cop0 = vcpu->arch.cop0; - int cpu = smp_processor_id(); + int i, cpu = smp_processor_id(); unsigned int gasid; /* @@ -442,6 +442,9 @@ static void kvm_mips_check_asids(struct kvm_vcpu *vcpu) vcpu); vcpu->arch.guest_user_asid[cpu] = vcpu->arch.guest_user_mm.context.asid[cpu]; + for_each_possible_cpu(i) + if (i != cpu) + vcpu->arch.guest_user_asid[cpu] = 0; vcpu->arch.last_user_gasid = gasid; } } diff --git a/arch/mips/kvm/mmu.c b/arch/mips/kvm/mmu.c index 03883ba806e2..3b677c851be0 100644 --- a/arch/mips/kvm/mmu.c +++ b/arch/mips/kvm/mmu.c @@ -260,13 +260,9 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) if ((vcpu->arch.guest_user_asid[cpu] ^ asid_cache(cpu)) & asid_version_mask(cpu)) { - u32 gasid = kvm_read_c0_guest_entryhi(vcpu->arch.cop0) & - KVM_ENTRYHI_ASID; - kvm_get_new_mmu_context(&vcpu->arch.guest_user_mm, cpu, vcpu); vcpu->arch.guest_user_asid[cpu] = vcpu->arch.guest_user_mm.context.asid[cpu]; - vcpu->arch.last_user_gasid = gasid; newasid++; kvm_debug("[%d]: cpu_context: %#lx\n", cpu, -- cgit From ede5f3e7b54a4347be4d8525269eae50902bd7cd Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 25 Oct 2016 16:11:11 +0100 Subject: KVM: MIPS: Make ERET handle ERL before EXL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ERET instruction to return from exception is used for returning from exception level (Status.EXL) and error level (Status.ERL). If both bits are set however we should be returning from ERL first, as ERL can interrupt EXL, for example when an NMI is taken. KVM however checks EXL first. Fix the order of the checks to match the pseudocode in the instruction set manual. Fixes: e685c689f3a8 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: "Radim Krčmář Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: # 3.10.x- Signed-off-by: Paolo Bonzini --- arch/mips/kvm/emulate.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c index 8770f32c9e0b..c45ef0f13dfa 100644 --- a/arch/mips/kvm/emulate.c +++ b/arch/mips/kvm/emulate.c @@ -790,15 +790,15 @@ enum emulation_result kvm_mips_emul_eret(struct kvm_vcpu *vcpu) struct mips_coproc *cop0 = vcpu->arch.cop0; enum emulation_result er = EMULATE_DONE; - if (kvm_read_c0_guest_status(cop0) & ST0_EXL) { + if (kvm_read_c0_guest_status(cop0) & ST0_ERL) { + kvm_clear_c0_guest_status(cop0, ST0_ERL); + vcpu->arch.pc = kvm_read_c0_guest_errorepc(cop0); + } else if (kvm_read_c0_guest_status(cop0) & ST0_EXL) { kvm_debug("[%#lx] ERET to %#lx\n", vcpu->arch.pc, kvm_read_c0_guest_epc(cop0)); kvm_clear_c0_guest_status(cop0, ST0_EXL); vcpu->arch.pc = kvm_read_c0_guest_epc(cop0); - } else if (kvm_read_c0_guest_status(cop0) & ST0_ERL) { - kvm_clear_c0_guest_status(cop0, ST0_ERL); - vcpu->arch.pc = kvm_read_c0_guest_errorepc(cop0); } else { kvm_err("[%#lx] ERET when MIPS_SR_EXL|MIPS_SR_ERL == 0\n", vcpu->arch.pc); -- cgit From e1e575f6b026734be3b1f075e780e91ab08ca541 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 25 Oct 2016 16:11:12 +0100 Subject: KVM: MIPS: Precalculate MMIO load resume PC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The advancing of the PC when completing an MMIO load is done before re-entering the guest, i.e. before restoring the guest ASID. However if the load is in a branch delay slot it may need to access guest code to read the prior branch instruction. This isn't safe in TLB mapped code at the moment, nor in the future when we'll access unmapped guest segments using direct user accessors too, as it could read the branch from host user memory instead. Therefore calculate the resume PC in advance while we're still in the right context and save it in the new vcpu->arch.io_pc (replacing the no longer needed vcpu->arch.pending_load_cause), and restore it on MMIO completion. Fixes: e685c689f3a8 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: "Radim Krčmář Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: # 3.10.x- Signed-off-by: Paolo Bonzini --- arch/mips/include/asm/kvm_host.h | 7 ++++--- arch/mips/kvm/emulate.c | 24 +++++++++++++++--------- 2 files changed, 19 insertions(+), 12 deletions(-) diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h index 07f58cfc1ab9..bebec370324f 100644 --- a/arch/mips/include/asm/kvm_host.h +++ b/arch/mips/include/asm/kvm_host.h @@ -293,7 +293,10 @@ struct kvm_vcpu_arch { /* Host KSEG0 address of the EI/DI offset */ void *kseg0_commpage; - u32 io_gpr; /* GPR used as IO source/target */ + /* Resume PC after MMIO completion */ + unsigned long io_pc; + /* GPR used as IO source/target */ + u32 io_gpr; struct hrtimer comparecount_timer; /* Count timer control KVM register */ @@ -315,8 +318,6 @@ struct kvm_vcpu_arch { /* Bitmask of pending exceptions to be cleared */ unsigned long pending_exceptions_clr; - u32 pending_load_cause; - /* Save/Restore the entryhi register when are are preempted/scheduled back in */ unsigned long preempt_entryhi; diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c index c45ef0f13dfa..aa0937423e28 100644 --- a/arch/mips/kvm/emulate.c +++ b/arch/mips/kvm/emulate.c @@ -1528,13 +1528,25 @@ enum emulation_result kvm_mips_emulate_load(union mips_instruction inst, struct kvm_vcpu *vcpu) { enum emulation_result er = EMULATE_DO_MMIO; + unsigned long curr_pc; u32 op, rt; u32 bytes; rt = inst.i_format.rt; op = inst.i_format.opcode; - vcpu->arch.pending_load_cause = cause; + /* + * Find the resume PC now while we have safe and easy access to the + * prior branch instruction, and save it for + * kvm_mips_complete_mmio_load() to restore later. + */ + curr_pc = vcpu->arch.pc; + er = update_pc(vcpu, cause); + if (er == EMULATE_FAIL) + return er; + vcpu->arch.io_pc = vcpu->arch.pc; + vcpu->arch.pc = curr_pc; + vcpu->arch.io_gpr = rt; switch (op) { @@ -2494,9 +2506,8 @@ enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu, goto done; } - er = update_pc(vcpu, vcpu->arch.pending_load_cause); - if (er == EMULATE_FAIL) - return er; + /* Restore saved resume PC */ + vcpu->arch.pc = vcpu->arch.io_pc; switch (run->mmio.len) { case 4: @@ -2518,11 +2529,6 @@ enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu, break; } - if (vcpu->arch.pending_load_cause & CAUSEF_BD) - kvm_debug("[%#lx] Completing %d byte BD Load to gpr %d (0x%08lx) type %d\n", - vcpu->arch.pc, run->mmio.len, vcpu->arch.io_gpr, *gpr, - vcpu->mmio_needed); - done: return er; } -- cgit From 45c7ee43a5184ddbff652ee0d2e826f86f1b616b Mon Sep 17 00:00:00 2001 From: Janosch Frank Date: Wed, 26 Oct 2016 08:48:11 +0200 Subject: KVM: s390: Fix STHYI buffer alignment for diag224 Diag224 requires a page-aligned 4k buffer to store the name table into. kmalloc does not guarantee page alignment, hence we replace it with __get_free_page for the buffer allocation. Cc: stable@vger.kernel.org # v4.8+ Reported-by: Michael Holzheu Signed-off-by: Janosch Frank Reviewed-by: Cornelia Huck Signed-off-by: Christian Borntraeger --- arch/s390/kvm/sthyi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/kvm/sthyi.c b/arch/s390/kvm/sthyi.c index bd98b7d25200..05c98bb853cf 100644 --- a/arch/s390/kvm/sthyi.c +++ b/arch/s390/kvm/sthyi.c @@ -315,7 +315,7 @@ static void fill_diag(struct sthyi_sctns *sctns) if (r < 0) goto out; - diag224_buf = kmalloc(PAGE_SIZE, GFP_KERNEL | GFP_DMA); + diag224_buf = (void *)__get_free_page(GFP_KERNEL | GFP_DMA); if (!diag224_buf || diag224(diag224_buf)) goto out; @@ -378,7 +378,7 @@ static void fill_diag(struct sthyi_sctns *sctns) sctns->par.infpval1 |= PAR_WGHT_VLD; out: - kfree(diag224_buf); + free_page((unsigned long)diag224_buf); vfree(diag204_buf); } -- cgit From 36343f6ea721e003ed11b48a6a05d77a255b3a62 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 26 Oct 2016 13:35:56 +0200 Subject: KVM: fix OOPS on flush_work The conversion done by commit 3706feacd007 ("KVM: Remove deprecated create_singlethread_workqueue") is broken. It flushes a single work item &irqfd->shutdown instead of all of them, and even worse if there is no irqfd on the list then you get a NULL pointer dereference. Revert the virt/kvm/eventfd.c part of that patch; to avoid the deprecated function, just allocate our own workqueue---it does not even have to be unbound---with alloc_workqueue. Fixes: 3706feacd007 Reviewed-by: Cornelia Huck Signed-off-by: Paolo Bonzini --- virt/kvm/eventfd.c | 22 +++++++++++++++++++--- virt/kvm/kvm_main.c | 6 ++++++ 2 files changed, 25 insertions(+), 3 deletions(-) diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c index f397e9b20370..a29786dd9522 100644 --- a/virt/kvm/eventfd.c +++ b/virt/kvm/eventfd.c @@ -42,6 +42,7 @@ #ifdef CONFIG_HAVE_KVM_IRQFD +static struct workqueue_struct *irqfd_cleanup_wq; static void irqfd_inject(struct work_struct *work) @@ -167,7 +168,7 @@ irqfd_deactivate(struct kvm_kernel_irqfd *irqfd) list_del_init(&irqfd->list); - schedule_work(&irqfd->shutdown); + queue_work(irqfd_cleanup_wq, &irqfd->shutdown); } int __attribute__((weak)) kvm_arch_set_irq_inatomic( @@ -554,7 +555,7 @@ kvm_irqfd_deassign(struct kvm *kvm, struct kvm_irqfd *args) * so that we guarantee there will not be any more interrupts on this * gsi once this deassign function returns. */ - flush_work(&irqfd->shutdown); + flush_workqueue(irqfd_cleanup_wq); return 0; } @@ -591,7 +592,7 @@ kvm_irqfd_release(struct kvm *kvm) * Block until we know all outstanding shutdown jobs have completed * since we do not take a kvm* reference. */ - flush_work(&irqfd->shutdown); + flush_workqueue(irqfd_cleanup_wq); } @@ -621,8 +622,23 @@ void kvm_irq_routing_update(struct kvm *kvm) spin_unlock_irq(&kvm->irqfds.lock); } +/* + * create a host-wide workqueue for issuing deferred shutdown requests + * aggregated from all vm* instances. We need our own isolated + * queue to ease flushing work items when a VM exits. + */ +int kvm_irqfd_init(void) +{ + irqfd_cleanup_wq = alloc_workqueue("kvm-irqfd-cleanup", 0, 0); + if (!irqfd_cleanup_wq) + return -ENOMEM; + + return 0; +} + void kvm_irqfd_exit(void) { + destroy_workqueue(irqfd_cleanup_wq); } #endif diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 28510e72618a..d92c3d5b0fbe 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -3846,7 +3846,12 @@ int kvm_init(void *opaque, unsigned vcpu_size, unsigned vcpu_align, * kvm_arch_init makes sure there's at most one caller * for architectures that support multiple implementations, * like intel and amd on x86. + * kvm_arch_init must be called before kvm_irqfd_init to avoid creating + * conflicts in case kvm is already setup for another implementation. */ + r = kvm_irqfd_init(); + if (r) + goto out_irqfd; if (!zalloc_cpumask_var(&cpus_hardware_enabled, GFP_KERNEL)) { r = -ENOMEM; @@ -3928,6 +3933,7 @@ out_free_0a: free_cpumask_var(cpus_hardware_enabled); out_free_0: kvm_irqfd_exit(); +out_irqfd: kvm_arch_exit(); out_fail: return r; -- cgit From 7dfcb36a1f17e4c7c7c12b9d8a6902037c7d98dc Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 26 Oct 2016 12:05:52 +0300 Subject: drm/fb-helper: Fix connector ref leak on error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We need to drop the connector references already taken when we abort in the middle of drm_fb_helper_single_add_all_connectors() Cc: stable@vger.kernel.org Cc: Carlos Santa Cc: Kirill A. Shutemov Tested-by: Carlos Santa Tested-by: Kirill A. Shutemov Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-2-git-send-email-ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_fb_helper.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index aae7df01864d..efaccc2e1b4c 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -131,7 +131,12 @@ int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper) return 0; fail: for (i = 0; i < fb_helper->connector_count; i++) { - kfree(fb_helper->connector_info[i]); + struct drm_fb_helper_connector *fb_helper_connector = + fb_helper->connector_info[i]; + + drm_connector_unreference(fb_helper_connector->connector); + + kfree(fb_helper_connector); fb_helper->connector_info[i] = NULL; } fb_helper->connector_count = 0; -- cgit From 38d868e41c4b9250d5a115c049dc2d48f4909581 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Mon, 10 Oct 2016 17:50:56 +0300 Subject: drm: Don't force all planes to be added to the state due to zpos MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We don't want all planes to be added to the state whenever a plane with fixed zpos gets enabled/disabled. This is true especially for eg. cursor planes on i915, as we want cursor updates to go through w/o throttling. Same holds for drivers that don't support zpos at all (i915 actually falls into this category right now since we've not yet added zpos support). Allow drivers more freedom by letting them deal with zpos themselves instead of doing it in drm_atomic_helper_check_planes() unconditionally. Let's just inline the required calls into all the driver that currently depend on this. v2: Inline the stuff into the drivers instead of adding another helper, document things better (Daniel) Cc: Daniel Vetter Cc: Marek Szyprowski Cc: Benjamin Gaignard Cc: Vincent Abriou Cc: Laurent Pinchart Cc: Inki Dae Cc: Joonyoung Shim Cc: Seung-Woo Kim Cc: Kyungmin Park Cc: Lyude Cc: Maarten Lankhorst Cc: stable@vger.kernel.org Fixes: 44d1240d006c ("drm: add generic zpos property") Signed-off-by: Ville Syrjälä Reviewed-by: Sean Paul Acked-by: Benjamin Gaignard Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1476111056-12734-1-git-send-email-ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_atomic_helper.c | 4 ---- drivers/gpu/drm/exynos/exynos_drm_drv.c | 20 ++++++++++++++++++++ drivers/gpu/drm/exynos/exynos_drm_drv.h | 1 + drivers/gpu/drm/exynos/exynos_drm_fb.c | 2 +- drivers/gpu/drm/rcar-du/rcar_du_kms.c | 12 ++++++++++-- drivers/gpu/drm/sti/sti_drv.c | 22 +++++++++++++++++++++- include/drm/drm_plane.h | 8 +++++++- 7 files changed, 60 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index c3f83476f996..21f992605541 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -594,10 +594,6 @@ drm_atomic_helper_check_planes(struct drm_device *dev, struct drm_plane_state *plane_state; int i, ret = 0; - ret = drm_atomic_normalize_zpos(dev, state); - if (ret) - return ret; - for_each_plane_in_state(state, plane, plane_state, i) { const struct drm_plane_helper_funcs *funcs; diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index def78c8c1780..f86e7c846678 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -262,6 +262,26 @@ int exynos_atomic_commit(struct drm_device *dev, struct drm_atomic_state *state, return 0; } +int exynos_atomic_check(struct drm_device *dev, + struct drm_atomic_state *state) +{ + int ret; + + ret = drm_atomic_helper_check_modeset(dev, state); + if (ret) + return ret; + + ret = drm_atomic_normalize_zpos(dev, state); + if (ret) + return ret; + + ret = drm_atomic_helper_check_planes(dev, state); + if (ret) + return ret; + + return ret; +} + static int exynos_drm_open(struct drm_device *dev, struct drm_file *file) { struct drm_exynos_file_private *file_priv; diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index d215149e737b..80c4d5b81689 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -301,6 +301,7 @@ static inline int exynos_dpi_bind(struct drm_device *dev, int exynos_atomic_commit(struct drm_device *dev, struct drm_atomic_state *state, bool nonblock); +int exynos_atomic_check(struct drm_device *dev, struct drm_atomic_state *state); extern struct platform_driver fimd_driver; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.c b/drivers/gpu/drm/exynos/exynos_drm_fb.c index 40ce841eb952..23cce0a3f5fc 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fb.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fb.c @@ -190,7 +190,7 @@ dma_addr_t exynos_drm_fb_dma_addr(struct drm_framebuffer *fb, int index) static const struct drm_mode_config_funcs exynos_drm_mode_config_funcs = { .fb_create = exynos_user_fb_create, .output_poll_changed = exynos_drm_output_poll_changed, - .atomic_check = drm_atomic_helper_check, + .atomic_check = exynos_atomic_check, .atomic_commit = exynos_atomic_commit, }; diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c index bd9c3bb9252c..392c7e6de042 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c @@ -231,8 +231,16 @@ static int rcar_du_atomic_check(struct drm_device *dev, struct rcar_du_device *rcdu = dev->dev_private; int ret; - ret = drm_atomic_helper_check(dev, state); - if (ret < 0) + ret = drm_atomic_helper_check_modeset(dev, state); + if (ret) + return ret; + + ret = drm_atomic_normalize_zpos(dev, state); + if (ret) + return ret; + + ret = drm_atomic_helper_check_planes(dev, state); + if (ret) return ret; if (rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE)) diff --git a/drivers/gpu/drm/sti/sti_drv.c b/drivers/gpu/drm/sti/sti_drv.c index 2784919a7366..9df308565f6c 100644 --- a/drivers/gpu/drm/sti/sti_drv.c +++ b/drivers/gpu/drm/sti/sti_drv.c @@ -195,6 +195,26 @@ static void sti_atomic_work(struct work_struct *work) sti_atomic_complete(private, private->commit.state); } +static int sti_atomic_check(struct drm_device *dev, + struct drm_atomic_state *state) +{ + int ret; + + ret = drm_atomic_helper_check_modeset(dev, state); + if (ret) + return ret; + + ret = drm_atomic_normalize_zpos(dev, state); + if (ret) + return ret; + + ret = drm_atomic_helper_check_planes(dev, state); + if (ret) + return ret; + + return ret; +} + static int sti_atomic_commit(struct drm_device *drm, struct drm_atomic_state *state, bool nonblock) { @@ -248,7 +268,7 @@ static void sti_output_poll_changed(struct drm_device *ddev) static const struct drm_mode_config_funcs sti_mode_config_funcs = { .fb_create = drm_fb_cma_create, .output_poll_changed = sti_output_poll_changed, - .atomic_check = drm_atomic_helper_check, + .atomic_check = sti_atomic_check, .atomic_commit = sti_atomic_commit, }; diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h index 43cf193e54d6..8b4dc62470ff 100644 --- a/include/drm/drm_plane.h +++ b/include/drm/drm_plane.h @@ -47,8 +47,14 @@ struct drm_crtc; * @src_h: height of visible portion of plane (in 16.16) * @rotation: rotation of the plane * @zpos: priority of the given plane on crtc (optional) + * Note that multiple active planes on the same crtc can have an identical + * zpos value. The rule to solving the conflict is to compare the plane + * object IDs; the plane with a higher ID must be stacked on top of a + * plane with a lower ID. * @normalized_zpos: normalized value of zpos: unique, range from 0 to N-1 - * where N is the number of active planes for given crtc + * where N is the number of active planes for given crtc. Note that + * the driver must call drm_atomic_normalize_zpos() to update this before + * it can be trusted. * @src: clipped source coordinates of the plane (in 16.16) * @dst: clipped destination coordinates of the plane * @visible: visibility of the plane -- cgit From a2889606636d135148de101fe3311dfea67baf1c Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 26 Oct 2016 17:41:18 +0300 Subject: drm/fb-helper: Keep references for the current set of used connectors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The fbdev helper code keeps around two lists of connectors. One is the list of all connectors it could use, and that list already holds references for all the connectors. However the other list, or rather lists, is the one actively being used. That list is tracked per-crtc and currently doesn't hold any extra references. Let's grab those extra references to avoid oopsing when the connector vanishes. The list of all possible connectors should get updated when the hpd happens, but the list of actively used connectors would not get updated until the next time the fb-helper picks through the set of possible connectors. And so we need to hang on to the connectors until that time. Since we need to clean up in drm_fb_helper_crtc_free() as well, let's pull the code to a common place. And while at it let's pull in up the modeset->mode cleanup in there as well. The case of modeset->fb is a bit less clear. I'm thinking we should probably hold a reference to it, but for now I just slapped on a FIXME. v2: Cleanup things drm_fb_helper_crtc_free() too (Chris) v3: Don't leak modeset->connectors (Chris) Cc: Chris Wilson Cc: stable@vger.kernel.org Cc: Carlos Santa Cc: Kirill A. Shutemov Tested-by: Carlos Santa (v1) Tested-by: Kirill A. Shutemov (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1477492878-4990-1-git-send-email-ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_fb_helper.c | 57 ++++++++++++++++++++++++----------------- 1 file changed, 33 insertions(+), 24 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index efaccc2e1b4c..6c75e62c0b22 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -608,6 +608,24 @@ int drm_fb_helper_blank(int blank, struct fb_info *info) } EXPORT_SYMBOL(drm_fb_helper_blank); +static void drm_fb_helper_modeset_release(struct drm_fb_helper *helper, + struct drm_mode_set *modeset) +{ + int i; + + for (i = 0; i < modeset->num_connectors; i++) { + drm_connector_unreference(modeset->connectors[i]); + modeset->connectors[i] = NULL; + } + modeset->num_connectors = 0; + + drm_mode_destroy(helper->dev, modeset->mode); + modeset->mode = NULL; + + /* FIXME should hold a ref? */ + modeset->fb = NULL; +} + static void drm_fb_helper_crtc_free(struct drm_fb_helper *helper) { int i; @@ -617,10 +635,12 @@ static void drm_fb_helper_crtc_free(struct drm_fb_helper *helper) kfree(helper->connector_info[i]); } kfree(helper->connector_info); + for (i = 0; i < helper->crtc_count; i++) { - kfree(helper->crtc_info[i].mode_set.connectors); - if (helper->crtc_info[i].mode_set.mode) - drm_mode_destroy(helper->dev, helper->crtc_info[i].mode_set.mode); + struct drm_mode_set *modeset = &helper->crtc_info[i].mode_set; + + drm_fb_helper_modeset_release(helper, modeset); + kfree(modeset->connectors); } kfree(helper->crtc_info); } @@ -2095,7 +2115,6 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper) struct drm_fb_helper_crtc **crtcs; struct drm_display_mode **modes; struct drm_fb_offset *offsets; - struct drm_mode_set *modeset; bool *enabled; int width, height; int i; @@ -2143,45 +2162,35 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper) /* need to set the modesets up here for use later */ /* fill out the connector<->crtc mappings into the modesets */ - for (i = 0; i < fb_helper->crtc_count; i++) { - modeset = &fb_helper->crtc_info[i].mode_set; - modeset->num_connectors = 0; - modeset->fb = NULL; - } + for (i = 0; i < fb_helper->crtc_count; i++) + drm_fb_helper_modeset_release(fb_helper, + &fb_helper->crtc_info[i].mode_set); for (i = 0; i < fb_helper->connector_count; i++) { struct drm_display_mode *mode = modes[i]; struct drm_fb_helper_crtc *fb_crtc = crtcs[i]; struct drm_fb_offset *offset = &offsets[i]; - modeset = &fb_crtc->mode_set; + struct drm_mode_set *modeset = &fb_crtc->mode_set; if (mode && fb_crtc) { + struct drm_connector *connector = + fb_helper->connector_info[i]->connector; + DRM_DEBUG_KMS("desired mode %s set on crtc %d (%d,%d)\n", mode->name, fb_crtc->mode_set.crtc->base.id, offset->x, offset->y); + fb_crtc->desired_mode = mode; fb_crtc->x = offset->x; fb_crtc->y = offset->y; - if (modeset->mode) - drm_mode_destroy(dev, modeset->mode); modeset->mode = drm_mode_duplicate(dev, fb_crtc->desired_mode); - modeset->connectors[modeset->num_connectors++] = fb_helper->connector_info[i]->connector; + drm_connector_reference(connector); + modeset->connectors[modeset->num_connectors++] = connector; modeset->fb = fb_helper->fb; modeset->x = offset->x; modeset->y = offset->y; } } - - /* Clear out any old modes if there are no more connected outputs. */ - for (i = 0; i < fb_helper->crtc_count; i++) { - modeset = &fb_helper->crtc_info[i].mode_set; - if (modeset->num_connectors == 0) { - BUG_ON(modeset->fb); - if (modeset->mode) - drm_mode_destroy(dev, modeset->mode); - modeset->mode = NULL; - } - } out: kfree(crtcs); kfree(modes); -- cgit From 36e3fa6a38e135e9478a2f75dec9bf6ff1e6480e Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 26 Oct 2016 16:30:33 +0300 Subject: drm/dp/mst: Clear port->pdt when tearing down the i2c adapter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The i2c adapter is only relevant for some peer device types, so let's clear the pdt if it's still the same as the old_pdt when we tear down the i2c adapter. I don't really like this design pattern of updating port->whatever before doing the accompanying changes and passing around old_whatever to figure stuff out. Would make much more sense to me to the pass the new value around and only update the port->whatever when things are consistent. But let's try to work with what we have right now. Quoting a follow-up from Ville: "And naturally I forgot to amend the commit message w.r.t. this guy [the change in drm_dp_destroy_port]. We don't really need to do this here, but I figured I'd try to be a bit more consistent by having it, just to avoid accidental mistakes if/when someone changes this stuff again later." v2: Clear port->pdt in the caller, if needed (Daniel) Cc: Daniel Vetter Cc: stable@vger.kernel.org Cc: Carlos Santa Cc: Kirill A. Shutemov Tested-by: Carlos Santa (v1) Tested-by: Kirill A. Shutemov (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1477488633-16544-1-git-send-email-ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_dp_mst_topology.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index 04e457117980..ba13f9d8720b 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -914,6 +914,7 @@ static void drm_dp_destroy_port(struct kref *kref) /* no need to clean up vcpi * as if we have no connector we never setup a vcpi */ drm_dp_port_teardown_pdt(port, port->pdt); + port->pdt = DP_PEER_DEVICE_NONE; } kfree(port); } @@ -2919,6 +2920,7 @@ static void drm_dp_destroy_connector_work(struct work_struct *work) mgr->cbs->destroy_connector(mgr, port->connector); drm_dp_port_teardown_pdt(port, port->pdt); + port->pdt = DP_PEER_DEVICE_NONE; if (!port->input && port->vcpi.vcpi > 0) { drm_dp_mst_reset_vcpi_slots(mgr, port); -- cgit From 4da5caa6a6f82cda3193bca855235b87debf78bd Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Wed, 26 Oct 2016 12:05:55 +0300 Subject: drm/dp/mst: Check peer device type before attempting EDID read MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Only certain types of pdts have the DDC bus registered, so check for that before we attempt the EDID read. Othwewise we risk playing around with an i2c adapter that doesn't actually exist. Cc: stable@vger.kernel.org Cc: Carlos Santa Cc: Kirill A. Shutemov Tested-by: Carlos Santa Tested-by: Kirill A. Shutemov Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-5-git-send-email-ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_dp_mst_topology.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index ba13f9d8720b..aa644487749c 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -1160,7 +1160,9 @@ static void drm_dp_add_port(struct drm_dp_mst_branch *mstb, drm_dp_put_port(port); goto out; } - if (port->port_num >= DP_MST_LOGICAL_PORT_0) { + if ((port->pdt == DP_PEER_DEVICE_DP_LEGACY_CONV || + port->pdt == DP_PEER_DEVICE_SST_SINK) && + port->port_num >= DP_MST_LOGICAL_PORT_0) { port->cached_edid = drm_get_edid(port->connector, &port->aux.ddc); drm_mode_connector_set_tile_property(port->connector); } -- cgit From 830cda3f9855ff092b0e9610346d110846fc497c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 26 Oct 2016 10:08:22 -0700 Subject: sparc64: Fix instruction count in comment for __hypervisor_flush_tlb_pending. Noticed by James Clarke. Signed-off-by: David S. Miller --- arch/sparc/mm/ultra.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc/mm/ultra.S b/arch/sparc/mm/ultra.S index 85de139bfad6..5128d38b1d1a 100644 --- a/arch/sparc/mm/ultra.S +++ b/arch/sparc/mm/ultra.S @@ -358,7 +358,7 @@ __hypervisor_flush_tlb_page: /* 22 insns */ nop nop -__hypervisor_flush_tlb_pending: /* 16 insns */ +__hypervisor_flush_tlb_pending: /* 27 insns */ /* %o0 = context, %o1 = nr, %o2 = vaddrs[] */ sllx %o1, 3, %g1 mov %o2, %g2 -- cgit From a236441bb69723032db94128761a469030c3fe6d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 26 Oct 2016 10:20:14 -0700 Subject: sparc64: Fix illegal relative branches in hypervisor patched TLB cross-call code. Just like the non-cross-call TLB flush handlers, the cross-call ones need to avoid doing PC-relative branches outside of their code blocks. Signed-off-by: David S. Miller --- arch/sparc/mm/ultra.S | 42 ++++++++++++++++++++++++++++++------------ 1 file changed, 30 insertions(+), 12 deletions(-) diff --git a/arch/sparc/mm/ultra.S b/arch/sparc/mm/ultra.S index 5128d38b1d1a..0fa2e6202c1f 100644 --- a/arch/sparc/mm/ultra.S +++ b/arch/sparc/mm/ultra.S @@ -484,7 +484,7 @@ cheetah_patch_cachetlbops: */ .align 32 .globl xcall_flush_tlb_mm -xcall_flush_tlb_mm: /* 21 insns */ +xcall_flush_tlb_mm: /* 24 insns */ mov PRIMARY_CONTEXT, %g2 ldxa [%g2] ASI_DMMU, %g3 srlx %g3, CTX_PGSZ1_NUC_SHIFT, %g4 @@ -506,9 +506,12 @@ xcall_flush_tlb_mm: /* 21 insns */ nop nop nop + nop + nop + nop .globl xcall_flush_tlb_page -xcall_flush_tlb_page: /* 17 insns */ +xcall_flush_tlb_page: /* 20 insns */ /* %g5=context, %g1=vaddr */ mov PRIMARY_CONTEXT, %g4 ldxa [%g4] ASI_DMMU, %g2 @@ -527,9 +530,12 @@ xcall_flush_tlb_page: /* 17 insns */ retry nop nop + nop + nop + nop .globl xcall_flush_tlb_kernel_range -xcall_flush_tlb_kernel_range: /* 25 insns */ +xcall_flush_tlb_kernel_range: /* 28 insns */ sethi %hi(PAGE_SIZE - 1), %g2 or %g2, %lo(PAGE_SIZE - 1), %g2 andn %g1, %g2, %g1 @@ -555,6 +561,9 @@ xcall_flush_tlb_kernel_range: /* 25 insns */ nop nop nop + nop + nop + nop /* This runs in a very controlled environment, so we do * not need to worry about BH races etc. @@ -737,7 +746,7 @@ __hypervisor_tlb_xcall_error: ba,a,pt %xcc, rtrap .globl __hypervisor_xcall_flush_tlb_mm -__hypervisor_xcall_flush_tlb_mm: /* 21 insns */ +__hypervisor_xcall_flush_tlb_mm: /* 24 insns */ /* %g5=ctx, g1,g2,g3,g4,g7=scratch, %g6=unusable */ mov %o0, %g2 mov %o1, %g3 @@ -751,7 +760,7 @@ __hypervisor_xcall_flush_tlb_mm: /* 21 insns */ mov HV_FAST_MMU_DEMAP_CTX, %o5 ta HV_FAST_TRAP mov HV_FAST_MMU_DEMAP_CTX, %g6 - brnz,pn %o0, __hypervisor_tlb_xcall_error + brnz,pn %o0, 1f mov %o0, %g5 mov %g2, %o0 mov %g3, %o1 @@ -760,9 +769,12 @@ __hypervisor_xcall_flush_tlb_mm: /* 21 insns */ mov %g7, %o5 membar #Sync retry +1: sethi %hi(__hypervisor_tlb_xcall_error), %g4 + jmpl %g4 + %lo(__hypervisor_tlb_xcall_error), %g0 + nop .globl __hypervisor_xcall_flush_tlb_page -__hypervisor_xcall_flush_tlb_page: /* 17 insns */ +__hypervisor_xcall_flush_tlb_page: /* 20 insns */ /* %g5=ctx, %g1=vaddr */ mov %o0, %g2 mov %o1, %g3 @@ -774,16 +786,19 @@ __hypervisor_xcall_flush_tlb_page: /* 17 insns */ sllx %o0, PAGE_SHIFT, %o0 ta HV_MMU_UNMAP_ADDR_TRAP mov HV_MMU_UNMAP_ADDR_TRAP, %g6 - brnz,a,pn %o0, __hypervisor_tlb_xcall_error + brnz,a,pn %o0, 1f mov %o0, %g5 mov %g2, %o0 mov %g3, %o1 mov %g4, %o2 membar #Sync retry +1: sethi %hi(__hypervisor_tlb_xcall_error), %g4 + jmpl %g4 + %lo(__hypervisor_tlb_xcall_error), %g0 + nop .globl __hypervisor_xcall_flush_tlb_kernel_range -__hypervisor_xcall_flush_tlb_kernel_range: /* 25 insns */ +__hypervisor_xcall_flush_tlb_kernel_range: /* 28 insns */ /* %g1=start, %g7=end, g2,g3,g4,g5,g6=scratch */ sethi %hi(PAGE_SIZE - 1), %g2 or %g2, %lo(PAGE_SIZE - 1), %g2 @@ -800,7 +815,7 @@ __hypervisor_xcall_flush_tlb_kernel_range: /* 25 insns */ mov HV_MMU_ALL, %o2 /* ARG2: flags */ ta HV_MMU_UNMAP_ADDR_TRAP mov HV_MMU_UNMAP_ADDR_TRAP, %g6 - brnz,pn %o0, __hypervisor_tlb_xcall_error + brnz,pn %o0, 1f mov %o0, %g5 sethi %hi(PAGE_SIZE), %o2 brnz,pt %g3, 1b @@ -810,6 +825,9 @@ __hypervisor_xcall_flush_tlb_kernel_range: /* 25 insns */ mov %g7, %o2 membar #Sync retry +1: sethi %hi(__hypervisor_tlb_xcall_error), %g4 + jmpl %g4 + %lo(__hypervisor_tlb_xcall_error), %g0 + nop /* These just get rescheduled to PIL vectors. */ .globl xcall_call_function @@ -894,21 +912,21 @@ hypervisor_patch_cachetlbops: sethi %hi(__hypervisor_xcall_flush_tlb_mm), %o1 or %o1, %lo(__hypervisor_xcall_flush_tlb_mm), %o1 call tlb_patch_one - mov 21, %o2 + mov 24, %o2 sethi %hi(xcall_flush_tlb_page), %o0 or %o0, %lo(xcall_flush_tlb_page), %o0 sethi %hi(__hypervisor_xcall_flush_tlb_page), %o1 or %o1, %lo(__hypervisor_xcall_flush_tlb_page), %o1 call tlb_patch_one - mov 17, %o2 + mov 20, %o2 sethi %hi(xcall_flush_tlb_kernel_range), %o0 or %o0, %lo(xcall_flush_tlb_kernel_range), %o0 sethi %hi(__hypervisor_xcall_flush_tlb_kernel_range), %o1 or %o1, %lo(__hypervisor_xcall_flush_tlb_kernel_range), %o1 call tlb_patch_one - mov 25, %o2 + mov 28, %o2 #endif /* CONFIG_SMP */ ret -- cgit From 49a5d73fd03528289c315d345e4917a1ba2b48e7 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Fri, 21 Oct 2016 16:55:02 +0800 Subject: drm/amdgpu: fix s3 resume back, uvd dpm randomly can't disable. the value of last_mclk_dpm_enable_mask will be changed if other clients(vce,dal) trigger set power state between enable and disable uvd dpm. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/ci_dpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c index 29e6061b9087..5be788b269e2 100644 --- a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c @@ -4075,7 +4075,7 @@ static int ci_enable_uvd_dpm(struct amdgpu_device *adev, bool enable) pi->dpm_level_enable_mask.mclk_dpm_enable_mask); } } else { - if (pi->last_mclk_dpm_enable_mask & 0x1) { + if (pi->uvd_enabled) { pi->uvd_enabled = false; pi->dpm_level_enable_mask.mclk_dpm_enable_mask |= 1; amdgpu_ci_send_msg_to_smc_with_parameter(adev, -- cgit From 7dc86ef5ac91642dfc3eb93ee0f0458e702a343e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 14 Oct 2016 16:38:02 -0400 Subject: drm/radeon/si_dpm: workaround for SI kickers Consolidate existing quirks. Fixes stability issues on some kickers. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/si_dpm.c | 59 ++++++++++++++++++++++++++++++----------- 1 file changed, 43 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index e22b11189628..c49934527a87 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -2999,6 +2999,49 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev, int i; struct si_dpm_quirk *p = si_dpm_quirk_list; + /* limit all SI kickers */ + if (rdev->family == CHIP_PITCAIRN) { + if ((rdev->pdev->revision == 0x81) || + (rdev->pdev->device == 0x6810) || + (rdev->pdev->device == 0x6811) || + (rdev->pdev->device == 0x6816) || + (rdev->pdev->device == 0x6817) || + (rdev->pdev->device == 0x6806)) + max_mclk = 120000; + } else if (rdev->family == CHIP_VERDE) { + if ((rdev->pdev->revision == 0x81) || + (rdev->pdev->revision == 0x83) || + (rdev->pdev->revision == 0x87) || + (rdev->pdev->device == 0x6820) || + (rdev->pdev->device == 0x6821) || + (rdev->pdev->device == 0x6822) || + (rdev->pdev->device == 0x6823) || + (rdev->pdev->device == 0x682A) || + (rdev->pdev->device == 0x682B)) { + max_sclk = 75000; + max_mclk = 80000; + } + } else if (rdev->family == CHIP_OLAND) { + if ((rdev->pdev->revision == 0xC7) || + (rdev->pdev->revision == 0x80) || + (rdev->pdev->revision == 0x81) || + (rdev->pdev->revision == 0x83) || + (rdev->pdev->device == 0x6604) || + (rdev->pdev->device == 0x6605)) { + max_sclk = 75000; + max_mclk = 80000; + } + } else if (rdev->family == CHIP_HAINAN) { + if ((rdev->pdev->revision == 0x81) || + (rdev->pdev->revision == 0x83) || + (rdev->pdev->revision == 0xC3) || + (rdev->pdev->device == 0x6664) || + (rdev->pdev->device == 0x6665) || + (rdev->pdev->device == 0x6667)) { + max_sclk = 75000; + max_mclk = 80000; + } + } /* Apply dpm quirks */ while (p && p->chip_device != 0) { if (rdev->pdev->vendor == p->chip_vendor && @@ -3011,22 +3054,6 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev, } ++p; } - /* limit mclk on all R7 370 parts for stability */ - if (rdev->pdev->device == 0x6811 && - rdev->pdev->revision == 0x81) - max_mclk = 120000; - /* limit sclk/mclk on Jet parts for stability */ - if (rdev->pdev->device == 0x6665 && - rdev->pdev->revision == 0xc3) { - max_sclk = 75000; - max_mclk = 80000; - } - /* limit clocks on HD8600 series */ - if (rdev->pdev->device == 0x6660 && - rdev->pdev->revision == 0x83) { - max_sclk = 75000; - max_mclk = 80000; - } if (rps->vce_active) { rps->evclk = rdev->pm.dpm.vce_states[rdev->pm.dpm.vce_level].evclk; -- cgit From ad110449e285c75eb53357e87419a73c96ccb1b9 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 25 Oct 2016 14:42:51 +0100 Subject: PCI: qcom: Fix pp->dev usage before assignment Initialize pp->dev in qcom_pcie_probe() before calling get_resources(), which uses it. [bhelgaas: changelog] Fixes: e6a087eeaf91 ("PCI: qcom: Remove redundant struct qcom_pcie.dev") Signed-off-by: Srinivas Kandagatla Signed-off-by: Bjorn Helgaas --- drivers/pci/host/pcie-qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/host/pcie-qcom.c b/drivers/pci/host/pcie-qcom.c index ef0a84c7a588..35936409b2d4 100644 --- a/drivers/pci/host/pcie-qcom.c +++ b/drivers/pci/host/pcie-qcom.c @@ -533,11 +533,11 @@ static int qcom_pcie_probe(struct platform_device *pdev) if (IS_ERR(pcie->phy)) return PTR_ERR(pcie->phy); + pp->dev = dev; ret = pcie->ops->get_resources(pcie); if (ret) return ret; - pp->dev = dev; pp->root_bus_nr = -1; pp->ops = &qcom_pcie_dw_ops; -- cgit From 05692d7005a364add85c6e25a6c4447ce08f913a Mon Sep 17 00:00:00 2001 From: Vlad Tsyrklevich Date: Wed, 12 Oct 2016 18:51:24 +0200 Subject: vfio/pci: Fix integer overflows, bitmask check The VFIO_DEVICE_SET_IRQS ioctl did not sufficiently sanitize user-supplied integers, potentially allowing memory corruption. This patch adds appropriate integer overflow checks, checks the range bounds for VFIO_IRQ_SET_DATA_NONE, and also verifies that only single element in the VFIO_IRQ_SET_DATA_TYPE_MASK bitmask is set. VFIO_IRQ_SET_ACTION_TYPE_MASK is already correctly checked later in vfio_pci_set_irqs_ioctl(). Furthermore, a kzalloc is changed to a kcalloc because the use of a kzalloc with an integer multiplication allowed an integer overflow condition to be reached without this patch. kcalloc checks for overflow and should prevent a similar occurrence. Signed-off-by: Vlad Tsyrklevich Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci.c | 33 +++++++++++++++++++++------------ drivers/vfio/pci/vfio_pci_intrs.c | 2 +- 2 files changed, 22 insertions(+), 13 deletions(-) diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index d624a527777f..031bc08d000d 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -829,8 +829,9 @@ static long vfio_pci_ioctl(void *device_data, } else if (cmd == VFIO_DEVICE_SET_IRQS) { struct vfio_irq_set hdr; + size_t size; u8 *data = NULL; - int ret = 0; + int max, ret = 0; minsz = offsetofend(struct vfio_irq_set, count); @@ -838,23 +839,31 @@ static long vfio_pci_ioctl(void *device_data, return -EFAULT; if (hdr.argsz < minsz || hdr.index >= VFIO_PCI_NUM_IRQS || + hdr.count >= (U32_MAX - hdr.start) || hdr.flags & ~(VFIO_IRQ_SET_DATA_TYPE_MASK | VFIO_IRQ_SET_ACTION_TYPE_MASK)) return -EINVAL; - if (!(hdr.flags & VFIO_IRQ_SET_DATA_NONE)) { - size_t size; - int max = vfio_pci_get_irq_count(vdev, hdr.index); + max = vfio_pci_get_irq_count(vdev, hdr.index); + if (hdr.start >= max || hdr.start + hdr.count > max) + return -EINVAL; - if (hdr.flags & VFIO_IRQ_SET_DATA_BOOL) - size = sizeof(uint8_t); - else if (hdr.flags & VFIO_IRQ_SET_DATA_EVENTFD) - size = sizeof(int32_t); - else - return -EINVAL; + switch (hdr.flags & VFIO_IRQ_SET_DATA_TYPE_MASK) { + case VFIO_IRQ_SET_DATA_NONE: + size = 0; + break; + case VFIO_IRQ_SET_DATA_BOOL: + size = sizeof(uint8_t); + break; + case VFIO_IRQ_SET_DATA_EVENTFD: + size = sizeof(int32_t); + break; + default: + return -EINVAL; + } - if (hdr.argsz - minsz < hdr.count * size || - hdr.start >= max || hdr.start + hdr.count > max) + if (size) { + if (hdr.argsz - minsz < hdr.count * size) return -EINVAL; data = memdup_user((void __user *)(arg + minsz), diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c index c2e60893cd09..1c46045b0e7f 100644 --- a/drivers/vfio/pci/vfio_pci_intrs.c +++ b/drivers/vfio/pci/vfio_pci_intrs.c @@ -256,7 +256,7 @@ static int vfio_msi_enable(struct vfio_pci_device *vdev, int nvec, bool msix) if (!is_irq_none(vdev)) return -EINVAL; - vdev->ctx = kzalloc(nvec * sizeof(struct vfio_pci_irq_ctx), GFP_KERNEL); + vdev->ctx = kcalloc(nvec, sizeof(struct vfio_pci_irq_ctx), GFP_KERNEL); if (!vdev->ctx) return -ENOMEM; -- cgit From 2876a34466ce382a76b9ffb34757bb48928ac743 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 18 Oct 2016 16:30:09 -0400 Subject: sunrpc: don't pass on-stack memory to sg_set_buf As of ac4e97abce9b "scatterlist: sg_set_buf() argument must be in linear mapping", sg_set_buf hits a BUG when make_checksum_v2->xdr_process_buf, among other callers, passes it memory on the stack. We only need a scatterlist to pass this to the crypto code, and it seems like overkill to require kmalloc'd memory just to encrypt a few bytes, but for now this seems the best fix. Many of these callers are in the NFS write paths, so we allocate with GFP_NOFS. It might be possible to do without allocations here entirely, but that would probably be a bigger project. Cc: Rusty Russell Signed-off-by: J. Bruce Fields --- net/sunrpc/auth_gss/auth_gss.c | 13 ++++-- net/sunrpc/auth_gss/gss_krb5_crypto.c | 82 ++++++++++++++++++++--------------- net/sunrpc/auth_gss/svcauth_gss.c | 21 ++++++--- 3 files changed, 71 insertions(+), 45 deletions(-) diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index d8bd97a5a7c9..3dfd769dc5b5 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -1616,7 +1616,7 @@ gss_validate(struct rpc_task *task, __be32 *p) { struct rpc_cred *cred = task->tk_rqstp->rq_cred; struct gss_cl_ctx *ctx = gss_cred_get_ctx(cred); - __be32 seq; + __be32 *seq = NULL; struct kvec iov; struct xdr_buf verf_buf; struct xdr_netobj mic; @@ -1631,9 +1631,12 @@ gss_validate(struct rpc_task *task, __be32 *p) goto out_bad; if (flav != RPC_AUTH_GSS) goto out_bad; - seq = htonl(task->tk_rqstp->rq_seqno); - iov.iov_base = &seq; - iov.iov_len = sizeof(seq); + seq = kmalloc(4, GFP_NOFS); + if (!seq) + goto out_bad; + *seq = htonl(task->tk_rqstp->rq_seqno); + iov.iov_base = seq; + iov.iov_len = 4; xdr_buf_from_iov(&iov, &verf_buf); mic.data = (u8 *)p; mic.len = len; @@ -1653,11 +1656,13 @@ gss_validate(struct rpc_task *task, __be32 *p) gss_put_ctx(ctx); dprintk("RPC: %5u %s: gss_verify_mic succeeded.\n", task->tk_pid, __func__); + kfree(seq); return p + XDR_QUADLEN(len); out_bad: gss_put_ctx(ctx); dprintk("RPC: %5u %s failed ret %ld.\n", task->tk_pid, __func__, PTR_ERR(ret)); + kfree(seq); return ret; } diff --git a/net/sunrpc/auth_gss/gss_krb5_crypto.c b/net/sunrpc/auth_gss/gss_krb5_crypto.c index 244245bcbbd2..90115ceefd49 100644 --- a/net/sunrpc/auth_gss/gss_krb5_crypto.c +++ b/net/sunrpc/auth_gss/gss_krb5_crypto.c @@ -166,8 +166,8 @@ make_checksum_hmac_md5(struct krb5_ctx *kctx, char *header, int hdrlen, unsigned int usage, struct xdr_netobj *cksumout) { struct scatterlist sg[1]; - int err; - u8 checksumdata[GSS_KRB5_MAX_CKSUM_LEN]; + int err = -1; + u8 *checksumdata; u8 rc4salt[4]; struct crypto_ahash *md5; struct crypto_ahash *hmac_md5; @@ -187,23 +187,22 @@ make_checksum_hmac_md5(struct krb5_ctx *kctx, char *header, int hdrlen, return GSS_S_FAILURE; } + checksumdata = kmalloc(GSS_KRB5_MAX_CKSUM_LEN, GFP_NOFS); + if (!checksumdata) + return GSS_S_FAILURE; + md5 = crypto_alloc_ahash("md5", 0, CRYPTO_ALG_ASYNC); if (IS_ERR(md5)) - return GSS_S_FAILURE; + goto out_free_cksum; hmac_md5 = crypto_alloc_ahash(kctx->gk5e->cksum_name, 0, CRYPTO_ALG_ASYNC); - if (IS_ERR(hmac_md5)) { - crypto_free_ahash(md5); - return GSS_S_FAILURE; - } + if (IS_ERR(hmac_md5)) + goto out_free_md5; req = ahash_request_alloc(md5, GFP_KERNEL); - if (!req) { - crypto_free_ahash(hmac_md5); - crypto_free_ahash(md5); - return GSS_S_FAILURE; - } + if (!req) + goto out_free_hmac_md5; ahash_request_set_callback(req, CRYPTO_TFM_REQ_MAY_SLEEP, NULL, NULL); @@ -232,11 +231,8 @@ make_checksum_hmac_md5(struct krb5_ctx *kctx, char *header, int hdrlen, ahash_request_free(req); req = ahash_request_alloc(hmac_md5, GFP_KERNEL); - if (!req) { - crypto_free_ahash(hmac_md5); - crypto_free_ahash(md5); - return GSS_S_FAILURE; - } + if (!req) + goto out_free_hmac_md5; ahash_request_set_callback(req, CRYPTO_TFM_REQ_MAY_SLEEP, NULL, NULL); @@ -258,8 +254,12 @@ make_checksum_hmac_md5(struct krb5_ctx *kctx, char *header, int hdrlen, cksumout->len = kctx->gk5e->cksumlength; out: ahash_request_free(req); - crypto_free_ahash(md5); +out_free_hmac_md5: crypto_free_ahash(hmac_md5); +out_free_md5: + crypto_free_ahash(md5); +out_free_cksum: + kfree(checksumdata); return err ? GSS_S_FAILURE : 0; } @@ -276,8 +276,8 @@ make_checksum(struct krb5_ctx *kctx, char *header, int hdrlen, struct crypto_ahash *tfm; struct ahash_request *req; struct scatterlist sg[1]; - int err; - u8 checksumdata[GSS_KRB5_MAX_CKSUM_LEN]; + int err = -1; + u8 *checksumdata; unsigned int checksumlen; if (kctx->gk5e->ctype == CKSUMTYPE_HMAC_MD5_ARCFOUR) @@ -291,15 +291,17 @@ make_checksum(struct krb5_ctx *kctx, char *header, int hdrlen, return GSS_S_FAILURE; } + checksumdata = kmalloc(GSS_KRB5_MAX_CKSUM_LEN, GFP_NOFS); + if (checksumdata == NULL) + return GSS_S_FAILURE; + tfm = crypto_alloc_ahash(kctx->gk5e->cksum_name, 0, CRYPTO_ALG_ASYNC); if (IS_ERR(tfm)) - return GSS_S_FAILURE; + goto out_free_cksum; req = ahash_request_alloc(tfm, GFP_KERNEL); - if (!req) { - crypto_free_ahash(tfm); - return GSS_S_FAILURE; - } + if (!req) + goto out_free_ahash; ahash_request_set_callback(req, CRYPTO_TFM_REQ_MAY_SLEEP, NULL, NULL); @@ -349,7 +351,10 @@ make_checksum(struct krb5_ctx *kctx, char *header, int hdrlen, cksumout->len = kctx->gk5e->cksumlength; out: ahash_request_free(req); +out_free_ahash: crypto_free_ahash(tfm); +out_free_cksum: + kfree(checksumdata); return err ? GSS_S_FAILURE : 0; } @@ -368,8 +373,8 @@ make_checksum_v2(struct krb5_ctx *kctx, char *header, int hdrlen, struct crypto_ahash *tfm; struct ahash_request *req; struct scatterlist sg[1]; - int err; - u8 checksumdata[GSS_KRB5_MAX_CKSUM_LEN]; + int err = -1; + u8 *checksumdata; unsigned int checksumlen; if (kctx->gk5e->keyed_cksum == 0) { @@ -383,16 +388,18 @@ make_checksum_v2(struct krb5_ctx *kctx, char *header, int hdrlen, return GSS_S_FAILURE; } + checksumdata = kmalloc(GSS_KRB5_MAX_CKSUM_LEN, GFP_NOFS); + if (!checksumdata) + return GSS_S_FAILURE; + tfm = crypto_alloc_ahash(kctx->gk5e->cksum_name, 0, CRYPTO_ALG_ASYNC); if (IS_ERR(tfm)) - return GSS_S_FAILURE; + goto out_free_cksum; checksumlen = crypto_ahash_digestsize(tfm); req = ahash_request_alloc(tfm, GFP_KERNEL); - if (!req) { - crypto_free_ahash(tfm); - return GSS_S_FAILURE; - } + if (!req) + goto out_free_ahash; ahash_request_set_callback(req, CRYPTO_TFM_REQ_MAY_SLEEP, NULL, NULL); @@ -433,7 +440,10 @@ make_checksum_v2(struct krb5_ctx *kctx, char *header, int hdrlen, } out: ahash_request_free(req); +out_free_ahash: crypto_free_ahash(tfm); +out_free_cksum: + kfree(checksumdata); return err ? GSS_S_FAILURE : 0; } @@ -666,14 +676,17 @@ gss_krb5_cts_crypt(struct crypto_skcipher *cipher, struct xdr_buf *buf, u32 ret; struct scatterlist sg[1]; SKCIPHER_REQUEST_ON_STACK(req, cipher); - u8 data[GSS_KRB5_MAX_BLOCKSIZE * 2]; + u8 *data; struct page **save_pages; u32 len = buf->len - offset; - if (len > ARRAY_SIZE(data)) { + if (len > GSS_KRB5_MAX_BLOCKSIZE * 2) { WARN_ON(0); return -ENOMEM; } + data = kmalloc(GSS_KRB5_MAX_BLOCKSIZE * 2, GFP_NOFS); + if (!data) + return -ENOMEM; /* * For encryption, we want to read from the cleartext @@ -708,6 +721,7 @@ gss_krb5_cts_crypt(struct crypto_skcipher *cipher, struct xdr_buf *buf, ret = write_bytes_to_xdr_buf(buf, offset, data, len); out: + kfree(data); return ret; } diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index d67f7e1bc82d..45662d7f0943 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -718,30 +718,37 @@ gss_write_null_verf(struct svc_rqst *rqstp) static int gss_write_verf(struct svc_rqst *rqstp, struct gss_ctx *ctx_id, u32 seq) { - __be32 xdr_seq; + __be32 *xdr_seq; u32 maj_stat; struct xdr_buf verf_data; struct xdr_netobj mic; __be32 *p; struct kvec iov; + int err = -1; svc_putnl(rqstp->rq_res.head, RPC_AUTH_GSS); - xdr_seq = htonl(seq); + xdr_seq = kmalloc(4, GFP_KERNEL); + if (!xdr_seq) + return -1; + *xdr_seq = htonl(seq); - iov.iov_base = &xdr_seq; - iov.iov_len = sizeof(xdr_seq); + iov.iov_base = xdr_seq; + iov.iov_len = 4; xdr_buf_from_iov(&iov, &verf_data); p = rqstp->rq_res.head->iov_base + rqstp->rq_res.head->iov_len; mic.data = (u8 *)(p + 1); maj_stat = gss_get_mic(ctx_id, &verf_data, &mic); if (maj_stat != GSS_S_COMPLETE) - return -1; + goto out; *p++ = htonl(mic.len); memset((u8 *)p + mic.len, 0, round_up_to_quad(mic.len) - mic.len); p += XDR_QUADLEN(mic.len); if (!xdr_ressize_check(rqstp, p)) - return -1; - return 0; + goto out; + err = 0; +out: + kfree(xdr_seq); + return err; } struct gss_domain { -- cgit From 4d2b496f19f3c2cfaca1e8fa0710688b5ff3811d Mon Sep 17 00:00:00 2001 From: "Ewan D. Milne" Date: Wed, 26 Oct 2016 11:22:53 -0400 Subject: scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloaded map_storep was not being vfree()'d in the module_exit call. Cc: Signed-off-by: Ewan D. Milne Reviewed-by: Laurence Oberman Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_debug.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index c905709707f0..cf04a364fd8b 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -5134,6 +5134,7 @@ static void __exit scsi_debug_exit(void) bus_unregister(&pseudo_lld_bus); root_device_unregister(pseudo_primary); + vfree(map_storep); vfree(dif_storep); vfree(fake_storep); kfree(sdebug_q_arr); -- cgit From 2bf7dc8443e113844d078fd6541b7f4aa544f92f Mon Sep 17 00:00:00 2001 From: Ching Huang Date: Wed, 19 Oct 2016 17:50:26 +0800 Subject: scsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmware The arcmsr driver failed to pass SYNCHRONIZE CACHE to controller firmware. Depending on how drive caches are handled internally by controller firmware this could potentially lead to data integrity problems. Ensure that cache flushes are passed to the controller. [mkp: applied by hand and removed unused vars] Cc: Signed-off-by: Ching Huang Reported-by: Tomas Henzl Signed-off-by: Martin K. Petersen --- drivers/scsi/arcmsr/arcmsr_hba.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index 3d53d636b17b..f0cfb0451757 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -2636,18 +2636,9 @@ static int arcmsr_queue_command_lck(struct scsi_cmnd *cmd, struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata; struct CommandControlBlock *ccb; int target = cmd->device->id; - int lun = cmd->device->lun; - uint8_t scsicmd = cmd->cmnd[0]; cmd->scsi_done = done; cmd->host_scribble = NULL; cmd->result = 0; - if ((scsicmd == SYNCHRONIZE_CACHE) ||(scsicmd == SEND_DIAGNOSTIC)){ - if(acb->devstate[target][lun] == ARECA_RAID_GONE) { - cmd->result = (DID_NO_CONNECT << 16); - } - cmd->scsi_done(cmd); - return 0; - } if (target == 16) { /* virtual device for iop message transfer */ arcmsr_handle_virtual_command(acb, cmd); -- cgit From d1f63f0c81c22ba705fcd149a1fcec37b734d818 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 26 Oct 2016 15:04:41 +0000 Subject: mmc: sdhci-msm: Fix error return code in sdhci_msm_probe() Fix to return a negative error code from the platform_get_irq_byname() error handling case instead of 0, as done elsewhere in this function. Fixes: ad81d3871004 ("mmc: sdhci-msm: Add support for UHS cards") Signed-off-by: Wei Yongjun Acked-by: Adrian Hunter Acked-by: Georgi Djakov Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-msm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 8ef44a2a2fd9..90ed2e12d345 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -647,6 +647,7 @@ static int sdhci_msm_probe(struct platform_device *pdev) if (msm_host->pwr_irq < 0) { dev_err(&pdev->dev, "Get pwr_irq failed (%d)\n", msm_host->pwr_irq); + ret = msm_host->pwr_irq; goto clk_disable; } -- cgit From 58e3948a87e39289aeda5753e9712092c8ca0745 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 13 Oct 2016 13:10:57 +0200 Subject: KVM: document lock orders This is long overdue, and not really hard. Signed-off-by: Paolo Bonzini Message-Id: <1476357057-17899-1-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini --- Documentation/virtual/kvm/locking.txt | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/Documentation/virtual/kvm/locking.txt b/Documentation/virtual/kvm/locking.txt index f2491a8c68b4..e5dd9f4d6100 100644 --- a/Documentation/virtual/kvm/locking.txt +++ b/Documentation/virtual/kvm/locking.txt @@ -4,7 +4,17 @@ KVM Lock Overview 1. Acquisition Orders --------------------- -(to be written) +The acquisition orders for mutexes are as follows: + +- kvm->lock is taken outside vcpu->mutex + +- kvm->lock is taken outside kvm->slots_lock and kvm->irq_lock + +- kvm->slots_lock is taken outside kvm->irq_lock, though acquiring + them together is quite rare. + +For spinlocks, kvm_lock is taken outside kvm->mmu_lock. Everything +else is a leaf: no other lock is taken inside the critical sections. 2: Exception ------------ -- cgit From 85c856b39b479dde410ddd09df1da745343010c9 Mon Sep 17 00:00:00 2001 From: Jim Mattson Date: Wed, 26 Oct 2016 08:38:38 -0700 Subject: kvm: nVMX: Fix kernel panics induced by illegal INVEPT/INVVPID types Bitwise shifts by amounts greater than or equal to the width of the left operand are undefined. A malicious guest can exploit this to crash a 32-bit host, due to the BUG_ON(1)'s in handle_{invept,invvpid}. Signed-off-by: Jim Mattson Message-Id: <1477496318-17681-1-git-send-email-jmattson@google.com> [Change 1UL to 1, to match the range check on the shift count. - Paolo] Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index cf1b16dbc98a..74a4df993a51 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -7659,7 +7659,7 @@ static int handle_invept(struct kvm_vcpu *vcpu) types = (vmx->nested.nested_vmx_ept_caps >> VMX_EPT_EXTENT_SHIFT) & 6; - if (!(types & (1UL << type))) { + if (type >= 32 || !(types & (1 << type))) { nested_vmx_failValid(vcpu, VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID); skip_emulated_instruction(vcpu); @@ -7722,7 +7722,7 @@ static int handle_invvpid(struct kvm_vcpu *vcpu) types = (vmx->nested.nested_vmx_vpid_caps >> 8) & 0x7; - if (!(types & (1UL << type))) { + if (type >= 32 || !(types & (1 << type))) { nested_vmx_failValid(vcpu, VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID); skip_emulated_instruction(vcpu); -- cgit From d3532ea6ce4ea501e421d130555e59edc2945f99 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 18 Oct 2016 00:13:40 +0200 Subject: brcmfmac: avoid maybe-uninitialized warning in brcmf_cfg80211_start_ap MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A bugfix added a sanity check around the assignment and use of the 'is_11d' variable, which looks correct to me, but as the function is rather complex already, this confuses the compiler to the point where it can no longer figure out if the variable is always initialized correctly: brcm80211/brcmfmac/cfg80211.c: In function ‘brcmf_cfg80211_start_ap’: brcm80211/brcmfmac/cfg80211.c:4586:10: error: ‘is_11d’ may be used uninitialized in this function [-Werror=maybe-uninitialized] This adds an initialization for the newly introduced case in which the variable should not really be used, in order to make the warning go away. Fixes: b3589dfe0212 ("brcmfmac: ignore 11d configuration errors") Cc: Hante Meuleman Cc: Arend van Spriel Cc: Kalle Valo Signed-off-by: Arnd Bergmann Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index b777e1b2f87a..78d9966a3957 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -4516,7 +4516,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, /* store current 11d setting */ if (brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_REGULATORY, &ifp->vif->is_11d)) { - supports_11d = false; + is_11d = supports_11d = false; } else { country_ie = brcmf_parse_tlvs((u8 *)settings->beacon.tail, settings->beacon.tail_len, -- cgit From a74ad5e660a9ee1d071665e7e8ad822784a2dc7f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 27 Oct 2016 09:04:54 -0700 Subject: sparc64: Handle extremely large kernel TLB range flushes more gracefully. When the vmalloc area gets fragmented, and because the firmware mapping area sits between where modules live and the vmalloc area, we can sometimes receive requests for enormous kernel TLB range flushes. When this happens the cpu just spins flushing billions of pages and this triggers the NMI watchdog and other problems. We took care of this on the TSB side by doing a linear scan of the table once we pass a certain threshold. Do something similar for the TLB flush, however we are limited by the TLB flush facilities provided by the different chip variants. First of all we use an (mostly arbitrary) cut-off of 256K which is about 32 pages. This can be tuned in the future. The huge range code path for each chip works as follows: 1) On spitfire we flush all non-locked TLB entries using diagnostic acceses. 2) On cheetah we use the "flush all" TLB flush. 3) On sun4v/hypervisor we do a TLB context flush on context 0, which unlike previous chips does not remove "permanent" or locked entries. We could probably do something better on spitfire, such as limiting the flush to kernel TLB entries or even doing range comparisons. However that probably isn't worth it since those chips are old and the TLB only had 64 entries. Reported-by: James Clarke Tested-by: James Clarke Signed-off-by: David S. Miller --- arch/sparc/mm/ultra.S | 283 ++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 228 insertions(+), 55 deletions(-) diff --git a/arch/sparc/mm/ultra.S b/arch/sparc/mm/ultra.S index 0fa2e6202c1f..5d2fd6cd3189 100644 --- a/arch/sparc/mm/ultra.S +++ b/arch/sparc/mm/ultra.S @@ -113,12 +113,14 @@ __flush_tlb_pending: /* 27 insns */ .align 32 .globl __flush_tlb_kernel_range -__flush_tlb_kernel_range: /* 19 insns */ +__flush_tlb_kernel_range: /* 31 insns */ /* %o0=start, %o1=end */ cmp %o0, %o1 be,pn %xcc, 2f + sub %o1, %o0, %o3 + srlx %o3, 18, %o4 + brnz,pn %o4, __spitfire_flush_tlb_kernel_range_slow sethi %hi(PAGE_SIZE), %o4 - sub %o1, %o0, %o3 sub %o3, %o4, %o3 or %o0, 0x20, %o0 ! Nucleus 1: stxa %g0, [%o0 + %o3] ASI_DMMU_DEMAP @@ -134,6 +136,38 @@ __flush_tlb_kernel_range: /* 19 insns */ nop nop nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + +__spitfire_flush_tlb_kernel_range_slow: + mov 63 * 8, %o4 +1: ldxa [%o4] ASI_ITLB_DATA_ACCESS, %o3 + andcc %o3, 0x40, %g0 /* _PAGE_L_4U */ + bne,pn %xcc, 2f + mov TLB_TAG_ACCESS, %o3 + stxa %g0, [%o3] ASI_IMMU + stxa %g0, [%o4] ASI_ITLB_DATA_ACCESS + membar #Sync +2: ldxa [%o4] ASI_DTLB_DATA_ACCESS, %o3 + andcc %o3, 0x40, %g0 + bne,pn %xcc, 2f + mov TLB_TAG_ACCESS, %o3 + stxa %g0, [%o3] ASI_DMMU + stxa %g0, [%o4] ASI_DTLB_DATA_ACCESS + membar #Sync +2: sub %o4, 8, %o4 + brgez,pt %o4, 1b + nop + retl + nop __spitfire_flush_tlb_mm_slow: rdpr %pstate, %g1 @@ -288,6 +322,40 @@ __cheetah_flush_tlb_pending: /* 27 insns */ retl wrpr %g7, 0x0, %pstate +__cheetah_flush_tlb_kernel_range: /* 31 insns */ + /* %o0=start, %o1=end */ + cmp %o0, %o1 + be,pn %xcc, 2f + sub %o1, %o0, %o3 + srlx %o3, 18, %o4 + brnz,pn %o4, 3f + sethi %hi(PAGE_SIZE), %o4 + sub %o3, %o4, %o3 + or %o0, 0x20, %o0 ! Nucleus +1: stxa %g0, [%o0 + %o3] ASI_DMMU_DEMAP + stxa %g0, [%o0 + %o3] ASI_IMMU_DEMAP + membar #Sync + brnz,pt %o3, 1b + sub %o3, %o4, %o3 +2: sethi %hi(KERNBASE), %o3 + flush %o3 + retl + nop +3: mov 0x80, %o4 + stxa %g0, [%o4] ASI_DMMU_DEMAP + membar #Sync + stxa %g0, [%o4] ASI_IMMU_DEMAP + membar #Sync + retl + nop + nop + nop + nop + nop + nop + nop + nop + #ifdef DCACHE_ALIASING_POSSIBLE __cheetah_flush_dcache_page: /* 11 insns */ sethi %hi(PAGE_OFFSET), %g1 @@ -388,13 +456,15 @@ __hypervisor_flush_tlb_pending: /* 27 insns */ nop nop -__hypervisor_flush_tlb_kernel_range: /* 19 insns */ +__hypervisor_flush_tlb_kernel_range: /* 31 insns */ /* %o0=start, %o1=end */ cmp %o0, %o1 be,pn %xcc, 2f - sethi %hi(PAGE_SIZE), %g3 - mov %o0, %g1 - sub %o1, %g1, %g2 + sub %o1, %o0, %g2 + srlx %g2, 18, %g3 + brnz,pn %g3, 4f + mov %o0, %g1 + sethi %hi(PAGE_SIZE), %g3 sub %g2, %g3, %g2 1: add %g1, %g2, %o0 /* ARG0: virtual address */ mov 0, %o1 /* ARG1: mmu context */ @@ -409,6 +479,16 @@ __hypervisor_flush_tlb_kernel_range: /* 19 insns */ 3: sethi %hi(__hypervisor_tlb_tl0_error), %o2 jmpl %o2 + %lo(__hypervisor_tlb_tl0_error), %g0 nop +4: mov 0, %o0 /* ARG0: CPU lists unimplemented */ + mov 0, %o1 /* ARG1: CPU lists unimplemented */ + mov 0, %o2 /* ARG2: mmu context == nucleus */ + mov HV_MMU_ALL, %o3 /* ARG3: flags */ + mov HV_FAST_MMU_DEMAP_CTX, %o5 + ta HV_FAST_TRAP + brnz,pn %o0, 3b + mov HV_FAST_MMU_DEMAP_CTX, %o1 + retl + nop #ifdef DCACHE_ALIASING_POSSIBLE /* XXX Niagara and friends have an 8K cache, so no aliasing is @@ -431,43 +511,6 @@ tlb_patch_one: retl nop - .globl cheetah_patch_cachetlbops -cheetah_patch_cachetlbops: - save %sp, -128, %sp - - sethi %hi(__flush_tlb_mm), %o0 - or %o0, %lo(__flush_tlb_mm), %o0 - sethi %hi(__cheetah_flush_tlb_mm), %o1 - or %o1, %lo(__cheetah_flush_tlb_mm), %o1 - call tlb_patch_one - mov 19, %o2 - - sethi %hi(__flush_tlb_page), %o0 - or %o0, %lo(__flush_tlb_page), %o0 - sethi %hi(__cheetah_flush_tlb_page), %o1 - or %o1, %lo(__cheetah_flush_tlb_page), %o1 - call tlb_patch_one - mov 22, %o2 - - sethi %hi(__flush_tlb_pending), %o0 - or %o0, %lo(__flush_tlb_pending), %o0 - sethi %hi(__cheetah_flush_tlb_pending), %o1 - or %o1, %lo(__cheetah_flush_tlb_pending), %o1 - call tlb_patch_one - mov 27, %o2 - -#ifdef DCACHE_ALIASING_POSSIBLE - sethi %hi(__flush_dcache_page), %o0 - or %o0, %lo(__flush_dcache_page), %o0 - sethi %hi(__cheetah_flush_dcache_page), %o1 - or %o1, %lo(__cheetah_flush_dcache_page), %o1 - call tlb_patch_one - mov 11, %o2 -#endif /* DCACHE_ALIASING_POSSIBLE */ - - ret - restore - #ifdef CONFIG_SMP /* These are all called by the slaves of a cross call, at * trap level 1, with interrupts fully disabled. @@ -535,13 +578,15 @@ xcall_flush_tlb_page: /* 20 insns */ nop .globl xcall_flush_tlb_kernel_range -xcall_flush_tlb_kernel_range: /* 28 insns */ +xcall_flush_tlb_kernel_range: /* 44 insns */ sethi %hi(PAGE_SIZE - 1), %g2 or %g2, %lo(PAGE_SIZE - 1), %g2 andn %g1, %g2, %g1 andn %g7, %g2, %g7 sub %g7, %g1, %g3 - add %g2, 1, %g2 + srlx %g3, 18, %g2 + brnz,pn %g2, 2f + add %g2, 1, %g2 sub %g3, %g2, %g3 or %g1, 0x20, %g1 ! Nucleus 1: stxa %g0, [%g1 + %g3] ASI_DMMU_DEMAP @@ -550,11 +595,25 @@ xcall_flush_tlb_kernel_range: /* 28 insns */ brnz,pt %g3, 1b sub %g3, %g2, %g3 retry - nop - nop - nop - nop - nop +2: mov 63 * 8, %g1 +1: ldxa [%g1] ASI_ITLB_DATA_ACCESS, %g2 + andcc %g2, 0x40, %g0 /* _PAGE_L_4U */ + bne,pn %xcc, 2f + mov TLB_TAG_ACCESS, %g2 + stxa %g0, [%g2] ASI_IMMU + stxa %g0, [%g1] ASI_ITLB_DATA_ACCESS + membar #Sync +2: ldxa [%g1] ASI_DTLB_DATA_ACCESS, %g2 + andcc %g2, 0x40, %g0 + bne,pn %xcc, 2f + mov TLB_TAG_ACCESS, %g2 + stxa %g0, [%g2] ASI_DMMU + stxa %g0, [%g1] ASI_DTLB_DATA_ACCESS + membar #Sync +2: sub %g1, 8, %g1 + brgez,pt %g1, 1b + nop + retry nop nop nop @@ -683,6 +742,52 @@ xcall_fetch_glob_pmu_n4: retry +__cheetah_xcall_flush_tlb_kernel_range: /* 44 insns */ + sethi %hi(PAGE_SIZE - 1), %g2 + or %g2, %lo(PAGE_SIZE - 1), %g2 + andn %g1, %g2, %g1 + andn %g7, %g2, %g7 + sub %g7, %g1, %g3 + srlx %g3, 18, %g2 + brnz,pn %g2, 2f + add %g2, 1, %g2 + sub %g3, %g2, %g3 + or %g1, 0x20, %g1 ! Nucleus +1: stxa %g0, [%g1 + %g3] ASI_DMMU_DEMAP + stxa %g0, [%g1 + %g3] ASI_IMMU_DEMAP + membar #Sync + brnz,pt %g3, 1b + sub %g3, %g2, %g3 + retry +2: mov 0x80, %g2 + stxa %g0, [%g2] ASI_DMMU_DEMAP + membar #Sync + stxa %g0, [%g2] ASI_IMMU_DEMAP + membar #Sync + retry + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + #ifdef DCACHE_ALIASING_POSSIBLE .align 32 .globl xcall_flush_dcache_page_cheetah @@ -798,18 +903,20 @@ __hypervisor_xcall_flush_tlb_page: /* 20 insns */ nop .globl __hypervisor_xcall_flush_tlb_kernel_range -__hypervisor_xcall_flush_tlb_kernel_range: /* 28 insns */ +__hypervisor_xcall_flush_tlb_kernel_range: /* 44 insns */ /* %g1=start, %g7=end, g2,g3,g4,g5,g6=scratch */ sethi %hi(PAGE_SIZE - 1), %g2 or %g2, %lo(PAGE_SIZE - 1), %g2 andn %g1, %g2, %g1 andn %g7, %g2, %g7 sub %g7, %g1, %g3 + srlx %g3, 18, %g7 add %g2, 1, %g2 sub %g3, %g2, %g3 mov %o0, %g2 mov %o1, %g4 - mov %o2, %g7 + brnz,pn %g7, 2f + mov %o2, %g7 1: add %g1, %g3, %o0 /* ARG0: virtual address */ mov 0, %o1 /* ARG1: mmu context */ mov HV_MMU_ALL, %o2 /* ARG2: flags */ @@ -820,7 +927,7 @@ __hypervisor_xcall_flush_tlb_kernel_range: /* 28 insns */ sethi %hi(PAGE_SIZE), %o2 brnz,pt %g3, 1b sub %g3, %o2, %g3 - mov %g2, %o0 +5: mov %g2, %o0 mov %g4, %o1 mov %g7, %o2 membar #Sync @@ -828,6 +935,20 @@ __hypervisor_xcall_flush_tlb_kernel_range: /* 28 insns */ 1: sethi %hi(__hypervisor_tlb_xcall_error), %g4 jmpl %g4 + %lo(__hypervisor_tlb_xcall_error), %g0 nop +2: mov %o3, %g1 + mov %o5, %g3 + mov 0, %o0 /* ARG0: CPU lists unimplemented */ + mov 0, %o1 /* ARG1: CPU lists unimplemented */ + mov 0, %o2 /* ARG2: mmu context == nucleus */ + mov HV_MMU_ALL, %o3 /* ARG3: flags */ + mov HV_FAST_MMU_DEMAP_CTX, %o5 + ta HV_FAST_TRAP + mov %g1, %o3 + brz,pt %o0, 5b + mov %g3, %o5 + mov HV_FAST_MMU_DEMAP_CTX, %g6 + ba,pt %xcc, 1b + clr %g5 /* These just get rescheduled to PIL vectors. */ .globl xcall_call_function @@ -864,6 +985,58 @@ xcall_kgdb_capture: #endif /* CONFIG_SMP */ + .globl cheetah_patch_cachetlbops +cheetah_patch_cachetlbops: + save %sp, -128, %sp + + sethi %hi(__flush_tlb_mm), %o0 + or %o0, %lo(__flush_tlb_mm), %o0 + sethi %hi(__cheetah_flush_tlb_mm), %o1 + or %o1, %lo(__cheetah_flush_tlb_mm), %o1 + call tlb_patch_one + mov 19, %o2 + + sethi %hi(__flush_tlb_page), %o0 + or %o0, %lo(__flush_tlb_page), %o0 + sethi %hi(__cheetah_flush_tlb_page), %o1 + or %o1, %lo(__cheetah_flush_tlb_page), %o1 + call tlb_patch_one + mov 22, %o2 + + sethi %hi(__flush_tlb_pending), %o0 + or %o0, %lo(__flush_tlb_pending), %o0 + sethi %hi(__cheetah_flush_tlb_pending), %o1 + or %o1, %lo(__cheetah_flush_tlb_pending), %o1 + call tlb_patch_one + mov 27, %o2 + + sethi %hi(__flush_tlb_kernel_range), %o0 + or %o0, %lo(__flush_tlb_kernel_range), %o0 + sethi %hi(__cheetah_flush_tlb_kernel_range), %o1 + or %o1, %lo(__cheetah_flush_tlb_kernel_range), %o1 + call tlb_patch_one + mov 31, %o2 + +#ifdef DCACHE_ALIASING_POSSIBLE + sethi %hi(__flush_dcache_page), %o0 + or %o0, %lo(__flush_dcache_page), %o0 + sethi %hi(__cheetah_flush_dcache_page), %o1 + or %o1, %lo(__cheetah_flush_dcache_page), %o1 + call tlb_patch_one + mov 11, %o2 +#endif /* DCACHE_ALIASING_POSSIBLE */ + +#ifdef CONFIG_SMP + sethi %hi(xcall_flush_tlb_kernel_range), %o0 + or %o0, %lo(xcall_flush_tlb_kernel_range), %o0 + sethi %hi(__cheetah_xcall_flush_tlb_kernel_range), %o1 + or %o1, %lo(__cheetah_xcall_flush_tlb_kernel_range), %o1 + call tlb_patch_one + mov 44, %o2 +#endif /* CONFIG_SMP */ + + ret + restore .globl hypervisor_patch_cachetlbops hypervisor_patch_cachetlbops: @@ -895,7 +1068,7 @@ hypervisor_patch_cachetlbops: sethi %hi(__hypervisor_flush_tlb_kernel_range), %o1 or %o1, %lo(__hypervisor_flush_tlb_kernel_range), %o1 call tlb_patch_one - mov 19, %o2 + mov 31, %o2 #ifdef DCACHE_ALIASING_POSSIBLE sethi %hi(__flush_dcache_page), %o0 @@ -926,7 +1099,7 @@ hypervisor_patch_cachetlbops: sethi %hi(__hypervisor_xcall_flush_tlb_kernel_range), %o1 or %o1, %lo(__hypervisor_xcall_flush_tlb_kernel_range), %o1 call tlb_patch_one - mov 28, %o2 + mov 44, %o2 #endif /* CONFIG_SMP */ ret -- cgit From bb6a6e8e091353770074608c1d1bfde0e20b8154 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sat, 22 Oct 2016 18:51:24 +0800 Subject: netfilter: nft_dynset: fix panic if NFT_SET_HASH is not enabled When CONFIG_NFT_SET_HASH is not enabled and I input the following rule: "nft add rule filter output flow table test {ip daddr counter }", kernel panic happened on my system: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) [...] Call Trace: [] ? nft_dynset_eval+0x56/0x100 [nf_tables] [] nft_do_chain+0xfb/0x4e0 [nf_tables] [] ? nf_conntrack_tuple_taken+0x61/0x210 [nf_conntrack] [] ? get_unique_tuple+0x136/0x560 [nf_nat] [] ? __nf_ct_ext_add_length+0x111/0x130 [nf_conntrack] [] ? nf_nat_setup_info+0x87/0x3b0 [nf_nat] [] ? ipt_do_table+0x327/0x610 [] ? __nf_nat_alloc_null_binding+0x57/0x80 [nf_nat] [] nft_ipv4_output+0xaf/0xd0 [nf_tables_ipv4] [] nf_iterate+0x55/0x60 [] nf_hook_slow+0x73/0xd0 Because in rbtree type set, ops->update is not implemented. So just keep it simple, in such case, report -EOPNOTSUPP to the user space. Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates") Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_dynset.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c index 517f08767a3c..bfdb689664b0 100644 --- a/net/netfilter/nft_dynset.c +++ b/net/netfilter/nft_dynset.c @@ -139,6 +139,9 @@ static int nft_dynset_init(const struct nft_ctx *ctx, return PTR_ERR(set); } + if (set->ops->update == NULL) + return -EOPNOTSUPP; + if (set->flags & NFT_SET_CONSTANT) return -EBUSY; -- cgit From 61f9e2924f4981d626b3a931fed935f2fa3cb4de Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sat, 22 Oct 2016 18:51:25 +0800 Subject: netfilter: nf_tables: fix *leak* when expr clone fail When nft_expr_clone failed, a series of problems will happen: 1. module refcnt will leak, we call __module_get at the beginning but we forget to put it back if ops->clone returns fail 2. memory will be leaked, if clone fail, we just return NULL and forget to free the alloced element 3. set->nelems will become incorrect when set->size is specified. If clone fail, we should decrease the set->nelems Now this patch fixes these problems. And fortunately, clone fail will only happen on counter expression when memory is exhausted. Fixes: 086f332167d6 ("netfilter: nf_tables: add clone interface to expression operations") Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tables.h | 6 ++++-- net/netfilter/nf_tables_api.c | 11 ++++++----- net/netfilter/nft_dynset.c | 16 ++++++++++------ net/netfilter/nft_set_hash.c | 4 ++-- net/netfilter/nft_set_rbtree.c | 2 +- 5 files changed, 23 insertions(+), 16 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 5031e072567b..741dcded5b4f 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -542,7 +542,8 @@ void *nft_set_elem_init(const struct nft_set *set, const struct nft_set_ext_tmpl *tmpl, const u32 *key, const u32 *data, u64 timeout, gfp_t gfp); -void nft_set_elem_destroy(const struct nft_set *set, void *elem); +void nft_set_elem_destroy(const struct nft_set *set, void *elem, + bool destroy_expr); /** * struct nft_set_gc_batch_head - nf_tables set garbage collection batch @@ -693,7 +694,6 @@ static inline int nft_expr_clone(struct nft_expr *dst, struct nft_expr *src) { int err; - __module_get(src->ops->type->owner); if (src->ops->clone) { dst->ops = src->ops; err = src->ops->clone(dst, src); @@ -702,6 +702,8 @@ static inline int nft_expr_clone(struct nft_expr *dst, struct nft_expr *src) } else { memcpy(dst, src, src->ops->size); } + + __module_get(src->ops->type->owner); return 0; } diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 24db22257586..86e48aeb20be 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -3452,14 +3452,15 @@ void *nft_set_elem_init(const struct nft_set *set, return elem; } -void nft_set_elem_destroy(const struct nft_set *set, void *elem) +void nft_set_elem_destroy(const struct nft_set *set, void *elem, + bool destroy_expr) { struct nft_set_ext *ext = nft_set_elem_ext(set, elem); nft_data_uninit(nft_set_ext_key(ext), NFT_DATA_VALUE); if (nft_set_ext_exists(ext, NFT_SET_EXT_DATA)) nft_data_uninit(nft_set_ext_data(ext), set->dtype); - if (nft_set_ext_exists(ext, NFT_SET_EXT_EXPR)) + if (destroy_expr && nft_set_ext_exists(ext, NFT_SET_EXT_EXPR)) nf_tables_expr_destroy(NULL, nft_set_ext_expr(ext)); kfree(elem); @@ -3812,7 +3813,7 @@ void nft_set_gc_batch_release(struct rcu_head *rcu) gcb = container_of(rcu, struct nft_set_gc_batch, head.rcu); for (i = 0; i < gcb->head.cnt; i++) - nft_set_elem_destroy(gcb->head.set, gcb->elems[i]); + nft_set_elem_destroy(gcb->head.set, gcb->elems[i], true); kfree(gcb); } EXPORT_SYMBOL_GPL(nft_set_gc_batch_release); @@ -4030,7 +4031,7 @@ static void nf_tables_commit_release(struct nft_trans *trans) break; case NFT_MSG_DELSETELEM: nft_set_elem_destroy(nft_trans_elem_set(trans), - nft_trans_elem(trans).priv); + nft_trans_elem(trans).priv, true); break; } kfree(trans); @@ -4171,7 +4172,7 @@ static void nf_tables_abort_release(struct nft_trans *trans) break; case NFT_MSG_NEWSETELEM: nft_set_elem_destroy(nft_trans_elem_set(trans), - nft_trans_elem(trans).priv); + nft_trans_elem(trans).priv, true); break; } kfree(trans); diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c index bfdb689664b0..31ca94793aa9 100644 --- a/net/netfilter/nft_dynset.c +++ b/net/netfilter/nft_dynset.c @@ -44,18 +44,22 @@ static void *nft_dynset_new(struct nft_set *set, const struct nft_expr *expr, ®s->data[priv->sreg_key], ®s->data[priv->sreg_data], timeout, GFP_ATOMIC); - if (elem == NULL) { - if (set->size) - atomic_dec(&set->nelems); - return NULL; - } + if (elem == NULL) + goto err1; ext = nft_set_elem_ext(set, elem); if (priv->expr != NULL && nft_expr_clone(nft_set_ext_expr(ext), priv->expr) < 0) - return NULL; + goto err2; return elem; + +err2: + nft_set_elem_destroy(set, elem, false); +err1: + if (set->size) + atomic_dec(&set->nelems); + return NULL; } static void nft_dynset_eval(const struct nft_expr *expr, diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index 3794cb2fc788..88d9fc8343e7 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -120,7 +120,7 @@ out: return true; err2: - nft_set_elem_destroy(set, he); + nft_set_elem_destroy(set, he, true); err1: return false; } @@ -332,7 +332,7 @@ static int nft_hash_init(const struct nft_set *set, static void nft_hash_elem_destroy(void *ptr, void *arg) { - nft_set_elem_destroy((const struct nft_set *)arg, ptr); + nft_set_elem_destroy((const struct nft_set *)arg, ptr, true); } static void nft_hash_destroy(const struct nft_set *set) diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c index 38b5bda242f8..36493a7cae88 100644 --- a/net/netfilter/nft_set_rbtree.c +++ b/net/netfilter/nft_set_rbtree.c @@ -266,7 +266,7 @@ static void nft_rbtree_destroy(const struct nft_set *set) while ((node = priv->root.rb_node) != NULL) { rb_erase(node, &priv->root); rbe = rb_entry(node, struct nft_rbtree_elem, node); - nft_set_elem_destroy(set, rbe); + nft_set_elem_destroy(set, rbe, true); } } -- cgit From dab45060a56a9732b027d2031c1b6100bc75eea2 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sat, 22 Oct 2016 18:51:26 +0800 Subject: netfilter: nf_tables: fix race when create new element in dynset Packets may race when create the new element in nft_hash_update: CPU0 CPU1 lookup_fast - fail lookup_fast - fail new - ok new - ok insert - ok insert - fail(EEXIST) So when race happened, we reuse the existing element. Otherwise, these *racing* packets will not be handled properly. Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates") Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_set_hash.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index 88d9fc8343e7..a3dface3e6e6 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -98,7 +98,7 @@ static bool nft_hash_update(struct nft_set *set, const u32 *key, const struct nft_set_ext **ext) { struct nft_hash *priv = nft_set_priv(set); - struct nft_hash_elem *he; + struct nft_hash_elem *he, *prev; struct nft_hash_cmp_arg arg = { .genmask = NFT_GENMASK_ANY, .set = set, @@ -112,9 +112,18 @@ static bool nft_hash_update(struct nft_set *set, const u32 *key, he = new(set, expr, regs); if (he == NULL) goto err1; - if (rhashtable_lookup_insert_key(&priv->ht, &arg, &he->node, - nft_hash_params)) + + prev = rhashtable_lookup_get_insert_key(&priv->ht, &arg, &he->node, + nft_hash_params); + if (IS_ERR(prev)) goto err2; + + /* Another cpu may race to insert the element with the same key */ + if (prev) { + nft_set_elem_destroy(set, he, true); + he = prev; + } + out: *ext = &he->ext; return true; -- cgit From 444f901742d054a4cd5ff045871eac5131646cfb Mon Sep 17 00:00:00 2001 From: Ulrich Weber Date: Mon, 24 Oct 2016 18:07:23 +0200 Subject: netfilter: nf_conntrack_sip: extend request line validation on SIP requests, so a fragmented TCP SIP packet from an allow header starting with INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE Content-Length: 0 will not bet interpreted as an INVITE request. Also Request-URI must start with an alphabetic character. Confirm with RFC 3261 Request-Line = Method SP Request-URI SP SIP-Version CRLF Fixes: 30f33e6dee80 ("[NETFILTER]: nf_conntrack_sip: support method specific request/response handling") Signed-off-by: Ulrich Weber Acked-by: Marco Angaroni Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_sip.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 621b81c7bddc..c3fc14e021ec 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -1436,9 +1436,12 @@ static int process_sip_request(struct sk_buff *skb, unsigned int protoff, handler = &sip_handlers[i]; if (handler->request == NULL) continue; - if (*datalen < handler->len || + if (*datalen < handler->len + 2 || strncasecmp(*dptr, handler->method, handler->len)) continue; + if ((*dptr)[handler->len] != ' ' || + !isalpha((*dptr)[handler->len+1])) + continue; if (ct_sip_get_header(ct, *dptr, 0, *datalen, SIP_HDR_CSEQ, &matchoff, &matchlen) <= 0) { -- cgit From f1d505bb762e30bf316ff5d3b604914649d6aed3 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 25 Oct 2016 15:56:39 -0400 Subject: netfilter: nf_tables: fix type mismatch with error return from nft_parse_u32_check Commit 36b701fae12ac ("netfilter: nf_tables: validate maximum value of u32 netlink attributes") introduced nft_parse_u32_check with a return value of "unsigned int", yet on error it returns "-ERANGE". This patch corrects the mismatch by changing the return value to "int", which happens to match the actual users of nft_parse_u32_check already. Found by Coverity, CID 1373930. Note that commit 21a9e0f1568ea ("netfilter: nft_exthdr: fix error handling in nft_exthdr_init()) attempted to address the issue, but did not address the return type of nft_parse_u32_check. Signed-off-by: John W. Linville Cc: Laura Garcia Liebana Cc: Pablo Neira Ayuso Cc: Dan Carpenter Fixes: 36b701fae12ac ("netfilter: nf_tables: validate maximum value...") Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tables.h | 2 +- net/netfilter/nf_tables_api.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 741dcded5b4f..d79d1e9b9546 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -145,7 +145,7 @@ static inline enum nft_registers nft_type_to_reg(enum nft_data_types type) return type == NFT_DATA_VERDICT ? NFT_REG_VERDICT : NFT_REG_1 * NFT_REG_SIZE / NFT_REG32_SIZE; } -unsigned int nft_parse_u32_check(const struct nlattr *attr, int max, u32 *dest); +int nft_parse_u32_check(const struct nlattr *attr, int max, u32 *dest); unsigned int nft_parse_register(const struct nlattr *attr); int nft_dump_register(struct sk_buff *skb, unsigned int attr, unsigned int reg); diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 86e48aeb20be..365d31b86816 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4422,7 +4422,7 @@ static int nf_tables_check_loops(const struct nft_ctx *ctx, * Otherwise a 0 is returned and the attribute value is stored in the * destination variable. */ -unsigned int nft_parse_u32_check(const struct nlattr *attr, int max, u32 *dest) +int nft_parse_u32_check(const struct nlattr *attr, int max, u32 *dest) { u32 val; -- cgit From cdb436d181d21af4d273b49ec7734eecd6a37fe9 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 26 Oct 2016 23:46:17 +0200 Subject: netfilter: conntrack: avoid excess memory allocation This is now a fixed-size extension, so we don't need to pass a variable alloc size. This (harmless) error results in allocating 32 instead of the needed 16 bytes for this extension as the size gets passed twice. Fixes: 23014011ba420 ("netfilter: conntrack: support a fixed size of 128 distinct labels") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_conntrack_labels.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/net/netfilter/nf_conntrack_labels.h b/include/net/netfilter/nf_conntrack_labels.h index 498814626e28..1723a67c0b0a 100644 --- a/include/net/netfilter/nf_conntrack_labels.h +++ b/include/net/netfilter/nf_conntrack_labels.h @@ -30,8 +30,7 @@ static inline struct nf_conn_labels *nf_ct_labels_ext_add(struct nf_conn *ct) if (net->ct.labels_used == 0) return NULL; - return nf_ct_ext_add_length(ct, NF_CT_EXT_LABELS, - sizeof(struct nf_conn_labels), GFP_ATOMIC); + return nf_ct_ext_add(ct, NF_CT_EXT_LABELS, GFP_ATOMIC); #else return NULL; #endif -- cgit From 71451bdfc2f7bc67cf0b7a5d51bc1489aaa55701 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 26 Oct 2016 15:27:45 -0400 Subject: drm/amdgpu/si_dpm: workaround for SI kickers Consolidate existing quirks. Fixes stability issues on some kickers. Acked-by: Huang Rui Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/si_dpm.c | 59 +++++++++++++++++++++++++++---------- 1 file changed, 43 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c index ee77e9cb55b1..d6f85b1a0b93 100644 --- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c @@ -3477,6 +3477,49 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev, int i; struct si_dpm_quirk *p = si_dpm_quirk_list; + /* limit all SI kickers */ + if (adev->asic_type == CHIP_PITCAIRN) { + if ((adev->pdev->revision == 0x81) || + (adev->pdev->device == 0x6810) || + (adev->pdev->device == 0x6811) || + (adev->pdev->device == 0x6816) || + (adev->pdev->device == 0x6817) || + (adev->pdev->device == 0x6806)) + max_mclk = 120000; + } else if (adev->asic_type == CHIP_VERDE) { + if ((adev->pdev->revision == 0x81) || + (adev->pdev->revision == 0x83) || + (adev->pdev->revision == 0x87) || + (adev->pdev->device == 0x6820) || + (adev->pdev->device == 0x6821) || + (adev->pdev->device == 0x6822) || + (adev->pdev->device == 0x6823) || + (adev->pdev->device == 0x682A) || + (adev->pdev->device == 0x682B)) { + max_sclk = 75000; + max_mclk = 80000; + } + } else if (adev->asic_type == CHIP_OLAND) { + if ((adev->pdev->revision == 0xC7) || + (adev->pdev->revision == 0x80) || + (adev->pdev->revision == 0x81) || + (adev->pdev->revision == 0x83) || + (adev->pdev->device == 0x6604) || + (adev->pdev->device == 0x6605)) { + max_sclk = 75000; + max_mclk = 80000; + } + } else if (adev->asic_type == CHIP_HAINAN) { + if ((adev->pdev->revision == 0x81) || + (adev->pdev->revision == 0x83) || + (adev->pdev->revision == 0xC3) || + (adev->pdev->device == 0x6664) || + (adev->pdev->device == 0x6665) || + (adev->pdev->device == 0x6667)) { + max_sclk = 75000; + max_mclk = 80000; + } + } /* Apply dpm quirks */ while (p && p->chip_device != 0) { if (adev->pdev->vendor == p->chip_vendor && @@ -3489,22 +3532,6 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev, } ++p; } - /* limit mclk on all R7 370 parts for stability */ - if (adev->pdev->device == 0x6811 && - adev->pdev->revision == 0x81) - max_mclk = 120000; - /* limit sclk/mclk on Jet parts for stability */ - if (adev->pdev->device == 0x6665 && - adev->pdev->revision == 0xc3) { - max_sclk = 75000; - max_mclk = 80000; - } - /* Limit clocks for some HD8600 parts */ - if (adev->pdev->device == 0x6660 && - adev->pdev->revision == 0x83) { - max_sclk = 75000; - max_mclk = 80000; - } if (rps->vce_active) { rps->evclk = adev->pm.dpm.vce_states[adev->pm.dpm.vce_level].evclk; -- cgit From a2941d01267437b6edcd3e769ae9a461fe36ae62 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 26 Oct 2016 12:56:07 +0800 Subject: drm/amd/powerplay: fix bug get wrong evv voltage of Polaris. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rex Zhu Acked-by: Christian König Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 2 +- drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 1167205057b3..2ba7937d2545 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -716,7 +716,7 @@ int phm_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type, *voltage = 1150; } else { ret = atomctrl_get_voltage_evv_on_sclk_ai(hwmgr, voltage_type, sclk, id, &vol); - *voltage = (uint16_t)vol/100; + *voltage = (uint16_t)(vol/100); } return ret; } diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c index 1126bd4f74dc..0894527d932f 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c @@ -1320,7 +1320,8 @@ int atomctrl_get_voltage_evv_on_sclk_ai(struct pp_hwmgr *hwmgr, uint8_t voltage_ if (0 != result) return result; - *voltage = le32_to_cpu(((GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_3 *)(&get_voltage_info_param_space))->ulVoltageLevel); + *voltage = le32_to_cpu(((GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_3 *) + (&get_voltage_info_param_space))->ulVoltageLevel); return result; } -- cgit From 796f4687bd622b0f8076b6695001ab5cdc2b722a Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 27 Oct 2016 20:14:45 +0200 Subject: kvm/x86: Show WRMSR data is in hex MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add the "0x" prefix to the error messages format to make it unambiguous about what kind of value we're talking about. Signed-off-by: Borislav Petkov Cc: Paolo Bonzini Cc: "Radim Krčmář" Message-Id: <20161027181445.25319-1-bp@alien8.de> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index e375235d81c9..0b2087981c06 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2262,7 +2262,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) /* Drop writes to this legacy MSR -- see rdmsr * counterpart for further detail. */ - vcpu_unimpl(vcpu, "ignored wrmsr: 0x%x data %llx\n", msr, data); + vcpu_unimpl(vcpu, "ignored wrmsr: 0x%x data 0x%llx\n", msr, data); break; case MSR_AMD64_OSVW_ID_LENGTH: if (!guest_cpuid_has_osvw(vcpu)) @@ -2280,11 +2280,11 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) if (kvm_pmu_is_valid_msr(vcpu, msr)) return kvm_pmu_set_msr(vcpu, msr_info); if (!ignore_msrs) { - vcpu_unimpl(vcpu, "unhandled wrmsr: 0x%x data %llx\n", + vcpu_unimpl(vcpu, "unhandled wrmsr: 0x%x data 0x%llx\n", msr, data); return 1; } else { - vcpu_unimpl(vcpu, "ignored wrmsr: 0x%x data %llx\n", + vcpu_unimpl(vcpu, "ignored wrmsr: 0x%x data 0x%llx\n", msr, data); break; } -- cgit From e2796541ef1d82c73334bfde89b97c9174c8d057 Mon Sep 17 00:00:00 2001 From: Cyrille Pitchen Date: Wed, 19 Oct 2016 17:34:49 +0200 Subject: MAINTAINERS: add a maintainer for the SPI NOR subsystem I would like to volunteer as a maintainer for the SPI NOR part of the MTD subsystem. Over the last months, a significant number of SPI NOR related patches have been submitted, some of them have been reviewed, but very few have finally been merged. Hence, the number of pending SPI NOR related patches continues to increase over the time. Through my work on SPI NOR memories from many manufacturers over the last two years, I've gained a solid understanding of this technology. I've already helped by reviewing patches from other contributors on the mailing list, and would like to help getting those patches integrated by volunteering as a maintainer for this specific area. Boris Brezillon has already stepped up as a maintainer for the NAND sub-subsystem in MTD, and the SPI NOR sub-subsystem could be handled in the same way: I would be reviewing patches touching this area, collecting them and sending pull requests to Brian Norris. Also Marek Vasut has volunteered as well as maintainer for the SPI NOR subsystem. Signed-off-by: Cyrille Pitchen Acked-by: Boris Brezillon Acked-by: Marek Vasut Acked-by: Jagan Teki Signed-off-by: Brian Norris --- MAINTAINERS | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 1cd38a7e0064..2e87047515f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11392,6 +11392,17 @@ W: http://www.st.com/spear S: Maintained F: drivers/clk/spear/ +SPI NOR SUBSYSTEM +M: Cyrille Pitchen +M: Marek Vasut +L: linux-mtd@lists.infradead.org +W: http://www.linux-mtd.infradead.org/ +Q: http://patchwork.ozlabs.org/project/linux-mtd/list/ +T: git git://github.com/spi-nor/linux.git +S: Maintained +F: drivers/mtd/spi-nor/ +F: include/linux/mtd/spi-nor.h + SPI SUBSYSTEM M: Mark Brown L: linux-spi@vger.kernel.org -- cgit From 30656167bd2347bf867a09cbae2705bd927d3983 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Mon, 24 Oct 2016 14:35:26 +0200 Subject: MAINTAINERS: add more people to the MTD maintainer team Brian has been maintaining the MTD subsystem alone for several years now, and maintaining such a subsystem can really be time consuming. Create a maintainer team formed of the most active MTD contributors to help Brian with this task, which will hopefully improve the subsystem reactivity. Signed-off-by: Boris Brezillon Acked-by: Cyrille Pitchen Acked-by: Marek Vasut Acked-by: Richard Weinberger Signed-off-by: Brian Norris --- MAINTAINERS | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 2e87047515f8..11a1c065ea91 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7912,6 +7912,10 @@ F: mm/ MEMORY TECHNOLOGY DEVICES (MTD) M: David Woodhouse M: Brian Norris +M: Boris Brezillon +M: Marek Vasut +M: Richard Weinberger +M: Cyrille Pitchen L: linux-mtd@lists.infradead.org W: http://www.linux-mtd.infradead.org/ Q: http://patchwork.ozlabs.org/project/linux-mtd/list/ -- cgit From 5c4a9129b81027eca12aeaf2fa9defb45150f533 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 26 Oct 2016 08:12:20 +0200 Subject: clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUT The Exynos PMU node is an interrupt, clock and PMU (Power Management Unit) controller, and these functionalities are supported by different drivers that matches the same compatible strings. Since commit 989eafd0b609 ("clk: core: Avoid double initialization of clocks") the OF core flags clock controllers registered with the CLK_OF_DECLARE() macro as OF_POPULATED, so platform devices with the same compatible string will not be registered. This prevents the PMU platform device to be created, so the Exynos PMU driver is never probed. This breaks (among other things) Suspend-to-RAM. Fix this by changing CLKOUT driver initialization method to CLK_OF_DECLARE_DRIVER(), which doesn't clear the OF_POPULATED flag, so later a platform device is created and the Exynos PMU platform driver can be be probed properly. Fixes: 989eafd0b609 ("clk: core: Avoid double initialization of clocks") Signed-off-by: Marek Szyprowski Reviewed-by: Javier Martinez Canillas Reviewed-by: Chanwoo Choi Signed-off-by: Stephen Boyd --- drivers/clk/samsung/clk-exynos-clkout.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos-clkout.c b/drivers/clk/samsung/clk-exynos-clkout.c index 96fab6cfb202..6c6afb87b4ce 100644 --- a/drivers/clk/samsung/clk-exynos-clkout.c +++ b/drivers/clk/samsung/clk-exynos-clkout.c @@ -132,28 +132,34 @@ free_clkout: pr_err("%s: failed to register clkout clock\n", __func__); } +/* + * We use CLK_OF_DECLARE_DRIVER initialization method to avoid setting + * the OF_POPULATED flag on the pmu device tree node, so later the + * Exynos PMU platform device can be properly probed with PMU driver. + */ + static void __init exynos4_clkout_init(struct device_node *node) { exynos_clkout_init(node, EXYNOS4_CLKOUT_MUX_MASK); } -CLK_OF_DECLARE(exynos4210_clkout, "samsung,exynos4210-pmu", +CLK_OF_DECLARE_DRIVER(exynos4210_clkout, "samsung,exynos4210-pmu", exynos4_clkout_init); -CLK_OF_DECLARE(exynos4212_clkout, "samsung,exynos4212-pmu", +CLK_OF_DECLARE_DRIVER(exynos4212_clkout, "samsung,exynos4212-pmu", exynos4_clkout_init); -CLK_OF_DECLARE(exynos4412_clkout, "samsung,exynos4412-pmu", +CLK_OF_DECLARE_DRIVER(exynos4412_clkout, "samsung,exynos4412-pmu", exynos4_clkout_init); -CLK_OF_DECLARE(exynos3250_clkout, "samsung,exynos3250-pmu", +CLK_OF_DECLARE_DRIVER(exynos3250_clkout, "samsung,exynos3250-pmu", exynos4_clkout_init); static void __init exynos5_clkout_init(struct device_node *node) { exynos_clkout_init(node, EXYNOS5_CLKOUT_MUX_MASK); } -CLK_OF_DECLARE(exynos5250_clkout, "samsung,exynos5250-pmu", +CLK_OF_DECLARE_DRIVER(exynos5250_clkout, "samsung,exynos5250-pmu", exynos5_clkout_init); -CLK_OF_DECLARE(exynos5410_clkout, "samsung,exynos5410-pmu", +CLK_OF_DECLARE_DRIVER(exynos5410_clkout, "samsung,exynos5410-pmu", exynos5_clkout_init); -CLK_OF_DECLARE(exynos5420_clkout, "samsung,exynos5420-pmu", +CLK_OF_DECLARE_DRIVER(exynos5420_clkout, "samsung,exynos5420-pmu", exynos5_clkout_init); -CLK_OF_DECLARE(exynos5433_clkout, "samsung,exynos5433-pmu", +CLK_OF_DECLARE_DRIVER(exynos5433_clkout, "samsung,exynos5433-pmu", exynos5_clkout_init); -- cgit From ce93bedb5ed2b16c08c6df4c797865f9ead600a3 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 22 Oct 2016 14:15:22 -0200 Subject: mtd: nand: gpmi: disable the clocks on errors We should disable the previously enabled GPMI clocks in the error paths. Also, when gpmi_enable_clk() fails simply return the error code immediately rather than jumping to to the 'err_out' label. Signed-off-by: Fabio Estevam Reviewed-by: Marek Vasut Acked-by: Han Xu Signed-off-by: Boris Brezillon --- drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 0f68a99fc4ad..141bd70a49c2 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -161,7 +161,7 @@ int gpmi_init(struct gpmi_nand_data *this) ret = gpmi_enable_clk(this); if (ret) - goto err_out; + return ret; ret = gpmi_reset_block(r->gpmi_regs, false); if (ret) goto err_out; @@ -197,6 +197,7 @@ int gpmi_init(struct gpmi_nand_data *this) gpmi_disable_clk(this); return 0; err_out: + gpmi_disable_clk(this); return ret; } @@ -270,7 +271,7 @@ int bch_set_geometry(struct gpmi_nand_data *this) ret = gpmi_enable_clk(this); if (ret) - goto err_out; + return ret; /* * Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this @@ -308,6 +309,7 @@ int bch_set_geometry(struct gpmi_nand_data *this) gpmi_disable_clk(this); return 0; err_out: + gpmi_disable_clk(this); return ret; } -- cgit From 73f907fd5fa56b0066d199bdd7126bbd04f6cd7b Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Mon, 24 Oct 2016 16:46:20 +0200 Subject: mtd: nand: Fix data interface configuration logic When changing from one data interface setting to another, one has to ensure a specific sequence which is described in the ONFI spec. One of these constraints is that the CE line has go high after a reset before a command can be sent with the new data interface setting, which is not guaranteed by the current implementation. Rework the nand_reset() function and all the call sites to make sure the CE line is asserted and released when required. Also make sure to actually apply the new data interface setting on the first die. Signed-off-by: Boris Brezillon Fixes: d8e725dd8311 ("mtd: nand: automate NAND timings selection") Reviewed-by: Sascha Hauer Tested-by: Marc Gonzalez --- drivers/mtd/nand/nand_base.c | 60 +++++++++++++++++++++++++++++++------------- include/linux/mtd/nand.h | 2 +- 2 files changed, 43 insertions(+), 19 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index e5718e5ecf92..3bde96a3f7bf 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1095,10 +1095,11 @@ static void nand_release_data_interface(struct nand_chip *chip) /** * nand_reset - Reset and initialize a NAND device * @chip: The NAND chip + * @chipnr: Internal die id * * Returns 0 for success or negative error code otherwise */ -int nand_reset(struct nand_chip *chip) +int nand_reset(struct nand_chip *chip, int chipnr) { struct mtd_info *mtd = nand_to_mtd(chip); int ret; @@ -1107,9 +1108,17 @@ int nand_reset(struct nand_chip *chip) if (ret) return ret; + /* + * The CS line has to be released before we can apply the new NAND + * interface settings, hence this weird ->select_chip() dance. + */ + chip->select_chip(mtd, chipnr); chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + chip->select_chip(mtd, -1); + chip->select_chip(mtd, chipnr); ret = nand_setup_data_interface(chip); + chip->select_chip(mtd, -1); if (ret) return ret; @@ -1185,8 +1194,6 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) /* Shift to get chip number */ chipnr = ofs >> chip->chip_shift; - chip->select_chip(mtd, chipnr); - /* * Reset the chip. * If we want to check the WP through READ STATUS and check the bit 7 @@ -1194,7 +1201,9 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) * some operation can also clear the bit 7 of status register * eg. erase/program a locked block */ - nand_reset(chip); + nand_reset(chip, chipnr); + + chip->select_chip(mtd, chipnr); /* Check, if it is write protected */ if (nand_check_wp(mtd)) { @@ -1244,8 +1253,6 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) /* Shift to get chip number */ chipnr = ofs >> chip->chip_shift; - chip->select_chip(mtd, chipnr); - /* * Reset the chip. * If we want to check the WP through READ STATUS and check the bit 7 @@ -1253,7 +1260,9 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) * some operation can also clear the bit 7 of status register * eg. erase/program a locked block */ - nand_reset(chip); + nand_reset(chip, chipnr); + + chip->select_chip(mtd, chipnr); /* Check, if it is write protected */ if (nand_check_wp(mtd)) { @@ -2940,10 +2949,6 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, } chipnr = (int)(to >> chip->chip_shift); - chip->select_chip(mtd, chipnr); - - /* Shift to get page */ - page = (int)(to >> chip->page_shift); /* * Reset the chip. Some chips (like the Toshiba TC5832DC found in one @@ -2951,7 +2956,12 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, * if we don't do this. I have no clue why, but I seem to have 'fixed' * it in the doc2000 driver in August 1999. dwmw2. */ - nand_reset(chip); + nand_reset(chip, chipnr); + + chip->select_chip(mtd, chipnr); + + /* Shift to get page */ + page = (int)(to >> chip->page_shift); /* Check, if it is write protected */ if (nand_check_wp(mtd)) { @@ -3984,14 +3994,14 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, int i, maf_idx; u8 id_data[8]; - /* Select the device */ - chip->select_chip(mtd, 0); - /* * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx) * after power-up. */ - nand_reset(chip); + nand_reset(chip, 0); + + /* Select the device */ + chip->select_chip(mtd, 0); /* Send the command for reading device ID */ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); @@ -4329,17 +4339,31 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, return PTR_ERR(type); } + /* Initialize the ->data_interface field. */ ret = nand_init_data_interface(chip); if (ret) return ret; + /* + * Setup the data interface correctly on the chip and controller side. + * This explicit call to nand_setup_data_interface() is only required + * for the first die, because nand_reset() has been called before + * ->data_interface and ->default_onfi_timing_mode were set. + * For the other dies, nand_reset() will automatically switch to the + * best mode for us. + */ + ret = nand_setup_data_interface(chip); + if (ret) + return ret; + chip->select_chip(mtd, -1); /* Check for a chip array */ for (i = 1; i < maxchips; i++) { - chip->select_chip(mtd, i); /* See comment in nand_get_flash_type for reset */ - nand_reset(chip); + nand_reset(chip, i); + + chip->select_chip(mtd, i); /* Send the command for reading device ID */ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); /* Read manufacturer and device IDs */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index c5d3d5024fc8..d8905a229f34 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -1184,7 +1184,7 @@ int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, int page); /* Reset and initialize a NAND device */ -int nand_reset(struct nand_chip *chip); +int nand_reset(struct nand_chip *chip, int chipnr); /* Free resources held by the NAND device */ void nand_cleanup(struct nand_chip *chip); -- cgit From 237d6e6884136923b6bd26d5141ebe1d065960c9 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Tue, 25 Oct 2016 16:24:28 +0200 Subject: s390/hypfs: Use get_free_page() instead of kmalloc to ensure page alignment Since commit d86bd1bece6f ("mm/slub: support left redzone") it is no longer guaranteed that kmalloc(PAGE_SIZE) returns page aligned memory. After the above commit we get an error for diag224 because aligned memory is required. This leads to the following user visible error: # mount none -t s390_hypfs /sys/hypervisor/ mount: unknown filesystem type 's390_hypfs' # dmesg | grep hypfs hypfs.cccfb8: The hardware system does not provide all functions required by hypfs hypfs.7a79f0: Initialization of hypfs failed with rc=-61 Fix this problem and use get_free_page() instead of kmalloc() to get correctly aligned memory. Cc: stable@vger.kernel.org # v3.6+ Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/hypfs/hypfs_diag.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c index 28f03ca60100..794bebb43d23 100644 --- a/arch/s390/hypfs/hypfs_diag.c +++ b/arch/s390/hypfs/hypfs_diag.c @@ -363,11 +363,11 @@ out: static int diag224_get_name_table(void) { /* memory must be below 2GB */ - diag224_cpu_names = kmalloc(PAGE_SIZE, GFP_KERNEL | GFP_DMA); + diag224_cpu_names = (char *) __get_free_page(GFP_KERNEL | GFP_DMA); if (!diag224_cpu_names) return -ENOMEM; if (diag224(diag224_cpu_names)) { - kfree(diag224_cpu_names); + free_page((unsigned long) diag224_cpu_names); return -EOPNOTSUPP; } EBCASC(diag224_cpu_names + 16, (*diag224_cpu_names + 1) * 16); @@ -376,7 +376,7 @@ static int diag224_get_name_table(void) static void diag224_delete_name_table(void) { - kfree(diag224_cpu_names); + free_page((unsigned long) diag224_cpu_names); } static int diag224_idx2name(int index, char *name) -- cgit From 8ff0513bdcdd71e84aa561cce216675d43fb41b8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 18 Oct 2016 00:05:31 +0200 Subject: mtd: mtk: avoid warning in mtk_ecc_encode When building with -Wmaybe-uninitialized, gcc produces a silly false positive warning for the mtk_ecc_encode function: drivers/mtd/nand/mtk_ecc.c: In function 'mtk_ecc_encode': drivers/mtd/nand/mtk_ecc.c:402:15: error: 'val' may be used uninitialized in this function [-Werror=maybe-uninitialized] The function for some reason contains a double byte swap on big-endian builds to get the OOB data into the correct order again, and is written in a slightly confusing way. Using a simple memcpy32_fromio() to read the data simplifies it a lot so it becomes more readable and produces no warning. However, the output might not have 32-bit alignment, so we have to use another memcpy to avoid taking alignment faults or writing beyond the end of the array. Signed-off-by: Arnd Bergmann Tested-by: RogerCC Lin Signed-off-by: Boris Brezillon --- drivers/mtd/nand/mtk_ecc.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/nand/mtk_ecc.c b/drivers/mtd/nand/mtk_ecc.c index d54f666417e1..dbf256217b3e 100644 --- a/drivers/mtd/nand/mtk_ecc.c +++ b/drivers/mtd/nand/mtk_ecc.c @@ -86,6 +86,8 @@ struct mtk_ecc { struct completion done; struct mutex lock; u32 sectors; + + u8 eccdata[112]; }; static inline void mtk_ecc_wait_idle(struct mtk_ecc *ecc, @@ -366,9 +368,8 @@ int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config, u8 *data, u32 bytes) { dma_addr_t addr; - u8 *p; - u32 len, i, val; - int ret = 0; + u32 len; + int ret; addr = dma_map_single(ecc->dev, data, bytes, DMA_TO_DEVICE); ret = dma_mapping_error(ecc->dev, addr); @@ -393,14 +394,12 @@ int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config, /* Program ECC bytes to OOB: per sector oob = FDM + ECC + SPARE */ len = (config->strength * ECC_PARITY_BITS + 7) >> 3; - p = data + bytes; - /* write the parity bytes generated by the ECC back to the OOB region */ - for (i = 0; i < len; i++) { - if ((i % 4) == 0) - val = readl(ecc->regs + ECC_ENCPAR(i / 4)); - p[i] = (val >> ((i % 4) * 8)) & 0xff; - } + /* write the parity bytes generated by the ECC back to temp buffer */ + __ioread32_copy(ecc->eccdata, ecc->regs + ECC_ENCPAR(0), round_up(len, 4)); + + /* copy into possibly unaligned OOB region with actual length */ + memcpy(data + bytes, ecc->eccdata, len); timeout: dma_unmap_single(ecc->dev, addr, bytes, DMA_TO_DEVICE); -- cgit From bd768e146624cbec7122ed15dead8daa137d909d Mon Sep 17 00:00:00 2001 From: Ido Yariv Date: Fri, 21 Oct 2016 12:39:57 -0400 Subject: KVM: x86: fix wbinvd_dirty_mask use-after-free MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit vcpu->arch.wbinvd_dirty_mask may still be used after freeing it, corrupting memory. For example, the following call trace may set a bit in an already freed cpu mask: kvm_arch_vcpu_load vcpu_load vmx_free_vcpu_nested vmx_free_vcpu kvm_arch_vcpu_free Fix this by deferring freeing of wbinvd_dirty_mask. Cc: stable@vger.kernel.org Signed-off-by: Ido Yariv Reviewed-by: Paolo Bonzini Signed-off-by: Radim Krčmář --- arch/x86/kvm/x86.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 0b2087981c06..e954be8a3185 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -7410,10 +7410,12 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu) void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) { + void *wbinvd_dirty_mask = vcpu->arch.wbinvd_dirty_mask; + kvmclock_reset(vcpu); - free_cpumask_var(vcpu->arch.wbinvd_dirty_mask); kvm_x86_ops->vcpu_free(vcpu); + free_cpumask_var(wbinvd_dirty_mask); } struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, -- cgit From 5747620257812530adda58cbff591fede6fb261e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 24 Oct 2016 17:34:32 +0200 Subject: netfilter: ip_vs_sync: fix bogus maybe-uninitialized warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Building the ip_vs_sync code with CONFIG_OPTIMIZE_INLINING on x86 confuses the compiler to the point where it produces a rather dubious warning message: net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘opt.init_seq’ may be used uninitialized in this function [-Werror=maybe-uninitialized] struct ip_vs_sync_conn_options opt; ^~~ net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘opt.delta’ may be used uninitialized in this function [-Werror=maybe-uninitialized] net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘opt.previous_delta’ may be used uninitialized in this function [-Werror=maybe-uninitialized] net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘*((void *)&opt+12).init_seq’ may be used uninitialized in this function [-Werror=maybe-uninitialized] net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘*((void *)&opt+12).delta’ may be used uninitialized in this function [-Werror=maybe-uninitialized] net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘*((void *)&opt+12).previous_delta’ may be used uninitialized in this function [-Werror=maybe-uninitialized] The problem appears to be a combination of a number of factors, including the __builtin_bswap32 compiler builtin being slightly odd, having a large amount of code inlined into a single function, and the way that some functions only get partially inlined here. I've spent way too much time trying to work out a way to improve the code, but the best I've come up with is to add an explicit memset right before the ip_vs_seq structure is first initialized here. When the compiler works correctly, this has absolutely no effect, but in the case that produces the warning, the warning disappears. In the process of analysing this warning, I also noticed that we use memcpy to copy the larger ip_vs_sync_conn_options structure over two members of the ip_vs_conn structure. This works because the layout is identical, but seems error-prone, so I'm changing this in the process to directly copy the two members. This change seemed to have no effect on the object code or the warning, but it deals with the same data, so I kept the two changes together. Signed-off-by: Arnd Bergmann Acked-by: Julian Anastasov Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_sync.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c index 1b07578bedf3..9350530c16c1 100644 --- a/net/netfilter/ipvs/ip_vs_sync.c +++ b/net/netfilter/ipvs/ip_vs_sync.c @@ -283,6 +283,7 @@ struct ip_vs_sync_buff { */ static void ntoh_seq(struct ip_vs_seq *no, struct ip_vs_seq *ho) { + memset(ho, 0, sizeof(*ho)); ho->init_seq = get_unaligned_be32(&no->init_seq); ho->delta = get_unaligned_be32(&no->delta); ho->previous_delta = get_unaligned_be32(&no->previous_delta); @@ -917,8 +918,10 @@ static void ip_vs_proc_conn(struct netns_ipvs *ipvs, struct ip_vs_conn_param *pa kfree(param->pe_data); } - if (opt) - memcpy(&cp->in_seq, opt, sizeof(*opt)); + if (opt) { + cp->in_seq = opt->in_seq; + cp->out_seq = opt->out_seq; + } atomic_set(&cp->in_pkts, sysctl_sync_threshold(ipvs)); cp->state = state; cp->old_state = cp->state; -- cgit From 9cccc76bb49ffcc0370a37a6c01368d69cc3b65b Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 15 Sep 2016 16:28:54 +0300 Subject: drm/i915: keep declarations in i915_drv.h Fix sparse warnings: drivers/gpu/drm/i915/i915_drv.c:1179:5: warning: symbol 'i915_driver_load' was not declared. Should it be static? drivers/gpu/drm/i915/i915_drv.c:1267:6: warning: symbol 'i915_driver_unload' was not declared. Should it be static? drivers/gpu/drm/i915/i915_drv.c:2444:25: warning: symbol 'i915_pm_ops' was not declared. Should it be static? Fixes: 42f5551d2769 ("drm/i915: Split out the PCI driver interface to i915_pci.c") Cc: Chris Wilson Cc: Joonas Lahtinen Reviewed-by: Daniel Vetter Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1473946137-1931-3-git-send-email-jani.nikula@intel.com (cherry picked from commit efab0698f94dd71fac5d946ad664a280441daedb) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.h | 5 +++++ drivers/gpu/drm/i915/i915_pci.c | 7 ------- 2 files changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 8b9ee4e390c0..685e9e065287 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2883,6 +2883,11 @@ __i915_printk(struct drm_i915_private *dev_priv, const char *level, extern long i915_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); #endif +extern const struct dev_pm_ops i915_pm_ops; + +extern int i915_driver_load(struct pci_dev *pdev, + const struct pci_device_id *ent); +extern void i915_driver_unload(struct drm_device *dev); extern int intel_gpu_reset(struct drm_i915_private *dev_priv, u32 engine_mask); extern bool intel_has_gpu_reset(struct drm_i915_private *dev_priv); extern void i915_reset(struct drm_i915_private *dev_priv); diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c index 687c768833b3..31e6edd08dd0 100644 --- a/drivers/gpu/drm/i915/i915_pci.c +++ b/drivers/gpu/drm/i915/i915_pci.c @@ -431,9 +431,6 @@ static const struct pci_device_id pciidlist[] = { }; MODULE_DEVICE_TABLE(pci, pciidlist); -extern int i915_driver_load(struct pci_dev *pdev, - const struct pci_device_id *ent); - static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct intel_device_info *intel_info = @@ -463,8 +460,6 @@ static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return i915_driver_load(pdev, ent); } -extern void i915_driver_unload(struct drm_device *dev); - static void i915_pci_remove(struct pci_dev *pdev) { struct drm_device *dev = pci_get_drvdata(pdev); @@ -473,8 +468,6 @@ static void i915_pci_remove(struct pci_dev *pdev) drm_dev_unref(dev); } -extern const struct dev_pm_ops i915_pm_ops; - static struct pci_driver i915_pci_driver = { .name = DRIVER_NAME, .id_table = pciidlist, -- cgit From 7a0e17bd5d5a20784431df24601bfafec9d8ec61 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 4 Oct 2016 12:54:12 +0300 Subject: drm/i915: workaround sparse warning on variable length arrays Fix sparse warning: drivers/gpu/drm/i915/intel_device_info.c:195:31: warning: Variable length array is used. In truth the array does have constant length, but sparse is too dumb to realize. This is a bit ugly, but silence the warning no matter what. Fixes: 91bedd34abf0 ("drm/i915/bdw: Check for slice, subslice and EU count for BDW") Reviewed-by: Joonas Lahtinen Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1475574853-4178-1-git-send-email-jani.nikula@intel.com (cherry picked from commit ff64aa1e630087381511c4d25de0657824f40efa) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_device_info.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_device_info.c b/drivers/gpu/drm/i915/intel_device_info.c index 73b6858600ac..1b20e160bc1f 100644 --- a/drivers/gpu/drm/i915/intel_device_info.c +++ b/drivers/gpu/drm/i915/intel_device_info.c @@ -192,7 +192,7 @@ static void broadwell_sseu_info_init(struct drm_i915_private *dev_priv) struct sseu_dev_info *sseu = &mkwrite_device_info(dev_priv)->sseu; const int s_max = 3, ss_max = 3, eu_max = 8; int s, ss; - u32 fuse2, eu_disable[s_max]; + u32 fuse2, eu_disable[3]; /* s_max */ fuse2 = I915_READ(GEN8_FUSE2); sseu->slice_mask = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT; -- cgit From 01c72d6c17dc524f04d4dbe361d214e423b35457 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 4 Oct 2016 14:37:32 -0300 Subject: drm/i915/gen9: fix DDB partitioning for multi-screen cases With the previous code we were only recomputing the DDB partitioning for the CRTCs included in the atomic commit, so any other active CRTCs would end up having their DDB registers zeroed. In this patch we make sure that the computed state starts as a copy of the current partitioning, and then we only zero the DDBs that we're actually going to recompute. How to reproduce the bug: 1 - Enable the primary plane on pipe A 2 - Enable the primary plane on pipe B 3 - Enable the cursor or sprite plane on pipe A Step 3 will zero the DDB partitioning for pipe B since it's not included in the commit that enabled the cursor or sprite for pipe A. I expect this to fix many FIFO underrun problems on gen9+. v2: - Mention the cursor on the steps to reproduce the problem (Paulo). - Add Testcase tag provided by Maarten (Maarten). Testcase: kms_cursor_legacy.cursorA-vs-flipB-atomic-transitions Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97596 Bugzilla: https://www.phoronix.com/scan.php?page=news_item&px=Intel-Skylake-Multi-Screen-Woes Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni Reviewed-by: Lyude Link: http://patchwork.freedesktop.org/patch/msgid/1475602652-17326-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit 5a920b85f2c6e3fd7d9dd9bb3f3345e9085e2360) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index a2f751cd187a..1a11ab87ec5d 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3362,13 +3362,15 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate, int num_active; int id, i; + /* Clear the partitioning for disabled planes. */ + memset(ddb->plane[pipe], 0, sizeof(ddb->plane[pipe])); + memset(ddb->y_plane[pipe], 0, sizeof(ddb->y_plane[pipe])); + if (WARN_ON(!state)) return 0; if (!cstate->base.active) { ddb->pipe[pipe].start = ddb->pipe[pipe].end = 0; - memset(ddb->plane[pipe], 0, sizeof(ddb->plane[pipe])); - memset(ddb->y_plane[pipe], 0, sizeof(ddb->y_plane[pipe])); return 0; } @@ -4050,6 +4052,12 @@ skl_compute_ddb(struct drm_atomic_state *state) intel_state->wm_results.dirty_pipes = ~0; } + /* + * We're not recomputing for the pipes not included in the commit, so + * make sure we start with the current state. + */ + memcpy(ddb, &dev_priv->wm.skl_hw.ddb, sizeof(*ddb)); + for_each_intel_crtc_mask(dev, intel_crtc, realloc_pipes) { struct intel_crtc_state *cstate; -- cgit From 47ed32483e1f1fc391c78466f5fd66f03078e9e4 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 12 Oct 2016 12:48:26 +0100 Subject: drm/i915: Use fence_write() from rpm resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During rpm resume we restore the fences, but we do not have the protection of struct_mutex. This rules out updating the activity tracking on the fences, and requires us to rely on the rpm as the serialisation barrier instead. [ 350.298052] [drm:intel_runtime_resume [i915]] Resuming device [ 350.308606] [ 350.310520] =============================== [ 350.315560] [ INFO: suspicious RCU usage. ] [ 350.320554] 4.8.0-rc8-bsw-rapl+ #3133 Tainted: G U W [ 350.327208] ------------------------------- [ 350.331977] ../drivers/gpu/drm/i915/i915_gem_request.h:371 suspicious rcu_dereference_protected() usage! [ 350.342619] [ 350.342619] other info that might help us debug this: [ 350.342619] [ 350.351593] [ 350.351593] rcu_scheduler_active = 1, debug_locks = 0 [ 350.358952] 3 locks held by Xorg/320: [ 350.363077] #0: (&dev->mode_config.mutex){+.+.+.}, at: [] drm_modeset_lock_all+0x3c/0xd0 [drm] [ 350.375162] #1: (crtc_ww_class_acquire){+.+.+.}, at: [] drm_modeset_lock_all+0x46/0xd0 [drm] [ 350.387022] #2: (crtc_ww_class_mutex){+.+.+.}, at: [] drm_modeset_lock+0x36/0x110 [drm] [ 350.398236] [ 350.398236] stack backtrace: [ 350.403196] CPU: 1 PID: 320 Comm: Xorg Tainted: G U W 4.8.0-rc8-bsw-rapl+ #3133 [ 350.412457] Hardware name: Intel Corporation CHERRYVIEW C0 PLATFORM/Braswell CRB, BIOS BRAS.X64.X088.R00.1510270350 10/27/2015 [ 350.425212] 0000000000000000 ffff8801680a78c8 ffffffff81332187 ffff88016c5c5000 [ 350.433611] 0000000000000001 ffff8801680a78f8 ffffffff810ca6da ffff88016cc8b0f0 [ 350.442012] ffff88016cc80000 ffff88016cc80000 ffff880177ad0000 ffff8801680a7948 [ 350.450409] Call Trace: [ 350.453165] [] dump_stack+0x67/0x90 [ 350.458931] [] lockdep_rcu_suspicious+0xea/0x120 [ 350.466002] [] fence_update+0xbd/0x670 [i915] [ 350.472766] [] i915_gem_restore_fences+0x52/0x70 [i915] [ 350.480496] [] vlv_resume_prepare+0x72/0x570 [i915] [ 350.487839] [] intel_runtime_resume+0x102/0x210 [i915] [ 350.495442] [] pci_pm_runtime_resume+0x7f/0xb0 [ 350.502274] [] ? pci_restore_standard_config+0x40/0x40 [ 350.509883] [] __rpm_callback+0x35/0x70 [ 350.516037] [] ? pci_restore_standard_config+0x40/0x40 [ 350.523646] [] rpm_callback+0x24/0x80 [ 350.529604] [] ? pci_restore_standard_config+0x40/0x40 [ 350.537212] [] rpm_resume+0x4ad/0x740 [ 350.543161] [] __pm_runtime_resume+0x51/0x80 [ 350.549824] [] intel_runtime_pm_get+0x28/0x90 [i915] [ 350.557265] [] intel_display_power_get+0x23/0x50 [i915] [ 350.565001] [] intel_atomic_commit_tail+0xdfd/0x10b0 [i915] [ 350.573106] [] ? drm_atomic_helper_swap_state+0x159/0x300 [drm_kms_helper] [ 350.582659] [] ? _raw_spin_unlock+0x31/0x50 [ 350.589205] [] ? drm_atomic_helper_swap_state+0x159/0x300 [drm_kms_helper] [ 350.598787] [] intel_atomic_commit+0x3b5/0x500 [i915] [ 350.606319] [] ? drm_atomic_set_crtc_for_connector+0xcc/0x100 [drm] [ 350.615209] [] drm_atomic_commit+0x49/0x50 [drm] [ 350.622242] [] drm_atomic_helper_set_config+0x88/0xc0 [drm_kms_helper] [ 350.631419] [] drm_mode_set_config_internal+0x6c/0x120 [drm] [ 350.639623] [] drm_mode_setcrtc+0x22c/0x4d0 [drm] [ 350.646760] [] drm_ioctl+0x209/0x460 [drm] [ 350.653217] [] ? drm_mode_getcrtc+0x150/0x150 [drm] [ 350.660536] [] ? __lock_is_held+0x4a/0x70 [ 350.666885] [] do_vfs_ioctl+0x93/0x6b0 [ 350.672939] [] ? __fget+0x113/0x200 [ 350.678797] [] ? __fget+0x5/0x200 [ 350.684361] [] SyS_ioctl+0x44/0x80 [ 350.690030] [] do_syscall_64+0x5b/0x120 [ 350.696184] [] entry_SYSCALL64_slow_path+0x25/0x25 Note we also have to remember the lesson from commit 4fc788f5ee3d ("drm/i915: Flush delayed fence releases after reset") where we have to flush any changes to the fence on restore. v2: Replace call to release user mmaps with an assertion that they have already been zapped. Fixes: 49ef5294cda2 ("drm/i915: Move fence tracking from object to vma") Reported-by: Ville Syrjälä Signed-off-by: Chris Wilson Cc: Ville Syrjälä Cc: Joonas Lahtinen Cc: Mika Kuoppala Reviewed-by: Joonas Lahtinen Link: http://patchwork.freedesktop.org/patch/msgid/20161012114827.17031-1-chris@chris-wilson.co.uk (cherry picked from commit 4676dc838b37ed8c6f3da4571cb4a04cbd604801) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_fence.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_fence.c b/drivers/gpu/drm/i915/i915_gem_fence.c index 8df1fa7234e8..2c7ba0ee127c 100644 --- a/drivers/gpu/drm/i915/i915_gem_fence.c +++ b/drivers/gpu/drm/i915/i915_gem_fence.c @@ -290,6 +290,8 @@ i915_vma_put_fence(struct i915_vma *vma) { struct drm_i915_fence_reg *fence = vma->fence; + assert_rpm_wakelock_held(to_i915(vma->vm->dev)); + if (!fence) return 0; @@ -341,6 +343,8 @@ i915_vma_get_fence(struct i915_vma *vma) struct drm_i915_fence_reg *fence; struct i915_vma *set = i915_gem_object_is_tiled(vma->obj) ? vma : NULL; + assert_rpm_wakelock_held(to_i915(vma->vm->dev)); + /* Just update our place in the LRU if our fence is getting reused. */ if (vma->fence) { fence = vma->fence; @@ -371,6 +375,12 @@ void i915_gem_restore_fences(struct drm_device *dev) struct drm_i915_private *dev_priv = to_i915(dev); int i; + /* Note that this may be called outside of struct_mutex, by + * runtime suspend/resume. The barrier we require is enforced by + * rpm itself - all access to fences/GTT are only within an rpm + * wakeref, and to acquire that wakeref you must pass through here. + */ + for (i = 0; i < dev_priv->num_fence_regs; i++) { struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i]; struct i915_vma *vma = reg->vma; @@ -379,10 +389,17 @@ void i915_gem_restore_fences(struct drm_device *dev) * Commit delayed tiling changes if we have an object still * attached to the fence, otherwise just clear the fence. */ - if (vma && !i915_gem_object_is_tiled(vma->obj)) + if (vma && !i915_gem_object_is_tiled(vma->obj)) { + GEM_BUG_ON(!reg->dirty); + GEM_BUG_ON(vma->obj->fault_mappable); + + list_move(®->link, &dev_priv->mm.fence_list); + vma->fence = NULL; vma = NULL; + } - fence_update(reg, vma); + fence_write(reg, vma); + reg->vma = vma; } } -- cgit From be4dd651ff79b9fddc46ef330afeedc6560fd1ca Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 13 Oct 2016 11:55:08 +0300 Subject: drm/i915: fix a read size argument We want to read 3 bytes here, but because the parenthesis are in the wrong place we instead read: sizeof(intel_dp->edp_dpcd) == sizeof(intel_dp->edp_dpcd) which is one byte. Fixes: fe5a66f91c88 ("drm/i915: Read PSR caps/intermediate freqs/etc. only once on eDP") Reviewed-by: Chris Wilson Cc: Signed-off-by: Dan Carpenter Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161013085508.GJ16198@mwanda (cherry picked from commit f7170e2eb8f6bf7ef2032cc0659cd38740bf5b97) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 14a3cf0b7213..ee8aa95967de 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -3551,8 +3551,8 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp) /* Read the eDP Display control capabilities registers */ if ((intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) && drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV, - intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd) == - sizeof(intel_dp->edp_dpcd))) + intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd)) == + sizeof(intel_dp->edp_dpcd)) DRM_DEBUG_KMS("EDP DPCD : %*ph\n", (int) sizeof(intel_dp->edp_dpcd), intel_dp->edp_dpcd); -- cgit From fd58753ead86ee289ea89fe26e1842f36e54b36c Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Thu, 13 Oct 2016 14:34:06 +0300 Subject: drm/i915: Fix mismatched INIT power domain disabling during suspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently the display INIT power domain disabling/enabling happens in a mismatched way in the suspend/resume_early hooks respectively. This can leave display power wells incorrectly disabled in the resume hook if the suspend sequence is aborted for some reason resulting in the suspend/resume hooks getting called but the suspend_late/resume_early hooks being skipped. In particular this change fixes "Unclaimed read from register 0x1e1204" on BYT/BSW triggered from i915_drm_resume()-> intel_pps_unlock_regs_wa() when suspending with /sys/power/pm_test set to devices. Fixes: 85e90679335f ("drm/i915: disable power wells on suspend") Cc: Ville Syrjälä Cc: David Weinehall Signed-off-by: Imre Deak Reviewed-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1476358446-11621-1-git-send-email-imre.deak@intel.com (cherry picked from commit 4c494a5769cd0de92638b25960ba0158c36088a6) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index bfb2efd8d4d4..18dfdd5c1b3b 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -1447,8 +1447,6 @@ static int i915_drm_suspend(struct drm_device *dev) dev_priv->suspend_count++; - intel_display_set_init_power(dev_priv, false); - intel_csr_ucode_suspend(dev_priv); out: @@ -1466,6 +1464,8 @@ static int i915_drm_suspend_late(struct drm_device *dev, bool hibernation) disable_rpm_wakeref_asserts(dev_priv); + intel_display_set_init_power(dev_priv, false); + fw_csr = !IS_BROXTON(dev_priv) && suspend_to_idle(dev_priv) && dev_priv->csr.dmc_payload; /* -- cgit From 5e33791e1f27c3207e7b44071e7c94a487d1eb39 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 7 Oct 2016 17:28:57 -0300 Subject: drm/i915/gen9: fix watermarks when using the pipe scaler Luckily, the necessary adjustments for when we're using the scaler are exactly the same as the ones needed on ILK+, so just reuse the function we already have. v2: Invert the patch order so stable backports get easier. Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni Reviewed-by: Matt Roper Link: http://patchwork.freedesktop.org/patch/msgid/1475872138-16194-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit cfd7e3a20251b9ac95651d64556f87f86128a966) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 1a11ab87ec5d..db24f898853c 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3470,12 +3470,6 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate, return 0; } -static uint32_t skl_pipe_pixel_rate(const struct intel_crtc_state *config) -{ - /* TODO: Take into account the scalers once we support them */ - return config->base.adjusted_mode.crtc_clock; -} - /* * The max latency should be 257 (max the punit can code is 255 and we add 2us * for the read latency) and cpp should always be <= 8, so that @@ -3526,7 +3520,7 @@ static uint32_t skl_adjusted_plane_pixel_rate(const struct intel_crtc_state *cst * Adjusted plane pixel rate is just the pipe's adjusted pixel rate * with additional adjustments for plane-specific scaling. */ - adjusted_pixel_rate = skl_pipe_pixel_rate(cstate); + adjusted_pixel_rate = ilk_pipe_pixel_rate(cstate); downscale_amount = skl_plane_downscale_amount(pstate); pixel_rate = adjusted_pixel_rate * downscale_amount >> 16; @@ -3738,11 +3732,11 @@ skl_compute_linetime_wm(struct intel_crtc_state *cstate) if (!cstate->base.active) return 0; - if (WARN_ON(skl_pipe_pixel_rate(cstate) == 0)) + if (WARN_ON(ilk_pipe_pixel_rate(cstate) == 0)) return 0; return DIV_ROUND_UP(8 * cstate->base.adjusted_mode.crtc_htotal * 1000, - skl_pipe_pixel_rate(cstate)); + ilk_pipe_pixel_rate(cstate)); } static void skl_compute_transition_wm(struct intel_crtc_state *cstate, -- cgit From 198c5ee3c60169f8b64bcd330a34593be80699aa Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 11 Oct 2016 20:52:45 +0300 Subject: drm/i915: Respect alternate_aux_channel for all DDI ports MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The VBT provides the platform a way to mix and match the DDI ports vs. AUX channels. Currently we only trust the VBT for DDI E, which has no corresponding AUX channel of its own. However it is possible that some board might use some non-standard DDI vs. AUX port routing even for the other ports. Perhaps for signal routing reasons or something, So let's generalize this and trust the VBT for all ports. For now we'll limit this to DDI platforms, as we trust the VBT a bit more there anyway when it comes to the DDI ports. I've structured the code in a way that would allow us to easily expand this to other platforms as well, by simply filling in the ddi_port_info. v2: Drop whitespace changes, keep MISSING_CASE() for unknown aux ch assignment, include a commit message, include debug message during init Cc: stable@vger.kernel.org Cc: Maarten Maathuis Tested-by: Maarten Maathuis References: https://bugs.freedesktop.org/show_bug.cgi?id=97877 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jim Bride (cherry picked from commit 8f7ce038f1178057733b7e765bf9160a2f9be14b) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 71 +++++++++++++++++++++++------------------ 1 file changed, 40 insertions(+), 31 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index ee8aa95967de..3581b5a7f716 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1108,6 +1108,44 @@ intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) return ret; } +static enum port intel_aux_port(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + enum port aux_port; + + if (!info->alternate_aux_channel) { + DRM_DEBUG_KMS("using AUX %c for port %c (platform default)\n", + port_name(port), port_name(port)); + return port; + } + + switch (info->alternate_aux_channel) { + case DP_AUX_A: + aux_port = PORT_A; + break; + case DP_AUX_B: + aux_port = PORT_B; + break; + case DP_AUX_C: + aux_port = PORT_C; + break; + case DP_AUX_D: + aux_port = PORT_D; + break; + default: + MISSING_CASE(info->alternate_aux_channel); + aux_port = PORT_A; + break; + } + + DRM_DEBUG_KMS("using AUX %c for port %c (VBT)\n", + port_name(aux_port), port_name(port)); + + return aux_port; +} + static i915_reg_t g4x_aux_ctl_reg(struct drm_i915_private *dev_priv, enum port port) { @@ -1168,36 +1206,9 @@ static i915_reg_t ilk_aux_data_reg(struct drm_i915_private *dev_priv, } } -/* - * On SKL we don't have Aux for port E so we rely - * on VBT to set a proper alternate aux channel. - */ -static enum port skl_porte_aux_port(struct drm_i915_private *dev_priv) -{ - const struct ddi_vbt_port_info *info = - &dev_priv->vbt.ddi_port_info[PORT_E]; - - switch (info->alternate_aux_channel) { - case DP_AUX_A: - return PORT_A; - case DP_AUX_B: - return PORT_B; - case DP_AUX_C: - return PORT_C; - case DP_AUX_D: - return PORT_D; - default: - MISSING_CASE(info->alternate_aux_channel); - return PORT_A; - } -} - static i915_reg_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv, enum port port) { - if (port == PORT_E) - port = skl_porte_aux_port(dev_priv); - switch (port) { case PORT_A: case PORT_B: @@ -1213,9 +1224,6 @@ static i915_reg_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv, static i915_reg_t skl_aux_data_reg(struct drm_i915_private *dev_priv, enum port port, int index) { - if (port == PORT_E) - port = skl_porte_aux_port(dev_priv); - switch (port) { case PORT_A: case PORT_B: @@ -1253,7 +1261,8 @@ static i915_reg_t intel_aux_data_reg(struct drm_i915_private *dev_priv, static void intel_aux_reg_init(struct intel_dp *intel_dp) { struct drm_i915_private *dev_priv = to_i915(intel_dp_to_dev(intel_dp)); - enum port port = dp_to_dig_port(intel_dp)->port; + enum port port = intel_aux_port(dev_priv, + dp_to_dig_port(intel_dp)->port); int i; intel_dp->aux_ch_ctl_reg = intel_aux_ctl_reg(dev_priv, port); -- cgit From 0ce140d45a8398b501934ac289aef0eb7f47c596 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 11 Oct 2016 20:52:47 +0300 Subject: drm/i915: Clean up DDI DDC/AUX CH sanitation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now that we use the AUX and GMBUS assignment from VBT for all ports, let's clean up the sanitization of the port information a bit. Previosuly we only did this for port E, and only complained about a non-standard assignment for the other ports. But as we know that non-standard assignments are a fact of life, let's expand the sanitization to all the ports. v2: Include a commit message, fix up the comments a bit v3: Don't clobber other ports if the current port has no alternate aux ch/ddc pin Cc: stable@vger.kernel.org Cc: Maarten Maathuis Tested-by: Maarten Maathuis References: https://bugs.freedesktop.org/show_bug.cgi?id=97877 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-4-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jim Bride (v2) (cherry picked from commit 9454fa871edf15c20a0371548b3ec0d6d944a498) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_bios.c | 122 ++++++++++++++++++++++++-------------- 1 file changed, 77 insertions(+), 45 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index c6e69e4cfa83..1f8af87c6294 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -1031,6 +1031,77 @@ static u8 translate_iboost(u8 val) return mapping[val]; } +static void sanitize_ddc_pin(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + enum port p; + + if (!info->alternate_ddc_pin) + return; + + for_each_port_masked(p, (1 << port) - 1) { + struct ddi_vbt_port_info *i = &dev_priv->vbt.ddi_port_info[p]; + + if (info->alternate_ddc_pin != i->alternate_ddc_pin) + continue; + + DRM_DEBUG_KMS("port %c trying to use the same DDC pin (0x%x) as port %c, " + "disabling port %c DVI/HDMI support\n", + port_name(p), i->alternate_ddc_pin, + port_name(port), port_name(p)); + + /* + * If we have multiple ports supposedly sharing the + * pin, then dvi/hdmi couldn't exist on the shared + * port. Otherwise they share the same ddc bin and + * system couldn't communicate with them separately. + * + * Due to parsing the ports in alphabetical order, + * a higher port will always clobber a lower one. + */ + i->supports_dvi = false; + i->supports_hdmi = false; + i->alternate_ddc_pin = 0; + } +} + +static void sanitize_aux_ch(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + enum port p; + + if (!info->alternate_aux_channel) + return; + + for_each_port_masked(p, (1 << port) - 1) { + struct ddi_vbt_port_info *i = &dev_priv->vbt.ddi_port_info[p]; + + if (info->alternate_aux_channel != i->alternate_aux_channel) + continue; + + DRM_DEBUG_KMS("port %c trying to use the same AUX CH (0x%x) as port %c, " + "disabling port %c DP support\n", + port_name(p), i->alternate_aux_channel, + port_name(port), port_name(p)); + + /* + * If we have multiple ports supposedlt sharing the + * aux channel, then DP couldn't exist on the shared + * port. Otherwise they share the same aux channel + * and system couldn't communicate with them separately. + * + * Due to parsing the ports in alphabetical order, + * a higher port will always clobber a lower one. + */ + i->supports_dp = false; + i->alternate_aux_channel = 0; + } +} + static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port, const struct bdb_header *bdb) { @@ -1105,54 +1176,15 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port, DRM_DEBUG_KMS("Port %c is internal DP\n", port_name(port)); if (is_dvi) { - if (port == PORT_E) { - info->alternate_ddc_pin = ddc_pin; - /* if DDIE share ddc pin with other port, then - * dvi/hdmi couldn't exist on the shared port. - * Otherwise they share the same ddc bin and system - * couldn't communicate with them seperately. */ - if (ddc_pin == DDC_PIN_B) { - dev_priv->vbt.ddi_port_info[PORT_B].supports_dvi = 0; - dev_priv->vbt.ddi_port_info[PORT_B].supports_hdmi = 0; - } else if (ddc_pin == DDC_PIN_C) { - dev_priv->vbt.ddi_port_info[PORT_C].supports_dvi = 0; - dev_priv->vbt.ddi_port_info[PORT_C].supports_hdmi = 0; - } else if (ddc_pin == DDC_PIN_D) { - dev_priv->vbt.ddi_port_info[PORT_D].supports_dvi = 0; - dev_priv->vbt.ddi_port_info[PORT_D].supports_hdmi = 0; - } - } else if (ddc_pin == DDC_PIN_B && port != PORT_B) - DRM_DEBUG_KMS("Unexpected DDC pin for port B\n"); - else if (ddc_pin == DDC_PIN_C && port != PORT_C) - DRM_DEBUG_KMS("Unexpected DDC pin for port C\n"); - else if (ddc_pin == DDC_PIN_D && port != PORT_D) - DRM_DEBUG_KMS("Unexpected DDC pin for port D\n"); + info->alternate_ddc_pin = ddc_pin; + + sanitize_ddc_pin(dev_priv, port); } if (is_dp) { - if (port == PORT_E) { - info->alternate_aux_channel = aux_channel; - /* if DDIE share aux channel with other port, then - * DP couldn't exist on the shared port. Otherwise - * they share the same aux channel and system - * couldn't communicate with them seperately. */ - if (aux_channel == DP_AUX_A) - dev_priv->vbt.ddi_port_info[PORT_A].supports_dp = 0; - else if (aux_channel == DP_AUX_B) - dev_priv->vbt.ddi_port_info[PORT_B].supports_dp = 0; - else if (aux_channel == DP_AUX_C) - dev_priv->vbt.ddi_port_info[PORT_C].supports_dp = 0; - else if (aux_channel == DP_AUX_D) - dev_priv->vbt.ddi_port_info[PORT_D].supports_dp = 0; - } - else if (aux_channel == DP_AUX_A && port != PORT_A) - DRM_DEBUG_KMS("Unexpected AUX channel for port A\n"); - else if (aux_channel == DP_AUX_B && port != PORT_B) - DRM_DEBUG_KMS("Unexpected AUX channel for port B\n"); - else if (aux_channel == DP_AUX_C && port != PORT_C) - DRM_DEBUG_KMS("Unexpected AUX channel for port C\n"); - else if (aux_channel == DP_AUX_D && port != PORT_D) - DRM_DEBUG_KMS("Unexpected AUX channel for port D\n"); + info->alternate_aux_channel = aux_channel; + + sanitize_aux_ch(dev_priv, port); } if (bdb->version >= 158) { -- cgit From 1fb3672eaf6ec95fb34c22734feffd6041531c5b Mon Sep 17 00:00:00 2001 From: Daniel Stone Date: Fri, 21 Oct 2016 15:44:54 +0100 Subject: drm: i915: Wait for fences on new fb, not old The previous code would wait for fences on the framebuffer from the old plane state to complete, rather than the new, so you would see tearing everywhere. Fix this to wait on the new state before we make it active. Signed-off-by: Daniel Stone Fixes: 94f050246b42 ("drm/i915: nonblocking commit") Cc: stable@vger.kernel.org Cc: Daniel Vetter Cc: Maarten Lankhorst Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161021144454.6288-1-daniels@collabora.com (cherry picked from commit 2d2c5ad83f772d7d7b0bb8348ecea42e88f89ab0) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index fbcfed63a76e..319191e6988c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -14310,7 +14310,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state) for_each_plane_in_state(state, plane, plane_state, i) { struct intel_plane_state *intel_plane_state = - to_intel_plane_state(plane_state); + to_intel_plane_state(plane->state); if (!intel_plane_state->wait_req) continue; -- cgit From e3b9e6e3a989904ae062e7a48a9431edc837ea6b Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 21 Oct 2016 13:55:45 -0200 Subject: drm/i915/fbc: fix CFB size calculation for gen8+ MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Broadwell and newer actually compress up to 2560 lines instead of 2048 (as documented in the FBC_CTL page). If we don't take this into consideration we end up reserving too little stolen memory for the CFB, so we may allocate something else (such as a ring) right after what we reserved, and the hardware will overwrite it with the contents of the CFB when FBC is active, causing GPU hangs. Another possibility is that the CFB may be allocated at the very end of the available space, so the CFB will overlap the reserved stolen area, leading to FIFO underruns. This bug has always been a problem on BDW (the only affected platform where FBC is enabled by default), but it's much easier to reproduce since the following commit: commit c58b735fc762e891481e92af7124b85cb0a51fce Author: Chris Wilson Date: Thu Aug 18 17:16:57 2016 +0100 drm/i915: Allocate rings from stolen Of course, you can only reproduce the bug if your screen is taller than 2048 lines. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98213 Fixes: a98ee79317b4 ("drm/i915/fbc: enable FBC by default on HSW and BDW") Cc: # v4.6+ Signed-off-by: Paulo Zanoni Reviewed-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1477065346-13736-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit 79f2624b1b9f776b173b41d743fb3dd7374b3827) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_fbc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_fbc.c b/drivers/gpu/drm/i915/intel_fbc.c index faa67624e1ed..c43dd9abce79 100644 --- a/drivers/gpu/drm/i915/intel_fbc.c +++ b/drivers/gpu/drm/i915/intel_fbc.c @@ -104,8 +104,10 @@ static int intel_fbc_calculate_cfb_size(struct drm_i915_private *dev_priv, int lines; intel_fbc_get_plane_source_size(cache, NULL, &lines); - if (INTEL_INFO(dev_priv)->gen >= 7) + if (INTEL_GEN(dev_priv) == 7) lines = min(lines, 2048); + else if (INTEL_GEN(dev_priv) >= 8) + lines = min(lines, 2560); /* Hardware needs the full buffer stride, not just the active area. */ return lines * cache->fb.stride; -- cgit From 6d9deb910c8eee8728129326dc88ec109b03b135 Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Tue, 25 Oct 2016 17:40:35 +0100 Subject: drm/i915: Rotated view does not need a fence We do not need to set up a fence for the rotated view. Display does not need it and no one can access it. v2: Move code to __i915_vma_set_map_and_fenceable. (Chris Wilson) Signed-off-by: Tvrtko Ursulin Fixes: 05a20d098db1 ("drm/i915: Move map-and-fenceable tracking to the VMA") Cc: Chris Wilson Cc: Joonas Lahtinen Reviewed-by: Chris Wilson (cherry picked from commit 07ee2bce6a516e0218dba22581803cb8f11bcf82) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 947e82c2b175..e1053c4949f4 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3745,7 +3745,12 @@ void __i915_vma_set_map_and_fenceable(struct i915_vma *vma) mappable = (vma->node.start + fence_size <= dev_priv->ggtt.mappable_end); - if (mappable && fenceable) + /* + * Explicitly disable for rotated VMA since the display does not + * need the fence and the VMA is not accessible to other users. + */ + if (mappable && fenceable && + vma->ggtt_view.type != I915_GGTT_VIEW_ROTATED) vma->flags |= I915_VMA_CAN_FENCE; else vma->flags &= ~I915_VMA_CAN_FENCE; -- cgit From 7e9b3f95d64165f37c6448fe624d835c5adf17b9 Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Tue, 25 Oct 2016 17:41:12 +0100 Subject: drm/i915: Remove two invalid warns MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Objects can have multiple VMAs used for display in which case assertion that objects must not be pinned for display more times than the current VMA is incorrect. v2: Commit message update. (Chris Wilson) Signed-off-by: Tvrtko Ursulin Fixes: 058d88c4330f ("drm/i915: Track pinned VMA") Cc: Chris Wilson Cc: Joonas Lahtinen Cc: Ville Syrjälä Reviewed-by: Chris Wilson Link: http://patchwork.freedesktop.org/patch/msgid/1477413635-3876-1-git-send-email-tvrtko.ursulin@linux.intel.com (cherry picked from commit 3299e7e43484a85eeb5c7ec09958bff05c9d0543) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index e1053c4949f4..23960de81b57 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3550,8 +3550,6 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, vma->display_alignment = max_t(u64, vma->display_alignment, alignment); - WARN_ON(obj->pin_display > i915_vma_pin_count(vma)); - i915_gem_object_flush_cpu_write_domain(obj); old_write_domain = obj->base.write_domain; @@ -3588,7 +3586,6 @@ i915_gem_object_unpin_from_display_plane(struct i915_vma *vma) list_move_tail(&vma->vm_link, &vma->vm->inactive_list); i915_vma_unpin(vma); - WARN_ON(vma->obj->pin_display > i915_vma_pin_count(vma)); } /** -- cgit From c89d5454d48e3b6ecae1c9f8bb14b3fac64d9fc8 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Mon, 24 Oct 2016 19:13:04 +0300 Subject: drm/i915: Fix SKL+ 90/270 degree rotated plane coordinate computation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Pass the framebuffer size in .16 fixed point coordinates to drm_rect_rotate() since that's what the source coordinates are as well at this stage. We used to do this part of the computation in integer coordinates, but that got changed when moving the computation to happen in the check phase of the operation. Unfortunately I forgot to shift up the fb width and height appropriately. With the bogus size we ended up with some negative fb offset, which when added to the vma offset caused out scanout to start at an offset earlier than we inteded. Eg. when testing on my SKL I saw a row of incorrect tiles at the top of my screen. Cc: Tvrtko Ursulin Cc: Sivakumar Thulasimani Cc: drm-intel-fixes@lists.freedesktop.org Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1477325584-23679-1-git-send-email-ville.syrjala@linux.intel.com Tested-by: Tvrtko Ursulin Reviewed-by: Chris Wilson (cherry picked from commit da064b47c0b8d0dff1905b38c76e7e51fb5a9547) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 319191e6988c..0ad1879bfd9d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2978,7 +2978,8 @@ int skl_check_plane_surface(struct intel_plane_state *plane_state) /* Rotate src coordinates to match rotated GTT view */ if (intel_rotation_90_or_270(rotation)) drm_rect_rotate(&plane_state->base.src, - fb->width, fb->height, DRM_ROTATE_270); + fb->width << 16, fb->height << 16, + DRM_ROTATE_270); /* * Handle the AUX surface first since -- cgit From 7a5857c3c282c12a8bd0cfd2dd4a17a9252c2b4d Mon Sep 17 00:00:00 2001 From: "Sodhi, VunnyX" Date: Fri, 28 Oct 2016 16:59:41 +0530 Subject: ASoC: Intel: Skylake: Fix to turn off hdmi power on probe failure HDMI codec is required to be powered up before controller initialization for successful enumeration of codec. If the probe fails it needs to be powered off to balance the power state of HDMI codec. This fix balances the reference count in the error path before turning off the codec. Reported-by: Takashi Sakamoto Signed-off-by: Sodhi, VunnyX Signed-off-by: Subhransu S. Prusty Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 7b7a380b1245..3fc30cbe83c1 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -674,7 +674,7 @@ static int skl_probe(struct pci_dev *pci, if (skl->nhlt == NULL) { err = -ENODEV; - goto out_free; + goto out_display_power_off; } skl_nhlt_update_topology_bin(skl); @@ -746,6 +746,9 @@ out_mach_free: skl_machine_device_unregister(skl); out_nhlt_free: skl_nhlt_free(skl->nhlt); +out_display_power_off: + if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) + snd_hdac_display_power(bus, false); out_free: skl->init_failed = 1; skl_free(ebus); -- cgit From d64b5bf5b10ad95fd4a2684e1fc39eb7b00d9d0c Mon Sep 17 00:00:00 2001 From: Stephen Barber Date: Thu, 27 Oct 2016 18:02:27 -0700 Subject: ASoC: da7219: Connect output enable register to DAIOUT da7219 output (for headset capture) should be set to high-impedance when not in use, since it will otherwise interfere with output from other codecs attached to the same DAI. Signed-off-by: Stephen Barber Acked-by: Adam Thomson Signed-off-by: Mark Brown --- sound/soc/codecs/da7219.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/da7219.c b/sound/soc/codecs/da7219.c index 1152aa5e7c39..cf37936bfe3a 100644 --- a/sound/soc/codecs/da7219.c +++ b/sound/soc/codecs/da7219.c @@ -880,7 +880,8 @@ static const struct snd_soc_dapm_widget da7219_dapm_widgets[] = { SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), /* DAI */ - SND_SOC_DAPM_AIF_OUT("DAIOUT", "Capture", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("DAIOUT", "Capture", 0, DA7219_DAI_TDM_CTRL, + DA7219_DAI_OE_SHIFT, DA7219_NO_INVERT), SND_SOC_DAPM_AIF_IN("DAIIN", "Playback", 0, SND_SOC_NOPM, 0, 0), /* Output Muxes */ -- cgit From 72193a953ada9058e46970838cc42cbd18bf4eba Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Fri, 28 Oct 2016 11:38:53 +0100 Subject: regmap: Rename ret variable in regmap_read_poll_timeout As almost all of the callers of the regmap_read_poll_timeout macro will include a local ret variable we will always get a Sparse warning about the duplication of the ret variable: warning: symbol 'ret' shadows an earlier one Simply rename the ret variable in the marco to pollret to make this significantly less likely to happen. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- include/linux/regmap.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 9adc7b21903d..fc9e3c576f9c 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -116,22 +116,22 @@ struct reg_sequence { #define regmap_read_poll_timeout(map, addr, val, cond, sleep_us, timeout_us) \ ({ \ ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \ - int ret; \ + int pollret; \ might_sleep_if(sleep_us); \ for (;;) { \ - ret = regmap_read((map), (addr), &(val)); \ - if (ret) \ + pollret = regmap_read((map), (addr), &(val)); \ + if (pollret) \ break; \ if (cond) \ break; \ if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \ - ret = regmap_read((map), (addr), &(val)); \ + pollret = regmap_read((map), (addr), &(val)); \ break; \ } \ if (sleep_us) \ usleep_range((sleep_us >> 2) + 1, sleep_us); \ } \ - ret ?: ((cond) ? 0 : -ETIMEDOUT); \ + pollret ?: ((cond) ? 0 : -ETIMEDOUT); \ }) #ifdef CONFIG_REGMAP -- cgit From 73f5dfc68316bef2ab7062ecdefd4b0ca941b4c1 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 27 Oct 2016 12:34:02 +0200 Subject: ASoC: samsung: get access to DMA engine early to defer probe properly ASoC Samsung sub-drivers tried to get access to their DMA engine controllers as a last step in driver probe. If a DMA engine was not available yet, samsung_asoc_dma_platform_register() function ended in -EPROBE_DEFER, but the driver already registered its component to ASoC core. This patch moves samsung_asoc_dma_platform_register() call before registering any components, to the common place, where driver was gathering all needed resources. In case of Samsung Exynos i2s driver the issue was even worse. The driver managed already to register its secondary DAI platform device before even getting the DMA engine access. That together with -EPROBE_DEFER error code from samsung_i2s_probe() immediately triggered another round of deferred probe retry and in turn endless loop of driver probing. This patch fixes broken boot on Odroid XU3 and other Exynos5422-based boards. Signed-off-by: Marek Szyprowski Reviewed-by: Javier Martinez Canillas Reviewed-by: Sylwester Nawrocki Signed-off-by: Mark Brown --- sound/soc/samsung/ac97.c | 10 +++++----- sound/soc/samsung/i2s.c | 19 ++++++++++--------- sound/soc/samsung/pcm.c | 19 ++++++++++--------- sound/soc/samsung/s3c2412-i2s.c | 16 ++++++++-------- sound/soc/samsung/s3c24xx-i2s.c | 14 +++++++------- sound/soc/samsung/spdif.c | 14 +++++++------- 6 files changed, 47 insertions(+), 45 deletions(-) diff --git a/sound/soc/samsung/ac97.c b/sound/soc/samsung/ac97.c index 97d6700b1009..cbc0023c2bc8 100644 --- a/sound/soc/samsung/ac97.c +++ b/sound/soc/samsung/ac97.c @@ -383,11 +383,6 @@ static int s3c_ac97_probe(struct platform_device *pdev) goto err4; } - ret = devm_snd_soc_register_component(&pdev->dev, &s3c_ac97_component, - s3c_ac97_dai, ARRAY_SIZE(s3c_ac97_dai)); - if (ret) - goto err5; - ret = samsung_asoc_dma_platform_register(&pdev->dev, ac97_pdata->dma_filter, NULL, NULL); @@ -396,6 +391,11 @@ static int s3c_ac97_probe(struct platform_device *pdev) goto err5; } + ret = devm_snd_soc_register_component(&pdev->dev, &s3c_ac97_component, + s3c_ac97_dai, ARRAY_SIZE(s3c_ac97_dai)); + if (ret) + goto err5; + return 0; err5: free_irq(irq_res->start, NULL); diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index 7e32cf4581f8..7825bff45ae3 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -1237,14 +1237,14 @@ static int samsung_i2s_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Unable to get drvdata\n"); return -EFAULT; } - ret = devm_snd_soc_register_component(&sec_dai->pdev->dev, - &samsung_i2s_component, - &sec_dai->i2s_dai_drv, 1); + ret = samsung_asoc_dma_platform_register(&pdev->dev, + sec_dai->filter, "tx-sec", NULL); if (ret != 0) return ret; - return samsung_asoc_dma_platform_register(&pdev->dev, - sec_dai->filter, "tx-sec", NULL); + return devm_snd_soc_register_component(&sec_dai->pdev->dev, + &samsung_i2s_component, + &sec_dai->i2s_dai_drv, 1); } pri_dai = i2s_alloc_dai(pdev, false); @@ -1314,6 +1314,11 @@ static int samsung_i2s_probe(struct platform_device *pdev) if (quirks & QUIRK_PRI_6CHAN) pri_dai->i2s_dai_drv.playback.channels_max = 6; + ret = samsung_asoc_dma_platform_register(&pdev->dev, pri_dai->filter, + NULL, NULL); + if (ret < 0) + goto err_disable_clk; + if (quirks & QUIRK_SEC_DAI) { sec_dai = i2s_alloc_dai(pdev, true); if (!sec_dai) { @@ -1353,10 +1358,6 @@ static int samsung_i2s_probe(struct platform_device *pdev) if (ret < 0) goto err_free_dai; - ret = samsung_asoc_dma_platform_register(&pdev->dev, pri_dai->filter, - NULL, NULL); - if (ret < 0) - goto err_free_dai; pm_runtime_enable(&pdev->dev); diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c index 43e367a9acc3..c484985812ed 100644 --- a/sound/soc/samsung/pcm.c +++ b/sound/soc/samsung/pcm.c @@ -565,24 +565,25 @@ static int s3c_pcm_dev_probe(struct platform_device *pdev) pcm->dma_capture = &s3c_pcm_stereo_in[pdev->id]; pcm->dma_playback = &s3c_pcm_stereo_out[pdev->id]; + ret = samsung_asoc_dma_platform_register(&pdev->dev, filter, + NULL, NULL); + if (ret) { + dev_err(&pdev->dev, "failed to get register DMA: %d\n", ret); + goto err5; + } + pm_runtime_enable(&pdev->dev); ret = devm_snd_soc_register_component(&pdev->dev, &s3c_pcm_component, &s3c_pcm_dai[pdev->id], 1); if (ret != 0) { dev_err(&pdev->dev, "failed to get register DAI: %d\n", ret); - goto err5; - } - - ret = samsung_asoc_dma_platform_register(&pdev->dev, filter, - NULL, NULL); - if (ret) { - dev_err(&pdev->dev, "failed to get register DMA: %d\n", ret); - goto err5; + goto err6; } return 0; - +err6: + pm_runtime_disable(&pdev->dev); err5: clk_disable_unprepare(pcm->pclk); err4: diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c index 3e89fbc0c51d..0a4718207e6e 100644 --- a/sound/soc/samsung/s3c2412-i2s.c +++ b/sound/soc/samsung/s3c2412-i2s.c @@ -168,19 +168,19 @@ static int s3c2412_iis_dev_probe(struct platform_device *pdev) s3c2412_i2s_pcm_stereo_in.addr = res->start + S3C2412_IISRXD; s3c2412_i2s_pcm_stereo_in.filter_data = pdata->dma_capture; - ret = s3c_i2sv2_register_component(&pdev->dev, -1, - &s3c2412_i2s_component, - &s3c2412_i2s_dai); + ret = samsung_asoc_dma_platform_register(&pdev->dev, + pdata->dma_filter, + NULL, NULL); if (ret) { - pr_err("failed to register the dai\n"); + pr_err("failed to register the DMA: %d\n", ret); return ret; } - ret = samsung_asoc_dma_platform_register(&pdev->dev, - pdata->dma_filter, - NULL, NULL); + ret = s3c_i2sv2_register_component(&pdev->dev, -1, + &s3c2412_i2s_component, + &s3c2412_i2s_dai); if (ret) - pr_err("failed to register the DMA: %d\n", ret); + pr_err("failed to register the dai\n"); return ret; } diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c index c78a936a3099..9052f6a7073e 100644 --- a/sound/soc/samsung/s3c24xx-i2s.c +++ b/sound/soc/samsung/s3c24xx-i2s.c @@ -474,18 +474,18 @@ static int s3c24xx_iis_dev_probe(struct platform_device *pdev) s3c24xx_i2s_pcm_stereo_in.addr = res->start + S3C2410_IISFIFO; s3c24xx_i2s_pcm_stereo_in.filter_data = pdata->dma_capture; - ret = devm_snd_soc_register_component(&pdev->dev, - &s3c24xx_i2s_component, &s3c24xx_i2s_dai, 1); + ret = samsung_asoc_dma_platform_register(&pdev->dev, + pdata->dma_filter, + NULL, NULL); if (ret) { - pr_err("failed to register the dai\n"); + pr_err("failed to register the dma: %d\n", ret); return ret; } - ret = samsung_asoc_dma_platform_register(&pdev->dev, - pdata->dma_filter, - NULL, NULL); + ret = devm_snd_soc_register_component(&pdev->dev, + &s3c24xx_i2s_component, &s3c24xx_i2s_dai, 1); if (ret) - pr_err("failed to register the dma: %d\n", ret); + pr_err("failed to register the dai\n"); return ret; } diff --git a/sound/soc/samsung/spdif.c b/sound/soc/samsung/spdif.c index 26c1fbed4d35..704b7b12bf8b 100644 --- a/sound/soc/samsung/spdif.c +++ b/sound/soc/samsung/spdif.c @@ -416,6 +416,13 @@ static int spdif_probe(struct platform_device *pdev) goto err3; } + ret = samsung_asoc_dma_platform_register(&pdev->dev, filter, + NULL, NULL); + if (ret) { + dev_err(&pdev->dev, "failed to register DMA: %d\n", ret); + goto err4; + } + dev_set_drvdata(&pdev->dev, spdif); ret = devm_snd_soc_register_component(&pdev->dev, @@ -435,13 +442,6 @@ static int spdif_probe(struct platform_device *pdev) spdif->dma_playback = &spdif_stereo_out; - ret = samsung_asoc_dma_platform_register(&pdev->dev, filter, - NULL, NULL); - if (ret) { - dev_err(&pdev->dev, "failed to register DMA: %d\n", ret); - goto err4; - } - return 0; err4: iounmap(spdif->regs); -- cgit From 340327a62c4a145e098fd6c1116f12062eeec707 Mon Sep 17 00:00:00 2001 From: "Jon Medhurst (Tixy)" Date: Fri, 28 Oct 2016 09:18:24 +0100 Subject: ASoC: hdmi-codec: Fix hdmi_of_xlate_dai_name when #sound-dai-cells = <0> If a DAI specifies "#sound-dai-cells = <0>" in device-tree then hdmi_of_xlate_dai_name() will be called with zero args, which it isn't implemented to cope with. The resulting use of an uninitialised variable for the id will usually result in an error like: asoc-simple-card sound: parse error -11 asoc-simple-card: probe of sound failed with error -11 Fix this by using and id of zero if no arg is provided. Fixes: 9731f82d6016 ("ASoC: hdmi-codec: enable multi probe for same device") Signed-off-by: Jon Medhurst Signed-off-by: Mark Brown --- sound/soc/codecs/hdmi-codec.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c index b904492d7744..90b5948e0ff3 100644 --- a/sound/soc/codecs/hdmi-codec.c +++ b/sound/soc/codecs/hdmi-codec.c @@ -364,7 +364,12 @@ static int hdmi_of_xlate_dai_name(struct snd_soc_component *component, struct of_phandle_args *args, const char **dai_name) { - int id = args->args[0]; + int id; + + if (args->args_count) + id = args->args[0]; + else + id = 0; if (id < ARRAY_SIZE(hdmi_dai_name)) { *dai_name = hdmi_dai_name[id]; -- cgit From ba14fa1a57c07cca9d520ceded8d3da5beb6175f Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Thu, 27 Oct 2016 14:31:39 +0200 Subject: regulator: core: silence warning: "VDD1: ramp_delay not set" commit 73e705bf81ce ("regulator: core: Add set_voltage_time op") introduced a new rdev_warn() if the ramp_delay is 0. Apparently, on omap3/twl4030 platforms with dynamic voltage management this results in non-ending spurious messages like [ 511.143066] VDD1: ramp_delay not set [ 511.662322] VDD1: ramp_delay not set [ 513.903625] VDD1: ramp_delay not set [ 514.222198] VDD1: ramp_delay not set [ 517.062835] VDD1: ramp_delay not set [ 517.382568] VDD1: ramp_delay not set [ 520.142791] VDD1: ramp_delay not set [ 520.502593] VDD1: ramp_delay not set [ 523.062896] VDD1: ramp_delay not set [ 523.362701] VDD1: ramp_delay not set [ 526.143035] VDD1: ramp_delay not set I have observed this on GTA04 while it is reported to occur on N900 as well: https://bugzilla.kernel.org/show_bug.cgi?id=178371 This patch makes the warning appear only in debugging mode. Signed-off-by: H. Nikolaus Schaller Signed-off-by: Mark Brown --- drivers/regulator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 67426c0477d3..5c1519b229e0 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2754,7 +2754,7 @@ static int _regulator_set_voltage_time(struct regulator_dev *rdev, ramp_delay = rdev->desc->ramp_delay; if (ramp_delay == 0) { - rdev_warn(rdev, "ramp_delay not set\n"); + rdev_dbg(rdev, "ramp_delay not set\n"); return 0; } -- cgit From 06b113e9f28f8657715919087a3f54b77d1634ed Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Fri, 28 Oct 2016 09:59:38 -0700 Subject: clk: xgene: Don't call __pa on ioremaped address ioremaped addresses are not linearly mapped so the physical address can not be figured out via __pa. More generally, there is no guarantee that backing value of an ioremapped address is a physical address at all. The value here is only used for debugging so just drop the call to __pa on the ioremapped address. Fixes: 6ae5fd381251 ("clk: xgene: Silence sparse warnings") Signed-off-by: Laura Abbott Acked-by: Loc Ho Signed-off-by: Stephen Boyd --- drivers/clk/clk-xgene.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/clk/clk-xgene.c b/drivers/clk/clk-xgene.c index 5daddf5ecc4b..bc37030e38ba 100644 --- a/drivers/clk/clk-xgene.c +++ b/drivers/clk/clk-xgene.c @@ -463,22 +463,20 @@ static int xgene_clk_enable(struct clk_hw *hw) struct xgene_clk *pclk = to_xgene_clk(hw); unsigned long flags = 0; u32 data; - phys_addr_t reg; if (pclk->lock) spin_lock_irqsave(pclk->lock, flags); if (pclk->param.csr_reg != NULL) { pr_debug("%s clock enabled\n", clk_hw_get_name(hw)); - reg = __pa(pclk->param.csr_reg); /* First enable the clock */ data = xgene_clk_read(pclk->param.csr_reg + pclk->param.reg_clk_offset); data |= pclk->param.reg_clk_mask; xgene_clk_write(data, pclk->param.csr_reg + pclk->param.reg_clk_offset); - pr_debug("%s clock PADDR base %pa clk offset 0x%08X mask 0x%08X value 0x%08X\n", - clk_hw_get_name(hw), ®, + pr_debug("%s clk offset 0x%08X mask 0x%08X value 0x%08X\n", + clk_hw_get_name(hw), pclk->param.reg_clk_offset, pclk->param.reg_clk_mask, data); @@ -488,8 +486,8 @@ static int xgene_clk_enable(struct clk_hw *hw) data &= ~pclk->param.reg_csr_mask; xgene_clk_write(data, pclk->param.csr_reg + pclk->param.reg_csr_offset); - pr_debug("%s CSR RESET PADDR base %pa csr offset 0x%08X mask 0x%08X value 0x%08X\n", - clk_hw_get_name(hw), ®, + pr_debug("%s csr offset 0x%08X mask 0x%08X value 0x%08X\n", + clk_hw_get_name(hw), pclk->param.reg_csr_offset, pclk->param.reg_csr_mask, data); } -- cgit From 646cccb55b26b95b981ea9a63512260d0c21cac3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 26 Oct 2016 16:41:39 -0400 Subject: drm/amdgpu: add support for new smc firmware on tonga Newer tonga parts require new smc firmware. Reviewed-by: Huang Rui Reviewed-by: Eric Huang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c | 6 +++++- drivers/gpu/drm/amd/amdgpu/vi.c | 1 + 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index 7a8bfa34682f..d1267ea1d631 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -798,7 +798,11 @@ static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device, strcpy(fw_name, "amdgpu/topaz_smc.bin"); break; case CHIP_TONGA: - strcpy(fw_name, "amdgpu/tonga_smc.bin"); + if (((adev->pdev->device == 0x6939) && (adev->pdev->revision == 0xf1)) || + ((adev->pdev->device == 0x6938) && (adev->pdev->revision == 0xf1))) + strcpy(fw_name, "amdgpu/tonga_k_smc.bin"); + else + strcpy(fw_name, "amdgpu/tonga_smc.bin"); break; case CHIP_FIJI: strcpy(fw_name, "amdgpu/fiji_smc.bin"); diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c index 7c13090df7c0..12404fc47520 100644 --- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -81,6 +81,7 @@ MODULE_FIRMWARE("amdgpu/topaz_smc.bin"); MODULE_FIRMWARE("amdgpu/tonga_smc.bin"); +MODULE_FIRMWARE("amdgpu/tonga_k_smc.bin"); MODULE_FIRMWARE("amdgpu/fiji_smc.bin"); MODULE_FIRMWARE("amdgpu/polaris10_smc.bin"); MODULE_FIRMWARE("amdgpu/polaris10_smc_sk.bin"); -- cgit From 3b496626ee8f07919256a4e99cddf42ecd4ba891 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 27 Oct 2016 18:33:00 -0400 Subject: drm/amdgpu: add support for new smc firmware on iceland Newer iceland parts require new smc firmware. Reviewed-by: Huang Rui Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c | 7 ++++++- drivers/gpu/drm/amd/amdgpu/vi.c | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index d1267ea1d631..662976292535 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -795,7 +795,12 @@ static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device, if (!adev->pm.fw) { switch (adev->asic_type) { case CHIP_TOPAZ: - strcpy(fw_name, "amdgpu/topaz_smc.bin"); + if (((adev->pdev->device == 0x6900) && (adev->pdev->revision == 0x81)) || + ((adev->pdev->device == 0x6900) && (adev->pdev->revision == 0x83)) || + ((adev->pdev->device == 0x6907) && (adev->pdev->revision == 0x87))) + strcpy(fw_name, "amdgpu/topaz_k_smc.bin"); + else + strcpy(fw_name, "amdgpu/topaz_smc.bin"); break; case CHIP_TONGA: if (((adev->pdev->device == 0x6939) && (adev->pdev->revision == 0xf1)) || diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c index 12404fc47520..f62f1a74f890 100644 --- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -80,6 +80,7 @@ #include "dce_virtual.h" MODULE_FIRMWARE("amdgpu/topaz_smc.bin"); +MODULE_FIRMWARE("amdgpu/topaz_k_smc.bin"); MODULE_FIRMWARE("amdgpu/tonga_smc.bin"); MODULE_FIRMWARE("amdgpu/tonga_k_smc.bin"); MODULE_FIRMWARE("amdgpu/fiji_smc.bin"); -- cgit From 18e601d6adae5042f82d105ccd3d4498050f2ebf Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 24 Oct 2016 20:33:23 -0400 Subject: sunrpc: fix some missing rq_rbuffer assignments We've been seeing some crashes in testing that look like this: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] memcpy_orig+0x29/0x110 PGD 212ca2067 PUD 212ca3067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache ppdev parport_pc i2c_piix4 sg parport i2c_core virtio_balloon pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod ata_generic pata_acpi virtio_scsi 8139too ata_piix libata 8139cp mii virtio_pci floppy virtio_ring serio_raw virtio CPU: 1 PID: 1540 Comm: nfsd Not tainted 4.9.0-rc1 #39 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 task: ffff88020d7ed200 task.stack: ffff880211838000 RIP: 0010:[] [] memcpy_orig+0x29/0x110 RSP: 0018:ffff88021183bdd0 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff88020d7fa000 RCX: 000000f400000000 RDX: 0000000000000014 RSI: ffff880212927020 RDI: 0000000000000000 RBP: ffff88021183be30 R08: 01000000ef896996 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880211704ca8 R13: ffff88021473f000 R14: 00000000ef896996 R15: ffff880211704800 FS: 0000000000000000(0000) GS:ffff88021fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000212ca1000 CR4: 00000000000006e0 Stack: ffffffffa01ea087 ffffffff63400001 ffff880215145e00 ffff880211bacd00 ffff88021473f2b8 0000000000000004 00000000d0679d67 ffff880211bacd00 ffff88020d7fa000 ffff88021473f000 0000000000000000 ffff88020d7faa30 Call Trace: [] ? svc_tcp_recvfrom+0x5a7/0x790 [sunrpc] [] svc_recv+0xad8/0xbd0 [sunrpc] [] nfsd+0xde/0x160 [nfsd] [] ? nfsd_destroy+0x60/0x60 [nfsd] [] kthread+0xd8/0xf0 [] ret_from_fork+0x1f/0x40 [] ? kthread_park+0x60/0x60 Code: 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe 7c 35 48 83 ea 20 48 83 ea 20 4c 8b 06 4c 8b 4e 08 4c 8b 56 10 4c 8b 5e 18 48 8d 76 20 <4c> 89 07 4c 89 4f 08 4c 89 57 10 4c 89 5f 18 48 8d 7f 20 73 d4 RIP [] memcpy_orig+0x29/0x110 RSP CR2: 0000000000000000 Both Bruce and Eryu ran a bisect here and found that the problematic patch was 68778945e46 (SUNRPC: Separate buffer pointers for RPC Call and Reply messages). That patch changed rpc_xdr_encode to use a new rq_rbuffer pointer to set up the receive buffer, but didn't change all of the necessary codepaths to set it properly. In particular the backchannel setup was missing. We need to set rq_rbuffer whenever rq_buffer is set. Ensure that it is. Reviewed-by: Chuck Lever Tested-by: Chuck Lever Reported-by: Eryu Guan Tested-by: Eryu Guan Fixes: 68778945e46 "SUNRPC: Separate buffer pointers..." Reported-by: J. Bruce Fields Signed-off-by: Jeff Layton Signed-off-by: J. Bruce Fields --- net/sunrpc/xprtrdma/svc_rdma_backchannel.c | 1 + net/sunrpc/xprtsock.c | 1 + 2 files changed, 2 insertions(+) diff --git a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c index 2d8545c34095..fc4535ead7c2 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c +++ b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c @@ -182,6 +182,7 @@ xprt_rdma_bc_allocate(struct rpc_task *task) return -ENOMEM; rqst->rq_buffer = page_address(page); + rqst->rq_rbuffer = (char *)rqst->rq_buffer + rqst->rq_callsize; return 0; } diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 0137af1c0916..e01c825bc683 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -2563,6 +2563,7 @@ static int bc_malloc(struct rpc_task *task) buf->len = PAGE_SIZE; rqst->rq_buffer = buf->data; + rqst->rq_rbuffer = (char *)rqst->rq_buffer + rqst->rq_callsize; return 0; } -- cgit From 9a8b27fac5bbb77337cc2e5d31d37c9936782d87 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 27 Oct 2016 15:22:13 -0700 Subject: raid5-cache: correct condition for empty metadata write As long as we recover one metadata block, we should write the empty metadata write. The original code could make recovery corrupted if only one meta is valid. Reported-by: Zhengyuan Liu Signed-off-by: Shaohua Li --- drivers/md/raid5-cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c index 981f85515191..a227a9f3ee65 100644 --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -1087,7 +1087,7 @@ static int r5l_recovery_log(struct r5l_log *log) * 1's seq + 10 and let superblock points to meta2. The same recovery will * not think meta 3 is a valid meta, because its seq doesn't match */ - if (ctx.seq > log->last_cp_seq + 1) { + if (ctx.seq > log->last_cp_seq) { int ret; ret = r5l_log_write_empty_meta_block(log, ctx.pos, ctx.seq + 10); -- cgit From 7449f699b2fb23bdee0a0f03aa4efb5f96fd403f Mon Sep 17 00:00:00 2001 From: Tomasz Majchrzak Date: Fri, 28 Oct 2016 14:45:58 +0200 Subject: raid1: handle read error also in readonly mode If write is the first operation on a disk and it happens not to be aligned to page size, block layer sends read request first. If read operation fails, the disk is set as failed as no attempt to fix the error is made because array is in auto-readonly mode. Similarily, the disk is set as failed for read-only array. Take the same approach as in raid10. Don't fail the disk if array is in readonly or auto-readonly mode. Try to redirect the request first and if unsuccessful, return a read error. Signed-off-by: Tomasz Majchrzak Signed-off-by: Shaohua Li --- drivers/md/raid1.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index db536a68b2ee..29e2df5cd77b 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -2297,17 +2297,23 @@ static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio) * This is all done synchronously while the array is * frozen */ + + bio = r1_bio->bios[r1_bio->read_disk]; + bdevname(bio->bi_bdev, b); + bio_put(bio); + r1_bio->bios[r1_bio->read_disk] = NULL; + if (mddev->ro == 0) { freeze_array(conf, 1); fix_read_error(conf, r1_bio->read_disk, r1_bio->sector, r1_bio->sectors); unfreeze_array(conf); - } else - md_error(mddev, conf->mirrors[r1_bio->read_disk].rdev); + } else { + r1_bio->bios[r1_bio->read_disk] = IO_BLOCKED; + } + rdev_dec_pending(conf->mirrors[r1_bio->read_disk].rdev, conf->mddev); - bio = r1_bio->bios[r1_bio->read_disk]; - bdevname(bio->bi_bdev, b); read_more: disk = read_balance(conf, r1_bio, &max_sectors); if (disk == -1) { @@ -2318,11 +2324,6 @@ read_more: } else { const unsigned long do_sync = r1_bio->master_bio->bi_opf & REQ_SYNC; - if (bio) { - r1_bio->bios[r1_bio->read_disk] = - mddev->ro ? IO_BLOCKED : NULL; - bio_put(bio); - } r1_bio->read_disk = disk; bio = bio_clone_mddev(r1_bio->master_bio, GFP_NOIO, mddev); bio_trim(bio, r1_bio->sector - bio->bi_iter.bi_sector, -- cgit From 1217e1d1999ed6c9c1e1b1acae0a74ab70464ae2 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 28 Oct 2016 15:59:41 +1100 Subject: md: be careful not lot leak internal curr_resync value into metadata. -- (all) mddev->curr_resync usually records where the current resync is up to, but during the starting phase it has some "magic" values. 1 - means that the array is trying to start a resync, but has yielded to another array which shares physical devices, and also needs to start a resync 2 - means the array is trying to start resync, but has found another array which shares physical devices and has already started resync. 3 - means that resync has commensed, but it is possible that nothing has actually been resynced yet. It is important that this value not be visible to user-space and particularly that it doesn't get written to the metadata, as the resync or recovery checkpoint. In part, this is because it may be slightly higher than the correct value, though this is very rare. In part, because it is not a multiple of 4K, and some devices only support 4K aligned accesses. There are two places where this value is propagates into either ->curr_resync_completed or ->recovery_cp or ->recovery_offset. These currently avoid the propagation of values 1 and 3, but will allow 3 to leak through. Change them to only propagate the value if it is > 3. As this can cause an array to fail, the patch is suitable for -stable. Cc: stable@vger.kernel.org (v3.7+) Reported-by: Viswesh Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/md.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 25b57a55db1a..2089d46b0eb8 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -8144,14 +8144,14 @@ void md_do_sync(struct md_thread *thread) if (!test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) && !test_bit(MD_RECOVERY_INTR, &mddev->recovery) && - mddev->curr_resync > 2) { + mddev->curr_resync > 3) { mddev->curr_resync_completed = mddev->curr_resync; sysfs_notify(&mddev->kobj, NULL, "sync_completed"); } mddev->pers->sync_request(mddev, max_sectors, &skipped); if (!test_bit(MD_RECOVERY_CHECK, &mddev->recovery) && - mddev->curr_resync > 2) { + mddev->curr_resync > 3) { if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) { if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) { if (mddev->curr_resync >= mddev->recovery_cp) { -- cgit From 5ee67b587a2b0092bdea3123349c8c3c43e8e46e Mon Sep 17 00:00:00 2001 From: Yuan Yao Date: Mon, 17 Oct 2016 18:02:34 +0800 Subject: spi: dspi: clear SPI_SR before enable interrupt Once dspi is used in uboot, the SPI_SR have been set by some value. At this time, if kernel enable the interrupt before clear the status flag, that will trigger the wrong interrupt. Signed-off-by: Yuan Yao Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 35c0dd945668..a67b0ff6a362 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -70,6 +70,7 @@ #define SPI_SR 0x2c #define SPI_SR_EOQF 0x10000000 #define SPI_SR_TCFQF 0x80000000 +#define SPI_SR_CLEAR 0xdaad0000 #define SPI_RSER 0x30 #define SPI_RSER_EOQFE 0x10000000 @@ -646,6 +647,11 @@ static const struct regmap_config dspi_regmap_config = { .max_register = 0x88, }; +static void dspi_init(struct fsl_dspi *dspi) +{ + regmap_write(dspi->regmap, SPI_SR, SPI_SR_CLEAR); +} + static int dspi_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -709,6 +715,7 @@ static int dspi_probe(struct platform_device *pdev) return PTR_ERR(dspi->regmap); } + dspi_init(dspi); dspi->irq = platform_get_irq(pdev, 0); if (dspi->irq < 0) { dev_err(&pdev->dev, "can't get platform irq\n"); -- cgit From d304286abbbe7ed6228a553a56ba054e900907eb Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Tue, 25 Oct 2016 23:07:38 +0200 Subject: iio: st_sensors: fix scale configuration for h3lis331dl fix scale configuration/parsing for h3lis331dl accel driver when sensitivity is higher than 1(m/s^2)/digit Signed-off-by: Lorenzo Bianconi Fixes: 1e52fefc9b0c ("iio: accel: Add support for the h3lis331dl accelerometer") Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/st_accel_core.c | 12 ++++++++---- drivers/iio/common/st_sensors/st_sensors_core.c | 8 +++++--- 2 files changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index da3fb069ec5c..ce69048c88e9 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -743,8 +743,8 @@ static int st_accel_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: - *val = 0; - *val2 = adata->current_fullscale->gain; + *val = adata->current_fullscale->gain / 1000000; + *val2 = adata->current_fullscale->gain % 1000000; return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_SAMP_FREQ: *val = adata->odr; @@ -763,9 +763,13 @@ static int st_accel_write_raw(struct iio_dev *indio_dev, int err; switch (mask) { - case IIO_CHAN_INFO_SCALE: - err = st_sensors_set_fullscale_by_gain(indio_dev, val2); + case IIO_CHAN_INFO_SCALE: { + int gain; + + gain = val * 1000000 + val2; + err = st_sensors_set_fullscale_by_gain(indio_dev, gain); break; + } case IIO_CHAN_INFO_SAMP_FREQ: if (val2) return -EINVAL; diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 285a64a589d7..975a1f19f747 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -612,7 +612,7 @@ EXPORT_SYMBOL(st_sensors_sysfs_sampling_frequency_avail); ssize_t st_sensors_sysfs_scale_avail(struct device *dev, struct device_attribute *attr, char *buf) { - int i, len = 0; + int i, len = 0, q, r; struct iio_dev *indio_dev = dev_get_drvdata(dev); struct st_sensor_data *sdata = iio_priv(indio_dev); @@ -621,8 +621,10 @@ ssize_t st_sensors_sysfs_scale_avail(struct device *dev, if (sdata->sensor_settings->fs.fs_avl[i].num == 0) break; - len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", - sdata->sensor_settings->fs.fs_avl[i].gain); + q = sdata->sensor_settings->fs.fs_avl[i].gain / 1000000; + r = sdata->sensor_settings->fs.fs_avl[i].gain % 1000000; + + len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ", q, r); } mutex_unlock(&indio_dev->mlock); buf[len - 1] = '\n'; -- cgit From 0b944d3a4bba6b25f43aed530f4fa85c04d162a6 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 30 Oct 2016 11:42:01 -0500 Subject: aio: hold an extra file reference over AIO read/write operations Otherwise we might dereference an already freed file and/or inode when aio_complete is called before we return from the read_iter or write_iter method. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/aio.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/aio.c b/fs/aio.c index 1157e13a36d6..0aa71d338c04 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1460,6 +1460,7 @@ rw_common: return ret; } + get_file(file); if (rw == WRITE) file_start_write(file); @@ -1467,6 +1468,7 @@ rw_common: if (rw == WRITE) file_end_write(file); + fput(file); kfree(iovec); break; -- cgit From 723c038475b78edc9327eb952f95f9881cc9d79d Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 30 Oct 2016 11:42:02 -0500 Subject: fs: remove the never implemented aio_fsync file operation Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- Documentation/filesystems/Locking | 1 - Documentation/filesystems/vfs.txt | 1 - fs/aio.c | 14 -------------- fs/ntfs/dir.c | 2 -- include/linux/fs.h | 1 - 5 files changed, 19 deletions(-) diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 14cdc101d165..1b5f15653b1b 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -447,7 +447,6 @@ prototypes: int (*flush) (struct file *); int (*release) (struct inode *, struct file *); int (*fsync) (struct file *, loff_t start, loff_t end, int datasync); - int (*aio_fsync) (struct kiocb *, int datasync); int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); ssize_t (*readv) (struct file *, const struct iovec *, unsigned long, diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index d619c8d71966..b5039a00caaf 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -828,7 +828,6 @@ struct file_operations { int (*flush) (struct file *, fl_owner_t id); int (*release) (struct inode *, struct file *); int (*fsync) (struct file *, loff_t, loff_t, int datasync); - int (*aio_fsync) (struct kiocb *, int datasync); int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int); diff --git a/fs/aio.c b/fs/aio.c index 0aa71d338c04..2a6030af6ba5 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1472,20 +1472,6 @@ rw_common: kfree(iovec); break; - case IOCB_CMD_FDSYNC: - if (!file->f_op->aio_fsync) - return -EINVAL; - - ret = file->f_op->aio_fsync(req, 1); - break; - - case IOCB_CMD_FSYNC: - if (!file->f_op->aio_fsync) - return -EINVAL; - - ret = file->f_op->aio_fsync(req, 0); - break; - default: pr_debug("EINVAL: no operation provided\n"); return -EINVAL; diff --git a/fs/ntfs/dir.c b/fs/ntfs/dir.c index a18613579001..0ee19ecc982d 100644 --- a/fs/ntfs/dir.c +++ b/fs/ntfs/dir.c @@ -1544,8 +1544,6 @@ const struct file_operations ntfs_dir_ops = { .iterate = ntfs_readdir, /* Read directory contents. */ #ifdef NTFS_RW .fsync = ntfs_dir_fsync, /* Sync a directory to disk. */ - /*.aio_fsync = ,*/ /* Sync all outstanding async - i/o operations on a kiocb. */ #endif /* NTFS_RW */ /*.ioctl = ,*/ /* Perform function on the mounted filesystem. */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 16d2b6e874d6..ff7bcd9e8398 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1709,7 +1709,6 @@ struct file_operations { int (*flush) (struct file *, fl_owner_t id); int (*release) (struct inode *, struct file *); int (*fsync) (struct file *, loff_t, loff_t, int datasync); - int (*aio_fsync) (struct kiocb *, int datasync); int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int); -- cgit From 89319d31d2d097da8e27fb0e0ae9d532f4f16827 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 30 Oct 2016 11:42:03 -0500 Subject: fs: remove aio_run_iocb Pass the ABI iocb structure to aio_setup_rw and let it handle the non-vectored I/O case as well. With that and a new helper for the AIO return value handling we can now define new aio_read and aio_write helpers that implement reads and writes in a self-contained way without duplicating too much code. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/aio.c | 182 +++++++++++++++++++++++++++++++++------------------------------ 1 file changed, 94 insertions(+), 88 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index 2a6030af6ba5..c19755187ca5 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1392,110 +1392,100 @@ SYSCALL_DEFINE1(io_destroy, aio_context_t, ctx) return -EINVAL; } -typedef ssize_t (rw_iter_op)(struct kiocb *, struct iov_iter *); - -static int aio_setup_vectored_rw(int rw, char __user *buf, size_t len, - struct iovec **iovec, - bool compat, - struct iov_iter *iter) +static int aio_setup_rw(int rw, struct iocb *iocb, struct iovec **iovec, + bool vectored, bool compat, struct iov_iter *iter) { + void __user *buf = (void __user *)(uintptr_t)iocb->aio_buf; + size_t len = iocb->aio_nbytes; + + if (!vectored) { + ssize_t ret = import_single_range(rw, buf, len, *iovec, iter); + *iovec = NULL; + return ret; + } #ifdef CONFIG_COMPAT if (compat) - return compat_import_iovec(rw, - (struct compat_iovec __user *)buf, - len, UIO_FASTIOV, iovec, iter); + return compat_import_iovec(rw, buf, len, UIO_FASTIOV, iovec, + iter); #endif - return import_iovec(rw, (struct iovec __user *)buf, - len, UIO_FASTIOV, iovec, iter); + return import_iovec(rw, buf, len, UIO_FASTIOV, iovec, iter); } -/* - * aio_run_iocb: - * Performs the initial checks and io submission. - */ -static ssize_t aio_run_iocb(struct kiocb *req, unsigned opcode, - char __user *buf, size_t len, bool compat) +static inline ssize_t aio_ret(struct kiocb *req, ssize_t ret) +{ + switch (ret) { + case -EIOCBQUEUED: + return ret; + case -ERESTARTSYS: + case -ERESTARTNOINTR: + case -ERESTARTNOHAND: + case -ERESTART_RESTARTBLOCK: + /* + * There's no easy way to restart the syscall since other AIO's + * may be already running. Just fail this IO with EINTR. + */ + ret = -EINTR; + /*FALLTHRU*/ + default: + aio_complete(req, ret, 0); + return 0; + } +} + +static ssize_t aio_read(struct kiocb *req, struct iocb *iocb, bool vectored, + bool compat) { struct file *file = req->ki_filp; - ssize_t ret; - int rw; - fmode_t mode; - rw_iter_op *iter_op; struct iovec inline_vecs[UIO_FASTIOV], *iovec = inline_vecs; struct iov_iter iter; + ssize_t ret; - switch (opcode) { - case IOCB_CMD_PREAD: - case IOCB_CMD_PREADV: - mode = FMODE_READ; - rw = READ; - iter_op = file->f_op->read_iter; - goto rw_common; - - case IOCB_CMD_PWRITE: - case IOCB_CMD_PWRITEV: - mode = FMODE_WRITE; - rw = WRITE; - iter_op = file->f_op->write_iter; - goto rw_common; -rw_common: - if (unlikely(!(file->f_mode & mode))) - return -EBADF; - - if (!iter_op) - return -EINVAL; - - if (opcode == IOCB_CMD_PREADV || opcode == IOCB_CMD_PWRITEV) - ret = aio_setup_vectored_rw(rw, buf, len, - &iovec, compat, &iter); - else { - ret = import_single_range(rw, buf, len, iovec, &iter); - iovec = NULL; - } - if (!ret) - ret = rw_verify_area(rw, file, &req->ki_pos, - iov_iter_count(&iter)); - if (ret < 0) { - kfree(iovec); - return ret; - } - - get_file(file); - if (rw == WRITE) - file_start_write(file); + if (unlikely(!(file->f_mode & FMODE_READ))) + return -EBADF; + if (unlikely(!file->f_op->read_iter)) + return -EINVAL; - ret = iter_op(req, &iter); + ret = aio_setup_rw(READ, iocb, &iovec, vectored, compat, &iter); + if (ret) + return ret; + ret = rw_verify_area(READ, file, &req->ki_pos, iov_iter_count(&iter)); + if (!ret) + ret = aio_ret(req, file->f_op->read_iter(req, &iter)); + kfree(iovec); + return ret; +} - if (rw == WRITE) - file_end_write(file); - fput(file); - kfree(iovec); - break; +static ssize_t aio_write(struct kiocb *req, struct iocb *iocb, bool vectored, + bool compat) +{ + struct file *file = req->ki_filp; + struct iovec inline_vecs[UIO_FASTIOV], *iovec = inline_vecs; + struct iov_iter iter; + ssize_t ret; - default: - pr_debug("EINVAL: no operation provided\n"); + if (unlikely(!(file->f_mode & FMODE_WRITE))) + return -EBADF; + if (unlikely(!file->f_op->write_iter)) return -EINVAL; - } - if (ret != -EIOCBQUEUED) { - /* - * There's no easy way to restart the syscall since other AIO's - * may be already running. Just fail this IO with EINTR. - */ - if (unlikely(ret == -ERESTARTSYS || ret == -ERESTARTNOINTR || - ret == -ERESTARTNOHAND || - ret == -ERESTART_RESTARTBLOCK)) - ret = -EINTR; - aio_complete(req, ret, 0); + ret = aio_setup_rw(WRITE, iocb, &iovec, vectored, compat, &iter); + if (ret) + return ret; + ret = rw_verify_area(WRITE, file, &req->ki_pos, iov_iter_count(&iter)); + if (!ret) { + file_start_write(file); + ret = aio_ret(req, file->f_op->write_iter(req, &iter)); + file_end_write(file); } - - return 0; + kfree(iovec); + return ret; } static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, struct iocb *iocb, bool compat) { struct aio_kiocb *req; + struct file *file; ssize_t ret; /* enforce forwards compatibility on users */ @@ -1518,7 +1508,7 @@ static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, if (unlikely(!req)) return -EAGAIN; - req->common.ki_filp = fget(iocb->aio_fildes); + req->common.ki_filp = file = fget(iocb->aio_fildes); if (unlikely(!req->common.ki_filp)) { ret = -EBADF; goto out_put_req; @@ -1553,13 +1543,29 @@ static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, req->ki_user_iocb = user_iocb; req->ki_user_data = iocb->aio_data; - ret = aio_run_iocb(&req->common, iocb->aio_lio_opcode, - (char __user *)(unsigned long)iocb->aio_buf, - iocb->aio_nbytes, - compat); - if (ret) - goto out_put_req; + get_file(file); + switch (iocb->aio_lio_opcode) { + case IOCB_CMD_PREAD: + ret = aio_read(&req->common, iocb, false, compat); + break; + case IOCB_CMD_PWRITE: + ret = aio_write(&req->common, iocb, false, compat); + break; + case IOCB_CMD_PREADV: + ret = aio_read(&req->common, iocb, true, compat); + break; + case IOCB_CMD_PWRITEV: + ret = aio_write(&req->common, iocb, true, compat); + break; + default: + pr_debug("invalid aio operation %d\n", iocb->aio_lio_opcode); + ret = -EINVAL; + break; + } + fput(file); + if (ret && ret != -EIOCBQUEUED) + goto out_put_req; return 0; out_put_req: put_reqs_available(ctx, 1); -- cgit From 70fe2f48152e60664809e2fed76bbb50c9fa2aa3 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Sun, 30 Oct 2016 11:42:04 -0500 Subject: aio: fix freeze protection of aio writes Currently we dropped freeze protection of aio writes just after IO was submitted. Thus aio write could be in flight while the filesystem was frozen and that could result in unexpected situation like aio completion wanting to convert extent type on frozen filesystem. Testcase from Dmitry triggering this is like: for ((i=0;i<60;i++));do fsfreeze -f /mnt ;sleep 1;fsfreeze -u /mnt;done & fio --bs=4k --ioengine=libaio --iodepth=128 --size=1g --direct=1 \ --runtime=60 --filename=/mnt/file --name=rand-write --rw=randwrite Fix the problem by dropping freeze protection only once IO is completed in aio_complete(). Reported-by: Dmitry Monakhov Signed-off-by: Jan Kara [hch: forward ported on top of various VFS and aio changes] Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/aio.c | 19 ++++++++++++++++++- include/linux/fs.h | 1 + 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/fs/aio.c b/fs/aio.c index c19755187ca5..428484f2f841 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1078,6 +1078,17 @@ static void aio_complete(struct kiocb *kiocb, long res, long res2) unsigned tail, pos, head; unsigned long flags; + if (kiocb->ki_flags & IOCB_WRITE) { + struct file *file = kiocb->ki_filp; + + /* + * Tell lockdep we inherited freeze protection from submission + * thread. + */ + __sb_writers_acquired(file_inode(file)->i_sb, SB_FREEZE_WRITE); + file_end_write(file); + } + /* * Special case handling for sync iocbs: * - events go directly into the iocb for fast handling @@ -1473,9 +1484,15 @@ static ssize_t aio_write(struct kiocb *req, struct iocb *iocb, bool vectored, return ret; ret = rw_verify_area(WRITE, file, &req->ki_pos, iov_iter_count(&iter)); if (!ret) { + req->ki_flags |= IOCB_WRITE; file_start_write(file); ret = aio_ret(req, file->f_op->write_iter(req, &iter)); - file_end_write(file); + /* + * We release freeze protection in aio_complete(). Fool lockdep + * by telling it the lock got released so that it doesn't + * complain about held lock when we return to userspace. + */ + __sb_writers_release(file_inode(file)->i_sb, SB_FREEZE_WRITE); } kfree(iovec); return ret; diff --git a/include/linux/fs.h b/include/linux/fs.h index ff7bcd9e8398..dc0478c07b2a 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -321,6 +321,7 @@ struct writeback_control; #define IOCB_HIPRI (1 << 3) #define IOCB_DSYNC (1 << 4) #define IOCB_SYNC (1 << 5) +#define IOCB_WRITE (1 << 6) struct kiocb { struct file *ki_filp; -- cgit From a0be1db4304f51c99af6b6e515549794182a94df Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 14 Sep 2016 17:33:26 +0100 Subject: virtio_pci: Limit DMA mask to 44 bits for legacy virtio devices Legacy virtio defines the virtqueue base using a 32-bit PFN field, with a read-only register indicating a fixed page size of 4k. This can cause problems for DMA allocators that allocate top down from the DMA mask, which is set to 64 bits. In this case, the addresses are silently truncated to 44-bit, leading to IOMMU faults, failure to read from the queue or data corruption. This patch restricts the coherent DMA mask for legacy PCI virtio devices to 44 bits, which matches the specification. Cc: stable@vger.kernel.org Cc: Andy Lutomirski Cc: Michael S. Tsirkin Cc: Benjamin Serebrin Signed-off-by: Will Deacon Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio_pci_legacy.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c index 8c4e61783441..6d9e5173d5fa 100644 --- a/drivers/virtio/virtio_pci_legacy.c +++ b/drivers/virtio/virtio_pci_legacy.c @@ -212,10 +212,18 @@ int virtio_pci_legacy_probe(struct virtio_pci_device *vp_dev) return -ENODEV; } - rc = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(64)); - if (rc) - rc = dma_set_mask_and_coherent(&pci_dev->dev, - DMA_BIT_MASK(32)); + rc = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(64)); + if (rc) { + rc = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32)); + } else { + /* + * The virtio ring base address is expressed as a 32-bit PFN, + * with a page size of 1 << VIRTIO_PCI_QUEUE_ADDR_SHIFT. + */ + dma_set_coherent_mask(&pci_dev->dev, + DMA_BIT_MASK(32 + VIRTIO_PCI_QUEUE_ADDR_SHIFT)); + } + if (rc) dev_warn(&pci_dev->dev, "Failed to enable 64-bit or 32-bit DMA. Trying to continue, but this might not work.\n"); -- cgit From 0ea1e4a6d9b62cf29e210d2b4ba9fd43917522e3 Mon Sep 17 00:00:00 2001 From: Ladi Prosek Date: Wed, 31 Aug 2016 14:00:04 +0200 Subject: virtio_ring: Make interrupt suppression spec compliant According to the spec, if the VIRTIO_RING_F_EVENT_IDX feature bit is negotiated the driver MUST set flags to 0. Not dirtying the available ring in virtqueue_disable_cb also has a minor positive performance impact, improving L1 dcache load missed by ~0.5% in vring_bench. Writes to the used event field (vring_used_event) are still unconditional. Cc: Michael S. Tsirkin Cc: # f277ec4 virtio_ring: shadow available Cc: Signed-off-by: Ladi Prosek Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio_ring.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index ed9c9eeedfe5..6b2cd922d322 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -732,7 +732,8 @@ void virtqueue_disable_cb(struct virtqueue *_vq) if (!(vq->avail_flags_shadow & VRING_AVAIL_F_NO_INTERRUPT)) { vq->avail_flags_shadow |= VRING_AVAIL_F_NO_INTERRUPT; - vq->vring.avail->flags = cpu_to_virtio16(_vq->vdev, vq->avail_flags_shadow); + if (!vq->event) + vq->vring.avail->flags = cpu_to_virtio16(_vq->vdev, vq->avail_flags_shadow); } } @@ -764,7 +765,8 @@ unsigned virtqueue_enable_cb_prepare(struct virtqueue *_vq) * entry. Always do both to keep code simple. */ if (vq->avail_flags_shadow & VRING_AVAIL_F_NO_INTERRUPT) { vq->avail_flags_shadow &= ~VRING_AVAIL_F_NO_INTERRUPT; - vq->vring.avail->flags = cpu_to_virtio16(_vq->vdev, vq->avail_flags_shadow); + if (!vq->event) + vq->vring.avail->flags = cpu_to_virtio16(_vq->vdev, vq->avail_flags_shadow); } vring_used_event(&vq->vring) = cpu_to_virtio16(_vq->vdev, last_used_idx = vq->last_used_idx); END_USE(vq); @@ -832,10 +834,11 @@ bool virtqueue_enable_cb_delayed(struct virtqueue *_vq) * more to do. */ /* Depending on the VIRTIO_RING_F_USED_EVENT_IDX feature, we need to * either clear the flags bit or point the event index at the next - * entry. Always do both to keep code simple. */ + * entry. Always update the event index to keep code simple. */ if (vq->avail_flags_shadow & VRING_AVAIL_F_NO_INTERRUPT) { vq->avail_flags_shadow &= ~VRING_AVAIL_F_NO_INTERRUPT; - vq->vring.avail->flags = cpu_to_virtio16(_vq->vdev, vq->avail_flags_shadow); + if (!vq->event) + vq->vring.avail->flags = cpu_to_virtio16(_vq->vdev, vq->avail_flags_shadow); } /* TODO: tune this threshold */ bufs = (u16)(vq->avail_idx_shadow - vq->last_used_idx) * 3 / 4; @@ -953,7 +956,8 @@ struct virtqueue *__vring_new_virtqueue(unsigned int index, /* No callback? Tell other side not to bother us. */ if (!callback) { vq->avail_flags_shadow |= VRING_AVAIL_F_NO_INTERRUPT; - vq->vring.avail->flags = cpu_to_virtio16(vdev, vq->avail_flags_shadow); + if (!vq->event) + vq->vring.avail->flags = cpu_to_virtio16(vdev, vq->avail_flags_shadow); } /* Put everything in free lists. */ -- cgit From 8424af5336b34043a705d66bdf2c1428048ef085 Mon Sep 17 00:00:00 2001 From: Konstantin Neumoin Date: Thu, 29 Sep 2016 13:17:12 +0300 Subject: virtio: update balloon size in balloon "probe" The following commit 'fad7b7b27b6a (virtio_balloon: Use a workqueue instead of "vballoon" kthread)' has added a regression. Original code with kthread starts the thread inside probe and checks the necessity to update balloon inside the thread immediately. Nowadays the code behaves differently. Work is queued only on the first command from the host after the negotiation. Thus there is a window especially at the guest startup or the module reloading when the balloon size is not updated until the notification from the host. This patch adds balloon size check at the end of the probe to match original behaviour. Signed-off-by: Konstantin Neumoin Signed-off-by: Denis V. Lunev Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio_balloon.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 4e7003db12c4..181793f07852 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -577,6 +577,8 @@ static int virtballoon_probe(struct virtio_device *vdev) virtio_device_ready(vdev); + if (towards_target(vb)) + virtballoon_changed(vdev); return 0; out_del_vqs: -- cgit From 44d65ea1615099ae252407f2554338d450cfdb1c Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 6 Oct 2016 11:39:10 +0200 Subject: ringtest: use link-time optimization By using -flto and -fwhole-program, all functions from the ring implementation can be treated as static and possibly inlined. Force this to happen through the GCC flatten attribute. Signed-off-by: Paolo Bonzini Signed-off-by: Michael S. Tsirkin --- tools/virtio/ringtest/Makefile | 4 ++-- tools/virtio/ringtest/main.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/virtio/ringtest/Makefile b/tools/virtio/ringtest/Makefile index 877a8a4721b6..c012edbdb13b 100644 --- a/tools/virtio/ringtest/Makefile +++ b/tools/virtio/ringtest/Makefile @@ -3,8 +3,8 @@ all: all: ring virtio_ring_0_9 virtio_ring_poll virtio_ring_inorder ptr_ring noring CFLAGS += -Wall -CFLAGS += -pthread -O2 -ggdb -LDFLAGS += -pthread -O2 -ggdb +CFLAGS += -pthread -O2 -ggdb -flto -fwhole-program +LDFLAGS += -pthread -O2 -ggdb -flto -fwhole-program main.o: main.c main.h ring.o: ring.c main.h diff --git a/tools/virtio/ringtest/main.c b/tools/virtio/ringtest/main.c index 147abb452a6c..bda7f0dad981 100644 --- a/tools/virtio/ringtest/main.c +++ b/tools/virtio/ringtest/main.c @@ -96,7 +96,7 @@ void set_affinity(const char *arg) assert(!ret); } -static void run_guest(void) +static void __attribute__((__flatten__)) run_guest(void) { int completed_before; int completed = 0; @@ -149,7 +149,7 @@ static void run_guest(void) } } -static void run_host(void) +static void __attribute__((__flatten__)) run_host(void) { int completed_before; int completed = 0; -- cgit From d3c3589b8b3cd4fabf4cd137facb42a7fb36bd7f Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 6 Oct 2016 11:39:11 +0200 Subject: ringtest: commonize implementation of poll_avail/poll_used Provide new primitives used_empty/avail_empty and build poll_avail/poll_used on top of it. Signed-off-by: Paolo Bonzini Signed-off-by: Michael S. Tsirkin --- tools/virtio/ringtest/main.c | 12 +++++++ tools/virtio/ringtest/main.h | 4 +-- tools/virtio/ringtest/noring.c | 6 ++-- tools/virtio/ringtest/ptr_ring.c | 22 +++--------- tools/virtio/ringtest/ring.c | 18 ++++------ tools/virtio/ringtest/virtio_ring_0_9.c | 64 ++++++++------------------------- 6 files changed, 43 insertions(+), 83 deletions(-) diff --git a/tools/virtio/ringtest/main.c b/tools/virtio/ringtest/main.c index bda7f0dad981..b00ecd619969 100644 --- a/tools/virtio/ringtest/main.c +++ b/tools/virtio/ringtest/main.c @@ -96,6 +96,12 @@ void set_affinity(const char *arg) assert(!ret); } +void poll_used(void) +{ + while (used_empty()) + busy_wait(); +} + static void __attribute__((__flatten__)) run_guest(void) { int completed_before; @@ -149,6 +155,12 @@ static void __attribute__((__flatten__)) run_guest(void) } } +void poll_avail(void) +{ + while (avail_empty()) + busy_wait(); +} + static void __attribute__((__flatten__)) run_host(void) { int completed_before; diff --git a/tools/virtio/ringtest/main.h b/tools/virtio/ringtest/main.h index 16917acb0ade..34e63cc4c572 100644 --- a/tools/virtio/ringtest/main.h +++ b/tools/virtio/ringtest/main.h @@ -56,15 +56,15 @@ void alloc_ring(void); int add_inbuf(unsigned, void *, void *); void *get_buf(unsigned *, void **); void disable_call(); +bool used_empty(); bool enable_call(); void kick_available(); -void poll_used(); /* host side */ void disable_kick(); +bool avail_empty(); bool enable_kick(); bool use_buf(unsigned *, void **); void call_used(); -void poll_avail(); /* implemented by main */ extern bool do_sleep; diff --git a/tools/virtio/ringtest/noring.c b/tools/virtio/ringtest/noring.c index eda2f4824130..b8d1c1daac7c 100644 --- a/tools/virtio/ringtest/noring.c +++ b/tools/virtio/ringtest/noring.c @@ -24,8 +24,9 @@ void *get_buf(unsigned *lenp, void **bufp) return "Buffer"; } -void poll_used(void) +bool used_empty() { + return false; } void disable_call() @@ -54,8 +55,9 @@ bool enable_kick() assert(0); } -void poll_avail(void) +bool avail_empty() { + return false; } bool use_buf(unsigned *lenp, void **bufp) diff --git a/tools/virtio/ringtest/ptr_ring.c b/tools/virtio/ringtest/ptr_ring.c index bd2ad1d3b7a9..635b07b4fdd3 100644 --- a/tools/virtio/ringtest/ptr_ring.c +++ b/tools/virtio/ringtest/ptr_ring.c @@ -133,18 +133,9 @@ void *get_buf(unsigned *lenp, void **bufp) return datap; } -void poll_used(void) +bool used_empty() { - void *b; - - do { - if (tailcnt == headcnt || __ptr_ring_full(&array)) { - b = NULL; - barrier(); - } else { - b = "Buffer\n"; - } - } while (!b); + return (tailcnt == headcnt || __ptr_ring_full(&array)); } void disable_call() @@ -173,14 +164,9 @@ bool enable_kick() assert(0); } -void poll_avail(void) +bool avail_empty() { - void *b; - - do { - barrier(); - b = __ptr_ring_peek(&array); - } while (!b); + return !__ptr_ring_peek(&array); } bool use_buf(unsigned *lenp, void **bufp) diff --git a/tools/virtio/ringtest/ring.c b/tools/virtio/ringtest/ring.c index c25c8d248b6b..747c5dd47be8 100644 --- a/tools/virtio/ringtest/ring.c +++ b/tools/virtio/ringtest/ring.c @@ -163,12 +163,11 @@ void *get_buf(unsigned *lenp, void **bufp) return datap; } -void poll_used(void) +bool used_empty() { unsigned head = (ring_size - 1) & guest.last_used_idx; - while (ring[head].flags & DESC_HW) - busy_wait(); + return (ring[head].flags & DESC_HW); } void disable_call() @@ -180,13 +179,11 @@ void disable_call() bool enable_call() { - unsigned head = (ring_size - 1) & guest.last_used_idx; - event->call_index = guest.last_used_idx; /* Flush call index write */ /* Barrier D (for pairing) */ smp_mb(); - return ring[head].flags & DESC_HW; + return used_empty(); } void kick_available(void) @@ -213,20 +210,17 @@ void disable_kick() bool enable_kick() { - unsigned head = (ring_size - 1) & host.used_idx; - event->kick_index = host.used_idx; /* Barrier C (for pairing) */ smp_mb(); - return !(ring[head].flags & DESC_HW); + return avail_empty(); } -void poll_avail(void) +bool avail_empty() { unsigned head = (ring_size - 1) & host.used_idx; - while (!(ring[head].flags & DESC_HW)) - busy_wait(); + return !(ring[head].flags & DESC_HW); } bool use_buf(unsigned *lenp, void **bufp) diff --git a/tools/virtio/ringtest/virtio_ring_0_9.c b/tools/virtio/ringtest/virtio_ring_0_9.c index 761866212aac..bbc3043b2fb1 100644 --- a/tools/virtio/ringtest/virtio_ring_0_9.c +++ b/tools/virtio/ringtest/virtio_ring_0_9.c @@ -194,24 +194,16 @@ void *get_buf(unsigned *lenp, void **bufp) return datap; } -void poll_used(void) +bool used_empty() { + unsigned short last_used_idx = guest.last_used_idx; #ifdef RING_POLL - unsigned head = (ring_size - 1) & guest.last_used_idx; + unsigned short head = last_used_idx & (ring_size - 1); + unsigned index = ring.used->ring[head].id; - for (;;) { - unsigned index = ring.used->ring[head].id; - - if ((index ^ guest.last_used_idx ^ 0x8000) & ~(ring_size - 1)) - busy_wait(); - else - break; - } + return (index ^ last_used_idx ^ 0x8000) & ~(ring_size - 1); #else - unsigned head = guest.last_used_idx; - - while (ring.used->idx == head) - busy_wait(); + return ring.used->idx == last_used_idx; #endif } @@ -224,22 +216,11 @@ void disable_call() bool enable_call() { - unsigned short last_used_idx; - - vring_used_event(&ring) = (last_used_idx = guest.last_used_idx); + vring_used_event(&ring) = guest.last_used_idx; /* Flush call index write */ /* Barrier D (for pairing) */ smp_mb(); -#ifdef RING_POLL - { - unsigned short head = last_used_idx & (ring_size - 1); - unsigned index = ring.used->ring[head].id; - - return (index ^ last_used_idx ^ 0x8000) & ~(ring_size - 1); - } -#else - return ring.used->idx == last_used_idx; -#endif + return used_empty(); } void kick_available(void) @@ -266,36 +247,21 @@ void disable_kick() bool enable_kick() { - unsigned head = host.used_idx; - - vring_avail_event(&ring) = head; + vring_avail_event(&ring) = host.used_idx; /* Barrier C (for pairing) */ smp_mb(); -#ifdef RING_POLL - { - unsigned index = ring.avail->ring[head & (ring_size - 1)]; - - return (index ^ head ^ 0x8000) & ~(ring_size - 1); - } -#else - return head == ring.avail->idx; -#endif + return avail_empty(); } -void poll_avail(void) +bool avail_empty() { unsigned head = host.used_idx; #ifdef RING_POLL - for (;;) { - unsigned index = ring.avail->ring[head & (ring_size - 1)]; - if ((index ^ head ^ 0x8000) & ~(ring_size - 1)) - busy_wait(); - else - break; - } + unsigned index = ring.avail->ring[head & (ring_size - 1)]; + + return ((index ^ head ^ 0x8000) & ~(ring_size - 1)); #else - while (ring.avail->idx == head) - busy_wait(); + return head == ring.avail->idx; #endif } -- cgit From 948a8ac2964f39161ebf832dea0aa1ced90101bb Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 6 Oct 2016 11:39:12 +0200 Subject: ringtest: poll for new buffers once before updating event index Updating the event index has a memory barrier and causes more work on the other side to actually signal the event. It is unnecessary if a new buffer has already appeared on the ring, so poll once before doing the update. The effect of this on the 0.9 ring implementation is pretty much invisible, but on the new-style ring it provides a consistent 3% performance improvement. Signed-off-by: Paolo Bonzini Signed-off-by: Michael S. Tsirkin --- tools/virtio/ringtest/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/virtio/ringtest/main.c b/tools/virtio/ringtest/main.c index b00ecd619969..f31353fac541 100644 --- a/tools/virtio/ringtest/main.c +++ b/tools/virtio/ringtest/main.c @@ -147,7 +147,7 @@ static void __attribute__((__flatten__)) run_guest(void) assert(completed <= bufs); assert(started <= bufs); if (do_sleep) { - if (enable_call()) + if (used_empty() && enable_call()) wait_for_call(); } else { poll_used(); @@ -172,7 +172,7 @@ static void __attribute__((__flatten__)) run_host(void) for (;;) { if (do_sleep) { - if (enable_kick()) + if (avail_empty() && enable_kick()) wait_for_kick(); } else { poll_avail(); -- cgit From 34563769e438d2881f62cf4d9badc4e589ac0ec0 Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Tue, 11 Oct 2016 12:05:15 +0100 Subject: virtio: console: Unlock vqs while freeing buffers Commit c6017e793b93 ("virtio: console: add locks around buffer removal in port unplug path") added locking around the freeing of buffers in the vq. However, when free_buf() is called with can_sleep = true and rproc is enabled, it calls dma_free_coherent() directly, requiring interrupts to be enabled. Currently a WARNING is triggered due to the spin locking around free_buf, with a call stack like this: WARNING: CPU: 3 PID: 121 at ./include/linux/dma-mapping.h:433 free_buf+0x1a8/0x288 Call Trace: [<8040c538>] show_stack+0x74/0xc0 [<80757240>] dump_stack+0xd0/0x110 [<80430d98>] __warn+0xfc/0x130 [<80430ee0>] warn_slowpath_null+0x2c/0x3c [<807e7c6c>] free_buf+0x1a8/0x288 [<807ea590>] remove_port_data+0x50/0xac [<807ea6a0>] unplug_port+0xb4/0x1bc [<807ea858>] virtcons_remove+0xb0/0xfc [<807b6734>] virtio_dev_remove+0x58/0xc0 [<807f918c>] __device_release_driver+0xac/0x134 [<807f924c>] device_release_driver+0x38/0x50 [<807f7edc>] bus_remove_device+0xfc/0x130 [<807f4b74>] device_del+0x17c/0x21c [<807f4c38>] device_unregister+0x24/0x38 [<807b6b50>] unregister_virtio_device+0x28/0x44 Fix this by restructuring the loops to allow the locks to only be taken where it is necessary to protect the vqs, and release it while the buffer is being freed. Fixes: c6017e793b93 ("virtio: console: add locks around buffer removal in port unplug path") Cc: stable@vger.kernel.org Signed-off-by: Matt Redfearn Signed-off-by: Michael S. Tsirkin --- drivers/char/virtio_console.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index d433b1db1fdd..5649234b7316 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1539,19 +1539,29 @@ static void remove_port_data(struct port *port) spin_lock_irq(&port->inbuf_lock); /* Remove unused data this port might have received. */ discard_port_data(port); + spin_unlock_irq(&port->inbuf_lock); /* Remove buffers we queued up for the Host to send us data in. */ - while ((buf = virtqueue_detach_unused_buf(port->in_vq))) - free_buf(buf, true); - spin_unlock_irq(&port->inbuf_lock); + do { + spin_lock_irq(&port->inbuf_lock); + buf = virtqueue_detach_unused_buf(port->in_vq); + spin_unlock_irq(&port->inbuf_lock); + if (buf) + free_buf(buf, true); + } while (buf); spin_lock_irq(&port->outvq_lock); reclaim_consumed_buffers(port); + spin_unlock_irq(&port->outvq_lock); /* Free pending buffers from the out-queue. */ - while ((buf = virtqueue_detach_unused_buf(port->out_vq))) - free_buf(buf, true); - spin_unlock_irq(&port->outvq_lock); + do { + spin_lock_irq(&port->outvq_lock); + buf = virtqueue_detach_unused_buf(port->out_vq); + spin_unlock_irq(&port->outvq_lock); + if (buf) + free_buf(buf, true); + } while (buf); } /* -- cgit From 3dae2c6152fbbc6224343551158b61aad585cedf Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Tue, 11 Oct 2016 11:02:14 +0200 Subject: virtio: remove config.c Remove unused file config.c Signed-off-by: Juergen Gross Signed-off-by: Michael S. Tsirkin --- drivers/virtio/config.c | 12 ------------ 1 file changed, 12 deletions(-) delete mode 100644 drivers/virtio/config.c diff --git a/drivers/virtio/config.c b/drivers/virtio/config.c deleted file mode 100644 index f70bcd2ff98f..000000000000 --- a/drivers/virtio/config.c +++ /dev/null @@ -1,12 +0,0 @@ -/* Configuration space parsing helpers for virtio. - * - * The configuration is [type][len][... len bytes ...] fields. - * - * Copyright 2007 Rusty Russell, IBM Corporation. - * GPL v2 or later. - */ -#include -#include -#include -#include - -- cgit From 668866b6e8dffa5583d8694f1d8ddd89a8bee745 Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Tue, 13 Sep 2016 11:32:22 +0200 Subject: virtio_blk: Use kmalloc_array() in init_vq() Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Michael S. Tsirkin --- drivers/block/virtio_blk.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 2dc5c96c186a..b2bc62b9fbe6 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -390,13 +390,13 @@ static int init_vq(struct virtio_blk *vblk) if (err) num_vqs = 1; - vblk->vqs = kmalloc(sizeof(*vblk->vqs) * num_vqs, GFP_KERNEL); + vblk->vqs = kmalloc_array(num_vqs, sizeof(*vblk->vqs), GFP_KERNEL); if (!vblk->vqs) return -ENOMEM; - names = kmalloc(sizeof(*names) * num_vqs, GFP_KERNEL); - callbacks = kmalloc(sizeof(*callbacks) * num_vqs, GFP_KERNEL); - vqs = kmalloc(sizeof(*vqs) * num_vqs, GFP_KERNEL); + names = kmalloc_array(num_vqs, sizeof(*names), GFP_KERNEL); + callbacks = kmalloc_array(num_vqs, sizeof(*callbacks), GFP_KERNEL); + vqs = kmalloc_array(num_vqs, sizeof(*vqs), GFP_KERNEL); if (!names || !callbacks || !vqs) { err = -ENOMEM; goto out; -- cgit From 2ff98449ee883d6e7484f5937370df42d6789e07 Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Tue, 13 Sep 2016 13:43:50 +0200 Subject: virtio_blk: Delete an unnecessary initialisation in init_vq() The local variable "err" will be set to an appropriate value by a following statement. Thus omit the explicit initialisation at the beginning. Signed-off-by: Markus Elfring Signed-off-by: Michael S. Tsirkin --- drivers/block/virtio_blk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index b2bc62b9fbe6..5545a679abd8 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -376,7 +376,7 @@ static void virtblk_config_changed(struct virtio_device *vdev) static int init_vq(struct virtio_blk *vblk) { - int err = 0; + int err; int i; vq_callback_t **callbacks; const char **names; -- cgit From 678ff27d25c62e3a25fa069914182a8a6391e121 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 14 Aug 2016 20:57:14 +0300 Subject: virtio/vhost: add Jason to list of maintainers Jason's been one of the mst active contributors to virtio and vhost, it will help to formalize this and list him as co-maintainer. Signed-off-by: Michael S. Tsirkin --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 3d838cf49f81..eee287e0b740 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12780,6 +12780,7 @@ F: include/uapi/linux/virtio_console.h VIRTIO CORE, NET AND BLOCK DRIVERS M: "Michael S. Tsirkin" +M: Jason Wang L: virtualization@lists.linux-foundation.org S: Maintained F: Documentation/devicetree/bindings/virtio/ @@ -12810,6 +12811,7 @@ F: include/uapi/linux/virtio_gpu.h VIRTIO HOST (VHOST) M: "Michael S. Tsirkin" +M: Jason Wang L: kvm@vger.kernel.org L: virtualization@lists.linux-foundation.org L: netdev@vger.kernel.org -- cgit From 75bfa81bf0897ba87f1e1b9b576a07536029b86a Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 31 Oct 2016 00:38:21 +0200 Subject: virtio_ring: mark vring_dma_dev inline This inline function is unused on configurations where dma_map/unmap are empty macros. Make the function inline to avoid gcc errors because of an unused static function. Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio_ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index 6b2cd922d322..489bfc61cf30 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -167,7 +167,7 @@ static bool vring_use_dma_api(struct virtio_device *vdev) * making all of the arch DMA ops work on the vring device itself * is a mess. For now, we use the parent device for DMA ops. */ -static struct device *vring_dma_dev(const struct vring_virtqueue *vq) +static inline struct device *vring_dma_dev(const struct vring_virtqueue *vq) { return vq->vq.vdev->dev.parent; } -- cgit From b9a321b48af40e0606009df8aff0a8c65dfbbfd8 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Sun, 30 Oct 2016 19:28:27 -0400 Subject: r8152: Fix broken RX checksums. The r8152 driver has been broken since (approx) 3.16.xx when support was added for hardware RX checksums on newer chip versions. Symptoms include random segfaults and silent data corruption over NFS. The hardware checksum logig does not work on the VER_02 dongles I have here when used with a slow embedded system CPU. Google reveals others reporting similar issues on Raspberry Pi. So, disable hardware RX checksum support for VER_02, and fix an obvious coding error for IPV6 checksums in the same function. Because this bug results in silent data corruption, it is a good candidate for back-porting to -stable >= 3.16.xx. Signed-off-by: Mark Lord Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 44d439f50961..75c516889645 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -1730,7 +1730,7 @@ static u8 r8152_rx_csum(struct r8152 *tp, struct rx_desc *rx_desc) u8 checksum = CHECKSUM_NONE; u32 opts2, opts3; - if (tp->version == RTL_VER_01) + if (tp->version == RTL_VER_01 || tp->version == RTL_VER_02) goto return_result; opts2 = le32_to_cpu(rx_desc->opts2); @@ -1745,7 +1745,7 @@ static u8 r8152_rx_csum(struct r8152 *tp, struct rx_desc *rx_desc) checksum = CHECKSUM_NONE; else checksum = CHECKSUM_UNNECESSARY; - } else if (RD_IPV6_CS) { + } else if (opts2 & RD_IPV6_CS) { if ((opts2 & RD_UDP_CS) && !(opts3 & UDPF)) checksum = CHECKSUM_UNNECESSARY; else if ((opts2 & RD_TCP_CS) && !(opts3 & TCPF)) -- cgit From 9b9d7cdd0a20a8c26a022604580f93516ad69c36 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Fri, 21 Oct 2016 16:21:07 +0530 Subject: usb: dwc3: Fix error handling for core init Fixing the sequence of events in dwc3_core_init() error exit path. dwc3_core_exit() call is also removed from the error path since, whatever it's doing is already done. Fixes: c499ff7 usb: dwc3: core: re-factor init and exit paths Cc: Felipe Balbi Cc: Greg KH Cc: Stable # 4.8+ Signed-off-by: Vivek Gautam Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 7287a763cd0c..fea446900cad 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -769,15 +769,14 @@ static int dwc3_core_init(struct dwc3 *dwc) return 0; err4: - phy_power_off(dwc->usb2_generic_phy); + phy_power_off(dwc->usb3_generic_phy); err3: - phy_power_off(dwc->usb3_generic_phy); + phy_power_off(dwc->usb2_generic_phy); err2: usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); - dwc3_core_exit(dwc); err1: usb_phy_shutdown(dwc->usb2_phy); -- cgit From 4accb8a1ee7d82f02bcbacba0e50995c531918d4 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 21 Oct 2016 15:23:59 +0300 Subject: usb: dwc3: st: add missing include dwc3-st uses pinctrl_pm_select_*_state() however it doesn't include the necessary header. Fix the build break caused by that, by simply including the missing header. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-st.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index 89a2f712fdfe..aaaf256f71dd 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include "core.h" -- cgit From c17c3cdff10b9f59ef1244a14604f10949f17117 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sat, 29 Oct 2016 22:03:05 +0800 Subject: netfilter: nf_tables: destroy the set if fail to add transaction When the memory is exhausted, then we will fail to add the NFT_MSG_NEWSET transaction. In such case, we should destroy the set before we free it. Fixes: 958bee14d071 ("netfilter: nf_tables: use new transaction infrastructure to handle sets") Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 365d31b86816..7d6a626b08f1 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2956,12 +2956,14 @@ static int nf_tables_newset(struct net *net, struct sock *nlsk, err = nft_trans_set_add(&ctx, NFT_MSG_NEWSET, set); if (err < 0) - goto err2; + goto err3; list_add_tail_rcu(&set->list, &table->sets); table->use++; return 0; +err3: + ops->destroy(set); err2: kfree(set); err1: -- cgit From b73b8a1ba598236296a46103d81c10d629d9a470 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sat, 29 Oct 2016 22:09:51 +0800 Subject: netfilter: nft_dup: do not use sreg_dev if the user doesn't specify it The NFTA_DUP_SREG_DEV attribute is not a must option, so we should use it in routing lookup only when the user specify it. Fixes: d877f07112f1 ("netfilter: nf_tables: add nft_dup expression") Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/nft_dup_ipv4.c | 6 ++++-- net/ipv6/netfilter/nft_dup_ipv6.c | 6 ++++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/net/ipv4/netfilter/nft_dup_ipv4.c b/net/ipv4/netfilter/nft_dup_ipv4.c index bf855e64fc45..0c01a270bf9f 100644 --- a/net/ipv4/netfilter/nft_dup_ipv4.c +++ b/net/ipv4/netfilter/nft_dup_ipv4.c @@ -28,7 +28,7 @@ static void nft_dup_ipv4_eval(const struct nft_expr *expr, struct in_addr gw = { .s_addr = (__force __be32)regs->data[priv->sreg_addr], }; - int oif = regs->data[priv->sreg_dev]; + int oif = priv->sreg_dev ? regs->data[priv->sreg_dev] : -1; nf_dup_ipv4(pkt->net, pkt->skb, pkt->hook, &gw, oif); } @@ -59,7 +59,9 @@ static int nft_dup_ipv4_dump(struct sk_buff *skb, const struct nft_expr *expr) { struct nft_dup_ipv4 *priv = nft_expr_priv(expr); - if (nft_dump_register(skb, NFTA_DUP_SREG_ADDR, priv->sreg_addr) || + if (nft_dump_register(skb, NFTA_DUP_SREG_ADDR, priv->sreg_addr)) + goto nla_put_failure; + if (priv->sreg_dev && nft_dump_register(skb, NFTA_DUP_SREG_DEV, priv->sreg_dev)) goto nla_put_failure; diff --git a/net/ipv6/netfilter/nft_dup_ipv6.c b/net/ipv6/netfilter/nft_dup_ipv6.c index 8bfd470cbe72..831f86e1ec08 100644 --- a/net/ipv6/netfilter/nft_dup_ipv6.c +++ b/net/ipv6/netfilter/nft_dup_ipv6.c @@ -26,7 +26,7 @@ static void nft_dup_ipv6_eval(const struct nft_expr *expr, { struct nft_dup_ipv6 *priv = nft_expr_priv(expr); struct in6_addr *gw = (struct in6_addr *)®s->data[priv->sreg_addr]; - int oif = regs->data[priv->sreg_dev]; + int oif = priv->sreg_dev ? regs->data[priv->sreg_dev] : -1; nf_dup_ipv6(pkt->net, pkt->skb, pkt->hook, gw, oif); } @@ -57,7 +57,9 @@ static int nft_dup_ipv6_dump(struct sk_buff *skb, const struct nft_expr *expr) { struct nft_dup_ipv6 *priv = nft_expr_priv(expr); - if (nft_dump_register(skb, NFTA_DUP_SREG_ADDR, priv->sreg_addr) || + if (nft_dump_register(skb, NFTA_DUP_SREG_ADDR, priv->sreg_addr)) + goto nla_put_failure; + if (priv->sreg_dev && nft_dump_register(skb, NFTA_DUP_SREG_DEV, priv->sreg_dev)) goto nla_put_failure; -- cgit From fd3220d37b1f6f0cab6142d98b0e6c4082e63299 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 31 Oct 2016 14:42:14 +0100 Subject: ovl: update S_ISGID when setting posix ACLs This change fixes xfstest generic/375, which failed to clear the setgid bit in the following test case on overlayfs: touch $testfile chown 100:100 $testfile chmod 2755 $testfile _runas -u 100 -g 101 -- setfacl -m u::rwx,g::rwx,o::rwx $testfile Reported-by: Amir Goldstein Signed-off-by: Miklos Szeredi Tested-by: Amir Goldstein Fixes: d837a49bd57f ("ovl: fix POSIX ACL setting") Cc: # v4.8 --- fs/overlayfs/super.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c index bcf3965be819..edd46a0e951d 100644 --- a/fs/overlayfs/super.c +++ b/fs/overlayfs/super.c @@ -1037,6 +1037,21 @@ ovl_posix_acl_xattr_set(const struct xattr_handler *handler, posix_acl_release(acl); + /* + * Check if sgid bit needs to be cleared (actual setacl operation will + * be done with mounter's capabilities and so that won't do it for us). + */ + if (unlikely(inode->i_mode & S_ISGID) && + handler->flags == ACL_TYPE_ACCESS && + !in_group_p(inode->i_gid) && + !capable_wrt_inode_uidgid(inode, CAP_FSETID)) { + struct iattr iattr = { .ia_valid = ATTR_KILL_SGID }; + + err = ovl_setattr(dentry, &iattr); + if (err) + return err; + } + err = ovl_xattr_set(dentry, handler->name, value, size, flags); if (!err) ovl_copyattr(ovl_inode_real(inode, NULL), inode); -- cgit From b93d4a0eb308d4400b84c8b24c1b80e09a9497d0 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 31 Oct 2016 14:42:14 +0100 Subject: ovl: fix get_acl() on tmpfs tmpfs doesn't have ->get_acl() because it only uses cached acls. This fixes the acl tests in pjdfstest when tmpfs is used as the upper layer of the overlay. Reported-by: Amir Goldstein Signed-off-by: Miklos Szeredi Fixes: 39a25b2b3762 ("ovl: define ->get_acl() for overlay inodes") Cc: # v4.8 --- fs/overlayfs/inode.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c index c58f01babf30..7fb53d055537 100644 --- a/fs/overlayfs/inode.c +++ b/fs/overlayfs/inode.c @@ -270,9 +270,6 @@ struct posix_acl *ovl_get_acl(struct inode *inode, int type) if (!IS_ENABLED(CONFIG_FS_POSIX_ACL) || !IS_POSIXACL(realinode)) return NULL; - if (!realinode->i_op->get_acl) - return NULL; - old_cred = ovl_override_creds(inode->i_sb); acl = get_acl(realinode, type); revert_creds(old_cred); -- cgit From 641089c1549d8d3df0b047b5de7e9a111362cdce Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 31 Oct 2016 14:42:14 +0100 Subject: ovl: fsync after copy-up Make sure the copied up file hits the disk before renaming to the final destination. If this is not done then the copy-up may corrupt the data in the file in case of a crash. Signed-off-by: Miklos Szeredi Cc: --- fs/overlayfs/copy_up.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c index aeb60f791418..36795eed40b0 100644 --- a/fs/overlayfs/copy_up.c +++ b/fs/overlayfs/copy_up.c @@ -178,6 +178,8 @@ static int ovl_copy_up_data(struct path *old, struct path *new, loff_t len) len -= bytes; } + if (!error) + error = vfs_fsync(new_file, 0); fput(new_file); out_fput: fput(old_file); -- cgit From c5f0627488be996e833038bdba01e45698ddaa26 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 11 Oct 2016 13:41:02 -0500 Subject: driver core: skip removal test for non-removable drivers Some drivers do not support removal/unbinding. These drivers should have drv->suppress_bind_attrs set to true, so use that to skip the removal test. This doesn't fix anything reported so far, but should prevent some other cases. Some drivers will need fixes to set suppress_bind_attrs to avoid this test. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=177021 Fixes: bea5b158ff0d ("driver core: add test of driver remove calls during probe") Reported-by: Laszlo Ersek Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- drivers/base/dd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/base/dd.c b/drivers/base/dd.c index d22a7260f42b..8937a7ad7165 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -324,7 +324,8 @@ static int really_probe(struct device *dev, struct device_driver *drv) { int ret = -EPROBE_DEFER; int local_trigger_count = atomic_read(&deferred_trigger_count); - bool test_remove = IS_ENABLED(CONFIG_DEBUG_TEST_DRIVER_REMOVE); + bool test_remove = IS_ENABLED(CONFIG_DEBUG_TEST_DRIVER_REMOVE) && + !drv->suppress_bind_attrs; if (defer_all_probes) { /* -- cgit From bdacd1b426db83ac8ecf21aef1848120ffe53c07 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 11 Oct 2016 13:41:03 -0500 Subject: driver core: fix smatch warning on dev->bus check Commit d42a09802174 (driver core: skip removal test for non-removable drivers) introduced a smatch warning: drivers/base/dd.c:386 really_probe() warn: variable dereferenced before check 'dev->bus' (see line 373) Fix the warning by removing the dev->bus NULL check. dev->bus will never be NULL, so the check was unnecessary. Reported-by: Dan Carpenter Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- drivers/base/dd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 8937a7ad7165..d76cd97a98b6 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -384,7 +384,7 @@ re_probe: if (test_remove) { test_remove = false; - if (dev->bus && dev->bus->remove) + if (dev->bus->remove) dev->bus->remove(dev); else if (drv->remove) drv->remove(dev); -- cgit From befd99656c5eb765fe9d96045c4cba099fd938db Mon Sep 17 00:00:00 2001 From: Jarkko Sakkinen Date: Tue, 4 Oct 2016 09:49:47 +0300 Subject: tpm: remove invalid min length check from tpm_do_selftest() Removal of this check was not properly amended to the original commit. Cc: stable@vger.kernel.org Fixes: 0c541332231e ("tpm: use tpm_pcr_read_dev() in tpm_do_selftest()") Signed-off-by: Jarkko Sakkinen Signed-off-by: James Morris --- drivers/char/tpm/tpm-interface.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c index 8de61876f633..3a9149cf0110 100644 --- a/drivers/char/tpm/tpm-interface.c +++ b/drivers/char/tpm/tpm-interface.c @@ -813,9 +813,6 @@ int tpm_do_selftest(struct tpm_chip *chip) continue; } - if (rc < TPM_HEADER_SIZE) - return -EFAULT; - if (rc == TPM_ERR_DISABLED || rc == TPM_ERR_DEACTIVATED) { dev_info(&chip->dev, "TPM is disabled/deactivated (0x%X)\n", rc); -- cgit From 85915b63ad8b796848f431b66c9ba5e356e722e5 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 31 Oct 2016 14:42:09 +0800 Subject: ASoC: sun4i-codec: return error code instead of NULL when create_card fails When sun4i_codec_create_card fails, we do not assign a proper error code to the return value. The return value would be 0 from the previous function call, or we would have bailed out sooner. This would confuse the driver core into thinking the device probe succeeded, when in fact it didn't, leaving various devres based resources lingering. Make the create_card function pass back a meaningful error code, and assign it to the return value. Fixes: 45fb6b6f2aa3 ("ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs") Signed-off-by: Chen-Yu Tsai Signed-off-by: Mark Brown --- sound/soc/sunxi/sun4i-codec.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c index e047ec06d538..a60707761abf 100644 --- a/sound/soc/sunxi/sun4i-codec.c +++ b/sound/soc/sunxi/sun4i-codec.c @@ -765,11 +765,11 @@ static struct snd_soc_card *sun4i_codec_create_card(struct device *dev) card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL); if (!card) - return NULL; + return ERR_PTR(-ENOMEM); card->dai_link = sun4i_codec_create_link(dev, &card->num_links); if (!card->dai_link) - return NULL; + return ERR_PTR(-ENOMEM); card->dev = dev; card->name = "sun4i-codec"; @@ -876,7 +876,8 @@ static int sun4i_codec_probe(struct platform_device *pdev) } card = sun4i_codec_create_card(&pdev->dev); - if (!card) { + if (IS_ERR(card)) { + ret = PTR_ERR(card); dev_err(&pdev->dev, "Failed to create our card\n"); goto err_unregister_codec; } -- cgit From 066f1f0b4719eb4573ef09bfc63c2bbb6f7676ca Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Oct 2016 10:41:49 -0400 Subject: drm/radeon: disable runtime pm in certain cases MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the platform does not support hybrid graphics or ATPX dGPU power control. bug: https://bugzilla.kernel.org/show_bug.cgi?id=51381 Acked-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_device.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index eb92aef46e3c..621af069a3d2 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -104,6 +104,14 @@ static const char radeon_family_name[][16] = { "LAST", }; +#if defined(CONFIG_VGA_SWITCHEROO) +bool radeon_has_atpx_dgpu_power_cntl(void); +bool radeon_is_atpx_hybrid(void); +#else +static inline bool radeon_has_atpx_dgpu_power_cntl(void) { return false; } +static inline bool radeon_is_atpx_hybrid(void) { return false; } +#endif + #define RADEON_PX_QUIRK_DISABLE_PX (1 << 0) #define RADEON_PX_QUIRK_LONG_WAKEUP (1 << 1) @@ -160,6 +168,11 @@ static void radeon_device_handle_px_quirks(struct radeon_device *rdev) if (rdev->px_quirk_flags & RADEON_PX_QUIRK_DISABLE_PX) rdev->flags &= ~RADEON_IS_PX; + + /* disable PX is the system doesn't support dGPU power control or hybrid gfx */ + if (!radeon_is_atpx_hybrid() && + !radeon_has_atpx_dgpu_power_cntl()) + rdev->flags &= ~RADEON_IS_PX; } /** -- cgit From 84b1528e8cef55274f0df20e93513b3060ce495a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Oct 2016 11:02:31 -0400 Subject: drm/amdgpu: disable runtime pm in certain cases MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the platform does not support hybrid graphics or ATPX dGPU power control. Acked-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index 203d98b00555..3938fca1ea8e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -99,6 +99,8 @@ int amdgpu_driver_load_kms(struct drm_device *dev, unsigned long flags) if ((amdgpu_runtime_pm != 0) && amdgpu_has_atpx() && + (amdgpu_is_atpx_hybrid() || + amdgpu_has_atpx_dgpu_power_cntl()) && ((flags & AMD_IS_APU) == 0)) flags |= AMD_IS_PX; -- cgit From 0a6e21056eaa859353945c4b164f3ef574d84271 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 31 Oct 2016 12:19:39 -0400 Subject: drm/radeon: Fix kernel panic on shutdown Since commit a481daa88fd4 ("drm/radeon: always apply pci shutdown callbacks"), a Dell Latitude D600 laptop has crashed on shutdown. The PCI Identification of the graphics adapter is "VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV250/M9 GL [Mobility FireGL 9000/Radeon 9000] [1002:4c66] (rev 01)". Prior to commit b0c80bd5d2e3 ("drm/radeon: fix up dp aux tear down (v2)"), I have no idea where the panic happened as the screen was blanked before the crash. Since that more recent change, the panic has been in routine radeon_connector_unregister(), and has been shown to be due to a NULL value in the ddc_bus member of struct drm_connector. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=178421 Fixes: a481daa88fd4 ("drm/radeon: always apply pci shutdown callbacks") Signed-off-by: Larry Finger Cc: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_connectors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index e18839d52e3e..27affbde058c 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -931,7 +931,7 @@ static void radeon_connector_unregister(struct drm_connector *connector) { struct radeon_connector *radeon_connector = to_radeon_connector(connector); - if (radeon_connector->ddc_bus->has_aux) { + if (radeon_connector->ddc_bus && radeon_connector->ddc_bus->has_aux) { drm_dp_aux_unregister(&radeon_connector->ddc_bus->aux); radeon_connector->ddc_bus->has_aux = false; } -- cgit From 582ab27a063a506ccb55fc48afcc325342a2deba Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Mon, 31 Oct 2016 19:02:39 +0200 Subject: mei: bus: fix received data size check in NFC fixup NFC version reply size checked against only header size, not against full message size. That may lead potentially to uninitialized memory access in version data. That leads to warnings when version data is accessed: drivers/misc/mei/bus-fixup.c: warning: '*((void *)&ver+11)' may be used uninitialized in this function [-Wuninitialized]: => 212:2 Reported in Build regressions/improvements in v4.9-rc3 https://lkml.org/lkml/2016/10/30/57 Fixes: 59fcd7c63abf (mei: nfc: Initial nfc implementation) Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus-fixup.c | 2 +- drivers/nfc/mei_phy.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index e9e6ea3ab73c..75b9d4ac8b1e 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -178,7 +178,7 @@ static int mei_nfc_if_version(struct mei_cl *cl, ret = 0; bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length); - if (bytes_recv < 0 || bytes_recv < sizeof(struct mei_nfc_reply)) { + if (bytes_recv < if_version_length) { dev_err(bus->dev, "Could not read IF version\n"); ret = -EIO; goto err; diff --git a/drivers/nfc/mei_phy.c b/drivers/nfc/mei_phy.c index 83deda4bb4d6..6f9563a96488 100644 --- a/drivers/nfc/mei_phy.c +++ b/drivers/nfc/mei_phy.c @@ -133,7 +133,7 @@ static int mei_nfc_if_version(struct nfc_mei_phy *phy) return -ENOMEM; bytes_recv = mei_cldev_recv(phy->cldev, (u8 *)reply, if_version_length); - if (bytes_recv < 0 || bytes_recv < sizeof(struct mei_nfc_reply)) { + if (bytes_recv < 0 || bytes_recv < if_version_length) { pr_err("Could not read IF version\n"); r = -EIO; goto err; -- cgit From eef2b41122425dbddd16d70371bd000f601161d6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Oct 2016 12:27:52 -0400 Subject: drm/amdgpu: make sure ddc_bus is valid in connector unregister This should only happen on boards TV connectors which do not have a ddc bus for those connectors. None of the asics supported by amdgpu support tv, so we shouldn't hit this, but check to be on the safe side (e.g., bios bug for example). Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c index e3281d4e3e41..086aa5c9c634 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c @@ -769,7 +769,7 @@ static void amdgpu_connector_unregister(struct drm_connector *connector) { struct amdgpu_connector *amdgpu_connector = to_amdgpu_connector(connector); - if (amdgpu_connector->ddc_bus->has_aux) { + if (amdgpu_connector->ddc_bus && amdgpu_connector->ddc_bus->has_aux) { drm_dp_aux_unregister(&amdgpu_connector->ddc_bus->aux); amdgpu_connector->ddc_bus->has_aux = false; } -- cgit From 91efdb2718e0c5ff014f0cf98cac99f088a9a4d2 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sat, 29 Oct 2016 23:32:44 +0300 Subject: drm/amd/powerplay: don't succeed in getters if fan is missing Otherwise callers end up using uninitialized data. Reviewed-by: Edward O'Callaghan Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c index fb6c6f6106d5..29d0319b22e6 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c @@ -30,7 +30,7 @@ int smu7_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr, struct phm_fan_speed_info *fan_speed_info) { if (hwmgr->thermal_controller.fanInfo.bNoFan) - return 0; + return -ENODEV; fan_speed_info->supports_percent_read = true; fan_speed_info->supports_percent_write = true; @@ -60,7 +60,7 @@ int smu7_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr, uint64_t tmp64; if (hwmgr->thermal_controller.fanInfo.bNoFan) - return 0; + return -ENODEV; duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL1, FMAX_DUTY100); @@ -89,7 +89,7 @@ int smu7_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed) if (hwmgr->thermal_controller.fanInfo.bNoFan || (hwmgr->thermal_controller.fanInfo. ucTachometerPulsesPerRevolution == 0)) - return 0; + return -ENODEV; tach_period = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_TACH_STATUS, TACH_PERIOD); -- cgit From c24784f01549ecdf23fc00d0588423bcf8956714 Mon Sep 17 00:00:00 2001 From: Christian König Date: Fri, 28 Oct 2016 17:04:07 +0200 Subject: drm/amd: fix scheduler fence teardown order v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some fences might be alive even after we have stopped the scheduler leading to warnings about leaked objects from the SLUB allocator. Fix this by allocating/freeing the SLUB allocator from the module init/fini functions just like we do it for hw fences. v2: make variable static, add link to bug Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=97500 Reported-by: Grazvydas Ignotas Signed-off-by: Christian König Reviewed-by: Alex Deucher (v1) Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 2 ++ drivers/gpu/drm/amd/scheduler/gpu_scheduler.c | 13 ------------- drivers/gpu/drm/amd/scheduler/gpu_scheduler.h | 6 +++--- drivers/gpu/drm/amd/scheduler/sched_fence.c | 19 +++++++++++++++++++ 4 files changed, 24 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 71ed27eb3dde..73f2415630f8 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -737,6 +737,7 @@ static int __init amdgpu_init(void) { amdgpu_sync_init(); amdgpu_fence_slab_init(); + amd_sched_fence_slab_init(); if (vgacon_text_force()) { DRM_ERROR("VGACON disables amdgpu kernel modesetting.\n"); return -EINVAL; @@ -756,6 +757,7 @@ static void __exit amdgpu_exit(void) drm_pci_exit(driver, pdriver); amdgpu_unregister_atpx_handler(); amdgpu_sync_fini(); + amd_sched_fence_slab_fini(); amdgpu_fence_slab_fini(); } diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c index 910b8d5b21c5..ffe1f85ce300 100644 --- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c +++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c @@ -34,9 +34,6 @@ static bool amd_sched_entity_is_ready(struct amd_sched_entity *entity); static void amd_sched_wakeup(struct amd_gpu_scheduler *sched); static void amd_sched_process_job(struct fence *f, struct fence_cb *cb); -struct kmem_cache *sched_fence_slab; -atomic_t sched_fence_slab_ref = ATOMIC_INIT(0); - /* Initialize a given run queue struct */ static void amd_sched_rq_init(struct amd_sched_rq *rq) { @@ -618,13 +615,6 @@ int amd_sched_init(struct amd_gpu_scheduler *sched, INIT_LIST_HEAD(&sched->ring_mirror_list); spin_lock_init(&sched->job_list_lock); atomic_set(&sched->hw_rq_count, 0); - if (atomic_inc_return(&sched_fence_slab_ref) == 1) { - sched_fence_slab = kmem_cache_create( - "amd_sched_fence", sizeof(struct amd_sched_fence), 0, - SLAB_HWCACHE_ALIGN, NULL); - if (!sched_fence_slab) - return -ENOMEM; - } /* Each scheduler will run on a seperate kernel thread */ sched->thread = kthread_run(amd_sched_main, sched, sched->name); @@ -645,7 +635,4 @@ void amd_sched_fini(struct amd_gpu_scheduler *sched) { if (sched->thread) kthread_stop(sched->thread); - rcu_barrier(); - if (atomic_dec_and_test(&sched_fence_slab_ref)) - kmem_cache_destroy(sched_fence_slab); } diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h index 7cbbbfb502ef..51068e6c3d9a 100644 --- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h +++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h @@ -30,9 +30,6 @@ struct amd_gpu_scheduler; struct amd_sched_rq; -extern struct kmem_cache *sched_fence_slab; -extern atomic_t sched_fence_slab_ref; - /** * A scheduler entity is a wrapper around a job queue or a group * of other entities. Entities take turns emitting jobs from their @@ -145,6 +142,9 @@ void amd_sched_entity_fini(struct amd_gpu_scheduler *sched, struct amd_sched_entity *entity); void amd_sched_entity_push_job(struct amd_sched_job *sched_job); +int amd_sched_fence_slab_init(void); +void amd_sched_fence_slab_fini(void); + struct amd_sched_fence *amd_sched_fence_create( struct amd_sched_entity *s_entity, void *owner); void amd_sched_fence_scheduled(struct amd_sched_fence *fence); diff --git a/drivers/gpu/drm/amd/scheduler/sched_fence.c b/drivers/gpu/drm/amd/scheduler/sched_fence.c index 3653b5a40494..88fc2d662579 100644 --- a/drivers/gpu/drm/amd/scheduler/sched_fence.c +++ b/drivers/gpu/drm/amd/scheduler/sched_fence.c @@ -27,6 +27,25 @@ #include #include "gpu_scheduler.h" +static struct kmem_cache *sched_fence_slab; + +int amd_sched_fence_slab_init(void) +{ + sched_fence_slab = kmem_cache_create( + "amd_sched_fence", sizeof(struct amd_sched_fence), 0, + SLAB_HWCACHE_ALIGN, NULL); + if (!sched_fence_slab) + return -ENOMEM; + + return 0; +} + +void amd_sched_fence_slab_fini(void) +{ + rcu_barrier(); + kmem_cache_destroy(sched_fence_slab); +} + struct amd_sched_fence *amd_sched_fence_create(struct amd_sched_entity *entity, void *owner) { -- cgit From 245ae5e915853ced749eb47a343749cf0a9c4109 Mon Sep 17 00:00:00 2001 From: Christian König Date: Fri, 28 Oct 2016 17:39:08 +0200 Subject: drm/amdgpu: add some error handling to amdgpu_init v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Just to be clean should we ever run into -ENOMEM during module init. v2: fix typo in commit message Signed-off-by: Christian König Reviewed-by: Alex Deucher (v1) Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 73f2415630f8..02ff0747197c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -735,9 +735,20 @@ static struct pci_driver amdgpu_kms_pci_driver = { static int __init amdgpu_init(void) { - amdgpu_sync_init(); - amdgpu_fence_slab_init(); - amd_sched_fence_slab_init(); + int r; + + r = amdgpu_sync_init(); + if (r) + goto error_sync; + + r = amdgpu_fence_slab_init(); + if (r) + goto error_fence; + + r = amd_sched_fence_slab_init(); + if (r) + goto error_sched; + if (vgacon_text_force()) { DRM_ERROR("VGACON disables amdgpu kernel modesetting.\n"); return -EINVAL; @@ -749,6 +760,15 @@ static int __init amdgpu_init(void) amdgpu_register_atpx_handler(); /* let modprobe override vga console setting */ return drm_pci_init(driver, pdriver); + +error_sched: + amdgpu_fence_slab_fini(); + +error_fence: + amdgpu_sync_fini(); + +error_sync: + return r; } static void __exit amdgpu_exit(void) -- cgit From f89c56ce710afa65e1b2ead555b52c4807f34ff7 Mon Sep 17 00:00:00 2001 From: Jakub Sitnicki Date: Wed, 26 Oct 2016 11:21:14 +0200 Subject: ipv6: Don't use ufo handling on later transformed packets Similar to commit c146066ab802 ("ipv4: Don't use ufo handling on later transformed packets"), don't perform UFO on packets that will be IPsec transformed. To detect it we rely on the fact that headerlen in dst_entry is non-zero only for transformation bundles (xfrm_dst objects). Unwanted segmentation can be observed with a NETIF_F_UFO capable device, such as a dummy device: DEV=dum0 LEN=1493 ip li add $DEV type dummy ip addr add fc00::1/64 dev $DEV nodad ip link set $DEV up ip xfrm policy add dir out src fc00::1 dst fc00::2 \ tmpl src fc00::1 dst fc00::2 proto esp spi 1 ip xfrm state add src fc00::1 dst fc00::2 \ proto esp spi 1 enc 'aes' 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b tcpdump -n -nn -i $DEV -t & socat /dev/zero,readbytes=$LEN udp6:[fc00::2]:$LEN tcpdump output before: IP6 fc00::1 > fc00::2: frag (0|1448) ESP(spi=0x00000001,seq=0x1), length 1448 IP6 fc00::1 > fc00::2: frag (1448|48) IP6 fc00::1 > fc00::2: ESP(spi=0x00000001,seq=0x2), length 88 ... and after: IP6 fc00::1 > fc00::2: frag (0|1448) ESP(spi=0x00000001,seq=0x1), length 1448 IP6 fc00::1 > fc00::2: frag (1448|80) Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach") Signed-off-by: Jakub Sitnicki Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 6001e781164e..59eb4ed99ce8 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1366,7 +1366,7 @@ emsgsize: if (((length > mtu) || (skb && skb_is_gso(skb))) && (sk->sk_protocol == IPPROTO_UDP) && - (rt->dst.dev->features & NETIF_F_UFO) && + (rt->dst.dev->features & NETIF_F_UFO) && !rt->dst.header_len && (sk->sk_type == SOCK_DGRAM) && !udp_get_no_check6_tx(sk)) { err = ip6_ufo_append_data(sk, queue, getfrag, from, length, hh_len, fragheaderlen, exthdrlen, -- cgit From da7389ac6c83e7aa8b04ebe5ba546df2a7873c5c Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Mon, 31 Oct 2016 10:40:13 -0700 Subject: gcc-plugins: Export symbols needed by gcc This explicitly exports symbols that gcc expects from plugins. Based on code from Emese Revfy. Signed-off-by: Kees Cook --- scripts/gcc-plugins/cyc_complexity_plugin.c | 4 ++-- scripts/gcc-plugins/gcc-common.h | 1 + scripts/gcc-plugins/latent_entropy_plugin.c | 6 +++--- scripts/gcc-plugins/sancov_plugin.c | 4 ++-- 4 files changed, 8 insertions(+), 7 deletions(-) diff --git a/scripts/gcc-plugins/cyc_complexity_plugin.c b/scripts/gcc-plugins/cyc_complexity_plugin.c index 34df974c6ba3..8af7db06122d 100644 --- a/scripts/gcc-plugins/cyc_complexity_plugin.c +++ b/scripts/gcc-plugins/cyc_complexity_plugin.c @@ -20,7 +20,7 @@ #include "gcc-common.h" -int plugin_is_GPL_compatible; +__visible int plugin_is_GPL_compatible; static struct plugin_info cyc_complexity_plugin_info = { .version = "20160225", @@ -49,7 +49,7 @@ static unsigned int cyc_complexity_execute(void) #include "gcc-generate-gimple-pass.h" -int plugin_init(struct plugin_name_args *plugin_info, struct plugin_gcc_version *version) +__visible int plugin_init(struct plugin_name_args *plugin_info, struct plugin_gcc_version *version) { const char * const plugin_name = plugin_info->base_name; struct register_pass_info cyc_complexity_pass_info; diff --git a/scripts/gcc-plugins/gcc-common.h b/scripts/gcc-plugins/gcc-common.h index 172850bcd0d9..950fd2e64bb7 100644 --- a/scripts/gcc-plugins/gcc-common.h +++ b/scripts/gcc-plugins/gcc-common.h @@ -130,6 +130,7 @@ extern void dump_gimple_stmt(pretty_printer *, gimple, int, int); #endif #define __unused __attribute__((__unused__)) +#define __visible __attribute__((visibility("default"))) #define DECL_NAME_POINTER(node) IDENTIFIER_POINTER(DECL_NAME(node)) #define DECL_NAME_LENGTH(node) IDENTIFIER_LENGTH(DECL_NAME(node)) diff --git a/scripts/gcc-plugins/latent_entropy_plugin.c b/scripts/gcc-plugins/latent_entropy_plugin.c index ff1939b804ae..9d3d4adf3be8 100644 --- a/scripts/gcc-plugins/latent_entropy_plugin.c +++ b/scripts/gcc-plugins/latent_entropy_plugin.c @@ -77,7 +77,7 @@ #include "gcc-common.h" -int plugin_is_GPL_compatible; +__visible int plugin_is_GPL_compatible; static GTY(()) tree latent_entropy_decl; @@ -584,8 +584,8 @@ static void latent_entropy_start_unit(void *gcc_data __unused, | TODO_update_ssa #include "gcc-generate-gimple-pass.h" -int plugin_init(struct plugin_name_args *plugin_info, - struct plugin_gcc_version *version) +__visible int plugin_init(struct plugin_name_args *plugin_info, + struct plugin_gcc_version *version) { bool enabled = true; const char * const plugin_name = plugin_info->base_name; diff --git a/scripts/gcc-plugins/sancov_plugin.c b/scripts/gcc-plugins/sancov_plugin.c index aedd6113cb73..7ea0b3f50739 100644 --- a/scripts/gcc-plugins/sancov_plugin.c +++ b/scripts/gcc-plugins/sancov_plugin.c @@ -21,7 +21,7 @@ #include "gcc-common.h" -int plugin_is_GPL_compatible; +__visible int plugin_is_GPL_compatible; tree sancov_fndecl; @@ -86,7 +86,7 @@ static void sancov_start_unit(void __unused *gcc_data, void __unused *user_data) #endif } -int plugin_init(struct plugin_name_args *plugin_info, struct plugin_gcc_version *version) +__visible int plugin_init(struct plugin_name_args *plugin_info, struct plugin_gcc_version *version) { int i; struct register_pass_info sancov_plugin_pass_info; -- cgit From 19bda36c4299ce3d7e5bce10bebe01764a655a6d Mon Sep 17 00:00:00 2001 From: Xin Long Date: Fri, 28 Oct 2016 18:18:01 +0800 Subject: ipv6: add mtu lock check in __ip6_rt_update_pmtu Prior to this patch, ipv6 didn't do mtu lock check in ip6_update_pmtu. It leaded to that mtu lock doesn't really work when receiving the pkt of ICMPV6_PKT_TOOBIG. This patch is to add mtu lock check in __ip6_rt_update_pmtu just as ipv4 did in __ip_rt_update_pmtu. Acked-by: Hannes Frederic Sowa Signed-off-by: Xin Long Signed-off-by: David S. Miller --- net/ipv6/route.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 947ed1ded026..7403d90dcb38 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1364,6 +1364,9 @@ static void __ip6_rt_update_pmtu(struct dst_entry *dst, const struct sock *sk, if (rt6->rt6i_flags & RTF_LOCAL) return; + if (dst_metric_locked(dst, RTAX_MTU)) + return; + dst_confirm(dst); mtu = max_t(u32, mtu, IPV6_MIN_MTU); if (mtu >= dst_mtu(dst)) -- cgit From 022d00ee0b55e6cd49048acadb9bf76c37e538d8 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 31 Oct 2016 11:25:43 +0000 Subject: ASoC: lpass-platform: Fix broken pcm data usage This patch fixes lpass-platform driver which was broken in v4.9-rc1. lpass_pcm_data data structure holds information specific to stream. Holding a single private pointer to it in global lpass_data will not work, because it would be overwritten by for each pcm instance. This code was breaking playback when we have both playback and capture pcm streams, as playback settings are over written by capture settings. Fix this by moving channel allocation logic out of pcm_new to pcm_open so that we can store the stream specific information in private_data of snd_pcm_runtime. Fixes: 6adcbdcd4b6e ("ASoC: lpass-platform: don't use snd_soc_pcm_set_drvdata()") Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/lpass-platform.c | 165 +++++++++++++++++++--------------------- sound/soc/qcom/lpass.h | 1 - 2 files changed, 79 insertions(+), 87 deletions(-) diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c index e2ff538a8aa5..07000f53db44 100644 --- a/sound/soc/qcom/lpass-platform.c +++ b/sound/soc/qcom/lpass-platform.c @@ -61,7 +61,40 @@ static int lpass_platform_pcmops_open(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; - int ret; + struct snd_soc_dai *cpu_dai = soc_runtime->cpu_dai; + struct lpass_data *drvdata = + snd_soc_platform_get_drvdata(soc_runtime->platform); + struct lpass_variant *v = drvdata->variant; + int ret, dma_ch, dir = substream->stream; + struct lpass_pcm_data *data; + + data = devm_kzalloc(soc_runtime->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->i2s_port = cpu_dai->driver->id; + runtime->private_data = data; + + if (v->alloc_dma_channel) + dma_ch = v->alloc_dma_channel(drvdata, dir); + if (dma_ch < 0) + return dma_ch; + + drvdata->substream[dma_ch] = substream; + + ret = regmap_write(drvdata->lpaif_map, + LPAIF_DMACTL_REG(v, dma_ch, dir), 0); + if (ret) { + dev_err(soc_runtime->dev, + "%s() error writing to rdmactl reg: %d\n", + __func__, ret); + return ret; + } + + if (dir == SNDRV_PCM_STREAM_PLAYBACK) + data->rdma_ch = dma_ch; + else + data->wrdma_ch = dma_ch; snd_soc_set_runtime_hwparams(substream, &lpass_platform_pcm_hardware); @@ -80,13 +113,40 @@ static int lpass_platform_pcmops_open(struct snd_pcm_substream *substream) return 0; } +static int lpass_platform_pcmops_close(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; + struct lpass_data *drvdata = + snd_soc_platform_get_drvdata(soc_runtime->platform); + struct lpass_variant *v = drvdata->variant; + struct lpass_pcm_data *data; + int dma_ch, dir = substream->stream; + + data = runtime->private_data; + v = drvdata->variant; + + if (dir == SNDRV_PCM_STREAM_PLAYBACK) + dma_ch = data->rdma_ch; + else + dma_ch = data->wrdma_ch; + + drvdata->substream[dma_ch] = NULL; + + if (v->free_dma_channel) + v->free_dma_channel(drvdata, dma_ch); + + return 0; +} + static int lpass_platform_pcmops_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; struct lpass_data *drvdata = snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_pcm_data *pcm_data = drvdata->private_data; + struct snd_pcm_runtime *rt = substream->runtime; + struct lpass_pcm_data *pcm_data = rt->private_data; struct lpass_variant *v = drvdata->variant; snd_pcm_format_t format = params_format(params); unsigned int channels = params_channels(params); @@ -179,7 +239,8 @@ static int lpass_platform_pcmops_hw_free(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; struct lpass_data *drvdata = snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_pcm_data *pcm_data = drvdata->private_data; + struct snd_pcm_runtime *rt = substream->runtime; + struct lpass_pcm_data *pcm_data = rt->private_data; struct lpass_variant *v = drvdata->variant; unsigned int reg; int ret; @@ -203,7 +264,8 @@ static int lpass_platform_pcmops_prepare(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; struct lpass_data *drvdata = snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_pcm_data *pcm_data = drvdata->private_data; + struct snd_pcm_runtime *rt = substream->runtime; + struct lpass_pcm_data *pcm_data = rt->private_data; struct lpass_variant *v = drvdata->variant; int ret, ch, dir = substream->stream; @@ -257,7 +319,8 @@ static int lpass_platform_pcmops_trigger(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; struct lpass_data *drvdata = snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_pcm_data *pcm_data = drvdata->private_data; + struct snd_pcm_runtime *rt = substream->runtime; + struct lpass_pcm_data *pcm_data = rt->private_data; struct lpass_variant *v = drvdata->variant; int ret, ch, dir = substream->stream; @@ -333,7 +396,8 @@ static snd_pcm_uframes_t lpass_platform_pcmops_pointer( struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; struct lpass_data *drvdata = snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_pcm_data *pcm_data = drvdata->private_data; + struct snd_pcm_runtime *rt = substream->runtime; + struct lpass_pcm_data *pcm_data = rt->private_data; struct lpass_variant *v = drvdata->variant; unsigned int base_addr, curr_addr; int ret, ch, dir = substream->stream; @@ -374,6 +438,7 @@ static int lpass_platform_pcmops_mmap(struct snd_pcm_substream *substream, static const struct snd_pcm_ops lpass_platform_pcm_ops = { .open = lpass_platform_pcmops_open, + .close = lpass_platform_pcmops_close, .ioctl = snd_pcm_lib_ioctl, .hw_params = lpass_platform_pcmops_hw_params, .hw_free = lpass_platform_pcmops_hw_free, @@ -470,117 +535,45 @@ static int lpass_platform_pcm_new(struct snd_soc_pcm_runtime *soc_runtime) { struct snd_pcm *pcm = soc_runtime->pcm; struct snd_pcm_substream *psubstream, *csubstream; - struct snd_soc_dai *cpu_dai = soc_runtime->cpu_dai; - struct lpass_data *drvdata = - snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_variant *v = drvdata->variant; int ret = -EINVAL; - struct lpass_pcm_data *data; size_t size = lpass_platform_pcm_hardware.buffer_bytes_max; - data = devm_kzalloc(soc_runtime->dev, sizeof(*data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->i2s_port = cpu_dai->driver->id; - drvdata->private_data = data; - psubstream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream; if (psubstream) { - if (v->alloc_dma_channel) - data->rdma_ch = v->alloc_dma_channel(drvdata, - SNDRV_PCM_STREAM_PLAYBACK); - - if (data->rdma_ch < 0) - return data->rdma_ch; - - drvdata->substream[data->rdma_ch] = psubstream; - ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, soc_runtime->platform->dev, size, &psubstream->dma_buffer); - if (ret) - goto playback_alloc_err; - - ret = regmap_write(drvdata->lpaif_map, - LPAIF_RDMACTL_REG(v, data->rdma_ch), 0); if (ret) { - dev_err(soc_runtime->dev, - "%s() error writing to rdmactl reg: %d\n", - __func__, ret); - goto capture_alloc_err; + dev_err(soc_runtime->dev, "Cannot allocate buffer(s)\n"); + return ret; } } csubstream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream; if (csubstream) { - if (v->alloc_dma_channel) - data->wrdma_ch = v->alloc_dma_channel(drvdata, - SNDRV_PCM_STREAM_CAPTURE); - - if (data->wrdma_ch < 0) { - ret = data->wrdma_ch; - goto capture_alloc_err; - } - - drvdata->substream[data->wrdma_ch] = csubstream; - ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, soc_runtime->platform->dev, size, &csubstream->dma_buffer); - if (ret) - goto capture_alloc_err; - - ret = regmap_write(drvdata->lpaif_map, - LPAIF_WRDMACTL_REG(v, data->wrdma_ch), 0); if (ret) { - dev_err(soc_runtime->dev, - "%s() error writing to wrdmactl reg: %d\n", - __func__, ret); - goto capture_reg_err; + dev_err(soc_runtime->dev, "Cannot allocate buffer(s)\n"); + if (psubstream) + snd_dma_free_pages(&psubstream->dma_buffer); + return ret; } + } return 0; - -capture_reg_err: - if (csubstream) - snd_dma_free_pages(&csubstream->dma_buffer); - -capture_alloc_err: - if (psubstream) - snd_dma_free_pages(&psubstream->dma_buffer); - - playback_alloc_err: - dev_err(soc_runtime->dev, "Cannot allocate buffer(s)\n"); - - return ret; } static void lpass_platform_pcm_free(struct snd_pcm *pcm) { - struct snd_soc_pcm_runtime *rt; - struct lpass_data *drvdata; - struct lpass_pcm_data *data; - struct lpass_variant *v; struct snd_pcm_substream *substream; - int ch, i; + int i; for (i = 0; i < ARRAY_SIZE(pcm->streams); i++) { substream = pcm->streams[i].substream; if (substream) { - rt = substream->private_data; - drvdata = snd_soc_platform_get_drvdata(rt->platform); - data = drvdata->private_data; - - ch = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - ? data->rdma_ch - : data->wrdma_ch; - v = drvdata->variant; - drvdata->substream[ch] = NULL; - if (v->free_dma_channel) - v->free_dma_channel(drvdata, ch); - snd_dma_free_pages(&substream->dma_buffer); substream->dma_buffer.area = NULL; substream->dma_buffer.addr = 0; diff --git a/sound/soc/qcom/lpass.h b/sound/soc/qcom/lpass.h index 35b3cea8207d..924971b6ded5 100644 --- a/sound/soc/qcom/lpass.h +++ b/sound/soc/qcom/lpass.h @@ -59,7 +59,6 @@ struct lpass_data { struct clk *pcnoc_mport_clk; struct clk *pcnoc_sway_clk; - void *private_data; }; /* Vairant data per each SOC */ -- cgit From 94201798dbce1cfd242407f1f422819a735c838f Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 31 Oct 2016 11:25:45 +0000 Subject: ASoC: lpass-cpu: add module licence and description This patch adds module licence to lpass-cpu driver, without this patch lpass-cpu module would taint with below error: snd_soc_lpass_cpu: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint snd_soc_lpass_cpu: Unknown symbol regmap_write (err 0) snd_soc_lpass_cpu: Unknown symbol devm_kmalloc (err 0) ... Signed-off-by: Srinivas Kandagatla Acked-by: Kenneth Westfield Signed-off-by: Mark Brown --- sound/soc/qcom/lpass-cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c index 3cde9fb977fa..eff3f9a8b685 100644 --- a/sound/soc/qcom/lpass-cpu.c +++ b/sound/soc/qcom/lpass-cpu.c @@ -586,3 +586,6 @@ int asoc_qcom_lpass_cpu_platform_remove(struct platform_device *pdev) return 0; } EXPORT_SYMBOL_GPL(asoc_qcom_lpass_cpu_platform_remove); + +MODULE_DESCRIPTION("QTi LPASS CPU Driver"); +MODULE_LICENSE("GPL v2"); -- cgit From 58bea4144d235cee5bb51203b032ddafd6d1cf8d Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 19 Oct 2016 00:08:04 +0200 Subject: latent_entropy: Fix wrong gcc code generation with 64 bit variables The stack frame size could grow too large when the plugin used long long on 32-bit architectures when the given function had too many basic blocks. The gcc warning was: drivers/pci/hotplug/ibmphp_ebda.c: In function 'ibmphp_access_ebda': drivers/pci/hotplug/ibmphp_ebda.c:409:1: warning: the frame size of 1108 bytes is larger than 1024 bytes [-Wframe-larger-than=] This switches latent_entropy from u64 to unsigned long. Thanks to PaX Team and Emese Revfy for the patch. Signed-off-by: Kees Cook --- mm/page_alloc.c | 2 +- scripts/gcc-plugins/latent_entropy_plugin.c | 19 +++++++++---------- 2 files changed, 10 insertions(+), 11 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 2b3bf6767d54..1b10c14de5db 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -92,7 +92,7 @@ int _node_numa_mem_[MAX_NUMNODES]; #endif #ifdef CONFIG_GCC_PLUGIN_LATENT_ENTROPY -volatile u64 latent_entropy __latent_entropy; +volatile unsigned long latent_entropy __latent_entropy; EXPORT_SYMBOL(latent_entropy); #endif diff --git a/scripts/gcc-plugins/latent_entropy_plugin.c b/scripts/gcc-plugins/latent_entropy_plugin.c index 9d3d4adf3be8..8160f1c1b56e 100644 --- a/scripts/gcc-plugins/latent_entropy_plugin.c +++ b/scripts/gcc-plugins/latent_entropy_plugin.c @@ -340,7 +340,7 @@ static enum tree_code get_op(tree *rhs) break; } if (rhs) - *rhs = build_int_cstu(unsigned_intDI_type_node, random_const); + *rhs = build_int_cstu(long_unsigned_type_node, random_const); return op; } @@ -372,7 +372,7 @@ static void __perturb_latent_entropy(gimple_stmt_iterator *gsi, enum tree_code op; /* 1. create temporary copy of latent_entropy */ - temp = create_var(unsigned_intDI_type_node, "tmp_latent_entropy"); + temp = create_var(long_unsigned_type_node, "temp_latent_entropy"); /* 2. read... */ add_referenced_var(latent_entropy_decl); @@ -459,13 +459,13 @@ static void init_local_entropy(basic_block bb, tree local_entropy) gsi_insert_before(&gsi, call, GSI_NEW_STMT); update_stmt(call); - udi_frame_addr = fold_convert(unsigned_intDI_type_node, frame_addr); + udi_frame_addr = fold_convert(long_unsigned_type_node, frame_addr); assign = gimple_build_assign(local_entropy, udi_frame_addr); gsi_insert_after(&gsi, assign, GSI_NEW_STMT); update_stmt(assign); /* 3. create temporary copy of latent_entropy */ - tmp = create_var(unsigned_intDI_type_node, "tmp_latent_entropy"); + tmp = create_var(long_unsigned_type_node, "temp_latent_entropy"); /* 4. read the global entropy variable into local entropy */ add_referenced_var(latent_entropy_decl); @@ -480,7 +480,7 @@ static void init_local_entropy(basic_block bb, tree local_entropy) update_stmt(assign); rand_cst = get_random_const(); - rand_const = build_int_cstu(unsigned_intDI_type_node, rand_cst); + rand_const = build_int_cstu(long_unsigned_type_node, rand_cst); op = get_op(NULL); assign = create_assign(op, local_entropy, local_entropy, rand_const); gsi_insert_after(&gsi, assign, GSI_NEW_STMT); @@ -529,7 +529,7 @@ static unsigned int latent_entropy_execute(void) } /* 1. create the local entropy variable */ - local_entropy = create_var(unsigned_intDI_type_node, "local_entropy"); + local_entropy = create_var(long_unsigned_type_node, "local_entropy"); /* 2. initialize the local entropy variable */ init_local_entropy(bb, local_entropy); @@ -561,10 +561,9 @@ static void latent_entropy_start_unit(void *gcc_data __unused, if (in_lto_p) return; - /* extern volatile u64 latent_entropy */ - gcc_assert(TYPE_PRECISION(long_long_unsigned_type_node) == 64); - quals = TYPE_QUALS(long_long_unsigned_type_node) | TYPE_QUAL_VOLATILE; - type = build_qualified_type(long_long_unsigned_type_node, quals); + /* extern volatile unsigned long latent_entropy */ + quals = TYPE_QUALS(long_unsigned_type_node) | TYPE_QUAL_VOLATILE; + type = build_qualified_type(long_unsigned_type_node, quals); id = get_identifier("latent_entropy"); latent_entropy_decl = build_decl(UNKNOWN_LOCATION, VAR_DECL, id, type); -- cgit From ce6dd23329b1ee6a794acf5f7e40f8e89b8317ee Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 28 Oct 2016 18:43:11 +0200 Subject: dctcp: avoid bogus doubling of cwnd after loss If a congestion control module doesn't provide .undo_cwnd function, tcp_undo_cwnd_reduction() will set cwnd to tp->snd_cwnd = max(tp->snd_cwnd, tp->snd_ssthresh << 1); ... which makes sense for reno (it sets ssthresh to half the current cwnd), but it makes no sense for dctcp, which sets ssthresh based on the current congestion estimate. This can cause severe growth of cwnd (eventually overflowing u32). Fix this by saving last cwnd on loss and restore cwnd based on that, similar to cubic and other algorithms. Fixes: e3118e8359bb7c ("net: tcp: add DCTCP congestion control algorithm") Cc: Lawrence Brakmo Cc: Andrew Shewmaker Cc: Glenn Judd Acked-by: Daniel Borkmann Signed-off-by: Florian Westphal Signed-off-by: David S. Miller --- net/ipv4/tcp_dctcp.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/net/ipv4/tcp_dctcp.c b/net/ipv4/tcp_dctcp.c index 10d728b6804c..ab37c6775630 100644 --- a/net/ipv4/tcp_dctcp.c +++ b/net/ipv4/tcp_dctcp.c @@ -56,6 +56,7 @@ struct dctcp { u32 next_seq; u32 ce_state; u32 delayed_ack_reserved; + u32 loss_cwnd; }; static unsigned int dctcp_shift_g __read_mostly = 4; /* g = 1/2^4 */ @@ -96,6 +97,7 @@ static void dctcp_init(struct sock *sk) ca->dctcp_alpha = min(dctcp_alpha_on_init, DCTCP_MAX_ALPHA); ca->delayed_ack_reserved = 0; + ca->loss_cwnd = 0; ca->ce_state = 0; dctcp_reset(tp, ca); @@ -111,9 +113,10 @@ static void dctcp_init(struct sock *sk) static u32 dctcp_ssthresh(struct sock *sk) { - const struct dctcp *ca = inet_csk_ca(sk); + struct dctcp *ca = inet_csk_ca(sk); struct tcp_sock *tp = tcp_sk(sk); + ca->loss_cwnd = tp->snd_cwnd; return max(tp->snd_cwnd - ((tp->snd_cwnd * ca->dctcp_alpha) >> 11U), 2U); } @@ -308,12 +311,20 @@ static size_t dctcp_get_info(struct sock *sk, u32 ext, int *attr, return 0; } +static u32 dctcp_cwnd_undo(struct sock *sk) +{ + const struct dctcp *ca = inet_csk_ca(sk); + + return max(tcp_sk(sk)->snd_cwnd, ca->loss_cwnd); +} + static struct tcp_congestion_ops dctcp __read_mostly = { .init = dctcp_init, .in_ack_event = dctcp_update_alpha, .cwnd_event = dctcp_cwnd_event, .ssthresh = dctcp_ssthresh, .cong_avoid = tcp_reno_cong_avoid, + .undo_cwnd = dctcp_cwnd_undo, .set_state = dctcp_state, .get_info = dctcp_get_info, .flags = TCP_CONG_NEEDS_ECN, -- cgit From e551c32d57c88923f99f8f010e89ca7ed0735e83 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 28 Oct 2016 13:40:24 -0700 Subject: net: clear sk_err_soft in sk_clone_lock() At accept() time, it is possible the parent has a non zero sk_err_soft, leftover from a prior error. Make sure we do not leave this value in the child, as it makes future getsockopt(SO_ERROR) calls quite unreliable. Signed-off-by: Eric Dumazet Acked-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller --- net/core/sock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/sock.c b/net/core/sock.c index c73e28fc9c2a..df171acfe232 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1543,6 +1543,7 @@ struct sock *sk_clone_lock(const struct sock *sk, const gfp_t priority) RCU_INIT_POINTER(newsk->sk_reuseport_cb, NULL); newsk->sk_err = 0; + newsk->sk_err_soft = 0; newsk->sk_priority = 0; newsk->sk_incoming_cpu = raw_smp_processor_id(); atomic64_set(&newsk->sk_cookie, 0); -- cgit From 4f2e4ad56a65f3b7d64c258e373cb71e8d2499f4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 29 Oct 2016 11:02:36 -0700 Subject: net: mangle zero checksum in skb_checksum_help() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sending zero checksum is ok for TCP, but not for UDP. UDPv6 receiver should by default drop a frame with a 0 checksum, and UDPv4 would not verify the checksum and might accept a corrupted packet. Simply replace such checksum by 0xffff, regardless of transport. This error was caught on SIT tunnels, but seems generic. Signed-off-by: Eric Dumazet Cc: Maciej Żenczykowski Cc: Willem de Bruijn Acked-by: Maciej Żenczykowski Signed-off-by: David S. Miller --- net/core/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index 820bac239738..eaad4c28069f 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2484,7 +2484,7 @@ int skb_checksum_help(struct sk_buff *skb) goto out; } - *(__sum16 *)(skb->data + offset) = csum_fold(csum); + *(__sum16 *)(skb->data + offset) = csum_fold(csum) ?: CSUM_MANGLED_0; out_set_summed: skb->ip_summed = CHECKSUM_NONE; out: -- cgit From cbbf049a7c346180cc61ae0a9245c5d749d20a12 Mon Sep 17 00:00:00 2001 From: "Mintz, Yuval" Date: Sun, 30 Oct 2016 10:25:42 +0200 Subject: qede: Fix statistics' strings for Tx/Rx queues When an interface is configured to use Tx/Rx-only queues, the length of the statistics would be shortened to accomodate only the statistics required per-each queue, and the values would be provided accordingly. However, the strings provided would still contain both Tx and Rx strings for each one of the queues [regardless of its configuration], which might lead to out-of-bound access when filling the buffers as well as incorrect statistics presented. Fixes: 9a4d7e86acf3 ("qede: Add support for Tx/Rx-only queues.") Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c index 12251a1032d1..7567cc464b88 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c +++ b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c @@ -175,16 +175,23 @@ static void qede_get_strings_stats(struct qede_dev *edev, u8 *buf) for (i = 0, k = 0; i < QEDE_QUEUE_CNT(edev); i++) { int tc; - for (j = 0; j < QEDE_NUM_RQSTATS; j++) - sprintf(buf + (k + j) * ETH_GSTRING_LEN, - "%d: %s", i, qede_rqstats_arr[j].string); - k += QEDE_NUM_RQSTATS; - for (tc = 0; tc < edev->num_tc; tc++) { - for (j = 0; j < QEDE_NUM_TQSTATS; j++) + if (edev->fp_array[i].type & QEDE_FASTPATH_RX) { + for (j = 0; j < QEDE_NUM_RQSTATS; j++) sprintf(buf + (k + j) * ETH_GSTRING_LEN, - "%d.%d: %s", i, tc, - qede_tqstats_arr[j].string); - k += QEDE_NUM_TQSTATS; + "%d: %s", i, + qede_rqstats_arr[j].string); + k += QEDE_NUM_RQSTATS; + } + + if (edev->fp_array[i].type & QEDE_FASTPATH_TX) { + for (tc = 0; tc < edev->num_tc; tc++) { + for (j = 0; j < QEDE_NUM_TQSTATS; j++) + sprintf(buf + (k + j) * + ETH_GSTRING_LEN, + "%d.%d: %s", i, tc, + qede_tqstats_arr[j].string); + k += QEDE_NUM_TQSTATS; + } } } -- cgit From 46d0847cdd4a3fc1920e56827b9189b9a105d362 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Sun, 30 Oct 2016 10:09:22 +0100 Subject: mlxsw: spectrum: Fix incorrect reuse of MID entries In the device, a MID entry represents a group of local ports, which can later be bound to a MDB entry. The lookup of an existing MID entry is currently done using the provided MC MAC address and VID, from the Linux bridge. However, this can result in an incorrect reuse of the same MID index in different VLAN-unaware bridges (same IP MC group and VID 0). Fix this by performing the lookup based on FID instead of VID, which is unique across different bridges. Fixes: 3a49b4fde2a1 ("mlxsw: Adding layer 2 multicast support") Signed-off-by: Ido Schimmel Acked-by: Elad Raz Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 2 +- drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 14 +++++++------- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h index 9b22863a924b..97bbc1d21df8 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h @@ -115,7 +115,7 @@ struct mlxsw_sp_rif { struct mlxsw_sp_mid { struct list_head list; unsigned char addr[ETH_ALEN]; - u16 vid; + u16 fid; u16 mid; unsigned int ref_count; }; diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index 5e00c79e8133..1e2c8eca3af1 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -929,12 +929,12 @@ static int mlxsw_sp_port_smid_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 mid, static struct mlxsw_sp_mid *__mlxsw_sp_mc_get(struct mlxsw_sp *mlxsw_sp, const unsigned char *addr, - u16 vid) + u16 fid) { struct mlxsw_sp_mid *mid; list_for_each_entry(mid, &mlxsw_sp->br_mids.list, list) { - if (ether_addr_equal(mid->addr, addr) && mid->vid == vid) + if (ether_addr_equal(mid->addr, addr) && mid->fid == fid) return mid; } return NULL; @@ -942,7 +942,7 @@ static struct mlxsw_sp_mid *__mlxsw_sp_mc_get(struct mlxsw_sp *mlxsw_sp, static struct mlxsw_sp_mid *__mlxsw_sp_mc_alloc(struct mlxsw_sp *mlxsw_sp, const unsigned char *addr, - u16 vid) + u16 fid) { struct mlxsw_sp_mid *mid; u16 mid_idx; @@ -958,7 +958,7 @@ static struct mlxsw_sp_mid *__mlxsw_sp_mc_alloc(struct mlxsw_sp *mlxsw_sp, set_bit(mid_idx, mlxsw_sp->br_mids.mapped); ether_addr_copy(mid->addr, addr); - mid->vid = vid; + mid->fid = fid; mid->mid = mid_idx; mid->ref_count = 0; list_add_tail(&mid->list, &mlxsw_sp->br_mids.list); @@ -991,9 +991,9 @@ static int mlxsw_sp_port_mdb_add(struct mlxsw_sp_port *mlxsw_sp_port, if (switchdev_trans_ph_prepare(trans)) return 0; - mid = __mlxsw_sp_mc_get(mlxsw_sp, mdb->addr, mdb->vid); + mid = __mlxsw_sp_mc_get(mlxsw_sp, mdb->addr, fid); if (!mid) { - mid = __mlxsw_sp_mc_alloc(mlxsw_sp, mdb->addr, mdb->vid); + mid = __mlxsw_sp_mc_alloc(mlxsw_sp, mdb->addr, fid); if (!mid) { netdev_err(dev, "Unable to allocate MC group\n"); return -ENOMEM; @@ -1137,7 +1137,7 @@ static int mlxsw_sp_port_mdb_del(struct mlxsw_sp_port *mlxsw_sp_port, u16 mid_idx; int err = 0; - mid = __mlxsw_sp_mc_get(mlxsw_sp, mdb->addr, mdb->vid); + mid = __mlxsw_sp_mc_get(mlxsw_sp, mdb->addr, fid); if (!mid) { netdev_err(dev, "Unable to remove port from MC DB\n"); return -EINVAL; -- cgit From 460d2830b00db407be2b72ed792eb3596f245192 Mon Sep 17 00:00:00 2001 From: Lukas Resch Date: Mon, 10 Oct 2016 08:07:32 +0000 Subject: can: sja1000: plx_pci: Add support for Moxa CAN devices This patch adds support for Moxa CAN devices. Signed-off-by: Lukas Resch Signed-off-by: Christoph Zehentner Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/plx_pci.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c index 3eb7430dffbf..f8ff25c8ee2e 100644 --- a/drivers/net/can/sja1000/plx_pci.c +++ b/drivers/net/can/sja1000/plx_pci.c @@ -142,6 +142,9 @@ struct plx_pci_card { #define CTI_PCI_VENDOR_ID 0x12c4 #define CTI_PCI_DEVICE_ID_CRG001 0x0900 +#define MOXA_PCI_VENDOR_ID 0x1393 +#define MOXA_PCI_DEVICE_ID 0x0100 + static void plx_pci_reset_common(struct pci_dev *pdev); static void plx9056_pci_reset_common(struct pci_dev *pdev); static void plx_pci_reset_marathon_pci(struct pci_dev *pdev); @@ -258,6 +261,14 @@ static struct plx_pci_card_info plx_pci_card_info_elcus = { /* based on PLX9030 */ }; +static struct plx_pci_card_info plx_pci_card_info_moxa = { + "MOXA", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {0, 0x00, 0x80}, {1, 0x00, 0x80} }, + &plx_pci_reset_common + /* based on PLX9052 */ +}; + static const struct pci_device_id plx_pci_tbl[] = { { /* Adlink PCI-7841/cPCI-7841 */ @@ -357,6 +368,13 @@ static const struct pci_device_id plx_pci_tbl[] = { 0, 0, (kernel_ulong_t)&plx_pci_card_info_elcus }, + { + /* moxa */ + MOXA_PCI_VENDOR_ID, MOXA_PCI_DEVICE_ID, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_moxa + }, { 0,} }; MODULE_DEVICE_TABLE(pci, plx_pci_tbl); -- cgit From deb507f91f1adbf64317ad24ac46c56eeccfb754 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Mon, 24 Oct 2016 21:11:26 +0200 Subject: can: bcm: fix warning in bcm_connect/proc_register Andrey Konovalov reported an issue with proc_register in bcm.c. As suggested by Cong Wang this patch adds a lock_sock() protection and a check for unsuccessful proc_create_data() in bcm_connect(). Reference: http://marc.info/?l=linux-netdev&m=147732648731237 Reported-by: Andrey Konovalov Suggested-by: Cong Wang Signed-off-by: Oliver Hartkopp Acked-by: Cong Wang Tested-by: Andrey Konovalov Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- net/can/bcm.c | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-) diff --git a/net/can/bcm.c b/net/can/bcm.c index 8e999ffdf28b..8af9d25ff988 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -1549,24 +1549,31 @@ static int bcm_connect(struct socket *sock, struct sockaddr *uaddr, int len, struct sockaddr_can *addr = (struct sockaddr_can *)uaddr; struct sock *sk = sock->sk; struct bcm_sock *bo = bcm_sk(sk); + int ret = 0; if (len < sizeof(*addr)) return -EINVAL; - if (bo->bound) - return -EISCONN; + lock_sock(sk); + + if (bo->bound) { + ret = -EISCONN; + goto fail; + } /* bind a device to this socket */ if (addr->can_ifindex) { struct net_device *dev; dev = dev_get_by_index(&init_net, addr->can_ifindex); - if (!dev) - return -ENODEV; - + if (!dev) { + ret = -ENODEV; + goto fail; + } if (dev->type != ARPHRD_CAN) { dev_put(dev); - return -ENODEV; + ret = -ENODEV; + goto fail; } bo->ifindex = dev->ifindex; @@ -1577,17 +1584,24 @@ static int bcm_connect(struct socket *sock, struct sockaddr *uaddr, int len, bo->ifindex = 0; } - bo->bound = 1; - if (proc_dir) { /* unique socket address as filename */ sprintf(bo->procname, "%lu", sock_i_ino(sk)); bo->bcm_proc_read = proc_create_data(bo->procname, 0644, proc_dir, &bcm_proc_fops, sk); + if (!bo->bcm_proc_read) { + ret = -ENOMEM; + goto fail; + } } - return 0; + bo->bound = 1; + +fail: + release_sock(sk); + + return ret; } static int bcm_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, -- cgit From 87557efc27f6a50140fb20df06a917f368ce3c66 Mon Sep 17 00:00:00 2001 From: Dongli Zhang Date: Mon, 31 Oct 2016 13:38:29 +0800 Subject: xen-netfront: do not cast grant table reference to signed short While grant reference is of type uint32_t, xen-netfront erroneously casts it to signed short in BUG_ON(). This would lead to the xen domU panic during boot-up or migration when it is attached with lots of paravirtual devices. Signed-off-by: Dongli Zhang Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index e17879dd5d5a..189a28dcd80d 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -304,7 +304,7 @@ static void xennet_alloc_rx_buffers(struct netfront_queue *queue) queue->rx_skbs[id] = skb; ref = gnttab_claim_grant_reference(&queue->gref_rx_head); - BUG_ON((signed short)ref < 0); + WARN_ON_ONCE(IS_ERR_VALUE((unsigned long)ref)); queue->grant_rx_ref[id] = ref; page = skb_frag_page(&skb_shinfo(skb)->frags[0]); @@ -428,7 +428,7 @@ static void xennet_tx_setup_grant(unsigned long gfn, unsigned int offset, id = get_id_from_freelist(&queue->tx_skb_freelist, queue->tx_skbs); tx = RING_GET_REQUEST(&queue->tx, queue->tx.req_prod_pvt++); ref = gnttab_claim_grant_reference(&queue->gref_tx_head); - BUG_ON((signed short)ref < 0); + WARN_ON_ONCE(IS_ERR_VALUE((unsigned long)ref)); gnttab_grant_foreign_access_ref(ref, queue->info->xbdev->otherend_id, gfn, GNTMAP_readonly); -- cgit From cd26da4ff4eb7189921d4e7ad87e8adebb7b416b Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 31 Oct 2016 20:32:31 +0800 Subject: sctp: hold transport instead of assoc in sctp_diag In sctp_transport_lookup_process(), Commit 1cceda784980 ("sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock") moved cb() out of rcu lock, but it put transport and hold assoc instead, and ignore that cb() still uses transport. It may cause a use-after-free issue. This patch is to hold transport instead of assoc there. Fixes: 1cceda784980 ("sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock") Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- net/sctp/socket.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 9fbb6feb8c27..71b75f9d9c1b 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4480,12 +4480,9 @@ int sctp_transport_lookup_process(int (*cb)(struct sctp_transport *, void *), if (!transport || !sctp_transport_hold(transport)) goto out; - sctp_association_hold(transport->asoc); - sctp_transport_put(transport); - rcu_read_unlock(); err = cb(transport, p); - sctp_association_put(transport->asoc); + sctp_transport_put(transport); out: return err; -- cgit From 7c17fcc726903ffed1716351efdc617e752533ed Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 31 Oct 2016 20:32:32 +0800 Subject: sctp: return back transport in __sctp_rcv_init_lookup Prior to this patch, it used a local variable to save the transport that is looked up by __sctp_lookup_association(), and didn't return it back. But in sctp_rcv, it is used to initialize chunk->transport. So when hitting this, even if it found the transport, it was still initializing chunk->transport with null instead. This patch is to return the transport back through transport pointer that is from __sctp_rcv_lookup_harder(). Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- net/sctp/input.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/sctp/input.c b/net/sctp/input.c index a2ea1d1cc06a..8e0bc58eec20 100644 --- a/net/sctp/input.c +++ b/net/sctp/input.c @@ -1021,7 +1021,6 @@ static struct sctp_association *__sctp_rcv_init_lookup(struct net *net, struct sctphdr *sh = sctp_hdr(skb); union sctp_params params; sctp_init_chunk_t *init; - struct sctp_transport *transport; struct sctp_af *af; /* @@ -1052,7 +1051,7 @@ static struct sctp_association *__sctp_rcv_init_lookup(struct net *net, af->from_addr_param(paddr, params.addr, sh->source, 0); - asoc = __sctp_lookup_association(net, laddr, paddr, &transport); + asoc = __sctp_lookup_association(net, laddr, paddr, transportp); if (asoc) return asoc; } -- cgit From dae399d7fdee84d8f5227a9711d95bb4e9a05d4e Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 31 Oct 2016 20:32:33 +0800 Subject: sctp: hold transport instead of assoc when lookup assoc in rx path Prior to this patch, in rx path, before calling lock_sock, it needed to hold assoc when got it by __sctp_lookup_association, in case other place would free/put assoc. But in __sctp_lookup_association, it lookup and hold transport, then got assoc by transport->assoc, then hold assoc and put transport. It means it didn't hold transport, yet it was returned and later on directly assigned to chunk->transport. Without the protection of sock lock, the transport may be freed/put by other places, which would cause a use-after-free issue. This patch is to fix this issue by holding transport instead of assoc. As holding transport can make sure to access assoc is also safe, and actually it looks up assoc by searching transport rhashtable, to hold transport here makes more sense. Note that the function will be renamed later on on another patch. Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- include/net/sctp/sctp.h | 2 +- net/sctp/input.c | 32 ++++++++++++++++---------------- net/sctp/ipv6.c | 2 +- 3 files changed, 18 insertions(+), 18 deletions(-) diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index 87a7f42e7639..31acc3f4f132 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -152,7 +152,7 @@ void sctp_unhash_endpoint(struct sctp_endpoint *); struct sock *sctp_err_lookup(struct net *net, int family, struct sk_buff *, struct sctphdr *, struct sctp_association **, struct sctp_transport **); -void sctp_err_finish(struct sock *, struct sctp_association *); +void sctp_err_finish(struct sock *, struct sctp_transport *); void sctp_icmp_frag_needed(struct sock *, struct sctp_association *, struct sctp_transport *t, __u32 pmtu); void sctp_icmp_redirect(struct sock *, struct sctp_transport *, diff --git a/net/sctp/input.c b/net/sctp/input.c index 8e0bc58eec20..a01a56ec8b8c 100644 --- a/net/sctp/input.c +++ b/net/sctp/input.c @@ -181,9 +181,10 @@ int sctp_rcv(struct sk_buff *skb) * bound to another interface, via SO_BINDTODEVICE, treat it as OOTB */ if (sk->sk_bound_dev_if && (sk->sk_bound_dev_if != af->skb_iif(skb))) { - if (asoc) { - sctp_association_put(asoc); + if (transport) { + sctp_transport_put(transport); asoc = NULL; + transport = NULL; } else { sctp_endpoint_put(ep); ep = NULL; @@ -269,8 +270,8 @@ int sctp_rcv(struct sk_buff *skb) bh_unlock_sock(sk); /* Release the asoc/ep ref we took in the lookup calls. */ - if (asoc) - sctp_association_put(asoc); + if (transport) + sctp_transport_put(transport); else sctp_endpoint_put(ep); @@ -283,8 +284,8 @@ discard_it: discard_release: /* Release the asoc/ep ref we took in the lookup calls. */ - if (asoc) - sctp_association_put(asoc); + if (transport) + sctp_transport_put(transport); else sctp_endpoint_put(ep); @@ -300,6 +301,7 @@ int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb) { struct sctp_chunk *chunk = SCTP_INPUT_CB(skb)->chunk; struct sctp_inq *inqueue = &chunk->rcvr->inqueue; + struct sctp_transport *t = chunk->transport; struct sctp_ep_common *rcvr = NULL; int backloged = 0; @@ -351,7 +353,7 @@ int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb) done: /* Release the refs we took in sctp_add_backlog */ if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type) - sctp_association_put(sctp_assoc(rcvr)); + sctp_transport_put(t); else if (SCTP_EP_TYPE_SOCKET == rcvr->type) sctp_endpoint_put(sctp_ep(rcvr)); else @@ -363,6 +365,7 @@ done: static int sctp_add_backlog(struct sock *sk, struct sk_buff *skb) { struct sctp_chunk *chunk = SCTP_INPUT_CB(skb)->chunk; + struct sctp_transport *t = chunk->transport; struct sctp_ep_common *rcvr = chunk->rcvr; int ret; @@ -373,7 +376,7 @@ static int sctp_add_backlog(struct sock *sk, struct sk_buff *skb) * from us */ if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type) - sctp_association_hold(sctp_assoc(rcvr)); + sctp_transport_hold(t); else if (SCTP_EP_TYPE_SOCKET == rcvr->type) sctp_endpoint_hold(sctp_ep(rcvr)); else @@ -537,15 +540,15 @@ struct sock *sctp_err_lookup(struct net *net, int family, struct sk_buff *skb, return sk; out: - sctp_association_put(asoc); + sctp_transport_put(transport); return NULL; } /* Common cleanup code for icmp/icmpv6 error handler. */ -void sctp_err_finish(struct sock *sk, struct sctp_association *asoc) +void sctp_err_finish(struct sock *sk, struct sctp_transport *t) { bh_unlock_sock(sk); - sctp_association_put(asoc); + sctp_transport_put(t); } /* @@ -641,7 +644,7 @@ void sctp_v4_err(struct sk_buff *skb, __u32 info) } out_unlock: - sctp_err_finish(sk, asoc); + sctp_err_finish(sk, transport); } /* @@ -952,11 +955,8 @@ static struct sctp_association *__sctp_lookup_association( goto out; asoc = t->asoc; - sctp_association_hold(asoc); *pt = t; - sctp_transport_put(t); - out: return asoc; } @@ -986,7 +986,7 @@ int sctp_has_association(struct net *net, struct sctp_transport *transport; if ((asoc = sctp_lookup_association(net, laddr, paddr, &transport))) { - sctp_association_put(asoc); + sctp_transport_put(transport); return 1; } diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index f473779e8b1c..176af3080a2b 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -198,7 +198,7 @@ static void sctp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, } out_unlock: - sctp_err_finish(sk, asoc); + sctp_err_finish(sk, transport); out: if (likely(idev != NULL)) in6_dev_put(idev); -- cgit From 953b956a2e6d35298e684f251bad98ea6c96f982 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 24 Oct 2016 13:59:15 +0200 Subject: gpio: GPIO_GET_LINE{HANDLE,EVENT}_IOCTL: Fix file descriptor leak When allocating a new line handle or event a file is allocated that it is associated to. The file is attached to a file descriptor of the current process and the file descriptor is returned to userspace using copy_to_user(). If this copy operation fails the line handle or event allocation is aborted, all acquired resources are freed and an error is returned. But the file struct is not freed and left attached to the userspace application and even though the file descriptor number was not copied it is trivial to guess. If a userspace application performs a IOCTL on such a left over file descriptor it will trigger a use-after-free and if the file descriptor is closed (latest when the application exits) a double-free is triggered. anon_inode_getfd() performs 3 tasks, allocate a file struct, allocate a file descriptor for the current process and install the file struct in the file descriptor. As soon as the file struct is installed in the file descriptor it is accessible by userspace (even if the IOCTL itself hasn't completed yet), this means uninstalling the fd on the error path is not an option, since userspace might already got a reference to the file. Instead anon_inode_getfd() needs to be broken into its individual steps. The allocation of the file struct and file descriptor is done first, then the copy_to_user() is executed and only if it succeeds the file is installed. Since the file struct is reference counted it can not be just freed, but its reference needs to be dropped, which will also call the release() callback, which will free the state attached to the file. So in this case the normal error cleanup path should not be taken. Cc: stable@vger.kernel.org Fixes: d932cd49182f ("gpio: free handles in fringe cases") Signed-off-by: Lars-Peter Clausen Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 57 +++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 45 insertions(+), 12 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 20e09b7c2de3..93ed0e00c578 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -423,6 +424,7 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip) { struct gpiohandle_request handlereq; struct linehandle_state *lh; + struct file *file; int fd, i, ret; if (copy_from_user(&handlereq, ip, sizeof(handlereq))) @@ -499,26 +501,41 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip) i--; lh->numdescs = handlereq.lines; - fd = anon_inode_getfd("gpio-linehandle", - &linehandle_fileops, - lh, - O_RDONLY | O_CLOEXEC); + fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC); if (fd < 0) { ret = fd; goto out_free_descs; } + file = anon_inode_getfile("gpio-linehandle", + &linehandle_fileops, + lh, + O_RDONLY | O_CLOEXEC); + if (IS_ERR(file)) { + ret = PTR_ERR(file); + goto out_put_unused_fd; + } + handlereq.fd = fd; if (copy_to_user(ip, &handlereq, sizeof(handlereq))) { - ret = -EFAULT; - goto out_free_descs; + /* + * fput() will trigger the release() callback, so do not go onto + * the regular error cleanup path here. + */ + fput(file); + put_unused_fd(fd); + return -EFAULT; } + fd_install(fd, file); + dev_dbg(&gdev->dev, "registered chardev handle for %d lines\n", lh->numdescs); return 0; +out_put_unused_fd: + put_unused_fd(fd); out_free_descs: for (; i >= 0; i--) gpiod_free(lh->descs[i]); @@ -721,6 +738,7 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip) struct gpioevent_request eventreq; struct lineevent_state *le; struct gpio_desc *desc; + struct file *file; u32 offset; u32 lflags; u32 eflags; @@ -815,23 +833,38 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip) if (ret) goto out_free_desc; - fd = anon_inode_getfd("gpio-event", - &lineevent_fileops, - le, - O_RDONLY | O_CLOEXEC); + fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC); if (fd < 0) { ret = fd; goto out_free_irq; } + file = anon_inode_getfile("gpio-event", + &lineevent_fileops, + le, + O_RDONLY | O_CLOEXEC); + if (IS_ERR(file)) { + ret = PTR_ERR(file); + goto out_put_unused_fd; + } + eventreq.fd = fd; if (copy_to_user(ip, &eventreq, sizeof(eventreq))) { - ret = -EFAULT; - goto out_free_irq; + /* + * fput() will trigger the release() callback, so do not go onto + * the regular error cleanup path here. + */ + fput(file); + put_unused_fd(fd); + return -EFAULT; } + fd_install(fd, file); + return 0; +out_put_unused_fd: + put_unused_fd(fd); out_free_irq: free_irq(le->irq, le); out_free_desc: -- cgit From c7e9d39831a31682285cc31ddf7dd06c0fe59138 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 25 Oct 2016 10:47:44 +0900 Subject: gpio: of: fix GPIO drivers with multiple gpio_chip for a single node Sylvain Lemieux reports the LPC32xx GPIO driver is broken since commit 762c2e46c059 ("gpio: of: remove of_gpiochip_and_xlate() and struct gg_data"). Probably, gpio-etraxfs.c and gpio-davinci.c are broken too. Those drivers register multiple gpio_chip that are associated to a single OF node, and their own .of_xlate() checks if the passed gpio_chip is valid. Now, the problem is of_find_gpiochip_by_node() returns the first gpio_chip found to match the given node. So, .of_xlate() fails, except for the first GPIO bank. Reverting the commit could be a solution, but I do not want to go back to the mess of struct gg_data. Another solution here is to take the match by a node pointer and the success of .of_xlate(). It is a bit clumsy to call .of_xlate twice; for gpio_chip matching and for really getting the gpio_desc index. Perhaps, our long-term goal might be to convert the drivers to single chip registration, but this commit will solve the problem until then. Fixes: 762c2e46c059 ("gpio: of: remove of_gpiochip_and_xlate() and struct gg_data") Signed-off-by: Masahiro Yamada Reported-by: Sylvain Lemieux Tested-by: David Lechner Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib-of.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index ecad3f0e3b77..193f15d50bba 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -26,14 +26,18 @@ #include "gpiolib.h" -static int of_gpiochip_match_node(struct gpio_chip *chip, void *data) +static int of_gpiochip_match_node_and_xlate(struct gpio_chip *chip, void *data) { - return chip->gpiodev->dev.of_node == data; + struct of_phandle_args *gpiospec = data; + + return chip->gpiodev->dev.of_node == gpiospec->np && + chip->of_xlate(chip, gpiospec, NULL) >= 0; } -static struct gpio_chip *of_find_gpiochip_by_node(struct device_node *np) +static struct gpio_chip *of_find_gpiochip_by_xlate( + struct of_phandle_args *gpiospec) { - return gpiochip_find(np, of_gpiochip_match_node); + return gpiochip_find(gpiospec, of_gpiochip_match_node_and_xlate); } static struct gpio_desc *of_xlate_and_get_gpiod_flags(struct gpio_chip *chip, @@ -79,7 +83,7 @@ struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np, return ERR_PTR(ret); } - chip = of_find_gpiochip_by_node(gpiospec.np); + chip = of_find_gpiochip_by_xlate(&gpiospec); if (!chip) { desc = ERR_PTR(-EPROBE_DEFER); goto out; -- cgit From 091c531b09c151c2d712a8f347009ca3698a2467 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Mon, 17 Oct 2016 18:41:41 -0700 Subject: pinctrl: iproc: Fix iProc and NSP GPIO support Since commit 44a7185c2ae6 ("of/platform: Add common method to populate default bus"), ARM64 platform devices are populated at the arch_initcall_sync level; as a result, the platform_driver_probe calls in both the iProc and NSP GPIO drivers fail with -ENODEV since by that time the platform device was not yet registered. Replace platform_driver_probe with platform_driver_register, that allow the device to be register later Fixes: 44a7185c2ae6 ("of/platform: Add common method to populate default bus") Signed-off-by: Ray Jui Tested-by: Eric Anholt Signed-off-by: Linus Walleij --- drivers/pinctrl/bcm/pinctrl-iproc-gpio.c | 2 +- drivers/pinctrl/bcm/pinctrl-nsp-gpio.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c index 7f7700716398..5d1e505c3c63 100644 --- a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c +++ b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c @@ -844,6 +844,6 @@ static struct platform_driver iproc_gpio_driver = { static int __init iproc_gpio_init(void) { - return platform_driver_probe(&iproc_gpio_driver, iproc_gpio_probe); + return platform_driver_register(&iproc_gpio_driver); } arch_initcall_sync(iproc_gpio_init); diff --git a/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c index 35783db1c10b..c8deb8be1da7 100644 --- a/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c +++ b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c @@ -741,6 +741,6 @@ static struct platform_driver nsp_gpio_driver = { static int __init nsp_gpio_init(void) { - return platform_driver_probe(&nsp_gpio_driver, nsp_gpio_probe); + return platform_driver_register(&nsp_gpio_driver); } arch_initcall_sync(nsp_gpio_init); -- cgit From c35e7790dcbe74b0c85f4c26bbe7e15510422684 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Tue, 18 Oct 2016 09:16:28 +0200 Subject: pinctrl: st: don't specify default interrupt trigger Thanks to 332e99d5ae4 which now alerts of default trigger usage when configuring interrupts. Signed-off-by: Patrice Chotard Acked-by: Peter Griffin Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-st.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c index 99da4cf91031..b7bb37167969 100644 --- a/drivers/pinctrl/pinctrl-st.c +++ b/drivers/pinctrl/pinctrl-st.c @@ -1512,7 +1512,7 @@ static int st_gpiolib_register_bank(struct st_pinctrl *info, if (info->irqmux_base || gpio_irq > 0) { err = gpiochip_irqchip_add(&bank->gpio_chip, &st_gpio_irqchip, 0, handle_simple_irq, - IRQ_TYPE_LEVEL_LOW); + IRQ_TYPE_NONE); if (err) { gpiochip_remove(&bank->gpio_chip); dev_info(dev, "could not add irqchip\n"); -- cgit From 1064a2b41579d77af16164f5dd7bc6948ba1d5be Mon Sep 17 00:00:00 2001 From: Alexandre TORGUE Date: Thu, 20 Oct 2016 15:26:51 +0200 Subject: pinctrl: stm32: remove dependency with interrupt controller This patch allows to probe stm32 pinctrl driver even if no interrupt controller is defined to manage gpio irqs. Signed-off-by: Alexandre TORGUE Signed-off-by: Linus Walleij --- drivers/pinctrl/stm32/pinctrl-stm32.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c index 200667f08c37..efc43711ff5c 100644 --- a/drivers/pinctrl/stm32/pinctrl-stm32.c +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c @@ -1092,9 +1092,11 @@ int stm32_pctl_probe(struct platform_device *pdev) return -EINVAL; } - ret = stm32_pctrl_dt_setup_irq(pdev, pctl); - if (ret) - return ret; + if (of_find_property(np, "interrupt-parent", NULL)) { + ret = stm32_pctrl_dt_setup_irq(pdev, pctl); + if (ret) + return ret; + } for_each_child_of_node(np, child) if (of_property_read_bool(child, "gpio-controller")) -- cgit From 0553d8d0b03ad58f9917460c40a2e2b680f5bfdb Mon Sep 17 00:00:00 2001 From: Alexandre TORGUE Date: Thu, 20 Oct 2016 15:26:52 +0200 Subject: pinctrl: stm32: move gpio irqs binding to optional stm32 pinctrl driver could be probed even if no interrupt controller is defined to manage gpio irqs. Entries related to gpio irq management are moved to optional. Signed-off-by: Alexandre TORGUE Signed-off-by: Linus Walleij --- Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index f9753c416974..b24583aa34c3 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -14,11 +14,6 @@ Required properies: - #size-cells : The value of this property must be 1 - ranges : defines mapping between pin controller node (parent) to gpio-bank node (children). - - interrupt-parent: phandle of the interrupt parent to which the external - GPIO interrupts are forwarded to. - - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node - which includes IRQ mux selection register, and the offset of the IRQ mux - selection register. - pins-are-numbered: Specify the subnodes are using numbered pinmux to specify pins. @@ -37,6 +32,11 @@ Required properties: Optional properties: - reset: : Reference to the reset controller + - interrupt-parent: phandle of the interrupt parent to which the external + GPIO interrupts are forwarded to. + - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node + which includes IRQ mux selection register, and the offset of the IRQ mux + selection register. Example: #include -- cgit From 9999fe5df58773489b9564467b5c8cfb364e0b80 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 18 Oct 2016 14:09:15 -0700 Subject: pinctrl: imx: reset group index on probe Group index is incremented on every new group parsed. Since the field is part of struct imx_pinctrl_soc_info, which is typically a global variable passed by the individual pinctrl-imx.c based driver, it does not get cleared automatically when re-probing the driver. This lead imx_pinctrl_parse_functions passing a group pointer which is outside of the allocated group space on second probe and onwards. Typically this ended up in a NULL pointer dereference when accessing the name field like this: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... PC is at strcmp+0x18/0x44 LR is at imx_dt_node_to_map+0xc4/0x290 Avoid this by setting group_index to 0 on probe. This has been observed when using DEBUG_TEST_DRIVER_REMOVE. Signed-off-by: Stefan Agner Signed-off-by: Linus Walleij --- drivers/pinctrl/freescale/pinctrl-imx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c index 47613201269a..79c4e14a5a75 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx.c +++ b/drivers/pinctrl/freescale/pinctrl-imx.c @@ -687,6 +687,7 @@ static int imx_pinctrl_probe_dt(struct platform_device *pdev, if (!info->functions) return -ENOMEM; + info->group_index = 0; if (flat_funcs) { info->ngroups = of_get_child_count(np); } else { -- cgit From 6227e9f0e9ee988e2cfb425b02ef17f233b1d8d7 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Mon, 31 Oct 2016 15:59:11 +0300 Subject: ARC: Enable PERF_EVENTS in nSIM driven platforms Now when we have properly working performance counters in nSIM even with interrupt support (fix should be a part of upcoming nSIM engineering build 2016.12-005) we may enable perf support by default for all platforms that use nSIM for ARC cores simulation. Note 1: PCT node was missing for some reason in nsimosci.dts while all other nSIM-related .dts files already had PCT node for quite some time, so adding it now. Note 2: All defconfigs were regenerated with "make savedefconfig" which led to some clean-ups in nsimosci_hs_smp_defconfig: CONFIG_FRAMEBUFFER_CONSOLE=y was removed because it is automatically selected now by DRM. Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/axc001.dtsi | 2 +- arch/arc/boot/dts/nsim_700.dts | 2 +- arch/arc/boot/dts/nsimosci.dts | 4 ++++ arch/arc/configs/nsim_700_defconfig | 1 + arch/arc/configs/nsim_hs_defconfig | 1 + arch/arc/configs/nsim_hs_smp_defconfig | 1 + arch/arc/configs/nsimosci_defconfig | 1 + arch/arc/configs/nsimosci_hs_defconfig | 1 + arch/arc/configs/nsimosci_hs_smp_defconfig | 3 +-- 9 files changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi index 6ae2c476ad82..53ce226f77a5 100644 --- a/arch/arc/boot/dts/axc001.dtsi +++ b/arch/arc/boot/dts/axc001.dtsi @@ -71,7 +71,7 @@ reg-io-width = <4>; }; - arcpmu0: pmu { + arcpct0: pct { compatible = "snps,arc700-pct"; }; }; diff --git a/arch/arc/boot/dts/nsim_700.dts b/arch/arc/boot/dts/nsim_700.dts index ce0ccd20b5bf..5ee96b067c08 100644 --- a/arch/arc/boot/dts/nsim_700.dts +++ b/arch/arc/boot/dts/nsim_700.dts @@ -69,7 +69,7 @@ }; }; - arcpmu0: pmu { + arcpct0: pct { compatible = "snps,arc700-pct"; }; }; diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts index bcf603142a33..3c391ba565ed 100644 --- a/arch/arc/boot/dts/nsimosci.dts +++ b/arch/arc/boot/dts/nsimosci.dts @@ -83,5 +83,9 @@ reg = <0xf0003000 0x44>; interrupts = <7>; }; + + arcpct0: pct { + compatible = "snps,arc700-pct"; + }; }; }; diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig index 7314f538847b..b0066a749d4c 100644 --- a/arch/arc/configs/nsim_700_defconfig +++ b/arch/arc/configs/nsim_700_defconfig @@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y diff --git a/arch/arc/configs/nsim_hs_defconfig b/arch/arc/configs/nsim_hs_defconfig index 65ab9fbf83f2..ebe9ebb92933 100644 --- a/arch/arc/configs/nsim_hs_defconfig +++ b/arch/arc/configs/nsim_hs_defconfig @@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y diff --git a/arch/arc/configs/nsim_hs_smp_defconfig b/arch/arc/configs/nsim_hs_smp_defconfig index 3b3990cddbe1..4bde43278be6 100644 --- a/arch/arc/configs/nsim_hs_smp_defconfig +++ b/arch/arc/configs/nsim_hs_smp_defconfig @@ -12,6 +12,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig index 98cf20933bbb..f6fb3d26557e 100644 --- a/arch/arc/configs/nsimosci_defconfig +++ b/arch/arc/configs/nsimosci_defconfig @@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y diff --git a/arch/arc/configs/nsimosci_hs_defconfig b/arch/arc/configs/nsimosci_hs_defconfig index ddf8b96d494e..b9f0fe00044b 100644 --- a/arch/arc/configs/nsimosci_hs_defconfig +++ b/arch/arc/configs/nsimosci_hs_defconfig @@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y diff --git a/arch/arc/configs/nsimosci_hs_smp_defconfig b/arch/arc/configs/nsimosci_hs_smp_defconfig index ceb90745326e..6da71ba253a9 100644 --- a/arch/arc/configs/nsimosci_hs_smp_defconfig +++ b/arch/arc/configs/nsimosci_hs_smp_defconfig @@ -10,6 +10,7 @@ CONFIG_IKCONFIG_PROC=y # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/" +CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y CONFIG_MODULES=y @@ -34,7 +35,6 @@ CONFIG_INET=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y @@ -72,7 +72,6 @@ CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HWMON is not set CONFIG_DRM=y CONFIG_DRM_ARCPGU=y -CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set -- cgit From 8f6d9eb2a3f38f1acd04efa0aeb8b81f5373c923 Mon Sep 17 00:00:00 2001 From: Noam Camus Date: Sun, 30 Oct 2016 09:48:42 +0200 Subject: ARC: [SMP] avoid overriding present cpumask At smp_prepare_cpus() we set present cpu mask as part of init for all CPUs at range [0-max_cpus]. This is done without checking if this mask is already being set. At platform of eznps this mask is already being initialized at smp_init_cpus() by using hook plat_smp_ops.init_early_smp(). So to avoid overriding of present cpu mask we check the number of bits which are set in this mask. At the begin only bit for boot CPU is set so if number of bits already set is no more than one we can be assure that there is no overriding of this mask. Signed-off-by: Noam Camus Signed-off-by: Vineet Gupta --- arch/arc/kernel/smp.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index f183cc648851..f00029e9cbe4 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -67,11 +67,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus) int i; /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. + * if platform didn't set the present map already, do it now + * boot cpu is set to present already by init/main.c */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); + if (num_present_cpus() <= 1) { + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + } } void __init smp_cpus_done(unsigned int max_cpus) -- cgit From fcdefccac976ee51dd6071832b842d8fb41c479c Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Mon, 31 Oct 2016 13:32:03 -0400 Subject: bgmac: stop clearing DMA receive control register right after it is set Current bgmac code initializes some DMA settings in the receive control register for some hardware and then immediately clears those settings. Not clearing those settings results in ~420Mbps *improvement* in throughput; this system can now receive frames at line-rate on Broadcom 5871x hardware compared to ~520Mbps today. I also tested a few other values but found there to be no discernible difference in CPU utilization even if burst size and prefetching values are different. On the hardware tested there was no need to keep the code that cleared all but bits 16-17, but since there is a wide variety of hardware that used this driver (I did not look at all hardware docs for hardware using this IP block), I find it wise to move this call up and clear bits just after reading the default value from the hardware rather than completely removing it. This is a good candidate for -stable >=3.14 since that is when the code that was supposed to improve performance (but did not) was introduced. Signed-off-by: Andy Gospodarek Fixes: 56ceecde1f29 ("bgmac: initialize the DMA controller of core...") Cc: Hauke Mehrtens Acked-by: Hauke Mehrtens Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 31ca204b38d2..91cbf92de971 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -307,6 +307,10 @@ static void bgmac_dma_rx_enable(struct bgmac *bgmac, u32 ctl; ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL); + + /* preserve ONLY bits 16-17 from current hardware value */ + ctl &= BGMAC_DMA_RX_ADDREXT_MASK; + if (bgmac->feature_flags & BGMAC_FEAT_RX_MASK_SETUP) { ctl &= ~BGMAC_DMA_RX_BL_MASK; ctl |= BGMAC_DMA_RX_BL_128 << BGMAC_DMA_RX_BL_SHIFT; @@ -317,7 +321,6 @@ static void bgmac_dma_rx_enable(struct bgmac *bgmac, ctl &= ~BGMAC_DMA_RX_PT_MASK; ctl |= BGMAC_DMA_RX_PT_1 << BGMAC_DMA_RX_PT_SHIFT; } - ctl &= BGMAC_DMA_RX_ADDREXT_MASK; ctl |= BGMAC_DMA_RX_ENABLE; ctl |= BGMAC_DMA_RX_PARITY_DISABLE; ctl |= BGMAC_DMA_RX_OVERFLOW_CONT; -- cgit From b0a6af8b34c9ad20894aa46f85f4bf59d444f286 Mon Sep 17 00:00:00 2001 From: Peter Wu Date: Mon, 31 Oct 2016 23:48:22 +0100 Subject: drm/nouveau/acpi: fix check for power resources support Check whether the kernel really supports power resources for a device, otherwise the power might not be removed when the device is runtime suspended (DSM should still work in these cases where PR does not). This is a workaround for a problem where ACPICA and Windows 10 differ in behavior. ACPICA does not correctly enumerate power resources within a conditional block (due to delayed execution of such blocks) and as a result power_resources is set to false even if _PR3 exists. Fixes: 692a17dcc292 ("drm/nouveau/acpi: fix lockup with PCIe runtime PM") Link: https://bugs.freedesktop.org/show_bug.cgi?id=98398 Reported-and-tested-by: Rick Kerkhof Reviewed-by: Mika Westerberg Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Peter Wu Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nouveau_acpi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index dc57b628e074..193573d191e5 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -240,7 +240,8 @@ static bool nouveau_pr3_present(struct pci_dev *pdev) if (!parent_adev) return false; - return acpi_has_method(parent_adev->handle, "_PR3"); + return parent_adev->power.flags.power_resources && + acpi_has_method(parent_adev->handle, "_PR3"); } static void nouveau_dsm_pci_probe(struct pci_dev *pdev, acpi_handle *dhandle_out, -- cgit From c25badc9ceb612c6cc227a6fc4b0aaf678e3bcf9 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Wed, 19 Oct 2016 15:53:52 -0700 Subject: cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-set When converting to a shared library in ac5a181d065d ("cpupower: Add cpuidle parts into library"), cpu_freq_cpu_exists() was converted to cpupower_is_cpu_online(). cpu_req_cpu_exists() returned 0 on success and -ENOSYS on failure whereas cpupower_is_cpu_online returns 1 on success. Check for the correct return value in cpufreq-set. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1374212 Fixes: ac5a181d065d (cpupower: Add cpuidle parts into library) Reported-by: Julian Seward Signed-off-by: Laura Abbott Acked-by: Thomas Renninger Cc: 4.7+ # 4.7+ Signed-off-by: Rafael J. Wysocki --- tools/power/cpupower/utils/cpufreq-set.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/tools/power/cpupower/utils/cpufreq-set.c b/tools/power/cpupower/utils/cpufreq-set.c index b4bf76971dc9..1eef0aed6423 100644 --- a/tools/power/cpupower/utils/cpufreq-set.c +++ b/tools/power/cpupower/utils/cpufreq-set.c @@ -296,7 +296,7 @@ int cmd_freq_set(int argc, char **argv) struct cpufreq_affected_cpus *cpus; if (!bitmask_isbitset(cpus_chosen, cpu) || - cpupower_is_cpu_online(cpu)) + cpupower_is_cpu_online(cpu) != 1) continue; cpus = cpufreq_get_related_cpus(cpu); @@ -316,10 +316,7 @@ int cmd_freq_set(int argc, char **argv) cpu <= bitmask_last(cpus_chosen); cpu++) { if (!bitmask_isbitset(cpus_chosen, cpu) || - cpupower_is_cpu_online(cpu)) - continue; - - if (cpupower_is_cpu_online(cpu) != 1) + cpupower_is_cpu_online(cpu) != 1) continue; printf(_("Setting cpu: %d\n"), cpu); -- cgit From 405c0759712f57b680f66aee9c55cd06ad1cbdef Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Mon, 31 Oct 2016 08:11:43 -0700 Subject: fork: Add task stack refcounting sanity check and prevent premature task stack freeing If something goes wrong with task stack refcounting and a stack refcount hits zero too early, warn and leak it rather than potentially freeing it early (and silently). Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/f29119c783a9680a4b4656e751b6123917ace94b.1477926663.git.luto@kernel.org Signed-off-by: Ingo Molnar --- kernel/fork.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/fork.c b/kernel/fork.c index 623259fc794d..997ac1d584f7 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -315,6 +315,9 @@ static void account_kernel_stack(struct task_struct *tsk, int account) static void release_task_stack(struct task_struct *tsk) { + if (WARN_ON(tsk->state != TASK_DEAD)) + return; /* Better to leak the stack than to free prematurely */ + account_kernel_stack(tsk, -1); arch_release_thread_stack(tsk->stack); free_thread_stack(tsk); @@ -1862,6 +1865,7 @@ bad_fork_cleanup_count: atomic_dec(&p->cred->user->processes); exit_creds(p); bad_fork_free: + p->state = TASK_DEAD; put_task_stack(p); free_task(p); fork_out: -- cgit From fd9afd3cbe404998d732be6cc798f749597c5114 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 1 Nov 2016 13:20:22 +0200 Subject: usb: gadget: u_ether: remove interrupt throttling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to Dave Miller "the networking stack has a hard requirement that all SKBs which are transmitted must have their completion signalled in a fininte amount of time. This is because, until the SKB is freed by the driver, it holds onto socket, netfilter, and other subsystem resources." In summary, this means that using TX IRQ throttling for the networking gadgets is, at least, complex and we should avoid it for the time being. Cc: Reported-by: Ville Syrjälä Tested-by: Ville Syrjälä Suggested-by: David Miller Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/u_ether.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index fe1811650dbc..5d1bd13a56c1 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -588,14 +588,6 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb, req->length = length; - /* throttle high/super speed IRQ rate back slightly */ - if (gadget_is_dualspeed(dev->gadget)) - req->no_interrupt = (((dev->gadget->speed == USB_SPEED_HIGH || - dev->gadget->speed == USB_SPEED_SUPER)) && - !list_empty(&dev->tx_reqs)) - ? ((atomic_read(&dev->tx_qlen) % dev->qmult) != 0) - : 0; - retval = usb_ep_queue(in, req, GFP_ATOMIC); switch (retval) { default: -- cgit From d6124b409ca33c100170ffde51cd8dff761454a1 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 1 Nov 2016 12:13:31 +0100 Subject: uwb: fix device reference leaks This subsystem consistently fails to drop the device reference taken by class_find_device(). Note that some of these lookup functions already take a reference to the returned data, while others claim no reference is needed (or does not seem need one). Fixes: 183b9b592a62 ("uwb: add the UWB stack (core files)") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/uwb/lc-rc.c | 16 +++++++++++++--- drivers/uwb/pal.c | 2 ++ 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/uwb/lc-rc.c b/drivers/uwb/lc-rc.c index d059ad4d0dbd..97ee1b46db69 100644 --- a/drivers/uwb/lc-rc.c +++ b/drivers/uwb/lc-rc.c @@ -56,8 +56,11 @@ static struct uwb_rc *uwb_rc_find_by_index(int index) struct uwb_rc *rc = NULL; dev = class_find_device(&uwb_rc_class, NULL, &index, uwb_rc_index_match); - if (dev) + if (dev) { rc = dev_get_drvdata(dev); + put_device(dev); + } + return rc; } @@ -467,7 +470,9 @@ struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *target_rc) if (dev) { rc = dev_get_drvdata(dev); __uwb_rc_get(rc); + put_device(dev); } + return rc; } EXPORT_SYMBOL_GPL(__uwb_rc_try_get); @@ -520,8 +525,11 @@ struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *grandpa_dev) dev = class_find_device(&uwb_rc_class, NULL, grandpa_dev, find_rc_grandpa); - if (dev) + if (dev) { rc = dev_get_drvdata(dev); + put_device(dev); + } + return rc; } EXPORT_SYMBOL_GPL(uwb_rc_get_by_grandpa); @@ -553,8 +561,10 @@ struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *addr) struct uwb_rc *rc = NULL; dev = class_find_device(&uwb_rc_class, NULL, addr, find_rc_dev); - if (dev) + if (dev) { rc = dev_get_drvdata(dev); + put_device(dev); + } return rc; } diff --git a/drivers/uwb/pal.c b/drivers/uwb/pal.c index c1304b8d4985..678e93741ae1 100644 --- a/drivers/uwb/pal.c +++ b/drivers/uwb/pal.c @@ -97,6 +97,8 @@ static bool uwb_rc_class_device_exists(struct uwb_rc *target_rc) dev = class_find_device(&uwb_rc_class, NULL, target_rc, find_rc); + put_device(dev); + return (dev != NULL); } -- cgit From f6b2db084b65b9dc0f910bc48d5f77c0e5166dc6 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 1 Nov 2016 00:01:59 -0700 Subject: vmbus: make sysfs names consistent with PCI In commit 9a56e5d6a0ba ("Drivers: hv: make VMBus bus ids persistent") the name of vmbus devices in sysfs changed to be (in 4.9-rc1): /sys/bus/vmbus/vmbus-6aebe374-9ba0-11e6-933c-00259086b36b The prefix ("vmbus-") is redundant and differs from how PCI is represented in sysfs. Therefore simplify to: /sys/bus/vmbus/6aebe374-9ba0-11e6-933c-00259086b36b Please merge this before 4.9 is released and the old format has to live forever. Signed-off-by: Stephen Hemminger Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/vmbus_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index a259e18d22d5..0276d2ef06ee 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -961,7 +961,7 @@ int vmbus_device_register(struct hv_device *child_device_obj) { int ret = 0; - dev_set_name(&child_device_obj->device, "vmbus-%pUl", + dev_set_name(&child_device_obj->device, "%pUl", child_device_obj->channel->offermsg.offer.if_instance.b); child_device_obj->device.bus = &hv_bus; -- cgit From b5a4a3eb4ec7382780aa153224780b9ecdc76ceb Mon Sep 17 00:00:00 2001 From: Iyappan Subramanian Date: Mon, 31 Oct 2016 16:00:26 -0700 Subject: drivers: net: xgene: fix: Disable coalescing on v1 hardware Since ethernet v1 hardware has a bug related to coalescing, disabling this feature. Signed-off-by: Iyappan Subramanian Signed-off-by: Toan Le Signed-off-by: David S. Miller --- drivers/net/ethernet/apm/xgene/xgene_enet_hw.c | 12 ------------ drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 3 ++- 2 files changed, 2 insertions(+), 13 deletions(-) diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c index c481f104a8fe..5390ae89136c 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c @@ -204,17 +204,6 @@ static u32 xgene_enet_ring_len(struct xgene_enet_desc_ring *ring) return num_msgs; } -static void xgene_enet_setup_coalescing(struct xgene_enet_desc_ring *ring) -{ - u32 data = 0x7777; - - xgene_enet_ring_wr32(ring, CSR_PBM_COAL, 0x8e); - xgene_enet_ring_wr32(ring, CSR_PBM_CTICK1, data); - xgene_enet_ring_wr32(ring, CSR_PBM_CTICK2, data << 16); - xgene_enet_ring_wr32(ring, CSR_THRESHOLD0_SET1, 0x40); - xgene_enet_ring_wr32(ring, CSR_THRESHOLD1_SET1, 0x80); -} - void xgene_enet_parse_error(struct xgene_enet_desc_ring *ring, struct xgene_enet_pdata *pdata, enum xgene_enet_err_code status) @@ -929,5 +918,4 @@ struct xgene_ring_ops xgene_ring1_ops = { .clear = xgene_enet_clear_ring, .wr_cmd = xgene_enet_wr_cmd, .len = xgene_enet_ring_len, - .coalesce = xgene_enet_setup_coalescing, }; diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c index 429f18fc5503..8158d4698734 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c @@ -1188,7 +1188,8 @@ static int xgene_enet_create_desc_rings(struct net_device *ndev) tx_ring->dst_ring_num = xgene_enet_dst_ring_num(cp_ring); } - pdata->ring_ops->coalesce(pdata->tx_ring[0]); + if (pdata->ring_ops->coalesce) + pdata->ring_ops->coalesce(pdata->tx_ring[0]); pdata->tx_qcnt_hi = pdata->tx_ring[0]->slots - 128; return 0; -- cgit From f126df8503275facc96dd05a818086afbb89b77d Mon Sep 17 00:00:00 2001 From: Iyappan Subramanian Date: Mon, 31 Oct 2016 16:00:27 -0700 Subject: drivers: net: xgene: fix: Coalescing values for v2 hardware Changing the interrupt trigger region id to 2 and the corresponding threshold set0/set1 values to 8/16. Signed-off-by: Iyappan Subramanian Signed-off-by: Toan Le Signed-off-by: David S. Miller --- drivers/net/ethernet/apm/xgene/xgene_enet_hw.h | 2 ++ drivers/net/ethernet/apm/xgene/xgene_enet_ring2.c | 12 +++++++----- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h index 8456337a237d..06e598c8bc16 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h @@ -55,8 +55,10 @@ enum xgene_enet_rm { #define PREFETCH_BUF_EN BIT(21) #define CSR_RING_ID_BUF 0x000c #define CSR_PBM_COAL 0x0014 +#define CSR_PBM_CTICK0 0x0018 #define CSR_PBM_CTICK1 0x001c #define CSR_PBM_CTICK2 0x0020 +#define CSR_PBM_CTICK3 0x0024 #define CSR_THRESHOLD0_SET1 0x0030 #define CSR_THRESHOLD1_SET1 0x0034 #define CSR_RING_NE_INT_MODE 0x017c diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_ring2.c b/drivers/net/ethernet/apm/xgene/xgene_enet_ring2.c index 2b76732add5d..af51dd5844ce 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_ring2.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_ring2.c @@ -30,7 +30,7 @@ static void xgene_enet_ring_init(struct xgene_enet_desc_ring *ring) ring_cfg[0] |= SET_VAL(X2_INTLINE, ring->id & RING_BUFNUM_MASK); ring_cfg[3] |= SET_BIT(X2_DEQINTEN); } - ring_cfg[0] |= SET_VAL(X2_CFGCRID, 1); + ring_cfg[0] |= SET_VAL(X2_CFGCRID, 2); addr >>= 8; ring_cfg[2] |= QCOHERENT | SET_VAL(RINGADDRL, addr); @@ -192,13 +192,15 @@ static u32 xgene_enet_ring_len(struct xgene_enet_desc_ring *ring) static void xgene_enet_setup_coalescing(struct xgene_enet_desc_ring *ring) { - u32 data = 0x7777; + u32 data = 0x77777777; xgene_enet_ring_wr32(ring, CSR_PBM_COAL, 0x8e); + xgene_enet_ring_wr32(ring, CSR_PBM_CTICK0, data); xgene_enet_ring_wr32(ring, CSR_PBM_CTICK1, data); - xgene_enet_ring_wr32(ring, CSR_PBM_CTICK2, data << 16); - xgene_enet_ring_wr32(ring, CSR_THRESHOLD0_SET1, 0x40); - xgene_enet_ring_wr32(ring, CSR_THRESHOLD1_SET1, 0x80); + xgene_enet_ring_wr32(ring, CSR_PBM_CTICK2, data); + xgene_enet_ring_wr32(ring, CSR_PBM_CTICK3, data); + xgene_enet_ring_wr32(ring, CSR_THRESHOLD0_SET1, 0x08); + xgene_enet_ring_wr32(ring, CSR_THRESHOLD1_SET1, 0x10); } struct xgene_ring_ops xgene_ring2_ops = { -- cgit From 7bb9f731d1026bd48b84cee7853cba7f5678193c Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 31 Oct 2016 18:18:42 -0500 Subject: net: qcom/emac: use correct value for SGMII_LN_UCDR_SO_GAIN_MODE0 The documentation says that SGMII_LN_UCDR_SO_GAIN_MODE0 should be set to 0, not 6, on the Qualcomm Technologies QDF2432. Signed-off-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c index 75c1b530e39e..72fe343c7a36 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c @@ -421,7 +421,7 @@ static const struct emac_reg_write sgmii_v2_laned[] = { /* CDR Settings */ {EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0, UCDR_STEP_BY_TWO_MODE0 | UCDR_xO_GAIN_MODE(10)}, - {EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(6)}, + {EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(0)}, {EMAC_SGMII_LN_UCDR_SO_CONFIG, UCDR_ENABLE | UCDR_SO_SATURATION(12)}, /* TX/RX Settings */ -- cgit From e7947ea770d0de434d38a0f823e660d3fd4bebb5 Mon Sep 17 00:00:00 2001 From: Isaac Boukris Date: Tue, 1 Nov 2016 02:41:35 +0200 Subject: unix: escape all null bytes in abstract unix domain socket Abstract unix domain socket may embed null characters, these should be translated to '@' when printed out to proc the same way the null prefix is currently being translated. This helps for tools such as netstat, lsof and the proc based implementation in ss to show all the significant bytes of the name (instead of getting cut at the first null occurrence). Signed-off-by: Isaac Boukris Signed-off-by: David S. Miller --- net/unix/af_unix.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 145082e2ba36..5d1c14a2f268 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -2812,7 +2812,8 @@ static int unix_seq_show(struct seq_file *seq, void *v) i++; } for ( ; i < len; i++) - seq_putc(seq, u->addr->name->sun_path[i]); + seq_putc(seq, u->addr->name->sun_path[i] ?: + '@'); } unix_state_unlock(s); seq_putc(seq, '\n'); -- cgit From 42fb18fd5852dba9c43ac008558e4bc8062bda57 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Tue, 1 Nov 2016 08:10:53 +0100 Subject: net/mlx5: Simplify a test 'create_root_ns()' does not return an error pointer, so the test can be simplified to be more consistent. Signed-off-by: Christophe JAILLET Acked-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index 89696048b045..914e5466f729 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -1690,7 +1690,7 @@ static int init_root_ns(struct mlx5_flow_steering *steering) { steering->root_ns = create_root_ns(steering, FS_FT_NIC_RX); - if (IS_ERR_OR_NULL(steering->root_ns)) + if (!steering->root_ns) goto cleanup; if (init_root_tree(steering, &root_fs, &steering->root_ns->ns.node)) -- cgit From b9b84fc07dbc6ac74d85f1b1a401b41c403fecb1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 1 Nov 2016 10:50:01 +0000 Subject: net: mv643xx_eth: ensure coalesce settings survive read-modify-write The coalesce settings behave badly when changing just one value: ... # ethtool -c eth0 rx-usecs: 249 ... # ethtool -C eth0 tx-usecs 250 ... # ethtool -c eth0 rx-usecs: 248 This occurs due to rounding errors when calculating the microseconds value - the divisons round down. This causes (eg) the rx-usecs to decrease by one every time the tx-usecs value is set as per the above. Fix this by making the divison round-to-nearest. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mv643xx_eth.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index bf5cc55ba24c..5b12022adf1f 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -1381,6 +1381,7 @@ static unsigned int get_rx_coal(struct mv643xx_eth_private *mp) temp = (val & 0x003fff00) >> 8; temp *= 64000000; + temp += mp->t_clk / 2; do_div(temp, mp->t_clk); return (unsigned int)temp; @@ -1417,6 +1418,7 @@ static unsigned int get_tx_coal(struct mv643xx_eth_private *mp) temp = (rdlp(mp, TX_FIFO_URGENT_THRESHOLD) & 0x3fff0) >> 4; temp *= 64000000; + temp += mp->t_clk / 2; do_div(temp, mp->t_clk); return (unsigned int)temp; -- cgit From 8ec4b736d709562193566156c0dd40e327df2cbb Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 29 Oct 2016 08:10:03 -0200 Subject: Documentation/ABI: ibm_rtl: The "What:" fields are incomplete The "What:" field at the ABI should describe the location of the ABI, e. g. the position under a mounted sysfs. However, this file has only the basename without the path. Fix it. Cc: Vernon Mauery Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Darren Hart --- Documentation/ABI/testing/sysfs-devices-system-ibm-rtl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl b/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl index b82deeaec314..470def06ab0a 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl +++ b/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl @@ -1,4 +1,4 @@ -What: state +What: /sys/devices/system/ibm_rtl/state Date: Sep 2010 KernelVersion: 2.6.37 Contact: Vernon Mauery @@ -10,7 +10,7 @@ Description: The state file allows a means by which to change in and Users: The ibm-prtm userspace daemon uses this interface. -What: version +What: /sys/devices/system/ibm_rtl/version Date: Sep 2010 KernelVersion: 2.6.37 Contact: Vernon Mauery -- cgit From 1fdd14279eab2e9f79745631379f0c53cb8f9a5a Mon Sep 17 00:00:00 2001 From: "tang.junhui" Date: Fri, 28 Oct 2016 15:54:07 +0800 Subject: scsi: scsi_dh_alua: fix missing kref_put() in alua_rtpg_work() Reference count of pg leaks in alua_rtpg_work() since kref_put() is not called to decrease the reference count of pg when the condition pg->rtpg_sdev==NULL satisfied (actually it is easy to satisfy), it would cause memory of pg leakage. Signed-off-by: tang.junhui Cc: Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/device_handler/scsi_dh_alua.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index 241829e59668..f375167f16ea 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -793,6 +793,7 @@ static void alua_rtpg_work(struct work_struct *work) WARN_ON(pg->flags & ALUA_PG_RUN_RTPG); WARN_ON(pg->flags & ALUA_PG_RUN_STPG); spin_unlock_irqrestore(&pg->lock, flags); + kref_put(&pg->kref, release_port_group); return; } if (pg->flags & ALUA_SYNC_STPG) -- cgit From 6d3a56ed098566bc83d6c2afa74b4199c12ea074 Mon Sep 17 00:00:00 2001 From: Sreekanth Reddy Date: Fri, 28 Oct 2016 10:09:12 +0530 Subject: scsi: mpt3sas: Fix for block device of raid exists even after deleting raid disk While merging mpt3sas & mpt2sas code, we added the is_warpdrive check condition on the wrong line --------------------------------------------------------------------------- scsih_target_alloc(struct scsi_target *starget) sas_target_priv_data->handle = raid_device->handle; sas_target_priv_data->sas_address = raid_device->wwid; sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; - raid_device->starget = starget; + sas_target_priv_data->raid_device = raid_device; + if (ioc->is_warpdrive) + raid_device->starget = starget; } spin_unlock_irqrestore(&ioc->raid_device_lock, flags); return 0; ------------------------------------------------------------------------------ That check should be for the line sas_target_priv_data->raid_device = raid_device; Due to above hunk, we are not initializing raid_device's starget for raid volumes, and so during raid disk deletion driver is not calling scsi_remove_target() API as driver observes starget field of raid_device's structure as NULL. Signed-off-by: Sreekanth Reddy Cc: # v4.4+ Fixes: 7786ab6aff9 ("mpt3sas: Ported WarpDrive product SSS6200 support") Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 209a969a979d..8aa769a2d919 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -1273,9 +1273,9 @@ scsih_target_alloc(struct scsi_target *starget) sas_target_priv_data->handle = raid_device->handle; sas_target_priv_data->sas_address = raid_device->wwid; sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; - sas_target_priv_data->raid_device = raid_device; if (ioc->is_warpdrive) - raid_device->starget = starget; + sas_target_priv_data->raid_device = raid_device; + raid_device->starget = starget; } spin_unlock_irqrestore(&ioc->raid_device_lock, flags); return 0; -- cgit From aac173e9618faadf8f92af6cc05e64f7acc64d79 Mon Sep 17 00:00:00 2001 From: David Jeffery Date: Fri, 28 Oct 2016 12:27:26 -0400 Subject: scsi: vmw_pvscsi: return SUCCESS for successful command aborts The vmw_pvscsi driver reports most successful aborts as FAILED to the scsi error handler. This is do to a misunderstanding of how completion_done() works and its interaction with a successful wait using wait_for_completion_timeout(). The vmw_pvscsi driver is expecting completion_done() to always return true if complete() has been called on the completion structure. But completion_done() returns true after complete() has been called only if no function like wait_for_completion_timeout() has seen the completion and cleared it as part of successfully waiting for the completion. Instead of using completion_done(), vmw_pvscsi should just use the return value from wait_for_completion_timeout() to know if the wait timed out or not. [mkp: bumped driver version per request] Signed-off-by: David Jeffery Reviewed-by: Laurence Oberman Reviewed-by: Ewan D. Milne Acked-by: Jim Gill Signed-off-by: Martin K. Petersen --- drivers/scsi/vmw_pvscsi.c | 5 +++-- drivers/scsi/vmw_pvscsi.h | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c index 4a0d3cdc607c..15ca09cd16f3 100644 --- a/drivers/scsi/vmw_pvscsi.c +++ b/drivers/scsi/vmw_pvscsi.c @@ -793,6 +793,7 @@ static int pvscsi_abort(struct scsi_cmnd *cmd) unsigned long flags; int result = SUCCESS; DECLARE_COMPLETION_ONSTACK(abort_cmp); + int done; scmd_printk(KERN_DEBUG, cmd, "task abort on host %u, %p\n", adapter->host->host_no, cmd); @@ -824,10 +825,10 @@ static int pvscsi_abort(struct scsi_cmnd *cmd) pvscsi_abort_cmd(adapter, ctx); spin_unlock_irqrestore(&adapter->hw_lock, flags); /* Wait for 2 secs for the completion. */ - wait_for_completion_timeout(&abort_cmp, msecs_to_jiffies(2000)); + done = wait_for_completion_timeout(&abort_cmp, msecs_to_jiffies(2000)); spin_lock_irqsave(&adapter->hw_lock, flags); - if (!completion_done(&abort_cmp)) { + if (!done) { /* * Failed to abort the command, unmark the fact that it * was requested to be aborted. diff --git a/drivers/scsi/vmw_pvscsi.h b/drivers/scsi/vmw_pvscsi.h index c097d2ccbde3..d41292ef85f2 100644 --- a/drivers/scsi/vmw_pvscsi.h +++ b/drivers/scsi/vmw_pvscsi.h @@ -26,7 +26,7 @@ #include -#define PVSCSI_DRIVER_VERSION_STRING "1.0.6.0-k" +#define PVSCSI_DRIVER_VERSION_STRING "1.0.7.0-k" #define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128 -- cgit From df3d422cbac685da882e4c239dfda07de33d431b Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 1 Nov 2016 08:19:57 -0600 Subject: scsi: scsi_dh_alua: Fix a reference counting bug The code at the end of alua_rtpg_work() is as follows: scsi_device_put(sdev); kref_put(&pg->kref, release_port_group); In other words, alua_rtpg_queue() must hold an sdev reference and a pg reference before queueing rtpg work. If no rtpg work is queued no additional references should be held when alua_rtpg_queue() returns. If no rtpg work is queued, ensure that alua_rtpg_queue() only gives up the sdev reference if that reference was obtained by the same alua_rtpg_queue() call. Signed-off-by: Bart Van Assche Reported-by: Tang Junhui Cc: Hannes Reinecke Cc: Tang Junhui Cc: Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/device_handler/scsi_dh_alua.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index f375167f16ea..7bb20684e9fa 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -891,6 +891,7 @@ static void alua_rtpg_queue(struct alua_port_group *pg, /* Do not queue if the worker is already running */ if (!(pg->flags & ALUA_PG_RUNNING)) { kref_get(&pg->kref); + sdev = NULL; start_queue = 1; } } @@ -902,7 +903,8 @@ static void alua_rtpg_queue(struct alua_port_group *pg, if (start_queue && !queue_delayed_work(alua_wq, &pg->rtpg_work, msecs_to_jiffies(ALUA_RTPG_DELAY_MSECS))) { - scsi_device_put(sdev); + if (sdev) + scsi_device_put(sdev); kref_put(&pg->kref, release_port_group); } } -- cgit From 812d47889a8e418d7bea9bec383581a34c19183e Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 19 Oct 2016 15:03:41 -0600 Subject: gpio/mvebu: Use irq_domain_add_linear This fixes the irq allocation in this driver to not print: irq: Cannot allocate irq_descs @ IRQ34, assuming pre-allocated irq: Cannot allocate irq_descs @ IRQ66, assuming pre-allocated Which happens because the driver already called irq_alloc_descs() and so the change to use irq_domain_add_simple resulted in calling irq_alloc_descs() twice. Modernize the irq allocation in this driver to use the irq_domain_add_linear flow directly and eliminate the use of irq_domain_add_simple/legacy Fixes: ce931f571b6d ("gpio/mvebu: convert to use irq_domain_add_simple()") Signed-off-by: Jason Gunthorpe Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mvebu.c | 92 ++++++++++++++++++++++------------------------- 1 file changed, 43 insertions(+), 49 deletions(-) diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index cd5dc27320a2..1ed6132b993c 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -293,10 +293,10 @@ static void mvebu_gpio_irq_ack(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct mvebu_gpio_chip *mvchip = gc->private; - u32 mask = ~(1 << (d->irq - gc->irq_base)); + u32 mask = d->mask; irq_gc_lock(gc); - writel_relaxed(mask, mvebu_gpioreg_edge_cause(mvchip)); + writel_relaxed(~mask, mvebu_gpioreg_edge_cause(mvchip)); irq_gc_unlock(gc); } @@ -305,7 +305,7 @@ static void mvebu_gpio_edge_irq_mask(struct irq_data *d) struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct mvebu_gpio_chip *mvchip = gc->private; struct irq_chip_type *ct = irq_data_get_chip_type(d); - u32 mask = 1 << (d->irq - gc->irq_base); + u32 mask = d->mask; irq_gc_lock(gc); ct->mask_cache_priv &= ~mask; @@ -319,8 +319,7 @@ static void mvebu_gpio_edge_irq_unmask(struct irq_data *d) struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct mvebu_gpio_chip *mvchip = gc->private; struct irq_chip_type *ct = irq_data_get_chip_type(d); - - u32 mask = 1 << (d->irq - gc->irq_base); + u32 mask = d->mask; irq_gc_lock(gc); ct->mask_cache_priv |= mask; @@ -333,8 +332,7 @@ static void mvebu_gpio_level_irq_mask(struct irq_data *d) struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct mvebu_gpio_chip *mvchip = gc->private; struct irq_chip_type *ct = irq_data_get_chip_type(d); - - u32 mask = 1 << (d->irq - gc->irq_base); + u32 mask = d->mask; irq_gc_lock(gc); ct->mask_cache_priv &= ~mask; @@ -347,8 +345,7 @@ static void mvebu_gpio_level_irq_unmask(struct irq_data *d) struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct mvebu_gpio_chip *mvchip = gc->private; struct irq_chip_type *ct = irq_data_get_chip_type(d); - - u32 mask = 1 << (d->irq - gc->irq_base); + u32 mask = d->mask; irq_gc_lock(gc); ct->mask_cache_priv |= mask; @@ -462,7 +459,7 @@ static void mvebu_gpio_irq_handler(struct irq_desc *desc) for (i = 0; i < mvchip->chip.ngpio; i++) { int irq; - irq = mvchip->irqbase + i; + irq = irq_find_mapping(mvchip->domain, i); if (!(cause & (1 << i))) continue; @@ -655,6 +652,7 @@ static int mvebu_gpio_probe(struct platform_device *pdev) struct irq_chip_type *ct; struct clk *clk; unsigned int ngpios; + bool have_irqs; int soc_variant; int i, cpu, id; int err; @@ -665,6 +663,9 @@ static int mvebu_gpio_probe(struct platform_device *pdev) else soc_variant = MVEBU_GPIO_SOC_VARIANT_ORION; + /* Some gpio controllers do not provide irq support */ + have_irqs = of_irq_count(np) != 0; + mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip), GFP_KERNEL); if (!mvchip) @@ -697,7 +698,8 @@ static int mvebu_gpio_probe(struct platform_device *pdev) mvchip->chip.get = mvebu_gpio_get; mvchip->chip.direction_output = mvebu_gpio_direction_output; mvchip->chip.set = mvebu_gpio_set; - mvchip->chip.to_irq = mvebu_gpio_to_irq; + if (have_irqs) + mvchip->chip.to_irq = mvebu_gpio_to_irq; mvchip->chip.base = id * MVEBU_MAX_GPIO_PER_BANK; mvchip->chip.ngpio = ngpios; mvchip->chip.can_sleep = false; @@ -758,34 +760,30 @@ static int mvebu_gpio_probe(struct platform_device *pdev) devm_gpiochip_add_data(&pdev->dev, &mvchip->chip, mvchip); /* Some gpio controllers do not provide irq support */ - if (!of_irq_count(np)) + if (!have_irqs) return 0; - /* Setup the interrupt handlers. Each chip can have up to 4 - * interrupt handlers, with each handler dealing with 8 GPIO - * pins. */ - for (i = 0; i < 4; i++) { - int irq = platform_get_irq(pdev, i); - - if (irq < 0) - continue; - irq_set_chained_handler_and_data(irq, mvebu_gpio_irq_handler, - mvchip); - } - - mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1); - if (mvchip->irqbase < 0) { - dev_err(&pdev->dev, "no irqs\n"); - return mvchip->irqbase; + mvchip->domain = + irq_domain_add_linear(np, ngpios, &irq_generic_chip_ops, NULL); + if (!mvchip->domain) { + dev_err(&pdev->dev, "couldn't allocate irq domain %s (DT).\n", + mvchip->chip.label); + return -ENODEV; } - gc = irq_alloc_generic_chip("mvebu_gpio_irq", 2, mvchip->irqbase, - mvchip->membase, handle_level_irq); - if (!gc) { - dev_err(&pdev->dev, "Cannot allocate generic irq_chip\n"); - return -ENOMEM; + err = irq_alloc_domain_generic_chips( + mvchip->domain, ngpios, 2, np->name, handle_level_irq, + IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_LEVEL, 0, 0); + if (err) { + dev_err(&pdev->dev, "couldn't allocate irq chips %s (DT).\n", + mvchip->chip.label); + goto err_domain; } + /* NOTE: The common accessors cannot be used because of the percpu + * access to the mask registers + */ + gc = irq_get_domain_generic_chip(mvchip->domain, 0); gc->private = mvchip; ct = &gc->chip_types[0]; ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; @@ -803,27 +801,23 @@ static int mvebu_gpio_probe(struct platform_device *pdev) ct->handler = handle_edge_irq; ct->chip.name = mvchip->chip.label; - irq_setup_generic_chip(gc, IRQ_MSK(ngpios), 0, - IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); + /* Setup the interrupt handlers. Each chip can have up to 4 + * interrupt handlers, with each handler dealing with 8 GPIO + * pins. + */ + for (i = 0; i < 4; i++) { + int irq = platform_get_irq(pdev, i); - /* Setup irq domain on top of the generic chip. */ - mvchip->domain = irq_domain_add_simple(np, mvchip->chip.ngpio, - mvchip->irqbase, - &irq_domain_simple_ops, - mvchip); - if (!mvchip->domain) { - dev_err(&pdev->dev, "couldn't allocate irq domain %s (DT).\n", - mvchip->chip.label); - err = -ENODEV; - goto err_generic_chip; + if (irq < 0) + continue; + irq_set_chained_handler_and_data(irq, mvebu_gpio_irq_handler, + mvchip); } return 0; -err_generic_chip: - irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, - IRQ_LEVEL | IRQ_NOPROBE); - kfree(gc); +err_domain: + irq_domain_remove(mvchip->domain); return err; } -- cgit From 8d42629be0cb6c58a5c77cd02e47974c0e724e63 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 28 Oct 2016 22:22:33 -0400 Subject: svcrdma: backchannel cannot share a page for send and rcv buffers The underlying transport releases the page pointed to by rq_buffer during xprt_rdma_bc_send_request. When the backchannel reply arrives, rq_rbuffer then points to freed memory. Fixes: 68778945e46f ('SUNRPC: Separate buffer pointers for RPC ...') Signed-off-by: Chuck Lever Cc: Jeff Layton Signed-off-by: J. Bruce Fields --- net/sunrpc/xprtrdma/svc_rdma_backchannel.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c index fc4535ead7c2..20027f8de129 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c +++ b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c @@ -177,19 +177,26 @@ xprt_rdma_bc_allocate(struct rpc_task *task) return -EINVAL; } + /* svc_rdma_sendto releases this page */ page = alloc_page(RPCRDMA_DEF_GFP); if (!page) return -ENOMEM; - rqst->rq_buffer = page_address(page); - rqst->rq_rbuffer = (char *)rqst->rq_buffer + rqst->rq_callsize; + + rqst->rq_rbuffer = kmalloc(rqst->rq_rcvsize, RPCRDMA_DEF_GFP); + if (!rqst->rq_rbuffer) { + put_page(page); + return -ENOMEM; + } return 0; } static void xprt_rdma_bc_free(struct rpc_task *task) { - /* No-op: ctxt and page have already been freed. */ + struct rpc_rqst *rqst = task->tk_rqstp; + + kfree(rqst->rq_rbuffer); } static int -- cgit From f46c445b79906a9da55c13e0a6f6b6a006b892fe Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Sat, 29 Oct 2016 18:19:03 -0400 Subject: nfsd: Fix general protection fault in release_lock_stateid() When I push NFSv4.1 / RDMA hard, (xfstests generic/089, for example), I get this crash on the server: Oct 28 22:04:30 klimt kernel: general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC Oct 28 22:04:30 klimt kernel: Modules linked in: cts rpcsec_gss_krb5 iTCO_wdt iTCO_vendor_support sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm btrfs irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd xor pcspkr raid6_pq i2c_i801 i2c_smbus lpc_ich mfd_core sg mei_me mei ioatdma shpchp wmi ipmi_si ipmi_msghandler rpcrdma ib_ipoib rdma_ucm acpi_power_meter acpi_pad ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c mlx4_ib mlx4_en ib_core sr_mod cdrom sd_mod ast drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel igb ahci libahci ptp mlx4_core pps_core dca libata i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod Oct 28 22:04:30 klimt kernel: CPU: 7 PID: 1558 Comm: nfsd Not tainted 4.9.0-rc2-00005-g82cd754 #8 Oct 28 22:04:30 klimt kernel: Hardware name: Supermicro Super Server/X10SRL-F, BIOS 1.0c 09/09/2015 Oct 28 22:04:30 klimt kernel: task: ffff880835c3a100 task.stack: ffff8808420d8000 Oct 28 22:04:30 klimt kernel: RIP: 0010:[] [] release_lock_stateid+0x1f/0x60 [nfsd] Oct 28 22:04:30 klimt kernel: RSP: 0018:ffff8808420dbce0 EFLAGS: 00010246 Oct 28 22:04:30 klimt kernel: RAX: ffff88084e6660f0 RBX: ffff88084e667020 RCX: 0000000000000000 Oct 28 22:04:30 klimt kernel: RDX: 0000000000000007 RSI: 0000000000000000 RDI: ffff88084e667020 Oct 28 22:04:30 klimt kernel: RBP: ffff8808420dbcf8 R08: 0000000000000001 R09: 0000000000000000 Oct 28 22:04:30 klimt kernel: R10: ffff880835c3a100 R11: ffff880835c3aca8 R12: 6b6b6b6b6b6b6b6b Oct 28 22:04:30 klimt kernel: R13: ffff88084e6670d8 R14: ffff880835f546f0 R15: ffff880835f1c548 Oct 28 22:04:30 klimt kernel: FS: 0000000000000000(0000) GS:ffff88087bdc0000(0000) knlGS:0000000000000000 Oct 28 22:04:30 klimt kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Oct 28 22:04:30 klimt kernel: CR2: 00007ff020389000 CR3: 0000000001c06000 CR4: 00000000001406e0 Oct 28 22:04:30 klimt kernel: Stack: Oct 28 22:04:30 klimt kernel: ffff88084e667020 0000000000000000 ffff88084e6670d8 ffff8808420dbd20 Oct 28 22:04:30 klimt kernel: ffffffffa05ac80d ffff880835f54548 ffff88084e640008 ffff880835f545b0 Oct 28 22:04:30 klimt kernel: ffff8808420dbd70 ffffffffa059803d ffff880835f1c768 0000000000000870 Oct 28 22:04:30 klimt kernel: Call Trace: Oct 28 22:04:30 klimt kernel: [] nfsd4_free_stateid+0xfd/0x1b0 [nfsd] Oct 28 22:04:30 klimt kernel: [] nfsd4_proc_compound+0x40d/0x690 [nfsd] Oct 28 22:04:30 klimt kernel: [] nfsd_dispatch+0xd4/0x1d0 [nfsd] Oct 28 22:04:30 klimt kernel: [] svc_process_common+0x3d9/0x700 [sunrpc] Oct 28 22:04:30 klimt kernel: [] svc_process+0xf4/0x330 [sunrpc] Oct 28 22:04:30 klimt kernel: [] nfsd+0xfa/0x160 [nfsd] Oct 28 22:04:30 klimt kernel: [] ? nfsd_destroy+0x170/0x170 [nfsd] Oct 28 22:04:30 klimt kernel: [] kthread+0x10b/0x120 Oct 28 22:04:30 klimt kernel: [] ? kthread_stop+0x280/0x280 Oct 28 22:04:30 klimt kernel: [] ret_from_fork+0x2a/0x40 Oct 28 22:04:30 klimt kernel: Code: c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 48 8b 87 b0 00 00 00 48 89 fb 4c 8b a0 98 00 00 00 <49> 8b 44 24 20 48 8d b8 80 03 00 00 e8 10 66 1a e1 48 89 df e8 Oct 28 22:04:30 klimt kernel: RIP [] release_lock_stateid+0x1f/0x60 [nfsd] Oct 28 22:04:30 klimt kernel: RSP Oct 28 22:04:30 klimt kernel: ---[ end trace cf5d0b371973e167 ]--- Jeff Layton says: > Hm...now that I look though, this is a little suspicious: > > struct nfs4_openowner *oo = openowner(stp->st_openstp->st_stateowner); > > I wonder if it's possible for the openstateid to have already been > destroyed at this point. > > We might be better off doing something like this to get the client pointer: > > stp->st_stid.sc_client; > > ...which should be more direct and less dependent on other stateids > staying valid. With the suggested change, I am no longer able to reproduce the above oops. v2: Fix unhash_lock_stateid() as well Fix-suggested-by: Jeff Layton Fixes: 42691398be08 ('nfsd: Fix race between FREE_STATEID and LOCK') Signed-off-by: Chuck Lever Reviewed-by: Jeff Layton Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4state.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 95474196a17e..4b4beaaa4eaa 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -1227,9 +1227,7 @@ static void put_ol_stateid_locked(struct nfs4_ol_stateid *stp, static bool unhash_lock_stateid(struct nfs4_ol_stateid *stp) { - struct nfs4_openowner *oo = openowner(stp->st_openstp->st_stateowner); - - lockdep_assert_held(&oo->oo_owner.so_client->cl_lock); + lockdep_assert_held(&stp->st_stid.sc_client->cl_lock); list_del_init(&stp->st_locks); nfs4_unhash_stid(&stp->st_stid); @@ -1238,12 +1236,12 @@ static bool unhash_lock_stateid(struct nfs4_ol_stateid *stp) static void release_lock_stateid(struct nfs4_ol_stateid *stp) { - struct nfs4_openowner *oo = openowner(stp->st_openstp->st_stateowner); + struct nfs4_client *clp = stp->st_stid.sc_client; bool unhashed; - spin_lock(&oo->oo_owner.so_client->cl_lock); + spin_lock(&clp->cl_lock); unhashed = unhash_lock_stateid(stp); - spin_unlock(&oo->oo_owner.so_client->cl_lock); + spin_unlock(&clp->cl_lock); if (unhashed) nfs4_put_stid(&stp->st_stid); } -- cgit From 3716a891d65cc04217da1af5f2bccb7eaf6092c2 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 1 Nov 2016 14:31:55 +0800 Subject: ASoC: sun4i-codec: Enable bus clock after getting GPIO In the current probe function the GPIO is acquired after the codec's bus clock is enabled. However if it fails to acquire the GPIO due to a deferred probe, it does not disable the bus clock before bailing out. This would result in the clock being enabled multiple times. Move the code that enables the bus clock after the part that gets the GPIO, maintaining a separation between resource acquisition and device enablement in the probe function. Signed-off-by: Chen-Yu Tsai Signed-off-by: Mark Brown --- sound/soc/sunxi/sun4i-codec.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c index a60707761abf..56ed9472e89f 100644 --- a/sound/soc/sunxi/sun4i-codec.c +++ b/sound/soc/sunxi/sun4i-codec.c @@ -829,12 +829,6 @@ static int sun4i_codec_probe(struct platform_device *pdev) return PTR_ERR(scodec->clk_module); } - /* Enable the bus clock */ - if (clk_prepare_enable(scodec->clk_apb)) { - dev_err(&pdev->dev, "Failed to enable the APB clock\n"); - return -EINVAL; - } - scodec->gpio_pa = devm_gpiod_get_optional(&pdev->dev, "allwinner,pa", GPIOD_OUT_LOW); if (IS_ERR(scodec->gpio_pa)) { @@ -844,6 +838,12 @@ static int sun4i_codec_probe(struct platform_device *pdev) return ret; } + /* Enable the bus clock */ + if (clk_prepare_enable(scodec->clk_apb)) { + dev_err(&pdev->dev, "Failed to enable the APB clock\n"); + return -EINVAL; + } + /* DMA configuration for TX FIFO */ scodec->playback_dma_data.addr = res->start + SUN4I_CODEC_DAC_TXDATA; scodec->playback_dma_data.maxburst = 4; -- cgit From a5dd506e1584e91f3e7500ab9a165aa1b49eabd4 Mon Sep 17 00:00:00 2001 From: Bill Kuzeja Date: Fri, 21 Oct 2016 16:45:27 -0400 Subject: scsi: qla2xxx: Fix scsi scan hang triggered if adapter fails during init A system can get hung task timeouts if a qlogic board fails during initialization (if the board breaks again or fails the init). The hang involves the scsi scan. In a nutshell, since commit beb9e315e6e0 ("qla2xxx: Prevent removal and board_disable race"): ...it is possible to have freed ha (base_vha->hw) early by a call to qla2x00_remove_one when pdev->enable_cnt equals zero: if (!atomic_read(&pdev->enable_cnt)) { scsi_host_put(base_vha->host); kfree(ha); pci_set_drvdata(pdev, NULL); return; Almost always, the scsi_host_put above frees the vha structure (attached to the end of the Scsi_Host we're putting) since it's the last put, and life is good. However, if we are entering this routine because the adapter has broken sometime during initialization AND a scsi scan is already in progress (and has done its own scsi_host_get), vha will not be freed. What's worse, the scsi scan will access the freed ha structure through qla2xxx_scan_finished: if (time > vha->hw->loop_reset_delay * HZ) return 1; The scsi scan keeps checking to see if a scan is complete by calling qla2xxx_scan_finished. There is a timeout value that limits the length of time a scan can take (hw->loop_reset_delay, usually set to 5 seconds), but this definition is in the data structure (hw) that can get freed early. This can yield unpredictable results, the worst of which is that the scsi scan can hang indefinitely. This happens when the freed structure gets reused and loop_reset_delay gets overwritten with garbage, which the scan obliviously uses as its timeout value. The fix for this is simple: at the top of qla2xxx_scan_finished, check for the UNLOADING bit in the vha structure (_vha is not freed at this point). If UNLOADING is set, we exit the scan for this adapter immediately. After this last reference to the ha structure, we'll exit the scan for this adapter, and continue on. This problem is hard to hit, but I have run into it doing negative testing many times now (with a test specifically designed to bring it out), so I can verify that this fix works. My testing has been against a RHEL7 driver variant, but the bug and patch are equally relevant to to the upstream driver. Fixes: beb9e315e6e0 ("qla2xxx: Prevent removal and board_disable race") Cc: # v3.18+ Signed-off-by: Bill Kuzeja Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index ace65db1d2a2..4d99c3b37687 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2341,6 +2341,8 @@ qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time) { scsi_qla_host_t *vha = shost_priv(shost); + if (test_bit(UNLOADING, &vha->dpc_flags)) + return 1; if (!vha->host) return 1; if (time > vha->hw->loop_reset_delay * HZ) -- cgit From 5c2f117a22e46a4afee6ddee29b653a7a2a6b41f Mon Sep 17 00:00:00 2001 From: Emil Lundmark Date: Wed, 12 Oct 2016 12:31:40 +0200 Subject: clk: imx: fix integer overflow in AV PLL round rate Since 'parent_rate * mfn' may overflow 32 bits, the result should be stored using 64 bits. The problem was discovered when trying to set the rate of the audio PLL (pll4_post_div) on an i.MX6Q. The desired rate was 196.608 MHz, but the actual rate returned was 192.000570 MHz. The round rate function should have been able to return 196.608 MHz, i.e., the desired rate. Fixes: ba7f4f557eb6 ("clk: imx: correct AV PLL rate formula") Cc: Anson Huang Signed-off-by: Emil Lundmark Reviewed-by: Fabio Estevam Acked-by: Shawn Guo Signed-off-by: Stephen Boyd --- drivers/clk/imx/clk-pllv3.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c index 19f9b622981a..7a6acc3e4a92 100644 --- a/drivers/clk/imx/clk-pllv3.c +++ b/drivers/clk/imx/clk-pllv3.c @@ -223,7 +223,7 @@ static unsigned long clk_pllv3_av_recalc_rate(struct clk_hw *hw, temp64 *= mfn; do_div(temp64, mfd); - return (parent_rate * div) + (u32)temp64; + return parent_rate * div + (unsigned long)temp64; } static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate, @@ -247,7 +247,11 @@ static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate, do_div(temp64, parent_rate); mfn = temp64; - return parent_rate * div + parent_rate * mfn / mfd; + temp64 = (u64)parent_rate; + temp64 *= mfn; + do_div(temp64, mfd); + + return parent_rate * div + (unsigned long)temp64; } static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate, -- cgit From 7c1c5413a7bdf1c9adc8d979521f1b8286366aef Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Mon, 17 Oct 2016 13:42:23 -0500 Subject: clk: qoriq: Don't allow CPU clocks higher than starting value The boot-time frequency of a CPU is considered its rated maximum, as we have no other source of such information. However, this was previously only used for chips with 80% restrictions on secondary PLLs. This usually wasn't a problem because most chips/configs boot with a divider of /1, with other dividers being used only for dynamic frequency reduction. However, at least one config (LS1021A at less than 1 GHz) uses a different divider for top speed. This was causing cpufreq to set a frequency beyond the chip's rated speed. This is fixed by applying a 100%-of-initial-speed limit to all CPU PLLs, similar to the existing 80% limit that only applied to some. Signed-off-by: Scott Wood Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd --- drivers/clk/clk-qoriq.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c index 20b105584f82..80ae2a51452d 100644 --- a/drivers/clk/clk-qoriq.c +++ b/drivers/clk/clk-qoriq.c @@ -700,6 +700,7 @@ static struct clk * __init create_mux_common(struct clockgen *cg, struct mux_hwclock *hwc, const struct clk_ops *ops, unsigned long min_rate, + unsigned long max_rate, unsigned long pct80_rate, const char *fmt, int idx) { @@ -728,6 +729,8 @@ static struct clk * __init create_mux_common(struct clockgen *cg, continue; if (rate < min_rate) continue; + if (rate > max_rate) + continue; parent_names[j] = div->name; hwc->parent_to_clksel[j] = i; @@ -759,7 +762,7 @@ static struct clk * __init create_one_cmux(struct clockgen *cg, int idx) struct mux_hwclock *hwc; const struct clockgen_pll_div *div; unsigned long plat_rate, min_rate; - u64 pct80_rate; + u64 max_rate, pct80_rate; u32 clksel; hwc = kzalloc(sizeof(*hwc), GFP_KERNEL); @@ -787,8 +790,8 @@ static struct clk * __init create_one_cmux(struct clockgen *cg, int idx) return NULL; } - pct80_rate = clk_get_rate(div->clk); - pct80_rate *= 8; + max_rate = clk_get_rate(div->clk); + pct80_rate = max_rate * 8; do_div(pct80_rate, 10); plat_rate = clk_get_rate(cg->pll[PLATFORM_PLL].div[PLL_DIV1].clk); @@ -798,7 +801,7 @@ static struct clk * __init create_one_cmux(struct clockgen *cg, int idx) else min_rate = plat_rate / 2; - return create_mux_common(cg, hwc, &cmux_ops, min_rate, + return create_mux_common(cg, hwc, &cmux_ops, min_rate, max_rate, pct80_rate, "cg-cmux%d", idx); } @@ -813,7 +816,7 @@ static struct clk * __init create_one_hwaccel(struct clockgen *cg, int idx) hwc->reg = cg->regs + 0x20 * idx + 0x10; hwc->info = cg->info.hwaccel[idx]; - return create_mux_common(cg, hwc, &hwaccel_ops, 0, 0, + return create_mux_common(cg, hwc, &hwaccel_ops, 0, ULONG_MAX, 0, "cg-hwaccel%d", idx); } -- cgit From a29e52a6e66f4c0c895e7083e4bad2e7957f1fb5 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 17 Sep 2016 15:54:13 +0000 Subject: clk: mmp: mmp2: fix return value check in mmp2_clk_init() Fix the retrn value check which testing the wrong variable in mmp2_clk_init(). Fixes: 1ec770d92a62 ("clk: mmp: add mmp2 DT support for clock driver") Signed-off-by: Wei Yongjun Signed-off-by: Stephen Boyd --- drivers/clk/mmp/clk-of-mmp2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c index 3a51fff1b0e7..9adaf48aea23 100644 --- a/drivers/clk/mmp/clk-of-mmp2.c +++ b/drivers/clk/mmp/clk-of-mmp2.c @@ -313,7 +313,7 @@ static void __init mmp2_clk_init(struct device_node *np) } pxa_unit->apmu_base = of_iomap(np, 1); - if (!pxa_unit->mpmu_base) { + if (!pxa_unit->apmu_base) { pr_err("failed to map apmu registers\n"); return; } -- cgit From deab07261d54b4db7b627d38e0efac97f176c6d6 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 17 Sep 2016 15:54:28 +0000 Subject: clk: mmp: pxa168: fix return value check in pxa168_clk_init() Fix the retrn value check which testing the wrong variable in pxa168_clk_init(). Fixes: ab08aefcd12d ("clk: mmp: add pxa168 DT support for clock driver") Signed-off-by: Wei Yongjun Signed-off-by: Stephen Boyd --- drivers/clk/mmp/clk-of-pxa168.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/mmp/clk-of-pxa168.c b/drivers/clk/mmp/clk-of-pxa168.c index 87f2317b2a00..f110c02e83cb 100644 --- a/drivers/clk/mmp/clk-of-pxa168.c +++ b/drivers/clk/mmp/clk-of-pxa168.c @@ -262,7 +262,7 @@ static void __init pxa168_clk_init(struct device_node *np) } pxa_unit->apmu_base = of_iomap(np, 1); - if (!pxa_unit->mpmu_base) { + if (!pxa_unit->apmu_base) { pr_err("failed to map apmu registers\n"); return; } -- cgit From 10f2bfb092e3b49000526c02cfe8b2abbbdbb752 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 17 Sep 2016 15:55:56 +0000 Subject: clk: mmp: pxa910: fix return value check in pxa910_clk_init() Fix the retrn value check which testing the wrong variable in pxa910_clk_init(). Fixes: 2bc61da9f7ff ("clk: mmp: add pxa910 DT support for clock driver") Signed-off-by: Wei Yongjun Signed-off-by: Stephen Boyd --- drivers/clk/mmp/clk-of-pxa910.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/mmp/clk-of-pxa910.c b/drivers/clk/mmp/clk-of-pxa910.c index e22a67f76d93..64d1ef49caeb 100644 --- a/drivers/clk/mmp/clk-of-pxa910.c +++ b/drivers/clk/mmp/clk-of-pxa910.c @@ -282,7 +282,7 @@ static void __init pxa910_clk_init(struct device_node *np) } pxa_unit->apmu_base = of_iomap(np, 1); - if (!pxa_unit->mpmu_base) { + if (!pxa_unit->apmu_base) { pr_err("failed to map apmu registers\n"); return; } @@ -294,7 +294,7 @@ static void __init pxa910_clk_init(struct device_node *np) } pxa_unit->apbcp_base = of_iomap(np, 3); - if (!pxa_unit->mpmu_base) { + if (!pxa_unit->apbcp_base) { pr_err("failed to map apbcp registers\n"); return; } -- cgit From ceb75787bc75d0a7b88519ab8a68067ac690f55a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 1 Nov 2016 11:49:56 +0100 Subject: PM / sleep: fix device reference leak in test_suspend Make sure to drop the reference taken by class_find_device() after opening the RTC device. Fixes: 77437fd4e61f (pm: boot time suspend selftest) Signed-off-by: Johan Hovold Signed-off-by: Rafael J. Wysocki --- kernel/power/suspend_test.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/power/suspend_test.c b/kernel/power/suspend_test.c index 084452e34a12..bdff5ed57f10 100644 --- a/kernel/power/suspend_test.c +++ b/kernel/power/suspend_test.c @@ -203,8 +203,10 @@ static int __init test_suspend(void) /* RTCs have initialized by now too ... can we use one? */ dev = class_find_device(rtc_class, NULL, NULL, has_wakealarm); - if (dev) + if (dev) { rtc = rtc_class_open(dev_name(dev)); + put_device(dev); + } if (!rtc) { printk(warn_no_rtc); return 0; -- cgit From 8d23ea403044efe97553dd64228b172c8ffca047 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Tue, 25 Oct 2016 12:17:59 +0530 Subject: drm/msm/dsi: Queue HPD helper work in attach/detach callbacks The msm/dsi host drivers calls drm_helper_hpd_irq_event in the mipi_dsi_host attach/detatch callbacks. mipi_dsi_attach()/mipi_dsi_detach() from a panel/bridge driver could be called from a context where the drm_device's mode_config.mutex is already held, resulting in a deadlock. Queue it as work instead. Signed-off-by: Archit Taneja Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/dsi_host.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index f05ed0e1f3d6..6f240021705b 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -139,6 +139,7 @@ struct msm_dsi_host { u32 err_work_state; struct work_struct err_work; + struct work_struct hpd_work; struct workqueue_struct *workqueue; /* DSI 6G TX buffer*/ @@ -1294,6 +1295,14 @@ static void dsi_sw_reset_restore(struct msm_dsi_host *msm_host) wmb(); /* make sure dsi controller enabled again */ } +static void dsi_hpd_worker(struct work_struct *work) +{ + struct msm_dsi_host *msm_host = + container_of(work, struct msm_dsi_host, hpd_work); + + drm_helper_hpd_irq_event(msm_host->dev); +} + static void dsi_err_worker(struct work_struct *work) { struct msm_dsi_host *msm_host = @@ -1480,7 +1489,7 @@ static int dsi_host_attach(struct mipi_dsi_host *host, DBG("id=%d", msm_host->id); if (msm_host->dev) - drm_helper_hpd_irq_event(msm_host->dev); + queue_work(msm_host->workqueue, &msm_host->hpd_work); return 0; } @@ -1494,7 +1503,7 @@ static int dsi_host_detach(struct mipi_dsi_host *host, DBG("id=%d", msm_host->id); if (msm_host->dev) - drm_helper_hpd_irq_event(msm_host->dev); + queue_work(msm_host->workqueue, &msm_host->hpd_work); return 0; } @@ -1748,6 +1757,7 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi) /* setup workqueue */ msm_host->workqueue = alloc_ordered_workqueue("dsi_drm_work", 0); INIT_WORK(&msm_host->err_work, dsi_err_worker); + INIT_WORK(&msm_host->hpd_work, dsi_hpd_worker); msm_dsi->host = &msm_host->base; msm_dsi->id = msm_host->id; -- cgit From 73b65b197024f3f9ef16a28cc9533c011e0a3f6d Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Thu, 27 Oct 2016 11:57:15 +0530 Subject: drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks The DSI/HDMI PLLs in MSM require resources like interface clocks, power domains to be enabled before we can access their registers. The clock framework doesn't have a mechanism at the moment where we can tie such resources to a clock, so we make sure that the KMS driver enables these resources whenever a PLL is expected to be in use. One place where we can't ensure the resource dependencies are met is when the clock framework tries to disable unused clocks. The KMS driver doesn't know when the clock framework calls the is_enabled clk_op, and hence can't enable interface clocks/power domains beforehand. We set the CLK_IGNORE_UNUSED flag for PLL clocks for now. This needs to be revisited, since bootloaders can enable display, and we would want to disable the PLL clocks if there isn't a display driver using them. Cc: Stephen Boyd Signed-off-by: Archit Taneja Acked-by: Stephen Boyd Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c | 1 + drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 1 + drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c | 1 + drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c | 1 + 4 files changed, 4 insertions(+) diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c index 598fdaff0a41..26e3a01a99c2 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c @@ -521,6 +521,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) .parent_names = (const char *[]){ "xo" }, .num_parents = 1, .name = vco_name, + .flags = CLK_IGNORE_UNUSED, .ops = &clk_ops_dsi_pll_28nm_vco, }; struct device *dev = &pll_28nm->pdev->dev; diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c index 38c90e1eb002..49008451085b 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c @@ -412,6 +412,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) struct clk_init_data vco_init = { .parent_names = (const char *[]){ "pxo" }, .num_parents = 1, + .flags = CLK_IGNORE_UNUSED, .ops = &clk_ops_dsi_pll_28nm_vco, }; struct device *dev = &pll_28nm->pdev->dev; diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c index aa94a553794f..143eab46ba68 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c @@ -702,6 +702,7 @@ static struct clk_init_data pll_init = { .ops = &hdmi_8996_pll_ops, .parent_names = hdmi_pll_parents, .num_parents = ARRAY_SIZE(hdmi_pll_parents), + .flags = CLK_IGNORE_UNUSED, }; int msm_hdmi_pll_8996_init(struct platform_device *pdev) diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c index 92da69aa6187..99590758c68b 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c @@ -424,6 +424,7 @@ static struct clk_init_data pll_init = { .ops = &hdmi_pll_ops, .parent_names = hdmi_pll_parents, .num_parents = ARRAY_SIZE(hdmi_pll_parents), + .flags = CLK_IGNORE_UNUSED, }; int msm_hdmi_pll_8960_init(struct platform_device *pdev) -- cgit From 31e4801aa2e59d4b42dc0fd42846a3aa7a6361af Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 13 Oct 2016 12:43:17 -0400 Subject: drm/msm/mdp5: handle non-fullscreen base plane case If the bottom-most layer is not fullscreen, we need to use the BASE mixer stage for solid fill (ie. MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT). The blend_setup() code pretty much handled this already, we just had to figure this out in _atomic_check() and assign the stages appropriately. Also fix the case where there are zero enabled planes, where we also need to enable BORDER_OUT. Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 46 +++++++++++++++++++------------- 1 file changed, 28 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c index fa2be7ce9468..c205c360e16d 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c @@ -223,12 +223,7 @@ static void blend_setup(struct drm_crtc *crtc) plane_cnt++; } - /* - * If there is no base layer, enable border color. - * Although it's not possbile in current blend logic, - * put it here as a reminder. - */ - if (!pstates[STAGE_BASE] && plane_cnt) { + if (!pstates[STAGE_BASE]) { ctl_blend_flags |= MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT; DBG("Border Color is enabled"); } @@ -365,6 +360,15 @@ static int pstate_cmp(const void *a, const void *b) return pa->state->zpos - pb->state->zpos; } +/* is there a helper for this? */ +static bool is_fullscreen(struct drm_crtc_state *cstate, + struct drm_plane_state *pstate) +{ + return (pstate->crtc_x <= 0) && (pstate->crtc_y <= 0) && + ((pstate->crtc_x + pstate->crtc_w) >= cstate->mode.hdisplay) && + ((pstate->crtc_y + pstate->crtc_h) >= cstate->mode.vdisplay); +} + static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, struct drm_crtc_state *state) { @@ -375,21 +379,11 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, struct plane_state pstates[STAGE_MAX + 1]; const struct mdp5_cfg_hw *hw_cfg; const struct drm_plane_state *pstate; - int cnt = 0, i; + int cnt = 0, base = 0, i; DBG("%s: check", mdp5_crtc->name); - /* verify that there are not too many planes attached to crtc - * and that we don't have conflicting mixer stages: - */ - hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg); drm_atomic_crtc_state_for_each_plane_state(plane, pstate, state) { - if (cnt >= (hw_cfg->lm.nb_stages)) { - dev_err(dev->dev, "too many planes!\n"); - return -EINVAL; - } - - pstates[cnt].plane = plane; pstates[cnt].state = to_mdp5_plane_state(pstate); @@ -399,8 +393,24 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, /* assign a stage based on sorted zpos property */ sort(pstates, cnt, sizeof(pstates[0]), pstate_cmp, NULL); + /* if the bottom-most layer is not fullscreen, we need to use + * it for solid-color: + */ + if ((cnt > 0) && !is_fullscreen(state, &pstates[0].state->base)) + base++; + + /* verify that there are not too many planes attached to crtc + * and that we don't have conflicting mixer stages: + */ + hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg); + + if ((cnt + base) >= hw_cfg->lm.nb_stages) { + dev_err(dev->dev, "too many planes!\n"); + return -EINVAL; + } + for (i = 0; i < cnt; i++) { - pstates[i].state->stage = STAGE_BASE + i; + pstates[i].state->stage = STAGE_BASE + i + base; DBG("%s: assign pipe %s on stage=%d", mdp5_crtc->name, pipe2name(mdp5_plane_pipe(pstates[i].plane)), pstates[i].state->stage); -- cgit From 07cd2e36263af34f7f0b48e36eff5d4b77d5756a Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 17 Oct 2016 12:00:21 -0400 Subject: drm/msm/mdp5: no scaling support on RGBn pipes for 8x16 Looks like cut/paste error from the other device cfgs (which do support scaling on RGBn pipes). Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 2 +- drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 9 +++------ 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c index ac9e4cde1380..0e2bc5636c81 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c @@ -272,7 +272,7 @@ const struct mdp5_cfg_hw msm8x16_config = { .count = 2, .base = { 0x14000, 0x16000 }, .caps = MDP_PIPE_CAP_HFLIP | MDP_PIPE_CAP_VFLIP | - MDP_PIPE_CAP_SCALE | MDP_PIPE_CAP_DECIMATION, + MDP_PIPE_CAP_DECIMATION, }, .pipe_dma = { .count = 1, diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c index 951c002b05df..83bf997dda03 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c @@ -292,8 +292,7 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, format = to_mdp_format(msm_framebuffer_format(state->fb)); if (MDP_FORMAT_IS_YUV(format) && !pipe_supports_yuv(mdp5_plane->caps)) { - dev_err(plane->dev->dev, - "Pipe doesn't support YUV\n"); + DBG("Pipe doesn't support YUV\n"); return -EINVAL; } @@ -301,8 +300,7 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, if (!(mdp5_plane->caps & MDP_PIPE_CAP_SCALE) && (((state->src_w >> 16) != state->crtc_w) || ((state->src_h >> 16) != state->crtc_h))) { - dev_err(plane->dev->dev, - "Pipe doesn't support scaling (%dx%d -> %dx%d)\n", + DBG("Pipe doesn't support scaling (%dx%d -> %dx%d)\n", state->src_w >> 16, state->src_h >> 16, state->crtc_w, state->crtc_h); @@ -313,8 +311,7 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, vflip = !!(state->rotation & DRM_REFLECT_Y); if ((vflip && !(mdp5_plane->caps & MDP_PIPE_CAP_VFLIP)) || (hflip && !(mdp5_plane->caps & MDP_PIPE_CAP_HFLIP))) { - dev_err(plane->dev->dev, - "Pipe doesn't support flip\n"); + DBG("Pipe doesn't support flip\n"); return -EINVAL; } -- cgit From 67cba0fbb484bbc1af42f2804662a80008ba61e9 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 24 Oct 2016 11:46:44 -0400 Subject: drm/msm/mdp5: 8x16 actually has 8 mixer stages Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c index 0e2bc5636c81..8b4e3004f451 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c @@ -282,7 +282,7 @@ const struct mdp5_cfg_hw msm8x16_config = { .lm = { .count = 2, /* LM0 and LM3 */ .base = { 0x44000, 0x47000 }, - .nb_stages = 5, + .nb_stages = 8, .max_width = 2048, .max_height = 0xFFFF, }, -- cgit From a4513320423a388ed55eb0754353f46b10d05a99 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 2 Nov 2016 12:03:03 +0100 Subject: ASoC: samsung: spdif: Fix DMA filter initialization MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes issues introduced in commit 73f5dfc68316bef2ab7062ec "ASoC: samsung: get access to DMA engine early to defer probe properly" and indicated by a following compilation warning: CC [M] sound/soc/samsung/spdif.o sound/soc/samsung/spdif.c: In function ‘spdif_probe’: sound/soc/samsung/spdif.c:419:6: warning: ‘filter’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Sylwester Nawrocki Signed-off-by: Mark Brown --- sound/soc/samsung/spdif.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/sound/soc/samsung/spdif.c b/sound/soc/samsung/spdif.c index 704b7b12bf8b..779504f54bc0 100644 --- a/sound/soc/samsung/spdif.c +++ b/sound/soc/samsung/spdif.c @@ -416,6 +416,15 @@ static int spdif_probe(struct platform_device *pdev) goto err3; } + spdif_stereo_out.addr_width = 2; + spdif_stereo_out.addr = mem_res->start + DATA_OUTBUF; + filter = NULL; + if (spdif_pdata) { + spdif_stereo_out.filter_data = spdif_pdata->dma_playback; + filter = spdif_pdata->dma_filter; + } + spdif->dma_playback = &spdif_stereo_out; + ret = samsung_asoc_dma_platform_register(&pdev->dev, filter, NULL, NULL); if (ret) { @@ -432,16 +441,6 @@ static int spdif_probe(struct platform_device *pdev) goto err4; } - spdif_stereo_out.addr_width = 2; - spdif_stereo_out.addr = mem_res->start + DATA_OUTBUF; - filter = NULL; - if (spdif_pdata) { - spdif_stereo_out.filter_data = spdif_pdata->dma_playback; - filter = spdif_pdata->dma_filter; - } - - spdif->dma_playback = &spdif_stereo_out; - return 0; err4: iounmap(spdif->regs); -- cgit From ea26e4ec08d4727e3a9e48a6b74695861effcbd9 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 1 Nov 2016 00:39:48 +0100 Subject: KVM: x86: drop TSC offsetting kvm_x86_ops to fix KVM_GET/SET_CLOCK MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit a545ab6a0085 ("kvm: x86: add tsc_offset field to struct kvm_vcpu_arch", 2016-09-07) the offset between host and L1 TSC is cached and need not be fished out of the VMCS or VMCB. This means that we can implement adjust_tsc_offset_guest and read_l1_tsc entirely in generic code. The simplification is particularly significant for VMX code, where vmx->nested.vmcs01_tsc_offset was duplicating what is now in vcpu->arch.tsc_offset. Therefore the vmcs01_tsc_offset can be dropped completely. More importantly, this fixes KVM_GET_CLOCK/KVM_SET_CLOCK which, after commit 108b249c453d ("KVM: x86: introduce get_kvmclock_ns", 2016-09-01) called read_l1_tsc while the VMCS was not loaded. It thus returned bogus values on Intel CPUs. Fixes: 108b249c453dd7132599ab6dc7e435a7036c193f Reported-by: Roman Kagan Reviewed-by: Radim Krčmář Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvm_host.h | 3 --- arch/x86/kvm/svm.c | 23 ----------------------- arch/x86/kvm/vmx.c | 39 +++------------------------------------ arch/x86/kvm/x86.c | 6 +++--- 4 files changed, 6 insertions(+), 65 deletions(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 4b20f7304b9c..bdde80731f49 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -948,7 +948,6 @@ struct kvm_x86_ops { int (*get_lpage_level)(void); bool (*rdtscp_supported)(void); bool (*invpcid_supported)(void); - void (*adjust_tsc_offset_guest)(struct kvm_vcpu *vcpu, s64 adjustment); void (*set_tdp_cr3)(struct kvm_vcpu *vcpu, unsigned long cr3); @@ -958,8 +957,6 @@ struct kvm_x86_ops { void (*write_tsc_offset)(struct kvm_vcpu *vcpu, u64 offset); - u64 (*read_l1_tsc)(struct kvm_vcpu *vcpu, u64 host_tsc); - void (*get_exit_info)(struct kvm_vcpu *vcpu, u64 *info1, u64 *info2); int (*check_intercept)(struct kvm_vcpu *vcpu, diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index f8157a36ab09..8ca1eca5038d 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -1138,21 +1138,6 @@ static void svm_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset) mark_dirty(svm->vmcb, VMCB_INTERCEPTS); } -static void svm_adjust_tsc_offset_guest(struct kvm_vcpu *vcpu, s64 adjustment) -{ - struct vcpu_svm *svm = to_svm(vcpu); - - svm->vmcb->control.tsc_offset += adjustment; - if (is_guest_mode(vcpu)) - svm->nested.hsave->control.tsc_offset += adjustment; - else - trace_kvm_write_tsc_offset(vcpu->vcpu_id, - svm->vmcb->control.tsc_offset - adjustment, - svm->vmcb->control.tsc_offset); - - mark_dirty(svm->vmcb, VMCB_INTERCEPTS); -} - static void avic_init_vmcb(struct vcpu_svm *svm) { struct vmcb *vmcb = svm->vmcb; @@ -3449,12 +3434,6 @@ static int cr8_write_interception(struct vcpu_svm *svm) return 0; } -static u64 svm_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc) -{ - struct vmcb *vmcb = get_host_vmcb(to_svm(vcpu)); - return vmcb->control.tsc_offset + host_tsc; -} - static int svm_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) { struct vcpu_svm *svm = to_svm(vcpu); @@ -5422,8 +5401,6 @@ static struct kvm_x86_ops svm_x86_ops __ro_after_init = { .has_wbinvd_exit = svm_has_wbinvd_exit, .write_tsc_offset = svm_write_tsc_offset, - .adjust_tsc_offset_guest = svm_adjust_tsc_offset_guest, - .read_l1_tsc = svm_read_l1_tsc, .set_tdp_cr3 = set_tdp_cr3, diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 74a4df993a51..754c3a7f444a 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -421,7 +421,6 @@ struct nested_vmx { /* vmcs02_list cache of VMCSs recently used to run L2 guests */ struct list_head vmcs02_pool; int vmcs02_num; - u64 vmcs01_tsc_offset; bool change_vmcs01_virtual_x2apic_mode; /* L2 must run next, and mustn't decide to exit to L1. */ bool nested_run_pending; @@ -2604,20 +2603,6 @@ static u64 guest_read_tsc(struct kvm_vcpu *vcpu) return kvm_scale_tsc(vcpu, host_tsc) + tsc_offset; } -/* - * Like guest_read_tsc, but always returns L1's notion of the timestamp - * counter, even if a nested guest (L2) is currently running. - */ -static u64 vmx_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc) -{ - u64 tsc_offset; - - tsc_offset = is_guest_mode(vcpu) ? - to_vmx(vcpu)->nested.vmcs01_tsc_offset : - vmcs_read64(TSC_OFFSET); - return host_tsc + tsc_offset; -} - /* * writes 'offset' into guest's timestamp counter offset register */ @@ -2631,7 +2616,6 @@ static void vmx_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset) * to the newly set TSC to get L2's TSC. */ struct vmcs12 *vmcs12; - to_vmx(vcpu)->nested.vmcs01_tsc_offset = offset; /* recalculate vmcs02.TSC_OFFSET: */ vmcs12 = get_vmcs12(vcpu); vmcs_write64(TSC_OFFSET, offset + @@ -2644,19 +2628,6 @@ static void vmx_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset) } } -static void vmx_adjust_tsc_offset_guest(struct kvm_vcpu *vcpu, s64 adjustment) -{ - u64 offset = vmcs_read64(TSC_OFFSET); - - vmcs_write64(TSC_OFFSET, offset + adjustment); - if (is_guest_mode(vcpu)) { - /* Even when running L2, the adjustment needs to apply to L1 */ - to_vmx(vcpu)->nested.vmcs01_tsc_offset += adjustment; - } else - trace_kvm_write_tsc_offset(vcpu->vcpu_id, offset, - offset + adjustment); -} - static bool guest_cpuid_has_vmx(struct kvm_vcpu *vcpu) { struct kvm_cpuid_entry2 *best = kvm_find_cpuid_entry(vcpu, 1, 0); @@ -10061,9 +10032,9 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12) if (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETING) vmcs_write64(TSC_OFFSET, - vmx->nested.vmcs01_tsc_offset + vmcs12->tsc_offset); + vcpu->arch.tsc_offset + vmcs12->tsc_offset); else - vmcs_write64(TSC_OFFSET, vmx->nested.vmcs01_tsc_offset); + vmcs_write64(TSC_OFFSET, vcpu->arch.tsc_offset); if (kvm_has_tsc_control) decache_tsc_multiplier(vmx); @@ -10293,8 +10264,6 @@ static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch) enter_guest_mode(vcpu); - vmx->nested.vmcs01_tsc_offset = vmcs_read64(TSC_OFFSET); - if (!(vmcs12->vm_entry_controls & VM_ENTRY_LOAD_DEBUG_CONTROLS)) vmx->nested.vmcs01_debugctl = vmcs_read64(GUEST_IA32_DEBUGCTL); @@ -10818,7 +10787,7 @@ static void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason, load_vmcs12_host_state(vcpu, vmcs12); /* Update any VMCS fields that might have changed while L2 ran */ - vmcs_write64(TSC_OFFSET, vmx->nested.vmcs01_tsc_offset); + vmcs_write64(TSC_OFFSET, vcpu->arch.tsc_offset); if (vmx->hv_deadline_tsc == -1) vmcs_clear_bits(PIN_BASED_VM_EXEC_CONTROL, PIN_BASED_VMX_PREEMPTION_TIMER); @@ -11339,8 +11308,6 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = { .has_wbinvd_exit = cpu_has_vmx_wbinvd_exit, .write_tsc_offset = vmx_write_tsc_offset, - .adjust_tsc_offset_guest = vmx_adjust_tsc_offset_guest, - .read_l1_tsc = vmx_read_l1_tsc, .set_tdp_cr3 = vmx_set_cr3, diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index e954be8a3185..3017de0431bd 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1409,7 +1409,7 @@ static u64 kvm_compute_tsc_offset(struct kvm_vcpu *vcpu, u64 target_tsc) u64 kvm_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc) { - return kvm_x86_ops->read_l1_tsc(vcpu, kvm_scale_tsc(vcpu, host_tsc)); + return vcpu->arch.tsc_offset + kvm_scale_tsc(vcpu, host_tsc); } EXPORT_SYMBOL_GPL(kvm_read_l1_tsc); @@ -1547,7 +1547,7 @@ EXPORT_SYMBOL_GPL(kvm_write_tsc); static inline void adjust_tsc_offset_guest(struct kvm_vcpu *vcpu, s64 adjustment) { - kvm_x86_ops->adjust_tsc_offset_guest(vcpu, adjustment); + kvm_vcpu_write_tsc_offset(vcpu, vcpu->arch.tsc_offset + adjustment); } static inline void adjust_tsc_offset_host(struct kvm_vcpu *vcpu, s64 adjustment) @@ -1555,7 +1555,7 @@ static inline void adjust_tsc_offset_host(struct kvm_vcpu *vcpu, s64 adjustment) if (vcpu->arch.tsc_scaling_ratio != kvm_default_tsc_scaling_ratio) WARN_ON(adjustment < 0); adjustment = kvm_scale_tsc(vcpu, (u64) adjustment); - kvm_x86_ops->adjust_tsc_offset_guest(vcpu, adjustment); + adjust_tsc_offset_guest(vcpu, adjustment); } #ifdef CONFIG_X86_64 -- cgit From 355f4fb1405ec29d0fac49b4d41fcd78cbd455d5 Mon Sep 17 00:00:00 2001 From: Jim Mattson Date: Fri, 28 Oct 2016 08:29:39 -0700 Subject: kvm: nVMX: VMCLEAR an active shadow VMCS after last use After a successful VM-entry with the "VMCS shadowing" VM-execution control set, the shadow VMCS referenced by the VMCS link pointer field in the current VMCS becomes active on the logical processor. A VMCS that is made active on more than one logical processor may become corrupted. Therefore, before an active VMCS can be migrated to another logical processor, the first logical processor must execute a VMCLEAR for the active VMCS. VMCLEAR both ensures that all VMCS data are written to memory and makes the VMCS inactive. Signed-off-by: Jim Mattson Reviewed-By: David Matlack Message-Id: <1477668579-22555-1-git-send-email-jmattson@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 754c3a7f444a..5382b82462fc 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -187,6 +187,7 @@ struct vmcs { */ struct loaded_vmcs { struct vmcs *vmcs; + struct vmcs *shadow_vmcs; int cpu; int launched; struct list_head loaded_vmcss_on_cpu_link; @@ -411,7 +412,6 @@ struct nested_vmx { * memory during VMXOFF, VMCLEAR, VMPTRLD. */ struct vmcs12 *cached_vmcs12; - struct vmcs *current_shadow_vmcs; /* * Indicates if the shadow vmcs must be updated with the * data hold by vmcs12 @@ -1418,6 +1418,8 @@ static void vmcs_clear(struct vmcs *vmcs) static inline void loaded_vmcs_init(struct loaded_vmcs *loaded_vmcs) { vmcs_clear(loaded_vmcs->vmcs); + if (loaded_vmcs->shadow_vmcs && loaded_vmcs->launched) + vmcs_clear(loaded_vmcs->shadow_vmcs); loaded_vmcs->cpu = -1; loaded_vmcs->launched = 0; } @@ -3533,6 +3535,7 @@ static void free_loaded_vmcs(struct loaded_vmcs *loaded_vmcs) loaded_vmcs_clear(loaded_vmcs); free_vmcs(loaded_vmcs->vmcs); loaded_vmcs->vmcs = NULL; + WARN_ON(loaded_vmcs->shadow_vmcs != NULL); } static void free_kvm_area(void) @@ -6667,6 +6670,7 @@ static struct loaded_vmcs *nested_get_current_vmcs02(struct vcpu_vmx *vmx) if (!item) return NULL; item->vmcs02.vmcs = alloc_vmcs(); + item->vmcs02.shadow_vmcs = NULL; if (!item->vmcs02.vmcs) { kfree(item); return NULL; @@ -7043,7 +7047,7 @@ static int handle_vmon(struct kvm_vcpu *vcpu) shadow_vmcs->revision_id |= (1u << 31); /* init shadow vmcs */ vmcs_clear(shadow_vmcs); - vmx->nested.current_shadow_vmcs = shadow_vmcs; + vmx->vmcs01.shadow_vmcs = shadow_vmcs; } INIT_LIST_HEAD(&(vmx->nested.vmcs02_pool)); @@ -7145,8 +7149,11 @@ static void free_nested(struct vcpu_vmx *vmx) free_page((unsigned long)vmx->nested.msr_bitmap); vmx->nested.msr_bitmap = NULL; } - if (enable_shadow_vmcs) - free_vmcs(vmx->nested.current_shadow_vmcs); + if (enable_shadow_vmcs) { + vmcs_clear(vmx->vmcs01.shadow_vmcs); + free_vmcs(vmx->vmcs01.shadow_vmcs); + vmx->vmcs01.shadow_vmcs = NULL; + } kfree(vmx->nested.cached_vmcs12); /* Unpin physical memory we referred to in current vmcs02 */ if (vmx->nested.apic_access_page) { @@ -7323,7 +7330,7 @@ static void copy_shadow_to_vmcs12(struct vcpu_vmx *vmx) int i; unsigned long field; u64 field_value; - struct vmcs *shadow_vmcs = vmx->nested.current_shadow_vmcs; + struct vmcs *shadow_vmcs = vmx->vmcs01.shadow_vmcs; const unsigned long *fields = shadow_read_write_fields; const int num_fields = max_shadow_read_write_fields; @@ -7372,7 +7379,7 @@ static void copy_vmcs12_to_shadow(struct vcpu_vmx *vmx) int i, q; unsigned long field; u64 field_value = 0; - struct vmcs *shadow_vmcs = vmx->nested.current_shadow_vmcs; + struct vmcs *shadow_vmcs = vmx->vmcs01.shadow_vmcs; vmcs_load(shadow_vmcs); @@ -7562,7 +7569,7 @@ static int handle_vmptrld(struct kvm_vcpu *vcpu) vmcs_set_bits(SECONDARY_VM_EXEC_CONTROL, SECONDARY_EXEC_SHADOW_VMCS); vmcs_write64(VMCS_LINK_POINTER, - __pa(vmx->nested.current_shadow_vmcs)); + __pa(vmx->vmcs01.shadow_vmcs)); vmx->nested.sync_shadow_vmcs = true; } } @@ -9127,6 +9134,7 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id) vmx->loaded_vmcs = &vmx->vmcs01; vmx->loaded_vmcs->vmcs = alloc_vmcs(); + vmx->loaded_vmcs->shadow_vmcs = NULL; if (!vmx->loaded_vmcs->vmcs) goto free_msrs; if (!vmm_exclusive) -- cgit From 45788f1f5534fb02063ca077719592c2c3ba621e Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Tue, 1 Nov 2016 15:09:58 +0200 Subject: MAINTAINERS: Update MELLANOX MLX5 core VPI driver maintainers Add myself as a maintainer for mlx5 core driver as well. Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 4012c2f98617..53964ad4f2de 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8053,6 +8053,7 @@ F: drivers/infiniband/hw/mlx4/ F: include/linux/mlx4/ MELLANOX MLX5 core VPI driver +M: Saeed Mahameed M: Matan Barak M: Leon Romanovsky L: netdev@vger.kernel.org -- cgit From 23f4ffedb7d751c7e298732ba91ca75d224bc1a6 Mon Sep 17 00:00:00 2001 From: Eli Cooper Date: Tue, 1 Nov 2016 23:45:12 +0800 Subject: ip6_tunnel: Clear IP6CB in ip6tunnel_xmit() skb->cb may contain data from previous layers. In the observed scenario, the garbage data were misinterpreted as IP6CB(skb)->frag_max_size, so that small packets sent through the tunnel are mistakenly fragmented. This patch unconditionally clears the control buffer in ip6tunnel_xmit(), which affects ip6_tunnel, ip6_udp_tunnel and ip6_gre. Currently none of these tunnels set IP6CB(skb)->flags, otherwise it needs to be done earlier. Cc: stable@vger.kernel.org Signed-off-by: Eli Cooper Signed-off-by: David S. Miller --- include/net/ip6_tunnel.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h index 20ed9699fcd4..1b1cf33cbfb0 100644 --- a/include/net/ip6_tunnel.h +++ b/include/net/ip6_tunnel.h @@ -146,6 +146,7 @@ static inline void ip6tunnel_xmit(struct sock *sk, struct sk_buff *skb, { int pkt_len, err; + memset(skb->cb, 0, sizeof(struct inet6_skb_parm)); pkt_len = skb->len - skb_inner_network_offset(skb); err = ip6_local_out(dev_net(skb_dst(skb)->dev), sk, skb); if (unlikely(net_xmit_eval(err))) -- cgit From 4fd19c15decedd06d707e2691c24fce08700e2b1 Mon Sep 17 00:00:00 2001 From: Eli Cooper Date: Tue, 1 Nov 2016 23:45:13 +0800 Subject: ip6_udp_tunnel: remove unused IPCB related codes Some IPCB fields are currently set in udp_tunnel6_xmit_skb(), which are never used before it reaches ip6tunnel_xmit(), and past that point the control buffer is no longer interpreted as IPCB. This clears these unused IPCB related codes. Currently there is no skb scrubbing in ip6_udp_tunnel, otherwise IPCB(skb)->opt might need to be cleared for IPv4 packets, as shown in 5146d1f1511 ("tunnel: Clear IPCB(skb)->opt before dst_link_failure called"). Signed-off-by: Eli Cooper Signed-off-by: David S. Miller --- net/ipv6/ip6_udp_tunnel.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/net/ipv6/ip6_udp_tunnel.c b/net/ipv6/ip6_udp_tunnel.c index a7520528ecd2..b283f293ee4a 100644 --- a/net/ipv6/ip6_udp_tunnel.c +++ b/net/ipv6/ip6_udp_tunnel.c @@ -88,9 +88,6 @@ int udp_tunnel6_xmit_skb(struct dst_entry *dst, struct sock *sk, uh->len = htons(skb->len); - memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt)); - IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED - | IPSKB_REROUTED); skb_dst_set(skb, dst); udp6_set_csum(nocheck, skb, saddr, daddr, skb->len); -- cgit From 269ebce4531b8edc4224259a02143181a1c1d77c Mon Sep 17 00:00:00 2001 From: Dongli Zhang Date: Wed, 2 Nov 2016 09:04:33 +0800 Subject: xen-netfront: cast grant table reference first to type int IS_ERR_VALUE() in commit 87557efc27f6a50140fb20df06a917f368ce3c66 ("xen-netfront: do not cast grant table reference to signed short") would not return true for error code unless we cast ref first to type int. Signed-off-by: Dongli Zhang Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 189a28dcd80d..bf2744e1e3db 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -304,7 +304,7 @@ static void xennet_alloc_rx_buffers(struct netfront_queue *queue) queue->rx_skbs[id] = skb; ref = gnttab_claim_grant_reference(&queue->gref_rx_head); - WARN_ON_ONCE(IS_ERR_VALUE((unsigned long)ref)); + WARN_ON_ONCE(IS_ERR_VALUE((unsigned long)(int)ref)); queue->grant_rx_ref[id] = ref; page = skb_frag_page(&skb_shinfo(skb)->frags[0]); @@ -428,7 +428,7 @@ static void xennet_tx_setup_grant(unsigned long gfn, unsigned int offset, id = get_id_from_freelist(&queue->tx_skb_freelist, queue->tx_skbs); tx = RING_GET_REQUEST(&queue->tx, queue->tx.req_prod_pvt++); ref = gnttab_claim_grant_reference(&queue->gref_tx_head); - WARN_ON_ONCE(IS_ERR_VALUE((unsigned long)ref)); + WARN_ON_ONCE(IS_ERR_VALUE((unsigned long)(int)ref)); gnttab_grant_foreign_access_ref(ref, queue->info->xbdev->otherend_id, gfn, GNTMAP_readonly); -- cgit From d9092f52d7e61dd1557f2db2400ddb430e85937e Mon Sep 17 00:00:00 2001 From: Owen Hofmann Date: Thu, 27 Oct 2016 11:25:52 -0700 Subject: kvm: x86: Check memopp before dereference (CVE-2016-8630) Commit 41061cdb98 ("KVM: emulate: do not initialize memopp") removes a check for non-NULL under incorrect assumptions. An undefined instruction with a ModR/M byte with Mod=0 and R/M-5 (e.g. 0xc7 0x15) will attempt to dereference a null pointer here. Fixes: 41061cdb98a0bec464278b4db8e894a3121671f5 Message-Id: <1477592752-126650-2-git-send-email-osh@google.com> Signed-off-by: Owen Hofmann Signed-off-by: Paolo Bonzini --- arch/x86/kvm/emulate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 4e95d3eb2955..cbd7b92585bb 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -5045,7 +5045,7 @@ done_prefixes: /* Decode and fetch the destination operand: register or memory. */ rc = decode_operand(ctxt, &ctxt->dst, (ctxt->d >> DstShift) & OpMask); - if (ctxt->rip_relative) + if (ctxt->rip_relative && likely(ctxt->memopp)) ctxt->memopp->addr.mem.ea = address_mask(ctxt, ctxt->memopp->addr.mem.ea + ctxt->_eip); -- cgit From 6f63d0f6be4e48b3042df9541694f6f2c405017e Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 28 Oct 2016 20:56:07 +0200 Subject: parisc: use KERN_CONT when printing device inventory Recent changes to printk require KERN_CONT uses to continue logging messages. So add KERN_CONT to output of device inventory. Signed-off-by: Helge Deller --- arch/parisc/kernel/drivers.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index f8150669b8c6..700e2d2da096 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -873,11 +873,11 @@ static void print_parisc_device(struct parisc_device *dev) if (dev->num_addrs) { int k; - printk(", additional addresses: "); + pr_cont(", additional addresses: "); for (k = 0; k < dev->num_addrs; k++) - printk("0x%lx ", dev->addr[k]); + pr_cont("0x%lx ", dev->addr[k]); } - printk("\n"); + pr_cont("\n"); } /** -- cgit From f4125cfdb3008363137f744c101e5d76ead760ba Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Fri, 28 Oct 2016 22:13:42 +0200 Subject: parisc: Avoid trashing sr2 and sr3 in LWS code There is no need to trash sr2 and sr3 in the Light-weight syscall (LWS). sr2 already points to kernel space (it's zero in userspace, otherwise syscalls wouldn't work), and since the LWS code is executed in userspace, we can simply ignore to preload sr3. Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/kernel/syscall.S | 53 ++++++++++++++++++++------------------------ 1 file changed, 24 insertions(+), 29 deletions(-) diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index d03422e5f188..40190dbecdc0 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -474,11 +474,6 @@ lws_start: comiclr,>> __NR_lws_entries, %r20, %r0 b,n lws_exit_nosys - /* WARNING: Trashing sr2 and sr3 */ - mfsp %sr7,%r1 /* get userspace into sr3 */ - mtsp %r1,%sr3 - mtsp %r0,%sr2 /* get kernel space into sr2 */ - /* Load table start */ ldil L%lws_table, %r1 ldo R%lws_table(%r1), %r28 /* Scratch use of r28 */ @@ -627,9 +622,9 @@ cas_action: stw %r1, 4(%sr2,%r20) #endif /* The load and store could fail */ -1: ldw,ma 0(%sr3,%r26), %r28 +1: ldw,ma 0(%r26), %r28 sub,<> %r28, %r25, %r0 -2: stw,ma %r24, 0(%sr3,%r26) +2: stw,ma %r24, 0(%r26) /* Free lock */ stw,ma %r20, 0(%sr2,%r20) #if ENABLE_LWS_DEBUG @@ -706,9 +701,9 @@ lws_compare_and_swap_2: nop /* 8bit load */ -4: ldb 0(%sr3,%r25), %r25 +4: ldb 0(%r25), %r25 b cas2_lock_start -5: ldb 0(%sr3,%r24), %r24 +5: ldb 0(%r24), %r24 nop nop nop @@ -716,9 +711,9 @@ lws_compare_and_swap_2: nop /* 16bit load */ -6: ldh 0(%sr3,%r25), %r25 +6: ldh 0(%r25), %r25 b cas2_lock_start -7: ldh 0(%sr3,%r24), %r24 +7: ldh 0(%r24), %r24 nop nop nop @@ -726,9 +721,9 @@ lws_compare_and_swap_2: nop /* 32bit load */ -8: ldw 0(%sr3,%r25), %r25 +8: ldw 0(%r25), %r25 b cas2_lock_start -9: ldw 0(%sr3,%r24), %r24 +9: ldw 0(%r24), %r24 nop nop nop @@ -737,14 +732,14 @@ lws_compare_and_swap_2: /* 64bit load */ #ifdef CONFIG_64BIT -10: ldd 0(%sr3,%r25), %r25 -11: ldd 0(%sr3,%r24), %r24 +10: ldd 0(%r25), %r25 +11: ldd 0(%r24), %r24 #else /* Load new value into r22/r23 - high/low */ -10: ldw 0(%sr3,%r25), %r22 -11: ldw 4(%sr3,%r25), %r23 +10: ldw 0(%r25), %r22 +11: ldw 4(%r25), %r23 /* Load new value into fr4 for atomic store later */ -12: flddx 0(%sr3,%r24), %fr4 +12: flddx 0(%r24), %fr4 #endif cas2_lock_start: @@ -794,30 +789,30 @@ cas2_action: ldo 1(%r0),%r28 /* 8bit CAS */ -13: ldb,ma 0(%sr3,%r26), %r29 +13: ldb,ma 0(%r26), %r29 sub,= %r29, %r25, %r0 b,n cas2_end -14: stb,ma %r24, 0(%sr3,%r26) +14: stb,ma %r24, 0(%r26) b cas2_end copy %r0, %r28 nop nop /* 16bit CAS */ -15: ldh,ma 0(%sr3,%r26), %r29 +15: ldh,ma 0(%r26), %r29 sub,= %r29, %r25, %r0 b,n cas2_end -16: sth,ma %r24, 0(%sr3,%r26) +16: sth,ma %r24, 0(%r26) b cas2_end copy %r0, %r28 nop nop /* 32bit CAS */ -17: ldw,ma 0(%sr3,%r26), %r29 +17: ldw,ma 0(%r26), %r29 sub,= %r29, %r25, %r0 b,n cas2_end -18: stw,ma %r24, 0(%sr3,%r26) +18: stw,ma %r24, 0(%r26) b cas2_end copy %r0, %r28 nop @@ -825,22 +820,22 @@ cas2_action: /* 64bit CAS */ #ifdef CONFIG_64BIT -19: ldd,ma 0(%sr3,%r26), %r29 +19: ldd,ma 0(%r26), %r29 sub,*= %r29, %r25, %r0 b,n cas2_end -20: std,ma %r24, 0(%sr3,%r26) +20: std,ma %r24, 0(%r26) copy %r0, %r28 #else /* Compare first word */ -19: ldw,ma 0(%sr3,%r26), %r29 +19: ldw,ma 0(%r26), %r29 sub,= %r29, %r22, %r0 b,n cas2_end /* Compare second word */ -20: ldw,ma 4(%sr3,%r26), %r29 +20: ldw,ma 4(%r26), %r29 sub,= %r29, %r23, %r0 b,n cas2_end /* Perform the store */ -21: fstdx %fr4, 0(%sr3,%r26) +21: fstdx %fr4, 0(%r26) copy %r0, %r28 #endif -- cgit From 6ed518328d0189e0fdf1bb7c73290d546143ea66 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Fri, 28 Oct 2016 23:00:34 -0400 Subject: parisc: Ensure consistent state when switching to kernel stack at syscall entry We have one critical section in the syscall entry path in which we switch from the userspace stack to kernel stack. In the event of an external interrupt, the interrupt code distinguishes between those two states by analyzing the value of sr7. If sr7 is zero, it uses the kernel stack. Therefore it's important, that the value of sr7 is in sync with the currently enabled stack. This patch now disables interrupts while executing the critical section. This prevents the interrupt handler to possibly see an inconsistent state which in the worst case can lead to crashes. Interestingly, in the syscall exit path interrupts were already disabled in the critical section which switches back to the userspace stack. Cc: Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/kernel/syscall.S | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index 40190dbecdc0..deec1f8465e5 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -106,8 +106,6 @@ linux_gateway_entry: mtsp %r0,%sr4 /* get kernel space into sr4 */ mtsp %r0,%sr5 /* get kernel space into sr5 */ mtsp %r0,%sr6 /* get kernel space into sr6 */ - mfsp %sr7,%r1 /* save user sr7 */ - mtsp %r1,%sr3 /* and store it in sr3 */ #ifdef CONFIG_64BIT /* for now we can *always* set the W bit on entry to the syscall @@ -133,6 +131,14 @@ linux_gateway_entry: depdi 0, 31, 32, %r21 1: #endif + + /* We use a rsm/ssm pair to prevent sr3 from being clobbered + * by external interrupts. + */ + mfsp %sr7,%r1 /* save user sr7 */ + rsm PSW_SM_I, %r0 /* disable interrupts */ + mtsp %r1,%sr3 /* and store it in sr3 */ + mfctl %cr30,%r1 xor %r1,%r30,%r30 /* ye olde xor trick */ xor %r1,%r30,%r1 @@ -147,6 +153,7 @@ linux_gateway_entry: */ mtsp %r0,%sr7 /* get kernel space into sr7 */ + ssm PSW_SM_I, %r0 /* enable interrupts */ STREGM %r1,FRAME_SIZE(%r30) /* save r1 (usp) here for now */ mfctl %cr30,%r1 /* get task ptr in %r1 */ LDREG TI_TASK(%r1),%r1 -- cgit From 6a6e2a14bbc06a627acc71108808fdc866078db4 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 29 Oct 2016 23:52:43 +0200 Subject: parisc: Use LINUX_GATEWAY_ADDR define instead of hardcoded value LINUX_GATEWAY_ADDR is defined in unistd.h. Let's use it. Signed-off-by: Helge Deller --- arch/parisc/kernel/syscall.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index deec1f8465e5..23de307c3052 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -100,7 +100,7 @@ set_thread_pointer: .endr /* This address must remain fixed at 0x100 for glibc's syscalls to work */ - .align 256 + .align LINUX_GATEWAY_ADDR linux_gateway_entry: gate .+8, %r0 /* become privileged */ mtsp %r0,%sr4 /* get kernel space into sr4 */ -- cgit From 18088db042dd9ae25e8a1e069eb3a16db601ef8a Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 29 Oct 2016 23:47:57 +0200 Subject: parisc: Ignore the pkey system calls for now Signed-off-by: Helge Deller --- arch/parisc/include/uapi/asm/unistd.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/parisc/include/uapi/asm/unistd.h b/arch/parisc/include/uapi/asm/unistd.h index a9b9407f38f7..6b0741e7a7ed 100644 --- a/arch/parisc/include/uapi/asm/unistd.h +++ b/arch/parisc/include/uapi/asm/unistd.h @@ -368,7 +368,9 @@ #define __IGNORE_select /* newselect */ #define __IGNORE_fadvise64 /* fadvise64_64 */ - +#define __IGNORE_pkey_mprotect +#define __IGNORE_pkey_alloc +#define __IGNORE_pkey_free #define LINUX_GATEWAY_ADDR 0x100 -- cgit From eed6f0eda0a009c282bcdd828c273e1239ae0cac Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 18 Oct 2016 15:32:30 -0200 Subject: virtio-gpu: fix vblank events virtio-gpu sends vblank events in virtio_gpu_crtc_atomic_flush, and because of that it must be called for disabled planes too. Ask drm_atomic_helper_commit_planes to do that. v2: update to use new drm_atomic_helper_commit_planes() API. Signed-off-by: Gerd Hoffmann Signed-off-by: Gustavo Padovan Signed-off-by: Dave Airlie --- drivers/gpu/drm/virtio/virtgpu_display.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/virtio/virtgpu_display.c b/drivers/gpu/drm/virtio/virtgpu_display.c index 7cf3678623c3..58048709c34e 100644 --- a/drivers/gpu/drm/virtio/virtgpu_display.c +++ b/drivers/gpu/drm/virtio/virtgpu_display.c @@ -338,8 +338,7 @@ static void vgdev_atomic_commit_tail(struct drm_atomic_state *state) drm_atomic_helper_commit_modeset_disables(dev, state); drm_atomic_helper_commit_modeset_enables(dev, state); - drm_atomic_helper_commit_planes(dev, state, - DRM_PLANE_COMMIT_ACTIVE_ONLY); + drm_atomic_helper_commit_planes(dev, state, 0); drm_atomic_helper_commit_hw_done(state); -- cgit From 382005027fedc50b28d40ae64ef1461cca38953e Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Wed, 2 Nov 2016 19:50:29 +0900 Subject: sched/core: Fix oops in sched_show_task() When CONFIG_THREAD_INFO_IN_TASK=y, it is possible that an exited thread remains in the task list after its stack pointer was already set to NULL. Therefore, thread_saved_pc() and stack_not_used() in sched_show_task() will trigger NULL pointer dereference if an attempt to dump such thread's traces (e.g. SysRq-t, khungtaskd) is made. Since show_stack() in sched_show_task() calls try_get_task_stack() and sched_show_task() is called from interrupt context, calling try_get_task_stack() from sched_show_task() will be safe as well. Signed-off-by: Tetsuo Handa Acked-by: Andy Lutomirski Acked-by: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: bp@alien8.de Cc: brgerst@gmail.com Cc: jann@thejh.net Cc: keescook@chromium.org Cc: linux-api@vger.kernel.org Cc: tycho.andersen@canonical.com Link: http://lkml.kernel.org/r/201611021950.FEJ34368.HFFJOOMLtQOVSF@I-love.SAKURA.ne.jp Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 42d4027f9e26..9abf66b6c271 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5192,6 +5192,8 @@ void sched_show_task(struct task_struct *p) int ppid; unsigned long state = p->state; + if (!try_get_task_stack(p)) + return; if (state) state = __ffs(state) + 1; printk(KERN_INFO "%-15.15s %c", p->comm, @@ -5221,6 +5223,7 @@ void sched_show_task(struct task_struct *p) print_worker_info(KERN_INFO, p); show_stack(p, NULL); + put_task_stack(p); } void show_state_filter(unsigned long state_filter) -- cgit From 8243d5597793b5e85143c9a935e1b971c59740a9 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 1 Nov 2016 17:47:18 -0600 Subject: sched/core: Remove pointless printout in sched_show_task() In sched_show_task() we print out a useless hex number, not even a symbol, and there's a big question mark whether this even makes sense anyway, I suspect we should just remove it all. Signed-off-by: Linus Torvalds Acked-by: Andy Lutomirski Cc: Peter Zijlstra Cc: Tetsuo Handa Cc: Thomas Gleixner Cc: bp@alien8.de Cc: brgerst@gmail.com Cc: jann@thejh.net Cc: keescook@chromium.org Cc: linux-api@vger.kernel.org Cc: tycho.andersen@canonical.com Link: http://lkml.kernel.org/r/CA+55aFzphURPFzAvU4z6Moy7ZmimcwPuUdYU8bj9z0J+S8X1rw@mail.gmail.com Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 9abf66b6c271..154fd689fe02 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5198,17 +5198,8 @@ void sched_show_task(struct task_struct *p) state = __ffs(state) + 1; printk(KERN_INFO "%-15.15s %c", p->comm, state < sizeof(stat_nam) - 1 ? stat_nam[state] : '?'); -#if BITS_PER_LONG == 32 - if (state == TASK_RUNNING) - printk(KERN_CONT " running "); - else - printk(KERN_CONT " %08lx ", thread_saved_pc(p)); -#else if (state == TASK_RUNNING) printk(KERN_CONT " running task "); - else - printk(KERN_CONT " %016lx ", thread_saved_pc(p)); -#endif #ifdef CONFIG_DEBUG_STACK_USAGE free = stack_not_used(p); #endif -- cgit From 667121ace9dbafb368618dbabcf07901c962ddac Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 29 Oct 2016 21:28:18 +0200 Subject: firewire: net: guard against rx buffer overflows The IP-over-1394 driver firewire-net lacked input validation when handling incoming fragmented datagrams. A maliciously formed fragment with a respectively large datagram_offset would cause a memcpy past the datagram buffer. So, drop any packets carrying a fragment with offset + length larger than datagram_size. In addition, ensure that - GASP header, unfragmented encapsulation header, or fragment encapsulation header actually exists before we access it, - the encapsulated datagram or fragment is of nonzero size. Reported-by: Eyal Itkin Reviewed-by: Eyal Itkin Fixes: CVE 2016-8633 Cc: stable@vger.kernel.org Signed-off-by: Stefan Richter --- drivers/firewire/net.c | 51 ++++++++++++++++++++++++++++++++++---------------- 1 file changed, 35 insertions(+), 16 deletions(-) diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c index 309311b1faae..cbaa8d776d83 100644 --- a/drivers/firewire/net.c +++ b/drivers/firewire/net.c @@ -578,6 +578,9 @@ static int fwnet_incoming_packet(struct fwnet_device *dev, __be32 *buf, int len, int retval; u16 ether_type; + if (len <= RFC2374_UNFRAG_HDR_SIZE) + return 0; + hdr.w0 = be32_to_cpu(buf[0]); lf = fwnet_get_hdr_lf(&hdr); if (lf == RFC2374_HDR_UNFRAG) { @@ -602,7 +605,12 @@ static int fwnet_incoming_packet(struct fwnet_device *dev, __be32 *buf, int len, return fwnet_finish_incoming_packet(net, skb, source_node_id, is_broadcast, ether_type); } + /* A datagram fragment has been received, now the fun begins. */ + + if (len <= RFC2374_FRAG_HDR_SIZE) + return 0; + hdr.w1 = ntohl(buf[1]); buf += 2; len -= RFC2374_FRAG_HDR_SIZE; @@ -616,6 +624,9 @@ static int fwnet_incoming_packet(struct fwnet_device *dev, __be32 *buf, int len, datagram_label = fwnet_get_hdr_dgl(&hdr); dg_size = fwnet_get_hdr_dg_size(&hdr); /* ??? + 1 */ + if (fg_off + len > dg_size) + return 0; + spin_lock_irqsave(&dev->lock, flags); peer = fwnet_peer_find_by_node_id(dev, source_node_id, generation); @@ -722,6 +733,22 @@ static void fwnet_receive_packet(struct fw_card *card, struct fw_request *r, fw_send_response(card, r, rcode); } +static int gasp_source_id(__be32 *p) +{ + return be32_to_cpu(p[0]) >> 16; +} + +static u32 gasp_specifier_id(__be32 *p) +{ + return (be32_to_cpu(p[0]) & 0xffff) << 8 | + (be32_to_cpu(p[1]) & 0xff000000) >> 24; +} + +static u32 gasp_version(__be32 *p) +{ + return be32_to_cpu(p[1]) & 0xffffff; +} + static void fwnet_receive_broadcast(struct fw_iso_context *context, u32 cycle, size_t header_length, void *header, void *data) { @@ -731,9 +758,6 @@ static void fwnet_receive_broadcast(struct fw_iso_context *context, __be32 *buf_ptr; int retval; u32 length; - u16 source_node_id; - u32 specifier_id; - u32 ver; unsigned long offset; unsigned long flags; @@ -750,22 +774,17 @@ static void fwnet_receive_broadcast(struct fw_iso_context *context, spin_unlock_irqrestore(&dev->lock, flags); - specifier_id = (be32_to_cpu(buf_ptr[0]) & 0xffff) << 8 - | (be32_to_cpu(buf_ptr[1]) & 0xff000000) >> 24; - ver = be32_to_cpu(buf_ptr[1]) & 0xffffff; - source_node_id = be32_to_cpu(buf_ptr[0]) >> 16; - - if (specifier_id == IANA_SPECIFIER_ID && - (ver == RFC2734_SW_VERSION + if (length > IEEE1394_GASP_HDR_SIZE && + gasp_specifier_id(buf_ptr) == IANA_SPECIFIER_ID && + (gasp_version(buf_ptr) == RFC2734_SW_VERSION #if IS_ENABLED(CONFIG_IPV6) - || ver == RFC3146_SW_VERSION + || gasp_version(buf_ptr) == RFC3146_SW_VERSION #endif - )) { - buf_ptr += 2; - length -= IEEE1394_GASP_HDR_SIZE; - fwnet_incoming_packet(dev, buf_ptr, length, source_node_id, + )) + fwnet_incoming_packet(dev, buf_ptr + 2, + length - IEEE1394_GASP_HDR_SIZE, + gasp_source_id(buf_ptr), context->card->generation, true); - } packet.payload_length = dev->rcv_buffer_size; packet.interrupt = 1; -- cgit From e9300a4b7bbae83af1f7703938c94cf6dc6d308f Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 30 Oct 2016 17:32:01 +0100 Subject: firewire: net: fix fragmented datagram_size off-by-one RFC 2734 defines the datagram_size field in fragment encapsulation headers thus: datagram_size: The encoded size of the entire IP datagram. The value of datagram_size [...] SHALL be one less than the value of Total Length in the datagram's IP header (see STD 5, RFC 791). Accordingly, the eth1394 driver of Linux 2.6.36 and older set and got this field with a -/+1 offset: ether1394_tx() /* transmit */ ether1394_encapsulate_prep() hdr->ff.dg_size = dg_size - 1; ether1394_data_handler() /* receive */ if (hdr->common.lf == ETH1394_HDR_LF_FF) dg_size = hdr->ff.dg_size + 1; else dg_size = hdr->sf.dg_size + 1; Likewise, I observe OS X 10.4 and Windows XP Pro SP3 to transmit 1500 byte sized datagrams in fragments with datagram_size=1499 if link fragmentation is required. Only firewire-net sets and gets datagram_size without this offset. The result is lacking interoperability of firewire-net with OS X, Windows XP, and presumably Linux' eth1394. (I did not test with the latter.) For example, FTP data transfers to a Linux firewire-net box with max_rec smaller than the 1500 bytes MTU - from OS X fail entirely, - from Win XP start out with a bunch of fragmented datagrams which time out, then continue with unfragmented datagrams because Win XP temporarily reduces the MTU to 576 bytes. So let's fix firewire-net's datagram_size accessors. Note that firewire-net thereby loses interoperability with unpatched firewire-net, but only if link fragmentation is employed. (This happens with large broadcast datagrams, and with large datagrams on several FireWire CardBus cards with smaller max_rec than equivalent PCI cards, and it can be worked around by setting a small enough MTU.) Cc: stable@vger.kernel.org Signed-off-by: Stefan Richter --- drivers/firewire/net.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c index cbaa8d776d83..15475892af0c 100644 --- a/drivers/firewire/net.c +++ b/drivers/firewire/net.c @@ -73,13 +73,13 @@ struct rfc2734_header { #define fwnet_get_hdr_lf(h) (((h)->w0 & 0xc0000000) >> 30) #define fwnet_get_hdr_ether_type(h) (((h)->w0 & 0x0000ffff)) -#define fwnet_get_hdr_dg_size(h) (((h)->w0 & 0x0fff0000) >> 16) +#define fwnet_get_hdr_dg_size(h) ((((h)->w0 & 0x0fff0000) >> 16) + 1) #define fwnet_get_hdr_fg_off(h) (((h)->w0 & 0x00000fff)) #define fwnet_get_hdr_dgl(h) (((h)->w1 & 0xffff0000) >> 16) -#define fwnet_set_hdr_lf(lf) ((lf) << 30) +#define fwnet_set_hdr_lf(lf) ((lf) << 30) #define fwnet_set_hdr_ether_type(et) (et) -#define fwnet_set_hdr_dg_size(dgs) ((dgs) << 16) +#define fwnet_set_hdr_dg_size(dgs) (((dgs) - 1) << 16) #define fwnet_set_hdr_fg_off(fgo) (fgo) #define fwnet_set_hdr_dgl(dgl) ((dgl) << 16) @@ -622,7 +622,7 @@ static int fwnet_incoming_packet(struct fwnet_device *dev, __be32 *buf, int len, fg_off = fwnet_get_hdr_fg_off(&hdr); } datagram_label = fwnet_get_hdr_dgl(&hdr); - dg_size = fwnet_get_hdr_dg_size(&hdr); /* ??? + 1 */ + dg_size = fwnet_get_hdr_dg_size(&hdr); if (fg_off + len > dg_size) return 0; -- cgit From a79a812131b07254c09cf325ec68c0d05aaed0b5 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Thu, 3 Nov 2016 18:06:13 +0300 Subject: arc: Implement arch-specific dma_map_ops.mmap We used to use generic implementation of dma_map_ops.mmap which is dma_common_mmap() but that only worked for simpler cached mappings when vaddr = paddr. If a driver requests uncached DMA buffer kernel maps it to virtual address so that MMU gets involved and page uncached status takes into account. In that case usage of dma_common_mmap() lead to mapping of vaddr to vaddr for user-space which is obviously wrong. For more detals please refer to verbose explanation here [1]. So here we implement our own version of mmap() which always deals with dma_addr and maps underlying memory to user-space properly (note that DMA buffer mapped to user-space is always uncached because there's no way to properly manage cache from user-space). [1] https://lkml.org/lkml/2016/10/26/973 Reviewed-by: Catalin Marinas Cc: Marek Szyprowski Cc: #4.5+ Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/mm/dma.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c index 60aab5a7522b..cd8aad8226dd 100644 --- a/arch/arc/mm/dma.c +++ b/arch/arc/mm/dma.c @@ -105,6 +105,31 @@ static void arc_dma_free(struct device *dev, size_t size, void *vaddr, __free_pages(page, get_order(size)); } +static int arc_dma_mmap(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t dma_addr, size_t size, + unsigned long attrs) +{ + unsigned long user_count = vma_pages(vma); + unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT; + unsigned long pfn = __phys_to_pfn(plat_dma_to_phys(dev, dma_addr)); + unsigned long off = vma->vm_pgoff; + int ret = -ENXIO; + + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret)) + return ret; + + if (off < count && user_count <= (count - off)) { + ret = remap_pfn_range(vma, vma->vm_start, + pfn + off, + user_count << PAGE_SHIFT, + vma->vm_page_prot); + } + + return ret; +} + /* * streaming DMA Mapping API... * CPU accesses page via normal paddr, thus needs to explicitly made @@ -193,6 +218,7 @@ static int arc_dma_supported(struct device *dev, u64 dma_mask) struct dma_map_ops arc_dma_ops = { .alloc = arc_dma_alloc, .free = arc_dma_free, + .mmap = arc_dma_mmap, .map_page = arc_dma_map_page, .map_sg = arc_dma_map_sg, .sync_single_for_device = arc_dma_sync_single_for_device, -- cgit From 5459ada2b3cd69e6bf1b0c034feb810975d0072b Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Thu, 27 Oct 2016 16:49:20 -0700 Subject: HID: sensor-hub: Fix packing of result buffer for feature report When report count is more than one and report size is not 4 bytes, then we need some packing into result buffer from the caller of function sensor_hub_get_feature. By default the value extracted from a field is 4 bytes from hid core (using hid_hw_request(hsdev->hdev, report, HID_REQ_GET_REPORT)), even if report size if less than 4 byte. So when we copy data to user buffer in sensor_hub_get_feature, we need to only copy report size bytes even when report count is more than 1. This is not an issue for most of the sensor hub fields as report count will be 1 where we already copy only report size bytes, but some string fields like description, it is a problem as the report count will be more than 1. For example: Field(6) Physical(Sensor.OtherCustom) Application(Sensor.Sensor) Usage(11) Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Report Size(16) Report Count(11) Here since the report size is 2 bytes, we will have 2 additional bytes of 0s copied into user buffer, if we directly copy to user buffer from report->field[]->value This change will copy report size bytes into the buffer of caller for each usage report->field[]->value. So for example without this change, the data displayed for a custom sensor field "sensor-model": 76 00 101 00 110 00 111 00 118 00 111 (truncated to report count of 11) With change 76 101 110 111 118 111 32 89 111 103 97 ("Lenovo Yoga" in ASCII ) Signed-off-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/hid-sensor-hub.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index 658a607dc6d9..c5c3d6111729 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -251,6 +251,9 @@ int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev); int report_size; int ret = 0; + u8 *val_ptr; + int buffer_index = 0; + int i; mutex_lock(&data->mutex); report = sensor_hub_report(report_id, hsdev->hdev, HID_FEATURE_REPORT); @@ -271,7 +274,17 @@ int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, goto done_proc; } ret = min(report_size, buffer_size); - memcpy(buffer, report->field[field_index]->value, ret); + + val_ptr = (u8 *)report->field[field_index]->value; + for (i = 0; i < report->field[field_index]->report_count; ++i) { + if (buffer_index >= ret) + break; + + memcpy(&((u8 *)buffer)[buffer_index], val_ptr, + report->field[field_index]->report_size / 8); + val_ptr += sizeof(__s32); + buffer_index += (report->field[field_index]->report_size / 8); + } done_proc: mutex_unlock(&data->mutex); -- cgit From 1793e1c5217c2dc447d79720399a1d4e60c47761 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 29 Oct 2016 13:17:40 +0200 Subject: HID: intel-ish-hid: Fix !CONFIG_PM build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix drivers/hid/intel-ish-hid/ipc/pci-ish.c:247:12: warning: ‘ish_suspend’ defined but not used [-Wunused-function] static int ish_suspend(struct device *device) ^ drivers/hid/intel-ish-hid/ipc/pci-ish.c:282:12: warning: ‘ish_resume’ defined but not used [-Wunused-function] static int ish_resume(struct device *device) ^ by sticking them in the CONFIG_PM range too. Signed-off-by: Borislav Petkov Cc: Srinivas Pandruvada Cc: Jiri Kosina Cc: Benjamin Tissoires Cc: Wei Yongjun Cc: linux-input@vger.kernel.org Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ipc/pci-ish.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c index 42f0beeb09fd..7e3622a724aa 100644 --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c @@ -202,6 +202,7 @@ static void ish_remove(struct pci_dev *pdev) kfree(ishtp_dev); } +#ifdef CONFIG_PM static struct device *ish_resume_device; /** @@ -293,7 +294,6 @@ static int ish_resume(struct device *device) return 0; } -#ifdef CONFIG_PM static const struct dev_pm_ops ish_pm_ops = { .suspend = ish_suspend, .resume = ish_resume, @@ -301,7 +301,7 @@ static const struct dev_pm_ops ish_pm_ops = { #define ISHTP_ISH_PM_OPS (&ish_pm_ops) #else #define ISHTP_ISH_PM_OPS NULL -#endif +#endif /* CONFIG_PM */ static struct pci_driver ish_driver = { .name = KBUILD_MODNAME, -- cgit From cf0ea4da4c7df11f7a508b2f37518e0f117f3791 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 3 Nov 2016 12:31:41 +0100 Subject: HID: usbhid: add ATEN CS962 to list of quirky devices Like many similar devices it needs a quirk to work. Issuing the request gets the device into an irrecoverable state. Signed-off-by: Oliver Neukum CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 6cfb5cacc253..575aa65436d1 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -179,6 +179,7 @@ #define USB_DEVICE_ID_ATEN_4PORTKVM 0x2205 #define USB_DEVICE_ID_ATEN_4PORTKVMC 0x2208 #define USB_DEVICE_ID_ATEN_CS682 0x2213 +#define USB_DEVICE_ID_ATEN_CS692 0x8021 #define USB_VENDOR_ID_ATMEL 0x03eb #define USB_DEVICE_ID_ATMEL_MULTITOUCH 0x211c diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 354d49ea36dd..e6cfd323babc 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -63,6 +63,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS682, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS692, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FIGHTERSTICK, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET }, -- cgit From 14135f30e33ce37b22529f73660d7369cf424375 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 1 Nov 2016 16:04:36 -0700 Subject: inet: fix sleeping inside inet_wait_for_connect() Andrey reported this kernel warning: WARNING: CPU: 0 PID: 4608 at kernel/sched/core.c:7724 __might_sleep+0x14c/0x1a0 kernel/sched/core.c:7719 do not call blocking ops when !TASK_RUNNING; state=1 set at [] prepare_to_wait+0xbc/0x210 kernel/sched/wait.c:178 Modules linked in: CPU: 0 PID: 4608 Comm: syz-executor Not tainted 4.9.0-rc2+ #320 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006625f7a0 ffffffff81b46914 ffff88006625f818 0000000000000000 ffffffff84052960 0000000000000000 ffff88006625f7e8 ffffffff81111237 ffff88006aceac00 ffffffff00001e2c ffffed000cc4beff ffffffff84052960 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [] dump_stack+0xb3/0x10f lib/dump_stack.c:51 [] __warn+0x1a7/0x1f0 kernel/panic.c:550 [] warn_slowpath_fmt+0xac/0xd0 kernel/panic.c:565 [] __might_sleep+0x14c/0x1a0 kernel/sched/core.c:7719 [< inline >] slab_pre_alloc_hook mm/slab.h:393 [< inline >] slab_alloc_node mm/slub.c:2634 [< inline >] slab_alloc mm/slub.c:2716 [] __kmalloc_track_caller+0x150/0x2a0 mm/slub.c:4240 [] kmemdup+0x24/0x50 mm/util.c:113 [] dccp_feat_clone_sp_val.part.5+0x4f/0xe0 net/dccp/feat.c:374 [< inline >] dccp_feat_clone_sp_val net/dccp/feat.c:1141 [< inline >] dccp_feat_change_recv net/dccp/feat.c:1141 [] dccp_feat_parse_options+0xaa1/0x13d0 net/dccp/feat.c:1411 [] dccp_parse_options+0x721/0x1010 net/dccp/options.c:128 [] dccp_rcv_state_process+0x200/0x15b0 net/dccp/input.c:644 [] dccp_v4_do_rcv+0xf4/0x1a0 net/dccp/ipv4.c:681 [< inline >] sk_backlog_rcv ./include/net/sock.h:872 [] __release_sock+0x126/0x3a0 net/core/sock.c:2044 [] release_sock+0x59/0x1c0 net/core/sock.c:2502 [< inline >] inet_wait_for_connect net/ipv4/af_inet.c:547 [] __inet_stream_connect+0x5d2/0xbb0 net/ipv4/af_inet.c:617 [] inet_stream_connect+0x55/0xa0 net/ipv4/af_inet.c:656 [] SYSC_connect+0x244/0x2f0 net/socket.c:1533 [] SyS_connect+0x24/0x30 net/socket.c:1514 [] entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:209 Unlike commit 26cabd31259ba43f68026ce3f62b78094124333f ("sched, net: Clean up sk_wait_event() vs. might_sleep()"), the sleeping function is called before schedule_timeout(), this is indeed a bug. Fix this by moving the wait logic to the new API, it is similar to commit ff960a731788a7408b6f66ec4fd772ff18833211 ("netdev, sched/wait: Fix sleeping inside wait event"). Reported-by: Andrey Konovalov Cc: Andrey Konovalov Cc: Eric Dumazet Cc: Peter Zijlstra Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/ipv4/af_inet.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 9648c97e541f..5ddf5cda07f4 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -533,9 +533,9 @@ EXPORT_SYMBOL(inet_dgram_connect); static long inet_wait_for_connect(struct sock *sk, long timeo, int writebias) { - DEFINE_WAIT(wait); + DEFINE_WAIT_FUNC(wait, woken_wake_function); - prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE); + add_wait_queue(sk_sleep(sk), &wait); sk->sk_write_pending += writebias; /* Basic assumption: if someone sets sk->sk_err, he _must_ @@ -545,13 +545,12 @@ static long inet_wait_for_connect(struct sock *sk, long timeo, int writebias) */ while ((1 << sk->sk_state) & (TCPF_SYN_SENT | TCPF_SYN_RECV)) { release_sock(sk); - timeo = schedule_timeout(timeo); + timeo = wait_woken(&wait, TASK_INTERRUPTIBLE, timeo); lock_sock(sk); if (signal_pending(current) || !timeo) break; - prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE); } - finish_wait(sk_sleep(sk), &wait); + remove_wait_queue(sk_sleep(sk), &wait); sk->sk_write_pending -= writebias; return timeo; } -- cgit From 0b53df1e9e07984a93ad3454686740fc2f4d6b4b Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Wed, 2 Nov 2016 10:52:53 +0530 Subject: cxgb4: correct device ID of T6 adapter Signed-off-by: Hariprasad Shenai Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h b/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h index 50812a1d67bd..df1573c4a659 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h @@ -178,9 +178,9 @@ CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN CH_PCI_ID_TABLE_FENTRY(0x6005), CH_PCI_ID_TABLE_FENTRY(0x6006), CH_PCI_ID_TABLE_FENTRY(0x6007), + CH_PCI_ID_TABLE_FENTRY(0x6008), CH_PCI_ID_TABLE_FENTRY(0x6009), CH_PCI_ID_TABLE_FENTRY(0x600d), - CH_PCI_ID_TABLE_FENTRY(0x6010), CH_PCI_ID_TABLE_FENTRY(0x6011), CH_PCI_ID_TABLE_FENTRY(0x6014), CH_PCI_ID_TABLE_FENTRY(0x6015), -- cgit From 9512925a2cc2b1cd0206bb93bad200a69716f998 Mon Sep 17 00:00:00 2001 From: "Mintz, Yuval" Date: Wed, 2 Nov 2016 16:36:46 +0200 Subject: qede: Correctly map aggregation replacement pages Driver allocates replacement buffers before-hand to make sure whenever an aggregation begins there would be a replacement for the Rx buffers, as we can't release the buffer until aggregation is terminated and driver logic assumes the Rx rings are always full. For every other Rx page that's being allocated [I.e., regular] the page is being completely mapped while for the replacement buffers only the first portion of the page is being mapped. This means that: a. Once replacement buffer replenishes the regular Rx ring, assuming there's more than a single packet on page we'd post unmapped memory toward HW [assuming mapping is actually done in granularity smaller than page]. b. Unmaps are being done for the entire page, which is incorrect. Fixes: 55482edc25f06 ("qede: Add slowpath/fastpath support and enable hardware GRO") Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 7def29aaf65c..85f46dbecd5b 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -2839,7 +2839,7 @@ static int qede_alloc_sge_mem(struct qede_dev *edev, struct qede_rx_queue *rxq) } mapping = dma_map_page(&edev->pdev->dev, replace_buf->data, 0, - rxq->rx_buf_size, DMA_FROM_DEVICE); + PAGE_SIZE, DMA_FROM_DEVICE); if (unlikely(dma_mapping_error(&edev->pdev->dev, mapping))) { DP_NOTICE(edev, "Failed to map TPA replacement buffer\n"); -- cgit From ac9e70b17ecd7c6e933ff2eaf7ab37429e71bf4d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Nov 2016 07:53:17 -0700 Subject: tcp: fix potential memory corruption MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Imagine initial value of max_skb_frags is 17, and last skb in write queue has 15 frags. Then max_skb_frags is lowered to 14 or smaller value. tcp_sendmsg() will then be allowed to add additional page frags and eventually go past MAX_SKB_FRAGS, overflowing struct skb_shared_info. Fixes: 5f74f82ea34c ("net:Add sysctl_max_skb_frags") Signed-off-by: Eric Dumazet Cc: Hans Westgaard Ry Cc: Håkon Bugge Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 3251fe71f39f..18238ef8135a 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1241,7 +1241,7 @@ new_segment: if (!skb_can_coalesce(skb, i, pfrag->page, pfrag->offset)) { - if (i == sysctl_max_skb_frags || !sg) { + if (i >= sysctl_max_skb_frags || !sg) { tcp_mark_push(tp, skb); goto new_segment; } -- cgit From da96786e26c3ae47316db2b92046b11268c4379c Mon Sep 17 00:00:00 2001 From: David Ahern Date: Wed, 2 Nov 2016 12:08:25 -0700 Subject: net: tcp: check skb is non-NULL for exact match on lookups Andrey reported the following error report while running the syzkaller fuzzer: general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 648 Comm: syz-executor Not tainted 4.9.0-rc3+ #333 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8800398c4480 task.stack: ffff88003b468000 RIP: 0010:[] [< inline >] inet_exact_dif_match include/net/tcp.h:808 RIP: 0010:[] [] __inet_lookup_listener+0xb6/0x500 net/ipv4/inet_hashtables.c:219 RSP: 0018:ffff88003b46f270 EFLAGS: 00010202 RAX: 0000000000000004 RBX: 0000000000004242 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffc90000e3c000 RDI: 0000000000000054 RBP: ffff88003b46f2d8 R08: 0000000000004000 R09: ffffffff830910e7 R10: 0000000000000000 R11: 000000000000000a R12: ffffffff867fa0c0 R13: 0000000000004242 R14: 0000000000000003 R15: dffffc0000000000 FS: 00007fb135881700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020cc3000 CR3: 000000006d56a000 CR4: 00000000000006f0 Stack: 0000000000000000 000000000601a8c0 0000000000000000 ffffffff00004242 424200003b9083c2 ffff88003def4041 ffffffff84e7e040 0000000000000246 ffff88003a0911c0 0000000000000000 ffff88003a091298 ffff88003b9083ae Call Trace: [] tcp_v4_send_reset+0x584/0x1700 net/ipv4/tcp_ipv4.c:643 [] tcp_v4_rcv+0x198b/0x2e50 net/ipv4/tcp_ipv4.c:1718 [] ip_local_deliver_finish+0x332/0xad0 net/ipv4/ip_input.c:216 ... MD5 has a code path that calls __inet_lookup_listener with a null skb, so inet{6}_exact_dif_match needs to check skb against null before pulling the flag. Fixes: a04a480d4392 ("net: Require exact match for TCP socket lookups if dif is l3mdev") Reported-by: Andrey Konovalov Signed-off-by: David Ahern Tested-by: Andrey Konovalov Signed-off-by: David S. Miller --- include/linux/ipv6.h | 2 +- include/net/tcp.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index ca1ad9ebbc92..a0649973ee5b 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -149,7 +149,7 @@ static inline bool inet6_exact_dif_match(struct net *net, struct sk_buff *skb) { #if defined(CONFIG_NET_L3_MASTER_DEV) if (!net->ipv4.sysctl_tcp_l3mdev_accept && - ipv6_l3mdev_skb(IP6CB(skb)->flags)) + skb && ipv6_l3mdev_skb(IP6CB(skb)->flags)) return true; #endif return false; diff --git a/include/net/tcp.h b/include/net/tcp.h index 5b82d4d94834..304a8e17bc87 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -805,7 +805,7 @@ static inline bool inet_exact_dif_match(struct net *net, struct sk_buff *skb) { #if IS_ENABLED(CONFIG_NET_L3_MASTER_DEV) if (!net->ipv4.sysctl_tcp_l3mdev_accept && - ipv4_l3mdev_skb(TCP_SKB_CB(skb)->header.h4.flags)) + skb && ipv4_l3mdev_skb(TCP_SKB_CB(skb)->header.h4.flags)) return true; #endif return false; -- cgit From 9ee6c5dc816aa8256257f2cd4008a9291ec7e985 Mon Sep 17 00:00:00 2001 From: Lance Richardson Date: Wed, 2 Nov 2016 16:36:17 -0400 Subject: ipv4: allow local fragmentation in ip_finish_output_gso() Some configurations (e.g. geneve interface with default MTU of 1500 over an ethernet interface with 1500 MTU) result in the transmission of packets that exceed the configured MTU. While this should be considered to be a "bad" configuration, it is still allowed and should not result in the sending of packets that exceed the configured MTU. Fix by dropping the assumption in ip_finish_output_gso() that locally originated gso packets will never need fragmentation. Basic testing using iperf (observing CPU usage and bandwidth) have shown no measurable performance impact for traffic not requiring fragmentation. Fixes: c7ba65d7b649 ("net: ip: push gso skb forwarding handling down the stack") Reported-by: Jan Tluka Signed-off-by: Lance Richardson Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- include/net/ip.h | 3 +-- net/ipv4/ip_forward.c | 2 +- net/ipv4/ip_output.c | 6 ++---- net/ipv4/ip_tunnel_core.c | 11 ----------- net/ipv4/ipmr.c | 2 +- 5 files changed, 5 insertions(+), 19 deletions(-) diff --git a/include/net/ip.h b/include/net/ip.h index 5413883ac47f..d3a107850a41 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -47,8 +47,7 @@ struct inet_skb_parm { #define IPSKB_REROUTED BIT(4) #define IPSKB_DOREDIRECT BIT(5) #define IPSKB_FRAG_PMTU BIT(6) -#define IPSKB_FRAG_SEGS BIT(7) -#define IPSKB_L3SLAVE BIT(8) +#define IPSKB_L3SLAVE BIT(7) u16 frag_max_size; }; diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c index 8b4ffd216839..9f0a7b96646f 100644 --- a/net/ipv4/ip_forward.c +++ b/net/ipv4/ip_forward.c @@ -117,7 +117,7 @@ int ip_forward(struct sk_buff *skb) if (opt->is_strictroute && rt->rt_uses_gateway) goto sr_failed; - IPCB(skb)->flags |= IPSKB_FORWARDED | IPSKB_FRAG_SEGS; + IPCB(skb)->flags |= IPSKB_FORWARDED; mtu = ip_dst_mtu_maybe_forward(&rt->dst, true); if (ip_exceeds_mtu(skb, mtu)) { IP_INC_STATS(net, IPSTATS_MIB_FRAGFAILS); diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 03e7f7310423..49714010ac2e 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -239,11 +239,9 @@ static int ip_finish_output_gso(struct net *net, struct sock *sk, struct sk_buff *segs; int ret = 0; - /* common case: fragmentation of segments is not allowed, - * or seglen is <= mtu + /* common case: seglen is <= mtu */ - if (((IPCB(skb)->flags & IPSKB_FRAG_SEGS) == 0) || - skb_gso_validate_mtu(skb, mtu)) + if (skb_gso_validate_mtu(skb, mtu)) return ip_finish_output2(net, sk, skb); /* Slowpath - GSO segment length is exceeding the dst MTU. diff --git a/net/ipv4/ip_tunnel_core.c b/net/ipv4/ip_tunnel_core.c index 777bc1883870..fed3d29f9eb3 100644 --- a/net/ipv4/ip_tunnel_core.c +++ b/net/ipv4/ip_tunnel_core.c @@ -63,7 +63,6 @@ void iptunnel_xmit(struct sock *sk, struct rtable *rt, struct sk_buff *skb, int pkt_len = skb->len - skb_inner_network_offset(skb); struct net *net = dev_net(rt->dst.dev); struct net_device *dev = skb->dev; - int skb_iif = skb->skb_iif; struct iphdr *iph; int err; @@ -73,16 +72,6 @@ void iptunnel_xmit(struct sock *sk, struct rtable *rt, struct sk_buff *skb, skb_dst_set(skb, &rt->dst); memset(IPCB(skb), 0, sizeof(*IPCB(skb))); - if (skb_iif && !(df & htons(IP_DF))) { - /* Arrived from an ingress interface, got encapsulated, with - * fragmentation of encapulating frames allowed. - * If skb is gso, the resulting encapsulated network segments - * may exceed dst mtu. - * Allow IP Fragmentation of segments. - */ - IPCB(skb)->flags |= IPSKB_FRAG_SEGS; - } - /* Push down and install the IP header. */ skb_push(skb, sizeof(struct iphdr)); skb_reset_network_header(skb); diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index 5f006e13de56..27089f5ebbb1 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -1749,7 +1749,7 @@ static void ipmr_queue_xmit(struct net *net, struct mr_table *mrt, vif->dev->stats.tx_bytes += skb->len; } - IPCB(skb)->flags |= IPSKB_FORWARDED | IPSKB_FRAG_SEGS; + IPCB(skb)->flags |= IPSKB_FORWARDED; /* RFC1584 teaches, that DVMRP/PIM router must deliver packets locally * not only before forwarding, but after forwarding on all output -- cgit From 79d8665b9545e128637c51cf7febde9c493b6481 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Nov 2016 14:41:50 -0700 Subject: tcp: fix return value for partial writes After my commit, tcp_sendmsg() might restart its loop after processing socket backlog. If sk_err is set, we blindly return an error, even though we copied data to user space before. We should instead return number of bytes that could be copied, otherwise user space might resend data and corrupt the stream. This might happen if another thread is using recvmsg(MSG_ERRQUEUE) to process timestamps. Issue was diagnosed by Soheil and Willem, big kudos to them ! Fixes: d41a69f1d390f ("tcp: make tcp_sendmsg() aware of socket backlog") Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Cc: Soheil Hassas Yeganeh Cc: Yuchung Cheng Cc: Neal Cardwell Tested-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 18238ef8135a..814af89c1bd3 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1164,7 +1164,7 @@ restart: err = -EPIPE; if (sk->sk_err || (sk->sk_shutdown & SEND_SHUTDOWN)) - goto out_err; + goto do_error; sg = !!(sk->sk_route_caps & NETIF_F_SG); -- cgit From c3f24cfb3e508c70c26ee8569d537c8ca67a36c6 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Nov 2016 17:14:41 -0700 Subject: dccp: do not release listeners too soon Andrey Konovalov reported following error while fuzzing with syzkaller : IPv4: Attempt to release alive inet socket ffff880068e98940 kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 3905 Comm: a.out Not tainted 4.9.0-rc3+ #333 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88006b9e0000 task.stack: ffff880068770000 RIP: 0010:[] [] selinux_socket_sock_rcv_skb+0xff/0x6a0 security/selinux/hooks.c:4639 RSP: 0018:ffff8800687771c8 EFLAGS: 00010202 RAX: ffff88006b9e0000 RBX: 1ffff1000d0eee3f RCX: 1ffff1000d1d312a RDX: 1ffff1000d1d31a6 RSI: dffffc0000000000 RDI: 0000000000000010 RBP: ffff880068777360 R08: 0000000000000000 R09: 0000000000000002 R10: dffffc0000000000 R11: 0000000000000006 R12: ffff880068e98940 R13: 0000000000000002 R14: ffff880068777338 R15: 0000000000000000 FS: 00007f00ff760700(0000) GS:ffff88006cd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020008000 CR3: 000000006a308000 CR4: 00000000000006e0 Stack: ffff8800687771e0 ffffffff812508a5 ffff8800686f3168 0000000000000007 ffff88006ac8cdfc ffff8800665ea500 0000000041b58ab3 ffffffff847b5480 ffffffff819eac60 ffff88006b9e0860 ffff88006b9e0868 ffff88006b9e07f0 Call Trace: [] security_sock_rcv_skb+0x75/0xb0 security/security.c:1317 [] sk_filter_trim_cap+0x67/0x10e0 net/core/filter.c:81 [] __sk_receive_skb+0x30/0xa00 net/core/sock.c:460 [] dccp_v4_rcv+0xdb2/0x1910 net/dccp/ipv4.c:873 [] ip_local_deliver_finish+0x332/0xad0 net/ipv4/ip_input.c:216 [< inline >] NF_HOOK_THRESH ./include/linux/netfilter.h:232 [< inline >] NF_HOOK ./include/linux/netfilter.h:255 [] ip_local_deliver+0x1c2/0x4b0 net/ipv4/ip_input.c:257 [< inline >] dst_input ./include/net/dst.h:507 [] ip_rcv_finish+0x750/0x1c40 net/ipv4/ip_input.c:396 [< inline >] NF_HOOK_THRESH ./include/linux/netfilter.h:232 [< inline >] NF_HOOK ./include/linux/netfilter.h:255 [] ip_rcv+0x96f/0x12f0 net/ipv4/ip_input.c:487 [] __netif_receive_skb_core+0x1897/0x2a50 net/core/dev.c:4213 [] __netif_receive_skb+0x2a/0x170 net/core/dev.c:4251 [] netif_receive_skb_internal+0x1b3/0x390 net/core/dev.c:4279 [] netif_receive_skb+0x48/0x250 net/core/dev.c:4303 [] tun_get_user+0xbd5/0x28a0 drivers/net/tun.c:1308 [] tun_chr_write_iter+0xda/0x190 drivers/net/tun.c:1332 [< inline >] new_sync_write fs/read_write.c:499 [] __vfs_write+0x334/0x570 fs/read_write.c:512 [] vfs_write+0x17b/0x500 fs/read_write.c:560 [< inline >] SYSC_write fs/read_write.c:607 [] SyS_write+0xd4/0x1a0 fs/read_write.c:599 [] entry_SYSCALL_64_fastpath+0x1f/0xc2 It turns out DCCP calls __sk_receive_skb(), and this broke when lookups no longer took a reference on listeners. Fix this issue by adding a @refcounted parameter to __sk_receive_skb(), so that sock_put() is used only when needed. Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Signed-off-by: Eric Dumazet Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: David S. Miller --- include/net/sock.h | 4 ++-- net/core/sock.c | 5 +++-- net/dccp/ipv4.c | 2 +- net/dccp/ipv6.c | 3 ++- 4 files changed, 8 insertions(+), 6 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index 73c6b008f1b7..92b269709b9a 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1596,11 +1596,11 @@ static inline void sock_put(struct sock *sk) void sock_gen_put(struct sock *sk); int __sk_receive_skb(struct sock *sk, struct sk_buff *skb, const int nested, - unsigned int trim_cap); + unsigned int trim_cap, bool refcounted); static inline int sk_receive_skb(struct sock *sk, struct sk_buff *skb, const int nested) { - return __sk_receive_skb(sk, skb, nested, 1); + return __sk_receive_skb(sk, skb, nested, 1, true); } static inline void sk_tx_queue_set(struct sock *sk, int tx_queue) diff --git a/net/core/sock.c b/net/core/sock.c index df171acfe232..5e3ca414357e 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -453,7 +453,7 @@ int sock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb) EXPORT_SYMBOL(sock_queue_rcv_skb); int __sk_receive_skb(struct sock *sk, struct sk_buff *skb, - const int nested, unsigned int trim_cap) + const int nested, unsigned int trim_cap, bool refcounted) { int rc = NET_RX_SUCCESS; @@ -487,7 +487,8 @@ int __sk_receive_skb(struct sock *sk, struct sk_buff *skb, bh_unlock_sock(sk); out: - sock_put(sk); + if (refcounted) + sock_put(sk); return rc; discard_and_relse: kfree_skb(skb); diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index 345a3aeb8c7e..dff7cfab1da4 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -868,7 +868,7 @@ lookup: goto discard_and_relse; nf_reset(skb); - return __sk_receive_skb(sk, skb, 1, dh->dccph_doff * 4); + return __sk_receive_skb(sk, skb, 1, dh->dccph_doff * 4, refcounted); no_dccp_socket: if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 3828f94b234c..09c4e19aa285 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -738,7 +738,8 @@ lookup: if (!xfrm6_policy_check(sk, XFRM_POLICY_IN, skb)) goto discard_and_relse; - return __sk_receive_skb(sk, skb, 1, dh->dccph_doff * 4) ? -1 : 0; + return __sk_receive_skb(sk, skb, 1, dh->dccph_doff * 4, + refcounted) ? -1 : 0; no_dccp_socket: if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) -- cgit From 346da62cc186c4b4b1ac59f87f4482b47a047388 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Nov 2016 18:04:24 -0700 Subject: dccp: do not send reset to already closed sockets Andrey reported following warning while fuzzing with syzkaller WARNING: CPU: 1 PID: 21072 at net/dccp/proto.c:83 dccp_set_state+0x229/0x290 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 21072 Comm: syz-executor Not tainted 4.9.0-rc1+ #293 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88003d4c7738 ffffffff81b474f4 0000000000000003 dffffc0000000000 ffffffff844f8b00 ffff88003d4c7804 ffff88003d4c7800 ffffffff8140c06a 0000000041b58ab3 ffffffff8479ab7d ffffffff8140beae ffffffff8140cd00 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [] dump_stack+0xb3/0x10f lib/dump_stack.c:51 [] panic+0x1bc/0x39d kernel/panic.c:179 [] __warn+0x1cc/0x1f0 kernel/panic.c:542 [] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585 [] dccp_set_state+0x229/0x290 net/dccp/proto.c:83 [] dccp_close+0x612/0xc10 net/dccp/proto.c:1016 [] inet_release+0xef/0x1c0 net/ipv4/af_inet.c:415 [] sock_release+0x8e/0x1d0 net/socket.c:570 [] sock_close+0x16/0x20 net/socket.c:1017 [] __fput+0x29d/0x720 fs/file_table.c:208 [] ____fput+0x15/0x20 fs/file_table.c:244 [] task_work_run+0xf8/0x170 kernel/task_work.c:116 [< inline >] exit_task_work include/linux/task_work.h:21 [] do_exit+0x883/0x2ac0 kernel/exit.c:828 [] do_group_exit+0x10e/0x340 kernel/exit.c:931 [] get_signal+0x634/0x15a0 kernel/signal.c:2307 [] do_signal+0x8d/0x1a30 arch/x86/kernel/signal.c:807 [] exit_to_usermode_loop+0xe5/0x130 arch/x86/entry/common.c:156 [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [] syscall_return_slowpath+0x1a8/0x1e0 arch/x86/entry/common.c:259 [] entry_SYSCALL_64_fastpath+0xc0/0xc2 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Fix this the same way we did for TCP in commit 565b7b2d2e63 ("tcp: do not send reset to already closed sockets") Signed-off-by: Eric Dumazet Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: David S. Miller --- net/dccp/proto.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/dccp/proto.c b/net/dccp/proto.c index 41e65804ddf5..9fe25bf63296 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -1009,6 +1009,10 @@ void dccp_close(struct sock *sk, long timeout) __kfree_skb(skb); } + /* If socket has been already reset kill it. */ + if (sk->sk_state == DCCP_CLOSED) + goto adjudge_to_death; + if (data_was_unread) { /* Unread data was tossed, send an appropriate Reset Code */ DCCP_WARN("ABORT with %u bytes unread\n", data_was_unread); -- cgit From 6706a97fec963d6cb3f7fc2978ec1427b4651214 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Nov 2016 19:00:40 -0700 Subject: dccp: fix out of bound access in dccp_v4_err() dccp_v4_err() does not use pskb_may_pull() and might access garbage. We only need 4 bytes at the beginning of the DCCP header, like TCP, so the 8 bytes pulled in icmp_socket_deliver() are more than enough. This patch might allow to process more ICMP messages, as some routers are still limiting the size of reflected bytes to 28 (RFC 792), instead of extended lengths (RFC 1812 4.3.2.3) Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/dccp/ipv4.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index dff7cfab1da4..b567c8725aea 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -235,7 +235,7 @@ static void dccp_v4_err(struct sk_buff *skb, u32 info) { const struct iphdr *iph = (struct iphdr *)skb->data; const u8 offset = iph->ihl << 2; - const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data + offset); + const struct dccp_hdr *dh; struct dccp_sock *dp; struct inet_sock *inet; const int type = icmp_hdr(skb)->type; @@ -245,11 +245,13 @@ static void dccp_v4_err(struct sk_buff *skb, u32 info) int err; struct net *net = dev_net(skb->dev); - if (skb->len < offset + sizeof(*dh) || - skb->len < offset + __dccp_basic_hdr_len(dh)) { - __ICMP_INC_STATS(net, ICMP_MIB_INERRORS); - return; - } + /* Only need dccph_dport & dccph_sport which are the first + * 4 bytes in dccp header. + * Our caller (icmp_socket_deliver()) already pulled 8 bytes for us. + */ + BUILD_BUG_ON(offsetofend(struct dccp_hdr, dccph_sport) > 8); + BUILD_BUG_ON(offsetofend(struct dccp_hdr, dccph_dport) > 8); + dh = (struct dccp_hdr *)(skb->data + offset); sk = __inet_lookup_established(net, &dccp_hashinfo, iph->daddr, dh->dccph_dport, -- cgit From 93636d1f1f162ae89ae4f2a22a83bf4fd960724e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Nov 2016 20:21:20 -0700 Subject: netlink: netlink_diag_dump() runs without locks A recent commit removed locking from netlink_diag_dump() but forgot one error case. ===================================== [ BUG: bad unlock balance detected! ] 4.9.0-rc3+ #336 Not tainted ------------------------------------- syz-executor/4018 is trying to release lock ([ 36.220068] nl_table_lock ) at: [] netlink_diag_dump+0x1a3/0x250 net/netlink/diag.c:182 but there are no more locks to release! other info that might help us debug this: 3 locks held by syz-executor/4018: #0: [ 36.220068] ( sock_diag_mutex[ 36.220068] ){+.+.+.} , at: [ 36.220068] [] sock_diag_rcv+0x1b/0x40 #1: [ 36.220068] ( sock_diag_table_mutex[ 36.220068] ){+.+.+.} , at: [ 36.220068] [] sock_diag_rcv_msg+0x140/0x3a0 #2: [ 36.220068] ( nlk->cb_mutex[ 36.220068] ){+.+.+.} , at: [ 36.220068] [] netlink_dump+0x50/0xac0 stack backtrace: CPU: 1 PID: 4018 Comm: syz-executor Not tainted 4.9.0-rc3+ #336 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff8800645df688 ffffffff81b46934 ffffffff84eb3e78 ffff88006ad85800 ffffffff82dc8683 ffffffff84eb3e78 ffff8800645df6b8 ffffffff812043ca dffffc0000000000 ffff88006ad85ff8 ffff88006ad85fd0 00000000ffffffff Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [] dump_stack+0xb3/0x10f lib/dump_stack.c:51 [] print_unlock_imbalance_bug+0x17a/0x1a0 kernel/locking/lockdep.c:3388 [< inline >] __lock_release kernel/locking/lockdep.c:3512 [] lock_release+0x8e8/0xc60 kernel/locking/lockdep.c:3765 [< inline >] __raw_read_unlock ./include/linux/rwlock_api_smp.h:225 [] _raw_read_unlock+0x1a/0x30 kernel/locking/spinlock.c:255 [] netlink_diag_dump+0x1a3/0x250 net/netlink/diag.c:182 [] netlink_dump+0x397/0xac0 net/netlink/af_netlink.c:2110 Fixes: ad202074320c ("netlink: Use rhashtable walk interface in diag dump") Signed-off-by: Eric Dumazet Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: David S. Miller --- net/netlink/diag.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/net/netlink/diag.c b/net/netlink/diag.c index b2f0e986a6f4..a5546249fb10 100644 --- a/net/netlink/diag.c +++ b/net/netlink/diag.c @@ -178,11 +178,8 @@ static int netlink_diag_dump(struct sk_buff *skb, struct netlink_callback *cb) } cb->args[1] = i; } else { - if (req->sdiag_protocol >= MAX_LINKS) { - read_unlock(&nl_table_lock); - rcu_read_unlock(); + if (req->sdiag_protocol >= MAX_LINKS) return -ENOENT; - } err = __netlink_diag_dump(skb, cb, req->sdiag_protocol, s_num); } -- cgit From 1aa9d1a0e7eefcc61696e147d123453fc0016005 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Nov 2016 20:30:48 -0700 Subject: ipv6: dccp: fix out of bound access in dccp_v6_err() dccp_v6_err() does not use pskb_may_pull() and might access garbage. We only need 4 bytes at the beginning of the DCCP header, like TCP, so the 8 bytes pulled in icmpv6_notify() are more than enough. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/dccp/ipv6.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 09c4e19aa285..b2a43af967e5 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -70,7 +70,7 @@ static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, u8 type, u8 code, int offset, __be32 info) { const struct ipv6hdr *hdr = (const struct ipv6hdr *)skb->data; - const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data + offset); + const struct dccp_hdr *dh; struct dccp_sock *dp; struct ipv6_pinfo *np; struct sock *sk; @@ -78,12 +78,13 @@ static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, __u64 seq; struct net *net = dev_net(skb->dev); - if (skb->len < offset + sizeof(*dh) || - skb->len < offset + __dccp_basic_hdr_len(dh)) { - __ICMP6_INC_STATS(net, __in6_dev_get(skb->dev), - ICMP6_MIB_INERRORS); - return; - } + /* Only need dccph_dport & dccph_sport which are the first + * 4 bytes in dccp header. + * Our caller (icmpv6_notify()) already pulled 8 bytes for us. + */ + BUILD_BUG_ON(offsetofend(struct dccp_hdr, dccph_sport) > 8); + BUILD_BUG_ON(offsetofend(struct dccp_hdr, dccph_dport) > 8); + dh = (struct dccp_hdr *)(skb->data + offset); sk = __inet6_lookup_established(net, &dccp_hashinfo, &hdr->daddr, dh->dccph_dport, -- cgit From 29ab5a3b94c87382da06db88e96119911d557293 Mon Sep 17 00:00:00 2001 From: "Guilherme G. Piccoli" Date: Thu, 3 Nov 2016 08:16:20 -0200 Subject: ehea: fix operation state report Currently the ehea driver is missing a call to netif_carrier_off() before the interface bring-up; this is necessary in order to initialize the __LINK_STATE_NOCARRIER bit in the net_device state field. Otherwise, we observe state UNKNOWN on "ip address" command output. This patch adds a call to netif_carrier_off() on ehea's net device open callback. Reported-by: Xiong Zhou Reference-ID: IBM bz #137702, Red Hat bz #1089134 Signed-off-by: Guilherme G. Piccoli Signed-off-by: Douglas Miller Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 54efa9a5167b..bd719e25dd76 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -2446,6 +2446,8 @@ static int ehea_open(struct net_device *dev) netif_info(port, ifup, dev, "enabling port\n"); + netif_carrier_off(dev); + ret = ehea_up(dev); if (!ret) { port_napi_enable(port); -- cgit From 990ff4d84408fc55942ca6644f67e361737b3d8e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 3 Nov 2016 08:59:46 -0700 Subject: ipv6: dccp: add missing bind_conflict to dccp_ipv6_mapped While fuzzing kernel with syzkaller, Andrey reported a nasty crash in inet6_bind() caused by DCCP lacking a required method. Fixes: ab1e0a13d7029 ("[SOCK] proto: Add hashinfo member to struct proto") Signed-off-by: Eric Dumazet Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Cc: Arnaldo Carvalho de Melo Acked-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- net/dccp/ipv6.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index b2a43af967e5..715e5d1dc107 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -958,6 +958,7 @@ static const struct inet_connection_sock_af_ops dccp_ipv6_mapped = { .getsockopt = ipv6_getsockopt, .addr2sockaddr = inet6_csk_addr2sockaddr, .sockaddr_len = sizeof(struct sockaddr_in6), + .bind_conflict = inet6_csk_bind_conflict, #ifdef CONFIG_COMPAT .compat_setsockopt = compat_ipv6_setsockopt, .compat_getsockopt = compat_ipv6_getsockopt, -- cgit From 00ffc1ba02d876478c125e4305f9a02d40c6d284 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Thu, 3 Nov 2016 09:42:35 -0700 Subject: genetlink: fix a memory leak on error path In __genl_register_family(), when genl_validate_assign_mc_groups() fails, we forget to free the memory we possibly allocate for family->attrbuf. Note, some callers call genl_unregister_family() to clean up on error path, it doesn't work because the family is inserted to the global list in the nearly last step. Cc: Jakub Kicinski Cc: Johannes Berg Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/netlink/genetlink.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c index 23cc12639ba7..49c28e8ef01b 100644 --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -404,7 +404,7 @@ int __genl_register_family(struct genl_family *family) err = genl_validate_assign_mc_groups(family); if (err) - goto errout_locked; + goto errout_free; list_add_tail(&family->family_list, genl_family_chain(family->id)); genl_unlock_all(); @@ -417,6 +417,8 @@ int __genl_register_family(struct genl_family *family) return 0; +errout_free: + kfree(family->attrbuf); errout_locked: genl_unlock_all(); errout: -- cgit From 243d52126184b072a18fe2130ce0008f8aa3a340 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Thu, 3 Nov 2016 09:42:36 -0700 Subject: taskstats: fix the length of cgroupstats_cmd_get_policy cgroupstats_cmd_get_policy is [CGROUPSTATS_CMD_ATTR_MAX+1], taskstats_cmd_get_policy[TASKSTATS_CMD_ATTR_MAX+1], but their family.maxattr is TASKSTATS_CMD_ATTR_MAX. CGROUPSTATS_CMD_ATTR_MAX is less than TASKSTATS_CMD_ATTR_MAX, so we could end up accessing out-of-bound. Change cgroupstats_cmd_get_policy to TASKSTATS_CMD_ATTR_MAX+1, this is safe because the rest are initialized to 0's. Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- kernel/taskstats.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/kernel/taskstats.c b/kernel/taskstats.c index b3f05ee20d18..cbb387a265db 100644 --- a/kernel/taskstats.c +++ b/kernel/taskstats.c @@ -54,7 +54,11 @@ static const struct nla_policy taskstats_cmd_get_policy[TASKSTATS_CMD_ATTR_MAX+1 [TASKSTATS_CMD_ATTR_REGISTER_CPUMASK] = { .type = NLA_STRING }, [TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK] = { .type = NLA_STRING },}; -static const struct nla_policy cgroupstats_cmd_get_policy[CGROUPSTATS_CMD_ATTR_MAX+1] = { +/* + * We have to use TASKSTATS_CMD_ATTR_MAX here, it is the maxattr in the family. + * Make sure they are always aligned. + */ +static const struct nla_policy cgroupstats_cmd_get_policy[TASKSTATS_CMD_ATTR_MAX+1] = { [CGROUPSTATS_CMD_ATTR_FD] = { .type = NLA_U32 }, }; -- cgit From 682c1e52215da4a3e89c14aad60bfc0d400b025f Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Sat, 15 Oct 2016 23:03:43 +0100 Subject: MIPS: CPC: Provide default mips_cpc_default_phys_base to ignore CPC Provide a default implementation of mips_cpc_default_phys_base() which simply returns 0, and adjust mips_cpc_phys_base() to allow for mips_cpc_default_phys_base() returning 0. This allows kernels which include CPC support to be built without platform code & simply ignore the CPC if it wasn't already enabled by the bootloader. This fixes link failures such as the following from generic defconfigs: arch/mips/built-in.o: In function `mips_cpc_phys_base': arch/mips/kernel/mips-cpc.c:47: undefined reference to `mips_cpc_default_phys_base' [ralf@linux-mips.org: changed prototype for coding style compliance.] Signed-off-by: Paul Burton Reported-by: kbuild test robot Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14401/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/mips-cpc.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c index 2a45867d3b4f..a4964c334cab 100644 --- a/arch/mips/kernel/mips-cpc.c +++ b/arch/mips/kernel/mips-cpc.c @@ -21,6 +21,11 @@ static DEFINE_PER_CPU_ALIGNED(spinlock_t, cpc_core_lock); static DEFINE_PER_CPU_ALIGNED(unsigned long, cpc_core_lock_flags); +phys_addr_t __weak mips_cpc_default_phys_base(void) +{ + return 0; +} + /** * mips_cpc_phys_base - retrieve the physical base address of the CPC * @@ -43,8 +48,12 @@ static phys_addr_t mips_cpc_phys_base(void) if (cpc_base & CM_GCR_CPC_BASE_CPCEN_MSK) return cpc_base & CM_GCR_CPC_BASE_CPCBASE_MSK; - /* Otherwise, give it the default address & enable it */ + /* Otherwise, use the default address */ cpc_base = mips_cpc_default_phys_base(); + if (!cpc_base) + return cpc_base; + + /* Enable the CPC, mapped at the default address */ write_gcr_cpc_base(cpc_base | CM_GCR_CPC_BASE_CPCEN_MSK); return cpc_base; } -- cgit From 93032e31a5f12df847639db3ad0b7f300bf44b7b Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 14 Oct 2016 10:17:32 +0100 Subject: MIPS: Malta: Fixup reboot Commit 10b6ea0959de ("MIPS: Malta: Use syscon-reboot driver to reboot") converted the Malta board to use the generic syscon-reboot driver to handle reboots, but incorrectly used the value 0x4d rather than 0x42 as the magic to write to the reboot register. I also incorrectly believed that syscon/regmap would default to native endianness, but this isn't the case. Force this by specifying with a native-endian property in the devicetree. Signed-off-by: Paul Burton Fixes: 10b6ea0959de ("MIPS: Malta: Use syscon-reboot driver to reboot") Reported-by: Guenter Roeck Cc: linux-mips@linux-mips.org Tested-by: Guenter Roeck Tested-by: Maciej W. Rozycki Patchwork: https://patchwork.linux-mips.org/patch/14396/ Signed-off-by: Ralf Baechle --- arch/mips/boot/dts/mti/malta.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts index f604a272d91d..ffe3a1508e72 100644 --- a/arch/mips/boot/dts/mti/malta.dts +++ b/arch/mips/boot/dts/mti/malta.dts @@ -84,12 +84,13 @@ fpga_regs: system-controller@1f000000 { compatible = "mti,malta-fpga", "syscon", "simple-mfd"; reg = <0x1f000000 0x1000>; + native-endian; reboot { compatible = "syscon-reboot"; regmap = <&fpga_regs>; offset = <0x500>; - mask = <0x4d>; + mask = <0x42>; }; }; -- cgit From 4736697963385e6257ee8e260e97347e858cd962 Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Mon, 17 Oct 2016 17:21:46 +0100 Subject: MIPS: KASLR: Fix handling of NULL FDT If platform code returns a NULL pointer to the FDT, initial_boot_params will not get set to a valid pointer and attempting to find the /chosen node in it will cause a NULL pointer dereference and the kernel to crash immediately on startup - with no output to the console. Fix this by checking that initial_boot_params is valid before using it. Fixes: 405bc8fd12f5 ("MIPS: Kernel: Implement KASLR using CONFIG_RELOCATABLE") Cc: stable@vger.kernel.org # 4.7+ Signed-off-by: Matt Redfearn Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14414/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/relocate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/relocate.c b/arch/mips/kernel/relocate.c index ca1cc30c0891..1958910b75c0 100644 --- a/arch/mips/kernel/relocate.c +++ b/arch/mips/kernel/relocate.c @@ -200,7 +200,7 @@ static inline __init unsigned long get_random_boot(void) #if defined(CONFIG_USE_OF) /* Get any additional entropy passed in device tree */ - { + if (initial_boot_params) { int node, len; u64 *prop; -- cgit From 9a59061cfd7ac00f21111d2e8aa7f4ab11d27f6c Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Mon, 17 Oct 2016 17:25:24 +0100 Subject: MIPS: generic: Fix KASLR for generic kernel. The KASLR code requires that the plat_get_fdt() function return the address of the device tree, and it must be available early in the boot, before prom_init() is called. Move the code determining the address of the device tree into plat_get_fdt, and call that from prom_init(). The fdt pointer will be set up by plat_get_fdt() called from relocate_kernel initially and once the relocated kernel has started, prom_init() will use it again to determine the address in the relocated image. Fixes: eed0eabd12ef ("MIPS: generic: Introduce generic DT-based board support") Signed-off-by: Matt Redfearn Reviewed-by: James Hogan Reviewed-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14415/ Signed-off-by: Ralf Baechle --- arch/mips/generic/init.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/arch/mips/generic/init.c b/arch/mips/generic/init.c index 0ea73e845440..d493ccbf274a 100644 --- a/arch/mips/generic/init.c +++ b/arch/mips/generic/init.c @@ -29,10 +29,20 @@ static __initdata const struct mips_machine *mach; static __initdata const void *mach_match_data; void __init prom_init(void) +{ + plat_get_fdt(); + BUG_ON(!fdt); +} + +void __init *plat_get_fdt(void) { const struct mips_machine *check_mach; const struct of_device_id *match; + if (fdt) + /* Already set up */ + return (void *)fdt; + if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_arg1)) { /* * We booted using the UHI boot protocol, so we have been @@ -75,12 +85,6 @@ void __init prom_init(void) /* Retrieve the machine's FDT */ fdt = mach->fdt; } - - BUG_ON(!fdt); -} - -void __init *plat_get_fdt(void) -{ return (void *)fdt; } -- cgit From 818f38c5b7c4482abd71c64ac4d49911fbefaf9e Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Mon, 17 Oct 2016 10:09:39 +0100 Subject: MIPS: Fix build of compressed image Changes introduced to arch/mips/Makefile for the generic kernel resulted in build errors when making a compressed image if platform-y has multiple values, like this: make[2]: *** No rule to make target `alchemy/'. make[1]: *** [vmlinuz] Error 2 make[1]: Target `_all' not remade because of errors. make: *** [sub-make] Error 2 make: Target `_all' not remade because of errors. Fix this by quoting $(platform-y) as it is passed to the Makefile in arch/mips/boot/compressed/Makefile Reported-by: kernelci.org bot Link: https://storage.kernelci.org/next/next-20161017/mips-gpr_defconfig/build.log Signed-off-by: Matt Redfearn Reviewed-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14405/ Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index fbf40d3c8123..1a6bac7b076f 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -263,7 +263,7 @@ KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0) bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \ VMLINUX_ENTRY_ADDRESS=$(entry-y) \ - PLATFORM=$(platform-y) + PLATFORM="$(platform-y)" ifdef CONFIG_32BIT bootvars-y += ADDR_BITS=32 endif -- cgit From bcf084de5d429c0a321de6e2c508440148da1884 Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Wed, 19 Oct 2016 14:33:20 +0100 Subject: MIPS: traps: Fix output of show_backtrace Since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") the output from show_backtrace on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected output. Signed-off-by: Matt Redfearn Cc: Maciej W. Rozycki Cc: James Hogan Cc: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14429/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 1f5fdee1dfc3..6ae5ea752d4c 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -156,7 +156,7 @@ static void show_backtrace(struct task_struct *task, const struct pt_regs *regs) print_ip_sym(pc); pc = unwind_stack(task, &sp, pc, &ra); } while (pc); - printk("\n"); + pr_cont("\n"); } /* -- cgit From fe4e09e701213213cf2024e2979ea227c2e36c60 Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Wed, 19 Oct 2016 14:33:21 +0100 Subject: MIPS: traps: Fix output of show_stacktrace Since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") the output from show_stacktrace on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected output. Also start a new line with printk such that the presence of timing information does not interfere with output. Signed-off-by: Matt Redfearn Cc: Maciej W. Rozycki Cc: James Hogan Cc: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14430/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 6ae5ea752d4c..25ce866b2895 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -174,22 +174,24 @@ static void show_stacktrace(struct task_struct *task, printk("Stack :"); i = 0; while ((unsigned long) sp & (PAGE_SIZE - 1)) { - if (i && ((i % (64 / field)) == 0)) - printk("\n "); + if (i && ((i % (64 / field)) == 0)) { + pr_cont("\n"); + printk(" "); + } if (i > 39) { - printk(" ..."); + pr_cont(" ..."); break; } if (__get_user(stackdata, sp++)) { - printk(" (Bad stack address)"); + pr_cont(" (Bad stack address)"); break; } - printk(" %0*lx", field, stackdata); + pr_cont(" %0*lx", field, stackdata); i++; } - printk("\n"); + pr_cont("\n"); show_backtrace(task, regs); } -- cgit From 41000c5819ee5aea8c5c3b388e4e21e679c1b95c Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Wed, 19 Oct 2016 14:33:22 +0100 Subject: MIPS: traps: Fix output of show_code Since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") the output from show_code on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected output. Signed-off-by: Matt Redfearn Cc: Maciej W. Rozycki Cc: James Hogan Cc: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14431/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 25ce866b2895..273b4a419f76 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -231,18 +231,19 @@ static void show_code(unsigned int __user *pc) long i; unsigned short __user *pc16 = NULL; - printk("\nCode:"); + printk("Code:"); if ((unsigned long)pc & 1) pc16 = (unsigned short __user *)((unsigned long)pc & ~1); for(i = -3 ; i < 6 ; i++) { unsigned int insn; if (pc16 ? __get_user(insn, pc16 + i) : __get_user(insn, pc + i)) { - printk(" (Bad address in epc)\n"); + pr_cont(" (Bad address in epc)\n"); break; } - printk("%c%0*x%c", (i?' ':'<'), pc16 ? 4 : 8, insn, (i?' ':'>')); + pr_cont("%c%0*x%c", (i?' ':'<'), pc16 ? 4 : 8, insn, (i?' ':'>')); } + pr_cont("\n"); } static void __show_regs(const struct pt_regs *regs) -- cgit From 752f5499823edb0c13c594f739363527178f714d Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Wed, 19 Oct 2016 14:33:23 +0100 Subject: MIPS: Fix __show_regs() output Since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") the output from __show_regs() on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected register output. Signed-off-by: Paul Burton Signed-off-by: Matt Redfearn Cc: Maciej W. Rozycki Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14432/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 42 +++++++++++++++++++++--------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 273b4a419f76..b9a910b208f9 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -262,15 +262,15 @@ static void __show_regs(const struct pt_regs *regs) if ((i % 4) == 0) printk("$%2d :", i); if (i == 0) - printk(" %0*lx", field, 0UL); + pr_cont(" %0*lx", field, 0UL); else if (i == 26 || i == 27) - printk(" %*s", field, ""); + pr_cont(" %*s", field, ""); else - printk(" %0*lx", field, regs->regs[i]); + pr_cont(" %0*lx", field, regs->regs[i]); i++; if ((i % 4) == 0) - printk("\n"); + pr_cont("\n"); } #ifdef CONFIG_CPU_HAS_SMARTMIPS @@ -291,46 +291,46 @@ static void __show_regs(const struct pt_regs *regs) if (cpu_has_3kex) { if (regs->cp0_status & ST0_KUO) - printk("KUo "); + pr_cont("KUo "); if (regs->cp0_status & ST0_IEO) - printk("IEo "); + pr_cont("IEo "); if (regs->cp0_status & ST0_KUP) - printk("KUp "); + pr_cont("KUp "); if (regs->cp0_status & ST0_IEP) - printk("IEp "); + pr_cont("IEp "); if (regs->cp0_status & ST0_KUC) - printk("KUc "); + pr_cont("KUc "); if (regs->cp0_status & ST0_IEC) - printk("IEc "); + pr_cont("IEc "); } else if (cpu_has_4kex) { if (regs->cp0_status & ST0_KX) - printk("KX "); + pr_cont("KX "); if (regs->cp0_status & ST0_SX) - printk("SX "); + pr_cont("SX "); if (regs->cp0_status & ST0_UX) - printk("UX "); + pr_cont("UX "); switch (regs->cp0_status & ST0_KSU) { case KSU_USER: - printk("USER "); + pr_cont("USER "); break; case KSU_SUPERVISOR: - printk("SUPERVISOR "); + pr_cont("SUPERVISOR "); break; case KSU_KERNEL: - printk("KERNEL "); + pr_cont("KERNEL "); break; default: - printk("BAD_MODE "); + pr_cont("BAD_MODE "); break; } if (regs->cp0_status & ST0_ERL) - printk("ERL "); + pr_cont("ERL "); if (regs->cp0_status & ST0_EXL) - printk("EXL "); + pr_cont("EXL "); if (regs->cp0_status & ST0_IE) - printk("IE "); + pr_cont("IE "); } - printk("\n"); + pr_cont("\n"); exccode = (cause & CAUSEF_EXCCODE) >> CAUSEB_EXCCODE; printk("Cause : %08x (ExcCode %02x)\n", cause, exccode); -- cgit From 8a98495c7008d5bdede3d53e05e69ecdc0bc614b Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 21 Oct 2016 20:06:40 +0100 Subject: MIPS: dump_tlb: Fix printk continuations Since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") the output from TLB dumps on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected output. Continuation is also used for the second line of each TLB entry printed in dump_tlb.c even though it has a newline, since it is a continuation of the interpretation of the same TLB entry. For example: [ 46.371884] Index: 0 pgmask=16kb va=77654000 asid=73 gid=00 [ri=0 xi=0 pa=ffc18000 c=5 d=0 v=1 g=0] [ri=0 xi=0 pa=ffc1c000 c=5 d=0 v=1 g=0] [ 46.385380] Index: 12 pgmask=16kb va=004b4000 asid=73 gid=00 [ri=0 xi=0 pa=00000000 c=0 d=0 v=0 g=0] [ri=0 xi=0 pa=ffb00000 c=5 d=1 v=1 g=0] Signed-off-by: James Hogan Cc: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14444/ Signed-off-by: Ralf Baechle --- arch/mips/lib/dump_tlb.c | 44 ++++++++++++++++++++++---------------------- arch/mips/lib/r3k_dump_tlb.c | 18 +++++++++--------- 2 files changed, 31 insertions(+), 31 deletions(-) diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c index 0f80b936e75e..6eb50a7137db 100644 --- a/arch/mips/lib/dump_tlb.c +++ b/arch/mips/lib/dump_tlb.c @@ -135,42 +135,42 @@ static void dump_tlb(int first, int last) c0 = (entrylo0 & ENTRYLO_C) >> ENTRYLO_C_SHIFT; c1 = (entrylo1 & ENTRYLO_C) >> ENTRYLO_C_SHIFT; - printk("va=%0*lx asid=%0*lx", - vwidth, (entryhi & ~0x1fffUL), - asidwidth, entryhi & asidmask); + pr_cont("va=%0*lx asid=%0*lx", + vwidth, (entryhi & ~0x1fffUL), + asidwidth, entryhi & asidmask); if (cpu_has_guestid) - printk(" gid=%02lx", - (guestctl1 & MIPS_GCTL1_RID) + pr_cont(" gid=%02lx", + (guestctl1 & MIPS_GCTL1_RID) >> MIPS_GCTL1_RID_SHIFT); /* RI/XI are in awkward places, so mask them off separately */ pa = entrylo0 & ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI); if (xpa) pa |= (unsigned long long)readx_c0_entrylo0() << 30; pa = (pa << 6) & PAGE_MASK; - printk("\n\t["); + pr_cont("\n\t["); if (cpu_has_rixi) - printk("ri=%d xi=%d ", - (entrylo0 & MIPS_ENTRYLO_RI) ? 1 : 0, - (entrylo0 & MIPS_ENTRYLO_XI) ? 1 : 0); - printk("pa=%0*llx c=%d d=%d v=%d g=%d] [", - pwidth, pa, c0, - (entrylo0 & ENTRYLO_D) ? 1 : 0, - (entrylo0 & ENTRYLO_V) ? 1 : 0, - (entrylo0 & ENTRYLO_G) ? 1 : 0); + pr_cont("ri=%d xi=%d ", + (entrylo0 & MIPS_ENTRYLO_RI) ? 1 : 0, + (entrylo0 & MIPS_ENTRYLO_XI) ? 1 : 0); + pr_cont("pa=%0*llx c=%d d=%d v=%d g=%d] [", + pwidth, pa, c0, + (entrylo0 & ENTRYLO_D) ? 1 : 0, + (entrylo0 & ENTRYLO_V) ? 1 : 0, + (entrylo0 & ENTRYLO_G) ? 1 : 0); /* RI/XI are in awkward places, so mask them off separately */ pa = entrylo1 & ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI); if (xpa) pa |= (unsigned long long)readx_c0_entrylo1() << 30; pa = (pa << 6) & PAGE_MASK; if (cpu_has_rixi) - printk("ri=%d xi=%d ", - (entrylo1 & MIPS_ENTRYLO_RI) ? 1 : 0, - (entrylo1 & MIPS_ENTRYLO_XI) ? 1 : 0); - printk("pa=%0*llx c=%d d=%d v=%d g=%d]\n", - pwidth, pa, c1, - (entrylo1 & ENTRYLO_D) ? 1 : 0, - (entrylo1 & ENTRYLO_V) ? 1 : 0, - (entrylo1 & ENTRYLO_G) ? 1 : 0); + pr_cont("ri=%d xi=%d ", + (entrylo1 & MIPS_ENTRYLO_RI) ? 1 : 0, + (entrylo1 & MIPS_ENTRYLO_XI) ? 1 : 0); + pr_cont("pa=%0*llx c=%d d=%d v=%d g=%d]\n", + pwidth, pa, c1, + (entrylo1 & ENTRYLO_D) ? 1 : 0, + (entrylo1 & ENTRYLO_V) ? 1 : 0, + (entrylo1 & ENTRYLO_G) ? 1 : 0); } printk("\n"); diff --git a/arch/mips/lib/r3k_dump_tlb.c b/arch/mips/lib/r3k_dump_tlb.c index 744f4a7bc49d..85b4086e553e 100644 --- a/arch/mips/lib/r3k_dump_tlb.c +++ b/arch/mips/lib/r3k_dump_tlb.c @@ -53,15 +53,15 @@ static void dump_tlb(int first, int last) */ printk("Index: %2d ", i); - printk("va=%08lx asid=%08lx" - " [pa=%06lx n=%d d=%d v=%d g=%d]", - entryhi & PAGE_MASK, - entryhi & asid_mask, - entrylo0 & PAGE_MASK, - (entrylo0 & R3K_ENTRYLO_N) ? 1 : 0, - (entrylo0 & R3K_ENTRYLO_D) ? 1 : 0, - (entrylo0 & R3K_ENTRYLO_V) ? 1 : 0, - (entrylo0 & R3K_ENTRYLO_G) ? 1 : 0); + pr_cont("va=%08lx asid=%08lx" + " [pa=%06lx n=%d d=%d v=%d g=%d]", + entryhi & PAGE_MASK, + entryhi & asid_mask, + entrylo0 & PAGE_MASK, + (entrylo0 & R3K_ENTRYLO_N) ? 1 : 0, + (entrylo0 & R3K_ENTRYLO_D) ? 1 : 0, + (entrylo0 & R3K_ENTRYLO_V) ? 1 : 0, + (entrylo0 & R3K_ENTRYLO_G) ? 1 : 0); } } printk("\n"); -- cgit From c9e5603974573367c4d80964a845237a2297228c Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 28 Oct 2016 08:20:09 +0100 Subject: MIPS: ptrace: Also initialize the FP context on individual FCSR writes Complement commit ac9ad83bc318 ("MIPS: prevent FP context set via ptrace being discarded") and also initialize the FP context whenever FCSR alone is written with a PTRACE_POKEUSR request addressing FPC_CSR, rather than along with the full FPU register set in the case of the PTRACE_SETFPREGS request. Signed-off-by: Maciej W. Rozycki Cc: Paul Burton Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14459/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/ptrace.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 6103b24d1bfc..fd3a9580661a 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -817,6 +817,7 @@ long arch_ptrace(struct task_struct *child, long request, break; #endif case FPC_CSR: + init_fp_ctx(child); ptrace_setfcr31(child, data); break; case DSP_BASE ... DSP_BASE + 5: { -- cgit From 5a1aca4469fdccd5b74ba0b4e490173b2b447895 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 28 Oct 2016 08:21:03 +0100 Subject: MIPS: Fix FCSR Cause bit handling for correct SIGFPE issue Sanitize FCSR Cause bit handling, following a trail of past attempts: * commit 4249548454f7 ("MIPS: ptrace: Fix FP context restoration FCSR regression"), * commit 443c44032a54 ("MIPS: Always clear FCSR cause bits after emulation"), * commit 64bedffe4968 ("MIPS: Clear [MSA]FPE CSR.Cause after notify_die()"), * commit b1442d39fac2 ("MIPS: Prevent user from setting FCSR cause bits"), * commit b54d2901517d ("Properly handle branch delay slots in connection with signals."). Specifically do not mask these bits out in ptrace(2) processing and send a SIGFPE signal instead whenever a matching pair of an FCSR Cause and Enable bit is seen as execution of an affected context is about to resume. Only then clear Cause bits, and even then do not clear any bits that are set but masked with the respective Enable bits. Adjust Cause bit clearing throughout code likewise, except within the FPU emulator proper where they are set according to IEEE 754 exceptions raised as the operation emulated executed. Do so so that any IEEE 754 exceptions subject to their default handling are recorded like with operations executed by FPU hardware. Signed-off-by: Maciej W. Rozycki Cc: Paul Burton Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14460/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/fpu_emulator.h | 13 +++++++ arch/mips/include/asm/switch_to.h | 18 +++++++++ arch/mips/kernel/mips-r2-to-r6-emul.c | 10 ++--- arch/mips/kernel/ptrace.c | 7 ++-- arch/mips/kernel/traps.c | 72 +++++++++++++++++++---------------- 5 files changed, 78 insertions(+), 42 deletions(-) diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h index 355dc25172e7..c05369e0b8d6 100644 --- a/arch/mips/include/asm/fpu_emulator.h +++ b/arch/mips/include/asm/fpu_emulator.h @@ -63,6 +63,8 @@ do { \ extern int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, int has_fpu, void *__user *fault_addr); +void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr, + struct task_struct *tsk); int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31); int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, @@ -81,4 +83,15 @@ static inline void fpu_emulator_init_fpu(void) set_fpr64(&t->thread.fpu.fpr[i], 0, SIGNALLING_NAN); } +/* + * Mask the FCSR Cause bits according to the Enable bits, observing + * that Unimplemented is always enabled. + */ +static inline unsigned long mask_fcr31_x(unsigned long fcr31) +{ + return fcr31 & (FPU_CSR_UNI_X | + ((fcr31 & FPU_CSR_ALL_E) << + (ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E)))); +} + #endif /* _ASM_FPU_EMULATOR_H */ diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h index ebb5c0f2f90d..c0ae27971e31 100644 --- a/arch/mips/include/asm/switch_to.h +++ b/arch/mips/include/asm/switch_to.h @@ -75,6 +75,22 @@ do { if (cpu_has_rw_llb) { \ } \ } while (0) +/* + * Check FCSR for any unmasked exceptions pending set with `ptrace', + * clear them and send a signal. + */ +#define __sanitize_fcr31(next) \ +do { \ + unsigned long fcr31 = mask_fcr31_x(next->thread.fpu.fcr31); \ + void __user *pc; \ + \ + if (unlikely(fcr31)) { \ + pc = (void __user *)task_pt_regs(next)->cp0_epc; \ + next->thread.fpu.fcr31 &= ~fcr31; \ + force_fcr31_sig(fcr31, pc, next); \ + } \ +} while (0) + /* * For newly created kernel threads switch_to() will return to * ret_from_kernel_thread, newly created user threads to ret_from_fork. @@ -85,6 +101,8 @@ do { if (cpu_has_rw_llb) { \ do { \ __mips_mt_fpaff_switch_to(prev); \ lose_fpu_inatomic(1, prev); \ + if (tsk_used_math(next)) \ + __sanitize_fcr31(next); \ if (cpu_has_dsp) { \ __save_dsp(prev); \ __restore_dsp(next); \ diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c index 22dedd62818a..bd09853aecdf 100644 --- a/arch/mips/kernel/mips-r2-to-r6-emul.c +++ b/arch/mips/kernel/mips-r2-to-r6-emul.c @@ -899,7 +899,7 @@ static inline int mipsr2_find_op_func(struct pt_regs *regs, u32 inst, * mipsr2_decoder: Decode and emulate a MIPS R2 instruction * @regs: Process register set * @inst: Instruction to decode and emulate - * @fcr31: Floating Point Control and Status Register returned + * @fcr31: Floating Point Control and Status Register Cause bits returned */ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31) { @@ -1172,13 +1172,13 @@ fpu_emul: err = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 0, &fault_addr); - *fcr31 = current->thread.fpu.fcr31; /* - * We can't allow the emulated instruction to leave any of - * the cause bits set in $fcr31. + * We can't allow the emulated instruction to leave any + * enabled Cause bits set in $fcr31. */ - current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X; + *fcr31 = res = mask_fcr31_x(current->thread.fpu.fcr31); + current->thread.fpu.fcr31 &= ~res; /* * this is a tricky issue - lose_fpu() uses LL/SC atomics diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index fd3a9580661a..a92994d60e91 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -79,16 +79,15 @@ void ptrace_disable(struct task_struct *child) } /* - * Poke at FCSR according to its mask. Don't set the cause bits as - * this is currently not handled correctly in FP context restoration - * and will cause an oops if a corresponding enable bit is set. + * Poke at FCSR according to its mask. Set the Cause bits even + * if a corresponding Enable bit is set. This will be noticed at + * the time the thread is switched to and SIGFPE thrown accordingly. */ static void ptrace_setfcr31(struct task_struct *child, u32 value) { u32 fcr31; u32 mask; - value &= ~FPU_CSR_ALL_X; fcr31 = child->thread.fpu.fcr31; mask = boot_cpu_data.fpu_msk31; child->thread.fpu.fcr31 = (value & ~mask) | (fcr31 & mask); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index b9a910b208f9..3905003dfe2b 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -708,6 +708,32 @@ asmlinkage void do_ov(struct pt_regs *regs) exception_exit(prev_state); } +/* + * Send SIGFPE according to FCSR Cause bits, which must have already + * been masked against Enable bits. This is impotant as Inexact can + * happen together with Overflow or Underflow, and `ptrace' can set + * any bits. + */ +void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr, + struct task_struct *tsk) +{ + struct siginfo si = { .si_addr = fault_addr, .si_signo = SIGFPE }; + + if (fcr31 & FPU_CSR_INV_X) + si.si_code = FPE_FLTINV; + else if (fcr31 & FPU_CSR_DIV_X) + si.si_code = FPE_FLTDIV; + else if (fcr31 & FPU_CSR_OVF_X) + si.si_code = FPE_FLTOVF; + else if (fcr31 & FPU_CSR_UDF_X) + si.si_code = FPE_FLTUND; + else if (fcr31 & FPU_CSR_INE_X) + si.si_code = FPE_FLTRES; + else + si.si_code = __SI_FAULT; + force_sig_info(SIGFPE, &si, tsk); +} + int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31) { struct siginfo si = { 0 }; @@ -718,27 +744,7 @@ int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31) return 0; case SIGFPE: - si.si_addr = fault_addr; - si.si_signo = sig; - /* - * Inexact can happen together with Overflow or Underflow. - * Respect the mask to deliver the correct exception. - */ - fcr31 &= (fcr31 & FPU_CSR_ALL_E) << - (ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E)); - if (fcr31 & FPU_CSR_INV_X) - si.si_code = FPE_FLTINV; - else if (fcr31 & FPU_CSR_DIV_X) - si.si_code = FPE_FLTDIV; - else if (fcr31 & FPU_CSR_OVF_X) - si.si_code = FPE_FLTOVF; - else if (fcr31 & FPU_CSR_UDF_X) - si.si_code = FPE_FLTUND; - else if (fcr31 & FPU_CSR_INE_X) - si.si_code = FPE_FLTRES; - else - si.si_code = __SI_FAULT; - force_sig_info(sig, &si, current); + force_fcr31_sig(fcr31, fault_addr, current); return 1; case SIGBUS: @@ -802,13 +808,13 @@ static int simulate_fp(struct pt_regs *regs, unsigned int opcode, /* Run the emulator */ sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1, &fault_addr); - fcr31 = current->thread.fpu.fcr31; /* - * We can't allow the emulated instruction to leave any of - * the cause bits set in $fcr31. + * We can't allow the emulated instruction to leave any + * enabled Cause bits set in $fcr31. */ - current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X; + fcr31 = mask_fcr31_x(current->thread.fpu.fcr31); + current->thread.fpu.fcr31 &= ~fcr31; /* Restore the hardware register state */ own_fpu(1); @@ -834,7 +840,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) goto out; /* Clear FCSR.Cause before enabling interrupts */ - write_32bit_cp1_register(CP1_STATUS, fcr31 & ~FPU_CSR_ALL_X); + write_32bit_cp1_register(CP1_STATUS, fcr31 & ~mask_fcr31_x(fcr31)); local_irq_enable(); die_if_kernel("FP exception in kernel code", regs); @@ -856,13 +862,13 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) /* Run the emulator */ sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1, &fault_addr); - fcr31 = current->thread.fpu.fcr31; /* - * We can't allow the emulated instruction to leave any of - * the cause bits set in $fcr31. + * We can't allow the emulated instruction to leave any + * enabled Cause bits set in $fcr31. */ - current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X; + fcr31 = mask_fcr31_x(current->thread.fpu.fcr31); + current->thread.fpu.fcr31 &= ~fcr31; /* Restore the hardware register state */ own_fpu(1); /* Using the FPU again. */ @@ -1427,13 +1433,13 @@ asmlinkage void do_cpu(struct pt_regs *regs) sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 0, &fault_addr); - fcr31 = current->thread.fpu.fcr31; /* * We can't allow the emulated instruction to leave - * any of the cause bits set in $fcr31. + * any enabled Cause bits set in $fcr31. */ - current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X; + fcr31 = mask_fcr31_x(current->thread.fpu.fcr31); + current->thread.fpu.fcr31 &= ~fcr31; /* Send a signal if required. */ if (!process_fpemu_return(sig, fault_addr, fcr31) && !err) -- cgit From 35938a00ba86ae7a7404b66b526968ca2b8d3127 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 31 Oct 2016 16:25:44 +0000 Subject: MIPS: Fix ISA I FP sigcontext access violation handling Complement commit 0ae8dceaebe3 ("Merge with 2.3.10.") and use the local `fault' handler to recover from FP sigcontext access violation faults, like corresponding code does in r4k_fpu.S. The `bad_stack' handler is in syscall.c and is not suitable here as we want to propagate the error condition up through the caller rather than killing the thread outright. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14474/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/r2300_fpu.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S index b4ac6374a38f..c4c8c1b65be9 100644 --- a/arch/mips/kernel/r2300_fpu.S +++ b/arch/mips/kernel/r2300_fpu.S @@ -21,7 +21,7 @@ #define EX(a,b) \ 9: a,##b; \ .section __ex_table,"a"; \ - PTR 9b,bad_stack; \ + PTR 9b,fault; \ .previous .set noreorder -- cgit From 6daaa3266db9cc488612690e42c23b0763e2b49a Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 31 Oct 2016 16:26:24 +0000 Subject: MIPS: Remove FIR from ISA I FP signal context Complement commit e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP ASE.") and remove the Floating Point Implementation Register (FIR) from the FP register set recorded in a signal context with MIPS I processors too, in line with the change applied to r4k_fpu.S. The `sc_fpc_eir' slot is unused according to our current ABI and the FIR register is read-only and always directly accessible from user software. [ralf@linux-mips.org: This is also required because the next commit depends on it.] Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14475/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/r2300_fpu.S | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S index c4c8c1b65be9..ce249eae91ce 100644 --- a/arch/mips/kernel/r2300_fpu.S +++ b/arch/mips/kernel/r2300_fpu.S @@ -64,13 +64,9 @@ LEAF(_save_fp_context) EX(swc1 $f29,(SC_FPREGS+232)(a0)) EX(swc1 $f30,(SC_FPREGS+240)(a0)) EX(swc1 $f31,(SC_FPREGS+248)(a0)) - EX(sw t1,(SC_FPC_CSR)(a0)) - cfc1 t0,$0 # implementation/version jr ra + EX(sw t1,(SC_FPC_CSR)(a0)) .set pop - .set nomacro - EX(sw t0,(SC_FPC_EIR)(a0)) - .set macro END(_save_fp_context) /* -- cgit From 758ef0a939d4c003381d2a97d9fb51b2d6d7e162 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 31 Oct 2016 16:27:01 +0000 Subject: MIPS: Fix ISA I/II FP signal context offsets Fix a regression introduced with commit 2db9ca0a3551 ("MIPS: Use struct mips_abi offsets to save FP context") for MIPS I/I FP signal contexts, by converting save/restore code to the updated internal API. Start FGR offsets from 0 rather than SC_FPREGS from $a0 and use $a1 rather than the offset of SC_FPC_CSR from $a0 for the Floating Point Control/Status Register (FCSR). Document the new internal API and adjust assembly code formatting for consistency. Signed-off-by: Maciej W. Rozycki Cc: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14476/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/r2300_fpu.S | 159 ++++++++++++++++++++++--------------------- arch/mips/kernel/r6000_fpu.S | 89 +++++++++++++----------- 2 files changed, 131 insertions(+), 117 deletions(-) diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S index ce249eae91ce..70ca63752cfa 100644 --- a/arch/mips/kernel/r2300_fpu.S +++ b/arch/mips/kernel/r2300_fpu.S @@ -26,97 +26,104 @@ .set noreorder .set mips1 - /* Save floating point context */ + +/** + * _save_fp_context() - save FP context from the FPU + * @a0 - pointer to fpregs field of sigcontext + * @a1 - pointer to fpc_csr field of sigcontext + * + * Save FP context, including the 32 FP data registers and the FP + * control & status register, from the FPU to signal context. + */ LEAF(_save_fp_context) .set push SET_HARDFLOAT li v0, 0 # assume success - cfc1 t1,fcr31 - EX(swc1 $f0,(SC_FPREGS+0)(a0)) - EX(swc1 $f1,(SC_FPREGS+8)(a0)) - EX(swc1 $f2,(SC_FPREGS+16)(a0)) - EX(swc1 $f3,(SC_FPREGS+24)(a0)) - EX(swc1 $f4,(SC_FPREGS+32)(a0)) - EX(swc1 $f5,(SC_FPREGS+40)(a0)) - EX(swc1 $f6,(SC_FPREGS+48)(a0)) - EX(swc1 $f7,(SC_FPREGS+56)(a0)) - EX(swc1 $f8,(SC_FPREGS+64)(a0)) - EX(swc1 $f9,(SC_FPREGS+72)(a0)) - EX(swc1 $f10,(SC_FPREGS+80)(a0)) - EX(swc1 $f11,(SC_FPREGS+88)(a0)) - EX(swc1 $f12,(SC_FPREGS+96)(a0)) - EX(swc1 $f13,(SC_FPREGS+104)(a0)) - EX(swc1 $f14,(SC_FPREGS+112)(a0)) - EX(swc1 $f15,(SC_FPREGS+120)(a0)) - EX(swc1 $f16,(SC_FPREGS+128)(a0)) - EX(swc1 $f17,(SC_FPREGS+136)(a0)) - EX(swc1 $f18,(SC_FPREGS+144)(a0)) - EX(swc1 $f19,(SC_FPREGS+152)(a0)) - EX(swc1 $f20,(SC_FPREGS+160)(a0)) - EX(swc1 $f21,(SC_FPREGS+168)(a0)) - EX(swc1 $f22,(SC_FPREGS+176)(a0)) - EX(swc1 $f23,(SC_FPREGS+184)(a0)) - EX(swc1 $f24,(SC_FPREGS+192)(a0)) - EX(swc1 $f25,(SC_FPREGS+200)(a0)) - EX(swc1 $f26,(SC_FPREGS+208)(a0)) - EX(swc1 $f27,(SC_FPREGS+216)(a0)) - EX(swc1 $f28,(SC_FPREGS+224)(a0)) - EX(swc1 $f29,(SC_FPREGS+232)(a0)) - EX(swc1 $f30,(SC_FPREGS+240)(a0)) - EX(swc1 $f31,(SC_FPREGS+248)(a0)) + cfc1 t1, fcr31 + EX(swc1 $f0, 0(a0)) + EX(swc1 $f1, 8(a0)) + EX(swc1 $f2, 16(a0)) + EX(swc1 $f3, 24(a0)) + EX(swc1 $f4, 32(a0)) + EX(swc1 $f5, 40(a0)) + EX(swc1 $f6, 48(a0)) + EX(swc1 $f7, 56(a0)) + EX(swc1 $f8, 64(a0)) + EX(swc1 $f9, 72(a0)) + EX(swc1 $f10, 80(a0)) + EX(swc1 $f11, 88(a0)) + EX(swc1 $f12, 96(a0)) + EX(swc1 $f13, 104(a0)) + EX(swc1 $f14, 112(a0)) + EX(swc1 $f15, 120(a0)) + EX(swc1 $f16, 128(a0)) + EX(swc1 $f17, 136(a0)) + EX(swc1 $f18, 144(a0)) + EX(swc1 $f19, 152(a0)) + EX(swc1 $f20, 160(a0)) + EX(swc1 $f21, 168(a0)) + EX(swc1 $f22, 176(a0)) + EX(swc1 $f23, 184(a0)) + EX(swc1 $f24, 192(a0)) + EX(swc1 $f25, 200(a0)) + EX(swc1 $f26, 208(a0)) + EX(swc1 $f27, 216(a0)) + EX(swc1 $f28, 224(a0)) + EX(swc1 $f29, 232(a0)) + EX(swc1 $f30, 240(a0)) + EX(swc1 $f31, 248(a0)) jr ra - EX(sw t1,(SC_FPC_CSR)(a0)) + EX(sw t1, (a1)) .set pop END(_save_fp_context) -/* - * Restore FPU state: - * - fp gp registers - * - cp1 status/control register +/** + * _restore_fp_context() - restore FP context to the FPU + * @a0 - pointer to fpregs field of sigcontext + * @a1 - pointer to fpc_csr field of sigcontext * - * We base the decision which registers to restore from the signal stack - * frame on the current content of c0_status, not on the content of the - * stack frame which might have been changed by the user. + * Restore FP context, including the 32 FP data registers and the FP + * control & status register, from signal context to the FPU. */ LEAF(_restore_fp_context) .set push SET_HARDFLOAT li v0, 0 # assume success - EX(lw t0,(SC_FPC_CSR)(a0)) - EX(lwc1 $f0,(SC_FPREGS+0)(a0)) - EX(lwc1 $f1,(SC_FPREGS+8)(a0)) - EX(lwc1 $f2,(SC_FPREGS+16)(a0)) - EX(lwc1 $f3,(SC_FPREGS+24)(a0)) - EX(lwc1 $f4,(SC_FPREGS+32)(a0)) - EX(lwc1 $f5,(SC_FPREGS+40)(a0)) - EX(lwc1 $f6,(SC_FPREGS+48)(a0)) - EX(lwc1 $f7,(SC_FPREGS+56)(a0)) - EX(lwc1 $f8,(SC_FPREGS+64)(a0)) - EX(lwc1 $f9,(SC_FPREGS+72)(a0)) - EX(lwc1 $f10,(SC_FPREGS+80)(a0)) - EX(lwc1 $f11,(SC_FPREGS+88)(a0)) - EX(lwc1 $f12,(SC_FPREGS+96)(a0)) - EX(lwc1 $f13,(SC_FPREGS+104)(a0)) - EX(lwc1 $f14,(SC_FPREGS+112)(a0)) - EX(lwc1 $f15,(SC_FPREGS+120)(a0)) - EX(lwc1 $f16,(SC_FPREGS+128)(a0)) - EX(lwc1 $f17,(SC_FPREGS+136)(a0)) - EX(lwc1 $f18,(SC_FPREGS+144)(a0)) - EX(lwc1 $f19,(SC_FPREGS+152)(a0)) - EX(lwc1 $f20,(SC_FPREGS+160)(a0)) - EX(lwc1 $f21,(SC_FPREGS+168)(a0)) - EX(lwc1 $f22,(SC_FPREGS+176)(a0)) - EX(lwc1 $f23,(SC_FPREGS+184)(a0)) - EX(lwc1 $f24,(SC_FPREGS+192)(a0)) - EX(lwc1 $f25,(SC_FPREGS+200)(a0)) - EX(lwc1 $f26,(SC_FPREGS+208)(a0)) - EX(lwc1 $f27,(SC_FPREGS+216)(a0)) - EX(lwc1 $f28,(SC_FPREGS+224)(a0)) - EX(lwc1 $f29,(SC_FPREGS+232)(a0)) - EX(lwc1 $f30,(SC_FPREGS+240)(a0)) - EX(lwc1 $f31,(SC_FPREGS+248)(a0)) + EX(lw t0, (a1)) + EX(lwc1 $f0, 0(a0)) + EX(lwc1 $f1, 8(a0)) + EX(lwc1 $f2, 16(a0)) + EX(lwc1 $f3, 24(a0)) + EX(lwc1 $f4, 32(a0)) + EX(lwc1 $f5, 40(a0)) + EX(lwc1 $f6, 48(a0)) + EX(lwc1 $f7, 56(a0)) + EX(lwc1 $f8, 64(a0)) + EX(lwc1 $f9, 72(a0)) + EX(lwc1 $f10, 80(a0)) + EX(lwc1 $f11, 88(a0)) + EX(lwc1 $f12, 96(a0)) + EX(lwc1 $f13, 104(a0)) + EX(lwc1 $f14, 112(a0)) + EX(lwc1 $f15, 120(a0)) + EX(lwc1 $f16, 128(a0)) + EX(lwc1 $f17, 136(a0)) + EX(lwc1 $f18, 144(a0)) + EX(lwc1 $f19, 152(a0)) + EX(lwc1 $f20, 160(a0)) + EX(lwc1 $f21, 168(a0)) + EX(lwc1 $f22, 176(a0)) + EX(lwc1 $f23, 184(a0)) + EX(lwc1 $f24, 192(a0)) + EX(lwc1 $f25, 200(a0)) + EX(lwc1 $f26, 208(a0)) + EX(lwc1 $f27, 216(a0)) + EX(lwc1 $f28, 224(a0)) + EX(lwc1 $f29, 232(a0)) + EX(lwc1 $f30, 240(a0)) + EX(lwc1 $f31, 248(a0)) jr ra - ctc1 t0,fcr31 + ctc1 t0, fcr31 .set pop END(_restore_fp_context) .set reorder diff --git a/arch/mips/kernel/r6000_fpu.S b/arch/mips/kernel/r6000_fpu.S index 47077380c15c..9cc7bfab3419 100644 --- a/arch/mips/kernel/r6000_fpu.S +++ b/arch/mips/kernel/r6000_fpu.S @@ -21,7 +21,14 @@ .set push SET_HARDFLOAT - /* Save floating point context */ +/** + * _save_fp_context() - save FP context from the FPU + * @a0 - pointer to fpregs field of sigcontext + * @a1 - pointer to fpc_csr field of sigcontext + * + * Save FP context, including the 32 FP data registers and the FP + * control & status register, from the FPU to signal context. + */ LEAF(_save_fp_context) mfc0 t0,CP0_STATUS sll t0,t0,2 @@ -30,59 +37,59 @@ cfc1 t1,fcr31 /* Store the 16 double precision registers */ - sdc1 $f0,(SC_FPREGS+0)(a0) - sdc1 $f2,(SC_FPREGS+16)(a0) - sdc1 $f4,(SC_FPREGS+32)(a0) - sdc1 $f6,(SC_FPREGS+48)(a0) - sdc1 $f8,(SC_FPREGS+64)(a0) - sdc1 $f10,(SC_FPREGS+80)(a0) - sdc1 $f12,(SC_FPREGS+96)(a0) - sdc1 $f14,(SC_FPREGS+112)(a0) - sdc1 $f16,(SC_FPREGS+128)(a0) - sdc1 $f18,(SC_FPREGS+144)(a0) - sdc1 $f20,(SC_FPREGS+160)(a0) - sdc1 $f22,(SC_FPREGS+176)(a0) - sdc1 $f24,(SC_FPREGS+192)(a0) - sdc1 $f26,(SC_FPREGS+208)(a0) - sdc1 $f28,(SC_FPREGS+224)(a0) - sdc1 $f30,(SC_FPREGS+240)(a0) + sdc1 $f0,0(a0) + sdc1 $f2,16(a0) + sdc1 $f4,32(a0) + sdc1 $f6,48(a0) + sdc1 $f8,64(a0) + sdc1 $f10,80(a0) + sdc1 $f12,96(a0) + sdc1 $f14,112(a0) + sdc1 $f16,128(a0) + sdc1 $f18,144(a0) + sdc1 $f20,160(a0) + sdc1 $f22,176(a0) + sdc1 $f24,192(a0) + sdc1 $f26,208(a0) + sdc1 $f28,224(a0) + sdc1 $f30,240(a0) jr ra - sw t0,SC_FPC_CSR(a0) + sw t0,(a1) 1: jr ra nop END(_save_fp_context) -/* Restore FPU state: - * - fp gp registers - * - cp1 status/control register +/** + * _restore_fp_context() - restore FP context to the FPU + * @a0 - pointer to fpregs field of sigcontext + * @a1 - pointer to fpc_csr field of sigcontext * - * We base the decision which registers to restore from the signal stack - * frame on the current content of c0_status, not on the content of the - * stack frame which might have been changed by the user. + * Restore FP context, including the 32 FP data registers and the FP + * control & status register, from signal context to the FPU. */ LEAF(_restore_fp_context) mfc0 t0,CP0_STATUS sll t0,t0,2 bgez t0,1f - lw t0,SC_FPC_CSR(a0) + lw t0,(a1) /* Restore the 16 double precision registers */ - ldc1 $f0,(SC_FPREGS+0)(a0) - ldc1 $f2,(SC_FPREGS+16)(a0) - ldc1 $f4,(SC_FPREGS+32)(a0) - ldc1 $f6,(SC_FPREGS+48)(a0) - ldc1 $f8,(SC_FPREGS+64)(a0) - ldc1 $f10,(SC_FPREGS+80)(a0) - ldc1 $f12,(SC_FPREGS+96)(a0) - ldc1 $f14,(SC_FPREGS+112)(a0) - ldc1 $f16,(SC_FPREGS+128)(a0) - ldc1 $f18,(SC_FPREGS+144)(a0) - ldc1 $f20,(SC_FPREGS+160)(a0) - ldc1 $f22,(SC_FPREGS+176)(a0) - ldc1 $f24,(SC_FPREGS+192)(a0) - ldc1 $f26,(SC_FPREGS+208)(a0) - ldc1 $f28,(SC_FPREGS+224)(a0) - ldc1 $f30,(SC_FPREGS+240)(a0) + ldc1 $f0,0(a0) + ldc1 $f2,16(a0) + ldc1 $f4,32(a0) + ldc1 $f6,48(a0) + ldc1 $f8,64(a0) + ldc1 $f10,80(a0) + ldc1 $f12,96(a0) + ldc1 $f14,112(a0) + ldc1 $f16,128(a0) + ldc1 $f18,144(a0) + ldc1 $f20,160(a0) + ldc1 $f22,176(a0) + ldc1 $f24,192(a0) + ldc1 $f26,208(a0) + ldc1 $f28,224(a0) + ldc1 $f30,240(a0) jr ra ctc1 t0,fcr31 1: jr ra -- cgit From f92722dc4545ebfa0f99a2f986fd88c112a22a42 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 31 Oct 2016 16:27:40 +0000 Subject: MIPS: Correct MIPS I FP sigcontext layout Complement commit 80cbfad79096 ("MIPS: Correct MIPS I FP context layout") and correct the way Floating Point General registers are stored in a signal context with MIPS I hardware. Use the S.D and L.D assembly macros to have pairs of SWC1 instructions and pairs of LWC1 instructions produced, respectively, in an arrangement which makes the memory representation of floating-point data passed compatible with that used by hardware SDC1 and LDC1 instructions, where available, regardless of the hardware endianness used. This matches the layout used by r4k_fpu.S, ensuring run-time compatibility for MIPS I software across all o32 hardware platforms. Define an EX2 macro to handle exceptions from both hardware instructions implicitly produced from S.D and L.D assembly macros. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14477/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/r2300_fpu.S | 103 ++++++++++++++++--------------------------- 1 file changed, 39 insertions(+), 64 deletions(-) diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S index 70ca63752cfa..918f2f6d3861 100644 --- a/arch/mips/kernel/r2300_fpu.S +++ b/arch/mips/kernel/r2300_fpu.S @@ -24,6 +24,13 @@ PTR 9b,fault; \ .previous +#define EX2(a,b) \ +9: a,##b; \ + .section __ex_table,"a"; \ + PTR 9b,bad_stack; \ + PTR 9b+4,bad_stack; \ + .previous + .set noreorder .set mips1 @@ -40,38 +47,22 @@ LEAF(_save_fp_context) SET_HARDFLOAT li v0, 0 # assume success cfc1 t1, fcr31 - EX(swc1 $f0, 0(a0)) - EX(swc1 $f1, 8(a0)) - EX(swc1 $f2, 16(a0)) - EX(swc1 $f3, 24(a0)) - EX(swc1 $f4, 32(a0)) - EX(swc1 $f5, 40(a0)) - EX(swc1 $f6, 48(a0)) - EX(swc1 $f7, 56(a0)) - EX(swc1 $f8, 64(a0)) - EX(swc1 $f9, 72(a0)) - EX(swc1 $f10, 80(a0)) - EX(swc1 $f11, 88(a0)) - EX(swc1 $f12, 96(a0)) - EX(swc1 $f13, 104(a0)) - EX(swc1 $f14, 112(a0)) - EX(swc1 $f15, 120(a0)) - EX(swc1 $f16, 128(a0)) - EX(swc1 $f17, 136(a0)) - EX(swc1 $f18, 144(a0)) - EX(swc1 $f19, 152(a0)) - EX(swc1 $f20, 160(a0)) - EX(swc1 $f21, 168(a0)) - EX(swc1 $f22, 176(a0)) - EX(swc1 $f23, 184(a0)) - EX(swc1 $f24, 192(a0)) - EX(swc1 $f25, 200(a0)) - EX(swc1 $f26, 208(a0)) - EX(swc1 $f27, 216(a0)) - EX(swc1 $f28, 224(a0)) - EX(swc1 $f29, 232(a0)) - EX(swc1 $f30, 240(a0)) - EX(swc1 $f31, 248(a0)) + EX2(s.d $f0, 0(a0)) + EX2(s.d $f2, 16(a0)) + EX2(s.d $f4, 32(a0)) + EX2(s.d $f6, 48(a0)) + EX2(s.d $f8, 64(a0)) + EX2(s.d $f10, 80(a0)) + EX2(s.d $f12, 96(a0)) + EX2(s.d $f14, 112(a0)) + EX2(s.d $f16, 128(a0)) + EX2(s.d $f18, 144(a0)) + EX2(s.d $f20, 160(a0)) + EX2(s.d $f22, 176(a0)) + EX2(s.d $f24, 192(a0)) + EX2(s.d $f26, 208(a0)) + EX2(s.d $f28, 224(a0)) + EX2(s.d $f30, 240(a0)) jr ra EX(sw t1, (a1)) .set pop @@ -90,38 +81,22 @@ LEAF(_restore_fp_context) SET_HARDFLOAT li v0, 0 # assume success EX(lw t0, (a1)) - EX(lwc1 $f0, 0(a0)) - EX(lwc1 $f1, 8(a0)) - EX(lwc1 $f2, 16(a0)) - EX(lwc1 $f3, 24(a0)) - EX(lwc1 $f4, 32(a0)) - EX(lwc1 $f5, 40(a0)) - EX(lwc1 $f6, 48(a0)) - EX(lwc1 $f7, 56(a0)) - EX(lwc1 $f8, 64(a0)) - EX(lwc1 $f9, 72(a0)) - EX(lwc1 $f10, 80(a0)) - EX(lwc1 $f11, 88(a0)) - EX(lwc1 $f12, 96(a0)) - EX(lwc1 $f13, 104(a0)) - EX(lwc1 $f14, 112(a0)) - EX(lwc1 $f15, 120(a0)) - EX(lwc1 $f16, 128(a0)) - EX(lwc1 $f17, 136(a0)) - EX(lwc1 $f18, 144(a0)) - EX(lwc1 $f19, 152(a0)) - EX(lwc1 $f20, 160(a0)) - EX(lwc1 $f21, 168(a0)) - EX(lwc1 $f22, 176(a0)) - EX(lwc1 $f23, 184(a0)) - EX(lwc1 $f24, 192(a0)) - EX(lwc1 $f25, 200(a0)) - EX(lwc1 $f26, 208(a0)) - EX(lwc1 $f27, 216(a0)) - EX(lwc1 $f28, 224(a0)) - EX(lwc1 $f29, 232(a0)) - EX(lwc1 $f30, 240(a0)) - EX(lwc1 $f31, 248(a0)) + EX2(l.d $f0, 0(a0)) + EX2(l.d $f2, 16(a0)) + EX2(l.d $f4, 32(a0)) + EX2(l.d $f6, 48(a0)) + EX2(l.d $f8, 64(a0)) + EX2(l.d $f10, 80(a0)) + EX2(l.d $f12, 96(a0)) + EX2(l.d $f14, 112(a0)) + EX2(l.d $f16, 128(a0)) + EX2(l.d $f18, 144(a0)) + EX2(l.d $f20, 160(a0)) + EX2(l.d $f22, 176(a0)) + EX2(l.d $f24, 192(a0)) + EX2(l.d $f26, 208(a0)) + EX2(l.d $f28, 224(a0)) + EX2(l.d $f30, 240(a0)) jr ra ctc1 t0, fcr31 .set pop -- cgit From 16a767ec63167ef70c056795782d6c9c76ba5a5c Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 1 Nov 2016 13:59:09 +0000 Subject: MIPS: Fix max_low_pfn with disabled highmem When low memory doesn't reach HIGHMEM_START (e.g. up to 256MB at PA=0 is common) and highmem is present above HIGHMEM_START (e.g. on Malta the RAM overlayed by the IO region is aliased at PA=0x90000000), max_low_pfn will be initially calculated very large and then clipped down to HIGHMEM_START. This causes crashes when reading /sys/kernel/mm/page_idle/bitmap (i.e. CONFIG_IDLE_PAGE_TRACKING=y) when highmem is disabled. pfn_valid() will compare against max_mapnr which is derived from max_low_pfn when there is no highend_pfn set up, and will return true for PFNs right up to HIGHMEM_START, even though they are beyond the end of low memory and no page structs will actually exist for these PFNs. This is fixed by skipping high memory regions when initially calculating max_low_pfn if highmem is disabled, so it doesn't get clipped too high. We also clip regions which overlap the highmem boundary when highmem is disabled, so that max_pfn doesn't extend into highmem either. Signed-off-by: James Hogan Cc: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14490/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/setup.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 0d57909d9026..f66e5ce505b2 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -368,6 +368,19 @@ static void __init bootmem_init(void) end = PFN_DOWN(boot_mem_map.map[i].addr + boot_mem_map.map[i].size); +#ifndef CONFIG_HIGHMEM + /* + * Skip highmem here so we get an accurate max_low_pfn if low + * memory stops short of high memory. + * If the region overlaps HIGHMEM_START, end is clipped so + * max_pfn excludes the highmem portion. + */ + if (start >= PFN_DOWN(HIGHMEM_START)) + continue; + if (end > PFN_DOWN(HIGHMEM_START)) + end = PFN_DOWN(HIGHMEM_START); +#endif + if (end > max_low_pfn) max_low_pfn = end; if (start < min_low_pfn) -- cgit From 16976085a114ae293c6fa7a463d74600ffcfeb4b Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Thu, 3 Nov 2016 17:36:18 +0530 Subject: drm/msm: Fix error handling crashes seen when VRAM allocation fails If VRAM allocation fails, the error handling path crashes in msm_drm_uninit(). The following changes are made to fix this: msm_gem_shrinker_cleanup() is fixed to unregister the shrinker only if it was init-ed in the first place. Before calling kms->funcs->destroy(), we check if kms->funcs is also non-NULL. This is needed for MDP5, since during msm_drm_int(), priv->kms becomes non-NULL early, but msm_kms_init() is called on it only later in mdp5_kms_init(). Signed-off-by: Archit Taneja Signed-off-by: Rob Clark Reviewed-by: Andy Gross --- drivers/gpu/drm/msm/msm_drv.c | 2 +- drivers/gpu/drm/msm/msm_gem_shrinker.c | 7 +++++-- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index fb5c0b0a7594..46568fc80848 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -228,7 +228,7 @@ static int msm_drm_uninit(struct device *dev) flush_workqueue(priv->atomic_wq); destroy_workqueue(priv->atomic_wq); - if (kms) + if (kms && kms->funcs) kms->funcs->destroy(kms); if (gpu) { diff --git a/drivers/gpu/drm/msm/msm_gem_shrinker.c b/drivers/gpu/drm/msm/msm_gem_shrinker.c index 283d2841ba58..192b2d3a79cb 100644 --- a/drivers/gpu/drm/msm/msm_gem_shrinker.c +++ b/drivers/gpu/drm/msm/msm_gem_shrinker.c @@ -163,6 +163,9 @@ void msm_gem_shrinker_init(struct drm_device *dev) void msm_gem_shrinker_cleanup(struct drm_device *dev) { struct msm_drm_private *priv = dev->dev_private; - WARN_ON(unregister_vmap_purge_notifier(&priv->vmap_notifier)); - unregister_shrinker(&priv->shrinker); + + if (priv->shrinker.nr_deferred) { + WARN_ON(unregister_vmap_purge_notifier(&priv->vmap_notifier)); + unregister_shrinker(&priv->shrinker); + } } -- cgit From 94d0e5980d6791b9f98a9b6c586c1f7cb76b2178 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 18 Oct 2016 18:37:49 +0100 Subject: arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU Architecturally, TLBs are private to the (physical) CPU they're associated with. But when multiple vcpus from the same VM are being multiplexed on the same CPU, the TLBs are not private to the vcpus (and are actually shared across the VMID). Let's consider the following scenario: - vcpu-0 maps PA to VA - vcpu-1 maps PA' to VA If run on the same physical CPU, vcpu-1 can hit TLB entries generated by vcpu-0 accesses, and access the wrong physical page. The solution to this is to keep a per-VM map of which vcpu ran last on each given physical CPU, and invalidate local TLBs when switching to a different vcpu from the same VM. Reviewed-by: Christoffer Dall Signed-off-by: Marc Zyngier --- arch/arm/include/asm/kvm_asm.h | 1 + arch/arm/include/asm/kvm_host.h | 3 +++ arch/arm/include/asm/kvm_hyp.h | 1 + arch/arm/kvm/arm.c | 27 ++++++++++++++++++++++++++- arch/arm/kvm/hyp/tlb.c | 15 +++++++++++++++ arch/arm64/include/asm/kvm_asm.h | 1 + arch/arm64/include/asm/kvm_host.h | 3 +++ arch/arm64/include/asm/kvm_mmu.h | 2 +- arch/arm64/kvm/hyp/tlb.c | 15 +++++++++++++++ 9 files changed, 66 insertions(+), 2 deletions(-) diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index d7ea6bcb29bf..8ef05381984b 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -66,6 +66,7 @@ extern char __kvm_hyp_vector[]; extern void __kvm_flush_vm_context(void); extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern void __kvm_tlb_flush_vmid(struct kvm *kvm); +extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 2d19e02d03fd..d5423ab15ed5 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -57,6 +57,9 @@ struct kvm_arch { /* VTTBR value associated with below pgd and vmid */ u64 vttbr; + /* The last vcpu id that ran on each physical CPU */ + int __percpu *last_vcpu_ran; + /* Timer */ struct arch_timer_kvm timer; diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h index 343135ede5fa..58508900c4bb 100644 --- a/arch/arm/include/asm/kvm_hyp.h +++ b/arch/arm/include/asm/kvm_hyp.h @@ -71,6 +71,7 @@ #define ICIALLUIS __ACCESS_CP15(c7, 0, c1, 0) #define ATS1CPR __ACCESS_CP15(c7, 0, c8, 0) #define TLBIALLIS __ACCESS_CP15(c8, 0, c3, 0) +#define TLBIALL __ACCESS_CP15(c8, 0, c7, 0) #define TLBIALLNSNHIS __ACCESS_CP15(c8, 4, c3, 4) #define PRRR __ACCESS_CP15(c10, 0, c2, 0) #define NMRR __ACCESS_CP15(c10, 0, c2, 1) diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 08bb84f2ad58..19b5f5c1c0ff 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -114,11 +114,18 @@ void kvm_arch_check_processor_compat(void *rtn) */ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) { - int ret = 0; + int ret, cpu; if (type) return -EINVAL; + kvm->arch.last_vcpu_ran = alloc_percpu(typeof(*kvm->arch.last_vcpu_ran)); + if (!kvm->arch.last_vcpu_ran) + return -ENOMEM; + + for_each_possible_cpu(cpu) + *per_cpu_ptr(kvm->arch.last_vcpu_ran, cpu) = -1; + ret = kvm_alloc_stage2_pgd(kvm); if (ret) goto out_fail_alloc; @@ -141,6 +148,8 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) out_free_stage2_pgd: kvm_free_stage2_pgd(kvm); out_fail_alloc: + free_percpu(kvm->arch.last_vcpu_ran); + kvm->arch.last_vcpu_ran = NULL; return ret; } @@ -168,6 +177,9 @@ void kvm_arch_destroy_vm(struct kvm *kvm) { int i; + free_percpu(kvm->arch.last_vcpu_ran); + kvm->arch.last_vcpu_ran = NULL; + for (i = 0; i < KVM_MAX_VCPUS; ++i) { if (kvm->vcpus[i]) { kvm_arch_vcpu_free(kvm->vcpus[i]); @@ -312,6 +324,19 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) { + int *last_ran; + + last_ran = this_cpu_ptr(vcpu->kvm->arch.last_vcpu_ran); + + /* + * We might get preempted before the vCPU actually runs, but + * over-invalidation doesn't affect correctness. + */ + if (*last_ran != vcpu->vcpu_id) { + kvm_call_hyp(__kvm_tlb_flush_local_vmid, vcpu); + *last_ran = vcpu->vcpu_id; + } + vcpu->cpu = cpu; vcpu->arch.host_cpu_context = this_cpu_ptr(kvm_host_cpu_state); diff --git a/arch/arm/kvm/hyp/tlb.c b/arch/arm/kvm/hyp/tlb.c index 729652854f90..6d810af2d9fd 100644 --- a/arch/arm/kvm/hyp/tlb.c +++ b/arch/arm/kvm/hyp/tlb.c @@ -55,6 +55,21 @@ void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) __kvm_tlb_flush_vmid(kvm); } +void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu) +{ + struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm); + + /* Switch to requested VMID */ + write_sysreg(kvm->arch.vttbr, VTTBR); + isb(); + + write_sysreg(0, TLBIALL); + dsb(nsh); + isb(); + + write_sysreg(0, VTTBR); +} + void __hyp_text __kvm_flush_vm_context(void) { write_sysreg(0, TLBIALLNSNHIS); diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h index 18f746551bf6..ec3553eb9349 100644 --- a/arch/arm64/include/asm/kvm_asm.h +++ b/arch/arm64/include/asm/kvm_asm.h @@ -54,6 +54,7 @@ extern char __kvm_hyp_vector[]; extern void __kvm_flush_vm_context(void); extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern void __kvm_tlb_flush_vmid(struct kvm *kvm); +extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index bd94e6766759..e5050388e062 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -62,6 +62,9 @@ struct kvm_arch { /* VTTBR value associated with above pgd and vmid */ u64 vttbr; + /* The last vcpu id that ran on each physical CPU */ + int __percpu *last_vcpu_ran; + /* The maximum number of vCPUs depends on the used GIC model */ int max_vcpus; diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h index a79b969c26fc..6f72fe8b0e3e 100644 --- a/arch/arm64/include/asm/kvm_mmu.h +++ b/arch/arm64/include/asm/kvm_mmu.h @@ -128,7 +128,7 @@ static inline unsigned long __kern_hyp_va(unsigned long v) return v; } -#define kern_hyp_va(v) (typeof(v))(__kern_hyp_va((unsigned long)(v))) +#define kern_hyp_va(v) ((typeof(v))(__kern_hyp_va((unsigned long)(v)))) /* * We currently only support a 40bit IPA. diff --git a/arch/arm64/kvm/hyp/tlb.c b/arch/arm64/kvm/hyp/tlb.c index 9cc0ea784ae6..88e2f2b938f0 100644 --- a/arch/arm64/kvm/hyp/tlb.c +++ b/arch/arm64/kvm/hyp/tlb.c @@ -64,6 +64,21 @@ void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm) write_sysreg(0, vttbr_el2); } +void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu) +{ + struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm); + + /* Switch to requested VMID */ + write_sysreg(kvm->arch.vttbr, vttbr_el2); + isb(); + + asm volatile("tlbi vmalle1" : : ); + dsb(nsh); + isb(); + + write_sysreg(0, vttbr_el2); +} + void __hyp_text __kvm_flush_vm_context(void) { dsb(ishst); -- cgit From 112b0b8f8f6e18d4695d21457961c0e1b322a1d7 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Tue, 1 Nov 2016 18:00:08 +0000 Subject: KVM: arm/arm64: vgic: Prevent access to invalid SPIs In our VGIC implementation we limit the number of SPIs to a number that the userland application told us. Accordingly we limit the allocation of memory for virtual IRQs to that number. However in our MMIO dispatcher we didn't check if we ever access an IRQ beyond that limit, leading to out-of-bound accesses. Add a test against the number of allocated SPIs in check_region(). Adjust the VGIC_ADDR_TO_INT macro to avoid an actual division, which is not implemented on ARM(32). [maz: cleaned-up original patch] Cc: stable@vger.kernel.org Reviewed-by: Christoffer Dall Signed-off-by: Andre Przywara Signed-off-by: Marc Zyngier --- virt/kvm/arm/vgic/vgic-mmio.c | 41 +++++++++++++++++++++++++++-------------- virt/kvm/arm/vgic/vgic-mmio.h | 14 +++++++------- 2 files changed, 34 insertions(+), 21 deletions(-) diff --git a/virt/kvm/arm/vgic/vgic-mmio.c b/virt/kvm/arm/vgic/vgic-mmio.c index e18b30ddcdce..ebe1b9fa3c4d 100644 --- a/virt/kvm/arm/vgic/vgic-mmio.c +++ b/virt/kvm/arm/vgic/vgic-mmio.c @@ -453,17 +453,33 @@ struct vgic_io_device *kvm_to_vgic_iodev(const struct kvm_io_device *dev) return container_of(dev, struct vgic_io_device, dev); } -static bool check_region(const struct vgic_register_region *region, +static bool check_region(const struct kvm *kvm, + const struct vgic_register_region *region, gpa_t addr, int len) { - if ((region->access_flags & VGIC_ACCESS_8bit) && len == 1) - return true; - if ((region->access_flags & VGIC_ACCESS_32bit) && - len == sizeof(u32) && !(addr & 3)) - return true; - if ((region->access_flags & VGIC_ACCESS_64bit) && - len == sizeof(u64) && !(addr & 7)) - return true; + int flags, nr_irqs = kvm->arch.vgic.nr_spis + VGIC_NR_PRIVATE_IRQS; + + switch (len) { + case sizeof(u8): + flags = VGIC_ACCESS_8bit; + break; + case sizeof(u32): + flags = VGIC_ACCESS_32bit; + break; + case sizeof(u64): + flags = VGIC_ACCESS_64bit; + break; + default: + return false; + } + + if ((region->access_flags & flags) && IS_ALIGNED(addr, len)) { + if (!region->bits_per_irq) + return true; + + /* Do we access a non-allocated IRQ? */ + return VGIC_ADDR_TO_INTID(addr, region->bits_per_irq) < nr_irqs; + } return false; } @@ -477,7 +493,7 @@ static int dispatch_mmio_read(struct kvm_vcpu *vcpu, struct kvm_io_device *dev, region = vgic_find_mmio_region(iodev->regions, iodev->nr_regions, addr - iodev->base_addr); - if (!region || !check_region(region, addr, len)) { + if (!region || !check_region(vcpu->kvm, region, addr, len)) { memset(val, 0, len); return 0; } @@ -510,10 +526,7 @@ static int dispatch_mmio_write(struct kvm_vcpu *vcpu, struct kvm_io_device *dev, region = vgic_find_mmio_region(iodev->regions, iodev->nr_regions, addr - iodev->base_addr); - if (!region) - return 0; - - if (!check_region(region, addr, len)) + if (!region || !check_region(vcpu->kvm, region, addr, len)) return 0; switch (iodev->iodev_type) { diff --git a/virt/kvm/arm/vgic/vgic-mmio.h b/virt/kvm/arm/vgic/vgic-mmio.h index 4c34d39d44a0..84961b4e4422 100644 --- a/virt/kvm/arm/vgic/vgic-mmio.h +++ b/virt/kvm/arm/vgic/vgic-mmio.h @@ -50,15 +50,15 @@ extern struct kvm_io_device_ops kvm_io_gic_ops; #define VGIC_ADDR_IRQ_MASK(bits) (((bits) * 1024 / 8) - 1) /* - * (addr & mask) gives us the byte offset for the INT ID, so we want to - * divide this with 'bytes per irq' to get the INT ID, which is given - * by '(bits) / 8'. But we do this with fixed-point-arithmetic and - * take advantage of the fact that division by a fraction equals - * multiplication with the inverted fraction, and scale up both the - * numerator and denominator with 8 to support at most 64 bits per IRQ: + * (addr & mask) gives us the _byte_ offset for the INT ID. + * We multiply this by 8 the get the _bit_ offset, then divide this by + * the number of bits to learn the actual INT ID. + * But instead of a division (which requires a "long long div" implementation), + * we shift by the binary logarithm of . + * This assumes that is a power of two. */ #define VGIC_ADDR_TO_INTID(addr, bits) (((addr) & VGIC_ADDR_IRQ_MASK(bits)) * \ - 64 / (bits) / 8) + 8 >> ilog2(bits)) /* * Some VGIC registers store per-IRQ information, with a different number -- cgit From d42c79701a3ee5c38fbbc82f98a140420bd40134 Mon Sep 17 00:00:00 2001 From: Shih-Wei Li Date: Thu, 27 Oct 2016 15:08:13 +0000 Subject: KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs In cases like IPI, we could be queueing an interrupt for a VCPU that is already running and is not about to exit, because the VCPU has entered the VM with the interrupt pending and would not trap on EOI'ing that interrupt. This could result to delays in interrupt deliveries or even loss of interrupts. To guarantee prompt interrupt injection, here we have to try to kick the VCPU. Signed-off-by: Shih-Wei Li Reviewed-by: Christoffer Dall Signed-off-by: Marc Zyngier --- virt/kvm/arm/vgic/vgic.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c index 2893d5ba523a..6440b56ec90e 100644 --- a/virt/kvm/arm/vgic/vgic.c +++ b/virt/kvm/arm/vgic/vgic.c @@ -273,6 +273,18 @@ retry: * no more work for us to do. */ spin_unlock(&irq->irq_lock); + + /* + * We have to kick the VCPU here, because we could be + * queueing an edge-triggered interrupt for which we + * get no EOI maintenance interrupt. In that case, + * while the IRQ is already on the VCPU's AP list, the + * VCPU could have EOI'ed the original interrupt and + * won't see this one until it exits for some other + * reason. + */ + if (vcpu) + kvm_vcpu_kick(vcpu); return false; } -- cgit From 87dc02551c509703123a60dd7f043d75e92a6aed Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Fri, 4 Nov 2016 01:48:42 +0200 Subject: net/mlx5e: Fix XDP error path of mlx5e_open_channel() In case of mlx5e_open_rq fails the error handling will jump to label err_close_xdp_sq and will try to close the xdp_sq unconditionally. xdp_sq is valid only in case of XDP use cases, i.e priv->xdp_prog is not null. To fix this in this patch we test xdp_sq validity prior to closing it. In addition we now close the xdp_sq.cq as well. Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support") Signed-off-by: Saeed Mahameed Reported-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index f4c687ce4c59..c83619d081d8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1512,7 +1512,10 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, return 0; err_close_xdp_sq: - mlx5e_close_sq(&c->xdp_sq); + if (priv->xdp_prog) { + mlx5e_close_sq(&c->xdp_sq); + mlx5e_close_cq(&c->xdp_sq.cq); + } err_close_sqs: mlx5e_close_sqs(c); -- cgit From d7a0ecab380c62ccd9fbe2e08dd720f7a367d6ee Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Fri, 4 Nov 2016 01:48:43 +0200 Subject: net/mlx5e: Re-arrange XDP SQ/CQ creation In mlx5e_open_channel CQs must be created before napi is enabled. Here we move the XDP CQ creation to satisfy that fact. mlx5e_close_channel is already working according to the right order. Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support") Signed-off-by: Saeed Mahameed Reported-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 32 +++++++++++------------ 1 file changed, 15 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index c83619d081d8..84e8b250e2af 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1445,6 +1445,7 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, c->netdev = priv->netdev; c->mkey_be = cpu_to_be32(priv->mdev->mlx5e_res.mkey.key); c->num_tc = priv->params.num_tc; + c->xdp = !!priv->xdp_prog; if (priv->params.rx_am_enabled) rx_cq_profile = mlx5e_am_get_def_profile(priv->params.rx_cq_period_mode); @@ -1468,6 +1469,12 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, if (err) goto err_close_tx_cqs; + /* XDP SQ CQ params are same as normal TXQ sq CQ params */ + err = c->xdp ? mlx5e_open_cq(c, &cparam->tx_cq, &c->xdp_sq.cq, + priv->params.tx_cq_moderation) : 0; + if (err) + goto err_close_rx_cq; + napi_enable(&c->napi); err = mlx5e_open_sq(c, 0, &cparam->icosq, &c->icosq); @@ -1488,21 +1495,10 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, } } - if (priv->xdp_prog) { - /* XDP SQ CQ params are same as normal TXQ sq CQ params */ - err = mlx5e_open_cq(c, &cparam->tx_cq, &c->xdp_sq.cq, - priv->params.tx_cq_moderation); - if (err) - goto err_close_sqs; - - err = mlx5e_open_sq(c, 0, &cparam->xdp_sq, &c->xdp_sq); - if (err) { - mlx5e_close_cq(&c->xdp_sq.cq); - goto err_close_sqs; - } - } + err = c->xdp ? mlx5e_open_sq(c, 0, &cparam->xdp_sq, &c->xdp_sq) : 0; + if (err) + goto err_close_sqs; - c->xdp = !!priv->xdp_prog; err = mlx5e_open_rq(c, &cparam->rq, &c->rq); if (err) goto err_close_xdp_sq; @@ -1512,10 +1508,8 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, return 0; err_close_xdp_sq: - if (priv->xdp_prog) { + if (c->xdp) mlx5e_close_sq(&c->xdp_sq); - mlx5e_close_cq(&c->xdp_sq.cq); - } err_close_sqs: mlx5e_close_sqs(c); @@ -1525,6 +1519,10 @@ err_close_icosq: err_disable_napi: napi_disable(&c->napi); + if (c->xdp) + mlx5e_close_cq(&c->xdp_sq.cq); + +err_close_rx_cq: mlx5e_close_cq(&c->rq.cq); err_close_tx_cqs: -- cgit From abd3277287c7743d3999b801c6769e8ad1b381dd Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Fri, 4 Nov 2016 01:48:44 +0200 Subject: net/mlx5e: Disallow changing name-space for VF representors VF reps should be altogether on the same NS as they were created. Signed-off-by: Or Gerlitz Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 7fe6559e4ab3..bf1c09ca73c0 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -308,7 +308,7 @@ static void mlx5e_build_rep_netdev(struct net_device *netdev) netdev->switchdev_ops = &mlx5e_rep_switchdev_ops; #endif - netdev->features |= NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_TC; + netdev->features |= NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_TC | NETIF_F_NETNS_LOCAL; netdev->hw_features |= NETIF_F_HW_TC; eth_hw_addr_random(netdev); -- cgit From 358d79a47e5a8db83925241629252cfe64f225f7 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Fri, 4 Nov 2016 01:48:45 +0200 Subject: net/mlx5e: Handle matching on vlan priority for offloaded TC rules We ignored the vlan priority in offloaded TC rules matching part, fix that. Fixes: 095b6cfd69ce ('net/mlx5e: Add TC vlan match parsing') Signed-off-by: Or Gerlitz Reported-by: Paul Blakey Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index ce8c54d18906..6bb21b31cfeb 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -237,12 +237,15 @@ static int parse_cls_flower(struct mlx5e_priv *priv, struct mlx5_flow_spec *spec skb_flow_dissector_target(f->dissector, FLOW_DISSECTOR_KEY_VLAN, f->mask); - if (mask->vlan_id) { + if (mask->vlan_id || mask->vlan_priority) { MLX5_SET(fte_match_set_lyr_2_4, headers_c, vlan_tag, 1); MLX5_SET(fte_match_set_lyr_2_4, headers_v, vlan_tag, 1); MLX5_SET(fte_match_set_lyr_2_4, headers_c, first_vid, mask->vlan_id); MLX5_SET(fte_match_set_lyr_2_4, headers_v, first_vid, key->vlan_id); + + MLX5_SET(fte_match_set_lyr_2_4, headers_c, first_prio, mask->vlan_priority); + MLX5_SET(fte_match_set_lyr_2_4, headers_v, first_prio, key->vlan_priority); } } -- cgit From ee39fbc4447d5c42640963b559bf68490cb45308 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Fri, 4 Nov 2016 01:48:46 +0200 Subject: net/mlx5: E-Switch, Set the actions for offloaded rules properly As for the current generation of the mlx5 HW (CX4/CX4-Lx) per flow vlan push/pop actions are emulated, we must not program them to the firmware. Fixes: f5f82476090f ('net/mlx5: E-Switch, Support VLAN actions in the offloads mode') Signed-off-by: Or Gerlitz Reported-by: Paul Blakey Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index c55ad8d00c05..d239f5d0ea36 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -57,7 +57,8 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw, if (esw->mode != SRIOV_OFFLOADS) return ERR_PTR(-EOPNOTSUPP); - action = attr->action; + /* per flow vlan pop/push is emulated, don't set that into the firmware */ + action = attr->action & ~(MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH | MLX5_FLOW_CONTEXT_ACTION_VLAN_POP); if (action & MLX5_FLOW_CONTEXT_ACTION_FWD_DEST) { dest.type = MLX5_FLOW_DESTINATION_TYPE_VPORT; -- cgit From 0e97a34083a03c931d4e9b34ba7899c29a09dce6 Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Fri, 4 Nov 2016 01:48:47 +0200 Subject: net/mlx5: Fix invalid pointer reference when prof_sel parameter is invalid When prof_sel is invalid, mlx5_core_warn is called but the mlx5_core_dev is not initialized yet. Solution is moving the prof_sel code after dev->pdev assignment Fixes: 2974ab6e8bd8 ('net/mlx5: Improve driver log messages') Signed-off-by: Huy Nguyen Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index d5433c49b2b0..3eb931585b3e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1226,6 +1226,9 @@ static int init_one(struct pci_dev *pdev, pci_set_drvdata(pdev, dev); + dev->pdev = pdev; + dev->event = mlx5_core_event; + if (prof_sel < 0 || prof_sel >= ARRAY_SIZE(profile)) { mlx5_core_warn(dev, "selected profile out of range, selecting default (%d)\n", @@ -1233,8 +1236,6 @@ static int init_one(struct pci_dev *pdev, prof_sel = MLX5_DEFAULT_PROF; } dev->profile = &profile[prof_sel]; - dev->pdev = pdev; - dev->event = mlx5_core_event; INIT_LIST_HEAD(&priv->ctx_list); spin_lock_init(&priv->ctx_lock); -- cgit From 147b36d5b70c083cc76770c47d60b347e8eaf231 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 31 Oct 2016 21:46:24 +0200 Subject: i2c: core: fix NULL pointer dereference under race condition Race condition between registering an I2C device driver and deregistering an I2C adapter device which is assumed to manage that I2C device may lead to a NULL pointer dereference due to the uninitialized list head of driver clients. The root cause of the issue is that the I2C bus may know about the registered device driver and thus it is matched by bus_for_each_drv(), but the list of clients is not initialized and commonly it is NULL, because I2C device drivers define struct i2c_driver as static and clients field is expected to be initialized by I2C core: i2c_register_driver() i2c_del_adapter() driver_register() ... bus_add_driver() ... ... bus_for_each_drv(..., __process_removed_adapter) ... i2c_do_del_adapter() ... list_for_each_entry_safe(..., &driver->clients, ...) INIT_LIST_HEAD(&driver->clients); To solve the problem it is sufficient to do clients list head initialization before calling driver_register(). The problem was found while using an I2C device driver with a sluggish registration routine on a bus provided by a physically detachable I2C master controller, but practically the oops may be reproduced under the race between arbitraty I2C device driver registration and managing I2C bus device removal e.g. by unbinding the latter over sysfs: % echo 21a4000.i2c > /sys/bus/platform/drivers/imx-i2c/unbind Unable to handle kernel NULL pointer dereference at virtual address 00000000 Internal error: Oops: 17 [#1] SMP ARM CPU: 2 PID: 533 Comm: sh Not tainted 4.9.0-rc3+ #61 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) task: e5ada400 task.stack: e4936000 PC is at i2c_do_del_adapter+0x20/0xcc LR is at __process_removed_adapter+0x14/0x1c Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 35bd004a DAC: 00000051 Process sh (pid: 533, stack limit = 0xe4936210) Stack: (0xe4937d28 to 0xe4938000) Backtrace: [] (i2c_do_del_adapter) from [] (__process_removed_adapter+0x14/0x1c) [] (__process_removed_adapter) from [] (bus_for_each_drv+0x6c/0xa0) [] (bus_for_each_drv) from [] (i2c_del_adapter+0xbc/0x284) [] (i2c_del_adapter) from [] (i2c_imx_remove+0x44/0x164 [i2c_imx]) [] (i2c_imx_remove [i2c_imx]) from [] (platform_drv_remove+0x2c/0x44) [] (platform_drv_remove) from [] (__device_release_driver+0x90/0x12c) [] (__device_release_driver) from [] (device_release_driver+0x28/0x34) [] (device_release_driver) from [] (unbind_store+0x80/0x104) [] (unbind_store) from [] (drv_attr_store+0x28/0x34) [] (drv_attr_store) from [] (sysfs_kf_write+0x50/0x54) [] (sysfs_kf_write) from [] (kernfs_fop_write+0x100/0x214) [] (kernfs_fop_write) from [] (__vfs_write+0x34/0x120) [] (__vfs_write) from [] (vfs_write+0xa8/0x170) [] (vfs_write) from [] (SyS_write+0x4c/0xa8) [] (SyS_write) from [] (ret_fast_syscall+0x0/0x1c) Signed-off-by: Vladimir Zapolskiy Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/i2c-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 1704fc84d647..b432b64e307a 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -2179,6 +2179,7 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) /* add the driver to the list of i2c drivers in the driver core */ driver->driver.owner = owner; driver->driver.bus = &i2c_bus_type; + INIT_LIST_HEAD(&driver->clients); /* When registration returns, the driver core * will have called probe() for all matching-but-unbound devices. @@ -2189,7 +2190,6 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) pr_debug("driver [%s] registered\n", driver->driver.name); - INIT_LIST_HEAD(&driver->clients); /* Walk the adapters that are already present */ i2c_for_each_dev(driver, __process_new_driver); -- cgit From 416379f9ebded501eda882e6af0a7aafc1866700 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Fri, 14 Oct 2016 23:54:55 +0200 Subject: PCI: designware: Check for iATU unroll support after initializing host dw_pcie_iatu_unroll_enabled() reads a dbi_base register. Reading any dbi_base register before pp->ops->host_init has been called causes "imprecise external abort" on platforms like ARTPEC-6, where the PCIe module is disabled at boot and first enabled in pp->ops->host_init. Move dw_pcie_iatu_unroll_enabled() to dw_pcie_setup_rc(), since it is after pp->ops->host_init, but before pp->iatu_unroll_enabled is actually used. Fixes: a0601a470537 ("PCI: designware: Add iATU Unroll feature") Tested-by: James Le Cuirot Signed-off-by: Niklas Cassel Signed-off-by: Bjorn Helgaas Acked-by: Joao Pinto Acked-by: Olof Johansson --- drivers/pci/host/pcie-designware.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index 035f50c03281..bed19994c1e9 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -637,8 +637,6 @@ int dw_pcie_host_init(struct pcie_port *pp) } } - pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp); - if (pp->ops->host_init) pp->ops->host_init(pp); @@ -809,6 +807,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp) { u32 val; + /* get iATU unroll support */ + pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp); + dev_dbg(pp->dev, "iATU unroll: %s\n", + pp->iatu_unroll_enabled ? "enabled" : "disabled"); + /* set the number of lanes */ val = dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL); val &= ~PORT_LINK_MODE_MASK; -- cgit From 56211121c0825cd188caad05574fdc518d5cac6f Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 31 Oct 2016 16:57:32 +0200 Subject: pinctrl: cherryview: Serialize register access in suspend/resume If async suspend is enabled, the driver may access registers concurrently with another instance which may fail because of the bug in Cherryview GPIO hardware. Prevent this by taking the shared lock while accessing the hardware in suspend and resume hooks. Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-cherryview.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c index 30389f4ccab4..097d835b3a50 100644 --- a/drivers/pinctrl/intel/pinctrl-cherryview.c +++ b/drivers/pinctrl/intel/pinctrl-cherryview.c @@ -1656,8 +1656,11 @@ static int chv_pinctrl_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct chv_pinctrl *pctrl = platform_get_drvdata(pdev); + unsigned long flags; int i; + raw_spin_lock_irqsave(&chv_lock, flags); + pctrl->saved_intmask = readl(pctrl->regs + CHV_INTMASK); for (i = 0; i < pctrl->community->npins; i++) { @@ -1678,6 +1681,8 @@ static int chv_pinctrl_suspend(struct device *dev) ctx->padctrl1 = readl(reg); } + raw_spin_unlock_irqrestore(&chv_lock, flags); + return 0; } @@ -1685,8 +1690,11 @@ static int chv_pinctrl_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct chv_pinctrl *pctrl = platform_get_drvdata(pdev); + unsigned long flags; int i; + raw_spin_lock_irqsave(&chv_lock, flags); + /* * Mask all interrupts before restoring per-pin configuration * registers because we don't know in which state BIOS left them @@ -1731,6 +1739,8 @@ static int chv_pinctrl_resume(struct device *dev) chv_writel(0xffff, pctrl->regs + CHV_INTSTAT); chv_writel(pctrl->saved_intmask, pctrl->regs + CHV_INTMASK); + raw_spin_unlock_irqrestore(&chv_lock, flags); + return 0; } #endif -- cgit From d2cdf5dc58f6970e9d9d26e47974c21fe87983f3 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 31 Oct 2016 16:57:33 +0200 Subject: pinctrl: cherryview: Prevent possible interrupt storm on resume When the system is suspended to S3 the BIOS might re-initialize certain GPIO pins back to their original state or it may re-program interrupt mask of others. For example Acer TravelMate B116-M had BIOS bug where certain GPIO pin (MF_ISH_GPIO_5) was programmed to trigger on high level, and the pin state was high once the BIOS gave control to the OS on resume. This triggers lots of messages like: irq 117, desc: ffff88017a61e600, depth: 1, count: 0, unhandled: 0 ->handle_irq(): ffffffff8109b613, handle_bad_irq+0x0/0x1e0 ->irq_data.chip(): ffffffffa0020180, chv_pinctrl_exit+0x2d84/0x12 [pinctrl_cherryview] ->action(): (null) IRQ_NOPROBE set We reset the mask back to known state in chv_pinctrl_resume() but that is called only after device interrupts have already been enabled. Now, this particular issue was fixed by upgrading the BIOS to the latest (v1.23) but not everybody upgrades their BIOSes so we fix it up in the driver as well. Prevent the possible interrupt storm by moving suspend and resume hooks to be called at _noirq time instead. Since device interrupts are still disabled we can restore the mask back to known state before interrupt storm happens. Cc: stable@vger.kernel.org Reported-by: Christian Steiner Signed-off-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-cherryview.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c index 097d835b3a50..c43b1e9a06af 100644 --- a/drivers/pinctrl/intel/pinctrl-cherryview.c +++ b/drivers/pinctrl/intel/pinctrl-cherryview.c @@ -1652,7 +1652,7 @@ static int chv_pinctrl_probe(struct platform_device *pdev) } #ifdef CONFIG_PM_SLEEP -static int chv_pinctrl_suspend(struct device *dev) +static int chv_pinctrl_suspend_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct chv_pinctrl *pctrl = platform_get_drvdata(pdev); @@ -1686,7 +1686,7 @@ static int chv_pinctrl_suspend(struct device *dev) return 0; } -static int chv_pinctrl_resume(struct device *dev) +static int chv_pinctrl_resume_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct chv_pinctrl *pctrl = platform_get_drvdata(pdev); @@ -1746,7 +1746,8 @@ static int chv_pinctrl_resume(struct device *dev) #endif static const struct dev_pm_ops chv_pinctrl_pm_ops = { - SET_LATE_SYSTEM_SLEEP_PM_OPS(chv_pinctrl_suspend, chv_pinctrl_resume) + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(chv_pinctrl_suspend_noirq, + chv_pinctrl_resume_noirq) }; static const struct acpi_device_id chv_pinctrl_acpi_match[] = { -- cgit From 3984903a2e3906d3def220e688040ce93368200a Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Thu, 27 Oct 2016 11:27:25 +0530 Subject: rtc: omap: Fix selecting external osc RTC can be clocked from an external 32KHz oscillator, or from the Peripheral PLL. The RTC has an internal oscillator buffer to support direct operation with a crystal. ---------------------------------------- | Device --------- | | | | | | | RTCSS | | | --------- | | | OSC |<------| RTC | | | | |------>| OSC |--- | | | | -------- | | | | | ----|clk | | | -------- | | | | | | PRCM |--- | | | | -------- -------- | ---------------------------------------- The RTC functional clock is sourced by default from the clock derived from the Peripheral PLL. In order to select source as external osc clk the following changes needs to be done: - Enable the RTC OSC (RTC_OSC_REG[4]OSC32K_GZ = 0) - Enable the clock mux(RTC_OSC_REG[6]K32CLK_EN = 1) - Select the external clock source (RTC_OSC_REG[3]32KCLK_SEL = 1) Fixes: 399cf0f63f6f2 ("rtc: omap: Add external clock enabling support") Signed-off-by: Keerthy Signed-off-by: Lokesh Vutla Signed-off-by: Dave Gerlach Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-omap.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index b04ea9b5ae67..dddaa60871b9 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -113,6 +113,7 @@ /* OMAP_RTC_OSC_REG bit fields: */ #define OMAP_RTC_OSC_32KCLK_EN BIT(6) #define OMAP_RTC_OSC_SEL_32KCLK_SRC BIT(3) +#define OMAP_RTC_OSC_OSC32K_GZ_DISABLE BIT(4) /* OMAP_RTC_IRQWAKEEN bit fields: */ #define OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN BIT(1) @@ -786,8 +787,9 @@ static int omap_rtc_probe(struct platform_device *pdev) */ if (rtc->has_ext_clk) { reg = rtc_read(rtc, OMAP_RTC_OSC_REG); - rtc_write(rtc, OMAP_RTC_OSC_REG, - reg | OMAP_RTC_OSC_SEL_32KCLK_SRC); + reg &= ~OMAP_RTC_OSC_OSC32K_GZ_DISABLE; + reg |= OMAP_RTC_OSC_32KCLK_EN | OMAP_RTC_OSC_SEL_32KCLK_SRC; + rtc_writel(rtc, OMAP_RTC_OSC_REG, reg); } rtc->type->lock(rtc); -- cgit From efce21fc43e00a76aee7b0a1eda73730ed2d5d3a Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 27 Oct 2016 11:27:26 +0530 Subject: rtc: omap: prevent disabling of clock/module during suspend If RTC is running from an internal clock source, the RTC module can't be disabled; otherwise it stops ticking completely. Current suspend handler implementation disables the clock/module unconditionally, instead fix this by disabling the clock only if we are running on external clock source, which is not affected by suspend. The prevention of disabling the clock must be done via implementing the runtime_pm handlers for the device, and returning an error code from the runtime suspend handler; otherwise OMAP core PM will disable the clocks for the driver. Signed-off-by: Tero Kristo Signed-off-by: Keerthy Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-omap.c | 32 ++++++++++++++++++++++++++------ 1 file changed, 26 insertions(+), 6 deletions(-) diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index dddaa60871b9..51e52446eacb 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -147,6 +147,7 @@ struct omap_rtc { u8 interrupts_reg; bool is_pmic_controller; bool has_ext_clk; + bool is_suspending; const struct omap_rtc_device_type *type; struct pinctrl_dev *pctldev; }; @@ -900,8 +901,7 @@ static int omap_rtc_suspend(struct device *dev) rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, 0); rtc->type->lock(rtc); - /* Disable the clock/module */ - pm_runtime_put_sync(dev); + rtc->is_suspending = true; return 0; } @@ -910,9 +910,6 @@ static int omap_rtc_resume(struct device *dev) { struct omap_rtc *rtc = dev_get_drvdata(dev); - /* Enable the clock/module so that we can access the registers */ - pm_runtime_get_sync(dev); - rtc->type->unlock(rtc); if (device_may_wakeup(dev)) disable_irq_wake(rtc->irq_alarm); @@ -920,11 +917,34 @@ static int omap_rtc_resume(struct device *dev) rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, rtc->interrupts_reg); rtc->type->lock(rtc); + rtc->is_suspending = false; + return 0; } #endif -static SIMPLE_DEV_PM_OPS(omap_rtc_pm_ops, omap_rtc_suspend, omap_rtc_resume); +#ifdef CONFIG_PM +static int omap_rtc_runtime_suspend(struct device *dev) +{ + struct omap_rtc *rtc = dev_get_drvdata(dev); + + if (rtc->is_suspending && !rtc->has_ext_clk) + return -EBUSY; + + return 0; +} + +static int omap_rtc_runtime_resume(struct device *dev) +{ + return 0; +} +#endif + +static const struct dev_pm_ops omap_rtc_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(omap_rtc_suspend, omap_rtc_resume) + SET_RUNTIME_PM_OPS(omap_rtc_runtime_suspend, + omap_rtc_runtime_resume, NULL) +}; static void omap_rtc_shutdown(struct platform_device *pdev) { -- cgit From 98430c7aad6a3fdedcc78a0d6780dabb6580dc38 Mon Sep 17 00:00:00 2001 From: Randy Li Date: Tue, 25 Oct 2016 22:15:34 +0800 Subject: phy: Add reset callback for not generic phy Add a dummy function for phy_reset in case the CONFIG_GENERIC_PHY is disabled. Signed-off-by: Randy Li Signed-off-by: Kishon Vijay Abraham I --- include/linux/phy/phy.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index ee1bed7dbfc6..78bb0d7f6b11 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -253,6 +253,13 @@ static inline int phy_set_mode(struct phy *phy, enum phy_mode mode) return -ENOSYS; } +static inline int phy_reset(struct phy *phy) +{ + if (!phy) + return 0; + return -ENOSYS; +} + static inline int phy_get_bus_width(struct phy *phy) { return -ENOSYS; -- cgit From 766325427fdb2a6816778b39331637761bccf13a Mon Sep 17 00:00:00 2001 From: Axel Haslam Date: Thu, 3 Nov 2016 17:03:07 +0100 Subject: phy: da8xx-usb: rename the ohci device to ohci-da8xx The ohci device name has changed in the board configuraion files, hence, change the phy lookup table to match the new name. Signed-off-by: Axel Haslam Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-da8xx-usb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c index 32ae78c8ca17..c85fb0b59729 100644 --- a/drivers/phy/phy-da8xx-usb.c +++ b/drivers/phy/phy-da8xx-usb.c @@ -198,7 +198,8 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev) } else { int ret; - ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0"); + ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy", + "ohci-da8xx"); if (ret) dev_warn(dev, "Failed to create usb11 phy lookup\n"); ret = phy_create_lookup(d_phy->usb20_phy, "usb-phy", @@ -216,7 +217,7 @@ static int da8xx_usb_phy_remove(struct platform_device *pdev) if (!pdev->dev.of_node) { phy_remove_lookup(d_phy->usb20_phy, "usb-phy", "musb-da8xx"); - phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0"); + phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci-da8xx"); } return 0; -- cgit From 232c260982ab0100cbb29055933e45b928252687 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Thu, 13 Oct 2016 12:42:13 +0800 Subject: phy-rockchip-pcie: remove deassert of phy_rst from exit callback The deassert of phy_rst from exit callback is incorrect as when doing phy_exit, we expect the phy_rst is on asserted state which was done by power_off callback, but not deasserted state. Meanwhile when disabling clk_pciephy_ref, the assert/deassert signal can't actually take effect on the phy. So let's fix it anyway. Signed-off-by: Shawn Lin Reviewed-by: Heiko Stuebner Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-rockchip-pcie.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/phy/phy-rockchip-pcie.c b/drivers/phy/phy-rockchip-pcie.c index a2b4c6b58aea..6904633cad68 100644 --- a/drivers/phy/phy-rockchip-pcie.c +++ b/drivers/phy/phy-rockchip-pcie.c @@ -249,21 +249,10 @@ err_refclk: static int rockchip_pcie_phy_exit(struct phy *phy) { struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy); - int err = 0; clk_disable_unprepare(rk_phy->clk_pciephy_ref); - err = reset_control_deassert(rk_phy->phy_rst); - if (err) { - dev_err(&phy->dev, "deassert phy_rst err %d\n", err); - goto err_reset; - } - - return err; - -err_reset: - clk_prepare_enable(rk_phy->clk_pciephy_ref); - return err; + return 0; } static const struct phy_ops ops = { -- cgit From 4320f9d4c1831fd4d244a9de8f81bc27ea67699c Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Sat, 29 Oct 2016 00:27:01 +0800 Subject: phy: sun4i: check PMU presence when poking unknown bit of pmu Allwinner SoC's PHY 0, when used as OTG controller, have no pmu part. The code that poke some unknown bit of PMU for H3/A64 didn't check the PHY, and will cause kernel oops when PHY 0 is used. This patch will check whether the pmu is not NULL before poking. Fixes: b3e0d141ca9f (phy: sun4i: add support for A64 usb phy) Signed-off-by: Icenowy Zheng Acked-by: Maxime Ripard Reviewed-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-sun4i-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index b9342a2af7b3..fec34f5213c4 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -264,7 +264,7 @@ static int sun4i_usb_phy_init(struct phy *_phy) return ret; } - if (data->cfg->enable_pmu_unk1) { + if (phy->pmu && data->cfg->enable_pmu_unk1) { val = readl(phy->pmu + REG_PMU_UNK1); writel(val & ~2, phy->pmu + REG_PMU_UNK1); } -- cgit From c2ed83f5426624beda0ecfcb17df033fe4bff7f7 Mon Sep 17 00:00:00 2001 From: Even Xu Date: Fri, 21 Oct 2016 15:48:38 -0700 Subject: HID: intel-ish-hid: consolidate ish wake up operation Same operations are done in ish_hw_start() and _ish_hw_reset() to wakeup ISH device. Consolidate them by introducing a new function ish_wakeup() and move the code there. Signed-off-by: Even Xu Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ipc/ipc.c | 45 +++++++++++++++++++++---------------- 1 file changed, 26 insertions(+), 19 deletions(-) diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c index e2517c11e0ee..d4c57214ba6c 100644 --- a/drivers/hid/intel-ish-hid/ipc/ipc.c +++ b/drivers/hid/intel-ish-hid/ipc/ipc.c @@ -637,6 +637,28 @@ eoi: return IRQ_HANDLED; } +/** + * ish_wakeup() - wakeup ishfw from waiting-for-host state + * @dev: ishtp device pointer + * + * Set the dma enable bit and send a void message to FW, + * it wil wakeup FW from waiting-for-host state. + */ +static void ish_wakeup(struct ishtp_device *dev) +{ + /* Set dma enable bit */ + ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED); + + /* + * Send 0 IPC message so that ISH FW wakes up if it was already + * asleep. + */ + ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT); + + /* Flush writes to doorbell and REMAP2 */ + ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS); +} + /** * _ish_hw_reset() - HW reset * @dev: ishtp device pointer @@ -690,16 +712,8 @@ static int _ish_hw_reset(struct ishtp_device *dev) csr |= PCI_D0; pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, csr); - ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED); - - /* - * Send 0 IPC message so that ISH FW wakes up if it was already - * asleep - */ - ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT); - - /* Flush writes to doorbell and REMAP2 */ - ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS); + /* Now we can enable ISH DMA operation and wakeup ISHFW */ + ish_wakeup(dev); return 0; } @@ -758,16 +772,9 @@ static int _ish_ipc_reset(struct ishtp_device *dev) int ish_hw_start(struct ishtp_device *dev) { ish_set_host_rdy(dev); - /* After that we can enable ISH DMA operation */ - ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED); - /* - * Send 0 IPC message so that ISH FW wakes up if it was already - * asleep - */ - ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT); - /* Flush write to doorbell */ - ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS); + /* After that we can enable ISH DMA operation and wakeup ISHFW */ + ish_wakeup(dev); set_host_ready(dev); -- cgit From 8b2979febc134f038f3c8396cb04893f96e03b4f Mon Sep 17 00:00:00 2001 From: Even Xu Date: Fri, 21 Oct 2016 15:48:39 -0700 Subject: HID: intel-ish-hid: Move DMA disable code to new function Add a new function ish_disable_dma() and move DMA disable operations here, so that this functionality can be reused. Signed-off-by: Even Xu Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ipc/ipc.c | 42 ++++++++++++++++++++++++++++--------- 1 file changed, 32 insertions(+), 10 deletions(-) diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c index d4c57214ba6c..0e0dfa616fab 100644 --- a/drivers/hid/intel-ish-hid/ipc/ipc.c +++ b/drivers/hid/intel-ish-hid/ipc/ipc.c @@ -637,6 +637,36 @@ eoi: return IRQ_HANDLED; } +/** + * ish_disable_dma() - disable dma communication between host and ISHFW + * @dev: ishtp device pointer + * + * Clear the dma enable bit and wait for dma inactive. + * + * Return: 0 for success else error code. + */ +static int ish_disable_dma(struct ishtp_device *dev) +{ + unsigned int dma_delay; + + /* Clear the dma enable bit */ + ish_reg_write(dev, IPC_REG_ISH_RMP2, 0); + + /* wait for dma inactive */ + for (dma_delay = 0; dma_delay < MAX_DMA_DELAY && + _ish_read_fw_sts_reg(dev) & (IPC_ISH_IN_DMA); + dma_delay += 5) + mdelay(5); + + if (dma_delay >= MAX_DMA_DELAY) { + dev_err(dev->devc, + "Wait for DMA inactive timeout\n"); + return -EBUSY; + } + + return 0; +} + /** * ish_wakeup() - wakeup ishfw from waiting-for-host state * @dev: ishtp device pointer @@ -671,7 +701,6 @@ static int _ish_hw_reset(struct ishtp_device *dev) { struct pci_dev *pdev = dev->pdev; int rv; - unsigned int dma_delay; uint16_t csr; if (!pdev) @@ -686,15 +715,8 @@ static int _ish_hw_reset(struct ishtp_device *dev) return -EINVAL; } - /* Now trigger reset to FW */ - ish_reg_write(dev, IPC_REG_ISH_RMP2, 0); - - for (dma_delay = 0; dma_delay < MAX_DMA_DELAY && - _ish_read_fw_sts_reg(dev) & (IPC_ISH_IN_DMA); - dma_delay += 5) - mdelay(5); - - if (dma_delay >= MAX_DMA_DELAY) { + /* Disable dma communication between FW and host */ + if (ish_disable_dma(dev)) { dev_err(&pdev->dev, "Can't reset - stuck with DMA in-progress\n"); return -EBUSY; -- cgit From 2a1e3b932c5606e2b3671b82eb63929937eb1e0b Mon Sep 17 00:00:00 2001 From: Even Xu Date: Fri, 21 Oct 2016 15:48:40 -0700 Subject: HID: intel-ish-hid: Fix driver reinit failure When built as a module, modprobe followed by rmmod can fail because DMA was still active. So to fix this, DMA needs to be disabled during module exit. This change disables DMA during modules exit and change the ISH PCI device status to D3. Signed-off-by: Even Xu Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ipc/ipc.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c index 0e0dfa616fab..0c9ac4d5d850 100644 --- a/drivers/hid/intel-ish-hid/ipc/ipc.c +++ b/drivers/hid/intel-ish-hid/ipc/ipc.c @@ -905,6 +905,21 @@ struct ishtp_device *ish_dev_init(struct pci_dev *pdev) */ void ish_device_disable(struct ishtp_device *dev) { + struct pci_dev *pdev = dev->pdev; + + if (!pdev) + return; + + /* Disable dma communication between FW and host */ + if (ish_disable_dma(dev)) { + dev_err(&pdev->dev, + "Can't reset - stuck with DMA in-progress\n"); + return; + } + + /* Put ISH to D3hot state for power saving */ + pci_set_power_state(pdev, PCI_D3hot); + dev->dev_state = ISHTP_DEV_DISABLED; ish_clr_host_rdy(dev); } -- cgit From 021afd55e2191248b471b29b9d0a96c267939a4d Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 21 Oct 2016 15:48:41 -0700 Subject: HID: intel-ish-hid: request_irq failure On some platforms ISH interrupt is shared, which causes request_irq to fail. This requires IRQF_SHARED irq flag. But IRQF_NO_SUSPEND and IRQF_SHARED should not be used together, so removed IRQF_NO_SUSPEND flag. Anyway this driver doesn't require IRQF_NO_SUSPEND, as this interrupt is not required during "noirq" phases of suspending and resuming devices as well as during the time when nonboot CPUs are taken offline and brought back online. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ipc/pci-ish.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c index 7e3622a724aa..20d647d2dd2c 100644 --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c @@ -146,7 +146,7 @@ static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; /* request and enable interrupt */ - ret = request_irq(pdev->irq, ish_irq_handler, IRQF_NO_SUSPEND, + ret = request_irq(pdev->irq, ish_irq_handler, IRQF_SHARED, KBUILD_MODNAME, dev); if (ret) { dev_err(&pdev->dev, "ISH: request IRQ failure (%d)\n", -- cgit From 4c4480aad0d8eaf0d52b6f2c8c5dfbe0531cbbea Mon Sep 17 00:00:00 2001 From: "Ooi, Joyce" Date: Thu, 3 Nov 2016 18:55:15 +0800 Subject: HID: sensor: fix attributes in HID sensor interface User is unable to access to input-X-yyy and feature-X-yyy where X is a hex value and more than 9 (e.g. input-a-yyy, feature-b-yyy) in HID sensor custom sysfs interface. This is because when creating the attribute, the attribute index is written to using %x (hex). However, when reading and writing values into the attribute, the attribute index is scanned using %d (decimal). Hence, user is unable to access to attributes with index in hex values (e.g. 'a', 'b', 'c') but able to access to attributes with index in decimal values (e.g. 1, 2, 3,..). This fix will change input-%d-%x-%s and feature-%d-%x-%s to input-%x-%x-%s and feature-%x-%x-%s in show_values() and store_values() accordingly. Signed-off-by: Ooi, Joyce Reviewed-by: Benjamin Tissoires Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/hid-sensor-custom.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hid/hid-sensor-custom.c b/drivers/hid/hid-sensor-custom.c index 5614fee82347..3a84aaf1418b 100644 --- a/drivers/hid/hid-sensor-custom.c +++ b/drivers/hid/hid-sensor-custom.c @@ -292,11 +292,11 @@ static ssize_t show_value(struct device *dev, struct device_attribute *attr, bool input = false; int value = 0; - if (sscanf(attr->attr.name, "feature-%d-%x-%s", &index, &usage, + if (sscanf(attr->attr.name, "feature-%x-%x-%s", &index, &usage, name) == 3) { feature = true; field_index = index + sensor_inst->input_field_count; - } else if (sscanf(attr->attr.name, "input-%d-%x-%s", &index, &usage, + } else if (sscanf(attr->attr.name, "input-%x-%x-%s", &index, &usage, name) == 3) { input = true; field_index = index; @@ -398,7 +398,7 @@ static ssize_t store_value(struct device *dev, struct device_attribute *attr, char name[HID_CUSTOM_NAME_LENGTH]; int value; - if (sscanf(attr->attr.name, "feature-%d-%x-%s", &index, &usage, + if (sscanf(attr->attr.name, "feature-%x-%x-%s", &index, &usage, name) == 3) { field_index = index + sensor_inst->input_field_count; } else -- cgit From 8af644a7d6846f48d6b72be5d4a3c6eb16bd33c8 Mon Sep 17 00:00:00 2001 From: Song Hongyan Date: Tue, 25 Oct 2016 01:06:03 +0000 Subject: iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver) This fix makes newer ISH hubs work. Previous ones worked by lucky coincidence. Rotation sensor function does not work due to miss PM function. Add common hid sensor iio pm function for rotation sensor. Further clarification from Srinivas: If CONFIG_PM is not defined, then this prevents this sensor to function. So above commit caused this. This sensor was supposed to be always on to trigger wake up in prior external hubs. But with the new ISH hub this is not the case. Signed-off-by: Song Hongyan Fixes: 2b89635e9a9e ("iio: hid_sensor_hub: Common PM functions") Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/orientation/hid-sensor-rotation.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/orientation/hid-sensor-rotation.c b/drivers/iio/orientation/hid-sensor-rotation.c index b98b9d94d184..a97e802ca523 100644 --- a/drivers/iio/orientation/hid-sensor-rotation.c +++ b/drivers/iio/orientation/hid-sensor-rotation.c @@ -335,6 +335,7 @@ static struct platform_driver hid_dev_rot_platform_driver = { .id_table = hid_dev_rot_ids, .driver = { .name = KBUILD_MODNAME, + .pm = &hid_sensor_pm_ops, }, .probe = hid_dev_rot_probe, .remove = hid_dev_rot_remove, -- cgit From 6f77199e9e4b84340c751c585691d7642a47d226 Mon Sep 17 00:00:00 2001 From: Song Hongyan Date: Tue, 25 Oct 2016 01:30:07 +0000 Subject: iio: hid-sensors: Increase the precision of scale to fix wrong reading interpretation. While testing, it was observed that on some platforms the scale value from iio sysfs for gyroscope is always 0 (E.g. Yoga 260). This results in the final angular velocity component values to be zeros. This is caused by insufficient precision of scale value displayed in sysfs. If the precision is changed to nano from current micro, then this is sufficient to display the scale value on this platform. Since this can be a problem for all other HID sensors, increase scale precision of all HID sensors to nano from current micro. Results on Yoga 260: name scale before scale now -------------------------------------------- gyro_3d 0.000000 0.000000174 als 0.001000 0.001000000 magn_3d 0.000001 0.000001000 accel_3d 0.000009 0.000009806 Signed-off-by: Song Hongyan Acked-by: Srinivas Pandruvada Cc: Signed-off-by: Jonathan Cameron --- .../iio/common/hid-sensors/hid-sensor-attributes.c | 56 +++++++++++----------- 1 file changed, 28 insertions(+), 28 deletions(-) diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c index dc33c1dd5191..b5beea53d6f6 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c @@ -30,26 +30,26 @@ static struct { u32 usage_id; int unit; /* 0 for default others from HID sensor spec */ int scale_val0; /* scale, whole number */ - int scale_val1; /* scale, fraction in micros */ + int scale_val1; /* scale, fraction in nanos */ } unit_conversion[] = { - {HID_USAGE_SENSOR_ACCEL_3D, 0, 9, 806650}, + {HID_USAGE_SENSOR_ACCEL_3D, 0, 9, 806650000}, {HID_USAGE_SENSOR_ACCEL_3D, HID_USAGE_SENSOR_UNITS_METERS_PER_SEC_SQRD, 1, 0}, {HID_USAGE_SENSOR_ACCEL_3D, - HID_USAGE_SENSOR_UNITS_G, 9, 806650}, + HID_USAGE_SENSOR_UNITS_G, 9, 806650000}, - {HID_USAGE_SENSOR_GYRO_3D, 0, 0, 17453}, + {HID_USAGE_SENSOR_GYRO_3D, 0, 0, 17453293}, {HID_USAGE_SENSOR_GYRO_3D, HID_USAGE_SENSOR_UNITS_RADIANS_PER_SECOND, 1, 0}, {HID_USAGE_SENSOR_GYRO_3D, - HID_USAGE_SENSOR_UNITS_DEGREES_PER_SECOND, 0, 17453}, + HID_USAGE_SENSOR_UNITS_DEGREES_PER_SECOND, 0, 17453293}, - {HID_USAGE_SENSOR_COMPASS_3D, 0, 0, 1000}, + {HID_USAGE_SENSOR_COMPASS_3D, 0, 0, 1000000}, {HID_USAGE_SENSOR_COMPASS_3D, HID_USAGE_SENSOR_UNITS_GAUSS, 1, 0}, - {HID_USAGE_SENSOR_INCLINOMETER_3D, 0, 0, 17453}, + {HID_USAGE_SENSOR_INCLINOMETER_3D, 0, 0, 17453293}, {HID_USAGE_SENSOR_INCLINOMETER_3D, - HID_USAGE_SENSOR_UNITS_DEGREES, 0, 17453}, + HID_USAGE_SENSOR_UNITS_DEGREES, 0, 17453293}, {HID_USAGE_SENSOR_INCLINOMETER_3D, HID_USAGE_SENSOR_UNITS_RADIANS, 1, 0}, @@ -57,7 +57,7 @@ static struct { {HID_USAGE_SENSOR_ALS, HID_USAGE_SENSOR_UNITS_LUX, 1, 0}, {HID_USAGE_SENSOR_PRESSURE, 0, 100, 0}, - {HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 0, 1000}, + {HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 0, 1000000}, }; static int pow_10(unsigned power) @@ -266,15 +266,15 @@ EXPORT_SYMBOL(hid_sensor_write_raw_hyst_value); /* * This fuction applies the unit exponent to the scale. * For example: - * 9.806650 ->exp:2-> val0[980]val1[665000] - * 9.000806 ->exp:2-> val0[900]val1[80600] - * 0.174535 ->exp:2-> val0[17]val1[453500] - * 1.001745 ->exp:0-> val0[1]val1[1745] - * 1.001745 ->exp:2-> val0[100]val1[174500] - * 1.001745 ->exp:4-> val0[10017]val1[450000] - * 9.806650 ->exp:-2-> val0[0]val1[98066] + * 9.806650000 ->exp:2-> val0[980]val1[665000000] + * 9.000806000 ->exp:2-> val0[900]val1[80600000] + * 0.174535293 ->exp:2-> val0[17]val1[453529300] + * 1.001745329 ->exp:0-> val0[1]val1[1745329] + * 1.001745329 ->exp:2-> val0[100]val1[174532900] + * 1.001745329 ->exp:4-> val0[10017]val1[453290000] + * 9.806650000 ->exp:-2-> val0[0]val1[98066500] */ -static void adjust_exponent_micro(int *val0, int *val1, int scale0, +static void adjust_exponent_nano(int *val0, int *val1, int scale0, int scale1, int exp) { int i; @@ -285,32 +285,32 @@ static void adjust_exponent_micro(int *val0, int *val1, int scale0, if (exp > 0) { *val0 = scale0 * pow_10(exp); res = 0; - if (exp > 6) { + if (exp > 9) { *val1 = 0; return; } for (i = 0; i < exp; ++i) { - x = scale1 / pow_10(5 - i); + x = scale1 / pow_10(8 - i); res += (pow_10(exp - 1 - i) * x); - scale1 = scale1 % pow_10(5 - i); + scale1 = scale1 % pow_10(8 - i); } *val0 += res; *val1 = scale1 * pow_10(exp); } else if (exp < 0) { exp = abs(exp); - if (exp > 6) { + if (exp > 9) { *val0 = *val1 = 0; return; } *val0 = scale0 / pow_10(exp); rem = scale0 % pow_10(exp); res = 0; - for (i = 0; i < (6 - exp); ++i) { - x = scale1 / pow_10(5 - i); - res += (pow_10(5 - exp - i) * x); - scale1 = scale1 % pow_10(5 - i); + for (i = 0; i < (9 - exp); ++i) { + x = scale1 / pow_10(8 - i); + res += (pow_10(8 - exp - i) * x); + scale1 = scale1 % pow_10(8 - i); } - *val1 = rem * pow_10(6 - exp) + res; + *val1 = rem * pow_10(9 - exp) + res; } else { *val0 = scale0; *val1 = scale1; @@ -332,14 +332,14 @@ int hid_sensor_format_scale(u32 usage_id, unit_conversion[i].unit == attr_info->units) { exp = hid_sensor_convert_exponent( attr_info->unit_expo); - adjust_exponent_micro(val0, val1, + adjust_exponent_nano(val0, val1, unit_conversion[i].scale_val0, unit_conversion[i].scale_val1, exp); break; } } - return IIO_VAL_INT_PLUS_MICRO; + return IIO_VAL_INT_PLUS_NANO; } EXPORT_SYMBOL(hid_sensor_format_scale); -- cgit From 272d01bd790fdf3f1b16372fe28136e27756756f Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 3 Nov 2016 18:34:34 +0000 Subject: arm64: Fix circular include of asm/lse.h through linux/jump_label.h Commit efd9e03facd0 ("arm64: Use static keys for CPU features") introduced support for static keys in asm/cpufeature.h, including linux/jump_label.h. When CC_HAVE_ASM_GOTO is not defined, this causes a circular dependency via linux/atomic.h, asm/lse.h and asm/cpufeature.h. This patch moves the capability macros out out of asm/cpufeature.h into a separate asm/cpucaps.h and modifies some of the #includes accordingly. Fixes: efd9e03facd0 ("arm64: Use static keys for CPU features") Reported-by: Artem Savkov Tested-by: Artem Savkov Signed-off-by: Catalin Marinas Signed-off-by: Will Deacon --- arch/arm64/include/asm/alternative.h | 2 +- arch/arm64/include/asm/cpucaps.h | 40 ++++++++++++++++++++++++++++++++++++ arch/arm64/include/asm/cpufeature.h | 20 +----------------- arch/arm64/include/asm/lse.h | 1 - 4 files changed, 42 insertions(+), 21 deletions(-) create mode 100644 arch/arm64/include/asm/cpucaps.h diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h index 39feb85a6931..6e1cb8c5af4d 100644 --- a/arch/arm64/include/asm/alternative.h +++ b/arch/arm64/include/asm/alternative.h @@ -1,7 +1,7 @@ #ifndef __ASM_ALTERNATIVE_H #define __ASM_ALTERNATIVE_H -#include +#include #include #ifndef __ASSEMBLY__ diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h new file mode 100644 index 000000000000..87b446535185 --- /dev/null +++ b/arch/arm64/include/asm/cpucaps.h @@ -0,0 +1,40 @@ +/* + * arch/arm64/include/asm/cpucaps.h + * + * Copyright (C) 2016 ARM Ltd. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#ifndef __ASM_CPUCAPS_H +#define __ASM_CPUCAPS_H + +#define ARM64_WORKAROUND_CLEAN_CACHE 0 +#define ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE 1 +#define ARM64_WORKAROUND_845719 2 +#define ARM64_HAS_SYSREG_GIC_CPUIF 3 +#define ARM64_HAS_PAN 4 +#define ARM64_HAS_LSE_ATOMICS 5 +#define ARM64_WORKAROUND_CAVIUM_23154 6 +#define ARM64_WORKAROUND_834220 7 +#define ARM64_HAS_NO_HW_PREFETCH 8 +#define ARM64_HAS_UAO 9 +#define ARM64_ALT_PAN_NOT_UAO 10 +#define ARM64_HAS_VIRT_HOST_EXTN 11 +#define ARM64_WORKAROUND_CAVIUM_27456 12 +#define ARM64_HAS_32BIT_EL0 13 +#define ARM64_HYP_OFFSET_LOW 14 +#define ARM64_MISMATCHED_CACHE_LINE_SIZE 15 + +#define ARM64_NCAPS 16 + +#endif /* __ASM_CPUCAPS_H */ diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index a27c3245ba21..0bc0b1de90c4 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -11,6 +11,7 @@ #include +#include #include #include @@ -24,25 +25,6 @@ #define MAX_CPU_FEATURES (8 * sizeof(elf_hwcap)) #define cpu_feature(x) ilog2(HWCAP_ ## x) -#define ARM64_WORKAROUND_CLEAN_CACHE 0 -#define ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE 1 -#define ARM64_WORKAROUND_845719 2 -#define ARM64_HAS_SYSREG_GIC_CPUIF 3 -#define ARM64_HAS_PAN 4 -#define ARM64_HAS_LSE_ATOMICS 5 -#define ARM64_WORKAROUND_CAVIUM_23154 6 -#define ARM64_WORKAROUND_834220 7 -#define ARM64_HAS_NO_HW_PREFETCH 8 -#define ARM64_HAS_UAO 9 -#define ARM64_ALT_PAN_NOT_UAO 10 -#define ARM64_HAS_VIRT_HOST_EXTN 11 -#define ARM64_WORKAROUND_CAVIUM_27456 12 -#define ARM64_HAS_32BIT_EL0 13 -#define ARM64_HYP_OFFSET_LOW 14 -#define ARM64_MISMATCHED_CACHE_LINE_SIZE 15 - -#define ARM64_NCAPS 16 - #ifndef __ASSEMBLY__ #include diff --git a/arch/arm64/include/asm/lse.h b/arch/arm64/include/asm/lse.h index 23acc00be32d..fc756e22c84c 100644 --- a/arch/arm64/include/asm/lse.h +++ b/arch/arm64/include/asm/lse.h @@ -5,7 +5,6 @@ #include #include -#include #ifdef __ASSEMBLER__ -- cgit From bc33b0ca11e3df467777a4fa7639ba488c9d4911 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 5 Nov 2016 16:23:36 -0700 Subject: Linux 4.9-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index a2650f9c6a25..f97f786de58d 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 9 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Psychotic Stoned Sheep # *DOCUMENTATION* -- cgit From 2c7a5c5c48d97ce3105f3258a259f67b7b9d7eb1 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 24 Sep 2016 07:15:02 -0700 Subject: openrisc: Define __ro_after_init to avoid crash openrisc qemu tests fail with the following crash. Unable to handle kernel access at virtual address 0xc0300c34 Oops#: 0001 CPU #: 0 PC: c016c710 SR: 0000ae67 SP: c1017e04 GPR00: 00000000 GPR01: c1017e04 GPR02: c0300c34 GPR03: c0300c34 GPR04: 00000000 GPR05: c0300cb0 GPR06: c0300c34 GPR07: 000000ff GPR08: c107f074 GPR09: c0199ef4 GPR10: c1016000 GPR11: 00000000 GPR12: 00000000 GPR13: c107f044 GPR14: c0473774 GPR15: 07ce0000 GPR16: 00000000 GPR17: c107ed8a GPR18: 00009600 GPR19: c107f044 GPR20: c107ee74 GPR21: 00000003 GPR22: c0473770 GPR23: 00000033 GPR24: 000000bf GPR25: 00000019 GPR26: c046400c GPR27: 00000001 GPR28: c0464028 GPR29: c1018000 GPR30: 00000006 GPR31: ccf37483 RES: 00000000 oGPR11: ffffffff Process swapper (pid: 1, stackpage=c1001960) Stack: Stack dump [0xc1017cf8]: sp + 00: 0xc1017e04 sp + 04: 0xc0300c34 sp + 08: 0xc0300c34 sp + 12: 0x00000000 ... Bisect points to commit d2ec3f77de8e ("pty: make ptmx file ops read-only after init"). Fix by defining __ro_after_init for the openrisc architecture, similar to parisc. Fixes: d2ec3f77de8e ("pty: make ptmx file ops read-only after init") Cc: Kees Cook Signed-off-by: Guenter Roeck Acked-by: Stafford Horne --- arch/openrisc/include/asm/cache.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/openrisc/include/asm/cache.h b/arch/openrisc/include/asm/cache.h index 4ce7a01a252d..5f55da9cbfd5 100644 --- a/arch/openrisc/include/asm/cache.h +++ b/arch/openrisc/include/asm/cache.h @@ -23,6 +23,8 @@ * they shouldn't be hard-coded! */ +#define __ro_after_init __read_mostly + #define L1_CACHE_BYTES 16 #define L1_CACHE_SHIFT 4 -- cgit From 6d6d36bc6e77f8b1f86d81884ad5149931bb4acd Mon Sep 17 00:00:00 2001 From: Eryu Guan Date: Tue, 1 Nov 2016 15:43:07 +0800 Subject: mm/filemap: don't allow partially uptodate page for pipes Starting from 4.9-rc1 kernel, I started noticing some test failures of sendfile(2) and splice(2) (sendfile0N and splice01 from LTP) when testing on sub-page block size filesystems (tested both XFS and ext4), these syscalls start to return EIO in the tests. e.g. sendfile02 1 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 26, got: -1 sendfile02 2 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 24, got: -1 sendfile02 3 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 22, got: -1 sendfile02 4 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 20, got: -1 This is because that in sub-page block size cases, we don't need the whole page to be uptodate, only the part we care about is uptodate is OK (if fs has ->is_partially_uptodate defined). But page_cache_pipe_buf_confirm() doesn't have the ability to check the partially-uptodate case, it needs the whole page to be uptodate. So it returns EIO in this case. This is a regression introduced by commit 82c156f85384 ("switch generic_file_splice_read() to use of ->read_iter()"). Prior to the change, generic_file_splice_read() doesn't allow partially-uptodate page either, so it worked fine. Fix it by skipping the partially-uptodate check if we're working on a pipe in do_generic_file_read(), so we read the whole page from disk as long as the page is not uptodate. Signed-off-by: Eryu Guan Signed-off-by: Al Viro --- mm/filemap.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/filemap.c b/mm/filemap.c index c7fe2f16503f..50b52fe51937 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1732,6 +1732,9 @@ find_page: if (inode->i_blkbits == PAGE_SHIFT || !mapping->a_ops->is_partially_uptodate) goto page_not_up_to_date; + /* pipes can't handle partially uptodate pages */ + if (unlikely(iter->type & ITER_PIPE)) + goto page_not_up_to_date; if (!trylock_page(page)) goto page_not_up_to_date; /* Did it get truncated before we got the lock? */ -- cgit From 772918524dfb8c8869120728c1b1109a2d49493c Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 30 Oct 2016 05:28:27 +0100 Subject: nbd: Fix error handling 'blk_mq_alloc_request()' returns an error pointer in case of error, not NULL. So test it with IS_ERR. Fixes: fd8383fd88a2 ("nbd: convert to blkmq") Signed-off-by: Christophe JAILLET Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 19a16b2dbb91..7a1048755914 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -599,7 +599,7 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, return -EINVAL; sreq = blk_mq_alloc_request(bdev_get_queue(bdev), WRITE, 0); - if (!sreq) + if (IS_ERR(sreq)) return -ENOMEM; mutex_unlock(&nbd->tx_lock); -- cgit From 9a76a3ac3b9b6326a317c59126cdf9e758f85375 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Mon, 31 Oct 2016 11:49:41 +0900 Subject: Documentation: synopsys-dw-mshc: add binding for reset-names Add reset-names property for binding dw-mmc controller. It might be used together with "reset" property. - Note: It must be "reset" as name. Fixes: d6786fefe816 ("mmc: dw_mmc: add reset support to dwmmc host controller") Signed-off-by: Jaehoon Chung Acked-by: John Stultz Signed-off-by: Ulf Hansson --- Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 4e00e859e885..bfa461aaac99 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -43,6 +43,9 @@ Optional properties: reset signal present internally in some host controller IC designs. See Documentation/devicetree/bindings/reset/reset.txt for details. +* reset-names: request name for using "resets" property. Must be "reset". + (It will be used together with "resets" property.) + * clocks: from common clock binding: handle to biu and ciu clocks for the bus interface unit clock and the card interface unit clock. @@ -103,6 +106,8 @@ board specific portions as listed below. interrupts = <0 75 0>; #address-cells = <1>; #size-cells = <0>; + resets = <&rst 20>; + reset-names = "reset"; }; [board specific internal DMA resources] -- cgit From 3a667e3ff78ae81afc49343c753864cc1ede2f77 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Mon, 31 Oct 2016 11:49:42 +0900 Subject: mmc: dw_mmc: add the "reset" as name of reset controller Add the "reset" as name of reset controller. This is for preventing the wrong operation. Even if some SoC has reset controller, doesn't define "resets" in device-tree. Then it might be waiting for reset controller and it should be stuck. Fixes: d6786fefe816 ("mmc: dw_mmc: add reset support to dwmmc host controller") Signed-off-by: Jaehoon Chung Acked-by: John Stultz Signed-off-by: Ulf Hansson --- drivers/mmc/host/dw_mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 4fcbc4012ed0..50a674be6655 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -2940,7 +2940,7 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) return ERR_PTR(-ENOMEM); /* find reset controller when exist */ - pdata->rstc = devm_reset_control_get_optional(dev, NULL); + pdata->rstc = devm_reset_control_get_optional(dev, "reset"); if (IS_ERR(pdata->rstc)) { if (PTR_ERR(pdata->rstc) == -EPROBE_DEFER) return ERR_PTR(-EPROBE_DEFER); -- cgit From 355f1a39183467d48f20d90adce3b4aa75c6b260 Mon Sep 17 00:00:00 2001 From: David Lechner Date: Tue, 1 Nov 2016 15:47:04 -0500 Subject: usb: musb: da8xx: Don't print phy error on -EPROBE_DEFER This suppresses printing the error message "failed to get phy" in the kernel log when the error is -EPROBE_DEFER. This prevents usless noise in the kernel log. Signed-off-by: David Lechner Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/da8xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 210b7e43a6fd..2440f88e07a3 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -479,7 +479,8 @@ static int da8xx_probe(struct platform_device *pdev) glue->phy = devm_phy_get(&pdev->dev, "usb-phy"); if (IS_ERR(glue->phy)) { - dev_err(&pdev->dev, "failed to get phy\n"); + if (PTR_ERR(glue->phy) != -EPROBE_DEFER) + dev_err(&pdev->dev, "failed to get phy\n"); return PTR_ERR(glue->phy); } -- cgit From 2e52ec2394fb9486fd496737a84d629b2c992db2 Mon Sep 17 00:00:00 2001 From: Kirill Esipov Date: Tue, 1 Nov 2016 15:47:05 -0500 Subject: usb: musb: remove duplicated actions Removing unnecessary duplicated actions that we've got while merging: Commit 19915e623458 ("Merge 4.1-rc7 into usb-next") [ b-liu@ti.com: added 'Commit' in the commit message ] Signed-off-by: Kirill Esipov Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 27dadc0d9114..e01116e4c067 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2114,11 +2114,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb->io.ep_offset = musb_flat_ep_offset; musb->io.ep_select = musb_flat_ep_select; } - /* And override them with platform specific ops if specified. */ - if (musb->ops->ep_offset) - musb->io.ep_offset = musb->ops->ep_offset; - if (musb->ops->ep_select) - musb->io.ep_select = musb->ops->ep_select; /* At least tusb6010 has its own offsets */ if (musb->ops->ep_offset) -- cgit From c289d0eff3d5a594c577c0dc162412a2cad075a4 Mon Sep 17 00:00:00 2001 From: Babu Moger Date: Fri, 21 Oct 2016 15:25:05 -0700 Subject: drivers/usb: Skip auto handoff for TI and RENESAS usb controllers Never seen XHCI auto handoff working on TI and RENESAS cards. Eventually, we force handoff. This code forces the handoff unconditionally. It saves 5 seconds boot time for each card. Signed-off-by: Babu Moger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/pci-quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index d793f548dfe2..a9a1e4c40480 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -995,6 +995,14 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) } val = readl(base + ext_cap_offset); + /* Auto handoff never worked for these devices. Force it and continue */ + if ((pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) || + (pdev->vendor == PCI_VENDOR_ID_RENESAS + && pdev->device == 0x0014)) { + val = (val | XHCI_HC_OS_OWNED) & ~XHCI_HC_BIOS_OWNED; + writel(val, base + ext_cap_offset); + } + /* If the BIOS owns the HC, signal that the OS wants it, and wait */ if (val & XHCI_HC_BIOS_OWNED) { writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset); -- cgit From 7309aa847ead3fa561663b16779a0dde8c64cc7c Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 2 Nov 2016 14:42:52 +0100 Subject: cdc-acm: fix uninitialized variable variable struct usb_cdc_parsed_header h may be used uninitialized in acm_probe. In kernel 4.8. /* handle quirks deadly to normal probing*/ if (quirks == NO_UNION_NORMAL) ... goto skip_normal_probe; } we bypass call to cdc_parse_cdc_header(&h, intf, buffer, buflen); but later use h in if (h.usb_cdc_country_functional_desc) { /* export the country data */ Signed-off-by: Oliver Neukum CC: stable@vger.kernel.org Reported-by: Victor Sologoubov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 78f0f85bebdc..4ad4ca44058b 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1161,6 +1161,8 @@ static int acm_probe(struct usb_interface *intf, if (quirks == IGNORE_DEVICE) return -ENODEV; + memset(&h, 0x00, sizeof(struct usb_cdc_parsed_header)); + num_rx_buf = (quirks == SINGLE_RX_URB) ? 1 : ACM_NR; /* handle quirks deadly to normal probing*/ -- cgit From 33c027ae3cfd8fefb6cccccc5c6b2c07d80891ce Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Thu, 3 Nov 2016 12:48:43 +0800 Subject: staging: sm750fb: Fix bugs introduced by early commits Early commit 30ca5cb63c56965 ("staging: sm750fb: change definition of PANEL_PLANE_TL fields") and 27b047bbe1ee9c0 ("staging: sm750fb: change definition of PANEL_PLANE_BR fields") modify the register bit fields definitions. But the modifications are wrong, because the bit mask of "bit field 10:0" is not 0xeff, but 0x7ff. The wrong definition bugs makes display very strange. Signed-off-by: Huacai Chen Cc: stable # 4.6+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/sm750fb/ddk750_reg.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/staging/sm750fb/ddk750_reg.h b/drivers/staging/sm750fb/ddk750_reg.h index 955247979aaa..4ed6d8d7712a 100644 --- a/drivers/staging/sm750fb/ddk750_reg.h +++ b/drivers/staging/sm750fb/ddk750_reg.h @@ -601,13 +601,13 @@ #define PANEL_PLANE_TL 0x08001C #define PANEL_PLANE_TL_TOP_SHIFT 16 -#define PANEL_PLANE_TL_TOP_MASK (0xeff << 16) -#define PANEL_PLANE_TL_LEFT_MASK 0xeff +#define PANEL_PLANE_TL_TOP_MASK (0x7ff << 16) +#define PANEL_PLANE_TL_LEFT_MASK 0x7ff #define PANEL_PLANE_BR 0x080020 #define PANEL_PLANE_BR_BOTTOM_SHIFT 16 -#define PANEL_PLANE_BR_BOTTOM_MASK (0xeff << 16) -#define PANEL_PLANE_BR_RIGHT_MASK 0xeff +#define PANEL_PLANE_BR_BOTTOM_MASK (0x7ff << 16) +#define PANEL_PLANE_BR_RIGHT_MASK 0x7ff #define PANEL_HORIZONTAL_TOTAL 0x080024 #define PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT 16 -- cgit From a33547cc764ca994d27a8fcc5fc61fbf4b2f7361 Mon Sep 17 00:00:00 2001 From: Andrew Jeffery Date: Thu, 3 Nov 2016 01:07:56 +1030 Subject: pinctrl-aspeed-g5: Never set SCU90[6] MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If a pin depending on bit 6 in SCU90 is requested for GPIO, the export will succeed but changes to the GPIO's value will not be accepted by the hardware. This is because the pinmux driver has misconfigured the SCU by writing 1 to the reserved bit. The description of SCU90[6] from the datasheet is 'Reserved, must keep at value ”0”'. The fix is to switch pinmux from the bit-flipping macro to explicitly configuring the .enable and .disable values to zero. The patch has been tested on an AST2500 EVB. Fixes: 56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver) Reported-by: Uma Yadlapati Signed-off-by: Andrew Jeffery Reviewed-by: Joel Stanley Signed-off-by: Linus Walleij --- drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c index c8c72e8259d3..87b46390b695 100644 --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c @@ -26,7 +26,7 @@ #define ASPEED_G5_NR_PINS 228 -#define COND1 SIG_DESC_BIT(SCU90, 6, 0) +#define COND1 { SCU90, BIT(6), 0, 0 } #define COND2 { SCU94, GENMASK(1, 0), 0, 0 } #define B14 0 -- cgit From 55abe8165f31ffb83ce8b24da959b61362dca4c4 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Thu, 27 Oct 2016 20:28:36 +0100 Subject: staging: comedi: ni_tio: fix buggy ni_tio_clock_period_ps() return value `ni_tio_clock_period_ps()` used to return the clock period in picoseconds, and had a `BUG()` call for invalid cases. It was changed to pass the clock period back via a pointer parameter and return an error for the invalid cases. Unfortunately the code to handle user-specified clock sources with user-specified clock period is still returning the clock period the old way, which can lead to the caller not getting the clock period, or seeing an unexpected error. Fix it by passing the clock period via the pointer parameter and returning `0`. Fixes: b42ca86ad605 ("staging: comedi: ni_tio: remove BUG() checks for ni_tio_get_clock_src()") Signed-off-by: Ian Abbott Cc: # 4.7+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_tio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/ni_tio.c b/drivers/staging/comedi/drivers/ni_tio.c index 7043eb0543f6..5ab49a798164 100644 --- a/drivers/staging/comedi/drivers/ni_tio.c +++ b/drivers/staging/comedi/drivers/ni_tio.c @@ -207,7 +207,8 @@ static int ni_tio_clock_period_ps(const struct ni_gpct *counter, * clock period is specified by user with prescaling * already taken into account. */ - return counter->clock_period_ps; + *period_ps = counter->clock_period_ps; + return 0; } switch (generic_clock_source & NI_GPCT_PRESCALE_MODE_CLOCK_SRC_MASK) { -- cgit From d9966f1de990577b49903061cfcea2d1e85353fb Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 1 Nov 2016 11:55:02 +0100 Subject: staging: greybus: arche-platform: fix device reference leak Make sure to drop the device reference taken by of_find_device_by_node() before returning from arche_platform_change_state(). Note that this code is expected to be removed, but let's fix up the leak nonetheless. Fixes: 886aba558b9e ("greybus: arche-platform: Export fn to allow...") Signed-off-by: Johan Hovold Acked-by: Viresh Kumar Reviewed-by: Vaibhav Hiremath Signed-off-by: Greg Kroah-Hartman --- drivers/staging/greybus/arche-platform.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/greybus/arche-platform.c b/drivers/staging/greybus/arche-platform.c index 34307ac3f255..d33d6fe078ad 100644 --- a/drivers/staging/greybus/arche-platform.c +++ b/drivers/staging/greybus/arche-platform.c @@ -186,6 +186,7 @@ int arche_platform_change_state(enum arche_platform_state state, exit: spin_unlock_irqrestore(&arche_pdata->wake_lock, flags); mutex_unlock(&arche_pdata->platform_state_mutex); + put_device(&pdev->dev); of_node_put(np); return ret; } -- cgit From d8f8a74d5fece355d2234e1731231d1aebc66b38 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Thu, 27 Oct 2016 17:22:08 +0300 Subject: drivers: staging: nvec: remove bogus reset command for PS/2 interface This command was sent behind serio's back and the answer to it was confusing atkbd probe function which lead to the elantech touchpad getting detected as a keyboard. To prevent this from happening just let every party do its part of the job. Signed-off-by: Paul Fertser Acked-by: Marc Dietrich Cc: stable # 3.4+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/nvec/nvec_ps2.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c index a324322ee0ad..d63c4efa8074 100644 --- a/drivers/staging/nvec/nvec_ps2.c +++ b/drivers/staging/nvec/nvec_ps2.c @@ -106,7 +106,6 @@ static int nvec_mouse_probe(struct platform_device *pdev) { struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent); struct serio *ser_dev; - char mouse_reset[] = { NVEC_PS2, SEND_COMMAND, PSMOUSE_RST, 3 }; ser_dev = devm_kzalloc(&pdev->dev, sizeof(struct serio), GFP_KERNEL); if (!ser_dev) @@ -127,9 +126,6 @@ static int nvec_mouse_probe(struct platform_device *pdev) serio_register_port(ser_dev); - /* mouse reset */ - nvec_write_async(nvec, mouse_reset, sizeof(mouse_reset)); - return 0; } -- cgit From 17c1c9ba15b238ef79b51cf40d855c05b58d5934 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Thu, 27 Oct 2016 17:22:09 +0300 Subject: Revert "staging: nvec: ps2: change serio type to passthrough" This reverts commit 36b30d6138f4677514aca35ab76c20c1604baaad. This is necessary to detect paz00 (ac100) touchpad properly as one speaking ETPS/2 protocol. Without it X.org's synaptics driver doesn't work as the touchpad is detected as an ImPS/2 mouse instead. Commit ec6184b1c717b8768122e25fe6d312f609cc1bb4 changed the way auto-detection is performed on ports marked as pass through and made the issue apparent. A pass through port is an additional PS/2 port used to connect a slave device to a master device that is using PS/2 to communicate with the host (so slave's PS/2 communication is tunneled over master's PS/2 link). "Synaptics PS/2 TouchPad Interfacing Guide" describes such a setup (PS/2 PASS-THROUGH OPTION section). Since paz00's embedded controller is not connected to a PS/2 port itself, the PS/2 interface it exposes is not a pass-through one. Signed-off-by: Paul Fertser Acked-by: Marc Dietrich Fixes: 36b30d6138f4 ("staging: nvec: ps2: change serio type to passthrough") Cc: stable # 3.4+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/nvec/nvec_ps2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c index d63c4efa8074..910e87b761e7 100644 --- a/drivers/staging/nvec/nvec_ps2.c +++ b/drivers/staging/nvec/nvec_ps2.c @@ -111,7 +111,7 @@ static int nvec_mouse_probe(struct platform_device *pdev) if (!ser_dev) return -ENOMEM; - ser_dev->id.type = SERIO_PS_PSTHRU; + ser_dev->id.type = SERIO_8042; ser_dev->write = ps2_sendcommand; ser_dev->start = ps2_startstreaming; ser_dev->stop = ps2_stopstreaming; -- cgit From 68fae2f3df455f53d0dfe33483a49020b3b758f3 Mon Sep 17 00:00:00 2001 From: Marc Dietrich Date: Tue, 1 Nov 2016 13:59:40 +0100 Subject: staging: nvec: remove managed resource from PS2 driver This basicly reverts commit e534f3e9 (staging:nvec: Introduce the use of the managed version of kzalloc). Serio struct should never by managed because it is refcounted. Doing so will lead to a double free oops on module remove. Signed-off-by: Marc Dietrich Fixes: e534f3e9429f ("staging:nvec: Introduce the use of the managed version of kzalloc") Cc: stable # 3.15+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/nvec/nvec_ps2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c index 910e87b761e7..499952c8ef39 100644 --- a/drivers/staging/nvec/nvec_ps2.c +++ b/drivers/staging/nvec/nvec_ps2.c @@ -107,7 +107,7 @@ static int nvec_mouse_probe(struct platform_device *pdev) struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent); struct serio *ser_dev; - ser_dev = devm_kzalloc(&pdev->dev, sizeof(struct serio), GFP_KERNEL); + ser_dev = kzalloc(sizeof(struct serio), GFP_KERNEL); if (!ser_dev) return -ENOMEM; -- cgit From e8a6123e9ead1b0d40349809e51de9341312fe08 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 23 Oct 2016 13:55:34 +0200 Subject: x86/platform/intel-mid: Retrofit pci_platform_pm_ops ->get_state hook Commit cc7cc02bada8 ("PCI: Query platform firmware for device power state") augmented struct pci_platform_pm_ops with a ->get_state hook and implemented it for acpi_pci_platform_pm, the only pci_platform_pm_ops existing till v4.7. However v4.8 introduced another pci_platform_pm_ops for Intel Mobile Internet Devices with commit 5823d0893ec2 ("x86/platform/intel-mid: Add Power Management Unit driver"). It is missing the ->get_state hook, which is fatal since pci_set_platform_pm() enforces its presence. Andy Shevchenko reports that without the present commit, such a device "crashes without even a character printed out on serial console and reboots (since watchdog)". Retrofit mid_pci_platform_pm with the missing callback to fix the breakage. Acked-and-tested-by: Andy Shevchenko Fixes: cc7cc02bada8 ("PCI: Query platform firmware for device power state") Signed-off-by: Lukas Wunner Acked-by: Bjorn Helgaas Cc: linux-pci@vger.kernel.org Cc: Andy Shevchenko Link: http://lkml.kernel.org/r/7c1567d4c49303a4aada94ba16275cbf56b8976b.1477221514.git.lukas@wunner.de Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/intel-mid.h | 1 + arch/x86/platform/intel-mid/pwr.c | 19 +++++++++++++++++++ drivers/pci/pci-mid.c | 6 ++++++ 3 files changed, 26 insertions(+) diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h index 5b6753d1f7f4..49da9f497b90 100644 --- a/arch/x86/include/asm/intel-mid.h +++ b/arch/x86/include/asm/intel-mid.h @@ -17,6 +17,7 @@ extern int intel_mid_pci_init(void); extern int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state); +extern pci_power_t intel_mid_pci_get_power_state(struct pci_dev *pdev); extern void intel_mid_pwr_power_off(void); diff --git a/arch/x86/platform/intel-mid/pwr.c b/arch/x86/platform/intel-mid/pwr.c index 5d3b45ad1c03..67375dda451c 100644 --- a/arch/x86/platform/intel-mid/pwr.c +++ b/arch/x86/platform/intel-mid/pwr.c @@ -272,6 +272,25 @@ int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state) } EXPORT_SYMBOL_GPL(intel_mid_pci_set_power_state); +pci_power_t intel_mid_pci_get_power_state(struct pci_dev *pdev) +{ + struct mid_pwr *pwr = midpwr; + int id, reg, bit; + u32 power; + + if (!pwr || !pwr->available) + return PCI_UNKNOWN; + + id = intel_mid_pwr_get_lss_id(pdev); + if (id < 0) + return PCI_UNKNOWN; + + reg = (id * LSS_PWS_BITS) / 32; + bit = (id * LSS_PWS_BITS) % 32; + power = mid_pwr_get_state(pwr, reg); + return (__force pci_power_t)((power >> bit) & 3); +} + void intel_mid_pwr_power_off(void) { struct mid_pwr *pwr = midpwr; diff --git a/drivers/pci/pci-mid.c b/drivers/pci/pci-mid.c index 55f453de562e..c7f3408e3148 100644 --- a/drivers/pci/pci-mid.c +++ b/drivers/pci/pci-mid.c @@ -29,6 +29,11 @@ static int mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state) return intel_mid_pci_set_power_state(pdev, state); } +static pci_power_t mid_pci_get_power_state(struct pci_dev *pdev) +{ + return intel_mid_pci_get_power_state(pdev); +} + static pci_power_t mid_pci_choose_state(struct pci_dev *pdev) { return PCI_D3hot; @@ -52,6 +57,7 @@ static bool mid_pci_need_resume(struct pci_dev *dev) static struct pci_platform_pm_ops mid_pci_platform_pm = { .is_manageable = mid_pci_power_manageable, .set_state = mid_pci_set_power_state, + .get_state = mid_pci_get_power_state, .choose_state = mid_pci_choose_state, .sleep_wake = mid_pci_sleep_wake, .run_wake = mid_pci_run_wake, -- cgit From 6ebebeab5185f50d55c6a24d0abe47e5dac1b191 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 2 Nov 2016 15:49:08 +0200 Subject: mmc: sdhci: Fix CMD line reset interfering with ongoing data transfer CMD line reset during an ongoing data transfer can cause the data transfer to hang. Fix by delaying the reset until the data transfer is finished. Signed-off-by: Adrian Hunter Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 71654b90227f..fd0f24cddad4 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2286,10 +2286,8 @@ static bool sdhci_request_done(struct sdhci_host *host) for (i = 0; i < SDHCI_MAX_MRQS; i++) { mrq = host->mrqs_done[i]; - if (mrq) { - host->mrqs_done[i] = NULL; + if (mrq) break; - } } if (!mrq) { @@ -2320,6 +2318,17 @@ static bool sdhci_request_done(struct sdhci_host *host) * upon error conditions. */ if (sdhci_needs_reset(host, mrq)) { + /* + * Do not finish until command and data lines are available for + * reset. Note there can only be one other mrq, so it cannot + * also be in mrqs_done, otherwise host->cmd and host->data_cmd + * would both be null. + */ + if (host->cmd || host->data_cmd) { + spin_unlock_irqrestore(&host->lock, flags); + return true; + } + /* Some controllers need this kick or reset won't work here */ if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) /* This is to force an update */ @@ -2327,10 +2336,8 @@ static bool sdhci_request_done(struct sdhci_host *host) /* Spec says we should do both at the same time, but Ricoh controllers do not like that. */ - if (!host->cmd) - sdhci_do_reset(host, SDHCI_RESET_CMD); - if (!host->data_cmd) - sdhci_do_reset(host, SDHCI_RESET_DATA); + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); host->pending_reset = false; } @@ -2338,6 +2345,8 @@ static bool sdhci_request_done(struct sdhci_host *host) if (!sdhci_has_requests(host)) sdhci_led_deactivate(host); + host->mrqs_done[i] = NULL; + mmiowb(); spin_unlock_irqrestore(&host->lock, flags); -- cgit From 69b962a65a547690a356f9f76bc4f53db538ac49 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 2 Nov 2016 15:49:09 +0200 Subject: mmc: sdhci: Fix unexpected data interrupt handling In the busy response case (i.e. !host->data), an unexpected data interrupt would result in clearing the data command as though it had completed but without informing the upper layers and thus resulting in a hang. Fix by only clearing the data command for data interrupts that are expected. Signed-off-by: Adrian Hunter Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index fd0f24cddad4..0dd3c31e23bb 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2521,9 +2521,6 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) if (!host->data) { struct mmc_command *data_cmd = host->data_cmd; - if (data_cmd) - host->data_cmd = NULL; - /* * The "data complete" interrupt is also used to * indicate that a busy state has ended. See comment @@ -2531,11 +2528,13 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) */ if (data_cmd && (data_cmd->flags & MMC_RSP_BUSY)) { if (intmask & SDHCI_INT_DATA_TIMEOUT) { + host->data_cmd = NULL; data_cmd->error = -ETIMEDOUT; sdhci_finish_mrq(host, data_cmd->mrq); return; } if (intmask & SDHCI_INT_DATA_END) { + host->data_cmd = NULL; /* * Some cards handle busy-end interrupt * before the command completed, so make -- cgit From fe5fb2e3b58f866f82a80fe7c7866ea6d0b306b9 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 2 Nov 2016 15:49:10 +0200 Subject: mmc: sdhci: Reset cmd and data circuits after tuning failure To prevent subsequent commands failing, ensure the cmd and data circuits are reset after a tuning timeout. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 0dd3c31e23bb..542aabc48032 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2086,6 +2086,10 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) if (!host->tuning_done) { pr_info(DRIVER_NAME ": Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock\n"); + + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); ctrl &= ~SDHCI_CTRL_TUNED_CLK; ctrl &= ~SDHCI_CTRL_EXEC_TUNING; -- cgit From 086b0ddbeff5317026417c29752129d28a216c66 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 2 Nov 2016 15:49:11 +0200 Subject: mmc: sdhci: Fix missing enhanced strobe setting during runtime resume Restore enhanced strobe setting during runtime resume. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 542aabc48032..42ef3ebb1d8c 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2924,6 +2924,10 @@ int sdhci_runtime_resume_host(struct sdhci_host *host) spin_unlock_irqrestore(&host->lock, flags); } + if ((mmc->caps2 & MMC_CAP2_HS400_ES) && + mmc->ops->hs400_enhanced_strobe) + mmc->ops->hs400_enhanced_strobe(mmc, &mmc->ios); + spin_lock_irqsave(&host->lock, flags); host->runtime_suspended = false; -- cgit From be55f7bee39ed019713c5a1e930214e6d744fe0f Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 4 Nov 2016 13:41:05 +0200 Subject: mmc: mmc_test: Fix "Commands during non-blocking write" tests mmc_test_check_result_async() requires that struct mmc_async_req is contained within struct mmc_test_async_req. Fix the "Commands during non-blocking write" tests so that is the case. Fixes: 4bbb9aac9a9a ("mmc: mmc_test: Add tests for sending commands during transfer") Signed-off-by: Adrian Hunter Tested-by: Ritesh Harjani Signed-off-by: Ulf Hansson --- drivers/mmc/card/mmc_test.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index 5a8dc5a76e0d..3678220964fe 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -2347,7 +2347,7 @@ static int mmc_test_ongoing_transfer(struct mmc_test_card *test, struct mmc_test_req *rq = mmc_test_req_alloc(); struct mmc_host *host = test->card->host; struct mmc_test_area *t = &test->area; - struct mmc_async_req areq; + struct mmc_test_async_req test_areq = { .test = test }; struct mmc_request *mrq; unsigned long timeout; bool expired = false; @@ -2363,8 +2363,8 @@ static int mmc_test_ongoing_transfer(struct mmc_test_card *test, mrq->sbc = &rq->sbc; mrq->cap_cmd_during_tfr = true; - areq.mrq = mrq; - areq.err_check = mmc_test_check_result_async; + test_areq.areq.mrq = mrq; + test_areq.areq.err_check = mmc_test_check_result_async; mmc_test_prepare_mrq(test, mrq, t->sg, t->sg_len, dev_addr, t->blocks, 512, write); @@ -2378,7 +2378,7 @@ static int mmc_test_ongoing_transfer(struct mmc_test_card *test, /* Start ongoing data request */ if (use_areq) { - mmc_start_req(host, &areq, &ret); + mmc_start_req(host, &test_areq.areq, &ret); if (ret) goto out_free; } else { -- cgit From fe1b5700c70faac6e027982d59667bc6020de5a8 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Fri, 4 Nov 2016 18:32:33 +0100 Subject: mmc: mmc: Use 500ms as the default generic CMD6 timeout In the eMMC 4.51 version of the spec, an EXT_CSD field called GENERIC_CMD6_TIME[248] was added. This allows cards to specify the maximum time it may need to move out from its busy state, when a CMD6 command has been sent. In cases when the card is compliant to versions < 4.51 of the eMMC spec, obviously the core needs to use a fall-back value for this timeout, which currently is set to 10 minutes. This value is completely in the wrong range and importantly in some cases it causes a card initialization to take more than 10 minute to complete. Earlier this scenario was avoided as the mmc core used CMD13 to poll the card, to find out when it stopped signaling busy. Commit 08573eaf1a70 ("mmc: mmc: do not use CMD13 to get status after speed mode switch") changed this behavior. Instead of reverting that commit, which would cause other issues, let's instead start by picking a simple solution for the problem, by using a 500ms default generic CMD6 timeout. The reason for using exactly 500ms, comes from observations that shows it's quite common for cards to specify 250ms. 500ms is two times that value so likely it should be enough for most cards. Cc: # v4.8+ Fixes: 08573eaf1a70 ("mmc: mmc: do not use CMD13 to get status after speed mode switch") Signed-off-by: Ulf Hansson Tested-by: Stephen Boyd Tested-by: Linus Walleij --- drivers/mmc/core/mmc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 39fc5b2b96c5..df19777068a6 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -26,6 +26,8 @@ #include "mmc_ops.h" #include "sd_ops.h" +#define DEFAULT_CMD6_TIMEOUT_MS 500 + static const unsigned int tran_exp[] = { 10000, 100000, 1000000, 10000000, 0, 0, 0, 0 @@ -571,6 +573,7 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd) card->erased_byte = 0x0; /* eMMC v4.5 or later */ + card->ext_csd.generic_cmd6_time = DEFAULT_CMD6_TIMEOUT_MS; if (card->ext_csd.rev >= 6) { card->ext_csd.feature_support |= MMC_DISCARD_FEATURE; -- cgit From f91346e8b5f46aaf12f1df26e87140584ffd1b3f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 5 Nov 2016 17:45:07 -0200 Subject: mmc: mxs: Initialize the spinlock prior to using it An interrupt may occur right after devm_request_irq() is called and prior to the spinlock initialization, leading to a kernel oops, as the interrupt handler uses the spinlock. In order to prevent this problem, move the spinlock initialization prior to requesting the interrupts. Fixes: e4243f13d10e (mmc: mxs-mmc: add mmc host driver for i.MX23/28) Signed-off-by: Fabio Estevam Reviewed-by: Marek Vasut Signed-off-by: Ulf Hansson --- drivers/mmc/host/mxs-mmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index d839147e591d..44ecebd1ea8c 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -661,13 +661,13 @@ static int mxs_mmc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, mmc); + spin_lock_init(&host->lock); + ret = devm_request_irq(&pdev->dev, irq_err, mxs_mmc_irq_handler, 0, dev_name(&pdev->dev), host); if (ret) goto out_free_dma; - spin_lock_init(&host->lock); - ret = mmc_add_host(mmc); if (ret) goto out_free_dma; -- cgit From dc0336214eb07ee9de2a41dd4c81c744ffa419ac Mon Sep 17 00:00:00 2001 From: Mike Marshall Date: Fri, 4 Nov 2016 16:32:25 -0400 Subject: orangefs: clean up debugfs We recently refactored the Orangefs debugfs code. The refactor seemed to trigger dan.carpenter@oracle.com's static tester to find a possible double-free in the code. While designing the fix we saw a condition under which the buffer being freed could also be overflowed. We also realized how to rebuild the related debugfs file's "contents" (a string) without deleting and re-creating the file. This fix should eliminate the possible double-free, the potential overflow and improve code readability. Signed-off-by: Mike Marshall Signed-off-by: Martin Brandenburg --- fs/orangefs/orangefs-debugfs.c | 147 ++++++++++++++++++----------------------- fs/orangefs/orangefs-mod.c | 6 +- 2 files changed, 68 insertions(+), 85 deletions(-) diff --git a/fs/orangefs/orangefs-debugfs.c b/fs/orangefs/orangefs-debugfs.c index eb09aa026723..d484068ca716 100644 --- a/fs/orangefs/orangefs-debugfs.c +++ b/fs/orangefs/orangefs-debugfs.c @@ -141,6 +141,9 @@ static struct client_debug_mask client_debug_mask; */ static DEFINE_MUTEX(orangefs_debug_lock); +/* Used to protect data in ORANGEFS_KMOD_DEBUG_HELP_FILE */ +static DEFINE_MUTEX(orangefs_help_file_lock); + /* * initialize kmod debug operations, create orangefs debugfs dir and * ORANGEFS_KMOD_DEBUG_HELP_FILE. @@ -289,6 +292,8 @@ static void *help_start(struct seq_file *m, loff_t *pos) gossip_debug(GOSSIP_DEBUGFS_DEBUG, "help_start: start\n"); + mutex_lock(&orangefs_help_file_lock); + if (*pos == 0) payload = m->private; @@ -305,6 +310,7 @@ static void *help_next(struct seq_file *m, void *v, loff_t *pos) static void help_stop(struct seq_file *m, void *p) { gossip_debug(GOSSIP_DEBUGFS_DEBUG, "help_stop: start\n"); + mutex_unlock(&orangefs_help_file_lock); } static int help_show(struct seq_file *m, void *v) @@ -610,32 +616,54 @@ out: * /sys/kernel/debug/orangefs/debug-help can be catted to * see all the available kernel and client debug keywords. * - * When the kernel boots, we have no idea what keywords the + * When orangefs.ko initializes, we have no idea what keywords the * client supports, nor their associated masks. * - * We pass through this function once at boot and stamp a + * We pass through this function once at module-load and stamp a * boilerplate "we don't know" message for the client in the * debug-help file. We pass through here again when the client * starts and then we can fill out the debug-help file fully. * * The client might be restarted any number of times between - * reboots, we only build the debug-help file the first time. + * module reloads, we only build the debug-help file the first time. */ int orangefs_prepare_debugfs_help_string(int at_boot) { - int rc = -EINVAL; - int i; - int byte_count = 0; char *client_title = "Client Debug Keywords:\n"; char *kernel_title = "Kernel Debug Keywords:\n"; + size_t string_size = DEBUG_HELP_STRING_SIZE; + size_t result_size; + size_t i; + char *new; + int rc = -EINVAL; gossip_debug(GOSSIP_UTILS_DEBUG, "%s: start\n", __func__); - if (at_boot) { - byte_count += strlen(HELP_STRING_UNINITIALIZED); + if (at_boot) client_title = HELP_STRING_UNINITIALIZED; - } else { - /* + + /* build a new debug_help_string. */ + new = kzalloc(DEBUG_HELP_STRING_SIZE, GFP_KERNEL); + if (!new) { + rc = -ENOMEM; + goto out; + } + + /* + * strlcat(dst, src, size) will append at most + * "size - strlen(dst) - 1" bytes of src onto dst, + * null terminating the result, and return the total + * length of the string it tried to create. + * + * We'll just plow through here building our new debug + * help string and let strlcat take care of assuring that + * dst doesn't overflow. + */ + strlcat(new, client_title, string_size); + + if (!at_boot) { + + /* * fill the client keyword/mask array and remember * how many elements there were. */ @@ -644,64 +672,40 @@ int orangefs_prepare_debugfs_help_string(int at_boot) if (cdm_element_count <= 0) goto out; - /* Count the bytes destined for debug_help_string. */ - byte_count += strlen(client_title); - for (i = 0; i < cdm_element_count; i++) { - byte_count += strlen(cdm_array[i].keyword + 2); - if (byte_count >= DEBUG_HELP_STRING_SIZE) { - pr_info("%s: overflow 1!\n", __func__); - goto out; - } + strlcat(new, "\t", string_size); + strlcat(new, cdm_array[i].keyword, string_size); + strlcat(new, "\n", string_size); } - - gossip_debug(GOSSIP_UTILS_DEBUG, - "%s: cdm_element_count:%d:\n", - __func__, - cdm_element_count); } - byte_count += strlen(kernel_title); + strlcat(new, "\n", string_size); + strlcat(new, kernel_title, string_size); + for (i = 0; i < num_kmod_keyword_mask_map; i++) { - byte_count += - strlen(s_kmod_keyword_mask_map[i].keyword + 2); - if (byte_count >= DEBUG_HELP_STRING_SIZE) { - pr_info("%s: overflow 2!\n", __func__); - goto out; - } + strlcat(new, "\t", string_size); + strlcat(new, s_kmod_keyword_mask_map[i].keyword, string_size); + result_size = strlcat(new, "\n", string_size); } - /* build debug_help_string. */ - debug_help_string = kzalloc(DEBUG_HELP_STRING_SIZE, GFP_KERNEL); - if (!debug_help_string) { - rc = -ENOMEM; + /* See if we tried to put too many bytes into "new"... */ + if (result_size >= string_size) { + kfree(new); goto out; } - strcat(debug_help_string, client_title); - - if (!at_boot) { - for (i = 0; i < cdm_element_count; i++) { - strcat(debug_help_string, "\t"); - strcat(debug_help_string, cdm_array[i].keyword); - strcat(debug_help_string, "\n"); - } - } - - strcat(debug_help_string, "\n"); - strcat(debug_help_string, kernel_title); - - for (i = 0; i < num_kmod_keyword_mask_map; i++) { - strcat(debug_help_string, "\t"); - strcat(debug_help_string, s_kmod_keyword_mask_map[i].keyword); - strcat(debug_help_string, "\n"); + if (at_boot) { + debug_help_string = new; + } else { + mutex_lock(&orangefs_help_file_lock); + memset(debug_help_string, 0, DEBUG_HELP_STRING_SIZE); + strlcat(debug_help_string, new, string_size); + mutex_unlock(&orangefs_help_file_lock); } rc = 0; -out: - - return rc; +out: return rc; } @@ -959,8 +963,12 @@ int orangefs_debugfs_new_client_string(void __user *arg) ret = copy_from_user(&client_debug_array_string, (void __user *)arg, ORANGEFS_MAX_DEBUG_STRING_LEN); - if (ret != 0) + + if (ret != 0) { + pr_info("%s: CLIENT_STRING: copy_from_user failed\n", + __func__); return -EIO; + } /* * The real client-core makes an effort to ensure @@ -975,45 +983,18 @@ int orangefs_debugfs_new_client_string(void __user *arg) client_debug_array_string[ORANGEFS_MAX_DEBUG_STRING_LEN - 1] = '\0'; - if (ret != 0) { - pr_info("%s: CLIENT_STRING: copy_from_user failed\n", - __func__); - return -EIO; - } - pr_info("%s: client debug array string has been received.\n", __func__); if (!help_string_initialized) { - /* Free the "we don't know yet" default string... */ - kfree(debug_help_string); - - /* build a proper debug help string */ + /* Build a proper debug help string. */ if (orangefs_prepare_debugfs_help_string(0)) { gossip_err("%s: no debug help string \n", __func__); return -EIO; } - /* Replace the boilerplate boot-time debug-help file. */ - debugfs_remove(help_file_dentry); - - help_file_dentry = - debugfs_create_file( - ORANGEFS_KMOD_DEBUG_HELP_FILE, - 0444, - debug_dir, - debug_help_string, - &debug_help_fops); - - if (!help_file_dentry) { - gossip_err("%s: debugfs_create_file failed for" - " :%s:!\n", - __func__, - ORANGEFS_KMOD_DEBUG_HELP_FILE); - return -EIO; - } } debug_mask_to_string(&client_debug_mask, 1); diff --git a/fs/orangefs/orangefs-mod.c b/fs/orangefs/orangefs-mod.c index 2e5b03065f34..4113eb0495bf 100644 --- a/fs/orangefs/orangefs-mod.c +++ b/fs/orangefs/orangefs-mod.c @@ -124,7 +124,7 @@ static int __init orangefs_init(void) * unknown at boot time. * * orangefs_prepare_debugfs_help_string will be used again - * later to rebuild the debug-help file after the client starts + * later to rebuild the debug-help-string after the client starts * and passes along the needed info. The argument signifies * which time orangefs_prepare_debugfs_help_string is being * called. @@ -152,7 +152,9 @@ static int __init orangefs_init(void) ret = register_filesystem(&orangefs_fs_type); if (ret == 0) { - pr_info("orangefs: module version %s loaded\n", ORANGEFS_VERSION); + pr_info("%s: module version %s loaded\n", + __func__, + ORANGEFS_VERSION); ret = 0; goto out; } -- cgit From 8d83bc22b259e5526625b6d298f637786c71129f Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 11 Oct 2016 20:52:46 +0300 Subject: drm/i915: Respect alternate_ddc_pin for all DDI ports MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The VBT provides the platform a way to mix and match the DDI ports vs. GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose has no standard GMBUS pin assignment. However, there are machines out there that use a non-standard mapping for the other ports as well. Let's start trusting the VBT on this one for all ports on DDI platforms. I've structured the code such that other platforms could easily start using this as well, by simply filling in the ddi_port_info. IIRC there may be CHV system that might actually need this. v2: Include a commit message, include a debug message during init Cc: stable@vger.kernel.org Cc: Maarten Maathuis Tested-by: Maarten Maathuis Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jim Bride (cherry picked from commit e4ab73a13291fc844c9e24d5c347bd95818544d2) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_hdmi.c | 84 ++++++++++++++++++++++----------------- 1 file changed, 48 insertions(+), 36 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index f40a35f2913a..13c306173f27 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -1799,6 +1799,50 @@ intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *c intel_hdmi->aspect_ratio = HDMI_PICTURE_ASPECT_NONE; } +static u8 intel_hdmi_ddc_pin(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + u8 ddc_pin; + + if (info->alternate_ddc_pin) { + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (VBT)\n", + info->alternate_ddc_pin, port_name(port)); + return info->alternate_ddc_pin; + } + + switch (port) { + case PORT_B: + if (IS_BROXTON(dev_priv)) + ddc_pin = GMBUS_PIN_1_BXT; + else + ddc_pin = GMBUS_PIN_DPB; + break; + case PORT_C: + if (IS_BROXTON(dev_priv)) + ddc_pin = GMBUS_PIN_2_BXT; + else + ddc_pin = GMBUS_PIN_DPC; + break; + case PORT_D: + if (IS_CHERRYVIEW(dev_priv)) + ddc_pin = GMBUS_PIN_DPD_CHV; + else + ddc_pin = GMBUS_PIN_DPD; + break; + default: + MISSING_CASE(port); + ddc_pin = GMBUS_PIN_DPB; + break; + } + + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (platform default)\n", + ddc_pin, port_name(port)); + + return ddc_pin; +} + void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, struct intel_connector *intel_connector) { @@ -1808,7 +1852,6 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, struct drm_device *dev = intel_encoder->base.dev; struct drm_i915_private *dev_priv = to_i915(dev); enum port port = intel_dig_port->port; - uint8_t alternate_ddc_pin; DRM_DEBUG_KMS("Adding HDMI connector on port %c\n", port_name(port)); @@ -1826,12 +1869,10 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, connector->doublescan_allowed = 0; connector->stereo_allowed = 1; + intel_hdmi->ddc_bus = intel_hdmi_ddc_pin(dev_priv, port); + switch (port) { case PORT_B: - if (IS_BROXTON(dev_priv)) - intel_hdmi->ddc_bus = GMBUS_PIN_1_BXT; - else - intel_hdmi->ddc_bus = GMBUS_PIN_DPB; /* * On BXT A0/A1, sw needs to activate DDIA HPD logic and * interrupts to check the external panel connection. @@ -1842,46 +1883,17 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, intel_encoder->hpd_pin = HPD_PORT_B; break; case PORT_C: - if (IS_BROXTON(dev_priv)) - intel_hdmi->ddc_bus = GMBUS_PIN_2_BXT; - else - intel_hdmi->ddc_bus = GMBUS_PIN_DPC; intel_encoder->hpd_pin = HPD_PORT_C; break; case PORT_D: - if (WARN_ON(IS_BROXTON(dev_priv))) - intel_hdmi->ddc_bus = GMBUS_PIN_DISABLED; - else if (IS_CHERRYVIEW(dev_priv)) - intel_hdmi->ddc_bus = GMBUS_PIN_DPD_CHV; - else - intel_hdmi->ddc_bus = GMBUS_PIN_DPD; intel_encoder->hpd_pin = HPD_PORT_D; break; case PORT_E: - /* On SKL PORT E doesn't have seperate GMBUS pin - * We rely on VBT to set a proper alternate GMBUS pin. */ - alternate_ddc_pin = - dev_priv->vbt.ddi_port_info[PORT_E].alternate_ddc_pin; - switch (alternate_ddc_pin) { - case DDC_PIN_B: - intel_hdmi->ddc_bus = GMBUS_PIN_DPB; - break; - case DDC_PIN_C: - intel_hdmi->ddc_bus = GMBUS_PIN_DPC; - break; - case DDC_PIN_D: - intel_hdmi->ddc_bus = GMBUS_PIN_DPD; - break; - default: - MISSING_CASE(alternate_ddc_pin); - } intel_encoder->hpd_pin = HPD_PORT_E; break; - case PORT_A: - intel_encoder->hpd_pin = HPD_PORT_A; - /* Internal port only for eDP. */ default: - BUG(); + MISSING_CASE(port); + return; } if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) { -- cgit From cdffe3e252bb55e82ee89bbdfe8d2f18b6157c28 Mon Sep 17 00:00:00 2001 From: Lyude Date: Wed, 26 Oct 2016 12:36:09 -0400 Subject: drm/i915/vlv: Prevent enabling hpd polling in late suspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit One of the CI machines began to run into issues with the hpd poller suddenly waking up in the midst of the late suspend phase. It looks like this is getting caused by the fact we now deinitialize power wells in late suspend, which means that intel_hpd_poll_init() gets called in late suspend causing polling to get re-enabled. So, when deinitializing power wells on valleyview we now refrain from enabling polling in the midst of suspend. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98040 Fixes: 19625e85c6ec ("drm/i915: Enable polling when we don't have hpd") Signed-off-by: Lyude Cc: Ville Syrjälä Cc: Jani Saarinen Cc: Petry Latvala Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1477499769-1966-1-git-send-email-lyude@redhat.com (cherry picked from commit b64b540931483cca3200d98756bed6ad0e01d75c) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_runtime_pm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c index 6c11168facd6..a38c2fefe85a 100644 --- a/drivers/gpu/drm/i915/intel_runtime_pm.c +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c @@ -1139,7 +1139,9 @@ static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv) intel_power_sequencer_reset(dev_priv); - intel_hpd_poll_init(dev_priv); + /* Prevent us from re-enabling polling on accident in late suspend */ + if (!dev_priv->drm.dev->power.is_suspended) + intel_hpd_poll_init(dev_priv); } static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv, -- cgit From fbb21c5202ae7f1e71e832b1af59fb047da6383e Mon Sep 17 00:00:00 2001 From: Dhinakaran Pandiyan Date: Tue, 1 Nov 2016 11:47:59 -0700 Subject: drm/i915/dp: BDW cdclk fix for DP audio MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. From BSpec: "Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)] Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may be audio corruption or screen corruption." Since, some DP configurations (e.g., MST) use port width x4 and HBR2 link rate, let's increase the cdclk to >= 432 MHz to enable audio for those cases. v4: Changed commit message v3: Combine BDW pixel rate adjustments into a function (Jani) v2: Restrict fix to BDW Retain the set cdclk across modesets (Ville) Cc: stable@vger.kernel.org Signed-off-by: Dhinakaran Pandiyan Reviewed-by: Ville Syrjälä Reviewed-by: Jani Nikula Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1478026080-2925-1-git-send-email-dhinakaran.pandiyan@intel.com (cherry picked from commit b30ce9e0552aa017ac6f2243f3c2d8e36fe52e69) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 0ad1879bfd9d..4f57f8c6074e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10243,6 +10243,27 @@ static void bxt_modeset_commit_cdclk(struct drm_atomic_state *old_state) bxt_set_cdclk(to_i915(dev), req_cdclk); } +static int bdw_adjust_min_pipe_pixel_rate(struct intel_crtc_state *crtc_state, + int pixel_rate) +{ + /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ + if (crtc_state->ips_enabled) + pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); + + /* BSpec says "Do not use DisplayPort with CDCLK less than + * 432 MHz, audio enabled, port width x4, and link rate + * HBR2 (5.4 GHz), or else there may be audio corruption or + * screen corruption." + */ + if (intel_crtc_has_dp_encoder(crtc_state) && + crtc_state->has_audio && + crtc_state->port_clock >= 540000 && + crtc_state->lane_count == 4) + pixel_rate = max(432000, pixel_rate); + + return pixel_rate; +} + /* compute the max rate for new configuration */ static int ilk_max_pixel_rate(struct drm_atomic_state *state) { @@ -10268,9 +10289,9 @@ static int ilk_max_pixel_rate(struct drm_atomic_state *state) pixel_rate = ilk_pipe_pixel_rate(crtc_state); - /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ - if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled) - pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); + if (IS_BROADWELL(dev_priv)) + pixel_rate = bdw_adjust_min_pipe_pixel_rate(crtc_state, + pixel_rate); intel_state->min_pixclk[i] = pixel_rate; } -- cgit From 61e0c5438866d0e737937fc35d752538960e1e9f Mon Sep 17 00:00:00 2001 From: Dhinakaran Pandiyan Date: Wed, 2 Nov 2016 13:13:21 -0700 Subject: drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. Let's apply this work around to GEN9 platforms too, as it fixes the same issue. v2: Move drm_device to drm_i915_private conversion Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907 Cc: stable@vger.kernel.org Cc: Libin Yang Signed-off-by: Dhinakaran Pandiyan Reviewed-by: Jani Nikula Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com (cherry picked from commit 9c7540241885838cfc7fa58c4a8bd75be0303ed1) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 4f57f8c6074e..81c11499bcf0 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10246,8 +10246,10 @@ static void bxt_modeset_commit_cdclk(struct drm_atomic_state *old_state) static int bdw_adjust_min_pipe_pixel_rate(struct intel_crtc_state *crtc_state, int pixel_rate) { + struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev); + /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ - if (crtc_state->ips_enabled) + if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled) pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); /* BSpec says "Do not use DisplayPort with CDCLK less than @@ -10289,7 +10291,7 @@ static int ilk_max_pixel_rate(struct drm_atomic_state *state) pixel_rate = ilk_pipe_pixel_rate(crtc_state); - if (IS_BROADWELL(dev_priv)) + if (IS_BROADWELL(dev_priv) || IS_GEN9(dev_priv)) pixel_rate = bdw_adjust_min_pipe_pixel_rate(crtc_state, pixel_rate); -- cgit From c4b8c570447a7bc171829532269878345b3ea9d0 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 7 Nov 2016 10:54:43 +0000 Subject: drm/i915: Round tile chunks up for constructing partial VMAs When we split a large object up into chunks for GTT faulting (because we can't fit the whole object into the aperture) we have to align our cuts with the fence registers. Each partial VMA must cover a complete set of tile rows or the offset into each partial VMA is not aligned with the whole image. Currently we enforce a minimum size on each partial VMA, but this minimum size itself was not aligned to the tile row causing distortion. Reported-by: Andreas Reis Reported-by: Chris Clayton Reported-by: Norbert Preining Tested-by: Norbert Preining Tested-by: Chris Clayton Fixes: 03af84fe7f48 ("drm/i915: Choose partial chunksize based on tile row size") Fixes: a61007a83a46 ("drm/i915: Fix partial GGTT faulting") # enabling patch Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98402 Testcase: igt/gem_mmap_gtt/medium-copy-odd Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Jani Nikula Cc: # v4.9-rc1+ Link: http://patchwork.freedesktop.org/patch/msgid/20161107105443.27855-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen (cherry picked from commit 0ef723cbceb6dce8116e75d44c5b8679b2eba69a) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 23960de81b57..44b3f01faed3 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1806,7 +1806,7 @@ int i915_gem_fault(struct vm_area_struct *area, struct vm_fault *vmf) /* Use a partial view if it is bigger than available space */ chunk_size = MIN_CHUNK_PAGES; if (i915_gem_object_is_tiled(obj)) - chunk_size = max(chunk_size, tile_row_pages(obj)); + chunk_size = roundup(chunk_size, tile_row_pages(obj)); memset(&view, 0, sizeof(view)); view.type = I915_GGTT_VIEW_PARTIAL; -- cgit From 54905ab5fe7aa453610e31cec640e528aaedb2e2 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 7 Nov 2016 11:01:28 +0000 Subject: drm/i915: Limit Valleyview and earlier to only using mappable scanout MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Valleyview appears to be limited to only scanning out from the first 512MiB of the Global GTT. Lets presume that this behaviour was inherited from the display block copied from g4x (not Ironlake) and all earlier generations are similarly affected, though testing suggests different symptoms. For simplicity, impose that these platforms must scanout from the mappable region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this catches Cherryview which does not appear to be limited to the low aperture for its scanout.) v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about limiting this workaround to the old style of display engine. v3: Update changelog to reflect testing by Ville Syrjälä v4: Include the changes to the comments as well Reported-by: Luis Botello Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036 Fixes: 2efb813d5388 ("drm/i915: Fallback to using unmappable memory for scanout") Signed-off-by: Chris Wilson Cc: Akash Goel Cc: Joonas Lahtinen Cc: Ville Syrjälä Cc: # v4.9-rc1+ Link: http://patchwork.freedesktop.org/patch/msgid/20161107110128.28762-1-chris@chris-wilson.co.uk Reviewed-by: Ville Syrjälä (cherry picked from commit 767a222e47cc13239d38018887f911fec06169ea) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 44b3f01faed3..91ab7e9d6d2e 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3543,8 +3543,22 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, if (view->type == I915_GGTT_VIEW_NORMAL) vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, PIN_MAPPABLE | PIN_NONBLOCK); - if (IS_ERR(vma)) - vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, 0); + if (IS_ERR(vma)) { + struct drm_i915_private *i915 = to_i915(obj->base.dev); + unsigned int flags; + + /* Valleyview is definitely limited to scanning out the first + * 512MiB. Lets presume this behaviour was inherited from the + * g4x display engine and that all earlier gen are similarly + * limited. Testing suggests that it is a little more + * complicated than this. For example, Cherryview appears quite + * happy to scanout from anywhere within its global aperture. + */ + flags = 0; + if (HAS_GMCH_DISPLAY(i915)) + flags = PIN_MAPPABLE; + vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, flags); + } if (IS_ERR(vma)) goto err_unpin_display; -- cgit From 757124d95c42bb579d67df51e51789849929ee31 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 3 Nov 2016 17:47:51 -0400 Subject: drm/amdgpu: fix crash in acp_hw_fini On CZ/ST systems with AZ rather than ACP audio, we need to bail early in hw_fini since there is nothing to do. bug: https://bugs.freedesktop.org/show_bug.cgi?id=98276 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c index 892d60fb225b..2057683f7b59 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c @@ -395,9 +395,12 @@ static int acp_hw_fini(void *handle) { int i, ret; struct device *dev; - struct amdgpu_device *adev = (struct amdgpu_device *)handle; + /* return early if no ACP */ + if (!adev->acp.acp_genpd) + return 0; + for (i = 0; i < ACP_DEVS ; i++) { dev = get_mfd_cell_dev(adev->acp.acp_cell[i].name, i); ret = pm_genpd_remove_device(&adev->acp.acp_genpd->gpd, dev); -- cgit From 17ae1c650c1ecf8dc8e16d54b0f68a345965f43f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 3 Nov 2016 18:40:19 +0100 Subject: phy: fix device reference leaks Make sure to drop the reference taken by bus_find_device_by_name() before returning from phy_connect() and phy_attach(). Note that both function still take a reference to the phy device through phy_attach_direct(). Fixes: e13934563db0 ("[PATCH] PHY Layer fixup") Cc: Florian Fainelli Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index e977ba931878..1a4bf8acad78 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -723,6 +723,7 @@ struct phy_device *phy_connect(struct net_device *dev, const char *bus_id, phydev = to_phy_device(d); rc = phy_connect_direct(dev, phydev, handler, interface); + put_device(d); if (rc) return ERR_PTR(rc); @@ -953,6 +954,7 @@ struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, phydev = to_phy_device(d); rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface); + put_device(d); if (rc) return ERR_PTR(rc); -- cgit From c7262aaace1b17a650598063e3b9ee1785fde377 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 3 Nov 2016 18:40:20 +0100 Subject: net: ethernet: ti: cpsw: fix device and of_node leaks Make sure to drop the references taken by of_get_child_by_name() and bus_find_device() before returning from cpsw_phy_sel(). Note that holding a reference to the cpsw-phy-sel device does not prevent the devres-managed private data from going away. Fixes: 5892cd135e16 ("drivers: net: cpsw-phy-sel: Add new driver...") Cc: Mugunthan V N Cc: Grygorii Strashko Cc: linux-omap@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw-phy-sel.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/ti/cpsw-phy-sel.c b/drivers/net/ethernet/ti/cpsw-phy-sel.c index 054a8dd23dae..ba1e45ff6aae 100644 --- a/drivers/net/ethernet/ti/cpsw-phy-sel.c +++ b/drivers/net/ethernet/ti/cpsw-phy-sel.c @@ -176,9 +176,12 @@ void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave) } dev = bus_find_device(&platform_bus_type, NULL, node, match); + of_node_put(node); priv = dev_get_drvdata(dev); priv->cpsw_phy_sel(priv, phy_mode, slave); + + put_device(dev); } EXPORT_SYMBOL_GPL(cpsw_phy_sel); -- cgit From 6bed0118012ea350acbe606ab3ae0ed3d60ed5f3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 3 Nov 2016 18:40:21 +0100 Subject: net: ethernet: ti: davinci_emac: fix device reference leak Make sure to drop the references taken by bus_find_device() before returning from emac_dev_open(). Note that phy_connect still takes a reference to the phy device. Fixes: 5d69e0076a72 ("net: davinci_emac: switch to new mdio") Cc: Mugunthan V N Cc: Grygorii Strashko Cc: linux-omap@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_emac.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 2fd94a5bc1f3..84fbe5714f8b 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1410,6 +1410,7 @@ static int emac_dev_open(struct net_device *ndev) int i = 0; struct emac_priv *priv = netdev_priv(ndev); struct phy_device *phydev = NULL; + struct device *phy = NULL; ret = pm_runtime_get_sync(&priv->pdev->dev); if (ret < 0) { @@ -1488,19 +1489,20 @@ static int emac_dev_open(struct net_device *ndev) /* use the first phy on the bus if pdata did not give us a phy id */ if (!phydev && !priv->phy_id) { - struct device *phy; - phy = bus_find_device(&mdio_bus_type, NULL, NULL, match_first_device); - if (phy) + if (phy) { priv->phy_id = dev_name(phy); + if (!priv->phy_id || !*priv->phy_id) + put_device(phy); + } } if (!phydev && priv->phy_id && *priv->phy_id) { phydev = phy_connect(ndev, priv->phy_id, &emac_adjust_link, PHY_INTERFACE_MODE_MII); - + put_device(phy); /* reference taken by bus_find_device */ if (IS_ERR(phydev)) { dev_err(emac_dev, "could not connect to phy %s\n", priv->phy_id); -- cgit From 2271150bfb814b72ec57ae2fdf66e39da2eafafd Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 3 Nov 2016 18:40:22 +0100 Subject: net: hns: fix device reference leaks Make sure to drop the reference taken by class_find_device() in hnae_get_handle() on errors and when later releasing the handle. Fixes: 6fe6611ff275 ("net: add Hisilicon Network Subsystem...") Cc: Yisen Zhuang Cc: Salil Mehta Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns/hnae.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns/hnae.c b/drivers/net/ethernet/hisilicon/hns/hnae.c index c54c6fac0d1d..b6ed818f78ff 100644 --- a/drivers/net/ethernet/hisilicon/hns/hnae.c +++ b/drivers/net/ethernet/hisilicon/hns/hnae.c @@ -332,8 +332,10 @@ struct hnae_handle *hnae_get_handle(struct device *owner_dev, return ERR_PTR(-ENODEV); handle = dev->ops->get_handle(dev, port_id); - if (IS_ERR(handle)) + if (IS_ERR(handle)) { + put_device(&dev->cls_dev); return handle; + } handle->dev = dev; handle->owner_dev = owner_dev; @@ -356,6 +358,8 @@ out_when_init_queue: for (j = i - 1; j >= 0; j--) hnae_fini_queue(handle->qs[j]); + put_device(&dev->cls_dev); + return ERR_PTR(-ENOMEM); } EXPORT_SYMBOL(hnae_get_handle); @@ -377,6 +381,8 @@ void hnae_put_handle(struct hnae_handle *h) dev->ops->put_handle(h); module_put(dev->owner); + + put_device(&dev->cls_dev); } EXPORT_SYMBOL(hnae_put_handle); -- cgit From 7233bc84a3aeda835d334499dc00448373caf5c0 Mon Sep 17 00:00:00 2001 From: Marcelo Ricardo Leitner Date: Thu, 3 Nov 2016 17:03:41 -0200 Subject: sctp: assign assoc_id earlier in __sctp_connect sctp_wait_for_connect() currently already holds the asoc to keep it alive during the sleep, in case another thread release it. But Andrey Konovalov and Dmitry Vyukov reported an use-after-free in such situation. Problem is that __sctp_connect() doesn't get a ref on the asoc and will do a read on the asoc after calling sctp_wait_for_connect(), but by then another thread may have closed it and the _put on sctp_wait_for_connect will actually release it, causing the use-after-free. Fix is, instead of doing the read after waiting for the connect, do it before so, and avoid this issue as the socket is still locked by then. There should be no issue on returning the asoc id in case of failure as the application shouldn't trust on that number in such situations anyway. This issue doesn't exist in sctp_sendmsg() path. Reported-by: Dmitry Vyukov Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: Marcelo Ricardo Leitner Reviewed-by: Xin Long Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/sctp/socket.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 71b75f9d9c1b..faa48ff5cf4b 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1214,9 +1214,12 @@ static int __sctp_connect(struct sock *sk, timeo = sock_sndtimeo(sk, f_flags & O_NONBLOCK); - err = sctp_wait_for_connect(asoc, &timeo); - if ((err == 0 || err == -EINPROGRESS) && assoc_id) + if (assoc_id) *assoc_id = asoc->assoc_id; + err = sctp_wait_for_connect(asoc, &timeo); + /* Note: the asoc may be freed after the return of + * sctp_wait_for_connect. + */ /* Don't free association on exit. */ asoc = NULL; -- cgit From 483bed2b0ddd12ec33fc9407e0c6e1088e77a97c Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 4 Nov 2016 00:01:19 +0100 Subject: bpf: fix htab map destruction when extra reserve is in use Commit a6ed3ea65d98 ("bpf: restore behavior of bpf_map_update_elem") added an extra per-cpu reserve to the hash table map to restore old behaviour from pre prealloc times. When non-prealloc is in use for a map, then problem is that once a hash table extra element has been linked into the hash-table, and the hash table is destroyed due to refcount dropping to zero, then htab_map_free() -> delete_all_elements() will walk the whole hash table and drop all elements via htab_elem_free(). The problem is that the element from the extra reserve is first fed to the wrong backend allocator and eventually freed twice. Fixes: a6ed3ea65d98 ("bpf: restore behavior of bpf_map_update_elem") Reported-by: Dmitry Vyukov Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- kernel/bpf/hashtab.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c index 570eeca7bdfa..ad1bc67aff1b 100644 --- a/kernel/bpf/hashtab.c +++ b/kernel/bpf/hashtab.c @@ -687,7 +687,8 @@ static void delete_all_elements(struct bpf_htab *htab) hlist_for_each_entry_safe(l, n, head, hash_node) { hlist_del_rcu(&l->hash_node); - htab_elem_free(htab, l); + if (l->state != HTAB_EXTRA_ELEM_USED) + htab_elem_free(htab, l); } } } -- cgit From 20b2b24f91f70e7d3f0918c077546cb21bd73a87 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 4 Nov 2016 00:56:31 +0100 Subject: bpf: fix map not being uncharged during map creation failure In map_create(), we first find and create the map, then once that suceeded, we charge it to the user's RLIMIT_MEMLOCK, and then fetch a new anon fd through anon_inode_getfd(). The problem is, once the latter fails f.e. due to RLIMIT_NOFILE limit, then we only destruct the map via map->ops->map_free(), but without uncharging the previously locked memory first. That means that the user_struct allocation is leaked as well as the accounted RLIMIT_MEMLOCK memory not released. Make the label names in the fix consistent with bpf_prog_load(). Fixes: aaac3ba95e4c ("bpf: charge user for creation of BPF maps and programs") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- kernel/bpf/syscall.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index 228f962447a5..237f3d6a7ddc 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -194,7 +194,7 @@ static int map_create(union bpf_attr *attr) err = bpf_map_charge_memlock(map); if (err) - goto free_map; + goto free_map_nouncharge; err = bpf_map_new_fd(map); if (err < 0) @@ -204,6 +204,8 @@ static int map_create(union bpf_attr *attr) return err; free_map: + bpf_map_uncharge_memlock(map); +free_map_nouncharge: map->ops->map_free(map); return err; } -- cgit From e6e335bf3a400bc3b5a65322a891318a25749769 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 7 Nov 2016 10:36:46 -0800 Subject: ARC: change return value of userspace cmpxchg assist syscall The original syscall only used to return errno to indicate if cmpxchg succeeded. It was not returning the "previous" value which typical cmpxchg callers are interested in to build their slowpaths or retry loops. Given user preemption in syscall return path etc, it is not wise to check this in userspace afterwards, but should be what kernel actually observed in the syscall. So change the syscall interface to always return the previous value and additionally set Z flag to indicate whether operation succeeded or not (just like ARM implementation when they used to have this syscall) The flag approach avoids having to put_user errno which is nice given the use case for this syscall cares mostly about the "previous" value. Signed-off-by: Vineet Gupta --- arch/arc/include/asm/arcregs.h | 2 ++ arch/arc/kernel/process.c | 20 +++++++++++--------- 2 files changed, 13 insertions(+), 9 deletions(-) diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h index 7f3f9f63708c..1bd24ec3e350 100644 --- a/arch/arc/include/asm/arcregs.h +++ b/arch/arc/include/asm/arcregs.h @@ -43,12 +43,14 @@ #define STATUS_AE_BIT 5 /* Exception active */ #define STATUS_DE_BIT 6 /* PC is in delay slot */ #define STATUS_U_BIT 7 /* User/Kernel mode */ +#define STATUS_Z_BIT 11 #define STATUS_L_BIT 12 /* Loop inhibit */ /* These masks correspond to the status word(STATUS_32) bits */ #define STATUS_AE_MASK (1<status32 &= ~STATUS_Z_MASK; + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) return -EFAULT; preempt_disable(); - ret = __get_user(uval, uaddr); - if (ret) + if (__get_user(uval, uaddr)) goto done; - if (uval != expected) - ret = -EAGAIN; - else - ret = __put_user(new, uaddr); + if (uval == expected) { + if (!__put_user(new, uaddr)) + regs->status32 |= STATUS_Z_MASK; + } done: preempt_enable(); - return ret; + return uval; } void arch_cpu_idle(void) -- cgit From 922cc171998ac3dbe74d57011ef7ed57e9b0d7df Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 31 Oct 2016 14:09:52 -0700 Subject: ARC: timer: rtc: implement read loop in "C" vs. inline asm The current code doesn't even compile as somehow the inline assembly can't see the register names defined as ARC_RTC_* I'm pretty sure It worked when I first got it merged, but the tools were definitely different then. So better to write this in "C" anyways. CC: stable@vger.kernel.org #4.2+ Acked-by: Daniel Lezcano Signed-off-by: Vineet Gupta --- arch/arc/kernel/time.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c index f927b8dc6edd..c10390d1ddb6 100644 --- a/arch/arc/kernel/time.c +++ b/arch/arc/kernel/time.c @@ -152,14 +152,17 @@ static cycle_t arc_read_rtc(struct clocksource *cs) cycle_t full; } stamp; - - __asm__ __volatile( - "1: \n" - " lr %0, [AUX_RTC_LOW] \n" - " lr %1, [AUX_RTC_HIGH] \n" - " lr %2, [AUX_RTC_CTRL] \n" - " bbit0.nt %2, 31, 1b \n" - : "=r" (stamp.low), "=r" (stamp.high), "=r" (status)); + /* + * hardware has an internal state machine which tracks readout of + * low/high and updates the CTRL.status if + * - interrupt/exception taken between the two reads + * - high increments after low has been read + */ + do { + stamp.low = read_aux_reg(AUX_RTC_LOW); + stamp.high = read_aux_reg(AUX_RTC_HIGH); + status = read_aux_reg(AUX_RTC_CTRL); + } while (!(status & _BITUL(31))); return stamp.full; } -- cgit From bb29dd84333a96f309c6d0f88b285b5b78927058 Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Wed, 26 Oct 2016 10:33:31 -0400 Subject: SUNRPC: Fix suspicious RCU usage We need to hold the rcu_read_lock() when calling rcu_dereference(), otherwise we can't guarantee that the object being dereferenced still exists. Fixes: 39e5d2df ("SUNRPC search xprt switch for sockaddr") Signed-off-by: Anna Schumaker --- net/sunrpc/clnt.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 34dd7b26ee5f..62a482790937 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -2753,14 +2753,18 @@ EXPORT_SYMBOL_GPL(rpc_cap_max_reconnect_timeout); void rpc_clnt_xprt_switch_put(struct rpc_clnt *clnt) { + rcu_read_lock(); xprt_switch_put(rcu_dereference(clnt->cl_xpi.xpi_xpswitch)); + rcu_read_unlock(); } EXPORT_SYMBOL_GPL(rpc_clnt_xprt_switch_put); void rpc_clnt_xprt_switch_add_xprt(struct rpc_clnt *clnt, struct rpc_xprt *xprt) { + rcu_read_lock(); rpc_xprt_switch_add_xprt(rcu_dereference(clnt->cl_xpi.xpi_xpswitch), xprt); + rcu_read_unlock(); } EXPORT_SYMBOL_GPL(rpc_clnt_xprt_switch_add_xprt); @@ -2770,9 +2774,8 @@ bool rpc_clnt_xprt_switch_has_addr(struct rpc_clnt *clnt, struct rpc_xprt_switch *xps; bool ret; - xps = rcu_dereference(clnt->cl_xpi.xpi_xpswitch); - rcu_read_lock(); + xps = rcu_dereference(clnt->cl_xpi.xpi_xpswitch); ret = rpc_xprt_switch_has_addr(xps, sap); rcu_read_unlock(); return ret; -- cgit From 8ef3295530ddc969ea9a3f307d94df97fcbc0629 Mon Sep 17 00:00:00 2001 From: Petr Vandrovec Date: Mon, 7 Nov 2016 12:11:29 -0800 Subject: NFS: Ignore connections that have cl_rpcclient uninitialized cl_rpcclient starts as ERR_PTR(-EINVAL), and connections like that are floating freely through the system. Most places check whether pointer is valid before dereferencing it, but newly added code in nfs_match_client does not. Which causes crashes when more than one NFS mount point is present. Signed-off-by: Petr Vandrovec Signed-off-by: Anna Schumaker --- fs/nfs/client.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/nfs/client.c b/fs/nfs/client.c index 7555ba889d1f..ebecfb8fba06 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -314,7 +314,8 @@ static struct nfs_client *nfs_match_client(const struct nfs_client_initdata *dat /* Match the full socket address */ if (!rpc_cmp_addr_port(sap, clap)) /* Match all xprt_switch full socket addresses */ - if (!rpc_clnt_xprt_switch_has_addr(clp->cl_rpcclient, + if (IS_ERR(clp->cl_rpcclient) || + !rpc_clnt_xprt_switch_has_addr(clp->cl_rpcclient, sap)) continue; -- cgit From 192747166a468dd8fb5d47ad9d5048c138c1fc25 Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Wed, 26 Oct 2016 15:54:31 -0400 Subject: NFS: Don't print a pNFS error if we aren't using pNFS We used to check for a valid layout type id before verifying pNFS flags as an indicator for if we are using pNFS. This changed in 3132e49ece with the introduction of multiple layout types, since now we are passing an array of ids instead of just one. Since then, users have been seeing a KERN_ERR printk show up whenever mounting NFS v4 without pNFS. This patch restores the original behavior of exiting set_pnfs_layoutdriver() early if we aren't using pNFS. Fixes 3132e49ece ("pnfs: track multiple layout types in fsinfo structure") Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker --- fs/nfs/pnfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 56b2d96f9103..259ef85f435a 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -146,6 +146,8 @@ set_pnfs_layoutdriver(struct nfs_server *server, const struct nfs_fh *mntfh, u32 id; int i; + if (fsinfo->nlayouttypes == 0) + goto out_no_driver; if (!(server->nfs_client->cl_exchange_flags & (EXCHGID4_FLAG_USE_NON_PNFS | EXCHGID4_FLAG_USE_PNFS_MDS))) { printk(KERN_ERR "NFS: %s: cl_exchange_flags 0x%x\n", -- cgit From 0ac84b72c0ed96ace1d8973a06f0120a3b905177 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Mon, 7 Nov 2016 10:48:16 -0700 Subject: fs/nfs: Fix used uninitialized warn in nfs4_slot_seqid_in_use() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following warn: fs/nfs/nfs4session.c: In function ‘nfs4_slot_seqid_in_use’: fs/nfs/nfs4session.c:203:54: warning: ‘cur_seq’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (nfs4_slot_get_seqid(tbl, slotid, &cur_seq) == 0 && ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~ cur_seq == seq_nr && test_bit(slotid, tbl->used_slots)) ~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan Signed-off-by: Anna Schumaker --- fs/nfs/nfs4session.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4session.c b/fs/nfs/nfs4session.c index 150c5a1879bf..a61350f75c74 100644 --- a/fs/nfs/nfs4session.c +++ b/fs/nfs/nfs4session.c @@ -198,7 +198,7 @@ static int nfs4_slot_get_seqid(struct nfs4_slot_table *tbl, u32 slotid, static bool nfs4_slot_seqid_in_use(struct nfs4_slot_table *tbl, u32 slotid, u32 seq_nr) { - u32 cur_seq; + u32 cur_seq = 0; bool ret = false; spin_lock(&tbl->slot_tbl_lock); -- cgit From 5d41ce29e3b91ef305f88d23f72b3359de329cec Mon Sep 17 00:00:00 2001 From: David Ahern Date: Thu, 3 Nov 2016 16:17:26 -0700 Subject: net: icmp6_send should use dst dev to determine L3 domain icmp6_send is called in response to some event. The skb may not have the device set (skb->dev is NULL), but it is expected to have a dst set. Update icmp6_send to use the dst on the skb to determine L3 domain. Fixes: ca254490c8dfd ("net: Add VRF support to IPv6 stack") Signed-off-by: David Ahern Signed-off-by: David S. Miller --- net/ipv6/icmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index bd59c343d35f..7370ad2e693a 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -448,7 +448,7 @@ static void icmp6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info, if (__ipv6_addr_needs_scope_id(addr_type)) iif = skb->dev->ifindex; else - iif = l3mdev_master_ifindex(skb->dev); + iif = l3mdev_master_ifindex(skb_dst(skb)->dev); /* * Must not send error if the source does not uniquely -- cgit From f3358507c11999c91abf54744658bccd49b5879c Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 4 Nov 2016 12:55:36 +0200 Subject: virtio-net: drop legacy features in virtio 1 mode Virtio 1.0 spec says VIRTIO_F_ANY_LAYOUT and VIRTIO_NET_F_GSO are legacy-only feature bits. Do not negotiate them in virtio 1 mode. Note this is a spec violation so we need to backport it to stable/downstream kernels. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin Reviewed-by: Cornelia Huck Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index fad84f3f4109..fd8b1e62301f 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -2038,23 +2038,33 @@ static struct virtio_device_id id_table[] = { { 0 }, }; +#define VIRTNET_FEATURES \ + VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GUEST_CSUM, \ + VIRTIO_NET_F_MAC, \ + VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6, \ + VIRTIO_NET_F_HOST_ECN, VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6, \ + VIRTIO_NET_F_GUEST_ECN, VIRTIO_NET_F_GUEST_UFO, \ + VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ, \ + VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN, \ + VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ, \ + VIRTIO_NET_F_CTRL_MAC_ADDR, \ + VIRTIO_NET_F_MTU + static unsigned int features[] = { - VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GUEST_CSUM, - VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC, - VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6, - VIRTIO_NET_F_HOST_ECN, VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6, - VIRTIO_NET_F_GUEST_ECN, VIRTIO_NET_F_GUEST_UFO, - VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ, - VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN, - VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ, - VIRTIO_NET_F_CTRL_MAC_ADDR, + VIRTNET_FEATURES, +}; + +static unsigned int features_legacy[] = { + VIRTNET_FEATURES, + VIRTIO_NET_F_GSO, VIRTIO_F_ANY_LAYOUT, - VIRTIO_NET_F_MTU, }; static struct virtio_driver virtio_net_driver = { .feature_table = features, .feature_table_size = ARRAY_SIZE(features), + .feature_table_legacy = features_legacy, + .feature_table_size_legacy = ARRAY_SIZE(features_legacy), .driver.name = KBUILD_MODNAME, .driver.owner = THIS_MODULE, .id_table = id_table, -- cgit From 8e0140a2d7c9f55b794a5fce22e05350a435b965 Mon Sep 17 00:00:00 2001 From: Fabian Mewes Date: Fri, 4 Nov 2016 13:16:14 +0100 Subject: Documentation: networking: dsa: Update tagging protocols Add Qualcomm QCA tagging introduced in cafdc45c9 to the list of supported protocols. Signed-off-by: Fabian Mewes Reviewed-by: Andrew Lunn Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- Documentation/networking/dsa/dsa.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt index 6d6c07cf1a9a..63912ef34606 100644 --- a/Documentation/networking/dsa/dsa.txt +++ b/Documentation/networking/dsa/dsa.txt @@ -67,13 +67,14 @@ Note that DSA does not currently create network interfaces for the "cpu" and Switch tagging protocols ------------------------ -DSA currently supports 4 different tagging protocols, and a tag-less mode as +DSA currently supports 5 different tagging protocols, and a tag-less mode as well. The different protocols are implemented in: net/dsa/tag_trailer.c: Marvell's 4 trailer tag mode (legacy) net/dsa/tag_dsa.c: Marvell's original DSA tag net/dsa/tag_edsa.c: Marvell's enhanced DSA tag net/dsa/tag_brcm.c: Broadcom's 4 bytes tag +net/dsa/tag_qca.c: Qualcomm's 2 bytes tag The exact format of the tag protocol is vendor specific, but in general, they all contain something which: -- cgit From fd0285a39b1cb496f60210a9a00ad33a815603e7 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 4 Nov 2016 15:11:57 -0400 Subject: fib_trie: Correct /proc/net/route off by one error The display of /proc/net/route has had a couple issues due to the fact that when I originally rewrote most of fib_trie I made it so that the iterator was tracking the next value to use instead of the current. In addition it had an off by 1 error where I was tracking the first piece of data as position 0, even though in reality that belonged to the SEQ_START_TOKEN. This patch updates the code so the iterator tracks the last reported position and key instead of the next expected position and key. In addition it shifts things so that all of the leaves start at 1 instead of trying to report leaves starting with offset 0 as being valid. With these two issues addressed this should resolve any off by one errors that were present in the display of /proc/net/route. Fixes: 25b97c016b26 ("ipv4: off-by-one in continuation handling in /proc/net/route") Cc: Andy Whitcroft Reported-by: Jason Baron Tested-by: Jason Baron Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- net/ipv4/fib_trie.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 31cef3602585..4cff74d4133f 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -2413,22 +2413,19 @@ static struct key_vector *fib_route_get_idx(struct fib_route_iter *iter, struct key_vector *l, **tp = &iter->tnode; t_key key; - /* use cache location of next-to-find key */ + /* use cached location of previously found key */ if (iter->pos > 0 && pos >= iter->pos) { - pos -= iter->pos; key = iter->key; } else { - iter->pos = 0; + iter->pos = 1; key = 0; } - while ((l = leaf_walk_rcu(tp, key)) != NULL) { + pos -= iter->pos; + + while ((l = leaf_walk_rcu(tp, key)) && (pos-- > 0)) { key = l->key + 1; iter->pos++; - - if (--pos <= 0) - break; - l = NULL; /* handle unlikely case of a key wrap */ @@ -2437,7 +2434,7 @@ static struct key_vector *fib_route_get_idx(struct fib_route_iter *iter, } if (l) - iter->key = key; /* remember it */ + iter->key = l->key; /* remember it */ else iter->pos = 0; /* forget it */ @@ -2465,7 +2462,7 @@ static void *fib_route_seq_start(struct seq_file *seq, loff_t *pos) return fib_route_get_idx(iter, *pos); iter->pos = 0; - iter->key = 0; + iter->key = KEY_MAX; return SEQ_START_TOKEN; } @@ -2474,7 +2471,7 @@ static void *fib_route_seq_next(struct seq_file *seq, void *v, loff_t *pos) { struct fib_route_iter *iter = seq->private; struct key_vector *l = NULL; - t_key key = iter->key; + t_key key = iter->key + 1; ++*pos; @@ -2483,7 +2480,7 @@ static void *fib_route_seq_next(struct seq_file *seq, void *v, loff_t *pos) l = leaf_walk_rcu(&iter->tnode, key); if (l) { - iter->key = l->key + 1; + iter->key = l->key; iter->pos++; } else { iter->pos = 0; -- cgit From 7f8d61f005228fc48e6e2ca3c9af3302cd4870af Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 3 Nov 2016 13:09:24 +0100 Subject: percpu: use notrace variant of preempt_disable/preempt_enable Commit 345ddcc882d8 ("ftrace: Have set_ftrace_pid use the bitmap like events do") added a couple of this_cpu_read calls to the ftrace code. On x86 this is not a problem, since it has single instructions to read percpu data. Other architectures which use the generic variant now have additional preempt_disable and preempt_enable calls in the core ftrace code. This may lead to recursive calls and in result to a dead machine, e.g. if preemption and debugging options are enabled. To fix this use the notrace variant of preempt_disable and preempt_enable within the generic percpu code. Reported-and-bisected-by: Sebastian Ott Tested-by: Sebastian Ott Fixes: 345ddcc882d8 ("ftrace: Have set_ftrace_pid use the bitmap like events do") Signed-off-by: Heiko Carstens Acked-by: Steven Rostedt Signed-off-by: Martin Schwidefsky --- include/asm-generic/percpu.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h index 40e887068da2..0504ef8f3aa3 100644 --- a/include/asm-generic/percpu.h +++ b/include/asm-generic/percpu.h @@ -118,9 +118,9 @@ do { \ #define this_cpu_generic_read(pcp) \ ({ \ typeof(pcp) __ret; \ - preempt_disable(); \ + preempt_disable_notrace(); \ __ret = raw_cpu_generic_read(pcp); \ - preempt_enable(); \ + preempt_enable_notrace(); \ __ret; \ }) -- cgit From 027a9fe6835620422b6713892175716f3613dd9d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 30 Oct 2016 22:18:45 +0100 Subject: ALSA: info: Limit the proc text input size The ALSA proc handler allows currently the write in the unlimited size until kmalloc() fails. But basically the write is supposed to be only for small inputs, mostly for one line inputs, and we don't have to handle too large sizes at all. Since the kmalloc error results in the kernel warning, it's better to limit the size beforehand. This patch adds the limit of 16kB, which must be large enough for the currently existing code. Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Takashi Iwai --- sound/core/info.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/core/info.c b/sound/core/info.c index 895362a696c9..291d6ed80d80 100644 --- a/sound/core/info.c +++ b/sound/core/info.c @@ -329,6 +329,9 @@ static ssize_t snd_info_text_entry_write(struct file *file, if (!valid_pos(pos, count)) return -EIO; next = pos + count; + /* don't handle too large text inputs */ + if (next > 16 * 1024) + return -EIO; mutex_lock(&entry->access); buf = data->wbuffer; if (!buf) { -- cgit From 6809cd682b82dfff47943850d1a8c714f971b5ca Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 30 Oct 2016 22:13:19 +0100 Subject: ALSA: info: Return error for invalid read/write Currently the ALSA proc handler allows read or write even if the proc file were write-only or read-only. It's mostly harmless, does thing but allocating memory and ignores the input/output. But it doesn't tell user about the invalid use, and it's confusing and inconsistent in comparison with other proc files. This patch adds some sanity checks and let the proc handler returning an -EIO error when the invalid read/write is performed. Cc: # v4.2+ Signed-off-by: Takashi Iwai --- sound/core/info.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/core/info.c b/sound/core/info.c index 291d6ed80d80..8ab72e0f5932 100644 --- a/sound/core/info.c +++ b/sound/core/info.c @@ -325,6 +325,8 @@ static ssize_t snd_info_text_entry_write(struct file *file, size_t next; int err = 0; + if (!entry->c.text.write) + return -EIO; pos = *offset; if (!valid_pos(pos, count)) return -EIO; @@ -369,7 +371,9 @@ static int snd_info_seq_show(struct seq_file *seq, void *p) struct snd_info_private_data *data = seq->private; struct snd_info_entry *entry = data->entry; - if (entry->c.text.read) { + if (!entry->c.text.read) { + return -EIO; + } else { data->rbuffer->buffer = (char *)seq; /* XXX hack! */ entry->c.text.read(entry, data->rbuffer); } -- cgit From fba4f8e5c49443ddb1511f8f548ac801a693d7b7 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Mon, 17 Oct 2016 12:06:21 +0100 Subject: iommu/arm-smmu: Work around ARM DMA configuration The 32-bit ARM DMA configuration code predates the IOMMU core's default domain functionality, and instead relies on allocating its own domains and attaching any devices using the generic IOMMU binding to them. Unfortunately, it does this relatively early on in the creation of the device, before we've seen our add_device callback, which leads us to attempt to operate on a half-configured master. To avoid a crash, check for this situation on attach, but refuse to play, as there's nothing we can do. This at least allows VFIO to keep working for people who update their 32-bit DTs to the generic binding, albeit with a few (innocuous) warnings from the DMA layer on boot. Signed-off-by: Robin Murphy Signed-off-by: Will Deacon Signed-off-by: Joerg Roedel --- drivers/iommu/arm-smmu.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index c841eb7a1a74..3af7f8f62d0a 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -1228,6 +1228,16 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev) return -ENXIO; } + /* + * FIXME: The arch/arm DMA API code tries to attach devices to its own + * domains between of_xlate() and add_device() - we have no way to cope + * with that, so until ARM gets converted to rely on groups and default + * domains, just say no (but more politely than by dereferencing NULL). + * This should be at least a WARN_ON once that's sorted. + */ + if (!fwspec->iommu_priv) + return -ENODEV; + smmu = fwspec_smmu(fwspec); /* Ensure that the domain is finalised */ ret = arm_smmu_init_domain_context(domain, smmu); -- cgit From ec615f43d3b61edcfdc4d8d1f672be1059573d1b Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Thu, 3 Nov 2016 17:39:07 +0000 Subject: iommu/arm-smmu: Don't inadvertently reject multiple SMMUv3s We now delay installing our per-bus iommu_ops until we know an SMMU has successfully probed, as they don't serve much purpose beforehand, and doing so also avoids fights between multiple IOMMU drivers in a single kernel. However, the upshot of passing the return value of bus_set_iommu() back from our probe function is that if there happens to be more than one SMMUv3 device in a system, the second and subsequent probes will wind up returning -EBUSY to the driver core and getting torn down again. Avoid re-setting ops if ours are already installed, so that any genuine failures stand out. Fixes: 08d4ca2a672b ("iommu/arm-smmu: Support non-PCI devices with SMMUv3") CC: Lorenzo Pieralisi CC: Hanjun Guo Signed-off-by: Robin Murphy Signed-off-by: Joerg Roedel --- drivers/iommu/arm-smmu-v3.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index 15c01c3cd540..e6f9b2d745ca 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -2636,17 +2636,26 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev) /* And we're up. Go go go! */ of_iommu_set_ops(dev->of_node, &arm_smmu_ops); #ifdef CONFIG_PCI - pci_request_acs(); - ret = bus_set_iommu(&pci_bus_type, &arm_smmu_ops); - if (ret) - return ret; + if (pci_bus_type.iommu_ops != &arm_smmu_ops) { + pci_request_acs(); + ret = bus_set_iommu(&pci_bus_type, &arm_smmu_ops); + if (ret) + return ret; + } #endif #ifdef CONFIG_ARM_AMBA - ret = bus_set_iommu(&amba_bustype, &arm_smmu_ops); - if (ret) - return ret; + if (amba_bustype.iommu_ops != &arm_smmu_ops) { + ret = bus_set_iommu(&amba_bustype, &arm_smmu_ops); + if (ret) + return ret; + } #endif - return bus_set_iommu(&platform_bus_type, &arm_smmu_ops); + if (platform_bus_type.iommu_ops != &arm_smmu_ops) { + ret = bus_set_iommu(&platform_bus_type, &arm_smmu_ops); + if (ret) + return ret; + } + return 0; } static int arm_smmu_device_remove(struct platform_device *pdev) -- cgit From 3c117b543528b0d25801bd75444037dd0fcd2b8d Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Wed, 2 Nov 2016 17:31:32 +0000 Subject: iommu/arm-smmu: Check that iommu_fwspecs are ours We seem to have forgotten to check that iommu_fwspecs actually belong to us before we go ahead and dereference their private data. Oops. Fixes: 021bb8420d44 ("iommu/arm-smmu: Wire up generic configuration support") Signed-off-by: Robin Murphy Signed-off-by: Joerg Roedel --- drivers/iommu/arm-smmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index 3af7f8f62d0a..d388629ab990 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -1400,7 +1400,7 @@ static int arm_smmu_add_device(struct device *dev) fwspec = dev->iommu_fwspec; if (ret) goto out_free; - } else if (fwspec) { + } else if (fwspec && fwspec->ops == &arm_smmu_ops) { smmu = arm_smmu_get_by_node(to_of_node(fwspec->iommu_fwnode)); } else { return -ENODEV; -- cgit From 8c82d6ec5abcf9691d37f329bf5f42f6868405db Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Mon, 7 Nov 2016 18:25:09 +0000 Subject: iommu/arm-smmu: Fix out-of-bounds dereference When we iterate a master's config entries, what we generally care about is the entry's stream map index, rather than the entry index itself, so it's nice to have the iterator automatically assign the former from the latter. Unfortunately, booting with KASAN reveals the oversight that using a simple comma operator results in the entry index being dereferenced before being checked for validity, so we always access one element past the end of the fwspec array. Flip things around so that the check always happens before the index may be dereferenced. Fixes: adfec2e709d2 ("iommu/arm-smmu: Convert to iommu_fwspec") Reported-by: Mark Rutland Signed-off-by: Robin Murphy Acked-by: Will Deacon Signed-off-by: Joerg Roedel --- drivers/iommu/arm-smmu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index d388629ab990..8f7281444551 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -324,8 +324,10 @@ struct arm_smmu_master_cfg { #define INVALID_SMENDX -1 #define __fwspec_cfg(fw) ((struct arm_smmu_master_cfg *)fw->iommu_priv) #define fwspec_smmu(fw) (__fwspec_cfg(fw)->smmu) +#define fwspec_smendx(fw, i) \ + (i >= fw->num_ids ? INVALID_SMENDX : __fwspec_cfg(fw)->smendx[i]) #define for_each_cfg_sme(fw, i, idx) \ - for (i = 0; idx = __fwspec_cfg(fw)->smendx[i], i < fw->num_ids; ++i) + for (i = 0; idx = fwspec_smendx(fw, i), i < fw->num_ids; ++i) struct arm_smmu_device { struct device *dev; -- cgit From bea64033dd7b5fb6296eda8266acab6364ce1554 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 8 Nov 2016 15:08:26 +0100 Subject: iommu/vt-d: Fix dead-locks in disable_dmar_iommu() path It turns out that the disable_dmar_iommu() code-path tried to get the device_domain_lock recursivly, which will dead-lock when this code runs on dmar removal. Fix both code-paths that could lead to the dead-lock. Fixes: 55d940430ab9 ('iommu/vt-d: Get rid of domain->iommu_lock') Signed-off-by: Joerg Roedel --- drivers/iommu/intel-iommu.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index a4407eabf0e6..3965e73db51c 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -1711,6 +1711,7 @@ static void disable_dmar_iommu(struct intel_iommu *iommu) if (!iommu->domains || !iommu->domain_ids) return; +again: spin_lock_irqsave(&device_domain_lock, flags); list_for_each_entry_safe(info, tmp, &device_domain_list, global) { struct dmar_domain *domain; @@ -1723,10 +1724,19 @@ static void disable_dmar_iommu(struct intel_iommu *iommu) domain = info->domain; - dmar_remove_one_dev_info(domain, info->dev); + __dmar_remove_one_dev_info(info); - if (!domain_type_is_vm_or_si(domain)) + if (!domain_type_is_vm_or_si(domain)) { + /* + * The domain_exit() function can't be called under + * device_domain_lock, as it takes this lock itself. + * So release the lock here and re-run the loop + * afterwards. + */ + spin_unlock_irqrestore(&device_domain_lock, flags); domain_exit(domain); + goto again; + } } spin_unlock_irqrestore(&device_domain_lock, flags); -- cgit From 7ee7e87dfb158e79019ea1d5ea1b0e6f2bc93ee4 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 7 Nov 2016 19:57:00 +0100 Subject: genirq: Use irq type from irqdata instead of irqdesc The type flags in the irq descriptor are there for historical reasons and only updated via irq_modify_status() or irq_set_type(). Both functions also update the type flags in irqdata. __setup_irq() is the only left over user of the type flags in the irq descriptor. If __setup_irq() is called with empty irq type flags, then the type flags are retrieved from irqdata. If an interrupt is shared, then the type flags are compared with the type flags stored in the irq descriptor. On x86 the ioapic does not have a irq_set_type() callback because the type is defined in the BIOS tables and cannot be changed. The type is stored in irqdata at setup time without updating the type data in the irq descriptor. As a result the comparison described above fails. There is no point in updating the irq descriptor flags because the only relevant storage is irqdata. Use the type flags from irqdata for both retrieval and comparison in __setup_irq() instead. Aside of that the print out in case of non matching type flags has the old and new type flags arguments flipped. Fix that as well. For correctness sake the flags stored in the irq descriptor should be removed, but this is beyond the scope of this bugfix and will be done in a later patch. Fixes: 4b357daed698 ("genirq: Look-up trigger type if not specified by caller") Reported-and-tested-by: Mika Westerberg Signed-off-by: Thomas Gleixner Cc: Marc Zyngier Cc: Jon Hunter Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1611072020360.3501@nanos Signed-off-by: Thomas Gleixner --- kernel/irq/manage.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 9c4d30483264..6b669593e7eb 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -1341,12 +1341,12 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) } else if (new->flags & IRQF_TRIGGER_MASK) { unsigned int nmsk = new->flags & IRQF_TRIGGER_MASK; - unsigned int omsk = irq_settings_get_trigger_mask(desc); + unsigned int omsk = irqd_get_trigger_type(&desc->irq_data); if (nmsk != omsk) /* hope the handler works with current trigger mode */ pr_warn("irq %d uses trigger mode %u; requested %u\n", - irq, nmsk, omsk); + irq, omsk, nmsk); } *old_ptr = new; -- cgit From a29d126027c781eaa305ecae432bb04d41e198c5 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 8 Nov 2016 14:52:18 +0100 Subject: drm/amdgpu/powerplay/smu7: fix unintialized data usage A recent bugfix replaced an out-of-bounds access with direct use of unintialized data: drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c: In function 'smu7_patch_limits_vddc': drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddc' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:11: note: 'vddc' was declared here drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddci' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:17: note: 'vddci' was declared here uint32_t vddc, vddci; This initializes the data as before using the correct type. Fixes: 77f7f71f5be1 ("drm/amdgpu/powerplay/smu7: fix static checker warning") Signed-off-by: Arnd Bergmann Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 75854021f403..51fb86f20c21 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -2133,9 +2133,11 @@ static int smu7_patch_limits_vddc(struct pp_hwmgr *hwmgr, struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend); if (tab) { + vddc = tab->vddc; smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddc, &data->vddc_leakage); tab->vddc = vddc; + vddci = tab->vddci; smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddci, &data->vddci_leakage); tab->vddci = vddci; -- cgit From f20024d8ba6bc8abf8d0ec12eabfdedd9935fff2 Mon Sep 17 00:00:00 2001 From: Andrew Shadura Date: Thu, 3 Nov 2016 11:09:24 +0100 Subject: drm/amd/powerplay: return false instead of -EINVAL Returning -EINVAL from a bool-returning function phm_check_smc_update_required_for_display_configuration has an unexpected effect of returning true, which is probably not what was intended. Replace -EINVAL by false. The only place this function is called from is psm_adjust_power_state_dynamic in drivers/gpu/drm/amd/powerplay/eventmgr/psm.c:106: if (!equal || phm_check_smc_update_required_for_display_configuration(hwmgr)) { phm_apply_state_adjust_rules(hwmgr, requested, pcurrent); phm_set_power_state(hwmgr, &pcurrent->hardware, &requested->hardware); hwmgr->current_ps = requested; } It seems to expect a boolean value here. This issue has been found using the following Coccinelle semantic patch written by Peter Senna Tschudin: @@ identifier f; constant C; typedef bool; @@ bool f (...){ <+... * return -C; ...+> } Reviewed-by: Alex Deucher Signed-off-by: Andrew Shadura Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c index 14f8c1f4da3d..0723758ed065 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c @@ -272,7 +272,7 @@ bool phm_check_smc_update_required_for_display_configuration(struct pp_hwmgr *hw PHM_FUNC_CHECK(hwmgr); if (hwmgr->hwmgr_func->check_smc_update_required_for_display_configuration == NULL) - return -EINVAL; + return false; return hwmgr->hwmgr_func->check_smc_update_required_for_display_configuration(hwmgr); } -- cgit From 76a08404742e6da79f1e5002ac39033dc79d94da Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 8 Nov 2016 08:47:14 -0800 Subject: Revert "ARC: build: retire old toggles" This has caused a bunch of build failures at a few sites, with GNU 2015.12 and older as the assembler seems to need -mlock to be able to grok llock/scond instructions for ARC700 builds. different places since the older tools still seem to release of tools which most people are using seem to trip with the -mlock flag not being passed. This reverts commit c3005475889c7c730638f95d13be3360f0b33e98. --- arch/arc/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 864adad52280..aa82d13d4213 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -50,6 +50,9 @@ atleast_gcc44 := $(call cc-ifversion, -ge, 0404, y) cflags-$(atleast_gcc44) += -fsection-anchors +cflags-$(CONFIG_ARC_HAS_LLSC) += -mlock +cflags-$(CONFIG_ARC_HAS_SWAPE) += -mswape + ifdef CONFIG_ISA_ARCV2 ifndef CONFIG_ARC_HAS_LL64 -- cgit From 66619433d0fdf3e7d9f573993217b0d2cc3044fa Mon Sep 17 00:00:00 2001 From: Noam Camus Date: Tue, 8 Nov 2016 11:58:23 +0200 Subject: ARC: [plat-eznps] remove IPI clear from SMP operations Today we register to plat_smp_ops.clear() method which actually is acking the IPI. However this is already taking care by our irqchip driver specifically by the irq_chip.irq_eoi() method. This is perfect timing where it should be done and no special handling is needed at plat_smp_ops.clear(). Signed-off-by: Noam Camus Signed-off-by: Vineet Gupta --- arch/arc/plat-eznps/smp.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/arc/plat-eznps/smp.c b/arch/arc/plat-eznps/smp.c index 5e901f86e4bd..56a4c8522f11 100644 --- a/arch/arc/plat-eznps/smp.c +++ b/arch/arc/plat-eznps/smp.c @@ -140,16 +140,10 @@ static void eznps_init_per_cpu(int cpu) mtm_enable_core(cpu); } -static void eznps_ipi_clear(int irq) -{ - write_aux_reg(CTOP_AUX_IACK, 1 << irq); -} - struct plat_smp_ops plat_smp_ops = { .info = smp_cpuinfo_buf, .init_early_smp = eznps_init_cpumasks, .cpu_kick = eznps_smp_wakeup_cpu, .ipi_send = eznps_ipi_send, .init_per_cpu = eznps_init_per_cpu, - .ipi_clear = eznps_ipi_clear, }; -- cgit From 19dbc76228899be555b84a09fd3a364c2ce86bbb Mon Sep 17 00:00:00 2001 From: Noam Camus Date: Tue, 8 Nov 2016 15:20:59 +0200 Subject: ARC: [plat-eznps] set default baud for early console For CONFIG_SERIAL_EARLYCON we need 800MHz for NPS SoC The early console driver uses BASE_BAUD and not using dtb. The default of 50MHz is NOT good for NPS SoC. Signed-off-by: Noam Camus Signed-off-by: Vineet Gupta --- arch/arc/kernel/devtree.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c index f1e07c2344f8..3b67f538f142 100644 --- a/arch/arc/kernel/devtree.c +++ b/arch/arc/kernel/devtree.c @@ -31,6 +31,8 @@ static void __init arc_set_early_base_baud(unsigned long dt_root) arc_base_baud = 166666666; /* Fixed 166.6MHz clk (TB10x) */ else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp")) arc_base_baud = 33333333; /* Fixed 33MHz clk (AXS10x) */ + else if (of_flat_dt_is_compatible(dt_root, "ezchip,arc-nps")) + arc_base_baud = 800000000; /* Fixed 800MHz clk (NPS) */ else arc_base_baud = 50000000; /* Fixed default 50MHz */ } -- cgit From 34e71e4cbb8eb467dbcfb3afbd2b95ff2b08f482 Mon Sep 17 00:00:00 2001 From: Yuriy Kolerov Date: Tue, 8 Nov 2016 10:08:31 +0300 Subject: ARC: IRQ: Do not use hwirq as virq and vice versa This came up when reviewing code to address missing IRQ affinity setting in AXS103 platform and/or implementing hierarchical IRQ domains - smp_ipi_irq_setup() callers pass hwirq but in turn calls request_percpu_irq() which expects a linux virq. So invoke irq_find_mapping() to do the conversion (also explicitify this in code by renaming the args appropriately) - idu_of_init()/idu_cascade_isr() were similarly using linux virq where hwirq is expected, so do the conversion using irqd_to_hwirq() helper Signed-off-by: Yuriy Kolerov [vgupta: made changelog a bit concise a bit] Signed-off-by: Vineet Gupta --- arch/arc/include/asm/smp.h | 4 ++-- arch/arc/kernel/mcip.c | 19 +++++++++---------- arch/arc/kernel/smp.c | 13 +++++++++---- 3 files changed, 20 insertions(+), 16 deletions(-) diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h index 89fdd1b0a76e..0861007d9ef3 100644 --- a/arch/arc/include/asm/smp.h +++ b/arch/arc/include/asm/smp.h @@ -37,9 +37,9 @@ extern const char *arc_platform_smp_cpuinfo(void); * API expected BY platform smp code (FROM arch smp code) * * smp_ipi_irq_setup: - * Takes @cpu and @irq to which the arch-common ISR is hooked up + * Takes @cpu and @hwirq to which the arch-common ISR is hooked up */ -extern int smp_ipi_irq_setup(int cpu, int irq); +extern int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq); /* * struct plat_smp_ops - SMP callbacks provided by platform to ARC SMP diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index c424d5abc318..6d18bb871926 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -207,16 +207,15 @@ static struct irq_chip idu_irq_chip = { }; -static int idu_first_irq; +static irq_hw_number_t idu_first_hwirq; static void idu_cascade_isr(struct irq_desc *desc) { - struct irq_domain *domain = irq_desc_get_handler_data(desc); - unsigned int core_irq = irq_desc_get_irq(desc); - unsigned int idu_irq; + struct irq_domain *idu_domain = irq_desc_get_handler_data(desc); + irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc)); + irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq; - idu_irq = core_irq - idu_first_irq; - generic_handle_irq(irq_find_mapping(domain, idu_irq)); + generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq)); } static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq) @@ -282,7 +281,7 @@ idu_of_init(struct device_node *intc, struct device_node *parent) struct irq_domain *domain; /* Read IDU BCR to confirm nr_irqs */ int nr_irqs = of_irq_count(intc); - int i, irq; + int i, virq; struct mcip_bcr mp; READ_BCR(ARC_REG_MCIP_BCR, mp); @@ -303,11 +302,11 @@ idu_of_init(struct device_node *intc, struct device_node *parent) * however we need it to get the parent virq and set IDU handler * as first level isr */ - irq = irq_of_parse_and_map(intc, i); + virq = irq_of_parse_and_map(intc, i); if (!i) - idu_first_irq = irq; + idu_first_hwirq = irqd_to_hwirq(irq_get_irq_data(virq)); - irq_set_chained_handler_and_data(irq, idu_cascade_isr, domain); + irq_set_chained_handler_and_data(virq, idu_cascade_isr, domain); } __mcip_cmd(CMD_IDU_ENABLE, 0); diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index f00029e9cbe4..88674d972c9d 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -353,20 +354,24 @@ irqreturn_t do_IPI(int irq, void *dev_id) */ static DEFINE_PER_CPU(int, ipi_dev); -int smp_ipi_irq_setup(int cpu, int irq) +int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq) { int *dev = per_cpu_ptr(&ipi_dev, cpu); + unsigned int virq = irq_find_mapping(NULL, hwirq); + + if (!virq) + panic("Cannot find virq for root domain and hwirq=%lu", hwirq); /* Boot cpu calls request, all call enable */ if (!cpu) { int rc; - rc = request_percpu_irq(irq, do_IPI, "IPI Interrupt", dev); + rc = request_percpu_irq(virq, do_IPI, "IPI Interrupt", dev); if (rc) - panic("Percpu IRQ request failed for %d\n", irq); + panic("Percpu IRQ request failed for %u\n", virq); } - enable_percpu_irq(irq, 0); + enable_percpu_irq(virq, 0); return 0; } -- cgit From 0a0a047def15b7c8bcd27671d2be2de3d37fb30d Mon Sep 17 00:00:00 2001 From: Yuriy Kolerov Date: Tue, 8 Nov 2016 10:08:32 +0300 Subject: ARCv2: MCIP: Use IDU_M_DISTRI_DEST mode if there is only 1 destination core ARC linux uses 2 distribution modes for common interrupts: round robin mode (IDU_M_DISTRI_RR) and a simple destination mode (IDU_M_DISTRI_DEST). The first one is used when more than 1 cores may handle a common interrupt and the second one is used when only 1 core may handle a common interrupt. However idu_irq_set_affinity() always sets IDU_M_DISTRI_RR for all affinity values. But there is no sense in setting of such mode if only 1 core must handle a common interrupt. Signed-off-by: Yuriy Kolerov Signed-off-by: Vineet Gupta --- arch/arc/kernel/mcip.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index 6d18bb871926..f39142acc89e 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -181,6 +181,8 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask, { unsigned long flags; cpumask_t online; + unsigned int destination_bits; + unsigned int distribution_mode; /* errout if no online cpu per @cpumask */ if (!cpumask_and(&online, cpumask, cpu_online_mask)) @@ -188,8 +190,15 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask, raw_spin_lock_irqsave(&mcip_lock, flags); - idu_set_dest(data->hwirq, cpumask_bits(&online)[0]); - idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR); + destination_bits = cpumask_bits(&online)[0]; + idu_set_dest(data->hwirq, destination_bits); + + if (ffs(destination_bits) == fls(destination_bits)) + distribution_mode = IDU_M_DISTRI_DEST; + else + distribution_mode = IDU_M_DISTRI_RR; + + idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, distribution_mode); raw_spin_unlock_irqrestore(&mcip_lock, flags); -- cgit From 16d917b130d782b94fa02afc7bdf0d4aae689da4 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 8 Nov 2016 14:25:24 -0600 Subject: PCI: Don't attempt to claim shadow copies of ROM If we're using a shadow copy of a PCI device ROM, the shadow copy is in RAM and the device never sees accesses to it and doesn't respond to it. We don't have to route the shadow range to the PCI device, and the device doesn't have to claim the range. Previously we treated the shadow copy as though it were the ROM BAR, and we failed to claim it because the region wasn't routed to the device: pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci_bus 0000:01: Allocating resources pci 0000:01:00.0: can't claim BAR 6 [mem 0x000c0000-0x000dffff]: no compatible bridge window The failure path of pcibios_allocate_dev_rom_resource() cleared out the resource start address, which also caused the following ioremap() warning: WARNING: CPU: 0 PID: 116 at /build/linux-akdJXO/linux-4.8.0/arch/x86/mm/ioremap.c:121 __ioremap_caller+0x1ec/0x370 ioremap on RAM at 0x0000000000000000 - 0x000000000001ffff Handle an option ROM shadow copy as RAM, without trying to insert it into the iomem resource tree. This fixes a regression caused by 0c0e0736acad ("PCI: Set ROM shadow location in arch code, not in PCI core"), which appeared in v4.6. The regression causes video device initialization to fail. This was reported on AMD Turks, but it likely affects others as well. Fixes: 0c0e0736acad ("PCI: Set ROM shadow location in arch code, not in PCI core") Reported-and-tested-by: Vecu Bosseur Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1627496 Link: https://bugzilla.kernel.org/show_bug.cgi?id=175391 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1352272 Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org # v4.6+ --- drivers/pci/setup-res.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 66c4d8f42233..9526e341988b 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -121,6 +121,14 @@ int pci_claim_resource(struct pci_dev *dev, int resource) return -EINVAL; } + /* + * If we have a shadow copy in RAM, the PCI device doesn't respond + * to the shadow range, so we don't need to claim it, and upstream + * bridges don't need to route the range to the device. + */ + if (res->flags & IORESOURCE_ROM_SHADOW) + return 0; + root = pci_find_parent_resource(dev, res); if (!root) { dev_info(&dev->dev, "can't claim BAR %d %pR: no compatible bridge window\n", -- cgit From 8fbfef7f505bba60fb57078b7621270ee57cd1c4 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Thu, 3 Nov 2016 17:14:03 -0700 Subject: ipvs: use IPVS_CMD_ATTR_MAX for family.maxattr family.maxattr is the max index for policy[], the size of ops[] is determined with ARRAY_SIZE(). Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Cc: Pablo Neira Ayuso Signed-off-by: Cong Wang Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_ctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index c3c809b2e712..a6e44ef2ec9a 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -2845,7 +2845,7 @@ static struct genl_family ip_vs_genl_family = { .hdrsize = 0, .name = IPVS_GENL_NAME, .version = IPVS_GENL_VERSION, - .maxattr = IPVS_CMD_MAX, + .maxattr = IPVS_CMD_ATTR_MAX, .netnsok = true, /* Make ipvsadm to work on netns */ }; -- cgit From fb9c9649a1d0a65a8f94f784aa18252a0dd584c1 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Sat, 29 Oct 2016 03:01:50 +0200 Subject: netfilter: connmark: ignore skbs with magic untracked conntrack objects The (percpu) untracked conntrack entries can end up with nonzero connmarks. The 'untracked' conntrack objects are merely a way to distinguish INVALID (i.e. protocol connection tracker says payload doesn't meet some requirements or packet was never seen by the connection tracking code) from packets that are intentionally not tracked (some icmpv6 types such as neigh solicitation, or by using 'iptables -j CT --notrack' option). Untracked conntrack objects are implementation detail, we might as well use invalid magic address instead to tell INVALID and UNTRACKED apart. Check skb->nfct for untracked dummy and behave as if skb->nfct is NULL. Reported-by: XU Tianwen Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_connmark.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/xt_connmark.c b/net/netfilter/xt_connmark.c index 69f78e96fdb4..b83e158e116a 100644 --- a/net/netfilter/xt_connmark.c +++ b/net/netfilter/xt_connmark.c @@ -44,7 +44,7 @@ connmark_tg(struct sk_buff *skb, const struct xt_action_param *par) u_int32_t newmark; ct = nf_ct_get(skb, &ctinfo); - if (ct == NULL) + if (ct == NULL || nf_ct_is_untracked(ct)) return XT_CONTINUE; switch (info->mode) { @@ -97,7 +97,7 @@ connmark_mt(const struct sk_buff *skb, struct xt_action_param *par) const struct nf_conn *ct; ct = nf_ct_get(skb, &ctinfo); - if (ct == NULL) + if (ct == NULL || nf_ct_is_untracked(ct)) return false; return ((ct->mark & info->mask) == info->mark) ^ info->invert; -- cgit From 6114cc516dcc0d311badb83ad7db5aa4b611bea6 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 3 Nov 2016 14:44:42 +0100 Subject: netfilter: conntrack: fix CT target for UNSPEC helpers Thomas reports its not possible to attach the H.245 helper: iptables -t raw -A PREROUTING -p udp -j CT --helper H.245 iptables: No chain/target/match by that name. xt_CT: No such helper "H.245" This is because H.245 registers as NFPROTO_UNSPEC, but the CT target passes NFPROTO_IPV4/IPV6 to nf_conntrack_helper_try_module_get. We should treat UNSPEC as wildcard and ignore the l3num instead. Reported-by: Thomas Woerner Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_helper.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c index 336e21559e01..7341adf7059d 100644 --- a/net/netfilter/nf_conntrack_helper.c +++ b/net/netfilter/nf_conntrack_helper.c @@ -138,9 +138,14 @@ __nf_conntrack_helper_find(const char *name, u16 l3num, u8 protonum) for (i = 0; i < nf_ct_helper_hsize; i++) { hlist_for_each_entry_rcu(h, &nf_ct_helper_hash[i], hnode) { - if (!strcmp(h->name, name) && - h->tuple.src.l3num == l3num && - h->tuple.dst.protonum == protonum) + if (strcmp(h->name, name)) + continue; + + if (h->tuple.src.l3num != NFPROTO_UNSPEC && + h->tuple.src.l3num != l3num) + continue; + + if (h->tuple.dst.protonum == protonum) return h; } } -- cgit From e0df8cae6c16b9ba66a005079aa754b9eedc6efa Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 4 Nov 2016 16:54:58 +0100 Subject: netfilter: conntrack: refine gc worker heuristics Nicolas Dichtel says: After commit b87a2f9199ea ("netfilter: conntrack: add gc worker to remove timed-out entries"), netlink conntrack deletion events may be sent with a huge delay. Nicolas further points at this line: goal = min(nf_conntrack_htable_size / GC_MAX_BUCKETS_DIV, GC_MAX_BUCKETS); and indeed, this isn't optimal at all. Rationale here was to ensure that we don't block other work items for too long, even if nf_conntrack_htable_size is huge. But in order to have some guarantee about maximum time period where a scan of the full conntrack table completes we should always use a fixed slice size, so that once every N scans the full table has been examined at least once. We also need to balance this vs. the case where the system is either idle (i.e., conntrack table (almost) empty) or very busy (i.e. eviction happens from packet path). So, after some discussion with Nicolas: 1. want hard guarantee that we scan entire table at least once every X s -> need to scan fraction of table (get rid of upper bound) 2. don't want to eat cycles on idle or very busy system -> increase interval if we did not evict any entries 3. don't want to block other worker items for too long -> make fraction really small, and prefer small scan interval instead 4. Want reasonable short time where we detect timed-out entry when system went idle after a burst of traffic, while not doing scans all the time. -> Store next gc scan in worker, increasing delays when no eviction happened and shrinking delay when we see timed out entries. The old gc interval is turned into a max number, scans can now happen every jiffy if stale entries are present. Longest possible time period until an entry is evicted is now 2 minutes in worst case (entry expires right after it was deemed 'not expired'). Reported-by: Nicolas Dichtel Signed-off-by: Florian Westphal Acked-by: Nicolas Dichtel Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_core.c | 49 ++++++++++++++++++++++++++++++++------- 1 file changed, 41 insertions(+), 8 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index df2f5a3901df..0f87e5d21be7 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -76,6 +76,7 @@ struct conntrack_gc_work { struct delayed_work dwork; u32 last_bucket; bool exiting; + long next_gc_run; }; static __read_mostly struct kmem_cache *nf_conntrack_cachep; @@ -83,9 +84,11 @@ static __read_mostly spinlock_t nf_conntrack_locks_all_lock; static __read_mostly DEFINE_SPINLOCK(nf_conntrack_locks_all_lock); static __read_mostly bool nf_conntrack_locks_all; +/* every gc cycle scans at most 1/GC_MAX_BUCKETS_DIV part of table */ #define GC_MAX_BUCKETS_DIV 64u -#define GC_MAX_BUCKETS 8192u -#define GC_INTERVAL (5 * HZ) +/* upper bound of scan intervals */ +#define GC_INTERVAL_MAX (2 * HZ) +/* maximum conntracks to evict per gc run */ #define GC_MAX_EVICTS 256u static struct conntrack_gc_work conntrack_gc_work; @@ -936,13 +939,13 @@ static noinline int early_drop(struct net *net, unsigned int _hash) static void gc_worker(struct work_struct *work) { unsigned int i, goal, buckets = 0, expired_count = 0; - unsigned long next_run = GC_INTERVAL; - unsigned int ratio, scanned = 0; struct conntrack_gc_work *gc_work; + unsigned int ratio, scanned = 0; + unsigned long next_run; gc_work = container_of(work, struct conntrack_gc_work, dwork.work); - goal = min(nf_conntrack_htable_size / GC_MAX_BUCKETS_DIV, GC_MAX_BUCKETS); + goal = nf_conntrack_htable_size / GC_MAX_BUCKETS_DIV; i = gc_work->last_bucket; do { @@ -982,17 +985,47 @@ static void gc_worker(struct work_struct *work) if (gc_work->exiting) return; + /* + * Eviction will normally happen from the packet path, and not + * from this gc worker. + * + * This worker is only here to reap expired entries when system went + * idle after a busy period. + * + * The heuristics below are supposed to balance conflicting goals: + * + * 1. Minimize time until we notice a stale entry + * 2. Maximize scan intervals to not waste cycles + * + * Normally, expired_count will be 0, this increases the next_run time + * to priorize 2) above. + * + * As soon as a timed-out entry is found, move towards 1) and increase + * the scan frequency. + * In case we have lots of evictions next scan is done immediately. + */ ratio = scanned ? expired_count * 100 / scanned : 0; - if (ratio >= 90 || expired_count == GC_MAX_EVICTS) + if (ratio >= 90 || expired_count == GC_MAX_EVICTS) { + gc_work->next_gc_run = 0; next_run = 0; + } else if (expired_count) { + gc_work->next_gc_run /= 2U; + next_run = msecs_to_jiffies(1); + } else { + if (gc_work->next_gc_run < GC_INTERVAL_MAX) + gc_work->next_gc_run += msecs_to_jiffies(1); + + next_run = gc_work->next_gc_run; + } gc_work->last_bucket = i; - schedule_delayed_work(&gc_work->dwork, next_run); + queue_delayed_work(system_long_wq, &gc_work->dwork, next_run); } static void conntrack_gc_work_init(struct conntrack_gc_work *gc_work) { INIT_DELAYED_WORK(&gc_work->dwork, gc_worker); + gc_work->next_gc_run = GC_INTERVAL_MAX; gc_work->exiting = false; } @@ -1885,7 +1918,7 @@ int nf_conntrack_init_start(void) nf_ct_untracked_status_or(IPS_CONFIRMED | IPS_UNTRACKED); conntrack_gc_work_init(&conntrack_gc_work); - schedule_delayed_work(&conntrack_gc_work.dwork, GC_INTERVAL); + queue_delayed_work(system_long_wq, &conntrack_gc_work.dwork, GC_INTERVAL_MAX); return 0; -- cgit From 58c78e104d937c1f560fb10ed9bb2dcde0db4fcf Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sun, 6 Nov 2016 14:40:01 +0800 Subject: netfilter: nf_tables: fix oops when inserting an element into a verdict map Dalegaard says: The following ruleset, when loaded with 'nft -f bad.txt' ----snip---- flush ruleset table ip inlinenat { map sourcemap { type ipv4_addr : verdict; } chain postrouting { ip saddr vmap @sourcemap accept } } add chain inlinenat test add element inlinenat sourcemap { 100.123.10.2 : jump test } ----snip---- results in a kernel oops: BUG: unable to handle kernel paging request at 0000000000001344 IP: [] nf_tables_check_loops+0x114/0x1f0 [nf_tables] [...] Call Trace: [] ? nft_data_init+0x13e/0x1a0 [nf_tables] [] nft_validate_register_store+0x60/0xb0 [nf_tables] [] nft_add_set_elem+0x545/0x5e0 [nf_tables] [] ? nft_table_lookup+0x30/0x60 [nf_tables] [] ? nla_strcmp+0x40/0x50 [] nf_tables_newsetelem+0x11e/0x210 [nf_tables] [] ? nla_validate+0x60/0x80 [] nfnetlink_rcv+0x354/0x5a7 [nfnetlink] Because we forget to fill the net pointer in bind_ctx, so dereferencing it may cause kernel crash. Reported-by: Dalegaard Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 7d6a626b08f1..026581b04ea8 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -3568,6 +3568,7 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, dreg = nft_type_to_reg(set->dtype); list_for_each_entry(binding, &set->bindings, list) { struct nft_ctx bind_ctx = { + .net = ctx->net, .afi = ctx->afi, .table = ctx->table, .chain = (struct nft_chain *)binding->chain, -- cgit From 69e2d1e6c0af0dd7f18cfd434b008844568641a9 Mon Sep 17 00:00:00 2001 From: Varun Prakash Date: Sat, 5 Nov 2016 21:49:28 +0530 Subject: scsi: libcxgbi: fix incorrect DDP resource cleanup Before calling task_release_itt() task data is memset to zero because of which DDP context information is lost resulting in incorrect DDP resource cleanup, to fix this call task_release_itt() before memset. Signed-off-by: Varun Prakash Signed-off-by: Martin K. Petersen --- drivers/scsi/cxgbi/libcxgbi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c index d1421139e6ea..2ffe029ff2b6 100644 --- a/drivers/scsi/cxgbi/libcxgbi.c +++ b/drivers/scsi/cxgbi/libcxgbi.c @@ -2081,9 +2081,10 @@ void cxgbi_cleanup_task(struct iscsi_task *task) /* never reached the xmit task callout */ if (tdata->skb) __kfree_skb(tdata->skb); - memset(tdata, 0, sizeof(*tdata)); task_release_itt(task, task->hdr_itt); + memset(tdata, 0, sizeof(*tdata)); + iscsi_tcp_cleanup_task(task); } EXPORT_SYMBOL_GPL(cxgbi_cleanup_task); -- cgit From 04dfaa53a0b6e66b328a5bc549e3af8f8b6eac02 Mon Sep 17 00:00:00 2001 From: Mauricio Faria de Oliveira Date: Mon, 7 Nov 2016 17:53:30 -0200 Subject: scsi: qla2xxx: do not queue commands when unloading When the driver is unloading, in qla2x00_remove_one(), there is a single call/point in time to abort ongoing commands, qla2x00_abort_all_cmds(), which is still several steps away from the call to scsi_remove_host(). If more commands continue to arrive and be processed during that interval, when the driver is tearing down and releasing its structures, it might potentially hit an oops due to invalid memory access: Unable to handle kernel paging request for data at address 0x00000138 <...> NIP [d000000004700a40] qla2xxx_queuecommand+0x80/0x3f0 [qla2xxx] LR [d000000004700a10] qla2xxx_queuecommand+0x50/0x3f0 [qla2xxx] So, fail commands in qla2xxx_queuecommand() if the UNLOADING bit is set. Signed-off-by: Mauricio Faria de Oliveira Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 4d99c3b37687..e5db47443668 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -707,6 +707,11 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) srb_t *sp; int rval; + if (unlikely(test_bit(UNLOADING, &base_vha->dpc_flags))) { + cmd->result = DID_NO_CONNECT << 16; + goto qc24_fail_command; + } + if (ha->flags.eeh_busy) { if (ha->flags.pci_channel_io_perm_failure) { ql_dbg(ql_dbg_aer, vha, 0x9010, -- cgit From 1535aa75a3d8320374f82d198e3900d5b0969d7e Mon Sep 17 00:00:00 2001 From: Mauricio Faria de Oliveira Date: Mon, 7 Nov 2016 17:53:31 -0200 Subject: scsi: qla2xxx: fix invalid DMA access after command aborts in PCI device remove If a command is aborted in the kernel but not in the adapter, it might be considered complete and its DMA memory released, but it is still alive in the adapter, which will trigger an invalid DMA access upon its completion (in the DMA operations to deliver the command response to the driver). On powerpc platforms with IOMMU/EEH capabilities, the problem is observed during PCI device removal with ongoing IO requests -- which might trigger an EEH event very often, pointing to a 'TCE Request Page Access Error'. In that path, which is qla2x00_remove_one(), the commands are aborted in qla2x00_abort_all_cmds(), which does not perform an abort in the adapter as is done in qla2xxx_eh_abort() for example. So, this patch changes qla2x00_abort_all_cmds() to abort commands in the adapter too, with a call to qla2xxx_eh_abort(), which already implements all the logic to submit abort requests and handle responses. Reported-by: Naresh Bannoth Signed-off-by: Mauricio Faria de Oliveira Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index e5db47443668..567fa080e261 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1456,6 +1456,15 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) { sp = req->outstanding_cmds[cnt]; if (sp) { + /* Get a reference to the sp and drop the lock. + * The reference ensures this sp->done() call + * - and not the call in qla2xxx_eh_abort() - + * ends the SCSI command (with result 'res'). + */ + sp_get(sp); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + qla2xxx_eh_abort(GET_CMD_SP(sp)); + spin_lock_irqsave(&ha->hardware_lock, flags); req->outstanding_cmds[cnt] = NULL; sp->done(vha, sp, res); } -- cgit From 5ced937b7d8dae2c6a536112abaad6352769a931 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 8 Nov 2016 17:04:10 +0100 Subject: drm/imx: disable planes before DC If the DC clock is disabled before the attached IDMACs are properly stopped the IDMACs may hang the IPU or even the whole system. Make sure the IDMACs are in safe state by disabling the planes before removal of the DC clock. Also set the atomic parameter to false to stop calling the atomic_begin hook, which does nothing useful as we immediately afterwards turn off vblank interrupts and possibly send the pending vblank event. Fixes: 33f14235302f (drm/imx: atomic phase 1: Use transitional atomic CRTC and plane helpers) Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-crtc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c index 4e1ae3fc462d..6be515a9fb69 100644 --- a/drivers/gpu/drm/imx/ipuv3-crtc.c +++ b/drivers/gpu/drm/imx/ipuv3-crtc.c @@ -68,6 +68,12 @@ static void ipu_crtc_atomic_disable(struct drm_crtc *crtc, ipu_dc_disable_channel(ipu_crtc->dc); ipu_di_disable(ipu_crtc->di); + /* + * Planes must be disabled before DC clock is removed, as otherwise the + * attached IDMACs will be left in undefined state, possibly hanging + * the IPU or even system. + */ + drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, false); ipu_dc_disable(ipu); spin_lock_irq(&crtc->dev->event_lock); @@ -77,9 +83,6 @@ static void ipu_crtc_atomic_disable(struct drm_crtc *crtc, } spin_unlock_irq(&crtc->dev->event_lock); - /* always disable planes on the CRTC */ - drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, true); - drm_crtc_vblank_off(crtc); } -- cgit From 9cba9844547731d2f14d79485c43192ffaa37b76 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 25 Oct 2016 01:21:10 +0900 Subject: perf hist browser: Fix hierarchy column counts The perf report/top on TUI supports horizontal scrolling using LEFT and RIGHT keys. But it calculate the number of columns incorrectly when hierarchy mode is enabled so that keep pressing RIGHT key can make the output disappeared. In the hierarchy mode, all sort keys are collapsed into a single column, so it needs to be applied when calculating column numbers. Reported-and-Tested-by: Markus Trippelsdorf Signed-off-by: Namhyung Kim Tested-by: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20161024162110.17918-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/ui/browsers/hists.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c index 4ffff7be9299..5adedc1a09d3 100644 --- a/tools/perf/ui/browsers/hists.c +++ b/tools/perf/ui/browsers/hists.c @@ -2076,8 +2076,21 @@ void hist_browser__init(struct hist_browser *browser, browser->b.use_navkeypressed = true; browser->show_headers = symbol_conf.show_hist_headers; - hists__for_each_format(hists, fmt) + if (symbol_conf.report_hierarchy) { + struct perf_hpp_list_node *fmt_node; + + /* count overhead columns (in the first node) */ + fmt_node = list_first_entry(&hists->hpp_formats, + struct perf_hpp_list_node, list); + perf_hpp_list__for_each_format(&fmt_node->hpp, fmt) + ++browser->b.columns; + + /* add a single column for whole hierarchy sort keys*/ ++browser->b.columns; + } else { + hists__for_each_format(hists, fmt) + ++browser->b.columns; + } hists__reset_column_width(hists); } -- cgit From 3d9f4683929a968dc9b9493f4e608b109ad292a2 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 8 Nov 2016 22:08:30 +0900 Subject: perf hists browser: Fix indentation of folded sign on --hierarchy It should indent 2 spaces for folded sign and a whitespace. Signed-off-by: Namhyung Kim Tested-by: Markus Trippelsdorf Cc: Jiri Olsa Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20161108130833.9263-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/ui/browsers/hists.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c index 5adedc1a09d3..225ef2a15a13 100644 --- a/tools/perf/ui/browsers/hists.c +++ b/tools/perf/ui/browsers/hists.c @@ -1337,8 +1337,8 @@ static int hist_browser__show_hierarchy_entry(struct hist_browser *browser, } if (first) { - ui_browser__printf(&browser->b, "%c", folded_sign); - width--; + ui_browser__printf(&browser->b, "%c ", folded_sign); + width -= 2; first = false; } else { ui_browser__printf(&browser->b, " "); @@ -1555,7 +1555,7 @@ static int hists_browser__scnprintf_hierarchy_headers(struct hist_browser *brows int indent = hists->nr_hpp_node - 2; bool first_node, first_col; - ret = scnprintf(buf, size, " "); + ret = scnprintf(buf, size, " "); if (advance_hpp_check(&dummy_hpp, ret)) return ret; -- cgit From 131d51eb1d17aac3a604cf929fd99ff4dd34f495 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 8 Nov 2016 22:08:31 +0900 Subject: perf hists browser: Show folded sign properly on --hierarchy When horizontal scrolling is used in hierarchy mode, the folded signed disappears at the right most column. Committer note: To test it, run 'perf top --hierarchy, see the '+' symbol at the first column, then press the right arrow key, the '+' symbol will disappear, this patch fixes that. Signed-off-by: Namhyung Kim Tested-by: Arnaldo Carvalho de Melo Tested-by: Markus Trippelsdorf Cc: Jiri Olsa Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20161108130833.9263-3-namhyung@kernel.org [ Move 'width -= 2' invariant to right after the if/else ] Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/ui/browsers/hists.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c index 225ef2a15a13..e767fbd17ad2 100644 --- a/tools/perf/ui/browsers/hists.c +++ b/tools/perf/ui/browsers/hists.c @@ -1381,7 +1381,13 @@ static int hist_browser__show_hierarchy_entry(struct hist_browser *browser, } perf_hpp_list__for_each_format(entry->hpp_list, fmt) { - ui_browser__write_nstring(&browser->b, "", 2); + if (first) { + ui_browser__printf(&browser->b, "%c ", folded_sign); + first = false; + } else { + ui_browser__write_nstring(&browser->b, "", 2); + } + width -= 2; /* -- cgit From b9bf911e990a189f89147ee6b66660a153ed0125 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 8 Nov 2016 22:08:32 +0900 Subject: perf hists browser: Fix column indentation on --hierarchy When horizontall scrolling is used in hierarchy mode, the the right most column has unnecessary indentation. Actually it's needed only if some of left (overhead) columns were shown. Signed-off-by: Namhyung Kim Tested-by: Arnaldo Carvalho de Melo Tested-by: Markus Trippelsdorf Cc: Jiri Olsa Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20161108130833.9263-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/ui/browsers/hists.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c index e767fbd17ad2..a53fef0c673b 100644 --- a/tools/perf/ui/browsers/hists.c +++ b/tools/perf/ui/browsers/hists.c @@ -1361,8 +1361,10 @@ static int hist_browser__show_hierarchy_entry(struct hist_browser *browser, width -= hpp.buf - s; } - ui_browser__write_nstring(&browser->b, "", hierarchy_indent); - width -= hierarchy_indent; + if (!first) { + ui_browser__write_nstring(&browser->b, "", hierarchy_indent); + width -= hierarchy_indent; + } if (column >= browser->b.horiz_scroll) { char s[2048]; @@ -1565,6 +1567,7 @@ static int hists_browser__scnprintf_hierarchy_headers(struct hist_browser *brows if (advance_hpp_check(&dummy_hpp, ret)) return ret; + first_node = true; /* the first hpp_list_node is for overhead columns */ fmt_node = list_first_entry(&hists->hpp_formats, struct perf_hpp_list_node, list); @@ -1579,12 +1582,16 @@ static int hists_browser__scnprintf_hierarchy_headers(struct hist_browser *brows ret = scnprintf(dummy_hpp.buf, dummy_hpp.size, " "); if (advance_hpp_check(&dummy_hpp, ret)) break; + + first_node = false; } - ret = scnprintf(dummy_hpp.buf, dummy_hpp.size, "%*s", - indent * HIERARCHY_INDENT, ""); - if (advance_hpp_check(&dummy_hpp, ret)) - return ret; + if (!first_node) { + ret = scnprintf(dummy_hpp.buf, dummy_hpp.size, "%*s", + indent * HIERARCHY_INDENT, ""); + if (advance_hpp_check(&dummy_hpp, ret)) + return ret; + } first_node = true; list_for_each_entry_continue(fmt_node, &hists->hpp_formats, list) { -- cgit From c72ab446cac1d6c9551fd26c4cfef1b2fc5041fd Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 8 Nov 2016 22:08:33 +0900 Subject: perf hists: Fix column length on --hierarchy Markus reported that there's a weird behavior on perf top --hierarchy regarding the column length. Looking at the code, I found a dubious code which affects the symptoms. When --hierarchy option is used, the last column length might be inaccurate since it skips to update the length on leaf entries. I cannot remember why it did and looks like a leftover from previous version during the development. Anyway, updating the column length often is not harmful. So let's move the code out. Reported-and-Tested-by: Markus Trippelsdorf Signed-off-by: Namhyung Kim Cc: Jiri Olsa Cc: Peter Zijlstra Fixes: 1a3906a7e6b9 ("perf hists: Resort hist entries with hierarchy") Link: http://lkml.kernel.org/r/20161108130833.9263-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/hist.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c index b02992efb513..a69f027368ef 100644 --- a/tools/perf/util/hist.c +++ b/tools/perf/util/hist.c @@ -1600,18 +1600,18 @@ static void hists__hierarchy_output_resort(struct hists *hists, if (prog) ui_progress__update(prog, 1); + hists->nr_entries++; + if (!he->filtered) { + hists->nr_non_filtered_entries++; + hists__calc_col_len(hists, he); + } + if (!he->leaf) { hists__hierarchy_output_resort(hists, prog, &he->hroot_in, &he->hroot_out, min_callchain_hits, use_callchain); - hists->nr_entries++; - if (!he->filtered) { - hists->nr_non_filtered_entries++; - hists__calc_col_len(hists, he); - } - continue; } -- cgit From b0b6e86846093c5f8820386bc01515f857dd8faa Mon Sep 17 00:00:00 2001 From: Yazen Ghannam Date: Tue, 8 Nov 2016 09:35:06 +0100 Subject: x86/cpu/AMD: Fix cpu_llc_id for AMD Fam17h systems cpu_llc_id (Last Level Cache ID) derivation on AMD Fam17h has an underflow bug when extracting the socket_id value. It starts from 0 so subtracting 1 from it will result in an invalid value. This breaks scheduling topology later on since the cpu_llc_id will be incorrect. For example, the the cpu_llc_id of the *other* CPU in the loops in set_cpu_sibling_map() underflows and we're generating the funniest thread_siblings masks and then when I run 8 threads of nbench, they get spread around the LLC domains in a very strange pattern which doesn't give you the normal scheduling spread one would expect for performance. Other things like EDAC use cpu_llc_id so they will be b0rked too. So, the APIC ID is preset in APICx020 for bits 3 and above: they contain the core complex, node and socket IDs. The LLC is at the core complex level so we can find a unique cpu_llc_id by right shifting the APICID by 3 because then the least significant bit will be the Core Complex ID. Tested-by: Borislav Petkov Signed-off-by: Yazen Ghannam [ Cleaned up and extended the commit message. ] Signed-off-by: Borislav Petkov Acked-by: Thomas Gleixner Cc: # v4.4.. Cc: Aravind Gopalakrishnan Cc: Linus Torvalds Cc: Peter Zijlstra Fixes: 3849e91f571d ("x86/AMD: Fix last level cache topology for AMD Fam17h systems") Link: http://lkml.kernel.org/r/20161108083506.rvqb5h4chrcptj7d@pd.tnic Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/amd.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index b81fe2d63e15..1e81a37c034e 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -347,7 +347,6 @@ static void amd_detect_cmp(struct cpuinfo_x86 *c) #ifdef CONFIG_SMP unsigned bits; int cpu = smp_processor_id(); - unsigned int socket_id, core_complex_id; bits = c->x86_coreid_bits; /* Low order bits define the core id (index of core in socket) */ @@ -365,10 +364,7 @@ static void amd_detect_cmp(struct cpuinfo_x86 *c) if (c->x86 != 0x17 || !cpuid_edx(0x80000006)) return; - socket_id = (c->apicid >> bits) - 1; - core_complex_id = (c->apicid & ((1 << bits) - 1)) >> 3; - - per_cpu(cpu_llc_id, cpu) = (socket_id << 3) | core_complex_id; + per_cpu(cpu_llc_id, cpu) = c->apicid >> 3; #endif } -- cgit From 5e5ec1759dd663a1d5a2f10930224dd009e500e8 Mon Sep 17 00:00:00 2001 From: Sumit Saxena Date: Wed, 9 Nov 2016 02:59:42 -0800 Subject: scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression This patch will fix regression caused by commit 1e793f6fc0db ("scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices"). The problem was that the MEGASAS_IS_LOGICAL macro did not have braces and as a result the driver ended up exposing a lot of non-existing SCSI devices (all SCSI commands to channels 1,2,3 were returned as SUCCESS-DID_OK by driver). [mkp: clarified patch description] Fixes: 1e793f6fc0db920400574211c48f9157a37e3945 Reported-by: Jens Axboe CC: stable@vger.kernel.org Signed-off-by: Kashyap Desai Signed-off-by: Sumit Saxena Tested-by: Sumit Saxena Reviewed-by: Tomas Henzl Tested-by: Jens Axboe Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index ca86c885dfaa..3aaea713bf37 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -2233,7 +2233,7 @@ struct megasas_instance_template { }; #define MEGASAS_IS_LOGICAL(scp) \ - (scp->device->channel < MEGASAS_MAX_PD_CHANNELS) ? 0 : 1 + ((scp->device->channel < MEGASAS_MAX_PD_CHANNELS) ? 0 : 1) #define MEGASAS_DEV_INDEX(scp) \ (((scp->device->channel % 2) * MEGASAS_MAX_DEV_PER_CHANNEL) + \ -- cgit From aa5fd0fb77486b8a6764ead8627baa14790e4280 Mon Sep 17 00:00:00 2001 From: Gao Feng Date: Fri, 4 Nov 2016 10:28:49 +0800 Subject: driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed. When there is no existing macvlan port in lowdev, one new macvlan port would be created. But it doesn't be destoried when something failed later. It casues some memleak. Now add one flag to indicate if new macvlan port is created. Signed-off-by: Gao Feng Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 3234fcdea317..d2d6f12a112f 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -1278,6 +1278,7 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, struct net_device *lowerdev; int err; int macmode; + bool create = false; if (!tb[IFLA_LINK]) return -EINVAL; @@ -1304,12 +1305,18 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, err = macvlan_port_create(lowerdev); if (err < 0) return err; + create = true; } port = macvlan_port_get_rtnl(lowerdev); /* Only 1 macvlan device can be created in passthru mode */ - if (port->passthru) - return -EINVAL; + if (port->passthru) { + /* The macvlan port must be not created this time, + * still goto destroy_macvlan_port for readability. + */ + err = -EINVAL; + goto destroy_macvlan_port; + } vlan->lowerdev = lowerdev; vlan->dev = dev; @@ -1325,24 +1332,28 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, vlan->flags = nla_get_u16(data[IFLA_MACVLAN_FLAGS]); if (vlan->mode == MACVLAN_MODE_PASSTHRU) { - if (port->count) - return -EINVAL; + if (port->count) { + err = -EINVAL; + goto destroy_macvlan_port; + } port->passthru = true; eth_hw_addr_inherit(dev, lowerdev); } if (data && data[IFLA_MACVLAN_MACADDR_MODE]) { - if (vlan->mode != MACVLAN_MODE_SOURCE) - return -EINVAL; + if (vlan->mode != MACVLAN_MODE_SOURCE) { + err = -EINVAL; + goto destroy_macvlan_port; + } macmode = nla_get_u32(data[IFLA_MACVLAN_MACADDR_MODE]); err = macvlan_changelink_sources(vlan, macmode, data); if (err) - return err; + goto destroy_macvlan_port; } err = register_netdevice(dev); if (err < 0) - return err; + goto destroy_macvlan_port; dev->priv_flags |= IFF_MACVLAN; err = netdev_upper_dev_link(lowerdev, dev); @@ -1357,7 +1368,9 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, unregister_netdev: unregister_netdevice(dev); - +destroy_macvlan_port: + if (create) + macvlan_port_destroy(port->dev); return err; } EXPORT_SYMBOL_GPL(macvlan_common_newlink); -- cgit From 3023898b7d4aac65987bd2f485cc22390aae6f78 Mon Sep 17 00:00:00 2001 From: Soheil Hassas Yeganeh Date: Fri, 4 Nov 2016 15:36:49 -0400 Subject: sock: fix sendmmsg for partial sendmsg MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Do not send the next message in sendmmsg for partial sendmsg invocations. sendmmsg assumes that it can continue sending the next message when the return value of the individual sendmsg invocations is positive. It results in corrupting the data for TCP, SCTP, and UNIX streams. For example, sendmmsg([["abcd"], ["efgh"]]) can result in a stream of "aefgh" if the first sendmsg invocation sends only the first byte while the second sendmsg goes through. Datagram sockets either send the entire datagram or fail, so this patch affects only sockets of type SOCK_STREAM and SOCK_SEQPACKET. Fixes: 228e548e6020 ("net: Add sendmmsg socket system call") Signed-off-by: Soheil Hassas Yeganeh Signed-off-by: Eric Dumazet Signed-off-by: Willem de Bruijn Signed-off-by: Neal Cardwell Acked-by: Maciej Żenczykowski Signed-off-by: David S. Miller --- net/socket.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/socket.c b/net/socket.c index 5a9bf5ee2464..272518b087c8 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2038,6 +2038,8 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, if (err) break; ++datagrams; + if (msg_data_left(&msg_sys)) + break; cond_resched(); } -- cgit From fb56be83e43d0bb0cc9e8c35a6a9cac853231ba2 Mon Sep 17 00:00:00 2001 From: Maciej Żenczykowski Date: Fri, 4 Nov 2016 14:51:54 -0700 Subject: net-ipv6: on device mtu change do not add mtu to mtu-less routes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Routes can specify an mtu explicitly or inherit the mtu from the underlying device - this inheritance is implemented in dst->ops->mtu handlers ip6_mtu() and ip6_blackhole_mtu(). Currently changing the mtu of a device adds mtu explicitly to routes using that device. ie. # ip link set dev lo mtu 65536 # ip -6 route add local 2000::1 dev lo # ip -6 route get 2000::1 local 2000::1 dev lo table local src ... metric 1024 pref medium # ip link set dev lo mtu 65535 # ip -6 route get 2000::1 local 2000::1 dev lo table local src ... metric 1024 mtu 65535 pref medium # ip link set dev lo mtu 65536 # ip -6 route get 2000::1 local 2000::1 dev lo table local src ... metric 1024 mtu 65536 pref medium # ip -6 route del local 2000::1 After this patch the route entry no longer changes unless it already has an mtu. There is no need: this inheritance is already done in ip6_mtu() # ip link set dev lo mtu 65536 # ip -6 route add local 2000::1 dev lo # ip -6 route add local 2000::2 dev lo mtu 2000 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 2000 pref medium # ip link set dev lo mtu 65535 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 2000 pref medium # ip link set dev lo mtu 1501 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 1501 pref medium # ip link set dev lo mtu 65536 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 65536 pref medium # ip -6 route del local 2000::1 # ip -6 route del local 2000::2 This is desirable because changing device mtu and then resetting it to the previous value shouldn't change the user visible routing table. Signed-off-by: Maciej Żenczykowski CC: Eric Dumazet Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv6/route.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 7403d90dcb38..1b57e11e6e0d 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2761,6 +2761,7 @@ static int rt6_mtu_change_route(struct rt6_info *rt, void *p_arg) PMTU discouvery. */ if (rt->dst.dev == arg->dev && + dst_metric_raw(&rt->dst, RTAX_MTU) && !dst_metric_locked(&rt->dst, RTAX_MTU)) { if (rt->rt6i_flags & RTF_CACHE) { /* For RTF_CACHE with rt6i_pmtu == 0 -- cgit From f91d718156fe93d0cf684cacf5f247c35a825d79 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Sun, 6 Nov 2016 18:05:06 +0200 Subject: Revert "net/mlx4_en: Fix panic during reboot" This reverts commit 9d2afba058722d40cc02f430229c91611c0e8d16. The original issue would possibly exist if an external module tried calling our "ethtool_ops" without checking if it still exists. The right way of solving it is by simply doing the check in the caller side. Currently, no action is required as there's no such use case. Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 12c99a2655f2..3a47e83d3e07 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2202,7 +2202,6 @@ void mlx4_en_destroy_netdev(struct net_device *dev) if (!shutdown) free_netdev(dev); - dev->ethtool_ops = NULL; } static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu) -- cgit From d667f78514c656a6a8bf0b3d6134a7fe5cd4d317 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Mon, 7 Nov 2016 17:57:56 +0800 Subject: bna: Add synchronization for tx ring. We received two reports of BUG_ON in bnad_txcmpl_process() where hw_consumer_index appeared to be ahead of producer_index. Out of order write/read of these variables could explain these reports. bnad_start_xmit(), as a producer of tx descriptors, has a few memory barriers sprinkled around writes to producer_index and the device's doorbell but they're not paired with anything in bnad_txcmpl_process(), a consumer. Since we are synchronizing with a device, we must use mandatory barriers, not smp_*. Also, I didn't see the purpose of the last smp_mb() in bnad_start_xmit(). Signed-off-by: Benjamin Poirier Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c index f9df4b5ae90e..f42f672b0e7e 100644 --- a/drivers/net/ethernet/brocade/bna/bnad.c +++ b/drivers/net/ethernet/brocade/bna/bnad.c @@ -177,6 +177,7 @@ bnad_txcmpl_process(struct bnad *bnad, struct bna_tcb *tcb) return 0; hw_cons = *(tcb->hw_consumer_index); + rmb(); cons = tcb->consumer_index; q_depth = tcb->q_depth; @@ -3094,7 +3095,7 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev) BNA_QE_INDX_INC(prod, q_depth); tcb->producer_index = prod; - smp_mb(); + wmb(); if (unlikely(!test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags))) return NETDEV_TX_OK; @@ -3102,7 +3103,6 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev) skb_tx_timestamp(skb); bna_txq_prod_indx_doorbell(tcb); - smp_mb(); return NETDEV_TX_OK; } -- cgit From cdb26d3387f0cdf7b2a2eea581385173547ef21f Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Mon, 7 Nov 2016 13:53:27 +0100 Subject: net: bgmac: fix reversed checks for clock control flag MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes regression introduced by patch adding feature flags. It was already reported and patch followed (it got accepted) but it appears it was incorrect. Instead of fixing reversed condition it broke a good one. This patch was verified to actually fix SoC hanges caused by bgmac on BCM47186B0. Fixes: db791eb2970b ("net: ethernet: bgmac: convert to feature flags") Fixes: 4af1474e6198 ("net: bgmac: Fix errant feature flag check") Cc: Jon Mason Signed-off-by: Rafał Miłecki Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 91cbf92de971..49f4cafe5438 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -1049,9 +1049,9 @@ static void bgmac_enable(struct bgmac *bgmac) mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> BGMAC_DS_MM_SHIFT; - if (!(bgmac->feature_flags & BGMAC_FEAT_CLKCTLST) || mode != 0) + if (bgmac->feature_flags & BGMAC_FEAT_CLKCTLST || mode != 0) bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); - if (bgmac->feature_flags & BGMAC_FEAT_CLKCTLST && mode == 2) + if (!(bgmac->feature_flags & BGMAC_FEAT_CLKCTLST) && mode == 2) bgmac_cco_ctl_maskset(bgmac, 1, ~0, BGMAC_CHIPCTL_1_RXC_DLL_BYPASS); -- cgit From d49597fd3bc7d9534de55e9256767f073be1b33a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 9 Nov 2016 16:35:51 +0100 Subject: x86/cpu: Deal with broken firmware (VMWare/XEN) Both ACPI and MP specifications require that the APIC id in the respective tables must be the same as the APIC id in CPUID. The kernel retrieves the physical package id from the APIC id during the ACPI/MP table scan and builds the physical to logical package map. The physical package id which is used after a CPU comes up is retrieved from CPUID. So we rely on ACPI/MP tables and CPUID agreeing in that respect. There exist VMware and XEN implementations which violate the spec. As a result the physical to logical package map, which relies on the ACPI/MP tables does not work on those systems, because the CPUID initialized physical package id does not match the firmware id. This causes system crashes and malfunction due to invalid package mappings. The only way to cure this is to sanitize the physical package id after the CPUID enumeration and yell when the APIC ids are different. Fix up the initial APIC id, which is fine as it is only used printout purposes. If the physical package IDs differ yell and use the package information from the ACPI/MP tables so the existing logical package map just works. Chas provided the resulting dmesg output for his affected 4 virtual sockets, 1 core per socket VM: [Firmware Bug]: CPU1: APIC id mismatch. Firmware: 1 CPUID: 2 [Firmware Bug]: CPU1: Using firmware package id 1 instead of 2 .... Reported-and-tested-by: "Charles (Chas) Williams" , Reported-by: M. Vefa Bicakci Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Sebastian Andrzej Siewior Cc: Borislav Petkov Cc: Alok Kataria Cc: Boris Ostrovsky Cc: #4.6+ Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1611091613540.3501@nanos Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/common.c | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 9bd910a7dd0a..cc9e980c68ec 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -978,6 +978,35 @@ static void x86_init_cache_qos(struct cpuinfo_x86 *c) } } +/* + * The physical to logical package id mapping is initialized from the + * acpi/mptables information. Make sure that CPUID actually agrees with + * that. + */ +static void sanitize_package_id(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned int pkg, apicid, cpu = smp_processor_id(); + + apicid = apic->cpu_present_to_apicid(cpu); + pkg = apicid >> boot_cpu_data.x86_coreid_bits; + + if (apicid != c->initial_apicid) { + pr_err(FW_BUG "CPU%u: APIC id mismatch. Firmware: %x CPUID: %x\n", + cpu, apicid, c->initial_apicid); + c->initial_apicid = apicid; + } + if (pkg != c->phys_proc_id) { + pr_err(FW_BUG "CPU%u: Using firmware package id %u instead of %u\n", + cpu, pkg, c->phys_proc_id); + c->phys_proc_id = pkg; + } + c->logical_proc_id = topology_phys_to_logical_pkg(pkg); +#else + c->logical_proc_id = 0; +#endif +} + /* * This does the hard work of actually picking apart the CPU stuff... */ @@ -1103,8 +1132,7 @@ static void identify_cpu(struct cpuinfo_x86 *c) #ifdef CONFIG_NUMA numa_add_cpu(smp_processor_id()); #endif - /* The boot/hotplug time assigment got cleared, restore it */ - c->logical_proc_id = topology_phys_to_logical_pkg(c->phys_proc_id); + sanitize_package_id(c); } /* -- cgit From 1571875beecd5de9657f73931449bda1b1329b6f Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 3 Nov 2016 16:21:26 +0200 Subject: ACPI / platform: Add support for build-in properties MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We have a couple of drivers, acpi_apd.c and acpi_lpss.c, that need to pass extra build-in properties to the devices they create. Previously the drivers added those properties to the struct device which is member of the struct acpi_device, but that does not work. Those properties need to be assigned to the struct device of the platform device instead in order for them to become available to the drivers. To fix this, this patch changes acpi_create_platform_device function to take struct property_entry pointer as parameter. Fixes: 20a875e2e86e (serial: 8250_dw: Add quirk for APM X-Gene SoC) Signed-off-by: Heikki Krogerus Tested-by: Yazen Ghannam Tested-by: Jérôme de Bretagne Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_apd.c | 10 ++-------- drivers/acpi/acpi_lpss.c | 10 ++-------- drivers/acpi/acpi_platform.c | 5 ++++- drivers/acpi/dptf/int340x_thermal.c | 4 ++-- drivers/acpi/scan.c | 2 +- drivers/platform/x86/intel-hid.c | 2 +- drivers/platform/x86/intel-vbtn.c | 2 +- include/linux/acpi.h | 3 ++- 8 files changed, 15 insertions(+), 23 deletions(-) diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c index 5f112d811e42..5959ed996a75 100644 --- a/drivers/acpi/acpi_apd.c +++ b/drivers/acpi/acpi_apd.c @@ -117,7 +117,7 @@ static int acpi_apd_create_device(struct acpi_device *adev, int ret; if (!dev_desc) { - pdev = acpi_create_platform_device(adev); + pdev = acpi_create_platform_device(adev, NULL); return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1; } @@ -134,14 +134,8 @@ static int acpi_apd_create_device(struct acpi_device *adev, goto err_out; } - if (dev_desc->properties) { - ret = device_add_properties(&adev->dev, dev_desc->properties); - if (ret) - goto err_out; - } - adev->driver_data = pdata; - pdev = acpi_create_platform_device(adev); + pdev = acpi_create_platform_device(adev, dev_desc->properties); if (!IS_ERR_OR_NULL(pdev)) return 1; diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 552010288135..373657f7e35a 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -395,7 +395,7 @@ static int acpi_lpss_create_device(struct acpi_device *adev, dev_desc = (const struct lpss_device_desc *)id->driver_data; if (!dev_desc) { - pdev = acpi_create_platform_device(adev); + pdev = acpi_create_platform_device(adev, NULL); return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1; } pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); @@ -451,14 +451,8 @@ static int acpi_lpss_create_device(struct acpi_device *adev, goto err_out; } - if (dev_desc->properties) { - ret = device_add_properties(&adev->dev, dev_desc->properties); - if (ret) - goto err_out; - } - adev->driver_data = pdata; - pdev = acpi_create_platform_device(adev); + pdev = acpi_create_platform_device(adev, dev_desc->properties); if (!IS_ERR_OR_NULL(pdev)) { return 1; } diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c index 159f7f19abce..56e70da83c6c 100644 --- a/drivers/acpi/acpi_platform.c +++ b/drivers/acpi/acpi_platform.c @@ -33,6 +33,7 @@ static const struct acpi_device_id forbidden_id_list[] = { /** * acpi_create_platform_device - Create platform device for ACPI device node * @adev: ACPI device node to create a platform device for. + * @properties: Optional collection of build-in properties. * * Check if the given @adev can be represented as a platform device and, if * that's the case, create and register a platform device, populate its common @@ -40,7 +41,8 @@ static const struct acpi_device_id forbidden_id_list[] = { * * Name of the platform device will be the same as @adev's. */ -struct platform_device *acpi_create_platform_device(struct acpi_device *adev) +struct platform_device *acpi_create_platform_device(struct acpi_device *adev, + struct property_entry *properties) { struct platform_device *pdev = NULL; struct platform_device_info pdevinfo; @@ -88,6 +90,7 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *adev) pdevinfo.res = resources; pdevinfo.num_res = count; pdevinfo.fwnode = acpi_fwnode_handle(adev); + pdevinfo.properties = properties; if (acpi_dma_supported(adev)) pdevinfo.dma_mask = DMA_BIT_MASK(32); diff --git a/drivers/acpi/dptf/int340x_thermal.c b/drivers/acpi/dptf/int340x_thermal.c index 33505c651f62..86364097e236 100644 --- a/drivers/acpi/dptf/int340x_thermal.c +++ b/drivers/acpi/dptf/int340x_thermal.c @@ -34,11 +34,11 @@ static int int340x_thermal_handler_attach(struct acpi_device *adev, const struct acpi_device_id *id) { if (IS_ENABLED(CONFIG_INT340X_THERMAL)) - acpi_create_platform_device(adev); + acpi_create_platform_device(adev, NULL); /* Intel SoC DTS thermal driver needs INT3401 to set IRQ descriptor */ else if (IS_ENABLED(CONFIG_INTEL_SOC_DTS_THERMAL) && id->driver_data == INT3401_DEVICE) - acpi_create_platform_device(adev); + acpi_create_platform_device(adev, NULL); return 1; } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index ad9fc84a8601..3d31ae3a482d 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1734,7 +1734,7 @@ static void acpi_default_enumeration(struct acpi_device *device) &is_spi_i2c_slave); acpi_dev_free_resource_list(&resource_list); if (!is_spi_i2c_slave) { - acpi_create_platform_device(device); + acpi_create_platform_device(device, NULL); acpi_device_set_enumerated(device); } else { blocking_notifier_call_chain(&acpi_reconfig_chain, diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c index ed5874217ee7..12dbb5063376 100644 --- a/drivers/platform/x86/intel-hid.c +++ b/drivers/platform/x86/intel-hid.c @@ -264,7 +264,7 @@ check_acpi_dev(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK; if (acpi_match_device_ids(dev, ids) == 0) - if (acpi_create_platform_device(dev)) + if (acpi_create_platform_device(dev, NULL)) dev_info(&dev->dev, "intel-hid: created platform device\n"); diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c index 146d02f8c9bc..78080763df51 100644 --- a/drivers/platform/x86/intel-vbtn.c +++ b/drivers/platform/x86/intel-vbtn.c @@ -164,7 +164,7 @@ check_acpi_dev(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK; if (acpi_match_device_ids(dev, ids) == 0) - if (acpi_create_platform_device(dev)) + if (acpi_create_platform_device(dev, NULL)) dev_info(&dev->dev, "intel-vbtn: created platform device\n"); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 632ec16a855e..c09936f55166 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -546,7 +546,8 @@ int acpi_device_uevent_modalias(struct device *, struct kobj_uevent_env *); int acpi_device_modalias(struct device *, char *, int); void acpi_walk_dep_device_list(acpi_handle handle); -struct platform_device *acpi_create_platform_device(struct acpi_device *); +struct platform_device *acpi_create_platform_device(struct acpi_device *, + struct property_entry *); #define ACPI_PTR(_ptr) (_ptr) static inline void acpi_device_set_enumerated(struct acpi_device *adev) -- cgit From 3e884493448131179a5b7cae1ddca1028ffaecc8 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 7 Nov 2016 10:51:40 -0600 Subject: net: qcom/emac: configure the external phy to allow pause frames Pause frames are used to enable flow control. A MAC can send and receive pause frames in order to throttle traffic. However, the PHY must be configured to allow those frames to pass through. Reviewed-by: Florian Fainelli Signed-off-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac-mac.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c index 6fb3bee904d3..70a55dcc431d 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c @@ -1003,6 +1003,12 @@ int emac_mac_up(struct emac_adapter *adpt) writel((u32)~DIS_INT, adpt->base + EMAC_INT_STATUS); writel(adpt->irq.mask, adpt->base + EMAC_INT_MASK); + /* Enable pause frames. Without this feature, the EMAC has been shown + * to receive (and drop) frames with FCS errors at gigabit connections. + */ + adpt->phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause; + adpt->phydev->advertising |= SUPPORTED_Pause | SUPPORTED_Asym_Pause; + adpt->phydev->irq = PHY_IGNORE_INTERRUPT; phy_start(adpt->phydev); -- cgit From df63022e182de4041b65ae22df1950d3416b577e Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 7 Nov 2016 10:51:41 -0600 Subject: net: qcom/emac: enable flow control if requested If the PHY has been configured to allow pause frames, then the MAC should be configured to generate and/or accept those frames. Signed-off-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac-mac.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c index 70a55dcc431d..0b4deb31e742 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c @@ -575,10 +575,11 @@ void emac_mac_start(struct emac_adapter *adpt) mac |= TXEN | RXEN; /* enable RX/TX */ - /* We don't have ethtool support yet, so force flow-control mode - * to 'full' always. - */ - mac |= TXFC | RXFC; + /* Configure MAC flow control to match the PHY's settings. */ + if (phydev->pause) + mac |= RXFC; + if (phydev->pause != phydev->asym_pause) + mac |= TXFC; /* setup link speed */ mac &= ~SPEED_MASK; -- cgit From 9d1a6c4ea43e48c7880c85971c17939b56832d8a Mon Sep 17 00:00:00 2001 From: David Ahern Date: Mon, 7 Nov 2016 12:03:09 -0800 Subject: net: icmp_route_lookup should use rt dev to determine L3 domain icmp_send is called in response to some event. The skb may not have the device set (skb->dev is NULL), but it is expected to have an rt. Update icmp_route_lookup to use the rt on the skb to determine L3 domain. Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX") Signed-off-by: David Ahern Signed-off-by: David S. Miller --- net/ipv4/icmp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c index 38abe70e595f..48734ee6293f 100644 --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -477,7 +477,7 @@ static struct rtable *icmp_route_lookup(struct net *net, fl4->flowi4_proto = IPPROTO_ICMP; fl4->fl4_icmp_type = type; fl4->fl4_icmp_code = code; - fl4->flowi4_oif = l3mdev_master_ifindex(skb_in->dev); + fl4->flowi4_oif = l3mdev_master_ifindex(skb_dst(skb_in)->dev); security_skb_classify_flow(skb_in, flowi4_to_flowi(fl4)); rt = __ip_route_output_key_hash(net, fl4, @@ -502,7 +502,7 @@ static struct rtable *icmp_route_lookup(struct net *net, if (err) goto relookup_failed; - if (inet_addr_type_dev_table(net, skb_in->dev, + if (inet_addr_type_dev_table(net, skb_dst(skb_in)->dev, fl4_dec.saddr) == RTN_LOCAL) { rt2 = __ip_route_output_key(net, &fl4_dec); if (IS_ERR(rt2)) -- cgit From 6dbcd8fb5968fda3a5fba019dfb0c80c3139627b Mon Sep 17 00:00:00 2001 From: John Allen Date: Mon, 7 Nov 2016 14:27:28 -0600 Subject: ibmvnic: Start completion queue negotiation at server-provided optimum values Use the opt_* fields to determine the starting point for negotiating the number of tx/rx completion queues with the vnic server. These contain the number of queues that the vnic server estimates that it will be able to allocate. While renegotiation may still occur, using the opt_* fields will reduce the number of times this needs to happen and will prevent driver probe timeout on systems using large numbers of ibmvnic client devices per vnic port. Signed-off-by: John Allen Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 5f44c5520fbc..f6c9b6d38ac7 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1505,9 +1505,8 @@ static void init_sub_crqs(struct ibmvnic_adapter *adapter, int retry) adapter->max_rx_add_entries_per_subcrq > entries_page ? entries_page : adapter->max_rx_add_entries_per_subcrq; - /* Choosing the maximum number of queues supported by firmware*/ - adapter->req_tx_queues = adapter->max_tx_queues; - adapter->req_rx_queues = adapter->max_rx_queues; + adapter->req_tx_queues = adapter->opt_tx_comp_sub_queues; + adapter->req_rx_queues = adapter->opt_rx_comp_queues; adapter->req_rx_add_queues = adapter->max_rx_add_queues; adapter->req_mtu = adapter->max_mtu; -- cgit From 4053ab1bf98dd128344b9e67ef139f931a967ae1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 7 Nov 2016 22:09:07 +0100 Subject: vxlan: hide unused local variable A bugfix introduced a harmless warning in v4.9-rc4: drivers/net/vxlan.c: In function 'vxlan_group_used': drivers/net/vxlan.c:947:21: error: unused variable 'sock6' [-Werror=unused-variable] This hides the variable inside of the same #ifdef that is around its user. The extraneous initialization is removed at the same time, it was accidentally introduced in the same commit. Fixes: c6fcc4fc5f8b ("vxlan: avoid using stale vxlan socket.") Signed-off-by: Arnd Bergmann Acked-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index f3c2fa3ab0d5..24532cdebb00 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -944,7 +944,9 @@ static bool vxlan_group_used(struct vxlan_net *vn, struct vxlan_dev *dev) { struct vxlan_dev *vxlan; struct vxlan_sock *sock4; - struct vxlan_sock *sock6 = NULL; +#if IS_ENABLED(CONFIG_IPV6) + struct vxlan_sock *sock6; +#endif unsigned short family = dev->default_dst.remote_ip.sa.sa_family; sock4 = rtnl_dereference(dev->vn4_sock); -- cgit From d8e9e5e80e882b4f90cba7edf1e6cb7376e52e54 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Wed, 9 Nov 2016 22:52:58 +0100 Subject: drbd: Fix kernel_sendmsg() usage - potential NULL deref Don't pass a size larger than iov_len to kernel_sendmsg(). Otherwise it will cause a NULL pointer deref when kernel_sendmsg() returns with rv < size. DRBD as external module has been around in the kernel 2.4 days already. We used to be compatible to 2.4 and very early 2.6 kernels, we used to use rv = sock_sendmsg(sock, &msg, iov.iov_len); then later changed to rv = kernel_sendmsg(sock, &msg, &iov, 1, size); when we should have used rv = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); tcp_sendmsg() used to totally ignore the size parameter. 57be5bd ip: convert tcp_sendmsg() to iov_iter primitives changes that, and exposes our long standing error. Even with this error exposed, to trigger the bug, we would need to have an environment (config or otherwise) causing us to not use sendpage() for larger transfers, a failing connection, and have it fail "just at the right time". Apparently that was unlikely enough for most, so this went unnoticed for years. Still, it is known to trigger at least some of these, and suspected for the others: [0] http://lists.linbit.com/pipermail/drbd-user/2016-July/023112.html [1] http://lists.linbit.com/pipermail/drbd-dev/2016-March/003362.html [2] https://forums.grsecurity.net/viewtopic.php?f=3&t=4546 [3] https://ubuntuforums.org/showthread.php?t=2336150 [4] http://e2.howsolveproblem.com/i/1175162/ This should go into 4.9, and into all stable branches since and including v4.0, which is the first to contain the exposing change. It is correct for all stable branches older than that as well (which contain the DRBD driver; which is 2.6.33 and up). It requires a small "conflict" resolution for v4.4 and earlier, with v4.5 we dropped the comment block immediately preceding the kernel_sendmsg(). Fixes: b411b3637fa7 ("The DRBD driver") Cc: # 2.6.33.x- Cc: viro@zeniv.linux.org.uk Cc: christoph.lechleitner@iteg.at Cc: wolfgang.glas@iteg.at Reported-by: Christoph Lechleitner Tested-by: Christoph Lechleitner Signed-off-by: Richard Weinberger [changed oneliner to be "obvious" without context; more verbose message] Signed-off-by: Lars Ellenberg Signed-off-by: Jens Axboe --- drivers/block/drbd/drbd_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 100be556e613..83482721bc01 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -1871,7 +1871,7 @@ int drbd_send(struct drbd_connection *connection, struct socket *sock, drbd_update_congested(connection); } do { - rv = kernel_sendmsg(sock, &msg, &iov, 1, size); + rv = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); if (rv == -EAGAIN) { if (we_should_drop_the_connection(connection, sock)) break; -- cgit From f567e950bf51290755a2539ff2aaef4c26f735d3 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Mon, 7 Nov 2016 23:22:19 +0100 Subject: rtnl: reset calcit fptr in rtnl_unregister() To avoid having dangling function pointers left behind, reset calcit in rtnl_unregister(), too. This is no issue so far, as only the rtnl core registers a netlink handler with a calcit hook which won't be unregistered, but may become one if new code makes use of the calcit hook. Fixes: c7ac8679bec9 ("rtnetlink: Compute and store minimum ifinfo...") Cc: Jeff Kirsher Cc: Greg Rose Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index fb7348f13501..db313ec7af32 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -275,6 +275,7 @@ int rtnl_unregister(int protocol, int msgtype) rtnl_msg_handlers[protocol][msgindex].doit = NULL; rtnl_msg_handlers[protocol][msgindex].dumpit = NULL; + rtnl_msg_handlers[protocol][msgindex].calcit = NULL; return 0; } -- cgit From 8da3cf2a49a6d0ca5e620c6a5eee49b99a3f0880 Mon Sep 17 00:00:00 2001 From: Allan Chou Date: Tue, 8 Nov 2016 16:08:01 -0600 Subject: Net Driver: Add Cypress GX3 VID=04b4 PID=3610. Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller (Vendor=04b4 ProdID=3610). Patch verified on x64 linux kernel 4.7.4, 4.8.6, 4.9-rc4 systems with the Kensington SD4600P USB-C Universal Dock with Power, which uses the Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller. A similar patch was signed-off and tested-by Allan Chou on 2015-12-01. Allan verified his similar patch on x86 Linux kernel 4.1.6 system with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller. Tested-by: Allan Chou Tested-by: Chris Roth Tested-by: Artjom Simon Signed-off-by: Allan Chou Signed-off-by: Chris Roth Signed-off-by: David S. Miller --- drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index e6338c16081a..8a6675d92b98 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1656,6 +1656,19 @@ static const struct driver_info ax88178a_info = { .tx_fixup = ax88179_tx_fixup, }; +static const struct driver_info cypress_GX3_info = { + .description = "Cypress GX3 SuperSpeed to Gigabit Ethernet Controller", + .bind = ax88179_bind, + .unbind = ax88179_unbind, + .status = ax88179_status, + .link_reset = ax88179_link_reset, + .reset = ax88179_reset, + .stop = ax88179_stop, + .flags = FLAG_ETHER | FLAG_FRAMING_AX, + .rx_fixup = ax88179_rx_fixup, + .tx_fixup = ax88179_tx_fixup, +}; + static const struct driver_info dlink_dub1312_info = { .description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter", .bind = ax88179_bind, @@ -1717,6 +1730,10 @@ static const struct usb_device_id products[] = { /* ASIX AX88178A 10/100/1000 */ USB_DEVICE(0x0b95, 0x178a), .driver_info = (unsigned long)&ax88178a_info, +}, { + /* Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller */ + USB_DEVICE(0x04b4, 0x3610), + .driver_info = (unsigned long)&cypress_GX3_info, }, { /* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */ USB_DEVICE(0x2001, 0x4a00), -- cgit From 9b6c14d51bd2304b92f842e96172a9cc822fc77c Mon Sep 17 00:00:00 2001 From: David Ahern Date: Wed, 9 Nov 2016 09:07:26 -0800 Subject: net: tcp response should set oif only if it is L3 master Lorenzo noted an Android unit test failed due to e0d56fdd7342: "The expectation in the test was that the RST replying to a SYN sent to a closed port should be generated with oif=0. In other words it should not prefer the interface where the SYN came in on, but instead should follow whatever the routing table says it should do." Revert the change to ip_send_unicast_reply and tcp_v6_send_response such that the oif in the flow is set to the skb_iif only if skb_iif is an L3 master. Fixes: e0d56fdd7342 ("net: l3mdev: remove redundant calls") Reported-by: Lorenzo Colitti Signed-off-by: David Ahern Tested-by: Lorenzo Colitti Acked-by: Lorenzo Colitti Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 3 ++- net/ipv6/tcp_ipv6.c | 8 ++++++-- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 49714010ac2e..9403fa3850be 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -1577,7 +1577,8 @@ void ip_send_unicast_reply(struct sock *sk, struct sk_buff *skb, } oif = arg->bound_dev_if; - oif = oif ? : skb->skb_iif; + if (!oif && netif_index_is_l3_master(net, skb->skb_iif)) + oif = skb->skb_iif; flowi4_init_output(&fl4, oif, IP4_REPLY_MARK(net, skb->mark), diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 5a27ab4eab39..6ca23c2e76f7 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -818,8 +818,12 @@ static void tcp_v6_send_response(const struct sock *sk, struct sk_buff *skb, u32 fl6.flowi6_proto = IPPROTO_TCP; if (rt6_need_strict(&fl6.daddr) && !oif) fl6.flowi6_oif = tcp_v6_iif(skb); - else - fl6.flowi6_oif = oif ? : skb->skb_iif; + else { + if (!oif && netif_index_is_l3_master(net, skb->skb_iif)) + oif = skb->skb_iif; + + fl6.flowi6_oif = oif; + } fl6.flowi6_mark = IP6_REPLY_MARK(net, skb->mark); fl6.fl6_dport = t1->dest; -- cgit From 18266403f3fe507f0246faa1d5432333a2f139ca Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 8 Nov 2016 13:10:57 +0100 Subject: USB: cdc-acm: fix TIOCMIWAIT The TIOCMIWAIT implementation would return -EINVAL if any of the three supported signals were included in the mask. Instead of returning an error in case TIOCM_CTS is included, simply drop the mask check completely, which is in accordance with how other drivers implement this ioctl. Fixes: 5a6a62bdb925 ("cdc-acm: add TIOCMIWAIT") Cc: stable Signed-off-by: Johan Hovold Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 4ad4ca44058b..fada988512a1 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -932,8 +932,6 @@ static int wait_serial_change(struct acm *acm, unsigned long arg) DECLARE_WAITQUEUE(wait, current); struct async_icount old, new; - if (arg & (TIOCM_DSR | TIOCM_RI | TIOCM_CD)) - return -EINVAL; do { spin_lock_irq(&acm->read_lock); old = acm->oldcount; -- cgit From b13d14339baaaa720e7e5448855f33ba501917aa Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Sun, 30 Oct 2016 23:19:24 +0100 Subject: ppdev: fix double-free of pp->pdev->name free_pardevice() is called by parport_unregister_device() and already frees pp->pdev->name, don't try to do it again. This bug causes kernel crashes. I found and verified this with KASAN and some added pr_emerg()s: [ 60.316568] pp_release: pp->pdev->name == ffff88039cb264c0 [ 60.316692] free_pardevice: freeing par_dev->name at ffff88039cb264c0 [ 60.316706] pp_release: kfree(ffff88039cb264c0) [ 60.316714] ========================================================== [ 60.316722] BUG: Double free or freeing an invalid pointer [ 60.316731] Unexpected shadow byte: 0xFB [ 60.316801] Object at ffff88039cb264c0, in cache kmalloc-32 size: 32 [ 60.316813] Allocated: [ 60.316824] PID = 1695 [ 60.316869] Freed: [ 60.316880] PID = 1695 [ 60.316935] ========================================================== Signed-off-by: Jann Horn Acked-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman --- drivers/char/ppdev.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c index d23368874710..6af1ce04b3da 100644 --- a/drivers/char/ppdev.c +++ b/drivers/char/ppdev.c @@ -748,10 +748,7 @@ static int pp_release(struct inode *inode, struct file *file) } if (pp->pdev) { - const char *name = pp->pdev->name; - parport_unregister_device(pp->pdev); - kfree(name); pp->pdev = NULL; pr_debug(CHRDEV "%x: unregistered pardevice\n", minor); } -- cgit From 62bdf94a2049822ef8c6d4b0e83cd9c3a1663ab4 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 Nov 2016 16:16:24 -0500 Subject: xprtrdma: Fix DMAR failure in frwr_op_map() after reconnect When a LOCALINV WR is flushed, the frmr is marked STALE, then frwr_op_unmap_sync DMA-unmaps the frmr's SGL. These STALE frmrs are then recovered when frwr_op_map hunts for an INVALID frmr to use. All other cases that need frmr recovery leave that SGL DMA-mapped. The FRMR recovery path unconditionally DMA-unmaps the frmr's SGL. To avoid DMA unmapping the SGL twice for flushed LOCAL_INV WRs, alter the recovery logic (rather than the hot frwr_op_unmap_sync path) to distinguish among these cases. This solution also takes care of the case where multiple LOCAL_INV WRs are issued for the same rpcrdma_req, some complete successfully, but some are flushed. Reported-by: Vasco Steinmetz Signed-off-by: Chuck Lever Tested-by: Vasco Steinmetz Signed-off-by: Anna Schumaker --- net/sunrpc/xprtrdma/frwr_ops.c | 37 ++++++++++++++++++++++--------------- net/sunrpc/xprtrdma/xprt_rdma.h | 3 ++- 2 files changed, 24 insertions(+), 16 deletions(-) diff --git a/net/sunrpc/xprtrdma/frwr_ops.c b/net/sunrpc/xprtrdma/frwr_ops.c index 210949562786..26b26beef2d4 100644 --- a/net/sunrpc/xprtrdma/frwr_ops.c +++ b/net/sunrpc/xprtrdma/frwr_ops.c @@ -44,18 +44,20 @@ * being done. * * When the underlying transport disconnects, MRs are left in one of - * three states: + * four states: * * INVALID: The MR was not in use before the QP entered ERROR state. - * (Or, the LOCAL_INV WR has not completed or flushed yet). - * - * STALE: The MR was being registered or unregistered when the QP - * entered ERROR state, and the pending WR was flushed. * * VALID: The MR was registered before the QP entered ERROR state. * - * When frwr_op_map encounters STALE and VALID MRs, they are recovered - * with ib_dereg_mr and then are re-initialized. Beause MR recovery + * FLUSHED_FR: The MR was being registered when the QP entered ERROR + * state, and the pending WR was flushed. + * + * FLUSHED_LI: The MR was being invalidated when the QP entered ERROR + * state, and the pending WR was flushed. + * + * When frwr_op_map encounters FLUSHED and VALID MRs, they are recovered + * with ib_dereg_mr and then are re-initialized. Because MR recovery * allocates fresh resources, it is deferred to a workqueue, and the * recovered MRs are placed back on the rb_mws list when recovery is * complete. frwr_op_map allocates another MR for the current RPC while @@ -177,12 +179,15 @@ __frwr_reset_mr(struct rpcrdma_ia *ia, struct rpcrdma_mw *r) static void frwr_op_recover_mr(struct rpcrdma_mw *mw) { + enum rpcrdma_frmr_state state = mw->frmr.fr_state; struct rpcrdma_xprt *r_xprt = mw->mw_xprt; struct rpcrdma_ia *ia = &r_xprt->rx_ia; int rc; rc = __frwr_reset_mr(ia, mw); - ib_dma_unmap_sg(ia->ri_device, mw->mw_sg, mw->mw_nents, mw->mw_dir); + if (state != FRMR_FLUSHED_LI) + ib_dma_unmap_sg(ia->ri_device, + mw->mw_sg, mw->mw_nents, mw->mw_dir); if (rc) goto out_release; @@ -262,10 +267,8 @@ frwr_op_maxpages(struct rpcrdma_xprt *r_xprt) } static void -__frwr_sendcompletion_flush(struct ib_wc *wc, struct rpcrdma_frmr *frmr, - const char *wr) +__frwr_sendcompletion_flush(struct ib_wc *wc, const char *wr) { - frmr->fr_state = FRMR_IS_STALE; if (wc->status != IB_WC_WR_FLUSH_ERR) pr_err("rpcrdma: %s: %s (%u/0x%x)\n", wr, ib_wc_status_msg(wc->status), @@ -288,7 +291,8 @@ frwr_wc_fastreg(struct ib_cq *cq, struct ib_wc *wc) if (wc->status != IB_WC_SUCCESS) { cqe = wc->wr_cqe; frmr = container_of(cqe, struct rpcrdma_frmr, fr_cqe); - __frwr_sendcompletion_flush(wc, frmr, "fastreg"); + frmr->fr_state = FRMR_FLUSHED_FR; + __frwr_sendcompletion_flush(wc, "fastreg"); } } @@ -308,7 +312,8 @@ frwr_wc_localinv(struct ib_cq *cq, struct ib_wc *wc) if (wc->status != IB_WC_SUCCESS) { cqe = wc->wr_cqe; frmr = container_of(cqe, struct rpcrdma_frmr, fr_cqe); - __frwr_sendcompletion_flush(wc, frmr, "localinv"); + frmr->fr_state = FRMR_FLUSHED_LI; + __frwr_sendcompletion_flush(wc, "localinv"); } } @@ -328,8 +333,10 @@ frwr_wc_localinv_wake(struct ib_cq *cq, struct ib_wc *wc) /* WARNING: Only wr_cqe and status are reliable at this point */ cqe = wc->wr_cqe; frmr = container_of(cqe, struct rpcrdma_frmr, fr_cqe); - if (wc->status != IB_WC_SUCCESS) - __frwr_sendcompletion_flush(wc, frmr, "localinv"); + if (wc->status != IB_WC_SUCCESS) { + frmr->fr_state = FRMR_FLUSHED_LI; + __frwr_sendcompletion_flush(wc, "localinv"); + } complete(&frmr->fr_linv_done); } diff --git a/net/sunrpc/xprtrdma/xprt_rdma.h b/net/sunrpc/xprtrdma/xprt_rdma.h index 0d35b761c883..6e1bba358203 100644 --- a/net/sunrpc/xprtrdma/xprt_rdma.h +++ b/net/sunrpc/xprtrdma/xprt_rdma.h @@ -216,7 +216,8 @@ struct rpcrdma_rep { enum rpcrdma_frmr_state { FRMR_IS_INVALID, /* ready to be used */ FRMR_IS_VALID, /* in use */ - FRMR_IS_STALE, /* failed completion */ + FRMR_FLUSHED_FR, /* flushed FASTREG WR */ + FRMR_FLUSHED_LI, /* flushed LOCALINV WR */ }; struct rpcrdma_frmr { -- cgit From 0a866d38ef3c13cf5834b78df21ee4c39bb5a689 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 9 Nov 2016 18:01:01 -0500 Subject: drm/amd/powerplay: propagate errors in phm_get_voltage_evv_on_sclk Missing for one case. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 2ba7937d2545..520665e1ef12 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -711,7 +711,7 @@ int phm_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type, int ret = 0; if (hwmgr->chip_id < CHIP_POLARIS10) { - atomctrl_get_voltage_evv_on_sclk(hwmgr, voltage_type, sclk, id, voltage); + ret = atomctrl_get_voltage_evv_on_sclk(hwmgr, voltage_type, sclk, id, voltage); if (*voltage >= 2000 || *voltage == 0) *voltage = 1150; } else { -- cgit From 90ebf11857c2743fab1b2b64140aff24e256e758 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 9 Nov 2016 18:04:54 -0500 Subject: drm/amd/powerplay: update phm_get_voltage_evv_on_sclk for iceland Was missing the handling for iceland. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 520665e1ef12..e03dcb6ea9c1 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -710,7 +710,9 @@ int phm_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type, uint32_t vol; int ret = 0; - if (hwmgr->chip_id < CHIP_POLARIS10) { + if (hwmgr->chip_id < CHIP_TONGA) { + ret = atomctrl_get_voltage_evv(hwmgr, id, voltage); + } else if (hwmgr->chip_id < CHIP_POLARIS10) { ret = atomctrl_get_voltage_evv_on_sclk(hwmgr, voltage_type, sclk, id, voltage); if (*voltage >= 2000 || *voltage == 0) *voltage = 1150; -- cgit From 0f12f73c5175d39445fa10cdca4481f80efdef49 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 9 Nov 2016 17:52:42 -0500 Subject: drm/amd/powerplay/smu7: fix checks in smu7_get_evv_voltages (v2) Only check if the tables exist in relevant configs. This fixes a failure on V0 tables. v2: fix version check as suggested by Rex bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 51fb86f20c21..f41cddf2a16b 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -1460,19 +1460,19 @@ static int smu7_get_evv_voltages(struct pp_hwmgr *hwmgr) struct phm_ppt_v1_clock_voltage_dependency_table *sclk_table = NULL; - if (table_info == NULL) - return -EINVAL; - - sclk_table = table_info->vdd_dep_on_sclk; - for (i = 0; i < SMU7_MAX_LEAKAGE_COUNT; i++) { vv_id = ATOM_VIRTUAL_VOLTAGE_ID0 + i; if (data->vdd_gfx_control == SMU7_VOLTAGE_CONTROL_BY_SVID2) { - if (0 == phm_get_sclk_for_voltage_evv(hwmgr, + if ((hwmgr->pp_table_version == PP_TABLE_V1) + && !phm_get_sclk_for_voltage_evv(hwmgr, table_info->vddgfx_lookup_table, vv_id, &sclk)) { if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_ClockStretcher)) { + if (table_info == NULL) + return -EINVAL; + sclk_table = table_info->vdd_dep_on_sclk; + for (j = 1; j < sclk_table->count; j++) { if (sclk_table->entries[j].clk == sclk && sclk_table->entries[j].cks_enable == 0) { @@ -1498,12 +1498,15 @@ static int smu7_get_evv_voltages(struct pp_hwmgr *hwmgr) } } } else { - if ((hwmgr->pp_table_version == PP_TABLE_V0) || !phm_get_sclk_for_voltage_evv(hwmgr, table_info->vddc_lookup_table, vv_id, &sclk)) { if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_ClockStretcher)) { + if (table_info == NULL) + return -EINVAL; + sclk_table = table_info->vdd_dep_on_sclk; + for (j = 1; j < sclk_table->count; j++) { if (sclk_table->entries[j].clk == sclk && sclk_table->entries[j].cks_enable == 0) { -- cgit From 0ace81ec7192201af48528c309ee0b4103021f55 Mon Sep 17 00:00:00 2001 From: Lance Richardson Date: Wed, 9 Nov 2016 15:04:39 -0500 Subject: ipv4: update comment to document GSO fragmentation cases. This is a follow-up to commit 9ee6c5dc816a ("ipv4: allow local fragmentation in ip_finish_output_gso()"), updating the comment documenting cases in which fragmentation is needed for egress GSO packets. Suggested-by: Shmulik Ladkani Reviewed-by: Shmulik Ladkani Signed-off-by: Lance Richardson Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 9403fa3850be..105908d841a3 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -244,12 +244,18 @@ static int ip_finish_output_gso(struct net *net, struct sock *sk, if (skb_gso_validate_mtu(skb, mtu)) return ip_finish_output2(net, sk, skb); - /* Slowpath - GSO segment length is exceeding the dst MTU. + /* Slowpath - GSO segment length exceeds the egress MTU. * - * This can happen in two cases: - * 1) TCP GRO packet, DF bit not set - * 2) skb arrived via virtio-net, we thus get TSO/GSO skbs directly - * from host network stack. + * This can happen in several cases: + * - Forwarding of a TCP GRO skb, when DF flag is not set. + * - Forwarding of an skb that arrived on a virtualization interface + * (virtio-net/vhost/tap) with TSO/GSO size set by other network + * stack. + * - Local GSO skb transmitted on an NETIF_F_TSO tunnel stacked over an + * interface with a smaller MTU. + * - Arriving GRO skb (or GSO skb in a virtualized environment) that is + * bridged to a NETIF_F_TSO tunnel stacked over an interface with an + * insufficent MTU. */ features = netif_skb_features(skb); BUILD_BUG_ON(sizeof(*IPCB(skb)) > SKB_SGO_CB_OFFSET); -- cgit From 31a3a7b5b26f75fbe82de10ca99f2b673f6c26b4 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Thu, 10 Nov 2016 11:14:37 -0600 Subject: PCI: rockchip: Add three new resets as required properties pm_rst, aclk_rst, pclk_rst was controlled by ROM code so the software wasn't needed to control it again in theory. But it didn't work properly, so we do need to do it again and add enough delay between the assert of pm_rst and the deassert of pm_rst. The Soc intergrated with this controller, rk3399, is still under MP test internally, so the backward compatibility won't be a big deal. Signed-off-by: Shawn Lin Signed-off-by: Bjorn Helgaas Reviewed-by: Heiko Stuebner Acked-by: Rob Herring --- .../devicetree/bindings/pci/rockchip-pcie.txt | 11 ++-- drivers/pci/host/pcie-rockchip.c | 62 ++++++++++++++++++++++ 2 files changed, 70 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt index ba67b39939c1..71aeda1ca055 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt @@ -26,13 +26,16 @@ Required properties: - "sys" - "legacy" - "client" -- resets: Must contain five entries for each entry in reset-names. +- resets: Must contain seven entries for each entry in reset-names. See ../reset/reset.txt for details. - reset-names: Must include the following names - "core" - "mgmt" - "mgmt-sticky" - "pipe" + - "pm" + - "aclk" + - "pclk" - pinctrl-names : The pin control state names - pinctrl-0: The "default" pinctrl state - #interrupt-cells: specifies the number of cells needed to encode an @@ -86,8 +89,10 @@ pcie0: pcie@f8000000 { reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>; reg-names = "axi-base", "apb-base"; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe"; + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> , + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; phys = <&pcie_phy>; phy-names = "pcie-phy"; pinctrl-names = "default"; diff --git a/drivers/pci/host/pcie-rockchip.c b/drivers/pci/host/pcie-rockchip.c index e0b22dab9b7a..e04f69beb42d 100644 --- a/drivers/pci/host/pcie-rockchip.c +++ b/drivers/pci/host/pcie-rockchip.c @@ -190,6 +190,9 @@ struct rockchip_pcie { struct reset_control *mgmt_rst; struct reset_control *mgmt_sticky_rst; struct reset_control *pipe_rst; + struct reset_control *pm_rst; + struct reset_control *aclk_rst; + struct reset_control *pclk_rst; struct clk *aclk_pcie; struct clk *aclk_perf_pcie; struct clk *hclk_pcie; @@ -408,6 +411,44 @@ static int rockchip_pcie_init_port(struct rockchip_pcie *rockchip) gpiod_set_value(rockchip->ep_gpio, 0); + err = reset_control_assert(rockchip->aclk_rst); + if (err) { + dev_err(dev, "assert aclk_rst err %d\n", err); + return err; + } + + err = reset_control_assert(rockchip->pclk_rst); + if (err) { + dev_err(dev, "assert pclk_rst err %d\n", err); + return err; + } + + err = reset_control_assert(rockchip->pm_rst); + if (err) { + dev_err(dev, "assert pm_rst err %d\n", err); + return err; + } + + udelay(10); + + err = reset_control_deassert(rockchip->pm_rst); + if (err) { + dev_err(dev, "deassert pm_rst err %d\n", err); + return err; + } + + err = reset_control_deassert(rockchip->aclk_rst); + if (err) { + dev_err(dev, "deassert mgmt_sticky_rst err %d\n", err); + return err; + } + + err = reset_control_deassert(rockchip->pclk_rst); + if (err) { + dev_err(dev, "deassert mgmt_sticky_rst err %d\n", err); + return err; + } + err = phy_init(rockchip->phy); if (err < 0) { dev_err(dev, "fail to init phy, err %d\n", err); @@ -781,6 +822,27 @@ static int rockchip_pcie_parse_dt(struct rockchip_pcie *rockchip) return PTR_ERR(rockchip->pipe_rst); } + rockchip->pm_rst = devm_reset_control_get(dev, "pm"); + if (IS_ERR(rockchip->pm_rst)) { + if (PTR_ERR(rockchip->pm_rst) != -EPROBE_DEFER) + dev_err(dev, "missing pm reset property in node\n"); + return PTR_ERR(rockchip->pm_rst); + } + + rockchip->pclk_rst = devm_reset_control_get(dev, "pclk"); + if (IS_ERR(rockchip->pclk_rst)) { + if (PTR_ERR(rockchip->pclk_rst) != -EPROBE_DEFER) + dev_err(dev, "missing pclk reset property in node\n"); + return PTR_ERR(rockchip->pclk_rst); + } + + rockchip->aclk_rst = devm_reset_control_get(dev, "aclk"); + if (IS_ERR(rockchip->aclk_rst)) { + if (PTR_ERR(rockchip->aclk_rst) != -EPROBE_DEFER) + dev_err(dev, "missing aclk reset property in node\n"); + return PTR_ERR(rockchip->aclk_rst); + } + rockchip->ep_gpio = devm_gpiod_get(dev, "ep", GPIOD_OUT_HIGH); if (IS_ERR(rockchip->ep_gpio)) { dev_err(dev, "missing ep-gpios property in node\n"); -- cgit From 4d3222f7071c01104b43300f1c10b55723df8f68 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Thu, 10 Nov 2016 11:14:46 -0600 Subject: arm64: dts: rockchip: add three new resets for rk3399 PCIe controller pm_rst, aclk_rst and pclk_rst should be controlled by driver, so we need to add these three resets for PCIe controller. Signed-off-by: Shawn Lin Signed-off-by: Bjorn Helgaas Acked-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index b65c193dc64e..7afbfb0f96a3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -300,8 +300,11 @@ ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe"; + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, + <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; status = "disabled"; pcie0_intc: interrupt-controller { -- cgit From 8d1d8fcb21cfc4a65731760c3100920f929e8f3d Mon Sep 17 00:00:00 2001 From: Ram Amrani Date: Wed, 9 Nov 2016 22:48:43 +0200 Subject: qed: configure ll2 RoCE v1/v2 flavor correctly Currently RoCE v2 won't operate with RDMA CM due to missing setting of the roce-flavour in the ll2 configuration. This patch properly sets the flavour, and deletes incorrect HSI that doesn't [yet] exist. Fixes: abd49676c707 ("qed: Add RoCE ll2 & GSI support") Signed-off-by: Ram Amrani Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_hsi.h | 3 --- drivers/net/ethernet/qlogic/qed/qed_ll2.c | 1 + 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_hsi.h b/drivers/net/ethernet/qlogic/qed/qed_hsi.h index 72eee29c677f..2777d5bb4380 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_hsi.h +++ b/drivers/net/ethernet/qlogic/qed/qed_hsi.h @@ -727,9 +727,6 @@ struct core_tx_bd_flags { #define CORE_TX_BD_FLAGS_L4_PROTOCOL_SHIFT 6 #define CORE_TX_BD_FLAGS_L4_PSEUDO_CSUM_MODE_MASK 0x1 #define CORE_TX_BD_FLAGS_L4_PSEUDO_CSUM_MODE_SHIFT 7 -#define CORE_TX_BD_FLAGS_ROCE_FLAV_MASK 0x1 -#define CORE_TX_BD_FLAGS_ROCE_FLAV_SHIFT 12 - }; struct core_tx_bd { diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c index 63e1a1b0ef8e..f95385cbbd40 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c @@ -1119,6 +1119,7 @@ static void qed_ll2_prepare_tx_packet_set_bd(struct qed_hwfn *p_hwfn, start_bd->bd_flags.as_bitfield |= CORE_TX_BD_FLAGS_START_BD_MASK << CORE_TX_BD_FLAGS_START_BD_SHIFT; SET_FIELD(start_bd->bitfield0, CORE_TX_BD_NBDS, num_of_bds); + SET_FIELD(start_bd->bitfield0, CORE_TX_BD_ROCE_FLAV, type); DMA_REGPAIR_LE(start_bd->addr, first_frag); start_bd->nbytes = cpu_to_le16(first_frag_len); -- cgit From 5c5f26090840951b4102d9a1e6db9aac41101e5a Mon Sep 17 00:00:00 2001 From: Ram Amrani Date: Wed, 9 Nov 2016 22:48:44 +0200 Subject: qed: Correct rdma params configuration Previous fix has broken RoCE support as the rdma_pf_params are now being set into the parameters only after the params are alrady assigned into the hw-function. Fixes: 0189efb8f4f8 ("qed*: Fix Kconfig dependencies with INFINIBAND_QEDR") Signed-off-by: Ram Amrani Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_main.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index c418360ba02a..333c7442e48a 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -839,20 +839,19 @@ static void qed_update_pf_params(struct qed_dev *cdev, { int i; + if (IS_ENABLED(CONFIG_QED_RDMA)) { + params->rdma_pf_params.num_qps = QED_ROCE_QPS; + params->rdma_pf_params.min_dpis = QED_ROCE_DPIS; + /* divide by 3 the MRs to avoid MF ILT overflow */ + params->rdma_pf_params.num_mrs = RDMA_MAX_TIDS; + params->rdma_pf_params.gl_pi = QED_ROCE_PROTOCOL_INDEX; + } + for (i = 0; i < cdev->num_hwfns; i++) { struct qed_hwfn *p_hwfn = &cdev->hwfns[i]; p_hwfn->pf_params = *params; } - - if (!IS_ENABLED(CONFIG_QED_RDMA)) - return; - - params->rdma_pf_params.num_qps = QED_ROCE_QPS; - params->rdma_pf_params.min_dpis = QED_ROCE_DPIS; - /* divide by 3 the MRs to avoid MF ILT overflow */ - params->rdma_pf_params.num_mrs = RDMA_MAX_TIDS; - params->rdma_pf_params.gl_pi = QED_ROCE_PROTOCOL_INDEX; } static int qed_slowpath_start(struct qed_dev *cdev, -- cgit From 33b1341cd1bf5c89e7ef332aa8ac3ed614a3d942 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 10 Nov 2016 12:31:04 +0100 Subject: mlxsw: spectrum_router: Fix handling of neighbour structure __neigh_create function works in a different way than assumed. It passes "n" as a parameter to ndo_neigh_construct. But this "n" might be destroyed right away before __neigh_create() returns in case there is already another neighbour struct in the hashtable with the same dev and primary key. That is not expected by mlxsw_sp_router_neigh_construct() and the stored "n" points to freed memory, eventually leading to crash. Fix this by doing tight 1:1 coupling between neighbour struct and internal driver neigh_entry. That allows to narrow down the key in internal driver hashtable to do lookups by "n" only. Fixes: 6cf3c971dc84 ("mlxsw: spectrum_router: Add private neigh table") Signed-off-by: Jiri Pirko Acked-by: Ido Schimmel Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlxsw/spectrum_router.c | 95 ++++++++-------------- 1 file changed, 34 insertions(+), 61 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 4573da2c5560..28630129065d 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -600,15 +600,13 @@ static void mlxsw_sp_vrs_fini(struct mlxsw_sp *mlxsw_sp) } struct mlxsw_sp_neigh_key { - unsigned char addr[sizeof(struct in6_addr)]; - struct net_device *dev; + struct neighbour *n; }; struct mlxsw_sp_neigh_entry { struct rhash_head ht_node; struct mlxsw_sp_neigh_key key; u16 rif; - struct neighbour *n; bool offloaded; struct delayed_work dw; struct mlxsw_sp_port *mlxsw_sp_port; @@ -646,19 +644,15 @@ mlxsw_sp_neigh_entry_remove(struct mlxsw_sp *mlxsw_sp, static void mlxsw_sp_router_neigh_update_hw(struct work_struct *work); static struct mlxsw_sp_neigh_entry * -mlxsw_sp_neigh_entry_create(const void *addr, size_t addr_len, - struct net_device *dev, u16 rif, - struct neighbour *n) +mlxsw_sp_neigh_entry_create(struct neighbour *n, u16 rif) { struct mlxsw_sp_neigh_entry *neigh_entry; neigh_entry = kzalloc(sizeof(*neigh_entry), GFP_ATOMIC); if (!neigh_entry) return NULL; - memcpy(neigh_entry->key.addr, addr, addr_len); - neigh_entry->key.dev = dev; + neigh_entry->key.n = n; neigh_entry->rif = rif; - neigh_entry->n = n; INIT_DELAYED_WORK(&neigh_entry->dw, mlxsw_sp_router_neigh_update_hw); INIT_LIST_HEAD(&neigh_entry->nexthop_list); return neigh_entry; @@ -671,13 +665,11 @@ mlxsw_sp_neigh_entry_destroy(struct mlxsw_sp_neigh_entry *neigh_entry) } static struct mlxsw_sp_neigh_entry * -mlxsw_sp_neigh_entry_lookup(struct mlxsw_sp *mlxsw_sp, const void *addr, - size_t addr_len, struct net_device *dev) +mlxsw_sp_neigh_entry_lookup(struct mlxsw_sp *mlxsw_sp, struct neighbour *n) { - struct mlxsw_sp_neigh_key key = {{ 0 } }; + struct mlxsw_sp_neigh_key key; - memcpy(key.addr, addr, addr_len); - key.dev = dev; + key.n = n; return rhashtable_lookup_fast(&mlxsw_sp->router.neigh_ht, &key, mlxsw_sp_neigh_ht_params); } @@ -689,26 +681,20 @@ int mlxsw_sp_router_neigh_construct(struct net_device *dev, struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; struct mlxsw_sp_neigh_entry *neigh_entry; struct mlxsw_sp_rif *r; - u32 dip; int err; if (n->tbl != &arp_tbl) return 0; - dip = ntohl(*((__be32 *) n->primary_key)); - neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, &dip, sizeof(dip), - n->dev); - if (neigh_entry) { - WARN_ON(neigh_entry->n != n); + neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, n); + if (neigh_entry) return 0; - } r = mlxsw_sp_rif_find_by_dev(mlxsw_sp, n->dev); if (WARN_ON(!r)) return -EINVAL; - neigh_entry = mlxsw_sp_neigh_entry_create(&dip, sizeof(dip), n->dev, - r->rif, n); + neigh_entry = mlxsw_sp_neigh_entry_create(n, r->rif); if (!neigh_entry) return -ENOMEM; err = mlxsw_sp_neigh_entry_insert(mlxsw_sp, neigh_entry); @@ -727,14 +713,11 @@ void mlxsw_sp_router_neigh_destroy(struct net_device *dev, struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev); struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; struct mlxsw_sp_neigh_entry *neigh_entry; - u32 dip; if (n->tbl != &arp_tbl) return; - dip = ntohl(*((__be32 *) n->primary_key)); - neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, &dip, sizeof(dip), - n->dev); + neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, n); if (!neigh_entry) return; mlxsw_sp_neigh_entry_remove(mlxsw_sp, neigh_entry); @@ -862,7 +845,7 @@ static void mlxsw_sp_router_neighs_update_nh(struct mlxsw_sp *mlxsw_sp) * is active regardless of the traffic. */ if (!list_empty(&neigh_entry->nexthop_list)) - neigh_event_send(neigh_entry->n, NULL); + neigh_event_send(neigh_entry->key.n, NULL); } rtnl_unlock(); } @@ -908,9 +891,9 @@ static void mlxsw_sp_router_probe_unresolved_nexthops(struct work_struct *work) rtnl_lock(); list_for_each_entry(neigh_entry, &mlxsw_sp->router.nexthop_neighs_list, nexthop_neighs_list_node) { - if (!(neigh_entry->n->nud_state & NUD_VALID) && + if (!(neigh_entry->key.n->nud_state & NUD_VALID) && !list_empty(&neigh_entry->nexthop_list)) - neigh_event_send(neigh_entry->n, NULL); + neigh_event_send(neigh_entry->key.n, NULL); } rtnl_unlock(); @@ -927,7 +910,7 @@ static void mlxsw_sp_router_neigh_update_hw(struct work_struct *work) { struct mlxsw_sp_neigh_entry *neigh_entry = container_of(work, struct mlxsw_sp_neigh_entry, dw.work); - struct neighbour *n = neigh_entry->n; + struct neighbour *n = neigh_entry->key.n; struct mlxsw_sp_port *mlxsw_sp_port = neigh_entry->mlxsw_sp_port; struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; char rauht_pl[MLXSW_REG_RAUHT_LEN]; @@ -1030,11 +1013,8 @@ int mlxsw_sp_router_netevent_event(struct notifier_block *unused, mlxsw_sp = mlxsw_sp_port->mlxsw_sp; dip = ntohl(*((__be32 *) n->primary_key)); - neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, - &dip, - sizeof(__be32), - dev); - if (WARN_ON(!neigh_entry) || WARN_ON(neigh_entry->n != n)) { + neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, n); + if (WARN_ON(!neigh_entry)) { mlxsw_sp_port_dev_put(mlxsw_sp_port); return NOTIFY_DONE; } @@ -1343,33 +1323,26 @@ static int mlxsw_sp_nexthop_init(struct mlxsw_sp *mlxsw_sp, struct fib_nh *fib_nh) { struct mlxsw_sp_neigh_entry *neigh_entry; - u32 gwip = ntohl(fib_nh->nh_gw); struct net_device *dev = fib_nh->nh_dev; struct neighbour *n; u8 nud_state; - neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, &gwip, - sizeof(gwip), dev); - if (!neigh_entry) { - __be32 gwipn = htonl(gwip); - - n = neigh_create(&arp_tbl, &gwipn, dev); + /* Take a reference of neigh here ensuring that neigh would + * not be detructed before the nexthop entry is finished. + * The reference is taken either in neigh_lookup() or + * in neith_create() in case n is not found. + */ + n = neigh_lookup(&arp_tbl, &fib_nh->nh_gw, dev); + if (!n) { + n = neigh_create(&arp_tbl, &fib_nh->nh_gw, dev); if (IS_ERR(n)) return PTR_ERR(n); neigh_event_send(n, NULL); - neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, &gwip, - sizeof(gwip), dev); - if (!neigh_entry) { - neigh_release(n); - return -EINVAL; - } - } else { - /* Take a reference of neigh here ensuring that neigh would - * not be detructed before the nexthop entry is finished. - * The second branch takes the reference in neith_create() - */ - n = neigh_entry->n; - neigh_clone(n); + } + neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, n); + if (!neigh_entry) { + neigh_release(n); + return -EINVAL; } /* If that is the first nexthop connected to that neigh, add to @@ -1403,7 +1376,7 @@ static void mlxsw_sp_nexthop_fini(struct mlxsw_sp *mlxsw_sp, if (list_empty(&nh->neigh_entry->nexthop_list)) list_del(&nh->neigh_entry->nexthop_neighs_list_node); - neigh_release(neigh_entry->n); + neigh_release(neigh_entry->key.n); } static struct mlxsw_sp_nexthop_group * @@ -1463,11 +1436,11 @@ static bool mlxsw_sp_nexthop_match(struct mlxsw_sp_nexthop *nh, for (i = 0; i < fi->fib_nhs; i++) { struct fib_nh *fib_nh = &fi->fib_nh[i]; - u32 gwip = ntohl(fib_nh->nh_gw); + struct neighbour *n = nh->neigh_entry->key.n; - if (memcmp(nh->neigh_entry->key.addr, - &gwip, sizeof(u32)) == 0 && - nh->neigh_entry->key.dev == fib_nh->nh_dev) + if (memcmp(n->primary_key, &fib_nh->nh_gw, + sizeof(fib_nh->nh_gw)) == 0 && + n->dev == fib_nh->nh_dev) return true; } return false; -- cgit From 0e3715c9c250747280b1757ea267c577e7591e31 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 10 Nov 2016 12:31:05 +0100 Subject: mlxsw: spectrum_router: Ignore FIB notification events for non-init namespaces Since now, the table with same id in multiple netnamespaces were squashed to a single virtual router. That is not only incorrect, it also causes error messages when trying to use RALUE register to do double remove of FIB entries, like this one: mlxsw_spectrum 0000:03:00.0: EMAD reg access failed (tid=facb831c00007b20,reg_id=8013(ralue),type=write,status=7(bad parameter)) Since we don't allow ports to change namespaces (NETIF_F_NETNS_LOCAL), and the infrastructure is not yet prepared to handle netnamespaces, just ignore FIB notification events for non-init namespaces. That is clear to do since we don't need to offload them. Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Signed-off-by: Jiri Pirko Acked-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 28630129065d..040737e14a3f 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -1931,6 +1931,9 @@ static int mlxsw_sp_router_fib_event(struct notifier_block *nb, struct fib_entry_notifier_info *fen_info = ptr; int err; + if (!net_eq(fen_info->info.net, &init_net)) + return NOTIFY_DONE; + switch (event) { case FIB_EVENT_ENTRY_ADD: err = mlxsw_sp_router_fib4_add(mlxsw_sp, fen_info); -- cgit From 954e6bee03fea509a85aea4cbf45307fe4e3b43e Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 10 Nov 2016 14:07:34 +0800 Subject: drm/amd/powerplay: implement get_clock_by_type for iceland. iceland use pptable v0. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Alex Deucher Signed-off-by: Rex Zhu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 51 +++++++++++++++--------- 1 file changed, 33 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index f41cddf2a16b..b0c929dd8beb 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -4233,18 +4233,26 @@ static int smu7_get_sclks(struct pp_hwmgr *hwmgr, struct amd_pp_clocks *clocks) { struct phm_ppt_v1_information *table_info = (struct phm_ppt_v1_information *)hwmgr->pptable; - struct phm_ppt_v1_clock_voltage_dependency_table *dep_sclk_table; + struct phm_ppt_v1_clock_voltage_dependency_table *dep_sclk_table = NULL; + struct phm_clock_voltage_dependency_table *sclk_table; int i; - if (table_info == NULL) - return -EINVAL; - - dep_sclk_table = table_info->vdd_dep_on_sclk; - - for (i = 0; i < dep_sclk_table->count; i++) { - clocks->clock[i] = dep_sclk_table->entries[i].clk; - clocks->count++; + if (hwmgr->pp_table_version == PP_TABLE_V1) { + if (table_info == NULL || table_info->vdd_dep_on_sclk == NULL) + return -EINVAL; + dep_sclk_table = table_info->vdd_dep_on_sclk; + for (i = 0; i < dep_sclk_table->count; i++) { + clocks->clock[i] = dep_sclk_table->entries[i].clk; + clocks->count++; + } + } else if (hwmgr->pp_table_version == PP_TABLE_V0) { + sclk_table = hwmgr->dyn_state.vddc_dependency_on_sclk; + for (i = 0; i < sclk_table->count; i++) { + clocks->clock[i] = sclk_table->entries[i].clk; + clocks->count++; + } } + return 0; } @@ -4266,17 +4274,24 @@ static int smu7_get_mclks(struct pp_hwmgr *hwmgr, struct amd_pp_clocks *clocks) (struct phm_ppt_v1_information *)hwmgr->pptable; struct phm_ppt_v1_clock_voltage_dependency_table *dep_mclk_table; int i; + struct phm_clock_voltage_dependency_table *mclk_table; - if (table_info == NULL) - return -EINVAL; - - dep_mclk_table = table_info->vdd_dep_on_mclk; - - for (i = 0; i < dep_mclk_table->count; i++) { - clocks->clock[i] = dep_mclk_table->entries[i].clk; - clocks->latency[i] = smu7_get_mem_latency(hwmgr, + if (hwmgr->pp_table_version == PP_TABLE_V1) { + if (table_info == NULL) + return -EINVAL; + dep_mclk_table = table_info->vdd_dep_on_mclk; + for (i = 0; i < dep_mclk_table->count; i++) { + clocks->clock[i] = dep_mclk_table->entries[i].clk; + clocks->latency[i] = smu7_get_mem_latency(hwmgr, dep_mclk_table->entries[i].clk); - clocks->count++; + clocks->count++; + } + } else if (hwmgr->pp_table_version == PP_TABLE_V0) { + mclk_table = hwmgr->dyn_state.vddc_dependency_on_mclk; + for (i = 0; i < mclk_table->count; i++) { + clocks->clock[i] = mclk_table->entries[i].clk; + clocks->count++; + } } return 0; } -- cgit From 8a8d56176635515d607c520580c73d61f300b409 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Wed, 9 Nov 2016 16:47:54 +0800 Subject: ceph: use default file splice read callback Splice read/write implementation changed recently. When using generic_file_splice_read(), iov_iter with type == ITER_PIPE is passed to filesystem's read_iter callback. But ceph_sync_read() can't serve ITER_PIPE iov_iter correctly (ITER_PIPE iov_iter expects pages from page cache). Fixing ceph_sync_read() requires a big patch. So use default splice read callback for now. Signed-off-by: Yan, Zheng Signed-off-by: Ilya Dryomov --- fs/ceph/file.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ceph/file.c b/fs/ceph/file.c index 18630e800208..f995e3528a33 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -1770,7 +1770,6 @@ const struct file_operations ceph_file_fops = { .fsync = ceph_fsync, .lock = ceph_lock, .flock = ceph_flock, - .splice_read = generic_file_splice_read, .splice_write = iter_file_splice_write, .unlocked_ioctl = ceph_ioctl, .compat_ioctl = ceph_ioctl, -- cgit From 3890dce1d3a8b9fe3bc36de99496792e468cd079 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Wed, 9 Nov 2016 16:42:48 +0800 Subject: libceph: fix legacy layout decode with pool 0 If your data pool was pool 0, ceph_file_layout_from_legacy() transform that to -1 unconditionally, which broke upgrades. We only want do that for a fully zeroed ceph_file_layout, so that it still maps to a file_layout_t. If any fields are set, though, we trust the fl_pgpool to be a valid pool. Fixes: 7627151ea30bc ("libceph: define new ceph_file_layout structure") Link: http://tracker.ceph.com/issues/17825 Signed-off-by: Yan, Zheng Signed-off-by: Ilya Dryomov --- net/ceph/ceph_fs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ceph/ceph_fs.c b/net/ceph/ceph_fs.c index 7d54e944de5e..dcbe67ff3e2b 100644 --- a/net/ceph/ceph_fs.c +++ b/net/ceph/ceph_fs.c @@ -34,7 +34,8 @@ void ceph_file_layout_from_legacy(struct ceph_file_layout *fl, fl->stripe_count = le32_to_cpu(legacy->fl_stripe_count); fl->object_size = le32_to_cpu(legacy->fl_object_size); fl->pool_id = le32_to_cpu(legacy->fl_pg_pool); - if (fl->pool_id == 0) + if (fl->pool_id == 0 && fl->stripe_unit == 0 && + fl->stripe_count == 0 && fl->object_size == 0) fl->pool_id = -1; } EXPORT_SYMBOL(ceph_file_layout_from_legacy); -- cgit From 264048afab27d7c27eedf5394714e0b396d787f7 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Tue, 8 Nov 2016 15:15:24 +0100 Subject: libceph: initialize last_linger_id with a large integer osdc->last_linger_id is a counter for lreq->linger_id, which is used for watch cookies. Starting with a large integer should ease the task of telling apart kernel and userspace clients. Signed-off-by: Ilya Dryomov --- include/linux/ceph/osd_client.h | 2 ++ net/ceph/osd_client.c | 1 + 2 files changed, 3 insertions(+) diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h index 96337b15a60d..a8e66344bacc 100644 --- a/include/linux/ceph/osd_client.h +++ b/include/linux/ceph/osd_client.h @@ -258,6 +258,8 @@ struct ceph_watch_item { struct ceph_entity_addr addr; }; +#define CEPH_LINGER_ID_START 0xffff000000000000ULL + struct ceph_osd_client { struct ceph_client *client; diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index d9bf7a1d0a58..e6ae15bc41b7 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -4094,6 +4094,7 @@ int ceph_osdc_init(struct ceph_osd_client *osdc, struct ceph_client *client) osd_init(&osdc->homeless_osd); osdc->homeless_osd.o_osdc = osdc; osdc->homeless_osd.o_osd = CEPH_HOMELESS_OSD; + osdc->last_linger_id = CEPH_LINGER_ID_START; osdc->linger_requests = RB_ROOT; osdc->map_checks = RB_ROOT; osdc->linger_map_checks = RB_ROOT; -- cgit From bc79c9851a76d76f269d9ef5150e180825650b67 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Thu, 10 Nov 2016 16:10:44 -0500 Subject: PCI: VMD: Update filename to reflect move Updating MAINTAINERS to reflect the new location of the VMD driver. Signed-off-by: Keith Busch Signed-off-by: Bjorn Helgaas --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 906e96948520..aefa6bf1782e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9318,7 +9318,7 @@ PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD) M: Keith Busch L: linux-pci@vger.kernel.org S: Supported -F: arch/x86/pci/vmd.c +F: drivers/pci/host/vmd.c PCIE DRIVER FOR ST SPEAR13XX M: Pratyush Anand -- cgit From e5581fe2b4f40e54bfea9a1eee1bc487da52e98c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 8 Nov 2016 16:38:00 +1000 Subject: drm/udl: make control msg static const. (v2) Thou shall not send control msg from the stack, does that mean I can send it from the RO memory area? and it looks like the answer is no, so here's v2 which kmemdups. Reported-by: poma Tested-by: poma Signed-off-by: Dave Airlie --- drivers/gpu/drm/udl/udl_main.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/udl/udl_main.c b/drivers/gpu/drm/udl/udl_main.c index 29f0207fa677..873f010d9616 100644 --- a/drivers/gpu/drm/udl/udl_main.c +++ b/drivers/gpu/drm/udl/udl_main.c @@ -98,17 +98,23 @@ success: static int udl_select_std_channel(struct udl_device *udl) { int ret; - u8 set_def_chn[] = {0x57, 0xCD, 0xDC, 0xA7, - 0x1C, 0x88, 0x5E, 0x15, - 0x60, 0xFE, 0xC6, 0x97, - 0x16, 0x3D, 0x47, 0xF2}; + static const u8 set_def_chn[] = {0x57, 0xCD, 0xDC, 0xA7, + 0x1C, 0x88, 0x5E, 0x15, + 0x60, 0xFE, 0xC6, 0x97, + 0x16, 0x3D, 0x47, 0xF2}; + void *sendbuf; + + sendbuf = kmemdup(set_def_chn, sizeof(set_def_chn), GFP_KERNEL); + if (!sendbuf) + return -ENOMEM; ret = usb_control_msg(udl->udev, usb_sndctrlpipe(udl->udev, 0), NR_USB_REQUEST_CHANNEL, (USB_DIR_OUT | USB_TYPE_VENDOR), 0, 0, - set_def_chn, sizeof(set_def_chn), + sendbuf, sizeof(set_def_chn), USB_CTRL_SET_TIMEOUT); + kfree(sendbuf); return ret < 0 ? ret : 0; } -- cgit From e519e7774784f3fa7728657d780863805ed1c983 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 10 Nov 2016 18:32:13 -0500 Subject: splice: remove detritus from generic_file_splice_read() i_size check is a leftover from the horrors that used to play with the page cache in that function. With the switch to ->read_iter(), it's neither needed nor correct - for gfs2 it ends up being buggy, since i_size is not guaranteed to be correct until later (inside ->read_iter()). Spotted-by: Abhi Das Signed-off-by: Al Viro --- fs/splice.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/splice.c b/fs/splice.c index 153d4f3bd441..dcaf185a5731 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -299,13 +299,8 @@ ssize_t generic_file_splice_read(struct file *in, loff_t *ppos, { struct iov_iter to; struct kiocb kiocb; - loff_t isize; int idx, ret; - isize = i_size_read(in->f_mapping->host); - if (unlikely(*ppos >= isize)) - return 0; - iov_iter_pipe(&to, ITER_PIPE | READ, pipe, len); idx = to.idx; init_sync_kiocb(&kiocb, in); -- cgit From 6f75c3fd56daf547d684127a7f83c283c3c160d1 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 9 Nov 2016 17:21:08 -0800 Subject: PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails Consider two devices, A and B, where B is a child of A, and B utilizes asynchronous suspend (it does not matter whether A is sync or async). If B fails to suspend_noirq() or suspend_late(), or is interrupted by a wakeup (pm_wakeup_pending()), then it aborts and sets the async_error variable. However, device A does not (immediately) check the async_error variable; it may continue to run its own suspend_noirq()/suspend_late() callback. This is bad. We can resolve this problem by doing our error and wakeup checking (particularly, for the async_error flag) after waiting for children to suspend, instead of before. This also helps align the logic for the noirq and late suspend cases with the logic in __device_suspend(). It's easy to observe this erroneous behavior by, for example, forcing a device to sleep a bit in its suspend_noirq() (to ensure the parent is waiting for the child to complete), then return an error, and watch the parent suspend_noirq() still get called. (Or similarly, fake a wakeup event at the right (or is it wrong?) time.) Fixes: de377b397272 (PM / sleep: Asynchronous threads for suspend_late) Fixes: 28b6fd6e3779 (PM / sleep: Asynchronous threads for suspend_noirq) Reported-by: Jeffy Chen Signed-off-by: Brian Norris Signed-off-by: Rafael J. Wysocki --- drivers/base/power/main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index e44944f4be77..2932a5bd892f 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -1027,6 +1027,8 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a TRACE_DEVICE(dev); TRACE_SUSPEND(0); + dpm_wait_for_children(dev, async); + if (async_error) goto Complete; @@ -1038,8 +1040,6 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a if (dev->power.syscore || dev->power.direct_complete) goto Complete; - dpm_wait_for_children(dev, async); - if (dev->pm_domain) { info = "noirq power domain "; callback = pm_noirq_op(&dev->pm_domain->ops, state); @@ -1174,6 +1174,8 @@ static int __device_suspend_late(struct device *dev, pm_message_t state, bool as __pm_runtime_disable(dev, false); + dpm_wait_for_children(dev, async); + if (async_error) goto Complete; @@ -1185,8 +1187,6 @@ static int __device_suspend_late(struct device *dev, pm_message_t state, bool as if (dev->power.syscore || dev->power.direct_complete) goto Complete; - dpm_wait_for_children(dev, async); - if (dev->pm_domain) { info = "late power domain "; callback = pm_late_early_op(&dev->pm_domain->ops, state); -- cgit From d786810b2f896854506e7b698a137f074942e410 Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Tue, 8 Nov 2016 13:54:41 -0500 Subject: perf/x86/intel/uncore: Add more Intel uncore IMC PCI IDs for SkyLake Several uncore IMC PCI IDs are missed for Intel SkyLake. Add the PCI IDs for SkyLake Y, U, H and S platforms. Rename the ID macros for 0x191f and 0x190c. The corresponding bug: https://bugzilla.kernel.org/show_bug.cgi?id=187301 The related datasheets are also attached in the bug entry for permanent reference. Reported-by: Ben Widawsky Tested-by: Ben Widawsky Signed-off-by: Kan Liang Reviewed-by: Ben Widawsky Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Link: http://lkml.kernel.org/r/1478631281-5061-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar --- arch/x86/events/intel/uncore_snb.c | 32 ++++++++++++++++++++++++++++---- 1 file changed, 28 insertions(+), 4 deletions(-) diff --git a/arch/x86/events/intel/uncore_snb.c b/arch/x86/events/intel/uncore_snb.c index 5f845eef9a4d..81195cca7eae 100644 --- a/arch/x86/events/intel/uncore_snb.c +++ b/arch/x86/events/intel/uncore_snb.c @@ -8,8 +8,12 @@ #define PCI_DEVICE_ID_INTEL_HSW_IMC 0x0c00 #define PCI_DEVICE_ID_INTEL_HSW_U_IMC 0x0a04 #define PCI_DEVICE_ID_INTEL_BDW_IMC 0x1604 -#define PCI_DEVICE_ID_INTEL_SKL_IMC 0x191f -#define PCI_DEVICE_ID_INTEL_SKL_U_IMC 0x190c +#define PCI_DEVICE_ID_INTEL_SKL_U_IMC 0x1904 +#define PCI_DEVICE_ID_INTEL_SKL_Y_IMC 0x190c +#define PCI_DEVICE_ID_INTEL_SKL_HD_IMC 0x1900 +#define PCI_DEVICE_ID_INTEL_SKL_HQ_IMC 0x1910 +#define PCI_DEVICE_ID_INTEL_SKL_SD_IMC 0x190f +#define PCI_DEVICE_ID_INTEL_SKL_SQ_IMC 0x191f /* SNB event control */ #define SNB_UNC_CTL_EV_SEL_MASK 0x000000ff @@ -616,13 +620,29 @@ static const struct pci_device_id bdw_uncore_pci_ids[] = { static const struct pci_device_id skl_uncore_pci_ids[] = { { /* IMC */ - PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_IMC), + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_Y_IMC), .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), }, { /* IMC */ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_U_IMC), .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_HD_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_HQ_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_SD_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_SQ_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, { /* end: all zeroes */ }, }; @@ -666,8 +686,12 @@ static const struct imc_uncore_pci_dev desktop_imc_pci_ids[] = { IMC_DEV(HSW_IMC, &hsw_uncore_pci_driver), /* 4th Gen Core Processor */ IMC_DEV(HSW_U_IMC, &hsw_uncore_pci_driver), /* 4th Gen Core ULT Mobile Processor */ IMC_DEV(BDW_IMC, &bdw_uncore_pci_driver), /* 5th Gen Core U */ - IMC_DEV(SKL_IMC, &skl_uncore_pci_driver), /* 6th Gen Core */ + IMC_DEV(SKL_Y_IMC, &skl_uncore_pci_driver), /* 6th Gen Core Y */ IMC_DEV(SKL_U_IMC, &skl_uncore_pci_driver), /* 6th Gen Core U */ + IMC_DEV(SKL_HD_IMC, &skl_uncore_pci_driver), /* 6th Gen Core H Dual Core */ + IMC_DEV(SKL_HQ_IMC, &skl_uncore_pci_driver), /* 6th Gen Core H Quad Core */ + IMC_DEV(SKL_SD_IMC, &skl_uncore_pci_driver), /* 6th Gen Core S Dual Core */ + IMC_DEV(SKL_SQ_IMC, &skl_uncore_pci_driver), /* 6th Gen Core S Quad Core */ { /* end marker */ } }; -- cgit From 9e80c719a82be2399bb06eab6cd27cb97aa59742 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Thu, 10 Nov 2016 10:46:04 -0800 Subject: mm: remove extra newline from allocation stall warning Commit 63f53dea0c98 ("mm: warn about allocations which stall for too long") by error embedded "\n" in the format string, resulting in strange output. [ 722.876655] kworker/0:1: page alloction stalls for 160001ms, order:0 [ 722.876656] , mode:0x2400000(GFP_NOIO) [ 722.876657] CPU: 0 PID: 6966 Comm: kworker/0:1 Not tainted 4.8.0+ #69 Link: http://lkml.kernel.org/r/1476026219-7974-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 072d791dce2d..6de9440e3ae2 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3658,7 +3658,7 @@ retry: /* Make sure we know about allocations which stall for too long */ if (time_after(jiffies, alloc_start + stall_timeout)) { warn_alloc(gfp_mask, - "page alloction stalls for %ums, order:%u\n", + "page allocation stalls for %ums, order:%u", jiffies_to_msecs(jiffies-alloc_start), order); stall_timeout += 10 * HZ; } -- cgit From 5e322beefc8699b5747cfb35539a9496034e4296 Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Thu, 10 Nov 2016 10:46:07 -0800 Subject: mm, frontswap: make sure allocated frontswap map is assigned Christian Borntraeger reports: With commit 8ea1d2a1985a ("mm, frontswap: convert frontswap_enabled to static key") kmemleak complains about a memory leak in swapon unreferenced object 0x3e09ba56000 (size 32112640): comm "swapon", pid 7852, jiffies 4294968787 (age 1490.770s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: __vmalloc_node_range+0x194/0x2d8 vzalloc+0x58/0x68 SyS_swapon+0xd60/0x12f8 system_call+0xd6/0x270 Turns out kmemleak is right. We now allocate the frontswap map depending on the kernel config (and no longer on the enablement) swapfile.c: [...] if (IS_ENABLED(CONFIG_FRONTSWAP)) frontswap_map = vzalloc(BITS_TO_LONGS(maxpages) * sizeof(long)); but later on this is passed along --> enable_swap_info(p, prio, swap_map, cluster_info, frontswap_map); and ignored if frontswap is disabled --> frontswap_init(p->type, frontswap_map); static inline void frontswap_init(unsigned type, unsigned long *map) { if (frontswap_enabled()) __frontswap_init(type, map); } Thing is, that frontswap map is never freed. The leakage is relatively not that bad, because swapon is an infrequent and privileged operation. However, if the first frontswap backend is registered after a swap type has been already enabled, it will WARN_ON in frontswap_register_ops() and frontswap will not be available for the swap type. Fix this by making sure the map is assigned by frontswap_init() as long as CONFIG_FRONTSWAP is enabled. Fixes: 8ea1d2a1985a ("mm, frontswap: convert frontswap_enabled to static key") Link: http://lkml.kernel.org/r/20161026134220.2566-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka Reported-by: Christian Borntraeger Cc: Konrad Rzeszutek Wilk Cc: Boris Ostrovsky Cc: David Vrabel Cc: Juergen Gross Cc: "Kirill A. Shutemov" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/frontswap.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/linux/frontswap.h b/include/linux/frontswap.h index c46d2aa16d81..1d18af034554 100644 --- a/include/linux/frontswap.h +++ b/include/linux/frontswap.h @@ -106,8 +106,9 @@ static inline void frontswap_invalidate_area(unsigned type) static inline void frontswap_init(unsigned type, unsigned long *map) { - if (frontswap_enabled()) - __frontswap_init(type, map); +#ifdef CONFIG_FRONTSWAP + __frontswap_init(type, map); +#endif } #endif /* _LINUX_FRONTSWAP_H */ -- cgit From 9956edf37e65e93fbb76dcff1236dff2323d306a Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 10 Nov 2016 10:46:11 -0800 Subject: shmem: fix pageflags after swapping DMA32 object If shmem_alloc_page() does not set PageLocked and PageSwapBacked, then shmem_replace_page() needs to do so for itself. Without this, it puts newpage on the wrong lru, re-unlocks the unlocked newpage, and system descends into "Bad page" reports and freeze; or if CONFIG_DEBUG_VM=y, it hits an earlier VM_BUG_ON_PAGE(!PageLocked), depending on config. But shmem_replace_page() is not a common path: it's only called when swapin (or swapoff) finds the page was already read into an unsuitable zone: usually all zones are suitable, but gem objects for a few drm devices (gma500, omapdrm, crestline, broadwater) require zone DMA32 if there's more than 4GB of ram. Fixes: 800d8c63b2e9 ("shmem: add huge pages support") Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1611062003510.11253@eggly.anvils Signed-off-by: Hugh Dickins Acked-by: Kirill A. Shutemov Cc: [4.8.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/shmem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/shmem.c b/mm/shmem.c index ad7813d73ea7..166ebf5d2bce 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -1483,6 +1483,8 @@ static int shmem_replace_page(struct page **pagep, gfp_t gfp, copy_highpage(newpage, oldpage); flush_dcache_page(newpage); + __SetPageLocked(newpage); + __SetPageSwapBacked(newpage); SetPageUptodate(newpage); set_page_private(newpage, swap_index); SetPageSwapCache(newpage); -- cgit From eef06b82f16c78dc0197e3e9d5b2230647a890ff Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 10 Nov 2016 10:46:13 -0800 Subject: scripts/bloat-o-meter: fix SIGPIPE Fix piping output to a program which quickly exits (read: head -n1) $ ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux | head -n1 add/remove: 0/0 grow/shrink: 9/60 up/down: 124/-305 (-181) close failed in file object destructor: sys.excepthook is missing lost sys.stderr Link: http://lkml.kernel.org/r/20161028204618.GA29923@avx2 Signed-off-by: Alexey Dobriyan Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/bloat-o-meter | 3 +++ 1 file changed, 3 insertions(+) diff --git a/scripts/bloat-o-meter b/scripts/bloat-o-meter index 19f5adfd877d..d9ff038c1b28 100755 --- a/scripts/bloat-o-meter +++ b/scripts/bloat-o-meter @@ -8,6 +8,9 @@ # of the GNU General Public License, incorporated herein by reference. import sys, os, re +from signal import signal, SIGPIPE, SIG_DFL + +signal(SIGPIPE, SIG_DFL) if len(sys.argv) != 3: sys.stderr.write("usage: %s file1 file2\n" % sys.argv[0]) -- cgit From 6b36ba599d602d8a73920fb5c470fe272fac49c1 Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Thu, 10 Nov 2016 10:46:16 -0800 Subject: mm/cma.c: check the max limit for cma allocation CMA allocation request size is represented by size_t that gets truncated when same is passed as int to bitmap_find_next_zero_area_off. We observe that during fuzz testing when cma allocation request is too high, bitmap_find_next_zero_area_off still returns success due to the truncation. This leads to kernel crash, as subsequent code assumes that requested memory is available. Fail cma allocation in case the request breaches the corresponding cma region size. Link: http://lkml.kernel.org/r/1478189211-3467-1-git-send-email-shashim@codeaurora.org Signed-off-by: Shiraz Hashim Cc: Catalin Marinas Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/cma.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/cma.c b/mm/cma.c index 384c2cb51b56..c960459eda7e 100644 --- a/mm/cma.c +++ b/mm/cma.c @@ -385,6 +385,9 @@ struct page *cma_alloc(struct cma *cma, size_t count, unsigned int align) bitmap_maxno = cma_bitmap_maxno(cma); bitmap_count = cma_bitmap_pages_to_bits(cma, count); + if (bitmap_count > bitmap_maxno) + return NULL; + for (;;) { mutex_lock(&cma->lock); bitmap_no = bitmap_find_next_zero_area_off(cma->bitmap, -- cgit From dd111be69114cc867f8e826284559bfbc1c40e37 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Thu, 10 Nov 2016 10:46:19 -0800 Subject: swapfile: fix memory corruption via malformed swapfile When root activates a swap partition whose header has the wrong endianness, nr_badpages elements of badpages are swabbed before nr_badpages has been checked, leading to a buffer overrun of up to 8GB. This normally is not a security issue because it can only be exploited by root (more specifically, a process with CAP_SYS_ADMIN or the ability to modify a swap file/partition), and such a process can already e.g. modify swapped-out memory of any other userspace process on the system. Link: http://lkml.kernel.org/r/1477949533-2509-1-git-send-email-jann@thejh.net Signed-off-by: Jann Horn Acked-by: Kees Cook Acked-by: Jerome Marchand Acked-by: Johannes Weiner Cc: "Kirill A. Shutemov" Cc: Vlastimil Babka Cc: Hugh Dickins Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/swapfile.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/swapfile.c b/mm/swapfile.c index 2210de290b54..f30438970cd1 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -2224,6 +2224,8 @@ static unsigned long read_swap_header(struct swap_info_struct *p, swab32s(&swap_header->info.version); swab32s(&swap_header->info.last_page); swab32s(&swap_header->info.nr_badpages); + if (swap_header->info.nr_badpages > MAX_SWAP_BADPAGES) + return 0; for (i = 0; i < swap_header->info.nr_badpages; i++) swab32s(&swap_header->info.badpages[i]); } -- cgit From c3901e722b2975666f42748340df798114742d6d Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Thu, 10 Nov 2016 10:46:23 -0800 Subject: mm: hwpoison: fix thp split handling in memory_failure() When memory_failure() runs on a thp tail page after pmd is split, we trigger the following VM_BUG_ON_PAGE(): page:ffffd7cd819b0040 count:0 mapcount:0 mapping: (null) index:0x1 flags: 0x1fffc000400000(hwpoison) page dumped because: VM_BUG_ON_PAGE(!page_count(p)) ------------[ cut here ]------------ kernel BUG at /src/linux-dev/mm/memory-failure.c:1132! memory_failure() passed refcount and page lock from tail page to head page, which is not needed because we can pass any subpage to split_huge_page(). Fixes: 61f5d698cc97 ("mm: re-enable THP") Link: http://lkml.kernel.org/r/1477961577-7183-1-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi Cc: [4.5+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index de88f33519c0..19e796d36a62 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1112,10 +1112,10 @@ int memory_failure(unsigned long pfn, int trapno, int flags) } if (!PageHuge(p) && PageTransHuge(hpage)) { - lock_page(hpage); - if (!PageAnon(hpage) || unlikely(split_huge_page(hpage))) { - unlock_page(hpage); - if (!PageAnon(hpage)) + lock_page(p); + if (!PageAnon(p) || unlikely(split_huge_page(p))) { + unlock_page(p); + if (!PageAnon(p)) pr_err("Memory failure: %#lx: non anonymous thp\n", pfn); else @@ -1126,9 +1126,7 @@ int memory_failure(unsigned long pfn, int trapno, int flags) put_hwpoison_page(p); return -EBUSY; } - unlock_page(hpage); - get_hwpoison_page(p); - put_hwpoison_page(hpage); + unlock_page(p); VM_BUG_ON_PAGE(!page_count(p), p); hpage = compound_head(p); } -- cgit From c6c7d83b9c9e6a8b3e6d84c820ac61fbffc9e396 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 10 Nov 2016 10:46:26 -0800 Subject: Revert "console: don't prefer first registered if DT specifies stdout-path" This reverts commit 05fd007e4629 ("console: don't prefer first registered if DT specifies stdout-path"). The reverted commit changes existing behavior on which many ARM boards rely. Many ARM small-board-computers, like e.g. the Raspberry Pi have both a video output and a serial console. Depending on whether the user is using the device as a more regular computer; or as a headless device we need to have the console on either one or the other. Many users rely on the kernel behavior of the console being present on both outputs, before the reverted commit the console setup with no console= kernel arguments on an ARM board which sets stdout-path in dt would look like this: [root@localhost ~]# cat /proc/consoles ttyS0 -W- (EC p a) 4:64 tty0 -WU (E p ) 4:1 Where as after the reverted commit, it looks like this: [root@localhost ~]# cat /proc/consoles ttyS0 -W- (EC p a) 4:64 This commit reverts commit 05fd007e4629 ("console: don't prefer first registered if DT specifies stdout-path") restoring the original behavior. Fixes: 05fd007e4629 ("console: don't prefer first registered if DT specifies stdout-path") Link: http://lkml.kernel.org/r/20161104121135.4780-2-hdegoede@redhat.com Signed-off-by: Hans de Goede Cc: Paul Burton Cc: Rob Herring Cc: Frank Rowand Cc: Thorsten Leemhuis Cc: Greg Kroah-Hartman Cc: Tejun Heo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/of/base.c | 2 -- include/linux/console.h | 6 ------ kernel/printk/printk.c | 13 +------------ 3 files changed, 1 insertion(+), 20 deletions(-) diff --git a/drivers/of/base.c b/drivers/of/base.c index d687e6de24a0..a0bccb54a9bd 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -2077,8 +2077,6 @@ void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align)) name = of_get_property(of_aliases, "stdout", NULL); if (name) of_stdout = of_find_node_opts_by_path(name, &of_stdout_options); - if (of_stdout) - console_set_by_of(); } if (!of_aliases) diff --git a/include/linux/console.h b/include/linux/console.h index 3672809234a7..d530c4627e54 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -173,12 +173,6 @@ static inline void console_sysfs_notify(void) #endif extern bool console_suspend_enabled; -#ifdef CONFIG_OF -extern void console_set_by_of(void); -#else -static inline void console_set_by_of(void) {} -#endif - /* Suspend and resume console messages over PM events */ extern void suspend_console(void); extern void resume_console(void); diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index de08fc90baaf..5028f4fd504a 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -253,17 +253,6 @@ static int preferred_console = -1; int console_set_on_cmdline; EXPORT_SYMBOL(console_set_on_cmdline); -#ifdef CONFIG_OF -static bool of_specified_console; - -void console_set_by_of(void) -{ - of_specified_console = true; -} -#else -# define of_specified_console false -#endif - /* Flag: console code may call schedule() */ static int console_may_schedule; @@ -2657,7 +2646,7 @@ void register_console(struct console *newcon) * didn't select a console we take the first one * that registers here. */ - if (preferred_console < 0 && !of_specified_console) { + if (preferred_console < 0) { if (newcon->index < 0) newcon->index = 0; if (newcon->setup == NULL || -- cgit From d006c71f8ad2663dd47f81bf96bf655eeed428e2 Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Thu, 10 Nov 2016 10:46:29 -0800 Subject: ocfs2: fix not enough credit panic The following panic was caught when run ocfs2 disconfig single test (block size 512 and cluster size 8192). ocfs2_journal_dirty() return -ENOSPC, that means credits were used up. The total credit should include 3 times of "num_dx_leaves" from ocfs2_dx_dir_rebalance(), because 2 times will be consumed in ocfs2_dx_dir_transfer_leaf() and 1 time will be consumed in ocfs2_dx_dir_new_cluster() -> __ocfs2_dx_dir_new_cluster() -> ocfs2_dx_dir_format_cluster(). But only two times is included in ocfs2_dx_dir_rebalance_credits(), fix it. This can cause read-only fs(v4.1+) or panic for mainline linux depending on mount option. ------------[ cut here ]------------ kernel BUG at fs/ocfs2/journal.c:775! invalid opcode: 0000 [#1] SMP Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea parport_pc parport acpi_cpufreq i2c_piix4 i2c_core pcspkr ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix dm_mirror dm_region_hash dm_log dm_mod CPU: 2 PID: 10601 Comm: dd Not tainted 4.1.12-71.el6uek.bug24939243.x86_64 #2 Hardware name: Xen HVM domU, BIOS 4.4.4OVM 02/11/2016 task: ffff8800b6de6200 ti: ffff8800a7d48000 task.ti: ffff8800a7d48000 RIP: ocfs2_journal_dirty+0xa7/0xb0 [ocfs2] RSP: 0018:ffff8800a7d4b6d8 EFLAGS: 00010286 RAX: 00000000ffffffe4 RBX: 00000000814d0a9c RCX: 00000000000004f9 RDX: ffffffffa008e990 RSI: ffffffffa008f1ee RDI: ffff8800622b6460 RBP: ffff8800a7d4b6f8 R08: ffffffffa008f288 R09: ffff8800622b6460 R10: 0000000000000000 R11: 0000000000000282 R12: 0000000002c8421e R13: ffff88006d0cad00 R14: ffff880092beef60 R15: 0000000000000070 FS: 00007f9b83e92700(0000) GS:ffff8800be880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb2c0d1a000 CR3: 0000000008f80000 CR4: 00000000000406e0 Call Trace: ocfs2_dx_dir_transfer_leaf+0x159/0x1a0 [ocfs2] ocfs2_dx_dir_rebalance+0xd9b/0xea0 [ocfs2] ocfs2_find_dir_space_dx+0xd3/0x300 [ocfs2] ocfs2_prepare_dx_dir_for_insert+0x219/0x450 [ocfs2] ocfs2_prepare_dir_for_insert+0x1d6/0x580 [ocfs2] ocfs2_mknod+0x5a2/0x1400 [ocfs2] ocfs2_create+0x73/0x180 [ocfs2] vfs_create+0xd8/0x100 lookup_open+0x185/0x1c0 do_last+0x36d/0x780 path_openat+0x92/0x470 do_filp_open+0x4a/0xa0 do_sys_open+0x11a/0x230 SyS_open+0x1e/0x20 system_call_fastpath+0x12/0x71 Code: 1d 3f 29 09 00 48 85 db 74 1f 48 8b 03 0f 1f 80 00 00 00 00 48 8b 7b 08 48 83 c3 10 4c 89 e6 ff d0 48 8b 03 48 85 c0 75 eb eb 90 <0f> 0b eb fe 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 RIP ocfs2_journal_dirty+0xa7/0xb0 [ocfs2] ---[ end trace 91ac5312a6ee1288 ]--- Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Link: http://lkml.kernel.org/r/1478248135-31963-1-git-send-email-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Cc: Mark Fasheh Cc: Joel Becker Cc: Joseph Qi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c index e7054e2ac922..3ecb9f337b7d 100644 --- a/fs/ocfs2/dir.c +++ b/fs/ocfs2/dir.c @@ -3699,7 +3699,7 @@ static void ocfs2_dx_dir_transfer_leaf(struct inode *dir, u32 split_hash, static int ocfs2_dx_dir_rebalance_credits(struct ocfs2_super *osb, struct ocfs2_dx_root_block *dx_root) { - int credits = ocfs2_clusters_to_blocks(osb->sb, 2); + int credits = ocfs2_clusters_to_blocks(osb->sb, 3); credits += ocfs2_calc_extend_credits(osb->sb, &dx_root->dr_list); credits += ocfs2_quota_trans_credits(osb->sb); -- cgit From 96b96a96ddee4ba08ce4aeb8a558a3271fd4a7a7 Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Thu, 10 Nov 2016 10:46:32 -0800 Subject: mm/hugetlb: fix huge page reservation leak in private mapping error paths Error paths in hugetlb_cow() and hugetlb_no_page() may free a newly allocated huge page. If a reservation was associated with the huge page, alloc_huge_page() consumed the reservation while allocating. When the newly allocated page is freed in free_huge_page(), it will increment the global reservation count. However, the reservation entry in the reserve map will remain. This is not an issue for shared mappings as the entry in the reserve map indicates a reservation exists. But, an entry in a private mapping reserve map indicates the reservation was consumed and no longer exists. This results in an inconsistency between the reserve map and the global reservation count. This 'leaks' a reserved huge page. Create a new routine restore_reserve_on_error() to restore the reserve entry in these specific error paths. This routine makes use of a new function vma_add_reservation() which will add a reserve entry for a specific address/page. In general, these error paths were rarely (if ever) taken on most architectures. However, powerpc contained arch specific code that that resulted in an extra fault and execution of these error paths on all private mappings. Fixes: 67961f9db8c4 ("mm/hugetlb: fix huge page reserve accounting for private mappings) Link: http://lkml.kernel.org/r/1476933077-23091-2-git-send-email-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz Reported-by: Jan Stancek Tested-by: Jan Stancek Reviewed-by: Aneesh Kumar K.V Acked-by: Hillf Danton Cc: Naoya Horiguchi Cc: Michal Hocko Cc: Kirill A . Shutemov Cc: Dave Hansen Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index ec49d9ef1eef..418bf01a50ed 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1826,11 +1826,17 @@ static void return_unused_surplus_pages(struct hstate *h, * is not the case is if a reserve map was changed between calls. It * is the responsibility of the caller to notice the difference and * take appropriate action. + * + * vma_add_reservation is used in error paths where a reservation must + * be restored when a newly allocated huge page must be freed. It is + * to be called after calling vma_needs_reservation to determine if a + * reservation exists. */ enum vma_resv_mode { VMA_NEEDS_RESV, VMA_COMMIT_RESV, VMA_END_RESV, + VMA_ADD_RESV, }; static long __vma_reservation_common(struct hstate *h, struct vm_area_struct *vma, unsigned long addr, @@ -1856,6 +1862,14 @@ static long __vma_reservation_common(struct hstate *h, region_abort(resv, idx, idx + 1); ret = 0; break; + case VMA_ADD_RESV: + if (vma->vm_flags & VM_MAYSHARE) + ret = region_add(resv, idx, idx + 1); + else { + region_abort(resv, idx, idx + 1); + ret = region_del(resv, idx, idx + 1); + } + break; default: BUG(); } @@ -1903,6 +1917,56 @@ static void vma_end_reservation(struct hstate *h, (void)__vma_reservation_common(h, vma, addr, VMA_END_RESV); } +static long vma_add_reservation(struct hstate *h, + struct vm_area_struct *vma, unsigned long addr) +{ + return __vma_reservation_common(h, vma, addr, VMA_ADD_RESV); +} + +/* + * This routine is called to restore a reservation on error paths. In the + * specific error paths, a huge page was allocated (via alloc_huge_page) + * and is about to be freed. If a reservation for the page existed, + * alloc_huge_page would have consumed the reservation and set PagePrivate + * in the newly allocated page. When the page is freed via free_huge_page, + * the global reservation count will be incremented if PagePrivate is set. + * However, free_huge_page can not adjust the reserve map. Adjust the + * reserve map here to be consistent with global reserve count adjustments + * to be made by free_huge_page. + */ +static void restore_reserve_on_error(struct hstate *h, + struct vm_area_struct *vma, unsigned long address, + struct page *page) +{ + if (unlikely(PagePrivate(page))) { + long rc = vma_needs_reservation(h, vma, address); + + if (unlikely(rc < 0)) { + /* + * Rare out of memory condition in reserve map + * manipulation. Clear PagePrivate so that + * global reserve count will not be incremented + * by free_huge_page. This will make it appear + * as though the reservation for this page was + * consumed. This may prevent the task from + * faulting in the page at a later time. This + * is better than inconsistent global huge page + * accounting of reserve counts. + */ + ClearPagePrivate(page); + } else if (rc) { + rc = vma_add_reservation(h, vma, address); + if (unlikely(rc < 0)) + /* + * See above comment about rare out of + * memory condition. + */ + ClearPagePrivate(page); + } else + vma_end_reservation(h, vma, address); + } +} + struct page *alloc_huge_page(struct vm_area_struct *vma, unsigned long addr, int avoid_reserve) { @@ -3498,6 +3562,7 @@ retry_avoidcopy: spin_unlock(ptl); mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end); out_release_all: + restore_reserve_on_error(h, vma, address, new_page); put_page(new_page); out_release_old: put_page(old_page); @@ -3680,6 +3745,7 @@ backout: spin_unlock(ptl); backout_unlocked: unlock_page(page); + restore_reserve_on_error(h, vma, address, page); put_page(page); goto out; } -- cgit From 60da81ea61201f43387793d1cc3f501609d922ed Mon Sep 17 00:00:00 2001 From: Eryu Guan Date: Thu, 10 Nov 2016 10:46:35 -0800 Subject: mm/filemap: don't allow partially uptodate page for pipes Starting from 4.9-rc1 kernel, I started noticing some test failures of sendfile(2) and splice(2) (sendfile0N and splice01 from LTP) when testing on sub-page block size filesystems (tested both XFS and ext4), these syscalls start to return EIO in the tests. e.g. sendfile02 1 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 26, got: -1 sendfile02 2 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 24, got: -1 sendfile02 3 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 22, got: -1 sendfile02 4 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 20, got: -1 This is because that in sub-page block size cases, we don't need the whole page to be uptodate, only the part we care about is uptodate is OK (if fs has ->is_partially_uptodate defined). But page_cache_pipe_buf_confirm() doesn't have the ability to check the partially-uptodate case, it needs the whole page to be uptodate. So it returns EIO in this case. This is a regression introduced by commit 82c156f85384 ("switch generic_file_splice_read() to use of ->read_iter()"). Prior to the change, generic_file_splice_read() doesn't allow partially-uptodate page either, so it worked fine. Fix it by skipping the partially-uptodate check if we're working on a pipe in do_generic_file_read(), so we read the whole page from disk as long as the page is not uptodate. I think the other way to fix it is to add the ability to check & allow partially-uptodate page to page_cache_pipe_buf_confirm(), but that is much harder to do and seems gain little. Link: http://lkml.kernel.org/r/1477986187-12717-1-git-send-email-guaneryu@gmail.com Signed-off-by: Eryu Guan Reviewed-by: Jan Kara Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/filemap.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/filemap.c b/mm/filemap.c index c7fe2f16503f..50b52fe51937 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1732,6 +1732,9 @@ find_page: if (inode->i_blkbits == PAGE_SHIFT || !mapping->a_ops->is_partially_uptodate) goto page_not_up_to_date; + /* pipes can't handle partially uptodate pages */ + if (unlikely(iter->type & ITER_PIPE)) + goto page_not_up_to_date; if (!trylock_page(page)) goto page_not_up_to_date; /* Did it get truncated before we got the lock? */ -- cgit From 70d78fe7c8b640b5acfad56ad341985b3810998a Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Thu, 10 Nov 2016 10:46:38 -0800 Subject: coredump: fix unfreezable coredumping task It could be not possible to freeze coredumping task when it waits for 'core_state->startup' completion, because threads are frozen in get_signal() before they got a chance to complete 'core_state->startup'. Inability to freeze a task during suspend will cause suspend to fail. Also CRIU uses cgroup freezer during dump operation. So with an unfreezable task the CRIU dump will fail because it waits for a transition from 'FREEZING' to 'FROZEN' state which will never happen. Use freezer_do_not_count() to tell freezer to ignore coredumping task while it waits for core_state->startup completion. Link: http://lkml.kernel.org/r/1475225434-3753-1-git-send-email-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin Acked-by: Pavel Machek Acked-by: Oleg Nesterov Cc: Alexander Viro Cc: Tejun Heo Cc: "Rafael J. Wysocki" Cc: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/coredump.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/coredump.c b/fs/coredump.c index 281b768000e6..eb9c92c9b20f 100644 --- a/fs/coredump.c +++ b/fs/coredump.c @@ -1,6 +1,7 @@ #include #include #include +#include #include #include #include @@ -423,7 +424,9 @@ static int coredump_wait(int exit_code, struct core_state *core_state) if (core_waiters > 0) { struct core_thread *ptr; + freezer_do_not_count(); wait_for_completion(&core_state->startup); + freezer_count(); /* * Wait for all the threads to become inactive, so that * all the thread context (extended register state, like -- cgit From f773e36de3d77c4000ca914c9d146f55f2fd51e8 Mon Sep 17 00:00:00 2001 From: Greg Thelen Date: Thu, 10 Nov 2016 10:46:41 -0800 Subject: memcg: prevent memcg caches to be both OFF_SLAB & OBJFREELIST_SLAB While testing OBJFREELIST_SLAB integration with pagealloc, we found a bug where kmem_cache(sys) would be created with both CFLGS_OFF_SLAB & CFLGS_OBJFREELIST_SLAB. When it happened, critical allocations needed for loading drivers or creating new caches will fail. The original kmem_cache is created early making OFF_SLAB not possible. When kmem_cache(sys) is created, OFF_SLAB is possible and if pagealloc is enabled it will try to enable it first under certain conditions. Given kmem_cache(sys) reuses the original flag, you can have both flags at the same time resulting in allocation failures and odd behaviors. This fix discards allocator specific flags from memcg before calling create_cache. The bug exists since 4.6-rc1 and affects testing debug pagealloc configurations. Fixes: b03a017bebc4 ("mm/slab: introduce new slab management type, OBJFREELIST_SLAB") Link: http://lkml.kernel.org/r/1478553075-120242-1-git-send-email-thgarnie@google.com Signed-off-by: Greg Thelen Signed-off-by: Thomas Garnier Tested-by: Thomas Garnier Acked-by: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Vladimir Davydov Cc: Michal Hocko Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slab_common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/slab_common.c b/mm/slab_common.c index 71f0b28a1bec..329b03843863 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -533,8 +533,8 @@ void memcg_create_kmem_cache(struct mem_cgroup *memcg, s = create_cache(cache_name, root_cache->object_size, root_cache->size, root_cache->align, - root_cache->flags, root_cache->ctor, - memcg, root_cache); + root_cache->flags & CACHE_CREATE_MASK, + root_cache->ctor, memcg, root_cache); /* * If we could not create a memcg cache, do not complain, because * that's not critical at all as we can always proceed with the root -- cgit From d7c19b066dcf4bd19c4385e8065558d4e74f9e73 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Thu, 10 Nov 2016 10:46:44 -0800 Subject: mm: kmemleak: scan .data.ro_after_init Limit the number of kmemleak false positives by including .data.ro_after_init in memory scanning. To achieve this we need to add symbols for start and end of the section to the linker scripts. The problem was been uncovered by commit 56989f6d8568 ("genetlink: mark families as __ro_after_init"). Link: http://lkml.kernel.org/r/1478274173-15218-1-git-send-email-jakub.kicinski@netronome.com Reviewed-by: Catalin Marinas Signed-off-by: Jakub Kicinski Cc: Arnd Bergmann Cc: Cong Wang Cc: Johannes Berg Cc: Martin Schwidefsky Cc: Heiko Carstens Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/vmlinux.lds.S | 2 ++ include/asm-generic/sections.h | 3 +++ include/asm-generic/vmlinux.lds.h | 5 ++++- mm/kmemleak.c | 1 + 4 files changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 000e6e91f6a0..3667d20e997f 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -62,9 +62,11 @@ SECTIONS . = ALIGN(PAGE_SIZE); __start_ro_after_init = .; + __start_data_ro_after_init = .; .data..ro_after_init : { *(.data..ro_after_init) } + __end_data_ro_after_init = .; EXCEPTION_TABLE(16) . = ALIGN(PAGE_SIZE); __end_ro_after_init = .; diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h index af0254c09424..4df64a1fc09e 100644 --- a/include/asm-generic/sections.h +++ b/include/asm-generic/sections.h @@ -14,6 +14,8 @@ * [_sdata, _edata]: contains .data.* sections, may also contain .rodata.* * and/or .init.* sections. * [__start_rodata, __end_rodata]: contains .rodata.* sections + * [__start_data_ro_after_init, __end_data_ro_after_init]: + * contains data.ro_after_init section * [__init_begin, __init_end]: contains .init.* sections, but .init.text.* * may be out of this range on some architectures. * [_sinittext, _einittext]: contains .init.text.* sections @@ -31,6 +33,7 @@ extern char _data[], _sdata[], _edata[]; extern char __bss_start[], __bss_stop[]; extern char __init_begin[], __init_end[]; extern char _sinittext[], _einittext[]; +extern char __start_data_ro_after_init[], __end_data_ro_after_init[]; extern char _end[]; extern char __per_cpu_load[], __per_cpu_start[], __per_cpu_end[]; extern char __kprobes_text_start[], __kprobes_text_end[]; diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 30747960bc54..31e1d639abed 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -259,7 +259,10 @@ * own by defining an empty RO_AFTER_INIT_DATA. */ #ifndef RO_AFTER_INIT_DATA -#define RO_AFTER_INIT_DATA *(.data..ro_after_init) +#define RO_AFTER_INIT_DATA \ + __start_data_ro_after_init = .; \ + *(.data..ro_after_init) \ + __end_data_ro_after_init = .; #endif /* diff --git a/mm/kmemleak.c b/mm/kmemleak.c index e5355a5b423f..d1380ed93fdf 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1414,6 +1414,7 @@ static void kmemleak_scan(void) /* data/bss scanning */ scan_large_block(_sdata, _edata); scan_large_block(__bss_start, __bss_stop); + scan_large_block(__start_data_ro_after_init, __end_data_ro_after_init); #ifdef CONFIG_SMP /* per-cpu sections scanning */ -- cgit From ae65a21fb851f09bf6341761d884fb86b644b75a Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 10 Nov 2016 10:46:47 -0800 Subject: lib/stackdepot: export save/fetch stack for drivers Some drivers would like to record stacktraces in order to aide leak tracing. As stackdepot already provides a facility for only storing the unique traces, thereby reducing the memory required, export that functionality for use by drivers. The code was originally created for KASAN and moved under lib in commit cd11016e5f521 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") so that it could be shared with mm/. In turn, we want to share it now with drivers. Link: http://lkml.kernel.org/r/20161108133209.22704-1-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson Cc: Andrey Ryabinin Cc: Alexander Potapenko Cc: Dmitry Vyukov Cc: Joonsoo Kim Cc: "Kirill A. Shutemov" Cc: Daniel Vetter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/stackdepot.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/lib/stackdepot.c b/lib/stackdepot.c index 4d830e299989..f87d138e9672 100644 --- a/lib/stackdepot.c +++ b/lib/stackdepot.c @@ -192,6 +192,7 @@ void depot_fetch_stack(depot_stack_handle_t handle, struct stack_trace *trace) trace->entries = stack->entries; trace->skip = 0; } +EXPORT_SYMBOL_GPL(depot_fetch_stack); /** * depot_save_stack - save stack in a stack depot. @@ -283,3 +284,4 @@ exit: fast_exit: return retval; } +EXPORT_SYMBOL_GPL(depot_save_stack); -- cgit From a76bcf557ef408b368cf26f52a60865bfc27b632 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:44 +0100 Subject: Kbuild: enable -Wmaybe-uninitialized warning for "make W=1" Traditionally, we have always had warnings about uninitialized variables enabled, as this is part of -Wall, and generally a good idea [1], but it also always produced false positives, mainly because this is a variation of the halting problem and provably impossible to get right in all cases [2]. Various people have identified cases that are particularly bad for false positives, and in commit e74fc973b6e5 ("Turn off -Wmaybe-uninitialized when building with -Os"), I turned off the warning for any build that was done with CC_OPTIMIZE_FOR_SIZE. This drastically reduced the number of false positive warnings in the default build but unfortunately had the side effect of turning the warning off completely in 'allmodconfig' builds, which in turn led to a lot of warnings (both actual bugs, and remaining false positives) to go in unnoticed. With commit 877417e6ffb9 ("Kbuild: change CC_OPTIMIZE_FOR_SIZE definition") enabled the warning again for allmodconfig builds in v4.7 and in v4.8-rc1, I had finally managed to address all warnings I get in an ARM allmodconfig build and most other maybe-uninitialized warnings for ARM randconfig builds. However, commit 6e8d666e9253 ("Disable "maybe-uninitialized" warning globally") was merged at the same time and disabled it completely for all configurations, because of false-positive warnings on x86 that I had not addressed until then. This caused a lot of actual bugs to get merged into mainline, and I sent several dozen patches for these during the v4.9 development cycle. Most of these are actual bugs, some are for correct code that is safe because it is only called under external constraints that make it impossible to run into the case that gcc sees, and in a few cases gcc is just stupid and finds something that can obviously never happen. I have now done a few thousand randconfig builds on x86 and collected all patches that I needed to address every single warning I got (I can provide the combined patch for the other warnings if anyone is interested), so I hope we can get the warning back and let people catch the actual bugs earlier. This reverts the change to disable the warning completely and for now brings it back at the "make W=1" level, so we can get it merged into mainline without introducing false positives. A follow-up patch enables it on all levels unless some configuration option turns it off because of false-positives. Link: https://rusty.ozlabs.org/?p=232 [1] Link: https://gcc.gnu.org/wiki/Better_Uninitialized_Warnings [2] Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- Makefile | 10 ++++++---- arch/arc/Makefile | 4 +++- scripts/Makefile.extrawarn | 3 +++ scripts/Makefile.ubsan | 4 ++++ 4 files changed, 16 insertions(+), 5 deletions(-) diff --git a/Makefile b/Makefile index f97f786de58d..06e2b73978e8 100644 --- a/Makefile +++ b/Makefile @@ -370,7 +370,7 @@ LDFLAGS_MODULE = CFLAGS_KERNEL = AFLAGS_KERNEL = LDFLAGS_vmlinux = -CFLAGS_GCOV = -fprofile-arcs -ftest-coverage -fno-tree-loop-im +CFLAGS_GCOV = -fprofile-arcs -ftest-coverage -fno-tree-loop-im -Wno-maybe-uninitialized CFLAGS_KCOV := $(call cc-option,-fsanitize-coverage=trace-pc,) @@ -620,7 +620,6 @@ ARCH_CFLAGS := include arch/$(SRCARCH)/Makefile KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,) -KBUILD_CFLAGS += $(call cc-disable-warning,maybe-uninitialized,) KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION @@ -629,15 +628,18 @@ KBUILD_CFLAGS += $(call cc-option,-fdata-sections,) endif ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE -KBUILD_CFLAGS += -Os +KBUILD_CFLAGS += -Os $(call cc-disable-warning,maybe-uninitialized,) else ifdef CONFIG_PROFILE_ALL_BRANCHES -KBUILD_CFLAGS += -O2 +KBUILD_CFLAGS += -O2 $(call cc-disable-warning,maybe-uninitialized,) else KBUILD_CFLAGS += -O2 endif endif +KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0409, \ + $(call cc-disable-warning,maybe-uninitialized,)) + # Tell gcc to never replace conditional load with a non-conditional one KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0) diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 864adad52280..25f81a1db9f9 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -68,7 +68,9 @@ cflags-$(CONFIG_ARC_DW2_UNWIND) += -fasynchronous-unwind-tables $(cfi) ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE # Generic build system uses -O2, we want -O3 # Note: No need to add to cflags-y as that happens anyways -ARCH_CFLAGS += -O3 +# +# Disable the false maybe-uninitialized warings gcc spits out at -O3 +ARCH_CFLAGS += -O3 $(call cc-disable-warning,maybe-uninitialized,) endif # small data is default for elf32 tool-chain. If not usable, disable it diff --git a/scripts/Makefile.extrawarn b/scripts/Makefile.extrawarn index 53449a6ff6aa..7fc2c5a3dbbe 100644 --- a/scripts/Makefile.extrawarn +++ b/scripts/Makefile.extrawarn @@ -36,6 +36,7 @@ warning-2 += -Wshadow warning-2 += $(call cc-option, -Wlogical-op) warning-2 += $(call cc-option, -Wmissing-field-initializers) warning-2 += $(call cc-option, -Wsign-compare) +warning-2 += $(call cc-option, -Wmaybe-uninitialized) warning-3 := -Wbad-function-cast warning-3 += -Wcast-qual @@ -59,6 +60,8 @@ endif KBUILD_CFLAGS += $(warning) else +KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized) + ifeq ($(cc-name),clang) KBUILD_CFLAGS += $(call cc-disable-warning, initializer-overrides) KBUILD_CFLAGS += $(call cc-disable-warning, unused-value) diff --git a/scripts/Makefile.ubsan b/scripts/Makefile.ubsan index dd779c40c8e6..3b1b13818d59 100644 --- a/scripts/Makefile.ubsan +++ b/scripts/Makefile.ubsan @@ -17,4 +17,8 @@ endif ifdef CONFIG_UBSAN_NULL CFLAGS_UBSAN += $(call cc-option, -fsanitize=null) endif + + # -fsanitize=* options makes GCC less smart than usual and + # increase number of 'maybe-uninitialized false-positives + CFLAGS_UBSAN += $(call cc-option, -Wno-maybe-uninitialized) endif -- cgit From e84efa32b9d2763fb92e73c8942100d8f55ad4ed Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:45 +0100 Subject: NFSv4.1: work around -Wmaybe-uninitialized warning A bugfix introduced a harmless gcc warning in nfs4_slot_seqid_in_use if we enable -Wmaybe-uninitialized again: fs/nfs/nfs4session.c:203:54: error: 'cur_seq' may be used uninitialized in this function [-Werror=maybe-uninitialized] gcc is not smart enough to conclude that the IS_ERR/PTR_ERR pair results in a nonzero return value here. Using PTR_ERR_OR_ZERO() instead makes this clear to the compiler. Fixes: e09c978aae5b ("NFSv4.1: Fix Oopsable condition in server callback races") Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- fs/nfs/nfs4session.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/nfs/nfs4session.c b/fs/nfs/nfs4session.c index b62973045a3e..150c5a1879bf 100644 --- a/fs/nfs/nfs4session.c +++ b/fs/nfs/nfs4session.c @@ -178,12 +178,14 @@ static int nfs4_slot_get_seqid(struct nfs4_slot_table *tbl, u32 slotid, __must_hold(&tbl->slot_tbl_lock) { struct nfs4_slot *slot; + int ret; slot = nfs4_lookup_slot(tbl, slotid); - if (IS_ERR(slot)) - return PTR_ERR(slot); - *seq_nr = slot->seq_nr; - return 0; + ret = PTR_ERR_OR_ZERO(slot); + if (!ret) + *seq_nr = slot->seq_nr; + + return ret; } /* -- cgit From 3a6d867612dce2035ca50cb02e7871d27c86aa72 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:46 +0100 Subject: x86: apm: avoid uninitialized data MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit apm_bios_call() can fail, and return a status in its argument structure. If that status however is zero during a call from apm_get_power_status(), we end up using data that may have never been set, as reported by "gcc -Wmaybe-uninitialized": arch/x86/kernel/apm_32.c: In function ‘apm’: arch/x86/kernel/apm_32.c:1729:17: error: ‘bx’ may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/kernel/apm_32.c:1835:5: error: ‘cx’ may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/kernel/apm_32.c:1730:17: note: ‘cx’ was declared here arch/x86/kernel/apm_32.c:1842:27: error: ‘dx’ may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/kernel/apm_32.c:1731:17: note: ‘dx’ was declared here This changes the function to return "APM_NO_ERROR" here, which makes the code more robust to broken BIOS versions, and avoids the warning. Signed-off-by: Arnd Bergmann Reviewed-by: Jiri Kosina Reviewed-by: Luis R. Rodriguez Signed-off-by: Linus Torvalds --- arch/x86/kernel/apm_32.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index c7364bd633e1..51287cd90bf6 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -1042,8 +1042,11 @@ static int apm_get_power_status(u_short *status, u_short *bat, u_short *life) if (apm_info.get_power_status_broken) return APM_32_UNSUPPORTED; - if (apm_bios_call(&call)) + if (apm_bios_call(&call)) { + if (!call.err) + return APM_NO_ERROR; return call.err; + } *status = call.ebx; *bat = call.ecx; if (apm_info.get_power_status_swabinminutes) { -- cgit From 069013a9e2bbf1ace3f796cb664023dcd40730f7 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:47 +0100 Subject: nios2: fix timer initcall return value When called more than twice, the nios2_time_init() function return an uninitialized value, as detected by gcc -Wmaybe-uninitialized arch/nios2/kernel/time.c: warning: 'ret' may be used uninitialized in this function This makes it return '0' here, matching the comment above the function. Acked-by: Ley Foon Tan Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- arch/nios2/kernel/time.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/nios2/kernel/time.c b/arch/nios2/kernel/time.c index d9563ddb337e..746bf5caaffc 100644 --- a/arch/nios2/kernel/time.c +++ b/arch/nios2/kernel/time.c @@ -324,6 +324,7 @@ static int __init nios2_time_init(struct device_node *timer) ret = nios2_clocksource_init(timer); break; default: + ret = 0; break; } -- cgit From 92dfffee974f75c28b0c89f31318669091de1ec3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:48 +0100 Subject: s390: pci: don't print uninitialized data for debugging gcc correctly warns about an incorrect use of the 'pa' variable in case we pass an empty scatterlist to __s390_dma_map_sg: arch/s390/pci/pci_dma.c: In function '__s390_dma_map_sg': arch/s390/pci/pci_dma.c:309:13: warning: 'pa' may be used uninitialized in this function [-Wmaybe-uninitialized] This adds a bogus initialization to the function to sanitize the debug output. I would have preferred a solution without the initialization, but I only got the report from the kbuild bot after turning on the warning again, and didn't manage to reproduce it myself. Signed-off-by: Arnd Bergmann Acked-by: Sebastian Ott Acked-by: Martin Schwidefsky Signed-off-by: Linus Torvalds --- arch/s390/pci/pci_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c index 7350c8bc13a2..6b2f72f523b9 100644 --- a/arch/s390/pci/pci_dma.c +++ b/arch/s390/pci/pci_dma.c @@ -423,7 +423,7 @@ static int __s390_dma_map_sg(struct device *dev, struct scatterlist *sg, dma_addr_t dma_addr_base, dma_addr; int flags = ZPCI_PTE_VALID; struct scatterlist *s; - unsigned long pa; + unsigned long pa = 0; int ret; size = PAGE_ALIGN(size); -- cgit From ba13e98f2cebd55a3744c5ffaa08f9dca73bf521 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Thu, 10 Nov 2016 17:44:49 +0100 Subject: dib0700: fix nec repeat handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When receiving a nec repeat, ensure the correct scancode is repeated rather than a random value from the stack. This removes the need for the bogus uninitialized_var() and also fixes the warnings: drivers/media/usb/dvb-usb/dib0700_core.c: In function ‘dib0700_rc_urb_completion’: drivers/media/usb/dvb-usb/dib0700_core.c:679: warning: ‘protocol’ may be used uninitialized in this function [sean addon: So after writing the patch and submitting it, I've bought the hardware on ebay. Without this patch you get random scancodes on nec repeats, which the patch indeed fixes.] Signed-off-by: Sean Young Tested-by: Sean Young Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- drivers/media/usb/dvb-usb/dib0700_core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c index 92d5408684ac..47ce9d5de4c6 100644 --- a/drivers/media/usb/dvb-usb/dib0700_core.c +++ b/drivers/media/usb/dvb-usb/dib0700_core.c @@ -704,7 +704,7 @@ static void dib0700_rc_urb_completion(struct urb *purb) struct dvb_usb_device *d = purb->context; struct dib0700_rc_response *poll_reply; enum rc_type protocol; - u32 uninitialized_var(keycode); + u32 keycode; u8 toggle; deb_info("%s()\n", __func__); @@ -745,7 +745,8 @@ static void dib0700_rc_urb_completion(struct urb *purb) poll_reply->nec.data == 0x00 && poll_reply->nec.not_data == 0xff) { poll_reply->data_state = 2; - break; + rc_repeat(d->rc_dev); + goto resubmit; } if ((poll_reply->nec.data ^ poll_reply->nec.not_data) != 0xff) { -- cgit From 9cdbe14fb468586454d26d7ff878e7b698449727 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:50 +0100 Subject: rc: print correct variable for z8f0811 A recent rework accidentally left a debugging printk untouched while changing the meaning of the variables, leading to an uninitialized variable being printed: drivers/media/i2c/ir-kbd-i2c.c: In function 'get_key_haup_common': drivers/media/i2c/ir-kbd-i2c.c:62:2: error: 'toggle' may be used uninitialized in this function [-Werror=maybe-uninitialized] This prints the correct one instead, as we did before the patch. Fixes: 00bb820755ed ("[media] rc: Hauppauge z8f0811 can decode RC6") Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- drivers/media/i2c/ir-kbd-i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/i2c/ir-kbd-i2c.c b/drivers/media/i2c/ir-kbd-i2c.c index f95a6bc839d5..cede3975d04b 100644 --- a/drivers/media/i2c/ir-kbd-i2c.c +++ b/drivers/media/i2c/ir-kbd-i2c.c @@ -118,7 +118,7 @@ static int get_key_haup_common(struct IR_i2c *ir, enum rc_type *protocol, *protocol = RC_TYPE_RC6_MCE; dev &= 0x7f; dprintk(1, "ir hauppauge (rc6-mce): t%d vendor=%d dev=%d code=%d\n", - toggle, vendor, dev, code); + *ptoggle, vendor, dev, code); } else { *ptoggle = 0; *protocol = RC_TYPE_RC6_6A_32; -- cgit From beae2c9eb500d5509feb9fd148d34d97a9b1d276 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:51 +0100 Subject: crypto: aesni: shut up -Wmaybe-uninitialized warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The rfc4106 encrypy/decrypt helper functions cause an annoying false-positive warning in allmodconfig if we turn on -Wmaybe-uninitialized warnings again: arch/x86/crypto/aesni-intel_glue.c: In function ‘helper_rfc4106_decrypt’: include/linux/scatterlist.h:67:31: warning: ‘dst_sg_walk.sg’ may be used uninitialized in this function [-Wmaybe-uninitialized] The problem seems to be that the compiler doesn't track the state of the 'one_entry_in_sg' variable across the kernel_fpu_begin/kernel_fpu_end section. This takes the easy way out by adding a bogus initialization, which should be harmless enough to get the patch into v4.9 so we can turn on this warning again by default without producing useless output. A follow-up patch for v4.10 rearranges the code to make the warning go away. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- arch/x86/crypto/aesni-intel_glue.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c index 0ab5ee1c26af..aa8b0672f87a 100644 --- a/arch/x86/crypto/aesni-intel_glue.c +++ b/arch/x86/crypto/aesni-intel_glue.c @@ -888,7 +888,7 @@ static int helper_rfc4106_encrypt(struct aead_request *req) unsigned long auth_tag_len = crypto_aead_authsize(tfm); u8 iv[16] __attribute__ ((__aligned__(AESNI_ALIGN))); struct scatter_walk src_sg_walk; - struct scatter_walk dst_sg_walk; + struct scatter_walk dst_sg_walk = {}; unsigned int i; /* Assuming we are supporting rfc4106 64-bit extended */ @@ -968,7 +968,7 @@ static int helper_rfc4106_decrypt(struct aead_request *req) u8 iv[16] __attribute__ ((__aligned__(AESNI_ALIGN))); u8 authTag[16]; struct scatter_walk src_sg_walk; - struct scatter_walk dst_sg_walk; + struct scatter_walk dst_sg_walk = {}; unsigned int i; if (unlikely(req->assoclen != 16 && req->assoclen != 20)) -- cgit From c50e90d0d2bc489901c9adb825609cbbb2f7ffa1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:52 +0100 Subject: infiniband: shut up a maybe-uninitialized warning Some configurations produce this harmless warning when built with gcc -Wmaybe-uninitialized: infiniband/core/cma.c: In function 'cma_get_net_dev': infiniband/core/cma.c:1242:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] I previously reported this for the powerpc64 defconfig, but have now reproduced the same thing for x86 as well, using gcc-5 or higher. The code looks correct to me, and this change just rearranges it by making sure we alway initialize the entire address structure to make the warning disappear. My first approach added an initialization at the time of the declaration, which Doug commented may be too costly, so I hope this version doesn't add overhead. Link: http://arm-soc.lixom.net/buildlogs/mainline/v4.7-rc6/buildall.powerpc.ppc64_defconfig.log.passed Link: https://patchwork.kernel.org/patch/9212825/ Acked-by: Haggai Eran Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- drivers/infiniband/core/cma.c | 54 ++++++++++++++++++++++--------------------- 1 file changed, 28 insertions(+), 26 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 36bf50ebb187..89a6b0546804 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1094,47 +1094,47 @@ static void cma_save_ib_info(struct sockaddr *src_addr, } } -static void cma_save_ip4_info(struct sockaddr *src_addr, - struct sockaddr *dst_addr, +static void cma_save_ip4_info(struct sockaddr_in *src_addr, + struct sockaddr_in *dst_addr, struct cma_hdr *hdr, __be16 local_port) { - struct sockaddr_in *ip4; - if (src_addr) { - ip4 = (struct sockaddr_in *)src_addr; - ip4->sin_family = AF_INET; - ip4->sin_addr.s_addr = hdr->dst_addr.ip4.addr; - ip4->sin_port = local_port; + *src_addr = (struct sockaddr_in) { + .sin_family = AF_INET, + .sin_addr.s_addr = hdr->dst_addr.ip4.addr, + .sin_port = local_port, + }; } if (dst_addr) { - ip4 = (struct sockaddr_in *)dst_addr; - ip4->sin_family = AF_INET; - ip4->sin_addr.s_addr = hdr->src_addr.ip4.addr; - ip4->sin_port = hdr->port; + *dst_addr = (struct sockaddr_in) { + .sin_family = AF_INET, + .sin_addr.s_addr = hdr->src_addr.ip4.addr, + .sin_port = hdr->port, + }; } } -static void cma_save_ip6_info(struct sockaddr *src_addr, - struct sockaddr *dst_addr, +static void cma_save_ip6_info(struct sockaddr_in6 *src_addr, + struct sockaddr_in6 *dst_addr, struct cma_hdr *hdr, __be16 local_port) { - struct sockaddr_in6 *ip6; - if (src_addr) { - ip6 = (struct sockaddr_in6 *)src_addr; - ip6->sin6_family = AF_INET6; - ip6->sin6_addr = hdr->dst_addr.ip6; - ip6->sin6_port = local_port; + *src_addr = (struct sockaddr_in6) { + .sin6_family = AF_INET6, + .sin6_addr = hdr->dst_addr.ip6, + .sin6_port = local_port, + }; } if (dst_addr) { - ip6 = (struct sockaddr_in6 *)dst_addr; - ip6->sin6_family = AF_INET6; - ip6->sin6_addr = hdr->src_addr.ip6; - ip6->sin6_port = hdr->port; + *dst_addr = (struct sockaddr_in6) { + .sin6_family = AF_INET6, + .sin6_addr = hdr->src_addr.ip6, + .sin6_port = hdr->port, + }; } } @@ -1159,10 +1159,12 @@ static int cma_save_ip_info(struct sockaddr *src_addr, switch (cma_get_ip_ver(hdr)) { case 4: - cma_save_ip4_info(src_addr, dst_addr, hdr, port); + cma_save_ip4_info((struct sockaddr_in *)src_addr, + (struct sockaddr_in *)dst_addr, hdr, port); break; case 6: - cma_save_ip6_info(src_addr, dst_addr, hdr, port); + cma_save_ip6_info((struct sockaddr_in6 *)src_addr, + (struct sockaddr_in6 *)dst_addr, hdr, port); break; default: return -EAFNOSUPPORT; -- cgit From 75ed26878b4cc0ca1c9d8ed5a642b45b60c231d9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:53 +0100 Subject: pcmcia: fix return value of soc_pcmcia_regulator_set The newly introduced soc_pcmcia_regulator_set() function sometimes returns without setting its return code, as shown by this warning: drivers/pcmcia/soc_common.c: In function 'soc_pcmcia_regulator_set': drivers/pcmcia/soc_common.c:112:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes it to propagate the regulator_disable() result instead. Fixes: ac61b6001a63 ("pcmcia: soc_common: add support for Vcc and Vpp regulators") Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- drivers/pcmcia/soc_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index 153f3122283d..b6b316de055c 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -107,7 +107,7 @@ int soc_pcmcia_regulator_set(struct soc_pcmcia_socket *skt, ret = regulator_enable(r->reg); } else { - regulator_disable(r->reg); + ret = regulator_disable(r->reg); } if (ret == 0) r->on = on; -- cgit From 4324cb23f4569edcf76e637cdb3c1dfe8e8a85e4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:54 +0100 Subject: Kbuild: enable -Wmaybe-uninitialized warnings by default Previously the warnings were added back at the W=1 level and above, this now turns them on again by default, assuming that we have addressed all warnings and again have a clean build for v4.10. I found a number of new warnings in linux-next already and submitted bugfixes for those. Hopefully they are caught by the 0day builder in the future as soon as this patch is merged. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- scripts/Makefile.extrawarn | 2 -- 1 file changed, 2 deletions(-) diff --git a/scripts/Makefile.extrawarn b/scripts/Makefile.extrawarn index 7fc2c5a3dbbe..7c321a603b07 100644 --- a/scripts/Makefile.extrawarn +++ b/scripts/Makefile.extrawarn @@ -60,8 +60,6 @@ endif KBUILD_CFLAGS += $(warning) else -KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized) - ifeq ($(cc-name),clang) KBUILD_CFLAGS += $(call cc-disable-warning, initializer-overrides) KBUILD_CFLAGS += $(call cc-disable-warning, unused-value) -- cgit From 409ae5a76e0505c8ffe1424f9c00dbf2ec7b5eea Mon Sep 17 00:00:00 2001 From: Matias Bjørling Date: Thu, 10 Nov 2016 12:26:57 +0100 Subject: lightnvm: invalid offset calculation for lba_shift MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ns->lba_shift assumes its value to be the logarithmic of the LA size. A previous patch duplicated the lba_shift calculation into lightnvm. It prematurely also subtracted a 512byte shift, which commonly is applied per-command. The 512byte shift being subtracted twice led to data loss when restoring the logical to physical mapping table from device and when issuing I/O commands using rrpc. Fix offset by removing the 512byte shift subtraction when calculating lba_shift. Fixes: b0b4e09c1ae7 "lightnvm: control life of nvm_dev in driver" Reported-by: Javier González Signed-off-by: Matias Bjørling Signed-off-by: Jens Axboe --- drivers/nvme/host/lightnvm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/lightnvm.c b/drivers/nvme/host/lightnvm.c index f5e3011e31fc..5daf2f4be0cd 100644 --- a/drivers/nvme/host/lightnvm.c +++ b/drivers/nvme/host/lightnvm.c @@ -612,7 +612,7 @@ int nvme_nvm_register(struct nvme_ns *ns, char *disk_name, int node, ret = nvm_register(dev); - ns->lba_shift = ilog2(dev->sec_size) - 9; + ns->lba_shift = ilog2(dev->sec_size); if (sysfs_create_group(&dev->dev.kobj, attrs)) pr_warn("%s: failed to create sysfs group for identification\n", -- cgit From 0cbc72a1781250f373327dd7e306e33859a42154 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 11 Nov 2016 18:28:50 -0700 Subject: aoe: fix crash in page count manipulation aoeblk contains some mysterious code, that wants to elevate the bio vec page counts while it's under IO. That is not needed, it's fragile, and it's causing kernel oopses for some. Reported-by: Tested-by: Don Koch Tested-by: Tested-by: Don Koch Signed-off-by: Jens Axboe --- drivers/block/aoe/aoecmd.c | 41 ----------------------------------------- 1 file changed, 41 deletions(-) diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index ab19adb07a12..3c606c09fd5a 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -853,45 +853,6 @@ rqbiocnt(struct request *r) return n; } -/* This can be removed if we are certain that no users of the block - * layer will ever use zero-count pages in bios. Otherwise we have to - * protect against the put_page sometimes done by the network layer. - * - * See http://oss.sgi.com/archives/xfs/2007-01/msg00594.html for - * discussion. - * - * We cannot use get_page in the workaround, because it insists on a - * positive page count as a precondition. So we use _refcount directly. - */ -static void -bio_pageinc(struct bio *bio) -{ - struct bio_vec bv; - struct page *page; - struct bvec_iter iter; - - bio_for_each_segment(bv, bio, iter) { - /* Non-zero page count for non-head members of - * compound pages is no longer allowed by the kernel. - */ - page = compound_head(bv.bv_page); - page_ref_inc(page); - } -} - -static void -bio_pagedec(struct bio *bio) -{ - struct page *page; - struct bio_vec bv; - struct bvec_iter iter; - - bio_for_each_segment(bv, bio, iter) { - page = compound_head(bv.bv_page); - page_ref_dec(page); - } -} - static void bufinit(struct buf *buf, struct request *rq, struct bio *bio) { @@ -899,7 +860,6 @@ bufinit(struct buf *buf, struct request *rq, struct bio *bio) buf->rq = rq; buf->bio = bio; buf->iter = bio->bi_iter; - bio_pageinc(bio); } static struct buf * @@ -1127,7 +1087,6 @@ aoe_end_buf(struct aoedev *d, struct buf *buf) if (buf == d->ip.buf) d->ip.buf = NULL; rq = buf->rq; - bio_pagedec(buf->bio); mempool_free(buf, d->bufpool); n = (unsigned long) rq->special; rq->special = (void *) --n; -- cgit From 4e3264d21b90984c2165e8fe5a7b64cf25bc2c2d Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Wed, 9 Nov 2016 15:36:33 -0800 Subject: bpf: Fix bpf_redirect to an ipip/ip6tnl dev If the bpf program calls bpf_redirect(dev, 0) and dev is an ipip/ip6tnl, it currently includes the mac header. e.g. If dev is ipip, the end result is IP-EthHdr-IP instead of IP-IP. The fix is to pull the mac header. At ingress, skb_postpull_rcsum() is not needed because the ethhdr should have been pulled once already and then got pushed back just before calling the bpf_prog. At egress, this patch calls skb_postpull_rcsum(). If bpf_redirect(dev, BPF_F_INGRESS) is called, it also fails now because it calls dev_forward_skb() which eventually calls eth_type_trans(skb, dev). The eth_type_trans() will set skb->type = PACKET_OTHERHOST because the mac address does not match the redirecting dev->dev_addr. The PACKET_OTHERHOST will eventually cause the ip_rcv() errors out. To fix this, ____dev_forward_skb() is added. Joint work with Daniel Borkmann. Fixes: cfc7381b3002 ("ip_tunnel: add collect_md mode to IPIP tunnel") Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Acked-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: Martin KaFai Lau Signed-off-by: David S. Miller --- include/linux/netdevice.h | 15 +++++++++++ net/core/dev.c | 17 +++++------- net/core/filter.c | 68 +++++++++++++++++++++++++++++++++++++++++------ 3 files changed, 81 insertions(+), 19 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 91ee3643ccc8..bf04a46f6d5b 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3354,6 +3354,21 @@ int dev_forward_skb(struct net_device *dev, struct sk_buff *skb); bool is_skb_forwardable(const struct net_device *dev, const struct sk_buff *skb); +static __always_inline int ____dev_forward_skb(struct net_device *dev, + struct sk_buff *skb) +{ + if (skb_orphan_frags(skb, GFP_ATOMIC) || + unlikely(!is_skb_forwardable(dev, skb))) { + atomic_long_inc(&dev->rx_dropped); + kfree_skb(skb); + return NET_RX_DROP; + } + + skb_scrub_packet(skb, true); + skb->priority = 0; + return 0; +} + void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev); extern int netdev_budget; diff --git a/net/core/dev.c b/net/core/dev.c index eaad4c28069f..6666b28b6815 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1766,19 +1766,14 @@ EXPORT_SYMBOL_GPL(is_skb_forwardable); int __dev_forward_skb(struct net_device *dev, struct sk_buff *skb) { - if (skb_orphan_frags(skb, GFP_ATOMIC) || - unlikely(!is_skb_forwardable(dev, skb))) { - atomic_long_inc(&dev->rx_dropped); - kfree_skb(skb); - return NET_RX_DROP; - } + int ret = ____dev_forward_skb(dev, skb); - skb_scrub_packet(skb, true); - skb->priority = 0; - skb->protocol = eth_type_trans(skb, dev); - skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN); + if (likely(!ret)) { + skb->protocol = eth_type_trans(skb, dev); + skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN); + } - return 0; + return ret; } EXPORT_SYMBOL_GPL(__dev_forward_skb); diff --git a/net/core/filter.c b/net/core/filter.c index 00351cdf7d0c..b391209838ef 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -1628,6 +1628,19 @@ static inline int __bpf_rx_skb(struct net_device *dev, struct sk_buff *skb) return dev_forward_skb(dev, skb); } +static inline int __bpf_rx_skb_no_mac(struct net_device *dev, + struct sk_buff *skb) +{ + int ret = ____dev_forward_skb(dev, skb); + + if (likely(!ret)) { + skb->dev = dev; + ret = netif_rx(skb); + } + + return ret; +} + static inline int __bpf_tx_skb(struct net_device *dev, struct sk_buff *skb) { int ret; @@ -1647,6 +1660,51 @@ static inline int __bpf_tx_skb(struct net_device *dev, struct sk_buff *skb) return ret; } +static int __bpf_redirect_no_mac(struct sk_buff *skb, struct net_device *dev, + u32 flags) +{ + /* skb->mac_len is not set on normal egress */ + unsigned int mlen = skb->network_header - skb->mac_header; + + __skb_pull(skb, mlen); + + /* At ingress, the mac header has already been pulled once. + * At egress, skb_pospull_rcsum has to be done in case that + * the skb is originated from ingress (i.e. a forwarded skb) + * to ensure that rcsum starts at net header. + */ + if (!skb_at_tc_ingress(skb)) + skb_postpull_rcsum(skb, skb_mac_header(skb), mlen); + skb_pop_mac_header(skb); + skb_reset_mac_len(skb); + return flags & BPF_F_INGRESS ? + __bpf_rx_skb_no_mac(dev, skb) : __bpf_tx_skb(dev, skb); +} + +static int __bpf_redirect_common(struct sk_buff *skb, struct net_device *dev, + u32 flags) +{ + bpf_push_mac_rcsum(skb); + return flags & BPF_F_INGRESS ? + __bpf_rx_skb(dev, skb) : __bpf_tx_skb(dev, skb); +} + +static int __bpf_redirect(struct sk_buff *skb, struct net_device *dev, + u32 flags) +{ + switch (dev->type) { + case ARPHRD_TUNNEL: + case ARPHRD_TUNNEL6: + case ARPHRD_SIT: + case ARPHRD_IPGRE: + case ARPHRD_VOID: + case ARPHRD_NONE: + return __bpf_redirect_no_mac(skb, dev, flags); + default: + return __bpf_redirect_common(skb, dev, flags); + } +} + BPF_CALL_3(bpf_clone_redirect, struct sk_buff *, skb, u32, ifindex, u64, flags) { struct net_device *dev; @@ -1675,10 +1733,7 @@ BPF_CALL_3(bpf_clone_redirect, struct sk_buff *, skb, u32, ifindex, u64, flags) return -ENOMEM; } - bpf_push_mac_rcsum(clone); - - return flags & BPF_F_INGRESS ? - __bpf_rx_skb(dev, clone) : __bpf_tx_skb(dev, clone); + return __bpf_redirect(clone, dev, flags); } static const struct bpf_func_proto bpf_clone_redirect_proto = { @@ -1722,10 +1777,7 @@ int skb_do_redirect(struct sk_buff *skb) return -EINVAL; } - bpf_push_mac_rcsum(skb); - - return ri->flags & BPF_F_INGRESS ? - __bpf_rx_skb(dev, skb) : __bpf_tx_skb(dev, skb); + return __bpf_redirect(skb, dev, ri->flags); } static const struct bpf_func_proto bpf_redirect_proto = { -- cgit From 90e02896f1a4627b14624245fbcbc19f8fd916cb Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Wed, 9 Nov 2016 15:36:34 -0800 Subject: bpf: Add test for bpf_redirect to ipip/ip6tnl The test creates two netns, ns1 and ns2. The host (the default netns) has an ipip or ip6tnl dev configured for tunneling traffic to the ns2. ping VIPS from ns1 <----> host <--tunnel--> ns2 (VIPs at loopback) The test is to have ns1 pinging VIPs configured at the loopback interface in ns2. The VIPs are 10.10.1.102 and 2401:face::66 (which are configured at lo@ns2). [Note: 0x66 => 102]. At ns1, the VIPs are routed _via_ the host. At the host, bpf programs are installed at the veth to redirect packets from a veth to the ipip/ip6tnl. The test is configured in a way so that both ingress and egress can be tested. At ns2, the ipip/ip6tnl dev is configured with the local and remote address specified. The return path is routed to the dev ipip/ip6tnl. During egress test, the host also locally tests pinging the VIPs to ensure that bpf_redirect at egress also works for the direct egress (i.e. not forwarding from dev ve1 to ve2). Acked-by: Alexei Starovoitov Signed-off-by: Martin KaFai Lau Signed-off-by: David S. Miller --- samples/bpf/Makefile | 4 + samples/bpf/tc_l2_redirect.sh | 173 ++++++++++++++++++++++++++++ samples/bpf/tc_l2_redirect_kern.c | 236 ++++++++++++++++++++++++++++++++++++++ samples/bpf/tc_l2_redirect_user.c | 73 ++++++++++++ 4 files changed, 486 insertions(+) create mode 100755 samples/bpf/tc_l2_redirect.sh create mode 100644 samples/bpf/tc_l2_redirect_kern.c create mode 100644 samples/bpf/tc_l2_redirect_user.c diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile index 12b7304d55dc..72c58675973e 100644 --- a/samples/bpf/Makefile +++ b/samples/bpf/Makefile @@ -27,6 +27,7 @@ hostprogs-y += xdp2 hostprogs-y += test_current_task_under_cgroup hostprogs-y += trace_event hostprogs-y += sampleip +hostprogs-y += tc_l2_redirect test_verifier-objs := test_verifier.o libbpf.o test_maps-objs := test_maps.o libbpf.o @@ -56,6 +57,7 @@ test_current_task_under_cgroup-objs := bpf_load.o libbpf.o \ test_current_task_under_cgroup_user.o trace_event-objs := bpf_load.o libbpf.o trace_event_user.o sampleip-objs := bpf_load.o libbpf.o sampleip_user.o +tc_l2_redirect-objs := bpf_load.o libbpf.o tc_l2_redirect_user.o # Tell kbuild to always build the programs always := $(hostprogs-y) @@ -72,6 +74,7 @@ always += test_probe_write_user_kern.o always += trace_output_kern.o always += tcbpf1_kern.o always += tcbpf2_kern.o +always += tc_l2_redirect_kern.o always += lathist_kern.o always += offwaketime_kern.o always += spintest_kern.o @@ -111,6 +114,7 @@ HOSTLOADLIBES_xdp2 += -lelf HOSTLOADLIBES_test_current_task_under_cgroup += -lelf HOSTLOADLIBES_trace_event += -lelf HOSTLOADLIBES_sampleip += -lelf +HOSTLOADLIBES_tc_l2_redirect += -l elf # Allows pointing LLC/CLANG to a LLVM backend with bpf support, redefine on cmdline: # make samples/bpf/ LLC=~/git/llvm/build/bin/llc CLANG=~/git/llvm/build/bin/clang diff --git a/samples/bpf/tc_l2_redirect.sh b/samples/bpf/tc_l2_redirect.sh new file mode 100755 index 000000000000..80a05591a140 --- /dev/null +++ b/samples/bpf/tc_l2_redirect.sh @@ -0,0 +1,173 @@ +#!/bin/bash + +[[ -z $TC ]] && TC='tc' +[[ -z $IP ]] && IP='ip' + +REDIRECT_USER='./tc_l2_redirect' +REDIRECT_BPF='./tc_l2_redirect_kern.o' + +RP_FILTER=$(< /proc/sys/net/ipv4/conf/all/rp_filter) +IPV6_FORWARDING=$(< /proc/sys/net/ipv6/conf/all/forwarding) + +function config_common { + local tun_type=$1 + + $IP netns add ns1 + $IP netns add ns2 + $IP link add ve1 type veth peer name vens1 + $IP link add ve2 type veth peer name vens2 + $IP link set dev ve1 up + $IP link set dev ve2 up + $IP link set dev ve1 mtu 1500 + $IP link set dev ve2 mtu 1500 + $IP link set dev vens1 netns ns1 + $IP link set dev vens2 netns ns2 + + $IP -n ns1 link set dev lo up + $IP -n ns1 link set dev vens1 up + $IP -n ns1 addr add 10.1.1.101/24 dev vens1 + $IP -n ns1 addr add 2401:db01::65/64 dev vens1 nodad + $IP -n ns1 route add default via 10.1.1.1 dev vens1 + $IP -n ns1 route add default via 2401:db01::1 dev vens1 + + $IP -n ns2 link set dev lo up + $IP -n ns2 link set dev vens2 up + $IP -n ns2 addr add 10.2.1.102/24 dev vens2 + $IP -n ns2 addr add 2401:db02::66/64 dev vens2 nodad + $IP -n ns2 addr add 10.10.1.102 dev lo + $IP -n ns2 addr add 2401:face::66/64 dev lo nodad + $IP -n ns2 link add ipt2 type ipip local 10.2.1.102 remote 10.2.1.1 + $IP -n ns2 link add ip6t2 type ip6tnl mode any local 2401:db02::66 remote 2401:db02::1 + $IP -n ns2 link set dev ipt2 up + $IP -n ns2 link set dev ip6t2 up + $IP netns exec ns2 $TC qdisc add dev vens2 clsact + $IP netns exec ns2 $TC filter add dev vens2 ingress bpf da obj $REDIRECT_BPF sec drop_non_tun_vip + if [[ $tun_type == "ipip" ]]; then + $IP -n ns2 route add 10.1.1.0/24 dev ipt2 + $IP netns exec ns2 sysctl -q -w net.ipv4.conf.all.rp_filter=0 + $IP netns exec ns2 sysctl -q -w net.ipv4.conf.ipt2.rp_filter=0 + else + $IP -n ns2 route add 10.1.1.0/24 dev ip6t2 + $IP -n ns2 route add 2401:db01::/64 dev ip6t2 + $IP netns exec ns2 sysctl -q -w net.ipv4.conf.all.rp_filter=0 + $IP netns exec ns2 sysctl -q -w net.ipv4.conf.ip6t2.rp_filter=0 + fi + + $IP addr add 10.1.1.1/24 dev ve1 + $IP addr add 2401:db01::1/64 dev ve1 nodad + $IP addr add 10.2.1.1/24 dev ve2 + $IP addr add 2401:db02::1/64 dev ve2 nodad + + $TC qdisc add dev ve2 clsact + $TC filter add dev ve2 ingress bpf da obj $REDIRECT_BPF sec l2_to_iptun_ingress_forward + + sysctl -q -w net.ipv4.conf.all.rp_filter=0 + sysctl -q -w net.ipv6.conf.all.forwarding=1 +} + +function cleanup { + set +e + [[ -z $DEBUG ]] || set +x + $IP netns delete ns1 >& /dev/null + $IP netns delete ns2 >& /dev/null + $IP link del ve1 >& /dev/null + $IP link del ve2 >& /dev/null + $IP link del ipt >& /dev/null + $IP link del ip6t >& /dev/null + sysctl -q -w net.ipv4.conf.all.rp_filter=$RP_FILTER + sysctl -q -w net.ipv6.conf.all.forwarding=$IPV6_FORWARDING + rm -f /sys/fs/bpf/tc/globals/tun_iface + [[ -z $DEBUG ]] || set -x + set -e +} + +function l2_to_ipip { + echo -n "l2_to_ipip $1: " + + local dir=$1 + + config_common ipip + + $IP link add ipt type ipip external + $IP link set dev ipt up + sysctl -q -w net.ipv4.conf.ipt.rp_filter=0 + sysctl -q -w net.ipv4.conf.ipt.forwarding=1 + + if [[ $dir == "egress" ]]; then + $IP route add 10.10.1.0/24 via 10.2.1.102 dev ve2 + $TC filter add dev ve2 egress bpf da obj $REDIRECT_BPF sec l2_to_iptun_ingress_redirect + sysctl -q -w net.ipv4.conf.ve1.forwarding=1 + else + $TC qdisc add dev ve1 clsact + $TC filter add dev ve1 ingress bpf da obj $REDIRECT_BPF sec l2_to_iptun_ingress_redirect + fi + + $REDIRECT_USER -U /sys/fs/bpf/tc/globals/tun_iface -i $(< /sys/class/net/ipt/ifindex) + + $IP netns exec ns1 ping -c1 10.10.1.102 >& /dev/null + + if [[ $dir == "egress" ]]; then + # test direct egress to ve2 (i.e. not forwarding from + # ve1 to ve2). + ping -c1 10.10.1.102 >& /dev/null + fi + + cleanup + + echo "OK" +} + +function l2_to_ip6tnl { + echo -n "l2_to_ip6tnl $1: " + + local dir=$1 + + config_common ip6tnl + + $IP link add ip6t type ip6tnl mode any external + $IP link set dev ip6t up + sysctl -q -w net.ipv4.conf.ip6t.rp_filter=0 + sysctl -q -w net.ipv4.conf.ip6t.forwarding=1 + + if [[ $dir == "egress" ]]; then + $IP route add 10.10.1.0/24 via 10.2.1.102 dev ve2 + $IP route add 2401:face::/64 via 2401:db02::66 dev ve2 + $TC filter add dev ve2 egress bpf da obj $REDIRECT_BPF sec l2_to_ip6tun_ingress_redirect + sysctl -q -w net.ipv4.conf.ve1.forwarding=1 + else + $TC qdisc add dev ve1 clsact + $TC filter add dev ve1 ingress bpf da obj $REDIRECT_BPF sec l2_to_ip6tun_ingress_redirect + fi + + $REDIRECT_USER -U /sys/fs/bpf/tc/globals/tun_iface -i $(< /sys/class/net/ip6t/ifindex) + + $IP netns exec ns1 ping -c1 10.10.1.102 >& /dev/null + $IP netns exec ns1 ping -6 -c1 2401:face::66 >& /dev/null + + if [[ $dir == "egress" ]]; then + # test direct egress to ve2 (i.e. not forwarding from + # ve1 to ve2). + ping -c1 10.10.1.102 >& /dev/null + ping -6 -c1 2401:face::66 >& /dev/null + fi + + cleanup + + echo "OK" +} + +cleanup +test_names="l2_to_ipip l2_to_ip6tnl" +test_dirs="ingress egress" +if [[ $# -ge 2 ]]; then + test_names=$1 + test_dirs=$2 +elif [[ $# -ge 1 ]]; then + test_names=$1 +fi + +for t in $test_names; do + for d in $test_dirs; do + $t $d + done +done diff --git a/samples/bpf/tc_l2_redirect_kern.c b/samples/bpf/tc_l2_redirect_kern.c new file mode 100644 index 000000000000..92a44729dbe4 --- /dev/null +++ b/samples/bpf/tc_l2_redirect_kern.c @@ -0,0 +1,236 @@ +/* Copyright (c) 2016 Facebook + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "bpf_helpers.h" + +#define _htonl __builtin_bswap32 + +#define PIN_GLOBAL_NS 2 +struct bpf_elf_map { + __u32 type; + __u32 size_key; + __u32 size_value; + __u32 max_elem; + __u32 flags; + __u32 id; + __u32 pinning; +}; + +/* copy of 'struct ethhdr' without __packed */ +struct eth_hdr { + unsigned char h_dest[ETH_ALEN]; + unsigned char h_source[ETH_ALEN]; + unsigned short h_proto; +}; + +struct bpf_elf_map SEC("maps") tun_iface = { + .type = BPF_MAP_TYPE_ARRAY, + .size_key = sizeof(int), + .size_value = sizeof(int), + .pinning = PIN_GLOBAL_NS, + .max_elem = 1, +}; + +static __always_inline bool is_vip_addr(__be16 eth_proto, __be32 daddr) +{ + if (eth_proto == htons(ETH_P_IP)) + return (_htonl(0xffffff00) & daddr) == _htonl(0x0a0a0100); + else if (eth_proto == htons(ETH_P_IPV6)) + return (daddr == _htonl(0x2401face)); + + return false; +} + +SEC("l2_to_iptun_ingress_forward") +int _l2_to_iptun_ingress_forward(struct __sk_buff *skb) +{ + struct bpf_tunnel_key tkey = {}; + void *data = (void *)(long)skb->data; + struct eth_hdr *eth = data; + void *data_end = (void *)(long)skb->data_end; + int key = 0, *ifindex; + + int ret; + + if (data + sizeof(*eth) > data_end) + return TC_ACT_OK; + + ifindex = bpf_map_lookup_elem(&tun_iface, &key); + if (!ifindex) + return TC_ACT_OK; + + if (eth->h_proto == htons(ETH_P_IP)) { + char fmt4[] = "ingress forward to ifindex:%d daddr4:%x\n"; + struct iphdr *iph = data + sizeof(*eth); + + if (data + sizeof(*eth) + sizeof(*iph) > data_end) + return TC_ACT_OK; + + if (iph->protocol != IPPROTO_IPIP) + return TC_ACT_OK; + + bpf_trace_printk(fmt4, sizeof(fmt4), *ifindex, + _htonl(iph->daddr)); + return bpf_redirect(*ifindex, BPF_F_INGRESS); + } else if (eth->h_proto == htons(ETH_P_IPV6)) { + char fmt6[] = "ingress forward to ifindex:%d daddr6:%x::%x\n"; + struct ipv6hdr *ip6h = data + sizeof(*eth); + + if (data + sizeof(*eth) + sizeof(*ip6h) > data_end) + return TC_ACT_OK; + + if (ip6h->nexthdr != IPPROTO_IPIP && + ip6h->nexthdr != IPPROTO_IPV6) + return TC_ACT_OK; + + bpf_trace_printk(fmt6, sizeof(fmt6), *ifindex, + _htonl(ip6h->daddr.s6_addr32[0]), + _htonl(ip6h->daddr.s6_addr32[3])); + return bpf_redirect(*ifindex, BPF_F_INGRESS); + } + + return TC_ACT_OK; +} + +SEC("l2_to_iptun_ingress_redirect") +int _l2_to_iptun_ingress_redirect(struct __sk_buff *skb) +{ + struct bpf_tunnel_key tkey = {}; + void *data = (void *)(long)skb->data; + struct eth_hdr *eth = data; + void *data_end = (void *)(long)skb->data_end; + int key = 0, *ifindex; + + int ret; + + if (data + sizeof(*eth) > data_end) + return TC_ACT_OK; + + ifindex = bpf_map_lookup_elem(&tun_iface, &key); + if (!ifindex) + return TC_ACT_OK; + + if (eth->h_proto == htons(ETH_P_IP)) { + char fmt4[] = "e/ingress redirect daddr4:%x to ifindex:%d\n"; + struct iphdr *iph = data + sizeof(*eth); + __be32 daddr = iph->daddr; + + if (data + sizeof(*eth) + sizeof(*iph) > data_end) + return TC_ACT_OK; + + if (!is_vip_addr(eth->h_proto, daddr)) + return TC_ACT_OK; + + bpf_trace_printk(fmt4, sizeof(fmt4), _htonl(daddr), *ifindex); + } else { + return TC_ACT_OK; + } + + tkey.tunnel_id = 10000; + tkey.tunnel_ttl = 64; + tkey.remote_ipv4 = 0x0a020166; /* 10.2.1.102 */ + bpf_skb_set_tunnel_key(skb, &tkey, sizeof(tkey), 0); + return bpf_redirect(*ifindex, 0); +} + +SEC("l2_to_ip6tun_ingress_redirect") +int _l2_to_ip6tun_ingress_redirect(struct __sk_buff *skb) +{ + struct bpf_tunnel_key tkey = {}; + void *data = (void *)(long)skb->data; + struct eth_hdr *eth = data; + void *data_end = (void *)(long)skb->data_end; + int key = 0, *ifindex; + + if (data + sizeof(*eth) > data_end) + return TC_ACT_OK; + + ifindex = bpf_map_lookup_elem(&tun_iface, &key); + if (!ifindex) + return TC_ACT_OK; + + if (eth->h_proto == htons(ETH_P_IP)) { + char fmt4[] = "e/ingress redirect daddr4:%x to ifindex:%d\n"; + struct iphdr *iph = data + sizeof(*eth); + + if (data + sizeof(*eth) + sizeof(*iph) > data_end) + return TC_ACT_OK; + + if (!is_vip_addr(eth->h_proto, iph->daddr)) + return TC_ACT_OK; + + bpf_trace_printk(fmt4, sizeof(fmt4), _htonl(iph->daddr), + *ifindex); + } else if (eth->h_proto == htons(ETH_P_IPV6)) { + char fmt6[] = "e/ingress redirect daddr6:%x to ifindex:%d\n"; + struct ipv6hdr *ip6h = data + sizeof(*eth); + + if (data + sizeof(*eth) + sizeof(*ip6h) > data_end) + return TC_ACT_OK; + + if (!is_vip_addr(eth->h_proto, ip6h->daddr.s6_addr32[0])) + return TC_ACT_OK; + + bpf_trace_printk(fmt6, sizeof(fmt6), + _htonl(ip6h->daddr.s6_addr32[0]), *ifindex); + } else { + return TC_ACT_OK; + } + + tkey.tunnel_id = 10000; + tkey.tunnel_ttl = 64; + /* 2401:db02:0:0:0:0:0:66 */ + tkey.remote_ipv6[0] = _htonl(0x2401db02); + tkey.remote_ipv6[1] = 0; + tkey.remote_ipv6[2] = 0; + tkey.remote_ipv6[3] = _htonl(0x00000066); + bpf_skb_set_tunnel_key(skb, &tkey, sizeof(tkey), BPF_F_TUNINFO_IPV6); + return bpf_redirect(*ifindex, 0); +} + +SEC("drop_non_tun_vip") +int _drop_non_tun_vip(struct __sk_buff *skb) +{ + struct bpf_tunnel_key tkey = {}; + void *data = (void *)(long)skb->data; + struct eth_hdr *eth = data; + void *data_end = (void *)(long)skb->data_end; + + if (data + sizeof(*eth) > data_end) + return TC_ACT_OK; + + if (eth->h_proto == htons(ETH_P_IP)) { + struct iphdr *iph = data + sizeof(*eth); + + if (data + sizeof(*eth) + sizeof(*iph) > data_end) + return TC_ACT_OK; + + if (is_vip_addr(eth->h_proto, iph->daddr)) + return TC_ACT_SHOT; + } else if (eth->h_proto == htons(ETH_P_IPV6)) { + struct ipv6hdr *ip6h = data + sizeof(*eth); + + if (data + sizeof(*eth) + sizeof(*ip6h) > data_end) + return TC_ACT_OK; + + if (is_vip_addr(eth->h_proto, ip6h->daddr.s6_addr32[0])) + return TC_ACT_SHOT; + } + + return TC_ACT_OK; +} + +char _license[] SEC("license") = "GPL"; diff --git a/samples/bpf/tc_l2_redirect_user.c b/samples/bpf/tc_l2_redirect_user.c new file mode 100644 index 000000000000..4013c5337b91 --- /dev/null +++ b/samples/bpf/tc_l2_redirect_user.c @@ -0,0 +1,73 @@ +/* Copyright (c) 2016 Facebook + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ +#include +#include + +#include +#include +#include +#include +#include + +#include "libbpf.h" + +static void usage(void) +{ + printf("Usage: tc_l2_ipip_redirect [...]\n"); + printf(" -U Update an already pinned BPF array\n"); + printf(" -i Interface index\n"); + printf(" -h Display this help\n"); +} + +int main(int argc, char **argv) +{ + const char *pinned_file = NULL; + int ifindex = -1; + int array_key = 0; + int array_fd = -1; + int ret = -1; + int opt; + + while ((opt = getopt(argc, argv, "F:U:i:")) != -1) { + switch (opt) { + /* General args */ + case 'U': + pinned_file = optarg; + break; + case 'i': + ifindex = atoi(optarg); + break; + default: + usage(); + goto out; + } + } + + if (ifindex < 0 || !pinned_file) { + usage(); + goto out; + } + + array_fd = bpf_obj_get(pinned_file); + if (array_fd < 0) { + fprintf(stderr, "bpf_obj_get(%s): %s(%d)\n", + pinned_file, strerror(errno), errno); + goto out; + } + + /* bpf_tunnel_key.remote_ipv4 expects host byte orders */ + ret = bpf_update_elem(array_fd, &array_key, &ifindex, 0); + if (ret) { + perror("bpf_update_elem"); + goto out; + } + +out: + if (array_fd != -1) + close(array_fd); + return ret; +} -- cgit From 34fad54c2537f7c99d07375e50cb30aa3c23bd83 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 9 Nov 2016 16:04:46 -0800 Subject: net: __skb_flow_dissect() must cap its return value After Tom patch, thoff field could point past the end of the buffer, this could fool some callers. If an skb was provided, skb->len should be the upper limit. If not, hlen is supposed to be the upper limit. Fixes: a6e544b0a88b ("flow_dissector: Jump to exit code in __skb_flow_dissect") Signed-off-by: Eric Dumazet Reported-by: Yibin Yang Acked-by: Willem de Bruijn Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- net/core/flow_dissector.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c index ab193e5def07..69e4463a4b1b 100644 --- a/net/core/flow_dissector.c +++ b/net/core/flow_dissector.c @@ -122,7 +122,7 @@ bool __skb_flow_dissect(const struct sk_buff *skb, struct flow_dissector_key_keyid *key_keyid; bool skip_vlan = false; u8 ip_proto = 0; - bool ret = false; + bool ret; if (!data) { data = skb->data; @@ -549,12 +549,17 @@ ip_proto_again: out_good: ret = true; -out_bad: + key_control->thoff = (u16)nhoff; +out: key_basic->n_proto = proto; key_basic->ip_proto = ip_proto; - key_control->thoff = (u16)nhoff; return ret; + +out_bad: + ret = false; + key_control->thoff = min_t(u16, nhoff, skb ? skb->len : hlen); + goto out; } EXPORT_SYMBOL(__skb_flow_dissect); -- cgit From 10b217681ddec4fa3ddb375bb188fec504523da4 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Thu, 10 Nov 2016 13:21:42 +0200 Subject: net: bpqether.h: remove if_ether.h guard __LINUX_IF_ETHER_H is not defined anywhere, and if_ether.h can keep itself from double inclusion, though it uses a single underscore prefix. Signed-off-by: Baruch Siach Signed-off-by: David S. Miller --- include/uapi/linux/bpqether.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/uapi/linux/bpqether.h b/include/uapi/linux/bpqether.h index a6c35e1a89ad..05865edaefda 100644 --- a/include/uapi/linux/bpqether.h +++ b/include/uapi/linux/bpqether.h @@ -5,9 +5,7 @@ * Defines for the BPQETHER pseudo device driver */ -#ifndef __LINUX_IF_ETHER_H #include -#endif #define SIOCSBPQETHOPT (SIOCDEVPRIVATE+0) /* reserved */ #define SIOCSBPQETHADDR (SIOCDEVPRIVATE+1) -- cgit From 02e56902e40e4c1ff57590c717e46377b72d5966 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 12 Nov 2016 21:04:23 +0000 Subject: x86/efi: Fix EFI memmap pointer size warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix this when building on 32-bit: arch/x86/platform/efi/efi.c: In function ‘__efi_enter_virtual_mode’: arch/x86/platform/efi/efi.c:911:5: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (efi_memory_desc_t *)pa); ^ arch/x86/platform/efi/efi.c:918:5: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (efi_memory_desc_t *)pa); ^ The @pa local variable is declared as phys_addr_t and that is a u64 when CONFIG_PHYS_ADDR_T_64BIT=y. (The last is enabled on 32-bit on a PAE build.) However, its value comes from __pa() which is basically doing pointer arithmetic and checking, and returns unsigned long as it is the native pointer width. So let's use an unsigned long too. It should be fine to do so because the later users cast it to a pointer too. Signed-off-by: Borislav Petkov Signed-off-by: Matt Fleming Cc: Andy Lutomirski Cc: Ard Biesheuvel Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20161112210424.5157-2-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar --- arch/x86/platform/efi/efi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index bf99aa7005eb..936a488d6cf6 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -861,7 +861,7 @@ static void __init __efi_enter_virtual_mode(void) int count = 0, pg_shift = 0; void *new_memmap = NULL; efi_status_t status; - phys_addr_t pa; + unsigned long pa; efi.systab = NULL; -- cgit From f6697df36bdf0bf7fce984605c2918d4a7b4269f Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sat, 12 Nov 2016 21:04:24 +0000 Subject: x86/efi: Prevent mixed mode boot corruption with CONFIG_VMAP_STACK=y Booting an EFI mixed mode kernel has been crashing since commit: e37e43a497d5 ("x86/mm/64: Enable vmapped stacks (CONFIG_HAVE_ARCH_VMAP_STACK=y)") The user-visible effect in my test setup was the kernel being unable to find the root file system ramdisk. This was likely caused by silent memory or page table corruption. Enabling CONFIG_DEBUG_VIRTUAL=y immediately flagged the thunking code as abusing virt_to_phys() because it was passing addresses that were not part of the kernel direct mapping. Use the slow version instead, which correctly handles all memory regions by performing a page table walk. Suggested-by: Andy Lutomirski Signed-off-by: Matt Fleming Cc: Andy Lutomirski Cc: Ard Biesheuvel Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20161112210424.5157-3-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar --- arch/x86/platform/efi/efi_64.c | 80 ++++++++++++++++++++++++++++++------------ 1 file changed, 57 insertions(+), 23 deletions(-) diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index 58b0f801f66f..319148bd4b05 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -211,6 +212,35 @@ void efi_sync_low_kernel_mappings(void) memcpy(pud_efi, pud_k, sizeof(pud_t) * num_entries); } +/* + * Wrapper for slow_virt_to_phys() that handles NULL addresses. + */ +static inline phys_addr_t +virt_to_phys_or_null_size(void *va, unsigned long size) +{ + bool bad_size; + + if (!va) + return 0; + + if (virt_addr_valid(va)) + return virt_to_phys(va); + + /* + * A fully aligned variable on the stack is guaranteed not to + * cross a page bounary. Try to catch strings on the stack by + * checking that 'size' is a power of two. + */ + bad_size = size > PAGE_SIZE || !is_power_of_2(size); + + WARN_ON(!IS_ALIGNED((unsigned long)va, size) || bad_size); + + return slow_virt_to_phys(va); +} + +#define virt_to_phys_or_null(addr) \ + virt_to_phys_or_null_size((addr), sizeof(*(addr))) + int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages) { unsigned long pfn, text; @@ -494,8 +524,8 @@ static efi_status_t efi_thunk_get_time(efi_time_t *tm, efi_time_cap_t *tc) spin_lock(&rtc_lock); - phys_tm = virt_to_phys(tm); - phys_tc = virt_to_phys(tc); + phys_tm = virt_to_phys_or_null(tm); + phys_tc = virt_to_phys_or_null(tc); status = efi_thunk(get_time, phys_tm, phys_tc); @@ -511,7 +541,7 @@ static efi_status_t efi_thunk_set_time(efi_time_t *tm) spin_lock(&rtc_lock); - phys_tm = virt_to_phys(tm); + phys_tm = virt_to_phys_or_null(tm); status = efi_thunk(set_time, phys_tm); @@ -529,9 +559,9 @@ efi_thunk_get_wakeup_time(efi_bool_t *enabled, efi_bool_t *pending, spin_lock(&rtc_lock); - phys_enabled = virt_to_phys(enabled); - phys_pending = virt_to_phys(pending); - phys_tm = virt_to_phys(tm); + phys_enabled = virt_to_phys_or_null(enabled); + phys_pending = virt_to_phys_or_null(pending); + phys_tm = virt_to_phys_or_null(tm); status = efi_thunk(get_wakeup_time, phys_enabled, phys_pending, phys_tm); @@ -549,7 +579,7 @@ efi_thunk_set_wakeup_time(efi_bool_t enabled, efi_time_t *tm) spin_lock(&rtc_lock); - phys_tm = virt_to_phys(tm); + phys_tm = virt_to_phys_or_null(tm); status = efi_thunk(set_wakeup_time, enabled, phys_tm); @@ -558,6 +588,10 @@ efi_thunk_set_wakeup_time(efi_bool_t enabled, efi_time_t *tm) return status; } +static unsigned long efi_name_size(efi_char16_t *name) +{ + return ucs2_strsize(name, EFI_VAR_NAME_LEN) + 1; +} static efi_status_t efi_thunk_get_variable(efi_char16_t *name, efi_guid_t *vendor, @@ -567,11 +601,11 @@ efi_thunk_get_variable(efi_char16_t *name, efi_guid_t *vendor, u32 phys_name, phys_vendor, phys_attr; u32 phys_data_size, phys_data; - phys_data_size = virt_to_phys(data_size); - phys_vendor = virt_to_phys(vendor); - phys_name = virt_to_phys(name); - phys_attr = virt_to_phys(attr); - phys_data = virt_to_phys(data); + phys_data_size = virt_to_phys_or_null(data_size); + phys_vendor = virt_to_phys_or_null(vendor); + phys_name = virt_to_phys_or_null_size(name, efi_name_size(name)); + phys_attr = virt_to_phys_or_null(attr); + phys_data = virt_to_phys_or_null_size(data, *data_size); status = efi_thunk(get_variable, phys_name, phys_vendor, phys_attr, phys_data_size, phys_data); @@ -586,9 +620,9 @@ efi_thunk_set_variable(efi_char16_t *name, efi_guid_t *vendor, u32 phys_name, phys_vendor, phys_data; efi_status_t status; - phys_name = virt_to_phys(name); - phys_vendor = virt_to_phys(vendor); - phys_data = virt_to_phys(data); + phys_name = virt_to_phys_or_null_size(name, efi_name_size(name)); + phys_vendor = virt_to_phys_or_null(vendor); + phys_data = virt_to_phys_or_null_size(data, data_size); /* If data_size is > sizeof(u32) we've got problems */ status = efi_thunk(set_variable, phys_name, phys_vendor, @@ -605,9 +639,9 @@ efi_thunk_get_next_variable(unsigned long *name_size, efi_status_t status; u32 phys_name_size, phys_name, phys_vendor; - phys_name_size = virt_to_phys(name_size); - phys_vendor = virt_to_phys(vendor); - phys_name = virt_to_phys(name); + phys_name_size = virt_to_phys_or_null(name_size); + phys_vendor = virt_to_phys_or_null(vendor); + phys_name = virt_to_phys_or_null_size(name, *name_size); status = efi_thunk(get_next_variable, phys_name_size, phys_name, phys_vendor); @@ -621,7 +655,7 @@ efi_thunk_get_next_high_mono_count(u32 *count) efi_status_t status; u32 phys_count; - phys_count = virt_to_phys(count); + phys_count = virt_to_phys_or_null(count); status = efi_thunk(get_next_high_mono_count, phys_count); return status; @@ -633,7 +667,7 @@ efi_thunk_reset_system(int reset_type, efi_status_t status, { u32 phys_data; - phys_data = virt_to_phys(data); + phys_data = virt_to_phys_or_null_size(data, data_size); efi_thunk(reset_system, reset_type, status, data_size, phys_data); } @@ -661,9 +695,9 @@ efi_thunk_query_variable_info(u32 attr, u64 *storage_space, if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION) return EFI_UNSUPPORTED; - phys_storage = virt_to_phys(storage_space); - phys_remaining = virt_to_phys(remaining_space); - phys_max = virt_to_phys(max_variable_size); + phys_storage = virt_to_phys_or_null(storage_space); + phys_remaining = virt_to_phys_or_null(remaining_space); + phys_max = virt_to_phys_or_null(max_variable_size); status = efi_thunk(query_variable_info, attr, phys_storage, phys_remaining, phys_max); -- cgit From d70674eeaa5efdefb99928691161578ae0a80316 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 25 Oct 2016 17:55:04 +0200 Subject: iio: maxim_thermocouple: detect invalid storage size in read() As found by gcc -Wmaybe-uninitialized, having a storage_bytes value other than 2 or 4 will result in undefined behavior: drivers/iio/temperature/maxim_thermocouple.c: In function 'maxim_thermocouple_read': drivers/iio/temperature/maxim_thermocouple.c:141:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This probably cannot happen, but returning -EINVAL here is appropriate and makes gcc happy and the code more robust. Fixes: 231147ee77f3 ("iio: maxim_thermocouple: Align 16 bit big endian value of raw reads") Signed-off-by: Arnd Bergmann Signed-off-by: Jonathan Cameron (cherry picked from commit 32cb7d27e65df9daa7cee8f1fdf7b259f214bee2) Signed-off-by: Greg Kroah-Hartman --- drivers/iio/temperature/maxim_thermocouple.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c index 066161a4bccd..f962f31a5eb2 100644 --- a/drivers/iio/temperature/maxim_thermocouple.c +++ b/drivers/iio/temperature/maxim_thermocouple.c @@ -136,6 +136,8 @@ static int maxim_thermocouple_read(struct maxim_thermocouple_data *data, ret = spi_read(data->spi, (void *)&buf32, storage_bytes); *val = be32_to_cpu(buf32); break; + default: + ret = -EINVAL; } if (ret) -- cgit From ca0a75316dc62af92943761b1cc049e15c92eb09 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 9 Nov 2016 19:51:25 -0800 Subject: r8152: Fix error path in open function If usb_submit_urb() called from the open function fails, the following crash may be observed. r8152 8-1:1.0 eth0: intr_urb submit failed: -19 ... r8152 8-1:1.0 eth0: v1.08.3 Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b7b pgd = ffffffc0e7305000 [6b6b6b6b6b6b6b7b] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP ... PC is at notifier_chain_register+0x2c/0x58 LR is at blocking_notifier_chain_register+0x54/0x70 ... Call trace: [] notifier_chain_register+0x2c/0x58 [] blocking_notifier_chain_register+0x54/0x70 [] register_pm_notifier+0x24/0x2c [] rtl8152_open+0x3dc/0x3f8 [r8152] [] __dev_open+0xac/0x104 [] __dev_change_flags+0xb0/0x148 [] dev_change_flags+0x34/0x70 [] do_setlink+0x2c8/0x888 [] rtnl_newlink+0x328/0x644 [] rtnetlink_rcv_msg+0x1a8/0x1d4 [] netlink_rcv_skb+0x68/0xd0 [] rtnetlink_rcv+0x2c/0x3c [] netlink_unicast+0x16c/0x234 [] netlink_sendmsg+0x340/0x364 [] sock_sendmsg+0x48/0x60 [] SyS_sendto+0xe0/0x120 [] SyS_send+0x40/0x4c [] el0_svc_naked+0x24/0x28 Clean up error handling to avoid registering the notifier if the open function is going to fail. Signed-off-by: Guenter Roeck Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 75c516889645..efb84f092492 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3266,10 +3266,8 @@ static int rtl8152_open(struct net_device *netdev) goto out; res = usb_autopm_get_interface(tp->intf); - if (res < 0) { - free_all_mem(tp); - goto out; - } + if (res < 0) + goto out_free; mutex_lock(&tp->control); @@ -3285,10 +3283,9 @@ static int rtl8152_open(struct net_device *netdev) netif_device_detach(tp->netdev); netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n", res); - free_all_mem(tp); - } else { - napi_enable(&tp->napi); + goto out_unlock; } + napi_enable(&tp->napi); mutex_unlock(&tp->control); @@ -3297,7 +3294,13 @@ static int rtl8152_open(struct net_device *netdev) tp->pm_notifier.notifier_call = rtl_notifier; register_pm_notifier(&tp->pm_notifier); #endif + return 0; +out_unlock: + mutex_unlock(&tp->control); + usb_autopm_put_interface(tp->intf); +out_free: + free_all_mem(tp); out: return res; } -- cgit From 969447f226b451c453ddc83cac6144eaeac6f2e3 Mon Sep 17 00:00:00 2001 From: Stephen Suryaputra Lin Date: Thu, 10 Nov 2016 11:16:15 -0500 Subject: ipv4: use new_gw for redirect neigh lookup In v2.6, ip_rt_redirect() calls arp_bind_neighbour() which returns 0 and then the state of the neigh for the new_gw is checked. If the state isn't valid then the redirected route is deleted. This behavior is maintained up to v3.5.7 by check_peer_redirect() because rt->rt_gateway is assigned to peer->redirect_learned.a4 before calling ipv4_neigh_lookup(). After commit 5943634fc559 ("ipv4: Maintain redirect and PMTU info in struct rtable again."), ipv4_neigh_lookup() is performed without the rt_gateway assigned to the new_gw. In the case when rt_gateway (old_gw) isn't zero, the function uses it as the key. The neigh is most likely valid since the old_gw is the one that sends the ICMP redirect message. Then the new_gw is assigned to fib_nh_exception. The problem is: the new_gw ARP may never gets resolved and the traffic is blackholed. So, use the new_gw for neigh lookup. Changes from v1: - use __ipv4_neigh_lookup instead (per Eric Dumazet). Fixes: 5943634fc559 ("ipv4: Maintain redirect and PMTU info in struct rtable again.") Signed-off-by: Stephen Suryaputra Lin Signed-off-by: David S. Miller --- net/ipv4/route.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 62d4d90c1389..2a57566e6e91 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -753,7 +753,9 @@ static void __ip_do_redirect(struct rtable *rt, struct sk_buff *skb, struct flow goto reject_redirect; } - n = ipv4_neigh_lookup(&rt->dst, NULL, &new_gw); + n = __ipv4_neigh_lookup(rt->dst.dev, new_gw); + if (!n) + n = neigh_create(&arp_tbl, &new_gw, rt->dst.dev); if (!IS_ERR(n)) { if (!(n->nud_state & NUD_VALID)) { neigh_event_send(n, NULL); -- cgit From ac6e780070e30e4c35bd395acfe9191e6268bdd3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 10 Nov 2016 13:12:35 -0800 Subject: tcp: take care of truncations done by sk_filter() With syzkaller help, Marco Grassi found a bug in TCP stack, crashing in tcp_collapse() Root cause is that sk_filter() can truncate the incoming skb, but TCP stack was not really expecting this to happen. It probably was expecting a simple DROP or ACCEPT behavior. We first need to make sure no part of TCP header could be removed. Then we need to adjust TCP_SKB_CB(skb)->end_seq Many thanks to syzkaller team and Marco for giving us a reproducer. Signed-off-by: Eric Dumazet Reported-by: Marco Grassi Reported-by: Vladis Dronov Signed-off-by: David S. Miller --- include/net/tcp.h | 1 + net/ipv4/tcp_ipv4.c | 19 ++++++++++++++++++- net/ipv6/tcp_ipv6.c | 6 ++++-- 3 files changed, 23 insertions(+), 3 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index 304a8e17bc87..123979fe12bf 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -1220,6 +1220,7 @@ static inline void tcp_prequeue_init(struct tcp_sock *tp) bool tcp_prequeue(struct sock *sk, struct sk_buff *skb); bool tcp_add_backlog(struct sock *sk, struct sk_buff *skb); +int tcp_filter(struct sock *sk, struct sk_buff *skb); #undef STATE_TRACE diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 61b7be303eec..2259114c7242 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1564,6 +1564,21 @@ bool tcp_add_backlog(struct sock *sk, struct sk_buff *skb) } EXPORT_SYMBOL(tcp_add_backlog); +int tcp_filter(struct sock *sk, struct sk_buff *skb) +{ + struct tcphdr *th = (struct tcphdr *)skb->data; + unsigned int eaten = skb->len; + int err; + + err = sk_filter_trim_cap(sk, skb, th->doff * 4); + if (!err) { + eaten -= skb->len; + TCP_SKB_CB(skb)->end_seq -= eaten; + } + return err; +} +EXPORT_SYMBOL(tcp_filter); + /* * From tcp_input.c */ @@ -1676,8 +1691,10 @@ process: nf_reset(skb); - if (sk_filter(sk, skb)) + if (tcp_filter(sk, skb)) goto discard_and_relse; + th = (const struct tcphdr *)skb->data; + iph = ip_hdr(skb); skb->dev = NULL; diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 6ca23c2e76f7..b9f1fee9a886 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1229,7 +1229,7 @@ static int tcp_v6_do_rcv(struct sock *sk, struct sk_buff *skb) if (skb->protocol == htons(ETH_P_IP)) return tcp_v4_do_rcv(sk, skb); - if (sk_filter(sk, skb)) + if (tcp_filter(sk, skb)) goto discard; /* @@ -1457,8 +1457,10 @@ process: if (tcp_v6_inbound_md5_hash(sk, skb)) goto discard_and_relse; - if (sk_filter(sk, skb)) + if (tcp_filter(sk, skb)) goto discard_and_relse; + th = (const struct tcphdr *)skb->data; + hdr = ipv6_hdr(skb); skb->dev = NULL; -- cgit From 7b5b74efcca00f15c2aec1dc7175bfe34b6ec643 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 10 Nov 2016 19:08:39 -0500 Subject: Revert "include/uapi/linux/atm_zatm.h: include linux/time.h" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit cf00713a655d ("include/uapi/linux/atm_zatm.h: include linux/time.h"). This attempted to fix userspace breakage that no longer existed when the patch was merged. Almost one year earlier, commit 70ba07b675b5 ("atm: remove 'struct zatm_t_hist'") deleted the struct in question. After this patch was merged, we now have to deal with people being unable to include this header in conjunction with standard C library headers like stdlib.h (which linux-atm does). Example breakage: x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I./../q2931 -I./../saal \ -I. -DCPPFLAGS_TEST -I../../src/include -O2 -march=native -pipe -g \ -frecord-gcc-switches -freport-bug -Wimplicit-function-declaration \ -Wnonnull -Wstrict-aliasing -Wparentheses -Warray-bounds \ -Wfree-nonheap-object -Wreturn-local-addr -fno-strict-aliasing -Wall \ -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c zntune.c In file included from /usr/include/linux/atm_zatm.h:17:0, from zntune.c:17: /usr/include/linux/time.h:9:8: error: redefinition of ‘struct timespec’ struct timespec { ^ In file included from /usr/include/sys/select.h:43:0, from /usr/include/sys/types.h:219, from /usr/include/stdlib.h:314, from zntune.c:9: /usr/include/time.h:120:8: note: originally defined here struct timespec ^ Signed-off-by: Mike Frysinger Acked-by: Mikko Rapeli Signed-off-by: David S. Miller --- include/uapi/linux/atm_zatm.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/uapi/linux/atm_zatm.h b/include/uapi/linux/atm_zatm.h index 5cd4d4d2dd1d..9c9c6ad55f14 100644 --- a/include/uapi/linux/atm_zatm.h +++ b/include/uapi/linux/atm_zatm.h @@ -14,7 +14,6 @@ #include #include -#include #define ZATM_GETPOOL _IOW('a',ATMIOC_SARPRV+1,struct atmif_sioc) /* get pool statistics */ -- cgit From 3ffb6a39b751b635a0c50b650064c38b8d371ef2 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 11 Nov 2016 00:11:42 -0500 Subject: bnxt_en: Fix ring arithmetic in bnxt_setup_tc(). The logic is missing the check on whether the tx and rx rings are sharing completion rings or not. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index a9f9f3738022..c6909660e097 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -6309,6 +6309,7 @@ static int bnxt_setup_tc(struct net_device *dev, u32 handle, __be16 proto, struct tc_to_netdev *ntc) { struct bnxt *bp = netdev_priv(dev); + bool sh = false; u8 tc; if (ntc->type != TC_SETUP_MQPRIO) @@ -6325,12 +6326,11 @@ static int bnxt_setup_tc(struct net_device *dev, u32 handle, __be16 proto, if (netdev_get_num_tc(dev) == tc) return 0; + if (bp->flags & BNXT_FLAG_SHARED_RINGS) + sh = true; + if (tc) { int max_rx_rings, max_tx_rings, rc; - bool sh = false; - - if (bp->flags & BNXT_FLAG_SHARED_RINGS) - sh = true; rc = bnxt_get_max_rings(bp, &max_rx_rings, &max_tx_rings, sh); if (rc || bp->tx_nr_rings_per_tc * tc > max_tx_rings) @@ -6348,7 +6348,8 @@ static int bnxt_setup_tc(struct net_device *dev, u32 handle, __be16 proto, bp->tx_nr_rings = bp->tx_nr_rings_per_tc; netdev_reset_tc(dev); } - bp->cp_nr_rings = max_t(int, bp->tx_nr_rings, bp->rx_nr_rings); + bp->cp_nr_rings = sh ? max_t(int, bp->tx_nr_rings, bp->rx_nr_rings) : + bp->tx_nr_rings + bp->rx_nr_rings; bp->num_stat_ctxs = bp->cp_nr_rings; if (netif_running(bp->dev)) -- cgit From 73b9bad63ae3c902ce64221d10a0d371d059748d Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 11 Nov 2016 00:11:43 -0500 Subject: bnxt_en: Fix VF virtual link state. If the physical link is down and the VF virtual link is set to "enable", the current code does not always work. If the link is down but the cable is attached, the firmware returns LINK_SIGNAL instead of NO_LINK. The current code is treating LINK_SIGNAL as link up. The fix is to treat link as down when the link_status != LINK. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c index ec6cd18842c3..60e2af8678bd 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c @@ -774,8 +774,8 @@ static int bnxt_vf_set_link(struct bnxt *bp, struct bnxt_vf_info *vf) if (vf->flags & BNXT_VF_LINK_UP) { /* if physical link is down, force link up on VF */ - if (phy_qcfg_resp.link == - PORT_PHY_QCFG_RESP_LINK_NO_LINK) { + if (phy_qcfg_resp.link != + PORT_PHY_QCFG_RESP_LINK_LINK) { phy_qcfg_resp.link = PORT_PHY_QCFG_RESP_LINK_LINK; phy_qcfg_resp.link_speed = cpu_to_le16( -- cgit From 2d644d4c7506646f9c4a2afceb7fd5f030bc0c9f Mon Sep 17 00:00:00 2001 From: Yotam Gigi Date: Fri, 11 Nov 2016 16:34:25 +0100 Subject: mlxsw: spectrum: Fix refcount bug on span entries When binding port to a newly created span entry, its refcount is initialized to zero even though it has a bound port. That leads to unexpected behaviour when the user tries to delete that port from the span entry. Fix this by initializing the reference count to 1. Also add a warning to put function. Fixes: 763b4b70afcd ("mlxsw: spectrum: Add support in matchall mirror TC offloading") Signed-off-by: Yotam Gigi Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 1ec0a4ce3c46..dda5761e91bc 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -231,7 +231,7 @@ mlxsw_sp_span_entry_create(struct mlxsw_sp_port *port) span_entry->used = true; span_entry->id = index; - span_entry->ref_count = 0; + span_entry->ref_count = 1; span_entry->local_port = local_port; return span_entry; } @@ -270,6 +270,7 @@ static struct mlxsw_sp_span_entry span_entry = mlxsw_sp_span_entry_find(port); if (span_entry) { + /* Already exists, just take a reference */ span_entry->ref_count++; return span_entry; } @@ -280,6 +281,7 @@ static struct mlxsw_sp_span_entry static int mlxsw_sp_span_entry_put(struct mlxsw_sp *mlxsw_sp, struct mlxsw_sp_span_entry *span_entry) { + WARN_ON(!span_entry->ref_count); if (--span_entry->ref_count == 0) mlxsw_sp_span_entry_destroy(mlxsw_sp, span_entry); return 0; -- cgit From 42cdb338f40a98e6558bae35456fe86b6e90e1ef Mon Sep 17 00:00:00 2001 From: Arkadi Sharshevsky Date: Fri, 11 Nov 2016 16:34:26 +0100 Subject: mlxsw: spectrum_router: Correctly dump neighbour activity The device's neighbour table is periodically dumped in order to update the kernel about active neighbours. A single dump session may span multiple queries, until the response carries less records than requested or when a record (can contain up to four neighbour entries) is not full. Current code stops the session when the number of returned records is zero, which can result in infinite loop in case of high packet rate. Fix this by stopping the session according to the above logic. Fixes: c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table") Signed-off-by: Arkadi Sharshevsky Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlxsw/spectrum_router.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 040737e14a3f..cbeeddd70c5a 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -800,6 +800,26 @@ static void mlxsw_sp_router_neigh_rec_process(struct mlxsw_sp *mlxsw_sp, } } +static bool mlxsw_sp_router_rauhtd_is_full(char *rauhtd_pl) +{ + u8 num_rec, last_rec_index, num_entries; + + num_rec = mlxsw_reg_rauhtd_num_rec_get(rauhtd_pl); + last_rec_index = num_rec - 1; + + if (num_rec < MLXSW_REG_RAUHTD_REC_MAX_NUM) + return false; + if (mlxsw_reg_rauhtd_rec_type_get(rauhtd_pl, last_rec_index) == + MLXSW_REG_RAUHTD_TYPE_IPV6) + return true; + + num_entries = mlxsw_reg_rauhtd_ipv4_rec_num_entries_get(rauhtd_pl, + last_rec_index); + if (++num_entries == MLXSW_REG_RAUHTD_IPV4_ENT_PER_REC) + return true; + return false; +} + static int mlxsw_sp_router_neighs_update_rauhtd(struct mlxsw_sp *mlxsw_sp) { char *rauhtd_pl; @@ -826,7 +846,7 @@ static int mlxsw_sp_router_neighs_update_rauhtd(struct mlxsw_sp *mlxsw_sp) for (i = 0; i < num_rec; i++) mlxsw_sp_router_neigh_rec_process(mlxsw_sp, rauhtd_pl, i); - } while (num_rec); + } while (mlxsw_sp_router_rauhtd_is_full(rauhtd_pl)); rtnl_unlock(); kfree(rauhtd_pl); -- cgit From 7724325a19fb0a51d2a69bd2915b33f0ff197f5a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 12 Nov 2016 12:46:26 -0200 Subject: dvb-usb: move data_mutex to struct dvb_usb_device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The data_mutex is initialized too late, as it is needed for each device driver's power control, causing an OOPS: dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] __mutex_lock_slowpath+0x6f/0x100 PGD 0 Oops: 0002 [#1] SMP Modules linked in: dvb_usb_cinergyT2(+) dvb_usb CPU: 0 PID: 2029 Comm: modprobe Not tainted 4.9.0-rc4-dvbmod #24 Hardware name: FUJITSU LIFEBOOK A544/FJNBB35 , BIOS Version 1.17 05/09/2014 task: ffff88020e943840 task.stack: ffff8801f36ec000 RIP: 0010:[] [] __mutex_lock_slowpath+0x6f/0x100 RSP: 0018:ffff8801f36efb10 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88021509bdc8 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88021509bdcc RBP: ffff8801f36efb58 R08: ffff88021f216320 R09: 0000000000100000 R10: ffff88021f216320 R11: 00000023fee6c5a1 R12: ffff88020e943840 R13: ffff88021509bdcc R14: 00000000ffffffff R15: ffff88021509bdd0 FS: 00007f21adb86740(0000) GS:ffff88021f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000215bce000 CR4: 00000000001406f0 Call Trace: mutex_lock+0x16/0x25 cinergyt2_power_ctrl+0x1f/0x60 [dvb_usb_cinergyT2] dvb_usb_device_init+0x21e/0x5d0 [dvb_usb] cinergyt2_usb_probe+0x21/0x50 [dvb_usb_cinergyT2] usb_probe_interface+0xf3/0x2a0 driver_probe_device+0x208/0x2b0 __driver_attach+0x87/0x90 driver_probe_device+0x2b0/0x2b0 bus_for_each_dev+0x52/0x80 bus_add_driver+0x1a3/0x220 driver_register+0x56/0xd0 usb_register_driver+0x77/0x130 do_one_initcall+0x46/0x180 free_vmap_area_noflush+0x38/0x70 kmem_cache_alloc+0x84/0xc0 do_init_module+0x50/0x1be load_module+0x1d8b/0x2100 find_symbol_in_section+0xa0/0xa0 SyS_finit_module+0x89/0x90 entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 a7 1d 00 00 8b 03 83 f8 01 0f 84 97 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 4c 89 3c 24 41 be ff ff ff ff 48 89 44 24 08 <48> 89 20 4c 89 64 24 10 eb 1a 49 c7 44 24 08 02 00 00 00 c6 43 RIP [] __mutex_lock_slowpath+0x6f/0x100 RSP CR2: 0000000000000000 So, move it to the struct dvb_usb_device and initialize it before calling the driver's callbacks. Reported-by: Jörg Otte Tested-by: Jörg Otte Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Linus Torvalds --- drivers/media/usb/dvb-usb/af9005.c | 33 ++++++++---------------- drivers/media/usb/dvb-usb/cinergyT2-core.c | 33 ++++++++---------------- drivers/media/usb/dvb-usb/cxusb.c | 39 ++++++++++++----------------- drivers/media/usb/dvb-usb/cxusb.h | 1 - drivers/media/usb/dvb-usb/dtt200u.c | 40 +++++++++++++----------------- drivers/media/usb/dvb-usb/dvb-usb-init.c | 1 + drivers/media/usb/dvb-usb/dvb-usb.h | 9 +++++-- 7 files changed, 61 insertions(+), 95 deletions(-) diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c index b257780fb380..7853261906b1 100644 --- a/drivers/media/usb/dvb-usb/af9005.c +++ b/drivers/media/usb/dvb-usb/af9005.c @@ -53,7 +53,6 @@ struct af9005_device_state { u8 sequence; int led_state; unsigned char data[256]; - struct mutex data_mutex; }; static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, @@ -72,7 +71,7 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, return -EINVAL; } - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = 14; /* rest of buffer length low */ st->data[1] = 0; /* rest of buffer length high */ @@ -140,7 +139,7 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, values[i] = st->data[8 + i]; ret: - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -481,7 +480,7 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, } packet_len = wlen + 5; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = (u8) (packet_len & 0xff); st->data[1] = (u8) ((packet_len & 0xff00) >> 8); @@ -512,7 +511,7 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, rbuf[i] = st->data[i + 7]; } - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -523,7 +522,7 @@ int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values, u8 seq; int ret, i; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); memset(st->data, 0, sizeof(st->data)); @@ -559,7 +558,7 @@ int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values, for (i = 0; i < len; i++) values[i] = st->data[6 + i]; } - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -847,7 +846,7 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) return 0; } - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); /* deb_info("rc_query\n"); */ st->data[0] = 3; /* rest of packet length low */ @@ -890,7 +889,7 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) } ret: - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -1004,20 +1003,8 @@ static struct dvb_usb_device_properties af9005_properties; static int af9005_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct dvb_usb_device *d; - struct af9005_device_state *st; - int ret; - - ret = dvb_usb_device_init(intf, &af9005_properties, - THIS_MODULE, &d, adapter_nr); - - if (ret < 0) - return ret; - - st = d->priv; - mutex_init(&st->data_mutex); - - return 0; + return dvb_usb_device_init(intf, &af9005_properties, + THIS_MODULE, NULL, adapter_nr); } enum af9005_usb_table_entry { diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c index 8ac825413d5a..290275bc7fde 100644 --- a/drivers/media/usb/dvb-usb/cinergyT2-core.c +++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c @@ -42,7 +42,6 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); struct cinergyt2_state { u8 rc_counter; unsigned char data[64]; - struct mutex data_mutex; }; /* We are missing a release hook with usb_device data */ @@ -56,12 +55,12 @@ static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable) struct cinergyt2_state *st = d->priv; int ret; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = CINERGYT2_EP1_CONTROL_STREAM_TRANSFER; st->data[1] = enable ? 1 : 0; ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 64, 0); - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -71,12 +70,12 @@ static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable) struct cinergyt2_state *st = d->priv; int ret; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = CINERGYT2_EP1_SLEEP_MODE; st->data[1] = enable ? 0 : 1; ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 3, 0); - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -89,7 +88,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev); - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = CINERGYT2_EP1_GET_FIRMWARE_VERSION; ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0); @@ -97,7 +96,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep " "state info\n"); } - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); /* Copy this pointer as we are gonna need it in the release phase */ cinergyt2_usb_device = adap->dev; @@ -166,7 +165,7 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) *state = REMOTE_NO_KEY_PRESSED; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS; ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); @@ -202,29 +201,17 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) } ret: - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } static int cinergyt2_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct dvb_usb_device *d; - struct cinergyt2_state *st; - int ret; - - ret = dvb_usb_device_init(intf, &cinergyt2_properties, - THIS_MODULE, &d, adapter_nr); - if (ret < 0) - return ret; - - st = d->priv; - mutex_init(&st->data_mutex); - - return 0; + return dvb_usb_device_init(intf, &cinergyt2_properties, + THIS_MODULE, NULL, adapter_nr); } - static struct usb_device_id cinergyt2_usb_table[] = { { USB_DEVICE(USB_VID_TERRATEC, 0x0038) }, { 0 } diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index 39772812269d..243403081fa5 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -68,7 +68,7 @@ static int cxusb_ctrl_msg(struct dvb_usb_device *d, wo = (rbuf == NULL || rlen == 0); /* write-only */ - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = cmd; memcpy(&st->data[1], wbuf, wlen); if (wo) @@ -77,7 +77,7 @@ static int cxusb_ctrl_msg(struct dvb_usb_device *d, ret = dvb_usb_generic_rw(d, st->data, 1 + wlen, rbuf, rlen, 0); - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -1461,43 +1461,36 @@ static struct dvb_usb_device_properties cxusb_mygica_t230_properties; static int cxusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct dvb_usb_device *d; - struct cxusb_state *st; - if (0 == dvb_usb_device_init(intf, &cxusb_medion_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgh064f_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dee1601_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgz201_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dtt7579_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_needsfirmware_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_rev2_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_mygica_t230_properties, - THIS_MODULE, &d, adapter_nr) || - 0) { - st = d->priv; - mutex_init(&st->data_mutex); - + THIS_MODULE, NULL, adapter_nr) || + 0) return 0; - } return -EINVAL; } diff --git a/drivers/media/usb/dvb-usb/cxusb.h b/drivers/media/usb/dvb-usb/cxusb.h index 9f3ee0e47d5c..18acda19527a 100644 --- a/drivers/media/usb/dvb-usb/cxusb.h +++ b/drivers/media/usb/dvb-usb/cxusb.h @@ -37,7 +37,6 @@ struct cxusb_state { struct i2c_client *i2c_client_tuner; unsigned char data[MAX_XFER_SIZE]; - struct mutex data_mutex; }; #endif diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c index f88572c7ae7c..fcbff7fb0c4e 100644 --- a/drivers/media/usb/dvb-usb/dtt200u.c +++ b/drivers/media/usb/dvb-usb/dtt200u.c @@ -22,7 +22,6 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); struct dtt200u_state { unsigned char data[80]; - struct mutex data_mutex; }; static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) @@ -30,23 +29,24 @@ static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) struct dtt200u_state *st = d->priv; int ret = 0; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = SET_INIT; if (onoff) ret = dvb_usb_generic_write(d, st->data, 2); - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { - struct dtt200u_state *st = adap->dev->priv; + struct dvb_usb_device *d = adap->dev; + struct dtt200u_state *st = d->priv; int ret; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = SET_STREAMING; st->data[1] = onoff; @@ -61,26 +61,27 @@ static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) ret = dvb_usb_generic_write(adap->dev, st->data, 1); ret: - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) { - struct dtt200u_state *st = adap->dev->priv; + struct dvb_usb_device *d = adap->dev; + struct dtt200u_state *st = d->priv; int ret; pid = onoff ? pid : 0; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = SET_PID_FILTER; st->data[1] = index; st->data[2] = pid & 0xff; st->data[3] = (pid >> 8) & 0x1f; ret = dvb_usb_generic_write(adap->dev, st->data, 4); - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -91,7 +92,7 @@ static int dtt200u_rc_query(struct dvb_usb_device *d) u32 scancode; int ret; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = GET_RC_CODE; ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); @@ -126,7 +127,7 @@ static int dtt200u_rc_query(struct dvb_usb_device *d) deb_info("st->data: %*ph\n", 5, st->data); ret: - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -145,24 +146,17 @@ static struct dvb_usb_device_properties wt220u_miglia_properties; static int dtt200u_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct dvb_usb_device *d; - struct dtt200u_state *st; - if (0 == dvb_usb_device_init(intf, &dtt200u_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_fc_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_zl0353_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_miglia_properties, - THIS_MODULE, &d, adapter_nr)) { - st = d->priv; - mutex_init(&st->data_mutex); - + THIS_MODULE, NULL, adapter_nr)) return 0; - } return -ENODEV; } diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c index 3896ba9a4179..84308569e7dc 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb-init.c +++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c @@ -142,6 +142,7 @@ static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums) { int ret = 0; + mutex_init(&d->data_mutex); mutex_init(&d->usb_mutex); mutex_init(&d->i2c_mutex); diff --git a/drivers/media/usb/dvb-usb/dvb-usb.h b/drivers/media/usb/dvb-usb/dvb-usb.h index 639c4678c65b..107255b08b2b 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb.h +++ b/drivers/media/usb/dvb-usb/dvb-usb.h @@ -404,8 +404,12 @@ struct dvb_usb_adapter { * Powered is in/decremented for each call to modify the state. * @udev: pointer to the device's struct usb_device. * - * @usb_mutex: semaphore of USB control messages (reading needs two messages) - * @i2c_mutex: semaphore for i2c-transfers + * @data_mutex: mutex to protect the data structure used to store URB data + * @usb_mutex: mutex of USB control messages (reading needs two messages). + * Please notice that this mutex is used internally at the generic + * URB control functions. So, drivers using dvb_usb_generic_rw() and + * derivated functions should not lock it internally. + * @i2c_mutex: mutex for i2c-transfers * * @i2c_adap: device's i2c_adapter if it uses I2CoverUSB * @@ -433,6 +437,7 @@ struct dvb_usb_device { int powered; /* locking */ + struct mutex data_mutex; struct mutex usb_mutex; /* i2c */ -- cgit From 1596c387e970cb680d4031fbe4d6eb2c2a4ddb63 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 12 Nov 2016 12:46:27 -0200 Subject: gp8psk: fix gp8psk_usb_in_op() logic Commit bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") fixed the usage of DMA on stack, but the memcpy was wrong for gp8psk_usb_in_op(). Fix it. From Derek's email: "Fix confirmed using 2 different Skywalker models with HD mpeg4, SD mpeg2." Suggested-by: Johannes Stezenbach Fixes: bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") Tested-by: Derek Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Linus Torvalds --- drivers/media/usb/dvb-usb/gp8psk.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c index adfd76491451..2829e3082d15 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.c +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -67,7 +67,6 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 return ret; while (ret >= 0 && ret != blen && try < 3) { - memcpy(st->data, b, blen); ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev,0), req, @@ -81,8 +80,10 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 if (ret < 0 || ret != blen) { warn("usb in %d operation failed.", req); ret = -EIO; - } else + } else { ret = 0; + memcpy(b, st->data, blen); + } deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index); debug_dump(b,blen,deb_xfer); -- cgit From 7a0786c19d65bd4502b4a53aec9ef75e18192a00 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 12 Nov 2016 12:46:28 -0200 Subject: gp8psk: Fix DVB frontend attach The DVB binding schema at the DVB core assumes that the frontend is a separate driver. Faling to do that causes OOPS when the module is removed, as it tries to do a symbol_put_addr on an internal symbol, causing craches like: WARNING: CPU: 1 PID: 28102 at kernel/module.c:1108 module_put+0x57/0x70 Modules linked in: dvb_usb_gp8psk(-) dvb_usb dvb_core nvidia_drm(PO) nvidia_modeset(PO) snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd soundcore nvidia(PO) [last unloaded: rc_core] CPU: 1 PID: 28102 Comm: rmmod Tainted: P WC O 4.8.4-build.1 #1 Hardware name: MSI MS-7309/MS-7309, BIOS V1.12 02/23/2009 Call Trace: dump_stack+0x44/0x64 __warn+0xfa/0x120 module_put+0x57/0x70 module_put+0x57/0x70 warn_slowpath_null+0x23/0x30 module_put+0x57/0x70 gp8psk_fe_set_frontend+0x460/0x460 [dvb_usb_gp8psk] symbol_put_addr+0x27/0x50 dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb] From Derek's tests: "Attach bug is fixed, tuning works, module unloads without crashing. Everything seems ok!" Reported-by: Derek Tested-by: Derek Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Linus Torvalds --- drivers/media/dvb-frontends/Kconfig | 5 + drivers/media/dvb-frontends/Makefile | 1 + drivers/media/dvb-frontends/gp8psk-fe.c | 397 ++++++++++++++++++++++++++++++++ drivers/media/dvb-frontends/gp8psk-fe.h | 82 +++++++ drivers/media/usb/dvb-usb/Makefile | 2 +- drivers/media/usb/dvb-usb/gp8psk-fe.c | 372 ------------------------------ drivers/media/usb/dvb-usb/gp8psk.c | 106 ++++++--- drivers/media/usb/dvb-usb/gp8psk.h | 63 ----- 8 files changed, 561 insertions(+), 467 deletions(-) create mode 100644 drivers/media/dvb-frontends/gp8psk-fe.c create mode 100644 drivers/media/dvb-frontends/gp8psk-fe.h delete mode 100644 drivers/media/usb/dvb-usb/gp8psk-fe.c diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig index 012225587c25..b71b747ee0ba 100644 --- a/drivers/media/dvb-frontends/Kconfig +++ b/drivers/media/dvb-frontends/Kconfig @@ -513,6 +513,11 @@ config DVB_AS102_FE depends on DVB_CORE default DVB_AS102 +config DVB_GP8PSK_FE + tristate + depends on DVB_CORE + default DVB_USB_GP8PSK + comment "DVB-C (cable) frontends" depends on DVB_CORE diff --git a/drivers/media/dvb-frontends/Makefile b/drivers/media/dvb-frontends/Makefile index e90165ad361b..93921a4eaa27 100644 --- a/drivers/media/dvb-frontends/Makefile +++ b/drivers/media/dvb-frontends/Makefile @@ -121,6 +121,7 @@ obj-$(CONFIG_DVB_RTL2832_SDR) += rtl2832_sdr.o obj-$(CONFIG_DVB_M88RS2000) += m88rs2000.o obj-$(CONFIG_DVB_AF9033) += af9033.o obj-$(CONFIG_DVB_AS102_FE) += as102_fe.o +obj-$(CONFIG_DVB_GP8PSK_FE) += gp8psk-fe.o obj-$(CONFIG_DVB_TC90522) += tc90522.o obj-$(CONFIG_DVB_HORUS3A) += horus3a.o obj-$(CONFIG_DVB_ASCOT2E) += ascot2e.o diff --git a/drivers/media/dvb-frontends/gp8psk-fe.c b/drivers/media/dvb-frontends/gp8psk-fe.c new file mode 100644 index 000000000000..be19afeed7a9 --- /dev/null +++ b/drivers/media/dvb-frontends/gp8psk-fe.c @@ -0,0 +1,397 @@ +/* DVB USB compliant Linux driver for the + * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module + * + * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) + * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com) + * + * Thanks to GENPIX for the sample code used to implement this module. + * + * This module is based off the vp7045 and vp702x modules + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "gp8psk-fe.h" +#include "dvb_frontend.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); + +#define dprintk(fmt, arg...) do { \ + if (debug) \ + printk(KERN_DEBUG pr_fmt("%s: " fmt), \ + __func__, ##arg); \ +} while (0) + +struct gp8psk_fe_state { + struct dvb_frontend fe; + void *priv; + const struct gp8psk_fe_ops *ops; + bool is_rev1; + u8 lock; + u16 snr; + unsigned long next_status_check; + unsigned long status_check_interval; +}; + +static int gp8psk_tuned_to_DCII(struct dvb_frontend *fe) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + u8 status; + + st->ops->in(st->priv, GET_8PSK_CONFIG, 0, 0, &status, 1); + return status & bmDCtuned; +} + +static int gp8psk_set_tuner_mode(struct dvb_frontend *fe, int mode) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + + return st->ops->out(st->priv, SET_8PSK_CONFIG, mode, 0, NULL, 0); +} + +static int gp8psk_fe_update_status(struct gp8psk_fe_state *st) +{ + u8 buf[6]; + if (time_after(jiffies,st->next_status_check)) { + st->ops->in(st->priv, GET_SIGNAL_LOCK, 0, 0, &st->lock, 1); + st->ops->in(st->priv, GET_SIGNAL_STRENGTH, 0, 0, buf, 6); + st->snr = (buf[1]) << 8 | buf[0]; + st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000; + } + return 0; +} + +static int gp8psk_fe_read_status(struct dvb_frontend *fe, + enum fe_status *status) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + gp8psk_fe_update_status(st); + + if (st->lock) + *status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER; + else + *status = 0; + + if (*status & FE_HAS_LOCK) + st->status_check_interval = 1000; + else + st->status_check_interval = 100; + return 0; +} + +/* not supported by this Frontend */ +static int gp8psk_fe_read_ber(struct dvb_frontend* fe, u32 *ber) +{ + (void) fe; + *ber = 0; + return 0; +} + +/* not supported by this Frontend */ +static int gp8psk_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) +{ + (void) fe; + *unc = 0; + return 0; +} + +static int gp8psk_fe_read_snr(struct dvb_frontend* fe, u16 *snr) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + gp8psk_fe_update_status(st); + /* snr is reported in dBu*256 */ + *snr = st->snr; + return 0; +} + +static int gp8psk_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + gp8psk_fe_update_status(st); + /* snr is reported in dBu*256 */ + /* snr / 38.4 ~= 100% strength */ + /* snr * 17 returns 100% strength as 65535 */ + if (st->snr > 0xf00) + *strength = 0xffff; + else + *strength = (st->snr << 4) + st->snr; /* snr*17 */ + return 0; +} + +static int gp8psk_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 800; + return 0; +} + +static int gp8psk_fe_set_frontend(struct dvb_frontend *fe) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + struct dtv_frontend_properties *c = &fe->dtv_property_cache; + u8 cmd[10]; + u32 freq = c->frequency * 1000; + + dprintk("%s()\n", __func__); + + cmd[4] = freq & 0xff; + cmd[5] = (freq >> 8) & 0xff; + cmd[6] = (freq >> 16) & 0xff; + cmd[7] = (freq >> 24) & 0xff; + + /* backwards compatibility: DVB-S + 8-PSK were used for Turbo-FEC */ + if (c->delivery_system == SYS_DVBS && c->modulation == PSK_8) + c->delivery_system = SYS_TURBO; + + switch (c->delivery_system) { + case SYS_DVBS: + if (c->modulation != QPSK) { + dprintk("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; + } + c->fec_inner = FEC_AUTO; + break; + case SYS_DVBS2: /* kept for backwards compatibility */ + dprintk("%s: DVB-S2 delivery system selected\n", __func__); + break; + case SYS_TURBO: + dprintk("%s: Turbo-FEC delivery system selected\n", __func__); + break; + + default: + dprintk("%s: unsupported delivery system selected (%d)\n", + __func__, c->delivery_system); + return -EOPNOTSUPP; + } + + cmd[0] = c->symbol_rate & 0xff; + cmd[1] = (c->symbol_rate >> 8) & 0xff; + cmd[2] = (c->symbol_rate >> 16) & 0xff; + cmd[3] = (c->symbol_rate >> 24) & 0xff; + switch (c->modulation) { + case QPSK: + if (st->is_rev1) + if (gp8psk_tuned_to_DCII(fe)) + st->ops->reload(st->priv); + switch (c->fec_inner) { + case FEC_1_2: + cmd[9] = 0; break; + case FEC_2_3: + cmd[9] = 1; break; + case FEC_3_4: + cmd[9] = 2; break; + case FEC_5_6: + cmd[9] = 3; break; + case FEC_7_8: + cmd[9] = 4; break; + case FEC_AUTO: + cmd[9] = 5; break; + default: + cmd[9] = 5; break; + } + if (c->delivery_system == SYS_TURBO) + cmd[8] = ADV_MOD_TURBO_QPSK; + else + cmd[8] = ADV_MOD_DVB_QPSK; + break; + case PSK_8: /* PSK_8 is for compatibility with DN */ + cmd[8] = ADV_MOD_TURBO_8PSK; + switch (c->fec_inner) { + case FEC_2_3: + cmd[9] = 0; break; + case FEC_3_4: + cmd[9] = 1; break; + case FEC_3_5: + cmd[9] = 2; break; + case FEC_5_6: + cmd[9] = 3; break; + case FEC_8_9: + cmd[9] = 4; break; + default: + cmd[9] = 0; break; + } + break; + case QAM_16: /* QAM_16 is for compatibility with DN */ + cmd[8] = ADV_MOD_TURBO_16QAM; + cmd[9] = 0; + break; + default: /* Unknown modulation */ + dprintk("%s: unsupported modulation selected (%d)\n", + __func__, c->modulation); + return -EOPNOTSUPP; + } + + if (st->is_rev1) + gp8psk_set_tuner_mode(fe, 0); + st->ops->out(st->priv, TUNE_8PSK, 0, 0, cmd, 10); + + st->lock = 0; + st->next_status_check = jiffies; + st->status_check_interval = 200; + + return 0; +} + +static int gp8psk_fe_send_diseqc_msg (struct dvb_frontend* fe, + struct dvb_diseqc_master_cmd *m) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + + dprintk("%s\n", __func__); + + if (st->ops->out(st->priv, SEND_DISEQC_COMMAND, m->msg[0], 0, + m->msg, m->msg_len)) { + return -EINVAL; + } + return 0; +} + +static int gp8psk_fe_send_diseqc_burst(struct dvb_frontend *fe, + enum fe_sec_mini_cmd burst) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + u8 cmd; + + dprintk("%s\n", __func__); + + /* These commands are certainly wrong */ + cmd = (burst == SEC_MINI_A) ? 0x00 : 0x01; + + if (st->ops->out(st->priv, SEND_DISEQC_COMMAND, cmd, 0, + &cmd, 0)) { + return -EINVAL; + } + return 0; +} + +static int gp8psk_fe_set_tone(struct dvb_frontend *fe, + enum fe_sec_tone_mode tone) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + + if (st->ops->out(st->priv, SET_22KHZ_TONE, + (tone == SEC_TONE_ON), 0, NULL, 0)) { + return -EINVAL; + } + return 0; +} + +static int gp8psk_fe_set_voltage(struct dvb_frontend *fe, + enum fe_sec_voltage voltage) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + + if (st->ops->out(st->priv, SET_LNB_VOLTAGE, + voltage == SEC_VOLTAGE_18, 0, NULL, 0)) { + return -EINVAL; + } + return 0; +} + +static int gp8psk_fe_enable_high_lnb_voltage(struct dvb_frontend* fe, long onoff) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + + return st->ops->out(st->priv, USE_EXTRA_VOLT, onoff, 0, NULL, 0); +} + +static int gp8psk_fe_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long sw_cmd) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + u8 cmd = sw_cmd & 0x7f; + + if (st->ops->out(st->priv, SET_DN_SWITCH, cmd, 0, NULL, 0)) + return -EINVAL; + + if (st->ops->out(st->priv, SET_LNB_VOLTAGE, !!(sw_cmd & 0x80), + 0, NULL, 0)) + return -EINVAL; + + return 0; +} + +static void gp8psk_fe_release(struct dvb_frontend* fe) +{ + struct gp8psk_fe_state *st = fe->demodulator_priv; + + kfree(st); +} + +static struct dvb_frontend_ops gp8psk_fe_ops; + +struct dvb_frontend *gp8psk_fe_attach(const struct gp8psk_fe_ops *ops, + void *priv, bool is_rev1) +{ + struct gp8psk_fe_state *st; + + if (!ops || !ops->in || !ops->out || !ops->reload) { + pr_err("Error! gp8psk-fe ops not defined.\n"); + return NULL; + } + + st = kzalloc(sizeof(struct gp8psk_fe_state), GFP_KERNEL); + if (!st) + return NULL; + + memcpy(&st->fe.ops, &gp8psk_fe_ops, sizeof(struct dvb_frontend_ops)); + st->fe.demodulator_priv = st; + st->ops = ops; + st->priv = priv; + st->is_rev1 = is_rev1; + + pr_info("Frontend %sattached\n", is_rev1 ? "revision 1 " : ""); + + return &st->fe; +} +EXPORT_SYMBOL_GPL(gp8psk_fe_attach); + +static struct dvb_frontend_ops gp8psk_fe_ops = { + .delsys = { SYS_DVBS }, + .info = { + .name = "Genpix DVB-S", + .frequency_min = 800000, + .frequency_max = 2250000, + .frequency_stepsize = 100, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + .symbol_rate_tolerance = 500, /* ppm */ + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + /* + * FE_CAN_QAM_16 is for compatibility + * (Myth incorrectly detects Turbo-QPSK as plain QAM-16) + */ + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_TURBO_FEC + }, + + .release = gp8psk_fe_release, + + .init = NULL, + .sleep = NULL, + + .set_frontend = gp8psk_fe_set_frontend, + + .get_tune_settings = gp8psk_fe_get_tune_settings, + + .read_status = gp8psk_fe_read_status, + .read_ber = gp8psk_fe_read_ber, + .read_signal_strength = gp8psk_fe_read_signal_strength, + .read_snr = gp8psk_fe_read_snr, + .read_ucblocks = gp8psk_fe_read_unc_blocks, + + .diseqc_send_master_cmd = gp8psk_fe_send_diseqc_msg, + .diseqc_send_burst = gp8psk_fe_send_diseqc_burst, + .set_tone = gp8psk_fe_set_tone, + .set_voltage = gp8psk_fe_set_voltage, + .dishnetwork_send_legacy_command = gp8psk_fe_send_legacy_dish_cmd, + .enable_high_lnb_voltage = gp8psk_fe_enable_high_lnb_voltage +}; diff --git a/drivers/media/dvb-frontends/gp8psk-fe.h b/drivers/media/dvb-frontends/gp8psk-fe.h new file mode 100644 index 000000000000..6c7944b1ecd6 --- /dev/null +++ b/drivers/media/dvb-frontends/gp8psk-fe.h @@ -0,0 +1,82 @@ +/* + * gp8psk_fe driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef GP8PSK_FE_H +#define GP8PSK_FE_H + +#include + +/* gp8psk commands */ + +#define GET_8PSK_CONFIG 0x80 /* in */ +#define SET_8PSK_CONFIG 0x81 +#define I2C_WRITE 0x83 +#define I2C_READ 0x84 +#define ARM_TRANSFER 0x85 +#define TUNE_8PSK 0x86 +#define GET_SIGNAL_STRENGTH 0x87 /* in */ +#define LOAD_BCM4500 0x88 +#define BOOT_8PSK 0x89 /* in */ +#define START_INTERSIL 0x8A /* in */ +#define SET_LNB_VOLTAGE 0x8B +#define SET_22KHZ_TONE 0x8C +#define SEND_DISEQC_COMMAND 0x8D +#define SET_DVB_MODE 0x8E +#define SET_DN_SWITCH 0x8F +#define GET_SIGNAL_LOCK 0x90 /* in */ +#define GET_FW_VERS 0x92 +#define GET_SERIAL_NUMBER 0x93 /* in */ +#define USE_EXTRA_VOLT 0x94 +#define GET_FPGA_VERS 0x95 +#define CW3K_INIT 0x9d + +/* PSK_configuration bits */ +#define bm8pskStarted 0x01 +#define bm8pskFW_Loaded 0x02 +#define bmIntersilOn 0x04 +#define bmDVBmode 0x08 +#define bm22kHz 0x10 +#define bmSEL18V 0x20 +#define bmDCtuned 0x40 +#define bmArmed 0x80 + +/* Satellite modulation modes */ +#define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */ +#define ADV_MOD_TURBO_QPSK 1 /* Turbo QPSK */ +#define ADV_MOD_TURBO_8PSK 2 /* Turbo 8PSK (also used for Trellis 8PSK) */ +#define ADV_MOD_TURBO_16QAM 3 /* Turbo 16QAM (also used for Trellis 8PSK) */ + +#define ADV_MOD_DCII_C_QPSK 4 /* Digicipher II Combo */ +#define ADV_MOD_DCII_I_QPSK 5 /* Digicipher II I-stream */ +#define ADV_MOD_DCII_Q_QPSK 6 /* Digicipher II Q-stream */ +#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */ +#define ADV_MOD_DSS_QPSK 8 /* DSS (DIRECTV) QPSK */ +#define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */ + +/* firmware revision id's */ +#define GP8PSK_FW_REV1 0x020604 +#define GP8PSK_FW_REV2 0x020704 +#define GP8PSK_FW_VERS(_fw_vers) \ + ((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0]) + +struct gp8psk_fe_ops { + int (*in)(void *priv, u8 req, u16 value, u16 index, u8 *b, int blen); + int (*out)(void *priv, u8 req, u16 value, u16 index, u8 *b, int blen); + int (*reload)(void *priv); +}; + +struct dvb_frontend *gp8psk_fe_attach(const struct gp8psk_fe_ops *ops, + void *priv, bool is_rev1); + +#endif diff --git a/drivers/media/usb/dvb-usb/Makefile b/drivers/media/usb/dvb-usb/Makefile index 2a7b5a963acf..3b3f32b426d1 100644 --- a/drivers/media/usb/dvb-usb/Makefile +++ b/drivers/media/usb/dvb-usb/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_DVB_USB_VP7045) += dvb-usb-vp7045.o dvb-usb-vp702x-objs := vp702x.o vp702x-fe.o obj-$(CONFIG_DVB_USB_VP702X) += dvb-usb-vp702x.o -dvb-usb-gp8psk-objs := gp8psk.o gp8psk-fe.o +dvb-usb-gp8psk-objs := gp8psk.o obj-$(CONFIG_DVB_USB_GP8PSK) += dvb-usb-gp8psk.o dvb-usb-dtt200u-objs := dtt200u.o dtt200u-fe.o diff --git a/drivers/media/usb/dvb-usb/gp8psk-fe.c b/drivers/media/usb/dvb-usb/gp8psk-fe.c deleted file mode 100644 index db6eb79cde07..000000000000 --- a/drivers/media/usb/dvb-usb/gp8psk-fe.c +++ /dev/null @@ -1,372 +0,0 @@ -/* DVB USB compliant Linux driver for the - * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module - * - * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) - * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com) - * - * Thanks to GENPIX for the sample code used to implement this module. - * - * This module is based off the vp7045 and vp702x modules - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#include "gp8psk.h" - -struct gp8psk_fe_state { - struct dvb_frontend fe; - struct dvb_usb_device *d; - u8 lock; - u16 snr; - unsigned long next_status_check; - unsigned long status_check_interval; -}; - -static int gp8psk_tuned_to_DCII(struct dvb_frontend *fe) -{ - struct gp8psk_fe_state *st = fe->demodulator_priv; - u8 status; - gp8psk_usb_in_op(st->d, GET_8PSK_CONFIG, 0, 0, &status, 1); - return status & bmDCtuned; -} - -static int gp8psk_set_tuner_mode(struct dvb_frontend *fe, int mode) -{ - struct gp8psk_fe_state *state = fe->demodulator_priv; - return gp8psk_usb_out_op(state->d, SET_8PSK_CONFIG, mode, 0, NULL, 0); -} - -static int gp8psk_fe_update_status(struct gp8psk_fe_state *st) -{ - u8 buf[6]; - if (time_after(jiffies,st->next_status_check)) { - gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0,0,&st->lock,1); - gp8psk_usb_in_op(st->d, GET_SIGNAL_STRENGTH, 0,0,buf,6); - st->snr = (buf[1]) << 8 | buf[0]; - st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000; - } - return 0; -} - -static int gp8psk_fe_read_status(struct dvb_frontend *fe, - enum fe_status *status) -{ - struct gp8psk_fe_state *st = fe->demodulator_priv; - gp8psk_fe_update_status(st); - - if (st->lock) - *status = FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI | FE_HAS_SIGNAL | FE_HAS_CARRIER; - else - *status = 0; - - if (*status & FE_HAS_LOCK) - st->status_check_interval = 1000; - else - st->status_check_interval = 100; - return 0; -} - -/* not supported by this Frontend */ -static int gp8psk_fe_read_ber(struct dvb_frontend* fe, u32 *ber) -{ - (void) fe; - *ber = 0; - return 0; -} - -/* not supported by this Frontend */ -static int gp8psk_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) -{ - (void) fe; - *unc = 0; - return 0; -} - -static int gp8psk_fe_read_snr(struct dvb_frontend* fe, u16 *snr) -{ - struct gp8psk_fe_state *st = fe->demodulator_priv; - gp8psk_fe_update_status(st); - /* snr is reported in dBu*256 */ - *snr = st->snr; - return 0; -} - -static int gp8psk_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) -{ - struct gp8psk_fe_state *st = fe->demodulator_priv; - gp8psk_fe_update_status(st); - /* snr is reported in dBu*256 */ - /* snr / 38.4 ~= 100% strength */ - /* snr * 17 returns 100% strength as 65535 */ - if (st->snr > 0xf00) - *strength = 0xffff; - else - *strength = (st->snr << 4) + st->snr; /* snr*17 */ - return 0; -} - -static int gp8psk_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) -{ - tune->min_delay_ms = 800; - return 0; -} - -static int gp8psk_fe_set_frontend(struct dvb_frontend *fe) -{ - struct gp8psk_fe_state *state = fe->demodulator_priv; - struct dtv_frontend_properties *c = &fe->dtv_property_cache; - u8 cmd[10]; - u32 freq = c->frequency * 1000; - int gp_product_id = le16_to_cpu(state->d->udev->descriptor.idProduct); - - deb_fe("%s()\n", __func__); - - cmd[4] = freq & 0xff; - cmd[5] = (freq >> 8) & 0xff; - cmd[6] = (freq >> 16) & 0xff; - cmd[7] = (freq >> 24) & 0xff; - - /* backwards compatibility: DVB-S + 8-PSK were used for Turbo-FEC */ - if (c->delivery_system == SYS_DVBS && c->modulation == PSK_8) - c->delivery_system = SYS_TURBO; - - switch (c->delivery_system) { - case SYS_DVBS: - if (c->modulation != QPSK) { - deb_fe("%s: unsupported modulation selected (%d)\n", - __func__, c->modulation); - return -EOPNOTSUPP; - } - c->fec_inner = FEC_AUTO; - break; - case SYS_DVBS2: /* kept for backwards compatibility */ - deb_fe("%s: DVB-S2 delivery system selected\n", __func__); - break; - case SYS_TURBO: - deb_fe("%s: Turbo-FEC delivery system selected\n", __func__); - break; - - default: - deb_fe("%s: unsupported delivery system selected (%d)\n", - __func__, c->delivery_system); - return -EOPNOTSUPP; - } - - cmd[0] = c->symbol_rate & 0xff; - cmd[1] = (c->symbol_rate >> 8) & 0xff; - cmd[2] = (c->symbol_rate >> 16) & 0xff; - cmd[3] = (c->symbol_rate >> 24) & 0xff; - switch (c->modulation) { - case QPSK: - if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) - if (gp8psk_tuned_to_DCII(fe)) - gp8psk_bcm4500_reload(state->d); - switch (c->fec_inner) { - case FEC_1_2: - cmd[9] = 0; break; - case FEC_2_3: - cmd[9] = 1; break; - case FEC_3_4: - cmd[9] = 2; break; - case FEC_5_6: - cmd[9] = 3; break; - case FEC_7_8: - cmd[9] = 4; break; - case FEC_AUTO: - cmd[9] = 5; break; - default: - cmd[9] = 5; break; - } - if (c->delivery_system == SYS_TURBO) - cmd[8] = ADV_MOD_TURBO_QPSK; - else - cmd[8] = ADV_MOD_DVB_QPSK; - break; - case PSK_8: /* PSK_8 is for compatibility with DN */ - cmd[8] = ADV_MOD_TURBO_8PSK; - switch (c->fec_inner) { - case FEC_2_3: - cmd[9] = 0; break; - case FEC_3_4: - cmd[9] = 1; break; - case FEC_3_5: - cmd[9] = 2; break; - case FEC_5_6: - cmd[9] = 3; break; - case FEC_8_9: - cmd[9] = 4; break; - default: - cmd[9] = 0; break; - } - break; - case QAM_16: /* QAM_16 is for compatibility with DN */ - cmd[8] = ADV_MOD_TURBO_16QAM; - cmd[9] = 0; - break; - default: /* Unknown modulation */ - deb_fe("%s: unsupported modulation selected (%d)\n", - __func__, c->modulation); - return -EOPNOTSUPP; - } - - if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) - gp8psk_set_tuner_mode(fe, 0); - gp8psk_usb_out_op(state->d, TUNE_8PSK, 0, 0, cmd, 10); - - state->lock = 0; - state->next_status_check = jiffies; - state->status_check_interval = 200; - - return 0; -} - -static int gp8psk_fe_send_diseqc_msg (struct dvb_frontend* fe, - struct dvb_diseqc_master_cmd *m) -{ - struct gp8psk_fe_state *st = fe->demodulator_priv; - - deb_fe("%s\n",__func__); - - if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, m->msg[0], 0, - m->msg, m->msg_len)) { - return -EINVAL; - } - return 0; -} - -static int gp8psk_fe_send_diseqc_burst(struct dvb_frontend *fe, - enum fe_sec_mini_cmd burst) -{ - struct gp8psk_fe_state *st = fe->demodulator_priv; - u8 cmd; - - deb_fe("%s\n",__func__); - - /* These commands are certainly wrong */ - cmd = (burst == SEC_MINI_A) ? 0x00 : 0x01; - - if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, cmd, 0, - &cmd, 0)) { - return -EINVAL; - } - return 0; -} - -static int gp8psk_fe_set_tone(struct dvb_frontend *fe, - enum fe_sec_tone_mode tone) -{ - struct gp8psk_fe_state* state = fe->demodulator_priv; - - if (gp8psk_usb_out_op(state->d,SET_22KHZ_TONE, - (tone == SEC_TONE_ON), 0, NULL, 0)) { - return -EINVAL; - } - return 0; -} - -static int gp8psk_fe_set_voltage(struct dvb_frontend *fe, - enum fe_sec_voltage voltage) -{ - struct gp8psk_fe_state* state = fe->demodulator_priv; - - if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, - voltage == SEC_VOLTAGE_18, 0, NULL, 0)) { - return -EINVAL; - } - return 0; -} - -static int gp8psk_fe_enable_high_lnb_voltage(struct dvb_frontend* fe, long onoff) -{ - struct gp8psk_fe_state* state = fe->demodulator_priv; - return gp8psk_usb_out_op(state->d, USE_EXTRA_VOLT, onoff, 0,NULL,0); -} - -static int gp8psk_fe_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long sw_cmd) -{ - struct gp8psk_fe_state* state = fe->demodulator_priv; - u8 cmd = sw_cmd & 0x7f; - - if (gp8psk_usb_out_op(state->d,SET_DN_SWITCH, cmd, 0, - NULL, 0)) { - return -EINVAL; - } - if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, !!(sw_cmd & 0x80), - 0, NULL, 0)) { - return -EINVAL; - } - - return 0; -} - -static void gp8psk_fe_release(struct dvb_frontend* fe) -{ - struct gp8psk_fe_state *state = fe->demodulator_priv; - kfree(state); -} - -static struct dvb_frontend_ops gp8psk_fe_ops; - -struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d) -{ - struct gp8psk_fe_state *s = kzalloc(sizeof(struct gp8psk_fe_state), GFP_KERNEL); - if (s == NULL) - goto error; - - s->d = d; - memcpy(&s->fe.ops, &gp8psk_fe_ops, sizeof(struct dvb_frontend_ops)); - s->fe.demodulator_priv = s; - - goto success; -error: - return NULL; -success: - return &s->fe; -} - - -static struct dvb_frontend_ops gp8psk_fe_ops = { - .delsys = { SYS_DVBS }, - .info = { - .name = "Genpix DVB-S", - .frequency_min = 800000, - .frequency_max = 2250000, - .frequency_stepsize = 100, - .symbol_rate_min = 1000000, - .symbol_rate_max = 45000000, - .symbol_rate_tolerance = 500, /* ppm */ - .caps = FE_CAN_INVERSION_AUTO | - FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | - FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | - /* - * FE_CAN_QAM_16 is for compatibility - * (Myth incorrectly detects Turbo-QPSK as plain QAM-16) - */ - FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_TURBO_FEC - }, - - .release = gp8psk_fe_release, - - .init = NULL, - .sleep = NULL, - - .set_frontend = gp8psk_fe_set_frontend, - - .get_tune_settings = gp8psk_fe_get_tune_settings, - - .read_status = gp8psk_fe_read_status, - .read_ber = gp8psk_fe_read_ber, - .read_signal_strength = gp8psk_fe_read_signal_strength, - .read_snr = gp8psk_fe_read_snr, - .read_ucblocks = gp8psk_fe_read_unc_blocks, - - .diseqc_send_master_cmd = gp8psk_fe_send_diseqc_msg, - .diseqc_send_burst = gp8psk_fe_send_diseqc_burst, - .set_tone = gp8psk_fe_set_tone, - .set_voltage = gp8psk_fe_set_voltage, - .dishnetwork_send_legacy_command = gp8psk_fe_send_legacy_dish_cmd, - .enable_high_lnb_voltage = gp8psk_fe_enable_high_lnb_voltage -}; diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c index 2829e3082d15..993bb7a72985 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.c +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -15,6 +15,7 @@ * see Documentation/dvb/README.dvb-usb for more information */ #include "gp8psk.h" +#include "gp8psk-fe.h" /* debug */ static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw"; @@ -28,34 +29,8 @@ struct gp8psk_state { unsigned char data[80]; }; -static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers) -{ - return (gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6)); -} - -static int gp8psk_get_fpga_version(struct dvb_usb_device *d, u8 *fpga_vers) -{ - return (gp8psk_usb_in_op(d, GET_FPGA_VERS, 0, 0, fpga_vers, 1)); -} - -static void gp8psk_info(struct dvb_usb_device *d) -{ - u8 fpga_vers, fw_vers[6]; - - if (!gp8psk_get_fw_version(d, fw_vers)) - info("FW Version = %i.%02i.%i (0x%x) Build %4i/%02i/%02i", - fw_vers[2], fw_vers[1], fw_vers[0], GP8PSK_FW_VERS(fw_vers), - 2000 + fw_vers[5], fw_vers[4], fw_vers[3]); - else - info("failed to get FW version"); - - if (!gp8psk_get_fpga_version(d, &fpga_vers)) - info("FPGA Version = %i", fpga_vers); - else - info("failed to get FPGA version"); -} - -int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) +static int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, + u16 index, u8 *b, int blen) { struct gp8psk_state *st = d->priv; int ret = 0,try = 0; @@ -93,7 +68,7 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 return ret; } -int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, +static int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) { struct gp8psk_state *st = d->priv; @@ -124,6 +99,34 @@ int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, return ret; } + +static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers) +{ + return gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6); +} + +static int gp8psk_get_fpga_version(struct dvb_usb_device *d, u8 *fpga_vers) +{ + return gp8psk_usb_in_op(d, GET_FPGA_VERS, 0, 0, fpga_vers, 1); +} + +static void gp8psk_info(struct dvb_usb_device *d) +{ + u8 fpga_vers, fw_vers[6]; + + if (!gp8psk_get_fw_version(d, fw_vers)) + info("FW Version = %i.%02i.%i (0x%x) Build %4i/%02i/%02i", + fw_vers[2], fw_vers[1], fw_vers[0], GP8PSK_FW_VERS(fw_vers), + 2000 + fw_vers[5], fw_vers[4], fw_vers[3]); + else + info("failed to get FW version"); + + if (!gp8psk_get_fpga_version(d, &fpga_vers)) + info("FPGA Version = %i", fpga_vers); + else + info("failed to get FPGA version"); +} + static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d) { int ret; @@ -226,10 +229,13 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) return 0; } -int gp8psk_bcm4500_reload(struct dvb_usb_device *d) +static int gp8psk_bcm4500_reload(struct dvb_usb_device *d) { u8 buf; int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct); + + deb_xfer("reloading firmware\n"); + /* Turn off 8psk power */ if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) return -EINVAL; @@ -248,9 +254,47 @@ static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) return gp8psk_usb_out_op(adap->dev, ARM_TRANSFER, onoff, 0 , NULL, 0); } +/* Callbacks for gp8psk-fe.c */ + +static int gp8psk_fe_in(void *priv, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + struct dvb_usb_device *d = priv; + + return gp8psk_usb_in_op(d, req, value, index, b, blen); +} + +static int gp8psk_fe_out(void *priv, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + struct dvb_usb_device *d = priv; + + return gp8psk_usb_out_op(d, req, value, index, b, blen); +} + +static int gp8psk_fe_reload(void *priv) +{ + struct dvb_usb_device *d = priv; + + return gp8psk_bcm4500_reload(d); +} + +const struct gp8psk_fe_ops gp8psk_fe_ops = { + .in = gp8psk_fe_in, + .out = gp8psk_fe_out, + .reload = gp8psk_fe_reload, +}; + static int gp8psk_frontend_attach(struct dvb_usb_adapter *adap) { - adap->fe_adap[0].fe = gp8psk_fe_attach(adap->dev); + struct dvb_usb_device *d = adap->dev; + int id = le16_to_cpu(d->udev->descriptor.idProduct); + int is_rev1; + + is_rev1 = (id == USB_PID_GENPIX_8PSK_REV_1_WARM) ? true : false; + + adap->fe_adap[0].fe = dvb_attach(gp8psk_fe_attach, + &gp8psk_fe_ops, d, is_rev1); return 0; } diff --git a/drivers/media/usb/dvb-usb/gp8psk.h b/drivers/media/usb/dvb-usb/gp8psk.h index ed32b9da4843..d8975b866dee 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.h +++ b/drivers/media/usb/dvb-usb/gp8psk.h @@ -24,58 +24,6 @@ extern int dvb_usb_gp8psk_debug; #define deb_info(args...) dprintk(dvb_usb_gp8psk_debug,0x01,args) #define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args) #define deb_rc(args...) dprintk(dvb_usb_gp8psk_debug,0x04,args) -#define deb_fe(args...) dprintk(dvb_usb_gp8psk_debug,0x08,args) - -/* Twinhan Vendor requests */ -#define TH_COMMAND_IN 0xC0 -#define TH_COMMAND_OUT 0xC1 - -/* gp8psk commands */ - -#define GET_8PSK_CONFIG 0x80 /* in */ -#define SET_8PSK_CONFIG 0x81 -#define I2C_WRITE 0x83 -#define I2C_READ 0x84 -#define ARM_TRANSFER 0x85 -#define TUNE_8PSK 0x86 -#define GET_SIGNAL_STRENGTH 0x87 /* in */ -#define LOAD_BCM4500 0x88 -#define BOOT_8PSK 0x89 /* in */ -#define START_INTERSIL 0x8A /* in */ -#define SET_LNB_VOLTAGE 0x8B -#define SET_22KHZ_TONE 0x8C -#define SEND_DISEQC_COMMAND 0x8D -#define SET_DVB_MODE 0x8E -#define SET_DN_SWITCH 0x8F -#define GET_SIGNAL_LOCK 0x90 /* in */ -#define GET_FW_VERS 0x92 -#define GET_SERIAL_NUMBER 0x93 /* in */ -#define USE_EXTRA_VOLT 0x94 -#define GET_FPGA_VERS 0x95 -#define CW3K_INIT 0x9d - -/* PSK_configuration bits */ -#define bm8pskStarted 0x01 -#define bm8pskFW_Loaded 0x02 -#define bmIntersilOn 0x04 -#define bmDVBmode 0x08 -#define bm22kHz 0x10 -#define bmSEL18V 0x20 -#define bmDCtuned 0x40 -#define bmArmed 0x80 - -/* Satellite modulation modes */ -#define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */ -#define ADV_MOD_TURBO_QPSK 1 /* Turbo QPSK */ -#define ADV_MOD_TURBO_8PSK 2 /* Turbo 8PSK (also used for Trellis 8PSK) */ -#define ADV_MOD_TURBO_16QAM 3 /* Turbo 16QAM (also used for Trellis 8PSK) */ - -#define ADV_MOD_DCII_C_QPSK 4 /* Digicipher II Combo */ -#define ADV_MOD_DCII_I_QPSK 5 /* Digicipher II I-stream */ -#define ADV_MOD_DCII_Q_QPSK 6 /* Digicipher II Q-stream */ -#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */ -#define ADV_MOD_DSS_QPSK 8 /* DSS (DIRECTV) QPSK */ -#define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */ #define GET_USB_SPEED 0x07 @@ -86,15 +34,4 @@ extern int dvb_usb_gp8psk_debug; #define PRODUCT_STRING_READ 0x0D #define FW_BCD_VERSION_READ 0x14 -/* firmware revision id's */ -#define GP8PSK_FW_REV1 0x020604 -#define GP8PSK_FW_REV2 0x020704 -#define GP8PSK_FW_VERS(_fw_vers) ((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0]) - -extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d); -extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); -extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, - u16 index, u8 *b, int blen); -extern int gp8psk_bcm4500_reload(struct dvb_usb_device *d); - #endif -- cgit From a25f0944ba9b1d8a6813fd6f1a86f1bd59ac25a6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 13 Nov 2016 10:32:32 -0800 Subject: Linux 4.9-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 06e2b73978e8..247430abfc73 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 9 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Psychotic Stoned Sheep # *DOCUMENTATION* -- cgit From 46d054f8f540612f09987a53154aa39ae15f2e4c Mon Sep 17 00:00:00 2001 From: Bert Kenward Date: Fri, 11 Nov 2016 15:56:51 +0000 Subject: sfc: clear napi_hash state when copying channels efx_copy_channel() doesn't correctly clear the napi_hash related state. This means that when napi_hash_add is called for that channel nothing is done, and we are left with a copy of the napi_hash_node from the old channel. When we later call napi_hash_del() on this channel we have a stale napi_hash_node. Corruption is only seen when there are multiple entries in one of the napi_hash lists. This is made more likely by having a very large number of channels. Testing was carried out with 512 channels - 32 channels on each of 16 ports. This failure typically appears as protection faults within napi_by_id() or napi_hash_add(). efx_copy_channel() is only used when tx or rx ring sizes are changed (ethtool -G). Fixes: 36763266bbe8 ("sfc: Add support for busy polling") Signed-off-by: Bert Kenward Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/efx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 3cf3557106c2..6b89e4a7b164 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -485,6 +485,9 @@ efx_copy_channel(const struct efx_channel *old_channel) *channel = *old_channel; channel->napi_dev = NULL; + INIT_HLIST_NODE(&channel->napi_str.napi_hash_node); + channel->napi_str.napi_id = 0; + channel->napi_str.state = 0; memset(&channel->eventq, 0, sizeof(channel->eventq)); for (j = 0; j < EFX_TXQ_TYPES; j++) { -- cgit From b7f193da17fb18b752bef77ce52eb49723299bd8 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Fri, 11 Nov 2016 11:00:45 -0600 Subject: ibmvnic: Unmap ibmvnic_statistics structure This structure was mapped but never subsequently unmapped. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index f6c9b6d38ac7..921c40fad1c3 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -3844,6 +3844,9 @@ static int ibmvnic_remove(struct vio_dev *dev) if (adapter->debugfs_dir && !IS_ERR(adapter->debugfs_dir)) debugfs_remove_recursive(adapter->debugfs_dir); + dma_unmap_single(&dev->dev, adapter->stats_token, + sizeof(struct ibmvnic_statistics), DMA_FROM_DEVICE); + if (adapter->ras_comps) dma_free_coherent(&dev->dev, adapter->ras_comp_num * -- cgit From e1fac0adf0f9b2c1eb49e658e6ed070a744bbaef Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Fri, 11 Nov 2016 11:00:46 -0600 Subject: ibmvnic: Fix size of debugfs name buffer This mistake was causing debugfs directory creation failures when multiple ibmvnic devices were probed. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 921c40fad1c3..4f3281a03e7e 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -3705,7 +3705,7 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) struct net_device *netdev; unsigned char *mac_addr_p; struct dentry *ent; - char buf[16]; /* debugfs name buf */ + char buf[17]; /* debugfs name buf */ int rc; dev_dbg(&dev->dev, "entering ibmvnic_probe for UA 0x%x\n", -- cgit From 7774d46b2037b98d3f7e414bffb1d53082dc139b Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sat, 12 Nov 2016 17:44:06 +0000 Subject: net: ethernet: ixp4xx_eth: fix spelling mistake in debug message Trivial fix to spelling mistake "successed" to "succeeded" in debug message. Also unwrap multi-line literal string. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/xscale/ixp4xx_eth.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c index 7f127dc1b7ba..fa32391720fe 100644 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c @@ -708,8 +708,7 @@ static int eth_poll(struct napi_struct *napi, int budget) if (!qmgr_stat_below_low_watermark(rxq) && napi_reschedule(napi)) { /* not empty again */ #if DEBUG_RX - printk(KERN_DEBUG "%s: eth_poll" - " napi_reschedule successed\n", + printk(KERN_DEBUG "%s: eth_poll napi_reschedule succeeded\n", dev->name); #endif qmgr_disable_irq(rxq); -- cgit From cedecbc5e0f39d2987b8e1004908e90459a82e78 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 8 Aug 2016 09:48:00 +0000 Subject: ntb_pingpong: Fix db_init parameter description Fix 'db_init' parameter description. Signed-off-by: Wei Yongjun Acked-by: Allen Hubbe Signed-off-by: Jon Mason --- drivers/ntb/test/ntb_pingpong.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ntb/test/ntb_pingpong.c b/drivers/ntb/test/ntb_pingpong.c index 7d311799fca1..435861189d97 100644 --- a/drivers/ntb/test/ntb_pingpong.c +++ b/drivers/ntb/test/ntb_pingpong.c @@ -88,7 +88,7 @@ MODULE_PARM_DESC(delay_ms, "Milliseconds to delay the response to peer"); static unsigned long db_init = 0x7; module_param(db_init, ulong, 0644); -MODULE_PARM_DESC(delay_ms, "Initial doorbell bits to ring on the peer"); +MODULE_PARM_DESC(db_init, "Initial doorbell bits to ring on the peer"); struct pp_ctx { struct ntb_dev *ntb; -- cgit From 49b89de41f8d97eb13a60c1865ed61fbebed0d15 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 8 Aug 2016 09:48:42 +0000 Subject: NTB: ntb_hw_intel: Fix typo in module parameter descriptions Fix typo in module parameter descriptions. Signed-off-by: Wei Yongjun Acked-by: Allen Hubbe Signed-off-by: Jon Mason --- drivers/ntb/hw/intel/ntb_hw_intel.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.c b/drivers/ntb/hw/intel/ntb_hw_intel.c index 0d5c29ae51de..1ee61d92c54b 100644 --- a/drivers/ntb/hw/intel/ntb_hw_intel.c +++ b/drivers/ntb/hw/intel/ntb_hw_intel.c @@ -112,17 +112,17 @@ MODULE_PARM_DESC(xeon_b2b_usd_bar2_addr64, module_param_named(xeon_b2b_usd_bar4_addr64, xeon_b2b_usd_addr.bar4_addr64, ullong, 0644); -MODULE_PARM_DESC(xeon_b2b_usd_bar2_addr64, +MODULE_PARM_DESC(xeon_b2b_usd_bar4_addr64, "XEON B2B USD BAR 4 64-bit address"); module_param_named(xeon_b2b_usd_bar4_addr32, xeon_b2b_usd_addr.bar4_addr32, ullong, 0644); -MODULE_PARM_DESC(xeon_b2b_usd_bar2_addr64, +MODULE_PARM_DESC(xeon_b2b_usd_bar4_addr32, "XEON B2B USD split-BAR 4 32-bit address"); module_param_named(xeon_b2b_usd_bar5_addr32, xeon_b2b_usd_addr.bar5_addr32, ullong, 0644); -MODULE_PARM_DESC(xeon_b2b_usd_bar2_addr64, +MODULE_PARM_DESC(xeon_b2b_usd_bar5_addr32, "XEON B2B USD split-BAR 5 32-bit address"); module_param_named(xeon_b2b_dsd_bar2_addr64, @@ -132,17 +132,17 @@ MODULE_PARM_DESC(xeon_b2b_dsd_bar2_addr64, module_param_named(xeon_b2b_dsd_bar4_addr64, xeon_b2b_dsd_addr.bar4_addr64, ullong, 0644); -MODULE_PARM_DESC(xeon_b2b_dsd_bar2_addr64, +MODULE_PARM_DESC(xeon_b2b_dsd_bar4_addr64, "XEON B2B DSD BAR 4 64-bit address"); module_param_named(xeon_b2b_dsd_bar4_addr32, xeon_b2b_dsd_addr.bar4_addr32, ullong, 0644); -MODULE_PARM_DESC(xeon_b2b_dsd_bar2_addr64, +MODULE_PARM_DESC(xeon_b2b_dsd_bar4_addr32, "XEON B2B DSD split-BAR 4 32-bit address"); module_param_named(xeon_b2b_dsd_bar5_addr32, xeon_b2b_dsd_addr.bar5_addr32, ullong, 0644); -MODULE_PARM_DESC(xeon_b2b_dsd_bar2_addr64, +MODULE_PARM_DESC(xeon_b2b_dsd_bar5_addr32, "XEON B2B DSD split-BAR 5 32-bit address"); #ifndef ioread64 -- cgit From c0a88032ef8e6814d4dd84551e5f333c1de639b3 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Mon, 22 Aug 2016 18:51:35 +0200 Subject: ntb_transport: make DMA_OUT_RESOURCE_TO HZ independent schedule_timeout_* takes a timeout in jiffies but the code currently is passing in a constant which makes this timeout HZ dependent, so pass it through msecs_to_jiffies() to fix this up. Signed-off-by: Nicholas Mc Guire Signed-off-by: Jon Mason --- drivers/ntb/ntb_transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 8601c10acf74..4eb8adb34508 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -257,7 +257,7 @@ enum { #define NTB_QP_DEF_NUM_ENTRIES 100 #define NTB_LINK_DOWN_TIMEOUT 10 #define DMA_RETRIES 20 -#define DMA_OUT_RESOURCE_TO 50 +#define DMA_OUT_RESOURCE_TO msecs_to_jiffies(50) static void ntb_transport_rxc_db(unsigned long data); static const struct ntb_ctx_ops ntb_transport_ops; -- cgit From cdc08982a5f334cecc15d802464588115512cc36 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Mon, 22 Aug 2016 18:51:36 +0200 Subject: ntb: make DMA_OUT_RESOURCE_TO HZ independent schedule_timeout_* takes a timeout in jiffies but the code currently is passing in a constant which makes this timeout HZ dependent, so pass it through msecs_to_jiffies() to fix this up. Signed-off-by: Nicholas Mc Guire Acked-by: Dave Jiang Signed-off-by: Jon Mason --- drivers/ntb/test/ntb_perf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c index 6a50f20bf1cd..e065b695200d 100644 --- a/drivers/ntb/test/ntb_perf.c +++ b/drivers/ntb/test/ntb_perf.c @@ -72,7 +72,7 @@ #define MAX_THREADS 32 #define MAX_TEST_SIZE SZ_1M #define MAX_SRCS 32 -#define DMA_OUT_RESOURCE_TO 50 +#define DMA_OUT_RESOURCE_TO msecs_to_jiffies(50) #define DMA_RETRIES 20 #define SZ_4G (1ULL << 32) #define MAX_SEG_ORDER 20 /* no larger than 1M for kmalloc buffer */ -- cgit From 25ea9f2bf5f76082da919f2a91ea8d920932c1da Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Thu, 27 Oct 2016 11:06:44 -0700 Subject: ntb: ntb_hw_intel: init peer_addr in struct intel_ntb_dev The peer_addr member of intel_ntb_dev is not set, therefore when acquiring ntb_peer_db and ntb_peer_spad we only get the offset rather than the actual physical address. Adding fix to correct that. Signed-off-by: Dave Jiang Acked-by: Allen Hubbe Signed-off-by: Jon Mason --- drivers/ntb/hw/intel/ntb_hw_intel.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.c b/drivers/ntb/hw/intel/ntb_hw_intel.c index 1ee61d92c54b..7310a261c858 100644 --- a/drivers/ntb/hw/intel/ntb_hw_intel.c +++ b/drivers/ntb/hw/intel/ntb_hw_intel.c @@ -1755,6 +1755,8 @@ static int xeon_setup_b2b_mw(struct intel_ntb_dev *ndev, XEON_B2B_MIN_SIZE); if (!ndev->peer_mmio) return -EIO; + + ndev->peer_addr = pci_resource_start(pdev, b2b_bar); } return 0; @@ -2019,6 +2021,7 @@ static int intel_ntb_init_pci(struct intel_ntb_dev *ndev, struct pci_dev *pdev) goto err_mmio; } ndev->peer_mmio = ndev->self_mmio; + ndev->peer_addr = pci_resource_start(pdev, 0); return 0; -- cgit From 819baf885953b588b63bef28e5598daf9ed4ddf9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 14 Oct 2016 10:34:18 +0300 Subject: ntb_perf: potential info leak in debugfs This is a static checker warning, not something I'm desperately concerned about. But snprintf() returns the number of bytes that would have been copied if there were space. We really care about the number of bytes that actually were copied so we should use scnprintf() instead. It probably won't overrun, and in that case we may as well just use sprintf() but these sorts of things make static checkers and code reviewers happier. Signed-off-by: Dan Carpenter Acked-by: Dave Jiang Signed-off-by: Jon Mason --- drivers/ntb/test/ntb_perf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c index e065b695200d..e75d4fdc0866 100644 --- a/drivers/ntb/test/ntb_perf.c +++ b/drivers/ntb/test/ntb_perf.c @@ -589,7 +589,7 @@ static ssize_t debugfs_run_read(struct file *filp, char __user *ubuf, return -ENOMEM; if (mutex_is_locked(&perf->run_mutex)) { - out_off = snprintf(buf, 64, "running\n"); + out_off = scnprintf(buf, 64, "running\n"); goto read_from_buf; } @@ -600,14 +600,14 @@ static ssize_t debugfs_run_read(struct file *filp, char __user *ubuf, break; if (pctx->status) { - out_off += snprintf(buf + out_off, 1024 - out_off, + out_off += scnprintf(buf + out_off, 1024 - out_off, "%d: error %d\n", i, pctx->status); continue; } rate = div64_u64(pctx->copied, pctx->diff_us); - out_off += snprintf(buf + out_off, 1024 - out_off, + out_off += scnprintf(buf + out_off, 1024 - out_off, "%d: copied %llu bytes in %llu usecs, %llu MBytes/s\n", i, pctx->copied, pctx->diff_us, rate); } -- cgit From b15efc38626f20f3fc8b831b826b50740d90dab9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 14 Nov 2016 11:14:37 -0200 Subject: gp8psk-fe: add missing MODULE_foo() macros This file was converted to a separate module at commit 7a0786c19d65 ("gp8psk: Fix DVB frontend attach"), because the DVB attach routines require it to work. However, I forgot to copy the MODULE_foo() macros from the original module, causing this warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/media/dvb-frontends/gp8psk-fe.o Reported-by: Stephen Rothwell Fixes: 7a0786c19d65 ("gp8psk: Fix DVB frontend attach") Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Linus Torvalds --- drivers/media/dvb-frontends/gp8psk-fe.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/media/dvb-frontends/gp8psk-fe.c b/drivers/media/dvb-frontends/gp8psk-fe.c index be19afeed7a9..93f59bfea092 100644 --- a/drivers/media/dvb-frontends/gp8psk-fe.c +++ b/drivers/media/dvb-frontends/gp8psk-fe.c @@ -1,5 +1,5 @@ -/* DVB USB compliant Linux driver for the - * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module +/* + * Frontend driver for the GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module * * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com) @@ -8,11 +8,9 @@ * * This module is based off the vp7045 and vp702x modules * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -395,3 +393,8 @@ static struct dvb_frontend_ops gp8psk_fe_ops = { .dishnetwork_send_legacy_command = gp8psk_fe_send_legacy_dish_cmd, .enable_high_lnb_voltage = gp8psk_fe_enable_high_lnb_voltage }; + +MODULE_AUTHOR("Alan Nisota "); +MODULE_DESCRIPTION("Frontend Driver for Genpix DVB-S"); +MODULE_VERSION("1.1"); +MODULE_LICENSE("GPL"); -- cgit From f5c9f9c72395c3291c2e35c905dedae2b98475a4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 14 Nov 2016 09:31:52 -0800 Subject: Revert "printk: make reading the kernel log flush pending lines" This reverts commit bfd8d3f23b51018388be0411ccbc2d56277fe294. It turns out that this flushes things much too aggressiverly, and causes lines to break up when the system logger races with new continuation lines being printed. There's a pending patch to make printk() flushing much more straightforward, but it's too invasive for 4.9, so in the meantime let's just not make the system message logging flush continuation lines. They'll be flushed by the final newline anyway. Suggested-by: Petr Mladek Signed-off-by: Linus Torvalds --- kernel/printk/printk.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index 5028f4fd504a..f7a55e9ff2f7 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -783,8 +783,6 @@ static ssize_t devkmsg_write(struct kiocb *iocb, struct iov_iter *from) return ret; } -static void cont_flush(void); - static ssize_t devkmsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { @@ -800,7 +798,6 @@ static ssize_t devkmsg_read(struct file *file, char __user *buf, if (ret) return ret; raw_spin_lock_irq(&logbuf_lock); - cont_flush(); while (user->seq == log_next_seq) { if (file->f_flags & O_NONBLOCK) { ret = -EAGAIN; @@ -863,7 +860,6 @@ static loff_t devkmsg_llseek(struct file *file, loff_t offset, int whence) return -ESPIPE; raw_spin_lock_irq(&logbuf_lock); - cont_flush(); switch (whence) { case SEEK_SET: /* the first record */ @@ -902,7 +898,6 @@ static unsigned int devkmsg_poll(struct file *file, poll_table *wait) poll_wait(file, &log_wait, wait); raw_spin_lock_irq(&logbuf_lock); - cont_flush(); if (user->seq < log_next_seq) { /* return error when data has vanished underneath us */ if (user->seq < log_first_seq) @@ -1289,7 +1284,6 @@ static int syslog_print(char __user *buf, int size) size_t skip; raw_spin_lock_irq(&logbuf_lock); - cont_flush(); if (syslog_seq < log_first_seq) { /* messages are gone, move to first one */ syslog_seq = log_first_seq; @@ -1349,7 +1343,6 @@ static int syslog_print_all(char __user *buf, int size, bool clear) return -ENOMEM; raw_spin_lock_irq(&logbuf_lock); - cont_flush(); if (buf) { u64 next_seq; u64 seq; @@ -1511,7 +1504,6 @@ int do_syslog(int type, char __user *buf, int len, int source) /* Number of chars in the log buffer */ case SYSLOG_ACTION_SIZE_UNREAD: raw_spin_lock_irq(&logbuf_lock); - cont_flush(); if (syslog_seq < log_first_seq) { /* messages are gone, move to first one */ syslog_seq = log_first_seq; @@ -3028,7 +3020,6 @@ void kmsg_dump(enum kmsg_dump_reason reason) dumper->active = true; raw_spin_lock_irqsave(&logbuf_lock, flags); - cont_flush(); dumper->cur_seq = clear_seq; dumper->cur_idx = clear_idx; dumper->next_seq = log_next_seq; @@ -3119,7 +3110,6 @@ bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog, bool ret; raw_spin_lock_irqsave(&logbuf_lock, flags); - cont_flush(); ret = kmsg_dump_get_line_nolock(dumper, syslog, line, size, len); raw_spin_unlock_irqrestore(&logbuf_lock, flags); @@ -3162,7 +3152,6 @@ bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog, goto out; raw_spin_lock_irqsave(&logbuf_lock, flags); - cont_flush(); if (dumper->cur_seq < log_first_seq) { /* messages are gone, move to first available one */ dumper->cur_seq = log_first_seq; -- cgit From ee2bd216e1fa9fa980e6ac702e5973d157c40c48 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 14 Nov 2016 09:46:08 -0800 Subject: ASoC: lpass-platform: fix uninitialized variable In commit 022d00ee0b55 ("ASoC: lpass-platform: Fix broken pcm data usage") the stream specific information initialization was broken, with the dma channel information not being initialized if there was no alloc_dma_channel() helper function. Before that, the DMA channel number was implicitly initialized to zero because the backing store was allocated with devm_kzalloc(). When the init code was rewritten, that implicit initialization was lost, and gcc rightfully complains about an uninitialized variable being used. Cc: Srinivas Kandagatla Cc: Mark Brown Signed-off-by: Linus Torvalds --- sound/soc/qcom/lpass-platform.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c index 07000f53db44..b392e51de94d 100644 --- a/sound/soc/qcom/lpass-platform.c +++ b/sound/soc/qcom/lpass-platform.c @@ -75,6 +75,7 @@ static int lpass_platform_pcmops_open(struct snd_pcm_substream *substream) data->i2s_port = cpu_dai->driver->id; runtime->private_data = data; + dma_ch = 0; if (v->alloc_dma_channel) dma_ch = v->alloc_dma_channel(drvdata, dir); if (dma_ch < 0) -- cgit From 7020637bdf59589a403e01aca128bef643404317 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sat, 12 Nov 2016 17:20:30 +0000 Subject: ps3_gelic: fix spelling mistake in debug message Trivial fix to spelling mistake "unmached" to "unmatched" in debug message. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/toshiba/ps3_gelic_wireless.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c index 446ea580ad42..928c1dca2673 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c +++ b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c @@ -1694,7 +1694,7 @@ struct gelic_wl_scan_info *gelic_wl_find_best_bss(struct gelic_wl_info *wl) pr_debug("%s: bssid matched\n", __func__); break; } else { - pr_debug("%s: bssid unmached\n", __func__); + pr_debug("%s: bssid unmatched\n", __func__); continue; } } -- cgit From 5d0d4b91bf627f14f95167b738d524156c9d440b Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Sun, 13 Nov 2016 13:01:32 +0800 Subject: Revert "bnx2: Reset device during driver initialization" This reverts commit 3e1be7ad2d38c6bd6aeef96df9bd0a7822f4e51c. When people build bnx2 driver into kernel, it will fail to detect and load firmware because firmware is contained in initramfs and initramfs has not been uncompressed yet during do_initcalls. So revert commit 3e1be7a and work out a new way in the later patch. Signed-off-by: Baoquan He Acked-by: Paul Menzel Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index b3791b394715..c55797291b57 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -6361,6 +6361,10 @@ bnx2_open(struct net_device *dev) struct bnx2 *bp = netdev_priv(dev); int rc; + rc = bnx2_request_firmware(bp); + if (rc < 0) + goto out; + netif_carrier_off(dev); bnx2_disable_int(bp); @@ -6429,6 +6433,7 @@ open_err: bnx2_free_irq(bp); bnx2_free_mem(bp); bnx2_del_napi(bp); + bnx2_release_firmware(bp); goto out; } @@ -8575,12 +8580,6 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_drvdata(pdev, dev); - rc = bnx2_request_firmware(bp); - if (rc < 0) - goto error; - - - bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET); memcpy(dev->dev_addr, bp->mac_addr, ETH_ALEN); dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | @@ -8613,7 +8612,6 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; error: - bnx2_release_firmware(bp); pci_iounmap(pdev, bp->regview); pci_release_regions(pdev); pci_disable_device(pdev); -- cgit From 6df77862f63f389df3b1ad879738e04440d7385d Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Sun, 13 Nov 2016 13:01:33 +0800 Subject: bnx2: Wait for in-flight DMA to complete at probe stage In-flight DMA from 1st kernel could continue going in kdump kernel. New io-page table has been created before bnx2 does reset at open stage. We have to wait for the in-flight DMA to complete to avoid it look up into the newly created io-page table at probe stage. Suggested-by: Michael Chan Signed-off-by: Baoquan He Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2.c | 38 ++++++++++++++++++++++++++++++------ 1 file changed, 32 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index c55797291b57..1f7034d739b0 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -49,6 +49,7 @@ #include #include #include +#include #if IS_ENABLED(CONFIG_CNIC) #define BCM_CNIC 1 @@ -4764,15 +4765,16 @@ bnx2_setup_msix_tbl(struct bnx2 *bp) BNX2_WR(bp, BNX2_PCI_GRC_WINDOW3_ADDR, BNX2_MSIX_PBA_ADDR); } -static int -bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) +static void +bnx2_wait_dma_complete(struct bnx2 *bp) { u32 val; - int i, rc = 0; - u8 old_port; + int i; - /* Wait for the current PCI transaction to complete before - * issuing a reset. */ + /* + * Wait for the current PCI transaction to complete before + * issuing a reset. + */ if ((BNX2_CHIP(bp) == BNX2_CHIP_5706) || (BNX2_CHIP(bp) == BNX2_CHIP_5708)) { BNX2_WR(bp, BNX2_MISC_ENABLE_CLR_BITS, @@ -4796,6 +4798,21 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) } } + return; +} + + +static int +bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) +{ + u32 val; + int i, rc = 0; + u8 old_port; + + /* Wait for the current PCI transaction to complete before + * issuing a reset. */ + bnx2_wait_dma_complete(bp); + /* Wait for the firmware to tell us it is ok to issue a reset. */ bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code, 1, 1); @@ -8580,6 +8597,15 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_drvdata(pdev, dev); + /* + * In-flight DMA from 1st kernel could continue going in kdump kernel. + * New io-page table has been created before bnx2 does reset at open stage. + * We have to wait for the in-flight DMA to complete to avoid it look up + * into the newly created io-page table. + */ + if (is_kdump_kernel()) + bnx2_wait_dma_complete(bp); + memcpy(dev->dev_addr, bp->mac_addr, ETH_ALEN); dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | -- cgit From 5bf35ddfee052d44f39ebaa395d87101c8918405 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Sun, 13 Nov 2016 21:44:37 +0800 Subject: sctp: change sk state only when it has assocs in sctp_shutdown Now when users shutdown a sock with SEND_SHUTDOWN in sctp, even if this sock has no connection (assoc), sk state would be changed to SCTP_SS_CLOSING, which is not as we expect. Besides, after that if users try to listen on this sock, kernel could even panic when it dereference sctp_sk(sk)->bind_hash in sctp_inet_listen, as bind_hash is null when sock has no assoc. This patch is to move sk state change after checking sk assocs is not empty, and also merge these two if() conditions and reduce indent level. Fixes: d46e416c11c8 ("sctp: sctp should change socket state when shutdown is received") Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/sctp/socket.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index faa48ff5cf4b..f23ad913dc7a 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4285,19 +4285,18 @@ static void sctp_shutdown(struct sock *sk, int how) { struct net *net = sock_net(sk); struct sctp_endpoint *ep; - struct sctp_association *asoc; if (!sctp_style(sk, TCP)) return; - if (how & SEND_SHUTDOWN) { + ep = sctp_sk(sk)->ep; + if (how & SEND_SHUTDOWN && !list_empty(&ep->asocs)) { + struct sctp_association *asoc; + sk->sk_state = SCTP_SS_CLOSING; - ep = sctp_sk(sk)->ep; - if (!list_empty(&ep->asocs)) { - asoc = list_entry(ep->asocs.next, - struct sctp_association, asocs); - sctp_primitive_SHUTDOWN(net, asoc, NULL); - } + asoc = list_entry(ep->asocs.next, + struct sctp_association, asocs); + sctp_primitive_SHUTDOWN(net, asoc, NULL); } } -- cgit From c51e424dc79e1428afc4d697cdb6a07f7af70cbf Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sun, 13 Nov 2016 17:50:35 -0800 Subject: net: stmmac: Fix lack of link transition for fixed PHYs Commit 52f95bbfcf72 ("stmmac: fix adjust link call in case of a switch is attached") added some logic to avoid polling the fixed PHY and therefore invoking the adjust_link callback more than once, since this is a fixed PHY and link events won't be generated. This works fine the first time, because we start with phydev->irq = PHY_POLL, so we call adjust_link, then we set phydev->irq = PHY_IGNORE_INTERRUPT and we stop polling the PHY. Now, if we called ndo_close(), which calls both phy_stop() and does an explicit netif_carrier_off(), we end up with a link down. Upon calling ndo_open() again, despite starting the PHY state machine, we have PHY_IGNORE_INTERRUPT set, and we generate no link event at all, so the link is permanently down. Fixes: 52f95bbfcf72 ("stmmac: fix adjust link call in case of a switch is attached") Signed-off-by: Florian Fainelli Acked-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 48e71fad4210..e2c94ec4edd0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -880,6 +880,13 @@ static int stmmac_init_phy(struct net_device *dev) return -ENODEV; } + /* stmmac_adjust_link will change this to PHY_IGNORE_INTERRUPT to avoid + * subsequent PHY polling, make sure we force a link transition if + * we have a UP/DOWN/UP transition + */ + if (phydev->is_pseudo_fixed_link) + phydev->irq = PHY_POLL; + pr_debug("stmmac_init_phy: %s: attached to PHY (UID 0x%x)" " Link = %d\n", dev->name, phydev->phy_id, phydev->link); -- cgit From ac571de999e14b87890cb960ad6f03fbdde6abc8 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Mon, 14 Nov 2016 11:26:32 +0100 Subject: mlxsw: spectrum_router: Flush FIB tables during fini Since commit b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") we reflect to the device the entire FIB table and not only FIBs that point to netdevs created by the driver. During module removal, FIBs of the second type are removed following NETDEV_UNREGISTER events sent. The other FIBs are still present in both the driver's cache and the device's table. Fix this by iterating over all the FIB tables in the device and flush them. There's no need to take locks, as we're the only writer. Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index cbeeddd70c5a..e83072da6272 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -594,8 +594,11 @@ static int mlxsw_sp_vrs_init(struct mlxsw_sp *mlxsw_sp) return 0; } +static void mlxsw_sp_router_fib_flush(struct mlxsw_sp *mlxsw_sp); + static void mlxsw_sp_vrs_fini(struct mlxsw_sp *mlxsw_sp) { + mlxsw_sp_router_fib_flush(mlxsw_sp); kfree(mlxsw_sp->router.vrs); } @@ -1867,18 +1870,18 @@ static int mlxsw_sp_router_set_abort_trap(struct mlxsw_sp *mlxsw_sp) return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ralue), ralue_pl); } -static void mlxsw_sp_router_fib4_abort(struct mlxsw_sp *mlxsw_sp) +static void mlxsw_sp_router_fib_flush(struct mlxsw_sp *mlxsw_sp) { struct mlxsw_resources *resources; struct mlxsw_sp_fib_entry *fib_entry; struct mlxsw_sp_fib_entry *tmp; struct mlxsw_sp_vr *vr; int i; - int err; resources = mlxsw_core_resources_get(mlxsw_sp->core); for (i = 0; i < resources->max_virtual_routers; i++) { vr = &mlxsw_sp->router.vrs[i]; + if (!vr->used) continue; @@ -1894,6 +1897,13 @@ static void mlxsw_sp_router_fib4_abort(struct mlxsw_sp *mlxsw_sp) break; } } +} + +static void mlxsw_sp_router_fib4_abort(struct mlxsw_sp *mlxsw_sp) +{ + int err; + + mlxsw_sp_router_fib_flush(mlxsw_sp); mlxsw_sp->router.aborted = true; err = mlxsw_sp_router_set_abort_trap(mlxsw_sp); if (err) -- cgit From e123386bc31bbf467dc558f2f919de0b8b4ba58c Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 7 Nov 2016 14:32:02 -0500 Subject: tile: handle __ro_after_init like parisc does The tile architecture already marks RO_DATA as read-only in the kernel, so grouping RO_AFTER_INIT_DATA with RO_DATA, as is done by default, means the kernel faults in init when it tries to write to RO_AFTER_INIT_DATA. For now, just arrange that __ro_after_init is handled like __write_once, i.e. __read_mostly. Reviewed-by: Kees Cook Signed-off-by: Chris Metcalf --- arch/tile/include/asm/cache.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/tile/include/asm/cache.h b/arch/tile/include/asm/cache.h index 6160761d5f61..4810e48dbbbf 100644 --- a/arch/tile/include/asm/cache.h +++ b/arch/tile/include/asm/cache.h @@ -61,4 +61,7 @@ */ #define __write_once __read_mostly +/* __ro_after_init is the generic name for the tile arch __write_once. */ +#define __ro_after_init __read_mostly + #endif /* _ASM_TILE_CACHE_H */ -- cgit