From bcfefaf65045e79f3b37dd09163e5dd44285d3e9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 14 Apr 2017 14:21:25 +0100 Subject: sfp: hack: allow marvell 10G phy support to use SFP Allow the Marvell 10G PHY to register with the SFP bus, so that SFP+ cages can work. This bypasses phylink, meaning that socket status is not taken into account for the link state. Also, the tx-disable signal must be commented out in DT for this to work... Signed-off-by: Russell King --- drivers/net/phy/marvell10g.c | 54 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index aebc08beceba..e3e743ab0bb4 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -15,7 +15,9 @@ * If both the fiber and copper ports are connected, the first to gain * link takes priority and the other port is completely locked out. */ +#include #include +#include enum { MV_PCS_BASE_T = 0x0000, @@ -37,6 +39,11 @@ enum { MV_AN_RESULT_SPD_10000 = BIT(15), }; +struct mv3310_priv { + struct device_node *sfp_node; + struct sfp_bus *sfp_bus; +}; + static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg, u16 mask, u16 bits) { @@ -55,17 +62,52 @@ static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg, return ret < 0 ? ret : 1; } +static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) +{ + struct phy_device *phydev = upstream; + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); + + if (sfp_parse_interface(priv->sfp_bus, id) != PHY_INTERFACE_MODE_10GKR) { + dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); + return -EINVAL; + } + return 0; +} + +static const struct sfp_upstream_ops mv3310_sfp_ops = { + .module_insert = mv3310_sfp_insert, +}; + static int mv3310_probe(struct phy_device *phydev) { + struct mv3310_priv *priv; u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN; if (!phydev->is_c45 || (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask) return -ENODEV; + priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + dev_set_drvdata(&phydev->mdio.dev, priv); + + if (phydev->mdio.dev.of_node) + priv->sfp_node = of_parse_phandle(phydev->mdio.dev.of_node, + "sfp", 0); + return 0; } +static void mv3310_remove(struct phy_device *phydev) +{ + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); + + if (priv->sfp_bus) + sfp_unregister_upstream(priv->sfp_bus); +} + /* * Resetting the MV88X3310 causes it to become non-responsive. Avoid * setting the reset bit(s). @@ -77,6 +119,7 @@ static int mv3310_soft_reset(struct phy_device *phydev) static int mv3310_config_init(struct phy_device *phydev) { + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, }; u32 mask; int val; @@ -165,6 +208,14 @@ static int mv3310_config_init(struct phy_device *phydev) phydev->supported &= mask; phydev->advertising &= phydev->supported; + /* Would be nice to do this in the probe function, but unfortunately, + * phylib doesn't have phydev->attached_dev set there. + */ + if (priv->sfp_node && !priv->sfp_bus) + priv->sfp_bus = sfp_register_upstream(priv->sfp_node, + phydev->attached_dev, + phydev, &mv3310_sfp_ops); + return 0; } @@ -348,12 +399,13 @@ static struct phy_driver mv3310_drivers[] = { SUPPORTED_FIBRE | SUPPORTED_10000baseT_Full | SUPPORTED_Backplane, - .probe = mv3310_probe, .soft_reset = mv3310_soft_reset, .config_init = mv3310_config_init, + .probe = mv3310_probe, .config_aneg = mv3310_config_aneg, .aneg_done = mv3310_aneg_done, .read_status = mv3310_read_status, + .remove = mv3310_remove, }, }; -- cgit