From c050bffa76ee3ef12f5781f1e5789afafbc96dba Mon Sep 17 00:00:00 2001 From: "Russell King (Oracle)" Date: Thu, 18 Nov 2021 19:04:02 +0000 Subject: net: stmmac: fill in supported_interfaces Fill in phylink's supported_interfaces bitmap with the PHY interface modes which can be used to talk to the PHY. We indicate that the PHY interface mode passed in platform data is always supported, as this is the initial mode passed into phylink. When there is no PCS specified, we assume that this is the only mode that is supported - indeed, the driver appears not to support dynamic switching of interface types at present. When a xpcs is present, it defines the PHY interface modes that the stmmac driver can support. Request the supported interfaces from the xpcs driver, and pass them to phylink. Tested-by: Wong Vee Khee # Intel EHL Signed-off-by: Russell King (Oracle) --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 3904c06f8eca..df2270f09df1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1204,6 +1204,14 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) if (!fwnode) fwnode = dev_fwnode(priv->device); + /* Set the platform/firmware specified interface mode */ + __set_bit(mode, priv->phylink_config.supported_interfaces); + + /* If we have an xpcs, it defines which PHY interfaces are supported. */ + if (priv->hw->xpcs) + xpcs_get_interfaces(priv->hw->xpcs, + priv->phylink_config.supported_interfaces); + priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100; -- cgit