From c2bac56fcb26cb5f2ea58f522eddfa6cc07789f7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 5 Jun 2019 11:44:55 +0100 Subject: net: phy: marvell10g: allow PHY to probe without firmware Allow the PHY to probe when there is no firmware, but do not allow the link to come up by forcing the PHY state to PHY_HALTED in a similar way to phy_error(). Signed-off-by: Russell King --- drivers/net/phy/marvell10g.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c index 7346c039829b..d42b63356ba6 100644 --- a/drivers/net/phy/marvell10g.c +++ b/drivers/net/phy/marvell10g.c @@ -109,6 +109,7 @@ enum { struct mv3310_priv { u32 firmware_ver; bool rate_match; + bool firmware_failed; struct device *hwmon_dev; char *hwmon_name; @@ -506,7 +507,7 @@ static int mv3310_probe(struct phy_device *phydev) if (ret & MV_PMA_BOOT_FATAL) { dev_warn(&phydev->mdio.dev, "PHY failed to boot firmware, status=%04x\n", ret); - return -ENODEV; + priv->firmware_failed = true; } ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER0); @@ -558,6 +559,19 @@ static int mv3310_resume(struct phy_device *phydev) return mv3310_hwmon_config(phydev, true); } +static int mv3310_start(struct phy_device *phydev) +{ + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); + + if (priv->firmware_failed) { + dev_warn(&phydev->mdio.dev, + "PHY firmware failure: PHY not starting"); + return -EINVAL; + } + + return 0; +} + /* Some PHYs in the Alaska family such as the 88X3310 and the 88E2010 * don't set bit 14 in PMA Extended Abilities (1.11), although they do * support 2.5GBASET and 5GBASET. For these models, we can still read their @@ -912,6 +926,7 @@ static struct phy_driver mv3310_drivers[] = { .probe = mv3310_probe, .suspend = mv3310_suspend, .resume = mv3310_resume, + .start = mv3310_start, .config_aneg = mv3310_config_aneg, .aneg_done = mv3310_aneg_done, .read_status = mv3310_read_status, @@ -926,6 +941,7 @@ static struct phy_driver mv3310_drivers[] = { .probe = mv3310_probe, .suspend = mv3310_suspend, .resume = mv3310_resume, + .start = mv3310_start, .config_init = mv3310_config_init, .config_aneg = mv3310_config_aneg, .aneg_done = mv3310_aneg_done, -- cgit