From c7fcd190859030512a3e3eb448a9c673ae848ff2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 26 Jun 2020 17:24:29 +0100 Subject: net: phylink: simplify phy case for ksettings_set method When we have a PHY attached, an ethtool ksettings_set() call only really needs to call through to the phylib equivalent; phylib will call back to us when the link changes so we can update our state. Therefore, we can bypass most of our ksettings_set() call for this case. Signed-off-by: Russell King --- drivers/net/phy/phylink.c | 104 +++++++++++++++++++++------------------------- 1 file changed, 47 insertions(+), 57 deletions(-) diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c index c2a488a2ab2b..46372854f88b 100644 --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c @@ -1313,13 +1313,33 @@ int phylink_ethtool_ksettings_set(struct phylink *pl, const struct ethtool_link_ksettings *kset) { __ETHTOOL_DECLARE_LINK_MODE_MASK(support); - struct ethtool_link_ksettings our_kset; struct phylink_link_state config; const struct phy_setting *s; - int ret; ASSERT_RTNL(); + if (pl->phydev) { + /* We can rely on phylib for this update; we also do not need + * to update the pl->link_config settings: + * - the configuration returned via ksettings_get() will come + * from phylib whenever a PHY is present. + * - link_config.interface will be updated by the PHY calling + * back via phylink_phy_change() and a subsequent resolve. + * - initial link configuration for PHY mode comes from the + * last phy state updated via phylink_phy_change(). + * - other configuration changes (e.g. pause modes) are + * performed directly via phylib. + * - if in in-band mode with a PHY, the link configuration + * is passed on the link from the PHY, and all of + * link_config.{speed,duplex,an_enabled,pause} are not used. + * - the only possible use would be link_config.advertising + * pause modes when in 1000base-X mode with a PHY, but in + * the presence of a PHY, this should not be changed as that + * should be determined from the media side advertisement. + */ + return phy_ethtool_ksettings_set(pl->phydev, kset); + } + linkmode_copy(support, pl->supported); config = pl->link_config; config.an_enabled = kset->base.autoneg == AUTONEG_ENABLE; @@ -1366,65 +1386,35 @@ int phylink_ethtool_ksettings_set(struct phylink *pl, return -EINVAL; } - if (pl->phydev) { - /* If we have a PHY, we process the kset change via phylib. - * phylib will call our link state function if the PHY - * parameters have changed, which will trigger a resolve - * and update the MAC configuration. - */ - our_kset = *kset; - linkmode_copy(our_kset.link_modes.advertising, - config.advertising); - our_kset.base.speed = config.speed; - our_kset.base.duplex = config.duplex; + /* For a fixed link, this isn't able to change any parameters, + * which just leaves inband mode. + */ + if (phylink_validate(pl, support, &config)) + return -EINVAL; - ret = phy_ethtool_ksettings_set(pl->phydev, &our_kset); - if (ret) - return ret; + /* If autonegotiation is enabled, we must have an advertisement */ + if (config.an_enabled && phylink_is_empty_linkmode(config.advertising)) + return -EINVAL; - mutex_lock(&pl->state_mutex); - /* Save the new configuration */ - linkmode_copy(pl->link_config.advertising, - our_kset.link_modes.advertising); - pl->link_config.interface = config.interface; - pl->link_config.speed = our_kset.base.speed; - pl->link_config.duplex = our_kset.base.duplex; - pl->link_config.an_enabled = our_kset.base.autoneg != - AUTONEG_DISABLE; - mutex_unlock(&pl->state_mutex); - } else { - /* For a fixed link, this isn't able to change any parameters, - * which just leaves inband mode. + mutex_lock(&pl->state_mutex); + linkmode_copy(pl->link_config.advertising, config.advertising); + pl->link_config.interface = config.interface; + pl->link_config.speed = config.speed; + pl->link_config.duplex = config.duplex; + pl->link_config.an_enabled = kset->base.autoneg != + AUTONEG_DISABLE; + + if (pl->cur_link_an_mode == MLO_AN_INBAND && + !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) { + /* If in 802.3z mode, this updates the advertisement. + * + * If we are in SGMII mode without a PHY, there is no + * advertisement; the only thing we have is the pause + * modes which can only come from a PHY. */ - if (phylink_validate(pl, support, &config)) - return -EINVAL; - - /* If autonegotiation is enabled, we must have an advertisement */ - if (config.an_enabled && - phylink_is_empty_linkmode(config.advertising)) - return -EINVAL; - - mutex_lock(&pl->state_mutex); - linkmode_copy(pl->link_config.advertising, config.advertising); - pl->link_config.interface = config.interface; - pl->link_config.speed = config.speed; - pl->link_config.duplex = config.duplex; - pl->link_config.an_enabled = kset->base.autoneg != - AUTONEG_DISABLE; - - if (pl->cur_link_an_mode == MLO_AN_INBAND && - !test_bit(PHYLINK_DISABLE_STOPPED, - &pl->phylink_disable_state)) { - /* If in 802.3z mode, this updates the advertisement. - * - * If we are in SGMII mode without a PHY, there is no - * advertisement; the only thing we have is the pause - * modes which can only come from a PHY. - */ - phylink_pcs_config(pl, true, &pl->link_config); - } - mutex_unlock(&pl->state_mutex); + phylink_pcs_config(pl, true, &pl->link_config); } + mutex_unlock(&pl->state_mutex); return 0; } -- cgit