From d1c14a521067a0b74dd1afc9eb083f4951168625 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Fri, 8 Dec 2017 10:08:41 +0000
Subject: ARM: dts: vf610-zii-dev-rev-c: add support for 88x3310 10Gbit PHY

Add support for the 88x3310 10Gbit PHY on the ZII rev C board.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index de79dcfd32e6..9a348a854c7c 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -77,6 +77,13 @@
 						phy-handle = <&switch0phy4>;
 					};
 
+					port@9 {
+						reg = <9>;
+						label = "lan10g";
+						phy-mode = "xaui";
+						phy-handle = <&switch0phy9>;
+					};
+
 					switch0port10: port@10 {
 						reg = <10>;
 						label = "dsa";
@@ -113,6 +120,15 @@
 						interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 					};
 				};
+				mdio1 {
+					compatible = "marvell,mv88e6xxx-mdio-external";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					switch0phy9: switch0phy@9 {
+						compatible = "ethernet-phy-ieee802.3-c45";
+						reg = <9>;
+					};
+				};
 			};
 		};
 
@@ -313,6 +329,13 @@
 		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
 		gpio-controller;
 		interrupt-controller;
+
+		phy_rst {
+			gpio-hog;
+			gpios = <9 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "10g-rstn";
+		};
 	};
 
 	/*
-- 
cgit