From dd0b38d8eef86308dbbba7557400e4894e55e3c8 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 14 Nov 2016 15:52:43 +0100 Subject: Documentation: convert USB to new format This is a conversion of the USB documentation to the Sphinx format. No content was altered or reformatted. Signed-off-by: Oliver Signed-off-by: Jonathan Corbet --- Documentation/DocBook/Makefile | 2 +- Documentation/DocBook/usb.tmpl | 984 ------------------------------------- Documentation/driver-api/index.rst | 1 + Documentation/driver-api/usb.rst | 748 ++++++++++++++++++++++++++++ 4 files changed, 750 insertions(+), 985 deletions(-) delete mode 100644 Documentation/DocBook/usb.tmpl create mode 100644 Documentation/driver-api/usb.rst diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 263e6577de66..857b772e9da1 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -9,7 +9,7 @@ DOCBOOKS := z8530book.xml \ kernel-hacking.xml kernel-locking.xml deviceiobook.xml \ writing_usb_driver.xml networking.xml \ - kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \ + kernel-api.xml filesystems.xml lsm.xml kgdb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ debugobjects.xml sh.xml regulator.xml \ diff --git a/Documentation/DocBook/usb.tmpl b/Documentation/DocBook/usb.tmpl deleted file mode 100644 index e322691be67e..000000000000 --- a/Documentation/DocBook/usb.tmpl +++ /dev/null @@ -1,984 +0,0 @@ - - - - - - The Linux-USB Host Side API - - - - This documentation is free software; you can redistribute - it and/or modify it under the terms of the GNU General Public - License as published by the Free Software Foundation; either - version 2 of the License, or (at your option) any later - version. - - - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - See the GNU General Public License for more details. - - - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, - MA 02111-1307 USA - - - - For more details see the file COPYING in the source - distribution of Linux. - - - - - - - - Introduction to USB on Linux - - A Universal Serial Bus (USB) is used to connect a host, - such as a PC or workstation, to a number of peripheral - devices. USB uses a tree structure, with the host as the - root (the system's master), hubs as interior nodes, and - peripherals as leaves (and slaves). - Modern PCs support several such trees of USB devices, usually - a few USB 3.0 (5 GBit/s) or USB 3.1 (10 GBit/s) and some legacy - USB 2.0 (480 MBit/s) busses just in case. - - - That master/slave asymmetry was designed-in for a number of - reasons, one being ease of use. It is not physically possible to - mistake upstream and downstream or it does not matter with a type C - plug - (or they are built into the peripheral). - Also, the host software doesn't need to deal with distributed - auto-configuration since the pre-designated master node manages all that. - - - Kernel developers added USB support to Linux early in the 2.2 kernel - series and have been developing it further since then. Besides support - for each new generation of USB, various host controllers gained support, - new drivers for peripherals have been added and advanced features for latency - measurement and improved power management introduced. - - - Linux can run inside USB devices as well as on - the hosts that control the devices. - But USB device drivers running inside those peripherals - don't do the same things as the ones running inside hosts, - so they've been given a different name: - gadget drivers. - This document does not cover gadget drivers. - - - - - - USB Host-Side API Model - - Host-side drivers for USB devices talk to the "usbcore" APIs. - There are two. One is intended for - general-purpose drivers (exposed through - driver frameworks), and the other is for drivers that are - part of the core. - Such core drivers include the hub driver - (which manages trees of USB devices) and several different kinds - of host controller drivers, - which control individual busses. - - - The device model seen by USB drivers is relatively complex. - - - - - USB supports four kinds of data transfers - (control, bulk, interrupt, and isochronous). Two of them (control - and bulk) use bandwidth as it's available, - while the other two (interrupt and isochronous) - are scheduled to provide guaranteed bandwidth. - - - The device description model includes one or more - "configurations" per device, only one of which is active at a time. - Devices are supposed to be capable of operating at lower than their top - speeds and may provide a BOS descriptor showing the lowest speed they - remain fully operational at. - - - From USB 3.0 on configurations have one or more "functions", which - provide a common functionality and are grouped together for purposes - of power management. - - - Configurations or functions have one or more "interfaces", each - of which may have "alternate settings". Interfaces may be - standardized by USB "Class" specifications, or may be specific to - a vendor or device. - - USB device drivers actually bind to interfaces, not devices. - Think of them as "interface drivers", though you - may not see many devices where the distinction is important. - Most USB devices are simple, with only one configuration, - one function, one interface, and one alternate setting. - - - Interfaces have one or more "endpoints", each of - which supports one type and direction of data transfer such as - "bulk out" or "interrupt in". The entire configuration may have - up to sixteen endpoints in each direction, allocated as needed - among all the interfaces. - - - Data transfer on USB is packetized; each endpoint - has a maximum packet size. - Drivers must often be aware of conventions such as flagging the end - of bulk transfers using "short" (including zero length) packets. - - - The Linux USB API supports synchronous calls for - control and bulk messages. - It also supports asynchronous calls for all kinds of data transfer, - using request structures called "URBs" (USB Request Blocks). - - - - - Accordingly, the USB Core API exposed to device drivers - covers quite a lot of territory. You'll probably need to consult - the USB 3.0 specification, available online from www.usb.org at - no cost, as well as class or device specifications. - - - The only host-side drivers that actually touch hardware - (reading/writing registers, handling IRQs, and so on) are the HCDs. - In theory, all HCDs provide the same functionality through the same - API. In practice, that's becoming mostly true, - but there are still differences that crop up especially with - fault handling on the less common controllers. - Different controllers don't necessarily report - the same aspects of failures, and recovery from faults (including - software-induced ones like unlinking an URB) isn't yet fully - consistent. - Device driver authors should make a point of doing disconnect - testing (while the device is active) with each different host - controller driver, to make sure drivers don't have bugs of - their own as well as to make sure they aren't relying on some - HCD-specific behavior. - - - - -USB-Standard Types - - In <linux/usb/ch9.h> you will find - the USB data types defined in chapter 9 of the USB specification. - These data types are used throughout USB, and in APIs including - this host side API, gadget APIs, and usbfs. - - -!Iinclude/linux/usb/ch9.h - - - -Host-Side Data Types and Macros - - The host side API exposes several layers to drivers, some of - which are more necessary than others. - These support lifecycle models for host side drivers - and devices, and support passing buffers through usbcore to - some HCD that performs the I/O for the device driver. - - - -!Iinclude/linux/usb.h - - - - USB Core APIs - - There are two basic I/O models in the USB API. - The most elemental one is asynchronous: drivers submit requests - in the form of an URB, and the URB's completion callback - handles the next step. - All USB transfer types support that model, although there - are special cases for control URBs (which always have setup - and status stages, but may not have a data stage) and - isochronous URBs (which allow large packets and include - per-packet fault reports). - Built on top of that is synchronous API support, where a - driver calls a routine that allocates one or more URBs, - submits them, and waits until they complete. - There are synchronous wrappers for single-buffer control - and bulk transfers (which are awkward to use in some - driver disconnect scenarios), and for scatterlist based - streaming i/o (bulk or interrupt). - - - USB drivers need to provide buffers that can be - used for DMA, although they don't necessarily need to - provide the DMA mapping themselves. - There are APIs to use used when allocating DMA buffers, - which can prevent use of bounce buffers on some systems. - In some cases, drivers may be able to rely on 64bit DMA - to eliminate another kind of bounce buffer. - - -!Edrivers/usb/core/urb.c -!Edrivers/usb/core/message.c -!Edrivers/usb/core/file.c -!Edrivers/usb/core/driver.c -!Edrivers/usb/core/usb.c -!Edrivers/usb/core/hub.c - - - Host Controller APIs - - These APIs are only for use by host controller drivers, - most of which implement standard register interfaces such as - XHCI, EHCI, OHCI, or UHCI. - UHCI was one of the first interfaces, designed by Intel and - also used by VIA; it doesn't do much in hardware. - OHCI was designed later, to have the hardware do more work - (bigger transfers, tracking protocol state, and so on). - EHCI was designed with USB 2.0; its design has features that - resemble OHCI (hardware does much more work) as well as - UHCI (some parts of ISO support, TD list processing). - XHCI was designed with USB 3.0. It continues to shift support - for functionality into hardware. - - - There are host controllers other than the "big three", - although most PCI based controllers (and a few non-PCI based - ones) use one of those interfaces. - Not all host controllers use DMA; some use PIO, and there - is also a simulator and a virtual host controller to pipe - USB over the network. - - - The same basic APIs are available to drivers for all - those controllers. - For historical reasons they are in two layers: - struct usb_bus is a rather thin - layer that became available in the 2.2 kernels, while - struct usb_hcd is a more featureful - layer that - lets HCDs share common code, to shrink driver size - and significantly reduce hcd-specific behaviors. - - -!Edrivers/usb/core/hcd.c -!Edrivers/usb/core/hcd-pci.c -!Idrivers/usb/core/buffer.c - - - - The USB Filesystem (usbfs) - - This chapter presents the Linux usbfs. - You may prefer to avoid writing new kernel code for your - USB driver; that's the problem that usbfs set out to solve. - User mode device drivers are usually packaged as applications - or libraries, and may use usbfs through some programming library - that wraps it. Such libraries include - libusb - for C/C++, and - jUSB for Java. - - - Unfinished - This particular documentation is incomplete, - especially with respect to the asynchronous mode. - As of kernel 2.5.66 the code and this (new) documentation - need to be cross-reviewed. - - - - Configure usbfs into Linux kernels by enabling the - USB filesystem option (CONFIG_USB_DEVICEFS), - and you get basic support for user mode USB device drivers. - Until relatively recently it was often (confusingly) called - usbdevfs although it wasn't solving what - devfs was. - Every USB device will appear in usbfs, regardless of whether or - not it has a kernel driver. - - - - What files are in "usbfs"? - - Conventionally mounted at - /proc/bus/usb, usbfs - features include: - - /proc/bus/usb/devices - ... a text file - showing each of the USB devices on known to the kernel, - and their configuration descriptors. - You can also poll() this to learn about new devices. - - /proc/bus/usb/BBB/DDD - ... magic files - exposing the each device's configuration descriptors, and - supporting a series of ioctls for making device requests, - including I/O to devices. (Purely for access by programs.) - - - - - Each bus is given a number (BBB) based on when it was - enumerated; within each bus, each device is given a similar - number (DDD). - Those BBB/DDD paths are not "stable" identifiers; - expect them to change even if you always leave the devices - plugged in to the same hub port. - Don't even think of saving these in application - configuration files. - Stable identifiers are available, for user mode applications - that want to use them. HID and networking devices expose - these stable IDs, so that for example you can be sure that - you told the right UPS to power down its second server. - "usbfs" doesn't (yet) expose those IDs. - - - - - - Mounting and Access Control - - There are a number of mount options for usbfs, which will - be of most interest to you if you need to override the default - access control policy. - That policy is that only root may read or write device files - (/proc/bus/BBB/DDD) although anyone may read - the devices - or drivers files. - I/O requests to the device also need the CAP_SYS_RAWIO capability, - - - The significance of that is that by default, all user mode - device drivers need super-user privileges. - You can change modes or ownership in a driver setup - when the device hotplugs, or maye just start the - driver right then, as a privileged server (or some activity - within one). - That's the most secure approach for multi-user systems, - but for single user systems ("trusted" by that user) - it's more convenient just to grant everyone all access - (using the devmode=0666 option) - so the driver can start whenever it's needed. - - - The mount options for usbfs, usable in /etc/fstab or - in command line invocations of mount, are: - - - - busgid=NNNNN - Controls the GID used for the - /proc/bus/usb/BBB - directories. (Default: 0) - busmode=MMM - Controls the file mode used for the - /proc/bus/usb/BBB - directories. (Default: 0555) - - busuid=NNNNN - Controls the UID used for the - /proc/bus/usb/BBB - directories. (Default: 0) - - devgid=NNNNN - Controls the GID used for the - /proc/bus/usb/BBB/DDD - files. (Default: 0) - devmode=MMM - Controls the file mode used for the - /proc/bus/usb/BBB/DDD - files. (Default: 0644) - devuid=NNNNN - Controls the UID used for the - /proc/bus/usb/BBB/DDD - files. (Default: 0) - - listgid=NNNNN - Controls the GID used for the - /proc/bus/usb/devices and drivers files. - (Default: 0) - listmode=MMM - Controls the file mode used for the - /proc/bus/usb/devices and drivers files. - (Default: 0444) - listuid=NNNNN - Controls the UID used for the - /proc/bus/usb/devices and drivers files. - (Default: 0) - - - - - Note that many Linux distributions hard-wire the mount options - for usbfs in their init scripts, such as - /etc/rc.d/rc.sysinit, - rather than making it easy to set this per-system - policy in /etc/fstab. - - - - - - /proc/bus/usb/devices - - This file is handy for status viewing tools in user - mode, which can scan the text format and ignore most of it. - More detailed device status (including class and vendor - status) is available from device-specific files. - For information about the current format of this file, - see the - Documentation/usb/proc_usb_info.txt - file in your Linux kernel sources. - - - This file, in combination with the poll() system call, can - also be used to detect when devices are added or removed: -int fd; -struct pollfd pfd; - -fd = open("/proc/bus/usb/devices", O_RDONLY); -pfd = { fd, POLLIN, 0 }; -for (;;) { - /* The first time through, this call will return immediately. */ - poll(&pfd, 1, -1); - - /* To see what's changed, compare the file's previous and current - contents or scan the filesystem. (Scanning is more precise.) */ -} - Note that this behavior is intended to be used for informational - and debug purposes. It would be more appropriate to use programs - such as udev or HAL to initialize a device or start a user-mode - helper program, for instance. - - - - - /proc/bus/usb/BBB/DDD - - Use these files in one of these basic ways: - - - They can be read, - producing first the device descriptor - (18 bytes) and then the descriptors for the current configuration. - See the USB 2.0 spec for details about those binary data formats. - You'll need to convert most multibyte values from little endian - format to your native host byte order, although a few of the - fields in the device descriptor (both of the BCD-encoded fields, - and the vendor and product IDs) will be byteswapped for you. - Note that configuration descriptors include descriptors for - interfaces, altsettings, endpoints, and maybe additional - class descriptors. - - - Perform USB operations using - ioctl() requests to make endpoint I/O - requests (synchronously or asynchronously) or manage - the device. - These requests need the CAP_SYS_RAWIO capability, - as well as filesystem access permissions. - Only one ioctl request can be made on one of these - device files at a time. - This means that if you are synchronously reading an endpoint - from one thread, you won't be able to write to a different - endpoint from another thread until the read completes. - This works for half duplex protocols, - but otherwise you'd use asynchronous i/o requests. - - - - - - - Life Cycle of User Mode Drivers - - Such a driver first needs to find a device file - for a device it knows how to handle. - Maybe it was told about it because a - /sbin/hotplug event handling agent - chose that driver to handle the new device. - Or maybe it's an application that scans all the - /proc/bus/usb device files, and ignores most devices. - In either case, it should read() all - the descriptors from the device file, - and check them against what it knows how to handle. - It might just reject everything except a particular - vendor and product ID, or need a more complex policy. - - - Never assume there will only be one such device - on the system at a time! - If your code can't handle more than one device at - a time, at least detect when there's more than one, and - have your users choose which device to use. - - - Once your user mode driver knows what device to use, - it interacts with it in either of two styles. - The simple style is to make only control requests; some - devices don't need more complex interactions than those. - (An example might be software using vendor-specific control - requests for some initialization or configuration tasks, - with a kernel driver for the rest.) - - - More likely, you need a more complex style driver: - one using non-control endpoints, reading or writing data - and claiming exclusive use of an interface. - Bulk transfers are easiest to use, - but only their sibling interrupt transfers - work with low speed devices. - Both interrupt and isochronous transfers - offer service guarantees because their bandwidth is reserved. - Such "periodic" transfers are awkward to use through usbfs, - unless you're using the asynchronous calls. However, interrupt - transfers can also be used in a synchronous "one shot" style. - - - Your user-mode driver should never need to worry - about cleaning up request state when the device is - disconnected, although it should close its open file - descriptors as soon as it starts seeing the ENODEV - errors. - - - - - The ioctl() Requests - - To use these ioctls, you need to include the following - headers in your userspace program: -#include <linux/usb.h> -#include <linux/usbdevice_fs.h> -#include <asm/byteorder.h> - The standard USB device model requests, from "Chapter 9" of - the USB 2.0 specification, are automatically included from - the <linux/usb/ch9.h> header. - - - Unless noted otherwise, the ioctl requests - described here will - update the modification time on the usbfs file to which - they are applied (unless they fail). - A return of zero indicates success; otherwise, a - standard USB error code is returned. (These are - documented in - Documentation/usb/error-codes.txt - in your kernel sources.) - - - Each of these files multiplexes access to several - I/O streams, one per endpoint. - Each device has one control endpoint (endpoint zero) - which supports a limited RPC style RPC access. - Devices are configured - by hub_wq (in the kernel) setting a device-wide - configuration that affects things - like power consumption and basic functionality. - The endpoints are part of USB interfaces, - which may have altsettings - affecting things like which endpoints are available. - Many devices only have a single configuration and interface, - so drivers for them will ignore configurations and altsettings. - - - - - Management/Status Requests - - A number of usbfs requests don't deal very directly - with device I/O. - They mostly relate to device management and status. - These are all synchronous requests. - - - - - USBDEVFS_CLAIMINTERFACE - This is used to force usbfs to - claim a specific interface, - which has not previously been claimed by usbfs or any other - kernel driver. - The ioctl parameter is an integer holding the number of - the interface (bInterfaceNumber from descriptor). - - Note that if your driver doesn't claim an interface - before trying to use one of its endpoints, and no - other driver has bound to it, then the interface is - automatically claimed by usbfs. - - This claim will be released by a RELEASEINTERFACE ioctl, - or by closing the file descriptor. - File modification time is not updated by this request. - - - USBDEVFS_CONNECTINFO - Says whether the device is lowspeed. - The ioctl parameter points to a structure like this: -struct usbdevfs_connectinfo { - unsigned int devnum; - unsigned char slow; -}; - File modification time is not updated by this request. - - You can't tell whether a "not slow" - device is connected at high speed (480 MBit/sec) - or just full speed (12 MBit/sec). - You should know the devnum value already, - it's the DDD value of the device file name. - - - USBDEVFS_GETDRIVER - Returns the name of the kernel driver - bound to a given interface (a string). Parameter - is a pointer to this structure, which is modified: -struct usbdevfs_getdriver { - unsigned int interface; - char driver[USBDEVFS_MAXDRIVERNAME + 1]; -}; - File modification time is not updated by this request. - - - USBDEVFS_IOCTL - Passes a request from userspace through - to a kernel driver that has an ioctl entry in the - struct usb_driver it registered. -struct usbdevfs_ioctl { - int ifno; - int ioctl_code; - void *data; -}; - -/* user mode call looks like this. - * 'request' becomes the driver->ioctl() 'code' parameter. - * the size of 'param' is encoded in 'request', and that data - * is copied to or from the driver->ioctl() 'buf' parameter. - */ -static int -usbdev_ioctl (int fd, int ifno, unsigned request, void *param) -{ - struct usbdevfs_ioctl wrapper; - - wrapper.ifno = ifno; - wrapper.ioctl_code = request; - wrapper.data = param; - - return ioctl (fd, USBDEVFS_IOCTL, &wrapper); -} - File modification time is not updated by this request. - - This request lets kernel drivers talk to user mode code - through filesystem operations even when they don't create - a character or block special device. - It's also been used to do things like ask devices what - device special file should be used. - Two pre-defined ioctls are used - to disconnect and reconnect kernel drivers, so - that user mode code can completely manage binding - and configuration of devices. - - - USBDEVFS_RELEASEINTERFACE - This is used to release the claim usbfs - made on interface, either implicitly or because of a - USBDEVFS_CLAIMINTERFACE call, before the file - descriptor is closed. - The ioctl parameter is an integer holding the number of - the interface (bInterfaceNumber from descriptor); - File modification time is not updated by this request. - - No security check is made to ensure - that the task which made the claim is the one - which is releasing it. - This means that user mode driver may interfere - other ones. - - - USBDEVFS_RESETEP - Resets the data toggle value for an endpoint - (bulk or interrupt) to DATA0. - The ioctl parameter is an integer endpoint number - (1 to 15, as identified in the endpoint descriptor), - with USB_DIR_IN added if the device's endpoint sends - data to the host. - - Avoid using this request. - It should probably be removed. - Using it typically means the device and driver will lose - toggle synchronization. If you really lost synchronization, - you likely need to completely handshake with the device, - using a request like CLEAR_HALT - or SET_INTERFACE. - - - USBDEVFS_DROP_PRIVILEGES - This is used to relinquish the ability - to do certain operations which are considered to be - privileged on a usbfs file descriptor. - This includes claiming arbitrary interfaces, resetting - a device on which there are currently claimed interfaces - from other users, and issuing USBDEVFS_IOCTL calls. - The ioctl parameter is a 32 bit mask of interfaces - the user is allowed to claim on this file descriptor. - You may issue this ioctl more than one time to narrow - said mask. - - - - - - - Synchronous I/O Support - - Synchronous requests involve the kernel blocking - until the user mode request completes, either by - finishing successfully or by reporting an error. - In most cases this is the simplest way to use usbfs, - although as noted above it does prevent performing I/O - to more than one endpoint at a time. - - - - - USBDEVFS_BULK - Issues a bulk read or write request to the - device. - The ioctl parameter is a pointer to this structure: -struct usbdevfs_bulktransfer { - unsigned int ep; - unsigned int len; - unsigned int timeout; /* in milliseconds */ - void *data; -}; - The "ep" value identifies a - bulk endpoint number (1 to 15, as identified in an endpoint - descriptor), - masked with USB_DIR_IN when referring to an endpoint which - sends data to the host from the device. - The length of the data buffer is identified by "len"; - Recent kernels support requests up to about 128KBytes. - FIXME say how read length is returned, - and how short reads are handled.. - - - USBDEVFS_CLEAR_HALT - Clears endpoint halt (stall) and - resets the endpoint toggle. This is only - meaningful for bulk or interrupt endpoints. - The ioctl parameter is an integer endpoint number - (1 to 15, as identified in an endpoint descriptor), - masked with USB_DIR_IN when referring to an endpoint which - sends data to the host from the device. - - Use this on bulk or interrupt endpoints which have - stalled, returning -EPIPE status - to a data transfer request. - Do not issue the control request directly, since - that could invalidate the host's record of the - data toggle. - - - USBDEVFS_CONTROL - Issues a control request to the device. - The ioctl parameter points to a structure like this: -struct usbdevfs_ctrltransfer { - __u8 bRequestType; - __u8 bRequest; - __u16 wValue; - __u16 wIndex; - __u16 wLength; - __u32 timeout; /* in milliseconds */ - void *data; -}; - - The first eight bytes of this structure are the contents - of the SETUP packet to be sent to the device; see the - USB 2.0 specification for details. - The bRequestType value is composed by combining a - USB_TYPE_* value, a USB_DIR_* value, and a - USB_RECIP_* value (from - <linux/usb.h>). - If wLength is nonzero, it describes the length of the data - buffer, which is either written to the device - (USB_DIR_OUT) or read from the device (USB_DIR_IN). - - At this writing, you can't transfer more than 4 KBytes - of data to or from a device; usbfs has a limit, and - some host controller drivers have a limit. - (That's not usually a problem.) - Also there's no way to say it's - not OK to get a short read back from the device. - - - USBDEVFS_RESET - Does a USB level device reset. - The ioctl parameter is ignored. - After the reset, this rebinds all device interfaces. - File modification time is not updated by this request. - - Avoid using this call - until some usbcore bugs get fixed, - since it does not fully synchronize device, interface, - and driver (not just usbfs) state. - - - USBDEVFS_SETINTERFACE - Sets the alternate setting for an - interface. The ioctl parameter is a pointer to a - structure like this: -struct usbdevfs_setinterface { - unsigned int interface; - unsigned int altsetting; -}; - File modification time is not updated by this request. - - Those struct members are from some interface descriptor - applying to the current configuration. - The interface number is the bInterfaceNumber value, and - the altsetting number is the bAlternateSetting value. - (This resets each endpoint in the interface.) - - - USBDEVFS_SETCONFIGURATION - Issues the - usb_set_configuration call - for the device. - The parameter is an integer holding the number of - a configuration (bConfigurationValue from descriptor). - File modification time is not updated by this request. - - Avoid using this call - until some usbcore bugs get fixed, - since it does not fully synchronize device, interface, - and driver (not just usbfs) state. - - - - - - - Asynchronous I/O Support - - As mentioned above, there are situations where it may be - important to initiate concurrent operations from user mode code. - This is particularly important for periodic transfers - (interrupt and isochronous), but it can be used for other - kinds of USB requests too. - In such cases, the asynchronous requests described here - are essential. Rather than submitting one request and having - the kernel block until it completes, the blocking is separate. - - - These requests are packaged into a structure that - resembles the URB used by kernel device drivers. - (No POSIX Async I/O support here, sorry.) - It identifies the endpoint type (USBDEVFS_URB_TYPE_*), - endpoint (number, masked with USB_DIR_IN as appropriate), - buffer and length, and a user "context" value serving to - uniquely identify each request. - (It's usually a pointer to per-request data.) - Flags can modify requests (not as many as supported for - kernel drivers). - - - Each request can specify a realtime signal number - (between SIGRTMIN and SIGRTMAX, inclusive) to request a - signal be sent when the request completes. - - - When usbfs returns these urbs, the status value - is updated, and the buffer may have been modified. - Except for isochronous transfers, the actual_length is - updated to say how many bytes were transferred; if the - USBDEVFS_URB_DISABLE_SPD flag is set - ("short packets are not OK"), if fewer bytes were read - than were requested then you get an error report. - - -struct usbdevfs_iso_packet_desc { - unsigned int length; - unsigned int actual_length; - unsigned int status; -}; - -struct usbdevfs_urb { - unsigned char type; - unsigned char endpoint; - int status; - unsigned int flags; - void *buffer; - int buffer_length; - int actual_length; - int start_frame; - int number_of_packets; - int error_count; - unsigned int signr; - void *usercontext; - struct usbdevfs_iso_packet_desc iso_frame_desc[]; -}; - - For these asynchronous requests, the file modification - time reflects when the request was initiated. - This contrasts with their use with the synchronous requests, - where it reflects when requests complete. - - - - - USBDEVFS_DISCARDURB - - TBS - File modification time is not updated by this request. - - - - USBDEVFS_DISCSIGNAL - - TBS - File modification time is not updated by this request. - - - - USBDEVFS_REAPURB - - TBS - File modification time is not updated by this request. - - - - USBDEVFS_REAPURBNDELAY - - TBS - File modification time is not updated by this request. - - - - USBDEVFS_SUBMITURB - - TBS - - - - - - - - - - - - diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index e18135b513e2..743828ead665 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -20,6 +20,7 @@ available subsections can be seen below. sound frame-buffer input + usb spi i2c hsi diff --git a/Documentation/driver-api/usb.rst b/Documentation/driver-api/usb.rst new file mode 100644 index 000000000000..851cc40b66b5 --- /dev/null +++ b/Documentation/driver-api/usb.rst @@ -0,0 +1,748 @@ +=========================== +The Linux-USB Host Side API +=========================== + +Introduction to USB on Linux +============================ + +A Universal Serial Bus (USB) is used to connect a host, such as a PC or +workstation, to a number of peripheral devices. USB uses a tree +structure, with the host as the root (the system's master), hubs as +interior nodes, and peripherals as leaves (and slaves). Modern PCs +support several such trees of USB devices, usually +a few USB 3.0 (5 GBit/s) or USB 3.1 (10 GBit/s) and some legacy +USB 2.0 (480 MBit/s) busses just in case. + +That master/slave asymmetry was designed-in for a number of reasons, one +being ease of use. It is not physically possible to mistake upstream and +downstream or it does not matter with a type C plug (or they are built into the +peripheral). Also, the host software doesn't need to deal with +distributed auto-configuration since the pre-designated master node +manages all that. + +Kernel developers added USB support to Linux early in the 2.2 kernel +series and have been developing it further since then. Besides support +for each new generation of USB, various host controllers gained support, +new drivers for peripherals have been added and advanced features for latency +measurement and improved power management introduced. + +Linux can run inside USB devices as well as on the hosts that control +the devices. But USB device drivers running inside those peripherals +don't do the same things as the ones running inside hosts, so they've +been given a different name: *gadget drivers*. This document does not +cover gadget drivers. + +USB Host-Side API Model +======================= + +Host-side drivers for USB devices talk to the "usbcore" APIs. There are +two. One is intended for *general-purpose* drivers (exposed through +driver frameworks), and the other is for drivers that are *part of the +core*. Such core drivers include the *hub* driver (which manages trees +of USB devices) and several different kinds of *host controller +drivers*, which control individual busses. + +The device model seen by USB drivers is relatively complex. + +- USB supports four kinds of data transfers (control, bulk, interrupt, + and isochronous). Two of them (control and bulk) use bandwidth as + it's available, while the other two (interrupt and isochronous) are + scheduled to provide guaranteed bandwidth. + +- The device description model includes one or more "configurations" + per device, only one of which is active at a time. Devices are supposed + to be capable of operating at lower than their top + speeds and may provide a BOS descriptor showing the lowest speed they + remain fully operational at. + +- From USB 3.0 on configurations have one or more "functions", which + provide a common functionality and are grouped together for purposes + of power management. + +- Configurations or functions have one or more "interfaces", each of which may have + "alternate settings". Interfaces may be standardized by USB "Class" + specifications, or may be specific to a vendor or device. + + USB device drivers actually bind to interfaces, not devices. Think of + them as "interface drivers", though you may not see many devices + where the distinction is important. *Most USB devices are simple, + with only one function, one configuration, one interface, and one alternate + setting.* + +- Interfaces have one or more "endpoints", each of which supports one + type and direction of data transfer such as "bulk out" or "interrupt + in". The entire configuration may have up to sixteen endpoints in + each direction, allocated as needed among all the interfaces. + +- Data transfer on USB is packetized; each endpoint has a maximum + packet size. Drivers must often be aware of conventions such as + flagging the end of bulk transfers using "short" (including zero + length) packets. + +- The Linux USB API supports synchronous calls for control and bulk + messages. It also supports asynchronous calls for all kinds of data + transfer, using request structures called "URBs" (USB Request + Blocks). + +Accordingly, the USB Core API exposed to device drivers covers quite a +lot of territory. You'll probably need to consult the USB 3.0 +specification, available online from www.usb.org at no cost, as well as +class or device specifications. + +The only host-side drivers that actually touch hardware (reading/writing +registers, handling IRQs, and so on) are the HCDs. In theory, all HCDs +provide the same functionality through the same API. In practice, that's +becoming more true, but there are still differences +that crop up especially with fault handling on the less common controllers. +Different controllers don't +necessarily report the same aspects of failures, and recovery from +faults (including software-induced ones like unlinking an URB) isn't yet +fully consistent. Device driver authors should make a point of doing +disconnect testing (while the device is active) with each different host +controller driver, to make sure drivers don't have bugs of their own as +well as to make sure they aren't relying on some HCD-specific behavior. + +USB-Standard Types +================== + +In ```` you will find the USB data types defined in +chapter 9 of the USB specification. These data types are used throughout +USB, and in APIs including this host side API, gadget APIs, and usbfs. + +.. kernel-doc:: include/linux/usb/ch9.h + :internal: + +Host-Side Data Types and Macros +=============================== + +The host side API exposes several layers to drivers, some of which are +more necessary than others. These support lifecycle models for host side +drivers and devices, and support passing buffers through usbcore to some +HCD that performs the I/O for the device driver. + +.. kernel-doc:: include/linux/usb.h + :internal: + +USB Core APIs +============= + +There are two basic I/O models in the USB API. The most elemental one is +asynchronous: drivers submit requests in the form of an URB, and the +URB's completion callback handles the next step. All USB transfer types +support that model, although there are special cases for control URBs +(which always have setup and status stages, but may not have a data +stage) and isochronous URBs (which allow large packets and include +per-packet fault reports). Built on top of that is synchronous API +support, where a driver calls a routine that allocates one or more URBs, +submits them, and waits until they complete. There are synchronous +wrappers for single-buffer control and bulk transfers (which are awkward +to use in some driver disconnect scenarios), and for scatterlist based +streaming i/o (bulk or interrupt). + +USB drivers need to provide buffers that can be used for DMA, although +they don't necessarily need to provide the DMA mapping themselves. There +are APIs to use used when allocating DMA buffers, which can prevent use +of bounce buffers on some systems. In some cases, drivers may be able to +rely on 64bit DMA to eliminate another kind of bounce buffer. + +.. kernel-doc:: drivers/usb/core/urb.c + :export: + +.. kernel-doc:: drivers/usb/core/message.c + :export: + +.. kernel-doc:: drivers/usb/core/file.c + :export: + +.. kernel-doc:: drivers/usb/core/driver.c + :export: + +.. kernel-doc:: drivers/usb/core/usb.c + :export: + +.. kernel-doc:: drivers/usb/core/hub.c + :export: + +Host Controller APIs +==================== + +These APIs are only for use by host controller drivers, most of which +implement standard register interfaces such as XHCI, EHCI, OHCI, or UHCI. UHCI +was one of the first interfaces, designed by Intel and also used by VIA; +it doesn't do much in hardware. OHCI was designed later, to have the +hardware do more work (bigger transfers, tracking protocol state, and so +on). EHCI was designed with USB 2.0; its design has features that +resemble OHCI (hardware does much more work) as well as UHCI (some parts +of ISO support, TD list processing). XHCI was designed with USB 3.0. It +continues to shift support for functionality into hardware. + +There are host controllers other than the "big three", although most PCI +based controllers (and a few non-PCI based ones) use one of those +interfaces. Not all host controllers use DMA; some use PIO, and there is +also a simulator and a virtual host controller to pipe USB over the network. + +The same basic APIs are available to drivers for all those controllers. +For historical reasons they are in two layers: :c:type:`struct +usb_bus ` is a rather thin layer that became available +in the 2.2 kernels, while :c:type:`struct usb_hcd ` +is a more featureful layer +that lets HCDs share common code, to shrink driver size and +significantly reduce hcd-specific behaviors. + +.. kernel-doc:: drivers/usb/core/hcd.c + :export: + +.. kernel-doc:: drivers/usb/core/hcd-pci.c + :export: + +.. kernel-doc:: drivers/usb/core/buffer.c + :internal: + +The USB Filesystem (usbfs) +========================== + +This chapter presents the Linux *usbfs*. You may prefer to avoid writing +new kernel code for your USB driver; that's the problem that usbfs set +out to solve. User mode device drivers are usually packaged as +applications or libraries, and may use usbfs through some programming +library that wraps it. Such libraries include +`libusb `__ for C/C++, and +`jUSB `__ for Java. + + **Note** + + This particular documentation is incomplete, especially with respect + to the asynchronous mode. As of kernel 2.5.66 the code and this + (new) documentation need to be cross-reviewed. + +Configure usbfs into Linux kernels by enabling the *USB filesystem* +option (CONFIG_USB_DEVICEFS), and you get basic support for user mode +USB device drivers. Until relatively recently it was often (confusingly) +called *usbdevfs* although it wasn't solving what *devfs* was. Every USB +device will appear in usbfs, regardless of whether or not it has a +kernel driver. + +What files are in "usbfs"? +-------------------------- + +Conventionally mounted at ``/proc/bus/usb``, usbfs features include: + +- ``/proc/bus/usb/devices`` ... a text file showing each of the USB + devices on known to the kernel, and their configuration descriptors. + You can also poll() this to learn about new devices. + +- ``/proc/bus/usb/BBB/DDD`` ... magic files exposing the each device's + configuration descriptors, and supporting a series of ioctls for + making device requests, including I/O to devices. (Purely for access + by programs.) + +Each bus is given a number (BBB) based on when it was enumerated; within +each bus, each device is given a similar number (DDD). Those BBB/DDD +paths are not "stable" identifiers; expect them to change even if you +always leave the devices plugged in to the same hub port. *Don't even +think of saving these in application configuration files.* Stable +identifiers are available, for user mode applications that want to use +them. HID and networking devices expose these stable IDs, so that for +example you can be sure that you told the right UPS to power down its +second server. "usbfs" doesn't (yet) expose those IDs. + +Mounting and Access Control +--------------------------- + +There are a number of mount options for usbfs, which will be of most +interest to you if you need to override the default access control +policy. That policy is that only root may read or write device files +(``/proc/bus/BBB/DDD``) although anyone may read the ``devices`` or +``drivers`` files. I/O requests to the device also need the +CAP_SYS_RAWIO capability, + +The significance of that is that by default, all user mode device +drivers need super-user privileges. You can change modes or ownership in +a driver setup when the device hotplugs, or maye just start the driver +right then, as a privileged server (or some activity within one). That's +the most secure approach for multi-user systems, but for single user +systems ("trusted" by that user) it's more convenient just to grant +everyone all access (using the *devmode=0666* option) so the driver can +start whenever it's needed. + +The mount options for usbfs, usable in /etc/fstab or in command line +invocations of *mount*, are: + +*busgid*\ =NNNNN + Controls the GID used for the /proc/bus/usb/BBB directories. + (Default: 0) + +*busmode*\ =MMM + Controls the file mode used for the /proc/bus/usb/BBB directories. + (Default: 0555) + +*busuid*\ =NNNNN + Controls the UID used for the /proc/bus/usb/BBB directories. + (Default: 0) + +*devgid*\ =NNNNN + Controls the GID used for the /proc/bus/usb/BBB/DDD files. (Default: + 0) + +*devmode*\ =MMM + Controls the file mode used for the /proc/bus/usb/BBB/DDD files. + (Default: 0644) + +*devuid*\ =NNNNN + Controls the UID used for the /proc/bus/usb/BBB/DDD files. (Default: + 0) + +*listgid*\ =NNNNN + Controls the GID used for the /proc/bus/usb/devices and drivers + files. (Default: 0) + +*listmode*\ =MMM + Controls the file mode used for the /proc/bus/usb/devices and + drivers files. (Default: 0444) + +*listuid*\ =NNNNN + Controls the UID used for the /proc/bus/usb/devices and drivers + files. (Default: 0) + +Note that many Linux distributions hard-wire the mount options for usbfs +in their init scripts, such as ``/etc/rc.d/rc.sysinit``, rather than +making it easy to set this per-system policy in ``/etc/fstab``. + +/proc/bus/usb/devices +--------------------- + +This file is handy for status viewing tools in user mode, which can scan +the text format and ignore most of it. More detailed device status +(including class and vendor status) is available from device-specific +files. For information about the current format of this file, see the +``Documentation/usb/proc_usb_info.txt`` file in your Linux kernel +sources. + +This file, in combination with the poll() system call, can also be used +to detect when devices are added or removed: + +:: + + int fd; + struct pollfd pfd; + + fd = open("/proc/bus/usb/devices", O_RDONLY); + pfd = { fd, POLLIN, 0 }; + for (;;) { + /* The first time through, this call will return immediately. */ + poll(&pfd, 1, -1); + + /* To see what's changed, compare the file's previous and current + contents or scan the filesystem. (Scanning is more precise.) */ + } + +Note that this behavior is intended to be used for informational and +debug purposes. It would be more appropriate to use programs such as +udev or HAL to initialize a device or start a user-mode helper program, +for instance. + +/proc/bus/usb/BBB/DDD +--------------------- + +Use these files in one of these basic ways: + +*They can be read,* producing first the device descriptor (18 bytes) and +then the descriptors for the current configuration. See the USB 2.0 spec +for details about those binary data formats. You'll need to convert most +multibyte values from little endian format to your native host byte +order, although a few of the fields in the device descriptor (both of +the BCD-encoded fields, and the vendor and product IDs) will be +byteswapped for you. Note that configuration descriptors include +descriptors for interfaces, altsettings, endpoints, and maybe additional +class descriptors. + +*Perform USB operations* using *ioctl()* requests to make endpoint I/O +requests (synchronously or asynchronously) or manage the device. These +requests need the CAP_SYS_RAWIO capability, as well as filesystem +access permissions. Only one ioctl request can be made on one of these +device files at a time. This means that if you are synchronously reading +an endpoint from one thread, you won't be able to write to a different +endpoint from another thread until the read completes. This works for +*half duplex* protocols, but otherwise you'd use asynchronous i/o +requests. + +Life Cycle of User Mode Drivers +------------------------------- + +Such a driver first needs to find a device file for a device it knows +how to handle. Maybe it was told about it because a ``/sbin/hotplug`` +event handling agent chose that driver to handle the new device. Or +maybe it's an application that scans all the /proc/bus/usb device files, +and ignores most devices. In either case, it should :c:func:`read()` +all the descriptors from the device file, and check them against what it +knows how to handle. It might just reject everything except a particular +vendor and product ID, or need a more complex policy. + +Never assume there will only be one such device on the system at a time! +If your code can't handle more than one device at a time, at least +detect when there's more than one, and have your users choose which +device to use. + +Once your user mode driver knows what device to use, it interacts with +it in either of two styles. The simple style is to make only control +requests; some devices don't need more complex interactions than those. +(An example might be software using vendor-specific control requests for +some initialization or configuration tasks, with a kernel driver for the +rest.) + +More likely, you need a more complex style driver: one using non-control +endpoints, reading or writing data and claiming exclusive use of an +interface. *Bulk* transfers are easiest to use, but only their sibling +*interrupt* transfers work with low speed devices. Both interrupt and +*isochronous* transfers offer service guarantees because their bandwidth +is reserved. Such "periodic" transfers are awkward to use through usbfs, +unless you're using the asynchronous calls. However, interrupt transfers +can also be used in a synchronous "one shot" style. + +Your user-mode driver should never need to worry about cleaning up +request state when the device is disconnected, although it should close +its open file descriptors as soon as it starts seeing the ENODEV errors. + +The ioctl() Requests +-------------------- + +To use these ioctls, you need to include the following headers in your +userspace program: + +:: + + #include + #include + #include + +The standard USB device model requests, from "Chapter 9" of the USB 2.0 +specification, are automatically included from the ```` +header. + +Unless noted otherwise, the ioctl requests described here will update +the modification time on the usbfs file to which they are applied +(unless they fail). A return of zero indicates success; otherwise, a +standard USB error code is returned. (These are documented in +``Documentation/usb/error-codes.txt`` in your kernel sources.) + +Each of these files multiplexes access to several I/O streams, one per +endpoint. Each device has one control endpoint (endpoint zero) which +supports a limited RPC style RPC access. Devices are configured by +hub_wq (in the kernel) setting a device-wide *configuration* that +affects things like power consumption and basic functionality. The +endpoints are part of USB *interfaces*, which may have *altsettings* +affecting things like which endpoints are available. Many devices only +have a single configuration and interface, so drivers for them will +ignore configurations and altsettings. + +Management/Status Requests +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A number of usbfs requests don't deal very directly with device I/O. +They mostly relate to device management and status. These are all +synchronous requests. + +USBDEVFS_CLAIMINTERFACE + This is used to force usbfs to claim a specific interface, which has + not previously been claimed by usbfs or any other kernel driver. The + ioctl parameter is an integer holding the number of the interface + (bInterfaceNumber from descriptor). + + Note that if your driver doesn't claim an interface before trying to + use one of its endpoints, and no other driver has bound to it, then + the interface is automatically claimed by usbfs. + + This claim will be released by a RELEASEINTERFACE ioctl, or by + closing the file descriptor. File modification time is not updated + by this request. + +USBDEVFS_CONNECTINFO + Says whether the device is lowspeed. The ioctl parameter points to a + structure like this: + + :: + + struct usbdevfs_connectinfo { + unsigned int devnum; + unsigned char slow; + }; + + File modification time is not updated by this request. + + *You can't tell whether a "not slow" device is connected at high + speed (480 MBit/sec) or just full speed (12 MBit/sec).* You should + know the devnum value already, it's the DDD value of the device file + name. + +USBDEVFS_GETDRIVER + Returns the name of the kernel driver bound to a given interface (a + string). Parameter is a pointer to this structure, which is + modified: + + :: + + struct usbdevfs_getdriver { + unsigned int interface; + char driver[USBDEVFS_MAXDRIVERNAME + 1]; + }; + + File modification time is not updated by this request. + +USBDEVFS_IOCTL + Passes a request from userspace through to a kernel driver that has + an ioctl entry in the *struct usb_driver* it registered. + + :: + + struct usbdevfs_ioctl { + int ifno; + int ioctl_code; + void *data; + }; + + /* user mode call looks like this. + * 'request' becomes the driver->ioctl() 'code' parameter. + * the size of 'param' is encoded in 'request', and that data + * is copied to or from the driver->ioctl() 'buf' parameter. + */ + static int + usbdev_ioctl (int fd, int ifno, unsigned request, void *param) + { + struct usbdevfs_ioctl wrapper; + + wrapper.ifno = ifno; + wrapper.ioctl_code = request; + wrapper.data = param; + + return ioctl (fd, USBDEVFS_IOCTL, &wrapper); + } + + File modification time is not updated by this request. + + This request lets kernel drivers talk to user mode code through + filesystem operations even when they don't create a character or + block special device. It's also been used to do things like ask + devices what device special file should be used. Two pre-defined + ioctls are used to disconnect and reconnect kernel drivers, so that + user mode code can completely manage binding and configuration of + devices. + +USBDEVFS_RELEASEINTERFACE + This is used to release the claim usbfs made on interface, either + implicitly or because of a USBDEVFS_CLAIMINTERFACE call, before the + file descriptor is closed. The ioctl parameter is an integer holding + the number of the interface (bInterfaceNumber from descriptor); File + modification time is not updated by this request. + + **Warning** + + *No security check is made to ensure that the task which made + the claim is the one which is releasing it. This means that user + mode driver may interfere other ones.* + +USBDEVFS_RESETEP + Resets the data toggle value for an endpoint (bulk or interrupt) to + DATA0. The ioctl parameter is an integer endpoint number (1 to 15, + as identified in the endpoint descriptor), with USB_DIR_IN added + if the device's endpoint sends data to the host. + + **Warning** + + *Avoid using this request. It should probably be removed.* Using + it typically means the device and driver will lose toggle + synchronization. If you really lost synchronization, you likely + need to completely handshake with the device, using a request + like CLEAR_HALT or SET_INTERFACE. + +USBDEVFS_DROP_PRIVILEGES + This is used to relinquish the ability to do certain operations + which are considered to be privileged on a usbfs file descriptor. + This includes claiming arbitrary interfaces, resetting a device on + which there are currently claimed interfaces from other users, and + issuing USBDEVFS_IOCTL calls. The ioctl parameter is a 32 bit mask + of interfaces the user is allowed to claim on this file descriptor. + You may issue this ioctl more than one time to narrow said mask. + +Synchronous I/O Support +~~~~~~~~~~~~~~~~~~~~~~~ + +Synchronous requests involve the kernel blocking until the user mode +request completes, either by finishing successfully or by reporting an +error. In most cases this is the simplest way to use usbfs, although as +noted above it does prevent performing I/O to more than one endpoint at +a time. + +USBDEVFS_BULK + Issues a bulk read or write request to the device. The ioctl + parameter is a pointer to this structure: + + :: + + struct usbdevfs_bulktransfer { + unsigned int ep; + unsigned int len; + unsigned int timeout; /* in milliseconds */ + void *data; + }; + + The "ep" value identifies a bulk endpoint number (1 to 15, as + identified in an endpoint descriptor), masked with USB_DIR_IN when + referring to an endpoint which sends data to the host from the + device. The length of the data buffer is identified by "len"; Recent + kernels support requests up to about 128KBytes. *FIXME say how read + length is returned, and how short reads are handled.*. + +USBDEVFS_CLEAR_HALT + Clears endpoint halt (stall) and resets the endpoint toggle. This is + only meaningful for bulk or interrupt endpoints. The ioctl parameter + is an integer endpoint number (1 to 15, as identified in an endpoint + descriptor), masked with USB_DIR_IN when referring to an endpoint + which sends data to the host from the device. + + Use this on bulk or interrupt endpoints which have stalled, + returning *-EPIPE* status to a data transfer request. Do not issue + the control request directly, since that could invalidate the host's + record of the data toggle. + +USBDEVFS_CONTROL + Issues a control request to the device. The ioctl parameter points + to a structure like this: + + :: + + struct usbdevfs_ctrltransfer { + __u8 bRequestType; + __u8 bRequest; + __u16 wValue; + __u16 wIndex; + __u16 wLength; + __u32 timeout; /* in milliseconds */ + void *data; + }; + + The first eight bytes of this structure are the contents of the + SETUP packet to be sent to the device; see the USB 2.0 specification + for details. The bRequestType value is composed by combining a + USB_TYPE_\* value, a USB_DIR_\* value, and a USB_RECIP_\* + value (from **). If wLength is nonzero, it describes + the length of the data buffer, which is either written to the device + (USB_DIR_OUT) or read from the device (USB_DIR_IN). + + At this writing, you can't transfer more than 4 KBytes of data to or + from a device; usbfs has a limit, and some host controller drivers + have a limit. (That's not usually a problem.) *Also* there's no way + to say it's not OK to get a short read back from the device. + +USBDEVFS_RESET + Does a USB level device reset. The ioctl parameter is ignored. After + the reset, this rebinds all device interfaces. File modification + time is not updated by this request. + + **Warning** + + *Avoid using this call* until some usbcore bugs get fixed, since + it does not fully synchronize device, interface, and driver (not + just usbfs) state. + +USBDEVFS_SETINTERFACE + Sets the alternate setting for an interface. The ioctl parameter is + a pointer to a structure like this: + + :: + + struct usbdevfs_setinterface { + unsigned int interface; + unsigned int altsetting; + }; + + File modification time is not updated by this request. + + Those struct members are from some interface descriptor applying to + the current configuration. The interface number is the + bInterfaceNumber value, and the altsetting number is the + bAlternateSetting value. (This resets each endpoint in the + interface.) + +USBDEVFS_SETCONFIGURATION + Issues the :c:func:`usb_set_configuration()` call for the + device. The parameter is an integer holding the number of a + configuration (bConfigurationValue from descriptor). File + modification time is not updated by this request. + + **Warning** + + *Avoid using this call* until some usbcore bugs get fixed, since + it does not fully synchronize device, interface, and driver (not + just usbfs) state. + +Asynchronous I/O Support +~~~~~~~~~~~~~~~~~~~~~~~~ + +As mentioned above, there are situations where it may be important to +initiate concurrent operations from user mode code. This is particularly +important for periodic transfers (interrupt and isochronous), but it can +be used for other kinds of USB requests too. In such cases, the +asynchronous requests described here are essential. Rather than +submitting one request and having the kernel block until it completes, +the blocking is separate. + +These requests are packaged into a structure that resembles the URB used +by kernel device drivers. (No POSIX Async I/O support here, sorry.) It +identifies the endpoint type (USBDEVFS_URB_TYPE_\*), endpoint +(number, masked with USB_DIR_IN as appropriate), buffer and length, +and a user "context" value serving to uniquely identify each request. +(It's usually a pointer to per-request data.) Flags can modify requests +(not as many as supported for kernel drivers). + +Each request can specify a realtime signal number (between SIGRTMIN and +SIGRTMAX, inclusive) to request a signal be sent when the request +completes. + +When usbfs returns these urbs, the status value is updated, and the +buffer may have been modified. Except for isochronous transfers, the +actual_length is updated to say how many bytes were transferred; if the +USBDEVFS_URB_DISABLE_SPD flag is set ("short packets are not OK"), if +fewer bytes were read than were requested then you get an error report. + +:: + + struct usbdevfs_iso_packet_desc { + unsigned int length; + unsigned int actual_length; + unsigned int status; + }; + + struct usbdevfs_urb { + unsigned char type; + unsigned char endpoint; + int status; + unsigned int flags; + void *buffer; + int buffer_length; + int actual_length; + int start_frame; + int number_of_packets; + int error_count; + unsigned int signr; + void *usercontext; + struct usbdevfs_iso_packet_desc iso_frame_desc[]; + }; + +For these asynchronous requests, the file modification time reflects +when the request was initiated. This contrasts with their use with the +synchronous requests, where it reflects when requests complete. + +USBDEVFS_DISCARDURB + *TBS* File modification time is not updated by this request. + +USBDEVFS_DISCSIGNAL + *TBS* File modification time is not updated by this request. + +USBDEVFS_REAPURB + *TBS* File modification time is not updated by this request. + +USBDEVFS_REAPURBNDELAY + *TBS* File modification time is not updated by this request. + +USBDEVFS_SUBMITURB + *TBS* -- cgit