From e500494cc75743bf08312e11d76d61f067243b62 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 19 Dec 2017 11:27:31 +0000 Subject: ARM: dts: vf610-zii-dev-rev-b: add interrupts for 88e1545 PHY The 88e1545 PHY has its interrupts wired to the VF610, so we might as well use them. Signed-off-by: Russell King --- This is certainly not correct, as all PHYs on this device share the same interrupt line, but we can't specify the pinmux settings individually on each PHY. How should this be handled? --- arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index e500911ce0a5..66b45b9c25de 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -267,12 +267,20 @@ #size-cells = <0>; switch2phy0: phy@0 { + interrupt-parent = <&gpio0>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mv88e1545>; }; switch2phy1: phy@1 { + interrupt-parent = <&gpio0>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; reg = <1>; }; switch2phy2: phy@2 { + interrupt-parent = <&gpio0>; + interrupts = <22 IRQ_TYPE_LEVEL_LOW>; reg = <2>; }; }; @@ -433,6 +441,12 @@ >; }; + pinctrl_mv88e1545: pinctrl-mv88e1545 { + fsl,pins = < + VF610_PAD_PTB0__GPIO_22 0x219d + >; + }; + pinctrl_pca9554_22: pinctrl-pca95540-22 { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x219d -- cgit