From f74faec6b3af9d88943a33ccd08de63b0dab8bc7 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Sat, 31 Dec 2016 19:56:26 -0500 Subject: m68k/mac: Replace via-maciisi driver with via-cuda driver Change the device probe test in the via-cuda.c driver so it will load on Egret-based machines too. Remove the now redundant via-maciisi.c driver. Tested-by: Stan Johnson Signed-off-by: Finn Thain Acked-by: Geert Uytterhoeven Signed-off-by: Michael Ellerman --- arch/m68k/include/asm/macintosh.h | 2 +- arch/m68k/mac/config.c | 18 +- arch/m68k/mac/misc.c | 72 +--- drivers/macintosh/Kconfig | 24 +- drivers/macintosh/Makefile | 1 - drivers/macintosh/adb.c | 4 - drivers/macintosh/via-cuda.c | 8 +- drivers/macintosh/via-maciisi.c | 677 -------------------------------------- 8 files changed, 30 insertions(+), 776 deletions(-) delete mode 100644 drivers/macintosh/via-maciisi.c diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h index 42235e7fbeed..5b81ab188aa5 100644 --- a/arch/m68k/include/asm/macintosh.h +++ b/arch/m68k/include/asm/macintosh.h @@ -38,7 +38,7 @@ struct mac_model #define MAC_ADB_NONE 0 #define MAC_ADB_II 1 -#define MAC_ADB_IISI 2 +#define MAC_ADB_EGRET 2 #define MAC_ADB_CUDA 3 #define MAC_ADB_PB1 4 #define MAC_ADB_PB2 5 diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c index e46895316eb0..9dc65a4c28d2 100644 --- a/arch/m68k/mac/config.c +++ b/arch/m68k/mac/config.c @@ -286,7 +286,7 @@ static struct mac_model mac_data_table[] = { }, { .ident = MAC_MODEL_IISI, .name = "IIsi", - .adb_type = MAC_ADB_IISI, + .adb_type = MAC_ADB_EGRET, .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_OLD, .scc_type = MAC_SCC_II, @@ -295,7 +295,7 @@ static struct mac_model mac_data_table[] = { }, { .ident = MAC_MODEL_IIVI, .name = "IIvi", - .adb_type = MAC_ADB_IISI, + .adb_type = MAC_ADB_EGRET, .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_LC, .scc_type = MAC_SCC_II, @@ -304,7 +304,7 @@ static struct mac_model mac_data_table[] = { }, { .ident = MAC_MODEL_IIVX, .name = "IIvx", - .adb_type = MAC_ADB_IISI, + .adb_type = MAC_ADB_EGRET, .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_LC, .scc_type = MAC_SCC_II, @@ -319,7 +319,7 @@ static struct mac_model mac_data_table[] = { { .ident = MAC_MODEL_CLII, .name = "Classic II", - .adb_type = MAC_ADB_IISI, + .adb_type = MAC_ADB_EGRET, .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_LC, .scc_type = MAC_SCC_II, @@ -352,7 +352,7 @@ static struct mac_model mac_data_table[] = { { .ident = MAC_MODEL_LC, .name = "LC", - .adb_type = MAC_ADB_IISI, + .adb_type = MAC_ADB_EGRET, .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_LC, .scc_type = MAC_SCC_II, @@ -361,7 +361,7 @@ static struct mac_model mac_data_table[] = { }, { .ident = MAC_MODEL_LCII, .name = "LC II", - .adb_type = MAC_ADB_IISI, + .adb_type = MAC_ADB_EGRET, .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_LC, .scc_type = MAC_SCC_II, @@ -370,7 +370,7 @@ static struct mac_model mac_data_table[] = { }, { .ident = MAC_MODEL_LCIII, .name = "LC III", - .adb_type = MAC_ADB_IISI, + .adb_type = MAC_ADB_EGRET, .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_LC, .scc_type = MAC_SCC_II, @@ -498,7 +498,7 @@ static struct mac_model mac_data_table[] = { { .ident = MAC_MODEL_P460, .name = "Performa 460", - .adb_type = MAC_ADB_IISI, + .adb_type = MAC_ADB_EGRET, .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_LC, .scc_type = MAC_SCC_II, @@ -575,7 +575,7 @@ static struct mac_model mac_data_table[] = { }, { .ident = MAC_MODEL_P600, .name = "Performa 600", - .adb_type = MAC_ADB_IISI, + .adb_type = MAC_ADB_EGRET, .via_type = MAC_VIA_IICI, .scsi_type = MAC_SCSI_LC, .scc_type = MAC_SCC_II, diff --git a/arch/m68k/mac/misc.c b/arch/m68k/mac/misc.c index c6d351f5bd79..f4bb73fcb67a 100644 --- a/arch/m68k/mac/misc.c +++ b/arch/m68k/mac/misc.c @@ -142,54 +142,6 @@ static void pmu_write_pram(int offset, __u8 data) #define pmu_write_pram NULL #endif -#if 0 /* def CONFIG_ADB_MACIISI */ -extern int maciisi_request(struct adb_request *req, - void (*done)(struct adb_request *), int nbytes, ...); - -static long maciisi_read_time(void) -{ - struct adb_request req; - long time; - - if (maciisi_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME)) - return 0; - - time = (req.reply[3] << 24) | (req.reply[4] << 16) - | (req.reply[5] << 8) | req.reply[6]; - return time - RTC_OFFSET; -} - -static void maciisi_write_time(long data) -{ - struct adb_request req; - data += RTC_OFFSET; - maciisi_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME, - (data >> 24) & 0xFF, (data >> 16) & 0xFF, - (data >> 8) & 0xFF, data & 0xFF); -} - -static __u8 maciisi_read_pram(int offset) -{ - struct adb_request req; - if (maciisi_request(&req, NULL, 4, CUDA_PACKET, CUDA_GET_PRAM, - (offset >> 8) & 0xFF, offset & 0xFF)) - return 0; - return req.reply[3]; -} - -static void maciisi_write_pram(int offset, __u8 data) -{ - struct adb_request req; - maciisi_request(&req, NULL, 5, CUDA_PACKET, CUDA_SET_PRAM, - (offset >> 8) & 0xFF, offset & 0xFF, data); -} -#else -#define maciisi_read_time() 0 -#define maciisi_write_time(n) -#define maciisi_read_pram NULL -#define maciisi_write_pram NULL -#endif - /* * VIA PRAM/RTC access routines * @@ -458,11 +410,10 @@ void mac_pram_read(int offset, __u8 *buffer, int len) int i; switch(macintosh_config->adb_type) { - case MAC_ADB_IISI: - func = maciisi_read_pram; break; case MAC_ADB_PB1: case MAC_ADB_PB2: func = pmu_read_pram; break; + case MAC_ADB_EGRET: case MAC_ADB_CUDA: func = cuda_read_pram; break; default: @@ -481,11 +432,10 @@ void mac_pram_write(int offset, __u8 *buffer, int len) int i; switch(macintosh_config->adb_type) { - case MAC_ADB_IISI: - func = maciisi_write_pram; break; case MAC_ADB_PB1: case MAC_ADB_PB2: func = pmu_write_pram; break; + case MAC_ADB_EGRET: case MAC_ADB_CUDA: func = cuda_write_pram; break; default: @@ -500,17 +450,13 @@ void mac_pram_write(int offset, __u8 *buffer, int len) void mac_poweroff(void) { - /* - * MAC_ADB_IISI may need to be moved up here if it doesn't actually - * work using the ADB packet method. --David Kilzer - */ - if (oss_present) { oss_shutdown(); } else if (macintosh_config->adb_type == MAC_ADB_II) { via_shutdown(); #ifdef CONFIG_ADB_CUDA - } else if (macintosh_config->adb_type == MAC_ADB_CUDA) { + } else if (macintosh_config->adb_type == MAC_ADB_EGRET || + macintosh_config->adb_type == MAC_ADB_CUDA) { cuda_shutdown(); #endif #ifdef CONFIG_ADB_PMU68K @@ -550,7 +496,8 @@ void mac_reset(void) local_irq_restore(flags); } #ifdef CONFIG_ADB_CUDA - } else if (macintosh_config->adb_type == MAC_ADB_CUDA) { + } else if (macintosh_config->adb_type == MAC_ADB_EGRET || + macintosh_config->adb_type == MAC_ADB_CUDA) { cuda_restart(); #endif #ifdef CONFIG_ADB_PMU68K @@ -699,13 +646,11 @@ int mac_hwclk(int op, struct rtc_time *t) case MAC_ADB_IOP: now = via_read_time(); break; - case MAC_ADB_IISI: - now = maciisi_read_time(); - break; case MAC_ADB_PB1: case MAC_ADB_PB2: now = pmu_read_time(); break; + case MAC_ADB_EGRET: case MAC_ADB_CUDA: now = cuda_read_time(); break; @@ -737,6 +682,7 @@ int mac_hwclk(int op, struct rtc_time *t) case MAC_ADB_IOP: via_write_time(now); break; + case MAC_ADB_EGRET: case MAC_ADB_CUDA: cuda_write_time(now); break; @@ -744,8 +690,6 @@ int mac_hwclk(int op, struct rtc_time *t) case MAC_ADB_PB2: pmu_write_time(now); break; - case MAC_ADB_IISI: - maciisi_write_time(now); } } return 0; diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 5d80810934df..97a420c11eed 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -30,14 +30,6 @@ config ADB_MACII Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and Centris 650. -config ADB_MACIISI - bool "Include Mac IIsi ADB driver" - depends on ADB && MAC && BROKEN - help - Say Y here if want your kernel to support Macintosh systems that use - the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic - II, LC, LC II, LC III, Performa 460, and the Performa 600. - config ADB_IOP bool "Include IOP (IIfx/Quadra 9x0) ADB driver" depends on ADB && MAC @@ -60,17 +52,15 @@ config ADB_PMU68K # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU config ADB_CUDA - bool "Support for CUDA based Macs and PowerMacs" + bool "Support for Cuda/Egret based Macs and PowerMacs" depends on (ADB || PPC_PMAC) && !PPC_PMAC64 help - This provides support for CUDA based Macintosh and Power Macintosh - systems. This includes many m68k based Macs (Color Classic, Mac TV, - Performa 475, Performa 520, Performa 550, Performa 575, - Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and - Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs, - the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later - models should use CONFIG_ADB_PMU instead. It is safe to say Y here - even if your machine doesn't have a CUDA. + This provides support for Cuda/Egret based Macintosh and + Power Macintosh systems. This includes most m68k based Macs, + most Old World PowerMacs, the first generation iMacs, the + Blue & White G3 and the "Yikes" G4 (PCI Graphics). All later + models should use CONFIG_ADB_PMU instead. It is safe to say Y + here even if your machine doesn't have a Cuda or Egret device. If unsure say Y. diff --git a/drivers/macintosh/Makefile b/drivers/macintosh/Makefile index 383ba920085b..516eb65bcacc 100644 --- a/drivers/macintosh/Makefile +++ b/drivers/macintosh/Makefile @@ -20,7 +20,6 @@ obj-$(CONFIG_PMAC_SMU) += smu.o obj-$(CONFIG_ADB) += adb.o obj-$(CONFIG_ADB_MACII) += via-macii.o -obj-$(CONFIG_ADB_MACIISI) += via-maciisi.o obj-$(CONFIG_ADB_IOP) += adb-iop.o obj-$(CONFIG_ADB_PMU68K) += via-pmu68k.o obj-$(CONFIG_ADB_MACIO) += macio-adb.o diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c index 226179b975a0..152414e6378a 100644 --- a/drivers/macintosh/adb.c +++ b/drivers/macintosh/adb.c @@ -48,7 +48,6 @@ EXPORT_SYMBOL(adb_client_list); extern struct adb_driver via_macii_driver; -extern struct adb_driver via_maciisi_driver; extern struct adb_driver via_cuda_driver; extern struct adb_driver adb_iop_driver; extern struct adb_driver via_pmu_driver; @@ -59,9 +58,6 @@ static struct adb_driver *adb_driver_list[] = { #ifdef CONFIG_ADB_MACII &via_macii_driver, #endif -#ifdef CONFIG_ADB_MACIISI - &via_maciisi_driver, -#endif #ifdef CONFIG_ADB_CUDA &via_cuda_driver, #endif diff --git a/drivers/macintosh/via-cuda.c b/drivers/macintosh/via-cuda.c index 1a742bd9f612..c60415958dfe 100644 --- a/drivers/macintosh/via-cuda.c +++ b/drivers/macintosh/via-cuda.c @@ -205,12 +205,13 @@ int __init find_via_cuda(void) struct adb_request req; int err; - if (macintosh_config->adb_type != MAC_ADB_CUDA) + if (macintosh_config->adb_type != MAC_ADB_CUDA && + macintosh_config->adb_type != MAC_ADB_EGRET) return 0; via = via1; cuda_state = idle; - mcu_is_egret = false; + mcu_is_egret = macintosh_config->adb_type == MAC_ADB_EGRET; err = cuda_init_via(); if (err) { @@ -323,7 +324,8 @@ cuda_probe(void) if (sys_ctrler != SYS_CTRLER_CUDA) return -ENODEV; #else - if (macintosh_config->adb_type != MAC_ADB_CUDA) + if (macintosh_config->adb_type != MAC_ADB_CUDA && + macintosh_config->adb_type != MAC_ADB_EGRET) return -ENODEV; #endif if (via == NULL) diff --git a/drivers/macintosh/via-maciisi.c b/drivers/macintosh/via-maciisi.c deleted file mode 100644 index 34d02a91b29f..000000000000 --- a/drivers/macintosh/via-maciisi.c +++ /dev/null @@ -1,677 +0,0 @@ -/* - * Device driver for the IIsi-style ADB on some Mac LC and II-class machines - * - * Based on via-cuda.c and via-macii.c, as well as the original - * adb-bus.c, which in turn is somewhat influenced by (but uses no - * code from) the NetBSD HWDIRECT ADB code. Original IIsi driver work - * was done by Robert Thompson and integrated into the old style - * driver by Michael Schmitz. - * - * Original sources (c) Alan Cox, Paul Mackerras, and others. - * - * Rewritten for Unified ADB by David Huggins-Daines - * - * 7/13/2000- extensive changes by Andrew McPherson - * Works about 30% of the time now. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static volatile unsigned char *via; - -/* VIA registers - spaced 0x200 bytes apart - only the ones we actually use */ -#define RS 0x200 /* skip between registers */ -#define B 0 /* B-side data */ -#define A RS /* A-side data */ -#define DIRB (2*RS) /* B-side direction (1=output) */ -#define DIRA (3*RS) /* A-side direction (1=output) */ -#define SR (10*RS) /* Shift register */ -#define ACR (11*RS) /* Auxiliary control register */ -#define IFR (13*RS) /* Interrupt flag register */ -#define IER (14*RS) /* Interrupt enable register */ - -/* Bits in B data register: all active low */ -#define TREQ 0x08 /* Transfer request (input) */ -#define TACK 0x10 /* Transfer acknowledge (output) */ -#define TIP 0x20 /* Transfer in progress (output) */ -#define ST_MASK 0x30 /* mask for selecting ADB state bits */ - -/* Bits in ACR */ -#define SR_CTRL 0x1c /* Shift register control bits */ -#define SR_EXT 0x0c /* Shift on external clock */ -#define SR_OUT 0x10 /* Shift out if 1 */ - -/* Bits in IFR and IER */ -#define IER_SET 0x80 /* set bits in IER */ -#define IER_CLR 0 /* clear bits in IER */ -#define SR_INT 0x04 /* Shift register full/empty */ -#define SR_DATA 0x08 /* Shift register data */ -#define SR_CLOCK 0x10 /* Shift register clock */ - -#define ADB_DELAY 150 - -#undef DEBUG_MACIISI_ADB - -static struct adb_request* current_req; -static struct adb_request* last_req; -static unsigned char maciisi_rbuf[16]; -static unsigned char *reply_ptr; -static int data_index; -static int reading_reply; -static int reply_len; -static int tmp; -static int need_sync; - -static enum maciisi_state { - idle, - sending, - reading, -} maciisi_state; - -static int maciisi_probe(void); -static int maciisi_init(void); -static int maciisi_send_request(struct adb_request* req, int sync); -static void maciisi_sync(struct adb_request *req); -static int maciisi_write(struct adb_request* req); -static irqreturn_t maciisi_interrupt(int irq, void* arg); -static void maciisi_input(unsigned char *buf, int nb); -static int maciisi_init_via(void); -static void maciisi_poll(void); -static int maciisi_start(void); - -struct adb_driver via_maciisi_driver = { - "Mac IIsi", - maciisi_probe, - maciisi_init, - maciisi_send_request, - NULL, /* maciisi_adb_autopoll, */ - maciisi_poll, - NULL /* maciisi_reset_adb_bus */ -}; - -static int -maciisi_probe(void) -{ - if (macintosh_config->adb_type != MAC_ADB_IISI) - return -ENODEV; - - via = via1; - return 0; -} - -static int -maciisi_init(void) -{ - int err; - - if (via == NULL) - return -ENODEV; - - if ((err = maciisi_init_via())) { - printk(KERN_ERR "maciisi_init: maciisi_init_via() failed, code %d\n", err); - via = NULL; - return err; - } - - if (request_irq(IRQ_MAC_ADB, maciisi_interrupt, 0, "ADB", - maciisi_interrupt)) { - printk(KERN_ERR "maciisi_init: can't get irq %d\n", IRQ_MAC_ADB); - return -EAGAIN; - } - - printk("adb: Mac IIsi driver v0.2 for Unified ADB.\n"); - return 0; -} - -/* Flush data from the ADB controller */ -static void -maciisi_stfu(void) -{ - int status = via[B] & (TIP|TREQ); - - if (status & TREQ) { -#ifdef DEBUG_MACIISI_ADB - printk (KERN_DEBUG "maciisi_stfu called with TREQ high!\n"); -#endif - return; - } - - udelay(ADB_DELAY); - via[ACR] &= ~SR_OUT; - via[IER] = IER_CLR | SR_INT; - - udelay(ADB_DELAY); - - status = via[B] & (TIP|TREQ); - - if (!(status & TREQ)) - { - via[B] |= TIP; - - while(1) - { - int poll_timeout = ADB_DELAY * 5; - /* Poll for SR interrupt */ - while (!(via[IFR] & SR_INT) && poll_timeout-- > 0) - status = via[B] & (TIP|TREQ); - - tmp = via[SR]; /* Clear shift register */ -#ifdef DEBUG_MACIISI_ADB - printk(KERN_DEBUG "maciisi_stfu: status %x timeout %d data %x\n", - status, poll_timeout, tmp); -#endif - if(via[B] & TREQ) - break; - - /* ACK on-off */ - via[B] |= TACK; - udelay(ADB_DELAY); - via[B] &= ~TACK; - } - - /* end frame */ - via[B] &= ~TIP; - udelay(ADB_DELAY); - } - - via[IER] = IER_SET | SR_INT; -} - -/* All specifically VIA-related initialization goes here */ -static int -maciisi_init_via(void) -{ - int i; - - /* Set the lines up. We want TREQ as input TACK|TIP as output */ - via[DIRB] = (via[DIRB] | TACK | TIP) & ~TREQ; - /* Shift register on input */ - via[ACR] = (via[ACR] & ~SR_CTRL) | SR_EXT; -#ifdef DEBUG_MACIISI_ADB - printk(KERN_DEBUG "maciisi_init_via: initial status %x\n", via[B] & (TIP|TREQ)); -#endif - /* Wipe any pending data and int */ - tmp = via[SR]; - /* Enable keyboard interrupts */ - via[IER] = IER_SET | SR_INT; - /* Set initial state: idle */ - via[B] &= ~(TACK|TIP); - /* Clear interrupt bit */ - via[IFR] = SR_INT; - - for(i = 0; i < 60; i++) { - udelay(ADB_DELAY); - maciisi_stfu(); - udelay(ADB_DELAY); - if(via[B] & TREQ) - break; - } - if (i == 60) - printk(KERN_ERR "maciisi_init_via: bus jam?\n"); - - maciisi_state = idle; - need_sync = 0; - - return 0; -} - -/* Send a request, possibly waiting for a reply */ -static int -maciisi_send_request(struct adb_request* req, int sync) -{ - int i; - -#ifdef DEBUG_MACIISI_ADB - static int dump_packet = 0; -#endif - - if (via == NULL) { - req->complete = 1; - return -ENXIO; - } - -#ifdef DEBUG_MACIISI_ADB - if (dump_packet) { - printk(KERN_DEBUG "maciisi_send_request:"); - for (i = 0; i < req->nbytes; i++) { - printk(" %.2x", req->data[i]); - } - printk(" sync %d\n", sync); - } -#endif - - req->reply_expected = 1; - - i = maciisi_write(req); - if (i) - { - /* Normally, if a packet requires syncing, that happens at the end of - * maciisi_send_request. But if the transfer fails, it will be restarted - * by maciisi_interrupt(). We use need_sync to tell maciisi_interrupt - * when to sync a packet that it sends out. - * - * Suggestions on a better way to do this are welcome. - */ - if(i == -EBUSY && sync) - need_sync = 1; - else - need_sync = 0; - return i; - } - if(sync) - maciisi_sync(req); - - return 0; -} - -/* Poll the ADB chip until the request completes */ -static void maciisi_sync(struct adb_request *req) -{ - int count = 0; - -#ifdef DEBUG_MACIISI_ADB - printk(KERN_DEBUG "maciisi_sync called\n"); -#endif - - /* If for some reason the ADB chip shuts up on us, we want to avoid an endless loop. */ - while (!req->complete && count++ < 50) { - maciisi_poll(); - } - /* This could be BAD... when the ADB controller doesn't respond - * for this long, it's probably not coming back :-( */ - if (count > 50) /* Hopefully shouldn't happen */ - printk(KERN_ERR "maciisi_send_request: poll timed out!\n"); -} - -int -maciisi_request(struct adb_request *req, void (*done)(struct adb_request *), - int nbytes, ...) -{ - va_list list; - int i; - - req->nbytes = nbytes; - req->done = done; - req->reply_expected = 0; - va_start(list, nbytes); - for (i = 0; i < nbytes; i++) - req->data[i++] = va_arg(list, int); - va_end(list); - - return maciisi_send_request(req, 1); -} - -/* Enqueue a request, and run the queue if possible */ -static int -maciisi_write(struct adb_request* req) -{ - unsigned long flags; - int i; - - /* We will accept CUDA packets - the VIA sends them to us, so - it figures that we should be able to send them to it */ - if (req->nbytes < 2 || req->data[0] > CUDA_PACKET) { - printk(KERN_ERR "maciisi_write: packet too small or not an ADB or CUDA packet\n"); - req->complete = 1; - return -EINVAL; - } - req->next = NULL; - req->sent = 0; - req->complete = 0; - req->reply_len = 0; - - local_irq_save(flags); - - if (current_req) { - last_req->next = req; - last_req = req; - } else { - current_req = req; - last_req = req; - } - if (maciisi_state == idle) - { - i = maciisi_start(); - if(i != 0) - { - local_irq_restore(flags); - return i; - } - } - else - { -#ifdef DEBUG_MACIISI_ADB - printk(KERN_DEBUG "maciisi_write: would start, but state is %d\n", maciisi_state); -#endif - local_irq_restore(flags); - return -EBUSY; - } - - local_irq_restore(flags); - - return 0; -} - -static int -maciisi_start(void) -{ - struct adb_request* req; - int status; - -#ifdef DEBUG_MACIISI_ADB - status = via[B] & (TIP | TREQ); - - printk(KERN_DEBUG "maciisi_start called, state=%d, status=%x, ifr=%x\n", maciisi_state, status, via[IFR]); -#endif - - if (maciisi_state != idle) { - /* shouldn't happen */ - printk(KERN_ERR "maciisi_start: maciisi_start called when driver busy!\n"); - return -EBUSY; - } - - req = current_req; - if (req == NULL) - return -EINVAL; - - status = via[B] & (TIP|TREQ); - if (!(status & TREQ)) { -#ifdef DEBUG_MACIISI_ADB - printk(KERN_DEBUG "maciisi_start: bus busy - aborting\n"); -#endif - return -EBUSY; - } - - /* Okay, send */ -#ifdef DEBUG_MACIISI_ADB - printk(KERN_DEBUG "maciisi_start: sending\n"); -#endif - /* Set state to active */ - via[B] |= TIP; - /* ACK off */ - via[B] &= ~TACK; - /* Delay */ - udelay(ADB_DELAY); - /* Shift out and send */ - via[ACR] |= SR_OUT; - via[SR] = req->data[0]; - data_index = 1; - /* ACK on */ - via[B] |= TACK; - maciisi_state = sending; - - return 0; -} - -void -maciisi_poll(void) -{ - unsigned long flags; - - local_irq_save(flags); - if (via[IFR] & SR_INT) { - maciisi_interrupt(0, NULL); - } - else /* avoid calling this function too quickly in a loop */ - udelay(ADB_DELAY); - - local_irq_restore(flags); -} - -/* Shift register interrupt - this is *supposed* to mean that the - register is either full or empty. In practice, I have no idea what - it means :( */ -static irqreturn_t -maciisi_interrupt(int irq, void* arg) -{ - int status; - struct adb_request *req; -#ifdef DEBUG_MACIISI_ADB - static int dump_reply = 0; -#endif - int i; - unsigned long flags; - - local_irq_save(flags); - - status = via[B] & (TIP|TREQ); -#ifdef DEBUG_MACIISI_ADB - printk(KERN_DEBUG "state %d status %x ifr %x\n", maciisi_state, status, via[IFR]); -#endif - - if (!(via[IFR] & SR_INT)) { - /* Shouldn't happen, we hope */ - printk(KERN_ERR "maciisi_interrupt: called without interrupt flag set\n"); - local_irq_restore(flags); - return IRQ_NONE; - } - - /* Clear the interrupt */ - /* via[IFR] = SR_INT; */ - - switch_start: - switch (maciisi_state) { - case idle: - if (status & TIP) - printk(KERN_ERR "maciisi_interrupt: state is idle but TIP asserted!\n"); - - if(!reading_reply) - udelay(ADB_DELAY); - /* Shift in */ - via[ACR] &= ~SR_OUT; - /* Signal start of frame */ - via[B] |= TIP; - /* Clear the interrupt (throw this value on the floor, it's useless) */ - tmp = via[SR]; - /* ACK adb chip, high-low */ - via[B] |= TACK; - udelay(ADB_DELAY); - via[B] &= ~TACK; - reply_len = 0; - maciisi_state = reading; - if (reading_reply) { - reply_ptr = current_req->reply; - } else { - reply_ptr = maciisi_rbuf; - } - break; - - case sending: - /* via[SR]; */ - /* Set ACK off */ - via[B] &= ~TACK; - req = current_req; - - if (!(status & TREQ)) { - /* collision */ - printk(KERN_ERR "maciisi_interrupt: send collision\n"); - /* Set idle and input */ - via[ACR] &= ~SR_OUT; - tmp = via[SR]; - via[B] &= ~TIP; - /* Must re-send */ - reading_reply = 0; - reply_len = 0; - maciisi_state = idle; - udelay(ADB_DELAY); - /* process this now, because the IFR has been cleared */ - goto switch_start; - } - - udelay(ADB_DELAY); - - if (data_index >= req->nbytes) { - /* Sent the whole packet, put the bus back in idle state */ - /* Shift in, we are about to read a reply (hopefully) */ - via[ACR] &= ~SR_OUT; - tmp = via[SR]; - /* End of frame */ - via[B] &= ~TIP; - req->sent = 1; - maciisi_state = idle; - if (req->reply_expected) { - /* Note: only set this once we've - successfully sent the packet */ - reading_reply = 1; - } else { - current_req = req->next; - if (req->done) - (*req->done)(req); - /* Do any queued requests now */ - i = maciisi_start(); - if(i == 0 && need_sync) { - /* Packet needs to be synced */ - maciisi_sync(current_req); - } - if(i != -EBUSY) - need_sync = 0; - } - } else { - /* Sending more stuff */ - /* Shift out */ - via[ACR] |= SR_OUT; - /* Write */ - via[SR] = req->data[data_index++]; - /* Signal 'byte ready' */ - via[B] |= TACK; - } - break; - - case reading: - /* Shift in */ - /* via[ACR] &= ~SR_OUT; */ /* Not in 2.2 */ - if (reply_len++ > 16) { - printk(KERN_ERR "maciisi_interrupt: reply too long, aborting read\n"); - via[B] |= TACK; - udelay(ADB_DELAY); - via[B] &= ~(TACK|TIP); - maciisi_state = idle; - i = maciisi_start(); - if(i == 0 && need_sync) { - /* Packet needs to be synced */ - maciisi_sync(current_req); - } - if(i != -EBUSY) - need_sync = 0; - break; - } - /* Read data */ - *reply_ptr++ = via[SR]; - status = via[B] & (TIP|TREQ); - /* ACK on/off */ - via[B] |= TACK; - udelay(ADB_DELAY); - via[B] &= ~TACK; - if (!(status & TREQ)) - break; /* more stuff to deal with */ - - /* end of frame */ - via[B] &= ~TIP; - tmp = via[SR]; /* That's what happens in 2.2 */ - udelay(ADB_DELAY); /* Give controller time to recover */ - - /* end of packet, deal with it */ - if (reading_reply) { - req = current_req; - req->reply_len = reply_ptr - req->reply; - if (req->data[0] == ADB_PACKET) { - /* Have to adjust the reply from ADB commands */ - if (req->reply_len <= 2 || (req->reply[1] & 2) != 0) { - /* the 0x2 bit indicates no response */ - req->reply_len = 0; - } else { - /* leave just the command and result bytes in the reply */ - req->reply_len -= 2; - memmove(req->reply, req->reply + 2, req->reply_len); - } - } -#ifdef DEBUG_MACIISI_ADB - if (dump_reply) { - int i; - printk(KERN_DEBUG "maciisi_interrupt: reply is "); - for (i = 0; i < req->reply_len; ++i) - printk(" %.2x", req->reply[i]); - printk("\n"); - } -#endif - req->complete = 1; - current_req = req->next; - if (req->done) - (*req->done)(req); - /* Obviously, we got it */ - reading_reply = 0; - } else { - maciisi_input(maciisi_rbuf, reply_ptr - maciisi_rbuf); - } - maciisi_state = idle; - status = via[B] & (TIP|TREQ); - if (!(status & TREQ)) { - /* Timeout?! More likely, another packet coming in already */ -#ifdef DEBUG_MACIISI_ADB - printk(KERN_DEBUG "extra data after packet: status %x ifr %x\n", - status, via[IFR]); -#endif -#if 0 - udelay(ADB_DELAY); - via[B] |= TIP; - - maciisi_state = reading; - reading_reply = 0; - reply_ptr = maciisi_rbuf; -#else - /* Process the packet now */ - reading_reply = 0; - goto switch_start; -#endif - /* We used to do this... but the controller might actually have data for us */ - /* maciisi_stfu(); */ - } - else { - /* Do any queued requests now if possible */ - i = maciisi_start(); - if(i == 0 && need_sync) { - /* Packet needs to be synced */ - maciisi_sync(current_req); - } - if(i != -EBUSY) - need_sync = 0; - } - break; - - default: - printk("maciisi_interrupt: unknown maciisi_state %d?\n", maciisi_state); - } - local_irq_restore(flags); - return IRQ_HANDLED; -} - -static void -maciisi_input(unsigned char *buf, int nb) -{ -#ifdef DEBUG_MACIISI_ADB - int i; -#endif - - switch (buf[0]) { - case ADB_PACKET: - adb_input(buf+2, nb-2, buf[1] & 0x40); - break; - default: -#ifdef DEBUG_MACIISI_ADB - printk(KERN_DEBUG "data from IIsi ADB (%d bytes):", nb); - for (i = 0; i < nb; ++i) - printk(" %.2x", buf[i]); - printk("\n"); -#endif - break; - } -} -- cgit