From f1fb64b04bf414ab04e31ac107bb28137105c5fd Mon Sep 17 00:00:00 2001 From: Robert Shearman Date: Thu, 28 Feb 2019 11:43:43 +0000 Subject: i2c: mux: pca954x: allow management of device idle state via sysfs The behaviour, by default, to not deselect after each transfer is unsafe when there is a device with an address that conflicts with another device on another mux on the same parent bus, and it may not be convenient to use devicetree to set the deselect mux, e.g. when running on x86_64 when ACPI is used to discover most of the device hierarchy. Therefore, provide the ability to set the idle state behaviour using a new sysfs file, idle_state as a complement to the method of instantiating the device via sysfs. The possible behaviours are disconnect, i.e. to deselect all channels from the mux, as-is (the default), i.e. leave the last channel selected, and set a predetermined channel. The current behaviour of leaving the channel as-is after each transaction is preserved. Signed-off-by: Robert Shearman Signed-off-by: Peter Rosin --- .../ABI/testing/sysfs-bus-i2c-devices-pca954x | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x (limited to 'Documentation/ABI') diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x b/Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x new file mode 100644 index 000000000000..0b0de8cd0d13 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-pca954x @@ -0,0 +1,20 @@ +What: /sys/bus/i2c/.../idle_state +Date: January 2019 +KernelVersion: 5.2 +Contact: Robert Shearman +Description: + Value that exists only for mux devices that can be + written to control the behaviour of the multiplexer on + idle. Possible values: + -2 - disconnect on idle, i.e. deselect the last used + channel, which is useful when there is a device + with an address that conflicts with another + device on another mux on the same parent bus. + -1 - leave the mux as-is, which is the most optimal + setting in terms of I2C operations and is the + default mode. + 0.. - set the mux to a predetermined channel, + which is useful if there is one channel that is + used almost always, and you want to reduce the + latency for normal operations after rare + transactions on other channels -- cgit