From b3ed23213eab1e08be594ad44b4237588c58af09 Mon Sep 17 00:00:00 2001 From: "Tobin C. Harding" Date: Wed, 20 Dec 2017 08:17:15 +1100 Subject: doc: convert printk-formats.txt to rst Documentation/printk-formats.txt is a candidate for conversion to ReStructuredText format. Some effort has already been made to do this conversion even thought the suffix is currently .txt Changes required to complete conversion - Move printk-formats.txt to core-api/printk-formats.rst - Add entry to Documentation/core-api/index.rst - Remove entry from Documentation/00-INDEX - Fix minor grammatical errors. - Order heading adornments as suggested by rst docs. - Use 'Passed by reference' uniformly. - Update pointer documentation around %px specifier. - Fix erroneous double backticks (to commas). - Remove extraneous double backticks (suggested by Jonathan Corbet). - Simplify documentation for kobject. Signed-off-by: Tobin C. Harding [jc: downcased "kernel"] Signed-off-by: Jonathan Corbet --- Documentation/core-api/printk-formats.rst | 492 ++++++++++++++++++++++++++++++ 1 file changed, 492 insertions(+) create mode 100644 Documentation/core-api/printk-formats.rst (limited to 'Documentation/core-api/printk-formats.rst') diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst new file mode 100644 index 000000000000..258b46435320 --- /dev/null +++ b/Documentation/core-api/printk-formats.rst @@ -0,0 +1,492 @@ +========================================= +How to get printk format specifiers right +========================================= + +:Author: Randy Dunlap +:Author: Andrew Murray + + +Integer types +============= + +:: + + If variable is of Type, use printk format specifier: + ------------------------------------------------------------ + int %d or %x + unsigned int %u or %x + long %ld or %lx + unsigned long %lu or %lx + long long %lld or %llx + unsigned long long %llu or %llx + size_t %zu or %zx + ssize_t %zd or %zx + s32 %d or %x + u32 %u or %x + s64 %lld or %llx + u64 %llu or %llx + + +If is dependent on a config option for its size (e.g., sector_t, +blkcnt_t) or is architecture-dependent for its size (e.g., tcflag_t), use a +format specifier of its largest possible type and explicitly cast to it. + +Example:: + + printk("test: sector number/total blocks: %llu/%llu\n", + (unsigned long long)sector, (unsigned long long)blockcount); + +Reminder: sizeof() returns type size_t. + +The kernel's printf does not support %n. Floating point formats (%e, %f, +%g, %a) are also not recognized, for obvious reasons. Use of any +unsupported specifier or length qualifier results in a WARN and early +return from vsnprintf(). + +Pointer types +============= + +A raw pointer value may be printed with %p which will hash the address +before printing. The kernel also supports extended specifiers for printing +pointers of different types. + +Plain Pointers +-------------- + +:: + + %p abcdef12 or 00000000abcdef12 + +Pointers printed without a specifier extension (i.e unadorned %p) are +hashed to prevent leaking information about the kernel memory layout. This +has the added benefit of providing a unique identifier. On 64-bit machines +the first 32 bits are zeroed. If you *really* want the address see %px +below. + +Symbols/Function Pointers +------------------------- + +:: + + %pF versatile_init+0x0/0x110 + %pf versatile_init + %pS versatile_init+0x0/0x110 + %pSR versatile_init+0x9/0x110 + (with __builtin_extract_return_addr() translation) + %ps versatile_init + %pB prev_fn_of_versatile_init+0x88/0x88 + + +The ``F`` and ``f`` specifiers are for printing function pointers, +for example, f->func, &gettimeofday. They have the same result as +``S`` and ``s`` specifiers. But they do an extra conversion on +ia64, ppc64 and parisc64 architectures where the function pointers +are actually function descriptors. + +The ``S`` and ``s`` specifiers can be used for printing symbols +from direct addresses, for example, __builtin_return_address(0), +(void *)regs->ip. They result in the symbol name with (S) or +without (s) offsets. If KALLSYMS are disabled then the symbol +address is printed instead. + +The ``B`` specifier results in the symbol name with offsets and should be +used when printing stack backtraces. The specifier takes into +consideration the effect of compiler optimisations which may occur +when tail-calls are used and marked with the noreturn GCC attribute. + +Examples:: + + printk("Going to call: %pF\n", gettimeofday); + printk("Going to call: %pF\n", p->func); + printk("%s: called from %pS\n", __func__, (void *)_RET_IP_); + printk("%s: called from %pS\n", __func__, + (void *)__builtin_return_address(0)); + printk("Faulted at %pS\n", (void *)regs->ip); + printk(" %s%pB\n", (reliable ? "" : "? "), (void *)*stack); + +Kernel Pointers +--------------- + +:: + + %pK 01234567 or 0123456789abcdef + +For printing kernel pointers which should be hidden from unprivileged +users. The behaviour of %pK depends on the kptr_restrict sysctl - see +Documentation/sysctl/kernel.txt for more details. + +Unmodified Addresses +-------------------- + +:: + + %px 01234567 or 0123456789abcdef + +For printing pointers when you *really* want to print the address. Please +consider whether or not you are leaking sensitive information about the +kernel memory layout before printing pointers with %px. %px is functionally +equivalent to %lx (or %lu). %px is preferred because it is more uniquely +grep'able. If in the future we need to modify the way the kernel handles +printing pointers we will be better equipped to find the call sites. + +Struct Resources +---------------- + +:: + + %pr [mem 0x60000000-0x6fffffff flags 0x2200] or + [mem 0x0000000060000000-0x000000006fffffff flags 0x2200] + %pR [mem 0x60000000-0x6fffffff pref] or + [mem 0x0000000060000000-0x000000006fffffff pref] + +For printing struct resources. The ``R`` and ``r`` specifiers result in a +printed resource with (R) or without (r) a decoded flags member. + +Passed by reference. + +Physical address types phys_addr_t +---------------------------------- + +:: + + %pa[p] 0x01234567 or 0x0123456789abcdef + +For printing a phys_addr_t type (and its derivatives, such as +resource_size_t) which can vary based on build options, regardless of the +width of the CPU data path. + +Passed by reference. + +DMA address types dma_addr_t +---------------------------- + +:: + + %pad 0x01234567 or 0x0123456789abcdef + +For printing a dma_addr_t type which can vary based on build options, +regardless of the width of the CPU data path. + +Passed by reference. + +Raw buffer as an escaped string +------------------------------- + +:: + + %*pE[achnops] + +For printing raw buffer as an escaped string. For the following buffer:: + + 1b 62 20 5c 43 07 22 90 0d 5d + +A few examples show how the conversion would be done (excluding surrounding +quotes):: + + %*pE "\eb \C\a"\220\r]" + %*pEhp "\x1bb \C\x07"\x90\x0d]" + %*pEa "\e\142\040\\\103\a\042\220\r\135" + +The conversion rules are applied according to an optional combination +of flags (see :c:func:`string_escape_mem` kernel documentation for the +details): + + - a - ESCAPE_ANY + - c - ESCAPE_SPECIAL + - h - ESCAPE_HEX + - n - ESCAPE_NULL + - o - ESCAPE_OCTAL + - p - ESCAPE_NP + - s - ESCAPE_SPACE + +By default ESCAPE_ANY_NP is used. + +ESCAPE_ANY_NP is the sane choice for many cases, in particularly for +printing SSIDs. + +If field width is omitted then 1 byte only will be escaped. + +Raw buffer as a hex string +-------------------------- + +:: + + %*ph 00 01 02 ... 3f + %*phC 00:01:02: ... :3f + %*phD 00-01-02- ... -3f + %*phN 000102 ... 3f + +For printing small buffers (up to 64 bytes long) as a hex string with a +certain separator. For larger buffers consider using +:c:func:`print_hex_dump`. + +MAC/FDDI addresses +------------------ + +:: + + %pM 00:01:02:03:04:05 + %pMR 05:04:03:02:01:00 + %pMF 00-01-02-03-04-05 + %pm 000102030405 + %pmR 050403020100 + +For printing 6-byte MAC/FDDI addresses in hex notation. The ``M`` and ``m`` +specifiers result in a printed address with (M) or without (m) byte +separators. The default byte separator is the colon (:). + +Where FDDI addresses are concerned the ``F`` specifier can be used after +the ``M`` specifier to use dash (-) separators instead of the default +separator. + +For Bluetooth addresses the ``R`` specifier shall be used after the ``M`` +specifier to use reversed byte order suitable for visual interpretation +of Bluetooth addresses which are in the little endian order. + +Passed by reference. + +IPv4 addresses +-------------- + +:: + + %pI4 1.2.3.4 + %pi4 001.002.003.004 + %p[Ii]4[hnbl] + +For printing IPv4 dot-separated decimal addresses. The ``I4`` and ``i4`` +specifiers result in a printed address with (i4) or without (I4) leading +zeros. + +The additional ``h``, ``n``, ``b``, and ``l`` specifiers are used to specify +host, network, big or little endian order addresses respectively. Where +no specifier is provided the default network/big endian order is used. + +Passed by reference. + +IPv6 addresses +-------------- + +:: + + %pI6 0001:0002:0003:0004:0005:0006:0007:0008 + %pi6 00010002000300040005000600070008 + %pI6c 1:2:3:4:5:6:7:8 + +For printing IPv6 network-order 16-bit hex addresses. The ``I6`` and ``i6`` +specifiers result in a printed address with (I6) or without (i6) +colon-separators. Leading zeros are always used. + +The additional ``c`` specifier can be used with the ``I`` specifier to +print a compressed IPv6 address as described by +http://tools.ietf.org/html/rfc5952 + +Passed by reference. + +IPv4/IPv6 addresses (generic, with port, flowinfo, scope) +--------------------------------------------------------- + +:: + + %pIS 1.2.3.4 or 0001:0002:0003:0004:0005:0006:0007:0008 + %piS 001.002.003.004 or 00010002000300040005000600070008 + %pISc 1.2.3.4 or 1:2:3:4:5:6:7:8 + %pISpc 1.2.3.4:12345 or [1:2:3:4:5:6:7:8]:12345 + %p[Ii]S[pfschnbl] + +For printing an IP address without the need to distinguish whether it's of +type AF_INET or AF_INET6. A pointer to a valid struct sockaddr, +specified through ``IS`` or ``iS``, can be passed to this format specifier. + +The additional ``p``, ``f``, and ``s`` specifiers are used to specify port +(IPv4, IPv6), flowinfo (IPv6) and scope (IPv6). Ports have a ``:`` prefix, +flowinfo a ``/`` and scope a ``%``, each followed by the actual value. + +In case of an IPv6 address the compressed IPv6 address as described by +http://tools.ietf.org/html/rfc5952 is being used if the additional +specifier ``c`` is given. The IPv6 address is surrounded by ``[``, ``]`` in +case of additional specifiers ``p``, ``f`` or ``s`` as suggested by +https://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-07 + +In case of IPv4 addresses, the additional ``h``, ``n``, ``b``, and ``l`` +specifiers can be used as well and are ignored in case of an IPv6 +address. + +Passed by reference. + +Further examples:: + + %pISfc 1.2.3.4 or [1:2:3:4:5:6:7:8]/123456789 + %pISsc 1.2.3.4 or [1:2:3:4:5:6:7:8]%1234567890 + %pISpfc 1.2.3.4:12345 or [1:2:3:4:5:6:7:8]:12345/123456789 + +UUID/GUID addresses +------------------- + +:: + + %pUb 00010203-0405-0607-0809-0a0b0c0d0e0f + %pUB 00010203-0405-0607-0809-0A0B0C0D0E0F + %pUl 03020100-0504-0706-0809-0a0b0c0e0e0f + %pUL 03020100-0504-0706-0809-0A0B0C0E0E0F + +For printing 16-byte UUID/GUIDs addresses. The additional ``l``, ``L``, +``b`` and ``B`` specifiers are used to specify a little endian order in +lower (l) or upper case (L) hex notation - and big endian order in lower (b) +or upper case (B) hex notation. + +Where no additional specifiers are used the default big endian +order with lower case hex notation will be printed. + +Passed by reference. + +dentry names +------------ + +:: + + %pd{,2,3,4} + %pD{,2,3,4} + +For printing dentry name; if we race with :c:func:`d_move`, the name might +be a mix of old and new ones, but it won't oops. %pd dentry is a safer +equivalent of %s dentry->d_name.name we used to use, %pd prints ``n`` +last components. %pD does the same thing for struct file. + +Passed by reference. + +block_device names +------------------ + +:: + + %pg sda, sda1 or loop0p1 + +For printing name of block_device pointers. + +struct va_format +---------------- + +:: + + %pV + +For printing struct va_format structures. These contain a format string +and va_list as follows:: + + struct va_format { + const char *fmt; + va_list *va; + }; + +Implements a "recursive vsnprintf". + +Do not use this feature without some mechanism to verify the +correctness of the format string and va_list arguments. + +Passed by reference. + +kobjects +-------- + +:: + + %pOF[fnpPcCF] + + +For printing kobject based structs (device nodes). Default behaviour is +equivalent to %pOFf. + + - f - device node full_name + - n - device node name + - p - device node phandle + - P - device node path spec (name + @unit) + - F - device node flags + - c - major compatible string + - C - full compatible string + +The separator when using multiple arguments is ':' + +Examples:: + + %pOF /foo/bar@0 - Node full name + %pOFf /foo/bar@0 - Same as above + %pOFfp /foo/bar@0:10 - Node full name + phandle + %pOFfcF /foo/bar@0:foo,device:--P- - Node full name + + major compatible string + + node flags + D - dynamic + d - detached + P - Populated + B - Populated bus + +Passed by reference. + +struct clk +---------- + +:: + + %pC pll1 + %pCn pll1 + %pCr 1560000000 + +For printing struct clk structures. %pC and %pCn print the name +(Common Clock Framework) or address (legacy clock framework) of the +structure; %pCr prints the current clock rate. + +Passed by reference. + +bitmap and its derivatives such as cpumask and nodemask +------------------------------------------------------- + +:: + + %*pb 0779 + %*pbl 0,3-6,8-10 + +For printing bitmap and its derivatives such as cpumask and nodemask, +%*pb outputs the bitmap with field width as the number of bits and %*pbl +output the bitmap as range list with field width as the number of bits. + +Passed by reference. + +Flags bitfields such as page flags, gfp_flags +--------------------------------------------- + +:: + + %pGp referenced|uptodate|lru|active|private + %pGg GFP_USER|GFP_DMA32|GFP_NOWARN + %pGv read|exec|mayread|maywrite|mayexec|denywrite + +For printing flags bitfields as a collection of symbolic constants that +would construct the value. The type of flags is given by the third +character. Currently supported are [p]age flags, [v]ma_flags (both +expect ``unsigned long *``) and [g]fp_flags (expects ``gfp_t *``). The flag +names and print order depends on the particular type. + +Note that this format should not be used directly in the +:c:func:`TP_printk()` part of a tracepoint. Instead, use the show_*_flags() +functions from . + +Passed by reference. + +Network device features +----------------------- + +:: + + %pNF 0x000000000000c000 + +For printing netdev_features_t. + +Passed by reference. + +Thanks +====== + +If you add other %p extensions, please extend with +one or more test cases, if at all feasible. + +Thank you for your cooperation and attention. -- cgit