From 79a79c3a0ec2043711577750d4499abf4155d216 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 28 Aug 2018 13:22:10 -0700 Subject: Documentation: dt: keystone: ti-sci: Add optional host-id parameter Texas Instrument's System Control Interface (TISCI) permits the ability for OSs running in virtual machines to be able to independently communicate with the firmware without the need going through an hypervisor. The "host-id" in effect is the hardware representation of the host (example: VMs locked to a core) as identified to the System Controller. Hypervisors can either fill in appropriate host-ids in dt used for each VM instance OR may use prebuilt blobs where the host-ids are pre-populated, as appropriate for the OS running in the VMs. This is introduced as an optional parameter to maintain consistency with legacy device tree blobs. Reviewed-by: Rob Herring Signed-off-by: Nishanth Menon Signed-off-by: Santosh Shilimkar --- Documentation/devicetree/bindings/arm/keystone/ti,sci.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation/devicetree/bindings/arm/keystone') diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt index 31f5f9a104cc..b56a02c10ae6 100644 --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.txt @@ -45,11 +45,15 @@ Optional Properties: debug_messages - Map the Debug message region - reg: register space corresponding to the debug_messages - ti,system-reboot-controller: If system reboot can be triggered by SoC reboot +- ti,host-id: Integer value corresponding to the host ID assigned by Firmware + for identification of host processing entities such as virtual + machines Example (K2G): ------------- pmmc: pmmc { compatible = "ti,k2g-sci"; + ti,host-id = <2>; mbox-names = "rx", "tx"; mboxes= <&msgmgr &msgmgr_proxy_pmmc_rx>, <&msgmgr &msgmgr_proxy_pmmc_tx>; -- cgit