From 785ae7420af3e76a3ba683a297fe81c63d6efa30 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Mon, 30 Sep 2019 13:52:03 +0200 Subject: dt-bindings: bus: simple-pm-bus: convert bindings to json-schema Convert Simple Power-Managed Bus bindings documentation to json-schema. As a side effect of this change only simple-pm-bus is used in example. A follow-up patch will provide an example for the separately documented Renesas Bus State Controller (BSC) that uses "renesas,bsc-sh73a0" and "renesas,bsc" compat strings. Signed-off-by: Simon Horman Signed-off-by: Rob Herring --- .../devicetree/bindings/bus/simple-pm-bus.txt | 44 ---------------------- 1 file changed, 44 deletions(-) delete mode 100644 Documentation/devicetree/bindings/bus/simple-pm-bus.txt (limited to 'Documentation/devicetree/bindings/bus/simple-pm-bus.txt') diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt deleted file mode 100644 index 6f15037131ed..000000000000 --- a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt +++ /dev/null @@ -1,44 +0,0 @@ -Simple Power-Managed Bus -======================== - -A Simple Power-Managed Bus is a transparent bus that doesn't need a real -driver, as it's typically initialized by the boot loader. - -However, its bus controller is part of a PM domain, or under the control of a -functional clock. Hence, the bus controller's PM domain and/or clock must be -enabled for child devices connected to the bus (either on-SoC or externally) -to function. - -While "simple-pm-bus" follows the "simple-bus" set of properties, as specified -in the Devicetree Specification, it is not an extension of "simple-bus". - - -Required properties: - - compatible: Must contain at least "simple-pm-bus". - Must not contain "simple-bus". - It's recommended to let this be preceded by one or more - vendor-specific compatible values. - - #address-cells, #size-cells, ranges: Must describe the mapping between - parent address and child address spaces. - -Optional platform-specific properties for clock or PM domain control (at least -one of them is required): - - clocks: Must contain a reference to the functional clock(s), - - power-domains: Must contain a reference to the PM domain. -Please refer to the binding documentation for the clock and/or PM domain -providers for more details. - - -Example: - - bsc: bus@fec10000 { - compatible = "renesas,bsc-sh73a0", "renesas,bsc", - "simple-pm-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0x20000000>; - reg = <0xfec10000 0x400>; - interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&zb_clk>; - power-domains = <&pd_a4s>; - }; -- cgit