From e576a9a8603f7c6f8fed5159e2fe33f6d67a49e7 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 18 Aug 2023 07:45:04 -0500 Subject: dt-bindings: cpufreq: Convert ti-cpufreq to json schema Move the ti-cpufreq binding over to opp and convert the free text binding to json-schema. Reviewed-by: Dhruva Gole Signed-off-by: Nishanth Menon Reviewed-by: Krzysztof Kozlowski Signed-off-by: Viresh Kumar --- .../devicetree/bindings/cpufreq/ti-cpufreq.txt | 132 --------------------- 1 file changed, 132 deletions(-) delete mode 100644 Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt (limited to 'Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt') diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt deleted file mode 100644 index 1758051798fe..000000000000 --- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt +++ /dev/null @@ -1,132 +0,0 @@ -TI CPUFreq and OPP bindings -================================ - -Certain TI SoCs, like those in the am335x, am437x, am57xx, and dra7xx -families support different OPPs depending on the silicon variant in use. -The ti-cpufreq driver can use revision and an efuse value from the SoC to -provide the OPP framework with supported hardware information. This is -used to determine which OPPs from the operating-points-v2 table get enabled -when it is parsed by the OPP framework. - -Required properties: --------------------- -In 'cpus' nodes: -- operating-points-v2: Phandle to the operating-points-v2 table to use. - -In 'operating-points-v2' table: -- compatible: Should be - - 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx, - omap34xx, omap36xx and am3517 SoCs -- syscon: A phandle pointing to a syscon node representing the control module - register space of the SoC. - -Optional properties: --------------------- -- "vdd-supply", "vbb-supply": to define two regulators for dra7xx -- "cpu0-supply", "vbb-supply": to define two regulators for omap36xx - -For each opp entry in 'operating-points-v2' table: -- opp-supported-hw: Two bitfields indicating: - 1. Which revision of the SoC the OPP is supported by - 2. Which eFuse bits indicate this OPP is available - - A bitwise AND is performed against these values and if any bit - matches, the OPP gets enabled. - -Example: --------- - -/* From arch/arm/boot/dts/am33xx.dtsi */ -cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu@0 { - compatible = "arm,cortex-a8"; - device_type = "cpu"; - reg = <0>; - - operating-points-v2 = <&cpu0_opp_table>; - - clocks = <&dpll_mpu_ck>; - clock-names = "cpu"; - - clock-latency = <300000>; /* From omap-cpufreq driver */ - }; -}; - -/* - * cpu0 has different OPPs depending on SoC revision and some on revisions - * 0x2 and 0x4 have eFuse bits that indicate if they are available or not - */ -cpu0_opp_table: opp-table { - compatible = "operating-points-v2-ti-cpu"; - syscon = <&scm_conf>; - - /* - * The three following nodes are marked with opp-suspend - * because they can not be enabled simultaneously on a - * single SoC. - */ - opp50-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <950000 931000 969000>; - opp-supported-hw = <0x06 0x0010>; - opp-suspend; - }; - - opp100-275000000 { - opp-hz = /bits/ 64 <275000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x01 0x00FF>; - opp-suspend; - }; - - opp100-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x06 0x0020>; - opp-suspend; - }; - - opp100-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - opp100-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1100000 1078000 1122000>; - opp-supported-hw = <0x06 0x0040>; - }; - - opp120-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <1200000 1176000 1224000>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - opp120-720000000 { - opp-hz = /bits/ 64 <720000000>; - opp-microvolt = <1200000 1176000 1224000>; - opp-supported-hw = <0x06 0x0080>; - }; - - oppturbo-720000000 { - opp-hz = /bits/ 64 <720000000>; - opp-microvolt = <1260000 1234800 1285200>; - opp-supported-hw = <0x01 0xFFFF>; - }; - - oppturbo-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1260000 1234800 1285200>; - opp-supported-hw = <0x06 0x0100>; - }; - - oppnitro-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1325000 1298500 1351500>; - opp-supported-hw = <0x04 0x0200>; - }; -}; -- cgit