From edd14218bd663e4dd2f1c8f4eed84f92ada93c9d Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 20 Jul 2019 11:26:07 +0200 Subject: dt-bindings: dmaengine: Convert Allwinner A31 and A64 DMA to a schema The newer Allwinner SoCs have a DMA controller supported in Linux, with a matching Device Tree binding. Now that we have the DT validation in place, let's convert the device tree bindings for that controller over to a YAML schemas. Reviewed-by: Rob Herring Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20190720092607.31095-3-maxime.ripard@bootlin.com Signed-off-by: Vinod Koul --- .../devicetree/bindings/dma/sun6i-dma.txt | 81 ---------------------- 1 file changed, 81 deletions(-) delete mode 100644 Documentation/devicetree/bindings/dma/sun6i-dma.txt (limited to 'Documentation/devicetree/bindings/dma/sun6i-dma.txt') diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt deleted file mode 100644 index cae31f4e77ba..000000000000 --- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt +++ /dev/null @@ -1,81 +0,0 @@ -Allwinner A31 DMA Controller - -This driver follows the generic DMA bindings defined in dma.txt. - -Required properties: - -- compatible: Must be one of - "allwinner,sun6i-a31-dma" - "allwinner,sun8i-a23-dma" - "allwinner,sun8i-a83t-dma" - "allwinner,sun8i-h3-dma" - "allwinner,sun8i-v3s-dma" -- reg: Should contain the registers base address and length -- interrupts: Should contain a reference to the interrupt used by this device -- clocks: Should contain a reference to the parent AHB clock -- resets: Should contain a reference to the reset controller asserting - this device in reset -- #dma-cells : Should be 1, a single cell holding a line request number - -Example: - dma: dma-controller@1c02000 { - compatible = "allwinner,sun6i-a31-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <0 50 4>; - clocks = <&ahb1_gates 6>; - resets = <&ahb1_rst 6>; - #dma-cells = <1>; - }; - ------------------------------------------------------------------------------- -For A64 and H6 DMA controller: - -Required properties: -- compatible: Must be one of - "allwinner,sun50i-a64-dma" - "allwinner,sun50i-h6-dma" -- dma-channels: Number of DMA channels supported by the controller. - Refer to Documentation/devicetree/bindings/dma/dma.txt -- clocks: In addition to parent AHB clock, it should also contain mbus - clock (H6 only) -- clock-names: Should contain "bus" and "mbus" (H6 only) -- all properties above, i.e. reg, interrupts, clocks, resets and #dma-cells - -Optional properties: -- dma-requests: Number of DMA request signals supported by the controller. - Refer to Documentation/devicetree/bindings/dma/dma.txt - -Example: - dma: dma-controller@1c02000 { - compatible = "allwinner,sun50i-a64-dma"; - reg = <0x01c02000 0x1000>; - interrupts = ; - clocks = <&ccu CLK_BUS_DMA>; - dma-channels = <8>; - dma-requests = <27>; - resets = <&ccu RST_BUS_DMA>; - #dma-cells = <1>; - }; ------------------------------------------------------------------------------- - -Clients: - -DMA clients connected to the A31 DMA controller must use the format -described in the dma.txt file, using a two-cell specifier for each -channel: a phandle plus one integer cells. -The two cells in order are: - -1. A phandle pointing to the DMA controller. -2. The port ID as specified in the datasheet - -Example: -spi2: spi@1c6a000 { - compatible = "allwinner,sun6i-a31-spi"; - reg = <0x01c6a000 0x1000>; - interrupts = <0 67 4>; - clocks = <&ahb1_gates 22>, <&spi2_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma 25>, <&dma 25>; - dma-names = "rx", "tx"; - resets = <&ahb1_rst 22>; -}; -- cgit