From f33dabf59d6cf6b4ce48e1552ae84092a4f753df Mon Sep 17 00:00:00 2001 From: Alain Volmat Date: Thu, 21 Nov 2019 14:27:46 +0100 Subject: dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml The document was migrated to Yaml format and renamed st,stm32-i2c.yaml Signed-off-by: Alain Volmat Signed-off-by: Rob Herring --- .../devicetree/bindings/i2c/i2c-stm32.txt | 65 ---------------------- 1 file changed, 65 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-stm32.txt (limited to 'Documentation/devicetree/bindings/i2c/i2c-stm32.txt') diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt deleted file mode 100644 index ce3df2fff6c8..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt +++ /dev/null @@ -1,65 +0,0 @@ -* I2C controller embedded in STMicroelectronics STM32 I2C platform - -Required properties: -- compatible: Must be one of the following - - "st,stm32f4-i2c" - - "st,stm32f7-i2c" -- reg: Offset and length of the register set for the device -- interrupts: Must contain the interrupt id for I2C event and then the - interrupt id for I2C error. -- resets: Must contain the phandle to the reset controller. -- clocks: Must contain the input clock of the I2C instance. -- A pinctrl state named "default" must be defined to set pins in mode of - operation for I2C transfer -- #address-cells = <1>; -- #size-cells = <0>; - -Optional properties: -- clock-frequency: Desired I2C bus clock frequency in Hz. If not specified, - the default 100 kHz frequency will be used. - For STM32F4 SoC Standard-mode and Fast-mode are supported, possible values are - 100000 and 400000. - For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode, Fast-mode and Fast-mode - Plus are supported, possible values are 100000, 400000 and 1000000. -- dmas: List of phandles to rx and tx DMA channels. Refer to stm32-dma.txt. -- dma-names: List of dma names. Valid names are: "rx" and "tx". -- i2c-scl-rising-time-ns: I2C SCL Rising time for the board (default: 25) - For STM32F7, STM32H7 and STM32MP1 only. -- i2c-scl-falling-time-ns: I2C SCL Falling time for the board (default: 10) - For STM32F7, STM32H7 and STM32MP1 only. - I2C Timings are derived from these 2 values -- st,syscfg-fmp: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode - Plus speed is selected by slave. - 1st cell: phandle to syscfg - 2nd cell: register offset within SYSCFG - 3rd cell: register bitmask for FMP bit - For STM32F7, STM32H7 and STM32MP1 only. - -Example: - - i2c@40005400 { - compatible = "st,stm32f4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x40005400 0x400>; - interrupts = <31>, - <32>; - resets = <&rcc 277>; - clocks = <&rcc 0 149>; - pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>; - pinctrl-names = "default"; - }; - - i2c@40005400 { - compatible = "st,stm32f7-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x40005400 0x400>; - interrupts = <31>, - <32>; - resets = <&rcc STM32F7_APB1_RESET(I2C1)>; - clocks = <&rcc 1 CLK_I2C1>; - pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>; - pinctrl-names = "default"; - st,syscfg-fmp = <&syscfg 0x4 0x1>; - }; -- cgit