From 4a7a08226dd590a139e5f7835fe93f90b3beee90 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Thu, 19 Mar 2015 13:16:46 +0200 Subject: i2c: add support for the Digicolor I2C controller The CX92755 is an SoC in the Conexant Digicolor series. The devicetree binding document describes the I2C controller on the CX92755 SoC, that is also shared by some other SoCs in the Digicolor series. The driver adds support. Signed-off-by: Baruch Siach [wsa: fixed spaces around operators] Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-digicolor.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-digicolor.txt (limited to 'Documentation/devicetree/bindings/i2c') diff --git a/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt b/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt new file mode 100644 index 000000000000..457a098d4f7e --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-digicolor.txt @@ -0,0 +1,25 @@ +Conexant Digicolor I2C controller + +Required properties: + - compatible: must be "cnxt,cx92755-i2c" + - reg: physical address and length of the device registers + - interrupts: a single interrupt specifier + - clocks: clock for the device + - #address-cells: should be <1> + - #size-cells: should be <0> + +Optional properties: +- clock-frequency: the desired I2C bus clock frequency in Hz; in + absence of this property the default value is used (100 kHz). + +Example: + + i2c: i2c@f0000120 { + compatible = "cnxt,cx92755-i2c"; + reg = <0xf0000120 0x10>; + interrupts = <28>; + clocks = <&main_clk>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + }; -- cgit From ba92222ed63a12d09120df9b92f56cc990abac19 Mon Sep 17 00:00:00 2001 From: Zubair Lutfullah Kakakhel Date: Tue, 31 Mar 2015 14:03:55 +0100 Subject: i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780 Adds the i2c bus controller driver for the Ingenic JZ4780 SoC. Signed-off-by: Zubair Lutfullah Kakakhel Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-jz4780.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-jz4780.txt (limited to 'Documentation/devicetree/bindings/i2c') diff --git a/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt new file mode 100644 index 000000000000..231e4cc4008c --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-jz4780.txt @@ -0,0 +1,35 @@ +* Ingenic JZ4780 I2C Bus controller + +Required properties: +- compatible: should be "ingenic,jz4780-i2c" +- reg: Should contain the address & size of the I2C controller registers. +- interrupts: Should specify the interrupt provided by parent. +- clocks: Should contain a single clock specifier for the JZ4780 I2C clock. +- clock-frequency: desired I2C bus clock frequency in Hz. + +Recommended properties: +- pinctrl-names: should be "default"; +- pinctrl-0: phandle to pinctrl function + +Optional properties: +- interrupt-parent: Should be the phandle of the interrupt controller that + delivers interrupts to the I2C block. + +Example + +/ { + i2c4: i2c4@0x10054000 { + compatible = "ingenic,jz4780-i2c"; + reg = <0x10054000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <56>; + + clocks = <&cgu JZ4780_CLK_SMB4>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c4_data>; + + }; +}; + -- cgit From 7ef97e9a312c359a2b32a7b5d918c60f238b69b2 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Mon, 6 Apr 2015 15:38:41 +0300 Subject: i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Having a board where the I2C bus locks up occasionally made it clear that the bus recovery in the i2c-davinci driver will only work on some boards, because on regular boards, this will only toggle GPIO lines that aren't muxed to the actual pins. The I2C controller on SoCs like da850 (and da830), Keystone 2 has the built-in capability to bit-bang its lines by using the ICPFUNC registers of the i2c controller. Implement the suggested procedure by toggling SCL and checking SDA using the ICPFUNC registers of the I2C controller when present. Allow platforms to indicate the presence of the ICPFUNC registers with a has_pfunc platform data flag and add optional DT property "ti,has-pfunc" to indicate the same in DT. Reviewed-by: Uwe Kleine-König Acked-by: Alexander Sverdlin Tested-by: Michael Lawnick Signed-off-by: Ben Gardiner Signed-off-by: Mike Looijmans [grygorii.strashko@ti.com: combined patches from Ben Gardiner and Mike Looijmans and reimplemented ICPFUNC bus recovery using I2C bus recovery infrastructure] Signed-off-by: Grygorii Strashko Signed-off-by: Wolfram Sang --- Documentation/devicetree/bindings/i2c/i2c-davinci.txt | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation/devicetree/bindings/i2c') diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt index 2dc935b4113d..a4e1cbc810c1 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt @@ -10,6 +10,9 @@ Required properties: Recommended properties : - interrupts : standard interrupt property. - clock-frequency : desired I2C bus clock frequency in Hz. +- ti,has-pfunc: boolean; if defined, it indicates that SoC supports PFUNC + registers. PFUNC registers allow to switch I2C pins to function as + GPIOs, so they can by toggled manually. Example (enbw_cmc board): i2c@1c22000 { -- cgit From 2bbd681ba2bfa0f3805fb541b0840b96893c5727 Mon Sep 17 00:00:00 2001 From: Subhendu Sekhar Behera Date: Wed, 18 Mar 2015 17:20:29 +0530 Subject: i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller Add an I2C bus driver i2c-xlp9xx.c to support the I2C block in the XLP9xx/XLP5xx MIPS SoC. Update Kconfig and Makefile to add the CONFIG_I2C_XLP9XX option. Signed-off-by: Subhendu Sekhar Behera Signed-off-by: Jayachandran C Reviewed-by: Ray Jui Signed-off-by: Wolfram Sang --- .../devicetree/bindings/i2c/i2c-xlp9xx.txt | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) create mode 100644 Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt (limited to 'Documentation/devicetree/bindings/i2c') diff --git a/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt b/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt new file mode 100644 index 000000000000..f818ef507ab7 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt @@ -0,0 +1,22 @@ +Device tree configuration for the I2C controller on the XLP9xx/5xx SoC + +Required properties: +- compatible : should be "netlogic,xlp980-i2c" +- reg : bus address start and address range size of device +- interrupts : interrupt number + +Optional properties: +- clock-frequency : frequency of bus clock in Hz + Defaults to 100 KHz when the property is not specified + +Example: + +i2c0: i2c@113100 { + compatible = "netlogic,xlp980-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x113100 0x100>; + clock-frequency = <400000>; + interrupts = <30>; + interrupt-parent = <&pic>; +}; -- cgit