From 644291ebecd1355363f4b7a39dc115828643b901 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 3 Dec 2021 14:58:26 +0100 Subject: dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings While Linux uses a different driver, the Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller Device Tree binding documentation is very similar. - Drop the fixed reg value, as some controllers use a different address, - Make reset-gpios optional, as it is not always wired. Signed-off-by: Geert Uytterhoeven Reviewed-by: Rob Herring Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/0c5f06c9d262c1720b40d068b6eefe58ca406601.1638539806.git.geert+renesas@glider.be --- .../devicetree/bindings/input/ilitek,ili2xxx.txt | 27 ---------------------- 1 file changed, 27 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt (limited to 'Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt') diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt deleted file mode 100644 index cdcaa3f52d25..000000000000 --- a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt +++ /dev/null @@ -1,27 +0,0 @@ -Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller - -Required properties: -- compatible: - ilitek,ili210x for ILI210x - ilitek,ili2117 for ILI2117 - ilitek,ili2120 for ILI2120 - ilitek,ili251x for ILI251x - -- reg: The I2C address of the device - -- interrupts: The sink for the touchscreen's IRQ output - See ../interrupt-controller/interrupts.txt - -Optional properties for main touchpad device: - -- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low) - -Example: - - touchscreen@41 { - compatible = "ilitek,ili251x"; - reg = <0x41>; - interrupt-parent = <&gpio4>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; - }; -- cgit