From eb3fcf007fffe5830d815e713591f3e858f2a365 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 1 Oct 2015 22:24:09 -0500 Subject: dt-bindings: consolidate interrupt controller bindings Move various interrupt controller bindings into the interrupt-controller/ directory. Signed-off-by: Rob Herring Cc: Matthias Brugger Cc: linux-mediatek@lists.infradead.org --- .../bindings/interrupt-controller/ti,cp-intc.txt | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt (limited to 'Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt') diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt new file mode 100644 index 000000000000..597e8a089fe4 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,cp-intc.txt @@ -0,0 +1,27 @@ +* TI Common Platform Interrupt Controller + +Common Platform Interrupt Controller (cp_intc) is used on +OMAP-L1x SoCs and can support several configurable number +of interrupts. + +Main node required properties: + +- compatible : should be: + "ti,cp-intc" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The type shall be a and the value shall be 1. + + The cell contains the interrupt number in the range [0-128]. +- ti,intc-size: Number of interrupts handled by the interrupt controller. +- reg: physical base address and size of the intc registers map. + +Example: + + intc: interrupt-controller@1 { + compatible = "ti,cp-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <101>; + reg = <0xfffee000 0x2000>; + }; -- cgit