From 0cd1b0c3adaac2f9e8b5d2e739bf63a42fbf7ff2 Mon Sep 17 00:00:00 2001 From: Olliver Schinagl Date: Wed, 21 Jan 2015 13:33:47 -0800 Subject: leds: Let the binding document example for leds-gpio follow the gpio bindings In the gpio bindings documents it is requested to use the marco's in include/dt-bindings/gpio/gpio.h whenever possible. The gpios in the led drivers don't seem to form an exception, so update the example in the document bindings. Signed-off-by: Olliver Schinagl Acked-by: Rob Herring Acked-by: Linus Walleij Signed-off-by: Bryan Wu --- Documentation/devicetree/bindings/leds/leds-gpio.txt | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'Documentation/devicetree/bindings/leds/leds-gpio.txt') diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt index f77148f372ea..fea1ebfe24a9 100644 --- a/Documentation/devicetree/bindings/leds/leds-gpio.txt +++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt @@ -26,16 +26,18 @@ LED sub-node properties: Examples: +#include + leds { compatible = "gpio-leds"; hdd { label = "IDE Activity"; - gpios = <&mcu_pio 0 1>; /* Active low */ + gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "ide-disk"; }; fault { - gpios = <&mcu_pio 1 0>; + gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>; /* Keep LED on if BIOS detected hardware fault */ default-state = "keep"; }; @@ -44,11 +46,11 @@ leds { run-control { compatible = "gpio-leds"; red { - gpios = <&mpc8572 6 0>; + gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>; default-state = "off"; }; green { - gpios = <&mpc8572 7 0>; + gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; @@ -57,7 +59,7 @@ leds { compatible = "gpio-leds"; charger-led { - gpios = <&gpio1 2 0>; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "max8903-charger-charging"; retain-state-suspended; }; -- cgit