From a1ccca0e84243c8aa39f4700cecc200b36c6b50f Mon Sep 17 00:00:00 2001 From: Maxime Jourdan Date: Thu, 6 Jun 2019 12:05:10 -0400 Subject: media: dt-bindings: media: add Amlogic Video Decoder Bindings Add documentation for the meson vdec dts node. Signed-off-by: Maxime Jourdan Reviewed-by: Rob Herring Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- .../devicetree/bindings/media/amlogic,vdec.txt | 71 ++++++++++++++++++++++ 1 file changed, 71 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/amlogic,vdec.txt (limited to 'Documentation/devicetree/bindings/media') diff --git a/Documentation/devicetree/bindings/media/amlogic,vdec.txt b/Documentation/devicetree/bindings/media/amlogic,vdec.txt new file mode 100644 index 000000000000..aabdd01bcf32 --- /dev/null +++ b/Documentation/devicetree/bindings/media/amlogic,vdec.txt @@ -0,0 +1,71 @@ +Amlogic Video Decoder +================================ + +The video decoding IP lies within the DOS memory region, +except for the hardware bitstream parser that makes use of an undocumented +region. + +It makes use of the following blocks: + +- ESPARSER is a bitstream parser that outputs to a VIFIFO. Further VDEC blocks +then feed from this VIFIFO. +- VDEC_1 can decode MPEG-1, MPEG-2, MPEG-4 part 2, MJPEG, H.263, H.264, VC-1. +- VDEC_HEVC can decode HEVC and VP9. + +Both VDEC_1 and VDEC_HEVC share the "vdec" IRQ and as such cannot run +concurrently. + +Device Tree Bindings: +--------------------- + +VDEC: Video Decoder +-------------------------- + +Required properties: +- compatible: value should be different for each SoC family as : + - GXBB (S905) : "amlogic,gxbb-vdec" + - GXL (S905X, S905D) : "amlogic,gxl-vdec" + - GXM (S912) : "amlogic,gxm-vdec" +- reg: base address and size of he following memory-mapped regions : + - dos + - esparser +- reg-names: should contain the names of the previous memory regions +- interrupts: should contain the following IRQs: + - vdec + - esparser +- interrupt-names: should contain the names of the previous interrupts +- amlogic,ao-sysctrl: should point to the AOBUS sysctrl node +- amlogic,canvas: should point to a canvas provider node +- clocks: should contain the following clocks : + - dos_parser + - dos + - vdec_1 + - vdec_hevc +- clock-names: should contain the names of the previous clocks +- resets: should contain the parser reset +- reset-names: should be "esparser" + +Example: + +vdec: video-decoder@c8820000 { + compatible = "amlogic,gxbb-vdec"; + reg = <0x0 0xc8820000 0x0 0x10000>, + <0x0 0xc110a580 0x0 0xe4>; + reg-names = "dos", "esparser"; + + interrupts = , + ; + interrupt-names = "vdec", "esparser"; + + amlogic,ao-sysctrl = <&sysctrl_AO>; + amlogic,canvas = <&canvas>; + + clocks = <&clkc CLKID_DOS_PARSER>, + <&clkc CLKID_DOS>, + <&clkc CLKID_VDEC_1>, + <&clkc CLKID_VDEC_HEVC>; + clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; + + resets = <&reset RESET_PARSER>; + reset-names = "esparser"; +}; -- cgit