From 6436356ba156b909c34a72e2905d9a9a874ca8e1 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 23 Apr 2012 11:23:41 +0200 Subject: mtd: mxc_nand: implement device tree probing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is tested on i.MX27. Signed-off-by: Uwe Kleine-König Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- Documentation/devicetree/bindings/mtd/mxc-nand.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/mxc-nand.txt (limited to 'Documentation/devicetree/bindings/mtd') diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.txt b/Documentation/devicetree/bindings/mtd/mxc-nand.txt new file mode 100644 index 000000000000..b5833d11c7be --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/mxc-nand.txt @@ -0,0 +1,19 @@ +* Freescale's mxc_nand + +Required properties: +- compatible: "fsl,imxXX-nand" +- reg: address range of the nfc block +- interrupts: irq to be used +- nand-bus-width: see nand.txt +- nand-ecc-mode: see nand.txt +- nand-on-flash-bbt: see nand.txt + +Example: + + nand@d8000000 { + compatible = "fsl,imx27-nand"; + reg = <0xd8000000 0x1000>; + interrupts = <29>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + }; -- cgit From e10db1f00a5e3c2ec04d7fe26c7444dc55a59b19 Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Fri, 4 May 2012 21:42:05 -0400 Subject: mtd: gpmi: add device tree support to gpmi-nand This patch just adds the DT support to gpmi-nand. Signed-off-by: Huang Shijie Signed-off-by: Huang Shijie Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- .../devicetree/bindings/mtd/gpmi-nand.txt | 33 ++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/gpmi-nand.txt (limited to 'Documentation/devicetree/bindings/mtd') diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt new file mode 100644 index 000000000000..1a5bbd346d22 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt @@ -0,0 +1,33 @@ +* Freescale General-Purpose Media Interface (GPMI) + +The GPMI nand controller provides an interface to control the +NAND flash chips. We support only one NAND chip now. + +Required properties: + - compatible : should be "fsl,-gpmi-nand" + - reg : should contain registers location and length for gpmi and bch. + - reg-names: Should contain the reg names "gpmi-nand" and "bch" + - interrupts : The first is the DMA interrupt number for GPMI. + The second is the BCH interrupt number. + - interrupt-names : The interrupt names "gpmi-dma", "bch"; + - fsl,gpmi-dma-channel : Should contain the dma channel it uses. + +The device tree may optionally contain sub-nodes describing partitions of the +address space. See partition.txt for more detail. + +Examples: + +gpmi-nand@8000c000 { + compatible = "fsl,imx28-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <88>, <41>; + interrupt-names = "gpmi-dma", "bch"; + fsl,gpmi-dma-channel = <4>; + + partition@0 { + ... + }; +}; -- cgit