From c7ee3a40e76c06e1e9a78d8f1a50bc06e63753de Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Wed, 6 Jan 2021 22:32:00 +0100 Subject: dt-bindings: net: convert Broadcom Starfighter 2 binding to the json-schema MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This helps validating DTS files. Only the current (not deprecated one) binding was converted. Minor changes: 1. Dropped dsa/dsa.txt references 2. Updated node name to match dsa.yaml requirement 3. Fixed 2 typos in examples The new binding was validated using the dt_binding_check. Signed-off-by: Rafał Miłecki Link: https://lore.kernel.org/r/20210106213202.17459-1-zajec5@gmail.com Signed-off-by: Jakub Kicinski --- .../bindings/net/brcm,bcm7445-switch-v4.0.txt | 101 +-------------------- 1 file changed, 3 insertions(+), 98 deletions(-) (limited to 'Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt') diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt index 97ca62b0e14d..d0935d2afef8 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt @@ -1,108 +1,13 @@ * Broadcom Starfighter 2 integrated swich -Required properties: +See dsa/brcm,bcm7445-switch-v4.0.yaml for the documentation. -- compatible: should be one of - "brcm,bcm7445-switch-v4.0" - "brcm,bcm7278-switch-v4.0" - "brcm,bcm7278-switch-v4.8" -- reg: addresses and length of the register sets for the device, must be 6 - pairs of register addresses and lengths -- interrupts: interrupts for the devices, must be two interrupts -- #address-cells: must be 1, see dsa/dsa.txt -- #size-cells: must be 0, see dsa/dsa.txt - -Deprecated binding required properties: +*Deprecated* binding required properties: - dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt - dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt - #address-cells: must be 2, see dsa/dsa.txt -Subnodes: - -The integrated switch subnode should be specified according to the binding -described in dsa/dsa.txt. - -Optional properties: - -- reg-names: litteral names for the device base register addresses, when present - must be: "core", "reg", "intrl2_0", "intrl2_1", "fcb", "acb" - -- interrupt-names: litternal names for the device interrupt lines, when present - must be: "switch_0" and "switch_1" - -- brcm,num-gphy: specify the maximum number of integrated gigabit PHYs in the - switch - -- brcm,num-rgmii-ports: specify the maximum number of RGMII interfaces supported - by the switch - -- brcm,fcb-pause-override: boolean property, if present indicates that the switch - supports Failover Control Block pause override capability - -- brcm,acb-packets-inflight: boolean property, if present indicates that the switch - Admission Control Block supports reporting the number of packets in-flight in a - switch queue - -- resets: a single phandle and reset identifier pair. See - Documentation/devicetree/bindings/reset/reset.txt for details. - -- reset-names: If the "reset" property is specified, this property should have - the value "switch" to denote the switch reset line. - -- clocks: when provided, the first phandle is to the switch's main clock and - is valid for both BCM7445 and BCM7278. The second phandle is only applicable - to BCM7445 and is to support dividing the switch core clock. - -- clock-names: when provided, the first phandle must be "sw_switch", and the - second must be named "sw_switch_mdiv". - -Port subnodes: - -Optional properties: - -- brcm,use-bcm-hdr: boolean property, if present, indicates that the switch - port has Broadcom tags enabled (per-packet metadata) - -Example: - -switch_top@f0b00000 { - compatible = "simple-bus"; - #size-cells = <1>; - #address-cells = <1>; - ranges = <0 0xf0b00000 0x40804>; - - ethernet_switch@0 { - compatible = "brcm,bcm7445-switch-v4.0"; - #size-cells = <0>; - #address-cells = <1>; - reg = <0x0 0x40000 - 0x40000 0x110 - 0x40340 0x30 - 0x40380 0x30 - 0x40400 0x34 - 0x40600 0x208>; - reg-names = "core", "reg", intrl2_0", "intrl2_1", - "fcb, "acb"; - interrupts = <0 0x18 0 - 0 0x19 0>; - brcm,num-gphy = <1>; - brcm,num-rgmii-ports = <2>; - brcm,fcb-pause-override; - brcm,acb-packets-inflight; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - label = "gphy"; - reg = <0>; - }; - }; - }; -}; - Example using the old DSA DeviceTree binding: switch_top@f0b00000 { @@ -132,7 +37,7 @@ switch_top@f0b00000 { switch@0 { reg = <0 0>; #size-cells = <0>; - #address-cells <1>; + #address-cells = <1>; port@0 { label = "gphy"; -- cgit