From 3c57b3954701fbbac954986198edb030d84873e0 Mon Sep 17 00:00:00 2001 From: Lars Poeschel Date: Tue, 29 Oct 2019 15:45:58 +0100 Subject: nfc: pn532: Add uart phy docs and rename it This adds documentation about the uart phy to the pn532 binding doc. As the filename "pn533-i2c.txt" is not appropriate any more, rename it to the more general "pn532.txt". This also documents the deprecation of the compatible strings ending with "...-i2c". Cc: Johan Hovold Cc: Simon Horman Reviewed-by: Rob Herring Signed-off-by: Lars Poeschel Signed-off-by: David S. Miller --- .../devicetree/bindings/net/nfc/pn532.txt | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/nfc/pn532.txt (limited to 'Documentation/devicetree/bindings/net/nfc/pn532.txt') diff --git a/Documentation/devicetree/bindings/net/nfc/pn532.txt b/Documentation/devicetree/bindings/net/nfc/pn532.txt new file mode 100644 index 000000000000..a5507dc499bc --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/pn532.txt @@ -0,0 +1,46 @@ +* NXP Semiconductors PN532 NFC Controller + +Required properties: +- compatible: Should be + - "nxp,pn532" Place a node with this inside the devicetree node of the bus + where the NFC chip is connected to. + Currently the kernel has phy bindings for uart and i2c. + - "nxp,pn532-i2c" (DEPRECATED) only works for the i2c binding. + - "nxp,pn533-i2c" (DEPRECATED) only works for the i2c binding. + +Required properties if connected on i2c: +- clock-frequency: I²C work frequency. +- reg: for the I²C bus address. This is fixed at 0x24 for the PN532. +- interrupts: GPIO interrupt to which the chip is connected + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. + +Example (for ARM-based BeagleBone with PN532 on I2C2): + +&i2c2 { + + + pn532: nfc@24 { + + compatible = "nxp,pn532"; + + reg = <0x24>; + clock-frequency = <400000>; + + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + + }; +}; + +Example (for PN532 connected via uart): + +uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + + pn532: nfc { + compatible = "nxp,pn532"; + }; +}; -- cgit